Countersinks - Engman Taylor

Countersinks
Including
Uniflute
The original
single flute
countersink
Designed
and
Manufactured
in the USA
M.A.
F
ORD
High Performance Cutting Tools
Countersinks
Designed
and
Manufactured
in the USA
Pilots
Micro-Stops
Countersinks
Table of Contents
Series
Introduction
60
61
61B
61T
61 Set
62
65
66
67
78
79
79B
79T
79 Set
92
92 Set
83
83TC
84
84TC
86
87
850
851
852
80
Technical
Page
1
2
2
3
4
5
5
6
6
7
7
8
9
10
11
11-12
12
13
13
14
14
15
15
16
16
16
17
18
Description
Carbide Uniflute®
HSS Uniflute®
HSS Uniflute® ALtima® Blaze coated
HSS Uniflute® TiN coated
HSS Uniflute® Sets
Hi-Alloy HSS Uniflute®
Unicam Resharpening Fixture
HSS Tri-flute
HSS Single Cutting Edge
Chatterless Carbide, Six Flute
Chatterless HSS, Six Flute
Chatterless HSS, Six Flute, ALtima® Blaze coated
Chatterless HSS, Six Flute, TiN coated
Chatterless HSS, Six Flute Sets
Aircraft HSS, Three Flute
Aircraft HSS, Three Flute Sets
HSS Micro-Stop, Two Flute, Threaded Shank, Integral Pilot
Carbide Micro-Stop, Two Flute, Threaded Shank, Integral Pilot
HSS Micro-Stop, Two Flute, Threaded Shank, Inserted pilot
Carbide Micro-Stop, Two Flute, Threaded Shank, Inserted Pilot
HSS Micro-Stop, Three Flute, Threaded Shank, Integral Pilot
HSS Micro-Stop, Three Flute, Threaded Shank, Inserted Pilot
.086" Shank Countersink Pilot
.093" Shank Countersink Pilot
.170" Shank Countersink Pilot
Micro-Stop Fixtures/Non Marking Pads
®
All M.A. Ford products are
manufactured in dedicated cells
that combine the latest production
technology with experienced
machinists and operators. Our
Countersink Teams apply decades
of experience to making our famous
®
Uniflute Countersink, as well as
our complete family of 2, 3, and 6
flute countersinks.
Countersinks
For Machine or Hand
Countersinking
The Original Countersink
from M.A. Ford®
NEW
Coated Countersinks
M.A. Ford® provides one of the most
complete lines of high-speed steel and
carbide countersinks. Tools are available in
a variety of flute designs for countersinking
virtually any material by machine or by
hand.
ALtima® Blaze
Heat Treated Countersinks
Deliver Increased Productivity
and Tool Life
All M.A. Ford® HSS countersinks are heat
treated in an electronically controlled
vacuum furnace. This assures precise
hardening and eliminates the possibility of
decarburization. All heat treating is done in
our own facilities for maximum control and
assurance of desired hardness and
toughness.
Most M.A. Ford® HSS countersinks receive
an additional heat treat process known as
the Steam Homogeneous Process. This
process is like a final tempering, relieving
internal grinding stresses. The result is a
much tougher cutting edge that stays
sharper, longer. Additionally, the Steam
Homogeneous Process provides a tough,
hard, porous oxide film on the tool that is
sufficient enough to retain cutting oil,
further reducing frictional heat and
extending tool life.
TiN coating
See pages 3-4 and 9-10 for coated
countersinks
Coating Properties
M ic ro Hardnes s
(HV )
M ax . W ork ing
Tem perature
Color
TiN
A Ltim a ®
B laz e
2300
3200
600°C
1112°F
G old
1100°C
2012°F
B lue G ray
®
ALtima Blaze
features high temperature hardness and
oxidation resistance that provides extreme wear
resistance under all machining conditions.
TiN
Designed
and
Manufactured
in the USA
provides a higher surface hardness and
increased lubricity over an uncoated tool.
Factory Regrinding Service Available.
Call Customer Service for Details.
1
M.A. Ford® phone: 800-553-8024 or 563-391-6220.
For Product Information, contact your local distributor.
Z=1
60°
82°
90°
100°
Recommended for use on abrasive, nonmetallic and non-ferrous materials.
D1
D3
• Easily resharpened.
• Can be used on hardened steel and work
hardening alloys.
• Rigid set-ups and good machinery maintenance
are a must.
• Not recommended for use in hand-held tools.
60°
Tool No.
60012501
60018701
60025001
60037501
60050001
60075001
60100001
EDP
60001
60021
60041
60061
60081
60101
60121
82°
Tool No.
60012502
60018702
60025002
60037502
60050002
60075002
60100002
EDP
60006
60026
60046
60066
60086
60106
60126
Series 60 & 61
C
90°
Tool No.
60012503
60018703
60025003
60037503
60050003
60075003
60100003
EDP
60011
60031
60051
60071
60091
60111
60131
Countersinks
®
Uniflute
Series 60
D2
L1
Included Angle
+ 0.5°
Diameter
100°
Diam
e te r Shank Non-Cutting OD OAL
Tool No. EDP
D1
D2
D3 M ax.
L1
60012504 60016
1/8
1/8
.030*
1-1/2
60018704 60036
3/16
3/16
.045
1-1/2
60025004 60056
1/4
1/4
.045
2
60037504 60076
3/8
1/4
.060
2
60050004 60096
1/2
1/4
.060
2-3/8
60075004 60116
3/4
1/2
.120
3
60100004 60136
1
1/2
.120
3
*60° - .015 max.
Standard angles may be modified from 55° to 120°.
HSS Uniflute® HSS Z=1
Series 61
60°
82°
90°
100°
120°
This is the original single flute countersink
designed for general purpose countersinking,
chamfering or deburring.
• Self piloting and completely chatterless.
• No secondary burs formed.
• Each size may be used on a wide range of hole
diameters.
• Use on machine tool or in hand-held tool
applications.
• Easily resharpened.
• Steam homogeneous surface treatment
(blackening) to prolong tool life and prevent galling.
60°
Tool No.
61012501
61018701
61025001
61037501
61050001
61062501
61075001
61100001
61125001
61150001
61200001
61250001
61300001
EDP
61001
61026
61051
61076
61101
61126
61151
61176
61201
61216
61231
61246
61261
82°
Tool No.
