Bessey Tools Catalogue - Edward B. Mueller Company
Transcription
Bessey Tools Catalogue - Edward B. Mueller Company
Bessey Tools North America Tool Catalog www.besseytools.com The K Body® Parallel Clamp 1. Poly-clad steel jaws - durable, non-marring,glue-resistant 2. Over sized, Acme thread - positive grip with minimum turns 3. Large wood handle - comfort grip; hand tightens to 1,000 lbs. clamping pressure 4. Large, parallel jaws - always at a 90° angle to the rail; even pressure across the entire surface; no bowing, turning or lifting of work 5. Unique jaw-locking system - dual locking set screws permanently molded into the sliding arm; interlock with serration on both sides of the rail for non-slip grip 6. Cold drawn, profiled steel rail - made in Bessey's own mill for quality control; engineered to minimize flexing or bending, galvanized to prevent rust and marks on wood 3 1 2 4 5 6 Now a spreader too! K Body Clamps are now fitted with a swivel foot pad that serves a dual function. It is removable which allows a woodworker to reverse the lower K Body jaw for use as a spreader. It also functions as a levelling foot to keep the K Body rail parallel to the work surface. As an added benefit it serves as a hanger on a workshop peg hook. Nobody but Bessey has ever designed and built a clamp that works like a K Body Clamp ... NOBODY. The Bessey K Body is the original parallel clamp, designed for woodworkers who depend on accurate clamping every time they use it. Look closely at the workings of a K Body ...hardenedsteel, locking set screws, steel guide rollers and steel anchor pins. There are also precision internal elements that are not visible. Without any of them, the K Body would simply not stay parallel. NO other clamp on the market uses this system to ensure parallelism. CATALOG NUMBER NOMINAL THROAT NOMINAL OPENING NOMINAL RAIL SIZE NOMINAL PRESSURE K3.512 3 1/2" 12" 1 1/8" X 3/8 " 1000 LBS K3.524 1 3 /2" 24" 1 1/8" X 3/8 " 1000 LBS K3.531 3 1/2" 31" 1 1/8" X 3/8 " 1000 LBS K3.540 3 1/2" 40" 1 1/8" X 3/8 " 1000 LBS K3.550 1 3 /" 50" 1 /"X / " 1000 LBS K3.560 3 1/2" 60" 1 1/8" X 3/8 " K3.582 1 3 /2" 82" K3.598 3 1/2" 98" 2 Bessey UniKlamp This is the "small cousin" of the K Body built on a lighter frame. Although it does not have the precision componentry for the accuracy and precision of the K Body, it is nonetheless a great little universal clamp/spreader for benchtop projects. Exerts even pressure over 11 sq. in. of non-marring jaw surface. CATALOG NUMBER NOMINAL THROAT 1000 LBS UK3.006 1 /8" X /8 " 1000 LBS 1 1/8" X 3/8 " 1000 LBS 1 1 8 3 8 3 NOMINAL OPENING NOMINAL PRESSURE 3 1/8" 6" 550 LBS UK3.012 3 1/8" 12" 550 LBS UK3.018 31/8" 18" 550 LBS 1 Bessey K Body Maxis® VarioPivot System Table of Contents 1. WOODWORKING CLAMPS K Body Clamp Family..........................................Page 1 • KBody clamps,Maxis, UniKlamp, Maxis System Bar Clamps .......................................................Page 3 • Tradesmen bar clamps, accessories and edge clamp, framing clamp, ES clamp sets, LM clamps, KliKlamps, PowerGrip Specialty Clamps ..............................................Page 5 • Angle clamps, vise clamps, variable angle strap clamp, miter clamp, edge clamps, Klemmy clamp, wood handscrew clamps • Duo Klamp, Clippix & VarioClippix, Big Orange urethane hammers, steel spring clamps, pipe clamps, solid surface clamps CATALOG NO. KBM 1 2. GRIP PLIERS..............................................Page 9 Cabinet makers, carvers and hobbyists alike will appreciate the quality and usefulness of this member of the K Body family. The Bessey Maxis enables owners to maximize the use of a K Body by turning it into a virtual European style tail vise for edge joining and surface planing operations. The Maxis can be used with any length K Body or even a pipe clamp. It can be fixed at any angle from 0° to 270°, to hold the work at the most convenient angle. • maximum clamping flexibility – for planing, sanding, carving on edges or surfaces • maximum jaw opening – up to the length of your longest clamp • maximum portability – easy, secure mounting on virtually any work surface from workbench to tailgate • SuperGrips, MultiGrips, welder's forks etc. 3. INDUSTRIAL & WELDING CLAMPS Bessey All Steel Clamps .................................Page 11 • S, SQ, STB, medium and light duty clamps, lever clamps, J clamps, PowerGrip Magnets ..........................................................Page 13 • welders, ground clamps and multi-purpose magnets and specialty magnets for shop and home • Angle & corner clamps, spatter release Specialty Clamps ............................................Page 15 • Claw clamps, high pressure clamps, VAD pads, T bar clamps, deep reach clamps, jig & fixture clamps, table clamps, C clamps Hold Downs......................................................Page 17 • RiteHites, Quick Sets, Kant-Twist ... and the X4 torque multiplier Industrial Hammers.........................................Page 19 Alvin Specialty Compounds............................Page 20 KP Framing System 4. BESSEY CUTTING TECHNOLOGY........Page 21 Rail & Stile Jig for K Body Clamps • Compound leverage snips, special purpose snips, multipurpose cutters, cable and wire cutters, professional shears, pattern snips Packaged 4 to a set for quick, easy set-up for projects like raised panel doors, picture frames, and boxes; glue-resistant; for use with all K Body clamps from 12" to 98". 5. RECO INDUCTION BEARING HEATERS.....................................................Page 23 CATALOG NO. KP BLOCKS WARNING: Always follow these rules of safety Clamps are temporary devices for holding work pieces together while you are working on them. They are not constructed nor intended for lifting, pulling, transporting or any other abnormal use. To guard against injury observe the following general safety rules: DO NOT use clamps for lifting, pulling or transporting; beyond maximum allowable pressure that can be applied by hand; in less than perfect condition or in incomplete condition; if improperly positioned; in applications of excessive vibration or with insufficient pressure; inadequate for a specific job or application (e.g. too light, too heavy or too few clamps); in applications of expanding inner pressure which will cause the tool to become overloaded; in applications of prolonged exposure to ambient temperatures exceeding 300°F (150° C) such as a closed oven. 2 "Nominal Clamping Pressure" as referred to in this catalog is the maximum pressure/weight at which clamps can be operated. Maximum pressure/weight indications are given for new clamps with pressure applied by hand, without the use of a pipe or any other device. Clamping pressure decreases as opening is increased. TM Tradesmen Bar Clamps 7 1. Glue resistant plastic caps - protect work surface 2. Large diameter pad surface - minimizes dimpling 3. Oversized Acme threaded spindle - faster clamping with less cranking for smooth operation. Work-hardened for strength. 4. Large wood handle - for power and comfort 5. Profiled, cold drawn steel rail - engineered to minimize flexing common to ordinary flat railed clamps; made in Bessey's own mill for top quality; galvanized to prevent rust 6. Unique locking mechanism - separates Bessey from “clutch style” clamps. Set screw is permanently molded into the sliding arm to interlock with serration on six sides of the rail. 7. Bessey's fine quality, malleable cast jaws corrugated for strength; press fitted to rail - no mechanical fastener to loosen; powder coated 6 1 2 5 3 4 TradesmenTM MEDIUM DUTY Clamps CATALOG NUMBER NOMINAL THROAT NOMINAL DEPTH OPENING TG2.004 TG2.006 TG2.008 TG2.010 TG2.012 TGJ2.506 TGJ2.512 TGJ2.518 TGJ2.524 TGJ2.530 TGJ2.536 TG3.212 TG3.216 TG3.220 TG3.224 TG4.008 TG4.012 TG4.016 TG4.524 TG4.540 2" 2" 2" 2" 2" 21/2" 21/2" 21/2" 21/2" 21/2" 21/2" 31/4" 31/4" 31/4" 31/4" 4" 4" 4" 41/2" 41/2" TRP2.5 (fits TGJ2.5) TRP4.5 (fits TG4.5) 4" 6" 8" 10" 12" 6" 12" 18" 24" 30" 36" 12" 16" 20" 24" 8" 12" 16" 24" 40" NOMINAL RAIL SIZE NOMINAL CLAMPING PRESSURE TradesmenTM HEAVY DUTY Clamps CATALOG NUMBER NOMINAL THROAT NOMINAL DEPTH OPENING 1 NOMINAL RAIL SIZE 3 NOMINAL CLAMPING PRESSURE 7 TGK4.516 4 /2" 16" 1 /8" X /16" 1540 LBS. /32" X 3/16" 450 LBS. 1 19 3 2" TGK4.524 4 / 24" 13/8" X 7/16" 1540 LBS. /32" X /16" 450 LBS. 19 31" 13/8" X 7/16" 1540 LBS. TGK4.531 41/2" /32" X 3/16" 450 LBS. 1 19 TGK4.540 4 /2" 40" 13/8" X 7/16" 1540 LBS. /32" X 3/16" 450 LBS. 1 19 TGK4.550 4 /2" 50" 13/8" X 