Connecting load cells directly to MELSEC Q series. External signal

210
210
External Dimensions
July 2009
Q61LD
Q61LD
RUN
Mitsubishi Programmable Controller
ALM
ERR.
EXC+
NC
S+
NC
98 (3.86)
EXCNC
SNC
SIG+
NC
SIGNC
NC
SLD
NC
NC
NC
(FG)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Q61LD
Load Cell Input Module
Q61LD
4 (0.16)
23
(0.92)
90 (3.54)
27.4
(1.08)
No. 319E
Unit: mm (inch)
Connecting load cells directly to MELSEC Q series.
External signal converters are no longer required.
Point1
All load cells* can be connected directly.
An external signal converter is not required. Man-hours and costs are reduced by using
a load cell input module that can be connected directly to a programmable controller.
Product List
Product name
Load cell input module
Model
Model code
Q61LD
1W4611
Point2
S+
EXCSSIG+
Highly accurate measurement is now possible.
SIG-
The module achieves a highly accurate measurement with steady data
conversion speed that guarantees the accuracy of load cells.
Nonlinear accuracy: Within ±0.01%/FS
Point3
Enhanced convenience with the various functions.
Tel/Fax
Country/Region
Sales office
Tel/Fax
USA
Mitsubishi Electric Automation Inc.
500 Corporate Woods Parkway, Vernon Hills, IL 60061, USA
Tel: +1-847-478-2100
Fax: +1-847-478-0327
Taiwan
Tel: +55-11-3146-2200
Fax: +55-11-3146-2217
Tel: +886-2-2299-2499
Fax: +886-2-2299-2509
Korea
Setsuyo Enterprise Co., Ltd.
6F., No.105 Wu-Kung 3rd.Rd, Wu-Ku Hsiang,
Taipei Husien 248, Taiwan
Mitsubishi Electric Europe B.V. German Branch
Gothaer Strasse 8, D-40880 Ratingen, Germany
Tel: +49-2102-486-0
Fax: +49-2102-486-1120
Singapore
Mitsubishi Electric Asia Pte, Ltd.
307 Alexandra Road #05-01/02,
Mitsubishi Electric Building Singapore 159943
Tel: +65-6470-2460
Fax: +65-6476-7439
Mitsubishi Electric Europe B.V. Italy Branch
Viale Colleoni 7-20041 Agrate Brianza (Milano), Italy
Tel: +39-039-60531
Fax: +39-039-6053312
P.T. Autoteknindo Sumber Makmur
Muara Karang Selatan Block A/Utara No.1 Kav.
No.11, Kawasan Industri Pergudangan, Jakarta-Utara 14440,
P.O. Box 5045 Jakarta 11050, Indonesia
Tel: +62-21-663-0833
Fax: +62-21-663-0832
Mitsubishi Electric Australia Pty. Ltd.
348 Victoria Road, Rydalmere, N.S.W. 2116, Australia
Tel: +61-2-9684-7777
Fax: +61-2-9684-7245
Brazil
Germany
UK
Italy
Spain
France
South Africa
Hong Kong
China
MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda.
Av Paulista, 1439-Cj. 72 Cerqueira Cesar CEP 01311-200,
Sao Paulo, SP, CEP: 01311-200, Brazil
Mitsubishi Electric Europe B.V. UK Branch
Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, UK
Mitsubishi Electric Europe B.V. Spanish Branch
Carretera de Rubi 76-80
E-08190 Sant Cugat del Valles (Barcelona), Spain
Tel: +44-1707-276100
Fax: +44-1707-278992
Tel: +34-93-565-3131
Fax: +34-93-589-1579
Mitsubishi Electric Europe B.V. French Branch
Tel: +33-1-5568-5568
25, Boulevard des Bouvets, F-92741 Nanterre Cedex, France Fax: +33-1-5568-5757
Circuit Breaker Industries Ltd.
Private Bag 2016, ZA-1600 Isando, South Africa
Mitsubishi Electric Automation (Hong Kong) Ltd.
10/F, Manulife Tower, 169 Electric Road, North Point,
Hong Kong
Tel: +27-11-928-2000
Fax: +27-11-392-2354
Tel: +852-2887-8870
Fax: +852-2887-7984
Thailand
Indonesia
India
Australia
Mitsubishi Electric Automation Korea Co., Ltd.
