PA3000 - CalPlus GmbH

PA3000
Four-channel, Multi-phase AC/DC Power Analyzer
Complete solution for full compliance testing to IEC 62301 standby
power requirements
High 1 MHz bandwidth supports the LED module energy certification
requirements of CQC-3146
More than 50 standard measurement functions, including harmonics,
frequency, and star-delta computation
Multiple analog and digital inputs for sensor data such as
thermocouples, speeds sensors, and torques sensors
The Tektronix PA3000 is a one to four channel power analyzer that is
optimized for testing today’s single- and multi-phase, high efficiency power
conversion products and designs. Use it to quickly visualize, analyze, and
document power efficiency, energy consumption, and electrical
performance to the latest regional and international standards, including
Level VI, EnergyStar, CEC, IEC 62301, and CQC-3146.
Key features and specifications
One to four channels support single and three phase applications
20 mW standby power measurements
1 MHz bandwidth
Harmonic analysis to 100th order
±0.04% basic voltage and current accuracy
Built-in ±15 V supplies for external transducers to support high current
applications
Applications
AC/DC power supplies
DC/AC inverters
Consumer electronics & IT equipment
Appliances
Lighting
UPS & battery chargers
Hybrid & electric vehicles
Motor drives
Measurements to 30 Arms and 600 Vrms Cat II (2000 Vpk)
USB and LAN interfaces standard (GPIB option)
Free PWRVIEW software
The essential power measurement tool for R&D and
validation
High accuracy supports testing to Level VI efficiency standards for
external AC/DC power supplies
Dedicated energy consumption testing in integration mode for
standards like Energy star and CEC
www.tek.com 1
Datasheet
Visualize signals and analyze data
The PA3000’s full color display provides intuitive readout of measured values, waveforms, harmonic bar charts, energy integration plots, and more. Setup is
easy using the menu-driven interface and soft keys.
The PA3000’s free PWRVIEW software automates instrument setup and enables data collection, analysis, and report generation with just a few clicks using
wizard-driven interfaces.
Measurement channels
One to four channels, factory configurable
Voltage
(4 mm safety banana jack inputs)
Measurements to 600 Vrms (2000 Vpk), DC to 1 MHz.
Ranges (Peak) : 5 V, 10 V, 20 V, 50 V, 100 V, 200 V, 500 V, 1000 V, 2000 V
Current (internal 30 A shunt)
(4 mm safety banana jack inputs)
Measurements to 30 Arms (200 Apk), DC to 1 MHz
Ranges (Peak): 500 mA, 1 A, 2 A, 5 A, 10 A, 20 A, 50 A, 100 A, 200 A
Current (internal 1 A shunt)
(4 mm safety banana jack inputs)
Measurements to 1 Arms (5 Apk), DC to 1 MHz.
Ranges (Peak): 12.5 mA, 25 mA, 50 mA, 125 mA, 250 mA, 500 mA, 1.25 A, 2.5 A, 5 A
Current (external transducers)
(2 mm safety banana jack inputs)
Measurements to 20 Vpk, DC to 1 MHz
Ranges (Peak): 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 2 V, 5 V, 10 V, 20 V
Power supply for transducers
±15 V ±5%, 250 mA (per channel) (standard)
Auxiliary I/O
4 Analog inputs (±10 V, 1 kS/s sampling)
2 counter inputs (±10 V) (1 MHz)
4 digital outputs (+5 V TTL)
Each measurement channel includes a set of 4 mm stackable banana safety test leads and 2 mm stackable banana safety test leads.
