Drapery Heading Systems

Transcription

RCHITECT
’S
BatonA
Draw
System
Drapery Heading Systems
Forand
useConventional
with Ripplefold
and Conventional
Pleats
Ripplefold
Pleats
GUIDE
A
Baton Draw System with Sewn-on Stiffen
Drapery Heading
Systems
Custom Hand Draw System
Ripplefold
There are two headings
that for a variety of commercial
® and institutional applications.
Designed
can be used with the Ideal
various
for motels, hotels, dormitories, etc., where drapery and rod
®
Soft ripple-like folds flow smoothly from
Kirsch Architrac series.
Each
wear present special maintenance problems and costs. Puts baton in
one end of the track to the other. The
system uses a different
pleating
view
of the user.effNo
cords. —
Just
push for
or pull baton to open
ect hidden
is gently tailored
suitable
method to achieve unique
and
commercial
or residential
installations.
and close draperies.
Multi-wheel
masters
will take torque in any
beautiful decorating direction.
effects. Can be
Spaced
carriers
control
drapery
used with conventional fullness.
pleated and Ripplefold®
The custom heading heading
system systems.
®
Features
Ripplefold offers definite
benefits. It is designed for
• Panels can be pressed flat,
Features
Component Parts
Specifications
yet fall into folds.
attractive appearance from
• Stiffener is sewn• and
grommeted
to
• Furnish and install Kir
Headings
are suspended
both inside and outsidedrapery
a
Multi-wheel baton masters
overlap. under the track.
track Series 94003, 94
building — an advantage
to
94008
• Stiffener socket is
over
Nos. 94134 and 94133
• placed
No hooks
or pins.
designers who desire uniformity
master arm.
• Track to be equipped
Use with conventional pleated draperies
• Stackback space is less than conventional draperies.
appropriate compon
in the exterior appearance
• Batonof
is a
attached by a screw
• Draperies easily snap on and off carriers.
heading system selec
through
building. All custom tracks
arethe eyelet and into the
master arm.
• Draperies to be grom
Recommendations
designed for easy installation
eyelet.
• 92900 tooling with 94147 eyelet die
and maintenance.
Recommended where draperies require frequent launderings, such as hospitals
required to grommet drapery.
• Specify 2½', 3', 4', 5' or
and institutions. Draperies have uniform ripple-like appearance inside and outside.
94134
94133
Forsystems.
conventional
Eyelet
hand snap
Note: When drapery pins Left
can hand
cause a safety hazard, useRight
Ripplefold®
Master
Arm
Back side of drapery
Front side of drapery
Nos. 94136 and 94135
Use with Ripplefold heading systems
Conventional
Stiffener
Socket
Pleats
Baton
Familiar pinch-pleated draperies
are attached to slide carriers with
slip-in or pin-on hooks. Draperies
94134made.
can be custom-made or ready
Left hand
To select proper track system
for
Baton
this heading, see chart page 6.
Stiffeners
No. 94145
Overlap stiffener with eyelet
• Can be used with mostFor
track
usesystems.
with conventional pleated
Features
pleated draperies
Masters
No. 9
No. 9
Stiffener
No. 9
For Ripplefold
Masters
No. 9
No. 9
94133
Right hand
Stiffener
No. 9
Refer to Baton Draw Sys
F0337018
draperyunder
trim; use with 94004.
• Headings can be suspended
the track or over the face of it.
No. 94146
• Most familiar of the heading
systems.
Overlap
stiffener with eyelet
For Ripplefold panels.
• Can be tied back for effect.
Eyelet
Supplied with stiffeners
Toll-free 800 • 453 • 7273
www.drape.com
3
ARCHITECT’S Drapery Heading System
ARCHITECT
’S System
RCHITECT
’S
Baton
Draw
Drapery
Heading
System
Ripplefold A
GUIDE
Ripplefold andG
Conventional
Ripplefold
Pleats
GUIDE
UIDE
®
®
®
Ripplefold
® Drapery Heading System
h Sewn-on
Ripplefold
Stiffener
Drapery Heading System
An unbroken flow of softly rippled folds. Gently disciplined,
An
unbroken
flow ofsosoftly
rippledcan
folds.
Gently disciplined,
uniquely
fabricated
the panels
be pressed
flat yet
uniquely
fabricated
so
the
panels
can
be
pressed
flat yet
automatically fall into folds. Suitable for either commercial
or
l applications.
automatically
fall
into
folds.
Suitable
for
either
commercial
installations. Folds are identically beautiful fromor
ery and residential
rod
residential
installations.
arethe
identically
from
insideinthe room
or from Folds
outside
buildingbeautiful
— an architectural
. Puts baton
inside
the room
or from
outside
the
buildingare
— an
architectural
advantage.
Stackback
space
is less.
Headings
suspended
aton to open
advantage.
Stackback
spaceeasily
is less.snap
Headings
under the track.
Draperies
on andare
offsuspended
from carriers.
que in any
under
the
track.
Draperies
easily
snap
on
and
off
from carriers.
® fullness from four differently spaced snap carriers.
Select
d Ripplefold
Select fullness from four differently spaced snap carriers.
Drapery specifications
Parts Drapery
specifi
Specifications
cations
Finished drapery panels to be
Spaced carriers control
Spaced
draperycarriers
fullnesscontrol
drapery
fullness
Finished drapery
Furnish
panels and
to in
beinstall
draw
fabricated
per•instructions
KirschKirsch hand
n masters
Standard
fabricated per
instructions
track
Seriesin94003,
Kirsch94004, 94005,
or carriers
Ripplefold
Guide,
F0337008,
using
Standard
carriers
Ripplefold
Guide,
94008
F0337008,
using
No.
92145
stiff
ened
nylon
tape
with
133
No.
92145
stiff
ened
nylon
tape
with
on 4¼" centers.
• Track to be equipped with
al pleated snaps
draperies
snaps on 4¼" centers.
appropriate components for
Bottom hems to be 4” wide with Kirsch
heading system selected.
Bottom
to be
4” wide
withinKirsch
No.
1615hems
covered
lead
weights
Draperies
to beingrommeted• with
Spaced snap carriers for use with all
No. 1615
lead weights
corner
of covered
each• panel.
eyelet.
• track
Spaced
snap carriers
with all
systems
except for
Nos.use
93001
corner of each panel.
track
systems
except
Nos.
93001
• Specify 2½', 3', 4', 5' or 6' baton.
• No. 92140 for 120% fullness
•• No.
94133
No. 92140
92141 for
for 120%
100% fullness
fullness
For conventional
Right hand
• No.
No. 92142
92141 for
for 80%
100%fullness
fullness
•
pleated draperies
92145
•
No.