61012502
61018702
61025002
61037502
61050002
61062502
61075002
61100002
61125002
61150002
61200002
61250002
61300002
EDP
61006
61031
61056
61081
61106
61131
61156
61181
61206
61221
61236
61251
61266
90°
Tool No.
61012503
61018703
61025003
61037503
61050003
61062503
61075003
61100003
61125003
61150003
61200003
61250003
61300003
EDP
61011
61036
61061
61086
61111
61136
61161
61186
61211
61226
61241
61256
61271
D1
D3
D2
L1
Included Angle
+ 0.5°
100°
Tool No. EDP
61012504 61016
61018704 61041
61025004 61066
61037504 61091
61050004 61116
61062504 61141
61075004 61166
61100004 61191
120°
Tool No. EDP
61012506 61021
61018706 61046
61025006 61071
61037506 61096
61050006 61121
61062506 61146
61075006 61171
61100006 61196
Diameter
D1
1/8
3/16
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
2-1/2
3
Shank
D2
1/8
3/16
1/4
1/4
1/4
1/4
1/2
1/2
1/2*
3/4*
3/4*
3/4*
3/4*
Non-Cutting OD
D3 Max.
.030
.045
.045
.060
.060
.060
.120
.120
.120
.250
.500
.750
1.000
OAL
L1
1-1/2
1-1/2
2
2
2
2-1/4
2-3/4
2-3/4
3
3-1/2
3-3/4
5
5-1/4
*Straight shank with tang drive.
Standard angles may be modified from 55° to 119°.
M.A. Ford® fax: 800-892-9522 or 563-386-7660
www.maford.com
[email protected]
2
Coated Countersinks
Series 61B
®
ALtima
Countersinks
®
HSS Uniflute
Series 61B
HSS
ALtima®
Blaze
60°
82°
90°
100°
120°
Z=1
This is the original single flute countersink
designed for general purpose countersinking,
chamfering or deburring.
D1
• Self piloting and completely chatterless.
• No secondary burs formed.
• Each size may be used on a wide range of hole
diameters.
• Use on machine tool or in hand-held tool
applications.
• Easily resharpened.
• ALtima® Blaze for extreme wear resistance under
all machining conditions.
60°
82°
90°
D3
D2
L1
Included Angle
+ 0.5°
Diameter
Shank
Non-Cutting
OD
OAL
D1
1/8
D2
1/8
D3 Max.
.030
L1
1-1/2
3/16
3/16
.045
1-1/2
1/4
1/4
.045
2
3/8
1/4
.060
2
1/2
1/4
.060
2
5/8
1/4
.060
2-1/4
3/4
1/2
.120
2-3/4
1
1/2
.120
2-3/4
Tool No.
EDP
Tool No.
EDP
Tool No.
EDP
61B012501 61003 61B012502 61008 61B012503 61013
61B018701 61028 61B018702 61033 61B018703 61038
61B025001 61053 61B025002 61058 61B025003 61063
61B037501 61078 61B037502 61083 61B037503 61088
61B050001 61103 61B050002 61108 61B050003 61113
6B1062501 61128 61B062502 61133 61B062503 61138
6B1075001 61153 61B075002 61158 61B075003 61163
61B100001 61178 61B100002 61183 61B100003 61188
Diameter
Shank
Non-Cutting
OD
OAL
D1
1/8
D2
1/8
D3 Max.
.030
L1
1-1/2
3/16
3/16
.045
1-1/2
1/4
1/4
.045
2
61B037504 61093 61B037506 61098
61B050004 61118 61B050006 61123
61B062504 61143 61B062506 61148
3/8
1/4
.060
2
1/2
1/4
.060
2
5/8
1/4
.060
2-1/4
61B075004 61168 61B075006 61173
61B100004 61193 61B100006 61198
3/4
1/2
.120
2-3/4
1
1/2
.120
2-3/4
100°
120°
Tool No.
EDP
Tool No.
EDP
61B012504 61018 61B012506 61023
61B018704 61043 61B018706 61048
61B025004 61068 61B025006 61073
Angles modified from 55° to 119° available as a special.
Contact customer service for details.
Coating Properties
M ic ro H a rd n e s s
(H V )
M a x . W o rk in g
Te m p e ra t u re
C o lo r
3
M.A. Ford® phone: 800-553-8024 or 563-391-6220.
TiN
A L t im a ®
B la z e
2300
3200
6 0 0 °C
1 1 1 2 °F
G o ld
1 1 0 0 °C
2 0 1 2 °F
B lu e G ra y
For Product Information, contact your local distributor.
HSS
60°
82°
90°
100°
120°
Z=1
TiN
Series 61T
TiN
®
HSS Uniflute
Series 61T
• Self piloting and completely chatterless.
• No secondary burs formed.
• Each size may be used on a wide range of hole
diameters.
• Use on machine tool or in hand-held tool
applications.
• Easily resharpened.
• TiN coating for higher surface hardness and
increased lubricity.
60°
Tool No.
61T012501
61T018701
61T025001
61T037501
61T050001
61T062501
61T075001
61T100001
82°
Tool No.
61T012502
61T018702
61T025002
61T037502
61T050002
61T062502
61T075002
61T100002
EDP
61007
61032
61057
61082
61107
61132
61157
61182
D1
D3
D2
L1
Included Angle
+ 0.5°
Diameter
Shank
Non-Cutting
OD
OAL
D1
1/8
3/16
1/4
3/8
1/2
5/8
3/4
1
D2
1/8
3/16
1/4
1/4
1/4
1/4
1/2
1/2
D3 Max.
.030
.045
.045
.060
.060
.060
.120
.120
L1
1-1/2
1-1/2
2
2
2
2-1/4
2-3/4
2-3/4
Tool No.
61T012503
61T018703
61T025003
61T037503
61T050003
61T062503
61T075003
61T100003
EDP
61012
61037
61062
61087
61112
61137
61162
61187
Diameter
Shank
Non-Cutting
OD
OAL
D1
1/8
D2
1/8
D3 Max.
.030
L1
1-1/2
3/16
3/16
.045
1-1/2
1/4
1/4
.045
2
61T037504 61092 61T037506 61097
61T050004 61117 61T050006 61122
61T062504 61142 61T062506 61147
3/8
1/4
.060
2
1/2
1/4
.060
2
5/8
1/4
.060
2-1/4
61T075004 61167 61T075006 61172
61T100004 61192 61T100006 61197
3/4
1/2
.120
2-3/4
1
1/2
.120
2-3/4
100°
EDP
61002
61027
61052
61077
61102
61127
61152
61177
90°
120°
Tool No.
