Fast and easy credit

Transcription

John Deere Cotton Harvesting
Fast and easy credit
Why John Deere Credit?
Because they work with my dealer
to design the finance package that fits
my operation. It’s the most efficient
way to get the equipment I need.
And they understand my business,
which makes credit approvals
fast and easy.
w w w . J o h n D e e r e C r e d i t . c o m • 1- 8 0 0 - 3 6 2 - 8 5 8 0
A sk your dealer for J ohn Deere C redit financing.*
*Subject to John Deere Credit approval.
TM
DSAA39362 Litho in U.S.A. (08-03)
This literature
has has
been
compiled
forfor
worldwide
general information,
information,pictures,
pictures,
descriptions
provided,
illustrations
This literature
been
compiled
worldwidecirculation.
circulation. While
While general
andand
descriptions
are are
provided,
somesome
illustrations
and text
include
finance,
insurance,
accessoriesNOT
NOTAVAILABLE
AVAILABLE
in regions.
all regions.
PLEASE
CONTACT
DEALER
and may
text may
include
finance,
insurance,product
productoptions
options and accessories
in all
PLEASE
CONTACT
YOURYOUR
LOCALLOCAL
DEALER
FOR DETAILS.
JohnJohn
Deere
reserves
thethe
right
designand
andprice
priceofofproducts
products
described
in this
literature
without
FOR DETAILS.
Deere
reserves
righttotochange
changespecifications,
specifications, design
described
in this
literature
without
notice.notice.
www.JohnDeere.com/Ag
www.JohnDeere.com/Ag
®
We are
We
are proud
proud
to support
to
support FFA
FFA
®
NEW 7760 Pickers • 9996 Pickers • 9970 Pickers • 7460 Strippers
John Deere Cotton Harvesters
From the non-stop harvesting
ability of the revolutionary new
7760 Cotton Picker to the economical
four-row 9970 Cotton Picker,
John Deere offers solutions to the
harvesting challenges faced by
cotton producers around the world.
Start with the newest addition
to our line: the 7760 Cotton Picker.
For years, growers have asked for
a simpler harvest…without all the
specialized equipment, dedicated
manpower, and associated costs.
Our answer? The 7760 Cotton Picker.
Finally, no boll buggies. No module
builders. No extra tractors. Just nonstop harvesting.
In addition to the 7760, John Deere
builds two of the most efficient, fieldproven basket-type cotton pickers
available. The 9996 gives you six rows
of harvesting power, with a 1,400
cubic-foot basket and 350 horses in
the engine compartment. For growers
who need a mid-sized machine,
the 9970 offers many of the same
features as the 9996, in a four-row,
1,100 cubic-foot package.
Finally, stripper-cotton growers
can get the high-quality harvest they
need with the 7460 Cotton Stripper,
offering up to eight rows of cottonstripping power.
10 models,
unleash
up to 500innovation.
horsepower.
JohnChoose
Deere:from
The leader
in cotton
ha rvesting
The on-board module-building ability of the
new 7760 Cotton Picker allows you to form and
wrap a round module, then carry it to an endrow or staging area...all while continuing to
pick and form the next module.
The 9996 Cotton Picker gives you six rows of
high-efficiency picking power, plus a 1,400
cubic-foot basket and 350-horsepower John
Deere engine. PRO-16 Row Units do the hard
work, while the available PRO-12 VRS Units
allow you to harvest row spacings from 15 to
40 inches, in skip-row or solid patterns.
Table of contents
New 7760 Cotton Harvester 4-9
9996 Chassis/Engine/Transmission10-11
9996 Cotton Handling/PRO-LIFT™ 12-13
9996 Cab and Controls
14-15
9970 Cotton Picker
16-17
9970 Cab and Controls
18-19
9970 Handling/Engine/Final Drive20-21
7460 Cotton Stripper
When equipped with the 748 Header, the 7460 Stripper offers
cotton growers up to eight rows of harvesting power.
From the row units to the cab and controls, the 9970 Cotton
Picker offers many of the same features found in the big
9996...in a smaller, four or five-row configuration, perfect
for small to mid-sized farms.
22-27
Pro-12™ and Pro-16™ Row Units 28-29
Guidance and Documentation
30-31
Service and Support
32-33
Specifications
34-35
Visit www.JohnDeere.com/Ag for more
details on the complete line of John Deere
cotton harvesters.
John Deere 7760 Cotton Harvester
From the worldwide leader in cotton
harvesting equipment comes the next
revolution in cotton production: the
John Deere 7760 Cotton Picker with
on-board module-building technology.
Non-Stop Cotton Harvesting: Coming soon, only from John Deere.
The John Deere
Advantage
The new 7760 gives you everything
John Deere cotton pickers are known
for: a clean, high-efficiency pick from
the PRO-16™ and PRO-12 VRS™ Row
Units. Smooth, reliable power from the
John Deere turbocharged diesel engine.
An operator-friendly cab with easy
access to major controls.
But what the 7760 offers that no other
cotton harvester can match is this:
the ability to pick virtually non-stop.
No stopping to unload. No crossing
the field to get to a module builder.
No waiting for boll buggies. No time
wasted getting back on the row. The
7760 gives you a perfectly formed and
wrapped module that you can drop in
place or carry to an end-row, all while
continuing to harvest.
The non-stop cotton harvest...coming
soon, only from John Deere. Read on
for more information.
Whether it’s falling from the sky or being wicked up
from the ground, water is a chief enemy of
rectangular cotton modules covered with tarps. The
John Deere 7760 gives you a module that not only
sheds water due to its round shape, but is also
covered around its entire circumference with a
tough, protective wrap, giving you an exceptionally
high degree of weather-ability and helping preserve
the fiber quality you worked hard to achieve.
Take a look in your equipment shed.
Think about what those module
builders cost. And the boll buggies.
Think about the number of tractors
you need to run it all. And how much
fuel they use. Add labor and insurance,
and you have a good idea of what your
harvest costs are, just in miscellaneous
equipment.
The economics of non-stop harvestin g
What can the non-stop harvesting ability of
the 7760 Picker do for you? If your harvest
usually takes four weeks, the 7760 could
help you finish up to five days earlier.
Now consider the 7760. No module
builders. No buggies. No tarping. A
significant reduction in labor and fuel.
Right there are thousands of dollars
you don’t have to spend.
Stage or load your round modules with the Frontier CM 1100 Round Module
Handler. This loader mounts on the rear of your tractor, and makes handling the
7760’s round modules easy.
But there’s this, too. A basket picker
can spend 20% or more of its time
unloading, waiting for boll buggies,
or driving back and forth to a module
builder. With its non-stop harvesting
ability, the 7760 Picker gives you that
time back.
What is that time worth? Your
John Deere dealer can help you decide.
