ingersoll rand air compressors

Distributors For:
Branch Directory:
149 Glasgow Road
Wishaw
Lanarkshire
ML2 7QJ
Tel 01698 355711
Fax 01698 359299
Wellheads Road
Farburn Industrial Estate
Dyce, Aberdeen
AB21 7HG
Tel 01224 723434
Fax 01224 723545
Fleming Close
Segensworth East
Fareham
Hampshire
PO15 5SB
Tel 01489 588398
Fax 01489 588381
Woodland House
Unit 2, Hall Dene Way
Seaham Grange Ind Est
Seaham
SR7 0PU
Tel 0191 521 4111
Fax 0191 521 1616
E-mail [email protected]
www.mbairsystems.co.uk
www.airwinch.co.uk
ingersoll rand
air compressors
type 30 reciprocating compressors
The Ingersoll Rand T30 has been the leader in its class since it
was introduced in 1929. Whether this is measured by reliability,
efficiency, rugged flexibility or maintainability, it has no equal.
Designed for heavy industrial applications, the two stage
reciprocating air compressors provide the quality and
performance that exceed customer requirements.
Others may claim to handle heavy duty
applications, but the T30 defines the
concept. Run it in the most demanding
intermediate duty application imaginable.
It won’t make any difference because this
compressor performs with total
dependability in the most demanding,
heavy-duty industrial applications.
Throughout this brochure we try to show you
some of the features which make the T30
unique and ideal to meet your demands of a
compressor package in the 3-30 HP range.
Many compressor applications need care
and experience to ensure that the correct
machine and configuration is selected to
provide the level of efficiency and reliability
which you expect. Our Sales offices and
Distributors are ideally qualified and
experienced to assist you in this task.
If you are seeking information about a
new compressor, advice about an existing
installation or ancillary equipment or
spare parts, you will find knowledge
available to assist you.
After all, we’ve been doing this for over 100 years!
No other Reciprocating
Compressor offers these
efficient, cost-saving
features:
A durable cast iron pump
which provides 15,000+
hours of trouble-free
service
A 100% copper finned
intercooler lowers operating
temperatures and extends
pump life
An overhung crankshaft
and single-piece connecting
rod allow access to the
running gear for easy
maintenance
The Inside Story
Removable cylinders
Easy to repair, provides even,
360° cooling and eliminates
hot spots
One piece connecting rod
For few wearing parts
Simple multifinger valves
Dependable and easy
to maintain
Overhung crankshaft
Precision balanced to run
smoothly and quietly
Centrifugal unloader
(From 10HP on)
Saves motor life
Individually cast cylinders
provide flexible, less
expensive maintenance on
just one cylinder at a time
rather than servicing the
entire pump
Finned Intercooler
Runs cool, even in the most
demanding conditions
Splash Lubrication
Simple and reliable,
does not require an oil
pump, making the system
inexpensive and easy
to maintain
Introduction
T30
Range
Premium Range Illustrated
11 bar receiver mounted,
14 bar base mounted.
Value Range
CE Marked receivers to 87/404/EEC.
The Type-30TM Value Package offers customers an
economical and dependable compressed air solution.
It is perfect for commercial, automotive, and light
industrial applications.
4 pole IP55 TEFV Motor.
Standard voltage 400-3-50.
Totally enclosed belt
guard design.
Durable 100% cast iron construction.
Dry type inlet filter.
Automatic start/stop pressure switch operation.
Factory fill of lubricant.
Auto Start and Stop
regulation by pressure switch up
to and including 7.5hp.
Constant Speed Control
10hp to 30hp.
Value Range Features
Flexible discharge tube.
Auto Start and Stop regulation by pressure
switch (3/4hp) or by the starter (5.5/7.5hp)
up to and including 7.5hp.
The Type-30TM Premium Package offers all the features of the
Value Package plus a number of additional features to further
enhance durability and performance. The Premium Package is
ideally suited for manufacturing and more heavy duty
industrial applications.
