Live The Legacy

™
CUSTOM ALUMINUM BOATS. BACKWATER MOTORS. BOAT BLINDS.
Live The Legacy...
CUSTOM BOATS
Aluminum, Flat-Bottomed
At Beavertail, we’re building a legacy one boat at a time. In this one size fits all world, we’re proud to go against the
grain and build a boat specific to your needs, not what a production line thinks you should have. At the heart of every
Beavertail boat, you’ll find features that other manufacturers call “options”, but we consider them standard equipment.
FEATURES:
All Welded, Durable 100 Gauge Aluminum Hull, Stern & Sidewalls
Flat, Diamond Plate Floors & Forward Deck for an Ultra-Stable System
Foam-Filled Floor, Front Deck & Flotation Pods for Extra Lift & Load Offset
Exclusive Forward Tapered Front Deck to Run Water out of the Bow
Drop Floor in Stern for Securing Batteries & Fuel Tank
24” Sidewalls
Two, 10 Ft. Water-Resistant Gun Boxes for Stowing Extra Gear
1
AVAILABLE BOATS:
HD Rub Rail Sidewall Cap
Patent Pending Performance Flotation Pods
Built-In Interior Tubing for Accessory Wiring
Front and Rear Exterior Grab Handles
Interior Mounted HD Tie-Down Loops
HD Olive Drab Paint For A
Non-Reflective Wear-Resistant Finish
#400106 - 15’ Long with 48” Wide Bottom
#400009 - 16’ Long with 48” Wide Bottom
#400107 - 16’ Long with 54” Wide Bottom
#400110 - 17’ Long with 54” Wide Bottom
#400112 - 18’ Long with 54” Wide Bottom
#400111 - 17’ Long with 60” Wide Bottom
#400113 - 18’ Long with 60” Wide Bottom
#400116 - 20’ Long with 60” Wide Bottom
#400117 - 20’ Long with 72” Wide Bottom
Foam-Filled Floor
Built-in Interior Tubing
Front Deck and Pods for Accessory Wiring
for Extra Flotation
and Load Off-Set
Two, 10 Ft. Water-Resistant
Gunnel Boxes for Stowing
Firearms, Fishing Rods and
Extra Gear
24 “ Sidewalls
Front and Rear Exterior
Grab Handles
+
+
+
+
Drop Floor in Stern
for Securing Batteries
and Fuel Tank
+
Interior
Mounted
Heavy-Duty
Tie-Down Loops
+
+
+
Heavy-Duty
Rub Rail
Sidewall
Cap
+
+
Flat Tread Plate Floors
and Forward Deck
For an Ultra Stable
Operating Platform
+
+
+
Exclusive Forward Tapered
Front Deck to Run Water
Out of the Bow Drain Hole
and Away From You and
Your Gear
Super-Durable
Olive Drab Paint
for a Non-Reflective
Wear-Resistant Finish.
Note: Camo Paint
upgrade shown
Note: Boat shown with optional
Swamp Lights, Motor, Trolling
Motor Mount, Camo Seating
and Camo Paint upgrade.
All Welded, Durable .100
Gauge Aluminum Hull, Stern
and Sidewall Construction
(.125 available)
Patent Pending
Performance
Flotation Pods
Shown Left:
Standard Equipment with
Optional Long Shaft Motor,
Seats and Trailer.
2
™
BOAT OPTIONS
With Beavertail’s full line of Custom Boat Options, you can customize your boat the way YOU want it!
