ironhead xl - GUTSCHROME

Transcription

IRONHEAD XL
SEATS &
SISSY BARS
COPPER CORE
8.8MM SPARK
PLUG WIRE SETS
•Constructed with
silicone throughout the
jacket to deliver high‑
temperature resistance
•Rated at SAE Class E
J2031 with a continuous
operating temperature
of 450°F
•Copper core wires should be used on bikes
with magneto‑ or points‑style ignitions
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
2104‑0137 For 71‑E78 XL
$20.95
2104‑0136 For 58‑69 XL w/ a magneto
22.95
•The industry’s best braid is available in
Sterling Chromite®, Polished Stainless,
metallic red and metallic blue
•Braid perfectly matches all other Magnum
cables and brake lines
•High‑voltage, high temperature 8mm silicone
ignition wire with an OE style high‑performance
suppression conductor core for guaranteed
compatibility with all H‑D ignition systems
•Heavy walled extreme duty crystal clear FEP
Fluoropolymer outer insulation eliminates the need
for grounding wires and ensures no interference
with late model computer modules
•Posi‑lock spring clip terminals and silicone boots
ensure maximum performance and clean
spark delivery
•OE direct fitments for ease of installation
•Made in the USA
PART #
EXHAUST
0802‑3024
BRAIDED SPARK PLUG WIRES
CARBURETORS
& AIR FILTERS
2104‑0097
ENGINE
2104‑0035
TRANSMISSION
& DRIVELINE
2104‑0036
DESCRIPTION
SUG. RETAIL
GASKETS
& SEALS
FOR 65‑85 XL
0802‑3024
2104‑0097
2104‑0035
2104‑0036
Sterling Chromite II
Polished stainless
Candy apple red
Candy apple blue
$60.95
60.95
60.95
60.95
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
2104‑0264
2104‑0265
2104‑0267
2104‑0268
2104‑0269
2104‑0266
2104‑0270
2104‑0271
CLOTH SPARK PLUG WIRE SETS
•These plug wires are cotton‑braided and lacquered, but have a modern stranded copper
conductor with PVC insulation for top performance
•Each set consists of a full 48” of 7mm plug wire with the Rajah clips for your spark plugs, a pair
of rubber boots and a pair of high‑tension terminals for the ends of the wires
•Simply clip the wire to the needed length, put the boots and terminals on the end and install
on your coil or magneto
•Because these are not suppressor core wire, you could have radio interference with
accessories on bikes that are running electronic ignitions
SUG.
SUG.
PART #
2104‑0266
2104‑0267
2104‑0268
BRAKES
TRANSLUCENT PLUG WIRE SETS
DESCRIPTION
RETAIL
Red w/ black and yellow tracers $29.95
Oak w/ red and black tracers
29.95
Yellow w/ black and red tracers 29.95
PART #
2104‑0269
2104‑0270
2104‑0271
DESCRIPTION
Black w/ red tracers
Green w/ yellow tracers
Satin black
RETAIL
$29.95
29.95
29.95
•Silicone modern spark plug wire is
translucent, allowing you to see the copper
conductor core
•Each order consists of a full 48” of 7mm plug
wire with the rajah clips for your spark plugs,
a pair of rubber boots and a pair of high
tension terminals for the ends of the wires
•Simply clip the wire to the needed length,
put the boots and terminals on the end and
install on your coil or magneto
•Because these are not suppressor core
wire, you could have radio interference
with accessories on bikes that are running
electronic ignitions
PART #
2104‑0264
2104‑0265
DESCRIPTION
Clear
Translucent red
SUG. RETAIL
$29.95
29.95
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
FLOORBOARDS
& PEGS
HARDWARE
162074
172074B
CUSTOM 8.8MM SPARK PLUG WIRE SETS
GENERAL
•Heavy‑duty 8.8mm silicone wire sets are cut to size and have copper core wire
FITS MODEL
For 71‑E78 XL, XLCH
For 58‑69 XL, XLCH (w/ magneto)
YELLOW
162074
162075
SUG. RETAIL
$26.95
26.99
ALL PART NUMBERS IN BLUE ARE NEW FOR 2014.
BLACK
172074B
172075B
SUG. RETAIL
$26.95
26.95
583
ironhead xl
seAts &
sissY bArs
2104‑0230
2104‑0229
2104‑0232
2104‑0231
eXhAust
2104‑0253
CArburetors
& Air filters
engine
iGniTion Wire KiTS
•Retro 7mm or 8mm ignition wire kits
•Fully insulated suppression core wires
(7mm) or copper core wires (8mm)
trAnsmission •24” L universal design
•Includes spark plug terminals and boots
& DriVeline
•Sold in pairs
2104‑0258
2104‑0255
2104‑0259
2104‑0256
2104‑0261
2104‑0257
2104‑0262
2104‑0260
FOR 79‑85 XL
gAskets
& seAls
PART #
eleCtriCAl
& lighting
2104‑0228
2104‑0229
2104‑0230
2104‑0231
2104‑0232
2104‑0253
2104‑0254
hAnDlebArs,
Controls &
mirrors
2104‑0254
2104‑0228
DESCRIPTION
SUG. RETAIL
7MM
PART #
DESCRIPTION
SUG. RETAIL
7MM (CONT)
Braided
Braided
Braided
Braided
Braided
Black
White
black
blue
red
yellow
white
$51.95
51.95
51.95
51.95
51.95
49.95
49.95
2104‑0255
2104‑0256
2104‑0257
2104‑0258
2104‑0259
2104‑0260
2104‑0261
2104‑0262
PART #
DESCRIPTION
SUG. RETAIL
8MM
Cardinal
Maize
Straw
Gold
Marigold
Green
Beige
Purple
$49.95
49.95
49.95
49.95
49.95
49.95
49.95
49.95
2104‑0248
2104‑0249
2104‑0250
2104‑0251
2104‑0252
Braided
Braided
Braided
Braided
Braided
black
blue
red
yellow
white
$51.95
51.95
51.95
51.95
51.95
CAbles
8MM CUSToM-Colored PlUG WireS
brAkes
oil tAnks,
filters &
gAs tAnks
DAshes
& gAuges
•Designer plug wire sets come in distinctive, highly visible colors
•Precut and have the plug/coil boots and terminals already installed
•Boots and wires are made from extra‑high‑temperature silicone, which gives protection up to 600°F
•Spiro‑Pro core provides up to 10 times the conductivity of a standard carbon‑core wire
•Low resistance means they run cooler and last 3‑4 times longer than carbon‑core wires
•Designed for electronic ignitions, but also work great on point types
•Sold in pairs
DS‑242347
FOR 65‑85 XL (90° BOOTS)
PART #
DESCRIPTION SUG. RETAIL
DS‑242132 Black
$28.95
DS‑242149 Red
28.95
PART #
DS‑242347 Purple
$28.95
DS‑242133 Yellow
28.95
PART #
DS‑242349 Blue
$28.95
DS‑242151 Hot orange
28.95
PART #
2104‑0091 Gray w/ black
boots
$28.95
ChAssis,
suspension,
fenDers
& wheels
SParK PlUG TerMinal nUTS
and rinG TerMinalS
floorboArDs
& pegs
SUG.
RETAIL
•These brass spark plug terminal nuts will fit any modern
spark plug with a removable top nut (Drag Specialties, NGK,
Champion and any other major brand)
•Also included are nickel‑plated Rajah ring terminals
•Add some vintage flair to your stock bike or your custom
bobber or chopper
•These are a screw‑on style; strip the end of your plug wire,
insert and screw the terminal on
•The ring terminal is held in place firmly with the brass spark
plug nut
•Includes two brass nuts and two Rajah ring terminals
$27.95
PART #
DESCRIPTION
2104‑0263 Brass spark plug terminal nuts and
nickel‑plated ring terminals
DS‑242165
hArDwAre
generAl
584
8.8MM SParK PlUG
Wire SeParaTor
CoPPer Core xxx
8MM SParK PlUG
Wire SeTS
•Copper core wire sets for
bikes with magneto or points type ignitions
•Rated at SAE CLASS E J2031 with a continuous
operating temperature of 450°F
SUG.
PART #
DESCRIPTION
DS‑242165 For 71‑E78 XL
DS‑242164 For 58‑69 XL w/ a magneto
RETAIL
$21.95
21.95
•Chrome billet T‑6
aluminum construction
•Holds wires apart for
a cleaner look
•Sold each
PART #
DESCRIPTION
2107‑2578 8.8mm spark
plug wire
separator
All pArt numbers in blue Are new for 2014.
SUG. RETAIL
$12.95
ironhead xl
2103-0205
seAts &
sissY bArs
PerForManCe SParK PlUGS
•Conventional style spark plugs, available in the OEM heat ranges
•Plugs have a unique look with their black ceramic body and bold red logo/script
•Insulator is made of 95% pure alumina; features strong resistance to heat
shock and superior insulation
•Multi-rib design of insulator eliminates flashover
•Nickel-plated housing prevents oxidation and corrosion
•Multilayer gaskets and heat-crimping process ensure a leak-free, gas-tight fit
•Copper core electrode prevents oxidation and corrosion and has good
electrical and heat conductivity for long spark plug service life
•Packaged in an attractive blister pack for easy display
•Sold in pairs
PART #
2103‑0205
2103‑0204
OEM #
4R5 (.030” gap)
4R5 (.040” gap)
DESCRIPTION
For 79-85 XL
For 79-85 XL
SUG. RETAIL
$6.95
6.95
PART #
2103‑0206
eXhAust
CArburetors
& Air filters
OEM #
5
DESCRIPTION
For 57-78 XL
SUG. RETAIL
$6.95
CoPPer PlUS™ reSiSTor
TYPe SParK PlUGS
trAnsmission
& DriVeline
•Copper Plus spark plug has a copper
core center electrode that allows
for accurate control of heat range,
optimizing performance, and longevity of the spark plug
•Patented SAC-9 semi-conductor resistor for maximum
EMI and RFI suppression
•Patented Ultraseal™ coated shell for rust prevention
•Sold each
GAP
.040”
.030”
DESCRIPTION
For 79-85 XL
For 165/175cc w/ 7/16 reach
gAskets
& seAls
SParK PlUGS
•Designed for a sharper, leaner spark with
tapered nickel/chrome alloy tip and copper
center electrode
•Sold each
NOTE: Order by Champion numbers.
PART #
RL‑82‑YC
RH8C
engine
SUG. RETAIL
$3.70
3.25
PART #
2103‑0117
AU‑4123
AU‑996
FITS MODEL
For 83-85 XR1000
For 79-85 XL
For 57-78 XL
eleCtriCAl
& lighting
SUG. RETAIL
$2.50
2.90
2.50
hAnDlebArs,
Controls &
mirrors
SParK PlUGS
•Superior construction for serious power
•NGK makes plugs for almost every
application and riding style
•Versatile plugs with wide operating heat
ranges prevent fouling from running too
cool and pre-ignition from running too hot
•Features include high alumina ceramics for improved
heat dissipation and electrical insulation, deep-seated
copper core for a wider heat range and a nickel alloy tip
for longer life
•Sold each
iridiUM ix SParK PlUG
•The ultimate in spark plug technology and performance
from the industry leader
•The iridium electrode is 25% smaller than a platinum
electrode, and it’s just 1/4 the size of a conventional
nickel electrode
•Ultra-small diameter center electrode reduces voltage
requirement and extends ignition system life
•Metal shell plating has enhanced anticorrosion qualities
•Sold each
PART #
BPR6EIX‑11
BPR6HIX
DESCRIPTION
For 83-85 XR 1000
For 79-85 XL
SUG. RETAIL
$10.95
10.95
e3 SParK PlUG
•Plug design features a
unique electrode shape that
maximizes the power created
by the spark plug – Diamond
Fire technology
•Electrode is a combination
of performance and new
technology that results in an
improved flame kernel shape
•This flame front ignites the bulk air/fuel mixture faster, moves
heat into the combustion chamber faster and creates a more
localized pressure front for faster pressure rise during the cylinder
power stroke
•The result is more complete combustion and an improvement in
engine performance
•A truly premium performance plug
•Sold each
PART #
2103‑0083
DESCRIPTION
For 83-85 XR 1000
SUG. RETAIL
$9.95
PART #
BPR6HS‑10
BPR6HS
BPR6ES‑11
B6L
DESCRIPTION
For 79-85 XL
For 79-85 XL
For 83-85 XR 1000
For 57-78 XL
CAbles
brAkes
SUG. RETAIL
$2.95
2.95
2.95
2.95
•Six times harder than platinum,
iridium doesn’t melt in
temperatures up to 4,000°F
•Because the plug’s iridium electrode
can shrink to only 0.4mm, voltage
requirements decrease while firing
performance improves
•360° laser welding of electrode
provides a seal that resists wear
IW20
even in the worst conditions
•Ground electrode features a tapered cut and U-groove that form
a large volume area for the flame’s center
•Use NGK reference chart to order and stock these plugs
•Sold each
1
NGK REFERENCE #
BPR6ES-11
BPR7EIX-11
Cooler plug.
DAshes
& gAuges
ChAssis,
suspension,
fenDers
& wheels
iridiUM SParK PlUGS
IRIDIUM PART #
IW20
IW221
oil tAnks,
filters &
gAs tAnks
DESCRIPTION
For 83-85 XR 1000
For 83-85 XR 1000
SUG. RETAIL
$10.95
10.95
floorboArDs
& pegs
hArDwAre
generAl
585
ironhead xl
2102‑0215
2102‑0217
seAts &
sissY bArs
eXhAust
12 VolT iGniTion CoilS
•Performance, quality and value
CArburetors •35,000V‑40,000V output
•Available with black or red molded body
& Air filters
PART #
2102‑0215
2102‑0216
COLOR
Black
Black
DESCRIPTION
5 ohm/points ignition/dual‑fire
4 ohm/electronic ignition/dual‑fire
SUG. RETAIL
$52.95
52.95
PART #
2102‑0217
COLOR
Red
DESCRIPTION
SUG. RETAIL
$52.95
engine
2102‑0220
trAnsmission
& DriVeline
12V iGniTion CoilS
gAskets
& seAls
•Increases peak spark voltage by 20% or more
•Improves starting, stops high‑speed misfires, increases mileage
and overall performance
•30,000V output
2102‑0227
•Available with black or chrome body
•2” on‑center mounting holes
eleCtriCAl
& lighting PART #
DESCRIPTION
SUG. RETAIL
BLACK
2102‑0213
2102‑0227
hAnDlebArs,
2102‑0228
Controls &
2102‑0226
mirrors
PART #
DESCRIPTION
SUG. RETAIL
CHROME
2.4 ohm/electronic ignition/single‑fire
$52.95
52.95
52.95
79.95
2102‑0220
2102‑0219
2102‑0221
4 ohm/dual‑fire
$52.95
52.95
52.95
2102‑0275
CAbles
brAkes
12V Mini dUal-Fire iGniTion CoilS
oil tAnks,
filters &
gAs tAnks
DAshes
& gAuges
•Improves overall performance including starting, stops, high‑speed misfires, and increases mileage
•30,000V output for all 70‑06 ignitions
•Peak spark voltage increases by at least 20%
•Smaller case for easier concealment (approximately 27/8” W x 23/4” T x 31/4” D)
•Available with black body
PART #
DESCRIPTION
2102‑0275 3 ohm/electronic ignition/dual‑fire;
repl. OEM #32614‑83A
SUG. RETAIL
$49.95
PART #
DESCRIPTION
2102‑0276 4 ohm/electronic ignition/dual fire
2102‑0277 5 ohm/points ignition/dual‑fire
SUG. RETAIL
$49.95
49.95
ChAssis,
suspension,
fenDers
& wheels
floorboArDs
& pegs
hArDwAre
generAl
586
dUal-Fire dUalToWer CoMPaCT
iGniTion Coil
12V BlUe STreaK®
iGniTion Coil
•Three‑ohm 12V coil features
a closed‑core design for
greater efficiency
•Produces far greater energy in a small package
than other popular high‑performance coils
•Can be used with any Compu‑Fire ignition system or
any ignition that calls for a 3‑ohm coil (except Dyna S
and points‑type ignitions)
•Sold each
•4.6‑ohm coil for models with
point ignition
•Feature 45,000V+ capacity for superior spark
•Heavy‑duty construction for long life
•Super‑fast rise time for better response
•Bolt directly to stock coil bracket
•Not for single‑fire ignitions
PART #
DS‑325467
DESCRIPTION
4.6‑ohm coil
SUG. RETAIL
$101.95
PART #
DS‑325689
DESCRIPTION
3‑ohm coil
SUG. RETAIL
$67.95
ironhead xl
140406
2102‑0105
seAts &
sissY bArs
12V “PoWer
PUlSe” Coil
•Offers higher
voltage, faster rise time
and longer spark duration
•Features vibration‑ and heat‑resistant
construction and accepts 7mm or 8mm spark
plug wires
hei “SUPer CoilS”
•12V “Super Coils” feature a unique look to match their
high‑tech performance and state‑of‑the‑art reliability
•Eye‑catching, bright yellow and black color
•Available for both electronic and points‑type ignitions
PART #
140407
140406
2102‑0105
COLOR
Yellow
Yellow
Black
DESCRIPTION
Dual‑fire w/ electronic ignition (2.3 ohm)
Dual‑fire for points‑type ignition (4.7 ohm)
Dual‑fire for points‑type ignition (4.7 ohm)
SUG. RETAIL
$119.95
109.95
109.95
PART #
140402
2102‑0260
2102‑0261
DESCRIPTION
Yellow
Black ‑ points 5 ohm
Black ‑ electronic 3 ohm
SUG. RETAIL
$99.95
99.95
99.95
eXhAust
CArburetors
& Air filters
engine
2102‑0205
trAnsmission
& DriVeline
2102‑0204
12V Coil
•The “industry standard” with 35,000V
spark energies second to none
•Designed to work with any Dyna
dual‑fire ignition system
PART #
DC7‑1
gAskets
& seAls
DESCRIPTION
5.0 ohm (black), straight dual output,
Std. H‑D style (points) (ea.)
