KISS LE Manual KISS LE Manual

Transcription

PINBALL
MACHINE
SERVICE AND OPERATION MANUAL
WARNING
IMPORTANT HEALTH WARNING: PHOTOSENSITIVE SEIZURES - A very small percentage of people may experience a seizure when exposed to
certain visual images, including flashing lights or patterns. Even people with no history of seizures of epilepsy may have an undiagnosed condition that
can cause “photosensitive epileptic seizures” due to certain visual images, flashing lights or patterns. Symptoms can include light-headedness, altered
vision, eye or face twitching, jerking or shaking of arms or legs, disorientation, confusion, momentary loss of awareness, and loss of consciousness or
convulsions that can lead to injury from falling down or striking nearby objects.
IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU EXPERIENCE ANY OF THESE SYMPTOMS.
Stern Pinball machines are assembled in Melrose Park, Illinois, USA; each pinball machine has unique characteristics that make it a one-of-a-kind
American-made product. Each machine will have variations in appearance resulting from differences in the machine’s particular wood parts, individual
silk screened art and mechanical assemblies. Stern Pinball has inspected each game element to insure it meets our quality standards.
© 2015 KISS Catalog, Ltd. Under License to Epic Rights.
Games configured for North America operate on 60 cycle electricity only. These games will not operate in countries with 50 cycle electricity (Europe
UK, Australia).
1-800-KICKERS - [email protected]
WWW.STERNPINBALL.COM - FACEBOOK.COM/STERNPINBALL
KISS LE
KISS LIMITED EDITION #500-55H2-01
MANUAL #780-50H2-01

TABLE OF CONTENTS
1. Setup and Moving................................... 3
1.1
1.2
1.3
1.4
1.5
First-time Setup Instructions................................ 3
Transporting the Game......................................... 6
Maintenance......................................................... 7
Maintenance Kits.................................................. 7
Common Parts...................................................... 7
2.1
2.2
2.3
2.4
2.5
2.6
2.7
SPIKE System Overview....................................... 8
Node Bus Cabling................................................. 8
System Power....................................................... 8
SPIKE Node addresses......................................... 8
SPIKE Node Programming................................... 8
SPIKE System Terminology.................................. 9
Common SPIKE Node Boards.............................. 9
3.1
3.2
3.3
3.4
SPIKE Node Boards............................................ 10
Driver Reference................................................. 10
Switch Reference................................................ 12
Light Reference................................................... 15
2. SPIKE System and Node Guide............. 8
3. Light, Switch, and Driver Reference.... 10
4. Electronic Pinouts and Schematics.... 20
4.1 SPIKE CPU Node 0............................................. 20
4.2 Node 1 Cabinet................................................... 22
4.3 Lower Playfield 48V 8-Driver Pinout Node 8 ..... 23
4.4 Node 9 Mid Playfield 8-Driver 48V Pinout.......... 24
4.5 Node 10 Upper Playfield 8-Driver 48V Pinout... 25
4.6 Node 11 Upper Playfield 32-Light and Switch
Pinout ........................................................................... 26
4.7 Dual Motor Driver................................................ 28
4.8 Main Power Supply............................................. 28
4.9 Trough Opto Transmitter..................................... 28
4.10 Trough Opto Receiver......................................... 28
4.11 KISS LE Lower Playfield Grid LED...................... 29
4.12 KISS LE Upper Playfield LED.............................. 29
4.13 Power Distribution Board.................................... 30
4.14 Power Plug Wiring.............................................. 30
5. Parts Reference..................................... 31
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
5.12
5.13
5.14
5.15
5.16
5.17
5.18
2
Playfield Rubber Parts........................................ 31
Rubber Size Chart............................................... 31
Playfield Assemblies, Top................................... 32
Playfield Assemblies, Bottom............................. 33
Backbox Parts.................................................... 34
Speaker Panel Parts........................................... 34
Cabinet Parts...................................................... 35
Auto Launch Assembly....................................... 36
Ball Trough Assembly......................................... 36
Flipper Assembly, Left......................................... 37
Flipper Assembly, Right...................................... 37
Slingshot Assemblies.......................................... 38
Slingshot Flash Assy - 02................................... 38
Slingshot Flash Assy- 04.................................... 38
Power Scoop...................................................... 39
Up-Post Vuk Assembly....................................... 39
Pop Bumper Assembly....................................... 40
Right Ramp Assembly........................................ 41
SPIKE PINBALL SOFTWARE UPDATE INSTRUCTIONS
1. Obtain game software update file (filename ends
in “.spk”) from www.sternpinball.com or from
authorized Stern distributor.
2. Place game software update file ( “.spk”) in root
directory of a blank FAT32-formatted USB flash
drive
3. Use backbox power switch to turn off game
4. Plug in USB flash drive to CPU board USB connector (CN20 or CN21). Refer to www.sternpinball.com
5. Turn on game
6. The game will automatically begin software
update
7. Select the correct .spk update file from list.
8. Press Enter on the service switches to start
update
9. When the display indicates “Update Complete”,
turn off game
10. Remove USB flash drive from CPU board
11. Turn game on to complete the update and play
pinball!
12. Detailed instructions and troubleshooting tips
are available in the game manual, www.sternpinball.com and authorized Stern distributors.
5.19
5.20
5.21
5.22
5.23
5.24
5.25
5.26
5.27
5.28
5.29
5.30
5.31
5.32
5.33
5.34
5.35
5.36
5.37
5.38
5.39
5.40
5.41
5.42
5.43
Amplifier Assembly............................................. 41
Left Ramp Assembly........................................... 41
Paul Assembly.................................................... 41
Plastic Flash Assy - 05........................................ 42
Plastic Assembly - 06......................................... 42
Ball Guide Assembly - 03................................... 43
1-Bank Drop Target w/TRIP................................ 44
Ball Lock Assy KISS LE...................................... 44
Solenoid Assembly............................................. 45
Spinning Disk Assembly..................................... 45
Assy Arch With Insert.......................................... 46
Bk Panel Plastic Exit Assy.................................. 46
Assy 4-Bank Drop Target.................................... 46
Diverter Coil Assembly........................................ 47
Paul Plunger Assembly....................................... 47
RU Switch 1-Way Gate Assy.............................. 47
Bk Panel Plastic Assy LE.................................... 47
6.1
6.2
6.3
Game Dimensions............................................... 48
Warranty.............................................................. 49
Warnings, Compliance, and Legal Notices......... 49
6. Specifications........................................ 48
KISS LIMITED EDITION MANUAL #500-55H2-01
© 2015 KISS Catalog, Ltd.
Under License to Epic Rights.
SETUP AND MOVING
1. SETUP AND MOVING
1.1 FIRST-TIME SETUP
INSTRUCTIONS
Your brand new Stern Pinball Machine is
carefully packed for safety and security.
For your safety, exercise caution and use
the correct tools and sufficient help when
setting up your new game.
CAUTION: AT LEAST TWO (2)
PEOPLE ARE REQUIRED TO
MOVE AND MANEUVER THE
GAME. USE PROPER MOVING
EQUIPMENT AND EXTREME
CARE
WHILE
HANDLING.
STERN PINBALL MACHINES
WEIGH OVER 250LBS BOXED.
TOOLS REQUIRED
•
•
•
•
5/8” Socket Wrench
Utility Knife
Snips
A helper
2
2
5
7
5
7
1
6
1. Locate the side labeled “TRUCK
THIS SIDE ONLY”. The bottom of
the game faces this side.
2. Open the top box flaps by pulling
hard in an upward motion on each
flap. If the flaps are taped, cut the
tape first, taking care to avoid the
box staples.
8
8
3. Remove the four (4) foam pieces and two (2) narrow box tubes
which contain the four (4) identical
legs with levelers.
4. DO NOT CUT STRAPPING YET.
Keep backbox secured in the
down position.
5. With the utility knife, carefully cut
down the left and right corners of
the box.
6. Let the face fall forward and
remove the entire side by carefully
cutting the bottom.
7. With the game still in its folded
position, use a ⅝” wrench to loosen and remove the 2 leg bolts on
each side of the front cabinet. Ensure the leg levelers are screwed
all the way in to the legs.
15
14
9
11
14
11
8. Install front legs using the bolts
removed from Step 5. Secure
tightly.
9. Use a helper to carefully set the
game down on the front legs.
10. Set aside the open box.
11. With the ⅝” socket wrench, loosen
and remove the 2 leg bolts on
each side of the rear cabinet, 4
total.
12. Using supports or two people,
prop the rear of the cabinet up.
13. Ensure the rear leg levelers are
screwed all the way into the legs.
14. Install rear legs using the 4 bolts
removed from step 11.
3
SETUP AND MOVING
FIRST-TIME SETUP CONTINUED
21
17
19
15. Cut nylon strapping and remove
protective strap corner guards
16. Locate the factory keys, either on
the shooter rod or taped to the
playfield glass.
17. Using the snips, cut the tie-wrap
securing the keys if required. One
set of keys is for the front coin
door, the other set of keys is for
accessing components in the
backbox
18. Open the front coin door.
19. Reach into the game and remove
the retaining clip at the rear of the
cash box.
20. Remove the cash box lid by sliding
it toward you.
21. Store the backbox keys, if desired,
on the metal hook located in the
coin door.
22. Locate and remove the pinballs,
plumb bob, and backbox bolts
from the cash box.
23. Replace the cash box lid and
retaining clip for future use.
25
27
26
24. Locate the two (2) backbox bolts in
the cash box.
25. Carefully raise backbox to upright
position while ensuring that cables
are not pinched.
26. Use the ⅝” wrench to Install the
two (2) backbox bolts to secure the
backbox as indicated on the back
of the cabinet.
4
27. Reach inside the cabinet and
move and hold the yellow top
molding lock handle to the left.
28. Remove the front top molding and
then release the handle.
29. Remove the playfield glass by
sliding it toward you and carefully
place it in a safe location.
Remove all playfield shipping
tie downs, shipping blocks, and
packing foam, and follow any
game-specific unpacking instructions included in the playfield, if
present.
CAUTION: PLAYFIELD GLASS IS MADE FROM HIGH-STRENGTH TEMPERED
GLASS. TEMPERED GLASS IS SENSITIVE TO EXTREME TEMPERATURE SHIFTS
AND CORNER NICKS, WHICH CAN CAUSE THE GLASS TO FAIL CATASTROPHICALLY. TAKE CARE TO STORE THE GLASS ON A SOFT, ROOM-TEMPERATURE SURFACE AND PREVENT THE CORNERS FROM BEING DAMAGED.
SETUP AND MOVING
FIRST-TIME SETUP CONTINUED
30. If pinballs were already installed into the lower ball
trough, remove them before lifting the playfield.
31. Grasp the lower arch between the flippers, and firmly
but gently pull directly up to raise the playfield 8-12
inches.
32. While holding the playfield up, pull the playfield toward
you until the two playfield supports are over the front
edge of the cabinet.
33. Rest the playfield on the front edge of the cabinet.
34. Raise the playfield and rest it against the backbox.
35. Visually inspect all cabinet cables and connector terminations; ensure no wires or cables are pinched and that
cable harnesses are not pulled tight.
36. Locate the plumb bob in the parts bag in the cash box
37. Slide plumb bob onto the hanger wire. Note: the vertical
position of the plumb bob affects tilt sensitivity - higher
makes the game more sensitive to tilting.
38. Tighten the Thumb Screw finger-tight.
39. Install the correct number of pinballs. Refer to the decal
on the lock down assembly for the correct number of
pinballs.
LOCATING, LEVELING, AND FINAL SETUP
1. Select a location that is indoors, out of direct sunlight,
and climate controlled. Excessive moisture/humidity
can cause long-term damage to your game.
2. Adjust the front or rear levelers as necessary to position
the playfield level bubble, located on the front right of
the playfield next to the shooter lane, to float between
the two (2) black lines. This will place the playfield at
the recommended 6.5° pitch. Playfield angles greater
than 6.5° can be achieved by turning out the rear leg
leveler(s) for increased difficulty and faster gameplay.
3. Use a pinball to roll down the center of the playfield for
side-to-side leveling, or use an external bubble level,
digital level, or smartphone level app.
4. Plug into a grounded outlet and check for proper operation through DIAGNOSTICS.
5. Check the coin door: With the door closed, insert coins
to verify proper operation.
6. Play game: Check for satisfactory operation and adjust
game volume (push the Red Buttons inside the Coin
Door).
7. If desired, perform any game diagnostics, game adjustments, and pricing settings at this time.
5
SETUP AND MOVING
1.2 TRANSPORTING THE GAME
When transporting the game, such as in the back of a truck or with a hand truck, the
game’s backbox must be secured to prevent damage to the side rails.
1. SECURE THE BACKBOX
1. Ensure that the pinballs are removed from the playfield, and secure any free-moving mechanisms
that may get damaged in transport
TOOLS REQUIRED
• STRAP (500LB OR GREATER)
• A HELPER
• HAND TRUCK
CAUTION
NEVER TRANSPORT THE GAME IN A
MOVING VEHICLE WITH THE BACKBOX RAISED! TWO PEOPLE ARE REQUIRED TO REMOVE THE LEGS!
2. REMOVE THE LEGS AND
STAND UP
3
2
6
4
2. Remove the backbox securing
bolts
3. Carefully lower the backbox onto
the side rails. Use a piece of cardboard or suitable padding between
the backbox and the game.
4. Securely strap the back box to the
game
5. The game may be transported with
the legs on. If the legs must be removed, follow the remaining steps.
6. Remove the legs, rear legs first. Use
a stool or a friend to support the
rear of the game.
7. Rest the rear of the game on the
ground.
8
9
8. Stand the game up on its back.
6
9. Remove the front two legs.
10. Secure all loose parts and transport with a hand truck in the
upright position.
SETUP AND MOVING
1.3 MAINTENANCE
REGULAR MAINTENANCE - (MONTHLY/500
GAMES)
• Remove the playfield glass
• Enter the software diagnostics menu, start lamp test, then
clean and wax the playfield.
• While cleaning the playfield, identify and repair malfunctioning
lights, loose parts, cracked plastics and worn rubber parts.
• While in diagnostics, enter the switch test (Select the "SW"
Icon, then "TEST" Icon).
• Use a pinball to actuate all switches and verify the correct
switch registers with the switch test.
• The game will play a sound to confirm the switch.
• Lift the playfield and inspect all assemblies for loose parts,
broken wires or excessive wear. Look at the bottom of the
cabinet for any parts that may have worked loose, then find
the source.
• Check all coin door mechanisms and bill acceptor (if installed)
for proper operation
• Play the game to ensure all coils and features are working
• Check the playfield to ensure it is level and set to the proper
pitch using the bubble level on the right side wood rail.
• Check game audits: Replay % and Ball Time and note abnormal values which can indicate problems.
• Ensure game volume is set appropriately for the location.
• Clean both sides of the playfield glass and reinstall.
• Check and clean pinballs and replace if excessively worn or
scuffed. Dirty pinballs accelerate game wear.
OVERHAUL MAINTENANCE (5000 GAMES)
• Verify latest game software is installed
• Check flippers for excessive wear. Excessive flipper sloppiness (vertical or horizontal) or weakness indicates a flipper
rebuild is required.
• Clean machine inside and out and check leg levelers for free
operation.
• Visual check for loose or broken playfield and cabinet parts
and repair as necessary.
• Electrical check: Plug into grounded outlet and check for
proper operation through DIAGNOSTICS.
• Replace worn or dirty rubbers.
• Replace pinballs.
• Check all playfield switches with a pinball.
• Check all settings (refer to manual for factory settings).
• Check coin door: With door closed, insert coins to verify
proper operation.
• Check for proper adjustment of the plumb bob tilt.
• Play game: Check for satisfactory operation.
COMMON PINBALL TOOLS
•
•
•
•
•
•
•
•
•
•
•
Common nut drivers (¼”, 5/16”, 11/32", ⅜”)
Phillips screw driver
Standard Allen wrench/Hex key set
⅝” Socket with ratchet
Adjustable wrench (5/8" & 9/16")
6" Torpedo Level (or use a pinball
Flashlight or headlampv
Soldering Iron (60w with flat tip), lead-free solder
Wire cutter
Wire stripper
Long nose (“needle nose”) pliers
1.4 MAINTENANCE KITS
Description
KISS Pro Maintenance Kit
Part Number
502-6002-H1
• 8 oz pinball playfield wax (Novus # 2) (675-0003-01)
• Standard Pinball (260-5000-00)
• Cleaning Cloth
• All Playfield Rubber Rings
• Spare Fuses
KISS Pro Deluxe Maintenance Kit
502-6003-H1
• All standard kit items, plus:
• Flipper rebuild kits, Left and Right (500-6307-10,-00)
KISS Playfield Plastics Kit
KISS Playfield Decals Kit
KISS Playfield Decals Kit (Germany)
KISS Pro Cabinet Decal Left
KISS Pro Cabinet Decal Left (Germany)
KISS Pro Cabinet Decal Right
KISS Pro Cabinet Decal Right (Germany)
KISS Pro Cabinet Decal Left
KISS Pro Cabinet Decal Left (Germany)
KISS Pro Cabinet Decal Right
KISS Pro Cabinet Decal Right (Germany)
KISS Pro Cabinet Decal Front
KISS Pro Cabinet Decal Front (Germany)
KISS Pro Playfield, Bare
KISS Pro Playfield, Bare (Germany)
KISS Pro Translite
KISS Pro Translite (Germany)
803-5000-H1
802-5000-H1
802-5000-H1-GER
820-66H1-01
820-66H1-01G
820-66H1-02
820-66H1-02G
820-66H1-03
820-66H1-03G
820-66H1-04
820-66H1-04G
820-66H1-05
820-66H1-05G
830-5000-H1
830-5000-H1G
830-52H1-01
830-52H1-GER
1.5 COMMON PARTS
Description
8 oz Pinball Playfield wax (Novus # 2)
Standard Pinball, 1-1/16 in
Flipper Rebuild Kit Left (Standard)
Flipper Base Plate Kit Left
Flipper Rebuild Kit Right
Flipper Base Plate Kit Right
Part Number
675-0003-01
260-5000-00
500-6307-10
515-6617-01
500-6307-00
515-6617-00
7
SPIKE SYSTEM AND NODE GUIDE
2. SPIKE SYSTEM AND NODE GUIDE
2.1 SPIKE SYSTEM OVERVIEW
The SPIKE Pinball system is a rugged, distributed, and embedded platform custom-designed for the rigors of the pinball
machine environment. SPIKE takes advantage of modern technologies to deliver an immersive pinball experience that supports
modern features, reduces cabling, and increases serviceability
and reliability.
A Stern Pinball machine based on the SPIKE system will have at
least two nodes networked together with the SPIKE node bus,
a custom industrial pinball control bus that is designed around
industry standards and optimized for the pinball environment.
The primary CPU node is networked to one or more input/output
nodes over standard Category 5 UTP (unshielded twisted pair)
ethernet cabling.
There are five primary types of nodes that are found in the game.
• CPU node (Node 0) - The primary node that controls other
nodes in the system. Contains the primary game software
for the system and provides SPIKE node bus power for other
nodes.
• Cabinet 48V node (Node 1) - Specialized node with specific
inputs and outputs for coin doors, tilt mechanisms, and other
bottom-cabinet devices.
• 48V playfield node - Controls high power devices such
as coils and flashers, and also supports a few switch and
low-power outputs. Powered by the system 48V power
supply.
• Light and switch node - High-density switch and low-power
LED outputs, bus-powered from the node bus. These boards
contain as many 32 switch inputs and light outputs.
• Node extensions - These sub-nodes add additional low-power input and outputs to a specific Power or I/O node and are
connected with simple serial bus.
