marine kettle® grills

The World’s Leading Manufacturer
of Boat Grills and Accessories
In 1976, my twin brother and I created Magma Products. We were two California
sailors with a commitment to producing the highest quality boating products at
the most affordable prices possible. We take pride in having accomplished our
goal. The overwhelming acceptance of our products stems not only from our
innovative design and quality, but also from our number one priority at
Magma... CUSTOMER SERVICE AND SATISFACTION. We never forget the reason we
are in business, “to service our customer’s needs both on and off the water”.
We welcome your comments and are always looking for new and better ideas
that will enhance your boating experience.
If you have any questions or need help, simply call our toll free number
1-800-86-MAGMA. Remember that Magma is the “American Original”. So always
look for the name “MAGMA”..... It’s your assurance of high quality and 100%
satisfaction. You have our personal guarantee.
Jim and Jerry Mashburn
C
O
N
T
E
N
T
S
Featured Products...................................................................................3
Gourmet Series Grills............................................................................4-5
Gourmet Series Mounts and Accessories...............................................6-7
Marine Kettle Grills ............................................................................8-11
Marine Kettle Grill Mounting Hardware.................................................12
Accessories ......................................................................................13-16
Complete Tables....................................................................................17
“Single-Mount” (SM) Tables .....................................................................18
“Single-Mount” (SM) Mounting Hardware ...............................................19
“Dual-Mount” (DM) Tables ......................................................................20
“Dual-Mount” (DM) Mounting Hardware.................................................21
Umbrellas .............................................................................................22
Boat Stabilizers and Outriggers.............................................................23
The Versatile Magma Grill .....................................................................24
Member of the
National Marine Manufacturers Association
Hearth, Patio & Barbecue Association
2
FEATURED PRODUCTS
™
The Next
Generation of
Marine Kettle
Gas Grills
“Marine Kettle 2” Combination Stove & Gas Grill
See page 8.
NEW!
GOURMET
SERIES
GRILL’S
“Monterey” Gas Grill
See page 4.
“Newport” Gas Grill
See page 5.
“Catalina” Gas Grill
See page 5.
NEW !
THUMB
RELEASE
TRIGGER
HANDLES
9 Piece Nestable Cookware Sets
See page 16.
GOURMET SERIES GRILLS
Grills designed, built, and tested by boaters for boaters.
Patent & Patents Pending
Shown with T10-580 “Dual” Horizontal
Round Rail Mount and A10-902 Serving Shelf
• Full size inner safety shell. Funnels
grease into front-access grease tray
reducing flare-up and heat discoloration.
• Reliable piezo crystal ignition.
For instant start up.
• 100% 18-9 mirror polished
stainless steel. For lasting beauty and
superior corrosion resistance.
• Convenient snap-out dual radiant
plate. Allows quick, easy clean-up and
perfect even heat distribution.
• 12” x 24” cooking grill.
With tightly spaced grid struts, perfect
for grilling food of all sizes.
• Large upper grill. For slow grilling
or for warming food such as vegetables
or bread.
• Easy to read, all stainless steel,
hermetically sealed thermometer.
With 750-degree safety glass.
• Oversized, perfectly balanced,
lockable lid. Won’t slam shut and
secures all inner components for
transport.
• Full-length handle. Gives access
from either side and makes mounting
and transport easy.
• Swiveling valve regulator.
Allows quick gas bottle exchange.
Fuel canister, mount
and serving shelf
not included
• Magma offers the largest selection
of mounting options and
accessories. To customize your grill
to your boat. See pages 6 & 7.
“Monterey” Gas Grill
A10-1225
Grilling Area 420 sq. in. (2710 sq. cm)
Primary 12” x 24” (30 cm x 61 cm)
Secondary 5-1/2” x 24” (14 cm x 61 cm)
Large enough to provide a banquet for even the hungriest crew,
the Monterey offers features usually only found in the largest back
yard grills, yet is designed specifically for use on your boat. The
Monterey mounts easily and disassembles quickly for cleaning.
The fuel efficient primary grill comes to high, even temperatures
very quickly for searing steaks and roasts. The secondary grill is
perfect for slow grilling of fish, vegetables or warming breads.
The Monterey certainly “cooks as good as it looks.” Uses standard,
disposable 1-lb. propane canisters or adapts to on-board LPG
(propane) or CNG (natural gas) systems. We recommend the
“Heavy Duty” Mounting hardware on this model.
Requires optional mounting hardware for complete installation (see pages 6 & 7).
All replacement parts are in stock and readily available. • Outside of North America,
contact Magma for model numbers and compatible fuel applications.
4
Shown with T10-580 “Dual” Horizontal
Round Rail Mount and A10-902 Serving Shelf
“Catalina” Gas Grill
A10-1218 Grilling Area 315 sq. in. (2032 sq. cm)
Primary 12” x 18” (30 cm x 46 cm)
Secondary 5-1/2” x 18” (14 cm x 46 cm)
• Full size inner safety shell. Funnels grease into front-access
grease tray reducing flare-up and heat discoloration.
• Reliable piezo crystal ignition. For instant start up.
• 100% 18-9 mirror polished stainless steel.
For lasting beauty and superior corrosion resistance.
• Convenient snap-out dual radiant plate. Allows
quick, easy clean-up and perfect even heat distribution.
• 12” x 18” cooking grill. With tightly spaced grid struts,
perfect for grilling food of all sizes.
• Large upper grill. For slow grilling or for warming
food such as vegetables and bread.
• Easy to read, all stainless steel, hermetically
sealed thermometer. With 750-degree safety glass.
• Oversized, perfectly balanced, lockable lid. Won’t
slam shut and secures all inner components for transport.
Patent &
Patents Pending
Fuel canister, mount
and serving shelf
not included
• Full length handle. Gives access from either side and
makes mounting and transport easy.
• Swiveling valve regulator. Allows quick gas bottle exchange.
• Magma offers the largest selection of mounting options and
accessories. To customize your grill to your boat. See pages 6 & 7.
Perfect for entertaining or feeding a large crew. The Catalina is incredibly versatile and is
truly a pleasure to use. Its beauty and engineering is unsurpassed giving you professional
results every time. It grills quickly, evenly and disassembles easily for cleaning. Its super
fuel efficient design uses standard, disposable 1-lb. propane canisters or adapts to onboard LPG (propane) or CNG (natural gas) systems. We recommend the “Heavy Duty”
Mounting hardware for this model.
Shown with T10-350 “Levelock” Mount
and A10-902 Serving Shelf
“Newport” Gas Grill
A10 - 918 Grilling area 162 sq. in. (1045 sq. cm)
9” x 18” (23 x 46 cm)
• Full size inner safety shell. Funnels grease into frontaccess grease tray reducing flare-up and heat discoloration.
• Reliable piezo crystal ignition. For instant start up.
• 100% 18-9 mirror polished stainless steel.
For lasting beauty and superior corrosion resistance.
• Convenient snap-out dual radiant plate. Allows
quick, easy clean-up and perfect even heat distribution.
• 9” x 18” cooking grill. With tightly spaced grid struts,
perfect for grilling food of all sizes.