SUG. RETAIL
$83.95
12V eleCTroniC
iGniTion
hiGh-oUTPUT
SinGle-Fire Coil
eleCtriCAl
& lighting
•The original Andrews ignition coil adds great performance with
a classic look
•Replacement coils deliver 30,000+ volts
•2.8 ohm coil fits electronic ignition/dual fire
•4.8 ohm coil fits points ignition/dual fire
•Produce more voltage than a stock coil
•Sold each
•The perfect complement for the S&S IST
ignition system
•This single‑fire coil is actually two separate
coils in a single package
•Works well with any single‑fire
ignition system
PART #
2102‑0021
12V SUPerVolT
iGniTion CoilS
PART #
DESCRIPTION
hAnDlebArs,
Controls &
mirrors
SUG. RETAIL
CAbles
FOR 57‑80 XL W/ POINTS IGNITION
2102‑0204
DESCRIPTION
3 ohm single‑fire coil
SUG. RETAIL
$139.95
4.8 ohm coil, black
$64.95
FOR 85 XL W/ ELECTRONIC IGNITION
2102‑0205
2.8 ohm coil, red
64.95
brAkes
140403
oil tAnks,
filters &
gAs tAnks
140403S
DAshes
& gAuges
2102‑0264
ChAssis,
suspension,
SUG. RETAIL
fenDers
$219.95
& wheels
UniVerSal “SUPer Coil” KiTS
•Extremely high output and available in one‑ and two‑coil versions
•12V, 3 ohm coils ideal for custom and dual‑plug applications; each
includes 9mm yellow plug or black wires
NOTE: Not for use with CDI ignitions or Twin Cam applications.
DESCRIPTION
Yellow two‑coil kit
Yellow one‑coil kit
Black one‑coil kit
119.95
119.95
floorboArDs
& pegs
ChroMe
Coil
CoVer
ChroMe
iGniTion
ModUle
CoVer
DESCRIPTION
For 82‑85 XL;
repl. OEM #66325‑82
SUG. RETAIL
$13.95
•Two‑piece
chrome coil cover
PART #
DS‑373612
DESCRIPTION
For 71‑E84 XL
hArDwAre
•Covers
OEM and most
aftermarket OEM‑
style coils in highly
visible stock locations
•Mounts with OEM hardware
•Includes cover for the top and back side
of coil on XL model
Coil
CoVer
•Smooth stamped steel construction
•Sold each
PART #
DS‑373680
PART #
140403
140403S
2102‑0264
SUG. RETAIL
$22.95
PART #
2102‑0065
DESCRIPTION
For 83‑85 XL
SUG. RETAIL
$24.95
generAl
587
ironhead xl
seAts &
sissY bArs
hi-4n MUlTi-FUnCTion PerForManCe
iGniTion KiT WiTh SinGle-Fire Coil
•HI-4N ignition module features a one-piece machined aluminum
housing that reduces vibration and improves heat dissipation and reliability
•Improved kickstart algorithm design – starts as easily as with points
•BCD switches with solid detent and legible markings allow easy and repeatable
adjustments of mode, advance rate and rev limit
eXhAust
•Single-fire and dual-fire function built into a single module
•Flexible wiring harness makes installation easier
•Initial timing marks allow precise adjustment and re-installation
•Sensor cover integrated into the housing to provide protection during installation
CArburetors •Kit also includes Crane Cams single-fire coil and Crane Cams 8.5mm
& Air filters double silicone premium quality spark plug wires
PART #
2101‑0266
DESCRIPTION
For 71-85 XL
SUG. RETAIL
$483.95
2101-0266
PART #
2101‑0025
DESCRIPTION
Ignition rotor; repl. OEM #32402-83
SUG. RETAIL
$8.45
engine
DSK61
DSK62
iGniTion and Coil KiTS
trAnsmission •Complete 10V electronic ignition systems built with
the latest state-of-the-art engineering
& DriVeline
•The same ignition used by top drag and road racers
to set records and bring home victories over the
past decade
gAskets
•The Dyna S is completely housed behind the
& seAls
ignition cover and uses a magnetic rotor with the
original advance unit, so the factory advance curve
is maintained
•Coils provide spark voltages in excess of 30,000V and
eleCtriCAl
spark energies second to none
& lighting
•The DSK61 Dyna S and coil system includes a DC7-1 high energy coil
•The DSK62 Dyna S and coil system is designed for single-fire
applications; includes two DC10-1 Dyna coils
hAnDlebArs,
NOTE: Later models will require the use of a mechanical advance unit.
Controls &
mirrors
iGniTion KiTS
CAbles
brAkes
oil tAnks,
filters &
gAs tAnks
DAshes
& gAuges
PART #
DESCRIPTION
DSK61
DSK62
Dual-fire ignition kit
Single-fire ignition kit
•Kit includes 12V ignition system, 8.5mm spark plug
wires, single-fire coil and instructions
•Ignition system has two advance curve families with adjustable advance
curves to accommodate stock to wild engine modifications
•Four rotary switches for adjusting timing and single/dual fire rpm limit
•Digitally set rpm limit (in 100 rpm steps), selectable single- or
dual-fire mode
•Selectable multi-spark mode for quick starting and smooth cruising
•Coil outputs protected against short circuits
•Optional USB interface kit and software (programs available
on Daytona Twin Tec web site) available for programming
custom curves
•Requires the use of an OEM timing rotor (OEM #32402-83 or
PART #2101-0234)
•Uses the tachometer wire for the USB interface and comes with
a connector
PART #
SUG. RETAIL
FOR 71‑85 XL
$194.95
284.95
2101-0212
DESCRIPTION
SUG. RETAIL
FOR 71‑85 XL
2101‑0212
A.R.B. approved ignition kit (ARB E.O. No. D-641-1)
Standard ignition kit (Mode switch position 9 can be used to set kickstart, single-fire race advance curves without
use of the USB interface. Not legal for sale or use on pollution-controlled vehicles)
Timing rotor; repl. OEM #32402-83 (includes mounting screw and washer)
USB interface kit
ChAssis,
2101‑0242
suspension,
fenDers
2101‑0234
& wheels
2101‑0075
$399.95
399.95
6.95
84.90
floorboArDs
& pegs
eliTe 1 iGniTion ModUle
hArDwAre
generAl
588
•All electronics mounted in the nose cone (timing cover)
•Feature selectable advance curves (eight advance curves
in either dual- or single-fire operation)
•Adjustable rpm limiter (eight rpm limits)
•Dual-range VOES operation
•Accu-Ray light for easy installation and check system
•Must use tach adapter PART #DS-242332 with single-fire systems
PART #
DESCRIPTION
DS-242332
DS-242319
SUG.
RETAIL
PART #
DESCRIPTION
SUG.
RETAIL
FOR 71‑85 XL (CONT)
FOR 71‑85 XL
DS‑242319 For stock or slightly modified engines (works w/ VOES)
DS‑242371 For stock or slightly modified engines w/ kick starter
(works w/ VOES)
$269.95
DS‑242339 For race motors w/ NOS systems and turbos (w/o VOES)
$269.95
TACH ADAPTER
269.95
DS‑242332 Tachometer adapter for single-fire Compu-Fire ignitions
33.95
ironhead xl
seAts &
sissY bArs
inTernal 12V iGniTion SYSTeM
•Features two advance curve families that are adjustable to
accommodate stock and modified engines
2101-0130
•Selectable multi-spark mode for quick starting and smooth cruising
•Four rotary switches for timing adjustments, single/dual ignition
mode and rpm limit (100-rpm steps)
•Coil outputs protected against short circuits
•Requires coils with a minimum of 3 ohms resistance and low
resistance spiral-core-type plug wires
•Requires timing rotor OEM #32402-83
2101-0208
or PART #2101-0234
PART #
DESCRIPTION
•Uses the tachometer wire for the PC link and
FOR 71‑85 XL
comes with a connector
2101‑0208 California A.R.B. approved internal ignition system
2101‑0241 Standard internal ignition system (mode switch position 9 can be used to set
NOTE: Standard internal ignition system
is not legal for sale or use on
pollution-controlled vehicles.
2101‑0130
2101‑0234
2101‑0075
NOTE: California A.R.B. E.O. No. D-641-1.
kickstart, single-fire race advance curves without using the USB interface)
12V power supply (110/240 VAC multi-plug international compatibility)
Timing rotor; repl. OEM #32402-83 (includes mounting screw and washer)
USB interface kit
eXhAust
CArburetors
& Air filters
SUG. RETAIL
$291.95
291.95
76.95
6.95
84.90
engine
trAnsmission
& DriVeline
SinGle-Fire 12V eleCTroniC
iGniTion SYSTeM
•All the features of the famous Dyna “S”, plus the special feature of firing the front and rear cylinders
independent of each other, allowing a much more accurate timing of each cylinder
•The stock ignition system fires both cylinders at the same time, which works fine for the front cylinder,
but the rear receives the “wasted” spark when the cylinder has started its intake stroke; this can result
in harder starting, increased engine vibration, backfire and raw fuel being spit back into the carb, all
creating a power loss
•Dyno and top-speed testing have shown a dramatic improvement in power in all areas; bikes with
hotter cams show the greatest improvement
•If you truly want to get the most out of your stock, slightly modified or all-out customized
Harley-Davidson, you need a Dyna “S” single-fire ignition system
NOTE: Not recommended for use with OEM coils.
NOTE: On 80-up XL models, an advance weight mechanism is required.
NOTE: This unit must be used with special Dyna coils; see coil applications.
NOTE: Tach adapter is required when using an electric tach.
PART #
DS6‑2
DESCRIPTION
For 71-85 XL using a mechanical advance assembly
gAskets
& seAls
eleCtriCAl
& lighting
hAnDlebArs,
Controls &
mirrors
SUG. RETAIL
$151.95
CAbles
12V dUal-Fire eleCTroniC iGniTion SYSTeM
•Perfect ignition timing once and for all
•Self-contained ignition system features Hall Effect magnetic sensors, which are not sensitive
to rpm changes or affected by dirt and oil
•Improves overall performance by changing timing less than 3 degrees, extends plug life,
eliminates the use of points and condensers; can be easily installed
•Used and endorsed by many championship racers
PART #
DESCRIPTION
SUG. RETAIL
•Requires the use of a mechanical advance unit
NOTE: Not recommended for use with OEM coils.
DS6‑1
For 71-85 XL
brAkes
oil tAnks,
filters &
gAs tAnks
$127.95
DAshes
& gAuges
VT-i V-TWin eleCTroniC iGniTion SYSTeM
•Ultra-reliable dual fire electronic ignition system
•Includes special trigger rotor for use with traditional mechanical advance mechanism (sold separately)
•Precise digitally set rpm limiter (200 rpm steps from 5,200 to 7,000 rpm)
•Status LED for easy static timing
•Electronic dwell control for maximum ignition energy at high rpm and reduced current draw at low rpm
•Compatible with most original equipment and aftermarket dual fire ignition coils (3-5 ohms primary resistance)
•Easy installation – simple two-wire hookup to coil
•Hall effect sensor detects teeth on special trigger rotor and provides very stable spark timing
•Operates down to below 6 volts for reliable starting under all conditions, including kick start
•Fully encapsulated construction using surface mount electronics –
PART #
DESCRIPTION
waterproof and highly resistant to vibration and shock
2101‑0267
For 71-85 XL
•Over-temperature protection; rated to operate at 125°C (260°F)
ChAssis,
suspension,
fenDers
& wheels
floorboArDs
& pegs
SUG. RETAIL
$142.95
hArDwAre
SinGle- or dUal-Fire iGniTion ModUle
•For use in single- or dual-fire applications with proper coil
•Features adjustable rev limiter and 15% advance curves
•Uses stock rotor cup OEM #32402-83 or PART #2101-0234
PART #
•Requires graphite plug wires and resistor spark plugs
7805‑1040
generAl
DESCRIPTION
For 71-85 XL
SUG. RETAIL
$379.95
589
ironhead xl
seAts &
sissY bArs
iGniTion BooSTer
ModUle
•Boost ignition power in points‑
equipped motorcycle
•Improves performance by
transferring inconsistent electrical
surges into precisely controlled
bursts of energy to the coil for more
thorough and efficient combustion
•No more burned points; current reduced to 0.1 amp
•Unaffected by dirt, moisture, oil or vibration
•Ultra fast spark voltage rise time; 50% faster than points
•Extends spark plug life
eXhAust
CArburetors
& Air filters
engine
trAnsmission
& DriVeline
iGniTion
SenSor
aSSeMBlY
•Includes a pickup,
mounting plate and wires
with connectors
PART #
0807‑3017
PART#
2101‑0323
DESCRIPTION
For 80‑85 XL; repl. OEM #32400‑80A
SUG. RETAIL
$89.95
SUG. RETAIL
$39.95
hiGh-PerForManCe
iGniTion adVanCe UniT
gAskets
& seAls
eleCtriCAl
& lighting
DESCRIPTION
Single points ignition
•Advance mechanism is smoother, more
accurate and more reliable than any OEM unit
•Stainless steel shaft, plate and washers
•Heat‑treated advance weights coated with
high‑tech, low‑friction polymers
•Hardened‑steel pins hold the weights in place, which are in turn
spring loaded, using high‑quality phosphate‑coated spring wire
•Springs wound to exacting specifications, and cadmium‑plated to
resist corrosion
iGniTion
SenSor aSSeMBlieS
•Assemblies include pickup, mounting
hAnDlebArs, plate and wires with connectors
DESCRIPTION
Controls & PART #
0807‑0116
For 80‑85 XL; repl. OEM # 32400‑80A
mirrors
SUG. RETAIL
$44.95
PART #
2105‑0051
DESCRIPTION
For 71‑85 XL that utilize a mechanical advance
SUG. RETAIL
$57.95
CAbles
adVanCe UniT aSSeMBlY
brAkes
•Includes all the items shown; breaker plate
assembly and the advance unit with bolt can
be purchased separately
SUG.
PART #
oil tAnks,
filters &
gAs tAnks
DAshes
& gAuges
DESCRIPTION
RETAIL
FOR 71‑85 XL (EXCEPT SINGLE FIRE IGNITION)
DS‑242299 Advance unit
assembly, complete
DS‑242298 Advance unit and bolt only
DS‑242301 Breaker plate assembly
w/ points, condenser;
repl OEM #32577‑70
DS‑242299
$42.95
36.95
hArDwAre
DS‑242026
DS‑242027
DESCRIPTION
For 71‑85 XL
DS‑242028
SUG.
RETAIL
$1.95
DS‑242410
•Contact sets feature a metal spring designed to resist metal fatigue and a follower of space‑age material to ensure longer life
•Condenser is sealed to help prevent breakdown due to moisture
•Meets or exceeds OEM specs
•Sold in kits or as individual components
DESCRIPTION
SUG. RETAIL
PART #
DESCRIPTION
SUG. RETAIL
INDIVIDUAL COMPONENTS (CONT)
KITS
DS‑242026 For 71‑E78 XL
DS‑242027 For 57‑70 XL
DS‑242028 For 58‑69 XL w/ magneto
$13.95
12.95
18.95
INDIVIDUAL COMPONENTS
590
PART #
DS‑196035
PoinTS and CondenSerS
PART #
generAl
•Replacement advance unit
timing bolt
DS‑242407
ChAssis,
suspension,
fenDers
& wheels
floorboArDs
& pegs
10.95
rePlaCeMenT
TiMinG BolT
DS‑242407 Points for 71‑E78 XL; repl. OEM #32661‑70
7.95
DS‑242406
DS‑242408
DS‑242410
DS‑242409
Points for 57‑70 XL; repl. OEM #30605‑48
Points for 58‑69 XLCH (magneto); repl. OEM #29533‑55A
Condenser for 57‑E78 XL; repl. OEM #32726‑30A
Condenser for 58‑69 XLCH (magneto);
repl. OEM #29534‑55A
$6.95
12.95
3.95
7.95
ironhead xl
seAts &
sissY bArs
2105‑0059
2105‑0058
PART #
TUne-UP KiTS
engine
DESCRIPTION
DS‑242403
DS‑242404
DS‑242405
DESCRIPTION
For 71‑E78 XL
For 57‑70 XL
For 58‑69 XL w/ magneto
SUG. RETAIL
SUG. RETAIL
$13.95
12.95
18.95
Points and condenser kit
Points only; repl. OEM #32661‑70
Condenser only; repl. OEM #32726‑30A
$21.95
15.95
7.95
•Made from 17‑4 stainless steel
•Strongest screws on the market today
•The body is .700” long
•Sold in pairs
eleCtriCAl
& lighting
DESCRIPTION
For 80‑85 XL; repl. OEM #32601‑80, 32601‑78
SUG. RETAIL
$17.95
iGniTion CoVer
TiMer STUd KiTS
iGniTion CirCUiT
BreaKer STUdS
•Replacement studs with screws and washers
•Sold in a 10 pack
DESCRIPTION
Ignition circuit breaker studs for 80‑85 XL;
repl. OEM #s 32601‑80, 32606‑82
SUG. RETAIL
$1.45 (ea.)
