Pure Water Systems - EDM Performance Accessories
Transcription
Pure Water Systems - EDM Performance Accessories
ABA’s regenerated resin saves you money. Mixed Bed and Dual Bed Systems. ABA’s unique regeneration process restores up to 95% of the deionizing resin’s hydroxide form, and regenerates up to 99% of the hydrogen form. So you get a regenerated resin which equals and, depending on the original brand and mix, can even exceed the performance of virgin resin. When you ship PURE WATER exhausted resins to us — bagged bulk or in cells — we carefully separate the components and regenerate the resins to meet your needs. That’s any type, any volume. Pure Water Systems RAW WATER Raw Water Al+++ F– Ca++ Cl– Mg++ F3++ SO4= Products and systems for your process water, from the people you trust for pure water solutions. Na+ K+ NO– CATION + RESIN H OH- H+ ANION RESIN OH– Precision multistage regeneration lets us provide you a strongacid cation resin to split the water’s salts. Pure Water The multistage procThe mixed-bed deionizing resin attracts essing also enables salts and trace elements, and binds these regenerating the to the resin. Multistage regeneration cuts strong-base anion the knots and restores the resin’s capacity resin, Type 1 and to demineralize. Type 2, to separate and remove the water’s chlorides and sulfates, completing the demineralization process. With ABA you get the consistently high-quality resin needed to produce a pure water for your operations, for much less than the cost of new resin. H+ OH– H+ OH– H+ H+ OH– H2O H2O Whatever the application, and whatever D.I. resin type and volume you need, let’s talk. Send us an e-mail: [email protected] Or, call us right now. Tel: 800-257-1271 Waste Disposal and Regulatory Protection. ABA is licensed by regulatory agencies to treat and dispose of the industrial wastes generated during electrical discharge machining. So when we regenerate your resin, we also remove and dispose of those byproducts. You don’t have to worry about where to dump the waste, when to dump the waste, and how to dump the waste. We handle all that for you. Send your exhausted resin to us, and we return to you resin which is scrubbed of contaminants, restored, and ready for use. It’s that simple and that easy. ABA Water Systems, Inc. 226 West Broadway Plainview, MN 55964 Fax: 507-534-4178 Tel: 507-534-3870 Toll Free: 1-800-257-1271 Visit us at: www.abawatersystems.com Saving money is easy as a phone call. ABA’s service includes regenerating virtually any brand and grade of resin, regardless of tank size and system configuration. We also supply new or replacement cells/tanks as needed, for both carbon and resin. Ordering is as easy as a phone call. We ship to anywhere in North America. 47” 35” 35” Quick change, more uptime. Products and equipment for EDM and more. Cells can be equipped with whatever connections you want. Quick-connect fittings make it easy to exchange the cells. The operator simply turns off the water, swaps the tanks, and turns the water on again. A typical example is shown. The entire process takes less than five minutes. Long known for its pure water expertise for EDM operations, ABA also provides resin, carbon, and systems for such diverse applications as producing pharmaceuticals, bottling soft drinks, boiler makeup systems, waterjet cutting, machine tool coolants, closed loop chiller water, and more. 47” 35” Head 18” 7” 6” 8” 10” 10” 14” Shipping Cap Purity Light O-Ring Ports 718 635 835 Dual Bed and Mixed Bed Systems Capacity in Grains Model Dual Mixed 718 6,000 3,000 635 10,000 5,000 835 18,000 9,000 1035 24,000 12,000 1047 38,000 19,000 1447 70,000 35,000 1035 Flow Range GPM .5 1.0 1.5 2.0 3.0 10.0 1047 Pressure Limit PSI 100 100 100 100 100 100 1447 Shipping Weight Lbs. Per Tank 24 36 50 69 100 200 Carbon Filters Model 718 635 835 1035 1047 1447 Capacity Cubic Feet .30 .50 .80 1.00 1.80 3.00 Flow Range GPM .5 1.0 1.5 2.0 3.0 10.0 Pressure Limit PSI 100 100 100 100 100 100 Shipping Weight Lbs. 20 30 40 50 70 140 Tank Adapter D.I. Cells and Tanks. Heavy duty, co-polymer polypropylene cells and bottles. Lightweight, yet strong enough for industrial use. All tanks are available in the OEMs’ preferred colors and popular sizes. Tank 1. Remove the U-pin. Save the shipping cap for use when returning the cell for its next regeneration. 2. Inspect the ports to make sure they are clean, and then assemble the head to the tank adapter. The head and adapter are coded for inlet and outlet. 3. Re-insert the U-pin. If a purity light is used, simply fit it to the 1/2” FPT port and tighten it down. If no light is needed, the operator plugs the port with a 1/2” pipe plug. That’s it — your cell is ready. Process Water for EDM Carbide Cutting. Designed for high-speed cutting operations, this system holds the critical conductivity/resistivity set points needed to eliminate pitting and enhance surface finish. Features sub-micron filtration and ABA’s long resin-life, ion exchange. Reverse Osmosis for Process Water. Multiprocess system produces pure makeup water for a fraction of the cost of deionizing alone. Features 5-micron sediment prefilter, carbon prefilter, RO deionizing, flow meters, TDS meter, tanks. Repressurization system and chiller are available. © 2007 ABA Water Systems Inc.