• Oversized, perfectly balanced, lockable lid. Won’t
slam shut and secures all inner components for transport.
Patent &
Patents Pending
Fuel canister, mount
and serving shelf
not included
• Full length handle. Gives access from either side and
makes mounting and transport easy.
• Swiveling valve regulator. Allows quick gas
bottle exchange.
• Magma offers the largest selection of mounting options and
accessories. To customize your grill to your boat. See pages 6 & 7.
Just right for grilling up to 8 large hamburgers. The Newport is a finely crafted piece
of hardware. Its beauty, performance and safety features will certainly exceed the
expectations of the most discriminating boater. It grills quickly, evenly and disassembles
easily for cleaning. Uses standard, disposable 1-lb. propane canisters or adapts to onboard LPG (propane) or CNG (natural gas) systems.
5
GOURMET SERIES GRILL MOUNTING HARDWARE
➤ STANDARD DUTY MOUNTS are designed for use while anchored or moored. Although strong and versatile they should be stowed while underway.
➤ HEAVY DUTY MOUNTS are designed to allow grilling underway.
All fasteners for attaching either mount to Gourmet Series Grills are included with grill.
“Single” Horizontal Round Rail Mount
➤ STANDARD DUTY
T10-380
T10-385
T10-390
Fits Standard Round Rails 1” (25.5 mm)
Fits Oversize Round Rails 1-1/4” (32 mm)
Fits Large Round Rails 1-1/2” (38 mm)
Extremely strong and features 2-way adjustment for perfect horizontal
leveling. Made of 18-8 stainless steel and 356 anodized aluminum, it quickly
detaches without tools for compact storage leaving no hardware on the rail.
Note: 7/8” or 1-1/8” plastic rail size adapters in 300 series rail mounts are for Magma table application only and are not
recommended for grill application. For application of these sizes, use “Dual” Horizontal Round Rail Mounts shown below.
“Dual“ Horizontal Round Rail Mount
➤ HEAVY DUTY
T10-580 Fits Standard Round Rails 7/8” or 1” (22 mm or 25.5 mm)
T10-585 Fits Oversize Round Rails 1-1/8” or 1-1/4” (28.5 mm or 32 mm)
T10-590 Fits Large Round Rails 1-1/2” (38 mm)
Incredibly strong and rigid, these rail mounts will not slip on the rail. They have a unique
pivoting design which allows them to attach to curved rails or across the corner of a
stern rail. Made of 18-8 stainless steel and 356 anodized aluminum, they instantly
detach without tools for compact storage leaving no hardware on the rail.
“LEVELOCK”® All-Angle Fish-Rod Holder Mount
➤ HEAVY DUTY
T10-350
One of our best and strongest mounts. Nothing on the market
compares to it. Made of heat treated stainless steel and hard anodized
aluminum, the quick release cam-action lever allows instant leveling
without tools. Fits most cross pin type rod holders. Folds flat for compact
storage. While this mount is one of our strongest mounts, its design has
no lock mechanism and should be stowed with grill while underway.
“Single” Locking Flush Deck Socket Mount
➤ STANDARD DUTY
T10-326
This attractive mirror polished 18-8 stainless steel flush deck
socket set features a push button lock pin and includes a flange
gasket with integral flip-up water seal cap. Some fasteners
required for installation.
“Dual” Locking Flush
Deck Socket Mount
➤ HEAVY DUTY
T10-526
Same as above, but with two
mirror polished socket sets to allow use
while underway. Some fasteners required for installation.
“Single” Locking Surface Deck Socket Mount
➤ STANDARD DUTY
T10-321
This attractive mirror polished 18-8 stainless steel deck socket set features a
push button locking pin and a water drainage hole in the side of the socket.
Some fasteners required for installation.
“Dual” Locking Surface Deck
Socket Mount
➤ HEAVY DUTY
T10-521
Same as above, but with two
mirror polished socket and
post sets to allow use while
underway. Some fasteners
required for installation.
6
Side, Bulkhead or Square/Flat Rail Mount
➤ STANDARD DUTY
T10-340
This all 18-8 stainless steel mount attaches to flat surfaces
such as bulkheads, hulls, transoms or cabin sides. Also
mounts to square or flat rails. Fits HORIZONTAL RAILS up
to 2-1/4” (57 mm) high by any depth or VERTICAL RAILS
up to 1-5/8” (41 mm) wide by any depth. Some fasteners required for installation.
“Dual” Side, Bulkhead
or Square/Flat
Rail Mount
➤ HEAVY DUTY
T10-540
This all 18-8 stainless steel mount attaches to flat surfaces such as bulkheads, hulls, transoms or cabin
sides. Also mounts to square or flat rails. Fits HORIZONTAL RAILS up to 2-1/4” (57 mm) high by any depth
or VERTICAL RAILS up to 1-5/8” (41 mm) wide by any depth. Some fasteners required for installation.
“Dual” Extended Horizontal Round Rail Mount
➤ HEAVY DUTY
This round rail, quick-disconnect, mounting bracket is
made entirely of 18-8 stainless steel and hard and 356
anodized aluminum. Allows mounting of Gourmet Series
Fits Standard Round Rails 1” (25.5 mm)
Grills out over the water. The quick-disconnect system
T10-685
Fits Oversize Round Rails 1-1/4” (32 mm) allows quick disassembly leaving no hardware on the rail.
T10-680
T10-690
Fits Large Round Rails 1-1/2” (38 mm)
Note: Not recommended for use with the A10-1225 “Monterey” Gourmet Series
Gas Grill. Note: Not recommended for use with plastic rail size adapters.
Vertical “Levelock” Round Rail Mount
➤ STANDARD DUTY
This mount combines the versatility of our popular “LeveLock”®
all-angle quick release, cam-action mount for instantaneous
T10-780
Fits Standard Round Rails 1” (25.5 mm) leveling, with our sturdy vertical, out-over-the-water Round Rail
Mount. This mount is made entirely of 18-9 stainless steel and
T10-785
356 anodized aluminum to outlast even the most severe
Fits Oversize Round Rails 1-1/4” (32 mm) marine environments. Quickly disassembles for stowage
T10-790
without tools, leaving no hardware on the rail.
Fits Large Round Rails 1-1/2” (38 mm)
Note: Not recommended for use with the A10-1225 “Monterey” Gourmet Series
Gas Grill.
T10-360
Note: Not recommended for use with plastic rail size adapters.
T10-365
Socket Type Fish-Rod Holder Mounts ➤ STANDARD DUTY
& Fish-On are registered trademarks of Tempress, Inc.
T10-360 Fits Tempress Fish-On and Roberts Rod Holder Sockets Tempress
Roberts is a registered Trademark of Attwood, Inc.
Scotty is a registered Trademark of Scotty, Inc.
T10-365 Fits Scotty /Striker Grip Rod Holder Sockets
®
®
These mounts are designed to fit the most popular plastic rod holder sockets. They quickly disconnect without
tools for compact storage. Designed to stow with grill while underway. Rod holder sockets not included.