Star Delta starter from 5.5hp.
Low Oil Level Switch.
Premium Range Features
Auto Condensate Drain on
all receiver mounted units.
Anti-Vibration pads.
Intermittent duty cycle.
Premium Range
Dual Control regulation 10hp to 30hp.
Belt Guard Mounted,
Air Cooled After Cooler.
Manual tank drain.
Belt guard mounted, air cooled after cooler.
Low oil level switch to reduce maintenance requirement.
Provides more reliable performance.
Auto condensate drain on receiver mounted units.
High performance with lower noise levels.
W
ei
gh
kg t
D
Lx im
W en
xH si
(c ons
m
)
Di
sp
la
ce
L/ men
Pi
M t
st
in
on
Di
sp
la
ce
m
CF ent
M
Re
ce
lit ive
re r
s
Pi
st
on
Pr
es
su
re
ba Ma
r( x
g)
M
ot
o
Hp r
M
od
el
M
ot
o
Kw r
The new rationalised T30 range comprises of Value and Premium
packages making choosing the right compressor even easier.
T30/200/3 V
2.2
3.0
11
200
290
10.2
162 x 68 x 122
140
T30/X/3 V
2.2
3.0
14
-
290
10.2
125 x 80 x 85
90
T30/200/4 V
3.0
4.0
11
200
387
13.7
162 x 68 x 122
145
T30/X/4 V
3.0
4.0
14
-
362
12.8
125 x 80 x 85
95
T30/200/5.5 V
4.0
5.5
11
200
523
18.5
162 x 68 x 122
170
T30/X/5.5 V
4.0
5.5
14
-
523
18.5
125 x 80 x 85
115
T30/200/7.5 V
5.5
7.5
11
200
702
24.8
162 x 68 x 122
180
T30/X/7.5 V
5.5
7.5
14
-
657
23.2
125 x 80 x 85
135
T30/200/10 V
7.5
10.0
11
200
1013
35.8
162 x 80 x 145
235
T30/X/10 V
7.5
10.0
14
-
1013
35.8
125 x 80 x 85
185
T30/500/15 V
11.0
15.0
11
500
1441
50.9
210 x 90 x 165
425
T30/X/15 V
11.0
15.0
14
-
1292
45.6
155 x 85 x 110
295
T30/500/20 V
15.0
20.0
11
500
1713
60.5
210 x 90 x 165
435
T30/X/20 V
15.0
20.0
14
-
1713
60.5
155 x 85 x 110
300
T30/500/25 V
18.5
25.0
11
500
2620
92.5
210 x 90 x 165
580
-
2620
92.5
155 x 85 x 110
460
11
500
2932
103.5
210 x 90 x 165
600
T30/X/30 V
22.0
30.0
14
-
2932
103.5
155 x 85 x 110
480
D
Lx im
W en
xH si
(c ons
m
)
Re
ce
lit ive
re r
s
Pi
st
on
Pr
es
su
re
ba Ma
r( x
g)
M
od
el
W
ei
gh
kg t
14
30.0
Di
sp
la
ce
L/ men
Pi
M t
st
in
on
Di
sp
la
ce
m
CF ent
M
25.0
22.0
M
ot
o
Hp r
18.5
T30/500/30 V
M
ot
o
Kw r
T30/X/25 V
T30/200/3 P
2.2
3.0
11
200
290
10.2
162 x 78 x 122
180
T30/X/3 P
2.2
3.0
14
-
290
10.2
125 x 95 x 85
130
T30/200/4 P
3.0
4.0
11
200
387
13.7
162 x 78 x 122
195
T30/X/4 P
3.0
4.0
14
-
362
12.8
125 x 95 x 85
145
T30/200/5.5 P
4.0
5.5
11
200
523
18.5
162 x 68 x 122
220
T30/X/5.5 P
4.0
5.5
14
-
523
18.5
125 x 95 x 85
165
T30/200/7.5 P
5.5
7.5
11
200
702
24.8
162 x 68 x 122
230
T30/X/7.5 P
5.5
7.5
14
-
657
23.2
125 x 95 x 85
185
T30/200/10 P
7.5
10.0
11
200
1013
35.8
162 x 80 x 145
300
T30/X/10 P
7.5
10.0
14
-
1013
35.8
125 x 95 x 85
250
T30/500/15 P
11.0
15.0
11
500
1441
50.9
210 x 90 x 165
500
T30/X/15 P
11.0
15.0
14
-
1292
45.6
155 x 100 x 110
370
T30/500/20 P
15.0
20.0
11
500
1713
60.5
210 x 90 x 165
510
T30/X/20 P
15.0
20.0
14
-
1713
60.5
155 x 100 x 110
375
T30/500/25 P
18.5
25.0
11
500
2620
92.5
210 x 90 x 165
655
T30/X/25 P
18.5
25.0
14
-
2620
92.5
155 x 100 x 110
535
T30/500/30 P
22.0
30.0
11
500
2932
103.5
210 x 90 x 165
675
T30/X/30 P
22.0
30.0
14
-
2932
103.5
155 x 100 x 110
555
Specification
Ingersoll Rand - T30