CirCUiT
BreaKer PoST
reBUild KiT
•Reproduction of original
ignition timer cover studs
•Zinc‑plated
•Sold in pairs
PART #
2401‑0463
2401‑0464
CAbles
DESCRIPTION
For 70‑79 XL; repl. OEM #32601‑78
For 80‑85 XL; repl. OEM #s 32606‑82 and 32601‑80
SUG. RETAIL
$12.95
12.95
SUG. RETAIL
$10.95
PART #
2401‑0540
DAshes
& gAuges
DESCRIPTION
For 57‑64 XL; repl. OEM #s 32593‑47, 1062 and 774
SUG. RETAIL
$10.95
eleCTroniC
iGniTion
diSTriBUTor
ChAssis,
suspension,
fenDers
& wheels
floorboArDs
& pegs
•Lightweight billet
•12V unilite ignition with
fully adjustable advance allows
faster and easier starting
•Feature advance curves, rev‑limiting and
high‑spark output
•Can be set to run either in a single‑or dual‑fire mode
•No head removal when using stock heads
•Requires graphite plug wires and resistor spark plugs
PART #
2130‑0020
brAkes
oil tAnks,
filters &
gAs tAnks
•Cadmium‑plated
•Works on all battery models
DESCRIPTION
For 57‑69 XL
hAnDlebArs,
Controls &
mirrors
2401‑0464
CirCUiT
BreaKer
adJUSTinG
SCreW KiT
•Reproduction of brass circuit
breaker post
•Kit includes one post and
one installation tool
trAnsmission
& DriVeline
gAskets
& seAls
STainleSS STeel
SenSor PlaTe SCreWS
PART #
DS242294
PART #
2401‑0460
DS‑242403
FOR 71‑E78 XL
•Contact sets include a metal
spring to reduce metal fatigue
and long‑life follower
•Sealed condenser helps prevent
water damage
•Meets or exceeds OEM specs
PART #
2105‑0058
2105‑0059
2105‑0060
CArburetors
& Air filters
•Heavy‑duty construction
•Superior to OEM points
and condenser
•Oversized ventilated contacts
and copper shunts
•Available as a kit or as
individual components
2105‑0060
PART #
2130‑0047
eXhAust
BlUe STreaK™
hiGh-PerForManCe
PoinTS and
CondenSer
DESCRIPTION
For 57‑70 XL
eleCTroniC
iGniTion diSTriBUTor
hArDwAre
•Lightweight billet
•12V dual‑fire unilite ignition with
fully adjustable advance allows
faster and easier starting
•No head removal when using
stock heads
SUG. RETAIL
$529.95
PART #
DS‑243087
DESCRIPTION
For 57‑70 XL
generAl
SUG. RETAIL
$429.95
591
ironhead xl
seAts &
sissY bArs
eXhAust
hiGh TorQUe STarTerS
•Starters feature 15% more power and torque than OEM units
•Manufactured using heavy-duty armature commutators, large
drive-end bearings and needle bearings in the com-end caps
PART #
DESCRIPTION
2110-0223
SUG. RETAIL
FOR 67‑80 XL EQUIPPED WITH PRESTOLITE STARTERS
(6” LONG); REPL. OEM #31458‑66
CArburetors 2110‑0224
& Air filters 2110‑0223
2110-0226
PART #
DESCRIPTION
SUG. RETAIL
FOR 74‑E76 XLH EQUIPPED WITH HITACHI STARTERS
(51/4” LONG); REPL. OEM #31570‑73
Chrome
Black
$179.95
159.95
2110‑0226
2110‑0225
Chrome
Black
$179.95
159.95
engine
trAnsmission
& DriVeline
gAskets
& seAls
80-1006
80-1005
hiGh-PerForManCe
STarTer MoTorS
•100% new – not remanufactured!
•Special pinion shaft threads and extended
jackshaft bolt allow for a wider range of applications
eleCtriCAl •Starters feature oversize clutch rollers, cold headed steel idler gears
& lighting
and armature hairpins that are resistance-fused to the armature
•1.4kW is a new replacement unit for stock and slightly modified engines;
generates more power than the OEM stock starter
hAnDlebArs, •Available in black or chrome finish
Controls &
mirrors
NOTE: OEM Hitachi starters measure 51/4”. OEM Prestolite starters measure 6”.
DESCRIPTION
SUG. RETAIL
FOR 74‑E76 XLH
80‑10051
80‑10061
80‑10071
80‑10081
PART #
DESCRIPTION
SUG. RETAIL
FOR 81‑85 XL
1.4kW Hitachi black
1.4kW Hitachi chrome
$246.95
317.95
FOR 67‑80 XL
brAkes
80-1009
NOTE: For optimum performance, use with Drag Specialties battery and battery cables.
PART #
CAbles
80-1010
80‑1009
80‑1010
1
1.4kW Prestolite black
1.4kW Prestolite chrome
246.95
317.95
1.4kW black
1.4kW chrome
$297.95
406.95
Starter motor design is more compact than the original and does not
require the rear bracket. Because of the higher output, 4-gauge cables
are recommended for this starter.
Black
Wrinkle
oil tAnks,
filters &
gAs tAnks
STarTer
MoTorS
DAshes
& gAuges
ChAssis,
suspension,
fenDers
& wheels
floorboArDs
& pegs
hArDwAre
generAl
592
Gen iii STarTer MoTor
•The American-made and -designed
Compu-Fire starter is so good, it’s patented
•Powerhouse turns over a full 2kW, while only
drawing 175A, and yet is encased in a short
compact package
•Features an extended jackshaft bolt,
removable jackshaft coupler, ultra-powerful
Neodymium magnets, an innovative hightorque clutch and a 6:1 planetary gear
reduction that is sure to start your hardcranking steed
•Starter body is polished with chrome
end caps
PART #
2110‑0059
DESCRIPTION
For 81-85 XL
SUG. RETAIL
$579.95
•Nippondenso starters
are assembled in the
U.S.A. with heavy-duty
components and tested
with state-of-the-art equipment
•Solenoid plunger, return damper
and springs are replaced with stronger components
Polished
•Clutch shaft and rollers are replaced with precision-ground
Chrome
and hardened parts for longer service life
•All components are assembled with a special lube that
has been formulated for starter roller clutch applications
•CNC-machined billet mounting noses are held together with aerospace fasteners
•After assembly, all starters go to a dyno test including hi-low voltage, stall torque, solenoid
engagement, amperage draw, load test, maximum rpm and motor impulse wave form
•Starters have a 4.4:1 gear reduction and produce 46% more cranking torque than
the stock starter
•Starters available in two kilowatt ratings (1.2 and 1.4)
•The 1.4 kW starter is designed for up to 100” motors; use Terry battery cables and a battery
with 300+ cranking amps like the Drag Specialties battery for best results
•Choose from two finishes: black wrinkle or polished/chrome
PART #
DESCRIPTION
SUG. RETAIL
1.2 kW FOR 81‑85 XL
DS‑196178
DS‑196177
Black wrinkle
Polished/chrome
PART #
DESCRIPTION
SUG. RETAIL
1.4 kW FOR 81‑85 XL
$349.95
349.95
DS‑196183
DS‑196182
Black wrinkle
Polished/chrome w/
raw finish starter nose
$349.95
349.95
ironhead xl
seAts &
sissY bArs
BaBY STarTer
•Permanent Magnet Gear Reduction (PMGR) Prestolite-style starter
•Mates to OEM starter gear case and output shaft
•Produces 2kW of cranking energy by using a modern permanent
magnet field
•Lower planetary gear reduction ratio of 6:1
•Standard machined finish with chrome end caps
PART #
2110‑0364
eXhAust
DESCRIPTION
For 67-80 XL w/ Prestolite starters
SUG. RETAIL
$369.95
CArburetors
& Air filters
engine
DS-194144
DS-194148
DS-195143
trAnsmission
& DriVeline
DS-195142
gAskets
& seAls
rePlaCeMenT CoMPonenTS
For hiTaChi STarTerS
eleCtriCAl
& lighting
NOTE: For OEM equivalent starters. Will not fit high-torque starters.
PART #
DS‑194148
DS‑194144
DESCRIPTION
For 74-E76 XLH models equipped
w/ Hitachi starters; repl. OEM #31580-73
Starter brush set for Hitachi style
SUG. RETAIL
$129.95
15.95
rePlaCeMenT CoMPonenTS
For PreSToliTe STarTerS
hAnDlebArs,
Controls &
mirrors
•Replacement brushes and armature available; all parts are
interchangeable with OEM
NOTE: For OEM equivalent starters. Will not fit high-torque starters.
PART #
STarTer Gear
enGaGeMenT leVer
DS‑195143
DS‑195142
•Replaces OEM-style
engagement lever
PART #
DS‑242097
DESCRIPTION
For 67-80 XL, XLH; repl. OEM #31424-67
SUG. RETAIL
Armature; repl. OEM #31542-66 (ea.)
Brushes; repl. OEM #31541-66 (set)
•Replacement brushes
for early and late
model starters
DESCRIPTION
For 67-80 XL; repl. OEM #31424-67
SUG. RETAIL
$26.95
PART #
DS‑195147
DS‑194144
DS‑195142
DAshes
& gAuges
DESCRIPTION
For 81-85 XL; repl. OEM #31596-85 (set)
For 74-E76 XL; repl. OEM #31582-73 (set) Hitachi
For 67-80 XL; repl. OEM #31541-66 (set) Prestolite
SUG. RETAIL
$17.95
ChAssis,
15.95
17.95 suspension,
fenDers
& wheels
STarTer end
BearinG
•High-quality OEM
replacement component
•Sold each
PART #
2110‑0451
brAkes
oil tAnks,
filters &
gAs tAnks
STarTer
BrUSheS
•Sold each
CAbles
$119.95
17.95
DS-195147
SUG. RETAIL
$8.95
STarTer
Gear
enGaGeMenT
leVer
PART #
2110‑0361
DESCRIPTION
FOR 67‑80 XL EQUIPPED WITH PRESTOLITE STARTERS
floorboArDs
& pegs
STarTer ShaFT hoUSinG BearinG
•Needle bearing fits starter housings as listed below
DESCRIPTION
For 67-80 XL; repl. OEM# 31539-66
SUG. RETAIL
$12.95
PART #
BAM‑810
DESCRIPTION
For 67-80 XL; repl. OEM #9062
SUG. RETAIL
$13.95
hArDwAre
STarTer
driVe
STarTer
driVe
•Heavy-duty, five-roller clutch
•Weatherproof
•Sold each
•Heavy-duty, weatherproof,
five-roller clutch
•Sold each
PART #
DESCRIPTION
SUG. RETAIL
2110‑0369 For 67-80 XL; repl. OEM #
31443-65A
$35.95
PART #
DESCRIPTION
DS‑242117 For 67-80 XL;
repl. OEM #31443-65A
generAl
SUG. RETAIL
$31.95
593
ironhead xl
seAts &
sissY bArs
eXhAust
CArburetors
& Air filters
STarTer
driVe ClUTCh
engine
•Comes complete with bearing and
drive clutch
•Direct OEM replacement
•Sold each
trAnsmission
PART #
& DriVeline
DESCRIPTION
2110‑0010 For 81‑85 XL;
repl. OEM #31567‑81
heaVY-dUTY STarTer
driVe ClUTCh
SUG. RETAIL
$100.95
gAskets
& seAls
eleCtriCAl
& lighting
brAkes
oil tAnks,
filters &
gAs tAnks
•Includes bearing and drive clutch
•Sold each
•Comes complete with bearing and
drive clutch
PART #
2110‑0240
DESCRIPTION
For 67‑80 XL
SUG. RETAIL
$79.95
PART #
DESCRIPTION
2110‑0367 For 81‑85 XL;
repl. OEM # 31567‑81
SUG. RETAIL
$109.95
2110‑0449
STarTer
ShaFT oUTer
ThrUST WaSherS
2110‑0235
•Sold in pairs
hAnDlebArs,
Controls &
mirrors
CAbles
STarTer driVe ClUTCh
PART #
1132‑0092
2110‑0317
DESCRIPTION
For 67‑80 XL; repl. OEM #31502‑65
SUG. RETAIL
$9.95
2110‑0450
STarTer ShaFT
CoMPonenTS
•High‑quality
replacement components
•Sold individually
unless noted
PART #
2110‑0235
2110‑0317
2110‑0449
2110‑0450
DAshes
& gAuges
DESCRIPTION
Starter shaft shifter collar for 67‑80 XL;
repl. OEM #31503‑65
Starter shaft nut for 67‑80 XL; repl. OEM #31493‑67
Starter shaft spacer for 67‑80 XL;
repl. OEM #31490‑67
Bronze starter shaft inner thrust washer for
67‑80 XL; repl. OEM #31501‑65 (5‑pk.)
SUG.
RETAIL
$28.95
12.95
28.95
•Replacement 62‑tooth
weld‑on style
•61/2” i.d.
•Sold each
PART #
1112‑0038
DESCRIPTION
For 67‑79 XL; repl. OEM #33162‑67
SUG. RETAIL
$47.95
4.95
ChAssis,
suspension,
fenDers
& wheels
STarTer end CoVer
STarTer ThrU BolTS
•Chromed, die‑cast starter end
cover adds a finishing touch
•Smooth finish
floorboArDs •Fit Hitachi starters only
•67/16” long
& pegs
•Sold in pairs
PART #
2110‑0452
STarTer
rinG Gear
DESCRIPTION
For 74‑E76 XL; repl. OEM #31576‑73
SUG. RETAIL
$10.95
PART #
DS‑325517
DESCRIPTION
For 67‑80 XL
SUG. RETAIL
$13.95
hArDwAre
rUBBer
Solenoid
BooT
Solenoid
end CoVer
generAl
594
•Die‑cast cover with a chrome finish
•Fits over the solenoid starter boot
(PART #DS‑373608)
•Molded black rubber boot
for starter solenoids
•It is recommended you replace the OEM boot
when installing a new solenoid end cover
U.S. Des. Patent #283,210.