92142
for
80%
fullness
135
Masters
92145 No. 94133 R.H.
heading systems
No. 94134 L.H
(For Baton Draw, use F0337018
Fabrication
Guide)
(For Baton Draw,
use
F0337018
Stiff
ener
Fabrication Guide)
94133
Right hand
h eyelet
al pleated
4004.
No. 94145 Front load carriers
Front load carriers
For Ripplefold
Masters
No. 94135 R.H.
• Slide shoes for use with front load
No. 94136 L.H
• track
Slide shoes
forSeries
use with
front load
systems
93001
track
systems
Series
93001
Stiffener
No. 94146 • No. 93140 for 120% fullness
No. 93141
93140 for
for 100%
120% fullness
fullness
•• No.
Refer to Baton Draw Systems Brochure
•• No.
93141
for
100%
fullness
No. 93142 for 80% fullness
F0337018
•• No.
No. 93142
93143 for
for 80%
60% fullness
fullness
Applications
Applications
Can be used on track systems.
Cantrack
be used
oncations
track systems.
For
specifi
refer to page 6.
For track specifications refer to page 6.
Cord draw
Cord draw
No. 94001 Series
No. 94001 Series
No. 93001 Series
No. 93001 Series
No. 93601 Series
No. 93601 Series
Baton draw
Baton draw
No. 94003 Series
No. 94003 Series
No. 94004 Series
No. 94004 Series
No. 94005 Series
No. 94005 Series
No. 9046 Series
No. 9046 Series
No. 94008 Series
No. 94008 Series
h eyelet
4
4
Toll-free 800 • 453 • 7273
5
www.drape.com
RCHITECT
’S
Baton Draw System
BatonA
Draw
System
For use with Ripplefold
Forand
useConventional
with Ripplefold
Pleats
and Conventional
Pleats
GUIDE
A
Baton Draw
Baton
System
Draw
with
System
Sewn-on
with Sewn-on
Stiffener Stiffen
Custom Hand Draw
Custom
System
Hand Draw System
Designed for a varietyDesigned
of commercial
for a variety
and institutional
of commercial
applications.
and institutional applications.
Ideal for motels, hotels,
Ideal
dormitories,
for motels,etc.,
hotels,
where
dormitories,
drapery and
etc.,rod
where drapery and rod
wear present special maintenance
wear present problems
special maintenance
and costs. Puts
problems
batonand
in costs. Puts baton in
view of the user. No hidden
view ofcords.
the user.
JustNo
push
hidden
or pull
cords.
baton
Just
topush
openor pull baton to open
and close draperies. Multi-wheel
and close draperies.
masters will
Multi-wheel
take torque
masters
in any
will take torque in any
®
direction. Can be used
direction.
with conventional
Can be used
pleated
with conventional
and Ripplefold
pleated
and Ripplefold®
heading systems.
heading systems.
Features
Features
Component PartsComponentSpecifi
Parts cations
Specifications
• Stiffener is sewn and grommeted
• Stiffenerto
is sewn and grommeted to
• Furnish and install Kirsch
• hand
Furnish
draw
and install Kir
Multi-wheel batontrack
masters
drapery overlap.
drapery overlap.Multi-wheel baton masters
Series 94003, 94004,track
94005,
Series
or 94003, 94
94008
94008
• Stiffener socket is placed
• over
Stiffener socket is
placed
overand 94133 Nos. 94134 and 94133
Nos.
94134
master arm.
master arm.
• Track
to be
equipped with
• Track to be equipped
Use with conventional pleated
Use with
draperies
conventional
pleated
draperies
appropriate
components
appropriate
for
compon
• Baton is attached by a screw
• Baton is attached by a screw
heading
system
selected.
heading
system
selec
through the eyelet and into
through
the the eyelet and into the
master arm.
master arm.
• Draperies to be grommeted
• Draperies
with to be grom
eyelet.
eyelet.
• 92900 tooling with 94147
• 92900
eyelettooling
die
with 94147 eyelet die
• Specify 2½', 3', 4', 5' or 6'•baton.
Specify 2½', 3', 4', 5' or
94134
Eyelet
Left hand
Eyelet
Master
Arm
Master
Arm
Stiffener
Socket
Baton
Stiffener
Socket
Baton
Stiffener
No. 94145
Stiffener
No. 9
For Ripplefold
For Ripplefold
Masters
No. 94135
Masters
R.H.
No. 9
No. 94136 L.H
No. 9
94134
Left hand
94134 94133
Left Right
hand hand
Stiffener Right hand
No. 94146
Stiffener
Stiffeners
Stiffeners
Refer to Baton Draw Systems
ReferBrochure
to Baton Draw Sys
F0337018
F0337018
Baton
94133
For conventional
For conventional
Right hand
pleated draperies
pleated draperies
Nos. 94136 and 94135 Nos. 94136 and 94135
Masters
No. 94133
Masters
R.H.
No. 9
Use with Ripplefold heading
Usesystems
with Ripplefold heading systemsNo. 94134 L.H
No. 9
Baton
94134 94133
Left Right
hand hand
94133
No. 9
No. 94145
No. 94145
For use with conventional pleated
For use with conventional pleated
drapery trim; use with 94004. drapery trim; use with 94004.
No. 94146
No. 94146
Toll-free 800 • 453 • 7273
Eyelet
Eyelet
www.drape.com
5
CT’A
S RCHITECT
’S Track Systems
Track Systems
Performance
and Installation
Data and
Application
Installation Application
GUIDE DataPerformance
UIDE
ck Systems
Track Systems
Performance
Performance
Data Data
SERIES
CROSS
CROSS
BENDING
H E BAEDNI N
DG
ING
S E R I E S M A X T R A C K S E T LM
EN
AG
X TTHR A C K S E T L E N G T H
SEC TION
SEC TION
RADIUS
S Y SRTAE D
MISU S
HEADING
SYSTEMS
Draw Systems
Cord Draw Systems
93001
93001
One-Way Draw
Two-Way Draw
One-Way
16 ft.Draw
Two-Way
32 ft.Draw
16Conventional
ft.
Pleated
12" ∞*†
32 ft. Ripplefold
Conventional Pleated
Ripplefold∞
93601
93601
One-Way Draw
Two-Way Draw
One-Way
16 ft.Draw
16Conventional
ft.
Pleated
Not Available
Not Available
Two-Way
32 ft.Draw
32 ft. Ripplefold∞
Ripplefold∞
t is opened Track
and set is opened and
by traverse cord.
closed by traverse cord.
½" pulley
uous cord loop
Continuous cord
loop
94001
use of cordpermits use of cord
pulley.
tension pulley.