EDP
Tool No.
EDP
61T012504 61017 61T012506 61022
61T018704 61042 61T018706 61047
61T025004 61067 61T025006 61072
Coated Countersinks
This is the original single flute countersink
designed for general purpose countersinking,
chamfering or deburring.
Modified angles from 55° to 119° available as a special.
Contact customer service for details.
M.A. Ford® fax: 800-892-9522 or 563-386-7660
www.maford.com
[email protected]
4
Countersinks
Series 61 & 62
Countersinks
®
Uniflute
HSS Z=1
Series 61 Sets
60°
82°
90°
100°
120°
Set of four Series 61 Uniflute® countersinks
includes 1/4”, 1/2”, 3/4” and 1” diameter tools.
Sets are available with 60°, 82°, 90°, 100° or
120° included angles. Tools are packaged in
plastic cases.
4 Piece
Set No.
64100001
64100002
64100003
64100004
64100006
EDP
64001
64006
64011
64016
64021
Uniflute®
Series 62
®
Set of seven Series 61 Uniflute countersinks
includes 3/16”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4” and 1”
diameter tools. Sets are available with 60°, 82°,
90°, 100° or 120° included angles. Tools are
packaged in plastic cases.
7 Piece
Set No.
64100071
64100072
64100073
64100074
64100076
Included
Angle
60°
82°
90°
100°
120°
HI Alloy
HSS
Z=1
EDP
64003
64008
64013
64018
64023
Included
Angle
60°
82°
90°
100°
120°
60°
82°
90°
Manufactured from a high alloy steel for machining
stainless steel and high temperature alloys.
• Fewer tool changes on long run production jobs.
• Easily resharpened.
• Steam homogeneous surface treatment (blackening)
to prolong tool life and
prevent galling.
D1
D3
D2
L1
Included
Angle +0.5°
60°
Tool No.
62025001
62050001
62075001
62100001
EDP
62001
62016
62031
62046
82°
Tool No.
62025002
62050002
62075002
62100002
EDP
62006
62021
62036
62051
90°
Tool No.
62025003
62050003
62075003
62100003
EDP
62011
62026
62041
62056
Diameter
D1
1/4
1/2
3/4
1
Shank
D2
1/4
1/4
1/2
1/2
Non-Cutting OD
D3 Max.
.045
.060
.120
.120
OAL
L1
2
2
2-3/4
2-3/4
Standard angles may be modified from 55° to 120°.
Factory Regrinding Service Available.
Call Customer Service for Details.
5
M.A. Ford® phone: 800-553-8024 or 563-391-6220.
For Product Information, contact your local distributor.
Series 65 & 66
Unicam
Series 65
Resharpening Fixture
Countersinks
The Unicam Resharpening Fixture is designed
to resharpen Uniflute® countersinks. The unique
cam relief is quickly and easily reground on dull
tools, greatly extending tool life.
• Can be used on a tool and cutter grinder,
surface grinder or a pedestal grinder.
• Resharpens tools with 1/4”, 1/2” or 3/4”
shanks.
• Packaged in plastic case.
• Includes detailed instructions on set-up and
operation.
• Not recommended for 2-1/2” or 3” tools.
Unicam Resharpening Fixture
Tool No.
EDP
65000000
65001
Tri-flute
Series 66
HSS Z=3
60°
82°
90°
Designed for general purpose machining at
higher feed rates than are possible with the
Uniflute® design.
D1
D3
• Cam relief geometry allows machining at greater
feed rates.
• Steam homogeneous surface treatment
(blackening) to prolong tool life and
prevent galling.
D2
L1
Included Angle
+ 0.5°
60°
Tool No.
66025001
66037501
66050001
66062501
66075001
66100001
66125001
66150001
EDP
66001
66016
66031
66046
66061
66076
66091
66106
82°
Tool No.
66025002
66037502
66050002
66062502
66075002
66100002
66125002
66150002
EDP
66006
66021
66036
66051
66066
66081
66096
66111
90°
Tool No.
66025003
66037503
66050003
66062503
66075003
66100003
66125003
66150003
EDP
66011
66026
66041
66056
66071
66086
66101
66116
Diameter
D1
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
Shank
D2
1/4
1/4
1/4
1/4
1/2
1/2
1/2*
3/4*
Non-Cutting OD
D3 Max.
0.06
0.09
0.15
0.18
0.21
0.25
0.37
0.50
OAL
L1
2
2
2
2-1/4
2-3/4
2-3/4
3
3-1/2
*Straight Shank with tang drive.
Standard angles may be modified from 55° to 120°.
M.A. Ford® fax: 800-892-9522 or 563-386-7660
www.maford.com
[email protected]
6
Countersinks
Series 67 & 78
Countersinks
Single Cutting Edge HSS Z=1
Series 67
60°
82°
90°
D1
Designed for general purpose countersinking,
chamfering or deburring.
Min.
D2
• Efficient stock removal, chatter-free finish.
• 3/16” and 1/4” tools are double ended.
• Bright finish helps reduce chip build-up on
cutting edge.
60o
Tool No.
67018701
67025001
67043701
67056201
67081201
67112501
67150001
EDP
67001
67016
67031
67046
67061
67076
67091
82o
Tool No.
67018702
67025002
67043702
67056202
67081202
67112502
67150002
EDP
67006
67021
67036
67051
67066
67081
67096
90o
Tool No.
67018703
67025003
67043703
67056203
67081203
67112503
67150003
D 3 Max.
D3
L1
Included
Angle +0.5°
100o
Tool No.
EDP
EDP
67011
67026
67041
67056
67071
67086
67101 *67150004 67103
Diameter
D1
3/16
1/4
7/16
9/16
13/16
1-1/8
1-1/2
Shank
Non-Cutting OD
D2
D3 Min.** D3 Max.
3/16
.06
.17
1/4
.09
.23
1/4
.15
.40
1/4
.19
.53
1/2
.25
.78
1/2
.44
1.03
1/2
.50
1.46
OAL
L1
1-1/2
2
2
2
2-5/8
2-7/8
3-1/2
*Contact customer service for availability.
**15% to 30% greater for 60° countersinks only.
Chatterless
Six Flute
Series 78
C
Z=6
60°
82°
90°
100°
120°
Solid Carbide construction (steel shanks on tools
3/8” diameter and larger) makes this countersink
ideal for hardened steel, high temperature alloys
and other tough jobs.
