docThink FasT, THINK DURASPIN.
download 
Report Transcription
Think FasT, THINK DURASPIN.
Think Fast, Think Duraspin. Duraspin® Technology continues to evolve... to get the job done faster and more efficiently Senco screw system Senco's new DuraSpin collated screw system range Senco’s iconic DuraSpin screw fastening system has evolved to a new level of speed, power and efficiency. Senco introduces the next generation of its collated auto-feed screwdrivers in traditional corded versions as well as new compact 18-volt 3Ah Li-ion battery powered units that can drive between 1200 to 1400 screws per charge, depending on the screw length and application material. Up to 25% more power Up to 30% more speed The Worlds leading collated screw system: √ Higher Torque √ Higher Speed √ Higher Productivity new battery The new battery is according to the latest standards of Li-ion battery technology. The battery incorporates a charge indicator, is more compact and lighter than previous models and has a much longer lifetime. 2 Up to 100% more screws per battery charge contents Icons Wood construction Packaging Drywall Roofing /sheating CASE General Joinery Features & BENEFITS 4 Collated screw systems 6 A The tool will be delivered in a case accessories The history of Senco DuraSpin collated screws 9 10 Senco is a leading and highly respected manufacturer of pneumatic collated nailing and stapling systems. In 2000 Senco introduced the first DuraSpin collated screw driver. DuraSpin quickly became the preferred choice for professional dry-liners, carpenters and general builders who saw the opportunity to easily improve their productivity. By the mid 2000’s DuraSpin had become one of the greatest successes in Senco’s history, with many industry awards recognising its performance capabilities and supporting its success in becoming a regular performer on most construction sites. In respect to the successes of the original DuraSpin tool range, Senco recognised that to take the product to the next level it required a completely new design that would benefit from the extensive knowledge Senco gained in the collated screw market. In conjunction with the latest available technologies Senco has produced a tool boasting performance features and benefits that cannot be compared to the original product line. DuraSpin technology has now evolved to get your work done even faster and more efficiently: Think Fast, Think Senco DuraSpin Copyright Verpa Senco B.V. Pascallaan 88 8218 NJ Lelystad, The Netherlands [email protected] © Verpa-Senco 2013 All rights reserved; No rights may be derived from the information in this publication. 3 Features & Benefits Tool Free Adjustable Nose Piece Quick Slide Bit Release Move the slide and the bit easily drops in or out With easy-to-read length markings, adjusts to screw lengths of 75mm Corner Fit Access • Patent-Pending Feed System Fully collapsible feed system provides access to tight spaces • Belt-drive mechanism: Delivers smooth operation and requires less user force per drive • Improved line of sight Super Hard Drive Bits Adjustable Depth-ofDrive with Lock • For flush drives or countersinks • Push lock eliminates depth creep and delivers consistent drives • Easy view depth setting window The longest-lasting drive bits available easy load system Improved raildesign for faster and easy loading Landing strip 4 Reverse Switch To back out driven screws Patented Clutch Design Delivers quiet and smooth operation LIMITED WARRANTY High Torque Motor Specifically designed speeds and torques to drive screws with no motor drag Second Hand Grip Helps combat worker fatigue Comfortable Grip Ergonomically designed for extra comfort and better productivity with less exertion Trigger Lock For continuous use applications Belt Hook Variable Speed Trigger Adjustable and reversible to keep the tool within reach for improved productivity Allows user to regulate RPMs for self-tapping screws into steel and other applications Includes TWO NOSE PIECES: 1 2 EXTRA Bits 1.Wood Applications: DC TOOLS: 2.Drywall Applications: AC TOOLS: Ensures a straight drive in harder materials Dimples drywall just right 2 x 18V 3Ah Li-Ion Batteries with Charger 2 3,5m Rubber Power Cord BLOW MOLDED CASE 5 Collated screw systems Heavy duty screw system ds5525-18v 12 Nm 11 Nm 0 Nm 12 Nm 12 Nm 8 Nm 0 Nm 7 Nm 0 Nm 12 Nm 6 Nm 0 Nm 12 Nm 12 Nm 11 Nm 12 12Nm Nm 11 Nm 8 Nm 12Nm Nm 12 Nm 8 7Nm 5 Nm 0 Nm 0 Nm Nm 00Nm Nm 0 0Nm 12 12Nm Nm 12 12Nm Nm 7 Nm 6 Nm 0 0Nm Nm high Speed screw system ds5550-18v Nm 6 5Nm 0 0Nm Nm 12 Nm 5 Nm 0 Nm technical information LxWxH 381x86x241 mm Weight 2,6 kg RPM2500 Torque8Nm Magazine capacity 50 Max. screw length 55mm Battery 18V 3Ah Li-ion Screw per charge up to 1400 Recharge time 1 hour technical information LxWxH 425x70x233 mm Weight 2,1 kg RPM2500 Torque11Nm Magazine capacity 50 Max. screw length 55mm technical information LxWxH 381x86x241 mm Weight 2,6 kg RPM5000 Torque5Nm Magazine capacity 50 Max. screw length 55mm Battery 18V 3Ah Li-ion Screw per charge up to 1400 Recharge time 1 hour Applications Drywall to wood or steel studs, subfloor, cement board, underlayment, sheating to steel, metal framing Applications Drywall to wood or steel studs, subfloor, cement board, underlayment, sheating to steel, metal framing Applications Drywall to wood or steel studs, subfloor, sheathing, cement board, underlayment FEATURES • 2500 RPM high torque motor • Patent pending corner-fit system • Tool-free screw length adjustment • Precise depth-of-drive adjustment with depth lock • Quick slide button bit change FEATURES • 2500 RPM high torque motor • Patent pending corner-fit system • Tool-free screw length adjustment • Precise depth-of-drive adjustment with depth lock • Quick slide button bit change FEATURES • 5000 RPM high speed motor • Patent pending corner-fit system • Tool-free screw length adjustment • Precise depth-of-drive adjustment with depth lock • Quick slide button bit change descriptionART. NR descriptionART. NR descriptionART. NR DS5525-18V EU 7X2001N DS5525-AC EU 7U2001N DS5550-18V EU 7W2001N DS5525-18V UK 7X7001N DS5525-AC UK (230V) 7U7001N DS5550-18V UK 7W7001N DS5525-AC UK (110V) 7U7002N max 8,5 3,5-4,8 13*-55 * 13-50 mm screws require special nosepiece 6 Heavy duty screw system ds5525-ac 3,5-5,5 max 8,5 13*-55 * 13-50 mm screws require special nosepiece max 8,5 3,5-4,2 13*-55 * 13-50 mm screws require special nosepiece 2 Nm m high Speed screw system ds5550-ac 12 Nm 7 Nm 0 Nm 12 Nm 6 Nm 0 Nm multi purpose screw system ds7525-18v 12 Nm 11 Nm 12 Nm 5 Nm 0 Nm 0 Nm 12 Nm 12 Nm 8 Nm 0 Nm 7 Nm 0 Nm 12 Nm 6 Nm 0 Nm 