9095
½" pulley
1" pulley
94001 One-Way Draw
Two-Way Draw
16 ft. One-Way
20 ft.Draw
32 ft. Two-Way
40 ft.Draw
16 ft.*
12"
32 ft.
20 ft.
12" *†
Ripplefold∞
40 ft.
Ripplefold∞
One-Way Draw
Two-Way Draw
One-Way
24 ft.Draw
Two-Way
32 ft.Draw
8" *
24 ft.
Conventional8"Pleated
*
32 ft.
One-Way
12½ ft.
Draw
12½ ft.
Not Available Conventional
Not Available
Pleated
Two-Way
25 ft.Draw
25 ft.
9095
3000 One-Way Draw
(Superfine)Two-Way Draw
3000
(Superfine)
1" pulley
12" *†
†
d Draw Cordless
Hand Draw
Systems
Cordless Systems
94003
t is opened Track
and set is opened
and
by hand — no
closed by hand — no
volved.
cord involved.
94003
One-Way Draw
Two-Way Draw
One-Way
20 ft.Draw
Two-Way
40 ft.Draw
20 ft.
12" *†
Cubicle Curtain
40 ft.
Ripplefold
Cubicle Curtain
Ripplefold
94004
ass batons, Fiberglass batons,
d to lead carriers,
attached to lead carriers,
ommended for
are recommended for
ng draperies.traversing draperies.
94005
um track lengths
Maximum
and track lengths and
um fabric weight
maximum fabric weight
apply to curved
do not apply to curved
9046
end complete
track. Send complete
ations and fabric
specifications and fabric
to customerweight to customer
for feasibility.service for feasibility.
94008
94004
One-Way Draw
Two-Way Draw
One-Way
16 ft.Draw
16 ft.
Not Available
Cubicle
NotCurtain
Available
Two-Way
32 ft.Draw
32 ft.
Ripplefold
Cubicle Curtain
Ripplefold
94005
One-Way Draw
Two-Way Draw
One-Way
16 ft.Draw
Two-Way
32 ft.Draw
16 ft.
Cubicle Curtain
12" *†
32 ft.
Ripplefold
Cubicle Curtain
Ripplefold
One-Way Draw
9046
Two-Way Draw
One-Way
16 ft.Draw
16 ft.
†
8" or 12" *
Cubicle
8"Curtain
or 12" *†
Two-Way
20 ft.Draw
20 ft.
Ripplefold
Cubicle Curtain
Ripplefold
One-Way Draw
Two-Way Draw
Pinch pleats
One-Way
16 ft.Draw
16 ft.
Not Available
Cubicle
NotCurtain
Available
Two-Way
32 ft.Draw
32 ft.
Ripplefold
Pinch pleats
Cubicle Curtain
Ripplefold
notes
Footnotes
6
94008
12" *†
12" *†
* Can be angular bent using radius
* Can
listed
be angular
or circular
bent
curved.
using radius listed or circular curved. ∞ Maximum length for
∞ Maximum length for
Ripplefold®
one-way draw Ripplefold®
† NOTE: Nos. 93001, 94001, 94003,
† NOTE:
94005
Nos.
and93001,
9046 94001,
can be curved
94003,to94005
a larger
andsemi-circle
9046 can be curved toone-way
a larger draw
semi-circle
track systems is 16 feet.
track systems is 16 feet.
radius. Contact customer serviceradius.
for more
Contact
information.
customer service for more information.
ATrack
RCHITECT
’S
Systems
Performance Data and Installation
PerformanceApplication
Data and Installation G
Application
UIDE
Track Systems
InstallationInstallation
ApplicationApplication
A P P L I C AT I O N & B R A C K E T C
A LP EP A
L IRCAAT
N CI OE N & B R A C K E T I C
E E
N LTEEAR RMAENDCI AT
C E I L I N G I N S TA L L AT I O N
C I INOGN
WSAULPL PIONRS TTASLPA
L AT
C EW
I LAI N
L LG I INNSSTA
TALLLLAT
ATI IOONN
I N T E R M E D I AT E
M A X FA B R I C W E I G H T
S U P P O R T S PA C I N G
LBS
PMEARX FA B R I C
FOOT
Track perforated 16" on center for direct Track perforated 16"½"onpulley
center¾"
forpulley
direct
½" pu
mounting with screw. Wall Mount:
mounting with screw. Wall Mount:
One-Way Draw 32 lbs. 32 lbs. One-Way
2 Draw 32 lb
2"- 3"
Two brackets at each end 24" apart,
Two brackets at each end 24" apart,
2 Draw 32 lb
Two-Way
Draw
32
lbs.
40
lbs.
Two-Way
48" apart over remainder of track.
No brackets
required
No brackets
2"- 3"
required
No. 1796
No. 94130
No. 1796
3½" - 4½"
No. 94130
Two brackets at each end
24" apart, 48" apart3½over
" - 4½"
remainder of track
Two Draw
brackets at each end
One-Way
48 lbs.
24" apart, 48" apart over
Two-Wayremainder
Draw of track 56 lbs.
1½"
Single
2¼" - 3¼"
1½"
Double
1¼" - 2½"
Single
2¼" - 3¼"
Double
remainder of track
1¼" - 2½"
¾" pulley
½" pu
Two brackets½"atpulley
each end
One-Way
Draw 48"
32apart
lbs. over
64 lbs. One-Way
3.1 Draw 32 lb
24" apart,
track 80 lbs. Two-Way
2 Draw 32 lb
Two-Wayremainder
Draw 32oflbs.
3 Draw
One-Way
Two-Way
3.5 Draw
1.9 Draw
One-Way
Draw
lbs. One-Way
1 support 16" from each2"-end,
3"
1 support
16" from each 30
end,
32" apart over remainder4"of-track
5"
32"
apart
over
remainder
of
track
Two-Way Draw
45 lbs. Two-Way
1.4 Draw
No brackets
required
No brackets
2"- 3"
required
4" - 5"
Drop-in
2"- 3"
Drop-in
Push-in
2"2"-3"3"
Push-in
2"- 3"
remainder of track
Two Draw
One-Way
15 lbs.
Two-Wayremainder
One-Way
1 Draw
1.8 Draw
Two-Way
2"
3½"2"- 4½" ¥
Two Draw
One-Way
40 lbs.
24” apart, 48” apart
3½"
over
- 4½" ¥
24” apart, 48” apart over
Two-Wayremainder
remainder of track
One-Way
2 Draw
2 Draw
Two-Way
No brackets
required
Not Available
No brackets
required
Draw 16" on center
32 lbs.