Value Statement goes here –
Our standard lighting package is
very good, too. It includes two
55/65-watt low-beam
In addition to its inherent water-shedding ability, the round
shape of the completed modules enables the non-stop harvesting
ability of the 7760 Picker. How? Once you’ve picked enough cotton,
the module-forming system on the 7760 Cotton Picker takes over.
While you continue to harvest, the 7760 automatically forms and
wraps a module, then deposits the completed module onto the
retractable rear handling gate. You can then carry the wrapped
module to an end-row or other staging area and drop it without ever
stopping the picker.
The wrap ‘magazine’ on
the 7760 Picker holds up
to four rolls, giving you
enough wrap for up to
100 round modules.
With only slight modifications to the conveyor chain, existing module trucks can
easily pick up, haul, and unload up to four wrapped round modules...the equivalent of
one full-size standard module.
Non-stop harvesting requires all-day
comfort. So we gave the 7760 Cotton
Picker the comfort, convenience, and
control features to reduce fatigue and
enhance operator environment during
the longest harvest days.
The pressurized cab itself features
our set-and-forget ClimaTrak™
Automatic temperature control, as well
as the plush ComfortCommand™ airsuspended seat. The standard training
seat lifts to reveal a storage area for
miscellaneous items. The cab is prewired for two-way radio, and features
the Delco AM/FM satellite-ready
sound system with CD.
The new CommandCenter™
display serves as the primary operator
interface, and first source for machine
information. Hot-key navigation
takes you through screens displaying
information on settings, alarms, and
diagnostic information.
Just in front of the display, the
multifunction control handle and
CommandTouch™ console offer
control over machine speed, row units,
module builder, Row-Trak™ guidance
and more.
Finally, the CommandTouch™
cornerpost monitors display engine
RPM, harvest information, and
Value
Statement
goes here –
module-builder
status.
55/65-watt low-beam
Non-Stop Comfort for the Non-Stop Harvest.
Convenient control with the CommandCenter
Information at a glance
The CommandTouch cornerpost display gives
the operator an assortment of readings,
including engine RPM, harvest monitor, and
module-builder status.
Out of the way. Easy to see.
The GS2 2600 Monitor with the HarvestDoc™ Cotton system
handles yield monitoring and mapping functions. The monitor
provides information such as total acres harvested, average
yield, harvest hours, load weight, distance covered and
more. Plus, the monitor and the StarFire iTC receiver can be
moved to your tractor, sprayer or combine.
The standard remote
allows the operator to put
the machine into and out of
transport and harvest
modes quickly and easily.
Tethered row unit lube
system is standard on
every John Deere
cotton picker.
The all-new CommandCenter display and CommandTouch console
give the operator unprecedented control over vital machine functions,
as well as easy access to information. The display offers information on
alarms, diagnostics, and more. The console features controls for fan
and row unit engagement, lubrication system, Row-Trak guidance, row
unit height and response rate, moistener system, and more.
10 9996 Cotton Picker
If you want a basket-type cotton
picker, but still need the fastest
harvest you can get, take a look at the
9996 Cotton Picker...the most
productive, most efficient basket
picker we’ve ever built.
Start in the engine compartment.
With 350 horsepower and a 9.5 percent
Power Boost for unloading, the 8.1-liter
PowerTech™ engine delivers plenty of
muscle for the demands of a 6-row
machine in heavy-yielding cotton and
tough conditions. Plus, the engine is
transverse mounted, freeing up valuable
space for the moistener system, lube and
fuel tanks.
An available factory-installed powered
rear axle gives you better grip in muddy
or hilly conditions, while the 200-gallon
fuel tank and 345-gallon water tank
keep you in the field longer.
Out front, the PRO-16 Row Units offer
a high-efficiency pick, even at speeds of
up to 4.0 MPH, or second-gear speeds of
up to 4.9 MPH. With the Row-Trak
guidance system, you and your operators
are picking at top speed with ease and
comfort in dense, heavy-yielding cotton,
all while Row-Track handles on-row
steering.
The 9996: Built to run strong, acre after acre
An 8.1-L PowerTech ™ engine delivers 350 acre-taming horsepower that boosts harvesting performance
in high-yielding cotton and difficult field conditions. Plus, a 9.5 percent Power Boost (up to 383 hp) provides extra power when compacting cotton. What’s more, the frame design and transverse-mounted
engine ensure efficient use of this raw power. The 9996 Picker’s lower overall weight and well-balanced
design allows it to perform at a higher level than heavier competitive models that require extra power.
Talk about strength! With 7x7-inch row-unit lift arms and a massive all-welded chassis,
the 9996 Picker offers ample backbone for six row units, big basket loads, and rough harvest
conditions. Notice the transverse-mounted engine. John Deere
engineers located the water, lube, and fuel tanks at the rear of the
machine, greatly reducing front-axle weight. The excellent weight-tohorsepower ratio, weight distribution, and dual tires (standard on 6-row
machines) result in outstanding flotation, unmatched maneuverability,
and unrivaled ride quality.
Six standard forward-facing
lights help provide 360-degree
lighting for nighttime harvesting. A
light inside the basket illuminates
the entire area. The optional
lighting package adds two field
lamps and two sidefinder lights.
Large self-cleaning
rotary screen saves
time, labor. No need
to manually clean the
screen at each dump.
The hydro module contains the
hydrostatic, hydraulic, and water
pumps, as well as batteries and
onboard lube remote-fill outlets.
All are easily accessed from
ground level.
Independent
hydro systems
assure full power
to the picking
units and ground
drives.
Eight-inch dual spacers offer
true 38-inch centers. No more
running the front tires over
beds. Massive, single-reduction
final drives have the muscle
to handle 42-inch duals.
11
Get your crop from field to module builder faster and easier
High-capacity PRO-Series™ Row
Units need a high-performance
loading and unloading system.
So we designed the 9996 with
the air control, basket lift and
unloading components you need
to pick, pack and dump heavy,
high-yielding cotton.
High-capacity conveying.
The fan rotor delivers plenty of
airflow to handle the conveying
load of six row units. Plus, the
transverse-mounted engine design
let engineers relocate the fan for
improved air distribution and
outstanding conveying efficiency.
High-capacity basket. You
also have plenty of capacity – 1,400
cubic feet with standard basket lid
extension. And a new, automatic
compacting system packs in more
of your crop to extend on-row time.
What’s more, the basket screen
pattern provides greater strength
and improves screen-to-frame fit.
High-capacity unloading.
The PRO-LIFT™ basket also offers
an innovative unloading system.
The basket raises at an angle as
the door lowers, giving you
excellent stability and letting you
put the basket right where it’s
needed. Plus, lift frame members
are stronger, for increased machine
stability and operator confidence.