7/16" 1540 LBS. /32" X 3/16" 450 LBS. 1 TGK4.560 4 /2" 60" 13/8" X 7/16" 1540 LBS. 1" X 1/4" 600 LBS. TGK4.579 41/2" 79" 13/8" X 7/16" 1540 LBS. 1" X 1/4" 600 LBS. 1 TGK4.598 4 /2" 98" 13/8" X 7/16" 1540 LBS. 1" X 1/4" 600 LBS. 1 TG5.512 5 /2" 12" 11/4" X 3/8" 1320 LBS. 1" X 1/4" 600 LBS. 1 TG5.524 5 /2" 24" 11/4" X 3/8" 1320 LBS. 1" X 1/4" 600 LBS. TG5.540 51/2" 40" 11/4" X 3/8" 1320 LBS. 1" X 1/4" 600 LBS. TG7.016 7" 16" 11/4" X 3/8" 1320 LBS. 1" X 1/4" 600 LBS. TG7.024 7" 24" 11/4" X 3/8" 1320 LBS. 1" X 1/4" 600 LBS. TG7.040 7" 40" 11/4" X 3/8" 1320 LBS. 1" X 1/4" 600 LBS. TG7.048 7" 48" 11/4" X 3/8" 1320 LBS. 1" X 1/4" 600 LBS. CDS 20-10WP 10" 20" 11/4" X 1/2" 1550 LBS. 1" X 5/16" 880 LBS. CDS 20-12WP 12" 20" 11/4" X 1/2" 1550 LBS. 1" X 5/16" 880 LBS. CDS 20-20WP 20" 20" 11/4" X 1/2" 990 LBS. 1" X 5/16" 880 LBS. 1" X 5/16" 1100 LBS. 1" X 5/16" 1100 LBS. TradesmenTM Replacement Protective Pads 19 TRP4.0 (fits TG4.0) SKS10/20 (universal - fits TG2.004 to TG4.008) TRP5.5 -(fits TGK4.5, TG5.5 & TG7.0) SKS20/40 - (universal - fits TG4.008 to TG7.048) Edge Clamps Quickly converts Tradesmen and most standard bar clamps to a three way edge clamp — ideal for edge gluing, such as applying wood trim to counter tops. CATALOG NUMBER 5-1 (Single Spindle) 5-2 (Double Spindle) 3 LM General Purpose Clamps TM PowerGripTM KliKlamp LM clamps are built for economical light duty clamping for hobbyists and professional woodworkers. Packed with the features that you expect in a Bessey - cast jaws; bright drawn serrated steel rail; large Acme threaded spindle, non-marring cap. A CATALOG NUMBER NOMINAL THROAT NOMINAL DEPTH OPENING LM2.004 LM2.006 LM2.008 LM2.012 LM3.006 LM3.008 LM3.012 LM3.018 LM3.024 LM3.030 LM3.036 LM4.008 LM4.012 LM4.016 LM4.024 LM4.032 2" 2" 2" 2" 3" 3" 3" 3" 3" 3" 3" 4" 4" 4" 4" 4" 4" 6" 8" 12" 6" 8" 12" 18" 24" 30" 36" 8" 12" 16" 24" 32" NOMINAL RAIL SIZE 19 7 /32" X /32" 7 /32" X /32" 19 7 /32" X /32" 19 7 /32" X /32" 19 7 /32" X /32" 19 7 /32" X /32" 19 7 /32" X /32" 19 7 /32" X /32" 19 7 /32" X /32" 19 7 /32" X /32" 19 7 /32" X /32" 31 15 /32" X /64" 31 15 /32" X /64" 31 15 /32" X /64" 31 15 /32" X /64" 31 15 /32" X /64" 19 NOMINAL CLAMPING PRESSURE 330 LBS. 330 LBS. 330 LBS. 330 LBS. 440 LBS. 440 LBS. 440 LBS. 440 LBS. 440 LBS. 440 LBS. 440 LBS. 550 LBS. 550 LBS. 550 LBS. 550 LBS. 550 LBS. From a "light-as-a-feather" touch up to 330 lbs, always the right pressure. Quick clamping, quick release on virtually any shape. The KliKlamp's ratchet action resists vibration ... the perfect clamp around power tools! For larger projects, see the Ratchet Action Lever Clamp on Page 12 CAT. NO KLI3.004 KLI3.008 KLI3.012 NOMINAL NOMINAL THROAT JAW DEPTH OPENING 3" 4" 3" 8" 3" 12" CATALOG NO. 4 TF4.7524 NOMINAL THROAT DEPTH 4 3/4" NOMINAL JAW OPENING 24" C ES Irregular Angle Clamp Set The Ultimate One-hand Clamp ... with variable pressure. Timber Framing Clamp Designed for the construction trades - a firm hammer-blow to the striking surface drives the penetrating spike into framing timber. Flared depth-stop sets spike to appropriate depth and it is also notched for easy removal with claw hammer. The timber clamp features drop-forged steel jaws, cold-drawn profiled galvanized steel rail, high strength tommy bar and swivel mounted pressure plate. This is a tough clamp that adds another hand to the framer's tool kit. B NOMINAL PRESSURE 330 LBS 330 LBS 330 LBS Used with the Bessey TGK series, this ball & socket system facilitates direct pressure on irregular angles from 150 to 1800. The ES Set consists of two glue-resistant, glass fiber pressure caps and two clamping blocks with anti-slip, non-marring inlaid pads. ES SET: includes two blocks and two caps ES24/6 SET: includes two blocks, two caps and three Tradesmen Bar Clamps (one 24" – TGK4.524 & two 6"– TGJ2.506) ES31/6 SET: includes two blocks, two caps and three Tradesmen Bar Clamps (one 31" –TGK4.531 & two 6"– TGJ2.506) ES40/6 SET: includes two blocks, two caps and three Tradesmen Bar Clamps (one 40" –TGK4.540 & two 6"– TGJ2.506) For light clamping pressure: squeeze the handy two-way lever either from the (A) rail side or the (B) handle side of the clamp. For up to 1,000 lbs. clamping pressure: give a hefty crank on the (C) power handle. Standard Bessey quality features: Glue resistant, non-marring plastic caps; large diameter pad surface; oversized Acme thread; large wood handle; profiled, cold drawn steel rail engineered to minimize flexing,galvanized to prevent rust. Added features: quick release button for rapid sliding arm action; Glass-fiber, reinforced polymer housing and hand lever are light in weight but tough enough for industrial use. Nominal Clamping Pressure: Using the lever: up to 200 lbs. Using power handle: up to 1,000 lbs. CATALOG NUMBER DESCRIPTION PG-12 PG-24 PG4.012 PG4.024 aluminum handle aluminum handle wood handle wood handle NOMINAL THROAT NOMINAL DEPTH OPENING 4" 4" 4" 4" 12" 24" 12" 24" Variable Angle Strap Clamp WS Angle Clamps Vise Clamps 1 2 3 Holds and aligns material at a 90° angle ... adjusts automatically to wood thickness. Accurate, ideal for cabinetry Features: Galvanized spindle; Acme thread; die cast jaws - plastic-coated to protect work; designed for clearance for dowels, screws or staples while gluing. CATALOG NUMBER DIFFERENT MATERIAL THICKNESS UNIFORM MATERIAL THICKNESS CLEARANCE FOR T-JOINTS WS-3 SIDE ONE: 7/8" SIDE ONE: 2" 11/8" SIDE TWO: 21/2" SIDE TWO: 2" SIDE ONE: 1" SIDE ONE: 4" SIDE ONE: 6" SIDE TWO: 4" WS-6 Highly versatile, the S-10 and S-15 vise clamps are ideal for holding rounds, rectangles and odd-shaped objects. Their lightweight, sturdy construction makes this a great tool for home, cottage, hobby or recreational use ... and is particularly suited to holding delicate mechanical parts or assemblies. The Vise Clamps feature: a galvanized spindle with large Acme thread; nonmarring, glue-resistant jaws; removable galvanized guide bars- which when removed allow jaws to swivel accommodating irregular shapes. 27/16" WS-1 Angle Clamp An economical fixed 900 angle clamp for miter or butt joints. Holds work up to 3", mounting holes for fixing to work surface CATALOG NUMBER S-10 S-15 NOMINAL OPENING NOMINAL WIDTH 4" 6" 3 5/8" 3 5/8" TK-6 table clamps ... hold Bessey table-top clamps onto a work surface – one pair is included with the S-10 and S-15 Vise Clamps. CAT. NO. MATERIAL THICKNESS WS-1 UP TO 4 5 The Bessey high performance VAS-23 Variable Angle Strap Clamp is more functional and convenient than ordinary generic strap clamps. 1.Corner clip with Vario-Angle swivel pads - clamps any and all angles from 600 to 1800 . Four clips are included with the clamp. Extra clips can be purchased separately, six to a package. 2.23 ft. polyester strap - woven like a seat belt, up to 1,100 lbs. tensile strength with minimal stretch 3.Easy-to-use strap lock - mechanism releases and locks strap around awkward or large assemblies. 4.Strap winder - stores strap tangle free and out from under foot. Crank can be mounted on either side for left or right hand rewinding. Dual Tightening Mechanism: 5.Geared rewind mechanism - for precise adjustment - tightens strap evenly from both sides for distortion-free clamping. 6.Torque Handle - ergonomic design for comfort and easy application of maximum pressure 6 They are also available as an accessory for the WS-3 and the WS-6 Angle Clamps. 