D1
D3
D2
• Rigid set-ups and good machine tool maintenance
are a must.
• Not recommended for hand-held applications.
60°
Tool No.
78012501
78018701
78025001
78037501
78050001
78062501
78075001
78100001
78125001
78150001
EDP
78001
78026
78051
78076
78101
78126
78151
78176
78201
78216
82°
Tool No.
78012502
78018702
78025002
78037502
78050002
78062502
78075002
78100002
78125002
78150002
EDP
78006
78031
78056
78081
78106
78131
78156
78181
78206
78221
90°
Tool No.
78012503
78018703
78025003
78037503
78050003
78062503
78075003
78100003
78125003
78150003
EDP
78011
78036
78061
78086
78111
78136
78161
78186
78211
78226
L1
Included
Angle +0.5°
100°
Tool No. EDP
78012504 78016
78018704 78041
78025004 78066
78037504 78091
78050004 78116
78062504 78141
78075004 78166
78100004 78191
120°
Diameter Shank
Tool No. EDP
D1
D2
78012506 78021
1/8
1/8
78018706 78046
3/16
3/16
78025006 78071
1/4
1/4
78037506 78096
3/8
1/4
78050006 78121
1/2
3/8
78062506 78146
5/8
3/8
78075006 78171
3/4
1/2
78100006 78196
1
1/2
1-1/4
1/2*
1-1/2
3/4*
Non-Cutting
OD
D3 Max.
0.03
0.04
0.06
0.09
0.15
0.18
0.21
0.25
0.37
0.43
*Straight shank with tang drive.
Customer Service
800-553-8024
7
M.A. Ford® phone: 800-553-8024 or 563-391-6220.
For Product Information, contact your local distributor.
OAL
L1
1-1/2
1-1/2
2
2
2-1/8
2-3/8
2-3/4
2-3/4
3
3-1/2
Series 79
HSS Z=6
60°
82°
90°
100°
120°
Standard six flute countersinks are designed for
economical, general purpose countersinking,
chamfering or deburring. Because of the
multiple flute design, chip loads are generally
smaller. Even at maximum speeds, chatter-free
machining is possible. Steam homogeneous
surface treatment (blackening) is used to
prolong tool life and prevent galling.
60°
Tool No.
79012501
79018701
79025001
79031201
79037501
79050001
79062501
79075001
79087501
79100001
79125001
79150001
79200001
79250001
79300001
EDP
79021
79046
79071
79096
79121
79146
79171
79196
79221
79246
79271
79296
79321
79346
79361
100°
Tool No. EDP
79012504 79036
79018704 79061
79025004 79086
79031204 79111
79037504 79136
79050004 79161
79062504 79186
79075004 79211
79087504 79236
79100004 79261
79125004 79286
79150004 79311
79200004 79336
82°
Tool No.
79012502
79018702
79025002
79031202
79037502
79050002
79062502
79075002
79087502
79100002
79125002
79150002
79200002
79250002
79300002
90°
Tool No.
79012503
79018703
79025003
79031203
79037503
79050003
79062503
79075003
79087503
79100003
79125003
79150003
79200003
79250003
79300003
D1
D3
Included
Angle +0.5°
D2
L1
EDP
79031
79056
79081
79106
79131
79156
79181
79206
79231
79256
79281
79306
79331
79356
79371
Diameter
D1
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
2-1/2
3
Shank
D2
1/8
3/16
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
1/2**
3/4**
3/4**
3/4**
3/4**
Non-Cutting OD
D3 Max.
0.03
0.04
0.06
0.08
0.09
0.15
0.18
0.21
0.23
0.25
0.37
0.43
0.62
0.75
1
OAL
L1
1-1/2
1-1/2
2
2
2
2
2-1/4
2-3/4
2-3/4
2-3/4
3
3-1/2
3-3/4
5
5-1/4
110°
120°
Tool No.
EDP Tool No. EDP
*79012505 79038 79012506 79041
79018706 79066
*79025005 79088 79025006 79091
*79031205 79113 79031206 79116
*79037505 79138 79037506 79141
79050006 79166
79062506 79191
79075006 79216
79087506 79241
*79100005 79263 79100006 79266
*79125005 79288 79125006 79291
*79150005 79313 79150006 79316
79200006 79341
Diameter
D1
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
Shank
D2
1/8
3/16
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
1/2**
3/4**
3/4**
Non-Cutting OD
D3 Max.
0.03
0.04
0.06
0.08
0.09
0.15
0.18
0.21
0.23
0.25
0.37
0.43
0.62
OAL
L1
1-1/2
1-1/2
2
2
2
2
2-1/4
2-3/4
2-3/4
2-3/4
3
3-1/2
3-3/4
EDP
79026
79051
79076
79101
79126
79151
79176
79201
79226
79251
79276
79301
79326
79351
79366
Countersinks
Chatterless
Six Flute
Series 79
*Call customer service for availability.
**Straight shank with tang drive.
Factory Regrinding Service Available.
Call Customer Service for Details.
M.A. Ford® fax: 800-892-9522 or 563-386-7660
www.maford.com
[email protected]
8
Coated Countersinks
Series 79B
®
ALtima
Countersinks
Chatterless
Six Flute
Series 79B
HSS
ALtima®
Blaze
60°
82°
90°
100°
120°
Z=6
Standard six flute countersinks are designed for
economical, general purpose countersinking, chamfering
or deburring. Because of the multiple flute design, chip
loads are generally smaller. Even at maximum speeds,
chatter-free machining is possible.
D1
D3
D2
L1
ALtima® Blaze for extreme wear resistance
under all machining conditions.
Included Angle
+ 0.5°
60°
Tool No.
79B012501
79B018701
79B025001
79B037501
79B050001
79B062501
79B075001
79B100001
100°
Tool No.
79B012504
79B018704
79B025004
79B037504
79B050004
79B062504
79B075004
79B100004
EDP
79023
79048
79073
79123
79148
79173
79198
79248
82°
Tool No.
79B012502
79B018702
79B025002
79B037502
79B050002
79B062502
79B075002
79B100002
EDP
79038
79063
79088
79138
79163
79188
79213
79263
120°
Tool No.
79B012506
79B018706
79B025006
79B037506
79B050006
79B062506
79B075006
79B100006
EDP
79028
79053
79078
79128
79153
79178
79203
79253
EDP
79043
79068
79093
79143
79168
79193
79218
79268
90°
Tool No.