2.2 NODE BUS CABLING
The SPIKE node bus utilizes standard Ethernet-style RJ45 8-pin
modular jacks, and off-the-shelf Category 5e or better ethernet
cabling. The node bus is electrically different from Ethernet and
does not not utilize Ethernet or TCP/IP protocols or signaling
standards. SPIKE nodes are not compatible with standard computer networking equipment.
CAUTION: Plugging a SPIKE Node or CPU board into a standard
Ethernet port may damage one or both devices and void your
warranty.
2.3 SYSTEM POWER
The SPIKE System is powered from an 48V DC power supply
bus. Each SPIKE node converts this voltage to lower voltages
required by the node and its specific components. A SPIKE 48V
node typically controls high-power outputs such as game coil
mechanisms and high-brightness LEDs. These powered nodes
are supplied directly with 48V system power. SPIKE standard I/O
nodes are low-power nodes that read switch inputs and output
8
to standard-brightness LEDs. Standard I/O nodes use the node
bus power, which is supplied by the main CPU node over the
node bus modular jack connectors.
COIN-DOOR SAFETY INTERLOCK
To protect the system and for user safety, power to the playfield
is disabled when the front coin door is opened. 48V system power and 9V node bus power is disabled to all playfield components
until the switch is closed.
2.4 SPIKE NODE ADDRESSES
Each SPIKE node has a unique address ranging from 0 to 15. Not
all addresses are used in all games. Nodes can be of the same
part number, so the address is specified on the DIP switches on
each node. When replacing a node, be certain that the correct
address is set. Nodes can have 3-position and 4-position DIP
switches. Refer to the appropriate table to set the address for
each type of Node. The correct address for a node can be found
in the SPIKE node reference section of the manual or in the game
diagnostic software. Address 0 is reserved for the backbox CPU
node, where the game software resides. Address 1 is reserved for
the cabinet node, located inside the coin door. These two nodes
do not have DIP switches as their address is not configurable.
Address
8
9
10
11
12
13
14
15
1
OFF
OFF
OFF
OFF
ON
ON
ON
ON
2
OFF
OFF
ON
ON
OFF
OFF
ON
ON
3
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Figure 2.4.1. SPIKE node addresses for nodes with 3-position DIP
switches. Addresses 0-7 are not used by SPIKE nodes with 3-position DIP switches.
Address
8
9
10
11
12
13
14
15
1
OFF
OFF
OFF
OFF
ON
ON
ON
ON
2
OFF
OFF
ON
ON
OFF
OFF
ON
ON
3
OFF
ON
OFF
ON
OFF
ON
OFF
ON
4
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Figure 2.4.2. SPIKE node addresses for nodes with 4-position DIP
switches. Addresses 0-7 are reserved for fixed-function nodes and
do not require configuration.
2.5 SPIKE NODE PROGRAMMING
The SPIKE nodes are smart nodes that have on-board processors and run embedded code. The nodes are programmed
SPIKE SYSTEM AND NODE GUIDE
SPIKE SYSTEM AND NODE GUIDE CONTINUED
automatically by the CPU node whenever software updates are
installed to the CPU. When replacing a node, the CPU node will
detect and update the node to the latest software with no user
intervention. Always replace nodes with the power to the game
turned OFF.
2.6 SPIKE SYSTEM TERMINOLOGY
MULTI GENERAL ILLUMINATION LIGHTING
General Illumination Lighting is two or more lights powered by
one control source. These are often a number of LEDs connected in parallel and the system controls these as one large LED. A
missing LED will not affect these circuits, however a shorted LED
can cause the entire string of LEDs to turn off.
SINGLE LIGHTS
Single lights and LEDs are direct-controlled from SPIKE node
boards. A common power source is grounded by individual
transistors to turn individual LEDs on and off. Groups of LEDs,
usually by node connector, share a common power source, so if
a group of LEDs is out, check the wiring for the power source.
FLASHERS
INPUT/OUTPUT PROTECTIONS
SPIKE features built-in short-circuit, static electricity, and other
protections to maximize reliability. If an LED, coil or other device
shorts, it will be disabled but will not shut down the entire system
in most circumstances. Groups of LEDs, coils, and switches often
share common power supplies or other circuits, so it is possible
that a bad device will affect the group of related devices and
require removal or repair to fix the group. The system diagnostics
will inform the technician of shorted or otherwise malfunctioning
devices whenever possible. While the system is protected against
permanent damage, it is strongly recommended to repair or
replace these bad components as soon as possible to minimize
downtime and maximize game earnings.
FUSES
Nodes that have 48 V power are fused individually. Fuse voltage
ratings are a safety rating and always must be higher than the
circuit the fuse is protecting. Never replace a fuse with a lower
voltage-rated fuse. Fuse current ratings must be replaced with
the same current value. A higher current value fuse could cause
catastrophic failures, and a lower-value fuse will cause premature
fuse failures.
Common fuses
SPIKE games treat flashers the same as single LEDs that draw
more power. Flashers are controlled from the same circuits that
power regular lights.
DRIVERS
A driver is a circuit that controls a high power-device such as a
coil, magnet, or motor. Each device has a common 48V power
source that is then connected to ground by a dedicated control
transistor. Each driver is protected against shorting, static electricity, and over-current conditions. Take caution as 48V is always
present on a device even when it is not energized.
OPTOS
Certain types of optical switches (“optos”) require external signal
conditioning. For these optos, they will interface to a SPIKE node
via an opto signal conditioning board. Other optical switches
connect directly to the Spike node board.
System Protections
CAUTION: Unless explicitly directed by an Authorized Stern Repair technician, perform ALL work on your pinball machine with
the power disabled!
Fuse Rating (Amps)
3A
4A
5A
7A
8A
Type
Slow Blow MDL
Slow Blow MDL
Slow Blow MDL
Slow Blow MDL
Slow Blow MDL
Part Number
200-5000-08
200-5000-06
200-5000-01
200-5000-03
200-5000-05
CAUTION: Always replace fuses with the exact current specifications.
2.7 COMMON SPIKE NODE BOARDS
Description
SPIKE CPU Node
SPIKE CPU Node w/ Video Out Support (Backward compatible with -00)
Cabinet Node
48V 8-Driver Node
48V 4-Driver Node
SPIKE 32 Light and Switch Node
Trough Serial Opto Receiver Extension
Type
Node
Part Number
520-6936-00
Node
Node
Node
Node
Node
Extension
520-6936-10
520-5319-00
520-6935-00
520-5329-00
520-5322-00
520-5345-00
9
LIGHT, SWITCH, AND DRIVER REFERENCE
NODE BOARD
INSTRUCTION
SHEET
3. LIGHT, SWITCH,
AND ID
DRIVER
REFERENCE
KISS PRemIum/LE
1
1
CN23
CN7
SD CARD
1
D28 D29 D30 D13
+48V
48V
24V
9V
5V
CN24
BT1
BATTERY
RESET
1
1
HEADPHONE
AMPLIFIED AUDIO
OUT
CN18
CN4
CN1
CPU NODE 0
C+ C- L+ L-
R+ R-
NETSTAT
TxD
RxD
S1
520-6936-00A
SPIKE CPU
1
CN1
CN14
CN3
DIP S2
USB
CN21
NODE 9a
NODE 0
CN25
STATUS
LINE
OUT
PLAYFIELD FRONT
GND
SCL
SDA
RST
POWER IN
BACKBOX
NODE 8
CN2
SPIKE NODE BUS
CN3
CN22
CN3
CN20
NODE 9
CN22
CN14
CN2
CN3
NODE 10a
CN2
1
CN6
CABINET
CN11
Node Bus Cable (RJ45)
1
TICKET
LEDS
STERN
Pinball
CN9
INPUTS
CABINET LEFT
CN13
DBA
1
1
MENU BUTTONS
When replacing node boards,
ensure DIP address switches
are set correctly!
1
POWER
CN8
CABINET RIGHT
CN7
FLIPPER
METER 2
METER 1
CN3
1
CN4
CN10
520-5319-00F
Cabinet Node
3A 125V
TIME LAG FUSE
COIN DOOR
CN1
TO CPU
CN5
1
1
LEDS
CN14
1
1
CABINET NODE 1
CN14
CN10
SHAKER MOTOR
INPUTS
CN2
Serial Data Cable
CN12
1
NODE 10
NODE 11
CN13
FLIPPER
CN2
CN3
CN9
PLAYFIELD REAR
ID
DIP Address
Description
3.1
SPIKE
NODE BOARDS
Node 0 n/a
SPIKE CPU Node
ID
DIP SW1 Address
Description
Node 1 n/a
Cabinet Node
0
n/a
SPIKE CPU Node
Node 8 OFF-OFF-OFF-OFF Lower Playfield 48V 8-Driver Node
1 Node
n/a 9
CabinetMid
NodePlayfield 48V 8-Driver Node
OFF-OFF-ON-OFF
8 Node
OFF-OFF-OFF-OFF
Lower Playfield
8-Driver48V
Node8-Driver Node
10 OFF-ON-OFF-OFF
Upper 48V
Playfield
Mid Right
Playfield
32 Lighting and Switch
8a Node
n/a 11 OFF-ON-ON
Trough Serial
Opto Receiver
Extension
n/a
Trough
9 8aOFF-OFF-ON-OFF
Mid Playfield
48V Serial
8-DriverOpto
Node Receiver Extension
9a
n/a
ASSY Star Grid LED
10 10a
OFF-ON-OFF-OFF
Upper Playfield
48V 8-Driver
Node
n/a
ASSY Star
LED Board
11 755-7512-H2
OFF-ON-ON
Upper Playfield S/L I/O Node
9a
n/a
ASSY Star Grid LED
10a n/a
ASSY Star LED Board
Location
Part Number
Backbox
520-6936-00
Location
Part Number
Cabinet
520-5319-00
Backbox
520-6936-00
Lower playfield
520-6935-00
Cabinet
520-5319-00
Mid playfield
520-6935-00
playfield
520-6935-00
Upper Lower
playfield
520-6935-00
Backbox
520-5322-00
Lower playfield ball trough
520-5345-01
Lower Mid
playfield
playfield(ball trough) 520-5345-01
520-6935-00
Lower playfield
520-6969-01
Upper playfield
520-6935-00
Mid playfield
520-6970-00
Upper
playfield
© 2015
KISS Catalog, Ltd.
Lower playfield
Mid playfield
520-5322-00
Under License to Epic
Rights.
520-6969-01
520-6970-00
3.2 DRIVER REFERENCE
ID
Name
1
2
3
4
Trough
Auto Plunger
4-Bank Drop Reset
1-Bank Drop Reset
Node Connector Ret.
Pin
8
CN8
5
8
CN6
5
10
CN11
3
9
CN9
3
Ret. Wire
Voltage V+ Pin V+ Color
Location Type
Address
Part Number
ORG-GRY
ORG-WHT
BLU-YEL
YEL-WHT
48V
48V
48V
48V
Playfield
Playfield
Playfield
Playfield
8-DR-5
8-DR-4
10-DR-3
9-DR-2
090-5004-ND
090-5001-ND
090-5034-ND
090-5034-ND
6
6
4
4
GRY-ORG
GRY-ORG
GRY-BRN
GRY-BLK
Coil - 27-1500
Coil - 23-800
Coil - 25-1240
Coil - 25-1240
Continued on next page...
10
W
BD.#10
A
-24
W
-24
R
-18
-29
-13
.062
DEEP
BOTTOM
BD.#11
R
B
B
W
.062
DEEP
BOTTOM
DRIVER REFERENCE
R
ITE
ITE
WH
R
WH
T
ITE
R
WH
S
W
ITE
WH
B
TE
W
W
ROUT
.125
DEEP
WHI
ROUT
.125
DEEP
ROUT
.070
DEEP
B
W
B
R
NEW
SUPER
JACKPOT
CLEAR
AR
CLE
R
CLEA
LITE AGE
ST
BACK
PASS
SU
JACCLEAPER
KRPO
T
CLEAR
CLEAR
LITE
CAT
BUMP
ER
WHITE
ECT
COLL MENT
RU
GE
LITE
R
CLEA
WHITE
L
O
C
K
YELLOW
ARMY
MILLIONS
TE
WHI
L
O
C
K
GREEN
RED
RED
RED
RED
GE
ORAN
LITE
DEMO
BUMP N
WHI ER
TE
RED
CLEA
R
L
O
C
K
B
GREEN
OR
AN
R
LL
A
AB
CL
RO
CK
Y
RM
SA
ST
WHAR
ITET
LIO
WHI
TE
N TA
RGET
S
BA
LL
EA
W
LLO
YE
KISS
MIL
-06
TR
EX
GE
DA
R
COLLECT
INSTRUM
ENT
CIT
KIS
Y
ORANGE
LO
E
GUV
N
R
MUL
W
A
AD
TIBA
LL
YELLOW
A
B
CO
INS LLECT
TRUM
ENT
R
E
MB
R
LITE
STAR
BUMP
ER
WHITE
WHI
TE
ORANGE
ECT
COLL MENT
RU
INST
TE
LIT
SPACE
BUMP E
ER
WHITE
LITE
GREEN
COLLECT
INSTRUMENT
WHI
CLEAR
-01
ORAN
ROUT
.070
DEEP
INST
YELLOW
B
ITE
W
R
WH
YELLOW
M
W
BD.#9
YELLOW
W
CLEAR
CLEAR
-29
CLEAR
CLEAR
CLEAR
CLEAR
CLEAR
WHITE
WHITE
WHITE
WHITE
YELLOW
LITE
ARMY
DOUBLE
KISS
WHITE
CLEAR
R
M
CLEAR
RED
Y
B
B
-20
.093 DEEP
TOP
CLEAR
A
R
CLEAR
R
M SHAPE
AMBER
.062
DEEP
BOTTOM
.062
DEEP
BOTTOM
TARGETS
WHITE
WHITE
W
.093 DEEP
TOP
.093 DEEP
TOP
BONUS
-29
W
W
3X
ORANGE
COLOSSAL
R
B
W
ORANGE
.062
DEEP
BOTTOM
GREEN FILTER
2X
.062
DEEP
BOTTOM
.062
DEEP
BOTTOM
RED FILTER
B
R
.093 DEEP
TOP
WHITE
BLUE FILTER
.062
DEEP
BOTTOM
WHITE
PURPLE FILTER
.093 DEEP
TOP
LITE
BUMPER
SHOT
WHITE
STAR LE
COIL MAP
Y
CLEAR
CLEAR
r
r ba
colo
VISIBLE AREA
INSIDE DASHED LINE
ROCK
AMBER
AGAIN
VISIBLE AREA
INSIDE DASHED LINE
BD.#8
-20
.062
DEEP
BOTTOM
-19
Figure 3.2.1. Playfield top component view
11
DRIVER REFERENCE CONTINUED
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
1-Bank Drop Trip
Up Left Sling
Up Right Sling
Shaker Motor
Left Pop Bumper
Right Pop Bumper
Bottom Pop Bumper
Top Pop Bumper
Diverter Hold
Left Flipper
Right Flipper
Left Sling
Right Sling
Paul Dance
Left Flipper Hold
Right Flipper Hold
Eject
Vertical Upkick
Scoop
Diverter Main
Lock Release
Motor - Ball Left
Motor - Ball Right
Motor - Spin Disc 1
Motor - Spin Disc 2
Meter 1
Meter 2
Ticket Dispenser
9
9
9
1
9
9
9
9
10
8
8
8
8
10
8
8
10
10
10
10
10
10
10
10
10
1
1
1
CN11
CN5
CN7
CN2
CN6
CN8
CN10
CN12
CN10
CN5
CN7
CN12
CN10
CN6
CN9
CN11
CN5
CN7
CN9
CN8
CN12
10a-CN9
10a-CN9
10a-CN9
10a-CN9
CN3
CN4
CN11
3
3
3
1
5
5
5
5
5
3
3
5
5
5
3
3
3
3
3
5
5
2
3
4
5
2
2
3
YEL-VIO
YEL-BLU
YEL-GRY
BLU
ORG-BLK
ORG-BRN
ORG-RED
ORG
BLU-RED
ORG-YEL
ORG-GRN
ORG-BLU
ORG-VIO
BLU BLK
YEL-ORG
YEL-GRN
YEL-BLK
YEL-BRN
YEL-RED
BLU-BRN
BLU-ORG
BLU-BRN
BLU-RED
BLU-ORG
BLU-YEL
BLK
BLK
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
48V
5V
5V
5V
5V
12V
12V
12V
4
4
4
5
6
6
6
6
CN8-6
4
4
6
6
6
4
4
4
4
4
6
6
1
1
1
1
1
1
1
GRY-BLK
GRY-BLK
GRY-BLK
RED
GRY-BLK
GRY-BLK
GRY-BLK
GRY-BRN
GRY-BRN
GRY-ORG
GRY-ORG
GRY-ORG
GRY-ORG
GRY-BRN
GRY-ORG
GRY-ORG
GRY-BRN
GRY-BRN
GRY-BRN
GRY-BRN
GRY-BRN
RED
RED
RED
RED
RED
RED
Playfield
Playfield
Playfield
Cabinet
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Cabinet
Cabinet
Cabinet
Coil - 32-1800
Coil - 26-1200
Coil - 26-1200
Motor
Coil - 26-1200
Coil - 26-1200
Coil - 26-1200
Coil - 26-1200
Coil - 31-4000
Coil - 24-850
Coil - 24-850
Coil - 26-1200
Coil - 26-1200
Coil - 31-3500
Coil - 31-3500
Coil - 26-1200
Coil - 23-800
Coil - 23-800
Coil - 26-1200
Coil - 26-1200
Motor
Motor
Digital Out
Digital Out
Digital Out
9-DR-3
9-DR-0
9-DR-1
