MODULE

MODULE
PART NUMBER SWM-1
FOR USE WITH ANDROID AND APPLE Wi-Fi EQUIPPED DEVICES
81172
Page 1 of 14
REV n/c SAS 8/12
CUSTOMER WARNINGS

DO NOT USE THIS PRODUCT UNLESS YOU HAVE CONSULTED YOUR DOCTOR AND RECEIVED WRITTEN PERMISSION TO DO SO. USE OF THIS PRODUCT MAY BE
HAZARDOUS TO YOUR HEALTH.

STEAM IS HOT! DO NOT TOUCH OR GO NEAR THE STEAM HEAD FROM THE TIME THE UNIT IS “ON”, UP TO ONE HOUR FROM THE TIME THE UNIT IS OFF. SEVERE
BURN WILL OCCUR IF YOU COME IN CONTACT WITH THE STEAM HEAD OR STEAM EMITTING FROM THE STEAM HEAD.

NEVER ATTEMPT TO FILL AROMA THERAPY RESERVOIR ON THE STEAM HEAD WHEN UNIT IS IN THE “ON” POSITION. SEVERE BURNS WILL OCCUR.

DO NOT USE THERMASOL AROMA THERAPY OILS OR SKIN CARE PRODUCTS OR ANY PRODUCT IN CONJUNCTION WITH YOUR THERMASOL UNIT WITHOUT
CONSULTING WITH YOUR ALLERGIST OR DOCTOR BEFORE USE. THESE PRODUCTS MAY BE HAZARDOUS TO YOUR HEALTH.

YOUR SHOWER MAY BE A SLIP AND FALL HAZARD CHECK WITH YOUR CONTRACTOR OR TILE MANUFACTURER REGARDING THE SAFE USE OF YOUR FLOORING
IN A STEAM APPLICATION. SLIPPING AND FALLING INTO THE STEAM HEAD ITSELF OR INTO THE STREAM OF STEAM EMITTING FROM THE STEAM HEAD WILL
CAUSE SERIOUS BURNS, OR PHYSICAL INJURY.

DO NOT USE A STEAM ROOM WHILE UNDER THE INFLUENCE OF ALCOHOL OR DRUGS, AS THIS CAN BE HAZARDOUS TO YOUR HEALTH.

IF YOU ARE FEELING UNCOMFORTABLE, DIZZY, FAINT, OR STARTING TO FALL ASLEEP, IMMEDIATELY EXIT THE STEAM ROOM.

DO NOT USE A STEAM ROOM IF YOU ARE UNDER THE AGE OF 16 UNLESS SUPERVISED BY AN ADULT.

THERMASOL GENERATORS ARE FOR INDOOR USE ONLY. THEY SHOULD NEVER BE LOCATED OUTSIDE THE HOME.

THERMASOL GENERATORS ARE NOT TO BE USED FOR SPACE HEATING PURPOSES.

FOR SAFETY, SMOOTH OPERATION PRACTICE AND LIABILITY. IF YOU ARE A PLUMBER/INSTALLER, PLEASE ENSURE THIS OWNERS MANUAL & WARRANTY
INFORMATION IS IN TH OWNER’S POSSESSION WITH SPECIFIC DELEGATION FOR THE PURPOSE OF COMPLETELY FAMILIARIZING ANY USERS WITH THIS
PRODUCT.

DO NOT TAKE A PERSONAL ELECTRONIC DEVICE OF ANY TYPE THAT IS UNPROTECTED FROM MOISTURE INTO THE STEAM ENVIRONMENT. YOUR DEVICE WILL
BE DAMAGED

FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS SPECIFICALLY WILL CAUSE THE WARRANTY TO BE VOID.

NEVER OPERATE THIS PRODUCT UNLESS YOU ARE COMPLETELY AWARE OF ALL OCCUPANTS WITHIN THE SHOWER ENVIRONMENT.