79B012503
79B018703
79B025003
79B037503
79B050003
79B062503
79B075003
79B100003
EDP
79033
79058
79083
79133
79158
79183
79208
79258
Diameter
D1
1/8
3/16
1/4
3/8
1/2
5/8
3/4
1
Shank
D2
1/8
3/16
1/4
1/4
3/8
3/8
1/2
1/2
Diameter
D1
1/8
3/16
1/4
3/8
1/2
5/8
3/4
1
Shank
D2
1/8
3/16
1/4
1/4
3/8
3/8
1/2
1/2
Non-Cutting
OD
D3 Max.
0.03
0.04
0.06
0.09
0.15
0.18
0.21
0.25
Non-Cutting
OD
D3 Max.
0.03
0.04
0.06
0.09
0.15
0.18
0.21
0.25
OAL
L1
1-1/2
1-1/2
2
2
2
2-1/4
2-3/4
2-3/4
OAL
L1
1-1/2
1-1/2
2
2
2
2-1/4
2-3/4
2-3/4
Coating Properties
M ic ro H a rd n e s s
(H V )
M a x . W o rk in g
Te m p e ra t u re
C o lo r
9
M.A. Ford® phone: 800-553-8024 or 563-391-6220.
TiN
A L t im a ®
B la z e
2300
3200
6 0 0 °C
1 1 1 2 °F
G o ld
1 1 0 0 °C
2 0 1 2 °F
B lu e G ra y
For Product Information, contact your local distributor.
TiN
Series 79T
TiN
HSS
60°
82°
90°
100°
120°
Z=6
Standard six flute countersinks are designed for
economical, general purpose countersinking, chamfering or
deburring. Because of the multiple flute design, chip loads
are generally smaller. Even at maximum speeds, chatterfree machining is possible.
D1
D3
D2
L1
TiN coating for higher surface hardness and
increased lubricity.
60°
Tool No.
79T012501
79T018701
79T025001
79T037501
79T050001
79T062501
79T075001
79T100001
100°
Tool No.
79T012504
79T018704
79T025004
79T037504
79T050004
79T062504
79T075004
79T100004
EDP
79022
79047
79072
79122
79147
79172
79197
79247
82°
Tool No.
79T012502
79T018702
79T025002
79T037502
79T050002
79T062502
79T075002
79T100002
EDP
79037
79062
79087
79137
79162
79187
79212
79262
120°
Tool No.
79T012506
79T018706
79T025006
79T037506
79T050006
79T062506
79T075006
79T100006
EDP
79027
79052
79077
79127
79152
79177
79202
79252
EDP
79042
79067
79092
79142
79167
79192
79217
79267
90°
Tool No.
79T012503
79T018703
79T025003
79T037503
79T050003
79T062503
79T075003
79T100003
Diameter
D1
1/8
3/16
1/4
3/8
1/2
5/8
3/4
1
EDP
79032
79057
79082
79132
79157
79182
79207
79257
Shank
D2
1/8
3/16
1/4
1/4
3/8
3/8
1/2
1/2
Included Angle
+ 0.5°
Diameter
D1
1/8
3/16
1/4
3/8
1/2
5/8
3/4
1
Non-Cutting
OD
D3 Max.
0.03
0.04
0.06
0.09
0.15
0.18
0.21
0.25
M.A. Ford® fax: 800-892-9522 or 563-386-7660
Shank
D2
1/8
3/16
1/4
1/4
3/8
3/8
1/2
1/2
Non-Cutting
OD
D3 Max.
0.03
0.04
0.06
0.09
0.15
0.18
0.21
0.25
Coated Countersinks
Chatterless
Six Flute
Series 79T
OAL
L1
1-1/2
1-1/2
2
2
2
2-1/4
2-3/4
2-3/4
OAL
L1
1-1/2
1-1/2
2
2
2
2-1/4
2-3/4
2-3/4
www.maford.com
[email protected]
10
Countersinks
Series 79 & 92
Countersinks
Chatterless
Six Flute
Series 79 Sets
HSS Z=6
Z=6
60°
82°
90°
100°
Set of seven Series 79 countersinks include
1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 1” diameter
tools. Sets are available with 60°, 82°, 90° or
100° included angles. Tools are packaged in
plastic cases.
Set of four Series 79 countersinks include
1/4”,1/2”, 3/4” and 1” diameter tools. Sets are
available with 60°, 82°, 90° or 100° included
angles. Tools are packaged in plastic cases.
4 Piece
Set No.
79000011
79000012
79000013
79000014
Aircraft
Series 92
Included
Angle
60°
82°
90°
100°
EDP
79003
79008
79013
79019
7 Piece
Set No.
79000001
79000002
79000003
79000004
HSS Z=3
60°
82°
90°
100°
120°
Designed for countersinking, chamfering and
deburring aircraft type metals.
D1
• Bright finish helps reduce chip build-up on the cutting
edge.
• Spiral flute geometry for a clean, chatterless finish.
• Each size may be used on a wide range of hole
diameters.
60°
Tool No.
92025001
92037501
92050001
92062501
92075001
92087501
92100001
92112501
92125001
92150001
92200001
EDP
94101
94113
94125
94137
94149
94161
94173
94185
94197
94209
94221
82°
Tool No.
92025002
92037502
92050002
92062502
92075002
92087502
92100002
92112502
92125002
92150002
92200002
EDP
94103
94115
94127
94139
94151
94163
94175
94187
94199
94211
94223
Included
Angle
60°
82°
90°
100°
EDP
79001
79006
79011
79016
90°
Tool No.
92025003
92037503
92050003
92062503
92075003
92087503
92100003
92112503
92125003
92150003
92200003
EDP
94105
94117
94129
94141
94153
94165
94177
94189
94201
94213
94225
Diameter
D1
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
2
D3
D2
L1
Included
Angle +0.5°
Shank
D2
1/4
1/4
1/4
1/4
1/2
1/2
1/2
1/2
5/8
3/4
3/4
Non-Cutting OD
D3 Max.
0.07
0.11
0.15
0.19
0.23
0.26
0.30
0.34
0.38
0.45
0.60
OAL
L1
1-1/4
1-5/8
2
2-1/4
3
3
3-1/4
3-1/4
3-1/2
3-7/8
4-1/4
Standard angles may be modified from 55° to 119°.
11
M.A. Ford® phone: 800-553-8024 or 563-391-6220.