2 Draw
Track perforated 16" on center for One-Way
Track perforated
for One-Way
Not Available
direct mounting with screws
direct
mounting
with
screws
2 Draw
Two-Way Draw
64 lbs. Two-Way
No brackets
required
Not Available
No brackets
required
Draw 16" on center
32 lbs.
2 Draw
Track perforated
for One-Way
Not Available
direct
mounting
with
screws
2 Draw
Two-Way Draw
64 lbs. Two-Way
No brackets
required
Not Available
No brackets
required
Draw 16" on center
32 lbs.
2 Draw
Track perforated
for One-Way
Not Available
direct mounting
with screws
2 Draw
Two-Way
Draw
64 lbs. Two-Way
3"
3½"3"- 4½"
¥ Wall or mullion installation
¥
Track perforated 16" on center for direct Track perforated 16" on center for direct
Draw
32 lbs. One-Way
2 Draw
mounting with screw. Wall Mount: ¥ One-Way
mounting
with screw. Wall Mount:
3½" - 4½"
Two brackets at each end 24" apart, Two-Way
Two brackets
at
each
end
24"
apart,
2 Draw
Draw
64 lbs. Two-Way
¥ Wall or mullion installation
7
ECT’A
S RCHITECT
’S Architrac
Architrac
Series
94001 Track
Series 94001 Track
GUIDE
UIDE
chitrac
Architrac
Series 94001
Series Track
94001 Track
ate channels
• Separate
for operating
channels
equipment
for operating
and equipment
carriers which
and carriers which
draperies. hold draperies.
®
®
ccommodate
• WillRipplefold
accommodate
andRipplefold
standard pleated
and standard
draperies.
pleated draperies.
ve and add
• Remove
slides with
and snap
add slides
open with
end gate.
snap open end gate.
ption Description
Brackets
Brackets
l or ceiling• mounting.
For wall or ceiling mounting.
Standard Pulley set
Standard Pulley set
Nos. 94119 and 94120
Nos. 94119 and 94120
hannel, cord
• Dual-channel,
operated.
cord operated.
ed .050" No.
• 6063T5
Extruded .050" No. 6063T5
um alloy, etched
aluminum
and alloy, etched and
ed.
anodized.
1�⁄��"
Drapery
Heading
Component Component
Parts
Parts
1�⁄��"
Drapery
Heading
baked enamel
• White
finish.
baked enamel finish.
No. 94130
No. 94130
Bracket
for
ceiling
mounting
Bracket for ceiling mounting
d pulleys •toTwo
choose
endfrom
pulleys
for to choose from for
ghtweight or
either
heavyweight
lightweight or heavyweight
2�⁄��"
2�⁄��"
es.
draperies.
heel roller-bearing
• Multiwheel
masters
roller-bearing masters
t any binding
prevent
and give
anyeasy
binding and give easy
ng.
traversing.
1½"
1½"
3�⁄�"
Min. Pocket
1�/��"
1¼"
¾" 3�⁄�"
Min. Pocket
½" diameter Teflon®½"
bearings
diameter
forTeflon® bearings for
1¼"
standard weight draperies
standardwhere
weight draperies where
minimum stackback
minimum
and uniform
stackback and uniform
folding
to
the
end
of
folding
the
rod
to
is
the
desired.
end of the rod is desired.
¾"
No. 94130
No. 94130
Heavy Duty Pulley
Heavy
set Duty Pulley set
Bracket��for recess mounting
Bracket for recess mounting
Nos. 94101 and 94102
Nos. 94101 and 94102
1�/ "
size — end viewActual size — end view
cationsApplications
No. 94125
No. 94125
n wall or ceiling
Mounts(flon
ushwall or ceiling (flush
Double bracket for Double
wall mounting
bracket for wall mounting
For spansorup
recess).
to 40’ For
in aspans up to 40’ in a
draw. Track
two-way
can be curved.
draw. Track can be curved.
1" diameter heavy duty
1" diameter
ball bearing
heavy duty ball bearing
series willThis
accommodate
track series will accommodate
pulley
sets
for
heavier
pulley
installations,
sets
for
heavier installations,
d® and conventional
Ripplefold®pleated
and conventional pleated
larger spans.
larger spans.
eading systems.
drapery heading systems.
Requires use of rod notching
Requires
tool
useNo.
of 9997
rod notching tool No. 9997
No. 94122
No. 94122
Bracket for wall mounting
Bracket for wall mounting
3½" return
3½" return
8
Toll-free 800 • 453 • 7273
www.drape.com
Architrac
Series 94001 Track
ARCHITECT
Architrac’S A
Series 94001
GTrack
UIDE
Conventional ConventionalAssembled Sets Assembled Sets
Suggested Specifi
Suggested
cations Speci
Heading SystemsHeading Systems
• Furnish and install, as indicated
• Furnish and install, as
on plans, Kirsch Track No.on
94001,
plans, Kirsch Track
Master Carriers for conventional
Master Carriers for conventional
extruded of .050" 6063T5extruded
aluminum
of .050" 6063
pleated draperies
pleated draperies
alloy in accordance with alloy
Aluminum
in accordance w
Nos. 94104 and 94103 Nos. 94104 and 94103
Association
Specifi
cation.
Association
Specificat
Set includes assembled rod,
Set includes
94122 wall
assembled rod, 94122 wall
No.AA-C22A21.
Finish
(25)
No.AA-C22A21.
White,
Finish
or 94130 ceiling bracketsorand
94130
9923ceiling brackets and 9923
Baked
Enamel
Baked
Enamel
cord tension pulley; longer
cord
brackets
tension pulley; longer brackets
can be ordered separately.
can
Rod
be may
ordered
be separately.
Rod
may be Brackets
• Specify
Mounting
• Specify Mounting Bra
angular bent or circular curved.
angular bent or circular
curved.
and Quantity
and Quantity
– Ceiling
– Ceiling
Brackets:
– Wall – Single Track
Wall or ceiling mount. – Wall – Single Track
– Wall – Double Track – Wall – Double Trac
Draperies:
Draperies:
Multiwheel roller-bearingMultiwheel
masters. roller-bearing
masters.
®
• Specify
Drapery
• and
Specify
Fullness
Drapery Syste
Pinch
Pleat,
Ripplefold® (butt
Pinch
Ripplefold
orPleat,
overlap
(butt or
overlapSystem
Regardless of torque, master
Regardless
rollers of torque,
master
rollers
won’t bind.
won’t bind.
masters and fullness). masters and fullness). – Standard Pleated
– Standard Pleated
Brackets:
Wall or ceiling mount.
