Aalborg Akvavit - Solvang privatbane.dk

Aalborg Akvavit
Danish Schnapss
A, C and D are glued onto thin
cardboard. They cut free and the
white squares cut out.
Assemble:
Glue A to B
Glue C above the A
Glue D on top of C.
In Aalborg there must obviously be a liquor factory. I
have constructed a small factory with many recognizable features from DDSF in Aalborg.
The factory has had cars on the tracks.
Here are a few trailers from Spor1fyn's installation a
white wagon and a truck.
Play Options:
Transportation to the the factory is potatoes and from
the factory schnapps , industrial alcohol and potato
chips:).
If needed, use the bottom of page 9
A
B
C
D
A
B
C
D
Light in the building
I've covered the walls and
doors, so it is only windows,
which consists of a layer of
paper. Then I tried to put the
lights on. It works!
A
B
C
D
B
C
A
A
B
C
B
A
B
A
C
C
Glued to the
main building
The chimney cut out and
assembled as a cone.
A similar tube in carton is
formed into a cone, but
not glued together. It is
pushed up the chimney.
The roof of the small building.
I've made it in 2 mm cardboard.
Glue the roof of the building and glue
chimney.
Floor and roof. Again on a very strong cardboard. There
is a hole in the floor so I can get into the building.
B
A
C
A small piece to go across on
the roof.
I've cut contours. At the bottom they are still
fixed at a throng of cardboard.