13
The moveable duct support structure
extends automatically whenever the
basket extension is raised. No more
flipper doors or chains to manipulate,
with less cotton loss to the sides. And
best of all, the duct system allows a
basket capacity of 1,400 cubic feet
with standard basket lid extension.
The “basket full” monitor lets the
operator know when the basket is
almost full. The optical-signal system
features a transmitter and receiver
mounted on the upper side screens.
Operators are alerted with a visual
and audible alarm.
Two conveyors – one on
the door and one in the
basket – move a high
volume of crop for less
time at the dump site.
Three compacting augers pack a
dense payload for longer on-row time
between dumps. Power Boost supplies
extra horsepower when compacting.
The augers activate automatically for
20 seconds when the basket is nearly
full. Or, you can manually engage the
augers with a foot switch.
1
2
3
Enjoy unprecedented unloading control with the
PRO-LIFT basket. Notice how the basket raises
at an angle as the door lowers. This unique design
keeps the center of gravity close to the mid-point
of the machine, providing exceptional stability …
especially on uneven terrain. You can vary the
unloading height from 5 feet 8 inches to as high as
13 feet 9 1⁄ 2 inches. And you can position the door
for optimum unloading control and less spillage. A
door extension is standard on all 6-row machines
with duals and is available as an option on
4-row machines.
The conveyor on the
door can be operated
independently for fast,
easy, precise topping
off of modules.
Run hard. Ride easy.
The world’s best basket picker
comes equipped with one of the
industry’s plushest cabs … a
quiet, comfortable environment that
reduces fatigue, enhances efficiency,
and lets you take full control of tight
harvest schedules.
Climb up and take a look. Thanks
to the spacious cab and sensible
arrangement of the seat and
controls, getting in and out of
the cab is easy.
Buckle yourself into the
ComfortCommand seat, which
adjusts five ways to keep you and
your operators more comfortable.
With the air-suspension seat you’ll
experience the ultimate in operator
comfort. There’s even a training seat
to keep you comfortable while you
teach inexperienced operators.
And what a view! You get an
unobstructed panorama of the entire
width of the row-unit toolbar, even in
a 6-row configuration. No need to
lean forward or crane your neck.
15
You won’t find a more comfortable
ride in your fields or on the road.
The cab design puts you right
on top of the action with a
clear view of the crop, row
units, and the space in front
of your machine.
The ComfortCommand seat with deluxe
suspension adjusts perfectly to the driver,
relieving fatigue and improving efficiency.
The air suspension seat provides a truly
luxurious ride. Both seats have a standard
operator-presence system.
The large cab includes a
wide variety of storage options,
including this handy area
behind the seat – a perfect
place to keep those smaller
items you frequently use.
The training seat provides an ideal
place to sit when teaching new
operators. Both the training seat
and driver’s seat are equipped with
standard seat belts.
Some say home is
where you hang your
hat … here’s another
reason you’ll feel
perfectly at home in the
9996 Cotton Picker.
Standard mirrors mounted
on the operator’s platform
provide all-around visibility.
Requires less swiveling
in your seat while reversing.
An unmatched combination
of proven performance and
productive refinements.
John Deere Pickers have a welldeserved reputation for harvesting
productivity, row-spacing flexibility,
and season-long dependability. And
the 9970 Picker has taken its place
as the picker of choice for growers
looking for outstanding value in a
4- or 5-row machine.
Indeed, the 9970 Picker is
a smart choice … thanks to
high-performance PRO-12 row
units that add much-greater
service convenience, and nice
cab enhancements that make life a little easier during the long days
of harvest.
9970 Picker: The top pick for val ue
Automatic height-sensing lets
you run the units along the ground
to pick up low-hanging bolls. When
the height-sensing shoe reaches a
change in ground contour, a valve
sends hydraulic oil directly to the unit
lift cylinders. Response is immediate.
17
Enjoy great row-spacing
versatility and row-unit
service convenience. With 16 row
spacing options, the 9970 Picker
offers plenty of flexibility for your
cotton planting plans. You can choose
a 15-, 30-, 32-, 36-, 38-, or 40-inch
four row configuration. Or, a 15-, 30-,
32-, or 36-inch five row configuration.
You’ll also have the option of
harvesting in 60- and 64-inch skiprow patterns. Changing row spacings
is a snap with the patented John
Deere crank and roller system.
PRO-12 row units offer the
benefits of lightweight design and allnew service convenience.
Remote onboard lubrication is
a standard feature on the 9970
Picker. Just one more way
John Deere delivers better value for
your picker investment.
PRO-12 row units feature 12-bar front and rear
drums, each with 18-spindle-high bars. Swing-out
moistener columns make servicing a snap.
For maximum versatility, choose the
PRO-12 VRS row units. This system
allows you to spindle-pick rows
spaced from 15 to 40 inches
… perfect for growers with
a blend of narrow- and
conventional-row cotton.
Proven crank and
roller system
makes row-spacing
changeover fast
and easy.
Productive comfort and simple,
efficient controls. Now it’s easier
than ever to stay on top of harvesting
thanks to the 9970 Picker’s SoundGard-styled cab.
It starts with comfort. You’re
surrounded by it in a 9970. For
instance, you’ll love the simple,
straightforward controls. The
hydrostatic drive gives you smooth
speed changes. And the hydrostatic
handle offers push-button control of
frequently used row-unit and basket
functions. Most other controls are
conveniently located next to the righthand armrest. You have fingertip
control of water solution pressure,
onboard lubrication, basket telescoping,
basket dumping, and fan operation.
Simple monitors assure full harvest
control. All monitors and gauges are
located on the right-hand cornerpost –
in view, but not in the way. Simple to
understand, these monitors constantly
survey various functions and instantly
alert you, with both visible and audible
signals, if a problem occurs.
Outstanding comfort and control
A large, tinted windshield
provides an unobstructed
view of the rows and the
picking units. You’ll also
appreciate the mirrors that
give you a clear view to
the rear.
The overhead console provides easy
access to the standard heating and airconditioning controls. An AM/FM radio
with CD and weatherband is also
standard equipment.
A tilt-and-telescoping steering wheel fits the
way you like to drive. And a PersonalPosture™ seat provides all-day support and
comfort, so you work more alertly.
The hydrostatic lever gives you
smooth control of ground speed.
Electrohydraulic controls provide
push-button operation of raising and
lowering row units, starting and
stopping unloading conveyor, and
engaging height-sensing system.
19
A dual digital readout provides
engine and fan speed, moistenersystem pressure, and oil
temperature. Any problem with
the picking units, such as plugging,
is identified quickly with Harvest
System monitors. Additional
monitors alert you to problems with
hydraulic/hydrostatic oil
temperature, air filter restriction,
engine oil pressure, and engine
coolant temperature. There’s even
an indicator that tells you when all
the conditions have been met
for operating the remote tether.