a leader in its class
since 1929
T30
Customised Engineered Packages
Reciprocating Air Compressors
This ‘special’ package was designed and built for
a Middle-East Oil Company and includes duplex 7100
T30 compressors and dryers, filters and controls all
by Ingersoll-Rand.
T30 Reciprocating Air Compressors
These are available to meet individual customers
configurations and specifications.
All Season Select®
All Season Select® lubricant is a synthetic, all-temperature
blend that is designed to increase efficiency, reduce wear
and prevent carbon buildup. It performs four times longer than
petroleum-based lubricants. Recommended 2,000 hours of
service between lubricant change-out under
normal operating conditions.
•
•
•
•
•
•
•
•
Specifically formulated for T30 Cast Iron Range machines
Extended working life
Reduced friction
Eliminates carbon build-up
Longer oil change intervals - 2000 hours or 2 years
Greater fire resistance
Excellent high temperature protection
Easy start-up
Warranty
• 2 years warranty for T30 packages
www.air.irco.com
Industrial Systems - Light
Air Solutions Group
Swan Lane, Hindley Green
Wigan WN2 4EZ, UK
Tel: +44 (0)1942 257171
Fax: +44 (0)1942 254162
Ingersoll-Rand compressors are not designed, intended, or approved for breathing applications. Ingersoll-Rand does not approve specialised
equipment for breathing air applications and assumes no responsibility or liability for compressors used for breathing air service. Nothing contained on
these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties
or terms and conditions of sale of products shall be in accordance with Ingersoll-Rand’s standard terms and conditions for sales of such products,
which are available on request. Product improvement is a continuing goal at Ingersoll-Rand. Designs and specifications are subject to change without
notice or obligation.
CPN 22272025
Oilless
Two Stage Non-Lubricated
75 Years on and
still going strong
Ingersoll-Rand’s oilless air compressors were designed for
the tough requirements of industries demanding oil-free air.
Superior dual cooling and precision fit of high quality
components provide reliable 24-hour continuous operation.
This T30 has no oil in the cylinders, but uses teflon rings
and rider bands. They supply air free from oil.
They are available on base or receiver, with versions
from 2 to 20 HP.
The Ingersoll-Rand T30 has been the leader in its
class since it was introduced in 1929. Whether this
is measured by reliability, efficiency, rugged flexibility
or maintainability, it has no equal.
Standard Features
Standard Features
•
•
•
•
•
•
•
•
Designed for heavy industrial applications, the two
stage reciprocating air compressors provide the quality
and performance that exceed customer requirements.
Others may claim to handle heavy duty applications,
but the T30 defines the concept. Run it in the most
demanding intermediate duty application imaginable.
It won’t make any difference because this compressor
performs with total dependability in the most demanding,
heavy-duty industrial applications.