2 www.tek.com
PA3000 Power Analyzer
Available measurements
Vrms – Volts RMS
Acf – Amps crest factor
VAHf – Fundamental VA hours
Arms – Amps RMS
Vthd – Volts total harmonic distortion
VArHf – Fundamental VAr hours
Watt – Watts
Vdf – Volts distortion factor
Vf – Fundamental volts rms
VA – Volts-Amps
Vtif – Volts telephone influence factor
Af – Fundamental amps rms
VAr – Volts-Amps reactive power
Athd – Amps total harmonic distortion
Wf – Fundamental power
Freq – Frequency
Adf – Amps distortion factor
VAf – Fundamental apparent power
PF – Power factor
Atif – Amps telephone influence factor
VArf – Fundamental reactive power
Vpk+ – Volts peak (positive)
Z – Impedance
PFf – Fundamental power factor
Vpk- – Volts peak (negative)
R – Resistance
Vrng – Voltage range
Apk+ – Amps peak (positive)
X – Reactance
Arng – Amps range
Apk- – Amps peak (negative)
Hr - Hour
Vll – Voltage Line-to-Line
Vdc – DC Volts
WHr – Watt hours
Vln – Voltage Line-to-Neutral
Adc – DC Amps
VAHr – VA hours
An -- Neutral current ( or phase 3 current for 3p3w )
Vrmn – Volts rectified mean
VArHr – VAr hours
V Harmonics – Voltage harmonics
Armn – Amps rectified mean
AHr – Amp hours
A Harmonics – Amps harmonics
W Harmonics – Watts harmonics
Vcmn – Volts corrected rectified mean
Wav – Average watts
Acmn – Amps corrected rectified mean
PFav – Average power factor
Vcf – Volts crest factor
CVAr – Correction VAr
Measurement accuracy
23 °C ± 5 °C, < 80 percent relative humidity
Parameter
Basic accuracy
Voltage
±0.04% reading
Current (internal shunts)
±0.04% reading
Current (external shunt)
±0.1% reading
Watts
±0.08% reading
VA
±0.08% reading
Frequency
±0.05% reading
Harmonics
±0.08% reading
Phase
±0.025% reading
Analog Inputs
±0.2% reading
www.tek.com 3
Datasheet
General specifications
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Communications
LAN
IEEE 802.3, 10BaseT
USB device
USB 2.0 compatible, 12 Mb/sec
USB host
Flash drive formatted with FAT12, 16, or 32 file (front panel access)
RS-232
8 bit, 9600 – 38400 baud rate
GPIB (Option)
IEEE 488.1 compliant
Safety & Environmental
EMC
Conforms to European Union EMC directive
Safety
Conforms to European Union Low Voltage directive
Temperature
Operating
0 °C to 40 °C (32 °F to 104 °F), 80% relative humidity up to 31 °C (87.8 °F)
Storage
-25 °C to 65 °C (-13 °F to 149 °F)
Altitude
Up to 2000 m (6562 ft) above sea level
Warm up time
2 hours
Calibration
1 year
Power supply
100 V to 240 VAC, 50 Hz or 60 Hz, 120 VA maximum
Dimensions
Height
14.6 cm (5.75 in) 13.2 cm (5.2 in) without feet
Width
42 cm (16.5 in)
Depth
31 cm (12.5 in)
Weight
4 www.tek.com
9.5 kg (20.9 lb) – 4 channel instrument with GPIB option installed
PA3000 Power Analyzer
PA3000
PA3000 front panel
PA3000 rear panel with four input channels
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.
Product Area Assessed: The planning, design/development and manufacture of electronic Test and Measurement instruments.
www.tek.com 5
Datasheet
ASEAN / Australasia (65) 6356 3900
Belgium 00800 2255 4835*
Central East Europe and the Baltics +41 52 675 3777
Finland +41 52 675 3777
Hong Kong 400 820 5835
Japan 81 (3) 6714 3010
Middle East, Asia, and North Africa +41 52 675 3777
People's Republic of China 400 820 5835
Republic of Korea +822 6917 5084, 822 6917 5080
Spain 00800 2255 4835*
Taiwan 886 (2) 2656 6688
Austria 00800 2255 4835*
Brazil +55 (11) 3759 7627
Central Europe & Greece +41 52 675 3777
France 00800 2255 4835*
India 000 800 650 1835
Luxembourg +41 52 675 3777
The Netherlands 00800 2255 4835*
Poland +41 52 675 3777
Russia & CIS +7 (495) 6647564
Sweden 00800 2255 4835*
United Kingdom & Ireland 00800 2255 4835*
Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777
Canada 1 800 833 9200
Denmark +45 80 88 1401
Germany 00800 2255 4835*
Italy 00800 2255 4835*
Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90
Norway 800 16098
Portugal 80 08 12370
South Africa +41 52 675 3777
Switzerland 00800 2255 4835*
USA 1 800 833 9200
* European toll-free number. If not accessible, call: +41 52 675 3777
For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tek.com.
Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and
price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
14 Jan 2016
www.tek.com
CalPlus GmbH
Zentrale Berlin
Heerstraße 32 • 14052 Berlin
Tel.: 030 214982-0 • Fax: 030 214982-50
[email protected] • www.calplus.de
CalPlus GmbH
Niederlassung ScopeShop
Normannenweg 30 • 20537 Hamburg
Tel.: 040 3039595-0 • Fax: 040 3039595-50
[email protected] • www.calplus.de
55W-60309-0