High-capacity conveying, largepayload basket, plus fast dump
cycles. Getting your crop from the
picking units to the basket rests on
the shoulders of the proven
John Deere Jet-Air-Trol™ conveying
system. A high-capacity fan delivers
strong, constant airflow for moving a
large volume of cotton, with less
chance of plugging. (A proven
doffer-zone monitor alerts operators
instantly of any problems with
cotton flow, helping prevent
downtime.)
With a standard 1,173-cubicfoot-capacity basket and John Deere
three-auger compactor system, the
basket provides a large payload for
longer on-row time. It also provides
extra-fast dumping cycles and good
unloading control. You can lower the
basket for transport, or raise it up to
one of two working positions, in just
a few minutes.
Big capacity, fast unloading
Robust PowerTech engine
™
An extremely efficient, high-performance
turbocharger offers great air-handling
capacity, boosting torque rise and
maintaining low fuel consumption at
all speeds and at any load.
It’s easy to switch between a
12-foot 4-inch transport height to
one of two field positions: 14-foot
10-inch (1,065-cubic-foot capacity)
or 15-foot 10-inch (1,173-cubic-foot
capacity). Lowering the basket is just
as easy. There are no conveyor
chutes to disassemble. You control
raising and lowering from the cab
electrohydraulically.
Dependable John Deere 6.8-L
PowerTech engine, loadconquering final drives. A 415cubic-inch powerplant delivers 250
turbocharged horsepower, plenty
for the big power demands of five
picking units, high-yielding crop,
heavy basket loads, and soft soil.
Plus, this emissions-certified
engine offers fuel economy that
stretches every drop from the big
120-gallon fuel tank, so you can
pick all day without refueling.
For smooth speed control,
the 9970 Picker features a
3-speed transmission with
hydrostatic drive. It offers a 3.8mph first-gear picking speed, 4.5mph second-gear scrapping speed,
and a 15.5-mph transport speed.
With the Row-Trak Guidance
System, you’ll see an increase in
efficiency. Not only will there be more
cotton in the basket, but the system
also helps keep operator stress and
fatigue at a minimum.
Three augers distribute and pack cotton
into the 9970 Picker’s large basket. The
auger in the lid helps “meter” cotton for easier
control of unloading. Notice how the basket
extends well over the module for faster
unloading, less spillage. An optional dump
extension is available for even more control.
9970 Cotton Picker
The 250-horsepower 6.8-liter
PowerTech Plus engine
provides constant power and
excellent low-speed torque. It
also features remarkable fuel
economy, minimizing time spent
refilling diesel tanks.
Dependable John Deere final
drives carry the weight of
harvesting. Massive, strong,
proven-reliable, the simple gearreduction design handles heavy
loads easily.
21
22 7460 Cotton Stripper
If you harvest big stripper-cotton
acreage, you need the productivity of
the John Deere 7460 Cotton Stripper,
equipped with the 748 Header.
Here’s how we built productivity
into virtually every function.
• The 7460 offers up to 173 engine
horsepower.
• A factory-built 8-row modular head
with gear drives adds reliability.
• The air system conveys up to 20
percent more cotton than the 7455.
• Basket raise and lower cycles are
25 percent faster than predecessors.
• Electronic header height control
automatically adjusts for uneven
terrain.
But as productive as it is, the 7460
is surprisingly comfortable to operate.
The ComfortCommand™ cab offers
easy to use controls, and more glass
area for improved visibility. The header
is farther forward to give you a better
view of the cotton entering the row
units, and reduce the strain from
leaning over the steering wheel.
Got big stripper acreage?
Unleash the 7460 Cotton Stripper
from John Deere.
55/65-watt low-beam
For Demanding Producers: Produ ctivity on Demand
Configurations
Narrow
4-row 4-row skip
X
5-row X
6-row X
6-row skip
X
8-row X
23
Productivity requires power. So when we designed the 7460, we
started with the proven John Deere PowerTech 6.8 L engine.
But then we added even more power. Ten percent more, to
be exact, so you can pull in a full 8 rows of high-yielding cotton.
And because it’s a John Deere PowerTech engine, you know it’s
designed and built especially for tough agricultural applications.
The fuel tank is 26 percent larger than our previous stripper,
too. With a capacity of 120 gallons, you can run longer between
fill-ups and make the most of every minute in the field.
What else? Try an electronic throttle control for smoother
operation. A 200-amp alternator to handle the new available
lighting system and other electronics. It all helps to make
the 7460 a supremely powerful cotton harvester. Put the
7460 to work, and you’ll see what we mean.
Wide
X
X
X
X
X
X
Harvest up to eight rows per pass. The new
7460 Cotton Stripper can tear through fields
quickly, thanks to the factory-built, John Deere
dealer-supported 8-row 748 modular header.
To make your tough days a little easier, we gave the
7460 Cotton Stripper our premiere operator station – the
ComfortCommand cab.
ComfortCommand cab gives you more room and more
features than any cab we’ve ever put on a cotton stripper.
First, this new cab has been positioned for a better view of
the cotton entering the row units – no need to lean or strain.
The ComfortCommand suspension seat helps reduce
fatigue and improve operator efficiency. A variety of storage
compartments let you organize and store snacks, drinks, a
cell phone or other necessities. All the vital controls are
within easy reach for smooth, efficient operation. And to top
it off, the standard training seat gives new operators a place
to sit and observe, or you a place to sit while training.
Step into the new Comfort-Command cab and see for
yourself what big comfort and productivity is all about.
No belts, no slips, no breaks. Each
row unit is driven by a fully-enclosed
gear train with high-contact ratio
gears for reduced noise and
increased load-bearing capacity.
8-row double-flighting.
Double flighting on 8-row wide
header configurations provides
smooth feeding of harvested
cotton for higher productivity.
Eight to six – no
problem. The
modular-head design
lets you change rows
and spacing quickly
and easily.
Wide, narrow or skip.
Productive and versatile –
the 748 header adjusts to
just about any row spacing
or configuration.
More clearance, less
damage. Raising the
header fully lifts the row
units an extra 14 inches to
avoid potential damage.
You can’t harvest cotton your
stripper can’t reach. That’s why
every 7460 Stripper comes with
Electronic Header Height Control
(EHHC).
The EHHC system automatically
adjusts the height of the row units to
stay close to the ground, even at fast
harvesting speeds. So you can be
confident you’re pulling in all of your
year’s hard work. You’re bound to
pick up bolls you would have missed
with previous machines.
From the cab, you can adjust the
header height and response rate, as
well as individual unit height. There
are no more batches of levers on
each side of the steering wheel.
Instead, simple buttons raise and
lower the row unit.