®
– Ripplefold
– 80%,
Ripplefold
60% ® 120%, 1
Fabrication and Planning
Fabrication
Guides: and Planning
Guides: 120%, 100%,
Ripplefold®-Tape: refer to Ripplefold
F0337008 ®-Tape: refer
to F0337008
• Specify
Master
• Specify Master
Optional Operational
Optional Operational
– Butt Master
Components ComponentsSet with 1" end pulleySet with 1" end pulley
–
Butt Master
Overlap Master
– Overlap Master
–
No. 94270H
No. 94270H
Butt Master Carriers Butt Master Carriers
• End Pulley Options • End Pulley Options
Finish (25) White, Baked Enamel
Nos. 94118 and 94117 Nos. 94118 and 94117
– ½" Teflon® Bearing
– ½" Teflon® Bearing
Nos. 94119 and 94120 Nos. 94119 and 94
Set with ½" end pulley
Set with ½" end pulley
– 1" H.D. Ball Bearing
– 1" H.D. Ball Bearing
No. 94270
No. 94270
Nos. 94101 and 94102 Nos. 94101 and 94
94118
94118 94117
94117
• No. 9934 polyester cord,
• No.
used9934
withpolyester co
Left hand
Left hand
Right hand
Right hand
bearing
½" Teflon® end and 1" ball½"
Teflon® end and 1"
end pulley set.
end pulley set.
Drapery panels
Drapery panels
butt together at center. butt together at center.
• Tension Pulley to be No.
• 9923
Tension Pulley to be N
No flat areas or overlap shadow.
No flat areas or overlap shadow.
Overlap Master Carriers
Overlap Master Carriers
Nos. 94116 and 94115 Nos. 94116 and 94115
94116
Left hand
94116 94115
Left hand
Right hand
Drapery panels
overlap at center.
Drapery panels
overlap at center.
Toll-free 800 • 453 • 7273
94115
Right hand
www.drape.com
9
ECTA
’SRCHITECT
’S IIArchitrac II
Architrac
93001 Track
Series 93001 Track
GUIDE Series
GUIDE
chitrac
Architrac
II Series
II 93001
Series Track
93001 Track
loading•carrier
Front loading
system for
carrier
easy system
hanging
forofeasy
draperies.
hanging of draperies.
e opening
• Large
carrieropening
channelcarrier
acceptschannel
standard
accepts
hex socket
standard
drivers
hex socket drivers
rect ceiling
forinstallation
direct ceiling installation
able with• either
Available
¾" or
with
½"either
end pulley
¾" orsets.
½" end pulley sets.
ce of butt• or
Choice
overlap
of butt
masters.
or overlap masters.
ng edges•coated
Slidingwith
edges
lubrication
coated with
for lubrication
smooth traversing
for smooth
action.
traversing action.
iption Description
ApplicationsApplications
ComponentComponent
Parts
Parts
ll or ceiling
• mounting.
For wall or ceiling mounting.
Mounts on wall orMounts
ceiling. Track
on wall
can
or ceiling. Track can
Pulleys
Pulleys
be
curved
to
any
angle
be
curved
using
to
a
12"
any
angle using
a 12"
hannel, cord
• Dual-channel,
operated. cord operated.
radius or circular curve.
radiusCan
or circular
be usedcurve. Can
be used draw One-way draw
One-way
ed .050" No.
• Extruded
6063T5 .050" No. 6063T5
in
two-way
draw
for
in
two-way
spans
up
draw
to
32’
.
for
spans
up
to 32’.
num alloy, etched
aluminum
and alloy, etched and
®
®
Will
accommodate
Will
Ripplefold
accommodate
and
Ripplefold
and
ed.
anodized.
No. 93103
No. 93103
pinch pleated draperies.
pinch pleated draperies.
is white. • Finish is white.
nd pulleys• toTwo
choose
end pulleys
from forto choose from for
Ceiling Installations
Ceiling Installations Two-way draw Two-way draw
lightweight either
or heavyweight
lightweight or heavyweight
½" dia.; max load 32
½"lbs.
dia.; max load 32 lbs.
Install directly through
Installpre-drilled
directly through pre-drilled
ies.
draperies.
holes (16" intervals)
holes
in track
(16"and
intervals)
end in track and end
No.yield
93101
No. 93101
pulleys.
Use
fasteners
pulleys.
which
Use
yield
fasteners
which
1½"
1½"
Left
hand
Left hand
direct withdrawal strength
direct withdrawal
of 25 lbs. strength of 25 lbs.
�/�" �/�"
�/�"
Drapery
Heading
ual size — end view
Actual size — end view
�" /�"
Wall�/Installations
Wall Installations
�
No. 93102
Right hand
No. 93102
Right hand
Two brackets at each
Twoend
brackets
of track
at each end of track
Heavy Duty
Heavy Duty
24" apart, 48" apart24"
over
apart,
remainder
48" apart
of over remainder
of
¾"
dia.
with
Tefl
on
¾"
bearings;
dia. with Teflon bearings;
track.
track.
�/�"
Max load 64 lbs. Max load 64 lbs.
Drapery
Heading
No. 93091
Left hand
No. 93091
Left hand
No. 93092
Right hand
No. 93092
Right hand
Carriers
Carriers
Nos. 93140-93143Nos. 93140-93143
Space slide shoes for
Space
Ripplefold
slide shoes
systems
for Ripplefold systems
10
No. 93123
Slide shoe
No. 93123
Slide shoe
No. 93121
Snap carrier
No. 93121
Snap carrier
Architrac II
Series 93001 Track
Component Parts Component
Assembled
Parts Sets
Brackets
Brackets
No. 93138
End bracket
No. 93138
End bracket
No. 93139
Wall bracket
2"- 3" clear
No. 93139
Wall bracket
2"- 3" clear
Butt Master Carriers
Nos. 93105 and 93104
93105
Left hand
Assembled
Suggested
Sets
Specifications
Suggested Sp
• Furnish and install, as indicated
• Furnish and insta
on plans, Kirsch Track No.
on plans, Kirsch T
93001, extruded of .050” 6063T5
93001, extruded
aluminum alloy in accordancealuminum
with
alloy i
Aluminum Association SpecifiAluminum
cation
Asso
No. AA-C22A21. Finish to be (25)
No. AA-C22A21.
white, baked enamel
white, baked ena
• Specify Mount
• Specify Mount
A. Surface direct or No. 93138 A. Surface direc
ceiling brackets
ceiling bracke
B. Wall — No. 93139 brackets B. Wall — No. 9
Overlap Master Carriers Overlap Master Carriers
Nos. 93107 and 93106
Nos. 93107 and 93106
93107
Left hand
ARCHITECT
’S II
Architrac
Series 93001
Track
GUIDE
• Specify Drapery System and• Fullness
Specify Drapery
A. Conventional pleated
A. Conventional
®
Set includes assembled rod, standard
Set includes assembled
rod,
standard
B. Ripplefold 120%, 100%, 80%,
B. 60%
Ripplefold® 12
wall or ceiling brackets and 9923
wallcord
or ceiling brackets and 9923 cord
Specifybrackets
Master Slides
• Specify Master S
tension pulley. Longer bracketstension
must pulley.• Longer
must
A. Butt Masters:
A. Butt Masters:
be ordered separately. Rod may
bebe
ordered separately.