12 Nm multi purpose screw system ds7525-ac 12 Nm 11 Nm 0 Nm 12 Nm 12 Nm 7 Nm 8 Nm 5 Nm 0 Nm 0 Nm 0 Nm 12 Nm 6 Nm 0 Nm technical information LxWxH 425x70x233 mm Weight 2,1 kg RPM5000 Torque7Nm Magazine capacity 50 Max. screw length 55mm technical information LxWxH 394x86x241 mm Weight 2,7 kg RPM2500 Torque8Nm Magazine capacity 50 Max. screw length 75mm Battery 18V 3Ah Li-ion Screw per charge up to 1400 Recharge time 1 hour technical information LxWxH 438x70x233 mm Weight 2,2 kg RPM2500 Torque11Nm Magazine capacity 50 Max. screw length 75mm Applications Drywall to wood or steel studs, subfloor, sheathing, cement board, underlayment Applications Drywall to wood or steel studs, subfloor, cement board, underlayment, sheating to steel, metal framing Applications Drywall to wood or steel studs, subfloor, cement board, underlayment, sheating to steel, metal framing FEATURES • 5000 RPM high speed motor • Patent pending corner-fit system • Tool-free screw length adjustment • Precise depth-of-drive adjustment with depth lock • Quick slide button bit change FEATURES • 2500 RPM high torque motor • Patent pending corner-fit system • Patented sliding screw guide • Tool-free screw length adjustment • Precise depth-of-drive adjustment with depth lock FEATURES • 2500 RPM high torque motor • Patent pending corner-fit system • Patented sliding screw guide • Tool-free screw length adjustment • Precise depth-of-drive adjustment with depth lock descriptionART.NR descriptionART.NR descriptionART.NR DS5550-AC EU 7T2001N DS7525-18V EU 7Y2001N DS7525-AC EU 7V2001N DS5550-AC UK (230V) 7T7001N 7Y7001N DS7525-AC UK (230V) 7V7001N DS5550-AC UK (110V) 7T7002N DS7525-AC UK (110V) 7V7002N 3,5-5,0 max 8,5 13*-55 DS7525-18V UK max 8,5 3,5-4,8 25-75 max 8,5 12 Nm 5 Nm 0 Nm 3,5-5,5 25-75 * 13-50 mm screws require special nosepiece Think fast, think senco duraspin. 7 accessories Easy Driver Screw system DS300-AC 12 Nm 11 Nm 12 Nm 8 Nm 0 Nm 0 Nm 12 Nm 7 Nm 0 Nm 12 Nm 6 Nm 0 Nm 12 Nm 11 Nm 12 Nm 5 Nm 0 Nm 7 Nm 0 Nm 0 Nm 12 Nm 6 Nm 0 Nm 12 Nm 5 Nm 0 Nm technical information LxWxH 800-1054x109x175 mm Weight 3,9 kg RPM3300 Torque6Nm Magazine capacity 50 Max. screw length 75mm technical information LxWxH 800-1054x109x175 mm Weight 3,9 kg RPM3300 Torque6Nm Magazine capacity 50 Max. screw length 75mm Applications Decking, subfloors Applications Specially designed for roofing application FEATURES • Depth adjustment allows precise countersinking of screws • Trigger lock • Height adjustable handle • Patented clutch design for longlasting durability FEATURES • Specifically designed for roofing • Adjustable depth of drive • Height adjustable handle • Trigger lock • Patented clutch design for longlasting durability descriptionART. NR descriptionART. NR DS300-AC EU 230V 1P2001N DS300-AC roofing 230V 1P2001NX DS300-AC UK 230V 1P7001N DS300-AC roofing UK 230V 1P7001NX DS300-AC UK 110V 1P7002N max 8,5 3,5-4,8 32-75 8 12 Nm 12 Nm 8 Nm 0 Nm Roofing screw system DS300-AC max 8,5 3,5-4,8 32-75 DRive Bits in blisterpack Description Art.Nr Charger Select the bit that's right for the job BITS FOR DS5525, DS5550 Screw bit PH2 EA0326B Screw bit SQ2 EA0327B Screw bit PZ2 EA0335B* Screw bit TX20 EA0336B* Screw bit Senco drive EA0333B* BITS FOR DS7525 Screw bit PH2 EA0329B Screw bit SQ2 EA0330B Screw bit PZ2 EA0337B* Screw bit TX20 EA0338B* Screw bit Senco drive EA0334B* BITS FOR DS300AC Screw bit PH2 EAP27530B DescriptonArt.Nr. Screw bit SQ2 EAS27530B Battery charger 18V EU VB0157 Screw bit PZ2 EAPZ27530 Battery charger 18V UK VB0159 Screw bit Senco drive EA0127TB * article could have longer delivery time Nose Pieces Battery DescriptonArt.Nr. DescriptonArt.Nr. DescriptonArt.Nr. Nose piece for drywall Nose piece for wood Battery 18V 3,0Ah DS5525/DS5550FC0886EU DS5525/DS5550FB0162EU DS7525 DS7525 FC0906EU VB0162 FB0160EU Think fast, think senco duraspin. 9 FLAT FLAT FLAT collated screws small small small Recess Recess images images Screw Screw Screw Screw images Screw images images images images Screw images Recess images Screw images 1 2 323 2 33 1 1 1 1 2 12 2 1 2 43 434 4 3 PH PH PH 4 54 5 5 5 4 PZPZ PZ 5 656 6 6 5 6 7 76 7 7 6 87 878 8 7 89 9 8 99 8 SENCO SENCO SENCO 9 109101010 10 111111 12 1112 11 1212 13 1213 12 1313 13 131414 14 141515 15 16 15161616 16 16 1110 1414 1515 9 10 11 12 13 14 15 16 SQSQ SQ TORX TORX TORX T-TAP T-TAP T-TAP Screw images Screw images 1 2 3 4 5 6 Screw Screwthread threadimages images Screw thread images COARSE COARSE COARSE FINE FINE FINE REVERSE REVERSE REVERSE HILO HILO HILO 2/3 2/3 COARSE COARSE 2/3 COARSE 1 8 7 2/3 2/3 HILO HILO 2/3 HILO 29 Index 2/3 TEK 2/3 2/3 TEK TEK 3 4 10 5 11 6 12 7 13 8 14 9 15 10 16 11 12 13 14 REVERSE REVERSE HILO HILO REVERSE HILO Screw images Screw head Screw Screwhead headimages images Screw head images 17 181818 18 19 18191919 19 192020 20 212121 22 2122 21 2222 22 22 2323 23 242424 24 252525 25 25 17171717 1718 2020 2120 2323 2423 2524 17 18 19 20 21 22 23 24 25 DOUBLE DOUBLE BUGLE BUGLE DOUBLE BUGLE BUGLE BUGLE BUGLE 1 TRUSS TRUSS TRUSS TRUSS FLAT FLAT TRUSS FLAT FLAT FLAT TRUSS FLAT TRUSS FLAT UNDERCUT UNDERCUT UNDERCUT UNDERCUT UNDERCUT UNDERCUT UNDERCUT SMALL SMALL SMALL SMALL SMALL 44 NIBS NIBS SMALL 4 NIBS 17 FLAT FLAT 44 NIBS NIBS FLAT 4 NIBS FLAT FLAT FLAT 18 19 21 22 3 4 5 6 7 8 9 PAN PAN PAN 23 FLAT FLAT 88 NIBS NIBS FLAT 8 NIBS DRILL DRILL DRILL SHARP SHARP SHARP TYPE TYPE 1717 TYPE 17 DIAMOND DIAMOND DIAMOND 24 17 25 18 19 20 21 23 1 WINGED WINGED DRILL DRILL WINGED DRILL Phosphate 24 2 325 Screw images 17 18 19 20 21 Recess 1 2 22 SQ SQSQ SQSQSQ SQ TORX TORX TORX TORX TORX TORX TORX SENCO Screw thread SQ TORX PH Screw Screw Screw Screw thread Screw thread thread thread thread images images images images images Screw thread images Screw thread images T-TAP PZ 17 SENCO 7 4 5 24 25 TRUSS FL FLA UNDERCU 6 7 8 sm Stainless Steel Recess images PZ 6 Green ruspert II T-TAP T-TAP T-TAP T-TAP T-TAP T-TAP T-TAP Recess images PH 5 Yellow zinc 3 23 small SENCO SENCO SENCO SENCO SENCO SENCO SENCO 4 Clear zinc FLAT Recess Recess Recess Recess Recess images images images images images Recess images Recess images PZ PZPZ PZPZPZ PZ 13 Screw images 22 small small small small small small small PH PH PHPH PHPH PH 12 TRUSS FLAT UNDERCUT Screw Screwpoint pointimages images Screw point images REDUCE DRILL REDUCE DRILL REDUCE DRILL 11 TRUSS FLAT UNDERCUT FLAT FLAT FLAT FLAT FLAT FLAT FLAT Screw point 10 Material/Finish T-TAP T-TAP T-TAP 20 2 18 SQ 19 20 TORX 21 22 T-TAP Weatherex II REVERSE REVERSE REVERSE REVERSE REVERSE HILO HILO HILOHILO HILO COARSE COARSE COARSE COARSE COARSE FINE FINE FINEFINE FINE 2/3 