Cat-like reflexes are the result of
replacing an old mechanical system.
State-of-the-art electronic sensors
and controls make for almost
instantaneous response rates.
What does it all mean? Simple –
quicker system response times,
higher ground speeds, and more
cotton in the basket at the end of
every row.
55/65-watt low-beam
Maximize your harvest. Minimize yo ur effort.
Row-Trak™ Guidance
25
The Row-Trak Guidance System
keeps your attention on harvesting
cotton, rather than steering the
machine. Operators stay more
alert and more relaxed, with less
stress and fatigue.
This simple, reliable system
pays off with more cotton in the
basket and higher efficiency from
machine and operator.
Electronic height sensing lets you
adjust header height and response rate
on the go, from the cab. You’ll harvest
bolls other machines might miss.
To activate Row-Trak guidance, just line up
with the rows, then hit the switch on the hydro
handle. Row-Trak takes over, steering the
stripper and keeping it on-row.
Gone are the levers.
Gone are the linkages.
Cat-like reflexes are just
one of the benefits of
the electronic controls
on the 7460. Raising
and lowering the units
are now done at the
touch of a button.
Convenient rocker switches calibrate and
turn on the Row-Trak system. A switch on the
hydro handle engages it.
The wishbone rod assembly runs along
each side of the row. A center pivot
allows side-to-side movement as it
follows the row, activating an electronic
sensor that sends a signal to the
controller.
Pack more cotton in the basket. And unload it faster.
If you’re not on the row, you’re losing
valuable harvesting time. So we
designed the cotton handling system
on the 7460 Stripper to help you
minimize the number of dumps
required, unload faster, and get back
to the field as quickly as possible.
Start with the basket augers. The
large flighting, big, hungry augers and
second drive motor allow you to pack
more cotton into the basket.
Dump cycle times are fast, too –
even with the added cotton that the
7460 is able to pack into the basket.
And to help minimize basket
jarring from the faster unload cycle,
the cushioning system helps slow the
basket as the hydraulic cylinders
reach the end of their stroke.
It all works together to help speed
the unload cycle by up to 25 percent
over our previous stripper models.
You’ll spend more time on the row,
and less time with the module
builder or boll buggy.
55/65-watt low-beam
Strong but gentle. The cushioning
system on the 7460 slows the
movement of the basket as it nears
the end of the cylinder stroke to
help prevent jarring from the faster
unload cycle.
The lighting and mirror package,
featuring HID lights, puts more
hours in your harvest day with six
additional lights. It also includes
mirror extensions and two
additional mirrors to increase
visibility to the sides and rear.
Bigger is better. The basket augers on the
7460 are 25 percent larger in diameter than
augers on our previous model Plus, dual
auger drives give each auger more packing
power. So more cotton goes into the basket
and you spend more time harvesting with
less time unloading.
Exclusive doffer design
uses longer brushes,
relocated brush
protectors, and easy-off
brush mounts
for increased life and less
maintenance hassle.
We all like green – but not green
bolls in your cotton. That’s why the
7460 features a separator inside
the air duct to help separate out
the green bolls and rocks. You run
at higher field speed, with less
plugging, and significantly fewer
green bolls.
You get more cleaning capacity
from the wide finger grates and
high 630 RPM top saw speed.
Also, sensors for top saw speed,
trash auger speed, and feeder
shaft speed help you detect plugs
and avoid trouble.
The 12-brush doffer design
improves doffing performance. The
7460 also features a doffer slip
clutch for increased belt and pulley
life, and a spring-loaded idler to
help maintain the correct cleaner
belt tension.
And at the lower saw cleaner,
a reclamation brush grabs cotton
before it falls out of the cleaner, so
you get more in the basket and
less on the ground.
Grab that stray cotton with our
new lower-saw reclamation
brush. Cotton is caught by the
lower saw before it reaches the
burr trail, so you get more in the
basket and less left in the row.
27
28 John Deere Pro-Series Units
No matter what row spacing you’re
planting now (or might be planting
in the future), you’ll be ready for just
about anything with the PRO-Series
Row Units. With a wide variety of
available row-spacing configurations,
you get unmatched cotton picking
flexibility.
Start with the patented
John Deere roller and crank system
… changing unit spacing is an
easy, one-person job, and makes
maintenance and service easier and
more convenient.
If a lack of suitable harvesting
equipment has kept you from
planting 15-inch rows, you’ll
appreciate the new PRO-12
VRS System … these spindle-pick
units adjust easily from 15 to
40 inches.
Wide or narrow, skip or
solid … no other manufacturer offers
as many picking configurations – or
pickers – as John Deere.
PRO-Series Row Units give you a top-quality harvest.
Nothing picks a field of highyielding cotton faster or
cleaner than inline PRO-16
row units. With 20-spindlehigh, and 16-bar front and 12bar rear drums, a 4-mph firstgear picking speed opens up a
whole new level of cottonharvesting productivity.
A heavy-duty gearcase features large
gears and bearings for extra durability.
The units are lubricated with hydraulic
oil, rather than cornhead grease, so
they’re easier to fill. A high-speed rear
drum gear increases rear drum spindle
speed, improving picking efficiency.
John Deere Pro-Series Units 29
PRO-XL™ spindles were specially
engineered with John Deere’s PROSERIES cotton pickers in mind. They
provide superior performance in harsh
picking conditions and deliver a long
wear life.
John Deere PRO-12
VRS Picking Units:
How They Work
We added an inline cutting unit to the
standard right-side picking unit. As the
plant enters the cutting unit, rotary knives
cut the stems. The feeder, synchronized
with forward picking speed, holds the cut
plant upright and gently passes it into the
standing row as it enters the front picking
zone. Crop passes through the front picking
zone, and is then fed to the rear drum for
harvesting of any remaining open bolls.
Sight glasses
on each row
unit make it
easy to ensure
proper oil level.
Electronic height sensing (standard on
the 9996 and the 7760) lets you adjust
both height and sensitivity on-the-go from
the comfort of your cab. You can pick more
low-hanging bolls because row-unit height
automatically adjusts to the terrain. In fact,
the units can be adjusted to run virtually
flat to pick bolls other machines would
leave behind.
Adjusting the unit spacing on a John Deere
picker is a fast, easy, one-person job. Simply pull
a pin and crank the unit into place. And with the
narrow profile of the PRO-SERIES inline row units,
you have plenty of elbow room for accessing the
doffers and moistener pads for cleanout.
30 Documentation and Guidance
Get accurate yield maps with
Harvest Doc Cotton. The ability
to collect map-based yield
information can help you make the
most of expensive chemical inputs.
Until now, however, the lack of an
accurate yield monitoring system
prevented precision technology
from being widely used in cotton.