1-DR-0
9-DR-4
9-DR-5
9-DR-6
9-DR-7
10-DR-6
8-DR-0
8-DR-1
8-DR-7
8-DR-6
10-DR-4
8-DR-2
8-DR-3
10-DR-0
10-DR-1
10-DR-2
10-DR-5
10-DR-7
10-LP-39
10-LP-40
10-LP-41
10-LP-42
1-DR-2
1-DR-3
1-DR-4
515-9702-01-ND
090-5044-ND
090-5044-ND
041-5029-04
090-5044-ND
090-5044-ND
090-5044-ND
090-5044-ND
090-5083-00-ND
090-5083-03-ND
090-5083-03-ND
090-5044-ND
090-5044-ND
511-7672-00
090-5083-03-ND
090-5083-03-ND
090-5044-ND
090-5001-ND
090-5001-ND
090-5083-00-ND
090-5044-ND
041-5129-00
041-5029-04
500-9946-00
500-9946-00
3.3 SWITCH REFERENCE
ID
Name
Conn. Input
Pin
CN7 3
CN1 6
CN7 2
CN1 7
CN12 4
CN10 4
CN9 2
CN11 2
CN7 5
CN6 9
CN14 -
Input Wire GND
Pin
WHT-RED 10
TAN-GRN 10
WHT-BRN 10
TAN-BLU 10
GRY-BLU 3
GRY-VIO
3
GRY-BRN 1
GRY-RED 1
WHT-YEL 10
GRY-WHT 5
-
Ground
Wire
BLK-VIO
BLK-ORG
BLK-VIO
BLK-ORG
BLK-GRN
BLK-GRN
BLK-GRN
BLK-GRN
BLK-VIO
BLK-WHT
-
Location
Type
Address
Part Number
1
2
3
4
5
6
10
11
14
15
16
Node Node
Ext
Left Return Lane (L)
11
Right Return Lane
11
Left Outlane
11
Right Outlane
11
Left Slingshot
8
Right Slingshot
8
Left Flipper Button
8
Right Flipper Button
8
Left Orbit
11
Tournament Start Button 1
Trough 6
8
8a
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Cabinet
Cabinet
Playfield
Cabinet
Playfield
Rollover
Rollover
Rollover
Rollover
Leaf
Leaf
Leaf
Leaf
Rollover
Micro
Opto
11-SW-1
11-SW-28
11-SW-0
11-SW-29
8-SW-7
8-SW-6
8-SW-2
8-SW-3
11-SW-3
1-SW-12
8a-SW-9
17
Trough 5
8
8a
CN14 -
-
-
-
Playfield
Opto
8a-SW-10
18
Trough 4
8
8a
CN14 -
-
-
-
Playfield
Opto
8a-SW-11
19
Trough 3
8
8a
CN14 -
-
-
-
Playfield
Opto
8a-SW-12
20
Trough 2
8
8a
CN14 -
-
-
-
Playfield
Opto
8a-SW-13
21
Trough 1
8
8a
CN14 -
-
-
-
Playfield
Opto
8a-SW-14
500-9935-04
500-9935-03
500-9935-04
500-9935-04
180-5231-00
180-5231-00
500-5160-01
500-5160-01
500-9935-04
180-5174-00
520-5344-00 tx
520-5345-01 rx
520-5344-00 tx
520-5345-01 rx
520-5344-00 tx
520-5345-01 rx
520-5344-00 tx
520-5345-01 rx
520-5344-00 tx
520-5345-01 rx
520-5344-00 tx
520-5345-01 rx
12
SWITCH REFERENCE CONTINUED
ID
Name
Location
Type
Address
Part Number
Trough Jam
Node Node Conn. Input Input Wire GND Ground
Ext
Pin
Pin Wire
8
8a
CN14 -
22
Playfield
Opto
8a-SW-15
23
24
25
26
27
28
30
31
32
33
34
Shooter Lane
Right Orbit
(S)tar Target
S(t)ar Target
St(a)r Target
Sta(r) Target
Left Pop Bumper
Right Pop Bumper
Bottom Pop Bumper
Top Pop Bumper
Star Entrance Opto
8
11
11
11
11
11
9
9
9
9
9
-
CN6
CN3
CN7
CN7
CN7
CN7
CN6
CN8
CN10
CN12
CN11
4
9
6
7
8
9
4
4
4
4
2
GRY-WHT
PNK-VIO
WHT-GRN
WHT-BLU
WHT-VIO
WHT-GRY
LGN-BLK
LGN-BRN
LGN-RED
LGN-ORG
LGN-GRY
3
10
10
10
10
10
3
3
3
3
1
BLK-GRN
BLK-RED
BLK-VIO
BLK-VIO
BLK-VIO
BLK-VIO
BLK-BRN
BLK-BRN
BLK-BRN
BLK-BRN
BLK-BRN
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Rollover
Rollover
Leaf, Target
Leaf, Target
Leaf, Target
Leaf, Target
Leaf
Leaf
Leaf
Leaf
Opto
8-SW-4
11-SW-23
11-SW-4
11-SW-5
11-SW-6
11-SW-7
9-SW-4
9-SW-5
9-SW-6
9-SW-7
9-SW-3
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
Up Left Sling
Up Right Sling
1 Bank Drop Opto
4 Bank Drop (K)iss
4 Bank Drop K(i)ss
4 Bank Drop Ki(s)s
4 Bank Drop Kis(s)
Vuk
Scoop
Left Lock Target
Right Lock Target
Left Return Lane (R)
Eject
Spinner
Demon Entrance Opto
9
9
9
10
10
10
10
10
10
11
11
11
10
10
11
-
CN5
CN7
CN9
CN6
CN8
CN10
CN12
CN7
CN9
CN5
CN5
CN7
CN5
CN11
CN5
2
2
2
4
4
4
4
2
2
2
3
4
2
1
4
LGN-YEL
LGN-BLU
LGN-VIO
WHT-BRN
WHT-RED
WHT-ORG
WHT-YEL
WHT-BLU
WHT-VIO
LGN-BLK
LGN-BRN
WHT-ORG
WHT-GRN
WHT-GRY
LGN-RED
1
1
1
3
3
3
3
1
1
10
10
10
1
1
10
BLK-BRN
BLK-BRN
BLK-BRN
BLK-BLU
BLK-BLU
BLK-BLU
BLK-BLU
BLK-BLU
BLK-BLU
BLK-GRY
BLK-GRY
BLK-VIO
BLK-BLU
BLK-BLU
BLK-GRY
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Leaf
Leaf
Opto
Leaf, Target
Leaf, Target
Leaf, Target
Leaf, Target
Rollover
Rollover
Leaf, Target
Leaf, Target
Rollover
Micro
Micro
Opto
9-SW-0
9-SW-1
9-SW-2
10-SW-4
10-SW-5
10-SW-6
10-SW-7
10-SW-1
10-SW-2
11-SW-8
11-SW-9
11-SW-2
10-SW-0
10-SW-3
11-SW-10
50
Lock 1
11
-
CN5
5
LGN-ORG
10
BLK-GRY
Playfield
Opto
11-SW-11
51
Lock 2
11
-
CN5
6
LGN-YEL
10
BLK-GRY
Playfield
Opto
11-SW-12
52
Lock 3
11
-
CN5
7
LGN-BLU
10
BLK-GRY
Playfield
Opto
11-SW-13
53
54
56
57
58
59
60
61
62
Motor Home
Motor Away
Right Ramp Exit
Right Ramp Backpanel
(A)rmy Target
A(r)my Target
Ar(m)y Target
Arm(y) Target
Start Button
11
11
11
11
11
11
11
11
1
-
CN3
CN3
CN3
CN3
CN1
CN1
CN1
CN1
CN6
4
5
7
8
2
3
4
5
10
PNK-RED
PNK-ORG
PNK-GRN
PNK-BLU
TAN-BLK
TAN-RED
TAN-ORG
TAN-YEL
GRY
10
10
10
10
10
10
10
10
5
BLK-RED
BLK-RED
BLK-RED
BLK-RED
BLK-ORG
BLK-ORG
BLK-ORG
BLK-ORG
BLK-WHT
Backpanel
Backpanel
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Cabinet
Micro
Micro
Micro
Micro
Leaf, Target
Leaf, Target
Leaf, Target
Leaf, Target
Micro
11-SW-18
11-SW-19
11-SW-21
11-SW-22
11-SW-24
11-SW-25
11-SW-26
11-SW-27
1-SW-11
64
65
66
67
68
69
70
Left Ramp Exit
Left Flipper Eos
Right Flipper Eos
Left Coin
Right Coin
Center Coin
Fourth Coin
11
8
8
1
1
1
1
-
CN3
CN5
CN7
CN5
CN5
CN5
CN5
3
2
2
9
8
7
6
PNK-BRN
GRY-YEL
GRY-GRN
PNK-BRN
PNK-RED
PNK-ORG
-
10
1
1
3
3
3
-
BLK-RED
BLK-GRN
BLK-GRN
BLK
BLK
BLK
-
Playfield
Playfield
Playfield
Cabinet
Cabinet
Cabinet
Cabinet
Micro
Leaf
Leaf
Micro
Micro
Micro
-
11-SW-17
8-SW-0
8-SW-1
1-SW-16
1-SW-18
1-SW-17
1-SW-19
520-5344-00 tx
520-5345-01 rx
180-5157-01
500-9935-03
515-9783-00-00
515-9783-00-00
515-9783-00-00
515-9783-00-00
180-5232-00
180-5232-00
180-5232-00
180-5232-00
515-0215-00 tx
515-0215-01 rx
180-5231-00
180-5231-00
520-5252-01
520-5252-14
520-5252-14
520-5252-14
520-5252-14
180-5209-00
180-5057-00
515-9785-00-00
515-9785-00-00
500-9935-04
180-5186-01
180-5010-04
515-0215-00 tx
515-0215-01 rx
515-0215-00 tx
515-0215-01 rx
515-0215-00 tx
515-0215-01 rx
515-0215-00 tx
515-0215-01 rx
180-5119-02
180-5119-02
180-5087-00
180-5010-04
515-9783-00-00
515-9783-00-00
515-9783-00-00
515-9783-00-00
500-6338-44LED
180-5087-00
180-5149-00
180-5149-00
Figure 3.3.1. Playfield switch locations (top view).
13
14
ID
Name
71
72
73
Fifth Coin
Tilt Pendulum
Launch Button (Reserved)
Ticket Notch
Slam Tilt
Dip 1
Service Plus
Service Minus
Service Back
Power Interlock Sense
Dip 2
Dip 3
Dip 4
Dip 5
Dip 6
Dip 7
Dip 8
Service Select
76
77
C1
C10
C11
C12
C16
C2
C3
C4
C5
C6
C7
C8
C9
Node Node
Ext
1
1
1
-
Conn. Input
Pin
CN5 5
CN6 7
CN7 8
Input Wire GND
Pin
WHT
5
PNK-BLU 5
Ground
Wire
BLK-WHT
BLK
Location
Type
Address
Cabinet
Cabinet
Cabinet
Plumb Bob
Micro
1-SW-20
1-SW-14
1-SW-2
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
CN11
CN5
CN25
CN25
CN25
CN7
CN25
LGN-RED
LGN-VIO
LGN-BLU
LGN-BLK
GRY-RED
LGN-GRY
BLK
BLK-WHT
BLK-WHT
BLK-WHT
BLK
BLK-WHT
Cabinet
Cabinet
CPU Node
Coin Door
Coin Door
Coin Door
Cabinet
Interlock
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
Coin Door
-
5
4
2
3
4
4
1
3.4 LIGHT REFERENCE
ID
Name
1
2
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Start Button
Tournament Button
Left Outlane
Left Return Lane(L)
Left Return Lane(R)
Bonus (K)ISS-RED
Bonus (K)ISS-GRN
Bonus (K)ISS-BLU
Bonus K(I)SS-RED
Bonus K(I)SS-GRN
Bonus K(I)SS-BLU
Bonus KI(S)S-RED
Bonus KI(S)S-GRN
Bonus KI(S)S-BLU
Bonus KIS(S)-RED
Bonus KIS(S)-GRN
Bonus KIS(S)-BLU
Bonus (A)RMY-RED
Bonus (A)RMY-GRN
Bonus (A)RMY-BLU
Bonus A(R)MY-RED
Bonus A(R)MY-GRN
Bonus A(R)MY-BLU
Bonus AR(M)Y-RED
Bonus AR(M)Y-GRN
Bonus AR(M)Y-BLU
Bonus ARM(Y)-RED
Bonus ARM(Y)-GRN
Bonus ARM(Y)-BLU
Node Node
Ext.
1
1
11
11
11
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9a
9
9
9a
Conn.
CN6
CN6
CN8
CN8
CN8
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
Ret.
Pin
3
2
8
9
10
-
3
11
11
11
1
11
Ret. Wire
YEL BRN
YEL RED
BRN GRN
BRN BLU
BRN VIO
-
Src.
Pin
1
1
2/3
2/3
2/3
-
Src.
Wire
RED
RED
RED
RED
RED
-
Location Type
Cabinet
Cabinet
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Part Number
1-SW-8
1-SW-21
0-SW-0
0-SW-10
0-SW-11
0-SW-12
0-SW-16
0-SW-2
0-SW-3
0-SW-4
0-SW-5
0-SW-6
0-SW-7
0-SW-8
0-SW-9
Light
Color
White
White
White
White
White
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
180-5192-02
180-5192-02
180-5192-00
180-5136-00
180-5192-04
Address
Part Number
1-LP-2
1-LP-3
11-LP-28
11-LP-29
11-LP-30
9a-LP-38
9a-LP-39
9a-LP-40
9a-LP-35
9a-LP-36
9a-LP-37
9a-LP-26
9a-LP-27
9a-LP-28
9a-LP-29
9a-LP-30
9a-LP-31
9a-LP-44
9a-LP-45
9a-LP-46
9a-LP-32
9a-LP-33
9a-LP-34
9a-LP-23
9a-LP-24
9a-LP-25
9a-LP-20
9a-LP-21
9a-LP-22
112-5033-08
112-5033-08
520-5307-00
520-5307-00
520-5307-00
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
15
LIGHT REFERENCE CONTINUED
ID
Name
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
78
79
80
81
82
83
84
85
86
Bonus Pop Starchild-RED
Bonus Pop Starchild-GRN
Bonus Pop Starchild-BLU
Bonus Pop Spaceman-RED
Bonus Pop Spaceman-GRN
Bonus Pop Spaceman-BLU
Bonus Pop Demon-RED
Bonus Pop Demon-GRN
Bonus Pop Demon-BLU
Bonus Pop Catman-RED
Bonus Pop Catman-GRN
Bonus Pop Catman-BLU
Bonus Inst. Starchild-RED
Bonus Inst. Starchild-GRN
Bonus Inst. Starchild-BLU
Bonus Inst. Spaceman-RED
Bonus Inst. Spaceman-GRN
Bonus Inst. Spaceman-BLU
Bonus Inst. Demon-RED
Bonus Inst. Demon-GRN
Bonus Inst. Demon-BLU
Bonus Inst. Catman-RED
Bonus Inst. Catman-GRN
Bonus Inst. Catman-BLU
Bonus Starchild
Bonus Spaceman
Bonus Demon
Bonus Catman
Bonus 2X
Bonus 3X
Bonus COLOSSAL
ROCK AGAIN
Right Return Lane
Right Outlane
(K)ISS
K(I)SS
KI(S)S
KIS(S)
Extra Ball
KISS ARMY
Backstage Pass-LT
Backstage Pass-RT
ROCK CITY
New Track
BOT Pop bumper-RED
BOT Pop bumper-GRN
BOT Pop bumper-BLU
LT Pop bumper-RED
LT Pop bumper-GRN
LT Pop bumper-BLU
TOP Pop bumper-RED
TOP Pop bumper-GRN
TOP Pop bumper-BLU
16
Node Node
Ext.
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9
9a
9a
9
9
9a
9
9a
9
9a
9
9a
10
10a
10
10a
11
11
11
11
11
11
11
11
10
10a
10
10a
11
11
11
11
11
11
11
11
11
-
Conn.
Ret.
Pin
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
9a-CN3 2
9a-CN3 3
10a-CN8 4
10a-CN8 5
CN8
4
CN8
5
CN8
6
CN8
7
CN6
10
CN6
11
CN4
10
CN4
11
CN14
CN14
CN4
4
CN4
5
CN4
6
CN2
4
CN2
5
CN2
6
CN4
7
CN4
8
CN4
9
Ret. Wire
ORG GRN
ORG BLU
BRN YEL
BRN GRN
BRN BLK
BRN RED
BRN ORG
BRN YEL
ORG BLU
ORG VIO
ORG BLK
ORG BRN
RED YEL
GRN YEL
BLU YEL
RED BRN
GRN BRN
BLU BRN
RED GRN
GRN
BLU GRN
Src.
Pin
4
4
8
8
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
Src.
Wire
YEL
YEL
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
Location Type
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Light
Color
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
White
White
White
White
White
White
White
White
White
White
White
White
White
White
White
White
White
White
White
White
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Address
Part Number
9a-LP-47
9a-LP-48
9a-LP-49
9a-LP-41
9a-LP-42
9a-LP-43
9a-LP-17
9a-LP-18
9a-LP-19
9a-LP-14
9a-LP-15
9a-LP-16
9a-LP-53
9a-LP-54
9a-LP-55
9a-LP-50
9a-LP-51
9a-LP-52
9a-LP-8
9a-LP-9
9a-LP-10
9a-LP-11
9a-LP-12
9a-LP-13
9a-LP-61
9a-LP-58
9a-LP-57
9a-LP-56
9a-LP-59
9a-LP-60
9a-LP-62
9a-LP-63
10-LP-61
10-LP-62
11-LP-24
11-LP-25
11-LP-26
11-LP-27
11-LP-22
11-LP-23
11-LP-14
11-LP-15
10-LP-15
10-LP-17
11-LP-8
11-LP-9
11-LP-10
11-LP-0
11-LP-1
11-LP-2
11-LP-11
11-LP-12
11-LP-13
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-6969-01
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-6970-00
520-6970-00
520-6971-00
520-6971-00
520-6971-00
520-6971-00
520-6971-00
520-6971-00
520-6971-00
520-6971-00
520-6971-00
Continued on next page
W
B
B
W
.062
DEEP
BOTTOM
-24
A
-24
W
R
R
-29
-13
BD.#10
-18
.062
DEEP
BOTTOM
BD.#11
R
ITE
ITE
WH
R
WH
T
ITE
R
WH
S
W
ITE
WH
B
TE
W
W
ROUT
.125
DEEP
WHI
ROUT
.125
DEEP
ROUT
.070
DEEP
B
W
B
R
NEW
SUPER
JACKPOT
CLEAR
AR
CLE
R
CLEA
E
LITE
STAG
BACK
PASS
SU
JACCLEAPER
KRPO
T
CLEAR
CLEAR
LITE
CA
BUMPT
ER
WHITE
ECT
COLL MENT
RU
GE
LITE
R
CLEA
WHITE
L
O
C
K
YELLOW
ARMY
MILLIONS
ITE
WH
L
O
C
K
GREEN
RED
RED
RED
RED
GE
ORAN
LITE
DEMO
BUMP N
WHI ER
TE
RED
CLEA
R
L
O
C
K
B
GREEN
OR
AN
R
L
CL
T
EX
W
LLO
YE
Y
RM
SA
EA
KIS
STAR
WHITET
MIL
LION
S
WHI
TE
TARG
ETS
BA
LL
-06
AL
B
RA
GE
DA
R
RO
CK
COLLECT
INSTRUM
ENT
CIT
KIS
Y
ORANGE
LO
E
GUV
N
R
MUL
W
A
AD
TIBA
LL
YELLOW
A
B
CO
INST LLECT
RUME
NT
R
E
MB
R
LITE
STAR
BUMP
ER
WHITE
WHI
TE
ORANGE
ECT
COLL MENT
RU
INST
TE
LIT
SPACE
BUMP E
ER
WHITE
LITE
GREEN
COLLECT
INSTRUMENT
WHI
CLEAR
-01
ORAN
ROUT
.070
DEEP
INST
YELLOW
B
ITE
W
R
WH
YELLOW
W
M
BD.#9
YELLOW
W
CLEAR
CLEAR
-29
Y
CLEAR
CLEAR
CLEAR
CLEAR
CLEAR
CLEAR
WHITE
WHITE
WHITE
WHITE
YELLOW
LITE
ARMY
DOUBLE
KISS
WHITE
CLEAR
CLEAR
CLEAR
A
R
M
Y
.062
DEEP
BOTTOM
RED
B
B
-20
.093 DEEP
TOP
CLEAR
R
M SHAPE
AMBER
R
.062
DEEP
BOTTOM
TARGETS
WHITE
WHITE
W
.093 DEEP
TOP
.093 DEEP
TOP
BONUS
-29
W
W
3X
ORANGE
COLOSSAL
R
B
W
ORANGE
.062
DEEP
BOTTOM
GREEN FILTER
2X
.062
DEEP
BOTTOM
.062
DEEP
BOTTOM
RED FILTER
B
R
.093 DEEP
TOP
WHITE
BLUE FILTER
.062
DEEP
BOTTOM
WHITE
PURPLE FILTER
.093 DEEP
TOP
LITE
BUMPER
SHOT
WHITE
CLEAR
ar
rb
colo
VISIBLE AREA
INSIDE DASHED LINE
ROCK
AMBER
AGAIN
VISIBLE AREA
INSIDE DASHED LINE
BD.#8
-20
.062
DEEP
BOTTOM
-19
Continued on next page
17
ID
Name
87
88
89
90
91
92
93
94
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
RT Pop bumper-RED
RT Pop bumper-GRN
RT Pop bumper-BLU
LT Orbit Arrow-RED
LT Orbit Arrow-GRN
LT Orbit Arrow-BLU
Super Bumpers
Collect Catman Inst.