On Shore Legs
T10-655
Use your Gourmet Series Grill on-shore, on the
dock, at home or camping with these all 18-8
stainless steel legs. They are extremely strong
and rugged making them a great camping
accessory. Not recommended for use on boats.
7
➤ For Gourmet Series Grill
Accessories see pages 13-16.
MARINE KETTLE®
GRILLS
All new, totally redesigned!
The next generation of Marine Kettle® Gas Grills
™
Patent & Patents Pending
• Newly designed, swiveling, windproof
turbo venturi & control valve design. Virtually
eliminates blow-outs. Places the fuel & valve where it
is convenient to you. Allows safe & easy fuel changes.
• Hinged lid. Balanced lid will not slam shut.
• Reliable Piezo Igniter. Dependable push
button lighting.
• Burner & hi tech radiant plate & dome heat
distribution design. Less flare up, even heat
distribution & longer grill life. Allows use as a grill,
stove or oven. Perfect even heat as a grill or direct
open flame cooking as a stove.
•“Stay Cool” handle with air cooled supports.
Cast 18-9 Stainless.
• Cast 18-9 stainless L-bracket mount clamp.
Indexed for positive non-slip level mounting.
• Fully double lined stainless steel inner safety
shell. Cooler for safety. Guards against discoloration.
Adds years of life to the grill.
• Magma’s patented design utilizes convection
cooking. Gives the hottest temperature with the
least amount of fuel. Fast & efficient.
• Uses standard, disposable 1-lb. propane
canisters or adapts to on-board LPG (propane)
or CNG (natural gas) systems.
Fuel canister &
mounting bracket
not included
• Magma offers the largest selection of
mounting options and accessories.
To customize your grill to your boat. See page 12.
Completely
Assembled!
“Marine Kettle 2”® Combination Stove & Gas Grill
A10 - 207 Original Size Diameter 15” (368 mm)
Diameter 17” (432 mm)
A10 - 217 Party Size
Available in the “Original Size” 15-inch, or 17-inch “Party Size”, the Marine Kettle 2 incorporates new
features that are both useful and user friendly -- including being virtually windproof. Its dependability in
a stiff breeze is due to a virtual blow-out proof turbo venturi and valve system. A front mounted piezo
igniter is now included, as well as a new patented burner and heat distribution system that reduces
flares-ups. The burner also adds years of life to the grill by directing more heat to the cooking surface.
These grills have full, double lined inner safety shells to keep the outside of the grill cooler. A
mirror polished, 18-9 marine-grade stainless exterior finish provides superior corrosion resistance.
Topping off the Kettle 2 is a polished, stainless “Stay Cool” handle. The hinged lid is balanced so it
won’t slam shut as the boat rolls. Magma’s patented plate and dome system make it the only boat grill
that is truly a grill, stove or oven -- a great advantage to boats without a galley, or if the first mate just
wants to cook outdoors.
The grills feature a new cast stainless indexing bracket and clamp to provide easier, more positive
level mounting. It uses standard, disposable, 1-lb. propane canisters or will easily adapt to the boat's
existing onboard LPG (propane) or CNG (natural gas) system. The newly designed valve system
adjusts left, right, inboard or outboard for easy heat control access and fuel-bottle change.
Requires grill mounting hardware for complete installation (see page 12). • Radiant burner
plate & dome system, indexing bracket and clamp, and turbo venturi tube are available to upgrade
earlier Magma Gas grill’s. • All replacement parts are in stock and readily available. • Outside of
North America, contact Magma for model numbers and compatible fuel canisters.
8
Instantly
disassembles
without tools
for easy
cleaning.
N
Hinged Lid
Balanced lid will
not slam shut.
E
Reliable Piezo Igniter
Dependable push
button lighting.
W
F
E
Windproof Turbo Venturi
& Control Valve Design
Virtually eliminates
blow-outs.
A
T
U
“Stay Cool” Handle with
Air Cooled Supports
Cast 18-9 Stainless.
R
E
S
Cast 18-9 Stainless
Burner & Heat
L-Bracket Mount Clamp
Distribution Design
Indexed for positive
Less flare up, even heat
no-slip level mounting.
distribution & longer grill life.
MAGMA’S PATENTED
DESIGN.
Creates fast, efficient
convection cooking.
ENTIRE GRILL IS
100% MIRROR
POLISHED 18-9
STAINLESS STEEL
CONSTRUCTION.
"STAY COOL" 18-9 CAST
STAINLESS HANDLE.
With air cooled supports.
BALANCED
HINGED LID.
Will not slam shut
as boat rolls.
FULLY DOUBLE LINED
STAINLESS STEEL
INNER SAFETY SHELL.
Stays cooler for safety.
Guards against
discoloration. Adds
years of life to the grill.
HEAVIER GAUGE
STAINLESS STEEL AND
BRASS BURNER DESIGN.
COMBINATION
GREASE CATCH
PAN/WIND BAFFLE
“Easy to Clean”.
Keeps wind gusts out,
keeps grease in.
RELIABLE PIEZO IGNITER.
For easy, dependable push
button lighting.
BURNER & HEAT
DISTRIBUTION DESIGN.
Uses patented hi-tech
radiant plate & dome
system. Less flare up, even
heat distribution & longer
grill life. Allows use as a
grill, stove or oven.
REDESIGNED CONTROL
VALVE/REGULATOR.
Allows precise
temperature adjustment.
WINDPROOF SWIVELING
TURBO VENTURI TUBE.
Virtually eliminates blow-outs.
U.S. and Foreign Patents
U.S. Patent Numbers
•4,788,962 •5,330,154
•5,413,090 •292,163
Other U.S. and
Foreign Patents Pending
The only true combination
Grill, Stove or Oven!
Radiant Plate & Dome System
9
CAST 18-9 STAINLESS
L-BRACKET MOUNT CLAMP.
Indexed for easier, positive,
non-slip level mounting.
MARINE KETTLE® GRILLS Our Original Design
The World’s most popular Marine Grill’s
“Marine Kettle”®
Combination Stove & Gas Grill
A10 - 007 Original Size
“Don’t be
fooled by
cheap
imitations”
Dia. 14 1/2” (368 mm)
A10 - 017 Party Size
Dia. 17” (432 mm)
• Burner & hi tech radiant plate & dome
heat distribution design. Less flare up, even
heat distribution & longer grill life. Allows use as
a grill, stove or oven. Perfect even heat as a grill,
direct open flame cooking as a stove. See below.
• Attached grill and lid. Lid acts as windshield
in gusty wind conditions.
• Magma’s patented design utilizes convection
cooking. Gives the hottest temperature with the
least amount of fuel. Fast & efficient.
• Fully Double Lined Stainless Steel Inner
Safety Shell. Cooler for safety. Guards against
discoloration. Adds years of life to the grill.
A10-017
“Party Size” Grill
shown with
A10-080 Round
Rail Mount
• Newly designed, swiveling, windproof
turbo venturi & control valve design.
Virtually elimates blow- outs. Places the fuel &
valve where it is convenient to you. Allows safe
and easy fuel changes.
