mini CATALOGUE

Transcription

mini CATALOGUE

mini C A T A L O G U E
Twins
Self Ligation
Digital
Aesthetics
Tubes/Bands
Archwires
Auxiliaries
Lab Products
Practice Development
Education
ormcoeurope.com
Ormco’s innovative solutions exemplify our continuing efforts to improve the efficiency and
comfort of your care and the beauty and stability of your results. Our partnership with
you in this endeavor makes our work here at Ormco even more satisfying because our
mission of developing quality, progressive products goes hand-in-hand with your clinical
and personal goals. That’s why we invest heavily in research and development, set trends
rather than follow them and focus on how our products perform in your hands to provide
the best clinical outcomes.
www.ormcoeurope.com Toll free nr: 00800 3032 3032 Fax: 00800 5000 4000 Email: [email protected]
3
Chapter 1 Insignia Digital System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 57
Chapter 2 Appliance Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 13
Content
Content
Section 1 Damon System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14
Damon Clear Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 16
Damon Q Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 18
Snaplink Buccal Tubes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 20
Titanium Buccal Tubes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 21
Damon Arch Form Archwires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 22
Section 2 Straight-Wire System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 25
Prodigy Bracket S/L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 27
Nexus Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 29
Nexus Clear Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 30
Nexus Metal Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 31
Straight-Wire Synthesis Bracket. . . . . . . . . . . . . . . . . . . . . . .Page 32
Mini Twin Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 34
Buccal Tubes and Archwires. . . . . . . . . . . . . . . . . . . .Page 36
Section 3 Orthos System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 37
TItanium Orthos Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 38
Bios Titanium Ortho Brackets. . . . . . . . . . . . . . . . . . . . . . . . .Page 39
Metal Orthos Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 40
Titanium Orthos Buccal Tubes. . . . . . . . . . . . . . . . . . . . . . . .Page 41
Orthos Accent Buccal Tubes. . . . . . . . . . . . . . . . . . . . . . . . . .Page 42
Tru-Arch Form Archwires. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 43
Section 4 STB Lingual System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 45
STB Light Lingual System. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 46
STB Straight-Wire System. . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 46
Lingual Archwires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 48
Chapter 3 Aesthetic Appliances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 49
Section 1 Inspire ICE Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 50
Section 2 Simpli 5 Express Aligner Treatment. . . . . . . . . . . . . . . . . . . . . . . .Page 52
Chapter 4 Other Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 53
Mini-Diamond Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 54
Mini-Diamond Brackets with vertical slot. . . . . . . . . . . . . . . . .Page 56
Tweed Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 56
Chapter 5 Bonding and Curing Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 57
Chapter 6 VectorTAS Temporary Anchorage System. . . . . . . . . . . . . . . . . . . . .. . . . .Page 61
5
6
Chapter 1
Insignia
Digital System
7
Tailor-Made Orthodontics
Start with a vision of the result!
INSIGNIATM is a system for designing tailor-made devices associated with a fully interactive piece of
software, designed to offer each patient a tailor-made smile.
This is a specific procedure which delivers clinical efficacy and optimum practice for the treatment,
from start to finish.
Whichever system you use (Damon, Orthos, ICE, conventional systems, etc.),
INSIGNIA TM associates your treatment plan and the virtual 3D set-up
manager, in order to provide you with the ideal occlusion for your
patient.
What you see
is what you get
INSIGNIATM is the only system to offer a fully tailormade solution:
• Specific brackets for each patient
• Computer-assisted bracket placement
• Time-saving tailor-made arcs which reduce the
adjustments required during the different
treatment phases.
It makes the complicated cases more easy to manage
and provides exceptional results for the
easier cases.
INSIGNIATM is the perfect agreement between your
professional experience and your patient’s wishes.
www.insigniasmile.com
8
Wires
• Metal
• Ceramic
• Copper Ni-Ti • TMA
Training for Success
To begin your journey into Insignia a convenient
three-step curriculum has been devised to make
your transition into the Approver software easy
and effective.
Phase 1
Using the Insignia case submission portal, MyInsigniaOrtho.com, offices work with a reputable
Digital Solutions Specialist to set up their case
preferences and complete their profile setup.
Cases will be submitted through this portal to the
Insignia Smile Design Lab.
Phase 2
• Ni-Ti
• Stainless Steel
Phase 3
Precision bracket placement guides are one of the
best features of Insignia. The placement guides
give the user the ability to directly bond brackets
in the most precise position for the best results
according to the approved treatment plan. A
critical step for success, the Ormco Sales Representative or Digital Solutions Specialist will be present
for the initial Insignia bonding. In some states and
countries, office workflow may be streamlined by
allowing key staff members to perform bonding.
It is recommended that both the orthodontist and
staff participate in this session. Additionally we
suggest that this bonding day is scheduled on a
day when other patients are not being seen.
Insignia Digital System
Traditional Twin Appliances
• Metal
• Ceramic
Chapter 1
Self-Ligating Appliances
After cases are submitted, the most optimal result
for that patient is created and submitted to the
orthodontist for review. Through the use of
Insignia Approver, the doctor is able to view, edit
and incorporate their own treatment mechanics
to perfect the smile before custom brackets and
wires are manufactured.
After the initial case submission, a webinar is
scheduled with our team of Digital Solutions
Specialists to learn how to navigate through
the software for efficient review and approval
process. Great attention to detail is given to
the doctor’s own case, this resource is available
beyond the initial case whenever the need for
advice may arise.
• Review cases in the 3-D software, Insignia
Approver
• Utilize software features and how they affect
the treatment plan
• Learn how to make design changes to a
treatment plan
• Understand how to make changes to a treatment
plan and submit for completion
Auxiliary Products and Marketing Material
Insignia SL 180° Bent Hook, 30 per pack242-0050
Insignia SL 90° Bent Hook, 30 per pack
242-0060
Insignia Shipping Box
762-6999
Suggested Approver Process (English)
762-7011
White Paper (English)
762-6166
Bonding Protocol (English)
762-7001
Patient Brochure (English)
762-6085
Insignia Doctor Brochure (English)
762-6060
9
Chapter 1
•
Is a helpful diagnostic tool and puts full control of case
design into your hands
•
Heat N Bite mid-treatment self check
Ensures on-time, predictable treatment outcomes
•
AOA’s unique aligner material
Eliminates manufacturing striations resulting in highly
aesthetic, truly clear aligners
•
Final smile design
Can be viewed in the software prior to treatment - a
powerful consultation tool
•
Flexible, cost-effective
Treatment choices available with a single- or dual-arch
option.
The Insignia
Clearguide Difference
The Insignia Clearguide aligner system combines the
technology of Ormco’s Insignia Advanced Smile Design™
software and AOA aligner engineering expertise. Use your
creative, artistic skill to custom-design the perfect smile
for each individual patient. The software incorporates
your desired outcome into the final design of the aligner
sets to create predictable, comfortable tooth movements
and beautiful smiles.
Upper Arches
Case Selection
To meet the needs of today’s imageconscious patients, Insignia Clearguide
Express is designed for aesthetic alignment
of the upper and lower anterior teeth.
Single-arch cases can be built to satisfy
patients who require high aesthetics but
may also need fixed appliance treatment
on the opposing arch.
Lower Arches
The Only Aligner System
that PutsYou in the Driver’s Seat
Insignia Clearguide contributes a significant advancement
to orthodontic aligners. Now, you have full control of your
cases throughout treatment. From the initial case set-up
where you can physically make finite design changes to
mid-treatment self-check using Heat N Bite technology,
Insignia Clearguide completes patient treatment on time
and on track with your design.
10
Insignia user-friendly software
•
Proprietary Insignia
Clearguide aligner material creates virtually invisible
aligners vs. competitor aligners.
Insignia Clearguide Express
Competitor Product
How does it compare?
Heat N Bite Mid-Treatment Self-Check
Insignia Clearguide Express incorporates a unique, effective
midtreatment step that monitors patient tooth movement
throughout treatment.
Aligners are provided in phases depending on the number
required to complete treatment. In between phases, a
Heat N Bite is taken to make appropriate adjustments to
subsequent aligner sets. This ensures treatment remains
on track, avoiding the need for costly and timeconsuming
reboots/restarts.
• No course certification or annual education requirements
•
Insignia
Clearguide Express
Chapter 1
The initial case is set up per your preferences and
impression data. Customize smiles for each individual
patient using the Insignia Approver software. You can
affect changes to a tooth’s position including tip, torque,
rotation, in/out, occlusal/gingival, and mesial/distal.
Changes you make are reviewed by an Insignia Smile
Design Technician and then forwarded back to you for
review and final approval.
No minimum case requirements
• No start-up or licensing costs
• Phased training personalized to you and your schedule
Guided Instruction
We’re here for you! Insignia Clearguide Express puts
design control in your hands but not without the
support you need to design great cases. Whether you
are new to Insignia or desire a refresh on the newest
features of the software, we are pleased to offer
“phased” training that works with your schedule to
meet your specific needs in the most convenient way.
Pretreatment
User Interface
Lead Time
Tooth Movement
# of Aligners
Single Arch Option
Posttreatment
InsigniaTM Clearguide TM Express
Yes, allows doctors to make
movements on screen
Invisaling® Express 10
Simple 5TM
Yes, however, doctors
must call/email to make
changes to the case
No
4 weeks
4 weeks
4 weeks
Up to 2.5mm/tooth
Up to 2mm/tooth
Up to 2.5mm/tooth
Up to 20
Up to 20
5 to 10
No
Yes
Yes
Marketing Material
Suggested Approver Process (English)
762-6210
Clinician Manual (English)
762-6230
Digital Training Brochure (English)
762-6240
Doctor Brochure (English)
762-6220
11
The Systems of Equipments
Chapter 2
Chapter 2
Appliance
Systems
13
Section 1
Damon System
14
passive self-ligation
Damon System
The Damon Ormco system is the combination of
a high-technology, self-ligating, passive bracket
and tubes and arcs with light forces. These forces
work in synergy with the facial muscles and are
set to cause dental movement and stimulate
cellular activity without cutting off the blood
supply.
The Damon brackets are real biplot brackets that
are reliable and easy to use. They have a slider
which holds the arc without compressing it.
Unique point: lighter forces
The arc is not tight. It exerts its full potential
using lighter forces. Friction is significantly
reduced and dental displacement is controlled
perfectly.
This is achieved in combination with the work of
the muscles and tissues. The Damon system takes
the unique characteristics of each patient into
account and provides results that are clearly more
effective than those for conventional brackets.
Chapter 2 - Section 1
The system: an easy-to-use
self-ligating system
Results:
The treatment options are reduced, the results
