Intake - Custom Chrome

Transcription

Intake - Custom Chrome
Intake
Proudly Distributed by
Thunder Jet Kits
Patented third fuel circuit has a built-in air correction system that
permanently solves the problem of poor mid-range performance or a
too-lean condition on the top end. It operates over a wide range of
altitude and atmospheric conditions.
Thunder Jet for S&S, Bendix and Keihin Carburetors
May be installed on all S&S Super ‘B and E models as well as Bendix/
Zenith and Keihin (except CV) carburetors.
14765
Red anodized��������������������������������������������������������������������������������$58.99
14766
Blue anodized��������������������������������������������������������������������������������$58.99
14767
Black anodized������������������������������������������������������������������������������$58.99
614767 Polished������������������������������������������������������������������������������������������$72.99
Thunder Pro for S&S Carburetors
Delivers more fuel than the Thunder Jet. Designed for big inch
engines. May be installed on all S&S Super ‘D and G’ carburetors.
614772 Black anodized������������������������������������������������������������������������������$71.99
614773 Blue anodized��������������������������������������������������������������������������������$71.99
614774 Red anodized��������������������������������������������������������������������������������$71.99
614775 Polished������������������������������������������������������������������������������������������$81.99
Vulcan Engineering S&S 1” &
3/8” Carb Spacers
Billet Aluminum, O-ringed Groved Works
with 5 & 6 Gallon Fat Bobs
668158 1” Super B&E ������������������������������$32.99
668159 1” Super G������������������������������������$32.99
668160 1” Super D������������������������������������$38.99
668161 3/8”Super B&E ����������������������������$32.99
629307
629308
629309
Custom Chrome Enrichener Knobs for S&S Carbs
Tired of that boring choke knob on your carb? Try one of these three knobs to add good looks
to good function. They fit S&S Super E, B and G Carburetors.
629307 Solid Cross, Enricher Knob for S&S ��������������������������������������������������������������������������������������������$19.99
629308 Cross, Enricher Knob for S&S ������������������������������������������������������������������������������������������������������$19.99
629309 Star, Enricher Knob for S&S����������������������������������������������������������������������������������������������������������$19.99
Manifold Adapter Kit
Billet Flange Manifold Adapter
This adapter allows the use of a Mikuni
HSR42 or late model Keihin CV carburetor
on a Shovel-head, Panhead, Sportster, or
early Evolution model with 2-bolt flange
manifold. Each unit is CNC-machined from
billet aluminum.
040324 Sold each��������������������������������������$31.99
These adapters allow almost any possible
combination of early (O-ring) or late
(rubberband) manifolds and heads to be
converted to the superior sealing 78-85 style
rubberband intake seals and clamps. Kit
includes 4 standard adapters and 2 stroker
adapters. Standard adapters also work great
on damaged O-ring style heads or cylinders.
Stroker adapters convert most O-ring
manifolds to stroker length.
040351 Adapter kit ������������������������������������ $5.49
Note: Manifold not included.
2
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Adjustable Enrichener for S&S
Carburetors
This adjustable enrichener replaces the stock
fixed enrichener on all S&S Super “B” and
“D” carburetors. Allows for easier starting
and warm up.
040448 Sold each����������������������������������������$9.99
Fuel Line Support
Routes the fuel line between the cylinders.
Chrome duplicate of the support on most
models 66-89. Installs on lower intake
manifold flange bolt. Card of 10. Sold each.
15895
Replaces OEM 45092-66��������������$9.99
Flange-Style Adaptors
Adaptors for Mikuni and Lectron carbs.
Constructed of reinforced, temperatureresistant synthetic rubber, these versatile
adaptors permit the mounting of 36-44mm
spigot-style carbs to all stock flange-style
manifolds.
17372
Fits mounting 36-38mm spigot-style
carbs to flange-style manifolds
with a 2 3/4" center-to-center stud
spacing������������������������������������������$24.00
17373
Fits mounting 40-44mm spigot-style
carbs (except Mikuni smoothbore)
to flange-style manifolds with a 3
5/16" center-to-center stud spacing
Spigot-Style Adaptors
Straight-thru and stepped spigot-style manifold adaptors. Double internal lip ensures
an air tight seal while a thick 1/4"-wall
and full 3/8"-thick center section provide a
strong, stable mounting.