Rod may be
Nos.
93104
and
93105
Nos. 93104 an
B. Overlap Masters:
B. Overlap Mast
93107
93106
93106 Guides:
Guides:
Nos. 93106
and 93107
Nos. 93106 an
Right
Left hand
hand
Right
hand
®
®
Ripplefold : Refer to F4730002 Ripplefold : Refer to F4730002
• End Pulley Options
• End Pulley Optio
A. Regular: No. 93102
A. Regular: No. 9
Track
with
heavy
duty
pulleys
Track
with
heavy
duty
pulleys
Nos. 93105 and 93104
B. Heavy Duty: Nos. 93091 andB. Heavy Duty: N
No. 93150H
No. 93150H
93092
93092
Finish (25) White,
Baked
Enamel
• Cord to be No. 9934 polyester
• Cord to be No. 9
• Cord Guide to be Nos. 9945 •orCord
9923Guide to be
Track with standard pulleys
Track with standard
tensionpulleys
pulley
tension pulley
No. 93150
No. 93150
93105
93104
Right
Left hand
hand
93104
Right hand
Maximum capacity specifiMaximum
cations forcapacity
H.D. Architrac
specifi(series
cations93001)
for H.D. Architrac (series 93001)
All components
have
NOTE:
under
All components
been
tested
Type ofhave
fabric
based
on under
48" goods –Type
10 oz.
of fabric based o
Maximum widths are determined inMaximum
part by widthsNOTE:
are determined
in part
by been tested
conditions
simulating
conditions
Snaps simulating
ten years’
usage.sheers
Snapsor lightweight
per linear
yard. Lined
per linear yard. Lined s
available track lengths. Splicing is not
available track lengths.
Splicing
is not ten years’ usage.
will
detachloads
with aapply
4 lb. “peel”
anddetach with fabrics.
a 4 lb. “peel”
and to equal 32fabrics.
Size ofaction
draperies
lbs. based
Size of draperi
recommended. Maximum loads apply
recommended.
when
Maximum
when actionwill
release with
a sheer
pull of 22 lbs. release with a sheer
pull offullness
22 lbs. 16’ wide x 16’ longon
on 100%
– 32’
100%
wide
fullness 16’ w
using Kirsch Ripplefold® drapery systems.
using Kirsch Ripplefold®
drapery
systems.
x 8’ long.
x 8’ long.
No. 93001, when installed with medium
No. 93001, when installed with medium
Maximum loads
Maximum loads
Type of fabric based on 48" goods –Type
20 oz.
of fabric based o
weight fabric on standard size windows
weight
(i.e.,fabric on standard size windows (i.e.,
Type
ofoperate
fabric based
48" goods –Type
5 oz.of fabric based
on 48"yard.
goods
– 5 medium
oz.
per linear
Lined
weight
perfabrics
linear yard. Lined m
16’ wide by 8’ high) will operate with16’
a wide
2-3 by 8’ high)
will
with aon2-3
per linear
Unlined
or lightweight
per linear yard. Unlined
or lightweight
or heavysheer
cotton,
velours and linens.or
Size
heavy
of cotton, velou
lb. pull requirement. When installedlb.
with
pulla requirement.
Whenyard.
installed
withsheer
a
fabrics.
Size
of
draperies
to
equal
32
fabrics.
lbs.
based
Size
of
draperies
to
equal
draperies to equal3232lbs.
lbs.based
based on draperies
100%
to equal 32
maximum load, it will operate with maximum
a 5-6 lb. load, it will operate with a 5-6 lb.
– 32’
100%
wide
fullnessfullness
16’ wide16’x wide
32’ long
32’ wide
x 8’–long
fullness 16’ wide x 8’ lo
pull requirement.
pull requirement.on 100% fullness 16’ wide x 32’ longon
x 16’ long
x 16’ long
11
HITECT
ARCHITECT
’S Baton
’S or Baton
Hand Draw
or Hand Draw
Series Nos.
and 94003
94004 and 94004
GUIDE GSeries
UIDENos. 94003
atonBaton
or Hand
or Hand
DrawDraw
scription
Description
No. 94003
No. 94003
No. 94004
No. 94004
truded .050"
• Extruded
high strength,
.050" high
6063T5
strength, 6063T5
Application
Application
Application
Application
uminum alloy
aluminum
single channel
alloy single
trackschannel
tracks
• Hand draw. • Hand draw.
• Hand draw. • Hand draw.
ched and anodized
etched and
in natural
anodized in natural
ish in accordance
finish in
with
accordance
Aluminum
with Aluminum
• Wall or Ceiling
• Wall
mount.
or Ceiling mount.
• Ceiling mount.
• Ceiling mount.
sociation Specifi
Association
cation Specification • White baked• enamel
White baked
finish. enamel finish. • White baked• enamel
White baked
finish. enamel finish.
o. AA-C22A21.
No. AA-C22A21.
• Can be bent• toCan
anybe
angle
bentusing
to any
12"angle using
• Rear
12"flange perforated
• Rear flange
on perforated
16"
on 16"
r cordless •traverse
For cordless
operation.
traverse operation.
radius; larger semi-circular
radius; largerradius
semi-circular radius
centers for direct
centers
ceiling
formount;
direct ceiling mount;
sliding edges
• All lubricated
sliding edges
withlubricated with
curved at factory.
curved at factory.
no need to screw
no need
through
to screw
channel.
through channel.
lon® except Kirlon®
94008. except 94008.
• Track cannot• be
Track
curved.
cannot be curved.
Wall mount
Wall mount
Ceiling mount
Ceiling mount
Ceiling mount
Ceiling mount
Suggested Specifi
Suggested
cations
Specifications Suggested Specifi
Suggested
cations
Specifications
• Track
• Track
• Track
• Track
– Furnish and install,
– Furnish
as indicated
and install,
on plans,
as indicated on
– Furnish
plans, and install,
– Furnish
as indicated
and install,
on as indicated on
Kirsch track NO. 94003,
Kirsch extruded
track NO. 94003,
of .050"extruded ofplans,
.050" track No. 94004,
plans, extruded
track No. 94004,
of .050"extruded of .050"
6063T5 Aluminum
6063T5
alloy etched
Aluminum
and alloy etched and6063T5 Aluminum.