For Product Information, contact your local distributor.
Series 92
100°
Tool No. EDP
92025004 94107
92037504 94119
92050004 94131
92062504 94143
92075004 94155
92087504 94167
92100004 94179
92112504 94191
92125004 94203
92150004 94215
92200004 94227
110°
120°
Tool No. EDP Tool No. EDP
*92025005 94109 92025006 94111
*92037505 94121 92037506 94123
92050006 94135
92062506 94147
92075006 94159
*92087505 94169 92087506 94171
*92100005 94181 92100006 94183
92112506 94195
*92125005 94205 92125006 94207
92150006 94219
92200006 94231
Diameter
D1
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
2
Shank
D2
1/4
1/4
1/4
1/4
1/2
1/2
1/2
1/2
5/8
3/4
3/4
Non-Cutting OD
D3 Max.
0.07
0.11
0.15
0.19
0.23
0.26
0.30
0.34
0.38
0.45
0.60
OAL
L1
1-1/4
1-5/8
2
2-1/4
3
3
3-1/4
3-1/4
3-1/2
3-7/8
4-1/4
Countersinks
Series 92 Continued
*Call Customer Service for Availability.
Standard angles may be modified from 55° to 119°.
Aircraft Set
Series 92
HSS Z=3
60°
82°
90°
100°
120°
Set of five Series 92 countersinks include 1/4”,
3/8”, 1/2”, 5/8” and 3/4” diameter tools. Sets are
available with 60°, 82°, 90°, 100° or 120° included
angles. Tools are packaged in plastic cases.
5 Piece
Set No.
92000011
92000012
92000013
92000014
92000016
EDP
96380
96381
96382
96383
96385
Included
Angle
60°
82°
90°
100°
120°
Customer Service
800-553-8024
M.A. Ford® fax: 800-892-9522 or 563-386-7660
www.maford.com
[email protected]
12
Countersinks
Micro-Stops
Countersinks
Micro-Stop
Series 83
HSS Z=6
Z=2
60°
82°
90°
100°
120°
• Integral pilot size must be specified to any diameter within
the indicated range.
• May be ordered with a radius blend between the pilot and
countersink angle. Specify any radius between .020” and
.070”.
82°
Tool No.
*83D00002
83E00002
83F00002
83G00002
83H00002
*83J00002
*83K00002
*83N00002
*83P00002
90°
Tool No.
*83D00003
83E00003
83F00003
83G00003
83H00003
*83J00003
*83K00003
*83N00003
*83P00003
100°
Tool No.
*83D00004
83E00004
83F00004
83G00004
83H00004
*83J00004
*83K00004
*83N00004
*83P00004
120°
Tool No.
*83D00006
83E00006
83F00006
83G00006
83H00006
*83J00006
*83K00006
*83N00006
*83P00006
Diameter
D1
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
D2
Shank
D2
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
3/8-24
3/8-24
3/8-24
3/8-24
Pilot Size
Range
D3
1/16-1/8
1/16-3/16
3/32-3/16
3/32-1/4
5/32-3/8
3/16-3/8
3/16-1/2
3/16-1/2
1/4-5/16
D1
D3
+0.000
-0.001
D3
+0.000
-0.001
Included
Angle +0.5°
Standard angles may be modified from 78° to 119°.
* Call customer service for availability.
Micro-Stop
Series 83TC
HSS
C
Z=6
Z=2
60°
82°
90°
100°
120°
Solid carbide construction (steel shank) makes these tools
ideal for machining titanium, high temperature alloys,
hardened steel and many of the new composite materials.
D2
D1
• Integral pilot size must be specified to any diameter within
the indicated range.
82°
Tool No.
83E00002TC
83F00002TC
83G00002TC
83H00002TC
*83J00002TC
*83K00002TC
*83N00002TC
90°
Tool No.
83E00003TC
83F00003TC
83G00003TC
83H00003TC
*83J00003TC
*83K00003TC
*83N00003TC
100°
Tool No.
83E00004TC
83F00004TC
83G00004TC
83H00004TC
*83J00004TC
*83K00004TC
*83N00004TC
120°
Diameter
Tool No.
D1
83E00006TC
3/8
83F00006TC
7/16
83G00006TC
1/2
83H00006TC
5/8
*83J00006TC
3/4
*83K00006TC
7/8
*83N00006TC
1
Shank
D2
1/4-28
1/4-28
1/4-28
1/4-28
3/8-24
3/8-24
3/8-24
Pilot Size
Range
D3
3/32-3/16
3/32-3/16
3/32-1/4
1/8-3/8
5/32-3/8
3/16-1/2
3/16-3/8
Included
Angle +0.5°
* Call customer service for availability.
13
M.A. Ford® phone: 800-553-8024 or 563-391-6220.
For Product Information, contact your local distributor.
Included
Angle +0.5°
Use interchangeable steel pilots as shown on page 16.
82°
Tool No.
84375002
84437502
84500002
84625002
EDP
84049
84073
84097
84121
90°
Tool No.
84375003
84437503
84500003
84625003
EDP
84055
84079
84103
84127
100°
Tool No.
84375004
84437504
84500004
84625004
120°
Tool No.
84375006
84437506
84500006
84625006
*84750006
*84750006F
*84100004 84013 *84100006
*84100006F
*84112504 84037
*84112504F 84040 *'84112506F
EDP
84061
84085
84109
84133
*84100002 84001
*84100002F 84004
*84112502 84025
*84112502F 84028
*Call Customer Service for Availability.
Standard angles may be modified from 78° to 99°.
Micro-Stop
Series 84TC
HSS
C
Z=6
Z=2
EDP
84552
84576
84600
84624
90°
Tool No.
84375003TC
84437503TC
84500003TC
84625003TC
EDP
84558
84582
84606
84630
84046
Diameter
D1
3/8
7/16
1/2
5/8
3/4
3/4
1
1
1-1/8
1-1/8
100°
Tool No.
84375004TC
84437504TC
84500004TC
84625004TC
Shank
D2
1/4-28
1/4-28
1/4-28
1/4-28
3/8-24
7/16-20
3/8-24
7/16-20
3/8-24
7/16-20
Pilot
Series
850
850
850
851
852
852
852
852
852
852
D1
D2
60°
82°
90°
100°
120°
1
Included
Angle +0.5°
Solid carbide construction (steel shank) makes
these tools ideal for machining titanium, high
temperature alloys, hardened steel and many
of the new composite materials.