• Uses standard, disposable 1-lb. propane
canisters or adapts to on-board LPG
(propane) or CNG (natural gas) systems.
Fuel canister
& mounting
bracket not
included
• Magma offers the largest selection of
mounting options and accessories.
To customize your grill to your boat. See page 12.
Instantly
disassembles
without tools
for easy
cleaning.
Only Magma’s patented “Marine Kettle®” design will give the safety, durability and performance required of a marine grill. Our patented
stainless steel radiant burner plate and dome system allows you to place your standard pots and pans directly over the flame. Your
MAGMA® grill is now your Cockpit Cooking Center. You can boil, fry, heat, brew, grill, sauté, simmer, stew, and bake at your leisure. Great
for boats without a galley. Made entirely of 18-9 stainless steel, our burner plate is designed to be very efficient. This means your MAGMA
grill will use less fuel, heat up faster, and have you cooking in no time at all. It seals in the natural flavors and aromas that discerning
grilling aficionados expect. The unique lid design secures anywhere around the grill allowing “hands free” operation while creating a
useful windshield for gusty wind conditions. Cleanup is easy. A twist of the burner instantly disassembles the grill for simple cleaning.
Magma’s Combination Stove & Grill! The Magma Advantage
1. Entire grill is made of superior quality 18-9 stainless steel and mirror
polished for the ultimate in corrosion resistance.
2. Magma’s patented design gives the hottest temperature with the least amount
of fuel of any grill and distributes the heat evenly across the cooking surface.
1
7
2
3. Combination “easy-to-clean” grease catch pan/wind baffle keeps the wind
gusts out while keeping the flames and grease in.
4. Newly designed windproof swiveling turbo venturi tube. Virtually eliminates
blow-outs. Easy fuel change while grilling.
5. Newly designed valve/regulator allows precise temperature adjustment.
8
10
9
3
5
4
6
6. Attaches anywhere on your boat with the largest and most diverse
selection of mounting options. See page 12.
7. Attached grill and lid (lid acts as a windshield in gusty wind conditions).
8. Re-designed, heavy gauge, stainless steel and brass burner, for
superior performance and long lasting dependability
9. Fully double lined stainless steel bowl guards against
discoloration and adds years of life to the grill.
U.S. and Foreign Patents
U.S. Patent Numbers
•4,788,962 •5,330,154
•5,413,090 •292,163
Other U.S. and
Foreign Patents Pending
10. New patented 18-9 stainless steel radiant heating plate
system allows use as a stove, oven or grill. Emits no
toxic gases into food as do aluminum heating
plates. Allows you to place your standard
pots and pans directly over the flame!
10
“Marine Kettle”® Gas Grill
A10 - 005 Dia. 14 1/2” (368 mm)
A great
grill at a
great price!
• Stainless steel radiant screen and ceramic
briquets. Provide perfect even heat distribution.
• Attached grill and lid. Lid acts as windshield in
gusty wind conditions.
• Magma’s patented design utilizes convection
cooking. Gives the hottest temperature with the
least amount of fuel. Fast & efficient.
Shown with A10-080
Round Rail Mount
• Newly designed, swiveling, windproof
turbo venturi & control valve design. Virtually
eliminates blow-outs. Places the fuel & valve where it is
convenient to you. Allows safe and easy fuel changes.
• Uses standard, disposable 1-lb. propane
canisters or adapts to on-board LPG (propane)
or CNG (natural gas) systems.
• Magma offers the largest selection of
mounting options and accessories.
To customize your grill to your boat. See page 12.
Fuel canister &
mounting bracket
not included
For those
who enjoy the
experience of
traditional
charcoal
grilling!
A10-014 “Party Size” Grill
shown with A10-080
Round Rail Mount
Made of 100% 18-9 mirror polished stainless steel,
this barbeque was designed for economy without
sacrificing function. It has the same features of our
A10-007 Combination Stove and Grill but without
the double lined bowl, and radiant burner plate
and dome system. Instead, it uses our time-tested,
highly efficient radiant screen and briquet heating
system to achieve hot and even temperatures
using a minimum of fuel. Our special ceramic
briquets are designed to reduce flare-ups.
Instantly
disassembles
without tools
for easy
cleaning.
“Marine Kettle”® Charcoal Grill
A10 - 004 Original Size
Dia. 14 1/2” (368 mm)
A10 - 014 Party Size
Dia. 17” (432 mm)
• Attached grill and lid. Lid acts as windshield
in gusty wind conditions.
• Attached, rotating adjustable cooking grill.
• Complete temperature control.
• Lower charcoal grate and sealed ash compartment.
• Magma offers the largest selection of
mounting options and accessories.
To customize your grill to your boat. See page 12.
Mounting bracket
not included
Our time-tested original charcoal “Marine Kettle”® is also
available in “Party Size” with 33% more cooking area
than our original. It is meticulously crafted of 100%
18-9 mirror polished stainless steel for maximum
corrosion resistance. Starts easily in windy conditions by
using the lid as a windshield. You obtain perfect results
through use of the rotating, adjustable height cooking
grill and the variable temperature draft control door.
Our “Marine Kettle”® design allows oven type baking to
enhance the grill flavor while retaining the natural juices
in the food. It will cook more food faster on less grill
area than any other charcoal grill. Safety and efficiency
are obtained by closing the temperature draft control
door and extinguishing the coals for future use.
Requires grill mounting hardware for complete installation (see page 12).
All replacement parts are in stock and readily available • For Gas Grills, outside of North America,
contact Magma for model numbers and compatible fuel canisters.
11
Instantly
disassembles
without tools
for easy
cleaning.
MARINE KETTLE GRILL MOUNTING HARDWARE
The most options available anywhere!
U.S. & Foreign Patents, U.S. Patent No. 6,045,109
Round Rail Mount
A10-080 Fits Standard Round Rails
7/8” or 1”(22 mm or 25.5 mm)
A10-085 Fits Oversize Round Rails
1-1/8” or 1-1/4”(28.5 mm or 32 mm)
A10-090 Fits Large Round Rails
1-1/2” (38 mm)
This round rail, quick-disconnect, all angle
mounting bracket is made entirely of 18-8
stainless steel and 356 anodized aluminum to
endure the most severe marine environment. Fits
any angle railing & detaches quickly for storage
without tools leaving no hardware on the rail.
Side (Bulkhead) or
Square/Flat Rail Mount
A10-240
This all 18-8 stainless steel mount attaches to
any vertical flat surface such as bulkheads,
hulls, transoms or cabin sides. Also mounts
to square or flat rails. Fits HORIZONTAL RAILS
up to 2-1/4” (57 mm) high by any depth or
VERTICAL RAILS up to 1- 5/8” (41 mm) wide
by any depth. Rod portion of mount quickly
disconnects for easy storage. Some fasteners
required for installation.
POW’R GRIP™ Fish Rod
Holder Mount
A10-175
Fits all standard fish rod holders
Made of 18-8 stainless steel and durable
all weather plastic, this vastly improved
versatile mount fits most cylindrical type
rod holders. It allows grills to mount in
any direction from the rod holder. Its
unique quick disconnect system allows
instant installation or storage after use
without tools. Rod holder not included.