1480-6, Gayang-dong, Gangseo-gu, Seoul
157-200, Korea
Tel: +82-2-3660-9552
Fax: +82-2-3664-8372
Mitsubishi Electric Automation (Thailand) Co., Ltd.
Bang-Chan Industrial Estate No.111 Soi Serithai 54,
T.Kannayao, A.Kannayao, Bangkok 10230 Thailand
Tel: +66-2-517-1326
Fax: +66-2-517-3239
Messung Systems Pvt., Ltd.
Electronic Sadan NO: III Unit No.15, M.I.D.C. Bhosari,
Pune-411026, India
Tel: +91-20-2712-3130
Fax: +91-20-2712-8108
Zero offset function
Two-point calibration function
Input signal error detection function, etc.
FG
10
11
12
13
14
15
16
17
18
Measuring device
Increased functionality.
Sales office
SLD
Q61LD
Zero drift: Within ±0.25 μV/℃ RTI
Gain drift: Within ±15 ppm/℃
Country/Region
Q61LD
EXC+
Load cell
Direct
connection
Mitsubishi Electric Automation (Shanghai) Ltd.
Tel: +86-21-2322-3030
17/F Chong Hing Finance Center, No.288 West Nanjing Road, Fax: +86-21-2322-3000
Shanghai 200003, China
HEAD OFFICE: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS: 1-14, YADAMINAMI 5, HIGASIKU, NAGOYA, JAPAN
0907 (MDOC)
Specifications subject to change without notice.
Printed in Japan on recycled paper.
*Within 5 V DC of applied voltage, and 60 mA of output current
(4 units can be connected in parallel with 350 Ω type load cells)
DIC-204
210
210
Performance Specification
Features
Point1 All load cells* can be connected directly to MELSEC Q series.
Item
An external signal converter is no longer required by the direct connection of load cells and a programmable controller.
· Any type of load cell* such as magnetostriction, capacitance, gyroscope, strain gauge, can be connected.
· 6-wire system (combination use of remote sensing method and ratiometric method) or 4-wire system load cells can be connected.
Formerly:
With Q61LD module:
Serial communication module
0.0 to 3.3 mV/V
5 V DC ±5%, Output current within 60 mA (Four 350 Ω load cells can be connected in parallel.)
6-wire system (Combination use of remote sensing method and ratiometric method)
Load cell applied voltage
Digital output
32-bit signed binary, 0 to 10000
32-bit signed binary, -99999 to 99999 (Excluding decimal point and unit symbol)
Gross weight output (Maximum weighing output value)
0.0 to 3.0 mV/V
Gain adjustment range
0.3 to 3.2 mV/V
Analog input range (load cell rated output)
0.0 to 1.0 mV/V, 0.0 to 2.0 mV/V, 0.0 to 3.0 mV/V
Analog input range
Direct
connection
I/O characteristics, Maximum resolution
Addition box
(Connection box)
Addition box
(Connection box)
Analog input (load cell output)
1 point (1 channel)
Zero adjustment range
Q61LD
External signal
converter
Specification
Analog input (load cell output) points
Up to 4 load cell units
can be connected
in parallel
An external signal converter
is not required.
Accuracy
(Accuracy relative to analog input
(load cell rated output) of a module)
Load cell
rated output
0 to 1.0 mV/V
0 to 2.0 mV/V
Point2
Since high performances of load cells are offered by connecting directly
to a programmable controller, this module can be applied to a system
that requires high accuracy.
Dielectric withstand voltage
· Nonlinear accuracy: Within ±0.01%/FS
· Zero drift: Within ±0.25 μV/℃ RTI
· Gain drift: Within ±15 ppm/℃
Point3
Nonlinear accuracy
5 mV
Load cell output value
A function to subtract the tare weight automatically
in accordance with the load cell usage range
when calibrating the measuring device.
The accuracy of the measuring device can be
improved.
18-point terminal block
Applicable wire size
0.3 to 0.75 mm2
R1.25-3 (Sleeved solderless terminal cannot be used)
Applicable solderless terminal
Internal current consumption (5 V DC)
Item
Description
Offsets the tare weight of load cell outputs automatically and adjusts the load cell output value for the case
of the maximum weighing capacity automatically to the optimum value within an input range.
Corrects gravitational errors caused by the difference of gravitational acceleration in each region when the places
of the calibrated weigh scale and the installed weigh scale are different.
When installing and calibrating the weigh scale at a same place, the setting is not required.