PART #
DS‑373609
DESCRIPTION
For 67‑80 XL
SUG. RETAIL
$21.95
PART #
DS‑373608
DESCRIPTION
For 67‑80 XL; repl. OEM #31444‑65A
SUG. RETAIL
$5.95
ironhead xl
STarTer Solenoid
hiGh-PerForManCe
STarTer Solenoid
•Features zinc-finished moisture-proof
case, hardened steel plunger and
long-life contact disc
•Made in the USA
•Designed with extra current capacity
for starting high-compression motors
•Recommended for use with Drag Specialties
High-Performance Starters
•Features zinc-plated case
•Copper terminals and hardened plunger
•Sealed cover for long life
PART #
2110‑0327
seAts &
sissY bArs
DESCRIPTION
For 67-80 XL; repl. OEM #71469-65
PART #
2110‑0368
eXhAust
DESCRIPTION
For 67-80 XL; OEM # 71469-65
SUG. RETAIL
$45.95
CArburetors
& Air filters
40111C
SUG. RETAIL
$42.95
engine
40112
STarTer SolenoidS
and rePair KiT
STarTer Solenoid
•Features zinc-finished moisture-proof
case, hardened steel plunger and
long-life contact disc
PART #
DS‑242116
trAnsmission
& DriVeline
•Features permanently sealed moisture-proof
cases, heavy-duty, multi-weld brackets, hardened steel plungers
with long-life contact discs and high-strength end caps
•Available zinc- or chrome-plated
DESCRIPTION
For 67-80 XL; repl. OEM #71469-65
SUG. RETAIL
$42.95
PART #
DESCRIPTION
gAskets
& seAls
SUG. RETAIL
FOR 67‑80 XL; REPL. OEM #71469‑65
40111
40111C
2110‑0425
Zinc finish solenoid
Chrome solenoid
Black solenoid
$54.95
79.95
59.95
SOLENOID REPAIR KIT
40112
STarTer
relaY SWiTCheS
•Easily handles highcurrent draw
PART #
2110‑0372
2110‑0371
2110-0372
DESCRIPTION
For 80-85 XL; OEM # 31506-79B
For 75-79 XL; repl. OEM #71463-73
SUG. RETAIL
$15.95
25.95
2110-0382
2110-0383
DESCRIPTION
Chrome
Wrinkle black
STarTer relaY SWiTCheS
•Designed to handle high-current draw
with ease
brAkes
DESCRIPTION
For 80-85 XL; repl. OEM #31506-79B
For 75-79 XL; repl. OEM #71463-73
SUG. RETAIL
$14.95
25.95
PART #
DS‑325651
ChAssis,
suspension,
fenDers
& wheels
DESCRIPTION
For 75-79 XL; repl. OEM #71463-73
SUG. RETAIL
$32.95
DS272095
•Used for starter relay
and other relays on later model bikes
•Available with black wires or colored wires
(red, green, blue, yellow and orange)
PART #
2110‑0455
PART #
floorboArDs
& pegs
hArDwAre
relaY SoCKeT
aSSeMBlieS
•High-quality OEM
replacement component
•Includes a black cover
oil tAnks,
filters &
gAs tAnks
DAshes
& gAuges
•Features a copper-plated bracket
for improved ground connection
•Impact-resistant, high-dielectric
strength case
•Magnetic circuit with increased
strength for better starting in weak
battery conditions
SUG. RETAIL
$79.95
79.95
STarTer relaY
hAnDlebArs,
Controls &
mirrors
CAbles
BlUe STreaK®
STarTer
relaY SWiTCh
•Beautiful T-6 billet aluminum
replaces the OEM end cover
•Can be used as primary or auxiliary starter button
•Available in triple-plated show chrome or wrinkle black
powdercoat finish
•Install in just minutes with OEM hardware
•For use with 81-85 OEM starters and Terry Components 1.2kw or
1.4kw starters
PART #
2110‑0382
2110‑0383
28.95
DS-325702
2110-0371
PART #
DS‑325702
DS‑325494
Solenoid
end CoVer/
STarTer BUTTonS
Cap, mounting lugs, plunger, spring
and assembly screws
eleCtriCAl
& lighting
DESCRIPTION
DS272096
SUG. RETAIL
generAl
FOR 57‑85 XL
DESCRIPTION
For 67-74 XL; repl. OEM #71455-67
SUG. RETAIL
$23.95
DS272095
DS272096
Black four-wire relay socket
Colored five-wire relay socket
$9.95
5.95
595
IRONHEAD XL
2111-0177
SEATS &
SISSY BARS
DS-195105
VARIABLE AMPERAGE
GENERATORS WITH
BUILT-IN REGULATOR
DS-195110
•Feature the unique concept of a built-in
regulator and a simple two-wire hookup
•Regulators have variable amperage output, producing more amps when cold for faster charging
•All parts are interchangeable with OEM (except end cap/regulator)
•Available in black with a standard voltage or low voltage regulator (for bikes that are running
CARBURETORS a battery in a wraparound oil tank)
& AIR FILTERS •Made in the U.S.A.
EXHAUST
PART #
DESCRIPTION
SUG. RETAIL
FOR 57‑64 XL
ENGINE
TRANSMISSION
& DRIVELINE
2111‑0177
6V generator w/ standard regulator
$452.95
FOR 65‑84 XL
DS‑195110
DS‑313074
DS‑195111
DS‑313072
12V generator w/ standard regulator
12V generator w/ low volt regulator
Repl. standard regulator for #DS-195110 only
Repl. low voltage regulator for #DS-313074 only
441.95
447.95
161.95
161.95
AMERICAN-MADE GENERATORS
•High-quality construction and components;
manufactured by the same company that
supplies OEM
•Armature is balance wound, and the epoxybonded wires are fused to the commutator;
hard maple wire wedges secure the windings
•Available with black finish
SUG.
PART #
DS‑195105
2111‑0176
DESCRIPTION
For 65-81 XL; repl.
OEM #29975-65A; 12V; 10A
For 57-64 XL; repl.
OEM #29975-58A; 6V; 15A
RETAIL
$325.95
329.95
151301
GASKETS
& SEALS
DS-195102
GENERATOR COMPONENTS
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
•Top-quality Drag Specialties or Accel replacement
parts for Harley generators
•All components are interchangeable with
OEM parts and meet or exceed OEM specifications
•Sold individually, unless noted
DS-195101
PART #
THE “GREAT”
GENERATOR
•Replacement 10A, 12V generator
•Features a balanced armature, precision-ground,
heat-treated armature shaft, die-cast and
machined-aluminum end cover and end plate
•Brush end contains sealed roller bearing, while
the drive end has a shielded ball bearing
•Available in black or chrome versions
•All components are interchangeable
with OEM parts
SUG.
PART #
DESCRIPTION
RETAIL
FOR 65‑81 XL THAT USE OEM #29975‑65A
DS‑195101
DS‑195102
HARDWARE
DESCRIPTION
Black
Chrome
$239.95
269.95
DS‑195086 12V armature for 65-81 XL; repl. OEM #30851-65A
151301
12V armature for 65-81 XL; repl. OEM #30851-65A
MFG.
SUG.
RETAIL
Drag Specialties
Accel
$99.95
136.95
Drag Specialties
Accel
8.95
8.95
BRUSHES
DS‑195099 Brushes for 58-81 XL; repl. OEM #30426-58 (pr.)
192300
Brushes for 58-81 XL; repl. OEM #30426-58 (pr.)
2111‑0180 Terminal screw insulating washers for 58-81 XL;
repl. OEM #6186 (25-pk.)
Eastern MC Parts
.55 (ea.)
Drag Specialties
Drag Specialties
Eastern MC Parts
Eastern MC Parts
8.95
4.95
8.95
8.95
DRIVE GEARS/BEARINGS
DS‑195068
0924‑0111
2111‑0181
2111‑0182
Drive gear for 63-E84 XL; repl. OEM #31073-63A
Generator drive gear bearing for 58-81 XL; repl. OEM #9007
Commutator end bearing for 61-81 XL; repl. OEM #9064
End cover bearing for 58-81 XL; repl. OEM #9088
GENERATOR OVERHAUL KIT
192303
Generator overhaul kit for 58-81 XL 6V or 12V generators
GENERATOR
POST KIT
Accel
25.95
GENERATOR POLE
SHOE SCREW KIT
•Kit includes two Parkerized pole shoes with screws
DESCRIPTION
For 58-78 XL
SUG. RETAIL
$13.95
PART #
2401‑0606
DESCRIPTION
For 58-78 XL; Repl. OEM #30280-58
GENERATOR DRIVE
GEAR WASHERS
SUG. RETAIL
$13.95
GENERATOR RELAY
•6-volt design
•Includes a chrome cover
•Sold in 5-packs
PART #
2111‑0178
192303
0924-0111
ARMATURE
•Kit includes two screws;
OEM #2690W, two insulating bushings;
CHASSIS,
OEM #5911, two fiber washers; OEM #6186,
SUSPENSION, two lock washers; OEM #7220
PART #
and two nuts; OEM #7634
FENDERS
2401‑0605
& WHEELS
FLOORBOARDS
& PEGS
DS-195068
192300
DESCRIPTION
For 58-81 XL; repl. OEM #931067-63
SUG.
RETAIL
$2.95
PART #
2110‑0456
SUG.
DESCRIPTION
RETAIL
For 54-57 XL; repl.
OEM #74750-38
$56.95
GENERATOR
STRAP
GENERAL
•Black finish
•Sold each
PART #
2111‑0175
596
DESCRIPTION
For 58-81 XL;
repl. OEM #30475-66
SUG. RETAIL
$10.95
GENERATOR END COVER
GENERATOR COVER
PART #
DS‑325531
PART #
DS‑373586
•Features die-cast construction
with a smooth chrome finish
DESCRIPTION
For 57-81 XL
SUG. RETAIL
$12.95
•Chromed to add a custom
look to any generator
DESCRIPTION
For 57-81 XL
SUG. RETAIL
$17.95
IRONHEAD XL
SEATS &
SISSY BARS
EXHAUST
CARBURETORS
& AIR FILTERS
CYCLE ELECTRIC
STATOR
ALTERNATOR STATOR
•Meets or exceeds OEM specifications and
features precise construction
PART #
DESCRIPTION
SUG. RETAIL
UNCOATED
DS‑195093
For L84‑85 XL; repl. OEM #29967‑84A
$64.95
ENGINE
•Designed for 18A applications
PART #
2112‑0158
2112‑0825
DESCRIPTION
For L84‑85 XL; repl. OEM #29967‑84A
SUG. RETAIL
$103.95
TRANSMISSION
& DRIVELINE
2112‑0861
2112‑0812
GASKETS
& SEALS
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
2112‑0814
2112‑0823
SOLID-STATE REGULATORS
BRAKES
•High‑reliability voltage regulators feature rugged aluminum alloy construction and are available in Drag’s chrome finish
•All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become
maladjusted and are environmentally sealed for protection against moisture and shock
NOTE: 70-75 regulators do not have tach wires.
FITS MODEL
For L84‑85 XL
For 82‑E84 XL w/ generator
For 78‑81 XL, XLCH; 77‑78 XLCR
For 65‑77 XL
For 58‑64 XL
1 Regulators will work without a
CHROME
2112‑0815
2112‑08141
2112‑08131
2112‑08121
2112‑0862
battery.
SUG. RETAIL
$64.95
64.95
64.95
64.95
63.95
BLACK
2112‑0825
2112‑0824
2112‑0823
2112‑0822
2112‑0861
SUG. RETAIL
$55.95
53.95
53.95
53.95
53.95
OEM #
74523‑84A
74504‑82
74504‑78
All 12V
‑
AMPS
19
13
10
10
15
CHARGING TYPE
12V
12V
12V
12V
6V
LEAD LENGTH
51”
5”
5”
N/A
N/A
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
201121C
201121‑B
FLOORBOARDS
& PEGS
SOLID STATE REGULATORS
•High‑reliability voltage regulators feature rugged aluminum
alloy construction
•All provide accurately regulated voltage under all electrical loads,
have no relay contacts to wear or become maladjusted and are
environmentally sealed for protection against moisture and shock
HARDWARE
NOTE: 70-75 regulators do not have tach wires.
FITS MODEL
65‑77 XL
L84‑85 XL
82‑E84 XL w/ generator
78‑81 XL, XLCH; 77‑78 XLCR
PART #
201102‑B
201102C
SUG. RETAIL
$115.95
124.95
BLACK
201104‑B
201121‑B
201117‑B
201102‑B
PART #
201104‑B
201104C
CHROME
201104C
201121C
201117C
201102C
SUG. RETAIL
$108.95
114.95
OEM #
All 12V
74523‑84A
74504‑82
74504‑78
PART #
201117C
201121‑B
AMPERAGE
10
19
13
10
SUG. RETAIL
$125.95
110.95
PART #
201121C
LEAD LENGTH
N/A
51”
5”
5”
GENERAL
SUG. RETAIL
$129.95
597
IRONHEAD XL
DS‑325483
2112‑0837
DS‑325485
SEATS &
SISSY BARS
EXHAUST
CARBURETORS
& AIR FILTERS
GENERATOR-MOUNTED REGULATORS
2112‑0840
•Available for 12V applications in a black finish
•If you have purchased a Cycle Electric generator since 1984 it may
have the four‑hole end plate; updated end plates are available
separately if your current generator is not equipped with one (comes
complete with bearing and seal)
•Available in a standard or low output style (for use with small
batteries in wraparound oil tanks)
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
PART #
DS‑325483
DS‑313070
CYCLE ELECTRIC
RECTIFYING REGULATORS
DS‑325485
DESCRIPTION
For all XL 12V regular output generators
w/ updated end plate (4‑hole)
For all XL 12V low output generators
w/ updated end plate (4‑hole)
Updated end plate (4‑hole)
SUG. RETAIL
$166.95
166.95
33.95
•Control voltage on Harley‑Davidson alternators, unlike other rectifiers
or regulators that dump to ground and cause maximum stator
current and higher temperatures
•Cycle Electric rectifying regulators block current to control voltage;
this reduces stator current, resulting in low temperature and less
HANDLEBARS, drag on the motor, which means more efficient operation
CONTROLS & •Made in the U.S.A.
ELECTRICAL
& LIGHTING
MIRRORS
CABLES
PART #
DS‑313012
2112‑0836
2112‑0837
2112‑0838
BRAKES
2112‑0839
2112‑0840
2112‑0841
DESCRIPTION
For L84‑85 XL, 17.4A; repl. OEM #74523‑84A
For 58‑64 XL 6V regular output generators
w/ two brushes (replaces mechanical type)
For 65‑77 XL 12V regular output generators
w/ two brushes (replaces mechanical type)
For 65‑77 XL low output 12V small battery in
6V oil tank (replaces mechanical type)
For 77‑81 XL regular output generator;
repl. OEM#74504‑78
For 82‑E84 XL w/ 10A (65A) generator
For 82‑E84 XL w/ 13A (65B) generator
SUG. RETAIL
$139.95
12V REGULATOR
119.95
•Internal wire connections are
vibration resistant
•Fiber and Mylar® insulating pads
•Large diameter contact surfaces
119.95
PART #
2112‑0560
119.95
DESCRIPTION
For 67‑78 XLH; repl. OEM #74510‑64
SUG. RETAIL
$71.95
121.95
121.95
121.95
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
12V REGULATOR
VOLTAGE REGULATOR
MOUNTING KIT
•Vibration‑resistant internal wire
connections, fiber and Mylar®
insulating pads and large‑
diameter contact surfaces
•Kit includes three rubber insulators
with nuts and lock washers
CHASSIS,
SUSPENSION, PART #
2401‑0607
FENDERS
& WHEELS
DESCRIPTION
For 67‑77 XL
SUG. RETAIL
$7.95
PART #
DS‑325496
DESCRIPTION
For 67‑78 XLH; repl. OEM #74510‑64
201105C
FLOORBOARDS
& PEGS
HARDWARE
SUG. RETAIL
$63.95
201107C
6V AND 12V REGULATORS
•Feature a heavy‑duty, shock‑mounted steel base with vibration‑resistant
internal wire connections, fiber and Mylar® insulating pads
and large‑diameter contact surfaces
•Available in gloss black OEM‑style or chrome‑plated cover
NOTE: B battery; DF field; D armature; 61 horn condenser.
PART #
DESCRIPTION
SUG. RETAIL
CHROME
GENERAL
201105C
201107C
201106C
12V regulator for 67‑78 XLH; repl. OEM #74510‑64
12V regulator for 65‑66 XLH and 65‑77 XLCH; repl. OEM #74511‑65
6V regulator for 52‑64 K, XL and XLH; 63‑66 125cc, 165cc and 175cc; repl. OEM #74510‑47A, chrome
$129.95
109.95
109.95
BLACK
598
201107
12V regulator for 65‑66 XLH and 65‑77 XLCH; repl. OEM #74511‑65
109.95
IRONHEAD XL
2113-0007
2113-0008
DRAG SPECIALTIES
HIGH PERFORMANCE
BATTERIES
SEATS &
SISSY BARS
•Specifically designed for
high-performance engines that
need extra cranking power
•Superior engineering features
include a radial grid design for
maximum cranking amps
•High vibration resistance
•Spill-proof, pre-filled, pre-charged,
maintenance-free sealed design (unless noted)
•Feature brass spacers, stainless steel nuts, bolts and star washers
EXHAUST
2113-0011
2113-0079
NOTE: Should be charged once a month when not in service.
BATTERIES
PART #
2113-00071
2113-00081
2113-0011
1
CARBURETORS
& AIR FILTERS
ENGINE
REPLACEMENT HARDWARE (5-pk.)
DESCRIPTION
For 70-78 XLCH
For 67-78 XLH
For 79-85 XL
SUG. RETAIL
$41.95
111.95
116.95
PART #
2113-0079
2113-0080
2113-0082
DESCRIPTION
For PART #2113-0007
For PART #2113-0008
For PART #2113-0011
SUG. RETAIL
$1.20 (ea.)
1.20 (ea.)
2.40 (ea.)
TRANSMISSION
& DRIVELINE
Not spill-proof design. Acid not included.
CROSS REFERENCE CHART
DRAG SPECIALTIES
PART #
2113-0007
2113-0008
2113-0011
YUASA BATTERY
PART #
Y12N7-4A
YHD-12
YTX20H-BS
HARLEY-DAVIDSON
OEM #
66006-70
66007-84
65991-82B
COLD CRANKING
AMPS
310
LENGTH
55/16”
81/8”
67/8”
WIDTH
3”
51/4”
37/16”
HEIGHT
51/4”
61/2”
61/8”
TERMINAL CONFIGURATION
+
+
+
-
DRAG SPECIALTIES AGM MAINTENANCE-FREE
CABLES
BRAKES
DESCRIPTION
For 79-85 X2L
SUG. RETAIL
$94.95
CROSS REFERENCE CHART
DRAG SPECIALTIES
PART #
2113-0276
YUASA BATTERY
PART #
YTX20H-BS
HARLEY-DAVIDSON
OEM #
65991-82B
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
•Fillable batteries from Drag Specialties!
