D-1282 Product Catalog

Transcription

Bright Ideas. Innovative Solutions.
Product
Catalog
INDUSTRIAL AND HAZARDOUS
Lighting Solutions
Lighting Solutions
LED LIGHTING
LED Lighting for general purpose industrial, commercial applications, hazardous
locations, paint/spray booths, outdoor, marine, low-bay, and inspection applications.
FLUORESCENT LIGHTING
Fluorescent lighting and compact fluorescent (CFL) lighting fixtures available with an assortment of lamp options ranging
from T5, T5HO, T8 and T8HO with a variety of wattages per our industrial fluorescent lighting series.
HID LIGHTING
High Intensity Discharge Lighting for industrial and commercial applications. Available in high pressure
sodium, metal halide, fluorescent, incandescent, and even some compact fluorescent lamp options.
These rugged fixtures will withstand some of the most demanding applications.
SPECIALTY/CUSTOM PRODUCTS AND LIGHTING ACCESSORIES
LDPI manufactures specialty and portable lighting solutions to fit your application requirements with several
fixture configurations and classifications available. Direct light where you need it most!
LDPI also offers several accessories for your lighting applications: removable lens film on
a roll, lens film sheets, blast booth lens covers, and a booth corner or hip mount option.
LDPI, Inc.
4404 Anderson Drive
Eau Claire, WI 54703
LDPI, Inc. Tech Center
206 Cashman Drive
Chippewa Falls, WI 54729
Toll Free: 1-800-854-0021
Fax: 715-726-0112
Web: www.ldpi-inc.com
E-mail: [email protected]
WHY LDPI?
Our company
LDPI began designing, developing, manufacturing and distributing light fixtures in 1981. Since that time we have been recognized as an
industry leader in fixtures that meet the physically demanding requirements of industrial environments. For many of our fixtures it is all about
the mechanical enclosure that is designed, thoroughly tested and agency-approved to confirm their unique ability to withstand the rigorous
environmental conditions they will be exposed to. We specialize in fixtures that illuminate areas that are hazardous in nature, but we are also
known for industrial task, inspection, and general purpose fixtures that withstand the test of time while providing the correct amount of light to
ensure that workers can clearly see what they are producing and assembling.
Our mission
To be the #1 USA made fixture manufacturer who specializes in understanding how to design and manufacture lighting fixtures and control
systems for industrial environments.
Our commitment
• We will use top quality materials in our fixtures.
• We will only purchase LED components from Tier 1 LED suppliers.
• We will ensure that when in operation our fixture operating temperatures will not exceed the maximum junction temperature (Tj) of the LED.
• We will continuously strive to create the maximum delivered lumens per watt that is physically possible.
• We will warrant our fixtures against defects caused in the manufacturing process.
• We will develop and communicate industry leading education through our sales team and website.
• We will train our sales, engineering and production staff to be focused on one thing only - Customer Satisfaction.
• We will listen to your requirements to design and develop a lighting and controls solution that is centric to your application and environment.
• We will strive to list all of our products to North American Safety Standards, Energy Star and DLC where applicable.
• We will certify that all of our fixtures are RoHS compliant.
From refineries, chemical plants, wastewater treatment facilities, industrial processes, and other lighting applications that require superior
illumination plus protection from water, corrosives, temperature extremes, and explosive gases, dusts or fibers, we will provide the best
lighting possible.
It’s simple, think LDPI…
CONTENTS
LED
FLUORESCENT
HID
LE101
Pg: 5
222
Pg: 27
HID FL
Pg: 51
LE121
Pg: 6
229H
Pg: 28
HID H
Pg: 52
LE151
Pg: 7
236
Pg: 29
HID H2
Pg: 53
LEFP
Pg: 8
INS2
Pg: 30
HID XP
Pg: 54
LEINS2
Pg: 9
INS3
Pg: 31
HID XP2
Pg: 55
LEINS3
Pg: 10
240 8Ft.
Pg: 32
LE201
Pg: 11
376
Pg: 33
LE203
Pg: 12
379i
Pg: 34
Task Cart
Pg: 59
LEVP
Pg: 13
384
Pg: 35
Multi Fixture Task Cart
Pg: 60
LE300
Pg: 14
240
Pg: 36
Explosion Proof Cart
Pg: 61
240 LED
Pg: 15
241
Pg: 37
Custom Lighting
Pg: 62
241 LED
Pg: 16
260-261
Pg: 38
Accessories
Pg: 63
260-261 LED
Pg: 17
280-281
Pg: 39
400 LED
Pg: 18
400
Pg: 40
Slim Light LED
Pg: 19
400SLB
Pg: 41
Lighting Fundamentals
Pg: 64
LE401
Pg: 20
440 2x4
Pg: 42
IP Code
Pg: 65
LEHL
Pg: 21
440T/THO
Pg: 43
Light: Levels and Color
Pg: 65
H LED
Pg: 22
Slim Light
Pg: 44
Glossary
Pg: 66
380 LED
Pg: 23
CFL
Pg: 45
Weights - Shipping
Pg. 67
380
Pg: 46
Index
Pg. 68
SPECIALTY
INFORMATION
LED
LIGHTING
LED CONTENTS
SERIES
Class I D1 Class I D2 Class II
Class III
Corrosion
Resistant
Paint
Spray
Marine◊
Wet
Damp
LE101
Damp General
Only Industrial
•
Page #
5
LE121
•
6
LE151
•
7
LEFP
•
8
LEINS2
•
9
•
10
LE201
LEINS3
•
•
11
LE203
•
•
12
LEVP
•
•
13
•
•
14
LE300
○
240 LED
241 LED
•
•
•
•
•
•
•
•
•
260-261 LED
400 LED
•
Slim Light LED
LE401
•
•
•
•
•
LEHL
•
•
H LED
•
•
•
•
•
•
380 LED
•
•
•
15
•
16
•
•
•
17
•
•
•
18
•
•
•
•
•
○
•
•
19
•
•
20
•
○
•
•
◊ Marine: # = Inside Drip Proof (UL 1598) ○= Outside Salt Water (UL 1598A)
We use our best effort to make our catalog accurate. We reserve the right to correct typographical
errors and omissions. Specifications may be changed subsequent to printing.
○
•
•
21
•
22
•
23
GENERAL
INFORMATION
LE101
The LE101 Series is an ordinary location LED fixture that is available in 4 Ft. and 8 Ft.
lengths. This fixture is ideal for warehouses, general industrial areas or other locations
where task/area lighting is needed.
CONSTRUCTION
20 Gauge Steel Powder Coated White Housing
Acrylic or Polycarbonate Lens
LED
Commercial & Institutional Facilities ● Industrial
APPLICATIONS
General Lighting
Task Lighting
LISTINGS
UL Listed to US and Canadian Safety Standards
UL1598 General Applications
UL8750
PART ORDER MATRIX
Example: LE101-79-5-V1-C-S-SM-AC-EM
SERIES
LUMENS*
CCT
VOLTAGE
SUPPLY
LE101
39: 3900
59: 5900
79: 7900
118: 11800
3: 3500K
4: 4000K
5: 5000K
V1: 120-277V
(driver voltage)
C: 6 Ft. Blunt End Cord
CP1: 6 Ft. Cord with 120V Twist Lock Plug
LENGTH
MOUNT
LENS
OPTIONS
S: 4 Ft.
T: 8 Ft.
SM: Surface Mount
AM: 45° Angle Mount
AC: Clear Acrylic
PC: Clear Polycarbonate
PD: Diffused Polycarbonate
EM: Emergency Battery Backup
Notes:
Fixtures supplied with a cord are intended for overhead/ceiling Mounting with electrical outlet mounted directly overhead.
* For 8 Ft. fixtures, double the lumens.
4Ft
Fixture Width
(X)
Model
# Rows
Nominal Lumen
Output at 5000K
8Ft
Input Current
(A)
Wattage
Nominal Lumen
Output at 5000K
Wattage
Input Current
(A)
LE101-39
9-1/8"
1
3900
37
0.31-0.12
7800
74
0.62-0.27
LE101-59
9-1/8"
2
5900
52
0.44-0.19
11800
104
0.88-0.38
LE101-79
9-1/8"
2
7900
74
0.62-0.27
15800
147
1.23-0.53
LE101-118
12-5/8"
3
11800
111
0.93-0.39
23600
222
1.85-0.80
ADDITIONAL INFORMATION
4 Ft. Fixture Dimensions
48 1/8"
32"
X
3 3/16"
3 1/2"
7/8" Electrical
Knock-outs
On Each End
4 1/4"
8 Ft. Fixture Dimensions
7/8" Electrical Knock-outs
96 5/16"
3 1/4"
32"
16 3/16"
X
7/8" Electrical
Knock-outs
On Each End
3 1/2"
32"
4 1/4"
7/8" Electrical Knock-outs
Product design and specifications subject to change without notice.
Reference www.ldpi-inc.com for the most current version.
1-800-854-0021
www.ldpi-inc.com
LDPI® is a registered trademark of LDPI, Inc. © LDPI, Inc.
5
GENERAL
INFORMATION
LED
LE121
The LE121 is a premium cable or surface mount linear fixture with directional LED
elements. Its adjustability allows for a focused light on your task area regardless of
how it is mounted.
CONSTRUCTION
LISTINGS
UL8750
APPLICATIONS
Aisle Lighting
Assembly Areas
General Lighting
Task Lighting
Warehouse
PART ORDER MATRIX
Example: LE121-P22-4-2R-V1-D1-C1-D-PW-WG
SERIES
POWER
VOLTAGE
CCT
LENS
LE121
P16: 256W (27420Lm)*
P18: 288W (30516Lm)*
P22: 364W (37400Lm)*
*Nominal power (watts and lumens) output
for a 4 Ft., 4 row fixture at 5000K. See web
site for other configurations.
U: 120-277V
C: 347V
35: 3500K
40: 4000K
50: 5000K
LA: Acrylic (Clear)
LP: Polycarbonate (Clear)
LAF: Acrylic (Frosted)
LPF: Polycarbonate (Frosted)
LENGTH
ROWS
MOUNT
OPTIONS
4: 4Ft.
6: 6Ft.
8: 8Ft.
2: 2 Row
3: 3 Row
4: 4 Row
CB: Cable Mount (Std)
SM: Surface Mount
PW: Powder Coat White (Std)
PB: Powder Coat Black
C1: 6’ Cord Blunt End
C2: 6’ Cord with 120V Plug
C3: 6’ Cord with 277V Plug
WG: Wire Guard
EM: Emergency Battery Backup (90 min.)
OS: Occupancy Sensor
D1: 0-10V Dimming
D2: DALI
D3: Use with OS (Occupancy Sensor)
22”
(559mm)
4 Ft.: 46” (1168mm)
6 Ft.: 68” (1727mm)
8 Ft.: 90” (2286mm)
6
1-800-854-0021
www.ldpi-inc.com
7”
(178mm)
GENERAL - BOOTH
INFORMATION
LE151
The LED, LE151 Series fixture was specifically designed to provide directional light
for paint and powder booths. This ordinary location fixture was designed with special
extrusions that allow you to aim the LEDs to get the light where it is needed vs. lighting
the entire room and places of no value.
APPLICATIONS
Paint and Powder Booths
(Outside Behind Glass Panel)
Blast Booths
Prep, Inspection, Sanding
CONSTRUCTION
Polycarbonate Frosted Lens
LISTINGS
PART ORDER MATRIX
LED
Example: LE151-4-4-136-5-V1-C
SERIES
LENGTH
ROWS
LUMENS*
LE151
2: 2 Ft.
3: 3 Ft.
4: 4 Ft.
5: 5 Ft.
6: 6 Ft.
2: 2 Rows
3: 3 Rows
4: 4 Rows
*Value is lumens/100; dependent on driver/module combinations
defined by Length of Fixture and Number of Rows. Nominal values are
shown in Matrix below. See lumen chart for available configurations.
CCT
VOLTAGE
SUPPLY
3: 3500K
4: 4000K
5: 5000K
V1: 120-277V
For the example above:
4 Ft., 4 Row, 13600 Lumens at 5000K
LE151-4-4-136-5-V1-C
Lumen Chart
Light Output of Fixture at 5000K CCT
Dimensions
2 Rows
3 Rows
4 Rows
A
25”
33 1/2”
42”
Length
3 Ft.
4
4 Ft.
5 Ft.
6 Ft.
3 Rows
# MTG
Brackets
2 Ft.
6
2 Rows
Dimensions
B
25 7/8”
C
15”
B
36 7/8”
C
26”
B
47 7/8”
C
37”
B
58 7/8”
C
48”
B
69 7/8”
C
59”
D
29 1/2”
4 Rows
1 5/16"
3 15/16"
2 Ft.
3 Ft.
4 Ft.
5 Ft.
6 Ft.
Lumens
3400
5100
6800
8500
10200
Watts
36
55
73
91
109
Lumens
5100
7600
10200
12700
15300
Watts
55
82
109
137
164
Lumens
6800
10200
13600
17000
20400
Watts
73
109
146
182
219
1 3/16" SLOT Ø 3/8" x 1" 2 PLACES
E: Mounting Bracket
A
D
C
B
D
1-800-854-0021
www.ldpi-inc.com
7
GENERAL
INFORMATION
LED
LEFP
LEFP general industrial ceiling mount fixtures are the LED alternative to traditional
2x2, 1x4 and 2x4 fluorescent fixtures. The thin sheet LED provides a highly uniform,
smooth, low glare lighting.
CONSTRUCTION
Aluminum Powder Coated White Housing
LISTINGS
UL8750
DLC
APPLICATIONS
General Lighting
Office
Example: LEFP-48-U-40-4
PART ORDER MATRIX
SERIES
POWER
VOLTAGE
CCT
SIZE
LEFP
35: 35W (3328Lm)*
48: 48W (4504Lm) (2x4 only)*
*Nominal Lumens for 4 Ft. fixture at 3500K.
See website for other configurations.
U: 120-277V, 50/60Hz
30: 3000K
35: 3500K
40: 4000K
1: 1x4
2: 2x2
4: 2x4
Notes:
Surface mount kit available separately.
Contact factory for availability.
47.7”
(1211.5mm)
1x4
2x4
11.7”
(297.1mm)
2.3”
(58.4mm)
2x2
23.7”
(601.9mm)
47.7”
(1211.5mm)
2.5”
(63.5mm)
23.7”
(601.9mm)
23.7”
(601.9mm)
2.3”
(58.4mm)
Corner Bracket Detail
8
1-800-854-0021
www.ldpi-inc.com
GENERAL - INSPECTION
INFORMATION
LEINS2
The LEINS2 is an LED inspection lighting fixture that was specifically designed for
focusing light in a particular direction for inspection and surface defect detection
applications. This fixture is capable of saving 45% or more energy than the traditional
fluorescent fixture.
APPLICATIONS
Certification
Defect Inspection
Paint Inspection
Process Inspection
Validation
CONSTRUCTION
Aluminum Powder Coated Black Housing
Acrylic Frosted Lens
LISTINGS
UL8750
PART ORDER MATRIX
LED
Industrial
Example: LEINS2-P21-V1-2-PB-C
SERIES
SOURCE
VOLTAGE
LEINS2
P13: 26W (2630Lm)*
P21: 42W (4200Lm)*
*Nominal power (watts and lumens) output for a 4 Ft., 1 row
fixture at 5000K. See web site for other configurations.
V1: 120-277V
LENGTH
FINISH
OPTIONS
2: 2 Ft.
4: 4 Ft.
8: 8 Ft.
PW: Powder Coat White
PS: Powder Coat Special (Must specify RAL #)
C: Cord with Blunt End
CP1: Cord with 120V Plug
CP2: Cord with 277V Plug
EM: (Emergency Battery Backup)
Ceiling/Wall Mount Kit (PN: 8171)
Cable/Chain Mount Kit (PN: 8170)
P13
Nominal Lumens
Luminaire Wattage
Input Voltage
2'
1500
13
120-277
0.11/0.05
4'
2630
26
120-277
0.22/0.10
8'
5300
51
120-277
0.43/0.19
P21
Nominal Lumens
Luminaire Wattage
Input Voltage
Input Current (A)
2'
2100
21
120-277
0.18/0.08
4'
4200
42
120-277
0.35/0.16
8'
8400
84
120-277
0.70/0.31
Input Current (A)
23 15/16"
23 1/2"
4 11/16"
5 9/16"
Carriage Screw Mounting Track.
Provided With (2) Ø 5/16" X 3/4"
Carriage Screws.
45 15/16"
45 1/2"
Die Cast Connector
3/8" Trade Size
89 15/16"
89 1/2"
1-800-854-0021
www.ldpi-inc.com
9
Industrial
INFORMATION
LED
LEINS3
The LEINS3 Series is a must have when the finish of any surface counts! This fixture
is designed to create a well defined lamp image using light and dark contrasts that
cause defects in the paint show to show for ease of detection and repair. This fixture
is available as a 2’, 4’, 6’, and 8’ fixture and has the flexibility to allow the use of 1, 2,
3 or 4 rows of LED’s. There are a multitude of lens, cord and housing color options in
this fixture series.
CONSTRUCTION
20 Gauge Steel Powder Coated Housing
LISTINGS
UL8750
Example: LEINS3-P9-6-4-V1-D1-C-LA-RS-4-PB
SERIES
SOURCE
LENGTH
ROWS
VOLTAGE
LEINS3__
Blank: Std
W: Wide Housing (2 row only)
P6: 94W (8174Lm)*
P9: 148W (12774Lm)*
*Nominal power (watts
and lumens) output for
a 4 Ft., 4 row fixture at
5000K. See web site for
other configurations.