Socket Type Rod
Holder Mount
A10-160
Fits Tempress Fish-On® and Roberts
Rod Holder Sockets
Deck Socket Mount
A10-120
This mount is made of 18-8 stainless
steel and triple chrome plated brass.
A stainless detent pin lets the grill
rotate and lock in four different
positions. Rod portion of mount
quickly disconnects for compact
storage. Some fasteners required
for installation.
Socket Type Rod
Holder Mount
A10-165
Fits Scotty®/Striker Grip
Rod Holder Sockets
18-8 stainless steel
18-8 stainless steel & durable all-weather plastic
These rod holder mounts fit the popular
Tempress Fish-on® and many other socket
type rod holder mounts. They allow the
“Marine Kettle”® to be locked in 12 different
positions and quickly disconnects for easy
storage without tools. Rod holder sockets
& Fish-On are registered Trademarks of Tempress, Inc.
not included. Tempress
Roberts is a registered Trademark of Attwood, Inc.
These rod holder mounts fit the popular
Scotty® and many other socket type rod
holder mounts. They allow the “Marine
Kettle”® to be locked in 12 different
positions and quickly disconnects for
easy storage without tools. Rod holder
Scotty is a registered
sockets not included.
Trademark of Scotty, Inc.
Mounting Extension
A10-140
On Shore Legs
A10-650
This all 18-8 stainless steel extension adds
8” (20 cm) to all Magma “A10” series
“Marine Kettle”® grill mounting brackets.
Not necessary in most applications.
Now larger and more stable (for all
gas or charcoal “Marine Kettle”® grill’s)
Cook onshore with this 18-8 stainless steel
and brass grill stand. It easily collapses for
flat compact storage without tools. Not
for use on boats.
12
Grill Mount Kit for
“Dual-Mount” Tables
T10-515
This remarkably functional
mount is used in conjunction with
Magma T10-500 series “Dual-Mount” tables.
(See “Dual-Mount” Table section, pages 20-21).
ACCESSORIES
Magma®
Marine Kettle®
Grill Covers
Made of water and fade
resistant Sunbrella® boat
cover material to resist
damage from sunlight
and mildew.
® Sunbrella and Glen Raven
are registered Trademarks of
Glen Raven Mills, Inc.
Available in boating’s most
popular Sunbrella® colors
Forest
Green
FITS ALL ORIGINAL SIZE ➤ A10 -191FG
FITS ALL PARTY SIZE ➤
A10 -492FG
“Catalina”
Pacific
Blue
Burgundy
Jet
Black
Royal
Blue
A10 -191PB
A10 -492PB
A10 -191BU
A10 -492BU
A10 -191JB
A10 -492JB
A10 -191RB
A10 -492RB
Captain’s
Navy
A10 -191CN
A10 -492CN
“Newport”, “Catalina” and
”Monterey” Gourmet Series
Grill Covers
Water and fade resistant Sunbrella®
boat cover material resists damage
from sunlight and mildew.
® Sunbrella and Glen Raven
are registered Trademarks of
Glen Raven Mills, Inc.
• 5 year warranty covers the fabric becoming unserviceable because of loss of color
or strength from normal exposure conditions, including sunlight, mildew, rot and
atmospheric chemicals. • 1 year warranty on all other components.
Available in boating’s most
popular Sunbrella® colors
Forest
Green
FITS NEWPORT ➤ A10 -990FG
FITS CATALINA ➤ A10 -1290FG
FITS MONTEREY ➤ A10 -1291FG
Pacific
Blue
Burgundy
Jet
Black
A10 -990PB
A10 -1290PB
A10 -1291PB
A10 -990BU
A10 -1290BU
A10 -1291BU
A10 -990JB
A10 -1290JB
A10 -1291JB
Royal
Blue
A10 -990RB
A10 -1290RB
A10 -1291RB
Captain’s
Navy
A10 -990CNX
A10 -1290CN
A10 -1291CN
“Newport”, “Catalina” and “Monterey”
Gourmet Series Serving Shelf with
Removable Cutting Board
A10-902 17-1/4” x 7-1/2” (44 cm x 19 cm)
18-8 Stainless Steel detachable Serving Shelf with U.V. Stabilized High-Density,
FDA approved Polyethylene cutting board. Attaches and detaches instantly for
quick and easy clean-up or storage. Stores inside of grill when not in use.
13
ACCESSORIES
“Marine Cuisine” ®
Barbeque Cookbook
A10-270
From cornish game hens to great hamburgers, this book contains 130
pages of easy to prepare barbeque delights, useful recommendations,
techniques, hints and accessory ideas for a better grilling experience.
Recipes are designed to use a minimum of ingredients and are exclusively
prepared for the “Marine Kettle”® Grill. The 5th Edition.
LPG (Propane) 10’ (3 m)
Hose Conversion Kit
A10-225
Used in conjunction with the A10-220 control valve, this kit allows you
to connect your Magma gas grill to your on-board, pre-regulated, low
pressure LPG (propane) system. Includes all necessary brass fittings,
safety shutoff valve and 10 feet (3 m) of pre-assembled, leak tested hose.
A10-220 Valve (shown below) required for complete installation.
Control Valve (for on-board gas systems)
A10-220 Type 3- Low Output LPG (Propane) For All Marine Kettles & Newport Gourmet Series Grills
A10-223 Type 3- Medium Output LPG (Propane) For Catalina Gourmet Series Grills
A10-224 Type 3- High Output LPG (Propane) For Monterey Gourmet Series Grills
A10-230 Type 4- Low Output CNG (Natural Gas) For All Marine Kettles & Newport Gourmet Series Grills
A10-231 Type 4- Medium Output CNG (Natural Gas) For Catalina Gourmet Series Grills
A10-232 Type 4- High Output CNG (Natural Gas) For Monterey Gourmet Series Grills
For pre-regulated, low pressure, on-board LPG (propane) and CNG
(natural gas) systems, this stainless steel and brass control valve is
designed to connect to the low pressure side of the regulator.
Hose and fittings not included.
Propane/Butane Canister
Storage Locker/Tote Bag
A10-210
Safe, convenient and essential for boats without approved propane or
butane gas storage lockers. Stows 3 disposable butane or propane canisters
safely out-over-the-water. Made of water and fade resistant heavy duty
nautical blue polyester boat cover material. Has heavy nylon adjustable
straps with snap connectors for attaching to a horizontal rail or lifeline.
“Easy Light”™ Charcoal Starter
A10-150
Made of 18-8 stainless steel, it lights charcoal in windy conditions while
adding years of life to your Magma charcoal grill by protecting the threaded
center rod from continuous overheating. Measures the correct amount of
charcoal and comes with a removable cooling hanger.
14
ACCESSORIES
Grill Utensils
A10-280 • Spatula
A10-281 • Tongs
A10-282 • Grill Brush
A10-283 • Fork
A10-284 • Complete 4 Piece Set
100% All 18-8 Stainless Steel Wok
A10-290 16-1/2” diameter (419 mm)
Wide mirror polished 304 grade stainless steel blades and
substantial ergonomic handles for the ultimate in cooking
control. The grill brush has 100% brass bristles. The
professional style fork has forged stainless steel prongs.