For Custom Boats
AVAILABLE OPTIONS:
3
#400235 Custom Camo Paint
#400197 Navigation Lights (Switched Front & Rear w/ Panel)
#401174 LED Swamp Headlights (Rigid Industries E-Series 10” Flood/Spot Combo)
#400198 Swamp Headlights (Switched 1 Spot, 1 Flood w/ Panel)
#400036 Bilge Pump (Switched)
#400196 3 Interior Lights (Switched)
#400851 12 Volt Plug-In (Front or Rear)
#400027 Removable Stand Up Bar
#400259 Camouflage Seat (w/ Hydraulic Pedestal)
#400237 Seat Pedestal Bases (Welded Into Boat Floor)
#400132 Center Console with Steering Wheel & Cables
#XXXXXX Side Console with Steering Wheel & Cables
#XXXXXX 15” Front Deck Extension
#400006 15” Front Deck Extension w/ Storage Compartment
#400227 Trolling Motor Mount System w/ Wiring & Plate
#400165 Wider Gun Box (Each)
#400200 Live Well in Starboard Wider Gun Box
#400252 10’ Aluminum Push Pole
#400169 10’ Push Pole Mounting System (Installed)
#400095 Bow Shooting Platform
#400195 Dog Ladder
#400030 Battery 1000 CCA
#400029 Battery 500 CCA
#400034 Battery for 6 HP Motor
#400032 Battery Box
#400013 20” Transom
#400270 Fuel Tank
#400201 Stake-Off Loops
#400183 Ice Breaker Corner Guards
#400015 28” Sidewalls for 48” - 60”
#400178 .125 Gauge Bottom;
(must have if ordered w/o Keels)
(1000 Ft Beam
/ 50 Ft Flood)
#400198 Swamp Headlights
Switch Panel (for Lights)
#400013 20“ Transom
(775 M)
#401174 LED Swamp Headlights
#400197 Navigation Lights (Front & Rear)
#400196 LED Interior Lights
#400259 Hydraulic Pedestal Seat
#400237 Seat Pedestal Base
#400165 Wider Gun Box
#400195 Dog Ladder
#400183 Ice Breaker Corner Guards
#400252 10’ Ft. Push Pole W/ #400169 Mount
Shown Left:
Optional Flip-Over Style
Boat Blind in Muddy Water
Timber Tantrum Pattern.
#400227 Trolling Motor Mount System
4
LONG TAIL MOTORS
Backwater Motors
Beavertail’s legendary motors are the 4 x 4’s of boat motors. Our design philosophy has strayed considerably
from the pack, and our refusal to conform is why we set trends instead of follow them. With models ranging
from the lightweight 6.5 HP to the 35 HP beast, we’ve got a long shaft backwater motor to suit your application.
#400214 - BEAVERTAIL 6.5 HP VANGUARD
ALL ALUMINUM SUPER-LITE
The smallest of the Beavertail line, making it the ideal
choice for applications where you want to keep weight
to a minimum. Lightweight status, big performance.
7 x 4 Performance Series X propeller
#400208 - BEAVERTAIL 13 HP VANGUARD MARINE
A very capable and easy to operate motor that really
delivers. Excellent for small to medium boats.
8 x 4 Performance Series X propeller
#401089 - BEAVERTAIL 23 HP VANGUARD MARINE
Energetic and quick starting. This powerhouse features
a number of advanced technologies Excellent for small
to medium boats.
9 x 4 Performance Series X propeller.
FEATURES:
5
See Back of Catalog Cover
Uni-Seamless, Robotics Welded Steel Frame (CNC Milled & Laser Cut For Alignment Accuracy)
For All Beavertail Motor Specs
Flat Marine Olive Drab Powder Coat with Zinc-Rich Undercoat Primer Powder Coat
Patent Pending Stainless Steel Removable Bearing Assemblies
Upper & Lower Stainless Removable Caps & Housings
Polished, Ground Balanced & Electroless Nickel-Plated Drive Shaft
Performance Series Stainless Steel Prop (CAD/CAM Designed for Precision Accuracy, Super Weedless, Heavy Cupped)
Exclusive 360 Degree Swivel Tailshaft (swings into boat) with True Safety Stop Spring Pin;
Rubber-Mounted Engine Adjustment Bolts for Motor Trimming Capabilities
#401150 - BEAVERTAIL 26.5 HP KOHLER EFI
Exclusive closed-loop technology. Better fuel
efficiency, adapts to weather, reliable starts,
all out performance.
9 x 7 Performance Series X propeller
#400212 - BEAVERTAIL 35 HP VANGUARD MARINE
With its legendary power & durability, this is the
epitome of what a backwater motor should be.
If you need ultimate speed and backwater
capability, the 35 is for you.
9 x 6 Performance Series X propeller
#401194 - BEAVERTAIL 37 HP VANGUARD EFI
Exclusive Closed-Loop Technology.
Better fuel efficiency. Adapts to weather.
Reliable Starts.