(S)TAR
S(T)AR
ST(A)R
STA(R)
Starchild Arrow-RED
Starchild Arrow-GRN
Starchild Arrow-BLU
Starchild
Collect Starchild Inst.
LT Ramp Arrow-RED
LT Ramp Arrow-GRN
LT Ramp Arrow-BLU
Spaceman
ARMY
Collect Spaceman Inst.
Demon Arrow-RED
Demon Arrow-GRN
Demon Arrow-BLU
LT Lock target
Demon
RT Lock target
(D)EMON
D(E)MON
DE(M)ON
DEM(O)N
DEMO(N)
LOCK
Collect Demon Inst.
RT Ramp Arrow-RED
RT Ramp Arrow-GRN
RT Ramp Arrow-BLU
Super Targets
LOVE GUN
Lite Inst. RT ramp
RT Orbit Arrow-RED
RT Orbit Arrow-GRN
RT Orbit Arrow-BLU
RT Orbit Catman
RT Orbit Spaceman
RT Orbit Starchild
RT Orbit Demon
Catman
(A)RMY
A(R)MY
18
Node Node
Ext.
11
11
11
11
11
11
11
11
9
9
9
9
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10a
10
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
10
10a
Conn.
CN2
CN2
CN2
CN6
CN6
CN6
CN6
CN6
CN6
CN8
CN10
CN12
10a-CN7
10a-CN7
10a-CN7
CN14
CN14
10a-CN7
10a-CN7
10a-CN7
CN14
CN14
CN14
10a-CN7
10a-CN7
10a-CN7
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
CN14
10a-CN6
10a-CN6
10a-CN6
10a-CN6
10a-CN6
CN14
CN14
CN14
CN14
10a-CN8
Ret.
Pin
7
8
9
4
5
6
7
8
1
1
1
1
7
8
9
4
5
6
1
2
3
1
2
3
4
5
1
Ret. Wire
RED ORG
GRN ORG
BLU ORG
RED GRY
GRN GRY
BLU GRY
ORG RED
ORG YEL
ORG BLK
ORG BRN
ORG RED
ORG YEL
RED BLU
GRN BLU
BLU
RED VIO
GRN VIO
BLU VIO
RED GRY
GRN GRY
BLU GRY
RED WHT
GRN WHT
BLU WHT
ORG GRY
ORG WHT
BRN BLK
Src.
Pin
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2
2
2
2
10
10
10
10
10
10
10
10
10
8
8
8
8
8
8
Src.
Wire
RED
RED
RED
RED
RED
RED
RED
RED
YEL
YEL
YEL
YEL
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
Location Type
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Feature
Light
Color
Red
Green
Blue
Red
Green
Blue
White
White
White
White
White
White
Red
Green
Blue
White
White
Red
Green
Blue
White
White
White
Red
Green
Blue
White
White
White
White
White
White
White
White
White
White
Red
Green
Blue
White
White
White
Red
Green
Blue
White
White
White
White
White
White
White
Address
Part Number
11-LP-3
11-LP-4
11-LP-5
11-LP-16
11-LP-17
11-LP-18
11-LP-19
11-LP-20
9-LP-0
9-LP-1
9-LP-2
9-LP-3
10-LP-49
10-LP-50
10-LP-51
10-LP-21
10-LP-23
10-LP-46
10-LP-47
10-LP-48
10-LP-19
10-LP-20
10-LP-22
10-LP-43
10-LP-44
10-LP-45
10-LP-29
10-LP-27
10-LP-26
10-LP-30
10-LP-31
10-LP-28
10-LP-24
10-LP-25
10-LP-18
10-LP-14
10-LP-32
10-LP-33
10-LP-34
10-LP-16
10-LP-8
10-LP-13
10-LP-52
10-LP-53
10-LP-54
10-LP-55
10-LP-56
10-LP-11
10-LP-10
10-LP-9
10-LP-12
10-LP-58
520-6971-00
520-6971-00
520-6971-00
520-5333-00
520-5333-00
520-5333-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5307-00
520-5333-00
520-5333-00
520-5333-00
520-6970-00
520-6970-00
520-5333-00
520-5333-00
520-5333-00
520-6970-00
520-6970-00
520-6970-00
520-5333-00
520-5333-00
520-5333-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-5333-00
520-5333-00
520-5333-00
520-5307-00
520-5307-00
520-6970-00
520-6970-00
520-6970-00
520-6970-00
520-5307-00
ID
Name
Node Node
Ext.
10
10a
10
10a
10
10a
11
11
10
10a
10
10a
10
10a
11
10
10a
10
10a
10
10
10
10
1
-
140
141
146
147
148
149
150
151
153
154
155
156
157
158
159
160
AR(M)Y
ARM(Y)
Sling Flash
Mid Playfield Flash-Left
Pop flash
STAR Flash
Paul Flash
Left Ramp Flash
Mid Playfield Flash-Right
Gene Flash
Right Ramp Flash
Backpanel Flash 1-L
Backpanel Flash 2
Backpanel Flash 3
Backpanel Flash 4-R
Coin Enable
165 Coin Door GI(x2)
1
166 Playfield GI-WHT
10a-CN8
10a-CN8
10a-CN8
CN8
CN6
10a-CN4
10a-CN4
10a-CN4
CN2
10a-CN4
10a-CN6
CN6
CN8
CN10
CN12
CN8
Ret.
Pin
2
3
6
11
9
2
1
3
11
4
6
1
1
1
1
6
BRN RED
BRN ORG
YEL GRN
YEL BLK
ORG GRN
YEL BRN
YEL RED
ORG GRN
YEL VIO
YEL ORG
ORG BLU
YEL BLK
YEL BRN
YEL RED
YEL ORG
BLK GRY
Src.
Pin
8
8
8
2/3
2/3
5
5
5
2/3
5
8
2
2
2
2
2
-
CN5
2
YEL
1
8
-
CN13
1
WHT BLK
3
167 Playfield GI-RED
9
-
CN13
1
RED BLK
3
168 Playfield GI-BLU
10
-
CN13
1
BLU BLK
3
Conn.
Ret. Wire
Src.
Wire
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
RED
YEL
YEL
YEL
YEL
GRY
RED
YEL
WHT
YEL
BLK
YEL
RED
YEL
BLU
Location Type
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Playfield
Back Pnl
Back Pnl
Back Pnl
Back Pnl
Coin Door
Feature
Feature
Flash
Flash
Flash
Flash
Flash
Flash
Flash
Flash
Flash
Flash
Flash
Flash
Flash
Digital Out
Light
Color
White
White
White
White
White
White
White
White
White
White
White
White
White
White
White
Address
Part Number
10-LP-59
10-LP-60
10-LP-63
11-LP-31
11-LP-21
10-LP-36
10-LP-35
10-LP-37
11-LP-7
10-LP-38
10-LP-57
10-LP-0
10-LP-1
10-LP-2
10-LP-3
1-LP-0
520-5307-00
520-5307-00
520-6785-00
520-6785-00
520-6785-00
520-6785-00
113-5032-08
520-6785-00
520-6785-00
113-5032-08
520-6785-00
520-6785-00
520-6785-00
520-6785-00
520-6785-00
Coin Door G.I.
White
1-LP-1
112-5033-08
Playfield
White
8-LP-4
112-5034-08
Red
9-LP-4
112-5034-02
Blue
10-LP-4
112-5034-05
G.I.
Playfield/ G.I.
Back Pnl
Playfield G.I.
19
ELECTRONIC PINOUTS AND SCHEMATICS
4. ELECTRONIC PINOUTS AND SCHEMATICS
4.1 SPIKE CPU NODE 0
520-6936-00
DIRECT SWITCH MAPPING (CN25)
The coin-door diagnostic switches are connected directly to the CPU node via the Cabinet Node. Note that both the CPU and
Cabinet nodes are required for diagnostic switch operation.
ID
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C16
Name
DIP 1
DIP 2
DIP 3
DIP 4
DIP 5
DIP 6
DIP 7
DIP 8
Service Select
Service Plus
Service Minus
Service Back
Playfield Power
Interlock
Conn.
CN25
CN25
CN25
CN25
CN7
Input Pin
1
2
3
4
4
Input Wire
LGN-GRY
LGN-VIO
LGN-BLU
LGN-BLK
GRY
GND Pin
11
11
11
11
5
Connector Type
5-Pin .156” Header
RJ45
2-Pin .156”
5-Pivn .156” Header
3.5mm Stereo TRS jack
USB
CN21
USB
CN22
CN23
CN24
CN25
RJ45
COMPONENTS
ID
S1
S2
SD CARD
BT1
20
Location
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
Coin Door
Coin Door
Coin Door
Coin Door
Cabinet
Type
Interlock
Address
0-SW-0
0-SW-2
0-SW-3
0-SW-4
0-SW-5
0-SW-6
0-SW-7
0-SW-8
0-SW-9
0-SW-10
0-SW-11
0-SW-12
0-SW-16
Part Number
180-5192-04
180-5192-02
180-5192-02
180-5192-00
180-5136-00
STATUS LEDS
CONNECTORS
ID
CN1
CN3
CN4
CN7
CN18
CN20
Ground Wire
BLK-WHT
BLK-WHT
BLK-WHT
BLK-WHT
GRY-RED
Description
Backbox 2-channel amplified speaker out
SPIKE node bus - to cabinet node N1
Cabinet 1-channel amplified speaker out
48V supply from main power supply
Headphone Jack
USB connector - for software updates,
audit dumps, and expansion modules
USB connector - for software updates,
audit dumps, and expansion modules
SPIKE node bus - to playfield node, N8
Dot matrix display connector
5V DC and ground out to the LED display
Dedicated switch inputs - service, volume
switches
Name
Reset Switch
DIP Switches
For system SD card. Note: only to be removed if instructed to by
Stern Service.
CR232 3V Lithium battery for game clock between power cycles
LED ID
48V
24V
9V
5V
TxD
RxD
Status
Netstat
Name
Color Description
+48V Supply In Red
ON: Main system power is connected,
OFF: No 48V system power. Check power
supply connections, cables, and fuses.
+24V Audio
Red
ON: Audio power supply is good, OFF:
Power
Audio power supply off, call tech support.
+9V Node Bus Red
ON: Node bus power supply is good,
Power
OFF: Node bus power supply bad, call
tech support.
Red
ON: Logic power supply is good. OFF:
Logic power supply bad, call tech
support.
Node bus
Red
Node bus transmit activity
transmit
Node bus
Red
Node bus receive activity
receive
System status Red
Constant double blink - game software
running
Network status Red
Communication bridge activity
SPIKE CPU NODE 0 CONTINUED
4 Ohms
8 Ohms
8 Ohms
600 Ohms
600 Ohms
20W
40W
-
1
20W
-
1
CN27 .100" 3-pin
header
5
1
2
1
2
3
4 Ohms
4 Ohms
CN23
CN7
LINE
OUT
AMPLIFIED AUDIO
OUT
CN18
CN4
CN1
1
1
CN24
BT1
BATTERY
S1
520-6936-00A
SPIKE CPU
C+ C- L+ L-
SD CARD
1
D28 D29 D30 D13
RESET
1
CN25
STATUS
.156" 2-pin
Header
2
3
4
8 Ohms
8 Ohms
4 Ohms
Max
Power
(RMS)
200mW
200mW
-
HEADPHONE
CN4
.156" 5-pin
Header
Headphone Left
Headphone Right
Audio Ground
Speaker Right
Ground (-)
Speaker Right (+)
n/c
Speaker Left
Ground (-)
Speaker Left (+)
Woofer Ground (-)
Woofer Out (+)
Line Out Left (+)
Line Out Ground
Line Out Right (-)
Minimum
Impedance
NETSTAT
TxD
RxD
CN1
Tip
Ring
Sleeve
1
Description
48V
24V
9V
5V
CN18 TRS 3.5mm
Headphone
Jack
Pin
GND
SCL
SDA
RST
Type
+48V
ID
POWER IN
AUDIO PINOUTS
DIP S2
USB
CN21
SPIKE NODE BUS
CN3
CN22
CN20
R+ R-
Figure 4.1.1. SPIKE CPU Node connector detail.
COIN DOOR SERVICE SWITCH WIRING
COUNTRY CODES (DIP S2)
Country
USA
Austria
Australia
Belgium
Canada 1
Canada 2
Croatia
Denmark
Finland
France
Germany
Greece
Italy
Japan
Middle East
Netherlands
New Zealand
Norway
Portugal
Russia
S. Africa
Spain
Sweden
Switzerland
Taiwan
United Kingdom
DIP S2
1
2
OFF OFF
ON
OFF
ON
OFF
OFF ON
ON
ON
OFF ON
OFF ON
ON
OFF
ON
OFF
OFF ON
ON
ON
ON
ON
OFF OFF
ON
OFF
ON
ON
OFF OFF
OFF OFF
OFF ON
ON
OFF
ON
OFF
OFF OFF
OFF ON
ON
ON
OFF OFF
OFF OFF
OFF ON
3
OFF
OFF
ON
OFF
OFF
OFF
ON
OFF
ON
ON
ON
ON
OFF
ON
ON
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
ON
OFF
ON
4
OFF
OFF
ON
OFF
OFF
ON
OFF
ON
OFF
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
OFF
ON
ON
ON
ON
5
OFF
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
OFF
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
OFF
6
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
7
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
8
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Figure 4.1.2. Service switch wiring. Note that the Cabient Node
must be present and CN10 and CN12 connected for the Coin
Door Service Switches to function correctly.
21
CN6
CN7
CN9
22
1
TICKET
CN9
LEDS INPUTS FLIPPER
CABINET LEFT
1
1
ID
CN10
CN11
CN12
CN14
CN7
CABINET RIGHT
METER 2 FLIPPER
METER 1
1
1
Type
.100" 6-Pin
Header
Service
Switch In
Pin
1
2
3
4
5
6
1
.100" 5-Pin
Header
2
Ticket Dis3
penser
4
5
.100" 10-Pin 1
Header
2
CPU Direct
3
Switches
4
5
6
7
8
9
10
.156" 5-Pin
1
Header Power 2
Input
3
4
5
INPUTS
SHAKER MOTOR
LEDS
CN14
1
Description
Service Back (To Coindoor)
Service Down (To Coindoor)
Service Up (To Coindoor)
Service Select (To Coindoor)
Key
Service Ground (To Coindoor)
12V
N/C
Ticket Dispenser Enable
Ground
Ticket Dispenser Notch
Service Back (To CPU)
Service Down (To CPU)
Service Up (To CPU)
Service Select (To CPU)
Power Present
Service Ground (To CPU)
N-C
N/C
N/C
N/C
Ground
Key
N/C
N/C
48VDC In
*Varies by country model
1
CN2
1
1
CN8
CN4
CN10
520-5319-00F
Cabinet Node
POWER
CN1
3A 125V
TIME LAG FUSE
CN5
TO CPU
CN12
1
MENU BUTTONS
CN5
Wire Color
BLU
Key
RED
RED
BLK
RED
BLK
YEL-WHT
YEL
BLK
LGN-RED
PNK-GRN*
PNK-YEL*
PNK-ORN*
PNK-RED*
PNK-BRN*
RED
YEL-RED
YEL-BRN
BLK-WHT
WHT
GRY-WHT
GRY
Key
-
COIN DOOR
CN4
Description
Shaker Motor (-)
Shaker Motor (-)
Shaker Motor (+)
Key
Shaker Motor (+)
Meter 12V (+)
Meter (-)
N/C
Meter 12V (+)
Meter (-)
N/C
5V Out
Coin LED Out
Ground
Slam Tilt In
Coin 5
Coin 4
Coin 3
Coin 2
Coin 1
5V LED Power
Start 2 LED
Start 1 LED
Spare LED
Ground
Spare Left
Tilt Input
Door Open
Start 2 Switch
Start 1 Switch
N/C
N/C
N/C
N/C
5V LED Power
Plunge 2 LED
Plunge 1 LED
Spare LED 2
Ground
Spare Right In
Plunge 2 Switch
Plunge 1 Switch
N/C
N/C
N/C
N/C
Coin Enable/DBA Inhibit (-)
Coin Enable/DBA Inhibit (+)
Key
DBA 12V
Coin 6 / DBA Credit
Ground
CN13
DBA
CN3
Type
Pin
.156" 5-Pin
1
Header
2
Shaker Motor
3
4
5
1
.100" 3-Pin
Header
2
Meter 1
3
1
.100" 3-Pin
Header
2
Meter 2
3
.100" 9-Pin
1
Header
2
3
4
5
6
7
8
9
.100" 14-Pin 1
Header
2
Cabinet Left
3
4
5
6
7
8
9
10
11
12
13
14
.100" 12-Pin 1
Header
2
Cabinet Right
3
4
5
6
7
8
9
10
11
12
1
.100" 6-Pin
Header
2
Dollar Bill
3
Acceptor
4
5
6
1
CN3
ID
CN2
CN11
520-5319-00
CN6
4.2 NODE 1 CABINET
Wire Color
LGN-BLK
LGN-BLU
LGN-VIO
LGN-GRY
Key
BLK
RED
WHT
BLK
BLU
LGN-BLK
LGN-BLU
LGN-VIO
LGN-GRY
LGN-ORG
BLK-WHT
BLK
Key
GRY-YEL
4.3 LOWER PLAYFIELD 48V 8-DRIVER PINOUT NODE 8
520-6935-00
GREEN
ORANGE
BLACK
NEUTRAL
F1A
CN3
2
3
4
CN10
CN8
CN6
CN2
TOP
GREEN
ID
SW1
CN2
CN3
CN4
CN5
CN6
CN7
CN8
CN9
CN4
CN5
ON
1
CN12
CN7
TIME LAG
520-6935-00
8-Driver Node
CN14
CN9
F1B
CN11
CN1
125V 7A
CN13
Type
Address DIP
RJ45
RJ45
.156" 5-Pin
Header Node
Power
Pin
1
2
3
4
5
.156" 4-Pin
1
Header (White) 2
3
4
.156 6-Pin
1
Header (White) 2
3
4
5
6
.156" 4-Pin
1
Header (Black) 2
3
4
.156 6-Pin
1
Header (Black) 2
3
4
5
6
.156" 4-Pin
1
Header (Orange) 2
3
4
Description
Node 8 - OFF-OFF-OFF-OFF
SPIKE Node Bus
SPIKE Node Bus
Ground
Key
N/C
N/C
48VDC In
Switch Ground
8-SW-0 Switch Return
8-DR-0 Driver Return
48V Driver Power
8-LP-0 Light Return
LED V+