2: 2 Ft.
4: 4 Ft.
6: 6 Ft.
8: 8 Ft.
1 (No 2 Ft.)
2
3
4 (No 8 Ft.)
V1: 120-277V
APPLICATIONS
Certification
Defect Inspection
Paint Inspection
Process Inspection
Validation
PART ORDER MATRIX
DIMMING
CORD
LENS
Blank: No Dimming
D1: Step Dimming (Not available for all sizes)
D2: 0-10V
D3: DALI (Not available for all sizes)
Blank: No Cord
C1: 6 Ft. Cord with 120V Twist Lock Plug
C2: 6 Ft. Cord with 277V Twist Lock Plug
LF: Tempered Glass Lens with Frosted Lens Insert
LFS: Tempered Glass Striped Lens with Frosted Insert
LG: Tempered Glass Lens
LGL: Tempered Glass Lens with Linear Gradient Insert
LGS: Tempered Glass Striped Lens
REFLECTOR
FINISH
CCT
RS: Aluminum Specular Reflector
3: 3000K
RDW: Soft Diffused White Reflector 4: 4000K
RW: Reflective White Reflector
5: 5000K
PW: Powder Coat White
1 Row
2 Ft.
4 Ft.
6 Ft.
8 Ft.
10
2 Row
3 Row
4 Row
LEINS3
LEINS3
LEINS3W
LEINS3
LEINS3
B
10”
17 1/2”
20 1/2”
25”
32 1/2”
A
n/a
28”
C
n/a
23 3/4”
A
50”
C
47 1/2”
A
72”
C
70”
B
A
94”
n/a
C
70”
n/a
1-800-854-0021
www.ldpi-inc.com
A
3.2”
C
WET / DAMP
INFORMATION
LE201
The LE201 is a wet/damp listed fixture featuring a die cast aluminum housing and an
acrylic or polycarbonate lens. With an IP66 rating, this wide distribution fixture is ideal
for wash and prep bays, parking garages, and industrial areas.
APPLICATIONS
Machining Areas
Prep Areas
Tunnels
Wash Down Areas
CONSTRUCTION
Cast Aluminum Powder Coated White Housing
LISTINGS
ETL Certified to UL and CSA Safety Standards
UL1598 Wet/Damp
UL8750
IP66
PART ORDER MATRIX
LED
Food & Beverage Processing ● Industrial ● Pulp & Paper ● Shipyards / Marine ● Water Treatment
Example: LE201-P79-50-V1-VAF-C-M-W
SERIES
SOURCE
CCT
VOLTAGE
LENS
LE201
P37: 37W (3000Lm)
P57: 57W (4100Lm)
P79: 79W (5250Lm)
P100: 100W (6050Lm)
50: 5000K
V1: 120-277V
VAP: V-shaped Clear Acrylic Patterned Lens
VAF: V-shaped Frosted Acrylic Patterned Lens
VPC: V-shaped Clear Polycarbonate Patterned Lens
SUPPLY
MOUNT
FINISH
C: Cord with blunt end
CP1: Cord with IP Rated Twist Lock Plug 120V
CP2: Cord with IP Rated Twist Lock Plug 277V
M: Surface Mount Bracket.
Uses standard snap on stainless
steel brackets. Included.
W: White Powder Coat
B: Black powder Coat
R: Raw Aluminum
26 1/16"
Led Module
7 13/16"
6 3/4"
Cast Aluminum Housing
Enclosure With Cooling Fins
Lens
7 1/16"
3 5/8"
Cord Grip
Only On Fixture If Ordered
With The Corded Option
Reflector
Led Module
Stainless Steel
Mounting Brackets
2"
5/16"
Ø 3/4" Conduit Knock-out Holes
In Both Ends Of Casting
16"
Ø 1/4" X 5/8" Slot
1-800-854-0021
www.ldpi-inc.com
11
WET / DAMP
INFORMATION
LED
LE203
Suitable for interior or exterior applications. This LED, lightweight, vapor tight,
nonmetallic fixture is ideal for corrosive or wet/damp environments. The LE203 fixture
features a fiberglass housing with an acrylic frosted or acrylic frosted ribbed lens, a
continuous poured in place gasket design, and comes standard with surface mount
brackets. The LE203 is ideal for commercial industrial or institutional applications
providing maximum light output where humidity, dust, or fumes are possible.
CONSTRUCTION
Fiberglass White Housing
Acrylic Frosted or Ribbed Lens
LISTINGS
UL1598 Wet/Damp
UL8750
NEMA 4X
NSF @1500psi
Example: LE203-77-4-V1-4-AF-SM-EM
APPLICATIONS
Machining Areas
Prep Areas
Tunnels
Wash Down Areas
PART ORDER MATRIX
SERIES
LUMENS
CCT
VOLTAGE
LE203
38: 42W (3850Lm*) (2 Ft.)
77: 84W (7700Lm*) (4 Ft.)
154: 168W (15400Lm*) (8 Ft.)
*Nominal Lumens
3: 3500K
4: 4000K
5: 5000K
V1: 120-277V
LENGTH
LENS
MOUNT
OPTIONS
2: 2 Ft.
4: 4 Ft.
8: 8 Ft.
ARF: Acrylic Ribbed Frosted Lens
AF: Acrylic Frosted Lens
SM: Surface Mount Bracket
AM: 45° Angle Mount
SL: Stainless Steel Latches
Note: For chemical resistance information please see website.
Dimensions (Nominal)
Acrylic ribbed frosted lens depth: 2.13”
Acrylic frosted lens depth: 3.5”
A
ARF: Standard
B
C
D
AF: Acrylic frosted lens
5.75”
PART #
LE203-38
LE203-77
LE203-154
A
C
D
6.75”
6.75”
6.75”
7.33”
7.33”
7.33”
“B” measurement: with acrylic ribbed frosted lens is 4.25"
“B” measurement with acrylic frosted lens is 5.75”
Mounting
•
•
•
•
B
27.25” 4.25”
51.75” 4.25”
100.19” 4.25”
Offers a huge advantage over more traditional enclosures.
Durable, stainless steel Mounting hardware.
No drilling necessary for the housing for installation.
Installation time is dramatically reduced, providing lower installation costs.
Standard Mounting Bracket Kits
Included with each fixture
P/N 6686: Two brackets per kit. 1 kit needed per fixture.
Optional Mounting
45° Mounting bracket kit
P/N 5102 - Kit includes:
(2) 45° brackets
(2) 5081 brackets
Std. Latch
Detail
3 9/32”
45°
Standard Mounting bracket
12
1-800-854-0021
www.ldpi-inc.com
45° Mounting option
WET / DAMP
INFORMATION
LEVP
LEVP vapor proof fixtures (Jelly Jar) are designed to replace traditional 100 watt
incandescent and 32 watt CFL type fixtures. The LEVP features long lasting LED
construction and is suitable for wet and damp locations where moisture is present.
APPLICATIONS
Elevator Pits
Foundries
Power Plants
CONSTRUCTION
Cast Aluminum Powder Coated Gray Housing
Glass Globes or Polycarbonate Lens
LISTINGS
UL1598 Wet/Damp
UL8750
IP65
PART ORDER MATRIX
LED
Example: LEVP-14-U-53-G2-C
SERIES
POWER
VOLTAGE
LEVP
14: 14W (1123Lm) (clear)
U: 120-277V, 50/60Hz
CCT
OPTICS
MOUNT
53: 5300K
L1: Clear Low Profile Polycarbonate
L2: Frosted Low Profile Polycarbonate
G1: Clear Glass Globe and Guard
G2: Frosted Glass Globe and Guard
C: Ceiling
P: Pendant
W: Wall
5.56”
7.35”
3.50”
5.46”
11.23”
10.93”
11.26”
9.45”
9.10”
4.15”
4.15”
4.52”
4.52”
9.09”
4.15”
4.52”
7.350”
5.391”
3.465”
5.091”
4.031”
5.462”
5.413”
4.031”
5.450”
4.031”
1-800-854-0021
www.ldpi-inc.com
13
MARINE
INFORMATION
LED
LE300
The LE300 Series is an energy efficient alternative to metal halide and high pressure
sodium HID fixtures. This copper-free, cast aluminum fixture is designed for indoor and
outdoor applications including: marine, high bay, low bay, and flood applications. This
fixture incorporates 24 high power LED’s with multiple optical distribution patterns and
comes standard with a CCT of 5000K.
APPLICATIONS
Exterior Lighting
General Lighting
Offshore Platforms
Power Plants
Refineries
CONSTRUCTION
Cast Aluminum Copper Free Housing
Tempered Glass Lens
LISTINGS
UL1598A Marine Outside
UL8750
NEMA 4X
IP66
PART ORDER MATRIX
Example: LE300-P11-V1-F3-M-C
SERIES
SOURCE
VOLTAGE
MOUNT
OPTICS
LE300
P11: 107W* (11000Lm)
P8: 82W* (9000Lm)
P5: 55W* (6400Lm)
*Nominal Watts
V1: 120-277V
V2: 277-480V, 55W only
F1: Ceiling 1/2” Hub
F3: Pendant 3/4” Hub
F4: Yoke mount 1/2” Hub
X1: Wall mount 1” Hub
X2: Stanchion 1 1/4” Threaded
X3: Angled stanchion 1 1/4” Threaded
X5: Angled stanchion 1 1/2” Threaded
T1: Type I
T2: Type II
T3: Type III
F: Type V Frosted3
N: Type V Narrow 16° FWHM3
M: Type V Medium 70° FWHM3
W: Type V Wide 120° FWHM3
OPTIONS
C: Cord with Blunt End1, 2
CP1: Cord with IP Rated Twist Lock Plug 120V1
CP2: Cord with IP Rated Twist Lock Plug 277V1
D: Dimming (0-10V dimming driver) (Can not be ordered with corded option)
G: Lens Guard
4K: CCT of 4000K
7K: CCT of 7000K
PB: Black Powder Coat Finish
PW: White Powder Coat Finish
PG: Gray Powder Coat Finish
(Blank): Natural Unpainted Finish
12”
5 3/4"
Notes:
1 Marine Indoor Drip-Proof Type Listing:
Cord options available for ceiling, pendant and yoke mount only.
2 Marine Outdoor Type Listing: Blunt end cord option for yoke mount only.
3 Optic Types F, N, M and W are available for the Type V optics only.
12”
4"
Ø 3/8" X 5/8" SLOT
2"
Ø 9/16"
5/8"
12”
12”
4 3/4"
Ø3/8"
TYP
6 3/16"
3/4" NPT
5 1/8"
5 1/8"
1/2" & 3/4" NPT (2 PLCS)
F1 & F2 MOUNT
1” NPT 2 PLCS
(X1 MOUNT)
3 1/4"
7 9/16"
1.25” or 1.5” NPT
STRAIGHT OR ANGLED at 25°
X2-X5 MOUNT
14
1-800-854-0021
www.ldpi-inc.com
2 7/16"
Ø 13/32"
TYP
HAZARDOUS
INFORMATION
240 LED
The 240 LED Series is a very versatile fixture for use in hazardous environments. It
is an ideal fixture for industrial applications, wet locations and task lighting. Optional
adjustable mounting brackets allow for precise aiming in multiple angles suitable for
most applications. With multiple hub locations, the 240 LED Series can meet most of
your wiring needs. LED lamps included.
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
CIII
UL1598 Wet/Damp
IP65
PART ORDER MATRIX
LED
Chemical Processing ● Industrial ● Metals & Mining ● Oil / Gas ● Water Treatment
APPLICATIONS
Coal & Dust Storage
Machining
Paint & Powder Storage
Tunnels
Example: 240 LEDS5-4L-UNV1-TS-AM
SERIES
SOURCE
CCT
LAMP QTY
VOLTAGE
HUB
240 LED
L: Low Ballast Factor
S: Standard Ballast Factor
H: High Ballast Factor
4: 4000K
5: 5000K
2L: 2 Lamps
3L: 3 Lamps
4L: 4 Lamps
5L: 5 Lamps
6L: 6 Lamps
347: 347V
UNV1: 120-277V
TS: Top and Side Hubs
OPTIONS
SS: Stainless Steel Housing
AM: Adjustable Mounting Brackets for Surface Mounting
CB: Cable Mount: (Includes 5’ Cable)
WH: 3 Wire Whip
F: Fusing
W: Wire Guard
P: Polycarbonate Lens
A: Acrylic Lens
Operating Temperature Codes Based on 40° C Ambient
Fixture
Class I, D2
Groups A,B,C,D
Class II D2
Groups F,G
Class III
240 LED
T5=100°C
T4A=120°C
T4A=120°C
1/2 NPT HUBS
1/2 NPT BOTH ENDS
BRACKETS FOR
OPTIONAL
MOUNTING KITS
HINGED REFLECTOR
INTEGRATED ACCESS
DOOR HINGE
A
HINGED
DOOR
FRAME
ROTARY
DRAW
LATCHES
51 1/2"
53 1/8"
5 5/16”
A:
2 LAMP: 12 3/16"
3 & 4 LAMP: 16 3/16"
5 & 6 LAMP: 20 11/16"
Adjustable Mounting Brackets
for Surface Mounting
Accessory
Item #
Chain Mount Kit
7979
Vertical Mounting
Bracket Kit
10357
Description
1-800-854-0021
www.ldpi-inc.com
15
HAZARDOUS - BOOTH
Industrial
INFORMATION
LED
241 LED
The 241 Series is an ideal product for a multitude of areas including Paint Spray
Booths, Prep Areas, Inspection Areas, Sanding or Machining Areas, even where
Grain or Coal Dust may be a concern. This 4 lamp 4’ fixture comes with T8 LED
replacement lamps. This fixture series can be built with low, standard and high ballast
factor ballasts and is available with 4000 and 5000K LEDs. Must be mounted hinge
side up. LED Lamps and 5 Ft. 3 wire whip included.
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
UL1598 Wet/Damp & Paint Spray
Example: 390241 LED-S5
SERIES
SOURCE
CCT
390241 LED
4: 4000K
5: 5000K
APPLICATIONS
Blast Booths
PART ORDER MATRIX
Model
Input
Voltage
(VAC)
Input
Current
(A)
Input
Frequency
(Hz)
Source
(Ballast Factor)
Luminaire
Wattage
(W)
Nominal
Lumen
Output
Color
Temperature
(CCT)
390241-LED
120-277
0.42 - 0.18
50/60
L: Low
50
5600, 5800
4000K, 5000K
390241-LED
120-277
0.48 - 0.21
50/60
S: Standard
58
6400, 6600
4000K, 5000K
390241-LED
120-277
0.62 - 0.27
50/60
H: High
74
7400, 8000
4000K, 5000K
5-1/8”
53 1/8”
16
1-800-854-0021
www.ldpi-inc.com
15 1/8”
14 1/2”
52 1/2”
HAZARDOUS - BOOTH
INFORMATION
260-261 LED
The 260/261 LED Series is a product designed specifically for Paint Spray Booths.
These fixtures can be built with low, standard and high ballast factor ballasts and are
available with 4000 and 5000K LEDs. The 260 LED Series allows for both front and
rear access using a paint spray cutoff switch when the front door frame is opened. The
261 Series is a rear access only fixture and does not require paint spray cutoff. Must
be mounted hinge side up. LED lamps and 8 Ft. wire whip included.
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
UL1598 Wet/Damp and Paint Spray
PART ORDER MATRIX
LED
Industrial
APPLICATIONS
Blast Booths
260 LED: Front and rear access
261 LED: Rear access only
SERIES
SOURCE
LED COLOR TEMP
260: 4 Lamp Inside and Rear Access Fixture
261: 4 Lamp Rear Access Fixture
4: 4000K
5: 5000K
Models
Input
Voltage
(VAC)
Input
Current
(A)
Input
Frequency
(Hz)
Source
(Ballast Factor)
Luminaire
Wattage
(W)
Nominal
Lumen
Output
Color
Temperature
(CCT)
390260/261-LED
120-277
0.42 - 0.18
50/60
L: Low
50
5600, 5800
4000K, 5000K
390260/261-LED
120-277
0.48 - 0.21
50/60
S: Standard
58
6400, 6600
4000K, 5000K
390260/261-LED
120-277
0.62 - 0.27
50/60
H: High
74
7400, 8000
4000K, 5000K
49
13
”
/16
53
5 3/4”
”
1/4
Rear Access Panel
Models 260 and 261
21 3/4”
18 3/8”
7 5/8”
51 1/4”
12”
12”
HOLE DETAIL
CUT LIGHT HOLE
19 5/8” X 51 1/4”
3/8” TYP.
260 LED
Note:
Optional Panel Stiffener Kit Sold Separately:
PN: 1704 (Fits 18Ga. Panels Only)
12”
7 5/8”
3 13/16”
19 5/8”
12”
3 13/16”
5/16” Dia.
12 Holes
261 LED
1-800-854-0021
www.ldpi-inc.com
17
HAZARDOUS - BOOTH
Industrial
INFORMATION
LED
400 LED
The 400 Series Rear Access product is an ideal paint spray booth product when a rear
access fixture is desired. This 4’ fixture is available with 2, 4 & 6 lamp options, can be
built with low, standard and high ballast factor ballasts and is available with 4000 and
5000K LED lamps. LED lamps and 5 Ft. 3 wire whip Included.