are faster, the patient is more comfortable and
it is possible, in many cases to avoid having to
use heavy force mechanics and extracting teeth.
This combination, when used with advanced
techniques, may be incorporated into any
contemporary orthodontic practise in order to
provide optimised results.
15
Damon Clear Brackets
Damon Clear combines the clinically proven
low-friction properties of passive self-ligation
technology with the aesthetics that today’s
image-conscious patients demand. The result is a
crystal-clear appliancethat surpasses expectations
in beauty and functionality. Damon Clear – the
true innovation in clarity
Fast and Easy Wire Changes
Clear Performance
• Completely aesthetic passive self-ligation
bracket with unparalleled design.
• Polycrystalline alumina (PCA) material is
impervious to staining and discoloration from
coffee, mustard, red wine and other agents.
• Eliminates the need for elastomerics, which stain
and collect bacteria during treatment.
• Advanced passive self-ligation technology with
low ligation force, minimizing frictional
resistance for more efficient tooth movement.
Enhanced Strength
• Innovative SpinTek™ slide employs reciprocal
forces during opening for fast, comfortable wire
changes and adjustments.
• To open the slide, a simple twist using the
SpinTek Opening Instrument disperses forces in
opposite directions for a net force of 0 kg – even
with calculus buildup.
• Other self-ligation brackets require unidirectional
forces to open theslide, exerting up to 1.34 kg of
pressure that can cause extreme -patient discomfort.
Precision Bracket Placement
Low Torque
• Sturdy construction with fortified slide, window
channel and tiewings for exceptional strength
and durability.
• Four solid walls enable effective torque expression
and rotation control for meticulous finishing.
Comfort Fit
Encoche
Standard Torque
3 mm
4 mm
Super Torque
5 mm
6 mm
7 mm
• Removable positioning gauge with s caler notch
and rhomboid-shaped bracket and pad guide
bracket placement for smile arc enhancement.
• Color-coded positioning gauges on brackets
(3-3) denote torque values.
16
• Smooth, rounded contours for outstanding
patient comfort.
• Customized base design with patented laseretched pad provides optimal bond strength
for greater reliability.
• Optional brackets with discrete contoured hooks
for elastics and other auxiliaries.
• Fast, comfortable debonding experience for
patients when using the Damon Clear Debonding
Instrument; no flashremoval using a burr or
scaler required.
Damon Clear : Marketing Material
762-6116
762-6180
Hygiene White Paper for Doctors (English)
762-6260
Mantaining the Beauty White Paper for Patients (english) 762-6250
White Paper (English)
762-6131
Damon Photo Album (English)
762-6190
Consultation Model x14 Damon Clear™ 717-0125
Consultation Model Damon Clear™
717-0115
MesialDistal
Mesial-distal
(Incl. Pad)
Buccal.-lingual
(Incl. Pad)
Occlusal-Gingival
(Tiewing-Tiewing)
Occlusal-Gingival
(Under Tiewing))
3,505 mm
3,505 mm
2,667 mm
3,962 mm
3,048 mm
0.138”
3,505 mm
2,718 mm
3,962 mm
3,048 mm
0.138”
3,505 mm
2,464 mm
3,962 mm
3,048 mm
0.138”
3,505 mm
2,616 mm
3,962 mm
3,048 mm
Slot Size
U1
U2
U3
U4-U5
.022 x
.028”
.022 x
.028”
.022 x
.028”
.022 x
.028”
Maxillary
Torq. Ang.
Rot.
In/out
.022 L
.022 R
Central* Low
+2° +5° 0° .040” 497-6463
497-6462
Central Std
+15° +5° 0° .040” 497-6461
497-6460
Central*
Super
+22° +5° 0° .040” 497-6467
497-6466
Lateral* Low
-5° +9° 0° .043” 497-6473
497-6472
Lateral Std +6° +9° 0° .043” 497-6471
497-6470
Lateral* Super
+13° +9° 0° .043” 497-6475
497-6474
Cuspid*
Low
-9° +5° 0° .030”
497-6483
497-6482
Cuspid with Hook*
Low
-9° +5° 0° .030”
497-7483
497-7482
Cuspid* Std
+7° +5° 0° .030” 497-6481
497-6480
Cuspid with Hook*
Std +7° +5° 0° .030” 497-7481
497-7480
Cuspid Super +11° +5° 0° .030” 497-6485
497-6484
Cuspid with Hook*
Super +11° +5° 0° .030” 497-7485
497-7484
Bicuspid*
Std
-11° +2° 0° .030”
497-6491
497-6490
Bicuspid with Hook*
Std
-11° +2° 0° .030”
497-7491
497-7490
Mandibular
Torq. Ang.
Rot.
In/out
.022 L
.022 R
ID Dot
Tooth
ID Dot
Central Std
-3° +2° 0° .0445” 497-6411
497-6410
Lateral Std
-5° +4° 0° .0445”
497-6421
497-6420
Cuspid Std
-7° +5° 0° .0315” 497-6431
497-6430
1° Bicuspid
-28° +2° 2° 449-1015
449-0015
2° Bicuspid -10° 0° +5° 449-2127
449-2027
-22° 0° +5° 449-1205
449-0205
2° Bicuspid .
Bracket Dimensions
Bracket ID Dot
Damon Clear : Practice Materials
SpinTek™ Opening Tool**
866-4014
SpinTek Opening/Closing Tool**
866-4016
Damon Clear Debonding Instrument
866-4019
Blugloo™ Adhesive Syringe Kit
740-0274
Blugloo™ Adhesive Unidose™ Kit 740-0275
Module elastomerici Damon Size 1 / gray
637-0011
Module elastomerici Damon Size 1 / clear
637-0012
Module elastomerici Damon Size 2 / gray
637-0021
Module elastomerici Damon Size 2 / clear
637-0022
5 4
4 3
3 2
2 1
1
5
51 42 33 24 15
5
5 4
4 3
3 2
2 1
1
51 42 33 24 15
Les points de couleur sont situés sur les ailettes de chaque bracket.
** : For use with Damon Q brackets and SnapLink tubes.
Damon Clear brackets are packaged in QUAD sticks
More than straight teeth
17
Damon Q Brackets
Brackets Damon Q
Each positioning gauge is
color-coded to aid in bracket
selection and torque value
identification.
•Green : •Blue : Low Torque
•Red :
Super Torque
Standard Torque
Quality Comfort and Aesthetics
• Small bracket profile and size with smooth,
rounded corners help prevent occlusal
interference while offering patients greater
comfort and aesthetics.
Quick and EasyWire Changes
• Innovative SpinTek slide with chamfered
lingual leading edge facilitates easy slide
closure and wire engagement throughout all
phases of treatment.
•
Flatter, smaller profile.
•
Throat depth optimised for accurate finishing.
•
New, very innovative, SpinTekTM sliding door
fitted with a bevelled attack edge, facilitating
the insertion of the arc.
•
Positioning gauge for more accurate gluing.
•
Two auxiliary throats for new treatment
applications.
Quintessential Performance and Reliability
•
Four solid walls with optimized slot depths –
including tighter tolerances on lower anterior
brackets – offer improved rotation control and
fast, low-friction tooth movement for superior
finishing.
•
S pinTek slide requires only a slight twist to
open, transferring reciprocal forces to the
bracket – not the tooth – for faster wire
changes and greater patient comfort.
Active self-ligation brackets exert up to 1.34 kg
of unidirectional force during slide opening.
But Damon Q’s SpinTek slide disperses forces in
opposite directions for a net force of 0 kg –even
despite calculus buildup.
Easy to Open
Easy to Close
• Stainless steel 17-4 metal-injection-molded
construction provides exceptional strength
and durability.
A Quantum Leap in Efficiency
• Horizontal and vertical auxiliary slots provide
greater versatility for treatment involving
high cuspids, blocked-out laterals and more.
Incorporate drop-in hooks, piggyback wires
or TAD auxiliaries – all while progressing
through the Damon archwire sequence of
round and rectangular wires.
To open, insert the SpinTek slide instrument into the slide release
cavity and twist 90º.
To close,position the instrument on either side of the slot and
squeeze the opposing prong.
• Removable positioning gauge, rhomboidshaped bracket and pad, and vertical scribe
line guide precision bracket placement for
smile arc enhancement.
Damon Q : Marketing Material
18
762-4927
070-5378
Damon Photo Album (English)
762-6190
Damon Q Consult Model 717-0124
Damon Q Typodont
717-0114
Damon Q Brackets
Drop-in Hooks (U/L5-5)
SpinTek™ Opening Tool
SpinTek ™ Opening/Closing Tool
Debonding / repositioning tool Elastomeric modules Damon Size 1 /
Elastomeric modules Damon Size 1 /
Grengloo™ adhesive kit - syringes
Grengloo™ adhesive kit - unidoses
242-0114
866-4014
866-4016
866-4008
637-0011
637-0012
637-0021
637-0022
740-0320
740-0322
grey
clear
grey
clear
* : For use with Damon Q brackets and SnapLink tubes.
Maxillary
Torq.
Central
Ang.
Low+2°+5°
.022 L
.022 R
0°
491-6463
491-6462
0°
491-6461
491-6460
Central
Standard
+15°
Central*
Super
+22°
+5°
0°
491-6467
491-6466
Lateral
Low
-5°
+9°
0°
491-6473
491-6472
0°
491-6471
491-6470
Lateral
+5°
Rot.
Standard+6°+9°
Lateral*
Super
+13°
+9°
0°
491-6475
491-6474
Cuspid
Low
-9°
+5°
0°
491-6483
491-6482
0°
491-6481
491-6480
Cuspid
Standard+7°+5°
0°
491-6485
491-6484
Bicuspid-11° +2°
Cuspid
Super
0°
491-6491
491-6490
Bicuspid O/G
-11°
+2°
0°
491-6591
491-6590
Bicuspid – Weldable
-11°
+2°
0°
161-8491
161-8490
.022 L
.022 R
Mandibular
+11°
+5°
Torq. Ang.
Central
Low
Central
Lateral
Rot.
-11°
+2°
0°
491-6415
491-6414
Standard
-3°
+2°
0°
491-6411
491-6410
Low
-11°
+4°
0°
491-6425
491-6424
Lateral
Standard
-3°
+4°
0°
491-6421
491-6420
Cuspid
Low
0°
+5°
0°
491-6433
491-6432
Cuspid
Standard
+7°
+5°
0°
491-6431
491-6430
Cuspid
Super
+13°
+5°
0°
491-6435
491-6434
1st Bicuspid Standard
-12°
+4°
0°
491-6441
491-6440
Super
-5°
+4°
0°
491-6443
491-6442
1st Bicuspid – O/G
Standard
-12°
+4°
0°
491-6541
491-6540
1st Bicuspid – O/G Super
-5°
+4°
0°
491-6543
491-6542
1st Bicuspid – Weldable
Standard
-12°
+4°
0°
161-8441
161-8440
1st Bicuspid – Weldable
Super
-5°
+4°
0°
161-8443
161-8442
2nd Bicuspid
-17°
+4°
0°
491-6451
491-6450
2nd Bicuspid – O/G
-17°
+4°
0°
491-6551
491-6550
1st Bicuspid
Auxiliary Products
Bracket ID Dot
5 4
4 3
3 2
2 1
1
5
51 42 33 24 15
5
5 4
4 3
3 2
2 1
1
51 42 33 24 15
Damon Q brackets are packaged in QUAD sticks
Color dots are located on the tie wings of each bracket.
More than straight teeth
19
Buccal Tubes Snaplink
Buccal Tube Snaplink
Decrease chair time with faster wire
changes
•
•
Increase patient comfort
Innovative slide design requires only a slight twist
to open, transferring reciprocal forces to the tube
– not the tooth – for greater patient comfort. Low
profile with rounded corners and angled highretention hook minimize occlusal interference.
Tie less. Control more! Whether you treat with
conventional twins or selfligating brackets, the
SnapLink re-convertible tube helps you gain more
control and treat patients more efficiently.
Eliminate the ties that bind for the ultimate in
efficiency and comfort! When it’s time to engage
second molars, clinicians universally understand
the inconvenience of convertible buccal tubes.
They often require frequent tying of ligatures – or
even downsizing to a smaller wire. That can be
labor intensive and mean longer appointments.
Meanwhile, the loss of a traditional four-walled
tube creates binding and friction in the posterior
region, which can result in less efficient tooth
movement and extended treatment time. But
the tie-less, low-friction SnapLink tube makes
wire changes and posterior tooth movement a
snap. SnapLink provides the exact functionality
of a traditional four-walled tube without any
unwanted friction or binding. With SnapLink,
it’s easy to engage second molars, even when
making compensating archwire bends or loops.
And placement of auxiliaries like wire-to-wire
Class II appliances can be performed without
removing wires. That means shorter appointments
for you and faster, more comfortable treatment
for your patients.
Convert and re-convert for more effective
treatment
ual functionality allows you to convert the tube
D
to easily engage second molars with either round
or rectangular archwires, or place auxiliaries while
maintaining your patient’s natural wire sequence.
Convert and reclose as often as needed!
Improve sliding mechanics and gain greater
control
•
•
20
Tie-less tube saves valuable chair time by eliminating the arduous task of tying and retying
igatures.
Chamfered mesial slot opening enables easy wire
engagement and removal even when the slide
is closed.
Tie-less tube reduces friction for smoother
sliding mechanics.
F our solid walls provide the control of a
standard tube for faster, more predictable
posterior tooth movement.
Increase bond reliability
Contoured base with 80-gauge mesh pads
eliminate“rocking” for more reliable bond retention.
Easy connection to second molars
Convertible tubes require frequent tying of
ligatures once the cap has been removed, which
results in lengthy wire change appointments,
especially for cases involving impacted second
molars. The SnapLink re-convertible tube eliminates
the need for constant tying, making it easy to
connect to second molars – even when making
wire bends – without downsizing to a smaller wire.
Easy to open!
Simply insert the flat end of the opening
instrument into the slide release cavity and twist
90º. The tube, not the patient’s tooth, absorbs
the forces.