17390
Stepped manifold adapter for use
with 36-38mm spigot-style carbs
����������������������������������������������������������$9.99
17391
Straight-thru manifold adapter for
use with 40-44mm spigot-style carbs
����������������������������������������������������������$9.99
��������������������������������������������������������$24.00
Choke Wires
Up to 3"-longer than stock to fit almost all
models with push/pull choke controls.
15900
21"-long for dash-mounted choke
assemblies with 3/16" shank and
10-32 thread. Knob and nut������$8.99
14900
Kabel for non CV carbs��������������$15.99
14901
Motor mount/under tank style for
most Sportster and Buell models
with CV carbs (repl. OEM 29238-92)
17388
Rubber carburetor coupler,
Replacement adapter for Mikuni
‘HS40’ smoothbore carburetor kits
with 2 15/16" center-to-center stud
spacing������������������������������������������$24.00
��������������������������������������������������������$12.99
w w w.cu sto m c h ro m e.co m
3
641616
Manifold Spacer for FlangeMount Carbs
641617
7/16"-thick insulating spacer with gaskets for
all carbs having 23/4" center-to-center stud
mounting. Original Equipment on Bendix
and Keihin carbs from 78-89 to prevent
engine heat from being transferred to the
carburetor. Replaces OEMs 29250-78A and
27077-78.
17375
Sold each. ��������������������������������������$4.99
Ripple CV Carb Top by Biltwell
Plastic is for toys, not motorcycles! Replace
that fugly stock carb top in about five minutes with just a screw driver. These sweet
units are available in cast aluminum, gloss
black powdercoat or in a fully polished, cast
stainless steel. They are machined after casting to ensure accurate sealing, but the edges
are left raw for that unique cast look. Fits
90-06 Big Twins and 88-06 Sportsters.
641617 Ripple CV carb top, polished����$59.99
641616 Ripple CV carb top, black����������$29.99
Fuel Inlet Fittings for Keihin
Carburetors
Stock type replacement fuel inlet fitting.
Presses into the carburetor body. Sold each.
268071
Fits 4-speed Big Twins from 79-80;
Sportster models from late 76-80
and 83-87 (repl. OEM 27594-76)
������������������������������������������������������ $9.99
268072
Improved by reducing the T-bolt diameter
size and bending it to conform to the
clamp’s contour, making it easier to install.
Includes manifold seals and self-locking nuts.
Sold in pairs.
11099
Fit Shovelhead, Sportster and
Panhead models from 55-E78 $15.99
11098
Fit Shovelhead and Sportster models
from late 78-85����������������������������$15.99
Intake Manifold Seals
O-ring style for Shovelhead, Panhead and
Sportster intake manifolds from 55-E78. Pack
of 10.
12085
Replaces OEM 27060-55�������������� $3.99
Chrome Intake Clamps
268071
Stainless Steel Aircraft-Style
Intake Clamps
Rubber band style for Shovelhead and
Sportster models from 78-85. Pack of 10.
25102
Replaces OEM 27062-78������������$22.95
Chrome clamps machined into matched
halves for a tight, perfect fit combined
with superior sealing and strength. Include
sockethead hardware. Sold in pairs.
11100
Fit Shovelhead, Sportster and
Panhead models from 55-E78$18.99
11103
Fit Shovelhead and Sportster models
from late 78-85����������������������������$19.99
Intake Manifold Seals
O-ring style for Shovelhead, Panhead and
Sportster intake manifolds from 55-E78.
Pack of 10.
12085
Replaces OEM 27060-55��������������$3.99
Rubber band style for Shovelhead and
Sportster models from 78-85. Pack of 10.
25102
Replaces OEM 27062-78������������$22.95
Fits Big Twin models from 76-78 and
81-05; Sportster models from 81-82
and 88-03 (repl. OEM 27371-76)
�������������������������������������������������������$9.99
Classic 7" Round Air Cleaners
Custom Air Cleaner Braces
Chrome support braces come with all necessary hardware.
For Stock Carburetors
For Shovelhead Big Twins and Sportster
models with Bendix or Keihin carburetors.
28117
Fits Sportster models 57-85��������$7.99
28118
Fits all Shovelhead models 66-84
Cable Blocks
Attaches inner cable to the carburetor on all
models thru 70. Includes screw and cotter
key.