2/3 2/3 COARSE COARSE 2/3 COARSE 2/3 COARSE COARSE 2/3 2/3 2/3 HILO HILO 2/3 HILO 2/3 HILO HILO 2/3 2/3 2/3 TEK TEK 2/3 TEK 2/3 TEK TEK REVERSE REVERSE REVERSE REVERSE REVERSE HILO HILO HILOHILO HILO REVERSE FINE 2/3 COARSE 2/3 HILO 2/3 TEK REVERSE HILO REVERSEHILO HILO COARSE FINE COARSE 2/3 COARSE 2/3 HILO 2/3 TEK REVERSE HILO Screw thread images FINE COARSE REVERSE Screw thread images HILO 2/3 COARSE Recess images Screw Screw Screw Screw head Screw head head head images images head images images images Screw head images Screw head images 2/3 HILO 2/3 TEK REVERSE PZ COARSE PH FINE 17 Items * could have 18 marked 19 20 21 a longer lead time. 2/3 HILO 2/3 COARSE REVERSE HILO HILO SENCO SQ TORX 22 23 2/3 TEK T-TAP DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE BUGLE BUGLE BUGLE BUGLE BUGLE SMALL SMALL SMALL SMALL SMALL FLAT FLAT FLAT FLAT 4 NIBS 4NIBS FLAT NIBS 4 NIBS 4 T-TAP T-TAP T-TAP T-TAP T-TAP PAN PAN PANPAN PAN FLAT FLAT FLAT FLAT 8 NIBS 8NIBS FLAT NIBS 8 NIBS 8 BUGLE SMALL FLAT 44 NIBS T-TAP FLAT 88 NIBS DOUBLE SMALL SMALL SMALL 4 4 SMALL NIBS 4NIBS NIBS 4 NIBS 4 FLAT FLAT FLAT FLAT FLAT SMALL 4SMALL NIBS FLAT BUGLEBUGLE SMALL FLAT 4 NIBS NIBS T-TAP PAN PAN FLAT 8 NIBS NIBS BUGLE BUGLE BUGLE BUGLE BUGLE SMALL 4 NIBS NIBS FLAT BUGLE Screw head images BUGLE DOUBLE BUGLE SMALL SMALL Screw 4 NIBS headFLAT images FLAT 4 NIBS Screw thread images DOUBLE BUGLE FINE BUGLE Screw Screw Screw Screw point Screw point point point images images point images images images Screw point images Screw point images T-TAP PAN FLAT 8 NIBS images Drywall Recess to wood SMALL COARSE SMALL 4 NIBS REVERSE FLAT 4 NIBS 2/3 PZ COARSE FLAT PH HILO T-TAP 2/3 HILO SENCO WINGED WINGED WINGED WINGED WINGED WINGED REDUCE REDUCE REDUCE REDUCE DRILL REDUCE DRILL DRILL DRILL DRILL DRILL DRILL DRILL DRILL DRILL SHARP SHARP SHARP SHARP SHARP TYPE TYPE TYPE TYPE 17 17 TYPE 1717 DIAMOND DIAMOND DIAMOND DIAMOND DIAMOND REDUCE DRILL DRILL 1717 DIAMOND WINGED DRILL DRILL DRILL DRILL DRILL REDUCE DRILL DRILL SHARP SHARPTYPE TYPE 17 DIAMONDDRILL DRILL Screw point images REDUCE DRILL DRILL SHARP TYPE 17 DIAMOND REDUCE DRILL DRILL BUGLE WINGED Recess images Screw thread images DRILL Screw pointScrew imageshead images DOUBLE SHARP BUGLE COARSE FINE 4 NIBS DIAMOND SMALLTYPE 17 PHSMALL PZ FLAT Size 10 HILO T-T S Screw thread images Screw head images Screw point images REDUCE DRILL WINGED REVERSE 4 NIBS SENCO DRILLFLAT DRILL SHARP DOUBLE REVERSE HILO 4 N COARSE FINEBUGLE SMALL SMALL BUGLE WINGED TYPE 17 DIAMOND DRILL Material/Finish Head Ø Art.Nr 3,9 x 25mm Phosphate 8,00-8,50 39A25MP 3,9 x 30mm Phosphate 8,00-8,50 39A30MP 3,9 x 35mm Phosphate 3,9 x 41mm Phosphate 3,9 x 45mm Phosphate 8,00-8,50 39A45MP 3,9 x 50mm Phosphate 8,00-8,50 39A50MP 3,9 x 55mm Phosphate 4,5 x 75mm Phosphate 3,9 x 32mm Clear Zinc 8,00-8,50 39A32MC-5 3,9 x 35mm Clear Zinc 8,00-8,50 39A35MC-5 3,9 x 42mm Clear Zinc 8,00-8,50 39A42MC-5 3,9 x 55mm Clear Zinc 8,00-8,50 39A55MC-5 Screw head images Screw point images 8,00-8,50DOUBLE 39A35MP BUGLE SMALL SMALL 4 NIBS BUGLE REDUCE DRILL DRILL TYPE 8,00-8,50 39A41MP SHARP * Screw8,00-8,50 point images 8,00-8,50 REDUCE DRILL DRILL 39A55MP 45A75MP SHARP TYPE 17 * * small FLAT Recess Screwimages images 1 2 3 4 PH 5 6 PZ 7 8 17 9 SENCO 18 10 SQ 11 19 12 20 1321 TORX small TRUSS FLAT UNDERCUT Recess images 14 22 15 23 T-TAP 16 24 25 17 PH PZ 1 3 4 5 6 7 8 10 17 9 REVERSE SENCO COARSE PZ FINE PH 11 18 HILO SQ 19 13 12 20 14 2/3 COARSE TORX 21 15 22 2/3 HILO T-TAP 24 2/3 TEK Drywall to wood 20 DOUBLE BUGLE COARSE BUGLE FINE Screw images Recess images 211 22 2 SMALL REVERSE 23 3 4 24 SMALL 4 NIBS HILO 5 25 6 7 1 6 2 7 8 17 REVERSE PZ COARSE PH 9 18 HILO SENCO REDUCE BUGLE DRILL 22 23 24 4 5 DOUBLE PAN FLAT 8 NIBS BUGLE BUGLE FINE REVERSE SQ HILO TORX 6 7 8 19 9 FLAT 15 6 7 18 SMALL 4 NIBS REVERSE 19 Screw point10 imageshead Screw images 9 11 12 8 20 5 6 7 PZ SHARP Size 10 11 12 21 13 22 Material/Finish Head Ø Art.Nr Clear Zinc 8,00-8,50 39N30MC-5 Screw images 3,9 x 42mm Screw thread 1 2 3 images 4 Clear Zinc 6 7 8,00-8,50 9 10 39N42MC-5 11 12 13 8,00-8,50 39N55MC-5 2/3 HILO 5 3,9 x COARSE 55mm Screw head18images 19 17 Screw point images 8 Clear Zinc REVERSE SQ SENCO 14 23 3,9 x 30mm FINE PZ 17 21 14 25 HILO 4 NIBS SMALL 20 DOUBLE BUGLE REVERSE BUGLE COARSE 21 SMALL HILO 22 23 24 251 2 15 22 4 DOUBLE REDUCE DRILL BUGLE 20 5 6 FLAT 4 NIBS T-TAP SMALL 4 NIBS FLAT 2/3 TEK REVERSE HILO PH 2/3 COARSE PZ 2/3 HILO SENCO SQ REDUCE DRILL DRILL SHARP TYPE 17 Screw images 1 2 3 Recess images 23images 24 Screw22thread 21 4 25 5 6 25 3,9 x 25mm 14 15 small Phosphate 3,9 x 55mm Phosphate PH COARSE SENCO11 FINE PZ 9 8 T-TAP 2/3 HILO PZ 325 4 5 WINGED COARSE 4 NIBS SENCO DRILLFLAT 2 24 3 4 25 5 6 10 10 2/3 COARSE FLAT 8 NIBS SQ BUGLE 11 COARSE 12 2/3 HILO TORX 8 Art.Nr 9 FLAT 35B35MP 18 17 SENCO 8,00-8,50 SQ 35B45MP 19 20 TORX 8,00-8,50 39B25MP FLATDOUBLE 8 NIBS SMALL BUGLE REDUCE DRILL DRILL 39B35MP PAN BUGLE 8,00-8,50 8,00-8,50 17 21 T-TAP Screw head images Screw point images SMALL 4 small NIBS SHARP 39B45MP 18 19 20 21 8,00-8,50 39B55MP FLAT REVERSE HILO 2/3 COARSE 12 13 14 15 16 SQ TORX T-TAP 22 23 * 2/3 HILO 2/ Screw point images PAN FLAT 8 NIBS TORX T-TAP WINGED DIAMOND DRILL FINE9 8 6 REVERSE T-TAP SQ 7 REDUCE DRILL DRILL SHARP TYPE 17 small Drywall to heavy steel Recess (up images to 3mm) 7 PAN 2/3 T SENCO TRUSS FLAT UNDERCUT Screw thread images 8,00-8,50 Phosphate 3,9 x 45mm 7 24 2 Material/Finish Head Ø Screw head images FLAT Screw thread images WINGEDHILOPAN REVERSE COARSE DIAMOND FLAT 4 NIBS SMALL 4SHARP NIBS FINE FLATTYPE 17 PH PZ T-TAP DRILL SENCO DRILL SMALL 13 DOUBLE REVERSE REVERSE HILO COARSE FINE PAN HILO FLAT 8BUGLE NIBS SMALL BUGLE WINGED SHARP TYPE 17 DIAMOND DRILL Recess images Screw thread images TRUSS FLAT UNDERCUT 17 18 images 19 Screw point mages 24 2/3 TEK T-TAP TRUSS FLAT Phosphate UNDERCUT FLAT PZ Phosphate PH 3,5 x 45mm 16 23 * 3 23 Screw images 23 1 16 1 23 22 2/3 TEK REVERSE HILO SMALL FLAT 4 NIBS T-TAP SMALL 4 NIBS FLAT SHARP TYPE 17 DIAMOND 3,9 x 35mm WINGED Phosphate DRILL Drywall to woodScrew orimages Recess images Screw point images light steel (up to 1mm) 19 22 2/3 TEK REVE T-TAP Screw thread images Screw head images Recess images * 14 13 TRUSS FLAT UNDERCUT Screw point images Size TRUSS FLAT UNDERCUT 17 Screw head18images mages 12 2/3 TEKTYPE 17 REVERSE FINE DIAMONDPZ SMALL PH SMALL 4HILO NIBS FLAT 21 2/3 COARSE 2/34HILO FLAT NIBS FLAT REDUCE DRILL DRILL 3,5 x 35mm 21 21 FLAT 4 NIBS 2/3 COARSE PH 22 15 16 small 20 HILO 2/3 COARSE DOUBLE BUGLE BUGLET-TAP TORX REDUCE DRILL DRILL 12 Screw images TRUSS FLAT 19 