Easy to close!
Position the grooved tines of the instrument on
either side of the slot and engage the archwire.
Gently squeeze the opposing prongof the
instrument and listen for the audible click to
confirm the slide is closed.
90˚
SnapLink : product accesories
Opening Instrument SpinTek™*
866-4014
Opening/Closing Instrument SpinTek™*
866-4016
* : for Damon Clear & Damon Q™ Brackets and SnapLink™ Tubes.
Tubes
Torq.Ang.Rot.
.022 G
.022 D
Maxilary
-18º
0°
+12°
438 2161
438 2160
Mandibulary
-28º
+2°
+2°
438 2191
438 2190
B
D
A
E
F
C
A/ P ad Size – The largest pad size available
provides improved bond strength and a better
fit to the tooth.
B/ Teardrop Design – Buccal tubes on the lower
arch feature a teardrop design to keep them
out of occlusion. There are also no tie-wings to
create food traps and inhibit patient comfort.
C/ C
omfortable Hook Design – The Ormco hook
design tilts away from the gingiva to avoid
impingement and enhance patient comfort.
The Material
As resistant as steel and possessing an equivalent
friction index, titanium is twice as resilient.
Titanium isolates the adhesive layer and the
tooth from impact forces, thus providing greater
bonding reliability and increased patient comfort.
Titanium is also known for its biocompatibility
and wettability.
D/ Handling Notch – A unique notch
on the occlusal side makes holding the
Titanium buccal tube a cinch and helps with
initial placement on the tooth.
E/ In-Face Funneled Slot Opening – A patented
funneled slot opening makes archwire
engagement easy without added size.
Titanium Buccal Tubes
The Tube
Titanium Buccal Tubes
F/ I.D. System – The I.D. dot is compatible with
the legendary Orthos system.
Upper
Torque Angle
Distal Offset
Fist Molar
-18°
0°
Second Molar
-27°
0°
Lower
Torque Angle
Fist Molar
-28°
+2°
.022 L
.022 R
+12°
449-1011
449-0011
+6°
449-1203
449-0203
.022 L
.022L
449-1015
449-0015
Distal Offset
.018 L
.018 L
+2°
.018 R
.018 R
Second Molar
-10°
0°
5°
449-2127
449-2027
Second Molar
-22°
0°
5°
449-1205
449-0205
Available in Quad packaging
21
Damon Arch Form Archwires
This shape was designed by Dr. Dwight Damon in
accordance with the following principles:
• A lovely smile needs six anterior teeth to be
positioned correctly and the premolars and the
mesiobuccal surface of the first molar to be
clearly visible.
• The arc shape should avoid the Black Corner
Syndrome in the lower sectors.
• What is more, this shape should meticulously
follow the gnathological principles and promote
dental function.
When combined with the new generation of
Damon passive self-ligating brackets and the arc
sequences inherent to this system, this arc shape
increases the no-extraction treatment options.
Copper Ni-Ti Archwires with stops
.013 round section
Damon Optimal Force
205-1909
.014 round section
Damon Optimal Force
205-1902
.016 round section Damon Optimal Force
205-1903
.018 round section
Damon Optimal Force
205-1904
.014 x. 025 Damon Optimal Force
210-1905
.016 x. 025 Damon Optimal Force 210-1906
.018 x. 025 Damon Optimal Force
210-1907
Copper Ni-Ti Archwires with stops
22
.016 x. 025 34 mm Damon Ni-Ti
20º Anterior Torque**
227-0341
.017 x. 025
34 mm Damon Ni-Ti20º Anterior Torquer**227-0342
.019 x. 025 34 mm Damon Ni-Ti20º Anterior Torquer**227-0343
.016 x. 025 34 mm Damon Ni-Ti Reverse Curve
20º Anterior Torque**216-3416
.016 x. 025 Damon Ni-Ti Reverse Curve**
216-3806
216-3807
216-3809
** : in packs of 5. All other wires are in packs of 10
Damon TMA Low-Friction 227-1111
.017 x. 025 Damon TMA Low-Friction 227-1112
.019 x. 025 Damon TMA Low-Friction 227-1113
.016 x. 025 Damon TMA Low-Friction Purple **
227-1141
.017 x. 025 Damon TMA Low-Friction
Purple **
227-1142
.019 x. 025 Damon TMA Low-Friction Purple **
227-1143
.016 x. 025 Damon TMA Low-Friction Honeydew **
227-1151
227-1152
227-1153
Stainless Steel Archwires
.016 x. 025 Damon Stainless Steel sans encoche médiane 227-1067
.019 x. 025 Damon Stainless Steel sans encoche médiane 227-1071
.016 x. 025 24 mm Damon Stainless Steel avec 2 pitons pré-soudés 227-1026
.019 x. 025
26 mm Damon Stainless Steel avec 2 pitons pré-soudés 227-1029
.016 x. 025 Chapter 2 - Section 1
TMA Archwires
** : in packs of 5. All other wires are in packs of 10
23
Straight-Wire System
Section 2
Straight-Wire
System
25
Torque-In-Base
Straight-Wire Appliances are all founded in the
original principles of Dr. Andrews. That means
that any A+ Straight-Wire Appliance is built
upon three key Andrews principles: compound
bracket contours, torque-in-base and level slot
lineup. These design principles are interrelated
and fundamental to the requirements of any
Straight-Wire Appliance. And since all StraightWire Appliances share these principles, they are
fully interchangeable.
Compound Contour
Design mirrors both the mesiodistal and the
occlusogingival anatomy of the middle third of
every tooth’s clinical crown. This allows every
Straight-Wire Appliance to fit snugly on the tooth
for maximum efficiency. Compound contours
greatly enhance accurate bracket placement on
the center of the crown.
Level Slot Lineup
Is the end result of compound contours, torquein-base and accurate bracket placement. The
Straight-Wire Appliance is the only appliance
that assures you that the slot of the bracket will
always be parallel to the occlusal plane of the
arch.exceptionnels.
Is the key to uniformity of Straight-Wire bracket
placement, ensuring high levels of predictability
and accuracy in result. With every Straight-Wire
Appliance, the center of the slot and the center
of the base are always on the same plane for
consistent and easy bracket placement.
Fully Programmed SWA
Genuine Straight-Wire Appliance brackets are
fully programmed so that each tooth’s bracket
slot lines up horizontally with all others to
eliminate the need for time-consuming wire
bends.
Partially Programmed Appliance
Even when attempts are made to align the slots of
partially programmed brackets horizontally, the
bracket heights vary from anterior to posterior,
resulting in inconsistent and unpredictable torque
and in/out compensation.
Auxiliary Products
• Standard High-Retention Bands
• Micro-tubes / tubes “Peerless”
• Archwires “Tru-Arch” Form
26
Fig. 2 Competitor clips deform at just .5 pounds of force while
Prodigy SL withstands up to 10 pounds of force.
Precision Fit, Reliable Bond Strength
Who would have thought a bracket could overcome the
inherent limitations of active self-ligating appliances
by delivering new gains in efficiency, control and
predictable results? Now all that and more is possible
with Ormco’s all-new Prodigy active-passive self-ligating
bracket. Endorsed by FACE Tx, Prodigy SL is designed
for orthodontists by orthodontists for the simplest of
cases to the most complex. Prodigy SL’s patented design
combines the best of both worlds-active and passive-to
provide you with enormous flexibility while enabling
you to use your preferred treatment mechanics.
Choose a combination of active brackets in the anterior
for control while benefitting from passive mechanics in
the posterior. Or use the entire complement of active SL
brackets for all anterior and posterior teeth. Plus, Prodigy
SL’s innovative SpinTek™ slide is constructed of Copper
Ni-Ti™ for less wear, greater performance reliability and
delivery of continuous force. That means more predictable
results. With Prodigy SL, you’re in complete control.
Predictable Control, Continuous Force
• First active bracket constructed of a Copper Ni-Ti
slide that resists deformation, delivering more reliable
performance and greater rotational control compared
with Voudouris clip designs (Fig. 1 & 2)
• Constant force without deformation throughout
treatment enables consistent wire retention and
greater rotational control allowing for faster, more
predictable results
• Innovative bridge design coupled with Copper Ni-Ti
slide facilitates lighter forces during early treatment
and more rigid forces during finishing phases
• Patented laser-etched pad provides optimal bond
strength and reliability (Fig. 3)
• Fast, comfortable debonding experience for patients
when using the Prodigy SL Debonding Instrument.
Prodigy Brackers
Prodigy/SL Bracket
Active by Design,
Passive by Choice
Fig. 3 In vitro design verifi cation comparison testing shows
that Prodigy SL has greater tensile bond strength than other
self-ligating appliances.
Fast and Easy Wire Changes
• SpinTek slide design employs reciprocal forces during
opening – for a net force of 0 kg even with calcium
build-up – for fast, comfortable wire changes and
adjustments.
• Voudouris-designed self-ligating brackets require a
unidirectional force to open the slide, exerting up to
1.34 kg of pressure that can cause extreme patient
discomfort.
Predictable Control, Continuous Force
Users will immediately note advances as the opening/
closing slide mechanism slides gingivally (away from
the occlusion) allowing the orthodontist to view
the occlusion during archwire changes with no clip
interference and a cuspid pad bracket that actually fits
the cuspids!
27
Prodigy Brackers
Prodigy SL Bracket Specifications - Compatible with Nexus Clear™
Maxillary
Central
Slide
Torq.
Ang.
Rot.
P/N .022 L
P/N .022 R
Attive
+
12°
+5°
0°
339-4111
339-4110
Lateral
Attive
+8°
+9°
0°
339-4211
339-4210
Cuspid
Attive
-2°
+9°
0°
339-4311
339-4310
Cuspid – hook
Attive
-2°
+9°
0°
339-5311
339-5310
Cuspid
Passive
+7°
+5°
0°
491-6481
491-6480
1st-2nd Bicuspid
Attive
-7°
0°
0°
339-4511
339-4510
1st-2nd Bicuspid-hook
Attive
-7°
0°
0°
339-5511
339-5510
1st-2nd Bicuspid
Passive
-11°
+2°
0° 491-6491
Slide
Torq.
Ang.
Rot.
Central
Attive
-1°
+2°
Lateral
Attive
-1°
+2°
Mandibular
491-6490
P/N .022 L
P/N .022 R
0°
339-4011
339-4010
0°
339-4011
339-4010
Cuspid
Attive
-6°
+7°
0°
339-4415
339-4414
Cuspid – hook
Attive
-6°
+7°
0°
339-5415
339-5414
Cuspid
Passive
+7°
+5°
0°
491-6431
491-6430
1st Bicuspid
Attive
-17°
0°
0°
339-4611
339-4610
1st Bicuspid-hook
Attive
-17°
0°
0°
339-5611
339-5610
1st Bicuspid
Passive
-12°
+4°
0°
491-6441
491-6440
2nd Bicuspid
Attive
-22°
0°
0°
339-4711
339-4710
2nd Bicuspid-hook
Attive
-22°
0°
0°
339-5711
339-5710
2nd Bicuspid
Passive
-17°
+4°
0° 491-6451
Auxiliary Products
ID Dot
ID Dot
491-6450
Marketing Materials
Prodigy SL Double-Ended Opening Tool
866-4042
Prodigy SL Typodont 717-0090
Prodigy SL Debonding Instrument
866-4041
Nexus Clear & Prodigy SL Combo Typodont 717-0091
Prodigy SL Opening/Closing Instrument
866-4040
Prodigy SL Consultation Model 717-0095
Prodigy SL Doctor Brochure (English)
762-6200
Bendable Hooks for
treatment fl exibility
and maximum patient
comfort
Innovative “Bridge” for greater
wire retention and control
Vertical Slot
for treatment
versatility
SpinTek Slide for fast,
easy wire changes
Copper Ni-Ti memory
shape material for
increased durability
and continuous
rotational control
Tooth-shaped Pad for better
fi t especially on cuspids
Patented Laser-Etched Pad
for optimal bond
reliability and fit
Placement ID Markings in slot
for easy identifi cation
28
Pat en t ed L as er - Et c h ed Pad
provides optimal bond strength
and reliability
Passive Clip
Up to .016” x .022” or .018” x .018”
The Nexus bracket system allows you to use your
preferred treatment mechanics to determine
which stage of interactive self-ligation to
employthroughout treatment.
Nexus incorporates the benefits of self-ligation
while fully adapting to your preference of clip
activation–whether it be passive, active, fully
active or any combination thereof. Reach the end
result your way, with easy-to-use, meticulously
designed Nexus.
Active Clip
Larger than .016” x .022” or .018” x .018”
More Control, Less Friction
The contoured slot edges of Nexus are designed
with four contact points to minimize friction
while delivering greater control, resulting in fast,
efficient tooth movement.
Nexus Brackets
active self-ligation
Nexus Brackets
Fully Activated Clip
With .018” x .025” (.018” slot) or .022” x .025”
(.022” slot)
Excellent Clean-up
The contoured slot edges of Nexus are designed
with four contact points to minimize friction
while delivering greater control, resulting in fast,
efficient tooth movement.
Multiple Clip Openings
Facilitating fast wire changes and satisfying user
preference, the Nexus clip may be opened from
two different positions on the bracket. The clip is
easily closed using gently finger pressure.
• The facial indent on the clip of both Nexus
and Nexus Clear allows for occlusal opening.
(fig. 1)
• The gingival channel provides an additional
opening option. (fig. 2)
The Interactive Spectrum