APPLICATIONS
Blast Booths
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
NFPA 33
PART ORDER MATRIX
SERIES
SOURCE
CCT
390421-LED: 2 Lamp
390441-LED: 3 Lamp
390461-LED: 4 Lamp
4: 4000K
5: 5000K
Models
Input Voltage
(VAC)
Input Current
(A)
Input Frequency
(Hz)
Source
(Ballast Factor)
Luminaire Wattage
(W)
Nominal
Lumen Output
Color Temperature
(CCT)
390421-LED
120-277
0.21 - 0.09
50/60
L: Low
25
2800, 2900
4000K, 5000K
390421-LED
120-277
0.24 - 0.10
50/60
S: Standard
29
3200, 3300
4000K, 5000K
390421-LED
120-277
0.31 - 0.13
50/60
H: High
37
3700, 4000
4000K, 5000K
390441-LED
120-277
0.42 - 0.18
50/60
L: Low
50
5600, 5800
4000K, 5000K
390441-LED
120-277
0.48 - 0.21
50/60
S: Standard
58
6400, 6600
4000K, 5000K
390441-LED
120-277
0.62 - 0.27
50/60
H: High
74
7400, 8000
4000K, 5000K
390461-LED
120-277
0.63 - 0.27
50/60
L: Low
75
8400, 8700
4000K, 5000K
390461-LED
120-277
0.73 - 0.32
50/60
S: Standard
87
9600, 9900
4000K, 5000K
390461-LED
120-277
0.93 - 0.40
50/60
H: High
111
11100, 12000
4000K, 5000K
Fixture Dimensions
3 1/2”
C
D
Mounting Dimensions
Type
Model
A
B
C
D
E
F
4 Ft. 2 Lamp
390421
10 1/2”
12 1/2”
50 1/4”
52 3/8”
10 3/4”
7”
4 Ft. 4 Lamp
390441
15 1/2”
17 1/2”
50 1/4”
52 3/8”
15 3/4”
12”
4 Ft. 6 Lamp
390461
20 1/2”
22 1/2”
50 1/4”
52 3/8”
20 3/4”
17”
50 1/4”
1 1/8”
A
B
E
16”
16”
16”
FIXTURE CUTOUT
HOLE DETAIL (4 FT. FIXTURES)
5/16” TYP
1/2” TYP
50 7/8”
18
1-800-854-0021
www.ldpi-inc.com
1 7/8”
Ø 5/16” DIA.
12 Holes
1 7/8”
F
HAZARDOUS - BOOTH
INFORMATION
Slim Light LED
The Slim Light LED Series features a 20 gauge white powder coat steel housing that is
only 2 ¼” thick. The Slim LED Series is available as a 4’ fixture with 2, 4 and 6 LED lamp
options, it can be built with low, standard and high ballast factor ballasts and is available
with 4000 and 5000K LEDs. This series provides a hinged front door lens assembly with
a paint spray cutoff switch when opened. This fixture must be installed with the hinge
side up when being horizontally mounted. LED lamps and 8 Ft. wire whip included.
APPLICATIONS
Blast Booths
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
PART ORDER MATRIX
LED
Industrial
SERIES
SOURCE
CCT
390420: 2 Lamp Fixture
4: 4000K
5: 5000K
Models
Input
Voltage
(VAC)
Input
Current
(A)
Input
Frequency
(Hz)
Source
(Ballast
Factor)
Luminaire
Wattage
(W)
Nominal
Lumen
Output
Color
Temperature
(CCT)
390420-LED
120-277
0.21 - 0.09
50/60
390420-LED
120-277
0.24 - 0.10
50/60
L: Low
25
2800, 2900
4000K, 5000K
S: Standard
29
3200, 3300
4000K, 5000K
390420-LED
120-277
0.31 - 0.13
50/60
H: High
37
3700, 4000
4000K, 5000K
390440-LED
120-277
0.42 - 0.18
50/60
390440-LED
120-277
0.48 - 0.21
50/60
L: Low
50
5600, 5800
4000K, 5000K
S: Standard
58
6400, 6600
4000K, 5000K
390440-LED
120-277
0.62 - 0.28
50/60
H: High
74
7400, 8000
4000K, 5000K
390460-LED
120-277
0.63 - 0.27
50/60
L: Low
75
8400, 8700
4000K, 5000K
390460-LED
120-277
0.73 - 0.32
50/60
S: Standard
87
9600, 9900
4000K, 5000K
390460-LED
120-277
0.93 - 0.40
50/60
H: High
111
11100, 12000
4000K, 5000K
Fixture Dimensions
21
/4”
C D
Type
Model
4 Ft. 2 Lamp
4 Ft. 4 Lamp
4 Ft. 6 Lamp
Mounting Dimensions
A
B
C
D
E
F
390420
9 1/2”
13”
50”
51 7/8”
10 3/4”
7”
390440
14 1/2”
18”
50”
51 7/8”
15 3/4”
12”
390460
19 1/2”
23”
50”
51 7/8”
20 3/4”
17”
A
*
B
* 1/2" NPT
Hub Location
Note: light fixture’s glass frame extends 3/8”
into booth when mounted in booth panel.
4 FOOT SLIM LIGHT LED
50 1/4”
1 1/8”
E
16”
16”
16”
5/16” TYP
1/2” TYP
50 7/8”
1 7/8”
Ø 5/16” DIA.
12 Holes
F
1 7/8”
1-800-854-0021
www.ldpi-inc.com
19
HAZARDOUS
Chemical Processing ● Industrial ● Oil / Gas ● Shipyards / Marine ● Water Treatment
INFORMATION
LED
LE401
The LE401 Series is an energy efficient alternative to hazardous location metal halide
and high pressure sodium HID fixtures. This copper-free, cast aluminum fixture is
designed for indoor and outdoor applications including: hazardous, marine, high bay,
low bay, and flood applications. This fixture incorporates 24 high power LED’s with
multiple optical distribution patterns and comes standard with a CCT of 5000K.
APPLICATIONS
Cold Storage
Grain Processing
Offshore Platforms
Power Plants
Refineries
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
CIII
PART ORDER MATRIX
Example: LE401-P11-V1-F3-M-C
SERIES
SOURCE
VOLTAGE
LE401
P11: 107W* (11000Lm)
P8: 82W* (9000Lm)
P5: 55W* (6400Lm)
*Nominal Watts
V1: 120-277V
V2: 277-480V, 55 Watt only
MOUNT
OPTICS
OPTIONS
F3: Pendant 3/4” Hub
F4: Yoke Mount 1/2” Hub
X1: Wall Mount 1” Hub
X3: Angled Stanchion 1 1/4” Threaded
X5: Angled Stanchion 1 1/2” Threaded
T1: Type I
T2: Type II
T3: Type III
F: Type V Frosted*
N: Type V Narrow 16° FWHM*
M: Type V Medium 70° FWHM*
W: Type V Wide 120° FWHM*
C: 3 Ft. Cord with Blunt End (F4 mount only)
D: Dimming (0-10V dimming driver)
(Can not be ordered with a corded option)
G: Lens Guard
4K: CCT of 4000K
7K: CCT of 7000K
PB: Black Powder Coat Finish
PW: White Powder Coat Finish
PG: Gray Powder Coat Finish
(BLANK): Natural Unpainted Finish
Notes:
*Optic Types F, N, M and W are available for the Type V optics only.
12”
5 3/4"
12”
4"
Ø 3/8" X 5/8" SLOT
2"
Ø 9/16"
5/8"
12”
12”
4 3/4"
Ø3/8"
TYP
6 3/16"
3/4" NPT
5 1/8"
5 1/8"
1/2" & 3/4" NPT (2 PLCS)
F1 & F2 MOUNT
1” NPT 2 PLCS
(X1 MOUNT)
3 1/4"
7 9/16"
1.25” or 1.5” NPT
STRAIGHT OR ANGLED at 25°
X2-X5 MOUNT
20
1-800-854-0021
www.ldpi-inc.com
2 7/16"
Ø 13/32"
TYP
HAZARDOUS
INFORMATION
LEHL
The LEHL LED Series is designed to be an energy efficient solution to conventional
hazardous location light fixtures. Multiple mounting options allow this fixture to
illuminate different areas.
CONSTRUCTION
Cast Aluminum Powder Coated Housing
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
UL1598 Wet/Damp
IP66
PART ORDER MATRIX
LED
APPLICATIONS
Cold Storage
Grain Processing
Power Plants
Refineries
Example: LEHL-170-U-50-CWS
SERIES
POWER*
VOLTAGE
CCT
HOUSING
LEHL
80: 80W (8400Lm)
110: 110W (11550Lm)
140: 140W (14000Lm)
170: 170W (17000Lm)
*Nominal Lumens at 5000K.
See website for other configurations.
U: 120-277V, 50/60Hz
H: 347-480V, 50/60Hz
50: 5000K
CWS: Ceiling/Wall/Stanchion*
PSC: Pendant/Swivel/Clamp
(3/4” NPT)**
* CWS Housing Mount Options - Ordered Separately, Field Installed.
Housing
Item #
CWS
HLC: Ceiling Box
8.9”
HLW4: Wall Mount 40°
14.0”
14.2”
HLW9: Wall Mount 90°
9.8”
HLS92: Stanchion 90° 1-1/2"
14.0”
12.9”
9.5”
** PSC Housing Mounting Accessories - Ordered Separately, Field Installed.
Housing
Item #
PSC
HLSW: Swivel/Clamp(Yoke)
14.6”
16.5”
3.9”
3.9”
9.5”
15.7”
1-800-854-0021
www.ldpi-inc.com
21
HAZARDOUS
Chemical Processing ● Industrial ● Oil / Gas ● Water Treatment
INFORMATION
LED
H LED
LED hazardous duty area lighting fixtures are constructed and tested to function in
adverse environments. Rely on LDPI to safely illuminate your work area even under
the harshest conditions.
CONSTRUCTION
Cast Aluminum Copper Free Housing, Power Coat
Finish, and Corrosion Resistant Hardware
LISTINGS
CI D2 Grps A,B,C,D
CII D1 Grps E,F,G and CII D2 Grps E,F,G
CIII
NEMA 4X
Example: DL-0-10-E-UN-0-R5-C-P2
PART ORDER MATRIX
SERIES
LUMENS
DRIVER
VOLTAGE
DRIVER
DL-0: H LED
05: 45W (5800Lm)
07: 58W (7100Lm)
10: 88W (10100Lm)
15: 122W (15600Lm)
17: 131W (17800Lm)
20: 166W (20400Lm)
E: Electronic LED Driver
UN: Universal 120 to 277V, 50/60Hz
(Voltage includes 208V, 220V, 240V etc.)
0: Standard Housing
S: Standard Housing
with stainless-steel insert
UN2: Universal 347/480V, 50/60Hz
(Not available for DL017 and DL020)
OPTICS
GUARD
MOUNT
TG: Thermal Shock-Resistant Glass Globe
R1: Type I Glass Refractor Globe
R3: Type III Glass Refractor Globe
R5: Type V Glass Refractor Globe
Blank: No Guard
C: Cast Aluminum Guard
L: Polymeric Guard
A2: 3/4” Cone Top Pendant
A3: 1” Cone Top Pendant
B2: 3/4” Wall Mount
B3: 1” Wall Mount
C2: 3/4” Ceiling Mount
C3: 1” Ceiling Mount
HV1: HazVertor™ Ring - CI, D2
HV2: HazVertor™ Ring - CII, D1
L4: 1 1/4” Straight Stanchion
P2: 3/4” Pendant Mount
P3: 1” Pendant Mount
S4: 1 1/4” 25° Angle Stanchion
Blank: No mount (To replace existing fixture)
UNIPAK
SPECIAL OPTIONS
LIGHT DISTRIBUTION OPTIONS
EU: USA Label
T: HazCote® Custom
Anti-corrosion Coating
(Consult factory)
G: Grey color option
I3: Interior Reflector 35° Beam Angle*
(*): DL005, DL007, DL010 only
13 3/8"
14 7/8"
13 3/8"
18 11/32"
CONE PENDANT
22
APPLICATIONS
Cold Storage
Grain Processing
Power Plants
Refineries
16 3/4"
14 1/2"
CEILING PENDANT
WALL MOUNT
1-800-854-0021
www.ldpi-inc.com
15 3/4"
16 1/8"
15 3/16"
25° STANCHION MOUNT
13 3/8"
14 3/4"
15 3/16"
STRAIGHT STANCHION
HAZVERTOR™ RINGER
EXPLOSION PROOF
INFORMATION
380 LED
The 380 LED Series is a must for any explosive atmosphere location! This product has
five different hub entries at each end, enabling the installer to wire the fixture at more
desirable angles. Center ballast placement provides a more balanced fixture for ease
of installation and weight distribution. The 380 LED Series is available in 4’ length for
2, 3, & 4 lamp combinations. LED lamps included.
CONSTRUCTION
Glass Borosilicate Tube Lens
APPLICATIONS
Coal Storage
Drilling Rigs
Grain Processing
Refineries
LISTINGS
CI D1 Grps C,D and CI D2 Grps A,B,C,D
CIII
CI and CII Simultaneous Presence
PART ORDER MATRIX
LED
Chemical Processing ● Grain Processing ● Metals & Mining ● Oil / Gas ● Water Treatment
Example: 380-LED-S5-4L-4-UNV1-P
SERIES
SOURCE
CCT
LAMP QTY
380 LED
4: 4000K
5: 5000K
2L: 2 Lamps
3L: 3 Lamps
4L: 4 Lamps
LENGTH
VOLTAGE
OPTIONS
4: 4 Ft.
347: 347V
UNV1: 120-277V
P: Polycarbonate Shield
WG: Stainless Steel Guard
Operating Temperature codes Based on 40° C Ambient
Fixture
Class I, D1
Groups C & D
Class I, D2
Groups A, B, C & D
Class II, D1
Groups E, F & G
Class II, D2
Groups E, F & G
Class III
Class I and II
Simultaneous Presence
380 LED
T6=85°C
T6=85°C
T4=135°C
T4=135°C
T4=135°C
T4=135°C
Lamp
Qty.
Source
(Ballast Factor)
Average
System Watts
Initial
Lumen Output
Color Temperature
(CCT)
2 Lamp
S: Standard
H: High
29
37
3200, 3300
3700, 4000
4000K, 5000K
4000K, 5000K
3 Lamp
S: Standard
H: High
43.5
55.5
4800, 4950
5550, 6000
4000K, 5000K
4000K, 5000K
4 Lamp
S: Standard
H: High
58
74
6400, 6600
7400, 8000
4000K, 5000K
4000K, 5000K
1-800-854-0021
www.ldpi-inc.com
23
EXPLOSION PROOF
LED
380 LED
Dimensions, Weights, and Mounting Options
2 Lamp
45° HUB
7 1/4”
STD
HUB
9”
45° HUB
7 1/4”
48 7/8”
Fixture Weight
Shipping Weight
2 Lamp
40 Lbs.
43 Lbs.
3 Lamp
45 Lbs.
52 Lbs.
4 Lamp
80 Lbs.
84 Lbs.
90° HUB
53 5/8”
3 Lamp
Mounting Options
Ordered Separately
Item #
Description
Wall/Ceiling Kit
4401
For 2 or 3 Lamp
Wall/Ceiling Kit
4400
For 4 Lamp
(Must be factory installed)
Drop Mount Kit
4405
2 or 3 Lamp
4403
4 Lamp
7 1/4”
45° HUB
STD
HUB
13”
45° HUB
7 1/4”
48 7/8”
90° HUB
53 5/8”
4 Lamp
45° HUB
7 1/4”
18 3/4”
STD
HUB
45° HUB
7 1/4”
48 7/8”
90° HUB
53 5/8”
Options
Item #
WG: Stainless Steel Guards
(Not for use in paint spray applications)
4211
2 Lamp 4 Ft.
4557
3 Lamp 4 Ft.
4211, (2) required
4 Lamp 4 Ft.
P: Polycarbonate Shields
(+/- 1/16” thickness)
24
Description
4209
2 Lamp 4 Ft.
4497
3 Lamp 4 Ft.
4209, (2) required
4 Lamp 4 Ft.
1-800-854-0021
www.ldpi-inc.com
FLUORESCENT
LIGHTING
FLUORESCENT CONTENTS
Class I
D1
Class I
D2
Corrosion
Resistant
Paint
Spray
General
Industrial
Page #
222
•
27
229H
•
28
236
•
29
INS2
•
30
SERIES
Class II
Class III
Marine◊
Wet
Damp
Damp
Only
INS3
240 8 Ft.
376
•
379i
•
384
•
240
•
•
241
•
•
#
•
○
•
•
31
•
•
32
•
•
33
•
•
34
•
•
35
•
•
36
•
37
•
•
260
•
•
•
•
38
261
•
•
•
•
38
280
•
•
•
•
39
281
•
•
•
•
39
400
•
•
•
40
•
41
400SLB
440 2x4
•
•
440 T/THO
•
•
•
•
Slim light
•
•
CFL
•
•
•
•
380
•
•
•
•
•
42
•
43
•
•
44
○
•
•
45
○
•
•
46
GENERAL
INFORMATION
222
The 222 series is ideal for industrial lighting needs. This series features 5 ft. 3-wire
whip that reduces installation time and tool-less access for ease of maintenance.
Fabricated from pre-painted cold rolled steel, the 222 Series is ideal for industrial
lighting needs. The 222 Series uses an optional 5 Ft. 3-wire whip which reduces
installation time. Available in T8, T8HO or T5HO lamps. LAMPS SOLD SEPARATELY.