But with the introduction of Harvest
Doc Cotton, you now have an
accurate, easy-to-use system to
document cotton yields.
Harvest Doc Cotton allows
you to record yield information
as the picker moves through the
field. At the end of the day, you
can download data into Apex to
generate a variety of reports and
maps. Use the data to help make
better management decisions and
increase your efficiency.
GreenStar 2: One powerful package.
Harvest Doc™ Cotton
31
Row-Trak Guidance
Harvest Doc Cotton is John Deere’s first yield
mapping system for this globally important crop.
As with other high-yielding crops, the ability to
collect harvest information is nearly as important as
the crop itself. With Harvest Doc Cotton, you can
document cotton yields with your GreenStar system
and your John Deere 9986 and 9996 Cotton Pickers.
Using Harvest Doc as the foundation, Harvest
Doc Cotton enables you to generate detailed cotton
yield maps that can help you make the best informed
management decisions possible. Harvest Doc Cotton
uses the GreenStar components in the machine.
Once the data is collected you can use Apex
software to generate detailed reports and maps of
the captured yield data. Talk with your John Deere
dealer for more details.
GreenStar 2 System
55/65-watt low-beam
Nobody gives you precision options like John Deere.
Our portfolio of Ag Management Solutions puts the
power of GPS-based mapping and documentation into
one easy-to-use package. The heart of the system is
the GS2 2600 Monitor, our full-color, reconfigurable
touchscreen display. Up top, the StarFire iTC receiver
automatically compensates for sloping ground, so you
always get accurate readings. Best of all, the entire
system can be easily transferred to your GreenStarready combine, tractor, or sprayer.
You can imagine how difficult it can be to stay on-row in this
bushy, heavy-yielding irrigated cotton. It’s just one of many
conditions where Row-Trak guidance can make a tremendous difference
in your productivity. Simply line up with the rows, then activate the
guidance system with a switch on the hydro handle. It’s that easy.
32 Service and Maintenance
John Deere cotton harvesters: easy to use, easy to maintain.
33
Trust Genuine John Deere parts
Whether you’re talking daily
maintenance, routine service,
or emergency repairs, you’ll
appreciate doing business with
John Deere and your cotton
country John Deere dealer.
To start, we made daily
items quick and convenient.
Remote tethers control rowunit lubrication, while quick-fill
connections allow fast filling of
the water tank and on-board
lube system.
When it’s time for larger
service or repair items, nobody
responds like your John Deere
dealer. With a complete inventory
of replacement parts, as well as
trained technicians, your John
Deere dealer can get you back on
the row with minimal disruption to
your harvest.
Wide cab platform. The cab design features a large access platform that makes
it easy to inspect ducts or perform routine daily maintenance. Thanks to the new
duct support structure, getting in and out of the cab is a breeze. A water-filled
fire extinguisher is mounted at the deck of the platform; a second ABC-type
extinguisher is located at the rear of the machine.
Quik-Fill™
speeds refills.
A standard
Quik-Fill lets
you refill the
moistener system
much faster to
get back on row
sooner.
A unique PROSERIES camtrack design
gives you much
easier access to
the cam rollers.
The inline unit’s narrow
profile with swing-out
moistener columns allows
faster, easier service.
Inspecting the nozzles
is easier, too.
Solution strainer. Because you
check it every day, we located the
solution strainer at the forefront,
where it’s easy to reach. Just
another small example of how
John Deere builds machines with
your convenience in mind.
Quick remote lube fill. The hydro
module cover provides easy access to
the remote lube fill. There’s enough
grease capacity to keep a 6-row
machine lubed for a week.
Easy-access fuses. Automotive-type
fuses are located behind the training
seat; easy to reach, easy to change.
From our PRO-XL spindles to our
specially formulated lubes to highquality air and oil filters, your
John Deere dealer offers the most
complete line of maintenance
and replacement parts for your
John Deere cotton harvester.
34 Specifications
7760
Engine..............................John Deere PowerTech Plus™
Horsepower..................................................................500
Power Boost..................................................................Yes
Displacement.............................................................13.5L
Cylinders............................................................................6
Turbocharged/Aftercooled............................................Yes
Alternator.............................................................200 Amp
Cooling System................................................................-- Rotary Screen................................................................Yes
Ground Level Access to Coolers...................................Yes
Fuel System......................................................................-- Type.............................................................Direct injection
Governor............................................................. Electronic
On Board Diagnostics...................................................Yes
Transmission............ProDrive™ automatic-shift (AST)
Gears......................................................................4-speed
Unit Configuration............................PRO-16, PRO-12 VRS
1st gear (speeds in mph) (2WD).................................N/A
2nd gear (2WD)............................................................N/A
3rd gear (2WD)............................................................N/A
1st gear (4WD)..................................................0-4.2 mph
2nd gear (4WD)....................................................0-5 mph
3rd gear (4WD).....................................................0-9 mph
4th gear (4WD)...................................................0-17 mph
Hydrostatic System.........................................................-- Type..............................................................................Dual
Brakes................................................................................-- Type.............................................................Multi-disk, wet
Tires....................................................................................-- Standard Drive Tire............520/85R42 R1 (20.8R42 R1)
Optional Drive Tires...........520/85R42 R2 (20.8R42 R2)
Dual Wheels...................................................................Yes
Dual Tire Size (Standard)...520/85R42 R1 (20.8R42 R1)
Dual Tire Size (Optional)...520/85R42 R2 (20.8R42 R2)
Standard Steering Tire.......520/85R34 R1 (20.8R34 R1)
Optional Steering Tire.......520/85R34 R2 (20.8R34 R2)
Rear Wheel Drive........................................................... Yes
Tire Size..............................520/85R34 R1 (20.8R34 R1)
Capacity.............................................................................-- Intermediate Height........................................................-- Full Height.......................................................................-- Full Height with Extension.............................................-- Dump Height.....................................................................-- Type.................................................................................-- Height..............................................................................-- Conveyor............................................................................-- Type.................................................................................-- Compaction.......................................................................-- Type.................................................................................---
7760, 9996, 9970 Cotton Pickers and 7460 Stripper
On-Board Module Builder.......................................................
Module Shape...........................................Round/Cylindrical
Module Dimensions....Up to 90-in. diameter X 96-in. wide
Module Weight..............................................4500-5000 lbs.
Unload on-the-go..............................................................yes
Wrap system carrying capacity.........................100 portions
Row Units...................................................................................
Number of Rows...............................................................6
Spacings...........................................15-in. and 30-40-in.