3" Miter Clamp For creating angled joints from 450 to 1200. The swivel clamping jaws, fitted with non-marking surfaces, will draw joint together as the screw is tightened, regardless of the angle. Rigid steel base fitted with 3 large anti-slip pads. Clamp body is made of CATALOG MAXIMUM NUMBER OPENING shock resistant super polyamid. GS-11 4" CATALOG NUMBER STRAP WIDTH STRAP LENGTH VAS-23 1" 23 FT. VAC-6 – SET OF 6 ADDITIONAL CLIPS 5 Professional One Hand Edge Clamp Heavy Duty Klemmy Clamps 3-Way Edge Clamp Tightens and secures with a simple twist of the handle! Ideal for edge gluing, gluing curved laminations or for use on solid surface material like granite The Bessey Professional One Hand Edge Clamp was engineered with the custom, production woodworker in mind. The unique compound screw mechanism, enables the operator to simultaneously engage the top and bottom pressure pads while applying pressure to the front edge of a countertop. All three pressure surfaces are advanced with the turn of a single handle. The cushioned pads firmly grip without slipping or damaging the work surface. This clamp has a maximum clamping pressure of 500 lbs. on thickness up to 2 1/8". The Bessey Professional One Hand Edge Clamp works beautifully when applying solid wood edging onto straight edged countertops or when bending solid wood edging into curves. The Bessey Professional One Hand Edge Clamp features: • Lightweight, aluminum frame ... optimized for high static stress loads. Micro-coated surface prevents corrosion and discoloration • Large Jaws ... with integral, soft plastic caps for gentle, non-slip clamping • Large opening ... for clamping up to 21/8" • Ergonomically shaped handle ... designed for one-handed use, provides secure grip – made of impact resistant plastic 6 CATALOG NUMBER NOMINAL THROAT NOMINAL OPENING EKT-55 3" 21/8" TM The Heavy Duty 3-Way Edge Clamp features: extra heavy cast frame that will not distort and bind on the edge screw; tommy bar for easy tightening and strong clamping pressure; large Acme thread ... more power in less turns; extra large plastic pads prevent dimpling of workpiece and marring of finished materials. CATALOG NUMBER TWC-3HD NOMINAL THROAT 31/4" NOMINAL OPENING 3" Also see page 3 for edge clamp fixtures and the Tradesmen Series Bar Clamps The cam action of the Klemmy Clamp is excellent for delicate and light duty clamping applications such as veneering, marquetry, musical instrument building and repair, as well as antique restoration. The Bessey Klemmy clamp features a more traditional look and feel with light weight, non-marring wooden jaws and cork protective pads. CATALOG NUMBER KLW4.008 KLW4.012 KLW4.016 KLW4.024 KLW4.039 NOMINAL THROAT DEPTH 4" 4" 4" 4" 4" NOMINAL OPENING 8" 12" 16" 24" 34" Bessey Wood Handscrew Clamps Bessey Wood Handscrew Clamps - feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from cold drawn, carbon steel. Acme thread for rapid operation and years of hard use. Hardwood handles are over-sized for comfort, extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement. Metal parts are treated to resist rust. The jaws, made from quality hard maple for a lifetime of use, are oiled to resist glue. CATALOG NUMBER JAW LENGTH MAX. JAW OPENING THROAT DEPTH HS-4 HS-5 HS-6 HS-8 HS-10 HS-12 HS-14 4" 5" 6" 8" 10" 12" 14" 21/4" 23/4" 3" 5" 7" 91/4" 101/4" 2" 21/2" 3" 4" 5" 6" 7" SPINDLE DIAMETER 1 /4" /4" 5 /16" 7 /16" 7 /16" 7 /16" 7 /16" 1 Bessey DuoKlamp Bessey VarioClippix The one-handed clamp & spreader with a unique "twist"! The spring clamp with a big appetite for work! Clamp or spreader ... ... with the twist of a dial! No more disassembling the jaws of the clamp to convert it to a spreader. The super new DuoKlamp incorporates a handy mini-dial that reverses the action from clamping to spreading ... with a simple twist! The DuoKlamp also features: • smooth, easy one-handed pump action • durable, glue resistant composite material • soft-touch, removable/reversible pressure pads • clamps or spreads front, side and behind the rail for wide use • well balanced for single-handed use • extremely large clamping surface • Clamping pressure of over 260 lbs. CLAMPING CATALOG NUMBER DUO16-6 DUO30-6 DUO16-8 DUO30-8 DUO45-8 DUO65-8 NOMINAL DEPTH NOMINAL OPENING 2 1/2" 2 1/2" 3 1/4" 3 1/4" 3 1/4" 3 1/4" 6" 12" 6" 12" 18" 24" SPREADING A B NOMINAL NOMINAL NOMINAL DEPTH OPENING DEPTH 2 1/4" 2 1/4" 3" 3" 3" 3" 8 1/2" 14" 9 1/4" 15" 21" 27" 1 /4" /4" 3 /8" 3 /8" 3 /8" 3 /8" 1 The VarioClippix is a clever variation on a standard spring clamp. The handles stay at a constant setting, making it comfortable in the hand ... infinitely adjustable jaws open up to 4" - one clamp does the work of four different spring clamps. • Soft anti-slip two component handle for comfort • Soft pads on jaw pressure points to eliminate marring of work • Hand pressure remains constant for all openings • Variable jaw openings allow control on clamping pressures ... opening jaws beyond size of work piece reduces jaw pressure and protects work surface from marring CATALOG NUMBER NOMINAL DEPTH NOMINAL OPENING CLAMPING PRESSURE XV3-50 XV5-100 11/2" 2" up to 25/8" up to 41/4" variable variable Bessey Clippix NOMINAL OPENING 6" 12" 6 1/2" 12" 18 1/2" 26" The same Bessey quality in a standard fixed pivot spring clamp. CAT. NO. NOMINAL OPENING MAXIMUM OPENING XC2 XC5 XC7 1" 2" 3" 11/8" 21/2" 3" 7 Big Orange Urethane Hammers TM These non-marring, shock-absorbing assembly mallets are virtually indestructible. The solid urethane head won't mushroom or split and will not damage the work surface. Tough fiberglass handles hold up to years of use and are vibration dampening for reduced worker fatigue. Comfortable grips are ribbed to be non-slip. CAT. NO. HEAD DIAMETER 790 791 792 793 1 /8" 7 1 /8" 5 2 /16" 3 2 /4" 5 HEAD LENGTH 1 2 /2" 1 3 /4" 7 3 /8" 5 4 /8" HANDLE LENGTH 10" 1 10 /2" 1 12 /2" 1 12 /2" Bessey Seaming Tool for Solid Surface Installation Vacuum Cups … instantly secures the PS55 to any smooth, non-porous material such as solid surface, SSV laminate, marble and granite to eliminate the need for glue blocks. Cup made from rugged highpressure aluminum alloy with the highest quality rubber diaphragm. Vacuum Operating Lever … activates and locks the vacuum seal on the work surface. Quick release. Completely portable. Work Hardened Steel Spindle … smoothly draws deck seams together with just the right pressure. Galvanized spindle will hold up to years of wear. Oversized Wooden Handle … comfortable for any hand. Cold Drawn Guide Rods … create a solid, rigid frame for supporting vacuum cups and leveling toggles... minimizing panel lifting. Leveling Toggles … this unique feature easily and accurately levels deck joints during seaming ... reducing the need for sanding. B Cat. No. Nominal Span Nominal Width Nominal Length A B C PS55 2.1" 5.1" 9.4" - 11.6" Nominal Pressure 48.5 lb. A C Back Splash Clamp Bessey Traditional Steel Spring Clamps Bessey Pipe Clamp Fixtures These clamps feature: heavy duty springs for more pressure and longer life; nickel plated – won’t rust or mark work piece; heavy duty vinyl tips and handles won’t mar clamping surfaces. These clamps feature: plated spindles to prevent rust & corrosion; “clutch” action grips bar automatically; large clamping surface – positive grip; large handle – positive pressure. The Bessey VGCCK-1 “V- groove” Mitered-Cove, Back-Splash Clamp ... draws the two primary pieces of backsplash together at a 90° angle and then draws the 45° mitered corner in tight without using seaming tape. Rugged, lightweight and glueresistant this tool is an economical and fast way to prepare mitered cove backsplash and drop edges. pipe not included CAT. NO. 8 XM3 XM5 XM7 XM10 NOMINAL OPENING MAXIMUM OPENING CLAMPING PRESSURE CATALOG NUMBER 1" 2" 3" 4" 11/4" 21/4" 35/16" 5" 33.0 LBS. 49.5 LBS. 66.0 LBS. 63.0 LBS. PC-12 PC-34 PCDR-34 DESCRIPTION fits 1/2" black pipe (not included) fits 3/4" black pipe (not included) deep reach fixture fits 3/4" black pipe (not included) The Bessey S-15 Backsplash Clamp ... holds the backsplash at 90° to the top deck without additional squaring accessories and is an ideal clamp for seaming with glue blocks. Features large, slip-proof, glue resistant jaws and over-sized handle for comfort and easy adjustment. Ideal for holding alignment while fabricating edge build-ups. Works with solid surface, laminate, granite and marble. A wide range of Bessey grip plier designs for a broad variety of uses. MultiGripTM Slim plier-type jaw opens in two stages for "pre-clamping" effect ... allows adjustments before applying maximum pressure. Integrated locking devise to pre-set jaw opening for repetitive work. MultiGrips come with plastic jaw caps. Bessey SuperGrips TM With ordinary grip pliers, the jaw opening has to be adjusted manually each time they are used. Besides being awkward, finicky and and time consuming ... clamping pressure cannot be controlled. In addition, the jaws of the ordinary grip pliers by their design do not remain parallel with each other. Infinitely adjustable jaw made of hardened chromevanadium steel. Bessey SuperGrips solve these problems by combining the jaw adjustment of their legendary sliding-arm clamps ... with the functionality of the grip pliers design. The best of both worlds! Rail made of cold drawn profiled steel ... from Bessey's own drawing mill, optimized for high static stress loadings. Screw with lock nut ... for clamping pressure adjustment. CATALOG NUMBER SG2-MGR NOMINAL THROAT DEPTH NOMINAL OPENING NOMINAL CLAMPING PRESSURE 23/4" 21/2" 222 LBS. Convenient, plastic coated release lever ... ergonomically designed and free of kickback. Welder's Fork Forked jaws clamp two workpieces together over an obstruction Serrated, non-slip hardened profile lower jaw ... shaped for universal use. SCREW WITH LOCK NUT ... permits adjustment of jaw angle for clamping tapered parts (up to 7°). Deep Reach Clamps over angle iron, channel iron and other assemblies or obstruction. CATALOG NUMBER NOMINAL THROAT NOMINAL DEPTH OPENING STANDARD SUPERGRIPS SG-4 21/2" SG-4WP(w/pads) 21/2" SG-8 21/2" SG-8WP(w/pads) 21/2" VarioGrip Welder's Fork 2 sliding heads that can be adjusted independently ... at different heights AND depths 4" 4" 8" 8" NOMINAL CLAMPING PRESSURE 440 LBS. 440 LBS. 440 LBS. 440 LBS. Pipe Clamp WELDER'S GROUND SUPERGRIPS (400 AMP) "Cradle" jaw aligns and holds pipe firmly in place SG-GC 21/2" 4" 310 LBS. SUPERGRIP ACCESSORIES SG PADS (SET OF 2 PADS FITS SG-4 AND SG-8) CATALOG NUMBER WELDERS’ FORK SG24-WF NOMINAL THROAT DEPTH NOMINAL OPENING NOMINAL CLAMPING PRESSURE CATALOG NUMBER 3" 4" 310 LBS. 4" 310 LBS. VARIOGRIP WELDERS’ FORK SG24-VWF 3" NOMINAL THROAT DEPTH NOMINAL OPENING NOMINAL CLAMPING PRESSURE DEEP REACH SG5-DR 3" 41/2" 310 LBS. PIPE CLAMPS SG24-PC 23/4" 41/2" 310 LB. SG Protective pads ... available for the SG-4 and SG-8 9 The Legendary Bessey Heat Treated, Steel Clamps The Bessey Difference The backbone of our clamp is the legendary steel rail ... and it distinguishes the Bessey steel clamp from all others. From our origins, we built our reputation as a steel company and make every rail in our own mills. From raw material to the finished rail ... that is the Bessey difference. Rolled steel ... bright drawn ... quenched and tempered. 1. Rail, fixed jaws and pressure plate heat-formed in one piece from cold drawn profiled steel …optimized for high static stress loadings, tempered and electro-galvanized. 2. Tempered Steel Sliding Arm* ... drop forged, electrogalvanized. 3. High-strength electro-galvanized tommy bar handle … with ergonomically rounded ends for power-tightening 4. Heat treated, high carbon Acme threaded screw* … is tempered and quenched to give you greater loading capacity and longer service life. Spatter resistant. 5. Unique Bessey Morpad* tilts to 350 … tempered thrust bolt can be unscrewed for easy maintenance or replacement. 1 5 The Replaceable Bessey Morpad Safety Factor ... Unlike ordinary pads using a common ball and socket fixture, the unique Bessey Morpad has a hemispherical design instead of an ordinary round ball ... the result is a greater angle of pivot AND a pad that won't pop out of its socket under pressure for added safety. 2 4 3 10 ... heat formed * Replacement Parts: drop forged sliding arms, Acme threaded spindles and Morpads are available for many of the Bessey all-steel clamps. Bessey S Series Clamp with Morpad Bessey SQ and STB Series Clamps with Standard Swivel Pad SQ Series STB Series SQ, STB and S Series clamps offer a greater reach often replacing the need to buy both regular AND deep throat clamps. CATALOG NUMBER NOMINAL OPENING NOMINAL THROAT DEPTH NOMINAL CLAMPING PRESSURE NOMINAL RAIL SIZE 1800 Series Medium Duty Clamps – with Morpad 1800S-8 8" 43/4 " 1800 lbs. 11/16" x 1/2" 1800S-12 12" 43/4 " 1800 lbs. 11/16" x 1/2" 2400 Series Regular Duty Clamps – with Morpad 2400S-6 6" 51/2" 2660 lbs. 2400S-8 8" 51/2" 2660 lbs. 2400S-10 10" 51/2" 2660 lbs. 2400S-12 12" 51/2" 2660 lbs. 2400S-20 20" 51/2" 2660 lbs. 2400S-40 40" 51/2" 2660 lbs. 2400S-60 60" 51/2" 2660 lbs. 13/16" x 9/16" 13/16" x 9/16" 13/16" x 9/16" 13/16" x 9/16" 13/16" x 9/16" 13/16" x 9/16" 13/16" x 9/16" 4800 Series Heavy Duty Clamps – with Morpad 4800S-12 12" 7" 4880 lbs. 4800S-20 20" 7" 4880 lbs. 4800S-40 40" 7" 4880 lbs. 4800S-48 48" 7" 4880 lbs. 4800S-60 60" 7" 4880 lbs. 1 9⁄16" x 3⁄4" 1 9⁄16" x 3⁄4" 1 9⁄16" x 3⁄4" 1 9⁄16" x 3⁄4" 1 9⁄16" x 3⁄4" 7200 Series Extra Heavy Duty Clamps – with Morpad 7200S-12 12" 8" 7770 lbs. 1 15⁄16" x 1" 7200S-20 20" 8" 7770 lbs. 1 15⁄16" x 1" 7200S-40 40" 8" 7770 lbs. 1 15⁄16" x 1" 4800S 1800S CATALOG NUMBER NOMINAL OPENING NOMINAL CLAMPING PRESSURE SQ Series Clamps with standard swivel pad SQ-4 6" 4 3/4" 1330 lbs. SQ-8 8" 4 3/4" 2660 lbs. SQ-10 10" 4 3/4" 2660 lbs. 1 2660 lbs. SQ-12 12" 5 /2" SQ-20 20" 4 3/4" 2660 lbs. NOMINAL RAIL SIZE 27 /32" x 13/32" 1 /16" x 9/16 " 1 3/16" x 9/16 " 1 3/16" x 9/16 " 1 3/16" x 9/16 " 3 STB Series Clamps with standard swivel pad and hex head spindle STB30 12" 7" 4880 LBS. 1 9/16" X 3/4" STB50 20" 7" 4880 LBS. 1 9/16" X 3/4" STB100 40" 7" 4880 LBS. 1 9/16" X 3/4" The little clamp that does the work of a 1", 2" or 3" C clamp ... but does it 9X faster! The MightyMini’s sliding-arm moves to position itself right next to your work-piece to support the Acme threaded screw! By comparison, when a 3” C-clamp is used to do the job of a 1” Cclamp, the point of support for the screw does NOT move ... leaving the extended screw to do all the work. The result can be a clamp that “walks” ... or worse, a screw that bends or breaks. 2400S CATALOG NUMBER MMS-4 7200S NOMINAL THROAT DEPTH MMS-8 NOMINAL OPENING NOMINAL THROAT DEPTH NOMINAL CLAMPING PRESSURE 4" 8" 2 1/4" 2 1/2" 660 LBS. 660 LBS. 11 Bessey Light to Medium Duty Clamps with Standard Swivel Pad WOOD HANDLE Bessey “Step-Over” The Bessey Rapid Action Lever Clamp J-Series Clamps TOMMY BAR HANDLE CATALOG NUMBER NOMINAL THROAT NOMINAL DEPTH OPENING NOMINAL RAIL SIZE NOMINAL CLAMPING PRESSURE LIGHT PRESSURE SERIES - WOOD HANDLE, STANDARD PAD 7 G10Z 2" 4" /16" X 7/32" 330 LBS. 7 /16" X 7/32" 330 LBS. G15B5Z 2" 6" 7 /16" X 7/32" 330 LBS. G20B5Z 2" 8" G30B5Z 2" 12" 7/16" X 7/32" 330 LBS. 1 17 G12Z 2 /2" 5" /32" X 1/4" 450 LBS. 1 17 /32" X 1/4" 450 LBS. G40B6Z 2 /2" 16" 1 17 /32" X 1/4" 450 LBS. G50B6Z 2 /2" 20" 300 & 500 SERIES - WOOD HANDLE, STANDARD PAD 7 300S-4 2" 4" /16" X 7/32" 330 LBS. 5 500S-6 3" 6" /8" X 9/32" 550 LBS. 3 500S-8 4" 8" /4" X 3/8" 660 LBS. 1 2 500S-12 5 / " 12" 1" X 15/32" 1200 LBS. 1200 SERIES - TOMMY BAR HANDLE, STANDARD PAD 1200S-8 5 1/2" 8" 1" X 15/32" 1200 LBS. 1 1200S-12 5 /2" 12" 1" X 15/32" 1200 LBS. LIGHT DUTY SERIES - TOMMY BAR HANDLE, STANDARD PAD 5 G16ZK 3 1/4" 6" /8 " X 9/32" 550 LBS.. 3 G20ZK 4" 8" /4" X 3/8" 660 LBS. 3 4 /4" 16" G40ZK 1" X 15/32" 1660 LBS. 3 G50ZK 4 /4" 20" 1" X 15/32" 1660 LBS. 3 G60ZK 4 /4" 24" 1" X 15/32" 1660 LBS. 3 G80ZK 4 /4" 31" 1" X 15/32" 1660 LBS. 3 G100ZK 4 /4" 40" 1" X 15/32" 1660 LBS. 3 4 /4" 50" G125ZK 1" X 15/32" 1660 LBS. 12 MEDIUM DUTY SERIES 4 3/4" SGL20 4 3/4" SGL25 4 3/4" SGL30 4 3/4" SGL40 4 3/4" SGL50 4 3/4" SGL60 Designed for applications where vibration causes a conventional clamp to “walk” ... the lever clamp stays firmly in place even when used with power tools. • features the legendary Bessey galvanized heat-treated rail and drop forged sliding arm • surface hardened, steel cam and pressure plate for exceptional wear • poly coated release trigger and powder coated clamping lever ... for comfort, leverage and long life • rapid lever action increases speed and productivity in multiple clamp applications • available in conventional AND "step-over" style rails for range of use NOMINAL THROAT DEPTH NOMINAL OPENING NOMINAL CLAMPING PRESSURE 23/8" 31/8" 4" 43/4" 51/2" 5" 4" 6" 8" 10" 12" 20" 400 LBS. 500 LBS. 770 LBS. 880 LBS. 1110 LBS. 1440 LBS. OFFSET HANDLE ... for more leverage 1800L-12 51/2" 12" 1800 LBS. CATALOG NUMBER STANDARD HANDLE LC-4 LC-6 LC-8 LC-10 LC-12 LC-20 J-SERIES LEVER CLAMP ... with offset handle JLC24-12 51/2" 12" PowerGripTM with aluminum Handle The Ultimate One-hand Clamp ... also available with a wood handle ... see page 4 for full description. Nominal Clamping Pressure: Using the lever - up to 200 lbs. Using power handle - up to 1,000 lbs. - TOMMY BAR HANDLE, STANDARD PAD 8" 10" 12" 16" 20" 24" 1 1/16" X 1/2" 1 1/16" X 1/2" 1 1/16" X 1/2" 1 1/16" X 1/2" 1 1/16" X 1/2" 1 1/16" X 1/2" 1800 LBS. 1800 LBS. 1800 LBS. 1800 LBS. 1800 LBS. 1800 LBS. 1800 LBS. CATALOG NUMBER DESCRIPTION PG-12 PG-24 PG4.012 PG4.024 aluminum handle aluminum handle wood handle wood handle NOMINAL THROAT NOMINAL DEPTH OPENING 4" 4" 4" 4" 12" 24" 12" 24" All the great features of the legendary Bessey Sliding arm clamps ... PLUS a feature that adds a ton of flexibility to clamping. The return rail lets the J clamps “step-over” the lip on channel iron, angle-iron, I-beam or other obstructions. Available in a conventional all-steel clamp style as well as a lever clamp for a wide range of uses. CAT. NO. NOMINAL THROAT NOMINAL RAIL DEPTH OPENING RETURN J24-12 5 1/2" J48-20 1 