9 x 6 Performance Series X propeller
BEAVERTAIL PROPS:
AVAILABLE PROPS:
Beavertail propellers are designed with a CAD/CAM computer system
system and are extensively tested to match each
engines power characteristics. Other propeller manufacturers simply
simply do not have the computer system and engine
detail necessary to design propellers which exactly match engine
engine design. We believe that when you purchase the
finest mud motor available, you deserve the finest propeller.
#400855 - 7 x 4
#400856 - 8 x 4
#400858 - 9 x 5
#400862 - 9 x 7
#400860 - 9 x 6
This is the top of the line propeller, specifically designed
gned for the combination of high speed and aggressive mud
performance. The Series X Propellers are designed with blades specifically
specifically shaped and negatively raked to reduce
any chance of weed buildup around the propeller hub. These props are standard on all Beavertail Motors.
(6 HP)
(13 HP)
(20 HP)
(24 HP, 26.5 HP)
(35 HP)
™
6
SURFACE DRIVE MOTORS
Backwater Motors
Beavertail Surface Drive Motors make short work of any swamp, bayou, backwater or slough. WIth a
geometrically reinforced all aluminum frame and housing, frame weight is minimized to deliver outstanding
power to weight ratio. We’ve spent countless hours on the water, pushing and perfecting the frame and
drive system to ensure you are getting the most optimized surface drive available.
BEAVERTAIL 35 HP VANGUARD MARINE
BEAVERTAIL 37 HP VANGUARD EFI
This motor is all about optimizing
performance! Utilizing the Vanguard
marine engine, it delivers awesome
acceleration along with great top end
speed. If you are looking for serious
performance this is the motor for you!
12 x 10 Performance Series X Prop
Exclusive Closed-Loop Technology.
Better fuel efficiency, adapts to weather,
reliable starts, all out performance!
12 x 10 Performance Series X Prop
#401172 - Short for 16” Transom
#401173 - Tall for 20” Transom
#400216 - Short for 16” Transom
#400220 - Tall for 20” Transom
Shown with Tall Transom
FEATURES:
All Aluminum Housing (drastically reduces overall weight)
Extended Drive Shaft (allows for deeper surface penetration)
Tilt and Trim Travel Lock
Easy Access Belt Tensioner
Easy One Hand Operation
7
Shown with Tall Transom
CMC Tilt and Trim Actuator
Hydraulic Actuators are completely self-contained
with their own fluid reservoir. They incorporate the
pump, motor, reservoir and cylinder all in the same
body. This eliminates the need for multiple hydraulic
components such as hoses, pumps and cylinders.
Actuator can be utilized in almost any type of
environment. Made of 100% non-ferrous materials
and are totally submersible. They contain a no-leak
seal and wiper that keeps dirt and water out of the
working parts.
Actuator Features:
6061 - T6 Aluminum Alloy Construction
18.8 Stainless Steel Fasteners
Thrust (Extend): 5000 Lbs. Min.
Thrust (Retract): 3750 Lbs Min.
See Back of Catalog Cover
For All Beavertail Motor Specs
PERFORMANCE PODS
Revolutionary Flotation Technology
Beavertail’s revolutionary Flotation Pod technology changes the game forever. To obtain maximum motor efficiency, you need
the longest plane possible. Our Performance Pods not only increase the plane of your boat, but also offer up to 200 Lbs of extra
flotation. This extra flotation off-sets the negative performance often associated with the extra weight of a conventional 4-stroke,
air-cooled motor. You’ll get up on the plane faster, and run through shallow water that bottoms out competitive boats.
FEATURES:
Up to 200 Lbs of Extra Flotation
Eliminates Negative Performance Associated with the
Weight of a 4-Stroke Air-Cooled Motor
Eliminates Tail Drag Associated with Shallow Water Running
Boats Float Flat and Draft Considerably Less Providing
Virtually Unlimited Capabilities in Shallow Water
Dramatically Increases Out of the Hole Take Off
Significantly Reduces All Transom Back Splash
AVAILABLE PODS:
Funnels Water To the Propeller in the Shallowest
#400245 Small - Fits 14’, 15’, 16’ Boats
Environments Providing the Ability to Start Out and
#400244 Medium - Fits 17’, 18’ Boats
Get on Plane Conditions Like Never Before
#400243 Large - Fits 20’ Boats
No “Over-Turning Your Mud Motor” Worries
Helps Limit Uncontrolled Spins (by acting as a stop)
Reduces Engine Laboring and Fuel Consumption
Compliments Engine Power Trim
Engineered For Strength
Can Also Function as a Dog Sitting Platform (while stopped)
™
8
BOAT BLINDS
The Original Flip-Over Blind
Beavertail full-size boat blinds are designed not only for exceptional concealment, but also superior functionality.