NEVER OPERATE POWER FLUSH FEATURE WITH OCCUPANT(S) IN THE SHOWER ENVIRONMENT
*WI-FI TRANSMITTER LOCATED WITHIN THE SWM-1
FCC ID: R68MTCHDRCT
TO COMPLY WITH FCC RF EXPOSURE COMPLIANCE REQUIREMENTS,
FOR MOBILE CONFIGURATIONS, A SEPARATION DISTANCE OF AT LEAST 1”/ 20CM
MUST BE MAINTAINED BETWEEN THE ANTENNA OF THIS DEVICE AND ALL
PERSONS. THIS DEVICE MUST NOT BE CO-LOCATED OR OPERATING IN
CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER.
THE RCM5600W HAS BEEN TESTED AND FOUND TO COMPLY WITH:
• EN 300 328 v1.7.1
• EN 301 489-1 v1.8.1
• EN 301 489-17 v1.3.2 standards.
Japan
RCM5600W MODULES ARE CERTIFIED FOR USE IN JAPAN UNDER
ARTICLE 2-1-19. THE ACCEPTANCE NUMBER IS 003WWA090869.
CAUTION — EXPOSURE TO RADIO-FREQUENCY RADIATION.
81172
Page 2 of 14
REV n/c SAS 8/12
GETTING STARTED
CONGRATULATIONS, YOU HAVE PURCHASED THE THERMASOL SOLITUDE Wi-Fi MODULE THAT ALLOWS YOU TO CONTROL YOUR
STEAM SHOWER ENVIRONMENT FROM A Wi-Fi ENABLED DEVICE. IT IS IMPORTANT TO CAREFULLY READ AND FOLLOW THE
INSTRUCTIONS TO ENSURE A SMOOTH INSTALLATION AND OPERATION OF THIS AMAZING FEATURE.
WARNING: PLEASE TAKE TIME TO READ THE CONSUMER WARNINGS ON PAGE 2
READ FULL OWNERS MANUAL THAT WAS PROVIDED WITH STEAM GENERATOR SYSTEM AND OTHER ACCESORIES
CAUTION! ALWAYS PASSWORD PROTECT YOUR WiFi DEVICES TO PREVENT UNAUTHORIZED USE
DO NOT TAKE ANY PERSONAL ELECTRONIC DEVICE INTO THE STEAM ENVIRONMENT THAT IS UNPROTECTED FROM MOISTURE.
YOUR DEVICE WILL BE DAMAGED OTHERWISE. THERMASOL IS NOT RESPONSIBLE FOR DAMAGE IF IT SHOULD OCCUR.
RELIABLE WATER PROOF METHODS ARE AVAILABLE FROM 3RD PARTY MANUFACTURERS.
PLEASE DO YOUR RESEARCH TO ENSURE THE SAFETY OF YOUR DEVICE
THERMASOL STEAMBATH COMPANY
HEADQUARTERS & TECHNICAL SUPPORT
2255 UNION PLACE, SIMI VALLEY, CA 93065 – (800) 776.0711
WWW.THERMASOL.COM
NETWORK SYSTEM REQUIREMENTS:
WWW
INTERFACE……………….………………...……………………………WI-FI
802.11 B/G
POWER REQUIREMENTS…………………………………………100-240VAC 50/60HZ
INTERNAL OPERATING VOLTAGE………………….……………………….…...12VDC
NETWORK CONNECTIVITY MODES * – AD-HOC OR INFRASTRUCTURE
WIRELESS SECURITY - WPA, WPA2
WIRELESS ENCRYPTION – TKIP, AES
*NOTE: ANDROID BASED DEVICES ONLY SUPPORT INFRASTRUCTURE MODE
81172
Page 3 of 14
PARTS ENCLOSED:
1.
2.
3.
4.
5.
6.
SWM-1 SOLITUDE MODULE
INSTRUCTIONS (81172)
SWM-1 ANTENNA
12 VOLT POWER SUPPLY
POWER SUPPLY CORD
20 FOOT DATA CABLE
REV n/c SAS 8/12
INSTALLING SWM-1 TO YOUR THERMASOL STEAM/LIGHT AND MUSIC SYSTEM
THERMASOL STEAM SYSTEM COMPONENTS ARE PLUG AND PLAY. AS LONG AS YOU HAVE A CONTINUOUS PATH WITH THE YELLOW DATA CABLE FROM THE STEAM GENERATOR
TO THE CONTROL (Y CABLE WITH EASY START OUTSIDE CONTROL) YOU CAN ADD OR OMIT ANY ACCESSORY INCLUDING THE STEAM GENERATOR IF YOU CHOOSE ONLY TO HAVE
