Brochure

The New Paradigm
The PLASMA UNIT
When electronically charged the transformer that is integrated into the device applies a high voltage
to the electrode plates thereby generating plasma.
The plasmaNorm module containing the Plasma Reactor when electronically charged, removes
odours caused by cooking in a domestic kitchen.
The Breakthrough for Residential Applications
ORIGINATING from the Space and Military Industry, the plasmaNorm technology was further developed
for the elimination of odours in restaurant and food processing industries.
In many European cities it is necessary to install plasma units in restaurants and food establishments
that will handle up to 60,000 cubic metres per hour so the residents are not subjected to unhealthy odours
and pollutants.
Plasma Reactor
Directly situated above the fan are the electrode plates. The transformer integrated into the device applies
a high voltage to the electrode plates thereby generating plasma. The plasma occurs as a result of the
extended supply of energy to the gaseous air. When contaminated air passes through an electromagnetic
field created by plasmaNorm, the micro or non-thermal reaction causes oxidation of odour molecules
changing them into oxygen and carbon dioxide.
Now in kitchens that cannot be vented to the outside atmosphere in apartment buildings or when
the kitchen is in the centre of the house, a rangehood with a plasma unit in it will clear the air of all the
by-products of cooking so all of those offensive odours are removed from the atmosphere.
plasmaNorm plasma
air purification technology
Rangecraft uses the revolutionary plasmaNorm
plasma air purification technology to effectively
and permanently remove the by-products of
cooking. Originating from the need for clean
air in space travel, the plasmaNorm technology
was developed for the effective elimination
of odours.
How does it work?
There are three basic forms of matter:
• gas
• liquid
• solid
The fourth form of matter – Plasma
• can only be achieved by adding energy
• a plasma state of matter also generates free
electrons and ionized atoms.
Plasma is the state of matter similar to gas
in which a certain portion of particles are
ionized. The plasmaNorm system induces
the state in plasma cells by introducing
an electromagnetic field to gas. Gas particles
inside the system then become highly charged
and react with the organic molecules created
from cooking to convert them into oxygen and
carbon dioxide.
plasmaNorm Process
Grease Filter
Plasma
Chemical Reaction
Carbon Filter
O2
Vapour
C xH y
CO2
H 2O
H 2O
Odour molecules,
spores, bacteria,
viruses, germs, etc.
H 2O
O2
Barrier discharge spilt molecules
plasmaNorm Function Scheme
plasmaNorm system three stages of extraction
1. Filtration – through the standard stainless steel grease filter.
2. P
lasma – odour molecules undergo a cold combustion process by reacting
with plasma. These molecules are oxidized and then decomposed into
oxygen, carbon dioxide and water molecules.
3. A
ctivated Carbon – resultant molecules then pass through
activated carbon filtration. The plasma effect triggers a
charcoal regenerating reaction resulting in a prolonged
lifecycle of the filter for up to 5 years.
Photo courtesy of Complete Kitchens
Ground breaking technology
plasmaNorm is the only specialist provider of air solutions that guarantees to remove odours
permanently. The revolutionary plasmaNorm filter contains atmospheric, normal-pressure plasma.
It clears the air of cooking odours, solvents and fine particles, with built-in air sterilization. As a
filter of intake, ambient or exhaust air, plasmaNorm has undergone long-term, real-life operational
testing in the catering and food industries.
How plasmaNorm works
Particles and dust are pre-filtered; the pollutant gases subsequently oxidise through
‘cold combustion’ in atmospheric, normal-pressure plasma. Odour molecules are decomposed
at the molecular level. Non-combusted compounds become caught in an activated carbon
storage system. The activated carbon, located downstream, acts as a storage reactor that
continually regenerates itself by means of plasma flow and, for example, converts ozone back
into atmospheric oxygen.
The benefits to everyone
Now for people living in apartments that cannot exhaust the kitchen odours effectively or have
a recirculating rangehood that does not clear the air and are left with unpleasant odours, the
plasma unit offers a positive solution. Residences that are classified by the national trust, state
or local council regulations can put a effective rangehood that will allow them to enjoy all the
different cuisines offered today. Large apartments with difficult body corporate’s now can avoid
the arguments and delays that most experience.
Rangecraft specifications
Advice on usage and installation.
Fan is an AC centrifugal type forward curved, dual inlet with housing.
High speed 750 cubic metres per hour (210 litres per second).