20068
Card of five����������������������������������$19.99
4
����������������������������������������������������������$7.99
For Teardrop Air Cleaners
Recommended when installing Teardrop air
cleaners.
19012
Fits Shovelheads from 66-84,
Replaces OEM 29206-87T������������$7.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Complete assemblies with filter and backing
plate have a perfect chrome finish to fit
Bendix/Zenith, Tillotson and Keihin carbs.
12028
Fits Bendix/Zenith, Tillotson and
Keihin (except CV) carbs thru 89
��������������������������������������������������������$40.99
19030
Fits CV carburetors on Sportster
models from 88-91 Big Twins ��$59.99
Replacement Filters
11904
Fits S&S air cleaners (except Super
‘E’ and ‘G’) and 7" teardrop air cleaners, Replacement Premium air filter
element ����������������������������������������$16.99
Note: These air cleaners will not fit with CC #17398 or OEM
29116-83 head-mounted Carburetor Support Brackets.
25560
K&N 5" Round Air Cleaners
12010
12011
19020
25560
19018
Fits 36-38mm Mikuni carb (27/16"
I.D. mounting flange)����������������$69.99
Fits 40-44mm Mikuni and 38-40mm
Lectron carbs (2 3/4" flange)����$73.99
Fits Keihin/Andrews flowmaster carb
(2 5/8" mounting flange)����������$65.99
Fits 5 1/2" diameter S&S (except
Super ‘E’ and ‘G’) and Keihin (except
CV type) carbs������������������������������$92.99
5 1/2" replacement element����$45.99
Jammer “Derby Cover” Air Cleaner Assembly
This retro styled air cleaner was used on our “Delta 88” custom build, and was an instant hit
as soon as people saw it! Featuring an early style Derby Cover for the front, this air cleaner
assembly incorporates a washable, re-usable air filter element and a backing plate that allows
installation on stock Keihin CV carbs and Delphi EFI (except 08 and later Touring models).
Optional adaptor rings are available separately for mounting to Mikuni & S&S “E” & “G” carbs.
The air cleaner assembly measures 7 1/2” wide, 7” high and 3” deep.
650800 Jammer “derby cover” air cleaner assy ��������������������������������������������������������������������������������� $139.99
25023
Replacement filter element ��������������������������������������������������������������������������������������������������������$51.99
632254
632255
Early Style Breather Snoots
5 1/2" Round Air Cleaners
High-performance round air cleaners for
Bendix/ Zenith, Keihin (except CV) and
Tillotson carbs.
12026
Plain chrome round air cleaner
��������������������������������������������������������$29.99
688079
11912
Plain black round air cleaner ��$29.99
Replacement filter����������������������$10.99
Knuckle Style Breather Snoots
for S&S Carbs by Paughco
Paughco has taken their early style breather
snoots, and designed backing plates &
mounts to fit them to S&S E & G carbs
mounted on Evo & Twin Cam (non-EFI)
engines. Reminiscent of the breather snoots
ran on Knuckleheads. Measure 4” wide at
the widest part, 2 1/2” wide at the end,
and 8 1/2” long. Chrome plated steel. No
filter element included. A real classic look
for retro rides! Made in USA by the crew at
Paughco.
632950 Knuckle Style Breather Snoot. S&S
E&G- Evo’s 84-91 ������������������������$84.99
632951 Knuckle Style Breather Snoot. S&S
E&G-Evo/TC 92-06 ����������������������$84.99
w w w.cu sto m c h ro m e.co m
A standard item on early models, these
chromed breather snoots are available in either a smooth or ribbed version. Fit Bendix,
Tillotson & Keihin (except CV) carbs. No filter
element included. A real bad-ass look on
retro rides! Made in USA by Paughco.
632254 Breather snoot-smooth ������������$51.99
632255 Breather snoot-ribbed ��������������$51.99
5
651296
651294
632966
632967
Jammer “Tear Drop” Style Air Cleaners by
Paughco, Cover only
Designed and styled after the Tear Drop Air Cleaners of the past,
these beauties are made of cast aluminum, polished, then brilliantly
chrome plated. Measure 8” wide, by 4 1/2” high & 2” deep. Available
in either Smooth, or Ribbed styles. Offered in versions to fit either
S&S E and G carbs, or CV-Keihin 98-06 and Delphi EFI 01-13. Fittings
included where required. Made in USA by the folks at Paughco.