20 UNDERCUT 18 15 24 DOUBLE TORX T-TAP REVERSE COARSE FINESQ BUGLE SMALL BUGLE WINGED TYPE 17 DIAMOND DRILL SENCO DRILL 9 Screw thread images Screw head images 18 19 20 17 crew point images PH EDUCE DRILL 8 20 11 FLAT HILO Recess images 13 DOUBLE 2/3 HILO T-TAP SHARP BUGLE HILO 2/3 SQ REDUCE DRILL DRILL PAN BUGLE FLATCOARSE 8TORX NIBS FLAT 4 21 Recess images small Screw images Recess images 1 2 3 11 2/3 HILO TORX 10 16 SMALL COARSE T-TAP 17 FLAT 5 25 20 Drywall to light steel (up to 1mm) 9 T-TAP 2/3 TEK SENCO WINGED REVERSE COARSE SHARP SMALL 4TYPE PH FINEFLATDIAMOND PZ SMALL FLAT 4 NIBS T-TAP NIBS 17 DRILL SENCO DOUBLE DRILL BUGLE 10 2/3 COARSE SQ small Screwhead pointimages images Screw 19 20 21 19 T-TAP small 3 Screw head images images 10 11 Screw 12 thread 13 14 TRUSS FLAT UNDERCUT Screwimages images Recess Screw2 thread images 1 3 4 18 TORX FLAT Screw images 8 FLAT 4 NIBS PZ2/3 HILO FLAT PH2/3 COARSE 5 25 REVERSE FINE HILO TRUSS FLAT UNDERCUT Screw head images 17 18 19 crew thread images TRUSS FLAT 3 4 UNDERCUT 2 Screw thread images Recess images 23 16 SQ Screw images small thread images sScrewimages ecess SENCO DOUBLE BUGLE 13 REVERSE 2/3 TEK T-TAP SMALL HILO15 14 SMALL 4 NIBS 16 2/3 COARSE FLAT PH 2/3 HILO FLAT 4 NIBS PZ2/3 TEK T-TAP REVERS SENCO REVERSE HILO small FLATScrew Recess images ages Screw thread images Screw head images PH PZ DRILL SizeSHARP 3,9 x 30mm 3,9 images x 40mm Screw thread ecess images 3,9 x COARSE 50mm FINE PH PZ SENCO SQ DOUBLE BUGLE FINE BUGLE TYPE 17 DIAMOND 17 TORX SMALL COARSE WINGED 18 Art.Nr Clear Zinc 39T30MC-5 Clear Zinc Clear Zinc 6,00-6,50 17 18 Screw head images 6,00-6,50 19 20 39T50MC-5 2/3 HILO Screw pointHILO images REVERSE 2/3 COARSE SENCO SQ TORX DOUBLE BUGLE BUGLE REDUCE DRILL DRILL SHARP HILO FLAT 22 DOUBLE BUGLE COARSE SMALL REVERSE SMALL 4 NIBS HILO FLAT 2/3 COARSE REDUCE DRILL DRILL Recess images Screwhead point images Screw images DOUBLE DRILL BUGLE SHARP SMALL 4TYPE SMALL PH NIBS 17 FLAT 4 NIBS PH 2/3 HILO T-TAP PZ2/3 TEK SHARP PANTEK 2/3 DRILL Material/Finish Head Ø T-TAP Phosphate 3,5 x 35mm Phosphate 3,5 x 40mm Phosphate 3,5 x 45mm FLAT 8 NIBS Phosphate SQ WINGED DRILL DOUBLE REVERSE COARSE BUGLE WINGED BUGLE DIAMOND DRILL FINE TYPE 17 SHARP PAN FLAT 8 NIBS HILO SMALL Art.Nr 8,00-8,47 35Q25MP * 8,00-8,48 35Q35MP * 8,00-8,49DOUBLE 35Q40MP * small Screw FLAT head images Screw point images BUGLE SMALL SMALL 4 NIBS BUGLE REDUCE DRILL DRILL SHARP 35Q45MP * 8,00-8,50 TORX T-TAP 3,5 x 25mm Clear Zinc 3,5 x 35mm Clear Zinc 3,5 x 40mm Clear Zinc 3,5 xNIBS 45mm2/3 COARSE Clear HILO T-TAP FLAT 8TORX REVERSE PAN SQ REVERSE HILO FLAT 8 NIBS Screw thread images Screw head images FLAT DRILL 3,5 x 25mm DIAMOND Screw thread images REVERSE COARSE FINE DIAMOND SENCO SQ FLAT 4 NIBS T-TAP WINGED PAN FLATTYPE 17 PZ DRILL SMALL 4 SHARP NIBS PH TRUSS FLAT UNDERCUT FLAT 4 NIBS WINGED FLAT Screw thread images WINGED COARSE FINE 4 NIBS FLAT T-TAP FLATDIAMONDPZ DRILL SENCO T-TAP 2/3 HILO Size PAN REVERSE SENCO HILO TYPE 17 25 DRILL SMALL 25 small 8,00-8,50 35Q25MC-5 Screw8,00-8,50 point images 8,00-8,50 REDUCE DRILL Zinc 2/3 HILO 8,00-8,50 2/3 TEK DRILL 35Q35MC-5 35Q40MC-5 SHARP 35Q45MC-5 REVERSE HILO * TYPE 17 Screw thread images Screw head images crew point images EDUCE DRILL 24 REDUCE DRILL REVERSE HILO SMALLT-TAP SMALL 4 NIBS TYPE 17 DIAMOND Drywall to light steel (up to 1mm) Screw point images REDUCE BUGLE DRILL 23 * 2/3 TEK Recess images Screw head images crew thread images BUGLE FINE FLATCOARSE 4 NIBS 2/3 Screw point images * 21 DOUBLE REDUCE DRILL 23 24 BUGLE 22 small * 39T40MC-5 BUGLE 21 20 T-TAP REVERSE SMALL 4 NIBS Material/Finish Head ØDRILL 6,00-6,50 19 TRUSS FLAT Recess images UNDERCUT Screw point images head images DRILL SHARP Size FINE TYPE 17 DOUBLE REVERSE COARSE BUGLE WINGED BUGLE DIAMOND DRILL Art.Nr HILO SMALL 2/3 COARSE SMALL 4 NIBS 2/3 HILO FLAT 2/34TEK FLAT NIBS REVERSE T-TAPHILO PAN FLAT 8 NIBS Material/Finish Head Ø 3,5 x 25mm Clear Zinc 8,00-8,50 35P25MC-5 3,5 x 40mm Clear Zinc 8,00-8,50 35P40MC-5 * Screw head images Screw point images BUGLE DOUBLE SMALL SMALL 4 NIBS BUGLE REDUCE DRILL DRILL SHARP FLAT FLAT 4 NIBS T-TAP TYPE 17 DIAMOND WINGED DRILL PAN FLAT 8 NIBS Think fast, think senco duraspin. Screw point images REDUCE DRILL DRILL SHARP TYPE 17 DIAMOND WINGED DRILL 11 sma small FLAT Recess images 17 PH 18 PZ 19 20 22 17 21 SENCO SQ 18 23 19 24 TORX 20 25 TRUSS FLAT UNDERCUT TRUSS FLAT UNDERCUT 1 2 22 23 3 244 PH T-TAP 5 25 6 PZ 7 17 REVERSE SENCO 18 HILO SQ 20 1 2 21 22 3 23 4 24 6 5 25 7 8 9 10 17 12 11 HILO 18 13 1 FINE 3 BUGLE 4 COARSE 2 5 PH REVERSE 6 19 14 20 15 2/3 COARSE T-TAP TORX T-TAP FINE 2/3 TEK14 PZ 13 TORX 21 16 22 2/3 HILO 23 2/3 TEK small TRUSS FLAT UNDERCUT Gypsum fiber board to wood or light steel (up to 1mm) Screw images Screw head images Screw thread images 17 3 18 1 2 4 5 FLAT 4 NIBS FLAT 9 10 PH 11 2/3 COARSE 2/3 SENCO SQ HILO12 SMALL 4 NIBS PZ7 HILO 8 14 T-TAP FLAT Drywall to wood Recessor images light steel (up to 1mm) 13 TORX small Screw head imagesRecess images Screw thread images Screw BUGLE imagesDOUBLE SMALL 12 small REVERSE SQ COARSE SENCO FINE HILO REVERSE PZ 2/3 HILO 2/3 TEK T-TAP PH 11 FLAT Recess images Screw thread images Screw images 19 2/3 COARSE TORX 10 SQ collated screws COARSE PZ 9 TRUSS FLAT UNDERCUT FLAT FINE PH 8 SENCO small Screwimages thread images Recess FLAT Recess images Screw images 21 19 20 6 DOUBLE BUGLE PAN FLAT 8 NIBS BUGLE 15 REVERSE COARSE REVERSE HILO16 SENCO SQ T-TAP 21 7 22 8 SMALL HILO TORX 23 9 10 24 SMALL 4 NIBS 2/3 COARSE T-TAP 11 25 12 13 14 FLAT 4 NIBS 2/3 TEK FLAT 2/3 HILO 15 T-TAP REVERSE HILO small TRUSS FLAT UNDERCUT Recess images Screwhead pointimages images Screw thread images Screw REDUCE BUGLE6 DRILL 5 7 DOUBLE DRILL BUGLE8 Screw thread images Screw head images Screw point images 17 18 19 WINGED COARSE FINE REVERSE HILO154 NIBS COARSE FINE 2/3 COARSE BUGLE SHARP FLAT T-TAP PH PZ SMALL NIBS FLATDIAMOND 9 SMALL 10 11 4TYPE 1217 13 14 16 SENCO DRILL 20 21 22 FLA Screw imagesRecess images 23 1 24 25 2 3 4 5 6 7 8 9 10 DOUBLE REVERSE HILO COARSE 2/3 TEK4 NIBS REVERSE HILO WINGEDSENCO 2/3 SQ HILO 2/3 SMALL TEK REVERSE HILO FLAT PAN DIAMOND REDUCE DRILL DRILL2/3 PH PZ T-TAP PAN TORX T-TAP FLAT 8 NIBS SMALL 4SHARP NIBS 2/3 HILO FLATTYPE 17 DRILL BUGLE FLATS sm Screw images 1 17 18 REDUCE DRILL 19 DRILL Size Material/Finish Head Ø Art.Nr 3,9 x 25mm Phosphate 39S25MP 3,9 x 35mm Phosphate 8,00-8,45 TRUSS FLAT 8,00-8,50 Screw head images UNDERCUT 21 22 23 Phosphate 24 PH 25 Phosphate 10 FLAT TRUSS FLAT 11 12 UNDERCUT 24 25 3,9 images x 40mm Screw thread Clear Zinc 6,00-6,50 