6063T5
TrackAluminum.
to be fastened
Track to be fastened
anodized.
anodized.
securely at 16" intervals
securelythrough
at 16" intervals
prethrough predrilled holes.
drilled holes.
• Specify Finish:• Specify Finish:
• Specify Finish:• Specify Finish:
– (25) White
– (25) White
• Ball Bearing / •Wheeled
Ball Bearing
Slides:/ Wheeled Slides:
Use No. 9603 End Use
CapNo.
and9603 End Cap and
• Ball Bearing / •Wheeled
Ball Bearing
Slides:/ Wheeled Slides:
No. 94113-94114 Master
No. 94113-94114
Carrier Master Carrier
Use No. 94113 or 94114
Use No.
Master
94113Carrier
or 94114 Master Carrier
– No. 9670 Ball Bearing
– No. 9670
styleBall Bearing style
– No. 9670
– No. 9687
– No. 9687
– No. 9673
– No. 9673
– No. 9678R Wheeled
– No.style
9678R Wheeled style
– No. 9678R Wheeled
– No.style
9678R Wheeled style
– (25) White
– (25) White
• Button Slides:• Button Slides:
• Button Slides:• Button Slides:
Use with No. 9684Use
Endwith
StopNo.
and9684
No. End
9644Stop and No. 9644
Use No. 9644 Master
UseCarrier
No. 9644
andMaster Carrier and
Master Carrier with
Master
Button
Carrier
Style Slides
with Button Style SlidesNo. 9684 End StopNo. 9684 End Stop
– No. 9406 Button
– Style
No. 9406 Button Style
– No. 9406 Button
– Style
– No. 9685 Button
– Style
– No. 9685 Button
– Style
– No. 9686 Button
– Style
– No. 9686 Button
– Style
• Specify Mounting
• Specify
Bracket:
Mounting Bracket:
• Specify End Cap:
• Specify End Cap:
– Wall Mount: No.
– 94132V
Wall Mount: No. 94132V
– No. 94142 – No. 94142
(2" - 3" Clearance)(2" - 3" Clearance)
– Ceiling Mount:–No.
Ceiling
94140.
Mount:
One Bracket
No. 94140. One Bracket
to be mounted attoeach
be mounted
end of track.
at each end of track.
(One 24" from each
(One
drapery
24" from
stacking
each drapery stacking
end and one at 48"
endintervals
and oneover
at 48" intervals over
remainder of track).
remainder of track).
14
Toll-free 800 • 453 • 7273
www.drape.com
ARCHITECT
ARCHITEC
’S
BatonBaton
or Hand
or Hand
Draw Draw
Series Nos.
Series
94005,
Nos. 94005,
9046 and
9046
94008
and 94008
GUIDEGUI
No. 94005
No. 94005
No. 9046
No. 9046
No. 94008
No. 94008
Application
Application
Application
Application
Application
Application
• Hand draw.
• Hand draw.
• Hand draw
• Hand draw
• Hand draw.
• Hand draw.
• Ceiling• mount.
Ceiling mount.
• Ceiling• mount.
Ceiling mount.
• Wall or•ceiling
Wall or
mount.
ceiling mount.
• White baked
• White
enamel
bakedfienamel
nish. finish.
• White baked
• White
enamel
bakedfienamel
nish. finish.
• White baked
• White
enamel
bakedfienamel
nish. finish.
• Track perforated
• Track perforated
on 16" centers.
on 16" centers. • Cannot• be
• Can be• bent
Canto
beany
bent
angle
to any
using
angle
12"using 12"
Cannot
bent. be bent.
radius; semi-circular
curves ofcurves
48" of 48"• Can be• bent
Canto
beany
bent
angle
to any
using
angle
8" using 8"
radius (min.)
radius
can(min.)
be curved
can beatcurved
factory.at factory.
or 12" radius;
or 12"
semi-circular
curves ofcurves of
48" radius48"
(min.)
radius
can(min.)
be curved
can beatcurved at
factory. factory.
Ceiling mount
Ceiling mount
Suggested
Suggested
Specifications
Specifications
Ceiling mount
Ceiling mount
Suggested
Suggested
Specifications
Specifications
Wall mountWall mount Ceiling mount
Ceiling mount
Suggested
Suggested
Specifications
Specifications
• Track • Track
• Track: • Track:
• Track: • Track:
– Furnish and
– Furnish
install,and
as indicated
install, ason
indicated on
– Furnish and
– Furnish
install,and
as indicated
install, ason
indicated on
– Furnish and
– Furnish
install,and
as indicated
install, ason
indicated
plans, on plans,
plans, trackplans,
No. 94005,
track No.
extruded
94005,ofextruded
.050" of .050" plans, Kirsch
plans,
trackKirsch
No. 94008,
track No.
rolled
94008,
of rolled of Kirsch trackKirsch
No. 9046,
trackextruded
No. 9046,ofextruded
.070" of .070"
6063T5 Aluminum.
6063T5 Aluminum.
Track to beTrack
fastened
to be fastened 22 gauge (.030")
22 gauge
Galvanized
(.030") Galvanized
Steel, WhiteSteel, White 6063T5 Aluminum
6063T5 Aluminum
alloy etched
alloy
andetched and
securely atsecurely
16" intervals
at 16"through
intervals through
Baked Enamel
Baked
Finish.
Enamel Finish.
anodized. anodized.
pre-drilled pre-drilled
holes.
holes.
• Ball Bearing
• Ball
/ Wheeled
Bearing /Slides:
Wheeled Slides:
• Finish: • Finish:
• Ball Bearing
• Ball
/ Wheeled
Bearing /Slides:
Wheeled Slides:
Use No. 94113
UseorNo.
94114
94113
Master
or 94114
Carrier
Master Carrier
– No. 9670– Ball
No.Bearing
9670 Ball
style
Bearing style
– No. 9687– Ball
No.Bearing
9687 Ball
Style
Bearing Style
– No. 9673– Ball
No.Bearing
9673 Ball
style
Bearing style
– No. 9678R
– Wheeled
No. 9678Rstyle
Wheeled style
• Button Slides:
• Button Slides:
Use No. 9644
Use
Master
No. 9644
Carrier
Master
andCarrier and
No. 9684 End
No.Stop
9684 End Stop
– No. 9406– Button
No. 9406
Style
Button Style
No. 9685
Style
Button Style
No. 9686
Style.
Button Style.
• Specify •End
Specify
Cap: End Cap:
– No. 94141
– No. 94141
Toll-free 800 • 453 • 7273
Use No. 94113
UseorNo.