Switch Ground
48V Driver Power
Switch Ground
8-SW-1 Switch
48V Driver Power
8-LP-1 Light Return
LED V+
Switch Ground
8-SW-5
48V Driver Power
Switch Ground
8-SW-2 Switch
48V Driver Power
Wire Color
n/a
Multi
BLK
Key
GRY
BLK-GRN
GRY-YEL
ORG-YEL
GRY-ORG
BLK-GRN
GRY-WHT
ORG-WHT
GRY-ORG
BLK-GRN
GRY-GRN
ORG-GRN
GRY-ORG
ORG-GRY
GRY-ORG
BLK-GRN
GRY-BRN
YEL-ORG
-
ORANGE
ID
CN10
CN11
CN12
CN13
CN14
F1
BLACK
Type
Pin
.156" 6-Pin
1
Header (Orange) 2
3
4
5
6
.156" 4-Pin
1
Header (Green) 2
3
4
.156" 6-Pin
1
Header (Green) 2
3
4
5
6
.100" 3-Pin
1
Header
2
3
.100" 6-Pin
1
Header, Node
2
Extension Bus
3
4
5
6
Fuse
-
NEUTRAL
Description
8-LP-2 Light Return
LED V+
Switch Ground
48V Driver Power
Switch Ground
8-SW-3 Switch
48V Driver Power
8-LP-3 Light Return
LED V+
Switch Ground
48V Driver Power
8-LP-4 GI Return (1A Max)
GI Ground
LED V+
Ground
DIN
DOUT
SCK
RCK
V+
7A SB, 125V
Wire Color
BLK-GRN
GRY-VIO
ORG-VIO
GRY-ORG
BLK-GRN
GRY-RED
YEL-GRN
BLK-GRN
GRY-BLU
ORG-BLU
GRY-ORG
WHT-BLK
YEL-BLK
BLK
VIO-BLK
VIO-RED
VIO-ORG
RED
n/a
23
4.4 NODE 9 MID PLAYFIELD 8-DRIVER 48V PINOUT
520-6935-00
GREEN
ORANGE
BLACK
NEUTRAL
F1A
CN3
1
CN14
CN12
CN5
2
3
4
CN10
CN8
CN6
CN2
TOP
GREEN
ID
SW1
Type
Address DIP
CN2
CN3
CN4
RJ45
RJ45
.156" 5-Pin
Header Node
Power
CN5
CN6
CN7
CN8
CN9
24
Pin
-
1
2
3
4
5
.156" 4-Pin
1
Header (White) 2
3
4
.156 6-Pin
1
Header (White) 2
3
4
5
6
.156" 4-Pin
1
Header (Black) 2
3
4
.156 6-Pin
1
Header (Black) 2
3
4
5
6
.156" 4-Pin
1
Header (Orange) 2
3
4
Description
Node 9 - OFF-OFF-ONOFF
SPIKE Node Bus
SPIKE Node Bus
Ground
Key
N/C
N/C
48VDC In
Switch Ground
48V Driver Power
8-LP-0 Light Return
LED V+
Switch Ground
48V Driver Power
Switch Ground
9-SW-1 Switch
48V Driver Power
9-LP-1 Light Return
LED V+
Switch Ground
9-SW-5
48V Driver Power
Switch Ground
9-SW-2 Switch
48V Driver Power
Wire Color
Multi
Multi
BLK
Key
GRY
BLK-BRN
LGN-YEL
YEL-BLU
GRY-BLK
ORG-BLK
YEL
BLK-BRN
LGN-BLK
ORG-BLK
GRY-BLK
BLK-BRN
LGN-BLU
YEL-GRY
GRY-BLK
ORG-BRN
YEL
BLK-BRN
LGN-BRN
ORG-BRN
GRY-BLK
BLK-BRN
LGN-VIO
YEL-WHT
GRY-BLK
ORANGE
ID
CN10
CN11
CN12
CN13
CN14
F1
BLACK
Type
Pin
.156" 6-Pin
1
Header (Orange) 2
3
4
5
6
.156" 4-Pin
1
Header (Green) 2
3
4
.156" 6-Pin
1
Header (Green) 2
3
4
5
6
.100" 3-Pin
1
Header
2
3
.100" 6-Pin
1
Header, Node
2
Extension Bus
3
4
5
6
Fuse
-
NEUTRAL
Description
9-LP-2 Light Return
LED V+
Switch Ground
48V Driver Power
Switch Ground
9-SW-3 Switch
48V Driver Power
9-LP-3 Light Return
LED V+
Switch Ground
48V Driver Power
9-LP-4 GI Return (1A Max)
GI Ground
LED V+
Ground
DIN
DOUT
SCK
RCK
V+
7A SB, 125V
Wire Color
ORG-RED
YEL
BLK-BRN
LGN-RED
ORG-RED
GRY-BLK
BLK-BRN
LGN-GRY
YEL-VIO
GRY-BLK
ORG-YEL
YEL
BLK-BRN
LGN-ORG
ORG
GRY-BLK
RED-BLK
YEL-RED
BLK
VIO-BLK
VIO-BRN
VIO-RED
VIO-ORG
RED
n/a
CN4
520-6935-00
8-Driver Node
CN7
125V 7A
CN9
ON
F1B
CN11
CN1
TIME LAG
CN13
4.5 NODE 10 UPPER PLAYFIELD 8-DRIVER 48V PINOUT
520-6935-00
GREEN
ORANGE
BLACK
NEUTRAL
F1A
CN3
1
CN14
CN12
CN5
2
3
4
CN10
CN8
CN6
CN2
TOP
GREEN
ID
SW1
Type
Address DIP
CN2
CN3
CN4
RJ45
RJ45
.156" 5-Pin
Header Node
Power
CN5
CN6
CN7
CN8
CN9
CN4
520-6935-00
8-Driver Node
CN7
TIME LAG
CN9
ON
F1B
CN11
CN1
125V 7A
CN13
Pin
-
1
2
3
4
5
.156" 4-Pin
1
Header (White) 2
3
4
.156 6-Pin
1
Header (White) 2
3
4
5
6
.156" 4-Pin
1
Header (Black) 2
3
4
.156 6-Pin
1
Header (Black) 2
3
4
5
6
.156" 4-Pin
1
Header (Orange) 2
3
4
Description
Node 10- OFF-ON-OFFOFF
SPIKE Node Bus
SPIKE Node Bus
Ground
Key
N/C
N/C
48VDC In
Switch Ground
48V Driver Power
10-LP-0 Light Return
LED V+
Switch Ground
48V Driver Power
Switch Ground
10-SW-1 Switch
48V Driver Power
LED V+
Switch Ground
10-SW-5
48V Driver Power
Switch Ground
10-SW-2 Switch
48V Driver Power
Wire Color
Multi
Multi
BLK
Key
GRY
BLK-BLU
WHT-GRN
YEL-BLK
GRY-BRN
YEL-BLK
WHT-BRN
BLU-BLK
GRY-BRN
BLK-BLU
WHT-BLU
YEL-BRN
GRY-BRN
YEL-BRN
WHT-RED
BLU-BRN
GRY-BRN
BLK-BLU
WHT-VIO
YEL-RED
GRY-BRN
ORANGE
ID
CN10
CN11
CN12
CN13
CN14
F1
BLACK
Type
Pin
.156" 6-Pin
1
Header (Orange) 2
3
4
5
6
.156" 4-Pin
1
Header (Green) 2
3
4
.156" 6-Pin
1
Header (Green) 2
3
4
5
6
.100" 3-Pin
1
Header
2
3
.100" 6-Pin
1
Header, Node
2
Extension Bus
3
4
5
6
Fuse
-
NEUTRAL
Description
LED V+
Switch Ground
48V Driver Power
Switch Ground
10-SW-3 Switch
48V Driver Power
LED V+
Switch Ground
48V Driver Power
10-LP-4 GI Return (1A
Max)
GI Ground
LED V+
Ground
DIN
DOUT
SCK
RCK
V+
7A SB, 125V
Wire Color
YEL-RED
YEL
BLK-BLU
WHT-ORG
BLU-RED
BLK-BLU
WHT-GRY
BLU-YEL
GRY-BRN
YEL-ORG
YEL
BLK-BLU
WHT-YEL
BLU-ORG
GRY-BRN
BLU-BLK
YEL-BLU
BLK
VIO-BLK
VIO-BRN
VIO-RED
VIO-ORG
RED
n/a
25
4.6 NODE 11 UPPER PLAYFIELD 32-LIGHT AND SWITCH PINOUT
520-5322-00
CN12
GREEN
ORANGE
BLACK
CN4
CN6
CN2
NEUTRAL
CN8
CN5
CN7
GREEN
CN2
CN3
26
3
CN9
32 SW / 32 LED NODE
CN10
Type
Pin
Address DIP
.100" 10-Pin
1
Header (White) 2
3
4
5
6
7
8
9
10
.100" 12-Pin
1
Header (Green) 2
3
4
5
6
7
8
9
10
11
12
.100" 10-Pin
1
Header (Black) 2
3
4
5
6
7
8
9
10
2
SW1
520-5322-00
ID
SW1
CN1
ON
1
ORANGE
Description
Node 11- OFF-ON-ON
+5V
Switch Ground
+8V
+5V
+5V
Ground
+5V
Switch Ground
Wire Color
TAN-BLK
TAN-RED
TAN-ORG
TAN-YEL
TAN-GRN
TAN-BLU
BLK-ORG
RED
RED-BRN
GRN-BRN
BLU-BRN
RED-ORG
GRN-ORG
BLU-ORG
YEL-VIO
RED
PNK-BRN
PNK-RED
PNK-ORG
PNK-GRN
PNK-BLU
PNK-VIO
BLK-RED
CN1
CN3
BLACK
ID
CN4
CN5
CN6
CN11
NEUTRAL
Type
.100" 12-Pin
Header (Orange)
Pin
1
2
3
4
5
6
7
8
9
10
11
12
1
.100" 10-Pin
Header (Or2
ange)
3
4
5
6
7
8
9
10
.100" 12-Pin
1
Header (Black) 2
3
4
5
6
7
8
9
10
11
12
Description
+8V
+5V
+5V
Ground
+5V
Switch Ground
+8V
+5V
+5V
Ground
Wire Color
RED
RED
RED-YEL
GRN-YEL
BLU-YEL
RED-GRN
GRN
BLU-GRN
ORG-BLK
ORG-BRN
RED
LGN-BLK
LGN-BRN
LGN-RED
LGN-ORG
LGN-YEL
LGN-BLU
BLK-GRY
RED
RED
RED-GRY
GRN-GRY
BLU-GRY
ORG-RED
ORG-YEL
ORG-GRN
ORG-BLU
ORG-VIO
-
NODE 11 UPPER PLAYFIELD 32-LIGHT AND SWITCH PINOUT
ID
CN7
CN8
CN9
CN10
CN11
CN12
Type
Pin
.100" 10-Pin
1
Header (Green) 2
3
4
5
6
7
8
9
10
.100" 12-Pin
1
Header (White) 2
3
4
5
6
7
8
9
10
11
12
RJ45
RJ45
.100" 6-Pin
1
Header, Node 2
Extension Bus
3
4
5
6
Description
+5V
Switch Ground
+8V
+5V
+5V
Ground
SPIKE Node Bus
SPIKE Node Bus
Not Used
Ground
DIN
DOUT
SCK
RCK
V+
Wire Color
WHT-BRN
WHT-RED
WHT-ORG
WHT-YEL
WHT-GRN
WHT-BLU
WHT-VIO
WHT-GRY
BLK-VIO
RED
RED
BRN-BLK
BRN-RED
BRN-ORG
BRN-YEL
BRN-GRN
BRN-BLU
BRN-VIO
YEL-BLK
Multi
Multi
-
27
4.9 TROUGH OPTO TRANSMITTER
4.7 DUAL MOTOR DRIVER
520-5344-00
520-5338-00
F1A
1A 250V
F1B
CN2
TIME LAG
1
ID
CN1
CN3
1
Type
.100" 3-Pin Header
Pin
1
2
3
Description
Ground
N/C
+5 VDC IN
Wire Color
BLK
RED
1
CN1
ID
CN1
Type
.100" 6-Pin Connector
CN2
.156 5-Pin Connector
CN3
.156 6-Pin connector
Pin
1
2
3
4
5
6
1
2
3
4
5
1
2
3
4
5
6
Description
Ground
PHB1
PHB0
PHA1
PHA0
V+v
GND
KEY
N/C
N/C
+48 VDC IN
DRIVEB-1
Ground
DRIVEB-0
DRIVEA-1
Ground
DRIVEA-0
Wire Color
BLK
BLU-YEL
BLU-ORG
BLU-RED
BLU-BRN
RED
BLK
Key
GRY
BRN
GRY
BRN-WHT
GRY-BRN
4.10TROUGH OPTO RECEIVER
520-5345-01
ID
CN1
Type
.100" 7-Pin Header
Pin
1
2
3
4
5
6
7
Description
Ground
MISO Output Data
MOSI Input Data
SCK Serial Clock
RCK Register Clock
N/C
+5 VDC IN
4.8 MAIN POWER SUPPLY
011-5003-00
ID
CN1
28
Type
Pin
Screw Terminal 1
2
3
4
5
6
7
8
9
LED
Description
AC Line Hot In
AC Line Neutral In
Earth Ground In
DC Ground
DC Ground
DC Ground
+48 V System Power
+48 V System Power
+48 V System Power
Wire Color
BLK
WHT
GRN
BLK
BLK
BLK
GRY
GRY
GRY
+V ADJ.
9
8
7
6
5
CN1
4
3
2
1
Wire Color
BLK
VIO-BLK
VIO-RED
VIO-ORG
RED
4.11KISS LE LOWER PLAYFIELD
GRID LED
4.12KISS LE UPPER PLAYFIELD
LED
ID
CN1
Type
.156" 5-Pin Header
Node Power
ID
CN1
CN2
.100" 7-Pin Header
CN3
.100" 4-Pin Header
520-6969-00
Pin
1
2
3
4
5
1
2
3
4
5
6
7
1
2
3
4
Description
Ground
Key
N/C
N/C
48VDC In
Ground
MISO Output Data
MOSI Input Data
SCK Serial Clock
RCK Register Clock
N/C
+5 VDC IN
Ground
LED62
LED63
+5 VDC LED Supply
Wire Color
BLK
Key
GRY
BLK
VIO-BLK
VIO-BRN
VIO-RED
VIO-ORG
RED
ORG-RED
ORG-YEL
RED
520-6970-00
CN2
CN4
CN6
CN7
CN8
CN9
Type
.156" 5-Pin Header
Node Power
Pin
1
2
3
4
5
.100" 7-Pin Header 1
2
3
4
5
6
7
2
3
4
5
2
3
4
5
6
7
8
2
3
4
5
6
7
8
9
10
2
3
4
5
6
7
8
2
3
4
5
6
Description
Ground
Key
N/C
N/C
48VDC In
Ground
MISO Output Data
MOSI Input Data
SCK Serial Clock
RCK Register Clock
N/C
+5 VDC IN
LED35
LED36
LED37
LED38
+5 VDC LED Supply
LED52
LED53
LED54
LED55
LED56
LED57
N/C
+5 VDC LED Supply
LED43
LED44
LED45
LED46
LED47
LED48
LED49
LED50
LED51
+5 VDC LED Supply
LED58
LED59
LED60
LED61
LED62
LED63
N/C
+5 VDC LED Supply
+5 VDC LED Supply
LED39
LED40
LED41
LED42
Ground
Wire Color
BLK
Key
GRY
BLK
VIO-BLK
VIO-BRN
VIO-RED
VIO-ORG
RED
YEL-RED
YEL-BRN
ORG-GRN
YEL-ORG
RED
RED-WHT
GRN-WHT
BLU-WHT
ORG-GRY
ORG-WHT
ORG-BLU
RED
RED-GRY
GRN-GRY
BLU-GRY
RED-VIO
GRN-VIO
BLU-VIO
RED-BLU
GRN-BLU
BLU
RED
BRN-BLK
BRN-RED
BRN-ORG
BRN-YEL
BRN-GRN
YEL-BLU
RED
RED
BLU-BRN
BLU-RED
BLU-ORG
BLU-YEL
BLK
29
4.13POWER DISTRIBUTION BOARD 4.14POWER PLUG WIRING
520-5343-00
CAUTION
TO MAINTAIN SAFETY, GROUND WIRE FROM LINE FILTER
IS TO BE MOUNTED FIRST ON GROUNDING STUD AND SECURED WITH NUT. ALL OTHER GROUNDS MAY THEN BE ATTACHED TO GROUNDING STUD.
NORTH AMERICA
REPLACE ALL FUSES WITH CORRECT CURRENT RATINGS!
NORTH AMERICA
NEMA 5-15 PREWIRED OUTLET
FUSE
L
ID
CN1
Type
.156" 7-Pin
Header
CN2
.093" 3-Pin
Header
CN3
.084" 4-Pin
Header
CN4
.084" 6-Pin
Header
CN5
.084" 12-Pin
Header
Pin
1
2
3
4
5
6
7
1
2
3
1
2
3
4
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
12
G
LINE FILTER
Description
Wire Color
N
+48 VDC IN
GRY
+48 VDC IN
GRY
GROUNDING
STUD
+48 VDC IN
GRY
Key
Key
POWER SUPPLY
Ground
BLK
POWER DIST.
Ground
BLK
BILL VALIDATOR
(USER INSTALLED OPTION)
ON/OFF SW
Ground
BLK
Line In (100-240 VAC)
BLK
*MFG
Neutral
WHTNOTES:
FUSE
1. ALL DISCREET WIRE IS 16AWG 600V, UL 1015, CSA TYPE TEW.
Earth Ground
GRN
L
2. NEMA 5-15 OUTLET HAS 14AWG 600V WIRE, UL 1015, CSA TYPE TEW.
3. GROUND WIRE FROM LINE FILTER IS TO BE MOUNTED FIRST ON GROUNDING STUD
+48 VDC to CPU Node
GRY
LINE
FILTER
AND SECURED WITH NUT. ALL OTHER GROUNDS
MAY THEN
BE ATTACHED TO G
GROUNDING STUD.
N
1.00" 2.00"
Door Interlock Switch Status
GRY-RED
4. CABLE ARE TO BE MANUFACTURED IN A UL CERTIFIED FACILITY. VENDOR IS TO
PROVIDE A SIGNED U.L. CERTIFICATE OF COMPLIANCE WITH FIRST ARTICLE.
Line Voltage Status
VIO
GROUNDING
Ground
BLK
STUD
Door Interlock Switch +48V
GRY
POWER SUPPLY
Door Interlock Switch +48V
GRY
POWER DIST.
Switched 48V Out (to Node 1) GRY-YEL
Door Interlock Return Ground GRY-RED
ON/OFF SW
Door Interlock Return Ground GRY-RED
Ground (to Node 1)
BLK
Switched 48V Node Power *MFG
GRY
NOTES:
Part Number
Description
1.GRY
ALL DISCREET WIRE IS 16AWG 600V, UL 1015, CSA TYPE TEW.
Switched 48V Node Power
2. GROUND WIRE FROM LINE
FILTER IS TO BE MOUNTED FIRST
ON GROUNDING
034-6012-00
Line
Cord, 3m,STUD
5-15P USA
AND SECURED WITH NUT. ALL OTHER GROUNDS MAY THEN BE ATTACHED TO
GRY
GROUNDING STUD.
034-6012-01
Line Cord, 3m, CEE77P EUROPE
1.00" 2.00"
3.GRY
CABLE ARE TO BE MANUFACTURED IN A UL CERTIFIED FACILITY. VENDOR IS TO
PROVIDE A SIGNED U.L. 034-6012-02
CERTIFICATE OF COMPLIANCE WITH
FIRST
ARTICLE.
Line
Cord,
3m, BS1363P United Kingdom
GRY
034-6012-03
Line Cord, 3m, AS-NZS4417P Australia
GRY
034-6012-04
Line Cord, 3m, CEI23-16P Italy
Node Ground
BLK
034-6012-05
Line Cord, 3m, SEV1011P Switzerland
Node Ground
BLK
034-6012-06
Line Cord, 3m, JIS8303P Japan
Node Ground
BLK
034-6012-07
Line Cord, 3m, SI32P Israel
Node Ground
BLK
034-6012-08
Line Cord, 3m, BS546P S Africa, India
Node Ground
BLK
034-6012-09
Line Cord, 3m, IS6538P S. India
Node Ground
BLK
INTERNATIONAL
INTERNATIONAL
AC WIRING DIAGR
SPIKE BB
LINE CORDS
Figure 4.13.1. Power Distribution Board 520-5343-00 pinout
LINE FUSES
Line Voltage (Region)
120V (North America)
220/240v (Europe, Australia,
UK)
Fuse
Current
8A
5A
Type
Part Number
Slow Blow MDL
Slow Blow MDL
200-5000-05
200-5000-01
Figure 4.14.1. Standard fuses for line connections, 120V and
240V
30
05/02/14
1:1
05/02/14
1:1
SPIKE BB
X
PARTS REFERENCE
5. PARTS REFERENCE
5.1 PLAYFIELD RUBBER PARTS
RUBBER O-RINGS
5
4
4
1
5
5
2
1
8
2
8
Qty
4
2
1
3
1
5
9
ID
11
12
13
15
Qty
3
2
6
2
Size (ID)
3/16"
3/8"
7/16"
3/4"
1"
2"
Size (OD)
7/16"
Durometer
50
50
50
50
50
50
50
Color
Black
Black
Black
Black
Black
Black
Black
Part Number
545-5348-01
545-5348-03
545-5348-18
545-5348-04
545-5348-05
545-5348-08
545-5348-17
Figure 5.1.2. Rubber o-ring part numbers and usage. ID: Inner
Diamter, OD: Outer Diameter, Durometer: Higher number is firmer,
less bounce, and more durable.