The ancient culinary art of wok cooking is now available in 100%
18-8 stainless steel. This high quality, beautiful wok is perfectly
proportioned to fit the Magma Marine Kettles®, the Del Mar™
Residential Grill or your in-home or on-board appliances.
Fish & Veggie Grill Tray
A10-296 Stainless Steel with Teflon® Select Non-Stick Finish
13-3/4” diameter (349 mm)
A10-295 Stainless Steel Finish
13-3/4” diameter (349 mm)
For grilling flaky fish, vegetables, and small food items, or use it inside our Wok as a steamer tray.
Made of marine grade 304 Stainless Steel, this professional grilling accessory keeps those small delicacies from falling through the
grill. The convenient, removable, rubber coated handle makes the grill tray easy to use and to stow. The grill tray may also be
used with our Stainless Steel Wok as a steamer tray. The non-stick version is coated with Teflon® Select for unsurpassed durability.
Du Pont and Teflon Select are trademarks of E.I. du Pont de Nemours and or its affiliates
15
ACCESSORIES
Designed Specifically for Boats and RV’s
P
R O F E S S I O N A L
S
E R I E S
9 Piece Stainless Steel Gourmet “Nesting” Cookware A10-360
The quality and value you've come to expect from all Magma products now in an 18-10 stainless steel cookware set that nests for storage
in less than 1/2 cubic foot of cabinet space. The set includes three saucepans (1-1/2 qt., 2 qt., and 3 qt.), a lid that fits all three saucepans,
a 5 qt. Stock Pot, a 9-1/2 inch diameter Saute Pan (also serves as a lid for the Stock Pot), 2 removable handles, and a convenient “Bungee”
storage cord. All have triple clad bottoms (stainless steel, aluminum, stainless steel) and perfectly flat bottoms for even heat distribution on
gas, electric or ceramic cooktops. All the cookware is oven safe and dishwasher friendly. Yacht quality cookware at a value price.
Du Pont and Teflon Select are trademarks of E.I. du Pont de Nemours and or its affiliates
9 Piece Stainless Steel “Nesting”
Cookware Coated with Teflon® Select
Non-Stick Coatings A10-365
Same set as above but coated with Teflon® Select non-stick
coatings for the ease of cooking and cleanup preferred by many.
Patents Pending
Thumb Release
Trigger Handles are
the safest & strongest
handles made. Easily
attach or detach with
just one hand.
Stores in less than
1/2 cubic foot.
COMPLETE TABLES
No additional hardware required
The table that
installs in seconds
and folds
completely flat!
Comes completely
assembled; nothing
else to buy.
Econo Mate™
Bait & Filet Table
T10-310
20” x 16”
(51cm x 41 cm)
T10-311
12” x 16”
(31 cm x 41 cm)
T10-310
The versatile Econo-Mate bait and filet table is made of FDA approved, UV stabilized, high-density polyethylene
for mildew free, crack free, and maintenance free use. It will not absorb fish odors like wood tables. It attaches
and detaches instantly with a stainless steel push/pull pin. The stainless steel hinged mount folds completely
flat for compact storage. All edges and corners are rounded for your safety. Filet knife and pliers not included.
Comes complete. No additional
mounting hardware required.
Bait/Filet Mate™
Table with
Levelock® Mount
T10-312
12-3/4” x 20”
(32.5 cm x 51 cm)
T10-313
12-1/2” x 31”
(32 cm x 79 cm)
T10-313
T10-312
These attractive tables are nearly indestructible and
excellent for fileting fish or serving food and beverages.
They are made from FDA approved, high density,
polyethylene which is more practical and sanitary than
wood cutting tables. They will not crack, mildew or absorb fish odors. They are virtually maintenance
free. They feature 2 filet knife holders and a handy receptacle for your fishing pliers. The slot at the
back of the tables permits instant water drainage from the work surface.
The Levelock all-angle Fish Rod Holder Mount is made of heat treated stainless steel and hard
anodized aluminum. It is the most versatile mount on the market. The quick release cam-action
design allows convenient all-angle adjustment. The 1-1/2” (38 mm) 18-8 stainless steel tube fits into
most cross-pin type rod holders in 8 different rotational positions. Folds flat for convenient storage.
Rod holder, filet knives and pliers not included.
17
“SINGLE -MOUNT” TABLES (SM)
Requires Mounting Hardware (see next page)
T10-302
These attractive
tables are nearly
indestructible
and excellent for
fileting fish or
serving food
and beverages!
T10-303
Bait/Filet Mate™ Cutting/Serving Tables
T10-302 12-3/4” x 20” (32.5 cm x 51 cm)
T10-303 12-1/2” x 31” (32 cm x 79 cm)
“Bait/Filet Mate”™ cutting and serving tables may be used for food or cocktail service, for bait preparation, or
for cleaning the catch of the day. They feature 2 filet knife holders and a handy receptacle for your fishing
pliers. The open slot at the back of the tables permits water drainage from the work surface when you clean
or filet your favorite seafood. The “Bait/Filet Mate”™ is virtually indestructible and more practical and sanitary than
wooden cutting boards. They will not absorb fish odor, crack or mildew and are practicality maintenance free. They are made
of the finest commercial cutting board material available, FDA approved and UV stabilized high-density polyethylene. All
edges and corners are rounded for your safety. Your “Bait/Filet Mate”™ will keep your deck free from messy scales and residue.
Our T10-302 “Bait/Filet Mate”™ is especially useful on small open craft where storage is limited. Our larger T10-303 table is
big enough for any bait work and excellent for fileting the big ones that didn’t get away. “Single-Mount” (SM) mounting
hardware is required for complete installation (see page 19). Filet knives and pliers not included.
Third Mate™ Cockpit Table
T10-306 12” x 24” (30.5 cm x 61 cm)
The “Third Mate”™ cockpit table is truly a third hand when preparing
and grilling food or serving beverages in the cockpit. This versatile table
is made of the same material and has all the great features of the
“Bait/Filet Mate”™ with some additional features. The windscreen, made
of Pacific Blue Sunbrella® boat cover material, is supported by four
stainless steel uprights and provides protection against gusty wind and
choppy sea conditions. It also features a full length front guard rail and
a stainless steel towel and utensil rack. The windscreen detaches quickly
for compact storage. “Single-Mount” (SM) mounting hardware is required
for complete installation (see page 19).
® Sunbrella and Glen Raven are registered Trademarks of Glen Raven Mills, Inc.
18
“SINGLE -MOUNT” MOUNTING HARDWARE (SM)
Fasteners for attaching these mounts to the Gourmet Series Grills are included with the grill.