Adjusts the Q61LD to work with load cells. For using the Q61LD as a weigh scale,
Adjusts the Q61LD to make the gross weight output value be accurate, when an actual load is placed.
Zero offset*
Executes one of the following processing for gross weight output values and digital output values, resulting in averaging
unbalanced output values.
(1) Sampling processing
(2) Count average processing
(3) Moving average processing
(4) Combination use of count average and moving average
Weight conversion method
Material
Fill the container and
start measuring.
The zero tracking function is the function that automatically corrects a slow zero drift, in other words, corrects a subtle
variation of the zero point. Time and a variation range determine the zero tracking function.
Performs a zero point adjustment of a weigh scale.
Adjusts the zero point when the zero point moves after two-point calibration of the weigh scale is performed.
Zero tracking function
Input signal error detection function
Subtracts the tare weight automatically.
Two-point calibration function
Input signal error detection function
Load cells are loaded with
the actual load (weight) and
the gross weight value is
calibrated accurately.
Errors of signals input from load cells can be detected.
· Input signal error
· Excess of weighing capacity error
· Outside the zero point range error
· Excess of conversion error
Two-point calibration
function
Actual load
(weight)
0.48 A
98 (3.86) (H) × 27.4 (1.08) (W) × 90 (3.54) (D) [mm (inch)]
0.17 kg
Zero set/reset function
Measures the container (tare)
without the material.
Photocoupler insulation
16 points (I/O assignment: Intelligent 16 points)
External connection system
Two-point calibration function*
Zero offset function
Container
(tare)
Maximum 1012 times
Between input terminal and programmable controller power supply: 500 V DC, 10 MΩ or more
Number of occupied I/O points
Gravitational acceleration
compensation function*
10 mV
Enhanced convenience with the various functions.
Zero offset function
1.5 μV
Function List
Within ±0.01%/FS
0
0 mV
Insulation resistance
Weight
Digital
output 5000
value
(When the load cell rated output is 2 mV/V, the ambient temperature is 25℃, and the tare weight
subtraction function is not used.)
1.0 μV
0.5 μV
Between input terminal and programmable controller power supply: 500 V AC/min.
External dimensions
10000
-99999 to 99999
10 ms
Insulation method
High-accuracy measurement is now possible by the direct connection
of load cells and a programmable controller.
0 to 10000
±2.5 V
Number of writes to involatile memory (FeRAM)
*Within 5 V DC of applied voltage, and 60 mA of output current.
(4 units can be connected in parallel with 350 Ω type load cells)
Maximum resolution
Nonlineality: Within ±0.01%/FS (Ambient temperature: 25℃)
Zero drift: Within ±0.25 μV/℃ RTI
Gain drift: Within ±15 ppm/℃
Absolute maximum input
Load cells
Maximum weighing
capacity output value
0 to 3.0 mV/V
Conversion speed
Load cells
Digital output value
Q61LD
RUN
ERR.
ALM
Warning output function
1/4 scale function
ALM
Stable status
Maximum and minimum values hold function
Output value hold function
(1) If a gross weight output value exceeds the ninth scales, the bit corresponding to Excess of weighing capacity (1)
of the input signal error detection flag will be turned on.
(2) If the zero set of gross weight output values exceeding the zero point adjustment range is executed, the bit
corresponding to Outside the zero point range (1) will be turned on.
(3) If a gross weight output value exceeds the given upper limit range, the bit corresponding to Input signal error (1)
will be turned on.
(4) If an analog input (load cell output) that exceeds the conversion range during the two-point calibration mode,
the bit corresponding to Excess of input values to be converted (1) will be turned on.
Determines the upper limit and lower limit values of gross weight output values.
(1) Lower limit: Determines the status of "Gross weight output value Gross weight lower lower limit value".
(2) Upper limit: Determines the status of "Gross weight output value Gross weight upper upper limit value".
Detects a mid-value of scales of gross weight output values.
Divides a minimum division in quarters and turns on Center point status (X2) if the mid-value is within the setting range.
If the changed value of a gross weight output value has been within the setting value and the status has remained
for the setting time or longer, Stable status (X1) will be turned on. The stable status is set with the variation range and time.
Stores the maximum and minimum values of gross weight output values and digital output values into the Q61LD.
Holds a gross weight output value and digital output values temporarily.
The output value does not change during the hold regardless of the change of load cell output signals.
* These functions are saved to the nonvolatile memory (FeRAM) of the Q61LD, thereby, the data will not be cleared even when the Q61LD is powered off.
