Features of Thorowgood Saddles
Transcription
Features of Thorowgood Saddles
Why choose Saddles made in England changeable gullet conformation changeable Yourdesign horse needs a saddle that suits girth his breed or type and which can be straps adjusted should his condition change with workload, season or age. changeable gullet Saddles made in England Thorowgood has the answer. changeable moveable shimz blocks changeable gullet Features of Thorowgood Saddles changeable girth Easily change the conformation changeable straps gullet bar to best gullet design Saddles made in changeable England girth straps moveable Reposition the blocks blocks to give changeable changeable bespoke support girth shimz straps and comfort for conformation design moveable blocks fit the width of the horse’s withers. the rider’s leg. changeable changeable gullet stuffing Position the girth straps to achieve optimal saddle stability. Saddles specifically designed to fit different conformations. Saddles changeable made in girth England straps Two reinforced with real access slots to leather allow the stuffing in the panel to be easily adjusted. 30 years of saddle making expertise in Walsall. low medium Pressurewith real Testing Results wither conformation changeable eable moveablewither shimz uffing moveable leather changeable blocks design with real blocks The Thorowgood range of saddles has undergone rigorous stuffing leather evaluation by the Society of Master Saddlers’ Pliance pressure-mapping system which proved that: eable tuffing ium ither low wither An example of a saddle with a poor contact area high wither high wither chan `` Pressure under Thorowgood saddles is almost half of the maximum considered permissible. changeable changeable with real `` Thorowgood saddles have an extremely large contact area over the shimz stuffing leather horse’s back, so important for weight distribution. with real leather A Thorowgood saddle showing a very good contact area chan medium LOW wither Pressure PSI 0.15 0.15 0.15 0.73 1.02 0.73 1.02 1.45 1.45 2.18 2.18 5.08 6.53 5.08 6.53 HIGH high wither changeable stuffing t:01922 711676 thorowgood.com m Features changeable gullet Changeable Gullet Easily change the gullet bar to best fit the width of the horse’s withers Gullet Bar Widths: changeable XXW XW / XXW XW W / XW W M/W girth NB: There are two gullet bar lengths (R and S type) to suit the specific tree designs straps 2 1 3 M N/M 4 moveable blocks `` Step 1: Use the hex key to remove the 2 screws at the front of each panel. changeable with real stuffing leather `` Step 2: Slide the panel off the point of the tree. Saddles made in `` Step 3: Unscrew all 4 England bolts in the gullet bar and remove the gullet bar. Changeable Girth Straps changeable gullet `` Step 4: Insert different width of gullet bar. Insert all 4 bolts by hand then secure. conformation design changeable girth straps changeable shimz moveable blocks Position the girth straps to achieve optimal saddle stability medium wither high wither `` Always girth in the neutral position (2 & 3) when the saddle is first ridden. If the saddle moves forwards use positions 1 & 3. 1 1 2 `` If the saddle lifts at the back use 2 & 4. For increased stability, on a round barrelled / flat backed horse, use positions 1 & 4. changeable stuffing 3 with r leat 1 2 3 2 `` Step 1: Feed the strap through the ring with the point upwards and the top side of h themedium strap face down against wither w the sweat flap. `` Step 2: Curl the strap round and through the webbing loop. Saddles changeable the strap tight made in `` Step 3: Pull gullet England ensuring the webbing loop lies flat against the top of the conformation changeable Saddles changeable strap. (Reverse the above design made in girth gullet England straps steps to remove a girth strap). low wither Saddles made in England 4 changeable conformation changeableshimzdesign gullet moveable changeable blocks girth straps Saddles made in England We advise that saddle fitting is carried out by a saddle fitter changeable Saddles Saddles changeable conformation changeable changeable changeable made in made in shimz stuffing design gullet gullet girth England England straps moveable with real blocks leather conformation design t:01922 711676 thorowgood.com conformation conformationchangeable changeable changeable design design girth girth shimz straps straps moveable blocks changeable stuffing with real leather changeable shimz dium wither Conformation Design Saddles specifically designed to fit different conformations high wither low wither High withered horse medium wither low wither high wither Standard build horse Cob type horse Key fitting concerns related to different breeds / types of horse Clearance of the spine without pinching and saddle balance Relatively easy to fit but bearing surface should be maximised Saddle stability and minimising bulk between horse and rider Wither heights and back shapes Prominent wither and slender bodied Medium wither and average build Low withered, flat backed and big barrelled Key features Saddles made in England changeable gullet conformation Saddles design made in England Deep front and rear gussets ensure good wither clearance Standard depth gussets provide Saddles made in a balanced fit England changeable changeable girth gullet straps Slim-line rear andmoveable front gussets changeable Saddles blocks girth made in give a low profile fit straps England changeable conformation changeableshimzdesign gullet changeable Saddles Saddles changeable conformation changeable changeable changeable made in made in shimz stuffing design gullet gullet girth England England straps moveable with real blocks leather conformation design t:01922 711676 thorowgood.com conformation conformationchangeable changeable changeable design design girth girth shimz straps straps moveable blocks changeable stuffing with real leather changeable shimz Saddle Size Guide To find the perfect Thorowgood saddle for your horse you will need two measurements: Back Width. This refers to the shape across his back which can vary from narrow to extra-wide You will need e ff s id O `` A helper to hold your horse on firm, level ground `` A piece of chalk `` A flexicurve, available from your nearest stockist or an art or office supply shop, measuring 65cm. A piece of stiff wire cut to the same length is a good alternative `` A pen To determine the width of your horse or pony’s back, lay your shaped flexicurve on top of this guide. Line up the centre with the red cross and draw along the inside of the arch, continuing 6” (15cms) down each side in the colour coded areas at either end of the chart. Read your horse’s width fitting using the colour coded key on the next page. If you are in any doubt consult your local stockist or qualified saddle fitter for more advice. Gullet Bar Widths: XXW XW / XXW XW W / XW W M / W M N/M Step 1 Step 2 Make sure your horse is standing four-square with his head up and looking straight ahead. From the nearside (left), feel for the top edge of his shoulderblade (scapula) with your fingers. Lifting the nearside foreleg will help you find the scapula if you are not sure. When you have located the highest point of the scapula, use the chalk to mark a point roughly three fingers’ width behind it (towards the direction of the tail). Step 3 Step 4 Taking this mark as your starting point, mould your flexicurve up and over the withers. Lift the flexicurve gently and put it down in exactly the same place – it should settle snugly if it has been moulded correctly. Transfer the shaped flexicurve onto the back width chart and changeable gullet draw along the inside. NB: There are two gullet bar lengths (R and S type) to suit the specific tree designs Squeeze and shape the flexicurve so it hugs the contours of the Saddles made in England horse’s sides. id e rs a e N Horse orconformation Pony details changeable Saddles changeable design made in England girth gullet straps NameAge Sex Saddles made in England changeable conformation changeable Breed moveable changeable blocks girth straps shimzdesign gullet HeightWeight Saddles made in England Date measurement taken changeable Saddles Saddles changeable conformation changeable changeable changeable made in made in shimz stuffing design gullet gullet girth England England straps moveable with real blocks leather conformation design t:01922 711676 thorowgood.com conformation conformationchangeable changeable changeable design design girth girth shimz straps straps moveable blocks changeable stuffing with real leather changeable shimz
Similar documents
designed to - Flevo Horse Support
`` Changeable gullet, flocked panel and 4 girthing options allow this saddle to be tailored to fit. Secure seat, close-contact design and adjustable blocks help the rider to maintain a
More information