ArcelorMittal Poland 03.06.2014

ArcelorMittal Poland
03.06.2014
ArcelorMittal Poland
• 6 locations – 5 steel plants and the
largest coke plant in Europe located in
Zdzieszowice
• 70 per cent of Polish steel market
potential
• Over 11.000 employees, 14,000 including
subsidiaries
Warszawa
• Investments worth over PLN 5 bn
• The largest investment in European hot
rolling for 20 years: HOT STRIP MILL in
Kraków – PLN 1.2 bn (USD 400 m)
• Technology for highly processed products
and advanced steel grades
• CR projects of PLN 12 m
• 500.000 trees planted
Zdzieszowice
Chorzów
Dą
ąbrowa Górnicza
Świę
ętochłłowice
Sosnowiec
Kraków
Investments above all
Our investments 2004-2008
Value: PLN 3.8bn
Modernisation of wire rod mill
in Sosnowiec – PLN 140 m
2 new coke oven batteries
in ZK Zdzieszowice
– PLN 364 m
Construction of CCM3
in Dą
ąbrowa Górnicza – PLN 488 m
Construction
of hot strip mill in
Kraków – PLN 1.2 bn
New organic coating
line in Świę
ętochłłowice
– PLN 107 m
Modernisation of blast furnace no. 2
in Dą
ąbrowa Górnicza – PLN 260 m
3
2009 – Despite the crisis we invested PLN 270 m
Control and measurement block
for rail inspection in Dąbrowa Górnicza
• Investment of PLN 23 m
• New block can inspect rails of up to
75 m long at 1.5 metres per second
Modernisation of cold rolling mill in Kraków
• Investment of nearly PLN 98 m based on
state-of-the-art technologies increasing
parameters of cold rolled sheets.
• Modern solutions ensuring excellent
tolerance of thickness and high flatness
of cold rolled sheets.
• Modernisation covered pickling line,
4-stand rolling mill and temper mill
2010 – Despite the crisis we invested PLN 270 m
Twin ladle furnace in Dąbrowa Górnicza
• Investment of nearly PLN 120 m
• Processing in ladle furnace allows to
increase parameters of quality steel
used by automotive,
construction and household
appliances industries.
Strip surface inspection system
in hot strip mill in Kraków
• Investment of PLN 2 m
• Software recognising possible defects and
faults significantly increases control
over product quality and allows to
decrease volume of scrap appearing during
visual inspection of production
line.
2011-2012 We carry on investing
2 hot metal desulphurisation
stations in Dąbrowa Górnicza
• Investment of PLN 24 m
• Total annual production capacity of 6 m tonnes
• Equipment will improve
parameters of steel used
for production of household appliances
and in automotive industry
Modernization of sinter belt no. 2 in
Dąbrowa Górnicza
• Investment of PLN 90 m
• Production capacity of sinter increased
• Two modern electrostatic precipitators
allowed for significant reduction of dust
emissions
2011-2012 We carry on investing
PCI installation to blast furnace no. 2 in
Dąbrowa Górnicza
• Investment value: PLN 30 m
• Optimized production costs of hot metal
used for production of steel
• Production of PCI is more environmentally
friendly than coke production
New ladle workshop at the steel
shop in Dąbrowa Górnicza
• Investment value: PLN 15.5 m
• Shorter steel production time
• Lower energy consumption and
improvement of environmental footprint
2011-2014 We carry on investing
Coke gas cleaning installation in
Kraków
• New, waste-free technology of cleaning coke
gas enables us to produce sulphur with a
purity of 99,9% and eliminate hazardous
substances from the process;the installation
meets the requirements of BAT (Best
Available Techniques)
• Cost: PLN 100 m
New torpedo ladles for transport of hot metal to
Kraków’s steel plant
•Replacement of the open ladles significantly
reduced heat losses during transportation, thus
eliminating the need to heat the hot metal at the
steel plant; the investment also resulted in
significant reduction of carbon dioxide emissions
Cost: PLN 36 m
2011-2014 We carry on investing
Long rail project (120 meters)
• This strategic project will contribute to the modernization of
Polish railway infrastructure
• Due to lower number of joints between rails it will significantly
improve safety in railway transport.