The innovative Nexus clip is passive in the leveling
and aligning stages and active during the major
mechanics and finishing.
Fig.1
Fig.2
Auxiliary products & Marketing Material
• Standard High-Retention Bands
• Micro-tubes
• Archwires “Tru-Arch” Form
• Nexus Doctor Brochure (English)
762-6140
29
Nexus Clear Brackets
Nexus Clear Brackets
Fracture-Free Debonding
•
Translucent design naturally matches each
patient’s tooth shade for ultimate aesthetics
•
Inverse-formed hooks and beveled edges
provide superb mechanical retention and long
term bond strength
•
Specifically calibrated debonding tool for fast,
comfortable, splinter free removal
•
Contoured slot edges with a four contact-point
design delivers optimal archwire tolerance for
greater control and precision results
Maxillary
•
Patented Nexus Clear base encourages
adhesive to remain on the tooth during
removal, facilitating simple cleanup and
enamel preservation.
•
mbidextrous debonding tool form fits to the
A
bracket’s proximal surfaces.
•
pplying distal leverage pares the bracket
A
from the tooth, enabling fast, splinter-free
removal in 99.9% of cases.
•
Specially calibrated Nexus Clear debonding
tool allows brackets to be easily removed
without fracturing.
Torq. Ang. Rot.
.018 L
.018 R
.022 R
+12° +5° 0°
Lateral
+8° +9° 0°
436-3211436-3210
437-3211 437-3210
Cuspid – hook
-2° +11°
+4°
436-4311 436-4310
437-4311
437-4310
Bicuspid – hook
-7°
-2°
436-4511 436-4510
437-4511
437-4510
Mandibular
0°
Torq. Ang. Rot.
Central*
0° 0° 0°
436-3111436-3110
.022 L
Central
.018 L
.018 R
436-3611436-3610
437-3111 437-3110
.022 L
.022 R
437-3611 437-3610
Lateral* -11°+7°+2° 436-3711436-3710
437-3711 437-3710
Cuspid – hook* -11°
437-4711
+7°
+2°
436-4711 436-4710
437-4710
* :Available mid-2011
Nexus Clear Auxiliary and Marketing Products
30
Nexus Opening Instrument (metal & clear)
866-4030
Nexus Arch Director (metal & clear)
866-4031
Nexus Removing Plier (metal & clear)
866-4032
Nexus Clear Debonding Tool (clear)
866-4033
Nexus Clear Typodont
717-1060
Nexus Doctor Brochure (English)
762-6140
Nexus Clear Marking System
5 4
4 3
3 2
2 1
1
5
51 42 33 24 15
Available in Quad packaging, 10 ea.
Bond Reliability
•
Anatomically contoured base adheres to each
tooth shape for long-term bond reliability
•
ingival opening with precision-channel clip
G
release for quick and efficient wire changes.
•
Unique 4-rail system provides optimal sliding
and reduced friction/binding.
•
Funnel-edge design naturally guides excess
adhesive towards the incisal edge of the
bracket, reducing flash for easier clean-up.
Maxillary
The anatomically contoured base of Nexus
features patented hooked undercuts to provide
30% greater bond reliability than appliances with
mesh pads*. Compare the cross-section SEMs of
the Nexus bracket base and the leading active
SL mesh bracket base (purple color added to
adhesive for enhanced visibility).
Torq.Ang.Rot.
C53. M95. Y0. K0
.018 L
.018 R
.022 L
.022 R
Central
+12° +5° 0°
336-3111336-3110
337-3111 337-3110
Lateral
+8° +9° 0°
336-3211336-3210
337-3211 337-3210
Cuspid -2° +11°
+4°
336-3311 336-3310
337-3311
337-3310
Cuspid – hook
-2° +11°
+4°
336-4311 336-4310
337-4311
337-4310
Bicuspid -7°
0°
-2°
336-3511 336-3510
337-3511
337-3510
Bicuspid – hook
-7°
0°
-2°
336-4511 336-4510
337-4511
337-4510
.022L
.022 R
Mandibular
Torq. Ang. Rot.
Anteriors
0° 0° 0°
Cuspid
.018 L
.018 R
336-3611336-3610
-11°+7°+2° 336-3711336-3710
337-3611 337-3610
337-3711 337-3710
Cuspid – hook
-11°
+7°
+2°
336-4711 336-4710
337-4711
337-4710
1st Bicuspid
-17°
0°
-4°
336-3811 336-3810
337-3811
337-3810
1st Bicuspid – hook
-17°
0°
-4°
336-4811 336-4810
337-4811
337-4810
2nd Bicuspid -22°
0°
-4°
336-3911 336-3910
337-3911
337-3910
2nd Bicuspid – hook
-22°
0°
-4°
336-4911 336-4910
337-4911
337-4910
Nexus Metal Auxiliary and Marketing Material
Nexus Opening Instrument (metal & clear)
866-4030
Nexus Arch Director (metal & clear)
866-4031
Nexus Removing Plier (metal & clear)
866-4032
Nexus Typodont (metal)
717-1059
Nexus Doctor Brochure (English)
762-6140
Nexus Metal Brackets
Nexus Metal Brackets
Nexus Metal Marking System
5 4
4 3
3 2
2 1
1
5
51 42 33 24 15
5 4 3 2 1
51 42 33 24 15
31
Straight-Wire Synthesis
Straight-Wire Synthesis
Functionality with Aesthetics – Synthesis is specifically engineered to combine the rotational
control of the Straight-Wire™ appliance with
the aesthetics of the Mini-Twin™ in applicable
brackets..
Gingival
Mesial
Occlusal
Upper and lower bicuspid brackets
Traditional Straight-Wire Features
Compound Contour for Snug Fit – Each Synthesis
bracket is designed with tooth-specific contours
in the base. These contours mirror the anatomy of
the middle third of each tooth to ensure accurate
placement and snug fit.
Torque-in-Base for Accurate Placement – With the
Synthesis appliance, the center of the slot and the
center of the base are always on the same plane.
Torque-in-the-base ensures consistent, reliable
placement and makes level slot lineup possible.
Level Slot Lineup for Less Wire Bending – With
the Synthesis appliance, the slot of the bracket
will always be parallel to the occlusal plane of
the arch, eliminating timeconsuming wire bends.
Proven Enhancements
Optimesh® XRT for Improved Bond Retention
Optimesh XRT is a feature in all Synthesis
brackets. It’s a treated 100- gauge mesh that
creates additional undercuts and is proven to
increase bond strengths up to 35%.
Not Optimesh
• The same M-D dimension as TruStraight-Wire provides optimal rotational
control
• Increased O-G and gingivally offset brackets maximize bond retention
Occlusal
Mesial
Distal
Gingival
Lower anterior brackets
• The same M-D dimension as Mini-Twin
Rhomboid Design for Easier Placement – The
rhomboid bracket and pad design, incorporated throughout the Synthesis System, provides
numerous references for easier bracket
placement. The horizontal aspects align parallel
to the occlusal plane and the vertical aspects
align parallel to the crown-long axis of each
tooth. These visual cues make bracket placement
more precise.
32
Distal
Optimesh
• Easy to place on severely malposed teeth
Functionality with Aesthetics
Ang.
Rot.
.018 L
.018 R
.022 L
.022 R
Central
+7°+5°
0°
338-0121
338-0120
339-0121
339-0120
Central
+12°+5°
0°
338-0111
338-0110
339-0111
339-0110
Central
+17°+5°
0°
338-0141
338-0140
339-0141
339-0140
Lateral
+3°+9°
0°
338-0221
338-0220
339-0221
339-0220
Lateral
+8°+9°
0°
338-0211
338-0210
339-0211
339-0210
Lateral
+10°+9°
0°
338-0241
338-0240
339-0241
339-0240
Cuspid – hook
+3°
+9°
+4°
338-1341
338-1340
339-1341
339-1340
Cuspid – hook
-2°
+9°
+4°
338-1351
338-1350
339-1351
339-1350
339-0310
Cuspid
-2°+13°
+4°
338-0311
338-0310
339-0311
Cuspid – hook
-2°
+13°
+4°
338-1311
338-1310
339-1311
339-1310
Cuspid -7°
+11°
0°
338-0321
338-0320
339-0321
339-0320
Cuspid – hook
-7°
+11°
0°
338-1321
338-1320
339-1321
339-1320
Bicuspid G/O
-7°
0°
+2°
338-0511
338-0510
339-0511
339-0510
Bicuspid – hook G/O -7°
0°
+2°
338-1511
338-1510
339-1511
339-1510
Bicuspid
-7° 0°+2°
338-0531
338-0530
339-0531
339-0530
Bicuspid – hook
-7°
338-1531
338-1530
339-1531
339-1530
0°
+2° Bicuspid – hook M/G
-7°
0°
+2°
338-2531
338-2530
339-2531
339-2530
Bicuspid – hook G/O, M/G
-7°
0°
+2° 338-2511
338-2510
339-2511
339-2510
Bicuspid G/O
-7°
+2°
Bicuspid
-7°+2°
0°
338-0521
338-0520
339-0521
339-0520
0°
338-0541
338-0540
339-0541
339-0540
Bicuspid – hook
-7°
+2°
0°
338-2543
338-2542
339-2543
339- 2542
Bicuspid – hook G/O
-7°
+2°
0°
338-2523
338-2522
339-2523
339-2522
Bicuspid – hook M/G -7°
+2°
0°
338-2541
338-2540
339-2541
339-2540
Bicuspid – hook G/O, M/G
-7°
+2°
0° 338-2521
338-2520
339-2521
339-2520
Torq.
Ang.
Rot.
.018 L
.018 R
.022 L
.022 R
Mandibular
Anterior
-1°+2°
0°
338-0011
338-0010
339-0011
339-0010
Anterior
-6°+2°
0°
338-0021
338-0020
339-0021
339-0020
Cuspid
-11°+5°
0°
338-0421
338-0420
339-0421
339-0420
Cuspid – hook
-11°
+5°
0°
338-1421
338-1420
339-1421
339-1420
Cuspid -11°
+7°
2°
338-0411
338-0410
339-0411
339-0410
Cuspid – hook -11°
+7°
2°
338-1411
338-1410
339-1411
339-1410
1st Bicuspid G/O
-17°
-1°
4°
338-0611
338-0610
339-0611
339-0610
1st Bicuspid
-17°
-1°
4°
338-0631
338-0630
339-0631
339-0630
1st Bicuspid – hook G/O
-17°
-1°
4°
338-1611
338-1610
339-1611
339-1610
-17°
-1°
4°
338-1631
338-1630
339-1631
339-1630
1st Bicuspid G/O
-17°
+2°
0°
338-0621
338-0620
339-0621
339-0620
1st Bicuspid
-17°
+2°
0°
338-0641
338-0640
339-0641
339-0640
1st Bicuspid – hook G/O, M/G
-17°
+2°
0°
338-2621
338-2620
339-2621
339-2620
1st Bicuspid – hook M/G
-17°
+2°
0°
338-2641
338-2640
339-2641
339-2640
1st Bicuspid – hook D/G
-17°
+2°
0°
338-2643
338-2642
339-2643
339-2642
1st Bicuspid – hook G/O, D/G -17°
+2°
0°
338-2623
338-2622
339-2623
339-2622
2nd Bicuspid G/O
-22°
-1°
4°
338-0711
338-0710
339-0711
339-0710
2nd Bicuspid
-22°
-1°
4°
338-0731
338-0730
339-0731
339-0730
-22°
-1°
4°
338-1731
338-1730
339-1731
339-1730
2nd Bicuspid – hook G/O -22°
-1°
4°
338-1711
338-1710
339-1711
339-1710
2nd Bicuspid G/O
-22°
+2°
0°
338-0721
338-0720
339-0721
339-0720
2nd Bicuspid
-22°
+2°
0°
338-0741
338-0740
339-0741
339-0740
-22°
+2°
0°
338-2743
338-2742
339-2743
339-2742
2nd Bicuspid – hook G/O
-22°
+2°
0°
338-2723
338-2722
339-2723
339-2722
2nd Bicuspid – hook M/G
-22°
+2°
0°
338-2741
338-2740
339-2741
339-2740
2nd Bicuspid – hook G/O, M/G
-22°
+2°
0°
338-2721
338-2720
339-2721
339-2720
All hooks are distogingival unless otherwise noted..
*: b
rackets avec offset gingival (base décalée).
Synthesis Brackets
Torq.
Maxillairy
Marketing Material
Straight Wire Synthesis Brochure (English)
070-5425
33
Mini-Twin Brackets
Chapter Chapter 2 - Section 2
MINI-TWIN Brackets
The Mini-Twin brings a rhomboid design to a Straight-Wire
appliance system. Thirty percent smaller than a standard Twin,
the Mini-Twin is designed to give you the control you demand in an
appliance that is more esthetic and comfortable for your patients.
Bracket ID illustration represents the
Andrews prescription.
Maxillary
Torq.
Ang.
Rot.
Type
.018 L
.018 R
.022 L
.022 R
Central
+17°
+5°
0°
Twin
328-0141328-0140329-0141329-0140
Central
+12°
+5°
0°
Twin
328-0111328-0110329-0111329-0110
Central
+7°
+5°
0°
Twin
328-0121328-0120329-0121329-0120
Lateral
+3°
+9°
0°
Twin
328-0221328-0220329-0221329-0220
Lateral
+8°
+9°
0°
Twin
328-0211328-0210329-0211329-0210
Lateral
+10°
+9°
0°
Twin
328-0241328-0240329-0241329-0240
Lateral – hook
+3°
+9°
0°
Twin
328-1221
Cuspid
-7°
+11°
0°
Twin
328-0321328-0320329-0321329-0320
Cuspid
-2°
+9°
4°
Twin
329-0351329-0350
Cuspid
-2°
+13°
4°
Twin
329-0313329-0312
328-1220
Cuspid – hook
-7°
+11°
0°
Twin
328-1321
328-1320
329-1321
329-1320
Cuspid – hook
-2°
+9°
4°
Twin
328-1351
328-1350
329-1351
329-1350
Cuspid – hook
-2°
0°
4°
Twin
328-1317
328-1316
Cuspid – hook
-2°
+13°
4°
Twin, long radius
329-1311
329-1310
Cuspid – hook
-2°
+13°
4°
Twin
328-1313
328-1312
329-1313
329-1312
328-1331
328-1330
Cuspid – hook
0°
+6°
0°
Twin
Cuspid – hook
+3°
+9°
4°
Twin
Bicuspid
-7°
2°
Twin
0°
329-1331
329-1330
329-1341
329-1340
428-0511428-0510429-0511429-0510
Bicuspid
-7°
0°
0°
Twin
428-0521428-0520429-0521429-0520
Bicuspid
-7°
0°
0°
Twin, G/O
428-0571428-0570429-0571429-0570
Bicuspid
-7°
0°
2°
Twin, G/O
428-0575428-0574429-0575429-0574
Bicuspid – hook
-7°
0°
2°
Twin
428-1511
428-1510
429-1511
429-1510
Bicuspid – hook
-7°
0°
0°
Twin
428-1521
428-1520
429-1521
429-1520
428-1571
428-1570
Bicuspid – hook
-7°
0°
0°
Twin, G/O
429-1571
429-1570
Bicuspid – hook
-7°
0°
2°
Twin, G/O
429-1573
429-1572
Bicuspid – hook
-7°
0°
2°
Twin, M/G hook
429-2511
429-2510
Bicuspid – hook
-7°
0°
0°
Twin, M/G hook
All hooks are distogingival unless otherwise noted.
34
• M ini-Twin appliances feature Ultra-Lock high-retention
pads on both upper and lower bicuspids, providing
increased bonding surface and minimizing bond failure.
• The vertical scribe line aligns precisely with the crownlong axis, simplifying accurate bracket placement. As is
the case with all Straight-Wire Appliances, the archwire
slot of Mini-Twin appliances is engineered to align with
the horizontal axis of the tooth.
• M ini-Twins are available in Andrews and Roth* prescriptions, and are fully interchangeable with any other
Straight-Wire Appliance system. Options include hooks/
no hooks, gingival offsets on bicuspids, super torque on
upper anteriors and surgical sets.
• M ini-Twin Marking System Each Mini-Twin bracket has
a color ID system that is coordinated with the other
A+ mesh products. The color ID is on the distogingival
tie-wing, so that bracket identification is easy.
• F or added accuracy, the upper brackets have a cast dot