82°
Tool No.
84375002TC
84437502TC
84500002TC
84625002TC
EDP
84067
84091
84115
84139
84172
84175
84019
84022
Micro-Stops
HSS Z=6
Z=2
1
Countersinks
Micro-Stop
Series 84
D1
D2
60°
82°
90°
100°
120°
Use interchangeable steel pilots
as shown on pg 16.
EDP
84564
84588
84612
84636
120°
Tool No.
84375006TC
84437506TC
84500006TC
84625006TC
EDP
84570
84594
84618
84642
Diameter
D1
3/8
7/16
1/2
5/8
Shank
D2
1/4-28
1/4-28
1/4-28
1/4-28
Pilot
Series
850
850
850
851
Factory Regrinding Service Available.
Call Customer Service for Details.
Customer Service
800-553-8024
M.A. Ford® phone: 800-553-8024 or 563-391-6220.
For Product Information, contact your local distributor.
14
Micro-Stops
Countersinks
Micro-Stop
Series 86
60°
82°
90°
100°
120°
HSS Z=6
Z=3
D1
D2
D3
Countersinks
• Integral pilot size must be specified to any diameter
within the indicated range.
• May be ordered with a radius blend between the
pilot and countersink angle. Specify any radius
between .020” and .070”.
82°
Tool No.
86E00002
86F00002
86G00002
86H00002
*86J00002
*86K00002
*86N00002
*86P00002
90°
Tool No.
86E00003
86F00003
86G00003
86H00003
*86J00003
*86K00003
*86N00003
*86P00003
100°
Tool No.
86E00004
86F00004
86G00004
86H00004
*86J00004
*86K00004
*86N00004
*86P00004
120°
Tool No.
86E00006
86F00006
86G00006
86H00006
*86J00006
*86K00006
*86N00006
*86P00006
Diameter
D1
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
Shank
D2
1/4-28
1/4-28
1/4-28
1/4-28
3/8-24
3/8-24
3/8-24
3/8-24
+0.000
-0.001
Included
Angle +0.5°
Pilot Size
Range
D3
1/16-3/16
3/32-3/16
3/32-1/4
5/32-3/8
1/4-3/8
3/16-3/8
3/16-1/2
3/16-3/8
*Call Customer Service for Availability.
Standard angles may be modified from 78° to 119°.
Micro-Stop
Series 87
D2
60°
82°
90°
100°
120°
HSS Z=6
Z=3
D1
1
Included
Angle +0.5°
Use interchangeable steel pilots as shown on
page 16.
82°
Tool No.
87375002
87437502
87500002
87625002
*87750002F
120°
Tool No.
87375006
87437506
87500006
87625006
*87750006F
*87100004 87013 *87100006
*87100002F 87004 *87100003F 87010 *87100004F 87016 *87100006F
*87112502 87025 *87112503 87031 *87112504 87037 *87112506
EDP
87049
87061
87073
87085
87100
90°
Tool No.
87375003
87437503
87500003
87625003
EDP
87052
87064
87076
87088
100°
Tool No.
87375004
87437504
87500004
87625004
EDP
87055
87067
87079
87091
EDP
87058
87070
87082
87094
87118
87019
87022
87043
Diameter Shank
D1
D2
3/8
1/4-28
7/16
1/4-28
1/2
1/4-28
5/8
1/4-28
3/4
7/16-20
1
3/8-24
1
7/16-20
1-1/8
3/8-24
Pilot
Series
850
850
850
851
*852
*852
*852
*852
*Call Customer Service for Availability.
Standard angles may be modified from 78° to 99°.
15
M.A. Ford® fax: 800-892-9522 or 563-386-7660
www.maford.com
[email protected]
Countersink Pilot
Series 851
HSS, .093” Shank
Countersink Pilot
Series 852
HSS, .170” Shank
Tool No.
85009370
85009800
85012500
85012850
85015620
85015900
85018750
85019350
85021870
85025000
85025700
EDP
85001
85004
85007
85010
85013
85016
85019
85022
85025
85028
85031
Tool No. EDP
85109370 85034
Tool No.
EDP
85112500 85037
85118750 85040 *85218750
*85219350
*85221870
85125000 85043 *85225000
*85225700
85131250 85046
85137500 85049 *85237500
85052
85055
85058
85061
85064
85070
Pilots
HSS, .086” Shank
D1
Size Decimal
3/32
.0937
40
.0980
1/8
.1250
30
.1285
5/32
.1562
21
.1590
3/16
.1875
10
.1935
7/32
.2187
1/4
.2500
F
.2570
5/16
.3125
3/8
.3750
D1
Countersink Accessories
Countersink Pilot
Series 850
*Call Customer Service for Availability.
Special Pilot diameters available on request.
Customer Service
800-553-8024
Safety Note: Always wear the appropriate personal
protection equipment such as safety glasses and
protective clothing when using solid carbide or HSS
cutting tools. Machines should be fully guarded.
Technical data provided should be considered advisory
only as variations may be necessary depending on the
particular application.
M.A. Ford® phone: 800-553-8024 or 563-391-6220.
For Product Information, contact your local distributor.
16
Countersink Accessories
Micro-Stop Fixtures
Non-Marking Pads
Countersinks
Micro-Stop Fixtures
Series 80
Micro-Stop fixtures are designed for precise
countersinking and deburring operations that
ensures perpendicular alignment with the
workpiece and exact depth of cut control. When
the fixture is properly adjusted, only the pilot or
tip end of the cutter will extend beyond the end
of the fixture. However, when the tool is fed into
the hole, the cutting edge is exposed, and a cut
is made to a predetermined depth.
• Accommodates a complete selection of Micro-Stop
countersinks and burring cutters.
• 120° seating angle ensures precise axial alignment
of threaded shank tools.
• Use in hand tool or machine tool applications.
• Depth of cut control in .001” increments.
Non-Marking Pad
Series 80000006
Non-Marking Pad
Series 80000007
Steel
Plastic
EDP 80011
EDP 80016
• Steel non-marking pads offer
long life.
• Designed for 80000002
Micro-Stop Fixtures.
• Plastic non-marking pads
afford maximum workpiece
protection.
• Designed for 80000002 MicroStop Fixtures.
Non-Marking Pads are
designed to protect workpiece
surface finishes. They also
help ensure perpendicular
alignment with the workpiece.
Cutter
Diameter
Tool No.