These blinds attach to your boat with our exclusive telescoping frame system, which means no holes to drill
and attachment / detachment is a snap. All blinds provide more than enough clearance for everyone in the boat,
no matter where you are seated, and are designed to work with both backwater motors and standard outboards.
Our Boat Blinds also lay directly on the side rail which means unobstructed access to gun boxes and accessories.
AVAILABLE BLIND PATTERNS:
MUDDY WATER TIMBER TANTRUM
SERIES BOAT BLIND FEATURES:
9
600 Denier Cordura Stitched with Nylon Thread
Adjustable Telescoping Frame System
Marine Grade Aluminum, Stainless Steel and Galvanized Frame Tubing
The Only Gunnel-to-Gunnel Clearance Frame in the Industry
Ultimate Clearance Allows Use of Bench Seats, Gun Boxes & Storage
Closeable Shooting Holes
Sewn-On Vegetation Straps For Complete Camouflage
Quick Attach / Detach - No Drilling
Can Be Broken Down For Easy Storage / Transport
REALTREE MAX-4
AVAILABLE SERIES BOAT BLINDS:
Exclusively Designed to Run
WIth a Mud Motor; Equally
Effective with Outboards
Accommodates Square-Front
and V-Front Jon Boats
#400037 1400 Series - Realtree Max-4
#401144 1400 Series - M.W. Timber Tantrum
#400043 1600 Series - Realtree Max-4
#401145 1600 Series - M.W. Timber Tantrum
#400046 1800 Series - Realtree Max-4
#401146 1800 Series - M.W. Timber Tantrum
#400053 2200 Series - Realtree Max-4
#401147 2200 Series - M.W. Timber Tantrum
1400 SERIES BOAT BLIND
Fits boats 14’ to 15’ long.
Top Beam width 47” to 59”.
Three closable shooting holes.
#400037 - Realtree Max-4
#401144 - Muddy Water Timber Tantrum
1600 SERIES BOAT BLIND
Fits boats 15’ to 17’ long.
Top Beam width 60” to 72”.
Three closable shooting holes.
#400043 - Realtree Max-4
#401145 - Muddy Water Timber Tantrum
1800 SERIES BOAT BLIND
Fits boats 17’ to 20’ long.
Top Beam width 72” to 86”.
Four closable shooting holes.
#400046 - Realtree Max-4
#401146 - Muddy Water Timber Tantrum
2200 SERIES BOAT BLIND
Fits boats 19’ to 23’ long.
Top Beam width 86” to 96”.
Five closable shooting holes.
#400053 - Realtree Max-4
#401147 - Muddy Water Timber Tantrum
FLIP-TOP BLIND FEATURES:
#401153 BOAT BLIND EXTENSION KIT
Extends the boat blind frame length
by 7 Inches to accommodate varied
seating situations. Kit includes
4 Extension poles + hardware.
FLIP-TOP BLIND
Series Boat Blind
and
Beavertail Boat
Not Included
Mounts On Top Of Existing Beavertail 1400/1600/1800 Series Boat Blinds
600 Denier Polyester Shell Provides Concealment & Protection From Elements
Light-Weight, Powder-Coated Modified Square Aluminum Frame
Sewn-On Vegetation Straps For Complete Camouflage
Quick Attach / Detach
Can Be Broken Down For Easy Storage / Transport
AVAILABLE FLIP-TOP BLINDS:
Adjustable Height From 16 - 24 Inches
8 Feet x 9 Inch Frame Length (1400 / 1600)
#400038 1400 Flip-Top - Realtree Max-4 (Fits Beavertail 1400 & 1600 Series Boat Blinds)
11 Feet x 8 Inch Frame Length (1800)
#400047 1800 Flip-Top - Realtree Max-4 (Fits Beavertail 1800 Series Boat Blind)
™
10
™
MOTOR SPECS
BEAVERTAIL SURFACE DRIVE MOTORS
ENGINE:
DRIVE TRAIN
FRAME
PROP
FINISH
WGT
TRAILERING
35 HP VANGUARD MARINE
V-Twin 90* Overhead Valve Design
Digital CDI Ignition
20 Amp Alternator
4350 Rev-Limiter
Lighter Flywheel
High Capacity Fuel Pump
Stainless Steel Muffler
Commercial Quality Components
4200 RPM
3-Yr Engine Warranty
Synchronous Belt Drive
Electric Clutch
Polished Ground Balanced
Electroless Plated Drive Shaft
Aircraft Grade Aluminum
Frame and Housing
High Performance
12”x 10” 2 Blade
Stainless Steel
Flat Marine Khaki
Powder Coat
Zinc Rich Undercoat
Primer Powder Coat
262 LBS
(Approx.)
CMC Tilt and Trim
Hydrolic Actuator
37 HP VANGUARD EFI
V-Twin 90* Overhead Valve Design
Electronic Fuel Injection
993 CC
20/50 Amp Alternator
4750 Rev Limiter
Electric Fuel Pump
Stainless Steel Muffler
Full Pressure Lubrication System
12 Volt Electric Start
Commercial Quality Components
3-Yr Engine Warranty
Synchronous Belt Drive
Electric Clutch
Polished Ground Balanced
Electroless Plated Drive Shaft
Aircraft Grade Aluminum
Frame and Housing
High Performance
12”x 10” 2 Blade
Stainless Steel
Flat Marine Khaki
Powder Coat
Zinc Rich Undercoat
Primer Powder Coat
262 LBS
(Approx.)
CMC Tilt and Trim
Hydrolic Actuator
BEAVERTAIL LONG TAIL MOTORS
ENGINE:
DRIVE TRAIN
FRAME
PROP
FINISH
WGT
TRAILERING
37 HP VANGUARD EFI
V-Twin 90* Overhead Valve Design
Electronic Fuel Injection
993 CC
20/50 Amp Alternator
4750 Rev Limiter
High Capacity Electric Fuel Pump
Stainless Steel Muffler
Full Pressure Lubrication System
12 Volt Electric Start
Commercial Quality Components
3-Yr Engine Warranty
Patent Pending, Stainless Steel
Removable Bearing Assemblies;
Upper & Lower Stainless
Removable Caps & Housings
Polished, Ground Balanced &
Electroless Nickel-Plated Drive Shaft
Uni-Seamless, Robotics
Welded Steel Frame
All FrameParts CNC Milled
& Laser Cut For Alignment
Accuracy
Performance Series Prop;
Stainless Steel with Cad/Cam
Computer Technology For
Precision Accuracy; Super
Weedless, Heavy Cupped
Flat Marine Olive Drab
Powder Coat
Zinc Rich Undercoat
Primer Powder Coat
225 LBS
(Approx.)
Tailshaft Swings Into Boat
Exclusive 360 Degree Swivel
W/True Safety Stop Spring Pin
Rubber-Mounted Adjustment
Bolts For Motor Trimming
Capabilities
35 HP VANGUARD MARINE
V-Twin 90* Overhead Valve Design
Digital CDI Ignition
20 Amp Alternator
4350 Rev-Limiter
Lighter Flywheel
High Capacity Fuel Pump
Stainless Steel Muffler
Commercial Quality Components
4200 RPM
3-Yr Engine Warranty
Patent Pending, Stainless Steel
Removable Bearing Assemblies;
Upper & Lower Stainless
Removable Caps & Housings
Polished, Ground Balanced &
Electroless Nickel-Plated Drive Shaft
Uni-Seamless, Robotics
Welded Steel Frame
All FrameParts CNC Milled
& Laser Cut For Alignment
Accuracy
Performance Series Prop;
Stainless Steel with Cad/Cam
Computer Technology For
Precision Accuracy; Super
Weedless, Heavy Cupped
Flat Marine Olive Drab
Powder Coat
Zinc Rich Undercoat
Primer Powder Coat
220 LBS
(Approx.)