ID and all brackets have cast letters in the saddle of the
bracket identifying the tooth position.
428-2521
428-2520
.018 L
.018 R
.022 L
.022 R
Anterior
-1°
0°
0°
Twin
328-0021 328-0020 329-0021329-0020
Anterior – hook
-1°
0°
0°
Twin
328-1021
Cuspid
-11°
+5°
0°
Twin
328-0421 328-0420 329-0421329-0420
Cuspid
-11°
+7°
2°
Twin
329-0411329-0410
Cuspid – hook
-11°
+5°
0°
Twin
329-1421 329-1420
Cuspid – hook
-11°
+7°
2°
Twin
328-1411
328-1410
329-1411 329-1410
Cuspid – hook
0°
+5°
0°
Twin
328-1431
328-1430
329-1431 329-1430
328-1421
328-1020
328-1420
1st Bicuspid
-17°
0°
4°
Twin
428-0611
428-0610
429-0611 429-0610
1st Bicuspid
-17°
0°
0°
Twin
428-0621
428-0620
429-0621 429-0620
428-0671
428-0672
1st Bicuspid
-17°
0°
0°
Twin, G/O
1st Bicuspid
-17°
0°
4°
Twin, G/O
429-0671 429-0674
429-0673 429-0672
-17°
0°
4°
Twin
428-1611
428-1610
429-1611 429-1610
-17°
0°
0°
Twin
428-1621
428-1620
429-1621 429-1620
-17°
0°
0°
Twin, G/O
429-1671 429-1670
-17°
0°
4°
Twin, G/O
429-1673 429-1672
-17°
0°
4°
Twin, M/G hook
429-2611 429-2610
2nd Bicuspid
-22°
0°
4°
Twin
429-0711 429-0710
428-1673
428-0711
428-1672
428-0710
2nd Bicuspid
-22°
0°
0°
Twin
428-0721
428-0720
429-0721 429-0720
2nd Bicuspid
-22°
0°
4°
Twin, G/O
428-0771
428-0770
429-0771 429-0770
2nd Bicuspid
-22°
0°
0°
Twin, G/O
428-0773
428-0772
429-0773 429-0772
-22°
0°
4°
Twin
428-1711
428-1710
429-1711 429-1710
-22°
0°
0°
Twin
428-1721
428-1720
429-1721 429-1720
-22°
0°
0°
Twin, G/O
429-1771 429-1770
-22°
0°
4°
Twin, G/O
429-1773
-22°
0°
4°
Twin, M/G hook
429-1772
429-2711 429-2710
MINI-TWIN VS Brackets Vertical Slot
Maxillary
Torq.Ang. Rot.
Type
.018 L
Central
+12°
Lateral
Cuspid
.018 R
.022 L
.022 R
+5°
0°
Twin
318-0111
318-0110
319-0111
319-0110
+8°
+9°
0°
Twin
318-0211
318-0210
319-0211
319-0210
-2°
+13°
4°
Twin
319-0311
319-0310
Cuspid – hook
-2°
+13°
4°
Twin
318-1311
318-1310
319-1311
319-1310
Cuspid – hook
-2°
+9°
4°
Twin, large radius
318-1351
318-1350
Bicuspid
-7°
0°
2°
Twin
492-0511
492-0510
493-0511
493-0510
Bicuspid – hook
-7°
0°
2°
Twin
493-1511
493-1510
Mandibular
Torq.Ang. Rot.
Type
.018 L
.018 R
.022 L
.022 R
318-0021
318-0020
319-0021
319-0020
319-0411
319-0410
319-1411
319-1410
493-0611
493-0610
493-1611
493-1610
493-0711
493-0710
493-1711
493-1710
Anterior
-1°
0°
0°
Twin
Cuspid
-11°
+7°
2°
Twin
Cuspid – hook
-11°
+7°
2°
Twin
1st Bicuspid
-17°
-1°
4°
Twin
-17°
-1°
4°
Twin
2nd Bicuspid
-22°
-1°
4°
Twin
-22°
-1°
4°
Twin
318-1411
492-1611
492-1711
318-1410
492-1610
492-1710
Mini-Twin VS Brackets
Torq.Ang.Rot.Type
Mandibular
35
Buccal Tubes and Archwires
Buccal Tubes and Archwires
Micro Bondable Buccal Tubes
Maxillary
Rot. Distale
Ang.
.022 G
.022 D
-14°
14°
0°
438-0174
438-0074
2nd Molar Simple DB MT HK
-14°
14°
0°
438-0185
438-0085
Mandibular
Torq.
Rot. Distale
Ang.
.022 G
.022 D
1st Molar Double UDBT DB MT HK No HG Tube
Torq.
1st Molar Double UDBT DB MT HK
-30°
4°
-1°
438-0119
438-0019
2nd Molar Simple DB MT HK
-30°
4°
-1°
438-0131
438-0031
Micro Weldable Buccal Tubes
Maxillary
Torq.
Rot. Distale
Ang.
.022 G
.022 D
!st Molar Triple (TBT RMT)
-14°
14°
0°
137-0143
138-0143
2nd Molar Simple (RMT)
-14°
14°
0°
137-0181
138-0181
Mandibular
Torq.
Rot. Distale
Ang.
.022 G
.022 D
-30°
4°
-1°
137-0249
138-0249
1st Molar Double (RMT Bal)
-30°
4°
-1°
137-0251
138-0251
2nd Molar Simple (RMT)
-30°
4°
-1°
137-0285
138-0285
1st Molar Double (DBT RMT)
Archwire
Special Archwire
Tru-Arch Cu Ni-Ti 27° no encoche médiane .014
.018
Tru-Arch SS DKHL
Maxillary
small
205-6201
205-6203
Tru-Arch SS DKHL -22mm
227-5025
Maxillary
large
205-6401
205-6403
227-5027
Mandibular
small
205-6101
205-6103
227-5029
Mandibular
large
227-5031
227-5033
227-5035
227-5037
227-5039
227-5041
227-5043
205-6301
Tru-Arch Cu Ni-Ti 40° no encoche médiane
Maxillary
Small
Maxillary
Large
Mandibular
Small
Mandibular
Large
Tru-Arch Cu Ni-Ti 35° no encoche médiane
205-0303
.019x.025
.020x.020
210-9112
Maxillary
Small
Maxillary
Large
210-9212
Mandibular
Small
211-9112
Mandibular
Large
211-9212
Tru-Arch Acier
.0.19x.0.25
.021x.025
.019x.025
227-5045
227-5047
.019x.025
Ni-Ti Super -Torque
Ni-Ti Super-Torque -34mm
227-0343
Ni-Ti Super-Torque -38mm
227-0383
TMA .017x.025
.019x.025
TMA Low-Friction
227-1112
227-1113
Maxillary
Small
227-9050
227-9052
Maxillary
Medium
227-9034
227-9036
Mandibular
Small
227-9016
227-9018
Instruments/Typodont
Mandibular
Medium
227-9006
227-9008
Nexus Opening Instrument
866-4030
Arch director
866-4031
Nexus Typodont
717-1059
Nexus Clear Typodont
717-1060
Quad Box II
070-0674
Mod Bracket Set-Up Tray
36
740-0297
Orthos System
Section 3
Orthos System
37
TM
The Titanium
Coordinated System - Titanium Orthos combines the most precise
bracket and wire system with the proven material benefits of titanium
for the finest
Comparing Loading/Unloading
Stainless Steel
Brackets
Load (g)
Titanium Orthos Brackets
Titanium Orthos Brackets
titanium Orthos
The OrthosTM System
This fully-integrated orthodontic device system has been designed to
produce an optimum centred occlusion and better clinical efficacy.
The Orthos system of brackets, arcs and coordinated vestibular tubes is
the fruit of numerous anatomical analyses carried out over a period of 5
years by the Ormco R&D department. It presents torque and thickness
values that have been optimised to obtain the best clinical results with a
minimum of arc adjustments.
Bios Titane
TM
This corresponds with the Bios Orthos prescription, adapted to a light
force prescription with the torque focussed on the maxillary incisors
and on the posterior mandibular segments, relative to the Orthos system.
It also differs by the radicular lingual torque for the maxillary and
mandibular canines. The Bios system enables early control of the torque
with lighter arcs.
Orthos
Non Orthos
Deflection (in mm)
Stored Energy
The body of the Titanium Orthos bracket is designed to flex when
activated with an archwire and to store up to 40% of the initial load.
With Titanium Orthos, clinicians enjoy more gentle forces, for greater
patient comfort.
Similar to titanium alloy archwires, titanium provides a far more
predictable return and precise expression at unloading over an
extended period of time. Less force and longer treatment intervals
translate to shorter treatment time and greater efficiency for your
practice. Titanium Orthos has been shown to reduce treatment time
by eliminating two to three finishing appointments.
Tooth-specific pad shapes and contours make Titanium Orthos
brackets amazingly easy to place for more accurate finishing and
reduced midtreatment repositioning. Titanium’s chemical affinity
to adhesives and superior shock absorbency deliver unmatched
bond retention. In-office studies have demonstrated significant
reduction in bond failures. With Titanium Orthos, you simply fit and
forget until the end of treatment, providing greater clinical and
practice efficiency.
• Tooth-shaped pads on every bracket for easy and
consistent placement
• Unmatched bond retention – up to 85% fewer bond failures
Compensation In Slot (CIS)
The advantages of titanium and a new
design, serving the Orthos accuracy:
Compensation is cut into the slot of the lower cuspid brackets
and the shape of the archwire is adjusted to sweep as close to
the tooth surface as is practical. This allows a dramatic reduction
in the profile of the lower anterior brackets. The Compensation In
Slot (CIS) geometry does not “rotate” the tooth. The CIS geometry
does, in conjunction with the archwires, compensate for 1st order
discrepancies.
• A material with many properties
• A tooth-shaped base (T.S.P.)
• A significant reduction in braces becoming unstuck
Long axis
Orthos
Non Orthos
Tooth shaped base (TPS)
Placement heights
Maxillaire Mandibular
Orthos
38
Non Orthos
Central
Lateral
Cuspid
1st Molar
2nd Molar
4.4 mm
3.8 mm
4.4 mm
4.1 mm
3.6 mm
3.9 mm
3.9 mm
4.6 mm
3.9 mm
3.9 mm
.018 L
.018 R
.022 L
.022 R
448-6111
448-6110
449-6111
449-6110
Lateral
+9° +9°-4.5°
448-6211
448-6210
449-6211
449-6210
Lateral – hook
+9°
448-9211
448-9210
449-9211
449-9210
+9°
Rot*
-4.5°
Cuspid
-3°+10°
0°
448-6311
448-6310
449-6311
449-6310
Cuspidl – hook
-3°
0°
448-7311
448-7310
449-7311
449-7310
1st Bicuspid**
-6°0°0° 448-6411
448-6410
449-6411
449-6410
1st Bicuspid – hook**
-6°
0°
0°
448-6413
448-6412
449-6413
449-6412
2nd Bicuspid**
-8°
+4°
0°
448-6511
448-6510
449-6511
449-6510
2nd Bicuspid – hook**
-8°
+4°
0°
448-6513
448-6512
449-6513
449-6512
Mandibular
+10°
.018 L
.018 R
.022 L
.022 R
Central
Torq. Ang.
-5°+2° 0°
Rot*
448-6615
448-6610
449-6615
449-6610
Lateral
-5° +4°-4.5°
448-6625
448-6620
449-6625
449-6620
Cuspid
-6° +6°-4.5°
448-6711
448-6710
449-6711
449-6710
Cuspidl – hook
-6°
+6°
-4.5°
448-7711
448-7710
449-7711
449-7710
1st Bicuspid **
-7°
+3°
0°
448-6813
448-6812
449-6813
449-6812
1st Bicuspid – hook **
-7°
+3°
0°
448-6815
448-6814
449-6815
449-6814
2nd Bicuspid **
-9°
+3°
0°
448-6911
448-6910
449-6911
449-6910
2nd Bicuspid – hook **
-9°
+3°
0°
448-6913
448-6912
449-6913
449-6912
.018
.022
5 - 5 maxillary and mandibular
Single-Patient Kits
740-1278
740-1279
7 - 7 maxillary and mandibular
740-1280740-1281
Maxillary
Torq.
Ang. Rot*
.018 L
.018 R
.022 L
.022 R
Central +22°
+5°
448-8119
448-8118
449-8119
449-8118
Lateral
+14°+9°-4,5° 448-8219
448-8218
449-8219
449-8218
Lateral
+14°+9° 0°
448-8217
448-8216
449-8217
449-8216
Cuspid
+7° +10°0°
448-8319
448-8318
Cuspidl – hook ***
+7°
+10°
0°
448-9319
448-9318
449-9319
449-9318
1st Bicuspid **
-6°
0°
0°
448-6411
448-6410
449-6411
449-6410
-6°
0°
0°
448-6413
448-6412
449-6413
449-6412
2nd Bicuspid **
-8°
+4°
0°
448-6511
448-6510
449-6511
449-6510
-8°
+4°
0°
448-6513
448-6512
449-6513
449-6512
Mandibular
Torq.
Ang. Rot*
.018 L
.018 R
.022 L
.022R
Central -5°
+2°
448-6615
448-6610
449-6615
449-6610
Central
-10°+2° 0° 448-8617
448-8612
449-8617
449-8612
Lateral
-5° +4°0° 448-8629
448-8624
449-8629
449-8624
Lateral
-10°+4° 0° 448-8627
448-8622
449-8627
449-8622
Cuspid
+7° +6°-4,5° 448-8719
448-8718
Cuspid – hook ***
+7°
+6°
-4,5°
448-9719
448-9718
449-9721
449-9720
1st Bicuspid **
-7°
+3°
0°
448-6813
448-6812
449-6813
449-6812
-7°
+3°
0°
448-6815
448-6814
449-6815
449-6814
2nd Bicuspid **
-17°
+3°
0°
448-8917
448-8916
-17°
+3°
0°
448-9917
448-9916
0°
0°
Titanium Bios Orthos Brackets
Torq. Ang.
+15°+5° 0°
Maxillary
Central
* : compensation in slot.
** : gingivally offset (offset base).
*** : m
esio-gingival hook
All hooks are disto-gingival unless other notification.
Available in Quad Stick packaging
39
Metal Orthos Brackets
Metal Orthos Brackets
TM
Maxillary
Torq. Ang. CIS**
Central
+15°
Lateral
+9°
+5°
M/D* Epais.*
.018 L
.018 R
.022 L
.022 R
0°
3.4
0.5
454 0111
454 0110
455 0111
455 0110
+9° -4.5°
2.7
0.8
454 0211
454 0210
455 0211
455 0210
Cuspid
-3° +10°
0°
3.2
0.3
454 0311
454 0310
455 0311
455 0310
Cuspid – hook
-3° +10°
0°
3.2
0.3
454 1311
454 1310
455 1311
455 1310
1st Bicuspid
-6°
0°
0°
3.2
0.5
454 0413
454 0412
455 0413
455 0412
-6°
0°
0°
3.2
0.5
454 1413
454 1412
455 1413
455 1412
1st Bicuspid ***
-6°
0°
0°
3.2
0.5
454 0411
454 0410
455 0411
455 0410
1st Bicuspid – hook***
-6°
0°
0°
3.2
0.5
454 1411
454 1410
455 1411
455 1410
2nd Bicuspid
-8°
+4°
0°
3.2
0.6
454 0513
454 0512
455 0513
455 0512
-8°
+4°
0°
3.2
0.6
454 1513
454 1512
455 1513
455 1512
2nd Bicuspid ***
-8°
+4°
0°
3.2
0.6
454 0511
454 0510
455 0511
455 0510
2nd Bicuspid – hook***
-8° +4°
0°
3.2
0.6
454 1511
454 1510
455 1511
455 1510
.018 L
.018 R
.022 L
.022 R
Mandibular
Torq. Ang. CIS**
M/D* Epais.*
Central
-10°
+2°
0°
2.4
0.5
454 0617
454 0612
455 0617
455 0612
Central
-5°
+2°
0°
2.4
0.5
454 0615
454 0610
455 0615
455 0610
Lateral
-10°
+4°
0°
2.4
0.5
454 0627
454 0622
455 0627
455 0622
Lateral
-5°
+4°
0°
2.4
0.5
454 0625
454 0620
455 0625
455 0620
Lateral
-5°
+4°
-4.5°
2.4
0.5
454 0635
454 0630
455 0635
455 0630
Cuspid
-6°
+6°
-4.5°
3.2
0.5
454 0711
454 0710
455 0711
455 0710
Cuspid – hook
-6°
+6°
-4.5°
3.2
0.5
454 1711
454 1710
455 1711
455 1710
1st Bicuspid
-7°
+3°
0°
3.2
0.5
454 0815
454 0814
455 0815
455 0814
-7°
+3°
0°
3.2
0.5
454 1815
454 1814
455 1815
455 1814
11st Bicuspid ***
-7°
+3°
0°
3.2
0.5
454 0813
454 0812
455 0813
455 0812
1st Bicuspid – hook ***
-7°
+3°
0°
3.2
0.5
454 1813
454 1812
455 1813
455 1812
2nd Bicuspid
-9°
+3°
0°
3.2
0.6
454 0913
454 0912
455 0913
455 0912
-9°
+3°
0°
3.2
0.6
454 1913
454 1912
455 1913
455 1912
2nd Bicuspid ***
-9°
+3°
0°
3.2
0.6
454 0911
454 0910
455 0911
455 0910
2nd Bicuspid – hook ***
-9°
+3°
0°
3.2
0.6
454 1911
454 1910
455 1911
455 1910
Single-Patient Kits
.018 .022
5 - 5 maxillary and mandibular Cuspid – hook
740 1246
740 1247
Prescription T.G.O.