•
•
•
•
•
CE Marked receivers to 87/404/EEC
4 pole IP55 TEFV Motor
Standard voltage 400-3-50
Auto Start and Stop regulation by pressure switch
up to 7.5hp
Dual control regulation 10hp and above
Star Delta starting available from 10hp
Aftercoolers standard on all units
Receiver mounted auto drain
Safety relief valve and check valve fitted
•
•
Throughout this brochure we try to show you some of the features which make the T30 unique and ideal to meet your
demands of a compressor package in the 2-30 HP range.
•
•
•
•
•
OL5F55
T30 Reciprocating Air Compressors
T30 Two Stage Reciprocating Compressor
CE Marked receivers to 87/404/EEC
4 pole IP55 TEFV Motor
Standard voltage 400-3-50
Auto Start and Stop regulation by pressure switch
up to 4 hp
Constant Speed Control regulation by auxiliary valve
from 5.5hp on base mounted units
Constant speed control regulation by auxiliary valve
from 10hp on receiver mounted units
DOL starting by pressure switch up to 5.5hp
Star Delta starting available from 10hp
Inlet air filter
Pressure Gauge from receiver pressure
Low oil level switch fitted as standard
10T3NLH200
Many compressor applications need care and experience to ensure that the correct machine and configuration is selected
to provide the level of efficiency and reliability which you expect.
Our Sales offices and Distributors are ideally qualified and experienced to assist you in this task. If you are seeking
information about a new compressor, advice about an existing installation or ancillary equipment or spare parts,
you will find knowledge available to assist you.
After all, we’ve been doing this for over 100 years!
Model
Bare
Motor
Pressure Max
Receiver
Piston
Revolutions
bar(g)
litres
Displacement
l/min
per minute
rpm
Unit
kW
Model
Bare
Unit
Motor
hp
Dimensions Weight
LxWxH
cm
kg
Pressure Max
Receiver
Piston
Displacement
Revolutions
per minute
Dimensions
LxWxH
23ANLE20
23ANL
1.5
2.0
6.9
200
230
730
137 x 51 x 108
170
235HNLE30
235HNL
2.2
3.0
6.9
200
310
490
143 x 54 x 107
210
232
kW
hp
bar(g)
litres
l/min
rpm
cm
235HNLF40
235HNL
3.0
4.0
6.9
270
450
710
146 x 54 x 111
OL5F55
OL5
4.0
5.5
8.6
270
690
820
146 x 64 x 112
5T2NLH100
5T2NL
7.5
10
8.6
500
1010
900
187 x 63 x 153
475
OL5X55
OL5
4.0
5.5
8.6
-
690
820
106 x 54 x 59
10T3NLH150
10T3NL
11
15
8.6
500
1500
670
187 x 69 x 192
615
OL5F75
OL5
5.5
7.5
8.6
270
930
1100
146 x 64 x 112
10T3NLH200
10T3NL
15
20
8.6
500
2000
890
187 x 69 x 192
630
OL5X75
OL5
5.5
7.5
8.6
-
930
1100
106 x 54 x 59
23ANLX20
23ANL
1.5
2.0
6.9
N/A
230
730
80 x 48 x 59
84
OL10H100
OL10
7.5
10
8.6
500
1430
1135
187 x 70 x 129
235HNLX30
235HNL
2.2
3.0
6.9
N/A
310
490
92 x 56 x 58
127
235HNL
3.0
4.0
6.9
N/A
450
710
92 x 56 x 58
127
OL10X100
OL10
7.5
10
8.6
-
1135
128 x 66 x 65
235HNLX40
OL15H200
OL15
15
20
8.6
500
1900
945
187 x 70 x 129
5T2NLX55
5T2NL
4.0
5.5
8.6
N/A
640
570
128 x 63 x 82
227
OL15X200
OL15
15
20
8.6
-
1900
945
128 x 66 x 65
5T2NLX100
5T2NL
7.5
10
8.6
N/A
1010
900
128 x 63 x 82
252
OL25VH300
OL25
22
30
8.6
500
3300
1100
220 x 115 x 216
10T3NLX150
10T3NL
11
15
8.6
N/A
1500
670
154 x 79 x 115
360
OL25X300
OL25
22
30
8.6
-
3300
1100
185 x 94 x 116
10T3NLX200
10T3NL
15
20
8.6
N/A
2000
890
154 x 79 x 115
380
1430
Vacuum Pumps
The Inside Story
For vacuum applications, single and two stage
base mounted packages are available.