Note: Will not fit Magneti-Marelli EFI systems.
632965
632966
632967
632968
651294
651295
651296
651297
6
Tear Drop Smooth A/Cleaner – S&S E/G carbs��������������������� $184.99
Tear Drop Smooth A/Cleaner – Keihin 88-06, Delphi EFI’s 01-13
������������������������������������������������������������������������������������������������������� $184.99
Tear Drop Ribbed A/Cleaner – S&S E/G carbs ��������������������� $184.99
Tear Drop Ribbed A/Cleaner – Keihin 88-06, Delphi EFI’s 01-13
������������������������������������������������������������������������������������������������������� $184.99
Tear Drop Smooth Slotted A/Cleaner Cover for S&S E/G carbs
������������������������������������������������������������������������������������������������������� $270.99
Tear Drop Smooth Slotted A/Cleaner Cover for Keihin 88-06,
Delphi EFI’s 01-12����������������������������������������������������������������������� $270.99
Tear Drop Ribbed Slotted A/Cleaner Cover for S&S E/G carbs
������������������������������������������������������������������������������������������������������� $270.99
Tear Drop Ribbed Slotted A/Cleaner Cover for Keihin 88-06,
Delphi EFI’s 01-12����������������������������������������������������������������������� $270.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
These fine Jammer products are found in
the 2013 Custom Chrome Catalog
General Warnings
Motorcycle riding is a dangerous activity. The only way to be sure to avoid
injury is not to ride! Even if you use the finest and best-maintained equipment,
wear a helmet and protective clothing, and take all possible precautions, it
is not possible to avoid every risk. Motorcycle accidents frequently result in
serious injury, including death. Please do not operate a motorcycle or other
motor vehicle when you are tired or under the influence of alcohol or drugs,
or when your perception is impaired for any other reason. At all times, please
wear a helmet, ride carefully and within posted speed limits, and obey all other
traffic regulations and instructions from law enforcement personnel.
Custom Chrome, sells aftermarket motorcycle parts for Harley-Davidson® and
other brands. If you do not have the necessary experience and skill, please have
a qualified mechanic install any new or replacement part on your motorcycle.
The failure to install properly and test any new or replacement component
could adversely affect your motorcycle’s operation and result in an accident,
including a fatal accident.
Federal and state laws and regulations impose restrictions on modifying the
engine, ignition, exhaust and other components of a motorcycle intended
for on-road use. In addition, these laws and regulations impose requirements
on windshields, brake components, lighting, and other equipment on your
motorcycle. Accordingly, certain parts in this catalog are for competition or
display purposes only. In general, those parts are indicated by a “Competition”
mark: a checkered flag in a yellow oval.
If you are a retail customer, you are responsible to know the laws and
regulations that govern the modification of your motorcycle. Custom Chrome is
not responsible if you modify your motorcycle or any component in violation of
law. If you have any questions regarding a particular component, please consult
your dealer or a qualified motorcycle mechanic.
The following is additional information relating to components for sale in
various sections of this catalog. This information is not exclusive – if you have
any questions regarding the installation or use of any component, please
contact your dealer, a qualified mechanic, or Custom Chrome’s customer
service department.
© COPYRIGHT 1982-2013 BY CUSTOM CHROME - A DIVISION OF DAE-IL USA, INC.
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY BE REPRODUCED,
STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY
ANY MEANS; ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING, OR
OTHERWISE WITHOUT PRIOR WRITTEN PERMISSION OF THE PUBLISHER.
Any “add-on” or “modified” emissions-related parts contained in this brochure that are subject to anti-tampering laws may or may not have been evaluated and/or
exempted by CARB. As a distributor, Custom Chrome makes no representation or warranty with respect to whether the emissions-related parts in this brochure are
legal for sale, installation or use in any state unless the part is installed in a vehicle used only for closed-course competition. Consult with the manufacturer as to any
such exemptions before purchasing any add-on or modified emissions-related parts for non-competition use in California or elsewhere.
w w w.cu sto m c h ro m e.co m
7
World’s Finest Products For Harley-Davidsons
Service
Maintenance
Customization Repair
Performance
18225 Serene Drive | Suite 150 | Morgan Hill, CA 95037 | Printed in USA
8
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.