39U40MC-5 3,9 x 50mm Clear Zinc 6,00-6,50 39U50MC-5 2/3 HILO * Clear Zinc FLAT PZ 32mm SENCO Clear Zinc SQ 8,00-8,50 3,9 x 35mm Clear Zinc 8,00-8,50 DRILL 3,9 x 40mm Clear Zinc 8,00-8,50 Clear Zinc 8,00-8,50 17 Clear Zinc REVERSE TORX 18 17 18 19 20 21 39U30MC-5 Screw head20images21 19 22 23 DOUBLE BUGLE SMALL BUGLE REVERSE 2/3 PZ 23 HILO WINGED 21 22 24 SENCO 25COARSE DIAMOND DRILL COARSETYPE 19 20PH17 18SHARP 23 251 TRUSS FLAT UNDERCUT small 3 4 5 20 BUGLE 39S50MC-5 T-TAP TYPE 17 FLA 1 * 2 3 TRUSS FLAT Recess images UNDERCUT images Screw point images Screw head imagesScrew thread 39S42MC-5 2/3 COARSE 2 25 Screw images 39S40MC-5 19 24 * 2/3 TEK SMALL 4 NIBS SMALL Screw images 24 * FLAT 4 NIBS SMALL 4 NIBS FLAT 2/3 HILO DRILL TORX 2/3 TEK REVERSE HILO SQ T-TAP REDUCE DRILL SHARP 39S35MC-5 small 18 22 * FLAT TRUSS FLAT UNDERCUT FINE 17 HILO Art.Nr small Screw head images hard fiber to wood or * Recess images 39S25MC-5 Screw thread images Screw point images light steel (up to 1mm) 39S30MC-5 * TORX 39S32MC-5 T-TAP 8,00-8,50 HILO 17 FLAT 8,00-8,50 REDUCE DRILL REVERSE FLAT 8 NIBST-TAP 16 * * 14 Screw thread images 23 6,00-6,50 * Screw8,00-8,50 point images 13 Clear Zinc 39S45MP 3,9 x 30mm COARSE SQ 9 Material/Finish Head Ø 39S55MP Clear Zinc 3,9 x 50mm 22 8 3,9 x 30mm 8,00-8,48 3,9 images x 42mm Screw thread FINE SENCO 21 7 Size 8,00-8,48 3,9 x 25mm 3,9 x 20 6 * small Recess images 5 DOUBLE REVERSE HILO COARSE FINE 2/3 COARSE FLAT T-TAP PAN NIBS SMALL 4 NIBS 3 BUGLE 4 5 SMALL 6 7 8 9 FLAT 10 114 NIBS 12 13 14 15BUGLE 16 FLAT 8 BUGLE WINGED WINGED SENCO SQ TORX T-TAP REDUCE DRILL DRILL TYPE 17 DIAMOND TYPE 17 PH DIAMOND PZ SHARP DRILL DRILL BUGLE 1 2 SHARP REDUCE DRILL DRILL 3,9 x 45mm Phosphate 3,9 x 55mm 39S35MP Recess images Screw point images Screw imagesDOUBLE 39S40MP 8,00-8,47 Screw point images 20 4 DOUBLE COARSE FINESQ HILO REVERSE HILO COARSE FINE 2/3T-TAP COARSE 2/3 2/3 TEK REVERSE PH PZ SENCO 21 22 23 25 4 NIBS BUGLE SMALL 48 NIBS T-TAP PAN TORX SMALL 24 SMALL FLAT 4 NIBS6 PANHILO 10 FLAT FLAT NIBS SMALL FLAT FLAT 1 2 3 4 5 7 4 NIBS 8 9 11 12 13 14WINGED15 BUGLE BUGLE WINGED REDUCE DRILL DRILL SHARP TYPE 17 DIAMOND TYPE 17 DIAMOND DRILL DRILL BUGLE 20 SHARP 3,9 x 40mm 3 TRUSS FLAT Recess images UNDERCUT Screw thread images Screw head images 19 Screw point17images 18 Screw images DOUBLE Screw head images Screw point images 2 4 5 6 7 8 FLAT DOUBLE REVERSE FLATSHARP COARSE FINE23 SMALL 2/3 HILO 2/3SQ TEK 22 24 DRILL 25 TYPE2/3 17 REDUCE PH HILO PZ COARSE SENCO TO FLAT 4 NIBS T-TAPDIAMOND PAN WINGED 8 NIBS REVERSE SMALL 4DRILL NIBS sma DRILL FLAT BUGLE * 2/3 TEK REVERSE HILO 21 2/3 HILO T-TAP Recess images small Screw head PH images Screw point images Gypsum fiber board Recess images to light steel (up to 1mm) Screw head images DOUBLE BUGLE HILO BUGLE REVERSE SMALL 2/3 COARSE SMALL 4 NIBS 2/3 HILO REDUCE DRILL FLAT 4 NIBS PH REVERSE HILO FLAT 2/3 TEK DOUBLE SMALL BUGLE TYPE 17 FLAT 8 NIBS Size SQ BUGLE DRILL T-TAP PZ 3,9 images x 30mm Screw thread Clear Zinc 3,9 x COARSE 45mm Clear Zinc REVERSE 2 FLATSHARP 3 4 TYPE 17 PH FLAT 4 NIBS Screw thread images 5 6 7 T-TAPDIAMONDPZ FINEPAN REDUCE 8 9 10 DRILL WINGED SENCO SQ REVERSE FLAT 8 NIBS DRILLCOARSE DRILL 12 11 HILOTORX 17 17 HILO 19 HILO T-TAP 2/3 PAN COARSE Art.Nr 39JS30MC 18 19 20 6,70-7,00 2/3 COARSE 39JS45MC 2/3 HILO * 21 22 * 2/3 TEK DOUBLE SMALL SMALL 4 NIBS BUGLE WINGED DIAMOND DRILL 2/3 HILO 2/3 TEK REVERSE HILO BUGLE TYPE1617 15 T-TAP 2/3 COARSE 20 T-TAP REVERSE FLAT 4 NIBS 6,70-7,00 small 18 TORX COARSE FLAT WINGED DRILL Screw head images SHARP 14 13 SQ Material/Finish Head Ø TORX T-TAP Screw point images Recess images Screw images 1 REDUCE DRILL SMALL SMALL 4DRILL NIBS FINE 4 NIBS SMALL DIAMOND SHARP PAN SENCO FINE Screw point images ScrewSENCO thread FLAT images PZ Hard fiber board Recess images to light steel (up to 1mm) 23 FLAT Screw head images DOUBLE BUGLE BUGLE SMALL Screw thread images Screw head images SHARP TYPE 17 Size COARSE BUGLE FINE WINGED DRILL DIAMOND Material/Finish Head Ø Art.Nr Phosphate 6,70-7,00 39J30MP 3,9 x 45mm Phosphate 6,70-7,00 39J45MP 17 18 HILO SMALL 2/3 COARSE SMALL 4 NIBS 2/3 HILO FLAT DOUBLE SMALL BUGLE REDUCE DRILL DRILL 24 SHARP REVERSE T-TAP HILO SHARP TYPE 17 PH T-TAP PZ TYPE 17 PAN Recess images FLAT REDUCE DRILL TRUSS DRILL UNDERCUT FLAT 4 NIBS PH FLAT DRILL 2/34TEK FLAT NIBS Screw point images Screw head images Screw point images 19 20 21 22 23 BUGLE REDUCE DRILL DOUBLE REVERSE BUGLE 3,9 x 30mm SMALL 4 NIBS Screw point images S DIAMOND FLAT 8 NIBS Screw thread images FINE DIAMONDPZ WINGED COARSE DRILL SENCO REVER S 25 SMALL 4 NIBS SHARP FLAT FLAT 4 NIBS T-TAP TYPE 17 DIAMOND WINGED DRILL PAN FLAT 8 NIBS Screw thread images Screw head images COARSE BUGLE FINE Size Screw point images REDUCE DRILL DRILL FLAT SHARP TYPE 17 Material/Finish Head Ø DOUBLE REVERSE BUGLE 4,2 x 35mm WINGED Phosphate 7,40-7,80 42UM35MP 4,2 x 38mm 7,40-7,80 42UM38MP DIAMOND DRILL Phosphate small HILO SMALL Art.Nr * Screw head images Screw point images BUGLE DOUBLE SMALL BUGLE REDUCE DRILL DRILL SMALL 4 NIBS SHAR Recess images PH PZ SENCO SQ TORX T-TAP Screw point images REDUCE DRILL 12 Screw thread images FINE COARSE REVERSE HILO 2/3 COARSE 2/3 HILO 2/3 TEK REVERSE HILO DRILL SHARP TYPE 17 small small TRUSS FLAT UNDERCUT FLAT s PZ SENCO SQ 18 19 TORX 20 21 22 23 24 T-TAP 17 25 PH PZ SENCO small images REVERSE SQ HILO TORX 18 2/3 COARSE T-TAP SQ 19 20 2/3 HILO PH 21 2/3 TEK PZ 22 23 24 25 FINE COARSE SQ 17 REVERSE TORX 19 20 21 T-TAP FLAT Screw thread images REVERSE HILO SENCO 18 TORX small TRUSS FLAT UNDERCUT Recess images 17 COARSE FLAT Recess images 17 18 HILO T-TAP 19 20 2/3 COARSE 21 22 2/3 HILO 23 2 2/3 TEK REVE small FLAT mages esDOUBLE 5 SMALL 6 HILO images Flooring wood to woodRecess (Chipboard) Recess images Screw images General Wood tothread wood SMALL 4 NIBS 7 8 2/3 COARSE 2/3 HILO 3 BUGLE 4 9 FLAT114 NIBS 12 HILO FINE PH REVERSE FLAT 10 2/3 TEK T-TAP 13 COARSE PZ PAN 15 REVERSE SENCO 14 16 FLAT Screw head images Screw imagesDOUBLE BUGLE 8 NIBS 1 HILO SQ 2 5 SMALL 6 3 BUGLE 4 2/3 COARSE TORX FLAT114 NIBS12 FLAT 10 REVERSE HILO PH SMALL 4 NIBS 7 8 2/3 TEK 2/3 HILO T-TAP T-TAP 13 PZ 9 PAN 15 SENCO 14 small Recess images Screw Screw threadhead images images Screw images mages 7 8 DRILL MALL 4 NIBS 9 10 SHARP FLAT 12 FLAT114TYPE NIBS17 13 14 PH DIAMOND T-TAP Recess images Screw point images 1 WINGED 2 16 3DOUBLE COARSE FINE 15 PAN FLAT 8 NIBS4 BUGLE DRILL PZ BUGLE 5 SMALL 6 REVERSE SENCO 7SQ 8 DRILL 10 HILO 2/3 9COARSE TORX REDUCE DRILL SMALL 4 NIBS FLAT 12 2/3 HILO SHARP FLAT11 4T-TAP NIBS TRUSS FLAT UNDERCUT 8 22 20 