smooth silky

IMPORTANT SAFETY
INSTRUCTIONS
smooth silky
When using electrical appliances, basic precautions should always be observed,
including the following. Read all instructions before using this appliance.
READ ALL
INSTRUCTIONS
BEFORE USING.
DANGER
To reduce the risk of electric shock:
Use and
Care Guide
WDF-3600
Register Your New Product Today!
By registering your new Remington® product you will receive these important benefits:
Proof of ownership • Product protection • Product registration • Special offers
Register online at: http://prc.prodregister.com/remington/
● Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
● Except when charging, always
unplug this appliance from the
electrical outlet immediately after
using.
● Unplug this appliance before
cleaning it.
● Do not use an extension cord
or a voltage converter with this
appliance.
● Do not use while bathing or in the
shower if it is plugged in.
WARNING
To reduce the risk of burns, fire,
electric shock or injury to persons:
● This appliance is for household
use only.
● Close supervision is necessary
when this appliance is used by, on,
or near children or persons with
certain disabilities.
● Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by manufacturer.
● Keep the cord away from heated
surfaces.
● Never operate this appliance if
it has a damaged cord or plug, if
it is not working properly, if it has
been dropped or damaged, or if it
has been dropped into water.
● Do not use outdoors or operate
where aerosol (spray) products are
being used or where oxygen
is being administered.
● Plug charger directly into receptacle
– do not use an extension cord.
● Unplug charger before plugging or
unplugging appliance.
●D
o not store it in temperatures
exceeding 140°F (60°C).
● Do not plug or unplug this
appliance when your hands are
wet.
● Do not wrap the cord around the
appliance.
● Always attach the plug to the
appliance, then to the outlet. To
disconnect, turn all controls to
OFF, then remove plug from outlet.
Detach removable power cords
from appliances for storage.
● Never drop or insert any object
into any of the appliance’s openings.
● The power unit is intended to be
correctly oriented in a vertical or
floor mount position.
● Do not use this appliance with
a damaged or broken heads or
cutters, as injury may occur.
● This appliance is for use on leg
hair only. This appliance is not
recommended for use on head,
underarms or any other parts of
the body.
A shaving appliance is a washable shaver,
the hand-held part of which may be cleaned
under water.
SAVE THESE INSTRUCTIONS
Congratulations
on your new Remington® Smooth & Silky® Shaver!
Welcome to the world of electric shaving!
Now that you own an electric shaver, you are part of a growing group
of women with smooth legs–strong, beautiful women who lead busy,
demanding lives balancing family, friends, jobs, socializing, school,
sports, shopping, and much more. Women who are ready to ditch their
razors and pick up an electric shaver to ‘shave’ time by not having to
shave with messy creams and gels, as well as protect their legs from
nicks and cuts. And women who will not settle for anything less than
smooth & silky legs!
This is a complete guide with everything you have ever wanted to know
about your new electric shaver–and more! It provides details about
features, operating and caring for your shaver, and most importantly,
tips on how to get the closest shave for smooth & silky legs.
The model you have purchased can be used in or out of the shower–so
feel free to shave in the mall’s restroom, your shower, or even while you
watch TV. The shaver is also designed to hug the curves of your body
for a close, fast shave. We are glad you have chosen the electric shaver
journey to fulfill your shaving needs–from saving time to smooth legs.
–The Remington® Smooth & Silky® Team
If you don't read anything else,
read this!
1. A shaver should always be completely charged before its first us.
Typically, a new shaver should charge 24 hours before its first use.
2. Always store and transport your shaver with its protective head
guard on. This will keep the shaver's cutting surfaces working longer
and will prevent it from breaking.
3. A shaver can be used in or out of the shower, but always keep the
charging cord away from any water. The shaver will be damaged and
you can become severely injured.
4. Always use a light touch when shaving. Pressing harder will actually
cut fewer hairs because the pressure flattens the hairs, making them
almost impossible to cut.
5. Apply moisturizing lotion after every shave to make your legs feel
even more smooth & silky.
How To Use
Product Features
Shaver Parts
(A) Trimmer
(B) Foils
(C) Head release button
(D) Charging indicator (Green light)
(E) ON/OFF button
(F) Power port
(G) Bikini trimming head guard
(H) Cleaning brush
( I ) Power adapter
( J ) Moisturizing strip
Follow these simple steps to charge,
use, and clean your Remington®
Smooth & Silky® Shaver!