®
Horizontal
Round Rail Mount
T10-380 Fits Standard
“LEVELOCK”®
All-Angle
Fish-Rod
Holder Mount
T10-350
Round Rails 7/8” or 1”
(22 mm or 25.5 mm)
T10-385
Fits Oversize
Round Rails 1-1/8” or 1-1/4”
(28.5 mm or 32 mm)
T10-390
Fits Large
Round Rails 1-1/2” (38 mm)
This incredibly strong rail mount will not slip on the rail. It attaches any
Magma (SM) table or Gourmet Series Grill to horizontal round rails and
features two way angle adjustment for perfect horizontal leveling. Made
of 18-8 Stainless steel and 356 anodized aluminum, it quickly detaches
without tools for compact storage leaving no hardware on the rail.
Great for mounting other items such as solar panels, fish finders, or
just about anything else onto horizontal or vertical round rails.
Nothing on the market compares to our newest, most versatile fish rod
holder mount. It’s made of heat treated stainless steel and hard anodized
aluminum. The quick release cam-action design allows convenient all
angle adjustment. The 1-1/2” (38 mm) 18-8 stainless steel tube fits into
most “cross pin” type rod holders in 8 different rotational positions. Folds
flat for compact storage. Rod holder not included.
“Single” Locking Flush
Deck Socket Mount
T10-326
“Single” Locking Surface
Deck Socket Mount
T10-321
This attractive mirror polished 18-8
stainless steel flush deck socket set
features a push button lock pin and
includes a flange gasket with integral
flip-up water seal cap. Some fasteners
required for installation.
This attractive mirror polished 18-8
stainless steel deck socket set features a
push button locking pin and a water
drainage hole in the side of the socket.
Some fasteners required for installation.
Side (Bulkhead) or
Square/Flat Rail Mount
T10-340
Deck Socket
Mount
T10-320
This all 18-8 stainless steel mount attaches
to any vertical flat surface such as
bulkheads, hulls, transoms or cabin sides.
Also mounts to square or flat rails. Fits
HORIZONTAL RAILS up to 2-1/4” (57 mm)
high by any depth or VERTICAL RAILS up
to 1-5/8” (41 mm) wide by any depth.
Some fasteners required for installation.
This mount is made of
18-8 stainless steel and
triple chrome plated
brass. A stainless detent
pin lets the table rotate
and lock in four different
positions. Some fasteners
required for installation.
Socket Type
Rod Holder Mount
T10-360
Fits Tempress Fish-On® &
Roberts Rod Holder Sockets
18-8 Stainless Steel
Tempress & Fish-On are registered Trademarks of
Tempress, Inc.
Roberts is a registered Trademark of Attwood, Inc.
These rod holder mounts fit the popular Tempress Fish-on® and many other socket type rod
holder mounts. They allow the Single Mount Tables to be locked in 12 different positions and
quickly disconnected for easy storage without tools. Rod holder sockets not included.
Socket Type Rod
Holder Mount
T10-365
Fits Scotty®/Striker Grip
Rod Holder Sockets
18-8 Stainless Steel and
durable all-weather plastic
Scotty is a registered Trademark of Scotty, Inc.
These rod holder mounts fit the popular Scotty® and many other socket type rod holder
mounts. They allow the Single Mount Tables to be locked in 12 different positions and
quickly disconnected for easy storage without tools. Rod holder sockets not included.
19
Vertical “Levelock”
Round Rail Mount
T10-780
Fits Standard Round Rails 1” (25.5 mm)
T10-785
Fits Oversize Round Rails 1-1/4” (32 mm)
T10-790
Fits Large Round Rails 1-1/2” (38 mm)
This mount combines the versatility of our popular
“LeveLock”® all-angle quick release, cam-action mount
for instantaneous leveling, with our sturdy vertical,
out-over-the-water Round Rail Mount. This mount is
made entirely of 18-9 stainless steel and 356 anodized
aluminum to outlast even the most severe marine
environments. Quickly disassembles for stowage
without tools, leaving no hardware on the rail.
“DUAL - MOUNT ” TABLES (DM)
Requires Mounting Hardware (see next page)
“First Mate™ Dual Mount”
Cutting and Food Serving Tables
T10-503
T10-504
T10-505
12-1/2” x 31” (32 cm x 79 cm)
12-1/2” x 41” (32 cm x 104 cm)
12-1/2” x 51” (32 cm x 130 cm)
Magma’s “First Mate”™ dual-mounted cutting and food serving tables are a much larger version of our “Single-Mount” (SM)
tables and a perfect compliment to your Magma grill. The heavy-duty “Dual-Mount” design gives you the strength of a work
bench with the convenience of Magma’s quick mount system for compact storage. They feature large water drainage slots,
two filet knife holders, a handy receptacle for your fishing pliers, and four inch high side and back guard rails with all edges
and corners rounded for your safety. They are virtually indestructible, will not absorb fish odors, crack, mildew and are
practicality maintenance free. Made with FDA approved and UV stabilized high-density polyethylene, they are perfect for
preparing and serving food and beverages. “Dual-Mount” (DM) mounting hardware is required for complete installation
(see page 21). Filet knives and pliers not included.
These attractive tables are nearly
indestructible and excellent for fileting
fish or serving food and beverages!
20
“DUAL - MOUNT” MOUNTING HARDWARE (DM)
Fasteners for attaching these mounts to the Gourmet Series Grills are included with the grill.
Horizontal Round
Rail Mount
T10-580
Fits Standard Round Rails
7/8” or 1” (22 mm or 25.5 mm)
T10-585
Fits Oversize Round Rails
1”-1/8” or 1-1/4” (28.5 mm or 32 mm)
T10-590
Fits Large Round Rails
1”-1/2” (38 mm)
These incredibly strong rail mounts have a unique pivoting design which allows them to mount on straight or curved rail or across the
corner of a stern rail. Made of 18-8 stainless steel and 356 anodized aluminum, they instantly detach without tools for compact storage.
“Dual” Locking Flush Deck Socket Mount
“Dual” Locking Surface Deck Socket Mount
T10-526
T10-521
Two attractive mirror polished 18-8 stainless steel flush deck socket
sets, features a push button lock pin and includes a flange gasket
with integral flip-up water seal cap. These sockets mount flush for
an uncluttered deck. Some fasteners required for installation.
Two attractive mirror polished 18-8 stainless steel deck socket and
post sets, features a push button locking pin and a water drainage
hole in the side of the socket. Some fasteners required for
installation.
“Dual” Side, Bulkhead or Square/Flat Rail Mount
T10-540
This all 18-8 stainless steel mount attaches to flat surfaces such as bulkheads, hulls, transoms or cabin sides. Also mounts to square or flat
rails. Fits HORIZONTAL RAILS up to 2-1/4” (57 mm) high by any depth or VERTICAL RAILS up to 1-5/8” (41 mm) wide by any depth. Some
fasteners required for installation.
Marine Kettle
Grill Mount
Kit for
“Dual-Mount”
Table
Table Height
Extension Set
T10-511
6” (15 cm)
T10-512
T10-515
12” (30.5 cm)
Bring your Dual Mount Table to a convenient height with
one of these 18-8 stainless steel socket mount extension
sets. Use with “Dual” Surface Deck Socket or “Dual” Flush
Deck Socket Mounts.
