Knuckle joint press GRABENER GK 360

Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
!
Knuckle joint press GRABENER GK 360
Condition: full complete, working condition, controller should be installed
Year: 1979, retrofit of mechanical parts: 2013
28500 EURO FOB Baltic/Black seaport
!
Kipling Holding LLP
[email protected]
1 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Trimming press KG 9534 250t
!
Condition: full complete, good and working condition, very small worked.
Year: 1991
Maximum force ton-force 250
Slider stroke length mm 320
Unattainable-course mm 8
Number of courses of a slider per minute rpm 32
18000 EURO FOB Black/Baltic sea port
Kipling Holding LLP
[email protected]
2 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Hot forging press SMERAL LZK 4000
!
Condition: full recondition of mechanical parts, press is completed with
NEW original SMERAL's parts: crankshaft, slider, connecting rod, big gear,
all bearings, new bronze, etc., with electric, lubrication, hydraulic systems
It could be inspected under power in March 2014
Rated force - 4000 t
Slide stroke - 380 mm
Frequency of the slide strokes per min - 55
Max distance between slider and bed - 1380 mm
"Fully retrofit" price: 960 000 EURO FOB Italian sea port
Kipling Holding LLP
[email protected]
3 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Hot forging press VORONEZH model K8544 2500t (with
backshaft)
!
Condition: "as is". All bronze parts (bushes, guides etc.) are to be
replaced. As well a bearings should be replaced to new.
Maximum force ton-force, 2500
Slider stroke length mm, 350
Number of courses of a slider per minute, 60
"As is" price: 185.000 EURO FOB Black/Baltic sea port
"Fully retrofit" price: 480 000 EURO FOB Black/Baltic sea port(milling all
the surfaces including slider, new bronze, ball bearings, lubrication, all
disks, new pinion gear and recut the main gear)
Kipling Holding LLP
[email protected]
4 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Steam-air forging hammer KRAMATORSK MA2147 5t
!
Condition: good and working condition
Year: 1982
Weight of dropping part, kg 5000
Impact energy, Kgm 12500
Max course of the hammer block, mm 1300
Courses per min 65
80 000 EURO Black sea port
"Fully retrofit" price: 185 000 EURO FOB Black sea port(milling and
grinding all the surfaces (including guideways, ram and die), new cylinder,
valves)
Kipling Holding LLP
[email protected]
5 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Forging hammer M2143 2t
!
Condition: good working condition, without cracks
Weight of a dropping part, kg 2000
Impact energy Kgm 5000
Max no.of blows 70 per minute
Max ram stroke 1200 mm
47 000 EURO FOB
Kipling Holding LLP
[email protected]
6 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
CENTERLESS GRINDER Mikrosa SASL 125x250
!
Grinding diameter max. 125mm- 630 x 250mm
Sanding sheet- weight about 5 tons
Abmessugen approximately 2300 x 1620 x 3180 Strip set 4,8,16
Connecting power 15 kW
5 000 EURO FOB
Kipling Holding LLP
[email protected]
7 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Trimming press VORONEZH K04.198.244 (KB 9544)
2500t
!
Condition: excellent, still under power
Force: 2500 t
Slider stroke: 630 mm
Slider strokes per minute 12
Shut height: 970 mm
Adjustment: 220 mm
Bed dimensions: 2000 x 2000 mm
340 000 EURO FCA RUSSIA
Kipling Holding LLP
[email protected]
8 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Trimming press ERFURT PKZ III 1250 (4 pcs.)
!
Condition: excellent, still under power
Year: 1987
Force: 1250 t
Table size: 1800 x 1650 mm
Strokes per minute: 14
Slide stroke: 500 mm
Adjustment: 315 mm
135 000 EURO FCA RUSSIA for each
Kipling Holding LLP
[email protected]
9 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Steam-air forging hammer KRAMATORSK 18KP 10ton
!
Condition: good working condition, without cracks
Weight of a dropping part, kg 10000
Impact energy, Kgm 25000 Max.
Ram stroke, mm 1400
210 000 EURO FOB
Kipling Holding LLP
[email protected]
10 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Horizontal forging machine (Upsetter) KRAMATORSK
B1145 3150t
!
Condition: good working condition
Nominal force, kn 31500
Movable die stroke, mm 350
Maximum upsetting ram stroke, mm 700
Upsetting ram work stroke, mm 480
320 000 EURO FOB
Kipling Holding LLP
[email protected]
11 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Forging rolls EUMUCO RW1A
Condition: good working
Max. workpiece diameter 75 mm
Driving power 25 kW
Roll segment diameter 460 mm
Roll length 710 - 1100 mm 30 000 EURO FOB Baltic sea port
Kipling Holding LLP
!
[email protected]
12 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Knuckle Joint press PINSK KB 8336 400t (4 pcs.)
!
Condition: Fully retrofitted by mechanical parts and lubrication system.