(B)
(J)
(C)
(A)
Wet/Dry
Even though it is an electric shaver,
our shavers are fully submersible,
and can be safely used in the shower
or tub.
Power System
Rechargeable shavers will run for
approximately 30 minutes when fully
charged. They will not shave while
they are charging.
Floating Trimmer
The floating trimmer will flex in
response to how much pressure
you apply to give you the closest
most comfortable shave.­
(D)
(E)
STEP ONE: Charge
● Make sure to charge your new
rechargeable shaver for 24 hours
before its first use. This first charge
is important to the shaver’s battery
life. After the first long charge, the
shaver will recharge more quickly.
● Take the charging unit that came
with the shaver and plug its cord
into an electrical outlet.
● Securely plug the charging unit
into the shaver in a safe place.
The green light indicates your
shaver is charging. The shaver
cannot be overcharged, so you
can leave it plugged in and
charging between shaves.
Note: To preserve the life of the
batteries, let them fully run out
every six months, then recharge
them for a full 24 hours.
(F)
(G)
CAUTION! Make sure the shaver
and your hands are dry when
connecting the shaver to an
electrical outlet..
Bikini Trimming Head Guard
To safely trim the bikini line, place
bikini trimming head guard on top of
shaver before use.
(H)
(I)
● When inserting the shaver into the
charging unit, avoid pushing on the
foils or they may become damaged.
● Always charge the shaver in a cool,
dry place.
● The charging unit can only be used
in North America.
STEP TWO: Use
●Press the ON/OFF button to turn the
shaver on.
● Hold the shaver so that the foils
touch your skin–this allows the
shaver to work the way it was
designed for the closest shave and
minimum wear.
● After shaving, press the ON/OFF
button again to turn the shaver off.
● Rinse the shaver head.
How To Use
STEP THREE: Clean
● This is an important step! It is
recommended to clean your
Remington® shaver after every
use for optimal performance.
●Make sure your shaver is in the
off position.
● Press the side release button to
slip open the head assembly.
● Foils – Do not use the brush to
clean the foils. Instead, blow the
shavings out or rinse the foils under
cold or warm water.
● Cutters and Trimmer – Use the
cleaning brush to sweep any
loose hairs from the cutters and
trimmers, or rinse/dunk them in
cold or warm water. Do not use
hot water.
● After cleaning, return the foil and
head assembly to heir original
position on the shaver.
● If the shaver was rinsed with water,
or if you used it in the shower, hold
it facing downward into the sink,
and turn it on for a few seconds
to dispel additional water. A gentle
shake will also help.
● To clean the external surfaces of
the shaver, use a damp cloth. Do
not use strong detergents or other
chemicals.
● To dry, wipe the surface of the
shaver with a dry towel. Do NOT
use a hairdryer or heater to dry the
shaver.
U.S. Residents: To order shaver
accessories, call 800-392-6544,
visit www.remington-products.com,
or visit your local retailer.
Usage Tips
Getting a close, comfortable shave
Remington® shavers need no
adjustments to their heads or cutters
before you shave. The heads will
automatically adjust to the contours
of your leg.
Adjusting to your new shaver
As with every shaver, your shave will
improve over time. So allow about
three weeks to develop an effective
shaving style and for your legs to
adjust to the new shaver. The adaptation period may take a little longer if
your skin is sensitive, or if you alternate between shaving methods.
Before You Begin
Make sure your legs are clean before
starting. Always use a clean shaver.
To Shave
Slide the ON/OFF button up to activate
the shaver for shaving.
● Hold the shaver so all the heads
touch your leg together. This allows
the shaver to work the way it was
designed for the closest shave and
minimum wear. Avoid holding the
shaver at an angle so only one head
touches the skin. This could cause
skin irritation.
● It is not necessary to apply
pressure while shaving, just let the
shaver glide lightly on your skin.
Never press hard. Pressing only
flattens your hairs, which makes it
harder for them to enter the cutting
chamber. It will also wear out the
cutting surface more quickly. A
gentle touch makes shaving easier
and helps avoid possible skin
irritation.