1
2
DIC-221
210
210
Performance Specification
Features
Point1 All load cells* can be connected directly to MELSEC Q series.
Item
An external signal converter is no longer required by the direct connection of load cells and a programmable controller.
· Any type of load cell* such as magnetostriction, capacitance, gyroscope, strain gauge, can be connected.
· 6-wire system (combination use of remote sensing method and ratiometric method) or 4-wire system load cells can be connected.
Formerly:
With Q61LD module:
Serial communication module
0.0 to 3.3 mV/V
5 V DC ±5%, Output current within 60 mA (Four 350 Ω load cells can be connected in parallel.)
6-wire system (Combination use of remote sensing method and ratiometric method)
Load cell applied voltage
Digital output
32-bit signed binary, 0 to 10000
32-bit signed binary, -99999 to 99999 (Excluding decimal point and unit symbol)
Gross weight output (Maximum weighing output value)
0.0 to 3.0 mV/V
Gain adjustment range
0.3 to 3.2 mV/V
Analog input range (load cell rated output)
0.0 to 1.0 mV/V, 0.0 to 2.0 mV/V, 0.0 to 3.0 mV/V
Analog input range
Direct
connection
I/O characteristics, Maximum resolution
Addition box
(Connection box)
Addition box
(Connection box)
Analog input (load cell output)
1 point (1 channel)
Zero adjustment range
Q61LD
External signal
converter
Specification
Analog input (load cell output) points
Up to 4 load cell units
can be connected
in parallel
An external signal converter
is not required.
Accuracy
(Accuracy relative to analog input
(load cell rated output) of a module)
Load cell
rated output
0 to 1.0 mV/V
0 to 2.0 mV/V
Point2
Since high performances of load cells are offered by connecting directly
to a programmable controller, this module can be applied to a system
that requires high accuracy.
Dielectric withstand voltage
· Nonlinear accuracy: Within ±0.01%/FS
· Zero drift: Within ±0.25 μV/℃ RTI
· Gain drift: Within ±15 ppm/℃
Point3
Nonlinear accuracy
5 mV
Load cell output value
A function to subtract the tare weight automatically
in accordance with the load cell usage range
when calibrating the measuring device.
The accuracy of the measuring device can be
improved.
18-point terminal block
Applicable wire size
Applicable solderless terminal
Internal current consumption (5 V DC)
Item
Description
Zero offset*
Executes one of the following processing for gross weight output values and digital output values, resulting in averaging
unbalanced output values.
(1) Sampling processing
(2) Count average processing
(3) Moving average processing
(4) Combination use of count average and moving average
Weight conversion method
Material
Fill the container and
start measuring.
The zero tracking function is the function that automatically corrects a slow zero drift, in other words, corrects a subtle
variation of the zero point. Time and a variation range determine the zero tracking function.
Performs a zero point adjustment of a weigh scale.
Adjusts the zero point when the zero point moves after two-point calibration of the weigh scale is performed.
Zero tracking function
Subtracts the tare weight automatically.
Two-point calibration function
Input signal error detection function
Load cells are loaded with
the actual load (weight) and
the gross weight value is
calibrated accurately.
Errors of signals input from load cells can be detected.
· Input signal error
· Excess of weighing capacity error
· Outside the zero point range error
· Excess of conversion error
Actual load
(weight)
0.48 A
98 (3.86) (H) × 27.4 (1.08) (W) × 90 (3.54) (D) [mm (inch)]
Offsets the tare weight of load cell outputs automatically and adjusts the load cell output value for the case
of the maximum weighing capacity automatically to the optimum value within an input range.
Corrects gravitational errors caused by the difference of gravitational acceleration in each region when the places
of the calibrated weigh scale and the installed weigh scale are different.
When installing and calibrating the weigh scale at a same place, the setting is not required.
Adjusts the Q61LD to work with load cells. For using the Q61LD as a weigh scale,
Adjusts the Q61LD to make the gross weight output value be accurate, when an actual load is placed.
Input signal error detection function
Two-point calibration
function
0.3 to 0.75 mm2
R1.25-3 (Sleeved solderless terminal cannot be used)
0.17 kg
Zero set/reset function
Measures the container (tare)
without the material.
Photocoupler insulation
16 points (I/O assignment: Intelligent 16 points)
External connection system
Two-point calibration function*
Zero offset function
Container
(tare)
Maximum 1012 times
Between input terminal and programmable controller power supply: 500 V DC, 10 MΩ or more
Number of occupied I/O points
Gravitational acceleration
compensation function*
10 mV
Enhanced convenience with the various functions.