Maxillary
Torq. Ang.
M/D* Epais.*
.020 x .028 G
.020 x .028 D
Central
+15°
+5°
3.4
0.5
454 6111
455 6111
Lateral
+9°
+9°
2.7
0.8
454 6211
455 6211
Each bracket is color-coded for its quadrant.
*
: in mm (mesio/distal & thickness).
** : c ompensation in slot.
*** : g
ingivally offset brackets (offset
base).
All hooks are disto-gingival unless other
notification
40
B
D
A
E
F
C
A/ P a d S i z e – T h e l a r g e s t p a d s i z e a v a i l a b l e p r o v i d e s
improved bond strength and a better fit to the tooth.
B/ T e a r d r o p D e s i g n – B u c c a l t u b e s o n t h e l o w e r a r c h
feature a teardrop design to keep them out of occlusion.
There are also no tie-wings to create food traps and
inhibit patient comfort.
C/ C omfortable Hook Design – The Ormco hook design
tilts away from the gingiva to avoid impingement and
enhance patient comfort.
The Material
As resistant as steel and possessing an equivalent friction
index, titanium is twice as resilient.
Titanium isolates the adhesive layer and the tooth from
impact forces, thus providing greater bonding reliability
and increased patient comfort.
Titanium is also known for its biocompatibility and wettability.
D/ Handling Notch – A unique notch on the occlusal side
makes holding the Titanium buccal tube a cinch and
helps with initial placement on the tooth.
E/ I n-Face Funneled Slot Opening – A patented funneled
slot opening makes archwire engagement easy without
added size.
F/ I . D . S y s t e m – T h e I . D . d o t i s c o m p a t i b l e w i t h t h e
legendary Orthos system.
Maxillary
Torq. Ang. Rot.
Orthos First Molar
-10°
0°
+10°448-1201448-0201449-1201449-0201
.018 L
.018 R
.022 L
Orthos
First Molar
-10°
0°
+15°448-2116448-2016449-2116449-2016
Orthos TItanium Buccal Tubes
The Tube
Orthos Titanium Buccal Tubes
.022 R
Orthos Second Molar -10°
0°
+6°448-1202448-0202449-1202449-0202
Orthos
Second Molar -10°
0°
+15°448-2117448-2017449-2117449-2017
Mandibular
Torq. Ang. Rot.
.018 L
.018 R
.022 L
.022 R
Orthos First Molar
-22°
0°
0°448-1204448-0204449-1204449-0204
Orthos
First Molar -22°
0°
+5°448-1206448-0206449-1206449-0206
Orthos First Molar -10°
0°
0°448-2126448-2026449-2126449-2026
Orthos
Second Molar -22°
0°
+5°448-1205448-0205449-1205449-0205
Orthos
Second Molar -10°
0°
+5°448-2127448-2027449-2127449-2027
41
The Accent Tubes have been adapted to the use of flexible
and highly resilient arcs, and to mechanisms with variable
elasticity modules.
The tube
Not being convertible they do not have any plot and offer
an extremely accented conical mesial opening overture
which aids with the insertion of the arcs.
The Accent tubes are available in.018x.025 and .022x.028,
basic or double, with and without distal extension.
They have benefited from the latest progress made in
casting techniques, characterised by irreproachable
surface condition and finishing.
The mesial hooks are an integral part of the tube.
- Much smaller profile
- Elimination of the risks of occlusal interference with the
teeth or the antagonistic tubes.
- Significant improvement of patient comfort.
Orthos Accent Buccal Tubes
Orthos Accent Buccal Tubes
Double Bondable
Simple Bondable
Maxillaire
Torq.Rot. Distale
.018 L
.018 R
.022 L
.022 R
Accent 1sr Molar Doble
-10°15°
340 1240
340 0240
342 1239
342 0239
Accent 1st Molar Simple
-10°15°
340 5116
340 4116
342 5115
342 5115
Accent 2nd Molar Simple -10° 5°
340 5112
340 4112
342 5111
342 4111
Accent 2nd Molar Simple* -10°15°
340 5216
340 4216
342 5215
342 4215
Accent 2nd Molar Simple*
-10° 5°
340 5212
340 4212
342 5211
342 4211
Mandibulaire
Torq.Rot. Distale
.018 L
.018 R
.022 L
.022 R
Accent 1st Molar Doble
-10° 0°
340 1236
340 0236
342 1241
342 0241
Accent 1st Molar Simple -10°
0
°
340 5118
340 4118
342 5117
342 4117
Accent 2nd Molar Simple* -10°
5
°
340 4214
340 5214
342 4213
342 5213
Accent 2nd Molar Simple
-10° 5°
340 4114
340 5114
342 4113
342 5113
* D
Istal extension
42
TM
The Orthos* archwire shape is unique because it was
derived from the skeletal and dental anatomy of typical
orthodontic cases.
Upper – Large
Orthos archwires combine a comprehensive selection of
various modulus alloys with a fully integrated arch form
designed to synchronize with Orthos brackets and buccal
tubes. Through Computer Aided Engineering (CAE), both
mandibular and maxillary arch forms are coordinated
to the complete seven-toseven Orthos system. Orthos,
Orthos AP and Bios are designed to coordinate with the
Upper – Small
same Orthos arch form.
• All wires are packaged in Kleen Paks™of 10
unless otherwise noted.
Copper Ni-Ti Archwires
Copper Ni-Ti 27°
Upper Small
219-0204
Upper Large
219-0404
Lower Small
219-0104
Lower Large
219-0304
Lower – Large
Copper Ni-Ti 27° Upper Small
hook219-7210
Upper Large
Lower Small
Lower Large
hook 219-7226
hook 219-7202
hook
219-7218
Copper Ni-Ti 40° .016 x .022
Upper Small
.017 x .025
.019 x .025
Lower – Small
.021 x .025
219-5208219-5210 219-5212 219-5213
Upper Large
219-5408
219-5410
219-5412
219-5413
Lower Small
219-5108
219-5110
219-5112
219-5113
Lower Large
219-5308
219-5310
219-5312
219-5313
Copper Ni-Ti 35°
.016
.018
.017 x .017
.020 x .020
Upper Small
219-4203
219-4204
219-4209
219-4211
.016 x .022
.017 x .025
.019 x .025
.021 x .025
219-4208
219-4210
219-4212
219-4213
Upper Large
219-4403
219-4404
219-4409
219-4411
219-4408
219-4410
219-4412
219-4413
Lower Small
219-4103
219-4104
219-4109
219-4111
219-4108
219-4110
219-4112
219-4113
Lower Large
219-4303
219-4304
219-4309
219-4311
219-4308
219-4310
219-4312
219-4313
Copper Ni-Ti 35° Dimple
Upper Small
Orthos Arch Form Archwires
.016 x .022 .019 x .025
219-7311
219-7315
Upper Large
219-7327
219-7331
Lower Small
219-7303
219-7307
Lower Large
219-7319
219-7323
43
44
OrthosTM Arch Form Archwires (cont.)
Copper Ni-Ti Archwires
.016
.018
Upper Small 219-3203
219-3204
219-3208
219-3210
219-3212
Upper Large 219-3403
219-3404
219-3408
219-3410
219-3412
Lower Small 219-3103
219-3104
219-3108
219-3110
219-3112
Lower Large 219-3303
219-3304
219-3308
219-3310
219-3312
Turbo Ni-Ti Archwires
TM
.020
.0175 x .0175
.016 x .022
.017 x .025
.018 x .025
.019 x .025
Arch NTA (titanium niobium)
.016 x .022
.017 x .025
.019 x .025 .021 x .025
.017 x .025
219-8210
219-8212
Upper Large
219-6410
Upper Large 219-8408
219-8410
219-8412
Lower Small
219-6110
Lower Small 219-8108
219-8110
219-8112
Lower Large
219-6310
Lower Large
219-8310
219-8312
219-8213
219-8113
TMA Archwires
®
.016 x .022 .017 x .025
.019 x .025 .021 x .025
219-2210
219-2212
219-2213
Upper Large
219-2408
219-2410
219-2412
219-2413
Lower Small
219-2108
219-2110
219-2112
219-2113
Lower Large
219-2308
219-2310
219-2312
219-2313
.016 x .022
.017 x .025
.018 x .025
Stainless Steel Archwires
Rectangular
.019 x .025 .021 x .025
Upper Small
219-1208
219-1210
219-1211
219-1212
219-1213
Upper Large
219-1408
219-1410
219-1411
219-1412
219-1413
Lower Small
219-1108
219-1110
219-1111
219-1112
219-1113
Lower Large
219-1308
219-1310
219-1311
219-1312
219-1313
Round
.016
.018
.020
Upper Small
219-1570
219-1571
219-1572
Upper Large
219-1590
219-1591
219-1592
Lower Small
219-1560
219-1561
219-1562
Lower Large
219-1580
219-1581
219-1582
STB Lingual System
Section 4
STB Lingual
System
45
STB Lingual System
STB Lingual System
STb
TM
Designed for maximum treatment efficiency and patient
comfort, the STb Straightwire and Bicuspid brackets
accommodate varying patient anatomy to facilitate ideal
archform development and occlusion.
STb Straightwire Bicuspid brackets have been specifically
engineered to accommodate the STb Straightwire. These
brackets feature a lower profile than the original STb
Bicuspid brackets and are available with and without a
hook.
STb
TM
Light Lingual System
Note: STB brackets slots are .018
The light-force mechanics of the STb Light Lingual System
are designed to decrease the stress of tooth movement,
making treatment far gentler. In most cases, a full TARG
or CLASS setup is not required, simplifying and reducing
c o sts typica lly a ssociated with lingual cases. In d i r ec t
bonding application can be fabricated in your own practice
or by AOA laboratory.
Utilizing passive ligation, STb Light Lingual dramatically
reduces friction and forces allowing teeth to move freely
with exceptional efficiency. It’s lingual like you’ve never
seen it before.
• Low-force, low-friction mechanics for faster, gentler tooth
The low profile and smooth contours of the STb bracket reduce
discomfort and speech impairment.
movement
• Maximum patient comfort with minimal impact on speech
• Predictable high-quality results
• Eliminates compliance issues and misplaced aligners
• Low bracket profile at 1.5mm and rounded design
provides maximum comfort
• Most cases without TARG or CLASS set-up
Comfort
STb brackets are designed to provide maximum
patient comfort making treatment far more gentle to the
tissues. STb has minimal impact on tongue position and
speech.
• Reduced dimension
• The lowest bracket profile
• Maximum patient comfort
• Maintains oral hygiene
• No impact on speech
Speed
The STb System utilizes a new passive ligation
design that dramatically reduces friction. Low friction and
light forces have been shown to move teeth with exceptional effi ciency.
Simplicity Reduced appointments and shorter treatment
time. Minimal disruption to your daily life.
Quality
Predictable high quality results in the shortest
time possible.
STb
TM
Social 6
The most aesthetic option available within the STb family,
STb Social 6 is aimed towards patients motivated to
correct minor to moderate crowding or spacing issues
affecting anterior teeth.
• Completes most cases in six weeks to four months
• Simple two-wire sequence quickly unravels and aligns teeth
• No custom wire shaping and no need for composit buttons.
46
The position of the STb bracket is more incisal.
With the archwire closer to the tooth, first order bends are reduced.
Ang.
D/O
+55˚
+55˚
+40˚
+40˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚ STB Lingual System
Torq.
Part Numbers
369-2102
369-3102
369-2110
369-3110
Bicuspids Torq.
Ang.
D/O
Upper/Lower 4 &5 Universal
Upper/Lower 4 &5 Universal, hook
+11˚
+11˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚ Part Numbers
Molars Torq.
Ang.
D/O
Part Numbers
Upper 6R, hook
Upper 6L, hook
Upper 7R, hook
Upper 7L, hook
Lower 6R, hook
Lower 6L, hook
Lower 7R, hook
Lower 7L, hook
+10˚
+10˚ +10˚ +10˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ 0˚ +5˚ +5˚ +5˚ +5˚ 0˚ 0˚ 0˚ 0˚ 369-3600
369-3601
369-3700
369-3701
369-3610
369-3611
369-3710
369-3711
369-2400
369-3400
369-2401
369-3401
Single-Patient Kits
Part Numbers
Extraction Upper & Lower 7-7
Upper & Lower 7-7
Upper Only 7-7
Upper Only 7-7
Upper 3-3 Only* Upper & Lower 3-3* 740-0411
740-0412
740-0414
740-0415
740-0416
740-0417
STb Straight-Wire
*Parts for STb Social 6 cases
Anteriors
Upper 3 - 3 Universal*
Upper 3 - 3 Universal, hook*
Lower 3 – 3 Universal*
Lower 3 – 3 Universal, hook*
TM
Bicuspids
Torq.
Ang.
D/O
+11˚
+11˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚ Part Numbers
369-2402
369-3402
369-3403
369-2403
Single-Patient Kits
Part Numbers
Extraction Upper & Lower 7-7
Upper & Lower 7-7
Upper Only 7-7
Extraction Upper Only 7-7
740-0421
740-0422
740-0424
740-0425
STb Marking System
5 4 3 2 1
5 4 3 2 1
1 4
2 3 2
4 1
5
5
5
1 4
2 3 2
4 1
5
Upper* Central
Lateral
Cuspid
High Torque**
Red
Red
Red
Low Torque**
Green
Green
Lower* Central
Lateral
Cuspid High Torque**
Low Torque**
Red
Green
Green *ID dots are distogingival on all brackets, including high and low torques.
**ID dots are located on center of slide.
Marketing Materials
STB Doctor Brochure (English)
STB Counter Display
070-5345
762-6041
STB Patient Brochure (English) 762-6051t
STB Quick Start Guide (English)
762-6056
STB Social 6 Counter Display
070-5495
STB Social 6 Patient Brochure (English)
070-5425
47
Lingual Archwires
Lingual Arch Form
• Packs of 10 Lingual Arch Form
Ni-Ti
Upper
Upper
Upper
Size 1
Size 2
Size 3
Lower
Lower
Lower
Size 1
Size 2
Size 3
Taille.016
Maxillary
.018
Copper Ni-Ti
Taille
.017 x .017
.017 x .025
1
205 0025
205 0026
1
205 0076
205 0086
2
205 0023
205 0024
Maxillary
2
205 0075
205 0085
3
205 0021
205 0022
3
205 0074
205 0084
1
205 0031
205 0032
1
205 0079
205 0089
Mandibular
Mandibular
2
205 0029
205 0030
3
205 0027
205 0028
2
205 0078
205 0088
3
205 0077
205 0087
Lingual Archwire Standard / round, square and rectangular wires
Standard.012
.014
.0155
.016
.0175
.018
Respond203 0006203 0007
TMA202 0025
Acier206 0000206 0001206 0002
Ni-Ti GH0 209 0012 GH0 209 0014
Standard