No other Reciprocating Compressor
offers these efficient, cost-saving
features:
Standard Features
•
•
•
•
• A durable cast iron pump which provides 15,000 +
hours of trouble-free service
• A 100% copper finned intercooler lowers operating
temperatures and extends pump life
• An overhung crankshaft and single-piece connecting
rod allow access to the running gear for easy
maintenance
• Individually cast cylinders provide flexible, less
expensive maintenance on just one cylinder at
a time rather than servicing the entire pump
4 pole IP55 TEFV Motor
Standard voltage 400-3-50
Star Delta starting available from 10hp
Factory-fill of lubricant
7VX75
The Inside Story
Removable cylinders
Easy to repair, provides even,
360° cooling and eliminates
hot spots
One piece connecting rod
For few wearing parts
Simple multifinger valves
Dependable and easy
to maintain
Overhung crankshaft
Precision balanced to run
smoothly and quietly
Model
Bare
Unit
Motor
kW
Vacuum Max
hp
mm Hg
%
Receiver
litres
Piston
Displacement
l/min
Revolutions
per minute
rpm
Dimensions
LxWxH
cm
Weight
kg
V235X20
V235
1.5
2.0
737
97.0
-
510
790
83 x 46 x 48
95
V235TX20
V235T
1.5
2.0
752
98.9
-
255
790
83 x 46 x 48
95
V244X30
V244
2.2
3.0
737
97.0
-
900
790
88 x 56 x 53
148
V244TX30
V244T
2.2
3.0
753
99.1
-
450
790
88 x 56 x 53
148
V255X55
V255
4.0
5.5
737
97.0
-
1730
770
92 x 63 x 61
173
V255TX55
173
V255T
4.0
5.5
754
99.2
-
870
770
92 x 63 x 61
7VX75
7V
5.5
7.5
737
97.0
-
2800
900
122 x 65 x 72
260
7VTX75
7VT
5.5
7.5
753
99.1
-
1400
900
122 x 65 x 72
260
15VX100
15V
7.5
10
742
97.0
-
3600
770
137 x 79 x 88
325
15VTX100
15VT
7.5
10
754
99.2
-
2400
770
137 x 79 x 88
325
Centrifugal unloader
(From 10HP on)
Saves motor life
Finned Intercooler
Runs cool, even in the most
demanding conditions
Splash Lubrication
Simple and reliable,
does not require an oil
pump, making the system
inexpensive and easy
to maintain
Two Stage Lubricated
High Pressure
Standard Features
Range of base-mounted compressors that can reach
pressures as high as 345 bar.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CE Marked receivers to 87/404/EEC
4 pole IP55 TEFV Motor
Standard voltage 400-3-50
Auto Start and Stop regulation by pressure switch up to 7.5 hp
Dual control regulation on 10hp to 30hp
receiver mounted units
Constant Speed Control on 10hp to 30hp
Base Mounted units
DOL starting by pressure switch up to 7.5hp
DOL starter (10hp to 30hp)
Star Delta Starter available from 5.5hp
Low oil level switch fitted from 10hp to 30hp
Totally enclosed belt guard design
Dry type inlet filter
Flexible discharge tube