80000002
80000008
80000009
80000010
80000011
80000006
80000007
17
EDP
80006
80021
80026
80031
80036
80011
80016
Min.
N.A.
3/4
3/4
3/4
3/4
M.A. Ford® fax: 800-892-9522 or 563-386-7660
Max.
Shank
Thread
5/8
1/4
1/4-28
7/8
3/8
7/16-20
7/8
3/8
3/8-24
1-1/8
3/8
7/16-20
1-1/8
3/8
3/8-24
Steel Non-Marking Pad
Plastic Non-Marking Pad
www.maford.com
[email protected]
Minimum Body Diameter For
82° Flat Head Cap Screws
Feed Rates
®
Uniflute countersinks are designed with cam relief; therefore
feed rates should not exceed .005” per revolution on larger
diameter holes. Reduced feeds also are recommended for
smaller holes. A controlled feed results in the chatter-free
®
finishes associated with the Uniflute .
Multiple Flute Feeds
Multiple flute countersinks are designed for increased feed
rates. Because there is more than one cutting edge, chip
loads are not excessive, and chatter can be controlled,
allowing higher feeds.
Speeds
To determine optimum speed, start at the lower end of the
speed range, and then increase speeds until performance is
maximized. When a countersink is operated at excessive
RPM, chatter may result, and cutting edges can overheat and
become prematurely dull.
SFM
Material
HSS
HSS TiN HSS ALtima®
Coated Blaze Coated Carbide
Aluminum / Aluminum Alloys
150-250 190-315
240-400
300-500
Brass / Bronze (ordinary)
75-125
90-160
120-200
150-250
Iron - Cast (soft)
75-125
90-160
120-200
125-225
Iron - Cast (medium hard)
50-100
65-125
80-160
100-175
Iron - Hard Chilled
10-20
15-25
20-35
20-35
Iron - Malleable
80-90
100-115
130-145
90-150
125-250 160-310
200-400
250-400
Magnesium / Magnesium Alloys
Monel, High Nickel Steel
30-50
40-65
50-80
50-75
Plastics, Bakelite
100-250 125-315
160-400
250-400
Steel - Mild (.2 - .3 carbon)
80-100
100-125
130-160
120-170
Steel - Mild (.4 - .5 carbon)
70-80
85-100
115-130
80-150
Tool Steels (1.2 carbon)
50-60
65-75
80-100
60-100
Steel - Forgings
40-50
50-65
65-80
50-80
Steel - Alloys (300 - 400 Brinnell)
20-30
25-40
35-50
30-50
Steel - High Tensile (35 - 40 Rc)
30-40
40-50
50-65
40-60
Steel - High Tensile (40 - 45 Rc)
25-35
30-45
40-56
35-55
Steel - High Tensile (45 - 50 Rc)
15-25
20-30
25-40
25-40
Steel - High Tensile (50 - 55 Rc)
7-15
10-20
15-30
15-20
Stainless Steel - Free Machining
30-80
40-100
50-130
80-125
Stainless Steel - Work Hardening
15-50
20-65
30-80
50-75
Ti-75A (commercially pure Titanium)
50-60
65-75
80-100
60-90
Inconel Alloys
15-20
20-25
25-35
25-35
Conversion Formulas
(SFM X 3.82)/ Tool Diameter=RPM
Screw
Size
#4
#5
#6
#8
#10
#12
1/4
5/16
3/8
7/16
1/2
5/8
3/4
Series 67
Size
7/16
9/16
9/16
9/16
9/16
13/16
13/16
1-1/8
1-1/8
1-1/8
1-1/2
1-1/2
1-1/2
All other C'sinks
Size
1/4
5/16
5/16
3/8
1/2
1/2
5/8
3/4
7/8
7/8
1
1-1/4
1-1/2
Technical Info
®
Uniflute
Countersinks
Application Data
Diameter Gain in Size For
Each .001” of Axial Depth
in Hole
Included
Angle
30°
45°
60°
82°
90°
100°
120°
Axial
Depth
Axial
Depth
0.001
0.001
0.001
0.001
0.001
0.001
0.001
Diameter
Gain
0.0005
0.0008
0.0010
0.0017
0.0020
0.0028
0.0034
Included
Angle
D2
D1
DIAMETER GAIN = D2-D1
ISO 9001:2000 Certified
Designed
and
Manufactured
in the USA
18
M.A.
F
ORD
High Performance Cutting Tools
Since 1919
Our Innovation Continues...
M.A. Ford®’s
EXTREME HIGH PERFORMANCE
Drills and End Mills Offer
EXTREME PRODUCTIVITY
and COST SOLUTIONS
for Today’s Industries!
®
XR
Relentless roughing cuts on stainless steel, Inc
and all hard to machine materials. Heli-pitch
grinding geometry promotes continual vibration
free cutting regardless of depth of cut or width o
cut. Designed for maximum metal removal rates
Use Roughing Speeds
and
Achieve Your Finishing Needs!
®
X-AL
Designed for Extreme Productivity with maximum
speed and productivity in aluminum alloys. Two or
Three flute designs that can be run at high chip
loads and aggressive feed rates.
19
Tws er
™
Xtreme Drilling
Extreme High Performance drilling with extended tool
life. A new flute profile, unique drill point, and the
latest surface coating technology combined in a drill
that can be applied in a broad range of materials. The
Twister XD™ will significantly reduce cost per hole.
conel
n
of
s.
20
World Class Service
World Class Products
M.A. Ford® employs full service Sales, Marketing
and Customer Service teams that are readily
available to assist you with all your cutting tool
needs. From tool selection and order processing to
technical applications consultation, our teams
provide world-class service and products.
ISO 9001:2000 Certified
M.A. Ford®’s Complete Product Line
Tws er Drills
End Mills
®
®
TrueSize Reamers
®
Edgehog Carbide Burs
®
Countersinks
Miniature Drills /
Diamond Grind Routers
Custom Tools
M.A. Ford Mfg. Co, Inc.
P.O. Box 3628, Davenport, IA 52808
7737 Northwest Blvd., Davenport, IA 52806
Ph: 563-391-6220 or 800-553-8024
Fax: 563-386-7660 or 800-892-9522
www.maford.com e-mail: [email protected]
M.A. Ford Europe Ltd.
Unit 38, Royal Scot Road, Pride Park
Derby DE24 8AJ United Kingdom
Ph: + 44(0) 1332 267960
Fax: + 44(0) 1332 267969
e-mail: [email protected]
WBCSNK08