.016 x .016 .0175 x .0175 .016 x .022
.017 x .025
.018 x .025
D-Rect201 0023
TMA202 0018202 0020
Acier
206 0005
206 0006
206 0007
206 0009
Standard Form
Lingual Archwire STb Straight-Wire
Copper Ni-Ti
48
.013
.016
.016 x .016 .018 x .018
Small
204-2101204-2111204-2121204-2141
Medium
204-2102204-2112204-2122204-2142
Large 204-2103
Lenght
266-1360
TMA
.0175 x .0175
204-2113
Acier
204-2123
204-2143
.018 x .018
Small
204-2211
Petit
204-2301
Medium
204-2212
Moyen
204-2302
Large
204-2213
Grand
204-2303
Straight-Wire Form
Appliances
Chapter 3 Aesthetic
Chapter 3
Aesthetic
Appliances
49
ICE Brackets (Aesthetic Appliances)
Chapter 3 - Section 1 Inspire
Inspire ICE Brackets
Excellent sliding mechanics – without a metal slot
Inspire ICE™ has an ultra-smooth, heat-polished surface
that dramatically reduces friction over any polycrystalline-slotted bracket. In fact, laboratory tests prove the
frictional resistance of Inspire ICE™ to be better than
ceramic brackets with a metal-slot insert.
Maximum tie-wing strength
Advances in heat-treatment technology allow us to produce
brackets that are twice as resistant to breakage than other ceramic
appliances. Torque strength is nearly three times that of other
ceramic brackets such as Clarity
Smooth and comfortable
Inspire ICETM has all the features I value in my metal brackets.
Plus, it’s the only completely clear appliance available.
Crystal clear
Unlike ceramic brackets that are opaque and colored to
mimic a particular tooth shade, Inspire ICE™ brackets are
crystal clear and virtually disappear regardless of tooth
shade. Inspire ICE™ is the only true aesthetic solution for
ALL patients. That’s why 96% of patients surveyed chose
Inspire ICE™ over other ceramic bracket.
Inspire ICE™ is the lowest profile ceramic bracket on
the market and is manufactured with an innovative
boron tumbling process that provides a smooth surface
and rounded facial contours to greatly enhance patient
comfort.
Fast, accurate placement
Ormco’s rhomboid shape, tooth-specific pad contours
and unique Face Paint™ system for bracket-to-tooth
contrast provide fast, accurate bracket placement. New
lowerbicuspid brackets offer patients a complete 20-unit
aesthetic option.
Easy to debond
Inspire ICE™ utilizes Ormco’s patented ball-base design,
which reduces the force required to debond. A simplified
debonding procedure ensures that brackets come off
easily and consistently. Simply engage the Inspire ICE™
debonding instrument under the tie-wing area and pivot
the instrument toward the occlusal/incisal edge.
Inspire ICE™ brackets are packaged in
QUAD™ sticks, part of Ormco’s revolutionary new QUAD System. QUAD
not only organizes your inventory
but also makes case setup easier and
more efficient.
50
Torq.
Ang.
Rot.
.018 L
.018 R
.022 L
.022 R
Central
+12°
+5°
0°443-0111443-0110444-0111444-0110
Lateral
+8°
+9°
0°443-0211443-0210444-0211444-0210
Cuspid
-2°
+13°
4°443-0311443-0310444-0311444-0310
Cuspid – hook
-2°
+13°
4°443-1311443-1310444-1311444-1310
Bicuspid
-7°
0°
2°443-0511443-0510444-0511444-0510
Bicuspid – hook
-7°
0°
2°443-1511443-1510444-1511444-1510
Mandibular
Torq.
Anterior
Ang.
Rot.
-1°0°0°
.018 L
.018 R
.022 L
.022 R
443-0011
443-0010
444-0011
444-0010
Cuspid
-11°
+7°
2°443-0411443-0410444-0411444-0410
Cuspid – hook
-11°
+7°
2°443-1411443-1410444-1411444-1410
1st Bicuspid
-17°
-1°
+4°443-0611443-0610444-0611444-0610
2nd Bicuspid
-22°
-1°
+4°443-0711443-0710444-0711444-0710
Single-Patient Kits – Available in standard prescription
.018
.022
Upper 3 – 3, hooks on cuspids
746-4300
746-4400
Upper 5 – 5, hooks on cuspids
746-4301
746-4401
Upper/Lower 3 – 3, hooks on cuspids
746-4302
746-4402
Upper 5 – 5/Lower 3 – 3, hooks on cuspids
746-4303
746-4403
Upper/Lower 3 – 3, no hooks
746-4304
746-4404
Upper 5 – 5/Lower 3 – 3, no hooks
746-4305
746-4405
Upper/Lower 5 – 5, no hooks
746-4306
746-4406
Upper/Lower 5 – 5, hooks on cuspids
746-4307
746-4407
inspire iceTM : Super Torque & Special Options
Maxillary
Torq.
Ang.
Rot.
.018 L
.018 R
.022 L
.022 R
Central – super +22°
+5°
0°443-0143443-0142444-0143444-0142
Central – high +17°
+5°
0°443-0141443-0140444-0141444-0140
Lateral – super +14°
+8°
0°443-0243443-0242444-0243444-0242
Lateral – high +10°
+9°
0°443-0241443-0240444-0241444-0240
Cuspid – high
+7°
+10°
+4°443-0343443-0342444-0343444-0342
Cuspid with hook – super
+7°
+10°
+4°
443-1343
443-1342
444-1343
444-1342
Cuspid – high
+3°
+9°
+4°
443-0341
443-0340
Cuspid with hook – high
+3°
+9°
+4°
443-1341
443-1340
444-1341
444-1340
Cuspid – low angulation
-2°
+9°
+4°
443-0351
443-0350
444-0351
444-0350
Cuspid with hook – low angulation
-2°
+9°
+4°
443-1351
443-1350
444-1351
444-1350
Inspire ice : Auxiliary Products and Marketing Material
Inspire ICE debonding instrument
866-4020
762-4931
762-4935
ICE Brackets (Aesthetic Appliances)
Maxillary
Chapter 3 - Section 1 Inspire
inspire iceTM
Identification “Face-Paint”TM.
51
5 Express Aligner Treatment (Aesthetic Appliances)
Chapter 3 - Section 2 SImpli
52
Simpli5 System
TM
Express Aligner
Treatment
The right choice for minor corrections and
relapse cases! Treats patients in 3 to 5 months No
certification required.
Get your patients in and out of aligners fast
with Simpli5 Simpli5 is your best solution for cases
involving minor to moderate anterior crowding or spacing
and for or thodontic relapse cases.Simpli5 is available
through Ormco’s AOA Lab, the world’s leading orthodontic
appliance lab. Simpli5 includes five sets of sequential
clear trays for both dual and single arch cases. It requires
no special certification or time-consuming onlineverification. With a rapid turnaround of just 4 weeks, Simpli5 is
your fastest, simplest and most economical way to create
magnificent smiles for patients seeking a smile makeover.
Fast Most cases finish in 5 months or less Ideal for any
anterior case requiring minor to moderate corrections and
orthodontic relapse Impressions to aligners in just 4 weeks
Simple
No instruction, certification or ClinCheck required
- experienced AOA lab techs do the work for you Just send
your stone model and your prescription back to Ormco Europe
Arcades types
Rotated Upper incisors
Crowded Upper Arch
Upper Arch with spacing
Crowded Upper Arch
Generalized Lower spacing
Trapped Lower Laterals
Who are your ideal candidates for Simpli5?
Minor to moderate anterior crowding or spacing Minor orthodontic relapse
• Upper Arch with Spacing
• Crowded Upper Arch
• Rotated Upper Incisors
• Crowded Lower Arch
• Trapped Lower Laterals
• Generalized Lower Spacing
How to get started - Guideline
Ormco will only accept quality stone or plaster models using alginate or PVS impressions. Include a completed prescription form with email.
Allow 4 weeks for return of the entire series of aligners.
Step by step
• Patient Selection Mild to moderate anterior crowding or spacing, upper/lower 3-3. Up to 2.5mm of movement per tooth over
the 5 arch treatment.
• Impressions Ensure Ormco receive quality stone or orthodontic plaster models using alginate or PVS impressions. Impressions
cannot be accepted.
• Prescription Ask the patient for their chief concern and note on the form. Select “reset ideal” or “best overall result”. If reset
ideal is chosen and the most ideal result cannot be achieved with 5 aligners, then you will be notified.
• Shipping Place the pre-printed shipping label on the box and call the UPS number indicated.
• Return The Simpi5 system will be returned to your office with 4 weeks. All aligners will be included and marked in order of
wear. If you require more Simpli5 shipping boxes, please contact Ormco Europe or email [email protected]
Marketing Material
Simpli5 Counter Display (English)
762-6083
Simpli5 Doctor Brochure (English)
762-6070
Simpli5 Order Form (English)
762- 6064
Simpli5 Patient Brochure (English)
762-6098
Brackets
Chapter 4 Other
Chapter 4
Other
Brackets
53
Brackets
Chapter 4 - Section 1 Mini-Diamond
MINI-DIAMOND Brackets
TM
More than 40 years of clinical performance
The search for small glue-on attachments, which are less
visible and more aesthetic has lead Ormco to modify the
Diamond brackets, whilst keeping the advantages of the
Diamond system:
All the horizontal components of the base and the bracket
align in parallel with the incisor (or occlusal) edge of the
tooth.
• The mesiodistal dimension of the Mini Diamond brackets is enough
to control rotation.
• Smaller half-ball hooks for fixing the auxiliaries. Result: improved
comfort and aesthetics.
• Etched main axle line.
• Permanent marking system.
• More resistant materials and brackets with thinner walls allowing
greater space at the back of the plots and easier insertion of the
ligatures.
• Rounded vestibular contours, rendering the bracket less visible and
improving patient comfort.
• Significant reduction of the occlusogingival dimension, optimising
aesthetic attraction.
Grade 17-4 stainless steel
The use of 17-4 stainless steel enables the dimensions
of the Mini Diamond bracket to be reduced by 30%. The
metallurgical research carried out by Ormco has revealed
that the use of this stainless steel alloy enables significant
reduction of the thickness of the walls of the bracket and
even offers more solidity than the standard-dimension
brackets.
Premolar brackets with gingival offset
All Mini Diamond premolar brackets are now available with
gingival offset. The glue-on base is extended occlusally in
order to increase the bonding surface since the occlusal
third of the tooth is easier to etch.
Slim-Mini Brackets
These have the same qualities as the Mini Diamond
brackets. Their reduced mesiodistal dimensions, however,
further improve their aesthetic aspect and increase the
inter-bracket distance.
Maxillary
Torq. Ang.
M/D In/Out
.018 L
.018 R
350 0104 / Universal
.022 L
.022 R
Central
0°
0°
3.8
0.8
Central
+7°
+5°
3.8
0.8
350 0121
350 0120
351 0121
351 0120
Central
+14°
+5°
3.8
0.8
350 0131
350 0130
351 0131
351 0130
Central
+14°
+5°
3.4
0.8
350 0171
350 0170
351 0171
351 0170
Central
+22°
+5°
3.8
0.8
350 0141
350 0140
351 0141
351 0140
Central
+22°
+5°
3.4
0.8
350 0181
350 0180
351 0181
351 0180
Lateral
0°
0°
3.1
1.0
Lateral
0°
+8°
3.1
1 .0
350 0211
350 0210
Lateral
+3°
+8°
3.1
1.0
350 0241
350 0240
351 0241
351 0240
Lateral
+7°
+8°
3.1
1.0
350 0251
350 0250
351 0251
351 0250
Lateral – hook
+7°
+8°
3.1
1.0
350 1251
350 1250
351 1251
351 1250
Lateral
+7°
+8°
2.7
0.8
350 0271
350 0270
351 0271
351 0270
Lateral – hook
+7°
+8°
2.7
0.8
350 2271
350 2270
351 2271
351 2270
Lateral
+14°
+8°
3.1
0.8
350 0231
350 0230
351 0231
351 0230
Lateral
+14°
+8°
3.1
0.8
350 0261
350 0260
351 0261
351 0260
Lateral
+14°
+8°
2.7
0 .8
350 0281
350 0280
351 0281
351 0280
350 1321
350 1320
351 1321
351 1320
Cuspid – hook
-7°
+10°
3.4
0.5
Cuspid
0°
0°
3.4
0.5
Cuspid
0°
+10°
3.4
0.5
350 0331
350 0330
351 0331
351 0330
Cuspid – hook
0°
+10°
3.4
0.5
350 1331
350 1330
351 1331
351 1330
Cuspid
0°
+10°
3.2
0.5
350 0371
350 0370
351 0371
351 0370
0°
+10°
3.2
0.5
350 1371
350 1370
351 1371
351 1370
+7°
+7°
3.4
0.5
350 0351
350 0350
Cuspid – hook
Cuspid
54
The rhomboidal form of the bracket and of the glue-on
base offers numerous points of reference for the easy
and accurate positioning of the bracket. The vertical
components are lined up in parallel with the main axis of
the crown, whereas the horizontal components are lined
up in parallel with the incisor edge and the occlusion plane.
The Diamond shape in combination with the line that plots
the main axis, offers ultimate positioning accuracy.
Torq. Ang.
M/D* In/Out
Cuspid
+7°
+10°
3.4
0.5
Cuspid – hook
+7°
+10°
3.4
Cuspid – hook M/G
+7°
+10°
3.4
Cuspid
+7°
+10°
Cuspid – hook
+7°
Bicuspid
-7°
.018 L
.018 R
.022 L
350 0341
350 0340
0.5
350 1341
350 1340
0.5 350 1361
350 1360
3.2
0.5
350 0381
350 0380
351 0381
351 0380
+10°
3.2
0.5
350 1381
350 1380
351 1381
351 1380
0°
3.2
0.5
351 0340
Bicuspid**
-7°
0°
3.2
0.5
Bicuspid – hook
-7°
0°
3.2
0.5
350 1511
350 1510
351 1511
351 1510
Bicuspid – hook**
-7°
0°
3.2
0.5
350 1530
350 1531
351 1530
351 1531
Bicuspid – hook
-11°
0°
3.2
0.5
350 1613
350 1612
351 1613
351 1612
Bicuspid
0°
0°
3.2
0.5
Bicuspid**
0°
0°
3.2
0.5
Mandibular
Torq. Ang.
351 0341
.022 R
M/D In/Out
.018 L
.018 R
.022 L
.022 R
Anterior / semi-wedge
-6°
0°
2.3
1.2
Anterior / semi-wedge
-1°
0° 2.3
1.2
Anterior / semi-wedge / mini pad
-1°
0°
2.3
1.2
Anterior / semi-biseauté
0°
0°
2.3
1.2
Anterior / semi-biseauté
+4°
0°
2.3
1.2
Cuspid
-11°
+6°
3.2
0.4
350 0443
350 0442
351 0443
351 0442
Cuspid – hook
-11°
+6°
3.2
0.4
350 1443
350 1442
351 1443
351 1442
Cuspid
-7°
+6°
3.2