Picking Units.....................................................................-- Style.......................................................................... In-line
Units Available............................. PRO-16 or PRO-12 VRS
Drums................................................................................2
Bars Front and Rear16-12 (PRO-16), 12-12 (PRO-12 VRS)
Spindles per Bar..............20 (PRO-16), 18 (PRO-12 VRS)
Doffer Pads...........................................................Urethane
Moistener Pads.....................................................Urethane
Unit Drive Protection......................................... Slip clutch
Unit Movement........................................Crank and Roller
Lubrication........................................................................-- Bars......................................................................On-board
Upper Gears......................................................... Standard
Row Guidance..........................................................Standard
Tank Capacities (US Gallons).................................................
Fuel Tank..........................................................................300
Moistener System............................................................-- Quick Fill.............................................................. Standard
Lube....................................................................................--Hydraulic System......................................................................
Pump Type........................................Pressure compensated
Pressure................................................................3000 psi
Flow.........................................................................54 gpm
Dimensions................................................................................
Lengths..............................................................................-- Overall Length....440-in. (operating); 470-in. (transport)
Wheel Base..............................................................170-in.
Heights...............................................................................-- Transport Position...................................................170-in.
Transport Position with Extension...............................N/A
Intermediate Position...................................................N/A
Full Height Position..................................................210-in.
Full Height Position with Extension.............................N/A
Weights..............................................................................-- 4-Row...........................................................................N/A
5-Row...........................................................................N/A
6-Row................................................................67677 lbs.
Design and specifications subject to change without notice.
9996
Engine.......................................................................“6 cylinder
8.1 L (497 cu. in.) turbocharged,
air-to-air aftercooled diesel
350 hp (261 kW)”
capacities...................................................................................
cotton basket w/ standard basket lid extension1400 cu.
ft. (39.6m3)
fuel tank............................................................200 gal (757 L)
water solution tank.......................................345 gal (1306 L)
lubrication system.............................................80 gal (303 L)
cooling system.......................................................44 qt (42 L)
engine crankcase..................................................31 qt (29 L)
hydraulic/hydrostatic reservoir........................18 gal (66 L)
hydraulic system..............................................“closed-center
pressure-compensated
standby pressure of 2700 psi (18617 kPa)”
onboard unit-lubrication system...........................................
tether control....single button for spindle, bar, cam, and gear
lubrication
pump.........................................hydrauically driven gear pump
cotton conveying...Jet-Air-Trol system with Jet_post nozzle
and common air duct for single suction doors
tires.............................................................................................
drive wheels....................................20.8-42 14PR (R1 or R2)
Drive wheels, duals...........................................“20.8 X 42 in.
14PR R1 or R2 cleat”
standard guide tires.................................14.9-24, 12PR (R2)
cleated guide tires, optional......................480/65 R24 R1W
power rear axle.........................................................................
(82-90 in. tread)........................................14.9-24, 12PR (R2)
2-wheel drive.............................................................................
1st gear............................................. 0-4 mph (0-6.4 km/h)
2nd gear.........................................0-4.9 mph (0-7.9 km/h)
3rd gear......................................... 0-17 mph (0-27.4 km/h)
4-wheel drive (high range).....................................................
1st gear.............................................. 0-3.5 mph (5.6 km/h)
2nd gear............................................0-4.3 mph (6.9 km/h)
3rd gear......................................... 0-14.8 mph (23.8 km/h)
4-wheel drive (low range)......................................................
1st gear..............................................0-3 mph (0-4.8 km/h)
2nd gear............................................0-3.7 mph (0-6 km/h)
3rd gear......................................... 0-12.8 mph (20.6 km/h)
Picking units...................................................................................
PRO-16.................... “20 spindles high with 16-bar front and
12-bar rear drums (560 spindles per unit)
Electronic Row-Unit Height Control”
PRO-12...................“18 spindles high with two 12-bar drums
(432 spindles per unit)
PRO-12 VRS...........“18 spindles high with two 12-bar drums
(432 spindles per unit)
transportation width................................................................
4-row, 30-in...................................................150 in. (3810 mm)
4-row, 40-in...................................................173 in. (4394 mm)
6-row, 30-in...................................................218 in. (5537 mm)
6-row, 40-in..................................................236 in. (6000 mm)
transport height........................................................................
basket down (with lid extension)................170 in (4267 mm)
Weight.........................................................................................
4-row, 30-in............................................... 36000 lb (16329 kg)
4-row, 36, 38, or 40-in..............................35750 lb (16216 kg)
6-row, 30-in, PRO-12 units........................41625 lb (18881 kg)
6-row, 30-in, 32-in, PRO-16 units............ 43000 lb (19504 kg)
6-row, 36-in, 38-in, 40-in, PRO 16 units43000 lb (19504 kg)
6/12 row, 30-in, PRO-12 VRS units..........43630 lb (19790 kg)
9970
Engine...............250 hp (187 kW), 6-cylinder, 6.8 L (414 cu. in.)
turbocharged, charge air cooled, diesel
Slow idle speed................................................800 to 900 rpm
Rated (under field conditions)...................................2200 rpm
Fast idle speed (no load)...........................................2350 rpm
Fuel System:...................................................................................
Type....................................................................Direct injection
Injection pump type.........................................................In-line
Air System:.....................................................................................
Air cleaner........Dry-type with safety element and aspirated precleaner
Cooling System:.............................................................................
Type.................Single pressure with gear-driven water pump
Temperature control..................Dual, heavy-duty 180 degree
thermostats
Electrical System:..........................................................................
Type.....................................................12-volt negative ground
Brakes:.............................................................................................
Type............................Hydraulically actuated shoe-type drum
Hydraulic System:.........................................................................
Type.....................................Closed-center, constant pressure
Standby pressure....2490 to 2590 psi (17170 to 17860 kPa)
Operator’s Station:........................................................................
Type.................Sound-Gard styled cab (no ROPS), heater, air
conditioner, AM/FM radio with CD and weatherband,
windshield wiper, rear view mirror, deluxe seat suspension
and Personal Posture seat with seat belt
On-Board Unit Lubrication System:...........................................
Cab or tether control....Single button for spindle, bar, cam and
gear lubrication
Pump.................................................Hydraulic driven gear pump.
Transfer pump....Transfer pump is available to fill reservoir - fill
time for the 67 U.S. gal. reservoir is approx. 10 minutes. The
hydraulic couplers to drive the transfer pump are standard
equipment.
Cotton Conveying System............................Jet-Air-Trol system
with Jet-Post nozzle
Ground Speeds (full throttle):................................................
2-Wheel Drive:..................................................................................
Picking speeds–..........................................................................
1st gear........................................0 to 3.8 mph (0 to 6.1 km/h)
2nd gear......................................0 to 4.5 mph (0 to 7.2 km/h)
Transport speeds–......................................................................
3rd gear.................................. 0 to 15.6 mph (0 to 25.1 km/h)
Reverse....................................0 to 10.7 mph (0 to 17.2 km/h)
4-Wheel Drive:.................................................................................