Used with Deck Socket Mounts T10-521 and T10-526 or earlier version
Deck Socket Mounts T10-520 and T10-525. This 100% stainless steel
mount allows you to add a Magma Gas or Charcoal Kettle Style Grill to
any “Dual-Mount” table. It raises the table 6 inches (15 cm) and allows
the grill to rotate inboard for easy access and outboard for safety. Spring
lock pins secure the grill in 5 convenient positions around the table.
(The locking feature of the T10-521 and T10-526 Deck Socket Mounts is unavailable
when using the T10-511 or T10-512 Extension Sets. Cannot be used with T10-515).
(The locking feature of the T10-521 and T10-526 Deck Socket Mounts is unavailable when using
the T10-515 Mount Kit).
21
UMBRELLAS
Beat the heat and protect yourself from
the sun’s harmful affects. Designed to
withstand the tough marine environment.
Boat•Umbrella features:
• Special patented windproof design.
• Quick release all-angle round rail
mount made of durable stainless steel
and anodized aluminum, quickly
adjusts to any position.
• 2 piece fiberglass shaft with chrome
brass joint.
• Colorful, fade resistant acrylic coated
nylon fabric.
The Original “BOAT•UMBRELLA”™
B10-401
B10-402
Multi-Color
Blue
More than an ordinary umbrella, the
was designed for
the harsh marine environment. Made with non-corroding materials, its new
windproof design will not allow the canopy to turn inside out or lose it’s shape
in gusty wind conditions. Our special patented annular baffle is double stitched
to the interior and kept rigid by a stabilizing cord. It uses the force of the wind by
trapping air inside the dome, thus pushing down on the umbrella with the same
force the wind pushes upward. The canopy measures 6 feet (1.8 m) across the
bow. Fade resistant acrylic coated fabric is stretched over specially designed
polymer bow ribs that will not rust or stain the fabric. The 5 foot (1.5 m) long
shaft is made of flexible double cored fiberglass and has a chrome brass joint for
compact storage in its own nylon carrying case. The 7/8” to 1” (22 mm to 25.5
mm) round rail mount adjusts to fit any angle on your vertical or horizontal
railing or stanchion. The extra heavy load design of the clamp will not allow the
umbrella to slip on the rail. Made of 18-8 stainless steel and 356 anodized
aluminum, it quickly detaches without tools leaving no hardware on the rail.
Multi-Color
Fits Standard Size Round Rail
7/8” to 1” (22 mm to 25.5 mm)
Blue
Complete with storage case
22
All New Windproof Design!
Special patented annular baffle uses the
force of the wind by trapping air inside
the dome. This pushes down on the
umbrella with the same force the wind
pushes upward.
“ROCK ‘N ROLL” ™ BOAT STABILIZER AND OUTRIGGER
The Quietest, Most Effective Anti-Roll Device–Guaranteed
The “Rock’n’Roll”™
Boat Stabilizer
Our new hull mounting boot made of
356 Hard-anodized aluminum insures
silent, secure operation.
R10-702
Our patented hydrodynamic design
breakthrough relies on shape rather
than heavy weight, making it more
efficient and easier to handle. Our
proven hinged-wing stabilizer
operates silently without noisy flapper
valves or vanes to keep you awake at
night. So remarkably effective, it
actually reduces motion sickness and
accidents caused by uncomfortable
wind and sea conditions.
Solid stainless steel spring
lock-pins allow compact
storage inside stabilizer case.
The “Rock’n’Roll”™
Outrigger System
R10-707
97” (246.5 cm)
A necessary companion for boats without the means to
extend the stabilizer away from the hull. Our patented
outrigger system incorporates a permanently installed hull
boot made of 356 hard-anodized aluminum and coated
with white linear polyurethane for lasting beauty. The
outrigger uses a stainless steel swivel plate covered with a
soft rubber pad, which slips into the hull boot to ensure
secure and silent operation. The 3 piece telescoping
outrigger extends the stabilizer well out from the hull to
dramatically increase its effectiveness. Release of the solid
stainless steel locking-pins enables the outrigger to be
collapsed for easy stowage in the stabilizer
storage/carrying case. Comes complete
with outboard dacron support lines.
36” (91.5 cm)
Now, your whole family
can enjoy boating more
comfortably while anchored,
drifting, fishing or moored!
Flexible dacron bridle
with vinyl chafe guards
makes stowing easy,
reduces fouling and far
outlasts stiff wire bridles.
Beautifully crafted
from 100% 18-8 mirror
polished stainless steel.
Design allows for retrieval
line permitting effortless
recovery of the stabilizer
(line not included).
Stabilizer Features:
• Fully open 36” x 21” (91.5 cm x 53 cm)
756 square inches resistance (4878 sq. cm)
• Folds flat for storage 10 -1/2” x 36” x 3”
(27 cm x 91.5 cm x 7.5 cm)
• Includes dacron bridle assembly
• Weighs only 18 lbs. (8 kg)
• Complete with attractive rugged storage case
Outrigger Features:
•
•
•
•
•
Telescopes from 42” to 97” (107 cm to 246.5 cm)
Uses 3/8” (9.5 mm) solid stainless steel spring lock-pins
Includes dacron outboard rigging lines
Weighs only 7 lbs. (3.2 kg)
Quickly stows inside the 36” (91.5 cm) Stabilizer storage case
What’s the secret of “Rock’n’Roll” ™ ?
T
GROEAR
Storage/carrying case
included with stabilizer
TM
BO
AT
ST A
B ILI Z E R FR O M M AG
MA
TM
NOTE: “Rock’n’Roll” Boat Stabilizers
“DO NOT INCLUDE” depth control or retrieval lines.
Simply put...“Rock’n’Roll”™ sinks like a rock and holds like an anchor.
F
G
FISHIN
United States Patent No. 5,263,434
Our hinged-wing
design is the only
stabilizer that
folds flat on the
“DOWN PHASE”
allowing it to
dive without the
resistance or
buoyancy found
in other designs
using frames,
cones or bags.
This continuous action
holds your boat
steady like no other
stabilizer...letting you
relax in comfort and
truly enjoy boating!
23
At the very
beginning of the “UPPHASE” the curved
shape of the wings
instantly forces the
stabilizer to it’s full
open position
producing maximum
drag resistance
throughout the
entire phase.
United States Patent No. 5,095,839
Not just for use on boats
Catalina Gas Grill
with Table Top Legs
Marine Kettle 2
Gas Grill with
Round Rail Mount
Marine Kettle 2
Gas Grill with
Side Mount
Marine Kettle 2
Gas Grill with
Square Rail Mount
and LPG Hose
Conversion Kit
U.S. Patent Nos.
•5,413,090
•6,253,760
•D438,750
Del Mar ® Grill
Marine Kettle
Charcoal Grill with
On Shore Stand
Newport Gas Grill
with Table Top
Legs and
optional
Serving Shelf
MAGMA PRODUCTS, INC. • 3940 Pixie Avenue • Lakewood, CA 90712 • U.S.A.
(800) 86-MAGMA • (562) 627-0500 • Fax: (562) 627-0550
www.MagmaProducts.com • e-mail: [email protected]
64-011 0205
®