Electric in test mode, an electric panel should be installed at your side.
Maximum force: 400t
Table dimensions : 500x500 mm
Ram stroke : 130 mm
25000 EURO FOB for each
Kipling Holding LLP
[email protected]
13 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Hot forging press VORONEZH model KB 8542 1600t
!
Condition: good working, full complete with die holder.
We already dismantled this machine. Please check a photos before and
after dismantling.
The machine is ready for immediate dispatch. Maximum force ton-force 1600
Slider stroke length mm 300
Slider strokes per minute 85
"As is" price: 120.000 EURO FOB Black/Baltic sea port
"Fully retrofit" price: 300 000 EURO FOB Black/Baltic sea port(milling all
the surfaces including slider, new bronze, ball bearings, lubrication, all
disks)
Kipling Holding LLP
[email protected]
14 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Trimming press ERFURT PKZe 1250t
!
Condition: good and working, full complete
Maximum ram force kN 12500
Slide stroke mm 500
Slide adjustment mm 215
YOM: 1988
75 000 EURO FOB Black sea port
Kipling Holding LLP
[email protected]
15 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Hammer M213 3150kg (2 pcs.)
!
Condition: excellent, ready for loading, dispatch - prompt
Full retrofit at 2012
Weight of a dropping part, kg 3150
Impact energy, Kgm 8000
Courses per min 60
1st piece "Fully retrofit" price: 70 000 EURO FOB Japanese sea
port (milling and grinding all the surfaces (including guideways, ram and
die), new cylinder, valves)
2nd piece "Fully retrofit" price: 75 000 EURO FOB St. Petersburg Baltic
sea port (milling and grinding all the surfaces (including guideways, ram
and die), new cylinder, valves)
Kipling Holding LLP
[email protected]
16 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Hot forging press VORONEZH KB 8546 4000 ton
Good working condition.
Made in 1982. "Fresh" gears.
Kipling Holding LLP
[email protected]
17 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
Maximum force, ton-force...4000
Slider stroke length, mm...400
Slider strokes per minute...50
680 000 EURO EXW Russia
!
Reduce rolls CA1335
Condition: full retrofitted mechanic part, renew, guarantee, excellent, full
complete new bronze, hydraulic, pneumatic. Electric in a test mode.
Year: 1995
Capacity 80 t Nominal distance between axis, 320 mm Nominal force, kN 800
20 000 EURO FOB Black/Baltic sea port
Kipling Holding LLP
[email protected]
18 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Knuckle Joint press PINSK KB 8336 400t
Good working condition
Maximum force: 400t
Table dimensions : 500x500 mm
Ram stroke : 130 mm
17 500 EURO FOB
Kipling Holding LLP
[email protected]
19 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Hot forging press KOMATSU CAH-1000
Condition: good working
Max. capacity 1000 tons
Slide stroke 240 mmShut-height (max.) 650 mm
Wedge adjustment 10 mm
Number of slide strokes 100 rpm
122 000 EURO FOB Baltic sea port
Kipling Holding LLP
[email protected]
20 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Screw press WEINGARTEN PSS-480
Condition: full complete, working conditionTable size (left to right) 1000
mm
Table size (front to back) 1050 mm Ram (left to right) 1000 mm Ram (front to back) 1000 mm
265 000 EURO FOB Black/Baltic sea port
Kipling Holding LLP
[email protected]
21 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Hot forging press SMERAL LKM 4000
Pressing force - 4000 Tontable size - 1120 x 1600 mm
Slider size - 1320 x 1320 mm
Course of slider - 400 mm
320 000 EURO FOB Black/Baltic sea port
Kipling Holding LLP
[email protected]
22 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Central driven crank multiway press with two moving
bolsters with uncoiler and manipulator AIDA FT-N600C
Condition: excellent, could be inspected under power
Year: 1992
Capacity 600 ton-force
Force on positions 145 t
Stroke length of slider 500 mm
Size of the slider 3660 х 1000 mm
Size of the bolster 3600 х 1600 mm
200 000 EURO EXW RUSSIA
Kipling Holding LLP
[email protected]
23 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Sheet stamping press ERFURT PKZZ I 1250/4000
Condition: excellent, still under power
Centers of pressure: 2
Force: 1250 t
Slider stroke: 630 mm
Shut height: 1165 mm
Bed: 4000 x 1800 mm 120 000 EURO FCA RUSSIA
Kipling Holding LLP
[email protected]
24 из 25
Used presses and machines. From Russia, Ukraine and other exUSSR countries.
In stock. Quick delivery.
!
Central driven crank multiway press AIDA FTO-L50 500t
Condition: excellent, could be inspected under power Year: 1970
Capacity 500 ton-force
Amount of steps 4
Strokes per minute 10 – 20
Length of press stroke 400 mm
Length of clamp stroke 150 mm
110 000 EURO EXW RUSSIA
!
Kipling Holding LLP
[email protected]
25 из 25