Picking speeds–..........................................................................
1st gear....................................... 0 to 2.9 mph (0 to 4.7 km/h)
2nd gear.....................................0 to 3.5 mph (0 to 5.6 km/h)
Transport speeds–..................................................................
3rd gear................................0 to 9.0 mph (0 to 14.5 km/h)
Reverse...................................0 to 5.0 mph (0 to 8.0 km/h)
Capacities:..................................................................................
Cotton basket:.........................................................................
Intermediate height...........................1065 cu. ft. (28.8 m3)
Full height............................................1173 cu. ft. (32.8m3)
Fuel tank...............................................120 U.S. gal. (454 L)
Water solution tank........................ 275 U.S. gal. (1040.8 L)
Lubrication system.................................67 U.S. gal. (227 L)
Cooling system...........................................44 U.S. qt. (42 L)
Engine crankcase (includes filter)...... 33.3 U.S. qt. (31.5 L)
Hydraulic/hydrostatic reservoir...........11.3 U.S.gal. (42.7 L)
Transmission............................................... 8 U.S. qt. (7.6 L)
Final drive..................................................8.2 U.S. qt. (7.8L)
Tires:............................................................................................
Front drive wheels..............520/85D38 (R1) Standard, (R2
optional)
Standard guide wheel“14.9-24 8PR (R4) Standard, (14.924 12PR R2 optional)
(9.00-24 8PR I1 optional)”
Powered rear axle . ...............................14.9-24 12 PR (R2)
PRO-12™ Picking Units:.........................................................
Row configurations..Available in 4 or 5-row configurations
(see Picking Unit Ordering Guide for row spacings)
Two 12-bar drums per unit, high-strength aluminum bars..
Standard equipment
18 spindles per bar (432 spindles per unit)...........................
Standard equipment
Stalklifter extensions and tunnel grates...............................
Optional guide rods and scrapping plates”
Automatic row-unit height control...... Standard equipment
Transport Width:........................................................................
4-Row, 30-, 32-, 34-, 36-in................. 150-in. (3810 mm)
4-Row, 36-, 38-, 40-in.........................173-in. (4394 mm)
4-Row, 60-in. skip................................173-in. (4394 mm)
4-Row, 64-in. skip................................ 186-in. (4750 mm)
5-Row, 30- or 32-in..............................173-in. (4394 mm)
5-Row, 34- or 36-in...............................187-in. (4750 mm)
Transport Height:.......................................................................
Basket down..........................................148-in. (3759 mm)
Intermediate position............................. 178-in. (4521 mm)
Full-up position......................................190-in. (4824 mm)
Weight: (In-Line Units)...............................................................
4-Row, 30-in......................................29050 lb. (13177 kg)
4-Row, 40-in......................................29050 lb. (13177 kg)
5-Row, 30-in......................................32000 lb. (14057 kg)
7460
Engine.............................................................................................
Manufacturer . ...................................................... John Deere
Model ....................................................6068T Turbocharged
No. of Cylinders ......................................................................6
Displacement . .............................................. 6.8L (414 cu in.)
Rated Power (@ 2200 rpm, no fan) ...........129 kW (173 hp)
Engine Speeds...............................................................................
Fast Idle (No Load).................................... 2360—2400 rpm
Rated (Under Field Load) ........................................2275 rpm
Slow Idle ...........................................................930 ± 30 rpm
Fuel System...................................................................................
Type .................................................................Direct Injection
Fuel Filters ......................Primary Water Separator and Final
Engine Air System........................................................................
Air Cleaner ..Dry-Type with Safety Element and Dump Valve
Capacities.......................................................................................
Cotton Basket . ....................................22.88 m3 (808 cu. ft)
Fuel Tank.................................................. 454L (120 U.S. gal)
Cooling System........................................... 33.1L (35 U.S. qt)
Engine Crankcase (Includes Filter) . .............20L (21 U.S. qt)
Hydraulic/Hydrostatic Reservoir . ................68L (18 U.S. gal)
Hydraulic/Hydrostatic System . ...............79.5L (21 U.S. gal)
Transmission 13.6L . ..........................................(14.4 U.S. qt)
Final Drive (each) ........................................... 1.9L (2 U.S. qt)
Cleaner Gear Case ............................................1 L (1 U.S. qt)
Weight (4-Row).............................................................17,000 lb.
Number of Units . ......................................................4, 5, 6 or 8
Number of Rolls............................... 8, 10, 12 or 16(2 per unit)
Roll Type . ................................. Alternate brush and rubber flap
Brush Diameter . .................................................152 mm (6 In.)
Roll Length . .................................................... 1016 mm (40 In.)
Unit Auger Diameter .................................... 146 mm (5.75 In.)
Cross Auger Diameter .....................................305 mm (12 In.)
Stripping Unit Controls ..Electronic, adjustable response rate,
individual row height control and individual raise/lower
Cleaner Speeds (Engine at rated 2275 rpm)...............................
Top Saw .....................................................................630 rpm
Doffer ....................................................................... 1310 rpm
Bottom Saw............................................................... 550 rpm
Forward Ground Speeds (Full Throttle)......................................
1st Gear................................... 0—5.95 km/h (0—3.7 mph)
2nd Gear ...............................0—14.09 km/h (0—8.8 mph)
3rd Gear . ..............................0—29.6 km/h (0—18.4 mph)
Reverse Ground Speeds (Full Throttle).......................................
1st Gear..................................... 0—2.9 km/h (0—1.8 mph)
2nd Gear ................................... 0—7.8 km/h (0—4.4 mph)
3rd Gear . ................................0—14.8 km/h (0—9.2 mph)
35
Tires................................................................................................
Front Drive Wheels.......................................... 23.1–26 14PR
Rear Guide Wheels . .........9.00 x 24 8PR Ribbed (Standard)
Rear Guide Wheels . ..........14.9 x 24 8PR Cleated (Optional)
Brakes............................................................................................
Type .................................Hydraulically-Actuated Shoe-Type
Hydraulic System.........................................................................
Type .................................Closed-Center, Constant Pressure
Stand-By Pressure 2490—2590 psi (17,170—17,860 kPa
Oil Filter ........................................Spin-On, Full Flow Suction
Oil Cooler ................................................................Air-Cooled
Machine Weight.......................................7945 kg (17,000 lb)

Fast and easy credit

Transcription

Similar documents

Cotton Traders case study

Camp Shirts - Wolfmarkties

The Cotton Wrap - The February 2016 Edition

at THE SCHAGHTICOKE FAIRGROUNDS

1-800-INNOMAX ULTRA-PEDIC™ FEATURES AND BENEFITS

John Deere tractor

john deere 9970-9976

Stayfast - Haartz Corporation