Zero offset function
1.5 μV
Function List
Within ±0.01%/FS
0
0 mV
Insulation resistance
Weight
Digital
output 5000
value
(When the load cell rated output is 2 mV/V, the ambient temperature is 25℃, and the tare weight
subtraction function is not used.)
1.0 μV
0.5 μV
Between input terminal and programmable controller power supply: 500 V AC/min.
External dimensions
10000
-99999 to 99999
10 ms
Insulation method
High-accuracy measurement is now possible by the direct connection
of load cells and a programmable controller.
0 to 10000
±2.5 V
Number of writes to involatile memory (FeRAM)
*Within 5 V DC of applied voltage, and 60 mA of output current.
(4 units can be connected in parallel with 350 Ω type load cells)
Maximum resolution
Nonlineality: Within ±0.01%/FS (Ambient temperature: 25℃)
Zero drift: Within ±0.25 μV/℃ RTI
Gain drift: Within ±15 ppm/℃
Absolute maximum input
Load cells
Maximum weighing
capacity output value
0 to 3.0 mV/V
Conversion speed
Load cells
Digital output value
Q61LD
RUN
ERR.
ALM
Warning output function
1/4 scale function
ALM
Stable status
Maximum and minimum values hold function
Output value hold function
(1) If a gross weight output value exceeds the ninth scales, the bit corresponding to Excess of weighing capacity (1)
of the input signal error detection flag will be turned on.
(2) If the zero set of gross weight output values exceeding the zero point adjustment range is executed, the bit
corresponding to Outside the zero point range (1) will be turned on.
(3) If a gross weight output value exceeds the given upper limit range, the bit corresponding to Input signal error (1)
will be turned on.
(4) If an analog input (load cell output) that exceeds the conversion range during the two-point calibration mode,
the bit corresponding to Excess of input values to be converted (1) will be turned on.
Determines the upper limit and lower limit values of gross weight output values.
(1) Lower limit: Determines the status of "Gross weight output value Gross weight lower lower limit value".
(2) Upper limit: Determines the status of "Gross weight output value Gross weight upper upper limit value".
Detects a mid-value of scales of gross weight output values.
Divides a minimum division in quarters and turns on Center point status (X2) if the mid-value is within the setting range.
If the changed value of a gross weight output value has been within the setting value and the status has remained
for the setting time or longer, Stable status (X1) will be turned on. The stable status is set with the variation range and time.
Stores the maximum and minimum values of gross weight output values and digital output values into the Q61LD.
Holds a gross weight output value and digital output values temporarily.
The output value does not change during the hold regardless of the change of load cell output signals.
* These functions are saved to the nonvolatile memory (FeRAM) of the Q61LD, thereby, the data will not be cleared even when the Q61LD is powered off.
1
2
DIC-221
210
210
External Dimensions
July 2009
Q61LD
Q61LD
RUN
Mitsubishi Programmable Controller
ALM
ERR.
EXC+
NC
S+
NC
98 (3.86)
EXCNC
SNC
SIG+
NC
SIGNC
NC
SLD
NC
NC
NC
(FG)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Q61LD
Load Cell Input Module
Q61LD
4 (0.16)
23
(0.92)
90 (3.54)
27.4
(1.08)
No. 319E
Unit: mm (inch)
Connecting load cells directly to MELSEC Q series.
External signal converters are no longer required.
Point1
All load cells* can be connected directly.
An external signal converter is not required. Man-hours and costs are reduced by using
a load cell input module that can be connected directly to a programmable controller.
Product List
Product name
Load cell input module
Model
Model code
Q61LD
1W4611
Point2
S+
EXCSSIG+
Highly accurate measurement is now possible.
SIG-
The module achieves a highly accurate measurement with steady data
conversion speed that guarantees the accuracy of load cells.
Nonlinear accuracy: Within ±0.01%/FS
Point3
Enhanced convenience with the various functions.
Tel/Fax
Country/Region
Sales office
Tel/Fax
USA
Mitsubishi Electric Automation Inc.
500 Corporate Woods Parkway, Vernon Hills, IL 60061, USA
Tel: +1-847-478-2100
Fax: +1-847-478-0327
Taiwan
Tel: +55-11-3146-2200
Fax: +55-11-3146-2217
Tel: +886-2-2299-2499
Fax: +886-2-2299-2509
Korea
Setsuyo Enterprise Co., Ltd.