THE LIGHT AND SOUND SYSTEM AS THE ONLY FEATURE IN YOUR SHOWER ENVIRONMENT.
FOLLOW DIAGRAM ON THIS PAGE TO MAKE THE PROPER CONNECTIONS. ALSO, FIND A DRY LOCATION FOR ALL COMPONENTS AND YOUR SWM-1 MODULE
GENERATOR
110VAC
NOTE: THE SWM-1 MODULE
INCLUDES A WiFi ANTENNA.
AND POWER SUPPLY. MAKE
SURE ALL OF THESE ITEMS
INCLUDING THE DATA CABLES
ARE PROPERLY INSERTED AND
THE CONNECTIONS ARE TIGHT.
6
SWM-1
(PER GENERATOR AND LIGHT AND SOUND
INSTRUCTIONS 81127)
FIGURE 1
LIGHT & SOUND SYSTEM
W/ BLUETOOTH
208/240VAC
R/F WIRELESS REMOTE
IN SHOWER CONTROL
(One only)
EASY START
FULL SYSTEM WITH PRO
SERIES GENERATOR
LIGHT & SOUND SYSTEM
AND EASY START OUTSIDE
ROOM CONTROL
TO ENSURE THE COMPLETE SYSTEM IS FUNCTIONING PROPERLY PRIOR TO ATTEMPTING THE WiFi CONNECTION: TEST THE SYSTEM WITH THE WALL MOUNTED IN-ROOM
CONTROL. PLEASE FAMILIARIZE YOURSELF WITH THE AVAILABLE FUNCTIONS AND FEATURES USING THE WALL MOUNTED IN-ROOM CONTROL AND THE INSTRUCTIONS (81127)
PROVIDED WITH GENERATOR AND LIGHT AND SOUND SYSTEM.
81172
Page 4 of 14
REV n/c SAS 8/12
CONNECTING YOUR APPLE Wi-Fi DEVICE DIRECT
SYSTEM WITH APPLE DEVICE ONLY (NO HOME NETWORK)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
ENSURE YOU HAVE PROPERLY INSTALLED YOUR COMPLETE THERMASOL SYSTEM PER
PAGE 4 AND VERIFIED FUNCTIONALITY WITH THE IN-ROOM CONTROL.
AFTER SUCCESSFUL INSTALLATION, IN YOUR APPLE DEVICE LOCATE “SETTINGS”
THEN SELECT. (SEE SCREEN TO RIGHT)
ONCE IN SETTINGS SELECT THE WI-FI MENU.
MAKE SURE THE WI-FI IS SET TO “ON”. IN THE “CHOOSE A NETWORK “ BOX SELECT
TSOL_SWM
AFTER YOU SELECT TSOL_SWM YOU WILL SEE A CHECK MARK NEXT TO TSOL_SWM
NEXT TO THE WI-FI IN THE LEFT HAND MENU AND YOU WILL SEE THE
ICON
IN THE UPPER LEFT HAND CORNER OF YOUR DEVICE.
(DEPENDING ON WI-FI SPEED THIS MAY TAKE UP TO 3 MINUTES)
PRESS THE “HOME “ BUTTON ON YOUR DEVICE.
FOR NETWORKED DEVICE SEE NEXT PAGE. AND SKIP STEP 7-13.
LAUNCH THE SAFARI BROWSER FROM YOUR DEVICE
ENTER 169.254.101.77 INTO THE ADDRESS BAR AND PRESS GO
A) THE DEVICE SERVER CONFIGURATION MANAGER WILL OPEN, ON THE LEFT SIDE,
CLICK WLAN
B) FOR ADDED SECURITY, CHANGE THE NETWORK NAME (SSID) TO ANY CUSTOM
NAME, DON’T USE SPACES. (PLEASE NOTE AND/OR WRITE IT AND KEEP IN SAFE
PLACE.)
C) UNDER NETWORK WIRELESS SECURITY, CLICK ON SECURITY AND SELECT WEP
D) NEXT TO AUTHENTICATION, SELECT SHARED
E) NEXT TO ENCRYPTION CHOOSE 64 OR 128 BITS
F) NEXT TO KEY TYPE, MAKE SURE HEX IS SELECTED
G) ON THE KEY FIELD, TYPE IN A PASSWORD OF YOUR CHOICE TO CONSIST OF 10
CHARACTERS (FOR 64BIT) OR 26 CHARACTERS (FOR 128BIT) (CHARACTERS ALLOWED
ARE 0-9 AND A-F, NOT CASE SENSITIVE).
H) ON THE RETYPE KEY FIELD, TYPE IN THE PASSWORD AGAIN.