Description
Plunger Tip
Flipper Rubber
Bumper Pad (Sub assemblies)
Bumper Pad (Flippers)
Color
Black
Black
Black
Black
Part Number
545-5276-00
545-5277-00
545-5105-00
545-5428-00
Figure 5.1.3. Other rubber part numbers and usage
5
6
ID
1
8
6
2
3
4
5
5.2 RUBBER SIZE CHART
5
3-1/2”
3”
5
2-3/4”
2-1/2”
4
2”
1-3/4”
3
1-1/2”
2
1-1/4”
1”
3/4”
1
1
4
5
4
12
12
11
3/8”
5/16”
3/16”
7/16” OD
Figure 5.1.1. Rubber o-ring part locations
7/16”
3/8” OD
Figure 5.2.1. Rubber ring inner diameter sizing tool. Hold ring up
to chart and read largest size on inside of ring. Dimensions are Inner Diameter (ID) unless otherwise noted as Outer Diamter (OD).
31
PARTS REFERENCE
5.3 PLAYFIELD ASSEMBLIES, TOP
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
13
19
11
17
18
6/9
14
20
6/10
6/8
17
6/7
16
Part Number
500-6005-H1
755-51H1-12-Y
755-5400-12-Y
515-5133-06-06
545-5277-10
516-0033-BRD
550-7400-H1-SM
550-7400-H1-DM
550-7400-H1-SC
550-7400-H1-CM
500-9954-00
535-1164-00
535-1182-00
500-9952-00
535-1165-00
511-7655-00-GE
511-5240-01-SPI
511-7677-00
511-7676-00
510-7534-01
550-5031-02
550-5032-07
Description
Bottom Arch Assembly
Instruction Card
Coin Card (USA)
Flip Bat -Yellow
Flipper Rubber -Black
Pop Top Prime Assembly
Hot-Stamped Bumper Cap -Space Man
Hot-Stamped Bumper Cap -Demon
Hot-Stamped Bumper Cap -StarChild
Hot-Stamped Bumper Cap -Cataman
Left Plastic Ramp Assembly
Left Wire Ramp
Vuk Snubber
Right Ramp Assembly
Right Wire Ramp
Spinner Assembly Left Hand
Spotlight Flash LED
Gene Head and Plate Assembly
Paul Assembly
Riveted Assembly Head Trough
Mini Mars (Red)
Hat (Orange)
22
22
12
15
21
21
5
5
4
4
2
3
1
Figure 5.3.1. Major playfield assemblies, Top locations.
32
Qty
1
1
1
2
2
4
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
2
PARTS REFERENCE
5.4 PLAYFIELD ASSEMBLIES, BOTTOM
3
3
18
2
1
6
5
4
4
19
ID
1
2
3
4
5
Part Number
500-9818-00
500-9820-4BALL
500-7172-00
500-9920-01
500-6543-82-ND
6
500-6543-83-ND
7
8
9
10
11
12
13
14
15
16
17
500-9907-00-00
500-9904-00-00
515-6459-04-ND
500-9934-01
500-6697-00-ND
500-9812-ND
500-9920-01-RT
500-6511-01-ND
500-6520-ND
500-9965-00
500-7144-03
Description
Auto-Plunger
4-Ball Trough Assembly
Playfiled Supports
SlingShot Assembly
Flip Asssembly RT with Coil 090-5083-03ND
Flip Asssembly LT with Coil 090-5083-03ND
1/2" S/U Target Anti-Sway/ND
1" SQ Target S/U AntiLoft/Light/ND
Pop Bumper Bottom Assy 26-1200
Pop Bumper SW Assembly -LT
Kicker-Lugs Up Assembly
Power Scoop Assy with no diode
Slingshot Assembly 26-1200 Right
30Degree Eject assy 26-1200
30Degree Eject Switch
Up-Post VUK
Spinning Disk Assembly
Qty
1
1
1
2
1
1
2
12
4
4
1
1
2
1
1
1
1
8
18
8
20
8
11
8
12
9/10
21
9/10
9/10
9/10
7
13
22
23
7
17
23
13
25
8
8
14/15
8
8
24
16
18
Figure 5.4.1. Major playfield assemblies, Bottom locations.
33
PARTS REFERENCE
5.5 BACKBOX PARTS
9
4
3
1
3
2
1
7
8
3
5
6
11
5
2
6
4
Figure 5.5.1. Backbox external assemblies and components
Figure 5.5.2. Backbox internal assemblies and components
EXTERNAL
INTERNAL
ID
1
2
3
4
5
Part Number
830-52H2-00
545-5018-14
545-5018-15
545-6313-01
500-9854-H2
Description
Mirror Back Glass
Plastic Extrusion 18-1/8"
Glass Channel 26"
Glass lift Channel 26"
Speaker Panel Assembly
Qty
1
2
1
1
1
5.6 SPEAKER PANEL PARTS
ID
1
2
3
4
5
6
7
8
9
10
11
Part Number
520-6936-01
520-5343-00
011-5003-00
515-9769-00
205-5001-00
535-1130-00
535-1129-00
535-1129-01
355-5168-00
180-5001-03
511-7666-00
034-6012-00
Description
CPU Node Board -10 w/ LCD Adapter
Power Distribution Board
Power Supply 48V/500W
Utility Outlet (USA)
Fuse Holder-Screw in
Cover AC
Power supply bracket
Power supply bracket
Backbox Lock, 5/8 in
Power Switch
High Pass FIlter Assembly
Line Cord-3M 5-15P/C13RA*
Qty
1
1
1
1
1
1
1
1
1
1
1
1
500-9854-H2
ID
1
2
3
4
5
6
7
8
9
10
11
Part Number
515-9763-01
031-5004-02
040-5000-03
545-7849-00
545-7856-00
520-5052-15
254-5000-09
535-8081-01
240-5008-00
242-5001-00
820-8369-H1
Description
Speaker Panel
Speaker
1/4" Cable Clamp
Display Lens
Fische Paper LED Display
LED Display
Nylon Spacer
Speaker Grill
6-32 KEPS Nuts
# 6 Washer
Decal: Speaker Panel, KISS LE
Qty
1
2
3
1
1
1
6
2
14
8
1
ITEM
NO.
1
2
3
4
5
6
7
8
9
10
11
3
34
5
6
7
4
9
10
2
8
1
11
PART NU
515-9763
031-5004
040-5000
545-7849
545-7856
520-5052
254-5000
535-8081
240-5008
242-5001
820-8369
180-5160-01 SINGLE FLIPPER SWITCH
18
19
180-5160-00 FLIPPER SWITCH, DOUBLE
355-5038-00 DRAW LATCH, OVER CENTER CLAMP
20
21
545-5072-03 GRILL - SPEAKER / VENT
545-5072-02 GRILL - SPEAKER / VENT
22
031-5007-01 SPEAKER, CABINET 8" ROUND, 4 OHM
23
24
545-5090-00 CASH BOX - PLASTIC
DESCRIPTION
25
535-5013-03 CASH QTY.
BOX COVER
535-7562-00
26
DARD FOR SPIKE
SYSTEM
BACK CASH
BOX BOX LOCK BRACKET
535-7772-00 HAIR PIN1 CLIP
27
WO ILLUMINATED
BUTTONS)
28 SIDE
500-5921-XX LEG ASSEMBLY
BRACKET - LEFT
1
535-5221-00 HANGER1 WIRE BRACKET
29
BRACKET - RIGHT
SIDE
30
535-5319-01 HANGER1 WIRE 4.3"
KET, PF SUPPORT
535-7563-01
WIRE
31 LATCHED
G ASSEMBLY,
- BLACK TILT CONTACT
1
22LEFT, DUDES PRO
820-66G1-03 DECAL, CABINET
EFT - BLACK32
1
12
820-66G1-04 DECAL, CABINET
RIGHT, DUDES PRO
33
IGHT - BLACK
1
FRONT, DUDES PRO
EX, 1/2"OD, 34
1/4-20 820-66G1-05 DECAL, CABINET
2
660-5001-00 PLAYFIELD
D., 3/16" THK35
2 GLASS
1
1
2
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
5.7 CABINET PARTS
RRIAGE BOLT
NEL
L REAR EXTRUSION
BLACK WRINKLE
ASSEMBLY
ORT PLATE, NOTCHED
N ASSY (RED)
HUTE NO EMBOSS
R SWITCH
10
H, DOUBLE
OVER CENTER CLAMP
2
R / VENT
R / VENT
NET 8" ROUND, 4 OHM
ASTIC
ER
K BRACKET
21
27
BRACKET
29
4.3"
WIRE
T LEFT, DUDES PRO
T RIGHT, DUDES PRO 30
T FRONT, DUDES PRO
19
SS
2
2
1
2
1
1
2
1
1
1
2
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
34
ID
1
2
22
PARTS REFERENCE14
5
7
9
11
3
23
26
8
29
23
24
8
35
27
30
16
31
19
12
21
9
25
18
3
16
31
19
5
14
34
13
1
33
15
4
20
7
26
24
25
11
35
18
13
16
31
5
14
7
35
10
18
30
Part Number
525-5844-00
4
20
24
Description
11
CABINET, KISS
(PLUNGER & TWO BUTTONS)
2
535-5989-00
SLIDE & PIVOT BRACKET - LEFT SIDE
3
535-5990-00
SLIDE & PIVOT BRACKET - RIGHT SIDE
4
500-6881-00
LOCK DOWN NU STYLE
34 ASSEMBLY
5
500-6882-02-22G FRONT MOLDING ASSM. - NO HOLE GLOSS RED
6
535-7999-22G
PIVOT HINGE, LEFT - Black
7
535-7999-23G
PIVOT HINGE, RIGHT - Black
8
254-5042-00
SPACER NUT, HEX, 1/2"OD, 1/4-20
9
242-5084-00
WASHER, 1/2" I.D., 3/16" THK
10 231-5014-00
1/4-20 X 7/8" CARRIAGE BOLT
13PLASTIC CHANNEL
11 545-5017-00
12 545-9802-00
GLASS REAR
EXTRUSION
1
13L 535-9596-22G33 SIDE ARMOR LEFT GLOSS RED
13R 535-9596-23G
SIDE ARMOR RIGHT GLOSS RED
14 500-6146-00-07 BALL SHOOTER ASSEMBLY
15 535-5027-01
PLUNGER SUPPORT PLATE, NOTCHED
16 500-5026-32
FLIPPER BUTTON ASSY (Red)
17 501-5018-173
COIN DOOR 2-CHUTE NO EMBOSS
18 180-5160-01
FLIPPER SWITCH, Single
19 545-5072-03
GRILL - SPEAKER / VENT
20 545-5072-02
GRILL - SPEAKER / VENT
15
32
Qty
1
1
1
1
1
1
1
2
2
2
2
1
1
1
1
1
2
1
2
1
1
6
13
1
33
13
28
ID
Part Number
21 031-5007-01
32
22 6 545-5090-00
23 535-5013-03
24 535-7562-00
25 535-7772-00
26 500-5921-XX
28
27 516-0007-00
28 820-66H2-03
29 820-66H2-04
30 820-66H2-05
31 660-5001-00
820-66H2-XX
Description
SPEAKER, CABINET 8" ROUND, 4 OHM
CASH BOX - PLASTIC
CASH BOX COVER
CASH BOX LOCK BRACKET
HAIR PIN CLIP
LEG ASSEMBLY - GLOSS RED
TILT ASSEMBLY
DECAL, CABINET LEFT, KISS
DECAL, CABINET RIGHT, KISS
DECAL, CABINET FRONT, KISS
PLAYFIELD GLASS
Cabinet Decal Replacement Set, Speaker
Panel Decal Not Included
Qty
1
1
1
1
1
4
1
1
1
1
1
35
PARTS REFERENCE
5.9 BALL TROUGH ASSEMBLY
5.8 AUTO LAUNCH ASSEMBLY
500-9820-00
500-9818-00
11
10
1
2
1
7
2
8
2
9
9
9
14
9
13
7
7
12
17
5
12
17
11
4
8
9
6
5
5
3
13
18
4
16
10
7
9
3
6
10
2
1
11
7
1
2
8
9
14
9
7
12
17
17
17
13
9
ID
14
2
3
4
53
6
7
8
9
10
11
12
13
14
15
16
17
18
Part Number
515-9689-00
535-0728-00
270-5001-00
545-5352-00
090-5001-ND
545-5411-00
266-5020-00
12
530-7834-00
232-5300-00
530-7835-00
545-5423-00
237-5937-02
535-6539-00
180-5157-01
545-6268-00
535-0762-00
515-6304-03
545-0762-00
Description
11
MAIN BRKT: AUTO-PLUNGER
KICKER ARM, AUTO-PLUNGER
10 RETAINING E-RING, 3/16" SHAFT OD
7 NYLINER, 3/16" SHAFT
COIL - 23-800, NO DIODE
6
COIL SLEEVE
COMPRESSION SPRING-CONICAL
PIN:5 KICKER ARM, AUTO-PLUNGER
SCREW, 8-32 X 1/4" PPH SEMS
PIVOT, AUTO-PLUNGER
NYLINER, 1/4" SHAFT, 4L1-FF
13
SCREW, 2-56 X 1/2" HWH MS
6
SWITCH BODY PROTECT PLATE
SHOOTER SWITCH - SHORT ARM
4
FISCHE PAPER
COIL BRACKET-AUTOPLUNGER
PLUNGER / LINK ASSEMBLY
FISCHE PAPER: AUTO-LAUNCHER
Qty
1
1
1
1
1
1
1
8
1
4
1
1
2
1
1
1
1
1
1
5
17
Figure 5.8.1. Auto Launch Assembly 500-9818-00 bill of materials.
9
36
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
98*
Part Number
515-7811-00
515-7812-00
237-5975-04
266-5020-00
535-5203-03
3
545-5076-01
240-5102-00
545-5105-00
515-7309-01
237-5909-00
520-5344-00
520-5345-00
090-5004-ND
605-5006-00
99* 036-5611-11-F5
18
Description16
MAIN BRKT. BALL TROUGH
COIL BRACKET, BALL TROUGH
SCREW, 8-32 X 1/4" HWH SWAGE SERR
COIL RETAINING BRACKET
COIL SLEEVE
8-32 NYLON LOCK NUT
RUBBER BUMPER
PLUNGER ASSEMBLY
TROUGH BOARD #1 - ILED TRANSMITTER
TROUGH BOARD #2 - RECEIVER
COIL 27-1500 - NO DIODE
SHRINK TUBING 1/8"
CABLE TROUGH OPTOS
Qty
1
1
2
1
1
1
4
1
1
4
1
1
1
.42
FT.
1
Figure 5.9.1. Ball trough assembly - 500-9820-00 bill of materials.
PARTS REFERENCE
5.10FLIPPER ASSEMBLY, LEFT
5.11FLIPPER ASSEMBLY, RIGHT
500-6543-83-ND
500-6543-82-ND
1
1
2
2
5
5
3
3
4
4
6
6
8
8
7
7
9
9
13
13
13
13
11
10
14
14
10
11
Figure 5.10.1. Left flipper assembly 500-6543-02-ND bottom view.
Figure 5.11.1. Right flipper assembly 500-6543-12-ND bottom view.
ID Part Number
1 515-6617-01
Qty
1
ID Part Number
1 515-6617-00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
2
3
4*
4
5
6
7
8
9
10
11
12
13
14
14
515-6308-01
180-5149-00
090-5083-03-ND
090-5062-ND
269-5002-00
535-7354-00
265-5035-00
535-7356-00
545-5388-00
545-5070-00
545-5428-00
237-6144-00
515-7203-01
515-5133-06
515-6275-08-01
500-6307-10
Description
FLIPPER BASE PLATE LEFT KIT W/ BRACKET
MOUNT HARDWARE
COIL STOP BRACKET
SWITCH - END OF STROKE N/C
COIL-DUAL WINDING (500-6543-83-ND)
COIL-SINGLE WINDING (500-6543-15-ND)
SPRING WASHER
SWITCH RETURN SPRING BRACKET
SPRING FLIPPER RETURN
COIL SUPPORT BRACKET
COIL SLEEVE, FLIPPER
FLIPPER BAT BUSHING
FLIPPER BUMPER PAD
SET SCREW #10-32 x 3/4" SOCKET
PLUNGER/CRANK ASSEMBLY, LEFT
FLIPPER BAT AND SHAFT (500-6553-83-ND)*
FLIPPER BAT AND SHAFT RED MINI (500-654315-ND Assy)*
FLIPPER REBUILD KIT, LEFT
* Refer to game rubber chart for flipper rubber
color and part number.
Figure 5.11.2. Left flipper assembly 500-6543-83-ND BOM
515-6308-01
180-5149-00
090-5083-03-ND
269-5002-00
535-7354-00
265-5035-00
535-7356-00
545-5388-00
545-5070-00
545-5428-00
237-6144-00
515-7203-00
515-5133-06
500-6307-00
Description
FLIPPER BASE PLATE RIGHT KIT W/ BRACKET
MOUNTING HARDWARE
COIL STOP BRACKET
SWITCH - END OF STROKE N/C
COIL-DUAL WINDING
SPRING WASHER
SWITCH RETURN SPRING BRACKET
SPRING FLIPPER RETURN
COIL SUPPORT BRACKET
COIL SLEEVE, FLIPPER
FLIPPER BAT BUSHING
FLIPPER BUMPER PAD
SET SCREW #10-32 x 3/4" SOCKET
PLUNGER/CRANK ASSEMBLY
FLIPPER BAT AND SHAFT*
FLIPPER REBUILD KIT, RIGHT
* Refer to game rubber chart for flipper rubber
color and part number.
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Figure 5.11.3. Right flipper assembly 500-6543-82-ND bill of materials.
37
PARTS REFERENCE
5.12SLINGSHOT ASSEMBLIES
5.13SLINGSHOT FLASH ASSY - 02
500-9920-01
511-7643-02
9
10
4
1
11
ITEM
NO.
1
2
3
4
8
500-9924-00
"RIGHT"
12
3
2
500-9924-01
"LEFT"
4
5
6
3
5
7
ID
1
2
3
4
5
2
1
Figure 5.12.1. Sling shot core assembly explosion.
PART NUMBER
830-7029-02
550-5031-02
520-6785-00
237-5813-00
240-5303-00
PART NUMBER
515-5339-01
090-5044-ND
545-5031-00
535-5203-03
5
232-5301-00
6
180-5231-00
7
535-5045-00
8
237-5976-04
9
10
11
515-5340-01
270-5002-00
515-5338-00
12
266-5020-00
DESCRIPTION
Qty
BUTYRATE SET - 02
MINI MARS W/ EARS - RED SB
FLASH LAMP PCB
4-40 NYLON LOCK NUT
1
1
1
2
2
ITE
NO
1
2
3S
4
5
P
5.14SLINGSHOT FLASH ASSY- 04
511-7643-04
6
7
ITEM
NO.