•Specifically designed for hard starting, high performance engines that
need extra cranking power
•Radial grid technology delivers higher cranking amps and superior performance
•Special-absorbed glass-mat battery eliminates water loss, permitting the battery
to be permanently sealed once it is filled with acid; Acid Pack included
•Superior vibration resistance and durability provides a long service life
•Each battery includes a quick-connect harness specifically designed for Drag
Specialties battery chargers
•Features new flush-mount terminal adapters that eliminate the need for spacers
ensuring a secure, vibration resistant and direct-path connection
PART #
2113-0276
GASKETS
& SEALS
COLD CRANKING
AMPS
310
LENGTH
67/8”
WIDTH
37/16”
HEIGHT
61/8”
+
-
2113-0215
2113-0216
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
FLOORBOARDS
& PEGS
DRAG SPECIALTIES CONVENTIONAL BATTERY KITS
•Drag Specialties Conventional batteries are built to the same exacting specifications and quality-control
standards as OEM batteries
•Rugged and provide more cranking power over standard batteries
•Lead calcium alloy reduces water loss and service by 66% compared to standard batteries
•Includes anti-sulfation chemical formulated to reduce sulfate crystal buildup on the battery plates
•Reduces self-discharge for longer time between charges
•Fiberglass separators improve acid flow
•Kit includes battery, pre-measured acid pack, red filler tube, hardware kit and clear vent tube
•Each battery kit includes a quick-disconnect harness specifically designed for Drag Specialties chargers
DESCRIPTION
For 70-78 XLCH
For 67-78 XLH
PART #
2113-0215
2113-0216
SUG. RETAIL
$37.95
94.95
YUASA REFERENCE #
YB7-A
YHD-12
HARLEY-DAVIDSON OEM #
66006-70
66007-84
HARDWARE
GENERAL
+
+
-
599
IRONHEAD XL
SEATS &
SISSY BARS
EXHAUST
Battery kit
CONVENTIONAL
BATTERY AND
BATTERY KIT
•High-quality, low-cost alternative
CARBURETORS to the OEM battery replacement
& AIR FILTERS •Meets or exceeds
OEM specifications
•Feature an impact- and
vibration-resistant polypropylene
case and cover
ENGINE
•Fiberglass separators improve
acid flow
•Battery Only includes battery,
hardware kit and clear vent tube
TRANSMISSION
•Battery Kit includes battery, pre& DRIVELINE
measured acid pack, red filler tube,
GASKETS
& SEALS
DESCRIPTION
For 70-78 XLCH
BATTERY ONLY PART #
R12N7‑4A
SUG. RETAIL
$34.95
BATTERY KIT PART #
2113‑0146
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
SUG. RETAIL
$35.95
YUASA REFERENCE #
Y12N7-4A
SUG. RETAIL
$35.95
84.95
‑
YUASA REFERENCE #
YB7-A
YHD-12
YB16-B
Battery kit
HEAVY-DUTY BATTERIES/BATTERY KITS
•Powerful starting power at a great price!
•Parts Unlimited Heavy-Duty batteries are built
to the same exacting specifications and quality-control
standards as OE
•Rugged and provide more cranking power over
standard batteries
•Lead calcium alloy reduces water loss and service
by 66% compared to standard batteries
•Include anti-sulfation chemical formulated to reduce
sulfate crystal buildup on the battery plates
•Reduce self-discharge for longer time between charges
•Fiberglass separators improve acid flow
•Battery Only includes battery, hardware and clear vent tube
•Battery Kit includes battery, pre-measured acid pack, red filler tube,
DESCRIPTION
For 70-78 XLCH
For 67-78 XLH
For 79-85 XL/XLH
1
BATTERY ONLY PART #
RCB7A1
RCHD4‑12
RCB16‑B
SUG. RETAIL
$34.95
83.95
65.95
BATTERY KIT PART #
2113‑0160
2113‑0151
‑
Supplied w/out vent tube.
FLOORBOARDS
& PEGS
HARDWARE
AGM MAINTENANCE-FREE BATTERY
GENERAL
600
•Parts Unlimited is proud to offer a premium-quality, maintenance-free battery
at a great low price
•Special absorbed-glass mat battery eliminates water loss, permitting the battery
to be permanently sealed once it is filled with acid
•Acid pack included
•Battery seals to prevent water loss
PART #
•Holds charge three times longer than conventional batteries
NOTE: Should be charged once a month when not in service.
2113‑0021
YUASA REF #
YTX20H-BS
DESCRIPTION
For 79-85 XL/XLH
SUG. RETAIL
$78.95
ironhead xl
seAts &
sissY bArs
YUaSa BaTTerieS
eXhAust
•The largest motorcycle battery manufacturer in the world
•Over 50 years of engineering expertise ensures high-quality construction for long
and trouble-free service
CArburetors
& Air filters
hiGh-PerForManCe aGM MainTenanCe-Free BaTTerieS
•This new generation of maintenance-free batteries delivers higher cranking amps
for vehicles that require extra starting power
•Additional cranking amps make these the most powerful batteries on the market
aGM MainTenanCe-Free
engine
•Special absorbed-glass mat battery eliminates water loss, permitting the battery
to be permanently sealed once it is filled with acid; Acid Pak included
•Truly the world’s finest “install it and forget it” motorcycle battery
ConVenTional
trAnsmission
& DriVeline
•Built to improve acid flow and resist vibration damage
•Impact resistant case and cover
•All batteries are shipped dry
YUMiCron
gAskets
& seAls
•The most powerful lead-acid battery of its size
•Appears as original equipment on more and more big bikes
YUMiCron Cx
eleCtriCAl
& lighting
•Lead/calcium battery has 5% to 8% more cranking power than the high-output Yumicron
•Requires minimal servicing
BATTERY APPLICATIONS CHART
DESCRIPTION
For 70-78 XLCH
For 67-78 XLH
For 79-85 XL/XLH
HIGH‑PERFORMANCE AGM MAINTENANCE‑FREE
‑
‑
YTX20H‑BS
AGM MAINTENANCE‑FREE
‑
‑
YTX‑20BS
CONVENTIONAL
Y12N7‑4A
YHD‑12
‑
YUMICRON
YB7‑A
‑
YB16‑B
YUMICRON CX
‑
‑
YB16‑B‑CX
hAnDlebArs,
Controls &
mirrors
SUG. RETAIL
$124.95
CAbles
PriCe liST
PART #
Y12N7‑4A
YB16‑B
SUG. RETAIL
$40.95
77.95
PART #
YB16‑B‑CX
YB7‑A
SUG. RETAIL
$99.95
40.95
PART #
YHD‑12
YTX‑20BS
SUG. RETAIL
$116.95
115.95
PART #
YTX20H‑BS
brAkes
oil tAnks,
filters &
gAs tAnks
PoWer Max MainTenanCe-Free BaTTerY
DAshes
& gAuges
•Completely sealed black case can be mounted in many positions
•Advanced technology allows very high power discharge
•Accepts a high rate of recharge without damage to the battery
•Can be recharged over 90% in less than one hour on a regulated charger
•Batteries MUST BE CHARGED in the same manner as any lead acid battery
•When not in service, batteries should be charged once a month
•PART #DS-325030 measure 67/8” L x 37/16” W x 61/8” H
PART #
DS‑325030
ChAssis,
suspension,
fenDers
& wheels
YUASA REF. #
YTX20-BS
DESCRIPTION
For 79-85 XL
SUG. RETAIL
$116.95
Black
Clear
floorboArDs
& pegs
hArDwAre
BaTTerY CaBle KiTS
•4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and superior flexibility
•Increase starter performance by supplying maximum battery current to the starter motor
•Contain all battery cables to replace OEM cables
•Available in translucent black and clear
PART #
DESCRIPTION
SUG. RETAIL
FOR 81‑85 XL – CABLE LENGTHS 11” AND 16”
79‑3010
Clear
PART #
DESCRIPTION
generAl
SUG. RETAIL
FOR 81‑85 XL – CABLE LENGTHS 11” AND 16” (cont)
$27.95
79‑3010‑1
Translucent black
$27.95
601
IRONHEAD XL
SEATS &
SISSY BARS
2113-0247
BATTERY CABLES
•Available in solid black and red or black with
red inflec with red ends
•4-gauge cable manufactured with pure
electrolytic-grade 36-gauge tinned copper strands for maximum current
transfer and superior flexibility
EXHAUST
•All manufactured with 1/4” and 5/16” cable
•Increase starter performance by providing maximum current to starter motor
•Sold each
•Chrome switch housing available separately
CARBURETORS •Made in U.S.A.
& AIR FILTERS
PART #
DESCRIPTION
SUG. RETAIL
POSITIVE
ENGINE
TRANSMISSION
& DRIVELINE
2113-0311
2113-0256
2113-0317
PART #
DESCRIPTION
SUG. RETAIL
NEGATIVE
2113-0247
2113-0248
2113-0249
2113-0250
2113-0251
2113-0308
2113-0309
2113-0310
2113-0311
2113-0312
8” Braided retro cable
8” Solid red cable
$18.95
21.95
23.95
24.95
25.95
17.95
18.95
19.95
21.95
22.95
2113-0252
2113-0253
2113-0254
2113-0255
2113-0256
2113-0313
2113-0314
2113-0315
2113-0316
2113-0317
8” Solid black cable
$18.95
21.95
23.95
24.95
25.95
17.95
18.95
19.95
21.95
22.95
GASKETS
& SEALS
“EXTREME” DUTY
BATTERY CABLES
ELECTRICAL BATTERY CABLE KIT
& LIGHTING •Manufactured from 4-gauge, 1,650-strand tinned
•Flexible #2 gauge, 2,000-strand
copper wire
•180A rating
•Black rubber-coated cables feature copper-coated tin lugs
with glued heat-shrink sleeves to prevent corrosion
copper wire with a super flexible silicone jacket
•Unique lug design (99.9% pure electrolytic
HANDLEBARS, copper) provides a positive connection with
greater conductivity and dependable service
CONTROLS &
•These cables will deliver more cranking power
MIRRORS
with less voltage drop than any cable
on the market today
•Available in black
CABLES
•Kit includes cables for required
stock applications
BRAKES
BLACK
DS-242144
DESCRIPTION
For 81-85 XL models
CABLE LENGTHS
11”/16”
PART #
7805-3024
DESCRIPTION
For 81-85 XL 11”/16”
SUG. RETAIL
$54.95
DS-317461
DS-317465
SUG. RETAIL
$42.95
DS-317463
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
BATTERY STRAPS
•High-quality replacement battery
straps are manufactured from
18-gauge stainless steel
•Meet or exceed OEM specifications
BATTERY TERMINAL KIT
•Add a look of authenticity with
these reproduced battery terminal
fasteners and felt washers
CHASSIS,
SUSPENSION, PART #
FENDERS
2401-0458
& WHEELS
DESCRIPTION
For 54-66 XL
SUG. RETAIL
$14.95
FLOORBOARDS
& PEGS
HARDWARE
GENERAL
602
PART #
DS-317465
DS-317463
DS-317468
DS-317461
2401-0489
BATTERY PAD
•1/8” low-density neoprene with
pressure sensitive, removable liner
on one side that exposes the adhesive for contact
•Pad is oversized so it can be trimmed into a top or bottom pad to fit
all applications
•Can be cut into irregular shapes for anti vibration padding, seat
bottoms, dash panels etc.
•Measures 5” x 8”
•Sold to dealer as 5-pk., retail is each
PART #
2113-0077
DESCRIPTION
Battery pad
SUG. RETAIL
$2.95 (ea.)
DS-317468
DESCRIPTION
SUG. RETAIL
For 77-78 XLCR; 79 XL; repl. OEM #66105-77 (rubber)
$6.95
For 70-78 XLCH; repl. OEM #66470-70
13.95
For 82-85 XL; repl. OEM #66476-73/73A
13.95
For 67-78 XLH; repl. OEM #66470-67
13.95
2401-0494
2401-0495
2401-0490
WIRE
CLIPS
•High-quality
reproduction of original clips
PART #
2401-0489
2401-0490
2401-0494
2401-0495
2401-0496
2401-0497
2401-0496
DESCRIPTION
For 57-69 XL front frame leg
For 84 XL frame head tube
For 57 45” XL, 38-48 XL horn wire
For 57-74 XL front spark plug cable
For 57-65 XL timer wire
For 57-60 XL frame head tube
OEM #
9979
10012
4703-38A
4726-36
4726-37
9977
2401-0497
SUG. RETAIL
$12.95
11.95
6.95
5.95
5.95
12.95
IRONHEAD XL
SEATS &
SISSY BARS
DS-324100
DS-324104
DS-324118
DS-324106
EXHAUST
DS-324120
BATTERY TOP COVERS
DS-324117
DS-324107
•Chromed replacement battery top
covers fit precisely and feature
vibration-absorbing cushions
BATTERY COVERS
•Feature precise formed covers for sealed and conventional batteries
PART #
DS-324100
DS-324104
DS-324106
DS-324107
DS-324117
DESCRIPTION
For 82-85 XL; repl. OEM #66347-91,
raised panel (viewing window)
For 82-85 XL; repl. OEM #66347-91,
smooth panel (viewing window )
For 70-78 XLCH; repl. OEM #66072-83T
(viewing window)
For 80-81 XL; repl. OEM #66072-83T
For 67-78 XLH
CARBURETORS
& AIR FILTERS
SUG. RETAIL
$24.95
PART #
DS-324120
DS-324118
DS-324123
DS-324123
DESCRIPTION
For 70-78 XLCH; repl. OEM #66369-70
For 82-85 XL; repl. OEM #66367-73
For 67-78 XLH; repl. OEM #s 66368-67, 66369-67
& DRIVELINE
DS-271996
17.95
ENGINE
SUG. RETAIL
$13.95
15.95
21.95 TRANSMISSION
17.95
17.95
22.95
GASKETS
& SEALS
DS-271997
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CHROME HORN
•12V horn emits loud (113 dB) signal
•4” in diameter; universal mount
•Sold each
DUAL
ELECTRIC HORNS
•Chromed horns with a relay
•Produce sound levels comparable
to those of a semi’s horn (approximately 107 dB)
•12V horn fits all motorcycles and comes with mounting hardware
•Sold as a set
PART #
DS-272128
DESCRIPTION
Twin 12V electric horns
PART #
DS-271996
DS-271997
DESCRIPTION
Slotted
Mag
SUG. RETAIL
$26.95
24.95
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
SUG. RETAIL
$42.95
CHROME MINI HORN
DASHES
& GAUGES
•Small horn can be mounted
out of sight
•Stamped steel construction
with a chrome finish and slotted
face looks great
•12V operation; fully adjustable universal mount
•Includes chrome 31/4” mounting strap
PART #
2107-0045
DESCRIPTION
21/2” slotted chrome horn
CABLES
SUG. RETAIL
$14.95
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
CUSTOM ROUND
KEY IGNITION SWITCH
•Round key design with three-position activation: off, ignition only,
or ignition and lights
PART #
DS-272112
DESCRIPTION
For 79-85 XL
FLOORBOARDS
& PEGS
SUG. RETAIL
$26.95
HARDWARE
IGNITION
SWITCH MOUNT
IGNITION SWITCH
•Chrome replacement ignition
and light switch
•Three-position switches
•Includes two keys
PART #
DS-272114
•Chrome-plated ignition switch mount
•Features a 7/8” hole that accepts
most ignition switches
•Mounts almost anywhere using a 5/16” mounting hole
DESCRIPTION
For 79-85 XL; repl. OEM #71425-77
SUG. RETAIL
$15.95
PART #
2106-0041
DESCRIPTION
Ignition switch mount
GENERAL
SUG. RETAIL
$6.95
603
IRONHEAD XL
SEATS &
SISSY BARS
OIL PRESSURE
SWITCH
OIL PRESSURE SWITCH
•Precision-calibrated replacement
oil pressure switch features heavy
contacts, brass pressure ferrules,
thermo-plastic insulators and brightly
finished steel shells
•Designed and tested to ensure consistently accurate
pressure thresholds
•Precision-calibrated
replacement oil pressure
switch features heavy contacts, brass pressure ferrules, thermoplastic insulators and brightly finished steel shells
CARBURETORS •Designed and tested to ensure consistently accurate
& AIR FILTERS pressure thresholds
EXHAUST
PART #
2106‑0125
DESCRIPTION
For 77-85 XL; repl. OEM #26554-77
SUG. RETAIL
$13.95
PART #
DS‑272159
DESCRIPTION
For 77-85 XL; repl. OEM #26554-77
SUG. RETAIL
$12.95
ENGINE
TRANSMISSION
& DRIVELINE
STOPLIGHT
SWITCH
GASKETS
& SEALS
PART #
DS‑272140
ELECTRICAL
& LIGHTING
•Replacement stoplight
switch for front brake
handlebar control
SUG. RETAIL
$6.95
STOPLIGHT
SWITCHES
custom applications
PART #
DS‑272174
DS‑272171
HYDRAULIC
STOPLIGHT SWITCHES
•Feature Bakelite insulators, heavy-duty
contacts and high-conductivity
brass terminals
HANDLEBARS, •Chrome replacement
CONTROLS &
stoplight switches
MIRRORS
•Also work great for
CABLES
DS-272191
DESCRIPTION
For 73-81 XL; repl. OEM #72001-69B
PART #
DS‑272191
DS-272174
DS‑272175
DS-272171
DESCRIPTION
For 75-76 XL; repl. OEM #72004-75
For 67-74 XL; repl. OEM #72004-70 (push)
DS-272175
DESCRIPTION
Spade-type switch for 79-85 XL;
repl. OEM #72023-51C
Screw-type switch for 77-78 XLCR;
SUG. RETAIL
$10.95
10.95
SUG. RETAIL
$12.95
12.95
DS-272195
BRAKES
2106-0128
2106-0127
HYDRAULIC
STOPLIGHT SWITCH
OIL TANKS,
FILTERS &
GAS TANKS
•Bakelite insulators, high-conductivity
brass terminals and heavy-duty contacts
PART #
2106‑0128
DASHES
& GAUGES
DS-272196
2106‑0127
HANDLEBAR SWITCHES
DESCRIPTION
Spade-type switch for 79-85 XL;
OEM# 72023-51A
Screw-type switch for 77-78 XLCR;
SUG. RETAIL
$12.95
10.95
CHASSIS,
•OEM-replacement switch kits with colorSUSPENSION, coded leads and black protective sleeves
FENDERS
•Use 48” leads
& WHEELS
•Individual switches are also available separately
•Meet or exceed OEM specifications
•Fit U.S.A. and international models
FLOORBOARDS
PART #
& PEGS
DESCRIPTION
SUG. RETAIL
FOR 82‑85 XL MODELS
CHROME SWITCHES
HARDWARE
DS‑272196
DS‑272255A
DS‑272257A
DS‑272256A
DS‑272258A
Switch kit (includes brake light switch)
Start and stop switches; repl. OEM #71589-92
Dimmer and horn switches; repl. OEM #71597-92
Right turn signal switch; repl. OEM #71591-92
Left turn signal switch; repl. OEM #71598-92
$114.95
30.95
30.95
18.95
18.95
GENERAL
Switch kit (includes brake light switch)
Start and stop switches; repl. OEM #71589-92
Dimmer and horn switches; repl. OEM #71597-92
Right turn signal switch; repl. OEM #71591-92
Left turn signal switch; repl. OEM #71598-92
89.95
21.95
22.95
22.95
13.95
FRONT BRAKE/NEUTRAL SWITCHES
604
DS‑272254A
HANDLEBAR SWITCH
BUTTON CAPS
•Made of molded plastic; sold each to
consumer; sold to dealers in 10-pack
PART #
BLACK SWITCHES
DS‑272195
DS‑272250A
DS‑272252A
DS‑272251A
DS‑272253A
DS-272155
DS-272141
Front brake switch; repl. OEM #71590-92
7.95
DESCRIPTION
SUG. RETAIL
FOR 72‑81 XL
SHORT STYLE, FITS STARTER AND HORN SWITCHES; REPL. OEM #71534‑72
DS‑272141
DS‑272154
Black
Chrome
$.95 (ea.)