Low speed 150 cubic metres per hour (40 litres per second).
Motor - 194 Watt.
Outlet - 150mm diameter.
Duct Size - 150mm diameter minimum.
Duct type must be rigid.
Do not use flexible ducting as this can reduce airflow by up to 50%.
Ducting used must be non-flammable.
Plasma unit can be attached to the outlet of the motor in the rangehood or can be located away from the hood up to 6 metres.
The connection from the hood to the plasma unit must be rigid ducting of 150mm diameter.
Air outlet from plasma unit must be at least 400 square centimetres through the top of the cupboards or the front of the
cupboards. Return air must come back into the room with the hood in it. This is necessary to ensure all the residual
odours are removed.
The Rangecraft rangehoods are made to be incorporated in kitchens where ducting cannot be
installed to the outside atmosphere.
They will do the job over all standard electric, gas and induction hotplates from 60cm to
120cm wide.
Important note is that they do not have the capacity to do the job over indoor barbecues,
high speed gas burners or hotplates with a heat output rating over 40 mega joule.
Always check with a representative from Condari P/L if there is any doubt about the hood doing
a satisfactory job.
When finished cooking the rangehood can be turned to a low speed and any residual odours from
the food preparation will be cleared in about 30 minutes.
Ceiling
Ceiling
150mm
dia.
150mm
diameter
Maximum
6 metres
RDR-900
Maximum
6 metres

Rangecraft
ducting pieces
available
RDR-450


RDL-300


RDL-600
RDL-900
The models available are listed below and the drawings are on the following pages in this leaflet.
All these rangehoods are made of stainless steel.
RPSO 60 - 1T Slide out 60cm rangehood
RPSO 90 - 1T Slide out 90cm rangehood
RPCP 60 - 1T Compact style 60cm rangehood
RPCP 90 - 1T Compact style 90cm rangehood
RPUC 60 - 1T Under cupboard 60cm rangehood
RPUC 90 - 1T Under cupboard 90cm rangehood
RPWP 60 - 1T 60cm rangehood over induction
RPWP 100 - 1T 100cm rangehood over induction
RPEP 60 - 1T 60cm rangehood over induction
RPEP 100 - 1T 100cm rangehood over induction
In many existing kitchens there is a need to get rid of offensive odours and it may be necessary
to design a special rangehood to suit the existing kitchen cupboards.
This is a special service provided by Condari P/L and also for the installation.
RPSO Specification Sheet
Concealed
Slidehood
Out Hood
RPSO Concealed
slide out
RANGECRAFT
RANGEHOODS
RPSO 60 - 1 221
RPSO 60-1
897
38
20
170
276
515
395
120
600
Power Entry
Plasma unit may be mounted
up to 6 metres from rangehood.
MODEL
BODY WIDTH
RPSO 60-1 600mm FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE
Electrical Connection is to be at the
Box Inside
thexRangehood
515mm 1
-
1Junction
514mm
177mm
Body Width
No Lights
Model
Fanbox Width
515mm
RPSO
60-1
600mm
1
Plasma unit may be mounted up to 6 metres from rangehood.
Electrical connection is by a 10 Amp power lead with a 3 pin plug.
Light Centres
-
No Filters
1
Filter Size
514mm x 177mm
02.05.2014
RANGECRAFT
RANGEHOODS
RPSO 90 - 1 RPSO Specification Sheet
Out Hood
RPSOConcealedConcealed
slide outSlide
hood
221
RPSO 90-1
897
38
20
170
276
515
395
120
900
Power
Entry
Plasma unit may be mounted
up to 6 metres from rangehood.
Electrical Connection is to be at the
FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE
Junction Box Inside the Rangehood
RPSO 90-1Model
900mm Body Width
515mmFanbox
2
320mm
2
177mm
No Lights
Light Centres
Width
No Filters 407mm xFilter
Size
515mm
RPSO 90-1
900mm
320mm
407mm x 177mm
2
2
MODEL
BODY WIDTH
Plasma unit may be mounted up to 6 metres from rangehood.
Electrical connection is by a 10 Amp power lead with a 3 pin plug.