CONSTRUCTION
Open Style (No Lens)
APPLICATIONS
General Lighting
Task Lighting
FLUORESCENT
LISTINGS
PART ORDER MATRIX
Example: 222-T5HO-2L-UNV1-EM
SERIES
LAMP TYPE
LAMP QUANTITY
LENGTH
222
T5HO: 54W
T8: 32W
T8HO: 44W*
2L: (4 or 8 Ft. Lamps)
3L: (4 Ft. Lamps)
4L: (4 Ft. Lamps T5 and T5HO only)
6L: (4 Ft. Lamps) (Tandom)**
8L: (4 Ft. Lamps T5 and T5HO only)**
4: 4 Ft.
8: 8 Ft.
VOLTAGE
OPTIONS
UNV1: 120-277V (T5HO and T8 only)
120: 120V
277: 277V
UNV2: 347-480V (T5HO only)
SL: Slots for Uplight
SR: Specular Reflector
NA: Narrow Angle Reflector
WA: Wide Angle Reflector
CM: Cable Mount (incl. 5 Ft. cable)
CH: Chain Hang Kit
Notes:
T8HO is only available in a 2 lamp configuration
6 lamp and 8 lamp configuration only available in 8 Ft. fixtures
5 11/16"
222-T5HO-2L-4-UNV1
LIGHT FIXTURE
1 13/16"
TOOL-LESS
ACCESS FASTENER
5 1/2"
222-T5HO-2L-4-UNV1
STANDARD BALLAST COVER
7 3/4"
(T5HO: 46”)
(T8/T8HO: 48")
3 1/2"
5 1/2"
Ø7/8" ELECTRICAL
KNOCK-OUT
222-T5HO-3L-4-UNV1-NA
NARROW ANGLE REFLECTOR
10"
Ø7/8" ELECTRICAL
KNOCK-OUT
BOTH ENDS
3 1/2"
5 1/2"
222-T5HO-4L-4-UNV1-WA
WIDE ANGLE REFLECTOR
1-800-854-0021
www.ldpi-inc.com
27
GENERAL
INFORMATION
FLUORESCENT
229H
Open Industrial fixture. Electronic Ballast. Even lamp spacing for optimum light
distribution. Pre-wired with 5 Ft. 3 wire whip for ease of wiring. Twist lock lamp holders.
A unique hinged ballast cover provides easy access to internal wiring and ballast for
installation or service without the need to remove lamps. Available in T8, T8HO, or
T5HO lamps. LAMPS SOLD SEPARATELY.
CONSTRUCTION
APPLICATIONS
General Lighting
Task Lighting
LISTINGS
Example: 229H-T5HO-4L-120-277-WG
SERIES
LAMP TYPE
LAMP QUANTITY
229H
T5HO: 54W
T8: 32W
T8HO: 44W
4L: 4 Lamp
3L: 3 Lamp
2L: 2 Lamp
VOLTAGE
OPTIONS
120-277: 120-277V (T5HO and T8 ONLY)
120: 120V
277: 277V
347-480: 347-480V (T5HO ONLY)
WG: Zinc Plated Wire Guard**
A: Pattern 12 Acrylic Diffuser***
PART ORDER MATRIX
Notes:
**Must be installed at the factory
***Diffuser is only available in 32W T8
14
”
1/2
WG: Zinc plated wire guard option
48 1/4” nominal
4”
Optional Mounting - Ordered Separately
PN: 3218 Chain hang kit
24” Chain piece (Qty. 2)
Chain hanger
bracket (Qty. 2)
Ballast plate is hinged
for easy access
28
Wire whip
not shown
1-800-854-0021
www.ldpi-inc.com
229H Light fixture
GENERAL
INFORMATION
236
This fixture features a steel white powder coat housing and sports either a white or
specular reflector system for the perfect lighting distribution for your application.
The fixture is available in a 2, 4, 6 or 8 lamp configuration, using T8 or T5HO lamps.
LAMPS SOLD SEPARATELY.
CONSTRUCTION
APPLICATIONS
General Lighting
Task Lighting
FLUORESCENT
LISTINGS
PART ORDER MATRIX
Example: 236-T8-6L-4-UNV1-WG
SERIES
LAMP TYPE
LAMP QUANTITY
LENGTH
236
T8: 32W
T8HLO: 32W
T5HO: 54W
2L: 2 Lamp
4L: 4 Lamp
6L: 6 Lamp
8L: 8 Lamp
4: 50” (Nominal)
VOLTAGE
OPTIONS
UNV1: 120-277V, 50/60Hz
120: 120V, 60Hz
277: 277V, 60Hz
UNV2: 347/480V, 50/60Hz - T5HO ONLY
CA5: Cable Mount 60” Nominal
CP6: 120: 6’ Cord, L5-15P
CP6: 277: 6’ Cord, L7-15P
HB: Specular Reflector
WG: Wire Guard (for complete kit see chart*)
OC: Occupancy Sensor (used with a program start ballast)
A: Acrylic Lens (for complete kit see chart**)
46 1/8”
120V Plug (L5-15P) or
277V Plug (L7-15P)
6 Ft. cord
Y-FIT
Toggled end
Fixing gripple
60” nominal
60° MAX
Occupancy
Sensor
5 1/2”
Wire Guard
Zinc plated
2L: 9 1/8”
4L: 16 3/8”
6L: 23 5/8”
8L: 30 7/8”
4 3/16”
6 Lamp shown
Model
3 5/8”
236-T5HO-2L
T8 and T8HO: 48 1/4”
T5HO: 46 1/4”
2L: 8 1/2”
4L: 15 3/4”
6L: 23”
8L: 30 1/4”
Wire Guard Kit*
Acrylic Lens Kit**
8182
8180
236-T8-2L
8183
8181
236-T5HO-4L
8178
8176
236-T8-4L
8179
8177
236-T5HO-6L
7238
8090
236-T8-6L
7060
8138
236-T5HO-8L
8186
8184
236-T8-8L
8187
8185
1-800-854-0021
www.ldpi-inc.com
29
Industrial
INFORMATION
FLUORESCENT
INS2
INS2 fixture is specifically designed for inspection and defect detection applications.
The proprietary refractor on the INS2 fixture creates distinct luminance edges on
painted surfaces which significantly increases the visibility of topographic defects. This
fixture is available in multiple lengths and can be installed as a stand-alone unit or in a
continuous row up to 16’ long. It features end caps with an integrated channel on the
backside of the housing to allow for surface, pendant, cable or various other mounting
options. Lamps included.
CONSTRUCTION
Aluminum 6063 T6 Black Powder Coat Housing
Acrylic Lens
APPLICATIONS
Certification
Defect Inspection
Paint Inspection
Process Inspection
Validation
LISTINGS
PART ORDER MATRIX
Example: INS2-T8-1L-4-UNV1-PB-CP6
SERIES
LAMP TYPE
LAMP QUANTITY
VOLTAGE
LENGTH
INS2
T8: 17W (2 Ft.)
32W (4 Ft.)
59W (8 Ft.)
1L: 1 Lamp
2L: 2 Lamp
3L: 3 Lamp
4L: 4 Lamp
120: 120V
277: 277V
UNV1: 120/277V
347: 347V
2: 2 Ft.
4: 4 Ft.
8: 8 Ft.
12: 12 Ft.
16: 16 Ft.
FINISH
CORD/PLUG
C6: 6 Ft. Cord no Plug
CP6: 6 Ft. Cord with Plug
Available Lamp Configurations
Nominal Fixture Length
Notes:
UNV1 (Universal voltage) is standard on fixtures without cords.
When ordering fixture with a cord (CP6) specify the voltage accordingly.
Standard plug is a NEMA rated straight blade.
QTY of Lamps
Nominal Lamp Length
2 Ft.
1
24 in.
4 Ft.
1
48 in.
8 Ft.
1
96 in.
8 Ft.
2
48 in.
12 Ft.
3
48 in.
16 Ft.
2
96 in.
16 Ft.
4
48 in.
26 5/16"
26 5/16"
25 1/8"25 1/8"
4 11/16"
4 11/16"
2 Ft. Fixture
5 17/32"
5 17/32"
5/16"-18
CARRIAGE
5/16"-18
CARRIAGE
SCREW
MOUNTING
TRACKTRACK
SCREW
MOUNTING
MOUNTING CHANNEL
50 5/16"
49 1/8"
4 Ft. Fixture
END CAP
5 17/32"
OPEN END
98 5/16"
97 1/8"
INS2 Inspection tunnel.
30
5 17/32"
1-800-854-0021
www.ldpi-inc.com
8 Ft. Fixture
CORD END
INFORMATION
INS3
The INS3 Series is a must have when the finish of any surface counts! This inspection
fixture is designed to create a well defined lamp image using light and dark contrasts
that cause defects in the paint to show for ease of defect detection and repair. This
fixture is available as a 2’, 4’ or 8’ fixture and is available in a 1, 2, or 3 lamp option.
Lamps included.
CONSTRUCTION
20 Gauge Steel Powder Coated Housing
Acrylic, Polycarbonate or Tempered Glass Lens
LISTINGS
PART ORDER MATRIX
APPLICATIONS
Certification
Defect Inspection
Paint Inspection
Process Inspection
Validation
FLUORESCENT
Industrial
Example: INS3-T8-3L-4-V1-D1-C6-CG-WO-5-W
SERIES
LAMP TYPE
LAMP QUANTITY
LENGTH
VOLTAGE
DIMMING*
INS3
T8: 17W (2 Ft.)
32W (4 Ft.)
59W (8 Ft.)
1L: 1 Lamp
2L: 2 Lamp
3L: 3 Lamp
2: 2 Ft.
4: 4 Ft.
8: 8 Ft.
V1: 120-277V
12: 120V
27: 277V
34: 347V
D1: 0-10V
D2: DALI
CORD
LENS
REFLECTOR
LAMP**
FINISH
C6: 6 Ft. Cord no Plug
CP: 6 Ft. Cord with Twist Lock Plug
(Specify voltage 120, 277 or 347)
GC: Clear Glass
GS: Clear Glass with Stripes
AC: Clear Acrylic
AS: Clear Acrylic with Stripes
PC: Clear Polycarbonate
PS: Clear Polycarbonate with Stripes
NL: No Lens
SR: Specular
WO: Diffuse White
WR: White
3: 3500K
4: 4100K
5: 5000K
6: 6500K***
W: White Powder Coat
B: Black Powder Coat
Contact Factory for Custom
Color
Notes:
* 4 Ft. Fixture Only
** Specify three digit code for lamps. Example: For a 3-lamp fixture with two 5000K lamps
in the outside positions and a 3500K lamp in the center position the code would be “535”.
*** 2 Ft. and 4 Ft. Lamps Only
POWDER COAT
HINGE
Dimensions
TYPE
A
B
C
2 Ft. 1 L
26"
9 7/8"
23 3/4"
2 Ft. 2 L
26"
17 7/16"
23 3/4"
2 Ft. 3 L
26"
25"
23 3/4"
4 Ft. 1 L
50"
9 7/8"
47 3/4"
4 Ft. 2 L
50"
17 7/16"
47 3/4"
4 Ft. 3 L
50"
25"
47 3/4"
8 Ft. 1 L
96"
9 7/8"
70"
8 Ft. 2 L
96"
17 7/16"
70"
8 Ft. 3 L
96"
25"
70"
B
A
3 1/8"
MOUNTING HOLES
Ø 3/8-16 UNC NUT RIVETS
4 PLCS
C
MOUNTING
5/8"
1-800-854-0021
www.ldpi-inc.com
31
WET / DAMP
Food & Beverage Processing ● Industrial ● Pulp & Paper
INFORMATION
FLUORESCENT
240 8 Ft.
The 240 8 Ft. Series is a very versatile fixture for industrial applications, wet locations
and task lighting. Optional adjustable mounting brackets allow for precise aiming in
multiple angles suitable for most applications. The 240 8 Ft. Series is available in 2, 3,
4, 5, 6, 8, 10 and 12 lamp options, all using a 3/16” tempered glass lens with acrylic
and polycarbonate optional lenses. With multiple hub locations, the 240 8 Ft. Series
can meet most of your wiring needs. LAMPS SOLD SEPARATELY.
CONSTRUCTION
Tempered Glass Lens
LISTINGS
UL1598 Wet/Damp
APPLICATIONS
General Lighting
Machining Areas
Prep Areas
Tunnels
Wash Down Areas
PART ORDER MATRIX
Example: 240-T8-4L-8-UNV1-TS-AM
SERIES
LAMP TYPE
LAMP QUANTITY
LENGTH
VOLTAGE
HUB
240
T5: (4’) 28W
T5HO: (4’) 54W
T8: (4’) 32W, (8’) 59W
T8HO: (4’) 44W, (8’) 86W
2L: 2 Lamp
3L: 3 Lamp
4L: 4 Lamp
5L: 5 Lamp
6L: 6 Lamp
8L: 8 Lamp**
10L: 10 Lamp**
12L: 12 Lamp**
8: 8 Ft.
347: 347V
UNV1: 120-277V
UNV2: 347-480V***
TS: Top and Side Hubs†
OPTIONS
AM: Adjustable Angle Mounting Brackets (PN: 9349)♦
CB: Cable Mount (PN: 6875) Includes 5 ft. Cables Std.
WH: 8’ Wire Whip
SR: Specular High Bay Reflector
W: Wire Guard
F: Fuse
A: Acrylic Lens
8HLO: High Light Output Ballast (T8 32W Lamp Only)
8FTL: 8 Ft. Lamp****
Notes:
** 4’ lamps only
*** UNV2 T5HO Only
**** Fixture comes equipped with 4 Ft. lamps. Select 8FTL for optional 8 Ft. Lamps
† 1/2” NPT standard
♦ For horizontal or ceiling mounted fixture only
1/2 NPT HUBS
1/2 NPT HUBS
INTEGRATED ACCESS DOOR HINGE
A
101 3/8”
103”
5 1/8”
32
1-800-854-0021
www.ldpi-inc.com
HINGED
REFLECTOR
A
2 LAMP: 12 3/16"
3 & 4 LAMP: 16 3/16"
5 & 6 LAMP: 20 11/16"
WET / DAMP
INFORMATION
376
Suitable for interior or exterior applications. A lightweight, vapor tight, nonmetallic
fixture ideal for corrosive or wet/damp environments. The 376 fixture features a
fiberglass housing with an acrylic or polycarbonate lens, a continuous gasket design,
along with an optional aluminum reflector available upon request. The 376 is ideal
for commercial industrial or institutional applications providing maximum light output
where humidity, dust, or fumes are possible. The 376 is resilient against corrosion and
weathering. LAMPS SOLD SEPARATELY.
CONSTRUCTION
LISTINGS
UL1598 Wet/Damp
UL1598A Marine Inside
NSF: Splash Zone Non-Food Prep
NEMA 4X
IP65
PART ORDER MATRIX
APPLICATIONS
Machining Areas
Prep Areas
Tunnels
Wash Down Areas
Example: 376-T8-3L-4-UNV1-A-EM
SERIES
LAMP TYPE
LAMP QUANTITY
LENGTH
VOLTAGE
376
T5: 14W, 28W*
T5HO: 24W, 54W
T8: 17W, 32W, 59W*
T8HO: 86W* (8’ fixture only)
1L: 1 Lamp (4’ only)
2L: 2 Lamp
3L: 3 Lamp (T5 and T8 only)
4L: 4 Lamp (8’ only)
6L: 6 Lamp (8’ T5 and T8 only)
2: 2 Ft.
4: 4 Ft.
8: 8 Ft.
UNV: 120-277W 50/60Hz
120: 120V
277: 277V
347: 347V
LENS
OPTIONS
PR: Polycarbonate Ribbed Lens (2’ and 4’ only)
A: Acrylic Ribbed Lens (4’ 2 or 3 Lamp and 8’ only)
AC: Acrylic Optically Clear Lens (4’ 2 or 3 lamp and 8’ only)
FA: Frosted Acrylic Lens (4’ 2 or 3 lamp and 8’ only) (Not NSF listed)
HB: Enhanced Alum. Refl. 0.30” => 93% reflective
WD: Wide distribution enhanced aluminum reflector
(Used with AC lens ONLY) (4’ 2 lamp fixture,
8’ fixture with (2) 8’ lamps or 8’ fixture with (4) 4’ lamps only)
Notes:
* IP 65 for MAX (2) 32 W lamps 4 Ft. housing and (4) 32 W lamps 8 Ft. Housing.
IP 55 for all models 2 Ft., 4 Ft., and 8 Ft
IP 67 for all 4 Ft. 2 lamp fixtures
LDPI, Inc. stocks multiple configurations. Consult factory.
For chemical resistance information please see website.
Narrow 1 lamp
Optional Mounting Ordered Separately
45° Mounting bracket kit
(8’ fixture requires 2 kits)
Chain hung Mounting bracket bail kit
(8’ fixture requires 2 kits)
P/N 5151: 1 lamp housing
P/N 5192: Narrow housing
P/N 5102: 2 or 3 lamp housing
P/N 5193: Standard housing
A
Diffuser/Lens depth: 2.13”
AC and FA lens depth: 3.5”
B
C
D
Standard 2+ lamps
B
C
D
AC and FA acrylic lens
5.75”
FLUORESCENT
Fixture Dimensions
Part #
376 Shipping Dimensions
A
B
C
D
Product
Weight
Volume
LWH
376-__-1L-4-UNV-__
51.75”
4.25”
4.00”
4.56”
376-__-1L-5-UNV-__
63.50”
4.25”
4.00”
4.56”
376-1L-4
8#
1.09 Cu. Ft.
59” L 8” W 4” H
376-1L-5
10#
1.29 Cu. Ft.
70” L 8” W 4” H
376-__-2L-2-UNV-__
27.25”
4.25”
6.75”
7.33”
376-2L-2
376-__-3L-2-UNV-__
27.25”
4.25”
6.75”
7.33”
376-2L-4
6#
.66 Cu. Ft.