2.50 (ea.)
LONG STYLE, FITS TURN SIGNAL SWITCH; REPL. OEM #71535‑72
DS‑272142
DS‑272155
Black
Chrome
.95 (ea.)
2.50 (ea.)
IRONHEAD XL
DS‑272118
SEATS &
SISSY BARS
DIMMER SWITCH
REPLACEMENT STARTER/
HORN/TURN SIGNAL SWITCH
•Chromed handlebar dimmer switch
PART #
DESCRIPTION
SUG. RETAIL
FOR 54‑72 XL
DS‑272118
DS‑272135
W/ wires; repl. OEM #70060‑29
W/o wires; repl. OEM #71840‑29
$10.95
10.95
EXHAUST
•Replaces starter, horn or turn signal switch on handlebar controls
PART #
DS‑272139
DESCRIPTION
For 73‑81 XL; repl. OEM #71484‑72A
SUG. RETAIL
$6.95
CARBURETORS
& AIR FILTERS
ENGINE
ROCKER SWITCHES
•Available in black or chrome
DS‑272151
DS‑272137
DS‑272138
DS‑272152
DS‑272153
DESCRIPTION
SUG. RETAIL
TRANSMISSION
& DRIVELINE
FOR MOST 72‑81 XL MODELS
PART #
DESCRIPTION
SUG. RETAIL
PART #
DESCRIPTION
SUG. RETAIL
PART #
RUN/OFF ROCKER SWITCH; REPL. OEM #71547‑75
HI/LO ROCKER SWITCH; REPL. OEM #71546‑75
UNIVERSAL ROCKER SWITCH; REPL. OEM #71483‑72
DS‑272137
DS‑272151
DS‑272138
DS‑272152
DS‑272153
Black
Chrome
$6.95
13.95
Black
Chrome
$6.95
13.95
Chrome
$13.95
2106‑0149
2106‑0150
MINI TOGGLE
SWITCHES
•Waterproof two‑position switch
•Use with any custom application
PART #
DS‑272177
DESCRIPTION
Toggle switch
SUG. RETAIL
$19.95
PART #
2106‑0149
2106‑0150
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
•5 amp, 1/4”
hole mini
toggle switches
TOGGLE SWITCH
GASKETS
& SEALS
DESCRIPTION
Mini high/low beam toggle switch
Mini Air Ride toggle switch
SUG. RETAIL
$9.95
9.95
CABLES
BRAKES
2120‑0409
2120‑0411
2120‑0410
2120‑0413
2120‑0412
2120‑0414
2120‑0415
2120‑0417
DASHES
& GAUGES
2120‑0416
AMP MATE-N-LOCK
CONNECTORS
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
2120‑0419
2120‑0418
•Top‑quality OEM‑style replacement
connectors and terminals
•Easy to use
•Sold each unless noted
2120‑0420
2120‑0407
2120‑0421
OIL TANKS,
FILTERS &
GAS TANKS
2120‑0422
2120‑0423
2120‑0424
FLOORBOARDS
& PEGS
2120‑0408
FOR 71‑85 XL
PART #
DESCRIPTION
SUG. RETAIL
MALE CONNECTORS
2120‑0409
2120‑0410
2120‑0411
2120‑0412
2120‑0413
2120‑0414
2120‑0415
2120‑0416
DESCRIPTION
SUG. RETAIL
FEMALE CONNECTORS (CONT)
1‑position; repl. OEM #72043‑71
8‑position; repl. OEM #70287‑81A
$.95
.95
.95
.95
1.95
1.95
2.95
2.95
FEMALE CONNECTORS
2120‑0417
PART #
.95
2120‑0418
2120‑0419
2120‑0420
2120‑0421
2120‑0422
2120‑0423
2120‑0424
$.95
.95
.95
1.95
1.95
1.95
3.95
HARDWARE
GENERAL
TERMINALS
2120‑0407
2120‑0408
Male pins (100‑pk.); repl. OEM #72039‑71A
Female sockets (100‑pk.); repl. OEM #72038‑71A
.25 (ea.)
.25 (ea.)
605
IRONHEAD XL
SEATS &
SISSY BARS
EXHAUST
CARBURETORS
& AIR FILTERS
ENGINE
2120-0510
2120-0507
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
PART #
2120‑0506
2120‑0507
2120‑0508
2120‑0509
2120‑0510
2120‑0511
2120‑0512
2120‑0513
2120‑0514
DESCRIPTION
Black
Black/red
Red
Blue
Blue/black
Brown/black
Brown/white
Gray
Gray/green
2120-0517
SUG. RETAIL
$24.95
24.95
24.95
24.95
24.95
24.95
24.95
24.95
24.95
PART #
2120‑0515
2120‑0516
2120‑0517
2120‑0518
2120‑0519
2120‑0520
2120‑0521
2120‑0522
2120‑0523
DESCRIPTION
Gray/white
Green/blue
Orange/black
Orange/white
Pink/white
Red/blue
Violet/black
White
White/black
•An inexpensive way to connect wiring
•Fully-insulated PVC construction
•Available for 18-22 gauge or 14-16 gauge wiring
•Sold in 25-packs
2120-0564
DESCRIPTION
SUG. RETAIL
.25” QUICK DISCONNECTS
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
2120‑0564
2120‑0565
2120‑0566
2120‑0567
Male quick disconnect for 18-22 gauge wire
Female quick disconnect for 18-22 gauge wire
$8.95
8.95
7.95
7.95
FORK TERMINALS
2120‑0571
2120‑0572
For 18-22 gauge wire
14.95
13.95
•An inexpensive way to connect wiring
•Fully insulated PVC construction
•Available for 18-22 gauge or 14-16 gauge wiring
•Sold in 25-packs
2120-0566
PART #
2120‑0573
2120‑0574
2120‑0575
2120‑0576
2120‑0577
2120‑0578
For
For
For
For
For
For
SUG. RETAIL
$24.95
24.95
24.95
24.95
24.95
24.95
24.95
2120-0571
2120-0573
2120-0577
SUG. RETAIL
18-22
18-22
18-22
14-16
14-16
14-16
gauge
gauge
gauge
gauge
gauge
gauge
(#8)
(#10)
(.25”)
(#8)
(#10)
(#.25”)
$8.95
9.95
9.95
8.95
6.95
7.95
2120‑0579
2120‑0580
2120‑0581
2120‑0582
2120-0587
2120-0581
SUG. RETAIL
PART #
$39.95
35.95
26.95
26.95
DESCRIPTION
26.95
49.95
2120‑0588
2120‑0589
2120‑0590
2120‑0591
2120‑0592
2120‑0593
For
For
For
For
For
For
BUTT SPLICES
PART #
DESCRIPTION
SUG. RETAIL
HEAT‑SEALABLE
2120‑0583
2120‑0584
2120‑0585
2120-0588
SUG. RETAIL
RING TERMINALS
18-22 gauge
18-22 gauge
18-22 gauge
14-16 gauge
14-16 gauge
14-16 gauge
(#8)
(#10)
(.25”)
(#8)
(#10)
(.25”)
2120-0583
•Available in fully insulated PCV or heat-sealable styles
•Heat-sealable design creates a water-tight seal
•Sold in 25-packs
606
DESCRIPTION
White/blue
White/brown
White/violet
Yellow
Yellow/black
Violet
Brown
DESCRIPTION
2120-0579
FORK TERMINALS
GENERAL
PART #
2120‑0524
2120‑0525
2120‑0526
2120‑0527
2120‑0528
2120‑0614
2120‑0615
HEAT-SHRINK QUICK DISCONNECTS AND TERMINALS
2120‑0586
2120‑0587
HARDWARE
SUG. RETAIL
$24.95
24.95
24.95
24.95
24.95
24.95
24.95
24.95
24.95
RING TERMINALS
CHASSIS,
SUSPENSION,
PART #
DESCRIPTION
FENDERS
.25” QUICK DISCONNECTS
& WHEELS
FLOORBOARDS
& PEGS
2120-0528
2120-0522
QUICK DISCONNECTS AND TERMINALS
PART #
BRAKES
2120-0514
OEM COLOR WIRE
•Perfect for shops
and do-it-yourselfers
•100’ of 18-gauge wire
TRANSMISSION on 6” spool
•Available in many
& DRIVELINE
OEM Harley-Davidson
color codes
GASKETS
& SEALS
2120-0512
PART #
DESCRIPTION
$30.95
27.95
31.95
29.95
23.95
28.95
2120-0570
SUG. RETAIL
NON‑HEAT‑SEALABLE
$20.95
21.95
25.95
2120‑0568
2120‑0569
2120‑0570
$5.95
6.95
9.95
IRONHEAD XL
SEATS &
SISSY BARS
EXHAUST
CUSTOM WIRE HARNESS
•Coated wire with retro casing
•Marine grade ignition/starter switch with retaining nut
•Relays 30 amp and 15 amp, mounting clips and hardware
•Three-way toggle
•8’ long
PART #
2120‑0387
CARBURETORS
& AIR FILTERS
DESCRIPTION
Wire harness
SUG. RETAIL
$191.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
& LIGHTING
EXTENDED HANDLEBAR
WIRING HARNESSES
HANDLEBAR WIRING
HARNESS WITH SWITCHES
AND HARDWARE
•Available in a complete 48” kit for left and right sides
•Completely soldered together, ready to install; color-coded to match
OEM specifications
•Includes switches, wire connectors, buttons, screws, stoplight switch
rubber boot and switch retaining plates
PART #
DS‑305202
DESCRIPTION
For 73-81 XL
•Replace stock harness when converting to taller handlebars
•PART #DS-305200 has a 12” extension and comes complete with all
hardware and instructions
•PART #DS-305201 has 48” long wires and 38” long black covering
which allows the installation of almost any height bars; it comes with
connectors and tie wraps
PART #
DS‑305200
DS‑305201
DESCRIPTION
For 75-81 XLH and XLCH models, 12” L
For 82-85 XL, 48” L
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
DS-325648
ELECTRICAL
TERMINAL
PLATE KIT
DS-325647
CIRCUIT BREAKERS
•Quality painted and pre-assembled terminal plate
•Includes terminal plate; OEM #72303-70, expansion nuts: OEM #7057468,
self-tapping screws; OEM #2809 and mounting hardware
FOR MOST 70‑85 XL
PART #
2401‑0604
PART #
DESCRIPTION
DESCRIPTION
For 70-74 XL
SUG. RETAIL
$13.95
SUG. RETAIL
STUD/DUAL‑SPADE STYLE
DS‑324001
30A
2130-0066
$5.95
2130-0064
30A; repl. OEM #74599-77B
15A; repl. OEM #74589-73
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
6.95
7.95
CIRCUIT BREAKERS
REPLACEMENT
HEADLIGHT
SOCKET AND
TERMINAL KIT
HARDWARE
•15, 30 or 40A versions available
•Sold each
FOR 70‑85 XL
PART #
DESCRIPTION
SUG. RETAIL
STUD/DUAL‑SPADE STYLE
•OEM-quality
replacement parts
PART #
2120‑0426
DASHES
& GAUGES
FLOORBOARDS
& PEGS
TWO‑STUD STYLE
DS‑325647
DS‑325648
CABLES
SUG. RETAIL
$15.95
17.95
SUG. RETAIL
$39.95
DS-324001
HANDLEBARS,
CONTROLS &
MIRRORS
2130‑0065
2130‑0066
30A
40A
$5.95
5.95
GENERAL
TWO‑STUD STYLE
DESCRIPTION
For 75-85 XL; repl. OEM #72047-71
SUG. RETAIL
$3.95
2130‑0063
2130‑0064
30A; repl. OEM #74599-77B
15A; repl. OEM #74589-73
6.95
8.95
607
IRONHEAD XL
SEATS &
SISSY BARS
DS-280046
DS-280044
EXHAUST
CARBURETORS
& AIR FILTERS
2001-0553
DS-280035
ENGINE
53/4” CHROME
HEADLIGHT ASSEMBLIES
•Available in a 12V, 55/60W H4 system
•DOT approved assemblies include housing,
TRANSMISSION inner and outer rings, rubber seal and all wiring
& DRIVELINE
•See page 615 for replacement bulbs
PART #
DESCRIPTION
SUG.
RETAIL
53/4” headlight assembly; repl. OEM #67705-74
$52.95
FOR 75‑85 XL
GASKETS
& SEALS
DS‑280044
FOR 63‑74 XL
DS‑280046
2060‑0151
53/4”
headlight assembly; repl. OEM #67732-72
Repl. headlight for most 53/4”
headlight assemblies
52.95
24.95
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
53/4” BULLET
HEADLIGHT HOUSING
DESCRIPTION
53/4” bullet headlight housing
SUG. RETAIL
$414.95
SINGLE-MOUNT
HEADLIGHT
BRACKET
•Fits many stock and custom front ends
HARDWARE
GENERAL
608
DESCRIPTION
Wide single-mount bracket
SUG. RETAIL
$23.95
DESCRIPTION
For custom applications with Springer front ends
25.95
14.95
24.95
SUG. RETAIL
$99.95
•Chrome single-headlight bracket attaches to
many stock front ends with lower pinch bolts
•Measures 17/8” wide, with slots centered at 47/8”
DESCRIPTION
Bottom-mount bracket
SUG. RETAIL
$14.95
HEADLIGHT
MOUNT KIT
•Chrome clip-on style headlight brackets
•51/2” brackets fit tube-type custom front
ends without headlight provision, such as
custom triple trees and competition forks
•Use with our side-mount headlight, PART #DS-280036
•Sold in pairs
DESCRIPTION
Side-mount brackets
SUG. RETAIL
$49.95
49.95
49.95
BOTTOMMOUNT
HEADLIGHT BRACKET
PART #
DS‑285010
SIDE-MOUNT
HEADLIGHT BRACKETS
PART #
DS‑285050
DESCRIPTION
Chrome Bottom-mount headlight w/ H-4 bulb
Chrome side-mount headlight w/ H4- bulb
Black bottom-mount headlight w/ H-4 bulb
Repl. chrome bottom-mount headlight shell
only w/ trim ring (bulb not included)
Repl./optional chrome bezel
Repl. headlight w/ bulb for most 53/4”
headlight assemblies
•Relocates headlight to lower
shock mount for a cleaner look
•Brilliantly polished stainless
steel finish
•All mounting hardware included
•For use with Springer fork
with shock
PART #
2001‑0260
CHASSIS,
SUSPENSION, •Chrome single-mount
headlight bracket is 37/8” long with
FENDERS
13/8” mounting slots, centered at 55/8”
& WHEELS
PART #
PART #
DS‑280035
DS‑280036
2001‑0553
DS‑280099
2060-0151
NOSTALGIA
HEADLIGHT
RELOCATION BRACKET
NOTE: Sold as a housing only; no bulb or glass included.