PLEASE NOTE AND/OR WRITE IT AND KEEP IN SAFE PLACE.
I) ON THE BOTTOM OF SCREEN, CLICK ON OK
J) ON THE LEFT SIDE, CLICK ON “APPLY SETTINGS” LINK
REPEAT STEPS 3 THROUGH 5 WITH YOUR CUSTOM SELECTED NETWORK NAME (SSID)
CHOSEN AT STEP 8 (B).
WHEN PROMPTED ENTER THE PASSWORD CHOSEN AT STEP 8 (H)
GO TO THE ITUNES APP STORE ON YOUR IPHONE, ITOUCH OR IPAD.
TYPE “THERMASOL” IN THE SEARCH BOX
SELECT THE THERMASOL APP AND DOWNLOAD
LOCATE AND LAUNCH THE THERMASOL APP ON YOUR APPLE DEVICE
YOUR INSTALLATION IS COMPLETE. GO TO PAGE 8 OF THESE INSTRUCTIONS FOR
LEARNING HOW TO FULLY OPERATE THE SOLITUDE WIRELESS APP
81172
TSOL_SWM
TSOL_SWM
RESETTING YOUR THERMASOL MODULE
BACK TO FACTORY DEFAULT SETTINGS
TO RESET THE THERMASOL MODULE’S IP ADDRESS AND OTHER DEFAULTS
BACK TO THE THEIR FACTORY SETTINGS USE A PAPER CLIP. STRAIGHTEN OUT
THE PAPER CLIP AND INSERT INTO THE RESET HOLE. YOU WILL FEEL A
BUTTON DEPRESS. THEN UNPLUG THE POWER. PLUG IN THE POWER WHILE
KEEPING THE RESET HELD FOR 10 SECONDS.
Page 5 of 14
REV n/c SAS 8/12
CONNECTING YOUR NETWORKED Wi-Fi DEVICE
YOU WILL NEED THE INFORMATION BELOW (ITEMS A-H) IN ORDER TO CONNECT TO YOUR HOME WiFi.
IF YOU ARE NOT FAMILIAR WITH HOME NETWORKING PLEASE CONTACT YOUR HOME NETWORK
PROFESSIONAL TO AID WITH A PROPER SET-UP. YOU CAN FIND A HOME NETWORK PROFESSIONAL
LOCALLY BY SEARCHING: “HOME NETWORK SUPPORT + (YOUR CITY)” IN ANY WEB SEARCH ENGINE.
NOTICE: THERMASOL IS NOT RESPONSIBLE FOR ANY DAMAGE OR LOST CONFIGURATIONS YOU MAY CAUSE TO YOUR NETWORK.
ITEM
DESCRIPTION
EXAMPLE
A
B
C
D
E
F
G
H
PROPOSED IP OF SWM-1 MODULE
NETWORK DHCP RANGE
SUBNET MASK
GATEWAY IP ADDRESS
SSID OF ROUTER/ACCESS POINT
WIRELESS NETWORK SECURITY
WIRELESS ENCRYPTION
SECURITY PASSPHRASE
192.168.1.40
192.168.1.50-150
255.255.255.0
192.168.1.1
MY_SSID
WPA2
CCMP/AES
MYWIFIPASSWORD
BRAND
Router/Gateway IP Address
DHCP Range *
Linksys/Cicso
192.168.1.1
100-149
DLink / Netgear
192.168.0.1
100-200
Belkin / SMC
192.168.2.1
2-100
2Wire / AT&T Uverse ver
3.5
172.16.0.1
33-254
2Wire / AT&T Uverse ver
3.7+
192.168.1.254
64-253
Qwest 2700
192.168.0.1
64-254
Apple
10.0.1.1
2-200
YOUR NETWORK CONFIGURATION
ALWAYS PASSWORD
PROTECT YOUR WiFi
DEVICES TO PREVENT
YOU WILL NEED ONE OF THESE UNAUTHORIZED
DEVICES BELOW IN ORDER
USE
TO CONNECT TO YOU HOME WiFi
YOU WILL NEED ONE OF THE FOLLOWING DEVICES
TO ACCESS YOUR HOME WiFi
APPLE PHONE, ITOUCH, IPAD
OR ANY WiFi ENABLED LAPTOP
For reference only: No matter the brand of router, its default internal IP address
is listed in the manufacturer's documentation.
*Note: To prevent possible IP conflicts, do not chose an IP
for TSOL_SWM to be within the DHCP range
81172
Page 6 of 14
REV n/c SAS 8/12