36” L 8” W 4” H
12#
1.09 Cu. Ft.
59” L 8” W 4” H
376-__-2L-4-UNV-__
51.75”
4.25”
6.75”
7.33”
376-2L-8
376-__-3L-4-UNV-__
51.75”
4.25”
6.75”
7.33”
376-3L-2
20#
2.47 Cu. Ft.
107” L 8” W 5” H
6#
.66 Cu. Ft.
36” L 8” W 4” H
376-__-2L-8-UNV-__
100”
4.25”
6.75”
7.33”
376-__-4L-8-UNV-__
100”
4.25”
6.75”
7.33”
376-3L-4
12#
1.09 Cu. Ft.
59” L 8” W 4” H
376-4L-8
21#
2.47 Cu. Ft.
107” L 8” W 5” H
376-__-6L-8-UNV-__
100”
4.25”
6.75”
7.33”
376-6L-8
23#
2.47 Cu. Ft.
107” L 8” W 5” H
“B” measurement: with Poly Molded diffuser.
Poly Ribbed diffuser will measure 0.12” shorter.
“B” measurement with Acrylic Optically Clear lens is 5.75”.
1-800-854-0021
www.ldpi-inc.com
33
WET / DAMP
INFORMATION
FLUORESCENT
379i
The 379i is a glass fiber reinforced product with injection molded lens options for
precise detail and strength. The lenses also have frosted ends, lineal prism sides
with frosted or optically clear face. All hardware is stainless steel with tamper
resistant latches. The gear tray hinges at both sides with tool-less latches for ease of
accessibility and maintenance. Fixtures come standard with plastic latches and zinc
plated mounting straps. Ask us about our customized performance reflector option.
CONSTRUCTION
LISTINGS
UL1598 Wet/Damp
NSF: Splash Zone Non-Food Prep
NEMA 4X
NSF @1500psi
IP67
40°C Ambient Rating
Example: 379i-T8-4L-4-UNV1-A-EM
APPLICATIONS
Machining Areas
Prep Areas
Tunnels
Wash Down Areas
PART ORDER MATRIX
SERIES
LAMP TYPE
LAMP QUANTITY
LENGTH
VOLTAGE
379i
T5: 28W
T8: 32W*
T8HO: 44W
T5HO: 54W*
3L: 3 Lamp
4L: 4 Lamp*
5L: 5 Lamp
6L: 6 Lamp*
4: 4 Ft.
UNV1: 120-277V, 50/60Hz*
120: 120V, 60Hz
277: 277V, 60Hz
UNV2: 347/480V, 50/60Hz - T5HO ONLY
LENS
OPTIONS
Diffuser Type:
A: Acrylic*
P: Polycarbonate
FA: Frosted Acrylic
HB: Enhanced Aluminum Reflector
EM: Emergency Backup
CM: Cable Mount (Cable not included)
TR: Tamper Resistant Latches
CR: Custom Performance Reflector System
RZ: Rigid Ceiling Mount (zinc plated)
RS: Rigid Ceiling Mount (stainless steel)
MS: Mounting Strap (stainless steel)
For use with cable or chain (not included)
Notes:
* Standard fixture configurations
Additional mounting configurations available consult factory.
8"
42"
12"
36"
6 3/16"
52"
14 9/16"
34
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS
INFORMATION
384
Meets all Coast Guard specifications. Streamlined design provides eye appeal and
ruggedness. Designed to withstand strong vibration. T4 (135° C) operating code.
Adjustable mounting brackets and lamps included. Straight in lamp holders.
ADJUSTABLE MOUNTING BRACKETS AND LAMPS INCLUDED.
CONSTRUCTION
Cast Aluminum Low Copper Content Housing
Acrylic Clear Lens
APPLICATIONS
Drilling Rigs
Offshore Platforms
FLUORESCENT
Oil / Gas ● Pulp & Paper ● Shipyards / Marine ● Water Treatment
LISTINGS
CI D2 Grps A,B,C,D
UL1598 Wet/Damp
PART ORDER MATRIX
Example: 384-T8-2L-4-UNV1-EM
SERIES
LAMP TYPE
LAMP QUANTITY
384
T5HO: 54W or 24W
T8: 17W or 32W
PL40: PL-L 40W CFL
2L: 2 lamps
LENGTH
VOLTAGE
OPTIONS
2: 2 Ft.
4: 4 Ft.
UNV1: Universal 120-277V
120: 120V
277: 277V
EM: Emergency Battery
Backup (4’ fixture only)
Notes:
Adjustable Mounting brackets and lamps included.
Multiple voltages available, consult factory
Mounting (Standard)
Dimensions: (Nominal)
A
Versatile Mounting arrangements, (360°).
Brackets come standard
C
D
B
3/8”
1 3/4”
384 Series Dimensions (Inches)
2”
4 5/8”
6”
Adjustable Mount Bracket Detail
A
B
C
D
Weight
Volume
4 Ft.
51.6
50.0
6.3
6.5
32#
1.55 Cu. Ft.
2 Ft.
26.0
26.0
6.3
6.5
23#
.78 Cu. Ft.
1-800-854-0021
www.ldpi-inc.com
35
HAZARDOUS
INFORMATION
FLUORESCENT
240
The 240 Series is a very versatile fixture for hazardous environments. It is an ideal
fixture for industrial applications, wet locations and task lighting. Optional adjustable
mounting brackets allow for precise aiming in multiple angles suitable for most
applications. The 240 Series is available in 2, 3, 4, 5 and 6 lamp options, all using
a 3/16” tempered glass lens with acrylic and polycarbonate optional lenses. With
multiple hub locations, the 240 Series can meet most of your wiring needs.
APPLICATIONS
Coal & Dust Storage
Machining
Paint & Powder Storage
Tunnels
CONSTRUCTION
Tempered Glass Lens
Multiple Hub locations
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
CIII
UL1598 Wet/Damp
IP65
55°C Ambient Rating (T8 32W)
Example: 240-T8-4L-UNV1-TS-AM
PART ORDER MATRIX
SERIES
LAMP TYPE
LAMP QUANTITY
VOLTAGE
HUB
240
T5: 28W
T5HO: 54W
T8: 32W
T8HO: 44W
2L: 2 Lamp
3L: 3 Lamp
4L: 4 Lamp
5L: 5 Lamp
6L: 6 Lamp
347: 347V
UNV1: 120-277V††
UNV2: 347-480V***
TS: Top and Side Hubs**
OPTIONS
AM: Adjustable Angle Mounting Brackets (PN: 6856)†
6856SS: AM Stainless Steel†
CB: Cable Mount (PN: 6875) Includes 5 ft. cables std.
6875SS: CB Stainless Steel. Includes 5 ft. cables std. (Consult Factory for availability)
WH: 8’ 3-Wire Whip
SR: Specular High Bay Reflector
W: Wire Guard
F: Fuse
A: Acrylic Lens
7979: Chain Mount Kit
EM: Emergency Battery Backup (Ambient reduced to 40°C)††
8HLO: High Light Output Ballast (T8 32W lamp only)
10357: Vertical Mounting Bracket
Notes:
** 1/2” NPT standard
*** UNV2 T5HO Only
†
For horizontal or ceiling mounted fixture only
††
EM available as UNV1 (120-277) only
1/2 NPT HUBS
1/2 NPT BOTH ENDS
BRACKETS FOR
OPTIONAL
MOUNTING KITS
HINGED REFLECTOR
INTEGRATED ACCESS
DOOR HINGE
A
HINGED
DOOR
FRAME
ROTARY
DRAW
LATCHES
51 1/2"
53 1/8"
5 5/16”
36
A:
2 LAMP: 12 3/16"
3 & 4 LAMP: 16 3/16"
5 & 6 LAMP: 20 11/16"
1-800-854-0021
www.ldpi-inc.com
Adjustable Mounting Brackets
for Surface Mounting
HAZARDOUS - BOOTH
INFORMATION
241
The 241 Series is an ideal product for a multitude of areas including Paint Spray
Booths, Prep Areas, Inspection Areas, Sanding or Machining Areas, even where Grain
or Coal Dust may be a concern. This 4 lamp 4’ fixture is available in wattages including
32, 44, 54, and 60 watts with a rear access piano hinged door for easy access to
lamps and ballast. Must be mounted hinge side up. LAMPS SOLD SEPARATELY.
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
PART ORDER MATRIX
APPLICATIONS
Coal & Dust Storage
Machining
Tunnels
FLUORESCENT
Industrial
Example: 390241-3546-EM
SERIES
MODEL #
DESCRIPTION
OPTIONS
241
390241-3546
390241347-3125
390241-6974
390241120-4157
390241277-3792
390241-4843
T8 32W, 4 Ft.
T8 32W, 4 Ft.
T8 32W HLO, 4 Ft.
T8 44W HO, 4 Ft.
T8 44W HO, 4 Ft.
T5 54W HO, 4 Ft.
EM: Emergency Battery Backup - T8
5901: 8 Ft. 3-Wire Whip
Notes:
Lamps ordered separately
Multiple voltages available, consult factory.
Dimensions (Nominal)
Optional Kit
Ordered Separately - Field Installed
4692
Install Kit
5-1/8”
53 1/8”
15 1/8”
14 1/2”
52 1/2”
1-800-854-0021
www.ldpi-inc.com
37
HAZARDOUS - BOOTH
Industrial
INFORMATION
FLUORESCENT
260-261
The 260 and 261 Series is a product designed specifically for Paint Spray Booths.
These 4 lamp 4’ fixtures are available in 32 watts. The 260 Series allows for both
Front and Rear access using a paint spray cutoff switch when the front door frame is
opened. The 261 Series is a rear access only fixture and does not require paint spray
cutoff. Must be mounted hinge side up. LAMPS SOLD SEPARATELY.
CONSTRUCTION
Tempered Glass Lens
260: Front and rear access
261: Rear access only
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
APPLICATIONS
Blast Booths
Example: 390260-3546-EM
SERIES
MODEL #
DESCRIPTION
OPTIONS
260
390260-3546
390260347-3125
390260-6747
T8 32W, 4 Ft.
T8 32W, 4 Ft.
T8 32W HLO, 4 Ft.
5901: 8 Ft. 3-wire whip (261)
5902: 8 Ft. 5-wire whip (260)
261
390261-3546
390261347-3125
390261-6747
T8 32W, 4 Ft.
T8 32W, 4 Ft.
T8 32W HLO, 4 Ft.
PART ORDER MATRIX
Notes:
Fixture dimensions are nominal. Cut-out dimensions are actual.
Optional Kit
1704
Panel Stiffener Mounting Kit
Rear Access Panel
Models 260 and 261
49
5 3/4”
1
6”
3/1
”
5
/4
31
7 5/8”
51 1/4”
12”
12”
HOLE DETAIL
CUT LIGHT HOLE
19 5/8” X 51 1/4”
3/8” TYP.
12”
7 5/8”
3 13/16”
19 5/8”
12”
3 13/16”
18 3/8”
21 3/4”
5/16” Dia.
12 Holes
260
261
38
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS - BOOTH
INFORMATION
280-281
The 280 and 281 Series is a product designed specifically for Paint Spray Booths.
With a wider fixture design these products will provide increased photometric output
and efficiencies. These 4 lamp 8’ fixtures are available in wattages including 59 and 86
watts. The 280 Series allows for both Front and Rear access using a paint spray cutoff
switch when either front door frame is opened. The 281 Series is a rear access only
fixture and does not require paint spray cutoff. Must be mounted hinge side up.
APPLICATIONS
Blast Booths
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
PART ORDER MATRIX
280: Front and rear access
FLUORESCENT
Industrial
281: Rear access only
Example: 390280-3281-EM
SERIES
MODEL #
DESCRIPTION
OPTIONS
280
390280-3281
390280-4854
T8 59W, 8 Ft.
T8 86W HO, 8 Ft.
5901: 8 Ft. 3-wire Whip (281)
281
390281-3281
390281-4854
T8 59W, 8 Ft.
T8 86W HO, 8Ft.
Notes:
Optional Kit
Panel Stiffener Mounting Kit
21 5/8”
99
6"
5/1
5 3/4"
18 3/8"
102
5 1/4"
6"
11/1
100 5/8”
7 5/8”
12”
12”
12”
13 3/8”
12”
12”
12”
7 5/8”
3 13/16”
280/281 FIXTURE HOLE DETAIL
3/8” TYP.
280
12”
19 5/8”
1728
3 13/16”
5/16” Dia. 12 Holes
281
1-800-854-0021
www.ldpi-inc.com
39
HAZARDOUS - BOOTH
Industrial
INFORMATION
FLUORESCENT
400
The 400 Series Rear Access product is an ideal paint spray booth product when a
rear access fixture is desired. This series now has a 2’ fixture as well as the 4’ fixture
cataloged. The 4’ fixture comes in 2, 4 & 6 lamp with the following lamp options: T8
32W, T8HO 44W, & T5HO 54W lamps. The 2’ - 3 lamp fixture uses (3) T8 17W lamps.
APPLICATIONS
Clean Rooms
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
NFPA 33
PART ORDER MATRIX
Example: 390421-3546-EM
SERIES
MODEL #
DESCRIPTION
OPTIONS
400
390231-3546
390421-3613
390421347-3276
390421-6975
390421-3265
390421-5420 (347V - 480V)
390441-3W-3546
390441347-3125
390441-6974
390441-4843
390441-5421 (347V - 480V)
390461-3546
390461347-3125
390461-7059
390461-3265
390461-5420 (347V - 480V)
3 Lamp T8 17W, 2 Ft.
2 Lamp T8 32W HLO, 4 Ft.
2 Lamp T5 54W HO, 4 Ft.
5901: 8 Ft. 3-Wire Whip
Notes:
Multiple voltages available, consult factory.
12”
1 7/16”
5/16”
TYP
E
26 7/8”
HOLE DETAIL
(2 FT. 390231)
12”
Fixture Dimensions
1/2” TYP
1 7/8”
Ø 5/16” DIA.
10 Holes
Mounting Dimensions
Model
A
B
C
D
E
F
390231
10 1/2”
12 1/2”
26”
28 3/8”
11 3/4”
8”
390421
10 1/2”
12 1/2”
50 1/4”
52 3/8”
10 3/4”
7”
390441
15 1/2”
17 1/2”
50 1/4”
52 3/8”
15 3/4”
12”
390461
20 1/2”
22 1/2”
50 1/4”
52 3/8”
20 3/4”
17”
F
10 3/4”
3 1/2”
26 1/4”
C
D
50 1/4”
1 1/8”
E
16”
5/16” TYP
16”
16”
1/2” TYP
50 7/8”
40
1-800-854-0021
www.ldpi-inc.com
1 7/8”
Ø 5/16” DIA.
12 Holes
F
A
B
1 7/8”
HAZARDOUS - BOOTH
INFORMATION
400SLB
The 400SLB Series Inside Access fixture features a 20 gauge powder coated, shallow
steel housing that is 2” deep. This 4 Ft. fixture is available as a 4 or 6 lamp fixture with
T8 and T5HO lamping options. This series provides front door fixture access with a
completely removable lens assembly and comes with a paint spray cutoff switch.
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
PART ORDER MATRIX
APPLICATIONS
Blast Booths
FLUORESCENT
Industrial
Example: 400SLB-T8-4L-UNV1-PC-PB
SERIES
LAMP TYPE
LAMP QUANTITY
400SLB
T5HO: 54W
T8: 32W
4L: 4 Lamps
6L: 6 Lamps
VOLTAGE
FINISH
REFLECTOR
UNV1: 120-277V
UNV2: 347-480V (T5HO only)
PC: Powder Coated Steel
SS: Stainless Steel Powder Coated White
AS: Aluminized Steel
PR: White Powder Coat
HB: High Brightness Reflector
7/8” TYP
13 3/4”
(4 LAMP)
18 3/4”
(6 LAMP)
17 3/4”
(4 LAMP)
22 3/4”
(6 LAMP)
1/2” CONDUIT HUB
54”
5/8”
2”
1/2”
50”
7/8” TYP
2”
16”
52”
16”
16”
2”
2 7/16”
15 3/4”
(4 LAMP)
HOLE DETAIL
(4 LAMP AND 6 LAMP FIXTURES)
20 3/4”
(6 LAMP)
12”
(4 LAMP)
17”
(6 LAMP)
Ø 5/16” 12 PLCS
2 7/16”
9/16” TYP
9/16” TYP
53 1/8”
1-800-854-0021
www.ldpi-inc.com
41
HAZARDOUS
Industrial ● Oil / Gas
INFORMATION
FLUORESCENT
440 2x4
The 440 2x4 Series is a slim 4 1/4” product that is suited for use in clean room
applications where a lay-in, recessed or surface mount troffer application is desired.
This series comes in a 4 lamp configuration of T8 32W lamps, and utilizes a specular
polished reflector system for increased light output. Lay-in fixture fits 2x4’ grids with up
to a 2” industrial “T-grid” suspension system. LAMPS SOLD SEPARATELY.
CONSTRUCTION
Tempered Prismatic Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
UL1598 Wet/Damp
APPLICATIONS
Clean Rooms
Drilling Rigs
PART ORDER MATRIX
Example: 3904402X4-T-L-PC-C-3546
SERIES
LAMP TYPE
MOUNT
3904402X4
T: T8 32W
L: Lay-in*
R: Recessed Flange/Box Panel (for use with kits 8363 and 3332)
S: Surface Mount (for use with kit 8362)
HOUSING
HUB
BALLAST
PP: PrePaint
PC: Powder Coat (Standard)
GS: Galvanized Steel
A, B, C or D
See Hub Locations
3546: T8
120-277V, 50/60Hz
Hub Locations
A, B, C, and D
will clear for Lay-in Mount
D
Notes:
* Lay-in Mount is standard, Other Mounting options ordered separately.