12" 5 /2" 20" JLC24-12 5 1/2" 12" 4" 4" NOMINAL RAIL SIZE NOMINAL CLAMPING PRESSURE 1 3/16" X 9/16" 2660 LBS. 9 3 1 /16" X /4" 4880 LBS.. 4 1/4" 1 13/16" X 9/16" 1800 LBS. Angle and Corner Clamps Welder’s Multi-Angle Vise Set Dual vises swivel independently 5° to 180° • set screws lock at pre-determined angle • Copper plated screw resists weld spatter • Slotted cast iron base mounts to work table • Vises can each be used independently CATALOG NUMBER JAW HEIGHT JAW LENGTH NOMINAL OPENING WVS-4 11/2" 5" 4" Welder’s Corner Clamps • Open construction for easy access to work • Holds different thickness of metals at 90°. WSM 9 and 12 One-handed, Self-centering Jig & Fixture Clamps • Unobstructed working area - easy access for welding, assembly and through-ways for T-joints. • Base and clamping block made of high-grade cast iron, precision milled, electro-galvanized • Copper plated Acme screw resists against weld spatter • Jaws and base machined at precise right angles to each other • Swivel-mounted spindle nuts ... with grease nipples for easy maintenance and long service life CAT. NO H94/1 H94/2 NOM. OPENING 2" 4" • Slotted base holes mount easily to work table. High walls easily holds pipe and square tubing • Floating head and rotating spindle holds, fixes and aligns different material thicknesses at a 90° angle. Ideal for plates, angle iron, square tubing, pipe, channel iron, etc. TOTAL CATALOG NUMBER JAW HEIGHT JAW LENGTH “T” JOINTS CAPACITY FOR SIDES MITER JOINTS EACH SIDE WSM-9 WSM-12 11/2" 21/2" 4" 41/2" 21/2" 4" 7" 91/2" 31/2" 43/4" PASSAGE FOR Welder’s Magnetic Ground Clamps • Spring loaded electrode secures ground to work surface; rotating stud assembly allows ground wire to rotate 360°– free of work area. • Ground clamps are fitted with handles for ease-of-use. Connection stud is 1/2". CATALOG NUMBER MAX. AMP. NOMINAL HEIGHT AVERAGE PULL MGC-1 MGC-2 250 AMP. 800 AMP. 2" 21/2" 55 LBS. 55 LBS. 250 AMP. Bessey Spatter Release ... prevent spatter sticking to work surface and build-up on M.I.G. nozzles WATER BASED Spatter Release: won't harm painted surfaces, welds through when wet, environmentally friendly ... non-flammable, nontoxic, biodegradable. SOLVENT BASED Spatter Release: Heat resistant to withstand high temperatures, paint compatible and the spray agent dries quickly - leaves a long lasting spatter release coating ... NO silicones, CFC's or trichloroethylene, uses CO2 propellant, non-flammable. 800 AMP. CAT. NO. DESCRIPTION 16300-16 WATER BASED 1620-16 SOLVENT BASED CAN SIZE 16 OZ AEROSOL 16 OZ AEROSOL 13 Multi-Purpose Magnetic Squares • "... like having an extra hand." • Quality, ferrite and rare earth magnets for fast, simple set-ups • Holds work at set angles ... double magnets at ANY angle • Larger models have “T” handles to “break” magnet from work WMS-1 WMS-3 AVERAGE PULL: 66 LBS. 33/8" W. X 33/8" H. X 5/8" D. AVERAGE PULL: 55 LBS. 33/8" W. X 33/8" H. X 5/8" D. WMS-5 WMS-6 AVERAGE PULL: 112 LBS. 33/4" W. X 43/8" H. X 3/4" D. AVERAGE PULL: 52 LBS. 33/4" W. X 43/8" H. X 3/4".D WMS-4 CMS-1 AVERAGE PULL 110 LBS. 61/8" X W. X 33/8"H. X 5/8"D. AVERAGE PULL: 100 LBS. 33/4" W. X 43/8" H. X 15/8"D. BDMS-1 WMS-7 AVERAGE PULL: 100 LBS. 8" W. X 8" H. X 15/8" D. AVERAGE PULL 41 LBS. 61/8"W. X 33/8"H. X 5/8"D. Convenient Specialty Magnets for Shop or Home MW-1 MagWand MSP-24 MagSweep MS-1 - magnet with telescoping shaft MBT - magnet with bendable shaft The 22” MagWand can pick up to 12 lbs. of swarf in a pass for a cleaner, safer workshop. It rolls easily over the work surface and a hard industrial polymer guard “dumps” the waste with a simple pull on the sliding magnetic insert. Fast, efficient - a great devise for welding and machine shops. The MagSweep is the “bigger picker-upper” has a powerful magnet that sweeps a 24" wide swath inside on shop floors or outside in parking lots. A simple pull on a waist-high level handle dumps the payload. Large wheels for easy rolling. MBC - Magnetic Belt Clip Handy magnetic tool is ideal for retrieving iron objects from hard to reach spot where your fingers just can’t reach. 14 CATALOG NUMBER DESCRIPTION MS-1 MBT MBC MW-1 MPU-1 MSP-24 MAGSTIK (single item) MAGBEND-IT (single item) BELTMAG CLIP (single item) MAGWAND MAGPICK-UP PAL (single item) MAGSWEEP MPU - Magnetic Pick-Up Magnetic Clip conveniently clips to your belt to MPU- Magnetic pick-up tool on a 35” tubular handle is ideal for clean-up without the usual “pain- prevent awkward (and painful) fumbling in your pocket or pouch for screws, nails, etc. in-the-back”. Bessey Claw Clamp The Bessey Claw Clamp is ideal for clamping (or spreading) in tight spaces • Spindle mechanism can be positioned outside working area ... for use on small projecting surfaces and confined spaces. • With stop-screw removed, sliding arm can be reinstalled upside-down for use as a spreader (requires optional CLS shoe). Bessey Variable Angle Device (VAD Pad) CAT. NO. VAD CATALOG NUMBER CL-12 CL-24 CL-40 CLS SHOE NOMINAL OPENING 12" 24" 40" NOMINAL THROAT DEPTH 4" 4" 4" NOMINAL CLAMPING PRESSURE 1775 LBS. 1775 LBS. 1775 LBS. Bessey High Pressure Clamp DESCRIPTION SET OF TWO • High-grade sheet steel, electro-galvanized sliding arm, can be positioned anywhere on rail, max. swivelling distance 26 mm. • High-grade cast pressure plate ... swivels up to 30°. • Oversized spindle, nuts and bearing pins ... for high strength, durability and long life. • Floating pads tilt 60° inward or outward ideal for clamping or aligning round, oval and angular pieces • Assembly is easy to install and remove ... swivels 360° or can be fixed • Fits up to 2400 series clamps Bessey T-Bar Clamps Bessey Deep Reach Pipe Clamp with Morpad 8500 lb. clamping pressure for construction job sites, bridge work, boiler makers, etc. • Safety wedge for additional locking pressure on sliding arm • Morpad tilts 35° • Hex head spindle CATALOG NUMBER 8500HPC-6 8500HPC-10 8500HPC-14 NOMINAL OPENING NOMINAL THROAT DEPTH NOMINAL CLAMPING PRESSURE 6" 10" 14" 4" 4" 4" 8500 LBS. 8500 LBS. 8500 LBS. • Fast, easy adjustment of movable jaw simply slide to work piece, locate jaw at closest convenient hole in rail, and lock jaw in position with clamping pin. • Sliding and adjustable jaws are malleable cast iron ... “T” section rail is steel CATALOG NUMBER BT-36 BT-70 BT-96 BT-120 NOMINAL NOMINAL NOMINAL THROAT CLAMPING NOMINAL OPENING DEPTH PRESSURE RAIL SIZE 39" 70" 98" 120" 2" 2" 2" 2" 3990 LBS. 3990 LBS. 3330 LBS. 2660 LBS. 2" X 2" 2" X 2" 2" X 2". 2" X 2" • Holds pipe in alignment for welding • Jaws & clamp arms are made from malleable iron • Fits pipe from 4" to 16" O.D. CATALOG NUMBER MIN. PIPE MAX. PIPE THROAT DEPTH PC4-7 4" 71/2" 4" PC4-10 4" 10" 51/4" PC4-16 4" 16" 10" 15 Bessey Jig & Fixture Clamp Bessey Claw Machine Clamp Bessey Hold Down Table Clamps • Secure clamping on any flat surface with appropriate hole ... 360° rotation • Two position bushing assembly - use in either a fixed or rotating position • Comes with 113⁄16" round bushing • Cantilever jaw for clamping in tight space with screw positioned outside of work area • Full rotation through 360° radius for easy set-up and positioning outside of work area Vibration proof, ratchet action mechanism is fast and secure. Ideal for milling or drilling on machines equipped with “T” slots. Clamp swivels and has a quick release button to instantly release pressure. CATALOG NUMBER NOMINAL OPENING NOMINAL THROAT DEPTH FC24-8 8" 4 /2" 1 NOMINAL CLAMPING PRESSURE 2660 LBS. CATALOG NUMBER MCL-8 NOMINAL THROAT NOMINAL DEPTH OPENING 8" 53/4" NOMINAL CLAMPING PRESSURE CATALOG NUMBER 1760 LBS. 1200HD-9 2400HD-10 NOMINAL THROAT DEPTH NOMINAL OPENING NOMINAL CLAMPING PRESSURE 41/4" 41/2" 8" 10" 1220 LBS. 2220 LBS. Bessey C-Clamps Regular Duty Heavy Duty DropMalleable C-Clamp Forged C-Clamp 16 CATALOG NUMBER CM23DR NOMINAL OPENING 2" NOMINAL THROAT DEPTH 31/2" LOAD LIMIT 400 LBS. CM34DR 4" 41/2" 500 LBS. CM10 1" 1" 400 LBS. CM13 1" 3" 400 LBS. CM15 11/2" 31/2" 400 LBS. CM20 2" 11/2" 400 LBS. CM22 21/2" 13/8" CM25 21/2" 21/2" CM30 3" CM40 CM50 • Drop-forged heat-treated steel frame, swivel pad • Choice of spindle and pads: black oxide coated to resist corrosion or copper coated to resist weld spatter 600 LBS. BLACK OXIDE SPINDLE CDF402 COPPER COATED SPINDLE CDF402C NOMINAL OPENING 2" NOMINAL THROAT DEPTH 2" BESSEY LOAD TEST 3500 LBS. SCREW DIAMETER 1/2" 600 LBS. CDF403 CDF403C 3" 23/8" 3500 LBS. 1/2" 2" 800 LBS. CDF404 CDF404C 4" 23/4" 6200 LBS. 3/4" 4" 3" 1200 LBS. CDF406 CDF406C 6" 35/8" 6900 LBS. 