Shaving With Soap or Foam Lather
When using soap or foam lather, the
shaver will glide smoothly over the
skin, cleaning away oil residue while
at the same time leaving skin soft
and smooth.
Apply the soap or foam generously to
the skin. Do not use skin lotion, nourishing cream, or shaving cream of the
non-lathering type. Shaver should be
cleaned after using soap or foam.
CAUTION: Not recommended for use
on head, underarms or any other
parts of the body, unless using
bikini trimming head guard.
Frequently Asked Questions
Wet/Dry? I have no clue what that
means!
You can shave in the shower like you
would with a razor blade or outside
of the shower, dry, without any water,
shaving creams, or gels–just you and
your shaver! While using the shaver
dry, you will avoid any irritation that
would come from a dry razor blade
shave. While shaving wet, the shaver
can be fully submersed in water, so
you can safely use it in the shower or
tub. But remember–never charge your
shaver near water; the charging cord
cannot come in contact with water.
How do I operate the trimmer?
All Smooth & Silky® shavers are
equipped with a trimmer that works
with the foil. The trimmer prepares the
hairs by cutting the longest hairs and
standing up troubled hairs to give you
an extra-close, comfortable shave!
I went on a trip and left my head
guard at home–how can I get a
new one?
If you ever lose or damage your shaver, head guard, charger, or instruction
booklet, contact Spectrum Brands, Inc.
Customer Service at 800-736-4648 in
the U.S. or 800-268-0425 in Canada.
Someone will assist you in replacing
your lost or damaged part.
How often should I change my foils
and cutters?
A good rule of thumb for replacing
foils and cutters is every 6 to 12
months. This will keep your electric
shaver running smoothly and will give
you the closest shave without your
shaver dulling. Sometimes foils will
wear out more quickly due to friction
created inside the shaver while it
operates. Never use a shaver if the
foil is torn in any way; replace the
foils immediately.
I’ve never used an electric shaver
before–how am I even supposed to
hold this?
There is no correct way to hold an
electric shaver. The most important
part to remember is that the trimmer
and foils should glide over your skin
with little pressure. The foils should
lie flat against the skin–this helps you
achieve the closest shave.
Will shaving make my hair grow
back darker and thicker?
We all wonder this when our hair
starts to grow back after we shave,
but it’s not true! Removing hair from
the surface of the skin has no effect
on its color or thickness. The day or
two after shaving hair may appear
rough and coarse, but if the hair were
to continue growing it would return to
its original appearance.
Maintenance
Will shaving with an electric take
my tan away?
Nope! Skin’s color pigment is located
in deep layers of the skin and electric
shaving never comes close to those
layers so there is no need to worry
about losing your golden legs–just
make sure to keep them smooth &
silky with a Remington® shaver that
fits your lifestyle.
How do I charge my shaver?
Attach the head guard to the shaver
tightly, plug the charger into the wall,
then into the shaver. The on/off button will light up when your shaver is
charging. Remember to never place a
charging shaver near water.
My shaver doesn’t work when it’s
charging! What’s wrong?
Your shaver should not turn on while
it is charging. This way you will never
be tempted to take the charging
shaver into the shower or tub.
When to Replace Your Foils
and Cutters
It is very important to replace your foils
and cutters when necessary to ensure
a close, comfortable shave without
irritation. We recommend that the foils
and cutters be replaced every 6 to 12
months.
Here are some signs of foil and cutter
wear, indicating that replacement is
needed:
Irritation: If the foils get excessively
worn, you may experience some skin
irritation.
Drag: When the cutters wear, you may
feel a sense of pulling and a loss of
closeness when you shave.
Wear: Visually check the foils for
any signs that the cutters have
worn through the foils.
It is always best when replacing the
cutters to replace the foils at the
same time.
NOTE: The replacement part for your
shaver model is SP-360.
U.S. & Canadian residents: To order,
contact us at 800-392-6544, visit us
at www.remington-products.com or
visit your local retailer.
For Best Shaving Performance
We recommend that you use your
new shaver daily for two to three
weeks to allow time to find an optimum
shaving method for your particular
type of hair-growth patterns.