1
2
3
4
5
6
7
8
4
1
2
Figure 5.12.2. 500-9920-01 sling shot assembly.
ID
1
2
3
4
5
6
Part Number
515-5339-01
090-5044-ND
545-5031-00
535-5203-03
232-5301-00
180-5231-00
7
8
9
10
11
12
535-5045-00
237-5976-04
515-5340-01
270-5002-00
515-5338-00
266-5020-00
Description
SLING SHOT BRKT ASSY
COIL SLEEVE
SLING SHOT SWITCH - 2 LUG - STANDARD
LUGS
SWITCH PLATE
SCREW, 6-32 X 5/8" HWH SWAGE
ARM & TIP ASSY
RETAINING RING - 1/4"
PLUNGER & LINK ASSEMBLY
Figure 5.12.3. Sling shot 500-9924-00, -01 bill of materials.
38
3
Qty
1
1
1
1
2
1
2
2
1
2
1
1
5
8
ID
1
2
3
4
5
6
7
PART NUMBER
830-7029-04
550-5031-02
520-6785-00
237-5813-00
240-5303-00
237-5506-00
254-5000-14
8
240-5005-00
DESCRIPTION
Qty
BUTYRATE SET - 04
MINI MARS W/ EARS - RED SB
FLASH LAMP PCB
4-40 NYLON LOCK NUT
SCREW, 6-32 X 1" PPH MS
NYLON SPACER - BLACK - 3/8 OD X .175
ID X 5/8"
6-32 NYLON STOP NUT
1
1
1
2
2
1
1
1
PART NUMBE
830-7029-04
550-5031-02
520-6785-00
237-5813-00
240-5303-00
237-5506-00
254-5000-14
240-5005-00
1
2
3
4
5
6
7
8
9
10
11
97*
98*
99*
535-1192-00
090-5001-ND
545-5076-01
515-9835-00
266-5047-00
535-5203-03
232-5300-00
180-5209-00
535-6539-00
237-5937-02
545-5105-00
605-5002-00
605-5006-00
036-6246-00
TEM NOT SHOWN
BRACKET, UP-POST VUK, STAR
COIL SLEEVE
PLUNGER ASSEMBLY, UP-POST VUK, STAR
COMPRESSION SPRING, POP BUMPER COIL
SUB MINIATURE SWITCH - SIM. ROLLER
RUBBER BUMPER
SHRINK TUBING 1/8" BLACK
SHRINK TUBING 1/8"
CABLE, GENERIC COIL W/ SWITCH
5.15POWER SCOOP
500-9812-ND
1
1
1
1
1
1
2
1
1
2
1
.083 FT.
.083 FT.
1
500-9965-00
UP-POST VUK ASSEMBLY
PARTS REFERENCE
5.16UP-POST VUK ASSEMBLY
500-9965-00
2
9
3
6
10
8
7
5
8
1
2
8
1
2
4
3
3
11
4
5
4
6
5
7
6
7
ID
1
2
3
4
5
6
7
8
99*
Part Number
515-9659-00
535-6173-00
232-5209-00
180-5057-00
535-6539-00
237-5806-00
244-5001-00
240-5301-00
036-5544-01
Description
POWER SCOOP WELDMENT, PRO
MICRO-SWITCH BRACKET
MICRO-SWITCH
SCREW, 2-56 X 1/2" PPH MS ZINC
#2 LOCK WASHER, SPLIT
2-56 HEX NUT
3" CABLE GENERIC SWITCH
Qty
1
1
2
1
1
2
2
2
1
ID
1
2
3
4
Part Number
535-1192-00
090-5001-ND
545-5076-01
515-9835-00
5
266-5047-00
6
7
8
9
10
11
97*
98*
99*
535-5203-03
232-5300-00
180-5209-00
535-6539-00
237-5937-02
545-5105-00
605-5002-00
605-5006-00
036-6246-00
Description
BRACKET, UP-POST VUK, STAR
COIL SLEEVE
PLUNGER ASSEMBLY, UP-POST VUK,
STAR
COMPRESSION SPRING, POP BUMPER
COIL
SUB MINIATURE SWITCH - SIM. ROLLER
RUBBER BUMPER
SHRINK TUBING 1/8" BLACK
SHRINK TUBING 1/8"
CABLE, GENERIC COIL W/ SWITCH
Qty
1
1
1
1
1
1
2
1
1
2
1
.083 FT.
.083 FT.
1
39
PARTS REFERENCE
5.17POP BUMPER ASSEMBLY
516-6784-XX
1
13
2
13
19
15
3
21
16
4
17
9
10
8
7
Part Number
515-6459-01L
515-6459-04-ND
Description
BUMPER/RING TOP ASSY, W/ LED 1
BUMPER BOTTOM ASSY, NO DIODE
Qty
1
1
ID
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Description
POP BUMPER SWITCH ASSY-2 - LUG-LEFT
6-32 NYLON STOP NUT
COIL - 26-1200
#6-32 X 1/4" SHWH SWAGE ZN
#6-32 NYLON STOP NUT
METAL YOKE STOP
* 8 X 1/2 SLT
PLUNGER, POP BUMPER
COMPRESSION SPRING, POP BUMPER
COIL SLEEVE
COIL BRACKET POP BUMPER ASSY
FIBER YOKE
METAL YOKE
#6-32 x 1-3/16" SPIRAL FIN SHANK SCREW
Qty
1
1
1
2
9
1
6
1
1
1
1
1
1
3
Figure 5.19.2. 516-6784-XX Pop bumper assy major subassemblies.
5
6
19
ID
1
3
4
5
6
7
Part Number
520-5307-03
545-5197-00
515-5085-00
266-5048-00
545-5195-00
545-5607-00
Description
POP BUMPER LED MODULE
BUMPER BODY
RING AND ROD ASSY
BUMPER SKIRT COMP SPRING
BUMPER BASE
BUMPER SKIRT
Qty
1
1
1
1
1
1
Figure 5.19.1. 515-6459-WN Pop bumper assy top bill of materials
40
Part Number
500-9934-01
240-5005-00
090-5044-ND
237-5976-01
240-5005-00
535-7347-00
234-5101-00
530-5348-00
266-5047-00
545-5031-00
515-5939-00
545-5609-00
535-7346-00
237-5957-00
Figure 5.19.3. 515-6549-04-ND Pop bumper bottom bill of materials
PARTS REFERENCE
5.18RIGHT RAMP ASSEMBLY
5.20LEFT RAMP ASSEMBLY
500-9955-00
500-9954-00
4
7
6
3
5
4
6
5
2
9
1
10
ITEM PART NUMBER
DESCRIPTION
QTY.
NO.
1 510-7528-00
RIGHT RAMP RIVETED ASSEMBLY LE
1
2 500-9936-03
GATE ASSEMBLY
1
3
3
2
9
4
4
3
232-5202-00
4
5
6
240-5005-00
242-5001-00
830-7029-51
7
511-7679-00
8
535-1174-00
9
535-1175-00
10
237-5809-00
SCREW, 6-32 X 1/2" PPH MS SEMS
6-32 NYLON STOP1NUT
#6 WASHER
BUTYRATE SET - 51
R/U SWITCH/ONE WAY GATE
ASSEMBLY
RIGHT RAMP, LEFT EDGE
PROTECTOR
RIGHT RAMP, RIGHT EDGE
PROTECTOR
SCREW, #6 X 1/2" PTH A
ITEM
NO.
1
2
3
4
5
6
7
8
9
8
8
8
3
1
1
PAR
510
500
240
232
242
830
535
535
237
1
1
7
1
3
8
4
ID
1
2
3
4
5
6
7
8
9
10
PART NUMBER
510-7528-00
500-9936-03
232-5202-00
240-5005-00
242-5001-00
830-7029-51
511-7679-00
535-1174-00
535-1175-00
237-5809-00
DESCRIPTION
Qty
RIGHT RAMP RIVETED ASSEMBLY LE
GATE ASSEMBLY
6-32 NYLON STOP NUT
#6 WASHER
BUTYRATE SET - 51
R/U SWITCH/ONE WAY GATE ASSEMBLY
RIGHT RAMP, LEFT EDGE PROTECTOR
RIGHT RAMP, RIGHT EDGE PROTECTOR
1
1
8
8
3
1
1
1
1
1
ID
1
2
3
4
5
6
7
8
9
Part Number
510-7527-00
500-9936-01
240-5005-00
232-5202-00
242-5001-00
830-7029-50
535-1176-00
535-1177-00
237-5809-00
Description
LEFT RAMP RIVETED ASSEMBLY
GATE ASSEMBLY
6-32 NYLON STOP NUT
#6 WASHER
BUTYRATE SET - 50
LEFT RAMP, LEFT EDGE PROTECTOR
LEFT RAMP, RIGHT EDGE PROTECTOR
Qty
1
1
4
4
2
1
1
1
2
5.21PAUL ASSEMBLY
511-7676-00
5.19AMPLIFIER ASSEMBLY
511-7674-00
2
2
ITEM PART NUMBE
NO.
1
880-6177-01
2
880-6172-01
3
4
4
5
3
ITEM
NO.
1
2
3
4
1
5
PART NUMBER
830-7029-14
880-6175-00
820-8380-33
820-8380-34
237-5833-00
DESCRIPTION
QTY.
BUTYRATE SET - 14
AMPLIFIER MODEL
DECAL SET - 33
DECAL SET - 34
SCREW, #4 X 5/8" PFH BLACK
1
1
1
1
1
4
5
ID
1
2
3
4
5
PART NUMBER
830-7029-14
880-6175-00
820-8377-33
820-8377-34
237-5833-00
DESCRIPTION
BUTYRATE SET - 14
AMPLIFIER MODEL
DECAL SET - 33
DECAL SET - 34
SCREW, #4 X 5/8" PFH - BLACK
Qty
1
1
1
1
4
ID
1
2
3
4
5
Part Number
880-6177-01
880-6172-01
265-5078-00
830-7028-35A
237-5840-00
Descripton
PAUL-LEGS
PAUL-TORSO
EXTENSION SPRING-NO LOOP
PAUL GUITAR
SCREW, #4 X 1/2" PFH AB
Qty
1
1
1
1
1
41
3
265-5078-00
4
5
830-7028-35A
237-5840-00
PARTS REFERENCE
5.22PLASTIC FLASH ASSY - 05
5.24PLASTIC ASSEMBLY - 08
511-7643-05
511-7643-08
2
ITEM
NO.
1
2
3
4
1
ITEM
NO.
1
2
3
4
5
1
2
5
PART NUMBER
830-7029-05
550-5032-07
520-6785-00
237-5813-00
240-5303-00
830-7029-05
550-5032-07
520-6785-00
237-5813-00
240-5303-00
ID
1
2
3
3
ID
1
2
3
4
5
PART NUMBER
DESCRIPTION
BUTYRATE SET - 05
HAT - ORANGE SB
FLASH LAMP PCB
4-40 NYLON LOCK NUT
Qty
1
1
1
2
2
DESCRIPTION
PART NUMBER
830-7029-08
254-5008-04
232-5201-00
DESCRIPTION
BUTYRATE SET - 08
HEX SPACER - 3/4
SCREW, 6-32 X 3/8" PPH MS
3 QTY.
BUTYRATE SET - 05
HAT - ORANGE SB
FLASH LAMP PCB
4-40 NYLON LOCK NUT
PART NUMBER
830-7029-08
254-5008-04
232-5201-00
1
1
1
2
2
DESCRIPTION
BUTYRATE SET - 08
HEX SPACER - 3/4 "
Qty
1
1
1
511-7643-09
4
6
ITEM
NO.
1
2
3
4
5
6
2
1
511-7643-06
PART NUMBER
830-7029-09
254-5008-04
232-5201-00
511-7676-00
237-5833-00
254-5008-07
DESCRIPTION
QTY
BUTYRATE SET - 09
HEX SPACER - 3/4 "
PAUL ASSEMBLY
HEX SPACER - 2"
1
3
5
1
4
2
3
3
5
ID PART NUMBER
1
830-7029-09
2
254-5008-04
3
232-5201-00
4
511-7676-00
ITEM
DESCRIPTION
QTY.
NO. PART NUMBER
1 830-7029-06
BUTYRATE SET - 06
1
5
237-5833-00
HEX SPACER - 2 1/8 "
1
2 254-5008-32
3 232-5201-00
SCREW, 6-32 X 3/8" PPH MS SEMS 1
6
254-5008-07
2
DESCRIPTION
BUTYRATE SET - 09
HEX SPACER - 3/4 "
PAUL ASSEMBLY
HEX SPACER - 2"
Qty
1
3
5
1
4
2
1
511-7643-10
3
2
1
ID
1
2
3
42
PART NUMBER
830-7029-06
254-5008-32
232-5201-00
DESCRIPTION
BUTYRATE SET - 06
HEX SPACER - 2 1/8 "
Qty
1
1
1
ITEM
NO.
1
2
3
3
ID
1
2
3
PART NUMBER
830-7029-10
254-5008-12
232-5200-00
DESCRIPTION
BUTYRATE SET - 10
HEX SPACER - 3/8 "
Qty
1
1
1
PART NUMBER
830-7029-10
254-5008-12
232-5200-00
DESCRIP
BUTYRATE
HEX SPACE
SCREW, 6-32 X 1
PARTS REFERENCE
511-7643-11
511-7643-28
5
4
1
ITEM
NO.
1
2
3
4
5
6
7
8
9
6
8
2
4
PART NUMBER
830-7029-11
254-5008-12
232-5200-00
550-5059-01
237-5510-00
545-5348-01
240-5005-00
550-5052-01
234-5000-00
DESCRIPTION
QTY.
BUTYRATE SET - 11
HEX SPACER - 3/8 "
1 6-32 X 1/4" PPH SEMS
SCREW,
PLASTIC POST - CLEAR
SCREW, 6-32 X 1-1/2" PPH MS
3/16 ID RUBBER RING
6-32 NYLON STOP NUT
MINI POST - CLEAR
SCREW, #6 X 3/8" HWH
1
2
2
2
2
2
2
1
1
2
7
3
9
3
ID
1
2
3
4
5
6
7
8
9
PART NUMBER
830-7029-11
254-5008-12
232-5200-00
550-5059-01
237-5510-00
545-5348-01
240-5005-00
550-5052-01
234-5000-00
DESCRIPTION
BUTYRATE SET - 11
HEX SPACER - 3/8 "
PLASTIC POST - CLEAR
SCREW, 6-32 X 1-1/2" PPH MS
3/16 ID RUBBER RING
6-32 NYLON STOP NUT
MINI POST - CLEAR
SCREW, #6 X 3/8" HWH
Qty
1
2
2
2
2
2
2
1
1
5
ID
1
2
3
4
5
PART NUMBER
830-7029-28
550-5032-07
520-6785-00
237-5813-00
240-5303-00
DESCRIPTION
BUTYRATE SET - 28
HAT - ORANGE SB
FLASH LAMP PCB
4-40 NYLON LOCK NUT
Qty
1
1
1
2
2
5.28BALL GUIDE ASSEMBLY - 03
511-7642-03
511-7642-04
1
3
ITEM
NO. PART NUMBER
1 535-1154-03
3
2
515-0215-00
3
4
237-5880-02
545-9815-00
DESCRIPTION
STAR BALL GUIDE - 03
LONG RANGE OPTO
EMITTER ASSEMBLY
SCREW, #6 X 1/2 PPH T-25
OPTO SENSOR PROTECTOR
QTY.
1
1
1
2
1
ITEM
NO
1
2
3
4
2
2
ID
1
2
3
4
Part Number
535-1154-03
515-0215-00
237-5880-02
545-9815-00
Description
LONG RANGE OPTO EMITTER ASSEMBLY
OPTO SENSOR PROTECTOR
Qty
1
1
2
1
ID
1
2
3
Part Number
535-1154-04
515-0215-01
237-5880-02
Description
LONG RANGE OPTO RECEIVER ASSEMBLY
Qty
1
1
2
43
DESCRIPTION
QTY.
PARTS REFERENCE1
ASSEMBLY, BALL LOCK TROUGH, STAR LE
1
BALL LOCK ASSEMBLY
KISS LE
500-9961-00
ASSEMBLY, BALL LOCK MOUNT, STAR LE
OR, HEAD BALL LOCK, STAR
1
5.311-BANK DROP TARGET W/TRIP 5.32BALL LOCK ASSY KISS LE
200 - NO DIODE
1
AINING BRACKET
1
EVE
1
Y.
500-9960-00
SSION SPRING-CONICAL
R & LINK ASSEMBLY, HEAD BALL LOCK, STAR
500-9960-00
1-BANK DROP TARGET W/ TRIP
1
1
WASHER - 1/2" O.D. X .062 THICK
2
NG E-RING, 3/16" SHAFT OD
2
N
1
BUMPER
1
8-32 X 3/8" PPH SEMS
18
10
9
17
2
2
3
NGE OPTO RECEIVER ASSEMBLY
4
NGE OPTO EMITTER ASSEMBLY
3
13
16
3
#6 X 3/8 PPH T-25
1
12
TE ASSEMBLY -18
25
26
5
GENE HEAD, MODIFIED, STAR
#4 X 1/2" PFH AB
12
1
23
6-32 X 1/2" PPH MS ZINC
2
15
19
11
1
10
5
21
500-9961-00
7
1
18
14
3
17
22
19
20
15
13
14
9
BOTTOM16PLATE
NOT SHOWN
7
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22
21
21
22
23
24
25
26
99*
44
PART NUMBER
515-0183-00
545-6163-01
545-6798-00
237-6169-00
545-6305-00
242-5091-00
266-5089-00
270-5002-00
535-9959-00
240-5102-00
545-5076-01
269-5002-00
090-5034-ND
530-5757-00
535-9760-01A
237-5985-00
266-5020-00
535-9777-01
237-5602-00
265-5003-03
237-5501-00
520-5252-01
520-5252-01
237-5501-00
535-0789-00
232-5300-00
515-9702-01-ND
237-5975-00
036-5605-07-E4
12
10
8
24
6
11
10
DESCRIPTION
FRAME ASSY, 1-BANK DT W/ TRIP
LEDGE, 1-BANK DROP TARGET
SHIM - FICHE PAPER - D.T. SINGLE
SCREW, 4-40 X 1/4 PPH MS
TARGET - ROLLOVER - BLACK
WASHER, 1/2 X 17/64 X .03 - DT
SPRING COMPRESSION - DT
STOP BRKT
8-32 NYLON LOCK NUT
COIL SLEEVE
SPRING WASHER
PLUNGER - D.T. ASSY.
LIFT BRKT - 1 BANK
SCREW, 10-32 X 3/8" HWH SWAGE
COIL BRACKET-DT-OD
TARGET RESET SPRING
1 BANK DROP TARGET PCB-OPTO
1 BANK DROP TARGET PCB-OPTO
BRACKET, TRIP COIL MOUNT, 1-DT
COIL ASSEMBLY, TARGET DROP, HEMMED
SCREW, 8-32 X 3/8" HWH SWAGE ZN
CABLE, DT W/ TRIP
Qty
1
1
1
2
1
3
1
2
1
4
1
1
1
1
1
1
1
1
2
1
2
1
1
2
1
2
1
1
1
8
2
5
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
20
4
6
PART NUMBER DESCRIPTION
510-7534-00
RIVETED ASSEMBLY, BALL LOCK
TROUGH, STAR LE
510-7533-00
RIVETED ASSEMBLY, BALL LOCK MOUNT,
STAR LE
545-9811-00
ACTUATOR, HEAD BALL LOCK, STAR
090-5044-ND
535-5203-03
545-5411-00
COIL SLEEVE
511-7673-00
PLUNGER & LINK ASSEMBLY, HEAD BALL
LOCK, STAR
266-5020-00
242-5003-00
#10 FLAT WASHER - 1/2" O.D. X .062
THICK
270-5001-00
RETAINING E-RING, 3/16" SHAFT OD
530-5720-04
PIVOT PIN
545-5105-00
RUBBER BUMPER
232-5301-00
515-0215-01
LONG RANGE OPTO RECEIVER ASSEMBLY
515-0215-00
237-5880-00
510-7526-18
BUTYRATE ASSEMBLY -18
237-5502-00
880-6171-01
MOLDED GENE HEAD, MODIFIED, STAR
237-5840-00
SCREW, #4 X 1/2" PFH AB
Qty
1
1
1
1
1
1
1
1
2
2
1
1
2
3
3
12
1
2
1
5
PARTS REFERENCE
5.33SOLENOID ASSEMBLY
5.35SPINNING DISK ASSEMBLY
511-7672-00
500-7144-03
8
11
6
12
9
13
7
6
ITEM NO.