94114
94113
Master
or 94114
Carrier
Master
andCarrier and – (25) White
– (25) White
No. 9603 End
No.Cap
9603 End Cap
• Specify •Slide
Specify
Carrier:
Slide Carrier:
– No. 9670– Ball
No.Bearing
9670 Ball
style
Bearing style
No. 9406
Style
Button Style
– No. 9687– Ball
No.Bearing
9687 Ball
Style
Bearing Style
No. 9685
Style
Button Style
– No. 9673– Ball
No.Bearing
9673 Ball
style
Bearing style
No. 9686
Style.
Button Style.
– No. 9678R
– Wheeled
No. 9678Rstyle
Wheeled style
• Specify •Master
Specify
Carrier:
Master Carrier:
• Button Slides:
• Button Slides:
– No. 9644– No. 9644
Use No. 9644
Use
Master
No. 9644
Carrier
Master
andCarrier and
– No. 94158
– &
No.
94159
94158 & 94159
No. 9684 End
No.Stop
9684 End Stop
• Specify •End
Specify
Cap: End Cap:
No. 9406
Style
Button Style
– No. 9684– No. 9684
No. 9685
Style
Button Style
– No. 9682– No. 9682
No. 9686
Style
Button Style
• Specify •Mounting
Specify Mounting
Brackets: Brackets:
– Wall Mount:
– Wall
No.Mount:
94132VNo. 94132V
(2" - 3" Clearance)
(2" - 3" Clearance)
– Ceiling Mount:
– Ceiling
No.Mount:
94140. No.
One94140.
Bracket
One Bracket
to be mounted
to beatmounted
each endatofeach
track.
end of track.
(One 24" from
(Oneeach
24" from
drapery
each
stacking
drapery stacking
end and one
endatand
48" one
intervals
at 48"over
intervals over
remainder remainder
of track). of track).
– NOTE: Fastening
– NOTE:devices
Fastening
should
devices
haveshould
a
have a
minimum 25lb.
minimum
direct 25lb.
withdrawal
direct withdrawal
strength. strength.
Screws usedScrews
through
used
channel
through
openings
channel openings
should be ashould
Phillipsbe
ora#6Phillips
posidrive
or #6head.
posidrive head.
www.drape.com
15
15
TECT
A’RCHITECT
S
’S or Hand
Baton
BatonDraw
or Hand Draw
Components
Components
GUIDE G
UIDE
atonBaton
or Hand
or Hand
Draw Draw
Components
Components
Splices Track Splices
110
No. 94110
th Track No.
Use
94003
with Track No. 94003
No. 9686
No. 9686
Slide Carrier withSlide
hook,
Carrier with hook,
Drapery panels Drapery panels
without bead chain.
without bead chain.
butt together atbutt
center.
together at center.
Standard
Standard drop 3½"
(otherdrop 3½" (other
No flat areas or overlap
No flat areas
shadow.
or overlap shadow.
drops
drops available at
extraavailable
cost). at extra cost).
ap Master
Overlap
Carriers
Master Carriers Nos. 94136 and
Nos.
94135
94136 and 94135
ry panels Drapery panels
p at centeroverlap at center
No. 9673
No. 9673
Ball Bearing Carrier
with attached hook
with attached hook
94174 and
Nos.
94173
94174 and 94173
he top master
Over carrier.
the top master carrier.
No. 9678R
No. 9678R
Wheeled CarrierWheeled Carrier
94134
Left hand
94134
Left hand
94133
Right hand
94174 — Left hand
94174 — Left hand
Nos. 94134 and
Nos.
94133
94134 and 94133
94173 — Right hand
94173 — Right hand
94114 and
Nos.
94113
94114 and 94113
94134
Left hand
94134
Left hand
94133
Right hand
Slide Carriers Slide Carriers
94113
Right hand
94133
Right
hand
No. 9684
End Stops
No. 9684
End Stop with pin-hole
End Stopreturn
with pin-hole return
No. 9683
No. 9683
End Caps
End Caps
No. 9682
No. 9682
94133
Right hand
No. 94141
No. 94141
Use with Track No.
Use with Track No.
94003, 94005 94003, 94005
94113
No. 9670
No. 9670
Right hand
Slide Carrier
Slide Carrier
Must use No. 9683
Must
end
use
stops
No. 9683 end stopsNo. 94142
No. 94142
644
No. 9644
and No. 9644 masters
and No. 9644 masters
Use with Track No.
Use with Track No.
e used with
May
batons.
be used with batons.
94003, 94005 94003, 94005
No. 9406
No. 9406
Button Carrier Button Carrier
Batons with Harness
Batons Snaps
with Harness Snaps
Lubri-side molded
Lubri-side
Celcon;molded Celcon;
For use with cordless
For use
hand
withdraw.
cordless hand draw.
glides smoothlyglides
in track
smoothly in track
White finish. White finish.
nd
94114
Left hand
End Stops
94159 and
Nos.
94158
94159 and 94158 No. 9685
No. 9685
®
tons, Ripplefold
For batons,
and Ripplefold® and Button Carrier (No.
Button
9406)
Carrier (No. 9406)
ntional pleat
conventional
draperies pleat draperieswith attached hook
with attached hook
s must hang
(panels
below
must
track).
hang below track).
nd
94159
Left hand
16
94158
Right hand
No. 9687
No. 9687
with hook, without
withchain.
hook, without chain.
94158 for Has eyelets for
Has eyelets
Right
hand
No.
9688
chain. No. 9688 chain.
3/8" Fiberglass
No. 91232
No. 91233
No. 91234
No. 91235
No. 91236
1/4"
3/8"Steel
Fiberglass Length
1/4" Steel
91332R
No. 91232
91333R
No. 91233
91334R
No. 91234
No. 91235
No. 91236
2½'
91332R
3'91333R
4'91334R
5'
6'
Length
2½'
3'
4'
5'
6'
Baton Draw Multi-Wheel
BatonMasters
Draw Multi-Wheel
for 94133 and
Masters for 94133 and
94134 Pinch Pleat for
94134
extraPinch
overlap;
Pleat
94135
for extra
and overlap; 94135 and
94136 for Ripplefold®.
94136
Requires
for Ripplefold®.
use of 94145
Requires
or
use of 94145 or
94146 stiffeners (see94146
page stiff
5). eners (see page 5).

Drapery Heading Systems

Transcription

Similar documents

Window Treatment Elevations and Specifications

Architect`s Guide

JCP Spec Fin - Cutting Edge Drapery

San Antonio Express-News article: "Hidden Theaters"

Ceiling Medallions - Trim-Tex

Ripple Fold Drapery - Brochure

Introducing the First and Only Motorized Drapery Rods

EPC-A-1 Emergency Power Relay

Branda in Consumer Electronics Sector