Factory-fill of lubricant
Model
Pump Unit
Motor
Pressure Max
Receiver
kW
hp
bar(g)
litres
Standard Features
•
•
•
•
•
•
AE3E30
Piston
Displacement
l/min
CFM
•
•
•
•
Dimensions
LxWxH
cm
4 pole IP55 TEFV Motor
Standard voltage 400-3-50
Auto Start and Stop regulation by pressure switch
DOL starting by pressure switch
Star Delta starting available from 10hp
Low oil level switch fitted as standard
(except model 231x30)
Intercooler fitted
Inlet air filter
Cast iron multi stage pump unit
Factory-fill of lubricant
Weight
kg
H15T4X200
AE3E30
2340
2.2
3.0
11.0
200
290
10.2
138 x 49 x 98
140
AE3F40
2340
3.0
4.0
11.0
270
396
13.9
146 x 49 x 103
160
AE3F55
2475
4.0
5.5
11.0
270
525
18.5
146 x 53 x 106
180
AE3H75
2475
5.5
7.5
11.0
500
705
24.9
187 x 53 x 116
260
AE3H100
2545
7.5
10.0
11.0
500
1010
35.6
187 x 74 x 126
315
AE3H150
7100
11.0
15.0
11.0
500
1440
50.8
187 x 71 x 138
425
AE3H200
7100
15.0
20.0
11.0
500
1720
60.7
187 x 71 x 138
435
AE3H250
3000
18.5
25.0
11.0
500
2640
93.2
187 x 83 x 152
580
AE3H300
3000
22.0
30.0
11.0
500
2960
104.5
187 x 83 x 152
600
E3E30
2340
2.2
3.0
14.0
200
290
10.2
137 x 49 x 95
180
E3F40
2340
3.0
4.0
14.0
300
370
13.0
160 x 49 x 100
195
E3F55
2475
4.0
5.5
14.0
300
525
18.5
160 x 49 x 103
230
E3H75
2475
5.5
7.5
14.0
500
660
23.3
187 x 61 x 122
303
E3H100
2545
7.5
10.0
14.0
500
1010
35.6
187 x 74 x 130
360
E3H150
7100
11.0
15.0
14.0
500
1280
45.2
187 x 71 x 141
505
E3H200
7100
15.0
20.0
14.0
500
1720
60.7
187 x 71 x 141
520
E3H250
3000
18.5
25.0
14.0
500
2640
93.2
187 x 83 x 157
635
E3H300
3000
22.0
30.0
14.0
500
2960
104.5
187 x 83 x 157
635
E3X30
2340
2.2
3.0
14.0
N/A
290
10.2
82 x 49 x 50
90
E3X40
2340
3.0
4.0
14.0
N/A
370
13.0
82 x 49 x 50
90
E3X55
2475
4.0
5.5
14.0
N/A
525
18.5
85 x 53 x 53
115
E3X75
2475
5.5
7.5
14.0
N/A
660
23.3
85 x 53 x 53
135
231X30
231
E3X100
2545
7.5
10.0
14.0
N/A
1010
35.6
106 x 74 x 66
183
7T2X100
7T2
E3X150
7100
11.0
15.0
14.0
N/A
1280
45.2
126 x 71 x 80
292
15T2X200-35
E3X200
7100
15.0
20.0
14.0
N/A
1720
60.7
126 x 71 x 80
292
E3X250
3000
18.5
25.0
14.0
N/A
2640
93.2
133 x 83 x 92
460
E3X300
3000
22.0
30.0
14.0
N/A
2960
104.5
133 x 83 x 92
480
Model
Bare
Unit
Motor
Pressure Max
Receiver
hp
bar(g)
litres
2.2
3.0
35
N/A
211
8.5
12.5
35
N/A
1050
15T2
15
20
35
N/A
15T2X200-70
15T2
15
20
70
15T4X200
15T4
15
20
H15T4
15
20
kW
H15T4X200
Piston
Revolutions
Displacement per minute
l/min
rpm
Dimensions
LxWxH
cm
Weight
670
87 x 51 x 51
100
820
124 x 67 x 84
275
1471
950
143 x 84 x 87
415
N/A
1230
790
143 x 84 x 87
415
241
N/A
988
930
150 x 78 x 108
505
345
N/A
988
930
150 x 78 x 108
525
kg