10
1
3
7
2
8
5
2
515-9833-00
PAUL SOLENOID BRACKET
1
511-7699-00
MINI COIL ASSEMBLY
1
4
545-5442-00
MINI - COIL SLEEVE
1
5
266-5043-00
MINI EJECT SPRING
1
6
535-1186-00
SOLENOID RETAINING BRACKET
1
237-5976-01
SCREW, 6-32 X 1/4 HWH SWAGE
9
9
8
4
545-7287-00
GUIDE STRIP, DETONATOR, GRINDER
2
9
270-5003-00
1
10
545-5485-00
11
515-9834-00
RETAINING RING 5/16"
NYLINER-THOMSON 5/16 (5L1FF)
PLUNGER ASSEMBLY-PAUL
12
242-5078-00
WASHER, NYLON, .75 X .32 X .13
1
13
545-5348-52
RUBBER RING - 5/16" ID (WHITE)
1
10
4
1
Default/
QTY.
1
DESCRIPTION
PLUNGER STOP PLATE-STAR
3
7
ADD LOCTITE
PART NUMBER
515-9830-00
10
9
1
5
1
STERN PINBALL, INC.
2020 JANICE AVENUE MELROSE PARK, IL. 60160
TITLE
1
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
Part Number
515-9830-00
515-9833-00
090-5084-01
545-5442-00
266-5043-00
535-1186-00
237-5976-01
545-7287-00
270-5003-00
545-5485-00
515-9834-00
242-5078-00
545-5348-52
Description
PLUNGER STOP PLATE-STAR
PAUL SOLENOID BRACKET
MINI-COIL 27-950
MINI-COIL SLEEVE
MINI EJECT SPRING
SOLENOID RETAINING BRACKET
SCREW, 6-32 X 1/4 HWH SWAGE
GUIDE STRIP, DETONATOR, GRINDER
RETAINING RING 5/16"
NYLINER-THOMSON 5/16" (5L1-FF)
WASHER, NYLON, .75 X .32 X .13
RUBBER RING - 5/16" ID (WHITE)
Qty
1
1
1
1
1
1
9
2
1
1
1
1
1
511-7642-01
2
PAUL SOLENOID ASSEMBLY
511-7672-00
3
ID
1
2
3
4
5
6
7
8
9
10
Part Number
535-0278-02
515-7715-02
511-5190-00
237-6014-00
242-5028-00
515-7714-02
237-6092-00
545-9807-00
237-5995-00
242-5003-00
Description
MOUNTING BRACKET, STAR
MOTOR BRACKET, STAR
SOLDER ASSY SPINNING DISK MOTOR
M5 X 0.8 X 8 PH SELF LOCKING SCREW
WASHER NYLON .265 X .688 X .063
DISK/HUB WELDMENT, STAR
SET SCREW, 10-32 X 5/16, SOCKET CUP PT
ADHESIVE PAD - SPINNING DISK , STAR
#10-32 x 1/2 HWH NO SLOT SERR ZI
#10 FLAT WASHER - 1/2" O.D. X .062 THICK
Qty
1
1
1
4
1
1
1
1
2
2
511-7642-02
3
3
ITEM PART NUMBER
NO.
1 535-1154-01
1
2
515-0215-01
3
237-5880-02
DESCRIPTION
QTY.
LONG RANGE OPTO
RECEIVER ASSEMBLY
1
1
2
1
2
2
ID
1
2
PART NUMBER
535-1154-01
515-0215-01
3
237-5880-02
DESCRIPTION
LONG RANGE OPTO RECEIVER
ASSEMBLY
Qty
1
1
2
ID
1
2
3
PART NUMBER
535-1154-01
515-0215-00
237-5880-02
DESCRIPTION
Qty
1
1
2
45
PARTS REFERENCE
5.37ASSY ARCH WITH INSERT
5.39ASSY 4-BANK DROP TARGET
500-6005-H2
500-7204-01
8
6
1
7
4
9
6
23
18
ITEM
NO. PART NUMBER
16
4
3
5
5
2
ID
1
PART NUMBER
510-7532-22
2
3
4
5
6
7
8
9
240-5303-00
545-5212-04
830-7029-19
830-7029-20
820-8377-08
820-8377-09
820-8377-07
820-8377-06
DESCRIPTION
BOTTOM ARCH, STEEL W/ SPADE
BOLTS - WRINKLE BLACK
4-40 NYLON LOCK NUT
MYLAR PROTECT STRIP 7-5/8"
BUTYRATE SET - 19
BUTYRATE SET - 20
DECAL SET - 08
DECAL SET - 09
DECAL SET - 07
DECAL SET - 06
Qty
1
6
2
1
1
1
1
1
1
1
510-7532-22
2
3
4
5
6
7
8
9
240-5303-00
545-5212-04
830-7029-19
830-7029-20
820-8377-08
820-8377-09
820-8377-07
820-8377-06
8
10
15
DESCRIPTION
QTY.
22
BOTTOM ARCH, STEEL W/ SPADE
1
BOLTS - WRINKLE BLACK
4-40 NYLON LOCK NUT
6
13
MYLAR PROTECT STRIP 7-5/8"
2
BUTYRATE SET - 19
1
1
1 BUTYRATE SET - 20
DECAL SET - 08
1
DECAL SET - 09
1
2
DECAL SET - 07
1
DECAL SET - 06
1
3
14
19
21
20
12
ID
PART NUMBER
DESCRIPTION
1
545-6163-04
LEDGE, 4-BANK DROP TARGET
2
242-5091-00
WASHER, 1/2 X 17/64 X .03 - DT
3
266-5089-00
SPRING COMPRESSION - DT
4
545-6305-00
TARGET - ROLLOVER - BLACK
5
237-5501-00
6
240-5102-00
8-32 NYLON LOCK NUT
7
269-5002-00
SPRING WASHER
8
270-5002-00
9
266-5020-00
10
265-5003-02
TARGET RESET SPRING
11
535-9959-00
STOP BRKT
12
237-5602-00
13
237-6169-00
SCREW, 4-40 X 1/4 PPH MS
14
530-5757-00
PLUNGER - D.T. ASSY.
15
545-5076-01
COIL SLEEVE
16
520-5252-14
OPTO PCB, RT ANG CONN, 4-BANK DT
17
090-5034-ND
18
515-7771-01
DT FRAME ASSY, 4-BANK, STAR
19
535-9996-04
LIFT BRACKET - 4 BANK
20
535-9995-01
COIL BRACKET
ITEM PART NUMBER
DESCRIPTION
QTY.
NO.
21
237-5985-00
SCREW,
10-32 X 3/8" HWH SWAGE
1 510-7540-00
BACK PANEL BUTY ASSEMBLY
1
BACK PANEL BUTYRATE ASSEMBLY LE 1
2 511-7684-00
3 232-5201-00
2
22
545-6798-00
SHIM
- FICHE PAPER - D.T. SINGLE
#6 WASHER
2
4 242-5001-00
5 240-5005-00
6-32 NYLON STOP NUT
2
23
545-6798-01
SHIM - FICHE PAPER - D.T. DOUBLE
5.38BK PANEL PLASTIC EXIT ASSY
511-7685-00
1
5
2
3
ID
1
2
PART NUMBER
510-7540-00
511-7684-00
3
4
5
232-5201-00
242-5001-00
240-5005-00
46
4
DESCRIPTION
BACK PANEL BUTY ASSEMBLY
BACK PANEL BUTYRATE ASSEMBLY
LE
#6 WASHER
6-32 NYLON STOP NUT
Qty
1
1
2
2
2
11
7
17
9
Qty
1
12
4
4
8
4
1
8
1
4
1
2
5
1
1
1
1
1
1
1
1
1
1
PARTS REFERENCE
5.40DIVERTER COIL ASSEMBLY
500-9959-00
5.42RU SWITCH 1-WAY GATE ASSY
511-7679-00
8
4
5
12
3
6
ITEM PART NUMBER
NO.
4
5
11
8
9
1
10
3
11
2
6
ID
1
PART NUMBER
515-9825-00
2
3
4
5
6
7
8
090-5083-00-ND
535-7356-00
535-1185-00
530-7906-00
545-5388-00
269-5002-00
270-5005-00
9
10
11
12
242-5081-00
266-5102-00
232-5301-00
545-9814-00
DESCRIPTION
DIVERTER COIL BRACKET ASSEMBLY
COIL - PRI-SEC - NO DIODE
COIL BRACKET
DIVERTER LOCATOR
DIVERTER ROD
COIL SLEEVE
SPRING WASHER
RETAINING E-RING, 7/16" SHAFT
OD
WASHER - NYLON .75 OD x .44 ID
COMPRESSION SPRING
DIVERTER STOP
Qty
1
1
1
1
1
1
1
1
ID
1
2
3
4
5
6
7
8
DESCRIPTION
1 QTY.
DIVERTER COIL BRACKET
ASSEMBLY
2 090-5083-00-ND COIL - PRI-SEC - NO DIODE
COIL BRACKET
3 535-7356-00
4 535-1185-00
DIVERTER LOCATOR
5 530-7906-00
DIVERTER ROD
6 545-5388-00
COIL SLEEVE
SPRING WASHER
7 269-5002-00
7
RETAINING
E-RING, 7/16"
8 270-5005-00
2
SHAFT
OD
WASHER
NYLON
.75 OD x
9 242-5081-00
.44 ID
PART NUMBER
DESCRIPTION
10 266-5102-00
COMPRESSION SPRING
SCREW,
8-32
X 3/8"GATE
PPH
535-1200-00
BRACKET
- ONE
WAY
11 232-5301-00
SEMS
535-1201-00
WIRE FORM
GATE STOP
12 545-9814-00
DIVERTER
1
515-9825-00
535-1101-00
180-5010-04
237-5937-02
535-6539-00
535-1202-00
232-5201-00
1
1
1
1
1
1
1
1
1
1
4
1
SWITCH BRACKET
MICRO-SWITCH
SPACER
Qty
1
1
1
1
2
1
1
2
5.43BK PANEL PLASTIC ASSY LE
511-7684-00
3
9
6
3
2
1
1
4
1
8
8
2
8
5.41PAUL PLUNGER ASSEMBLY
1
5
7
515-9834-00
4
2
4
10
ID
1
2
3
4
Description
Qty
5
PLUNGER-PAUL
1
STERN PINBALL, INC.6
SPRING PIN, 3/32"D X 1"L, 18-8 SS 1
7
PAUL WIRE LINKAGE
1
8
515-9834-00
3
.063
PART NUMBER
530-7907-00
ID Part Number
1 530-7907-00
2DESCRIPTION
251-5037-00
Default/
QTY.
1
3PLUNGER-PAUL
535-1187-00
251-5037-00
SPRING PIN, 3/32"D X 1"L, 18-8 SS
1
535-1187-00
PAUL WIRE LINKAGE
1
1
2020 JANICE AVENUE MELROSE PARK, IL. 60160
TITLE
9
10
PART NUMBER
830-7038-98
830-7038-99
237-5511-00
240-5005-00
535-9750-00
237-5850-00
510-7526-97
254-5000-14
237-5983-01
240-5303-00
DESCRIPTION
BUTYRATE SET - 98
BUTYRATE SET - 99
SCREW, 6-32 X 1-3/4" PPH
6-32 NYLON STOP NUT
BRACKET, SIGN
SCREW, 6-32 x 3/8 PFH ZINC
RIVETED BUTYRATE ASSEMBLY - 97
NYLON SPACER - BLACK - 3/8 OD X
.175 ID X 5/8"
SCREW, 4-40 X 3/8" PFH MS, SS
4-40 NYLON LOCK NUT
Qty
1
2
6
8
2
2
1
12
2
2
47
SPECIFICATIONS
6. SPECIFICATIONS
500-55H1-01
SPECIFICATIONS, MECHANICAL, GAME SETUP SPECIFICATIONS, ENVIRONMENT
Specification
Weight
Max dimensions, leg levelers extended (h, w, d)
Minimum game dimensions (h, w, d)
Minimum room dimensions per game (h, w, d)
Imperial
210 lbs
78 x 27.75 x 57 in
Metric
96 kg
198 x 70.5 x 145 cm
76 x 27.75 x 57 in
193 x 70.5 x 145 cm
80 x 36 x 84 in
203 x 91 cm x 214 cm
• (h, w, d) = height, width, depth.
SPECIFICATIONS, MECHANICAL, BOXED
Specification
Weight, boxed (without
pallet)
Box dimensions (h, w, d)
Minimum dimensions (h,
w, d)
Imperial
230 lbs
Metric
105 kg
56.5 x 31 x 31 in
76 x 26 x 57 in
144 x 79 x 79 cm
193 x 66 x 145 cm
Temperature, Operating
Temperature, Storage
Relative Humidity, Operating
Relative Humidity, Storage
Minimum
32 ℉ / 0 ℃
32 ℉ / 0 ℃
5%
5%
Maximum
104℉ / 40 ℃
104℉ / 40 ℃
95% non-condensing
95% non-condensing
• (a) "The appliance has to be placed in a horizontal position."
• (b) "This appliance is not to be cleaned by a Water Jet."
• (i) "Do not locate this appliance in an area where a Water
Jet is used."
• (ii) "Do not clean this appliance with a Water Jet."
• (b) If the supply cord is damaged, it must be replaced in
order to avoid a hazard.
6.1 GAME DIMENSIONS
• (h, w, d) = height, width, depth.
SPECIFICATIONS, ELECTRICAL
Specification
Line Voltage, Nominal
Line Voltage Range
Line Frequency *
Line Power, Current attract mode
Line Power, Current nominal
Line Power, Current peak, <100 ms
North America 120VAC
120 VAC
90 VAC - 250 VAC
60 Hz
70 W, 0.6 A @ 120
VAC
360 W, 3 A @ 120 VAC
540 W, 4.5 A @ 120
VAC
International - 240VAC
240 VAC
90 VAC - 250 VAC
50 Hz, 60 Hz
70 W, 0.3 A @ 240 VAC
360 W, 1.5 A @ 240 VAC
540 W, 2.25 A @ 240 VAC
* NOTE: Games designed for 60hz operation (e.g. North America games) will not function correctly on 50hz power and vice
versa.
WARNING: Overloading electrical supply circuits is dangerous.
Do not overload circuits. To calculate the maximum number of
games for a circuit, check circuit amperage rating and divide
by the game Nominal Line Power Current rating for your line
voltage. For example, a 15A 120V household circuit, 15/3 A
(nominal current) = 5 games maximum.
48
SPECIFICATIONS
6.2 WARRANTY
500-55H2-01
Stern Pinball machines are assembled in Elk Grove Village, Illinois,
USA; each pinball machine has unique characteristics that make it
a one-of-a-kind American-made product. Each machine will have
variations in appearance resulting from differences in the machine’s
particular wood parts, individual silk screened art and mechanical
assemblies. Stern Pinball has inspected each game element to insure it
meets stringent quality and playability standards.
STERN PINBALL INC LIMITED WARRANTY
Stern Pinball Inc (‘SELLER’) warrants only to the initial purchaser of its
products that the items listed below are free from defects in material
and workmanship under normal use and service for the warranty period
specified:
• Printed circuit boards (game logic): 2 months
• Dot Matrix Display boards: 9 months
No other parts of seller’s product are warranted.
Warranty periods are effective from the initial date of shipment
from seller to its authorized distributors.
Seller’s sole liability shall be, at its option, to repair or replace
products which are returned to seller during the warranty periods specified, provided:
1. Seller is notified promptly upon discovery by purchaser
that stated products are defective.
2. Such products are properly packaged and then returned freight prepaid, to seller’s plant.
This warranty does not apply to any parts damaged during shipment
and/or due to improper handling, or due to improper installation or
usage, or alteration. In no event shall the seller be liable for any anticipated profits, loss of profits, loss of use, accidental or consequential
damages, or any other losses incurred by the customer in connection
with the purchase of a Stern Pinball Inc Product.
WARRANTY DISCLAIMER
Except as specifically provided in a written contract between seller and
purchaser, there are no other warranties, express or implied, including
any implied warranties of merchantability or fitness for a particular
purpose.
6.3 WARNINGS, COMPLIANCE,
AND LEGAL NOTICES
500-55H2-01
PHOTOSENSITIVE SEIZURES HEALTH WARNING
A very small percentage of people may experience a
seizure when exposed to certain visual images, including
flashing lights or patterns. Even people with no history of
seizures of epilepsy may have an undiagnosed condition
that can cause “photosensitive epileptic seizures” due to certain visual
images, flashing lights or patterns. Symptoms can include light-headedness, altered vision, eye or face twitching, jerking or shaking of arms
or legs, disorientation, confusion, momentary loss of awareness, and
loss of consciousness or convulsions that can lead to injury from falling
down or striking nearby objects.
IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU
EXPERIENCE ANY OF THESE SYMPTOMS.
PARTS SUBSTITUTIONS
For safety and reliability, substitute parts and equipment
modifications are not recommended and may void any and
all warranties. Use of Non-Stern Pinball Inc Parts or Modifications of
game circuitry may adversely affect game play or game safety. Transport pinball machines with hinged backbox in the down position only!
Always take great care when servicing any game. Always ready the service manual before replacing or servicing components. Substitutions
of parts or equipment modifications may void FCC type acceptance.
Always disconnect the line voltage before servicing. Some parts may
remain energized when unplugged. Take great caution when serving
any electrical components.
FCC CLASS A SUBPART J COMPLIANCE
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user
will be required to correct the interference at his own
expense.
RF INTERFERENCE NOTICE
The cable harness placements, ground strap routing, and other
shielding have been designed to keep RF radiation and conduction
within levels accepted by FCC rules. To maintain these levels, factory
harness position, shielding, and ground straps must be installed in their
factory locations should they become disconnected during maintenance.
COPYRIGHT AND INTELLECTUAL PROPERTY NOTICE
This document and the data disclosed herein or herewith is not to be
reproduced (Except where noted), used, or otherwise disclosed in
whole or in part to anyone without written consent of Stern Pinball Inc.
Products in this manual, the company name and devices and the design of the manual itself are protected by federal patents (and patents
pending), design registrations, trademarks, and copyrights. Action will
be taken in the event of infringement or imitation. The right is reserved
to change specifications without prior notice.
49
1-800-KICKERS
[email protected]
WWW.STERNPINBALL.COM
FACEBOOK.COM/STERNPINBALL
KISS LIMITED EDITION MODEL #500-55H2-01
MANUAL PART #780-50H2-01
08/18/15 EDITION
*780-50H2-01*

KISS LE Manual KISS LE Manual

Transcription

Similar documents

WWE Pro Operation and Parts Manual

KISS Pro Manual Kiss Pro Manual

CDX-M620 - Electronica.ro