3/4" 5" 31/4" 1200 LBS. CDF408 CDF408C 8" 41/2" 6900 LBS. 3/4" 8000 LBS. 3/4" 9300 LBS. 3/4" CM60 6" 31/2" 1200 LBS. CDF410 CDF410C 10" 53/8" CM80 8" 4" 1200 LBS. CDF412 CDF412C 12" 53/4" RiteHite Self Positioning Hold Down Clamping System • Self-positioning, single component design T - S L O T A C C E • Swivel rocker attached body - prevents loss T-Slot Nuts • Instant set-up - AND eliminates shim stock • Hardened machine surfaces will not damage underside of T-slot • Morton T-slot nuts are NOT threaded through to eliminate risk of screwing stud through the nut and damaging the table slot • Wide clamping range- instant adjustment to 5" • Strong, ductile iron body CATALOG NUMBER MAX. STUD SIZE MAX. CLAMPING HEIGHT RITEHITE MODEL L - LONG REACH 3 375L /8" 11/4" 1 500L /2" 21/2" 5 625L /8" 31/2" 3 750L /4" 5" 1000L 1" 5" LOAD LIMIT LBS. NOMINAL DIMENSIONS 1 /8" X 3 /2" 17/16" X 53/4" 17/8" X 63/4" 21/8" X 9" 7 2 /8" X 111/8" 8,000 10,500 18,000 24,000 65,000 RITEHITE MODEL S - SHORT REACH (closer set-ups) 3 376S /8" 1" 11/8" X 3" 1 3 501S /2" 1 /4" 13/8" X 41/4" 5 3 626S /8" 2 /4" 17/8" X 51/2" 3 751S /4" 31/2" 2" X 7" 1001S 1" 3" 27/8" X 9" 10,000 16,800 24,000 35,000 80,000 1 1 A THREAD SIZE CATALOG NUMBER 716TN 12TN 916TN 916TN1 58TN 58TN1 1116TN 1116TN1 34TN 1316TN 1316TN1 78TN 1000TN 1000TN1 10116TN 1000TN2 10116TN2 1018TN1 10116TN1 1018TN 3 /8-16 3 /8-16 3 /8-16 1 /2-13 1 /2-13 1 /2-13 1 /2-13 5 /8-11 5 /8-11 5 /8-11 3 /4-10 3 /4-10 3 /4-10 3 /4-10 3 /4-10 7 /8-9 7 /8-9 7 /8-9 1-8 1-8 B TABLE SLOT SIZE 7 /16 1 /2 9 /16 9 /16 5 /8 5 /8 11 /16 11 /16 3 /4 13 /16 13 /16 7 /8 1 1 11/16 1 11/16 11/8 11/16 11/8 C 1 /2 1 /2 5 /8 5 /8 5 /8 3 /4 3 /4 3 /4 3 /4 1 1 1 1 11/2 11/8 1 11/8 11/2 11/8 11/2 D / 9 /32 11 /32 11 /32 11 /32 3 /8 7 /16 7 /16 15 /32 9 /16 9 /16 9 /16 5 /8 3 /4 11 /16 5 /8 11 /16 3 /4 11 /16 3 /4 7 32 S E 11 /16 7 /8 7 /8 7 /8 1 11/8 1 /8 11/8 11/4 11/4 11/8 11/2 15/8 13/4 15/8 15/8 15/8 13/4 15/8 13/4 F 7 /8 7 /8 11/8 11/8 11/8 11/8 11/4 11/4 11/4 11/2 11/2 11/2 13/4 13/4 2 13/4 2 2 2 2 S O R I CATALOG NUMBER E S THREAD SIZE 36" HEAT-TREATED THREADED ROD 375HSTS 500HSTS 625HSTS 750HSTS 875HSTS 1000HSTS /8-16 /2-13 5 /8-11 3 /4-10 7 /8-9 1-8 3 1 HARDENED STEEL FLANGE NUTS 375FN 500FN 625FN 750FN 875FN 1000FN /8-16 /2-13 5 /8-11 3 /4-10 7 /8-9 1-8 3 1 Jamacc Quick Set Hold Down Clamping System CAT. NO. FOR BOLTS QUICK SET BLOCKS SB-82 SB-83 SB-84 QUICK SET STRAPS 5 PS-876 /8"-7/8" 3 S-100 /4"-1" 3 S-1000 /4"-1" QUICK SET WASHERS 1 W-500 /2" 5 W-625 /8" 3 W-750 /4" 7 W-875 /8" W-1000 1" NOM. LENGTH NOM WIDTH NOM. HEIGHT. NOM. THICKNESS 2" 3" 4" 6" 10" 14" 2" 23/4" 23/4" 1" 19/16" 19/16" /8" /8" 3 /8" 3 /8" 3 /8" 3 3 Quick Set Hardened Straps: drop forged OR cold-drawn, heat-treated straps Quick Set Blocks: drilled and riveted at one end – individual leaves rotate independently to match clamping height (leaf thickness approx. 1/8") Quick Set Heavy Duty Washers: 3/8" thick, 25/8" OD – matched to Quick Set System Quick Set Kits REGULAR DUTY QS-16: 6 Blocks (2 each of SB-82, SB-83, SB-84), 2 Drop Forged Straps (PS-876) 8 Washers (2 each of W500, W625, W750, W875) HEAVY DUTY HQS-20: 12 Blocks (4 each of SB-82, SB-83, SB-84) 2 Heavy Duty 14" Straps (S-1000),12 Washers (4 each of W750, W875, W1000) 17 Kant-Twist® Clamps Unique cantilever clamp with floating jaws that always stay parallel – built-in “V” block to hold round stock – copper plated jaws and screws resist weld spatter. Kant-Twist® Welders’ Ground • Full 4.5" opening can be used as a clamp and ground at the same time • Brass terminal grounds up to 400 amps • Heavy duty construction for high pressure and secure grounding X4 Torque Multiplier The Morton X-4 Torque Multiplier is a geared head devise that offers 4 times the power of an ordinary torque wrench. It is an invaluable tool for maintenance, production, inspection or equipment service where you need the raw power but compressed air is not accessible. Stainless Steel Kant-Twist® • for use where corrosion and magnetism are a problem Kant-Twist® Weaver Grip • Comfort grip - max. pressure/less effort • Easy to tap on and off • High quality ABS plastic for durability CATALOG NUMBER OPENING A MAX. MIN. B C D NOMINAL CLAMPING PRESSURE /4" /16" 1 /2" 1 /2" 1 /2" 7 /8" 7 /8" 7 /8" 7 /8" 11/4" 11/4" 11/4" 200 LBS. 300 LBS. 700 LBS. 700 LBS. 1500 LBS. 1500 LBS. 1800 LBS. 1800 LBS. 1800 LBS. 3500 LBS. 3500 LBS. 6000 LBS. /2" /2" 7 /8" 700 LBS. 1500 LBS. 1500 LBS. 11/2" 1700 LBS. ORIGINAL KANT-TWIST® /4 1 2 21/2D (DEEP THROAT) 3 41/2D (DEEP THROAT) 6 6D (DEEP THROAT) 6D3J (DEEP THROAT/3 JAW) 9 10D (DEEP THROAT) 12 3 /4" 1 1/16" 2" 2 7/16" 3" 4 1/2" 6" 6" 6" 9" 10" 12" 0" 0" 0" 0" 0" 0" 0" 0" 0" 0" 0" 2" /8" /2" 1 1/8" 2" 1 1/4" 2 1/4" 2 1/8" 4 5/8" 4 1/2" 3 3/8" 6" 5" /8" /2" 1 1/4" 113/16" 1 3/4" 2 1/2" 3 3/8" 5 1/2" 5 1/2" 5 1/4" 7 1/2" 7" 2" 3" 4 1/2" 0" 0" 0" 1 1/8" 1 1/4" 2 1/4" 1 1/4" 1 3/4" 2 1/2" 41/2" 0" 21/2" 21/2" 3 3 1 3 1 1 5 STAINLESS STEEL KANT-TWIST® 2-SS 3-SS 41/2D-SS (DEEP THROAT) 1 1 KANT-TWIST® WELDERS’ GROUND 400A-1J CATALOG NUMBER FOR MODELS ... DIAMETER APPROX. LENGTH 1 /2" 11/16" 7 /8" 11/8" 11/2" 21/2" 4" 5" LEGEND FOR CHART ABOVE KANT-TWIST® WEAVER GRIP 1 WG 2 WG 3 WG 6 WG 1 2, 21/2, 2SS 3,3F, 3FT, 41/2D, 3SS, 41/2DSS 6, 6D, 6F, 6FT Only available in Canada • Develops up to 12,000 ft.lbs.of torque • Compact design for use in tight spaces • Does NOT require air or electricity • Can be used with a torque wrench for precision • High grade alloy steel component – maximum strength and service life • More than one torque multiplier can be directly stacked to provide high mechanical ratio ANTI-BACKLASH TORQUE MULTIPLIER • For use where there's risk of “spring back” or where an extended reaction bar is used • Can be coupled with larger model to make entire system anti-backlash Kant-Twist® “T” Slot and Fixture Clamps • Cantilever action clamps parallel to surface • Unique design -work won't shift • Quick release handle for quick set-up • Unobstructed clearance when milling/ drilling CATALOG NUMBER 3F (FIXTURE) 3FT (T-SLOT) W/BOLT 6F (FIXTURE) 6FT (T-SLOT) W/BOLT 18 NOMINAL OPENING 0-25/8" 0-25/8" 0-6" 3 /8"-63/8" NOMINAL CLAMPING PRESSURE 1500 LBS. 1500 LBS. 3200 LBS. 3200 LBS. CAT. NO. INPUT OUTPUT CAPACITY CAPACITY (FT. LBS.) (FT. LBS.) INPUT DRIVE JAMES MORTON X4 TORQUE MULTIPLIER 1 JM-750 250 1000 /2" 3 JM-1000 500 2000 /4" 3 /4" JM-1200 209 3000 JM-1500 923 4000 1" JM-2000 1739 8000 1" JM-2500 2000 12000 1" OUTPUT DRIVE RATIO /4" 1" 11/2" 11/2" 11/2" 21/2" 4:1 4:1 14.3:1 4.33:1 4.6:1 6:1 3 JAMES MORTON X4 ANTI-BACKLASH TORQUE MULTIPLIER 3 1" 4:1 JM-1000-R 500 2000 /4" Industrial Hammers Screw-on Tip Hammers • Meets GGG-H-33A US Government Specs • Hammer supplied with zinc head (holder) ... tips sold separately • Color coded replaceable tips in 5 hardnesses; interchangeable with most other national brands Press-on Tip Hammers • Meets GGG-H-33A US Government Specs • Precision balanced steel head with replaceable, tough urethane tips • Add “1” to hammer number when ordering tip only Jamacc “Big Orange” Hammers • Virtually indestructible, non-marring urethane head – absorbs shock, won’t mushroom or split, non-sparking Brass Hammers • Meets GGG-H-33A US Government Specs • High purity brass head; long life; non-sparking; non-magnetic Copper Hammers • Meets GGG-H-33A US Government Specs • 99.9% pure copper head for long life – non-sparking and non-magnetic Lead Hammers • Meets GGG-H-33A US Government Specs • Genuine 4% antimonium lead • Black oxided steel tubing handle for long life — won’t crack or break • Vinyl grip – more comfort, less fatigue • Molded-in “Plus-lok pin” holds head secure Dead Blow Hammers Shot-loaded head: 30% more force, no recoil • Compound head – lamination won't breakdown or "mushroom"; heat resistant – outlasts metal and rawhide by as much as 20 times – non-sparking • extruded fiberglass handle (less breakage, less vibration, less fatigue) ... non-slip ribbed grip CATALOG NUMBER HEAD WOOD FIBERGLASS DIAMETER SCREW-ON TIP HANDLE/HOLDER 771W 771F 1" 773W 773F 11/2" 775W 775F 2" PRESS-ON TIP HAMMERS 5 700W 700F /8" 3 701W 701F /4" 7 703W 703F /8" 705W 705F 1" 707W 707F 11/4" 709W 709F 13/8" 717W 717F 11/2" 723W 723F 2" JAMACC “BIG ORANGE” HAMMERS 790 15/8" 791 17/8" 792 25/16" 793 23/4" BRASS HAMMERS 7 B750W B750F /8" B751W B751F 1" B752W B752F 11/4" B753W B753F 11/2" B754W B754F 13/4" B755W B755F 17/8" B7510W B7510F 2" COPPER HAMMERS 7 C760W C760F /8" C761W C761F 1" C762W C762F 11/4" C763W C763F 11/2" C764W C764F 