2 1 23 Size 321 17 18 19 21 TEK DOUBLE 3 4 20 5 2/3 9 10 11SMALL12 13HILO 14 151COARSE REVERSE COARSE 2/3 2/34HILO FLAT NIBS T-TAP 6 SMALL 4 NIBS FLAT 2 16 BUGLE WINGED REDUCE DRILL DRILL SHARP TYPE 17 DIAMOND DRILL Clear Zinc 8,00-8,50 40K25MC 4,0 x 30mm ClearTRUSS Zinc FLAT UNDERCUT 8,00-8,50 40K30MC 4,0 x 35mm Clear Zinc 4,0 x 40mm Clear Zinc 4,0 x 45mm Clear Zinc 25 4,0 x 50mm Clear Zinc 4,0 x 55mm Clear Zinc PZ 19 SENCO 20 Zinc21 Clear SQ Screw thread images Screw head images Screw images 25 7FINE 8 BUGLE 4,0 x 25mm 18 4,0 x 60mm COARSE 6 24 Art.Nr 17 images 523 WINGED DRILL Material/Finish Head Ø 24 s 422 DIAMOND Screw head images Screwimages point images Screw 8,00-8,50 40K35MC 1 2 BUGLE 3DOUBLE4 17 BUGLE18 REDUCE DRILL 8,00-8,50 5 SMALL 6 19 20 40K45MC 8,00-8,50 40K50MC FLAT Screw8,00-8,50 point images 40K55MC 23 24 8,00-8,50 25 40K60MC 22 REDUCE DRILL TORX FLAT DRILL 40K40MC SHARP 8,00-8,50 DRILL small 4,0 x 25mm Clear Zinc 8,00-8,50 40H25MC * 4,0 x 30mm ClearTRUSS ZincFLAT UNDERCUT 8,00-8,50 40H30MC * * Screw images 4,0 x 35mm 1 8 NIBS 22 2 FLAT 23 103 24 4 4 NIBS12 5 FLAT11 25 Clear Zinc 8,00-8,50 40H45MC * 4,0 x 50mm Clear Zinc 8,00-8,50 40H50MC 4,0 x 55mm Clear Zinc * Recess images TYPE 17 PH DIAMOND PZ DRILL 4,2 x 25mm 4,2 x 30mm 4,2 x 35mm Yellow Zinc Yellow Zinc2/3 COARSE 8,00-8,50 HILO 2/3 HILO T-TAP PH 42K45MY 2/3 TEK FLAT 22 23 REVERSE HILO SENCO PZ 18 25 24 FINE SQ 40H55MC 23 24 8,00-8,50 25 40H60MC 22 REDUCE DRILL SQ 20 4,2 x COARSE 45mm TORX 21 Yellow REVERSE T-TAP 23 HILO SMALL 4 NIBS 15 SHARP * small * TRUSS FLAT UNDERCUT * SHARP * T-TAP 8,00-8,50 42H25MY TRUSS FLAT* 42H30MY UNDERCUT 24 FLAT 14 8,00-8,50 8,00-8,50 22 Zinc DRILL TORX small Zinc Yellow Zinc 19 SMALL FLAT Screw 8,00-8,50 point images Yellow Zinc TRUSS FLAT Yellow UNDERCUT 4,2images x 35mm Screw thread 17 SENCO FLAT 8 NIBS BUGLE 13 DRILL DRILL 8,00-8,50 REDUCE40H40MC 18 19 20 21 4,0 x 60mm WINGED Clear Zinc 17 42K30MY TORX 815 PAN BUGLE 4,0 x 45mm TYPE 17 42K25MY 4,2 xREVERSE 45mm 8,00-8,50 40H35MC DOUBLE 9 16 10 11 12 * 9 8,00-8,50 SQ Screw head images Screw point images T-TAP WINGED DRILLClear Zinc * * 21 Clear Zinc 6 7 13 14 DIAMOND 4,0 x 40mm 7 SMALL 214 8,00-8,50 20 13HILO SMALL14 * Yellow Zinc 19 11DOUBLE 12 REVERSE BUGLE * Yellow Zinc 18 25 9 10 COARSE FLAT 8BUGLE NIBS Art.Nr 4,2 x 30mm 8,00-8,50 Recess images42K35MY 23 24 7FINE REVERSE PAN 8HILO Material/Finish Head Ø 4,2 x 25mm 17 22 Size TRUSS FLAT UNDERCUT SHARP T-TAP small REVERSE SQ TRUSS FLAT UNDERCUT Screw thread images Screw head images Screw point images Screw images 19 TYPE 17 Screw thread images WINGED 13 15 16PZ COARSE FINE 2/3 TEKTYPE14 REVERSE HILO 17 DIAMOND PH T-TAP PAN FLAT 8 NIBS DRILL SENCO TYPE 17 * 42H35MY FL * 25 8,00-8,50 2/3 COARSE 42H45MY 2/3 HILO * 2/3 TEK REVE sm small FLAT FLAT magesRecess images DOUBLE BUGLE HILO Screw thread images Wood to wood (Chipboard) PH SMALL SMALL 4 NIBS 2/3 COARSE PZ 2/3 HILO FLAT 2/3 TEK SENCO FLAT 4 NIBS REVERSE HILO FINE SQ T-TAP COARSE TORX Screw head images images Recess PAN REVERSE T-TAP FLAT 8 NIBS BUGLE HILO PH Flooring wood to wood DOUBLE BUGLE 2/3 COARSE PZ SMALL 2/3 HILO SMALL 4 NIBS 2/3 TEK SENCO FLAT 4 NIBS FLAT REVERSE HILO SQ TORX T-TAP T-TAP small small MALLDRILL 4 NIBS FINE WINGED DOUBLE REVERSE 2/3PZ COARSE DIAMOND SHARP COARSE FLAT 4TYPE NIBS17 T-TAP FLAT 8 NIBS BUGLE PHHILO PAN FLAT DRILL BUGLE BUGLE Size DOUBLE BUGLE DIAMOND 2/3 HILO SMALL SENCO SMALL WINGED DRILL COARSE FINE 4 NIBS SMALL FLAT REDUCE DRILL REVERSE HILO FLAT 4 NIBS T-TAP DRILL SHARP Art.Nr 4,2 x 35mm Yellow Zinc 8,00-8,50 42KS35MY * 4,2 x 40mm Yellow Zinc 8,00-8,50 42KS40MY * 8,00-8,50DOUBLE 42KS45MY * Screw point images Yellow Zinc REDUCE DRILL DRILL 4,2 x 50mm YellowSHARP Zinc Screw head images DOUBLE COARSE FINE 2/3 COARSE HILOREVERSE SMALL 2/3 TEK BUGLE PAN FLAT2/3 8 NIBS BUGLE WINGED TYPE 17 DIAMOND DRILL HILO 2/3 COARSE REVERSE HILO SMALL 4 NIBS FLAT 2/3FLAT HILO4 NIBS 2/3 TEK T-TAP Size Material/Finish Head Ø Art.Nr 4,5 x 75mm Yellow Zinc 45F75MY 8,00-8,50 T-TAP WINGED DRILL PAN Screw point images Screw point images DRILL REVERS Screw head images Screw point images DOUBLE BUGLE SMALL FLAT 4 NIBS SMALL T-TAP SMALL 4 NIBS PAN FLAT 8 NIBSFLAT 4 NIBS FLAT SMALL 4 NIBS BUGLEFLAT BUGLE BUGLE REDUCE DRILL DRILL SHARP TYPE 17 DIAMOND TYPE 17 DIAMOND 8,00-8,50 42KS50MYWINGED DRILL * REDUCE DRILL 2/3 TEK Screw thread Screwimages head images Material/Finish Head Ø 4,2 x 45mm WINGED REVERSE FINE FLAT 2/3 COARSE 2/3 HILO 2/3 TEK REVERSE HILO PH PZ COARSE SENCO SQHILO PANDIAMOND TORX SHARP TYPE 17 REDUCE DRILL DRILL FLAT 4T-TAP NIBS T-TAP SQ TORX FLAT 8 NIBS SMALL 4 NIBS DRILL T-TAP Screw thread images Screw point images Screw head images TYPE 17 Recess images ScrewScrew point thread images images Recess images Screw head images mages Screw thread images PAN SHARP REDUCE DRILL TYPE 17 DIAMOND DRILL WINGED SHARP DRILL TYPE 17 DIAMOND WINGED DRILL Think fast, think senco duraspin. 13 images Recess 2 3 4images 5 FLAT 6 17 7 18 PH 8 19 9 20 PZ 10 21 11 22 SENCO Recess images 13 14 12 23 24 18 FINE SQ SQ 15 1 16 2 3 17 PH TORX 18 4 PZ T-TAP 5 18 6 19 20 SENCO 9 20 19 COARSE TORX 10 21 T-TAP TRUSS FLAT UNDERCUT 11 22 12 23 REVERSE 13 24 7 8 9 10 11 21 22 23 24 25 SQ TORX HILO 5 6 Screw head imagesRecess images Screw thread images Flooring wood to wood 422 DOUBLE BUGLE 2/3 HILO 523 6 24 SMALL PZ 2/3 TEK 25 7 8 9 SMALL 4 NIBS REVERSE HILO SENCO 10 11 8 1 25 2 9 11 2/3 COARSE TORX SQ 12 17 2/3 HILO Screw images 19 15 1 SMALL PAN REVERSE 13 T-TAP 14 18 5 6 7 8 2/3 TEK 15 16 20 9 17 18 19 Screw thread Screwimages head images 20 21 PZ SENCO SQ FINE BUGLE COARSE DOUBLE REVERSE SMALL BUGLE WINGED DIAMOND DRILL 22 23 321 422 523 6 24 25 7 FLAT 4 NIBS FLAT 2/3 COARSE 2/3 HILO SENCO SQ 8 9 10 T-TAP 2/3 TORXTEK 10 1 11 2 23 12 3 24 13 4 25 11 12 8 WINGED REVERSEFLAT COARSE FINE 2/3 COARSE 2/3 TEK HILO DIAMOND HILO SHARP REVERSE TYPE 17 SMALL FLAT 4 NIBS T-TAP SMALL 4 NIBS DRILLPH Material/Finish Head Ø 4,5 x 60mm Yellow Zinc 9 10 2/3 PAN PZ HILO 11 read images 4,5 x 65mm Screw head images Screw point images COARSE 4,5 xREVERSE 70mm SENCO DOUBLE BUGLE BUGLE REDUCE DRILL Yellow Zinc SQ SMALL DRILL 17 Screw head images Art.Nr 17 45X60MY 8,00-8,50 18 TORX T-TAP SMALL 4 NIBS FLAT SHARP TYPE 17 FLAT Recess images Screw 45X65MY * thread images 19 18 19 SENCO FLATSMALL 8 NIBS TYPE 17 Size small HILO 2/3 HILO Yellow Zinc2/3 COARSE8,00-8,50 20 21 2/3 TEK 45X70MY FLAT 4 PH NIBS DIAMOND 12 2/3 TEK FLAT 8 NIBS REVERSES SENCO 22 23 TRUSS FLAT UNDERCUT FLAT Recess images 25 8,00-8,50 1 small Screw point images TORX T-TAP PH PZ HILO 2/3 COARSE 2/3FLAT