CONNECTING YOUR NETWORKED Wi-Fi DEVICE
BEFORE CONTINUING PLEASE COMPLETE THE TABLE LOCATED ON PAGE 6
THERE ARE TWO DIFFERENT HARDWARE REQUIREMENTS 1. APPLE 2. ANDROID
WORLD WIDE WEB
(NOT REQUIRED)
WIRELESS ROUTER (REQUIRED)
APPLE
PHONE OR TABLET DEVICE
WORLD WIDE WEB
(NOT REQUIRED)
ANDROID
(REQUIRED)
WiFi ENABLED LAPTOP
(REQUIRED)
1. APPLE
(REQUIRED)
PHONE OR TABLET
DEVICE
THERMASOL
SWM-1
NOTE: AS OF SEP. 2012 YOU CANNOT USE AN
ANDROID TABLET OR PHONE DEVICE TO
CONFIGURE WiFi NETWORKS. YOU MUST USE AN
APPLE DEVICE OR WiFI ENABLED LAPTOP
TYP
TYP
WIRELESS ROUTER ( REQUIRED)
THERMASOL
SWM-1
(REQUIRED)
OR
APPLE DEVICE
(REQUIRED FOR SETUP ONLY)
(continued PAGE 8)
81172
Page 7 of 14
2. ANDROID
REV n/c SAS 8/12
CONNECTING YOUR Wi-Fi DEVICE (continued)
1)
SEARCH THE WIRELESS AVAILABLE HOTSPOTS (STANDALONE) AND
E.
UNDER KEY TYPE SELECT HEX OR PASSPHRASE DEPENDS ON IF YOUR
PASSWORD IS IN TEXT OR HEXADECIMAL FORMAT (ITEM H)
F.
TYPE IN THE PASSPHRASE OR HEX KEY AT THE KEY LINE, AND RETYPE IT
BELOW. (ITEM H)
G.
LEAVE THE OTHER FIELDS DEFAULT UNLESS YOUR NETWORK REQUIRES
OTHERWISE.
H.
AT THE BOTTOM, CLICK ON OK , A “DONE” WOULD BE DISPLAYED NEXT TO IT.
CONNECT TO SSID TSOL_SWM.
2)
AFTER SUCCESSFUL CONNECTION, THE MODULE LED MARKED LINK
WOULD LIGHT SOLID. POINT YOUR WEB BROWSER (**) TO 169.254.101.77
**NOTE: WEB BROWSERS SUPPORTED ARE:
A.
INTERNET EXPLORER 6.0 AND UP
B.
MOZILLA FIREFOX 2.0 AND UP
C.
GOOGLE CHROME 18.0 AND UP
D.
APPLE SAFARI 3.0 AND UP
3)
A POP UP SCREEN MIGHT POP UP ASKING YOU FOR A USER NAME AND
PASSWORD.
4)
ENTER ADMIN FOR USERNAME, LEAVE PASSWORD BLANK, AND HIT LOGIN
5)
THE THERMASOL DEVICE SERVER CONFIGURATION MANAGER WILL BE
LOADED. ON THE LEFT HAND SIDE MENU,
6)
CLICK ON APPLY SETTINGS (ALLOW 30 SECONDS FOR THE THERMASOL
SWM TO RESTART.)
9)
RETURN TO WIFI SETTINGS AND RECONNECT TO WIFI HOME NETWORK.
10) FROM THE HOME SCREEN OF YOUR DEVICE, GO TO SETTINGS AND
LOCATE WIFI.
11) MAKE SURE YOUR DEVICE IS CONNECTED TO YOUR HOME WI-FI
NETWORK
12) ON A NEW WEB SCREEN, TYPE IN THE IP ADDRESS THAT YOU HAD USED
AT STEP 6(B) (ITEM A) ABOVE AND HIT ENTER. (YOU MIGHT BE PROMPTED
TO ENTER USER NAME AND PASSWORD. ENTER “ADMIN” FOR USER
NAME AND THE PASSWORD THAT YOU CREATED IN STEP 7(A).
CLICK ON NETWORK:
A.
CLICK AND SELECT “USE THE FOLLOWING IP CONFIGURATION”
B.
ENTER IP IN NETWORK RANGE BUT OUTSIDE DHCP RANGE. (ITEM A)
C.
NOTE THIS IP ADDRESS AND KEEP FOR LATER INSTALLATION PROCEDURE
D.
ENTER THE SUBNET MASK OF YOUR NETWORK (ITEM C)
E.
ENTER THE DEFAULT GATEWAY OF YOUR NETWORK (ITEM D)
F.
DNS CAN BE LEFT AT 0.0.0.0 OR UPDATED WITH YOUR LOCAL ROUTER DNS ENTRY
G.
CLICK ON OK , A “DONE” WOULD BE DISPLAYED NEXT TO IT.
7)
8)
13) IF SUCCESSFUL, THE THERMASOL DEVICE SERVER CONFIGURATION