FLOORBOARDS
DS‑285015
& PEGS
•DOT approved headlight assembly include
shell, ring, socket, mounting bolts, high-beam
indicator light and a 12V 55/60W H4 bulb
•Chrome or gloss black finish available
•Optional/replacement chrome trim ring
available separately
•See page 615 for replacement bulbs
2001‑0555
2060‑0151
•Spun billet aluminum housing
•Housing features a high-gloss black
anodized finish
•Traditional brass clamp ring
•Fully machined with a non-wavy
mirrored finish
•Brass bracket
•Fits all SAE lamps
•Lamps, mounting block and bolts sold separately
•Pigtail connector kit 8-0902A recommended
•6” diameter; 5” length
PART #
2001‑0605
53/4” CHROME
HEADLIGHT ASSEMBLY
•Includes cad-plated
beveled washer; OEM
# 67815-59A, 1/2”-20 hex nut; OEM #7845,
and lock washer OEM #1068
SUG. RETAIL
$16.95
PART #
2401‑0602
DESCRIPTION
For 63-76 XL
SUG. RETAIL
$9.95
IRONHEAD XL
SEATS &
SISSY BARS
HEADLIGHT
VISOR COVERS
•Chrome‑plated, perfectly
DS‑373650
formed steel visor cover fits
over stock headlight visors
•Available with cut‑away for oil and generator lights
VISOR FOR
HEADLIGHTS
•Visors are easy to install; add a custom look
•Chrome steel construction
•Sold each
SUG.
PART #
2001‑0369
DESCRIPTION
For 53/4” headlight;
repl. OEM #67750‑88T
EXHAUST
PART #
DS‑373651
DESCRIPTION
SUG. RETAIL
CARBURETORS
& AIR FILTERS
FOR 75‑85 XL
DS‑373650
DS‑373651
RETAIL
Headlight visor cover with cut‑away; repl. OEM #67871‑85
Headlight visor cover, plain
$19.95
19.95
ENGINE
$10.95
TRANSMISSION
& DRIVELINE
LAYDOWN TAILLIGHT
ASSEMBLIES
•Will bolt directly to the fender
on most 73‑85 XL models
(adapter bracket included)
•For replacement bulbs, see page 615
GASKETS
& SEALS
PART #
DS‑272199
DS‑272198
NOTE: Not DOT approved.
DESCRIPTION
SUG. RETAIL
FOR 73‑85 XL
DS‑272198
DS‑272199
Laydown taillight assembly
Laydown taillight assembly w/ blue dot
$44.95
49.95
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
TAILLIGHT ASSEMBLY
VISOR FOR 53/4” HEADLIGHTS
•Made of stamped chrome steel
•Sold each
PART #
BLV42000
DESCRIPTION
For 53/4” headlight
•Chrome assembly base with red lens
•For replacement bulbs, see pages 615
SUG.
RETAIL
$29.95
CABLES
PART #
DS‑272024
DESCRIPTION
For 73‑84 Shovelhead; repl. OEM #s 68008‑73A, 68007‑77A
SUG. RETAIL
$37.95
OIL TANKS,
FILTERS &
GAS TANKS
LED TAILLIGHT
•Shines brighter than standard
taillights but draws less current
•Bolts on directly to most XL models
•Not DOT approved
TAILLIGHT
•Chrome housing
PART #
DS‑272023
DESCRIPTION
For 57‑72 XL; repl. OEM #68010‑64B
SUG. RETAIL
$32.95
PART #
DS280457
DESCRIPTION
OEM‑style light for most 73‑E84 models
2010‑0796
BRAKES
SUG. RETAIL
$67.95
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
2010‑0797
FLOORBOARDS
& PEGS
TAILLIGHT
ASSEMBLY
HARDWARE
•Updated design
•Complete taillight assembly includes chrome
base, Chris taillight lens, bulb, lens screws,
lens gasket and terminal for ground wire
PART #
CH8048
DESCRIPTION
For 73‑85 XL; repl. OEM #s
68008‑73A and 68007‑77A
CUSTOM BOBBER LED TAILLIGHT
AND LICENSE PLATE MOUNT
SUG.
RETAIL
•12V, LED dual‑function design with tag light
•Available in chrome or black finish
•Includes mounting hardware, mounts to existing license plate bracket mounting
holes on most FXD and XL models
•ECE approved (not DOT approved)
$34.95
PART #
2010‑0796
DESCRIPTION
Chrome
SUG. RETAIL
$119.95
PART #
2010‑0797
DESCRIPTION
Black
GENERAL
SUG. RETAIL
$119.95
609
IRONHEAD XL
SEATS &
SISSY BARS
2010‑0899
2010‑1066
EXHAUST
CARBURETORS
& AIR FILTERS
2010‑1072
BOBBER
STYLE TAILLIGHT/
LICENSE PLATE ASSEMBLIES
•Stainless steel or black light housing with red glass lens
•Black powder‑coated backing plate
•Available in side‑mount or OEM styles
•Side‑mount style features 3/4” mounting holes
•1928 Ford and 1932 Ford are 12V single‑filament dual‑bulb design
TRANSMISSION
•1940 Ford and 1950 Pontiac are dual‑function 12V LED style
& DRIVELINE
ENGINE
2010‑0612
2010‑1056
NOTE: Side mount license plate assemblies will not fit OEM axles on 54-78 XL models.
GASKETS
& SEALS
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
CABLES
PART #
OIL TANKS,
FILTERS &
GAS TANKS
PART #
1928 FORD STYLE
1932 FORD STYLE (CONT)
2010‑0613
2010‑0902
2010‑0683
2010‑0904
2010‑0794
2010‑0905
2010‑0684
2010‑1070
2010‑1075
2010‑1064
2010‑1071
2010‑1076
2010‑1067
2010‑1072
2010‑1077
Vertical side mount, stainless steel light
$181.95
Vertical side mount, black light
214.95
Vertical radius side mount, stainless steel light
214.95
Vertical radius side mount, black light
222.95
Horizontal side mount, stainless steel light
191.95
Horizontal side mount, black light
214.95
Original Equipment mount, stainless steel light
252.95
Original Equipment mount, black light
214.95
Vertical side mount, stainless steel housing
with brass grill
295.95
Vertical side mount, black housing with black grill
261.95
Vertical side mount, black housing with brass grill
295.95
Vertical radius side mount, stainless steel housing
with brass grill
295.95
Vertical radius side mount, black housing with black grill 261.95
Vertical radius side mount, black housing with brass grill
295.95
Horizontal side mount, stainless steel housing
with brass grill
295.95
Horizontal side mount, black housing with black grill
261.95
Horizontal side mount, black housing with brass grill
295.95
Original Equipment mount, stainless steel housing
with brass grill
295.95
Original Equipment mount, black housing with black grill
261.95
Original Equipment mount, black housing with brass grill
295.95
1932 FORD STYLE
2010‑0612
2010‑0903
Vertical side mount, black light
191.95
214.95
SUG.
RETAIL
DESCRIPTION
2010‑0588
2010‑0898
2010‑0614
2010‑0897
2010‑0682
2010‑0899
2010‑0793
2010‑0900
2010‑1065
2010‑1069
2010‑1074
2010‑1066
BRAKES
SUG.
RETAIL
DESCRIPTION
Vertical radius side mount, black light
Horizontal side mount, black light
Repl. lens
$214.95
222.95
191.95
214.95
252.95
214.95
31.95
1940 FORD STYLE
2010‑0787
2010‑0786
2010‑0785
2010‑0788
Vertical side‑mount, stainless steel light
Vertical radius side‑mount, stainless steel light
Horizontal side‑mount, stainless steel light
232.95
252.95
232.95
232.95
1950 PONTIAC STYLE
2010‑0791
2010‑0913
2010‑0790
2010‑0912
2010‑0789
2010‑0914
2010‑0792
2010‑0915
Vertical side‑mount, stainless steel light
Vertical side‑mount, black light
Vertical radius side‑mount, stainless steel light
Vertical radius side‑mount, black light
Horizontal side‑mount, stainless steel light
Horizontal side‑mount, black light
183.95
214.95
195.95
214.95
183.95
214.95
183.95
214.95
WILLY’S STYLE, LED
2010‑1055
2010‑1054
2010‑1056
2010‑1053
160.95
179.95
160.95
160.95
DASHES
& GAUGES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
FLOORBOARDS
& PEGS
2010‑1058
2010‑1059
2010‑1062
2010‑1061
1928 FORD TAILLIGHT GRILLES
HARDWARE
2010‑1060
•Fits all NYC Choppers 1928 Ford style taillights
•Aluminum construction and available in polished, black or brass finish
PART #
2010‑1058
2010‑1059
2010‑1060
GENERAL
610
DESCRIPTION
Polished
Black
Brass
SUG. RETAIL
$97.95
109.95
125.95
SPYDER TAILLIGHT OVERLAYS
•For NYC Choppers 1950 Pontiac style taillights
•Available in chrome or black finish
PART #
2010‑1061
2010‑1062
DESCRIPTION
Chrome
Black
2010‑1062
SUG. RETAIL
$39.95
39.95
TAILLIGHT/LICENSE PLATE MOUNT CONDUIT
•Attaches behind side mount taillight/license
plate frames with tabs
•Hides and protects wires
•18” L
PART #
2120‑0386
DESCRIPTION
Taillight/license plate mount conduit
SUG. RETAIL
$9.95
IRONHEAD XL
2010-0589
SEATS &
SISSY BARS
EXHAUST
2010-1073
CARBURETORS
& AIR FILTERS
2010-0896
BOBBER STYLE TAILLIGHTS
•Stainless steel or black housing with red glass lens
•12V dual-bulb design
ENGINE
2010-0611
FOR ALL CUSTOM XL APPLICATIONS
PART #
DESCRIPTION
SUG. RETAIL
1928 FORD STYLE
2010-0896
2010-1063
2010-1068
2010-1073
PART #
DESCRIPTION
SUG. RETAIL
1932 FORD STYLE
Black
Stainless steel housing with brass grille
Black housing with black grille
black housing with brass grille
$124.95
212.95
179.95
212.95
2010-0611
2010-0901
Stainless steel
Black
$88.95
99.95
Stainless steel
Repl. lens
114.95
36.95
TRANSMISSION
& DRIVELINE
MODEL T STYLE
2010-0589
2010-0590
GASKETS
& SEALS
ELECTRICAL
& LIGHTING
BULLET
TAILLIGHTS
MAKO
TAILLIGHTS
•Investment-cast
aluminum light
housing in either polished
or black finishes
•Extra thick injection-molded
polycarbonate plastic lens
•Custom 12V 15-element LED board
with two phases (brake light and
running light)
•Outside diameter of the red taillight
lens is 15/8”
•Sold each
PART #
2010-1093
2010-1094
DESCRIPTION
Polished
Black
SUG. RETAIL
$120.95
120.95
MODEL B
TAILLIGHTS
2010-1079
•Investment-cast
aluminum light
housing in either
polished or black finishes
•Extra thick injection-molded
polycarbonate plastic lens
•Custom 12V 15-element LED board
with two phases (brake light and
running light)
•Mounting brackets sold separately;
see GENERAL section
2010-1080
•Outside diameter of the red taillight lens is 15/8”
•When illuminated it is easily visible at approximately 300 feet
in pitch darkness
•Sold each
PART #
2010-1079
2010-1080
DESCRIPTION
Polished
Black
•CNC lathe-turned
6061 T-6 aluminum
light housing in
either polished or
black finishes
•Extra thick
injection-molded
polycarbonate
2010-1081
plastic lens
•Custom 12V 15-element
LED board with two phases (brake light and
running light) and three wires (ground, brake
2010-1082
and running lights)
•Two 1/4-20 button head Allen bolts included for mounting on Biltwell
brackets (see at right and in GENERAL section), custom fender bracket
or Model-B style taillight/license plate brackets
•Outside diameter of housing is just over 25/8” and the red taillight
lens is 15/8”
•When illuminated it is easily visible at approximately 300 feet in
pitch darkness
•Sold each
MODEL B
TAILLIGHT BRACKETS
PART #
2010-1081
2010-1082
PART #
2010-1083
2010-1085
DESCRIPTION
Polished
Black
SUG. RETAIL
$79.95
79.95
SUG. RETAIL
$119.95
119.95
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
DASHES
& GAUGES
FLOORBOARDS
& PEGS
•Constructed out of laser-cut 1/8”
thick sheet steel with a matte black
electroplate finish
•Finish is for rust-resistance
only while brackets are
stored/shipped
•Brackets will require polishing
2010-1085
and chroming or painting
•Custom bending/fabrication is required
CABLES
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
2010-1083
DESCRIPTION
Sissy bar bracket
Fender bracket
HANDLEBARS,
CONTROLS &
MIRRORS
HARDWARE
GENERAL
SUG. RETAIL
$9.95
9.95
611
IRONHEAD XL
SEATS &
SISSY BARS
REPLACEMENT TAILLIGHT
LENSES AND GASKETS
EXHAUST
DS‑174530
•Top‑quality replacement lenses
and gaskets
•Lenses are available in clear, red or red
with blue dot
•Sold each unless noted
CARBURETORS
& AIR FILTERS PART #
LHD‑1
LHD‑1‑B
DESCRIPTION
SUG. RETAIL
ENGINE
For 73‑85; repl. OEM #68008‑73B, 68048‑93B
For 57‑72; repl. OEM #68090‑69
$8.95
4.95
RED LENS WITH BLUE DOT
LHD‑1‑B
DS‑174527
DESCRIPTION
SUG. RETAIL
TAILLIGHT GASKETS
RED LENS
LHD‑1
DS‑272025
PART #
For 73‑85
DS‑174530
DS‑173395
DS‑174527
For 73‑85 lens; repl. OEM #68027‑90 (5‑pk.)
For 57‑72 lens; repl. OEM #68122‑55 (10‑pk.)
For 73‑85 base; repl. OEM #68123‑73 (10‑pk.)
$4.95 (ea.)
2.95 (ea.)
.95 (ea.)
11.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
LAYDOWN TAILLIGHT
LENS WITH
TOP TAG WINDOW
TAILLIGHT VISOR
•Great looking, easy‑to‑install
chrome light visor
•Get a smooth, clean custom look
•Matches the rear angle of OEM
ELECTRICAL saddlebags and most OEM rear fenders
•Provides a unique look for XL models
& LIGHTING
•Can be used with most laydown license plate mounts
HANDLEBARS,
CONTROLS &
MIRRORS
PART #
DS‑272036
DESCRIPTION
For 73‑85 XL
U.S. Des. Patent #s 276,187 and 276,376.
SUG. RETAIL
$23.95
PART #
DS‑720078
DESCRIPTION
Taillight visor for 73‑85 XL
SUG. RETAIL
$15.95
CABLES
BRAKES
OIL TANKS,
FILTERS &
GAS TANKS
TAILLIGHT COVER
•Space‑age composite construction
with a brilliant chrome finish
•Designed for use on motorcycles with the license plate below
the taillight, cover hides the clear window on the top of the lens
PART #
2010‑0575
DESCRIPTION
For 73‑85 XL w/o bobbed rear fender
SUG. RETAIL
$29.95
DASHES
& GAUGES
TAILLIGHT COVER
•Chrome cover accents your taillight
•Slots on top of covers give a new look – different from other
taillight covers
•Available for use with standard fenders
PART #
DS‑720246
CHASSIS,
SUSPENSION,
FENDERS
& WHEELS
DESCRIPTION
For 73‑85 XL
FLOORBOARDS
& PEGS
SUG. RETAIL
$29.95
CH‑8431A
FLAT LENS MARKER LIGHTS
HARDWARE
•Designed to use single‑filament bulbs 1156
and double‑filament bulbs 1157
•Feature chrome housing
•Sold each
GENERAL
612
PART #
COMPLETE MARKER LIGHT KIT
•Includes four lights, front and rear mounting
clamps/brackets and two extra red lenses
PART #
CH‑0006
DESCRIPTION
For 73‑85 XL (single‑filament kit)
DESCRIPTION
SUG. RETAIL
FOR 73‑85 XL
SUG. RETAIL
$86.95
CH‑8395A
CH‑8395R
CH‑8431A
CH‑8431R
Double‑filament, amber lens
Double‑filament, red lens
Single‑filament, amber lens
Single‑filament, red lens
$21.95
21.95
21.95
21.95
IRONHEAD XL
TURN SIGNAL LENSES
DHD‑1R
DHD‑1A‑B
•Made in accordance with all DOT requirements; available with
or without blue dot reflector installed
SEATS &
SISSY BARS
NOTE: When a blue dot reflector is installed in a DOT-approved lens, the lens no longer passes
DOT standards. Also, check local laws before installing blue dot lenses and clear lenses.