HILO4 NIBS 2/3 TEK HILO BUGLE REVERSE DOUBLE T-TAP PAN SMALL 4 NIBS FLAT BUGLE REDUCE DRILL DRILL SHARP Size 13 FLAT 15 6 16 Recess images 7 14 5 23 PAN FLAT 8 NIBS REVERSE HILO T-TAP TRUSS FLAT UNDERCUT 24 22 small small FLAT 21 REVERSE HILO TRUSS FLAT UNDERCUT 17 point 18 19 20 21 22 thread images Screw Screw head images images Screw WINGED DOUBLE REVERSEPANTYPE 17 FINE 2/3 COARSE 2/3 HILO REDUCE DRILL DRILL REDUCE DRILL SHARP DIAMOND PH PZ COARSET-TAP SENCO SQHILO TORX T-TAP FLAT 4 DRILL NIBS FLAT 8 NIBS BUGLE FLAT DRILL BUGLE 19 Flooring wood to wood 20 2 16 FLAT 8 4 NIBS SMALL NIBS HILO PZ Screw images 4 16 TRUSS FLAT UNDERCUT FLAT 3 15 FLAT 10 HILO Screw images 24 14 small small TRUSS FLAT UNDERCUT Recess images 20 21 22 23 ScrewScrew point thread images images 18 14 DOUBLE T-TAP BUGLE COARSE T-TAP PH FLATBUGLE 4 NIBS FINE TORX FLAT SQ 17 13 12 13 T-TAP small FLAT Screw images 19 head 202 1 321 Screw Recess images BUGLE 2/3 COARSEPH 7 REVERSE REVERSE HILO SENCO COARSE 2/3 TEK PZ FINE 2/3 HILO PH 2/3 COARSE 12 TRUSS FLAT UNDERCUT FLAT Screw images Screw thread images 15 1 Recess images 2 16 3 4 14 25 mages 21 SQ SMALL 4 NIBS DIAMOND 18 images4,2 xREVERSE REVERSE HILO point COARSE FINE *Screw 55mm T-TAP PZ PAN SENCOFLAT 8 NIBS SQ WINGED REDUCE DRILL DRILL SHARP DRILL small 22 23 24 Screw thread images TORX FINE FLAT WINGED DRILL Zinc Yellow Zinc20 19 REVERSE T-TAP small 7,00-7,50 42Z35MY 7,00-7,50 42Z45MY 24 25 21 22 23 Screw head images 2/3 TEK 42Z55MY DOUBLE BUGLE WINGED DRILL T-TAP BUGLE DIAMOND HILO PAN Art.Nr HILO 2/3 HILO Yellow Zinc2/3 COARSE 7,00-7,50 TORX TYPE 17 25 T-TAP COARSE FLAT 4 NIBS Material/Finish Head Ø TRUSS FLAT UNDERCUT Yellow 4,2 x 35mm 4,2 x 45mm 25 17 24 20 SMALL * TRUSS UNDE * REVERSE HILO SMALL 4 NIBS FLAT ead imagesRecess images Screw head imagesRecess images Screw thread images Flooring Wood to wood (medium) DOUBLE Screw point images SMALL BUGLE REVERSE HILO PH REDUCE DRILL SMALL 4 NIBS PZ2/3 COARSE DRILL SHARP FLAT 2/3 HILO SENCO TYPE 17 FLAT 4 NIBS 2/3 TEK SQ DIAMOND T-TAP REVERSE TORX HILO FINE WINGED DRILL PAN BUGLE T-TAP COARSE FLAT 8DOUBLE NIBS BUGLE REVERSE PH SMALL HILO Flooring wood to wood Screw point images SMALL 4 NIBS PZ2/3 COARSE FLAT 4 NIBS FLAT 2/3 HILO 2/3 TEK SENCO SQ REDUCE DRILL DRILL T-TAP REVERSE TORX HILO SHARP PAN FLAT T-TAP TYPE 17 small Recess images int images Screw thread images ILL FLAT TRUSS FLAT UNDERCUT S 7 Screw images collated screws Screw6 thread 7 images 8 17 small 25 small 5 small TRUSS FLAT UNDERCUT DRILL SMALL REVERSE FINE 2/3 COARSE TYPE 17 FLAT 4DIAMOND NIBS PHHILO T-TAPWINGED SMALL SHARP 4 NIBSCOARSEFLAT BUGLE DRILL PZ PAN Screw thread images Screw head images SHARP BUGLE DOUBLE BUGLE TYPE 17 SMALL DIAMOND FINE 4 NIBS SMALL WINGED DRILL COARSE FLAT DOUBLE 2/3 HILO 2/3 SQ TEK HILO FLAT 8 NIBS DRILL SENCO TORX T-TAP REVERSE HILO T-TAP WINGED FINE 2/3 COARSE TYPEPZ 17 REDUCE DRILL REVERSE SHARP SMALL FLAT 4 DIAMOND NIBSSENCO PAN SMALL 4PH NIBSCOARSEFLAT DRILL SQ BUGLE 2/3 HILO TORX FLAT 8 NIBS REVERSE HILO FLAT 4 NIBS T-TAP REDUCE DRILL DRILL DOUBLE 2/3 COARSE FINE HILO COARSE 2/3 TEK PAN FLAT2/3 8 NIBS BUGLE SMALL BUGLE SHARP TYPE 17 DIAMOND REVERSE HILO REVERSE SMALL 4 NIBS WINGED DRILL HILO FLAT 2/3FLAT COARSE 4 NIBS 2/3 HILO T-TAP Size Material/Finish Head Ø Art.Nr Yellow Zinc 7,00-7,50 42R25MY * 4,2 x 35mm Yellow Zinc 7,00-7,50 42RH35MY * 4,2 x 35mm Yellow Zinc 7,00-7,50 42R35MY * 4,2 x 40mm Yellow Zinc 7,00-7,50 42RH40MY * 7,00-7,50DOUBLE 42R40MY * 4,2 x 45mm Yellow Zinc DOUBLE 7,00-7,50 42RH45MY Size 4,2 x 40mm REDUCE DRILL DRILL 4,2 x 45mm Material/Finish Head Ø Art.Nr Screw head images Yellow Zinc Screw head images Screw point images BUGLE SMALL SMALL 4 NIBS BUGLE WINGED TYPE 17 DIAMOND 7,00-7,50 42R45MY DRILL YellowSHARP Zinc FLAT 4 NIBS FLAT BUGLE REDUCE DRILL DRILL 4,2 x 50mm T-TAP BUGLE YellowSHARP Zinc PAN SMALL FLAT NIBS FLAT 4 NIBS SMALL 48 NIBS FLAT TYPE 17 DIAMOND 7,00-7,50 42RH50MYWINGED DRILL * 4,2 x 50mm Yellow Zinc 7,00-7,50 42R50MY 4,2 x 55mm Yellow Zinc 7,00-7,50 42RH55MY * 4,2 x 55mm Yellow Zinc 7,00-7,50 42R55MY * 4,5 x 65mm Yellow Zinc 7,00-7,50 45RH65MY * 4,5 x 75mm Yellow Zinc Screw 7,00-7,50 point images 45R75MY * 4,5Screw x 75mm Yellow Zinc point images 7,00-7,50 45RH75MY * 4,2 x 40mm Ruspurt II 4,2 x 50mm Ruspurt II 4,2 x 55mm Ruspurt II 4,5 x 50mm REDUCE DRILL DRILL SHARP TYPE 17 WINGED DIAMONDREDUCE DRILL DRILL 42R40MR * 7,00-7,50 42R50MR * 4,2 x 50mm 7,00-7,50 42R55MR * 4,2 x 55mm Ruspurt II 7,00-7,50 45R50MR * 4,5 x 55mm Ruspurt II 7,00-7,50 45R55MR 4,2 x 50mm Stainless Steel 7,00-7,50 4,2 x 55mm Stainless Steel 7,00-7,50 7,00-7,50 2/3T-T T thread images Screw Screw head images Screw point images 4,2 x 25mm Screw point images 14 Recess images Screw point images Screw thread images Screw head images 4,2 x 40mm DRILL Ruspurt II SHARP TYPE 17 DIAMOND WINGED DRILL 7,00-7,50 42RH40MR * Ruspurt II 7,00-7,50 42RH50MR * Ruspurt II 7,00-7,50 42RH55MR * 4,5 x 65mm Ruspurt II 7,00-7,50 45RH65MR * * 4,5 x 75mm Ruspurt II 7,00-7,50 45RH75MR * 42R50MS * 4,2 x 35mm Stainless Steel 7,00-7,50 42RH35MS * 42R55MS * 4,2 x 40mm Stainless Steel 7,00-7,50 42RH40MS * 4,2 x 45mm Stainless Steel 7,00-7,50 42RH45MS * * 4,2 x 45mm Weatherex II 7,00-7,50 42R45MW * 4,2 x 50mm Stainless Steel 7,00-7,50 42RH50MS 4,5 x 65mm Weatherex II 7,00-7,50 45R65MW * 4,2 x 55mm Stainless Steel 7,00-7,50 42RH55MS 4,5 x 75mm Stainless Steel 7,00-7,50 45RH75MS * small small TRUSS FLAT UNDERCUT es s3 4 5 6 17 7 18 PZ 8 19 9 20 SENCO 13 14 10 21 11 22 SQ 15 12 23 13 24 14 PH T-TAP 17 18 11 12 13 20 3 Recess images 15 16 14 21 Screw images 19 22 HILO4 5 23 6 2/3 COARSE PH Screw thread images 24 17 25 7 2/3 8HILO PZ 9 10 2/3 TEK SENCO 422 523 6 24 SMALL 4 NIBS PZ PH 25 7 8 9 10 FLAT 4 NIBS COARSE SQ FLAT FINE SENCO 11 FINE 12 REVERSE HILO SQ 17 18 13 COARSE14 19 TORX 18 22 6 23 7 24 8 TORX 25 9 10 T-TAP 21 T-TAP 12 13 TRUSS FLAT UNDERCUT 22 23 HILO 11 24 2/3 COARSE FL 25 2/3 HILO 2/3 TEK REVERSE HILO sm 12 DOUBLE FLAT 8 NIBS BUGLE 2/3 COARSEPH BUGLE PAN HILO T-TAP 17 TRUSS FLAT FLAT UNDERCUT Flooring/decking wood Screw images to wood (soft) 18 SMALL 2/3 HILO 19 20 21 22 FLAT 4 NIBS FLAT REVERSE HILO SENCO SQ SMALL 4 NIBS PZ 2/3 TEK 23 1 24 2 T-TAP TORX 3 25 4 PAN 5 FLAT6 8 NIB T-TAP small small FLAT TRUSS FLAT 6 7 19 8 9 Screw head images 20 21 10 22 11 23 UNDERCUT Recess images 14 15 16 thread images Screw point images ScrewScrew images 12 24 13 1 25 2 3 4 5 6 7 8 9 10 11 12 WINGED REVERSEPAN FINE 2/3 COARSE PH PZ COARSET-TAP SENCO SQHILO REDUCE DRILL DRILL REVERSE TYPE 17 DIAMOND FLATHILO 4SHARP NIBS FLAT 8 NIBS T-TAP 2/3 HILO 2/3 TEK