6F., No.105 Wu-Kung 3rd.Rd, Wu-Ku Hsiang,
Taipei Husien 248, Taiwan
Mitsubishi Electric Europe B.V. German Branch
Gothaer Strasse 8, D-40880 Ratingen, Germany
Tel: +49-2102-486-0
Fax: +49-2102-486-1120
Singapore
Mitsubishi Electric Asia Pte, Ltd.
307 Alexandra Road #05-01/02,
Mitsubishi Electric Building Singapore 159943
Tel: +65-6470-2460
Fax: +65-6476-7439
Mitsubishi Electric Europe B.V. Italy Branch
Viale Colleoni 7-20041 Agrate Brianza (Milano), Italy
Tel: +39-039-60531
Fax: +39-039-6053312
P.T. Autoteknindo Sumber Makmur
Muara Karang Selatan Block A/Utara No.1 Kav.
No.11, Kawasan Industri Pergudangan, Jakarta-Utara 14440,
P.O. Box 5045 Jakarta 11050, Indonesia
Tel: +62-21-663-0833
Fax: +62-21-663-0832
Mitsubishi Electric Australia Pty. Ltd.
348 Victoria Road, Rydalmere, N.S.W. 2116, Australia
Tel: +61-2-9684-7777
Fax: +61-2-9684-7245
Brazil
Germany
UK
Italy
Spain
France
South Africa
Hong Kong
China
MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda.
Av Paulista, 1439-Cj. 72 Cerqueira Cesar CEP 01311-200,
Sao Paulo, SP, CEP: 01311-200, Brazil
Mitsubishi Electric Europe B.V. UK Branch
Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, UK
Mitsubishi Electric Europe B.V. Spanish Branch
Carretera de Rubi 76-80
E-08190 Sant Cugat del Valles (Barcelona), Spain
Tel: +44-1707-276100
Fax: +44-1707-278992
Tel: +34-93-565-3131
Fax: +34-93-589-1579
Mitsubishi Electric Europe B.V. French Branch
Tel: +33-1-5568-5568
25, Boulevard des Bouvets, F-92741 Nanterre Cedex, France Fax: +33-1-5568-5757
Circuit Breaker Industries Ltd.
Private Bag 2016, ZA-1600 Isando, South Africa
Mitsubishi Electric Automation (Hong Kong) Ltd.
10/F, Manulife Tower, 169 Electric Road, North Point,
Hong Kong
Tel: +27-11-928-2000
Fax: +27-11-392-2354
Tel: +852-2887-8870
Fax: +852-2887-7984
Thailand
Indonesia
India
Australia
Mitsubishi Electric Automation Korea Co., Ltd.
1480-6, Gayang-dong, Gangseo-gu, Seoul
157-200, Korea
Tel: +82-2-3660-9552
Fax: +82-2-3664-8372
Mitsubishi Electric Automation (Thailand) Co., Ltd.
Bang-Chan Industrial Estate No.111 Soi Serithai 54,
T.Kannayao, A.Kannayao, Bangkok 10230 Thailand
Tel: +66-2-517-1326
Fax: +66-2-517-3239
Messung Systems Pvt., Ltd.
Electronic Sadan NO: III Unit No.15, M.I.D.C. Bhosari,
Pune-411026, India
Tel: +91-20-2712-3130
Fax: +91-20-2712-8108
Zero offset function
Two-point calibration function
Input signal error detection function, etc.
FG
10
11
12
13
14
15
16
17
18
Measuring device
Increased functionality.
Sales office
SLD
Q61LD
Zero drift: Within ±0.25 μV/℃ RTI
Gain drift: Within ±15 ppm/℃
Country/Region
Q61LD
EXC+
Load cell
Direct
connection
Mitsubishi Electric Automation (Shanghai) Ltd.
Tel: +86-21-2322-3030
17/F Chong Hing Finance Center, No.288 West Nanjing Road, Fax: +86-21-2322-3000
Shanghai 200003, China
HEAD OFFICE: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS: 1-14, YADAMINAMI 5, HIGASIKU, NAGOYA, JAPAN
0907 (MDOC)
Specifications subject to change without notice.
Printed in Japan on recycled paper.
*Within 5 V DC of applied voltage, and 60 mA of output current
(4 units can be connected in parallel with 350 Ω type load cells)
DIC-204