02.05.2014
RPCP Specification Sheet
Stainless Steel Fascia
RANGEHOODS
RPCP 60 - 1 Stainless steel RPCP
fascia with concealed
motorbox
With Concealed
Motorbox
RANGECRAFT
221
RPCP 60-1
946
435
280
510
415
600
100
Power Entry
Plasma unit may be mounted
up to 6 metres from rangehood.
is to be at the
FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO Electrical
FILTERSConnection
FILTER SIZE
Junction Box Inside the Rangehood
RPCP 60-1
600mm Body Width
435mmFanbox
1
-
355mm
No Lights
Light Centres 2 No Filters 272mm xFilter
Model
Width
size
RPCP 60-1
600mm
435mm
1
272mm x 355mm
2
MODEL
BODY WIDTH
Plasma unit may be mounted up to 6 metres from rangehood.
Electrical connection is to be at the Junction Box inside the rangehood.
02.05.2014
RPCP Specification Sheet
Stainless Steel Fascia
RANGEHOODS
RPCP
RPCP 90 - 1 Stainless steel fascia with concealed
motorbox
With Concealed
Motorbox
RANGECRAFT
221
RPCP 90-1
946
280
435
510
415
900
100
Power Entry
Plasma unit may be mounted
up to 6 metres from rangehood.
MODEL
BODY WIDTH
RPCP 90-1Model
900mm RPCP 90-1
Electrical Connection is to be at the
FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO Junction
FILTERS
SIZE
BoxFILTER
Inside the
Rangehood
Body Width
435mm Fanbox Width
2
900mm
435mm
No Lights
Centres2 525mm Light
525mm
2
Plasma unit may be mounted up to 6 metres from rangehood.
Electrical connection is to be at the Junction Box inside the rangehood.
No Filters 422mm xFilter
Size
355mm
422mm x 355mm
2
02.05.2014
RPUC Specification Sheet
Concealed Cupboard Hood
RPUC
Concealed cupboard
hood
RANGECRAFT
RANGEHOODS
RPUC 60 - 1 221
RPUC 60-1
892
12
580
240
280
360
12
600
Power Entry
MODEL
BODY WIDTH
RPUC 60-1 600mm Plasma unit may be mounted
to 6 LED
metres
from
rangehood.
FANBOXup
WIDTH
LIGHTS
LIGHT
CENTRES NO FILTERS
580mm 1
-
Body Width
No Lights
Plasma unit
may be mounted
up to 6 metres
rangehood.
Model
Fanboxfrom
Width
RPUC
60-1
600mm
580mm
Electrical
connection
is by
a 10 Amp power
lead with a 3 pin 1plug.
FILTER SIZE
2 Electrical Connection
269mm x 250mm
is to be at the
Junction Box Inside the Rangehood.
Light Centres
-
No Filters
2
Filter Size
269mm x 250mm
02.05.2014
RPUC Specification Sheet
Cupboard Hood
RPUCConcealed Concealed
cupboard hood
RANGECRAFT
RANGEHOODS
RPUC 90 - 1 221
RPUC 90-1
892
12
240
280
880
360
12
900
Power Entry
MODEL
BODY WIDTH
RPUC 90-1 900mm Plasma unit may be mounted
up toWIDTH
6 metres
from rangehood.
FANBOX
LED LIGHTS
LIGHT CENTRES
880mm 2
770mm Body Width
No Lights
Fanboxfrom
Width
Plasma Model
unit may be mounted up to 6 metres
rangehood.
RPUC 90-1
900mm
880mm
2
Electrical connection is by a 10 Amp power lead with a 3 pin plug.
Light Centres
770mm
NO FILTERS FILTER SIZE
to be at the
2 Electrical Connection
340mm xis260mm
Junction Box Inside the Rangehood.
No Filters
2
Filter Size
340mm X 260mm
02.05.2014
RPWP Specification Sheet
Over induction
RPWP
RANGECRAFT
RANGEHOODS
RPWP 60 - 1 Over induction
221
RPWP 60-1
982
12
565
290
330
450
12
600
Power Entry
MODEL
BODY WIDTH
RPWP 60-1 600mm Plasma unit may be mounted
up to 6 metres from rangehood.
FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE
Electrical Connection is to be at the
565mm 2
300mm 2
272mm x 272mm
Junction Box Inside the Rangehood.
Body Width
No Lights
Model
Fanbox Width
PlasmaRPWP
unit may
up to 6 metres
from rangehood.2
60-1be mounted
600mm
565mm
Must be installed 750mm above induction hotplate.
Electrical connection is by a 10 Amp power lead with a 3 pin plug.