MANAGER WOULD BE LOADED.
14) ENSURE THAT YOUR DEVICE HAS INTERNET CONNECTIVITY THROUGH
WIFI OR 3/4G.
15) GO TO YOUR APP STORE (GOOGLE MARKET/ANDROID- ITUNES/APPLE)
CLICK ON SERVER:
16) TYPE IN THERMASOL IN THE SEARCH BOX
A.
CREATE AND TYPE IN A PASSWORD FOR THE THERMASOL SWM MODULE(XXXX)
B.
RETYPE THE PASSWORD (XXXX)
C.
PLEASE WRITE DOWN THIS PASSWORD AND KEEP IN A SAFE PLACE.
D.
AT THE, CLICK ON OK , A “DONE” WOULD BE DISPLAYED NEXT TO IT.
A.
ENTER THE SSID OF YOUR NETWORK (E.G. MY_SSID) (ITEM E)
B.
UNDER NETWORK TYPE: CLICK AND SELECT INFRASTRUCTURE.
17)
ONCE THERMASOL APP IS DISPLAYED, CLICK ON DOWNLOAD/UPDATE
IF ALREADY INSTALLED.
APPLE:
18)
GO TO SETTINGS , UNDER APPS YOU WILL FIND-> THERMASOL. CLICK
ON THERMASOL
A) TYPE IN THE IP ADDRESS SET IN STEP 6(B), (ITEM A).
B) VERIFY THAT DEMO MODE IS OFF.
19)
LOCATE AND LAUNCH THE THERMASOL APP.
C.
UNDER WIRELESS NETWORK SECURITY, SELECT THE SECURITY BASED ON YOUR
ANDROID:
NETWORK (E.G. WPA2/802.11I) (ITEM F)
20) LOCATE AND LAUNCH THE THERMASOL APP.
21) A POPUP SCREEN WOULD PROMPT YOU TO ENTER IP ADDRESS OR
SELECT DEMO MODE.
22) TYPE IN THE IP ADDRESS SET IN STEP 6(B), (ITEM A) AND CLICK YES.
8)
CLICK ON WLAN:
D.
LEAVE THE DEFAULT ENCRYPTION UNCHANGED UNLESS YOUR NETWORK USES A
DIFFERENT ONE. MODIFY IT TO MATCH YOUR NETWORK (E.G CCMP) (ITEM G)
81172
Page 8 of 14
REV n/c SAS 8/12
STARTING AND CONTROLLING YOUR STEAM SESSION:
USER 1 AND USER 2 PRESETS:
HOME MENU
STARTING YOUR EXPERIENCE BY PRESSING THIS BUTTON
STEAM MENU
FIRST (1 OR 2). WILL SAVE ALL YOUR FAVORATE SETTINGS
IN THAT USER 1 OR USER 2 MODE.
FROM THE HOME MENU SELECT THE STEAM BUTTON.
THE STEAM MENU WILL APPEAR.
DISPLAYED ON THE GAUGES
USER PRESETS
(LEFT - TEMPERATURE) CURRENT ROOM TEMP. SET TEMP
(RIGHT - TIMER) TIME REMAINING , SESSION SET TIME
TO TURN ON STEAM PRESS THE POWER BUTTON
IT WILL TURN GREEN UPON ACTIVATION
STEAM MENU
SET POINT
POWER BUTTON
(OFF SHOWN)
TO SET THE TIME OR TEMP USE THE +/- BUTTONS TO
INCREASE OR DECREASE SETTINGS. YOU CAN ALSO SLIDE
YOUR FINGER ALONG THE BEZEL EDGE FOR FASTER RESULTS.
BEZEL
EDGE
BEZEL EDGE
NOTE: YOUR LAST SETTINGS WILL BE SAVED TO YOUR USER 1
OR USER 2 PRESETS 5 SECONDS AFTER SELECTION (SEE BELOW).
CURRENT
TO TURN OFF STEAM SESSION PRESS THE POWER BUTTON
IT WILL TURN RED, CONFIRMING STEAM SEESSION IS OFF.
ADJUSTMENT BUTTONS
81172
Page 9 of 14
REV n/c SAS 8/12
STARTING AND CONTROLLING YOUR MUSIC SESSION:
HOME MENU
FROM THE HOME MENU SELECT THE MUSIC ICON
OR PRESS THE MUSIC BAR FOR THE STATUS ON THE
HOME MENU.
(TO SAVE SETTINGS MAKE SURE YOU ARE IN USER 1 OR 2)
THE MUSIC MENU WILL APEAR.
MUSIC MENU
DISPLAYED IS MASTER VOLUME, EQUALIZER BUTTON