13/4" C765W C765F 17/8" C7610W C7610F 2" LEAD HAMMERS L731(steel tube handle) 3/4" L732 (steel tube handle) 11/8" L733 (steel tube handle) 19/16" L735 (steel tube handle) 15/8" JAMACC DEAD BLOW HAMMERS SF-1 11/2" SF-2 2" SF-3 23/8" SF-4 23/4" HEAD LENGTH HANDLE LENGTH 3 1/2" 4 1/2" 5" 11" 12" 13" 2 1/4" 2 1/2" 3" 3 1/4" 3 1/4" 4 1/8" 4" 4" 8" 10" 11" 11" 13" 13" 13" 13" 21/2" 31/4" 37/8" 45/8" 10" 101/2" 121/2" 121/2" 113/16" 29/16" 31/4" 33/4" 41/4" 33/4" 63/4" 11" 12" 13" 14" 15" 15" 21" 113/16" 25/8" 35/16" 33/4" 41/4" 33/4" 63/4" 11" 12" 13" 14" 15" 15" 21" 25/8" 25/8" 31/8" 33/4" 9" 10" 10" 10" 11" 12" 12" 13" SCREW-ON TIPS Fit Hammers .... #771 #773 CATALOG NUMBERS 36G 46G 36 46R 36BR 46BR 36CR 46CR 36BL 46BL #775 57G 57R 57BR 57CR 57BL DESCRIP’N (Color) TOUGH (GREEN) MEDIUM (RED) SOFT (BROWN) MED.HARD (CREAM) HARD (BLACK) MAT’L VINYL VINYL VINYL NYLON NYLON Mor-Head Industrial Hammers ... feature powerful driving force with a unique face that yields to struck surface on contact. Steel shank handles have synthetic rubber grips that are comfortable, contoured, non-slip and safe. Handles and heads are replaceable for cost savings. Mor-Head Soft Alloy Tapping Hammer • 1/2 pound head for tapping • Dense, wear-resistant, ductile alloy is non-destructive Mor-Head Soft Alloy Hammers • Variety of weights for light to medium duty impacts • Dense, wear-resistant, non-destructive ductile alloy Mor-Head Soft Alloy Sledge Hammer • For heavy duty impacts • Dense, wear-resistant, ductile alloy is non-destructive Mor-Head Brass Hammers • Variety of weights for light to medium duty impacts • Non-destructive, wear resistant brass Mor-Head Brass Sledge Hammer 9 lb. head for heavy duty impacts • Non-destructive, wear resistant yellow brass 19 Mor-Head Hand Maul •Contoured shape fits hand for secure use •Head-only shaped for use in confined spaces •Soft alloy head and plastic tip end Alvin Specialty Compounds Lab-metal®... the original ready-to-use metal putty Mor-Head Plastic Faced Hammer • Replaceable, durable, soft-contact plastic tip • Single and double-sided plastic tip • Spreads right from the can – NO mixing – hardens quickly to metal! • Can be drilled, tapped, ground, machined, chiselled, milled ... sanded to a feathered edge • Withstands heat up to 350°F/177°C • Aluminum filled compound – impervious to petroleum products • Bonds to most clean, dry surfaces ...metal, wood, plastic, glass, porcelain etc. Mor-Head Replacement Handles • Steel shank handles are strong and indestructible •Synthetic rubber grips are comfortable, contoured, non-slip and safe •Bolt on head mounts for easy replacement Hi-Temp Lab-metal • Same performance as regular Lab-metal ... but withstands heat up to 1000°F/538° C (after curing at 425°F/218°C for one hour) • Repairs manifolds, core boxes, castings, etc. Mor-Head Replacement Tips • Soft contact – but tough for long life HAMMER CAT. NO. HEAD ONLY CAT. NO. DIMENSION Lab-solvent • Surface-prep for regular & Hi-Temp Lab-metal • Thins Lab-metal for brushing or spraying • Leaves no film and does not corrode • Capful in Lab-metal after each use stops hardening in the can HANDLE ONLY CAT. NO. LENGTH MOR-HEAD SOFT ALLOY TAPPING HAMMER SHD-1 SHD-1H 3" X 11/2" H-905 11" SHD-2 SHD-2H 31/4 "X 15/8" H-905 11" SHD-3 SHD-3H 37/8" X 2" H-905 11" SHD-4 SHD-4H 43/4" X 23/8" H-905 11" SHD-5 SHD-5H 5" X 23/8" H-905 11" MOR-HEAD SOFT ALLOY SHT-1 LIGHT/MEDIUM DUTY SHT-H 21/4" X 1" HAMMER SHT-L 7" 61/2" X 3" SLG-L 30" 11" MOR-HEAD SOFT ALLOY SLEDGE HAMMER SLG-10 SLG-H MOR-HEAD BRASS HAMMER BHD-1 BHD-1H 3 X 11/2" H-905 BHD-2 BHD-2H 31/4 X 15/8" H-905 11" BHD-3 BHD-3H 37/8 X 2" H-905 11" BHD-4 BHD-4H 43/4 X 23/8" H-905 11" BHD-5 BHD-5H 5 X 23/8" H-905 11" SLG-L 30" MOR-HEAD BRASS SLEDGE HAMMER BHD-9 BHD-9H 61/2" X21/2" MOR-HEAD HAND MAUL HM-4 MOR-HEAD PLASTIC FACED HAMMERS SSMH DSMH Plastic faced hammer with double head containing one side plastic and one side “soft alloy” tip Plastic faced hammer with double head containing two plastic tips MOR-HEAD PLASTIC FACED HAMMER TIPS HMT Made in the USA ... Alvin Products for metal work can be just the right answer for tough jobs around the plant or shop. CATALOG NUMBER UNIT SIZE UNITS CASE PER LAB-METAL® LM-06 LM-12 LM-24 LM-48 LM-128 LM-512 6 OZ. (170 G) 12 OZ. (340G) 24 OZ. (680 G) 48 OZ. (1.4 KG) 1 GALLON (3.8 L) 5 GALLON (18.9 L) 12 12 12 12 2 1 Telcon ... mold release and dry lubricant • Coats and lubricates with clean, tough, oil-free semi-transparent shield • Apply to metal, wood, plastic, glass and rubber—anywhere sticking is a problem • Telcon resists temperatures to 500°F, repels water and oil and will not collect dust or dirt • Choose methylene chloride or water dispersion formulas • high solids content for better film thickness and strength • Contains a Teflon®-like active ingredient to reduce friction and help machine parts run efficiently for longer service life HI-TEMP LAB-METAL® HT-14 HT-24 14 OZ. (397 G) 24 OZ. (680 G) 12 12 16 OZ. (473 ML) 1 GALLON (3.8 L) 5 GALLON (18.9 L) 12 2 1 11 OZ. (325 ML aerosol) 12 Plastic tips for SSMH, DSMH, HM-4 LAB-SOLVENT Handles LS-16 LS-128 LS-512 Most of our industrial hammers are available with your choice of handles • strong second-growth hickory for economy • extruded fiberglass for less breakage, vibration and fatigue TELCON TC-11 METHYLENE CHLORIDE DISPERSION TCM-128 TCM-512 2 1 1 GALLON (3.8 L) 5 GALLON (18.9 L) 2 1 1 PINT (.47L) 1 QUART. (.95L) 1 GALLON (3.8 L) 5 GALLON (18.9 L) 12 12 2 1 WATER DISPERSION TCW-128 TCW-512 Refer to spec charts for availability 20 1 GALLON (3.8 L) 5 GALLON (18.9 L) HEAT BLOCK HB-PNT HB-QRT HB-01G HB-05G Heat Block ... heat absorbing, insulating paste • Insulates against heat transfer during welding, soldering brazing or other heat treatment • Protect closely soldered parts, valve gasketing, thin gauge metal, and other materials which could be damaged during repair or installation • Protect wire insulation when soldering and to protect plastic drain pipes in close proximity to metal pipes being replaced and soldered • Prevents distortion to light metals, protects rubber and plastic components and protects painted or finished surfaces during adjacent soldering, brazing or welding • Non-toxic and is easily applied direct from container Bessey Cutting Technology COMPOUND LEVERAGE SNIPS Powerful, Compact, Practical and Efficient ...Less Effort and Fatigue 8 1. Drop forged cutter heads, fully heat treated. Cutting blades are induction hardened. Blades of heavy duty snips made of high speed steel. 2. Adjustable pivot joint 3. Integrated internal steel spring opens snips automatically 6 4. Compound leverage for improved cutting performance 5. Strong torsion resistant steel handles, bright nickel plated. 6. Reliable locking catch 5 7. Ergonomically designed, plastic coated handles with 3 slip guard. user-friendly soft plastic inlay. 8. Flex ring for storage ... also prevents pinching 2 injuries 7 Aviation Snips 4 1 •Cuts angles, curves, circles or straight • Cutter heads - Drop forged and fully heat treated • Produced to precise European standards • Compound leverage for twice the result • Finely serrated jaws to cut work without slipping • “Soft-touch” handles - textured with a soft plastic insert to minimize pressure on hands • Cuts up to 18 gauge (.05”/1.2 mm) steel • Length 91/2", Cutting edge 17/16" CAT. NO. 16S-BE - YELLOW GRIP: CUTS STRAIGHT CAT. NO. 16-BE - GREEN GRIP: CUTS RIGHT CAT. NO. 16L-BE - RED GRIP: CUTS LEFT Offset Snips - TIN Special Hard Cutting Snips • Made of HSS steel for superior durability • Cutter heads - Drop forged and fully heat treated • “Double hard” blades - Drop forged and induction hardened • Titanium coated cutter head - Extra hard • “Soft-touch” handles - textured with a soft plastic insert to minimize pressure on hands • Made for long, straight or curved cuts • Cuts up to 16 gauge (.07”/1.8 mm) steel • Length 101/4", Cutting edge 15/16" • Special High Grade Steel cutting blade • For short straight and curved cuts • Cutter heads - Drop forged and fully heat treated • “Soft-touch” handles - textured with a soft plastic insert to minimize pressure on hands • Cuts up to 18 gauge (.05”/1.2 mm) steel • Length 101/4", Cutting edge 17/16" CAT. NO. D29SS-BE - CUTS RIGHT CAT. NO. D29SSL-BE - CUTS LEFT CAT. No. D27AH-TIN-BE - CUTS RIGHT/STRAIGHT CAT. No. D27AHL-TIN-BE - CUTS LEFT/STRAIGHT New Generation Offset Snips Offset Snips - Premium • Made of HSS steel for superior durability • Cutter heads - Drop forged and fully