• ArcelorMittal Poland is one out of three companies in the world
producing the long rail
• Cost: PLN 140 m
ArcelorMittal is a bold company, not afraid to take up new initiatives. I hope that the new
installation will support infrastructure development in our country – Deputy Prime Minister,
Minister of Economy Mr Janusz Piechociń
ński
2011-2014 We carry on investing
Sheet piles service centre in Dąbrowa
Górnicza
• The project focuses specifically on growth
with the aim of strengthening ArcelorMittal
Poland’s position both within the group and
in the external market.
• The service centre, which has an annual
capacity of 85,000 tonnes, provides a
handling system for pairing, crimping and
cutting sheet piles.
• The decision to create it was based on
high market demand for new types of piles.
• Cost: EUR 14 m
2011-2014 We carry on investing
Other important ivestment
projects in 2013-2014
Revamp of blast furnace no. 2 and 3
in Dąbrowa Górnicza
Modernization of basic oxygen
furnace no.2 in Dąbrowa Górnicza
Construction of new waste water
treatment plant in Kraków’s coke plant
The modernization of by-products
department in Zdzieszowice coke
plant
Corporate responsibility
Making safe sustainable steel
Safety is our priority
Our „Journey to zero”
• Consciousness
management programme –
talks with employees,
behaviour audits
• International Health & Safety
Day at ArcelorMittal
• Working Conditions
Improvement – renovations
of changing rooms and
canteens
• Modifications of PPE
• Health: vaccinations, healthy
lifestyle promotion, medical
examinations
Environmental protection – we are committed to social
dialogue
Green officer
•
•
•
Direct communication channel with
communities
In regular contact with WIOŚ (Voivedship
Inspectorate for Environmental Protection)
24h ecological toll-free line
Meetings with the inhabitants of the
districts neighbouring the plants
•Informing on changes that occur within the plant,
both technological and organizational ones, as well
as on their impact on the environment
•The inhabitants receive answers to their questions
directly from the management of the company
•Visit at the plants
Investing in our employees
• Mentoring: Preparing
ArcelorMittal mentors
for newly hired young
engineers
• Project aimed at
training managers:
from shift foreman to
Unit director
• Creating knowledge
base: necessary for
future managers
• Tailor-made courses
aimed at enhancing
managerial skills –
coaching, team work,
analytical and
innovative thinking Over
1,000 graduates so far
• Preserving expertise
and experience within
the organization
• As an international
company we realize
how important the
knowledge of foreign
languages is
• We offer our employees
1-to-1, group and
online courses of
English
Investing in our people
• We have set up two
company kindergartens for
our employees’ children.
The first one was
inaugurated in Dąbrowa
Górnicza in September
2011, the other one in
Kraków in 2012.
• Each foreseen for 100
children
• Initiative of Women’s
Council
• Necessity confirmed by
results of survey carried out
among our employees of
two largest units – 90%
interested.
We enrich our communities
• In total 12 m PLN invested in social projects
• We support interesting, innovative and efficient
solutions in areas such as education, environment,
healthcare, art and culture, sport and volunteer
work.
Examples of projects:
• Over 40 multimedia laboratories at schools in
Silesia, Małopolskie and Opolskie provinces
• Endoscopy laboratory in a hospital in Sosnowiec
• Support for specialist hospitals in Siemianowice
and Piekary Śląskie
• Fire engine in Dąbrowa Górnicza
• Construction of football pitch at primary school in
Zdzieszowice
• Music therapy laboratory in Chorzów
• Numerous promotional actions for blood and bone
marrow donations in Kraków, Dąbrowa Górnicza,
Katowice and Zdzieszowice
Thank you