FRONT OR REAR
APPLICATIONS
For 73‑85 XL
AMBER
LENS
DHD‑1A
AMBER LENS
W/ BLUE DOT
DHD‑1A‑B
RED
LENS
DHD‑1R
RED LENS
W/ BLUE DOT
DHD‑1R‑B
TURN SIGNAL ASSEMBLIES
PART #
DHD‑1R
DHD‑1R‑B
SUG. RETAIL
$1.95
5.95
SUG. RETAIL
$13.95
13.95
2040‑1138
2040‑1159
EXHAUST
CARBURETORS
& AIR FILTERS
REPLACEMENT
TURN SIGNAL
LENS GASKET
DESCRIPTION
For 73‑83 XL; repl. OEM #68514‑73 (threaded 5/16”‑24)
For 77‑80 XL; 83‑85 XL; repl. OEM #68515‑77A (not threaded)
2040‑1148
SUG. RETAIL
$1.95
5.95
CH‑0001
•Complete turn signals replace OEM
signals and feature chrome bodies
with amber lenses
•Feature single‑filament bulbs
•All products meet or exceed DOT specifications
•Made in the U.S.A.; sold each
PART #
CH‑0001
CH‑0002
PART #
DHD‑1A
DHD‑1A‑B
OEM #
68483‑73
2040‑1130
PART #
DS‑174528
ENGINE
DESCRIPTION
For 73‑85 XL; repl.
OEM #68481‑73 (10‑pk.)
SUG. RETAIL (EA.)
$1.95
2040‑1140
2040‑1132
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
2040‑1150
ELECTRICAL
& LIGHTING
MARKER LIGHTS
2040‑1136
2040‑1134
•Marker lights with aluminum housings
•Single or dual filament as indicated;
3/8” mounting bolt size
•Smoked lens versions feature
amber bulbs
•Sold in pairs
2040‑1165
2040‑1152
2040‑1163
2040‑1156
2040‑1146
2040‑1154
2040‑1142
2040‑1162
HANDLEBARS,
CONTROLS &
MIRRORS
2040‑1144
CABLES
POLISHED FINISH/ALUMINUM BODY
LENS COLOR/FILAMENT
PART #
SUG. RETAIL
Red/single filament
Red/dual filament
2040‑1148
2040‑1149
$32.95
32.95
ROUND #1 – 1.85” LENS DIAMETER; 2.6” BODY LENGTH;
2.8” BODY DEPTH; 10MM MOUNTING STUD
Red/single filament
2040‑1158
37.95
Red/single filament
2040‑1159
LENS COLOR/FILAMENT
PART #
SUG. RETAIL
OBLONG – 2.5” W X 1.4” H LENS ; 3.25” OVERALL LENGTH;
10MM MOUNTING STUD
Red/single filament
Red/dual filament
Smoke/single filament
Smoke/dual filament
Amber/single filament
Amber/dual filament
2040‑1138
2040‑1139
2040‑1130
2040‑1131
2040‑1132
2040‑1133
$34.95
34.95
34.95
34.95
34.95
34.95
PART #
SUG. RETAIL
2040‑1150
2040‑1151
$32.95
32.95
Red/single filament
2040‑1160
37.95
Red/single filament
2040‑1161
LENS COLOR/FILAMENT
PART #
OBLONG – 2.5” W X 1.4” LENS ; 3.25” OVERALL LENGTH;
10MM MOUNTING STUD
Red/single filament
Red/dual filament
OIL TANKS,
FILTERS &
GAS TANKS
37.95
CHROME FINISH/ALUMINUM BODY
LENS COLOR/FILAMENT
BRAKES
Red/single filament
Red/dual filament
Smoke/dual filament
Amber/dual filament
2040‑1140
2040‑1141
2040‑1134
2040‑1135
2040‑1136
2040‑1137
LENS COLOR/FILAMENT
PART #
SUG. RETAIL
DASHES
& GAUGES
CHASSIS,
$35.95
35.95 SUSPENSION,
35.95
FENDERS
35.95
& WHEELS
35.95
35.95
FLOORBOARDS
& PEGS
37.95
BLACK SATIN FINISH/ALUMINUM BODY
LENS COLOR/FILAMENT
PART #
SUG. RETAIL
Red/single filament
Red/dual filament
Smoke/dual filament
Amber/dual filament
2040‑1152
2040‑1153
2040‑1156
2040‑1157
2040‑1154
2040‑1155
$32.95
32.95
32.95
32.95
32.95
32.95
Red/single filament
2040‑1164
2040‑1162
SUG. RETAIL
OBLONG – 2.5” W X 14.4” H LENS ; 3.25” OVERALL LENGTH;
10MM MOUNTING STUD
37.95
37.95
Red/single filament
2040‑1165
2040‑1163
HARDWARE
$37.95
37.95
Red/single filament
Red/dual filament
Smoke/dual filament
Amber/dual filament
2040‑1146
2040‑1147
2040‑1142
2040‑1143
2040‑1144
2040‑1145
34.95
34.95
34.95
34.95
34.95
34.95
GENERAL
613
IRONHEAD XL
REAR
TURN SIGNAL
STUDS/NUTS
SEATS &
SISSY BARS
•Chrome rear turn signal
studs with nuts are available
in standard lengths
EXHAUST
PART #
DS‑280251
CARBURETORS
& AIR FILTERS
GASKETS
& SEALS
•Chrome finish
•Sold each
PART #
DS‑280247
CHROME REAR TURN SIGNAL
RELOCATION KIT
•Now it’s easy to move your signals back for more
saddlebag clearance
•Especially useful with oversized bags
•Each kit includes all wire, brackets, spacers, connectors and hardware
required for quick installation
PART #
DS‑280318
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
DESCRIPTION
For 75‑85 XL models; moves lights to fender, mounts
with two 1/4”‑20 studs into OEM license plate bracket;
repl. OEM #s 68512‑89 and 68430‑89
CH‑0536
CHROME TURN SIGNAL SPACERS
CABLES
SUG. RETAIL
$4.95
REAR
TURN SIGNAL
BRACKET
ENGINE
TRANSMISSION
& DRIVELINE
DESCRIPTION
For 79‑80 XL; repl. OEM #68528‑77A
$37.95
•Chrome spacer kits in a variety of lengths for that custom look
PART # DESCRIPTION SUG. RETAIL
CH‑0536 Assortment kit
$7.95
CH‑0531 1/4” (4‑pk.)
3.95
1
CH‑0532 /2” (2‑pk.)
2.95
PART # DESCRIPTION
CH‑0533 3/4” (2‑pk.)
CH‑0534 1” (2‑pk.)
CH‑0535 1 1/4” (2‑pk.)
SUG. RETAIL
$2.95
3.95
4.95
SUG. RETAIL
$6.95
TURN SIGNAL
BRACKET-TO-LAMP
MOUNT
SUG. RETAIL
CH‑0533
DESCRIPTION
For 73‑85 XL w/ screw; repl. OEM #68480‑73
•Chromed mount
PART #
DS‑280249‑4
DESCRIPTION
For 73‑85 XL (4‑pk.); repl. OEM #68477‑73
SUG. RETAIL
$7.95
HANDLEBAR
TURN SIGNAL CLAMP
•Chromed handlebar clamp and screws
•Made in the U.S.A.; sold each
PART #
DS‑280248
DESCRIPTION
For 82‑85 XL, as well as any 1” handlebars;
repl. OEM #s 68487‑82/68486‑82A
BRAKES
SUG. RETAIL
$7.95
OIL TANKS,
FILTERS &
GAS TANKS
RUN, BRAKE AND TURN
SIGNAL MODULE
DASHES
& GAUGES
•Turns stock or custom turn signals
into running and brake lights;
also retains turn signal capabilities
•Increases visibility from the rear
of the motorcycle
•Built‑in load equalizer will allow
running of even the smallest lights or a minimum of two lights only
•Comes complete with wiring, connectors and
easy‑to‑follow instructions
CHASSIS,
SUSPENSION, ILLUMINATOR
FENDERS
PRO III HARLEY
& WHEELS
•Built‑in flasher, self‑canceller
and load equalizer
•Controls run, brake and turn lights in rear
FLOORBOARDS
•Controls run and turn lights in front
& PEGS
HARDWARE
•New turn indicator feeds for dash
•Protected against shorts
•10A per station
•Works with any LED or incandescent bulbs and any 12V system
PART #
2050‑0033
DESCRIPTION
For 73‑85 XL and custom applications
w/o self‑cancelling turn signals
PART #
DS‑272235
$118.95
FLASHERS
•Directional and hazard flashers
•DOT certified
PART #
•OEM replacement 12V hazard flasher relay
614
SUG. RETAIL
$104.95
SUG. RETAIL
HAZARD
FLASHER
GENERAL RELAY
PART #
2050‑0034
DESCRIPTION
For 73‑85 XL (hardwire design)
DESCRIPTION
For all 65‑85 XL; repl. OEM #68541‑64A
2050‑0067
DESCRIPTION
2050‑0068
SUG. RETAIL
FOR 65‑85 XL
SUG. RETAIL
$6.95
2050‑0067
2050‑0068
Bi‑metal 12V, 2‑pin flasher; repl. OEM #68541‑64B
Solid state 12V flasher; repl. OEM #68543‑64C
$5.95
16.95
IRONHEAD XL
53/4” QUARTZ LIGHT
•12V quartz halogen
light manufactured by
Candlepower comes
complete with H4 P43T 60/55W bulbs;
replacement bulbs also available
•Twice the illumination of standard sealed beams
•Available in 53/4” size with special locating tab for
H-D headlight housings
•DOT approved
53/4” HALOGEN
SEALED BEAM
•Self-contained 12V high/low beam
35/50W light
PART #
2060‑0250
DESCRIPTION
12V 35/50W (OEM #H4467)
SUG. RETAIL
$16.95
EXHAUST
DESCRIPTION
12V 60/55W
SUG. RETAIL
$39.95
•12V, #73 style
•Approx. .750” L x .200” diameter
•Sold to dealers in packs of 10
DESCRIPTION
Clear 1.4W, single-filament
SUG. RETAIL
$1.95 (ea.)
2001-0377
•Halogen bulbs available in standard
or Superwhite Xenon styles
•Standard bulbs use clear glass bulb
•Superwhite bulbs use a special blue filter coating to
produce a whiter, brighter light
PART #
LARGE GLOBE BULB
2001‑0374
2001‑0375
2001‑0378
PART #
2060‑0181
2001‑0376
2001‑0377
2001‑0379
TYPE
DESCRIPTION
SUG. RETAIL
H3
H3
H4
35W
55W
55/60W (heavy-duty)
$5.95
5.95
5.95
H3
H3
H4
35W
55W
55/60W (heavy-duty)
8.95
8.95
14.95
GASKETS
& SEALS
SUPERWHITE
DESCRIPTION
Red 32/3 cp, dual-filament
SUG. RETAIL
$1.55 (ea.)
SMALL GLOBE BULBS
DESCRIPTION
Clear, dual-filament (10-pk.)
Clear, 8/23W, double-filament (pr.)
Clear 21/5W, dual-filament (10-pk.)
SUG. RETAIL
$2.50 (ea.)
2.95
.95 (ea.)
PART #
2060‑0026
DS‑282080
2060‑0332
ELECTRICAL
& LIGHTING
HANDLEBARS,
CONTROLS &
MIRRORS
2060-0026
DS-282013
•12V; approx. 1.03” L x .720” diameter
PART #
DS‑282012‑PK
2060‑0202
DS‑282013
ENGINE
TRANSMISSION
& DRIVELINE
STANDARD
•12V (1157 style); 1” diameter globe
•Sold to dealer in 10-pk.
CARBURETORS
& AIR FILTERS
2001-0374
HALOGEN
HEADLIGHT BULBS
INDICATOR LIGHT BULBS
PART #
DS‑282096PK
PART #
DS‑280009
SEATS &
SISSY BARS
DESCRIPTION
Amber 23/8W, dual-filament (pr.)
Amber 21/6 cp, dual-filament (10-pk.)
Red 21/6 cp, dual-filament (pr.)
SUG. RETAIL
$3.95
2.50 (ea.)
3.95
CABLES
BRAKES
A
B
C
D
E
F
G
I
H
J
K
L
M
N
O
OIL TANKS,
FILTERS &
GAS TANKS
REPLACEMENT BULBS
•All bulbs are packaged in blister
packs and sold in packs of two unless
otherwise noted
WATTS OR
REF. #
STYLE # VOLTS CANDLEPOWER
A-62
A
6V
3W
A-72
A
12V
3.4W
GE53
A
12V
1C
A-1272 B
12V
2W
GE89
C
13V
6C
GE1004 D
12.8V 15C
GE1016 E
14V
21/6C
GE1034 E
14V
32/3C
7528
E
12V
21/5W
GE1157 E
12.8V 32/3C
A-4813 E
6V
17/5.3W
A-4829 E
12V
32/3C
1157A
F
12V
32/3C
1157H
G
12V
50/15W
A-3625 H
6V
25/25W
A-3603 H
12V
25/25W
A-3598H H
6V
15/15W
A-5659 I
6V
35/35W
GE67
J
13.5V 4C
GE97
J
13.5V 4C
GE68
J
13.5V 4C
GE57
K
12V
2C
GE1895 K
14V
2C
Q
P
BLISTER PACK
QUANTITY
2
2
2
2
2
2
2
2
2
2
2
2
2
1
2
2
2
1
2
2
2
2
2
SUG.
PART #
RETAIL
A62‑BP
$1.95
A72‑BP
1.95
53‑BP
1.95
A1272‑BP
2.50
89‑BP
1.95
1004‑BP
2.50
1016‑BP1
2.50
1034‑BP
2.50
7528‑BP
2.95
1157‑BP
1.95
A4813‑BP
2.95
A4829‑BP
2.95
3
2060‑0255
2.50
2
H1157‑BP
8.95
A3625‑BP
4.50
A3603‑BP
4.50
A3598H‑BP
4.50
A5659‑BP
2.95
67‑BP
1.95
97‑BP
1.95
68‑BP
2.50
57‑BP
1.95
1895‑BP
1.95
REF. #
GE1889
GE93
A-4527
1156
A-4513
1156A
GE194
7443
6235J
6245J
6260J
A-7025
6235B
6245B
6260B
6235Y
6245Y
6260S
6260SA
6245BA
6260BA
1
R
S
T
WATTS OR
STYLE # VOLTS CANDLEPOWER
L
14V
2C
M
12.8V L5C
M
12V
32C
M
12.8V M
6V
21C
N
12.8V O
14V
2C
P
13.5V Q
12V
35/35W
Q
12V
45/45W
Q
12V
60/60W
Q
12V
35/35W
R
12V
35/35W
R
12V
45/45W
R
12V
60/60W
S
12V
35/35W
S
12V
45/45W
T
12V
60/60W
U
12V
60/60W
V
12V
45/45W
V
12V
60/60W
Also substitutes for GE1035.
2
U
BLISTER PACK
QUANTITY
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
Halogen.
3
V
DASHES
& GAUGES
SUG.
PART #
RETAIL
1889‑BP
$1.95
CHASSIS,
93‑BP
1.95 SUSPENSION,
A4527‑BP
2.95
FENDERS
2060‑0235
1.95
& WHEELS
A4513‑BP
2.95
2060‑02363
2.95
194‑BP
1.95 FLOORBOARDS
2060‑0163
5.95
& PEGS
6235J‑BP
2.95
6245J‑BP
2.95
6260J‑BP
2.95
A7025‑BP
2.95
HARDWARE
6235B‑BP
3.50
6245B‑BP
3.95
6260B‑BP
3.95
6235Y‑BP
2.95
6245Y‑BP
2.95
6260S‑BP
4.50
6260SA‑BP
4.50
6245BA‑BP
3.95
6260BA‑BP
4.50
GENERAL
Amber.
615

ironhead xl - GUTSCHROME

Transcription

Similar documents

3.6 hydraulic parts for brake and clutch 12.16 mb

Accessoire Harley-Davidson et Moto Custom

shovelhead - GUTSCHROME