Light Centres
300mm
No Filters
2
Filter Size
272mm x 272mm
02.05.2014
RANGECRAFT
RANGEHOODS
RPWP 100
-1
RPWP Specification Sheet
Over induction
induction
Over
RPWP
221
RPWP 100-1
982
12
290
330
980
450
12.0
1000
Power Entry
Plasma unit may be mounted
up to 6 metres from rangehood.
MODEL
BODY WIDTH
Electrical Connection is to be at the
Junction Box Inside the Rangehood.
FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE
Body Width
Model
Fanbox Width
RPWP 100-1
1000mm
980mm 880mm 2 RPWP 1000mm
100-1
No Lights
Light Centres
480mm 480mm
2
2
No Filters
2
Filter Size
479mm
xX
260mm
479mm
260mm
02.05.2014
Plasma unit may be mounted up to 6 metres from rangehood.
Must be installed 750mm above induction hotplate.
Electrical connection is by a 10 Amp power lead with a 3 pin plug.
RANGECRAFT
RANGEHOODS
RPEP 60 - 1 RPEP Specification Sheet
induction
RPEP
OverOver
induction
221
RPEP 60-1
1102
565
12
290
330
570
Power Entry
600
MODEL
BODY WIDTH
RPEP 60-1 600mm Plasma unit may be mounted
up to 6 metres from rangehood.
FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE
Electrical Connection is to be at the
565mm 2
300mm 2
272mm x 272mm
Junction Box Inside the Rangehood.
Body Width
No Lights
Model
Fanbox Width
Plasma RPEP
unit may
up to 6 metres
from rangehood.2
60-1be mounted
600mm
565mm
Can be installed 600mm above induction hotplate.
Electrical connection is by a 10 Amp power lead with a 3 pin plug.
Light Centres
300mm
No Filters
2
Filter Size
272mm x 272mm
17.04.2014
RPEP Specification Sheet
Overinduction
induction
RPEP
Over
RANGECRAFT
RPEP 100 - 1 RANGEHOODS
221
RPEP 100-1
1102
12
290
980
330
570
12
1000
Power Entry
Plasma unit may be mounted
up to 6 metres from rangehood.
MODEL
BODY WIDTH
Electrical Connection is to be at the
FANBOX WIDTH LED LIGHTS LIGHT CENTRES NOJunction
FILTERS
SIZE
Box FILTER
Inside the
Rangehood.
RPEP 100-1
1000mm Body Width
980mmFanbox
2
Model
Width
RPEP 100-1
1000mm
880mm
Centres 2 No Filters
No Lights480mm
Light
480mm
2
2
Plasma unit may be mounted up to 6 metres from rangehood.
Can be installed 600mm above induction hotplate.
Electrical connection is by a 10 Amp power lead with a 3 pin plug.
479mmFilter
x 260mm
Size
479mm X 260mm
02.05.2014
PTY LTD
DISTRIBUTED IN AUSTRALIA BY CONDARI PTY LTD
Tel: 1300 360 563
HEAD OFFICE
+61 3 9482 7088
[email protected]
Website: www.condari.com.au
VIC
Tel:
Email:
Fax:+61
3 9482 7011
YOUR DISTRIBUTORS
NSW/ACT Phone: 02 9316 4599 Fax:
QLD Phone: 07 3423 3503 Fax:
SA/NT Phone: 1300 360 563 Fax:
TAS Phone: 1300 360 563 Fax:
WA Phone: 08 9242 5387 Fax:
02
07
03
03
08
9316
3282
9482
9482
9201
9299
9122
7011
7011
0887
Email:
Email:
Email:
Email:
Email:
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
New Zealand
Kitchen Appliance Specialist Ltd
320 Manchester Street
Christchurch, New Zealand
Tel: +64 3379 0360 Fax: +64 3365 5623
Kouzina Appliances
155 The Strand
Parnell, Auckland, New Zealand
Tel: +64 9 377 7822 Fax: +64 9 377 7824
Email: [email protected]
Singapore
Eldric Marketing Pte Ltd
176 Orchard Rd
#05-03 Centrepoint
Singapore 238843
Tel: +65 6369 1188
Fax:
+65 6733 8133
5 Pereira Rd
#02-01 Asiawide Industrial Building
Singapore 368025
Tel: +65 6743 8388
Fax: +65 6743 0202
CONDARI Rangehoods made in Ringwood 3134
QASAIR Reserves the right to change specification without notice. ® is a registered trademark.
www.qasair.com.au
www.condari.com.au
Printed in Melbourne Australia 06/14