Tailshaft Swings Into Boat
Exclusive 360 Degree Swivel
W/True Safety Stop Spring Pin
Rubber-Mounted Adjustment
Bolts For Motor Trimming
Capabilities
26.5 HP KOHLER EFI
V-Twin EFI
12 Volt Electric Start
20 Amp Alternator
26.5 HP@3600 RPM
Patent Pending, Stainless Steel
Removable Bearing Assemblies;
Upper & Lower Stainless
Removable Caps & Housings
Polished, Ground Balanced &
Electroless Nickel-Plated Drive Shaft
Uni-Seamless, Robotics
Welded Steel Frame
All FrameParts CNC Milled
& Laser Cut For Alignment
Accuracy
Performance Series Prop;
Stainless Steel with Cad/Cam
Computer Technology For
Precision Accuracy; Super
Weedless, Heavy Cupped
Flat Marine Olive Drab
Powder Coat
Zinc Rich Undercoat
Primer Powder Coat
174 LBS
(Approx.)
Tailshaft Swings Into Boat
Exclusive 360 Degree Swivel
W/True Safety Stop Spring Pin
Rubber-Mounted Adjustment
Bolts For Motor Trimming
Capabilities
23 HP VANGUARD MARINE
V-Twin
Electric Start/Backup Pull Start
627 CC
Two Cylinders
Patent Pending, Stainless Steel
Removable Bearing Assemblies;
Upper & Lower Stainless
Removable Caps & Housings
Polished, Ground Balanced &
Electroless Nickel-Plated Drive Shaft
Uni-Seamless, Robotics
Welded Steel Frame
All FrameParts CNC Milled
& Laser Cut For Alignment
Accuracy
Performance Series Prop;
Stainless Steel with Cad/Cam
Computer Technology For
Precision Accuracy; Super
Weedless, Heavy Cupped
Flat Marine Olive Drab
Powder Coat
Zinc Rich Undercoat
Primer Powder Coat
150 LBS
(Approx.)
Tailshaft Swings Into Boat
Exclusive 360 Degree Swivel
W/True Safety Stop Spring Pin
Rubber-Mounted Adjustment
Bolts For Motor Trimming
Capabilities
13 HP VANGUARD MARINE
V-Twin
Electric Start/Backup Pull Start
479 CC
16 Amp Alternator
Patent Pending, Stainless Steel
Removable Bearing Assemblies;
Upper & Lower Stainless
Removable Caps & Housings
Polished, Ground Balanced &
Electroless Nickel-Plated Drive Shaft
Uni-Seamless, Robotics
Welded Steel Frame
All FrameParts CNC Milled
& Laser Cut For Alignment
Accuracy
Performance Series Prop;
Stainless Steel with Cad/Cam
Computer Technology For
Precision Accuracy; Super
Weedless, Heavy Cupped
Flat Marine Olive Drab
Powder Coat
Zinc Rich Undercoat
Primer Powder Coat
145 LBS
(Approx.)
Tailshaft Swings Into Boat
Exclusive 360 Degree Swivel
W/True Safety Stop Spring Pin
Rubber-Mounted Adjustment
Bolts For Motor Trimming
Capabilities
6.5 HP VANGUARD
Electric Start/Backup Pull Start
205 cc
Single Cylinder
Patent Pending, Stainless Steel
Removable Bearing Assemblies;
Upper & Lower Stainless
Removable Caps & Housings
Polished, Ground Balanced &
Electroless Nickel-Plated Drive Shaft
Uni-Seamless, Robotics
Welded Steel Frame
All FrameParts CNC Milled
& Laser Cut For Alignment
Accuracy
Performance Series Prop;
Stainless Steel with Cad/Cam
Computer Technology For
Precision Accuracy; Super
Weedless, Heavy Cupped
Flat Marine Olive Drab
Powder Coat
Zinc Rich Undercoat
Primer Powder Coat
70 LBS
(Approx.)
Tailshaft Swings Into Boat
Exclusive 360 Degree Swivel
W/True Safety Stop Spring Pin
Rubber-Mounted Adjustment
Bolts For Motor Trimming
Capabilities
Beavertail . 411 West Congress St., Maple Lake, MN 55358
Toll Free: 877-466-8837
www.explorebeavertail.com