heat treated • “Double hard” blades - Drop forged and induction hardened • “Soft-touch” handles - textured with a soft plastic insert to minimize pressure on hands • Made for long, straight or curved cuts • Cuts up to 16 gauge (.07”/1.8 mm) steel • Length 101/4", Cutting edge 15/16" CAT. NO. D27AH-BE - CUTS RIGHT CAT. NO. D27AHL-BE - CUTS LEFT • optimized combination of blade design and leverage • Requires 25% less effort than most compound snips • Made for long, straight or curved cuts • Special High Grade Steel cutting blade • Cutter heads - Drop forged and fully heat treated • “Soft-touch” handles - textured with a soft plastic insert to minimize pressure on hands • Cuts up to 18 gauge (.05”/1.2 mm) steel • Length 101/4", Cutting edge 13/8" CAT. NO. D29ASS-BE - CUTS RIGHT CAT. NO. D29ASSL-BE - CUTS LEFT Offset Snips - Long Cuts • Specifically for long straight/curved/angle cuts • Cutter heads - Drop forged and fully heat treated • Produced to precise European standards • Compound leverage for twice the result • Finely serrated jaws to cut work without slipping • “Soft-touch” handles - textured with a soft plastic insert to minimize pressure on hands • Cuts up to 18 gauge (.05”/1.2 mm) steel • Length 91/2", Cutting edge 11/8" CAT. NO. 16A-BE - CUTS RIGHT CAT. NO. 16AL-BE - CUTS LEFT Offset Snips - Short Cuts • Specifically for short straight/curved/angle cuts • Cutter heads - Drop forged and fully heat treated • Produced to precise European standards • Compound leverage for twice the result • Finely serrated jaws to cut work without slipping • Cuts up to 18 gauge (.05”/1.2 mm) steel • Length 91/2", Cutting edge 11/8" CAT. NO. D08-BE - CUTS RIGHT CAT. NO. D08L-BE - CUTS LEFT 21 MultiPurpose Cutters Long Nose, All Purpose, Offset • Stainless steel, drop forged, heat treated cutter head • Compound leverage • 3" cutting blades for further reach • Adjustable screw point • Available in left cutting version only • For cutting lighter gauge sheet metal, mesh, etc. • Cuts up to 18 gauge (.05”/1.2 mm) steel • Length 11", Cutting edge 3" CAT. NO. D22AL-BE Special Purpose Snips Cable Cutters Combinox® • Multi-purpose, mid-size, straight cut for sheet metal, carpet, textiles, paper, cardboard, plastics, wire cable and other material • Notched blade for wire-stripping • Ergonomically designed non-slip plastic handles • Stainless Steel blades • Reliable thumb-operated locking catch • Handle eyelet for hanging and storage • Length 71/2", Cutting edge 13/8" • Cuts up to .25”/10 mm multi-core cables • Stainless steel blades • Spring, open cutters automatically • Reliable locking catch, easily operated with the thumb • Length 61/4" CAT. NO. D49-BE CAT. NO. D50-BE Electrician’s Wire Cutters • Regular-duty, serrated, nickel plated blades • Wire cutting notch •Length 51/2" CAT. NO. D57A Strap Cutter • Made from special High Grade Steel • Drop forged cutter head • Blades designed to safely hold strapping • Compound leverage for twice the results • Cuts up to 18 gauge (.05”/1.2 mm) steel up to 1” wide • Length 101/4", Cutting edge 15/16" CAT. NO. D122S-BE MultiSnip Master • Cutter head made of stainless steel • Cuts many materials of medium thickness and hardness • Ideal for long, straight cuts and wide radii • Adjustable pivot screw • Laterally displaced, angled cutting blades keep hands clear during cutting • Ergonomically designed plastic handles • Spring opens cutter automatically • Reliable locking catch, easily operated with the thumb • Length 71/2", Cutting edge 11/2" CATALOG NUMBER D51A-BE Electrician’s Scissors • Light-duty, serrated, nickel plated blades • Wire-stripping grooves • Length 5" CAT. NO. D53A Industrial and Professional Shears • Heavy duty shears with stainless steel blades • Offset, black laquered handles, extended finger grip CATALOG NUMBER D860-200-BE D860-225-BE D860-250-BE D860-300-BE Nibbler LENGTH 8" 9" 10" 12" • Clean burr-free edges • Nickle-plated handles • Replacement blades available • Cuts up to 23 gauge (.03”/0.8 mm) sheet metal • Length 101/2" CAT. NO. D23-BE MultiSnipsTM • Cutter head made of stainless steel • Universal all purpose snip cuts wide range of material • Ergonomically designed plastic handles • Spring opens cutter automatically • Reliable locking catch, easily operated with the thumb CATALOG NUMBER D47-BE D48-BE D48A-BE 22 LENGTH 51/2" 71/2" 71/2" CUTTING EDGE 13/16" 19/16" 11/2" BLADE STYLE STRAIGHT STRAIGHT OFFSET Straight Pattern Tin Snips • Designed for long straight and wide curved cuts • High grade steel to ensure long life • Drop forged to hold an edge • Soft coated handles • Cuts up to 20 gauge (.04”/1.0 mm) sheet metal CATALOG NUMBER D146-200-BE D146-250-BE D146-300-BE D146-350-BE LENGTH 8" 10" 12" 14" CUTTING EDGE 11/8" 2" 2 1/2" 2 7/8" Reco Induction Bearing Heaters SC110D Model Induction technology means bearing does not need to physically touch crossbar for heating to occur. • easy to use and ready in minutes – mount bearing quickly ... reduce downtime • eliminates hammering and pounding to cold-mount bearings ... extends bearing life and cuts operating costs • works on bearings, sprockets, gears, couplings, sleeves ... increases productivity • no more open flames, torches or open oil baths for heating ... reduces risk to operator • comes with three standard cross bars ... wide size range of bearing application • Reco bearing heaters also demagnitize bearings SC110D (110V or 220V models) • Capacity: bearings up to 4 3/8" wide x 11" O.D. (or 14" OD with optional raising blocks) • computer chip monitors and stabilizes temperature • pre-set times and temeratures, lighted display panel, visible read-outs & auto shut off SC (110V or 220V models) BESSEY & SOHN GMBH & CO., a German family-owned company, was founded in 1889. Internationally recognized as a world-class steel maker, the company first introduced their line of malleable cast iron bar clamps in 1936 and heattreated, all-steel clamps in 1952. Bessey has grown to the largest clamp manufacturer in the world, distributing some 1300 different clamping tools in 90 countries worldwide. Bessey cutting technolgies represent a tradition in the manufacture of tin snips going back more than seventy years. In innovative engineering, industry leading design and impeccable standards of manufacturing in both clamping and cutting technology ... nobody does it like Bessey! • Capacity: bearings up to 4 3/8" wide x 11" O.D. (or 14" OD with optional raising blocks) BC (220V, 440V or 550V models) • Capacity: bearings up to 8" wide x 22" O.D. (or 32" O.D. with optional raising blocks) BC Special (220V, 440V or 550V models) • Capacity: bearings up to 12 1/4" wide x 22" O.D. (or 32" O.D. with optional raising blocks) BEARING HEATER DIMENSIONS Cat. No. A B SC 3 5 8" 7" 11/4" 11/4" 14 3/4" 16" Raising Blocks 12 1/4" 7" 11/4" 11/4" 18 3/4" 16" Raising blocks (sold in pairs) lift bearing heater crossbar for use with larger diameter bearings. BC BC Special CATALOG NUMBER 4 /8" 3 /8" C 3 D E F /4" 1 9" 3 /4" STANDARD CROSS BARS VOLTAGE 9 /4" OPTIONAL CROSS BARS SC 110D 110V (17 AMP) 3 1 110V (17 AMP) 3 1 SC 220 220V (9 AMP) 3 BC 220 220V (30 AMP) 11/4", 2", 3" 3 BC 440 440V (20 AMP) 11/4", 2", 3" 3 SC 110 BC 550 550V (20 AMP) BCS 220 220V (30 AMP) /4", 11/4", 2" /2"* /4", 11/4", 2" 1 1 /4", 2", 3" 1 2 /8" 3 2 /8" 5" 3 /8" BCRB (fits BC and BC Special models) 5 5 Pyrometer/ Thermometer /2"* with probe and flexible cord /4", 1" /4", 1" 3 /4", 1" 1" * BCS 440 440V (20 AMP) 1 / ", 2", 3" 1" * BCS 550 550V (20 AMP) 11/4", 2", 3" 1" * 4 SCRB (fits SC model) 1 /4", 1 /4", 2" 1 /4", 2", 3" HEIGHT WIDTH /2"* 1 1 CATALOG NUMBER * only available in the USA WARNING: DO NOT operate an induction bearing heater if you have a heart pace-maker. The strong magnetic field emitted by the heater may affect operation of such devices. • Multi-purpose heat measuring tool for bearings, gears, etc. • Digital readings (Celsius or Fahrenheit) from -50°C (-58°F) to +1300°C (+2000°F) • Available with flex cord probe for bearings CATALOG NUMBER DESCRIPTION HH-11 5028KW Pyrometer w/probe & flexible cord Replacement Probe with handle Bessey Tools North America UNITED STATES OF AMERICA P.O.BOX 399, BATAVIA, NY 14021-0399 PHONE (585) 344-1160 FAX (585) 344-0025 TOLL FREE 800-828-1004 CANADA P.O.BOX 490, CAMBRIDGE, ON N1R 5V5 PHONE (519) 621-7240 FAX (519) 621-3442 TOLL FREE 800-265-8612 www.besseytools.com THE DESIGNS, SIZES, SPECIFICATION AND SUGGESTED PRICES FOR PRODUCTS IN THIS CATALOG ARE SUBJECT TO CHANGE WITHOUT NOTICE. 23