0.4
350 0433
350 0432
351 0433
351 0432
Cuspid – hook
-7°
+6°
3.2
0.4
350 1433
350 1432
351 1433
351 1432
Cuspid
0°
+6°
3.2
0.4 350 0423
350 0422
351 0423
351 0422
Cuspid – hook
0°
+6°
3.2
0.4 350 1423
350 1422
351 1423
351 1422
351 0463
351 0462
Cuspid
+7°
+5°
3.2
0.4
350 0463
350 0462
Cuspid – hook M/G
+7°
+5°
3.2
0.4
350 1473
350 1472
1st Bicuspid
-17°
0°
3.2
0.5
-17°
0°
3.2
0.5 1st Bicuspid**
-17°
0°
3.2
0.5
-17°
0°
3.2
0.5
1st Bicuspid
-11°
0°
3.2
0.5
-11°
0°
3.2
0.5 1st Bicuspid**
-11°
0°
3.2
0.5
1st Bicuspid – hook**
-11°
0°
3.2
0.5
2nd Bicuspid
-22°
0°
3.2
0.5
-22°
0°
3.2
0.5
2nd Bicuspid**
-22°
0°
3.2
0.5
-22°
0°
3.2
0.5 2nd Bicuspid
-17°
0°
3.2
0.5
-17°
0°
3.2
0.5
2nd Bicuspid**
-17°
0°
3.2
0.5
-17°
0°
3.2
0.5
350 1623
350 1622
350 1643
350 1642
350 1613
350 1612
350 1633
350 1632
350 1733
350 1732
350 1753
350 1752
350 1723
350 1722
350 1743
350 1742
351 1623
351 1622
351 1643
351 1642
351 1613
351 1612
351 1633
351 1632
Brackets with vertical slot
Maxillary
Chapter 4 - Section 2 Mini-Diamond
Mini-Diamond Brackets with vertical slot (.018x.018)
35 1733
351 1732
351 1753
351 1752
351 1723
351 1722
351 1743
351 1742
All hooks are disto-gingival unless other notification.
*
: i n mm (mesio/distal & thickness).
**
:g
ingivally offset brackets (offset base).
Available in Quad packaging.
55
Chapter 4 - Section 3 Mini-Diamond Brackets
Mini-Diamond Brackets with vertical slot (.018x.018)
Maxillary
Torq. Ang.
M/D In/Out
.018 L
.018 R
.022 L
.022 R
Central Vertical Slot
+14°
+5°
3.4
0.8
350 6131
350 6130
351 6131
351 6130
Lateral Vertical Slot
+7°
+8°
2.7
1.1
350 6251
350 6250
351 6251
351 6250
Cuspid Vertical Slot
0°
+10°
3.2
0.6
350 6331
350 6330
351 6331
351 6330
Cuspid - hook Vertical Slot
0° +10°
3.2
0.6
350 7331
350 7330
351 7331
351 7330
Bicuspid Vertical Slot
-7°
0°
3.2
0.6
350 6514 / Universel
Bicuspid Vertical Slot, G/O
-7°
0°
3.2
0.6
Bicuspid Bicuspid Vertical Slot
-0°
0°
3.2
0.6
Bicuspid Vertical Slot, G/O
-0°
0°
3.2
0.6
Torq.
A ng.
Anterior Vertical Slot, semi-wedge
-1°
0°
Cuspid Vertical Slot
-7°
+6°
3.2
0.6
Cuspid - hook Vertical Slot
-7°
+6°
3.2
0.6
1st Bicuspid Vertical Slot
-11°
0°
3.2
0.6
1st Bicuspid Vertical Slot, G/O
-11°
0°
3.2
0.6
2nd Bicuspid Vertical Slot
-17°
0°
3.2
0.6
2nd Bicuspid Vertical Slot, G/O
-17°
0°
3.2
0.6
Mandibulaire
M/D In/Out
2.3
.018 G
1.3
.018 D
.022 G
.022 D
350 6433
350 6432
351 6433
351 6432
350 7433
350 7432
351 7433
351 7432
All hooks are disto-gingival.
* : in mm (mesio/distal & thickness).
** : gingivally offset brackets (offset base).
*** : half-beveled
Tweed Brackets
Maxillary
Ang. Type M/D
In/Out
.022
Central
0°
0°
Single
2.5
0.7
Lataral
0°
0°
Single
2.5
0.7
Cuspid
0°
0°
Single
2.5
0.7
Bicuspid
0°
0°
Wedge single
2.0
0.5
Mandibular
56
Torq.
Torq.
Ang. Type M/D
In/Out
.022
Anterior
0°
0°
Wedge single
2.0
0.5
Cuspid
0°
0°
Wedge single
2.5
0.7
Bicuspid
0°
0°
Wedge single
2.0
0.5
and Curing Lights
Chapter 5 Bonding
Chapter 5
Bonding and
Curing Lights
57
and Curing Lights
Chapter 5 - Section 1 Bonding
Greengloo
Optiview
Optimal retraction without additional hands
or instruments.
1.Anatomically shaped maxillary and mandibular lip cradles
provide superior access to the buccal and gingival areas.
2.Lip cradles include an opening for the frenulum to provide
greater comfort.
3.Cushioned lip supports position the lips an ample distance
away from anterior teeth and gums.
4.Latex free and autoclavable at 273°F/134°C (3 minutes).
5.Autoclavable lip cushions can be removed from the frame
to facilitate cleaning.
Optiview
Référence
Small (blue)
(pack of 2)
740-0272
Standard (white)
(pack of 2)
740-0321
Pink pad / restocking
(pack of 10)
740-0273
Blugloo
Greengloo: is the two-way color change adhesive for
metal brackets that provides the strength, flexibility and
intelligent features you demand.
Strong
• Quick-cure polymerization provides greater sheer bond
strength at initial force loading
• Chemical affinity for metal brackets ensure more reliable
bond strength
Flexible
• 185% more working time than other light cure adhesives
allow for better placement
• Patented formula delivers up to 118% more impact resistance
for reduced emergency visits
Smart
• On-demand color change for fast and accurate cleanup at
bonding and debonding
• Light cures in as little as 5 seconds for reduced chair time.
Syringe Kit
740-0320
Unidose™
Kit 740-0322
Contains:
Contains:
• Adhesive (two 4 g Syringes)
• Adhesive (four Unidose 10-packs
• Bottle Ortho Solo (5 ml)
-8 g total)
• Etching Solution (10 ml)
• Bottle Ortho Solo (5 ml)
• Sealant Applicator Brushes (38)
• Spatulas (75)
• Spatulas (75)
See What You’ve Been Missing!
• Unidose Gun
Blugloo provides color contrast when you need it and is
clear when you don’t. Bracket placement and cleanup have
never been easier.
Color on demand : The color contrast of Blugloo during
bonding facilitates fast, accurate bracket placement and
makes it easy to remove unwanted flash. As Blugloo warms
to body temperature, the color virtually disappears, remain
ing clear throughout treatment. When debonding, simply
introduce a short blast of cool air or water to lower the bonding
surface temperature, and Blugloo turns blue again for easy
and thorough cleanup.
Made for aesthetics, but great on metal: la Blugloo’s
advanced formulation and color stability have been optimized for
aesthetic brackets such as Damon Clear™, Damon™3, Nexus Clear™
and Inspire ICE™, plus it’s excellent for metal brackets. Blugloo
ensures reliable bond strengths in even the most challenging cases.
Syringe Kit
740-0274
740-0275
Contains:
• Adhesive (two 4 g syringes-
• Adhesive (four Unidose10 - packs8 g total)
8 g total)
• Ortho Solo Primer (5 ml)
• Spatulas (75)38)
58
Unidose™ Kit
Contains:
• Ortho Solo Primer (5 ml)
• Spatulas (75)
• Unidose Gun
Réassortiment
Référence
Blugloo syringe (4 g)
Blugloo syringe (4 g)
2 packs of 10 Blugloo unidoses (4 g in total)
2 packs of 10 Blugloo unidoses (4 g in total)
1 bottle of Ortho Solo (5 ml)
Etching liquid bottle (10 ml)
75 Brushes
75 Spatulas
Gun
740-0272
740-0321
740-0273
740-0323
740-0271
740-0038
740-0041
740-0075
740-0200
Ortho Solo™ is a fluoride -releasing universal sealant and bond
enhancer. With light-cure and paste-paste systems, Ortho Solo replaces
the sealant. With no-mix chemicalcure systems, Ortho Solo should be
used in addition to the activator for best results.
Ortho Solo incorporates a bond-enhancing property that
improves adhesion to the tooth at the adhesive interface,
hence reducing bond failures. The glass filler, unique to Ortho
Solo, acts as a stress and shock absorber, preventing cracks
that can lead to bond failures. This formulation also releases
fluoride where you need it the most at the enamelresin
interface.
With Ortho Solo, no air-dry or light-cure step is needed, thereby
saving valuable chair time. It also includes a compound that
displaces moisture, making the technique more forgiving
when a dry field is inadvertently compromised.
Ortho Solo Kit
740-0270
Ortho Solo Refill
Contains
• Ortho Solo (four 5 ml bottles)
• Applicator Brushes (75)
• Disposable Wells (1 pkg)
• Ortho Solo Technique Card
Contains
740-0271
Engineered with Demetron expertise, the leading manufacturer of curing lights, the Demi Ortho is designed
to specifically suit the needs of the Orthodontist. This
s l eek L ED c u r i n g li gh t em p lo y s a u n i qu e w a ve l e n g t h
that optimally cures orthodontic materials, providing
enhanced performance and consistent cures. The Demi
Ortho allows you to focus on what’s truly important-your
practice.
• Lightweight and Ergonomic – Sleek, compact and portable, just
5.5 oz. measuring 9.25» x 1.2» with multiple holding options
to reduce hand and arm stress.
• Interchangeable Lithium Ion Battery-One full charged
battery yields 3 to 4 days working time.
• 8-minute Sleep Mode – Maximizes battery life and
optimizes workflow.
• Shorter Curing Times – Periodic Level Shifting (PLS) keeps
cure times at a minimum without excess heat.
• Multiple Curing Time Selections. – 5-, 10- and 20- second
preset time settings reflect short curing times.
• Light Guide Options – Accommodates alternate Demetron
light guides.
• Ortho Solo (four 5 ml bottles)
Box of 10 Sticks
(1 .2 ml total)
740-0269
Optiband Ultra
KE0 910-0770
Contains :
• Hand piece
• 1 Battery
• Turbo Tip 8mm
and Curing Lights
L.E.D Light Curing System
Chapter 5 - Section 2 Bonding
Demi Ortho
Ortho Solo
• Eye protection shield
• Universal charger / converter
• Hardness disk
• Protective covers
• User’s manual
Demi Ortho Battery 092-1653
This last generation single-paste fluoridated light-cure cement
features «adhesion boosters».
The single-paste syringe system makes handling easy and reduces
product flash. The product can be applied directly on the band or
on the tooth for bite ramps.
- E xcellent adhesion to band and enamel surfaces.
-R
educed risk of cross contamination.
- E asy cleaning before and after banding.
- Efficient prevention of decalcification.
• 1.8 g per syringe
• Single use tips
Name
P/N
5 syringes kit: tooth colored
10 syringes kit: tooth colored
5 syringes kit: blue
10 syringes kit: blue
Restocking tips
10 tips740-0291
20 tips740-0292
10 tips740-0293
10 tips740-0294
50 tips740-0295
59
60
VectorTAS Temporary Anchorage System
Chapter 6
Chapter 6
VectorTAS Temporary
Anchorage
System
61
Starter Kit
Simple System
VectorTAS is the only complete system that combines userfriendly protocols, products, packaging and mechanics to
simplify your treatment and improve patient care.
- Simple color-coded atlas guides proper miniscrew selection
-C
omplete starter kit for one-stop shopping
- N eedle-free anesthesia for greater comfort and improved
patient acceptance
Color
- S TARTER KIT (10 - Patient)
• Assorted minivis
• Assorted springs
• Screwdriver and tips
• Pre-drilling broach
601-0010
Recommended Implant Sites
ou
Facial & Lingual Surfaces – Maxillary/
mandibular alveolar ridge (mesial to
second molar)
Thread Forming VS. Thread Cutting
- E ach VectorTAS miniscrew is sized and equipped with a specific
thread design based on the soft-tissue depth and density of bone
in its designated placement area.
Retromolar Area
Intelligent Attachments
Infrazygomatic Crest
Miniscrews VectorTAS (PK6)
6 mm
8 mm
10 mm
12 mm
P/N
601-0020
601-0021
601-0022
601-0023
Crimpable hook
- F or a clinical selection of the orientation of force vectors.
Delta-shaped bonding buttons
601-0051
- T o use specific springs, without ligatures..
601-0050
Flat base
601-0051
Consultation Typodont
Workbook
Instrument, no tip
40 mm Tip – pack of 2
22 mm Tip – pack of 2
Tissue chisel – pack of 6
Initiator – pack of 2
Contra-angle, no tip
Sterilization kit
- V ectorTAS includes an assortment of TAD-specific auxiliaries to
maximize the vectors and force levels used in skeletal anchorage,
providing you with more controlled movement and better force
management.
Double-Delta Head
- Greater patient comfort
- Wider and flatter for greater surface area
- No sharp edges from wire slots or hex bolts
-G
reater clinical flexibility
- Provides a self-ligating lock on VectorTAS attachments for
ease of use and secure engagement
- Allows mid-treatment adjustment without removal of attacments
VectorTAS SINGLE DELTA
Curved base
Auxiliary Products
62
• Tissue chisel
• Sterilization kit
• User’s manual
• Typodont for consultation
Facial Surface – Maxillary/mandibular
alveolar ridge (mesial to cuspid),
mandibular symphysis
Chapter 6
VectorTas Temporary Anchorage System
VectorTas System
P/N
717-1050
700-0149
601-0001
601-0011
601-0012
601-0003
601-0002
601-0001
601-0008
10 10 10 5
5
5
mm
mm
mm
mm
mm
mm
P/N
50 g
150 g
250 g
50 g
150 g
250 g
601-0030
601-0031
601-0032
601-0033
601-0034
601-0035
VectorTAS DOUBLE DELTA
5 mm
10 mm
P/N
150 g
150 g
601-0036
601-0037
Marketing Material
Technique Card (English)
Workbook (English)
Demonstration DVD
Chairside Protocol (English)
P/N
762-4974
762-4978
070-5546
070-5529
762-4970
www.ormcoeurope.com
Ormco Europe B.V.
Basicweg 20, 3821 BR Amersfoort,
The Netherlands
www.ormcoeurope.com
Customer service (Toll free)
Tel.: 00800 3032 3032 Fax: 00800 5000 4000
Email: [email protected]
762-6270 Rev.A

mini CATALOGUE

Transcription

Similar documents

FLAT PACK GRAPPLING HOOK

Join the Movement.

April 15, 2007 - 610-0029 and 610

AL 4 ENG - GIF Modul Kft

Gartside Gurgler

In Black and White

Fitting Instructions for 1050mm or 1200mm Canopy

Waterhen Bloa - Total Flyfisher Magazine

Super 100 Large Capacity Chain Hoist (16 to 50 ton capacity)

information - Sandy Hook Foundation