B
C
(Back of Fixture)
A
Lay-In Mount
Surface Mount
Independent support bracket shown.
Lay-in mount option only.
Standard
Kit P/N 8362
3 15/16"
3 15/16"
47 3/4"
4 1/4"
23 1/2"
23 1/2"
Box Panel Mount
P/N 3332
3 1/4"
2 1/4"
/2"
51 1
15"
23 1
15"
/2"
4 1/4"
25 1
/2"
42
/4"
47 3
15"
23 1/2"
5 1/4"
3 15/16"
3 15/16"
15"
5 1/4"
15"
4 1/4"
Recessed Flange
Mount: P/N 8363
3 1/4"
2 1/4"
2"
/4" 49 1/
/2"
51 1
47 3
/2"
49 1
4 1/4"
1-800-854-0021
www.ldpi-inc.com
1 3/8"
1 1/8"TYP
15"
15" 47 3/4"
4 1/4"
15"
23 1/2"
15"
4 1/4"
1 3/8"
HAZARDOUS - BOOTH
INFORMATION
440T/THO
The Series 440T / 440THO is a slim 2 1/4” product that is suited to being used in paint
spray booths (with recessed flange mount option) & clean room applications where a
lay-in troffer application is desired. This series comes in 4 lamp configurations of either
T5 28W or T5HO 54W lamp options. Both utilize a specular insert for increased light
output. Lamps not included. LAMPS SOLD SEPARATELY.
CONSTRUCTION
Tempered Prismatic Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
PART ORDER MATRIX
APPLICATIONS
Blast Booths
FLUORESCENT
Industrial
Example: 390440-T-L-PC-C-4425
SERIES
MOUNT
T: T5 28W
THO: T5HO 54W
L: Lay-in*
R: Recessed Flange/Box Panel (for use with kits 3331 and 3332)
S: Surface Mount (for use with kit 3330)
HOUSING
HUB
BALLAST
PP: PrePaint
PC: Powder Coat (Std)
GS: Galvanized Steel
Hub location
A, B, C or D
See Hub Locations
4425: T5 120-277V
3265: T5HO 120-277V
5420: T5HO 347-480V
HUB LOCATIONS A, B, and D not
recommended for Lay-in Mount
C: not for use with surface mount.
D
Notes:
* Lay-in Mount is standard, Other Mounting options ordered separately
B
C
(Back of Fixture
A
Lay-In Mount
Standard
Independent support bracket
shown. Lay-in mount option only.
Surface Mount
P/N 3330
2 1/4”
2 1/4”
23
47
”
1/2
”
1/2
47 1/2” ”
49 1 1/2
5
4 1/4”
1/2
15”
23 1/2”
”
Recessed Flange Mount:
P/N 3331
Box Panel Mount
P/N 3332
15”
4 1/4”
15”
15”
2 1/4”
2 1/4”
41
/4”
1
27 23 1/5”
1/2 2”
”
”
1/2 ”
47 9 1/2 /2”
4 11
5
41
/4”
1 1/4”
15”
4 1/4”
15”
23
1/2 15”
”
47
”
1/2
15”
4 1/4”
1-800-854-0021
www.ldpi-inc.com
43
HAZARDOUS - BOOTH
Industrial
INFORMATION
FLUORESCENT
Slim Light
The Slim Light Series features a low profile housing that is only 2 1/4” thick maximizing
the available space allowed for your paint spray booth. The Slim Light Series is
available in lengths of 3 & 4’ with 2, 4 or 6 lamp options. The 3’ fixtures are available
in T8 25 watts. The 4’ fixtures are available in 32 and 54 watts T5HO, T8 or T8HLO.
This series provides a hinged front access door with a paint spray cutoff switch when
opened. Must be mounted hinge side up when wall mounted.
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
APPLICATIONS
Blast Booths
PART ORDER MATRIX
Example: 390320-3613-EM
SERIES
MODEL #
DESCRIPTION
OPTIONS
Slim Light
3 Ft.
390320-3613
390320347-3276
390340-3546
390340347-3125
390360-3546
390360347-3125
T8 25W, 2 Lamp
T8 25W, 2 Lamp
T8 25W, 4 Lamp
T8 25W, 4 Lamp
T8 25W, 6 Lamp
T8 25W, 6 Lamp
(2 and 4 Lamp fix. only - 120 and 277V only)
Slim Light
4 Ft.
390420-3613
390420347-3276
390420-6975
390420-3265
390420-5420
390440-3546
390440-6747
390440-4843
390440-5421
T8 32W, 2 Lamp
T8 32W, 2 Lamp
T8 32W HLO, 2 Lamp
T5 54W HO, 2 Lamp
T5 54W HO, 2 Lamp
T8 32W, 4 Lamp
T8 32W HLO, 4 Lamp
T5 54W HO, 4 Lamp
T5 54W HO, 4 Lamp
(120 and 277V only)
EM: Emergency Battery Backup - T5HO
(Deeper Housing, 2 and 4 lamp fixtures, 120 and 277V only)
HSR: High Performance Specular Reflector
(440 T8 and T8HLO only)
HWR: High Performance White Reflector
(440 T8 and T8HLO only)
Slim Light
4 Ft. 6 Lamp
390460-3546
390460347-3125
390460-7059
390460-3265
390460-5420
T8 32W, 6 Lamp
T8 32W, 6 Lamp
T8 32W HLO, 6 Lamp
T5 54W HO, 6 Lamp
T5 54W HO, 6 Lamp
(120 and 277V only)
Fixture Dimensions
Wire whip
Mounting
Type
Model
A
B
C
D
E
F
3 Ft. 2 Lamp
390320
9 1/2”
13”
38”
39-7/8”
10 3/4”
7”
3 Ft. 4 Lamp
390340
14 1/2”
18”
38”
39-7/8”
15 3/4”
12”
3 Ft. 6 Lamp
390360
19 1/2”
23”
38”
39-7/8
20 3/4”
17”
4 Ft. 2 Lamp
390420
9 1/2”
13”
50”
51-7/8”
10 3/4”
7”
4 Ft. 4 Lamp
390440
14 1/2”
18”
50”
51-7/8”
15 3/4”
12”
4 Ft. 6 Lamp
390460
19 1/2”
23”
50”
51-7/8”
20 3/4”
17”
38 1/4”
3 1/8”
E
A
44
2 1/4”**
CD
*
*
B
1-800-854-0021
www.ldpi-inc.com
** (T5HO EM fixture
is 3 1/2" deep)
* HUB
LOCATIONS
16”
1 7/8”
5/16”
DIA. 10 F
Holes
3 FT. FIXTURE HOLE DETAIL
5/16” TYP
1/2” TYP
1 7/8”
38 7/8”
50 1/4”
Note: light fixture’s glass frame extends 3/8” into booth when mounted in booth panel.
1/2 NPT
CONDUIT HUB
T5HO ONLY
16”
1 1/8”
E
16”
4 FT. FIXTURE HOLE DETAIL
5/16” TYP
1/2” TYP
50 7/8”
1 7/8”
16”
16”
5/16” DIA.
12 Holes
1 7/8”
F
HAZARDOUS
INFORMATION
CFL
The CFL Series is a cast copper-free aluminum fluorescent fixture with a powder
coated finish rated for hazardous locations and adverse environments. The colored
globe options make this a positive visual marker for areas such as safety eye wash
locations, fire extinguishers, critical meters, controls and other safety needs.
CONSTRUCTION
Cast Aluminum Copper Free Powder Coated Gray
Housing and Glass Prismatic Globe Lens
LISTINGS
CI D2 Grps A,B,C,D
CII D2 Grps F,G
UL1598 Wet/Damp
NEMA 4X
IP66
PART ORDER MATRIX
APPLICATIONS
Chemical Plants
Drilling Rigs
Waste Water Treatment
Steel Mills
Off Shore Platforms
FLUORESCENT
Example: VFA-128-120-TGP-RD-U
SERIES
HUB
WATTS
VOLTAGE
VFA: Pendant Mount
VFH: Fixture Body for Ceiling, Wall or Stanchion Mount
VFHA: Stanchion Mount
VFHB: Wall Mount no Box
VFHBF: Wall Mount Std. Box
VFHF: Ceiling Mount Std. Box
1: 1/2” NPT Hub*
2: 3/4” NPT Hub
4: 1 1/4” NPT Hub**
13: 13W (One 13W Lamp)
26: 26W (Two 13W Lamps)
44: 44W (Two 22W Lamps)
120: 120V
GLOBE
REFLECTOR
PACKAGING
G: Clear Glass
GP: Clear Glass and Guard
TG: Tempered Glass
TGP: Tempered Glass and Guard
ACG: Amber Glass
BCG: Blue Glass
GCG: Green Glass
RCG: Red Glass
ACGP: Amber Glass and Guard
BCGP: Blue Glass and Guard
GCGP: Green Glass and Guard
RCGP: Red Glass and Guard
RD: Dome Reflector
RA: Angle Reflector
D: Unipak® Packaging
(Completely assembled in
one carton with lamp)
U: Unlamped
P: Lamped
Notes:
*VFH and VFHB - NO HUBS
** Stanchion mount only
Lamps available on request
VXB
Temperature Information
Ambient Temperature
Fixture
Wattage
Minimum
Maximum
Supply Wire
Temperature
13
0ºC (32ºF)
40ºC (104ºF)
22
-29ºC( -20ºF)
26
28
44
-29ºC (-20ºF)
VXA4
Class I, Division 2 T-Code
Globe,
Guard
Globe, Guard
And Reflector
110ºC
T3
T3
40ºC (104ºF)
110ºC
T3
T3
0ºC (32ºF)
40ºC (104ºF)
110ºC
T3
T3
-29ºC (-20ºF)
40ºC (104ºF)
110ºC
T3
T3
40ºC (104ºF)
110ºC
T3
T3
VR22
VXF
VFH
VFA
VGL22
VGL22
VGU22P
VGU22P
VRA22P
VR22
1-800-854-0021
www.ldpi-inc.com
VRA22P
45
EXPLOSION PROOF
INFORMATION
FLUORESCENT
380
The 380 Series is a must for any explosive atmosphere location! This product has
five different hub entries at each end, enabling the installer to wire the fixture at more
desirable angles. Center ballast placement provides a more balanced fixture for ease
of installation and weight distribution. The 380 Series is available in 2’ & 4’ lengths for
2, 3, & 4 lamp combinations in T5, T5HO, T8, T8HO. Lamps included.
APPLICATIONS
Coal Storage
Drilling Rigs
Grain Processing
Refineries
CONSTRUCTION
Glass Borosilicate Tubes Lens
LISTINGS
CI D1 Grps C,D and CI D2 Grps A,B,C,D
CIII
CI CII simultaneous Presence
PART ORDER MATRIX
Example: 380-T8-3L-4-UNV-EM
SERIES
LAMP TYPE
LAMP QUANTITY
LENGTH
VOLTAGE
OPTIONS
380
T5**
T5HO*†
T8*†
T8HO**
2L: 2 Lamp†
3L: 3 Lamp†
4L: 4 Lamp†
2: 2 Ft.
4: 4 Ft.†
UNV: Universal Voltage†
120-277V, 50/60Hz
347: 347V
(4 Ft. 2 lamp ONLY - UL Listed)
HB: 93% Reflective specular reflector insert
Notes:
*5000K lamp standard for T5HO and T8 lamps
**4100K lamp standard for T8HO and T5 lamps
All T5, T5HO, T8, and T8HO are universal voltage
**T8HO Lamp Type not available in 2 Ft. fixture.
*347 Volt only available in T5HO and T8.
3 and 4 Lamp fixtures not available in 2 Ft. length.
3 lamp fixtures not available in T5 or T8HO
† Normally stocked.
Consult factory for non-standard fixtures
Lamp Wattages
2 Ft.
Watts
4 Ft.
Watts
Class I, Div. 1 Groups C and D
T6 = 85°C
T5
14
T5
28
Class I, Div. 2 Groups A, B, C, D
T4 = 135°C
T5HO
24
T5HO
54
Class II, Div. 1 Groups E, F, G
T4 = 135°C
T8
17
T8
32
Class III
T4 = 135°C
T8HO
n/a
T8HO
44
Simultaneous Presence Class I and II
T4 = 135°C
Mounting Options
Item #
Description
Wall/Ceiling Kit
4401
For 2 or 3 Lamp
Wall/Ceiling Kit
4400
Operating Temperature Codes Based on 40°C Ambient
All Mounting Options and Accessories
are Ordered Separately
Accessories
Item #
Description
WG: Stainless Steel Guards
(Not for use in paint spray applications)
4466
2 Lamp 2 Ft.
4211
2 Lamp 4 Ft.
4557
3 Lamp 4 Ft.
4211, (2) required
4 Lamp 4 Ft.
4464
2 Lamp 2 Ft.
4209
2 Lamp 4 Ft.
4497
3 Lamp 4 Ft.
4209, (2) required
4 Lamp 4 Ft.
For 4 Lamp
(Must be factory installed)
P: Polycarbonate Shields
(+/- 1/16” thickness)
Drop Mount Kit
46
4405
2 or 3 Lamp
4403
4 Lamp
1-800-854-0021
www.ldpi-inc.com
EXPLOSION PROOF
380
DIMENSIONS (Nominal)
2L 2FT. Dimensions
45° HUB
STD
HUB
7 1/4”
9”
90° HUB
45° HUB
7 1/4”
24 7/8”
FLUORESCENT
29 5/8”
45° HUB
7 1/4”
STD
HUB
90° HUB
13”
90° HUB
90° HUB
45° HUB
7 1/4”
48 7/8”
9”
18 3/4”
2L 4FT. Dimensions
53 5/8”
3L 4FT. Dimensions
7 1/4”
45° HUB
STD
HUB
45° HUB
7 1/4”
48 7/8”
53 5/8”
4L 4FT. Dimensions
45° HUB
STD
HUB
45° HUB
7 1/4”
48 7/8”
7 1/4”
53 5/8”
1-800-854-0021
www.ldpi-inc.com
47
THIS PAGE INTENTIONALLY LEFT BLANK
HID
LIGHTING
HID CONTENTS
SERIES
Class I
D1
Class I
D2
Class II
Class III
Corrosion
Resistant
Paint
Spray
Marine◊
Wet
Damp
Damp
Only
General
Industrial
Page #
HID FL
•
•
○
•
•
51
HID H
•
•
•
•
○
•
•
52
•
•
•
•
○
•
•
53
HID XP
HID H2
•
•
•
○
•
•
54
HID XP2
•
•
•
○
•
•
55
HAZARDOUS
INFORMATION
HID FL
HID
Flood lights for use in hazardous and marine rated locations. This fixture has a die
cast housing and cover as well as a fully pivoting steel yoke. Outdoor wet locations.
Temperature range: 70W-400W (all) -30°C to 40°C, 1000W HPS -30°C to 40°C, and
1000W MH -30°C to 25°C.
CONSTRUCTION
Tempered Glass Lens
LISTINGS
CI D2 Grps A,B,C,D
NEMA 3R
PART ORDER MATRIX
APPLICATIONS
Chemical Plants
Drilling Rigs
Off Shore Platforms
Steel Mills
Example: FD-H-0-40-C-04-0-Y-N-E-BRZ
SERIES
LAMP
STARTER
WATTS
BALLAST
FD: HID Flood
S: High Pressure Sodium
H: Metal Halide
0: Standard Fixture (HPS)
10: 100W (HPS only)
15: 150W (HPS only)
17: 175W
20: 200W
25: 250W
40: 400W
00: 1000W
P: Reactor
H: High Reactance
C: Constant Wattage
Autotransformer
VOLTAGE
HOUSING
MOUNT
BEAM
04: 120/208/277/240V (wired 120)
12: 120V
20: 208V
24: 240V
27: 277V
48: 480V
0: Standard Housing (400W max.)
L: Large Housing (1000W)
Y: Yoke (trunnion)
N: Narrow Beam (6x6)
(400W max.)
UNIPAK
OPTIONS
D: Unipak with Diffuse Coated Lamp
E: Unipak with Clear Lamp
OF: Single Fuse
FF: Double Fuse
PW: Pre-wired 3 1/2” Cord
BRZ: Bronze Color
BLK: Black Color
(Contact factory for other available voltages)
DIMENSIONS (Nominal)
7”
17-3/5”
7”
23”
21 1/8”
20-1/2”
2”
12 1/2”
5 1/2”
19 1/2”
21-7/16”
1”
7/16”
13”
2”
25/32”
5-1/2”
23-71/6”
1-800-854-0021
www.ldpi-inc.com
51
HAZARDOUS
INFORMATION
HID H
HID
The H.I.D. H Series has a powder coat finish over a cast copper-free aluminum
housing designed for hazardous environments. Perfect for a multitude of applications
such as chemical plants, automobile manufacturing and marine and coastal facilities.
The H.I.D. H Series also has an assortment of options from reflector choices, auxiliary
quartz lamp and a 3-sided exit sign attachment.