AND 3 INPUT SELECTIONS (FM RADIO, AND TWO INPUTS)
TO MUSIC MENU
MUTE
INPUT 1 AND INPUT 2 CAN ACCEPT RCA STYLE
CONNECTIONS. (IPOD, CABLE TV BOX, ETC.)
TO TURN MUSIC ON/OFF PRESS THE POWER BUTTON
IT WILL TURN GREEN UPON ACTIVATION AND RED WHEN OFF
VOLUME CONTROL
SLIDE FINGER FOR MASTER VOLUME
TO ADJUST VOLUME: SLIDE YOUR FINGER FROM LEFT/ RIGHT ON THE MASTER
VOLUME BAR. PRESS X TO MUTE/UNMUTE.
MUSIC MENU
EQ
INPUT SELECTIONS
TO SELECT INPUTS:
PRESS FM, INPUT 1 OR INPUT 2 BUTTONS
ON/OFF
NOTE: THERMASOL INCLUDES A BLUE TOOTH ADAPTER
WITH EVERY LIGHT AND SOUND SYSTEM SO YOU CAN USE
BLUE TOOTH ENABLED DEVICES TO STREAM YOUR MUSIC
TO THE SYSTEM AND USE THAT DEVICE TO CONTROL PLAY
SELECTION. HAVE INSTALLER MAKE NOTE OF INPUT USED.
EXAMPLE: IPOD INPUT 1 -BLUETOOTH INPUT 2
STARTING AND CONTROLLING YOUR MUSIC CONT. NEXT PAGE
81172
Page 10 of 14
REV n/c SAS 8/12
STARTING AND CONTROLLING YOUR MUSIC SESSION CONT.
SLIDE FINGER FOR MASTER VOLUME
FM RADIO MENU
USING FM RADIO:
FROM THE MUSIC MENU SELECT THE FM ICON
THE FM MENU WILL APEAR.
SEEK
SEEK
TUNE
SET
PRESETS
TO SELECT RADIO SATION:
USE THE SEEK BUTTONS TO INSTANTLY LOCATE
A STATION.
USE THE TUNE BUTTONS TO MANUALLY LOCATE
A SPECIFIC STATION YOU DESIRE.
FM PRESETS:
TO PRESET UP TO 6 STATIONS PRESS THE SET BUTTON
SLIDE FINGER FOR MASTER VOLUME
EQUALIZER MENU
THEN PRESS THE PRESET BUTTON (1-6)
THE STATION WILL BE SAVED TO THAT PRESET NO.
USING THE EQUILIZER:
SLIDE FINGER FOR TREBLE
FROM ANY MUSIC MENU PRESS THE EQ BUTTON .
THE EQ MENU WILL APPEAR.
SLIDE FINGER FOR MIDRANGE
SLIDE FINGER FOR BASS
USE THE SLIDER WITH YOUR FINGER TO ADJUST BASS, TREBLE AND MIDRANGE
LEVELS TO YOUR PREFERENCE.
YOU CAN RETURN TO THE MAIN MUSIC MENU ANYTIME
BY PRESSING THE BACK BUTTON
81172
Page 11 of 14
REV n/c SAS 8/12
CONTROLLING YOUR LIGHTING FEATURES:
HOME MENU
FROM THE HOME MENU SELECT THE LIGHT ICON
OR PRESS THE LIGHT BAR ON THE HOME MENU STATUS
(TO SAVE SETTINGS MAKE SURE YOU ARE IN USER 1 OR 2)
THE LIGHT MENU WILL APPEAR.
LIGHT MENU
TO TURN SHOWER LIGHT ON/OFF:
TO LIGHT MENU
TO TURN ON PRESS THE POWER BUTTON. (GREEN ON)
TO TURN OFF PRESS THE POWER BUTTON AGAIN.
BRIGHT WHITE LIGHT:
BRIGHTNESS CONTROL
THIS SYSTEM USES R-G-B LED LIGHTING. THIS IS
SIMILAR TO YOUR TELEVISION. WHEN ALL R-G-B LIGHTS
ARE ON FULL POWER, WHITE LIGHT IS PROJECTED INTO
THE SHOWER SPACE.
LIGHT MENU
UNLIMITED CUSTOM LIGHT HUES (SHADES OF COLOR):
LIGHT TYPE SELECTIONS
SHOWER LIGHT
TO MAKE A CUSTOM HUE OF LIGHT SIMPLY MAXIMIZE
SLIDE FOR BRIGHTNESS
OR REDUCE OTHER HUES OF LIGHT.
FOR EXAMPLE:
RED AND BLUE BUT NO GREEN MAKE PURPLE HUES.
RED AND GREEN BUT NO BLUE MAKE ORANGE HUES.
GREEN AND BLUE BUT NO RED MAKE GREEN HUES.
SAVING YOUR CUSTOM COLOR:
AFTER YOU HAVE CHOSEN A PARTICULAR SHADE OF
R-G-B HUE CONTROL
LIGHT YOU FIND SOOTHING PRESS THE SET BUTTON
THEN 1-4 TO SAVE INTO YOUR USER SETTINGS.
CUSTOM PRESETS 1-4
81172
NOTE: YOU MUST BE IN A USER 1 OR 2 MODE TO SAVE.
CONTROLLING YOUR LIGHTING FEATURES CONT. NEXT PAGE
Page 12 of 14
REV n/c SAS 8/12
CONTROLLING YOUR LIGHTING FEATURES CONT:
MOOD LIGHT MENU
MOOD LIGHTING (AUTOMATIC CHANGING COLORS):
LIGHT TYPE SELECTIONS
TO TURN MOODLIGHT ON/OFF:
TO TURN ON PRESS THE POWER BUTTON.
TO TURN OFF PRESS THE POWER BUTTON AGAIN.
SLIDE FOR BRIGHTNESS
CHROMATHERAPY:
TO TURN CHROMATHERAPY LIGHT ON/OFF:
TO TURN ON PRESS THE POWER BUTTON.
TO TURN OFF PRESS THE POWER BUTTON AGAIN.
SELECTING CHAKRAS:
FROM THE CROMATHERAPY MENU SIMPLY PRESS
THE CHAKRA YOU DESIRE BY PRESSING THE ROUND
BUTTON NEXT TO DESCRIPTION(S). A DETAILED
DESCRIPTION WILL POP UP IN A SUB MENU.YOU CAN
CHROMATHERAPY MENU
ALSO USE THOSE ROUND BUTTONS TO SELECT A CHAKRA.
EXAMPLE:
FOR HARMONY – CHEST
PRESS HERE
ADJUSTING LIGHT BRIGHTNESS/INTENSITY (ALL LIGHT MODES):
FROM ALL LIGHT MENUS SIMPLY USE YOUR FINGER TO SLIDE FROM RIGHT/LEFT
TO INCREASE DECRESE OVERALL BRIGHTNESS.
SLIDE FOR BRIGHTNESS
81172
Page 13 of 14
REV n/c SAS 8/12
EXPANDED SYSTEM FEATURES AND DIAGNOSTICS
YOUR SOLITUDE Wi-Fi CONTROLLER SYSTEM ALLOWS YOU TO CONTROL AND REVIEW SYSTEM STATUS. SUCH AS: ACTIVATING THE POWERFLUSH
FEATURE IN YOUR GENERATOR, CHECK BATERY LEVEL IN R/F REMOTE OR ANALIZING SUPPLY VOLTAGE FROM YOUR HOUSE TO YOUR GENERAT0R
TO ACCESS THIS EXPANDED MENU SELECTION PRESS THE OPTIONS BUTTON LOCATED ON THE HOME MENU IN THE UPPER RIGHT HAND CORNER.
TO RETURN BACK TO THE HOME MENU PRESS THE HOME BUTTON AT ANY TIME
AUTO POWERFLUSH MENU: FOR STATUS OF NEXT
POWERFLUSH CYCLE OR TO ACTIVATE A CURRENT
REQUIRED CYCLE THIS IS THE MENU FOR YOU. TO
ACTIVATE CYCLE: SIMPLY PRESS THE ACTIVATE
BUTTON AND EXIT THE SHOWER. READ OWNERS
MANUAL FOR POWERFLUSH INSTRUCTIONS.
GENERATOR MENU: THIS MENU IDENTIFIES
GENERATOR SOFTWARE VERSION, ACTUAL
VOLTAGE TO THEUNIT FROM YOUR HOME AND
ALSO ALLOWS YOU TO TURN ON/OFF FAST START
FEATURE FOR VACATION HOME INSTALLATIONS.
REMOTE MENU: IF YOU
HAVE THE LIGHT AND
SOUND SYSTEM WITH
R/F REMOTE CONTROL
THIS SCREEN WILL
ALLOW YOU TO CHECK
BATERY LEVEL AND ALSO
CHANGE THE REMOTE
UP TO 4 FREQUENCIES
FOR USE OF MULTIPLE
UNITS IN ONE HOME.
81172
Page 14 of 14
LIGHT AND SOUND SYSTEM MENU: THIS MENU
IDENTIFIES R/F REMOTE FREQ. INTERNAL
SOFTWARE VERSION PLUS VARIOUS VOLTAGE AND
TEMPERATURES. IF YOU WOULD LIKE TO TURN
OFF/ON THE VOICE RESPONSE FEATURE. PRESS THE
ON OR OFF BUTTONS
HELP MENU: PROVIDES
EMAIL LINK TO
THERMASOL’S
CUSTOMER SUPPORT
NETWORK. OR SIMPLY
CALL, (800) 776.0711
REV n/c SAS 8/12