NOTE: In case of accidental separation
of shaver head: To reattach head, hold
on the fully open position, direct one
of the two hinges pins on the shaver
into corresponding slotted hole on
Warranty
the head assembly, then swing the
opposite hinge pin into place.
For assistance or help, call our
customer service at 800-736-4648 in
the U.S. or 800-268-0425 in Canada.
Battery Removal
When your rechargeable shaver
reaches the end of its useful life,
the batteries must be removed from
the shaver and recycled or disposed
of properly in accordance with your
state and local requirements.
CAUTION: Dispose of batteries
properly in accordance with your
local and state requirements. Do not
put in fire or mutilate your batteries
when disposing, as they may burst
or release toxic materials. Do not
short-circuit as it may cause burns.
Spectrum Brands, Inc. is a proud
participant in the EPA-approved
Call2Recycle™ program, which collects and recycles these Ni-Cd batteries at the end of their useful life, when
taken out of service in the United
States or Canada. The RBRC® program
provides a convenient alternative to
placing used Ni-Cd batteries into the
trash or the municipal waste stream,
which may be illegal in your area.
Please call 1-800-8-BATTERY™ for
information on Ni-Cd battery recycling
and disposal bans/restriction in your
area. Spectrum Brands' involvement
in this program is part of our commitment to preserving our environment
and conserving our natural resources.
How to Remove the Batteries
from the WDF-3600
(See diagrams below)
1. The WDF-3600.
2. Remove the the cap and unscrew
the screw located in the holder.
3. Open the upper and lower housing.
4. Open the inner housing and
remove the batteries.
5. Insulate battery ends by (1) placing
each battery individually into separate
plastic bags or (2) covering the terminals of each battery completely with
plastic or non-conductive electrical
tape.
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this
product against any defects that are
due to faulty material or workmanship for a two-year period from the
original date of consumer purchase.
This warranty does not include
damage to the product resulting
from accident or misuse.
If the product should become defective within the warranty period, we
will replace it free of charge. Return
your product and sales receipt with
your name, address and day time
phone number to: Spectrum Brands,
Inc., Attention: Consumer Services,
601 Rayovac Drive, Madison, WI
53711. For more information call
800-736-4648.
Warranty excludes:
● Foils and cutters
1.
2.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover
products damaged by the following:
● Accident, misuse, abuse or
alteration of the product
● Servicing by unauthorized persons
● Use with unauthorized accessories
● Connecting it to incorrect current
and voltage
● Wrapping cord around appliance
causing premature wear &
breakage
● Any other conditions beyond our
control
SPECTRUM BRANDS, INC.
SHALL NOT BE RESPONSIBLE
FOR ANY INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF
THIS PRODUCT. ALL IMPLIED
WARRANTIES, INCLUDING
BUT NOT LIMITED TO IM­PLIED
WARRANTIES OF FITNESS AND
MERCHANTABILITY, ARE LIMITED
IN DURATION TO TWO YEARS FROM
DATE OF ORIGINAL PURCHASE.
Performance Guarantee
This warranty gives you specific legal
rights and you may also have other
rights which vary from state to state
or province to province. Some states
do not allow the exclusion or limitation of incidental, special or consequential damages.
Performance Guarantee
Spectrum Brands, Inc.
Money-back Offer
If within 30 days after you have
purchased your Remington® branded
product, you are not satisfied and
would like a refund, return it with
the sales slip indicating purchase
price and date of purchase to the
retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse
all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning the money-back guarantee,
please call 800-736-4648 in the US
or 800-268-0425 in Canada.
120 VAC, 60 Hz
© 2009 ROVCAL, INC.
® REMINGTON and SMOOTH &
SILKY are Registered Trademarks of
ROVCAL, INC.
11/09 Job# 38981
Questions or comments:
Call 800-736-4648 in U.S.
or 800-268-0425 in Canada. Or visit
www.remington-products.com
Dist. by: Spectrum Brands, Inc.,
Madison, WI 53711
800-736-4648
Dist. by:
Spectrum Brands Canada, Inc.
Mississauga, ON L5L 0A1
800-268-0425
Designed in USA
T22-29344
Manufactured to Remington’s
specifications in the PRC.
Only adaptor model
PA-03.510-DVA
is UL listed.