APPLICATIONS
Chemical Plants
Drilling Rigs
Off Shore Platforms
Steel Mills
CONSTRUCTION
LISTINGS
CI D2 Grps A,B,C,D
CIII D1 and CIII D2
NEMA 4X
PART ORDER MATRIX
Example: D-HP-0-40-C-04-L-TG-P2-U
SERIES
LAMP
STARTER
WATTS
BALLAST
VOLTAGE
D: HID H
HP: Metal Halide
Starter Circuit/Quartz
0: Standard Fixture
Q: Quartz Auxiliary Option**
R: Instant Start
J: Auto Shutoff Starter
05: 50W
07: 70W
10: 100W
15: 150W
17: 175W
20: 200W
25: 250W
40: 400W
H: High Reactance (≤150W)
C: Constant Wattage
Autotransformer
03: 120/277V, 60Hz
04: 120/208/240/277V, 60Hz
09: 120/240/347V, 60Hz (CSA)
12: 120V, 60Hz
27: 277V, 60Hz
48: 480V, 60Hz
225: 220V, 50Hz
245: 240V, 50Hz
Pulse Start
(All ballast high power factor.)
HOUSING
OPTICAL
0: Standard Housing
(150W HPS, 250W MH max.)
R:Refractor Globe Housing
(150W HPS, 250W MH max.)
L: Large Housing
(200-400W HPS; 400W MH)
S:Standard Housing
with Stainless Steel Inserts
I: Refractor Globe Housing
M:Large Housing
For Std. Housing Fixtures
(5 1/2” Thread)
TG: Thermal Shock Resist. Globe
TGL: TG with Polymeric Guard
SG: Tuffskin® Coated Globe
SGL: SG with Polymeric Guard
R2: 12” Glass Refractor, Type II
R5: 12” Glass Refractor, Type V
R2G: R2 with Wire Guard
R5G: R5 with Wire Guard
For Refractor Globe Housing Fixtures
(7 3/4” Thread)
R1: 7 3/4” Refractor Globe, Type I
R3: 7 3/4” Refractor Globe, Type III
R5: 7 3/4” Refractor Globe, Type V
R1P: R1 with Polymeric Guard
TG: 7 3/4” Thermal Shock Res. Globe
TGP: TG with Polymeric Guard
For Large Housing Fixtures
(7 3/4” Thread)
TG: Thermal Shock Resist. Globe
TGC: TG with Cast Alum. Guard
SG: Tuffskin® Coated Globe
SGC: SG with Cast Alum. Guard
R2: 12” Glass Refractor, Type II
R5: 12” Glass Refractor, Type V
R2G: R2 with Steel Guard
R5G: R5 with Steel Guard
RCB: Enclosed High Bay Reflector
RCG: RCB with Steel Wire Guard
MOUNT
FINISH
UNIPAK
FUSING
CSA
A2: 3/4” Cone Top Pendant
A3: 1” Cone Top Pendant
B2: 3/4” Wall Mount
B3: 1” Wall Mount
C2: 3/4” Ceiling Mount
C3: 1” Ceiling Mount
F2: 3/4” Flexible Pendant
F3: 1” Flexible Pendant
HV1: HazVertor™ Ring - CI, D2
HV2: HazVertor™ Ring - CII, D1
P2: 3/4” Rigid Pendant
P3: 1” Rigid Mount
T: HazCote™ Custom
Corrosion Coating.
UNIPAK® Packaging
E: with Clear Lamp
D: with Dual Arc
Lamp
(HPS only)
U: Unlamped
F: Single Fuse
Block with Fuse
FF: Double Fuse
Block with Fuse
CSA Certification
C: CSA Nameplate
(Consult factory)
Optical Refractor Types
See Note for UNIPAK®
packaging options
WITH reflectors
Notes:
H fixture with the "0" ballast housing:
Standard reflector option (VR22P) use a "1" after UNIPAK® selection.
30° angle reflector (VRA22P) use a "2" after UNIPAK® selection.
H fixture with the "R" or "L" ballast housing:
Standard reflector option (VR31P) use a "1" after UNIPAK® selection.
30° angle reflector (VRA31P) use a "5" after UNIPAK® selection.
Deep dome reflector (VRD31) use a "6" after UNIPAK® selection.
For representational purposes only
52
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS
INFORMATION
HID H2
CONSTRUCTION
Glass Prismatic Globe Lens
LISTINGS
CI D2 Grps A,B,C,D
CIII D1 and CIII D2
NEMA 4X
IP66
PART ORDER MATRIX
HID
The H.I.D. H2 Series has a powder coat finish over a cast copper-free aluminum
housing designed for hazardous environments. The product is available in wattages of
35 - 150W and H.I.D. lamp choices of MH (metal halide), HPS (high pressure sodium
or incandescent. Perfect for a multitude of applications such as waste treatment
facilities, steel mills or offshore platforms. The H.I.D. H2 Series also has an
assortment of options from reflector choices to globes & guards.
APPLICATIONS
Chemical Plants
Drilling Rigs
Off Shore Platforms
Steel Mills
Example: D-HP-M-05-C-120-TGL-P2-U
SERIES
LAMP
HOLDER
WATTS
BALLAST
D: HID H2
HP: Metal Halide (100W max)
I: Incandescent
M: Medium Base Lamp holder
03: 35W
05: 50W
07: 70W
10: 100W
15: 150W (HPS only)
C: Constant Wattage
Autotransformer (CWA)
P: Reactor Type
0: Incandescent Lamp
No Ballast Circuit
VOLTAGE
OPTICAL
MOUNT
120: 120V
TG: Tempered Globe Only (VGL 15)
TGL: Tempered Globe and Polymeric Guard
TGC: Tempered Globe and Cast Guard
R1: Type I (long and narrow) Glass Refractor
R3: Type III (asymmetric) Glass Refractor
R5: Type V (symmetric) Glass Refractor
R1P: Type I Refractor and Polymeric Guard
R3P: Type III Refractor and Polymeric Guard
R5P: Type V Refractor and Polymeric Guard
R5A: 8” Glass Refractor (Type V)
GCG: Green Glass Globe
P2: 3/4” Rigid Pendant
P3: 1” Rigid Pendant
B2: 3/4” Wall
B3: 1” Wall
C2: 3/4” Ceiling
C3: 1” Ceiling
FINISH
UNIPAK
FUSING
T: HazCote™ Custom Corrosion
coating on all Aluminum parts
(consult factory)
U: Unlamped
F: Single Fuse Block with
Fuse (HID only)
See Notes for UNIPAK®
packaging options WITH
reflectors
Notes:
H2 fixture with:
Standard reflector option (VR15P)
use a “1” after UNIPAK® selection.
30° angle reflector (VRA15P)
use a “2” after UNIPAK® selection.
Optical Refractor Types
For representational purposes only
1-800-854-0021
www.ldpi-inc.com
53
EXPLOSION PROOF
INFORMATION
HID XP
HID
The H.I.D. XP Series has a powder coat finish over a cast copper-free aluminum
housing designed for explosive and hazardous environments. The product is available
in high pressure sodium (50 to 400 watts) and metal halide (70 to 400 watts). This
series is perfect for explosive and hazardous environments such as grain elevators,
petrochemical, paint spray and Marine environments. The H.I.D. XP Series also has
an assortment of options from Reflector choices, Auxiliary Quartz Lamp and a 3-sided
Exit Sign attachment.
CONSTRUCTION
LISTINGS
CI D1 Grps C,D
CII D1 Grps E,F,G
CII D2 Grps E,F,G
NEMA 4X
APPLICATIONS
Chemical Plants
Drilling Rigs
Petrochemical
PART ORDER MATRIX
Example: X-HP-25-C-040-G-P2-U
SERIES
LAMP*
STARTER
WATTS
BALLAST
X: HID XP
C: High Pressure Sodium
(ANSI S-56 lamp)
HP: Metal Halide - Pulse Start
(100w max in a paint area)
Quartz and Instant
Restart Options
0: Standard Fixture
Q: Fixture with Auxiliary
Quartz option
R: Fixture with Instant
Restart option
(70, 100 and 150 HPS only)
05: 50W
07: 70W
10: 100W
15: 150W
17: 175W
25: 250W
40: 400W
C: Constant Wattage
H: Reactance Type (≤ 150W)
VOLTAGE
GUARD
MOUNT
FINISH
UNIPAK
020: 480V with 120V Tap*
030: 120/277V
040: 120/208/240/277 Multi-tap
120: 120V
480: 480V
340: 347V
G: Cast Guard
Omit “G” if Guard not required
P2: 3/4” Pendant
P3: 1” Pendant
B2: 3/4” Wall
B3: 1” Wall
J2: 3/4” Bulkhead
J3: 1” Bulkhead
C2: 3/4” Ceiling
C3: 1” Ceiling
S4: 1 1/4” Stanchion
PS: UL listed fixture for
paint spray areas
(selected Wattages)
100W or less
T: HazCote™ Custom
Corrosion coating on
all aluminum parts
(consult factory for
lead time)
PST: UL listed for paint
spray areas with
HazCote™.
U: Unlamped
HP: Pulse Start - Leave Blank
reflectors.
Notes:
*HPS (high pressure sodium) (50 to 400 watts)
MH (metal halide) (70 to 400 watts)
XP fixture with Standard reflector option (VR31P) use a “4” after UNIPAK® selection.
XP fixture with 30° angle reflector (VRA31P) use a “5” after UNIPAK® selection.
XP fixture with Deep dome reflector (VRD31) use a “6” after UNIPAK® selection.
MOUNTING OPTIONS
Pendant
54
Ceiling
Stanchion
Wall/Bulkhead
1-800-854-0021
www.ldpi-inc.com
EXPLOSION PROOF
INFORMATION
HID XP2
CONSTRUCTION
LISTINGS
CI D1 Grps C,D
CII D1 Grps E,F,G
CII D2 Grps E,F,G
NEMA 4X
PART ORDER MATRIX
HID
The H.I.D. XP2 Series has a powder coat finish over a cast copper-free aluminum
housing designed for explosive and hazardous environments. The product is
available in H.I.D. lamp choice of HPS (high pressure sodium) (35 - 150 watts).
This series is perfect for explosive and hazardous environments such as grain
elevators, petrochemical plants, paint spray booths (100 watts max) and marine
environments. The H.I.D. XP2 Series also has an assortment of options from
Reflector choices to globes & guards.
APPLICATIONS
Chemical Plants
Drilling Rigs
Paint and Powder Booths - 100W Max.
Petrochemical
Example: X-S-M-07-P-120-G-P2-U
SERIES
LAMP
HOLDER
WATTS
BALLAST
X: HID XP2
M: Medium Base Lamp holder
03: 35W
05: 50W
07: 70W
75: 75W
10: 100W
15: 150W
C: Constant Wattage
P: Reactor Type (HPF)
(HPS Only)
VOLTAGE
GUARD
MOUNT
FINISH
UNIPAK
120: 120V
G: Cast Guard
Omit “G” if Guard
not required
P2: 3/4” Pendant
P3: 1” Pendant
B2: 3/4” Wall
B3: 1” Wall
J2: 3/4” Bulkhead
J3: 1” Bulkhead
C2: 3/4” Ceiling
C3: 1” Ceiling
PS: UL listed fixture for paint spray
areas (selected Wattages)
T: HazCote™ Custom Corrosion
coating on all Aluminum parts
(consult factory for lead time)
PST: UL listed for paint spray
areas with HazCote™.
U: Unlamped
(35W to 150W)
reflectors.
Notes:
XP2 fixture with Standard reflector option (VR15P) use a "4" after UNIPAK® selection.
XP2 fixture with 30° angle reflector (VRA15P) use a "5" after UNIPAK® selection.
COMPACT FLUORESCENT OPTION
Example: XFB-26-P-120-G-B2D
SERIES
LAMP
HOLDER
WATTS
BALLAST
VOLTAGE
X: HID XP2
F: Fluorescent
B: Bi-Pin/ PL lamp
09: 9W
13: 13W
18: 18W
26: 26W
P: Reactor Type (HPF)
120: 120V
GUARD
MOUNT
UNIPAK
G: Cast Guard
Omit “G” if Guard
not required
P2: 3/4” Pendant
P3: 1” Pendant
B2: 3/4” Wall
B3: 1” Wall
J2: 3/4” Bulkhead
J3: 1” Bulkhead
C2: 3/4” Ceiling
C3: 1” Ceiling
D: Unipak with Diffuse
Coated Lamp
Notes:
Fluorescent fixtures use PL type lamps
(one or two lamps included).
Verify Hazardous Location Certification with your requirements.
1-800-854-0021
www.ldpi-inc.com
55
THIS PAGE INTENTIONALLY LEFT BLANK
SPECIALTY
PRODUCTS
SPECIALTY CONTENTS
SERIES
Class I
D1
Class I
D2
Class II
Class III
Corrosion
Resistant
Paint
Spray
Marine◊
Task Cart
Multi Carts
XP Cart
•
•
•
•
•
Wet
Damp
Damp
Only
General
Industrial
Portable
Page #
•
•
59
•
•
60
•
•
61
Custom
62
Accessories
63
INFORMATION
Pg: 64
IP Code
Pg: 65
Pg: 65
Glossary
Pg: 66
Weights - Shipping
Pg. 67
Index
Pg. 68
PORTABLE LIGHTING - CARTS
INFORMATION
Task Cart
The single fixture light cart is designed to provide portable lighting solutions for
applications ranging from inspection to laboratory and general industrial task
lighting. Light fixture options allow you to customize your cart to fit your work
application requirements. SOME ASSEMBLY REQUIRED.
APPLICATIONS
Task Lighting
SPECIALTY
Industrial
Fixture Only
PART ORDER MATRIX
Example: 4346-INS-120
SERIES
FIXTURE
VOLTAGE
4346: Light Cart
INS: Inspection (Tempered, Striped Glass)
I: Open industrial (UL 1598)
120: 120V Standard
277: 277V Optional
20 Ft.
Power Cord
Optional Shelf Tray
(2 per cart)
Cart Frame
8” Semi-Pneumatic
Ball Bearing Wheels
1-800-854-0021
www.ldpi-inc.com
59
Industrial
INFORMATION
SPECIALTY
Multi-Fixture
The 4 Ft. 2 and 3 fixture light carts are designed to provide portable lighting solutions
for applications ranging from inspection to laboratory and general industrial task
lighting. A 4 Ft. single fixture horizontal mount cart is also available for all fixture types.
Fixtures are attached with swivel mounting brackets allowing for directional aiming of
the light (Hazardous location fixtures are stationary mounted).
ASSEMBLY REQUIRED.
APPLICATIONS
Task Lighting
Vertical Mount
Horizontal Mount 2 Fixture Only
Shown with optional tool tray
Fixture Only
Example: 3668-P-I-120
PART ORDER MATRIX
SERIES
WHEELS
FIXTURE
VOLTAGE
3668: 2 Fix. Cart
3669: 3 Fix. Vertical Cart
4520: 1-4 Ft. Horizontal Cart
P: 10” Tires Pneumatic (Std)
INS: Inspection Tempered, Striped Glass
I: Open Industrial (UL 1598)
120: 120V Standard
277: 277V Optional
Notes:
P/N 3668H and 3669H are Class I Div. 2 hazardous location carts.
These carts are assembled with a stationary fixture mounting bracket.
P/N 3669 and 3669H 3 Fixture carts: vertical mounting position ONLY.
P/N 3668H: Must specify vertical or horizontal mounting.
Add a V or H to the end of the part number.
3 Fixture Cart
Vertical Mount ONLY
25 Ft. Main
Power Cord
Optional
Outlet Box
Standard 10”
Pneumatic Tires
Optional Tool
Tray With
Adjustable
Shelves
Standard 10”
Non-Swivel
Pneumatic Tires
3 Fixture Inspection Cart
4520: 1-4Ft.
Horizontal Fixture
60
1-800-854-0021
www.ldpi-inc.com
INFORMATION
Explosion Proof
Lighting for Explosive Environments - The 380 Portable Light Cart is manufactured in
accordance with applicable NFPA standards. For use in hazardous environments and
laboratory applications. Portable lighting solutions for hazardous atmospheres. Light
can be directed where you need it most. Fixture(s) sold separately. LDPI recommends
consulting local authorities for approval of your application prior to purchase.
APPLICATIONS
Task Lighting
SPECIALTY
Industrial
380 Series Cart 4 Lamp
Fixture Only
PART ORDER MATRIX
Example: 4372-2-380-T8-2-4-120-HB
CART
SERIES
LAMP TYPE
LAMP QUANTITY
4372-2: 2 Lamp Cart
4372-3: 3 Lamp Cart
4372-4: 4 Lamp Cart
380
T5**
T5HO*
T8*
T8HO**
2: 2 Lamps
3: 3 Lamps***
4: 4 Lamps
LENGTH
VOLTAGE
OPTIONS
4: 4 Ft.
UNV: Universal Voltage
120-277V, 50/60Hz
HB: 93% Reflective specular reflector insert
Notes:
All T5, T5HO, T8, and T8HO are universal voltage
*5000K lamp standard for T5HO and T8 lamps
**4100K lamp standard for T8HO and T5 lamps
***3 lamp fixtures not available in T5 or T8HO
®
LDPI recommends consulting local electrical
authorities for approval of your application prior
to purchase.
Dimensions
58”
24”
24”
4 LAMP
2 LAMP
23 3/4”
27 5/8”
29 9/16”
1-800-854-0021
www.ldpi-inc.com
61
CUSTOM LIGHTING
SPECIALTY
Application Specific Lighting
INFORMATION
Need a Custom or Special Fixture?
LDPI, Inc. is an excellent source for that special needs custom lighting fixture.
LDPI, Inc. has the in-house engineering and manufacturing experts to handle most any need for Harsh or Hazardous Environments.