SMALL 4 NIBS FLAT DRILLTORX WINGED SMALL TYPE 17 DIAMOND SENCO SQHILO DOUBLE TORX REVERSE BUGLE 2/3 COARSE DRILL BUGLE SHARP PZ COARSE FLAT 20 15 REVERSE 16 Recess images Screw13head images 14 15 16 11 T-TAP REVERSE TORX TRUSS FLAT UNDERCUT Screw images ecess images 1 2 3 4 5 24 25 mages Screw thread images 21 5 SQ small thread images Decking Screw wood to wood SMALL FINE 4 small FLAT Screw images 19 1 20 magesRecess 2 321 images DRILL PH 20 3 FLAT TRUSS FLAT UNDERCUT RUSS FLAT DOUBLE UNDERCUT BUGLE 2 SENCO 16 1 2 REVERSE COARSE 1 PZ TRUSS FLAT UNDERCUT images10 Screw images 18 19 17 25 TORX TRUSS FLAT UNDERCUT FLAT Recess images 15 16 13 14 15 2/3 HILO T-TAP 2/3 TEK small TRUSS FLAT UNDERCUT FLAT s 17 18 19 crew thread small images Screwimages head FINE PZ 20 21 22 Screw images 23 1 Screw point images 24 2 3 25 4 5 T-TAP Material/Finish Head Ø Art.Nr 4,5 x 50mm Stainless Steel 8,00-8,50 UNDERCUT * 45D50MSA Stainless Steel 23 21 22 8,00-8,50 24 25 45D65MSA images 4,5 x 65mm Screw images 17 18 19 20 Screw head images 1 2 3 4 5 Recess images Screw point images COARSE 4,5 xREVERSE 75mm 6 7 8 9 10 11 12 2/3 HILO 2/3 TEK PZ DRILL FINE 17 SHARP COARSE PAN 18 17 18 15 16 17 HILO 2/3 COARSE SMALL 4 NIBS FLAT SENCO SQ 18 19 20 TYPE 17 REVERSE DIAMOND HILO Material/Finish Head Ø Art.Nr Yellow Zinc 8,00-8,50 42Y35MY 4,2 x 40mm Yellow Zinc 8,00-8,50 42Y40MYUNDERCUT * TRUSS FLAT * 19 20 21 PAN T-TAP 21 22 23 24 22 24 Screw images 1 2 3 Recess images 25 BUGLE DRILL REVERSE DOUBLE SHARP BUGLE HILO SMALL TYPE 17 SMALL 4 NIBS DIAMOND 2/3 TEK FLAT 4 NIBS HILO 2/3 COARSE SMALL 4 NIBS FLAT PH Material/Finish Head TYPE Ø 17 SHARP DRILL WINGED FLAT DRILL PH 5 FLAT 4 NIBS PZ 7 8 9 10 11 12 13 14 REDUCE DRILL PANPZ DRILLFLAT 8 NIBS SENCO WINGED REVERSE DRILL COARSE DIAMOND T-TAP FINE TYPE 17 TORX SHARP SQ FLAT 2/3FLAT HILO PZ 4 NIBS Art.Nr DIAMOND 2/3 TEK T-TAP SENCO WINGED DRILL 17 Screw thread images REVERSE HILO PAN SQ FINE small FLAT 8TORX NIBS COARSE Size REVERSE 18 19 Screw head images T-TAP 20 2/3 COARSEBUGLE 2/3 HILODOUBLE 2/3 TEK SMALLREVERS Art.Nr BUGLE HILO Weatherex II 8,00-8,50 42W50MW 4,2 x 13mm Clear Zinc 7,77-8,18 TRUSS FLAT 42OP13MC Weatherex II 8,00-8,50 42W55MW 4,2 x 16mm Clear Zinc 7,77-8,18 42OP16MC 4,5 x 65mm Weatherex II 8,00-8,50 45W65MW 4,2 x 19mm Screw images PANHILO headFLAT 8 NIBS 2/3 COARSE Screw thread images 4,2 x 50mm Yellow Zinc 8,00-8,50 4,2images x 55mm crew point images Screw thread Yellow Zinc Screw head images 8,00-8,50 42W55MY Yellow Zinc 8,00-8,50 BUGLE DOUBLE 45W65MY BUGLE WINGED Yellow Zinc 8,00-8,50 45W75MY 4,5 x 65mm COARSE DRILL 4,5 x 75mm REVERSE SHARP HILO TYPE 17 2/3 COARSE DIAMOND 2/3 HILO DRILL SMALL SMALL 4 NIBS REDUCE FLAT DRILL DRILL 19 DOUBLE BUGLE 20 Clear Zinc 21 22 2/3 HILO SMALL FLATDRILL 4 NIBS UNDERCUT 7,77-8,18 23 24 2/3 TEK 25 REVERSE Screw HILO SMALL 4 NIBS TYPE 17 DIAMOND WINGED DRILL * point images T-TAP DRILL PAN SHARP Recess images Wood to heavy steel (up to 3mm) SMALL SMALL 4 NIBS FLAT Screw point images 2/3 TEK REVERSE HILO REDUCE DRILL DRILL FLAT 4 NIBS T-TAP SHARP PAN TYPE 17 SHARP T-TAP PH 17 TYPE PAN FLAT 8 NIBS PH FINE FLAT SENCO small Screw thread images PZ FLATDIAMOND 8 NIBS SizeCOARSE WINGED SENCO DRILL Screw head images REVERSE HILO Material/Finish 2/3ØCOARSEBUGLE 2/3 HILODOUBLE Head Art.Nr BUGLE Clear Zinc 8,00-8,50 42GS35MC 4,2 x 41mm Clear Zinc 8,00-8,50 42GS41MC 4,2 x 65mm Clear Zinc 8,00-8,50 DOUBLE BUGLE REVERSE COARSE T-TAP FINE TORX SQ 4,2 x 35mm Screw head images BUGLE PZ WINGED DRILL DIAMOND Screw thread images SHARP 42OP19MC FLAT 4 NIBS REDUCE DRILL FLAT Recess images Screw point images REDUCE DRILL 18 BUGLE 42W50MY Screw point images Screw head images DOUBLE BUGLE 17 FLAT COARSE 4 NIBS T-TAP REVERSE DIAMOND TORX T-TAP 45W75MWWINGED DRILL 21 Material/Finish Head Ø 4,2 x 55mm DOUBLE BUGLE SMALL SMALL 4 NIBS FLAT FINE BUGLE DRILL SHARP II TYPE 17 PHREDUCE PZ DRILL SENCO SQ 4,5 x 75mm Weatherex 8,00-8,50 15 Screw thread images 4,2 x 50mm Screw images Recesshead images Screw point images T-TAP SENCO small REVERSE HILO T-TAP PH 6 small Recess images DOUBLE REVERSESMALL COARSEpoint FINE BUGLEScrew images BUGLE WINGED DIAMOND DRILL 4 FLAT Screw images 1 2 3 4 5 6 Recess images Screw point images 2/3 HILO T-TAP 2/ FLAT Steel to steel (up to 3 or 4,4mm) REDUCE DRILL 2/3 HILO 2/3 TEK small D Size REDUCE DRILL 23 Screw point images Screw head images FLAT 8 NIBS 25 PAN TRUSS FLAT UNDERCUT TRUSS FLAT UNDERCUT FLAT 8 NIBS crew thread Screwimages head images BUGLE 21 2/3FLAT HILO4 NIBS 2/3 TEK REVERS T-TAP TORX T-TAP 4,2 smallx 35mm Screw head images 15 16 Screw thread images 14 20 T-TAP TORX WINGED 2/3DRILL COARSE Screw head images WINGED REVERSEPAN FINEFLAT 2/3 COARSE TYPE 17 DIAMOND PZ COARSET-TAP SENCO SQHILO 4SHARP NIBS FLAT 8 NIBS DRILLTORX DOUBLE BUGLE SMALL SMALL 4 NIBS FLAT BUGLE FINE EDUCE DRILL 14 Size FLAT 19 FLAT 4 NIBS FLAT REVERSE HILO SENCO SQ ecess images mages Screw thread images DRILL PH FLAT FLAT 13 Flooring/decking wood to wood (soft) crew point images DOUBLE SMALLthread SMALL 4 NIBS Screw images BUGLE T-TAP TRUSS FLAT REVERSE HILO magesRecess images 2/3 COARSEPH EDUCE DRILL 13 Screw point images 4,2 x 50mm Yellow Zinc 8,00-8,50 42Y50MY * HILO 2/3 COARSE 2/3 HILO 2/3 TEK REVERSE Stainless Steel 8,00-8,50 45D75MSA * HILO 17 18 19 20 21 22 23 24 25 DOUBLE T-TAP BUGLE SMALL FLAT 4 NIBS T-TAP SMALL 4 NIBS FLAT SMALL FLAT 4 NIBS T-TAP PAN FLAT 8 NIBS SMALL 4 NIBS FLAT BUGLE WINGED2/3 HILO HILO DIAMOND COARSE FINE DRILL 2/3 COARSE 4,2 x 55mm YellowSHARP Zinc REVERSETYPE 8,00-8,50 42Y55MY WINGED REDUCE DRILL 17 DRILL SHARP TYPE 17 DIAMOND DRILL DRILL PZ SENCO SQ TORX T-TAP small TORX DOUBLE BUGLE BUGLE REDUCE DRILL PH 2/3 TEK 12 DOUBLE REVERSE SMALL FINE REVERSE HILO BUGLE COARSE PAN FLAT 8BUGLE NIBS WINGED PH PZ DIAMOND DRILL 2/3 TEK T-TAP TYPE 17 Size small FLAT Screw thread 7 8 9images 10 images 11 Screw head images Recess 6 SENCO SQ TORX T-TAP HILO 2/3 COARSE 2/3FLAT HILO4 NIBS BUGLE COARSE DOUBLE REVERSE SMALL SMALL 4 NIBS FLAT BUGLE REDUCE DRILL DRILL SHARP 42GS65MC 2/3 TEKSMALLREVER * * Screw point images SMALL SMALL 4 NIBS FLAT FLAT 4 NIBS REDUCE DRILL T-TAP DRILL PAN SHARP Think fast, think senco duraspin. Screw point images REDUCE DRILL DRILL SHARP TYPE 17 DIAMOND WINGED DRILL 15
Similar documents
Senco Staplers And Stripnailers Catalogue
LxWxH
800-1054x109x175 mm
Weight
3,9 kg
RPM
PREMIUM HOSE REEL
Senco DuraSpin Screwsystem
The DuraSpin Collated Screw Fastening System family is the professional choice for demanding steel framing,
drywall and wood fastening applications. The perfect solution for high productivity crews...