Examples of the LDPI, Inc. Customizing Capabilities:
•
•
•
•
•
•
•
•
Lumen Packages
Stainless Steel
Powder Coat
Custom RAL Colors
Custom Cord Installation
Mounts to Meet your Application
Light Controls
Fixture Protection Guards
If you do not see what you are looking for, contact us and we will design a custom package to meet your application needs.
email: [email protected]
or call our toll free number: 1-800-854-0021
Undercarriage Inspection Cart
376 Series: Wet/Damp Inspection Cart
62
1-800-854-0021
www.ldpi-inc.com
Custom Fixture Housing
INFORMATION
Cling-On Lens Protection
12” Film - Part Number: 3263
Single Roll or Case of 4
•
•
•
•
•
3 Mil plastic with custom acrylic adhesive
Protects lens coverings from over-spray
Applies easily to clean lens
Available In 12”, 18” and 25” widths
100 Feet per roll
Single Roll or Case of 2
SPECIALTY
ACCESSORIES
Single Roll
NOTE: Does not fit on 3312 Handle
Dispenser Handle - Part Number: 3312
NOTE: For 12” and 18” Film Rolls ONLY
Blast Booth Lens Cover
For use with the Slim Light, 400, Slim Light LED, and 400 LED Series.
Booth
Interior
Blast
Booth Panel
•
•
•
•
•
24 3/4”
(4 lamp)
30 7/8”
(6 lamp)
Fasteners
Not Included
in Kit
Helps protect fixture from high pressure blast media
1/16” clear polycarbonate lens
Lenses are easily interchangeable
Perfect for rear access fixtures
For front access, lens cover needs to be removed for relamping.
29”
29”
4 lamp fixtures
6 lamp fixtures
Lens Kit - P/N 3318
Lens Kit - P/N 7668
Lens Only - P/N 3316
Lens Only - P/N 7682
2 3/4”
Corner/Hip Mount
Horizontal or Vertical Mounting Corner/Hip Light Kit
The following is an acceptable method of installing panel mounted fixtures into the corner of a paint spray booth.
77 5/16"
To reduce shadowing, corner or hip lighting is ideal.
Corner light mounting option is available for:
Slim Light and Slim Light LED Series ONLY.
FIXTURE SOLD SEPARATELY
Shipping weight: 14#.
11 1/8"
390440J-3546
4714
Notes:
All wiring must be performed by a certified electrician and in accordance
with all national and local electrical codes and regulations.
Mounting requires drilling 7/8” hole in booth wall or ceiling to route flex
conduit out of booth.
13/
16"
Part #
15
13/
16"
22 1/2"
15
Fixture
1-800-854-0021
www.ldpi-inc.com
63
LIGHTING FUNDAMENTALS
INFORMATION
CLASSES
Class I, Gas or Vapor
(NEC Article 500-5, 5001-9)
Areas where inflammable gases or vapors may be present in sufficient quantities to produce an explosive or flammable mixture.
Class II, Dust
(NEC Article 500-6, 502-11)
Areas where combustible dusts are present in sufficient quantities to produce a hazardous environment.
Class III, Fiber
(NEC Article 500-7, 503-9)
Areas where ignitable fibers or flyings are present in sufficient quantities to produce ignitable mixtures.
DIVISIONS
Division 1, Always Present
(NEC Article 500-5a, 500-6a, 500-7a, 502-11a)
Areas where the hazardous condition is normally present, either continuously or periodically.
Division 2, Not Normally Present
(NEC Article 500-5b, 500-6b, 500-7b, 500-9b, 502-11b)
Areas where the hazardous condition is present due to accidental rupture, release, breakage, or unusual faulty operation of a closed container or system.
GROUPS (NEC Article 500-2, 500-3)
Class I
Class II
Group A - Acetylene
Group E - Metal Dust
Group B- Hydrogen
Group F - Coal Dust
Group C - Ether
Group G - Grain Dust
Group D - Gasoline
ZONAL CLASSIFICATIONS
IEC publication 79-10 defines the guidelines for classifying hazardous area. Instead of using Classes and Divisions, the term Zones is used as defined below.
Zone 0 - Is an area in which an explosive gas or vapor is continuously present or present for long periods, typically more than 1,000 hours per year. Generally, most
industrial users try to keep all electrical equipment out of the Zone 0 area. The only equipment approved is intrinsically safe equipment.
Zone 1 - Is an area in which an explosive gas atmosphere is likely to occur in normal conditions for more than 10 hours per year and less than 1,000 hours per year.
Zone 2 - Is defined as an area in which explosive gas or vapor atmospheres are not likely to occur and if it does, it is only for a short period of time, typicaly less
than 10 hours per year.
Zone 20 - Is an explosive atmosphere, resulting from dust which is present continuously.
Zone 21 - This is defined as an atmosphere where dust is occasionally present.
Zone 22 - This is defined as an atmosphere where dust is not normally present.
NOTE: Class III locations (fibers & flyings) are covered in Zone 20, 21, & 22.
CLASSIFICATION COMPARISONS
Hazardous
Material
Gas or Vapor
Dust
Fibers or Flyings
TEMPERATURE MARKINGS
NEC U.S.
Standards
IEC Euronorm
Standards
Class I, Div. 1
Zone 0 & Zone 1
Class I, Div. 2
Zone 2
Class II, Div. 1
Zone 20 and Zone 21
Class II, Div. 2
Zone 22
Class III, Div. 1
Zone 20 and Zone 21
Class III, Div. 2
Zone 22
Maximum
Surface
Temperatures
°C
°F
450
840
300
280
260
230
T-Code*
Maximum
Surface
Temperatures
T-Code*
°C
°F
T1
180
356
572
T2
165
329
T3B
536
T2A
160
320
T3C
500
T2B
135
275
T4
446
T2C
120
248
T4A
215
419
T2D
100
212
T5
200
392
T3
85
185
T6
T3A
* Based on 40°C (104°F) ambient
For complete information, refer to the National Electric Code (NEC)
64
1-800-854-0021
www.ldpi-inc.com
IP (International Protection) CODE
IP Code is a coding system to indicate the degree of protection by an enclosure against access to hazardous parts, ingress of solid objects, ingress of water, and to
give additional information in connection with such protection.
First Character indicates the degree of protection against the ingress of solid
objects.
Second Character indicates the degree of protection against the ingress of water
with harmful effects.
0
Non-protected
0
Non-protected
1
Protected against solid foreign objects of 50 mm diameter or greater
1
Protected against vertically falling water drops
2
Protected against solid foreign objects of 12.5 mm diameter or greater
2
Protected against vertically falling water drops as the enclosure is tilted 15°
3
3
Protected against spraying water
4
4
Protected against splashing water
5
Dust-protected
5
Protected against water jetting
6
Dust-tight
6
Protected against powerful water jetting
7
Protected against temporary immersion
8
Protected against continuous immersion
UL STANDARDS
INFORMATION
LIGHTING FUNDAMENTALS
ANSI/IES LATERAL LIGHT DISTRIBUTIONS
Number
Title
844
Luminaires for Use in Hazardous (Classified) Locations
924
Emergency Lighting and Power Equipment
1598
Luminaires
1598A
Supplemental Requirements for Luminaires
For Installation on Marine Vessels
8750
LED Equipment
Asymmetrical
Long and Narrow
Asymmetrical
Asymmetrical Asymmetrical Symmetrical
Forward Throw
IES RECOMMENDED LIGHTING LEVELS
Task Area
Footcandles
Task Area
Footcandles
Paint Booths
100 - 150
Areas with VDTs
75
Corridors/Stairways/Rest rooms
10 - 20
Classrooms
50 - 75
Storage Rooms
10 - 50
Cafeterias
50
Conference Rooms
20 - 50
Gymnasiums
30 - 50
General Offices
50 - 100
Manufacturing Assembly
50 - 500
Drafting/Accounting
100 - 200
Parking Areas (uncovered)
1-2
1-800-854-0021
www.ldpi-inc.com
65
GLOSSARY
INFORMATION
Color rendering index (CRI) - a method for describing the effect of a light source on the color appearance of objects being illuminated, with a CRI of 100 representing
the reference condition (and the maximum CRI possible). In general, a lower CRI indicates that some colors may appear unnatural when illuminated by a lamp.
Color temperature - see correlated color temperature.
Constant-wattage autotransformer (CWA) - the most common type of ballast used for HID lamps, it maintains a constant power (wattage) supply to the lamp when
system input voltage fluctuates.
Cord - Typically an insulated cable of 14 Ga. 3-wire or 5-wire leads pre-wired for installation. This may or may not include a plug, depending on the options selected.
Correlated color temperature (CCT) - a description of the color appearance of a light source in terms of warmth or coolness, as measured on the Kelvin scale (K).
As the temperature rises, the color appearance shifts from yellow to blue. Thus, lamps with a low CCT (3000K or less) have a yellow-white color appearance and
are described as “warm”; lamps with a high CCT (4000K and higher) have a blue-white color appearance and are described as “cool”.
Ballast factor (BF) - the ratio of light output of a lamp operated by a given ballast to the light output of the same lamp when operated by a reference ballast. Lamps
operated by a ballast with BF of 0.90 will provide 90 percent of their rated light output (lumens). BFs between 0.85 and 1.0 are the most common.
Disability glare - light that is relatively bright compared to the background, making vision measurably worse. The inability to see clearly as a result of the brightness
of headlights from an oncoming car at night is an example.
Discomfort glare - the type of glare that is uncomfortable and distracting, yet less obvious than disability glare. A bright light source in an individual’s peripheral vision
is an example.
Efficacy - the ratio of light output (lumens) to input power (watts) expressed in lumens per watt (LPW).
High pressure sodium (HPS) - a high-intensity discharge lamp type that uses sodium under high pressure as the primary light-producing element.
Illuminance - The amount of light that reaches a surface. Illuminance is measured in footcandles (lumens/square foot) or lux (lumens/square meter).
One footcandle equals 10.76 lux, although for convenience the IESNA uses 10 lux as the equivalent.
Instant-start - a method of starting fluorescent lamps. The voltage, which is applied across the electrodes to strike the electric arc, is up to twice as high as it is with
other starting methods. The higher voltage is necessary because the electrodes are not heated prior to starting.
Lamp life - the median life span of a very large number of lamps. Half of the lamps in a sample are likely to fail before the rated lamp life, and half are likely to survive
beyond the rated lamp life.
Lamp lumen depreciation (LLD) - the reduction in lamp light output that progressively occurs during lamp life.
LED - Light-emitting diode: a semiconductor diode that emits light when conducting current.
Lumen (lm) - a unit of measurement of the rate at which a lamp produces light. A lamp’s light output rating expresses the total amount of light emitted in all directions
per unit time. Ratings of initial light output provided by manufacturers express the total light output after 100 hours of operation.
Luminance - the photometric quantity most closely associated with the perception of brightness, measured in units of luminous intensity (candelas) per unit area
(feet squared or meters squared).
Luminaire efficiency - the ratio of the light emitted by luminaire to the light emitted by the lamp or lamps within it. Components of a luminaire, such as reflectors and
diffusers, absorb some of the light from the lamps(s). A highly efficient luminaire emits most of the light that the lamp(s) emits.
Metal halide (MH) - a high-intensity discharge lamp type that uses mercury and several halide additives as light-producing elements.
Open-circuit voltage - the voltage applied across the output terminals of a ballast when no load is connected. This is the voltage applied across a lamp circuit to start
a lamp. After starting, the voltage rapidly decreases and stabilizes at the operating voltage.
Preheat - a method of starting fluorescent lamps in which the electrodes are heated before a switch opens to allow a starting voltage to be applied across the lamp.
With preheat starting, the lamp flashes on and off for a few seconds before staying lit.
Power factor - a measure of how effectively a ballast converts current and voltage into usable power to operate the lamps. A power factor of 0.9 or greater indicates
a high power-factor ballast.
Prismatic lens - an optical component of a luminaire that is used to distribute the emitted light. It is usually a sheet of plastic with a pattern of pyramid-shaped
refracting prisms on one side. Most ceiling mounted luminaries in commercial buildings use prismatic lenses.
Rapid-start - a method of starting fluorescent lamps in which the ballast supplies voltage to heat the lamp electrodes for one to two seconds prior to starting and,
in most cases, during lamp operation. A rapid-start system starts smoothly, without flashing.
Reflected glare - often called veiling reflections, glare that results from light shining off polished or glossy surfaces.
Restrike time - the time required for a lamp to restrike, or start, after the lamp is extinguished. Normally, HID lamps need to cool before they can be restarted.
Visual comfort probability (VCP) - a system for estimating discomfort glare that predicts the percentage of people who are likely to find the lighting comfortable,
against the percentage that find it uncomfortable.
Wire Whip - Typically 14 Ga. 3-wire or 5-wire insulated solid wire leads with a 1/2” exposed for installation (non-corded).
66
1-800-854-0021
www.ldpi-inc.com
SERIES
Ave. of Weight
Min. Of Weight
Max. of Weight
32.7
17.8
55.3
LE101
LE121
LE151
LEFP
Call Customer Service
72.0
39.5
97.0
14
10
21
LEINS2
17.0
9.0
23.8
LEINS3
85.8
62.8
115.0
LE201
14.2
13.5
14.8
LE203
11.0
6.8
12.5
LEVP
6.0
5.0
8.0
LE300
26.0
24.0
29.0
240 LED
52.8
47.8
58.0
241 LED
45.8
45.5
46.3
260-261 LED
57.9
56.8
58.8
400 LED
47.0
36.5
55.5
Slim Light LED
43.0
32.3
51.5
LE401
26.1
23.8
29.8
LEHL
21.0
21.0
21.0
H LED
30.0
27.0
35.0
380 LED
42.0
42.0
42.0
222
19.8
13.5
32.0
229H
18.8
17.5
22.0
236
40.0
38.0
42.0
INS2
16.3
11.8
22.5
INS3
73.0
45.8
110.0
240 8FT
106.5
105.0
108.0
24.0
376
11.9
4.5
379i
25.8
23.0
30.0
240
57.8
36.0
108.0
241
50.1
43.8
62.0
260-261
63.0
56.0
73.0
280-281
116.9
112.0
120.0
384
23.3
0.0
35.0
400
45.3
34.5
57.0
400SLB
50.7
43.3
57.0
440 2x4
47.0
45.3
48.0
440T/THO
44.2
41.0
47.0
Slim Light
43.2
42.9
63.0
CFL
23.0
21.0
25.0
380
55.9
30.8
85.0
Induction
HID FL
48.0
37.0
52.0
HID H
29.4
21.0
52.0
HID H2
29.4
21.0
52.0
HID XP
51.0
51.0
51.0
HID XP2
23.0
23.0
23.0
Single Cart
Multi Cart
380XP Cart
Custom
INFORMATION
WEIGHTS - SHIPPING
1-800-854-0021
www.ldpi-inc.com
67
INDEX
INFORMATION
68
222
Pg: 27
Pg: 64
236
Pg: 29
HID FL
Pg: 51
240
Pg: 36
HID H
Pg: 52
241
Pg: 37
HID H2
Pg: 53
376
Pg: 33
HID XP
Pg: 54
380
Pg: 46
HID XP2
Pg: 55
384
Pg: 35
INS2
Pg: 30
400
Pg: 40
INS3
Pg: 31
229H
Pg: 28
IP Code
Pg: 65
240 8Ft.
Pg: 32
LE101
Pg: 5
240 LED
Pg: 15
LE121
Pg: 6
241 LED
Pg: 16
LE151
Pg: 7
260-261
Pg: 38
LE201
Pg: 11
260-261 LED
Pg: 17
LE203
Pg: 12
280-281
Pg: 39
LE300
Pg: 14
379i
Pg: 34
LE401
Pg: 20
380 LED
Pg: 23
LEFP
Pg: 8
400 LED
Pg: 18
LEHL
Pg: 21
400SLB
Pg: 41
LEINS2
Pg: 9
440 2x4
Pg: 42
LEINS3
Pg: 10
440T/THO
Pg: 43
LEVP
Pg: 13
Accessories
Pg: 63
Pg: 65
CFL
Pg: 45
Multi Fixture Task Cart
Pg: 60
Custom Lighting
Pg: 62
Slim Light
Pg: 44
Explosion Proof Cart
Pg: 61
Slim Light LED
Pg: 19
Glossary
Pg: 66
Task Cart
Pg: 59
H LED
Pg: 22
Weights - Shipping
Pg: 67
1-800-854-0021
www.ldpi-inc.com
LDPI, Inc.
Industrial and Hazardous Lighting
www.ldpi-inc.com
LPI, Inc.
Personnel Lift Systems and Work Platforms
www.lpi-inc.com
Pro-Cise, Inc.
Fabrication & Machining Solutions
www.pro-cise.com
Badger Industrial Supply and Equipment, LLC
Industrial Supplies and Equipment
www.badgerie.com
Plank Enterprises, Inc. is a Family owned and operated company with four separate business units that design,
manufacture, distribute, and sell industrial and commercial products worldwide.
Tech Center
Chippewa Falls, WI
Headquarters
Eau Claire, WI
LDPI, Inc.
4404 Anderson Drive
Eau Claire, WI 54703
Toll Free: 1-800-854-0021
Fax: 715-726-0112
Web: www.ldpi-inc.com
E-mail: [email protected]
LDPI, Inc. Tech Center
206 Cashman Drive
Chippewa Falls, WI 54729
Lighting Solutions
Form #: D-1282 © LDPI, Inc. 22MAR2016
LDPI® and LEDSTRONG® are registered trademarks of LDPI, Inc.

D-1282 Product Catalog

Transcription

Similar documents

Industrial Lighting Fixtures