- NZ Safety Online Catalogue

Transcription

- NZ Safety Online Catalogue
Make sure you
regularly conduct
site surveys to
identify hazards
and minimise risks
to people and
equipment.
WORKPLACE SAFETY
Every
New Zealand
workplace has
site specific
hazards.
Don’t gamble with safety.
153
ROAD/CARPARK/WORKSITE SAFETY
900MM SLIM BODY
ROAD CONES
• 4.5kg, NZTA compliant
• Also available in 6.3kg
option – to remove
need for double
stacking
• NZ-manufactured,
recycled materials
used in cone base
• Bases can be branded,
and screen printing is
also offered
(at extra cost)
CODE 409902 4.5kg
900MM WIDE BODY
ROAD CONES
900MM WIDE BODY
ROAD CONES –
BRANDED
• NZTA compliant
• Also available in 6.0kg
option – to remove
need for double
stacking
• 5.0kg, NZTA compliant
•B
randing in black, area
available 180mm x 70mm
• Minimum quantity for
branding: 20
CODE 4
01906 5.0kg
403372 6.0kg
CODE 4
01931 20-49 cones
401932 50 + cones
WORKPLACE SAFETY
900MM
COLLAPSIBLE
PORTACONE
• Two reflective collars,
NZTA compliant
• To improve personal
safety during tyre changes,
breakdowns etc
• Rubber base for
increased durability
and stability
• Comes with battery
powered LED
flashing light
• Collapsed height: 50mm
CODE 401689
450MM & 700MM ROAD CONES
• Available with single reflective collar or
no collar
• Ideal for marking off zones at sports events,
or hazardous work areas etc
CODE 4
01907 450mm, no collar
401933 450mm, with collar
401934 700mm, no collar
401935 700mm, with collar
CONE BARRIER
• Fits over any standard road cone
• Expandable to 2m (cones not included)
CODE 402849
COLLAPSIBLE
PORTACONES –
OTHER SIZES
• Single reflective collar
• Ideal for marking off
zones at sports events,
or hazardous work
areas etc
• Plastic bases, except
500mm which has
rubber base
• Comes with battery
powered LED
flashing light
• Collapsed height: 50mm
CONE
SIGN STAND
• Fits to any standard
road cone
• Holds a standard
380mmx280mm
safety sign
• Sign and cone not
included
CODE 4
01367 500mm
401368 600mm
401369 700mm
CODE 400465
ROAD SAFETY BEACON
• Photosensitive – light activated by darkness
• Polycarbonate lens
• Takes 2 6v batteries
CODE 116424
GO TO PAGE
227
ROAD SIGNAGE
RG-1 & RG-2 SPEED CIRCLE
SIGN STAND – TEMPORARY WARNING
• Double sided, 3.5mm zinc plated steel
• Locking system allows signs to be secured
CODE 4
01899 Stand & base - complete
401897 Upright
401898 Base
402398 Ground spike
154
RG-4 TEMPORARY SIGN
• Size 900mmx300mm
CODE 401829
• Single sided, but available double sided
on request
• Other speeds available on request
• Size 750mmx750mm
CODE 4
01825 30
401826 50
401827 70
401828 100
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
ROAD/CARPARK/WORKSITE SAFETY
SKIPPER SAFETY CORDON
Very versatile safety
solutions
SKIPPER UNIT
• Skipper unit (holding 9m tape) attaches to
the Skipper Post top
• Post height – including base – 1.0m
• Two reflective bands for better visibility
• For outdoor stability the base can be
spiked to the ground
• For indoor stability the base can be filled
with water or sand
CODE 411314
• Unit contains 9m of hi vis retractable tape
• Unit height – 240mm
• Simply extend as much tape as required
and attach end-clip to one of the
alternative Skipper Receiver fittings
• The tape end-clip allows tape to wrap
around an object and connect to itself
• Locking button prevents unwanted
spooling in windy conditions
• S ystem can attach to walls,
vehicles/plant, or to the versatile
purpose-designed Skipper Post
• S ystem will also fit on top of most
conventional road cones
CODE 4
11315 Black/Yellow
411316 Red/White
411317 Blue/White
•O
ptional accessories include a
rechargeable LED light, and an
A4-sized sign holder
• S ystem is quick and easy to put
in place
•A
pplications: construction, traffic
control, warehousing, facilities
management etc
SKIPPER UNIT SUPPORT BRACKET
• Wall-fix bracket to hold the Skipper Unit
• Includes locking clip for secure attachment
CODE 411318 Wall-fix
SKIPPER WALL &
MAGNETIC RECEIVER
• Unit receives the barrier tape end-clip
• Available in wall-fix or magnetic options
WORKPLACE SAFETY
SKIPPER POST & BASE
•C
lever hi vis tape system to
effectively cordon off outdoor &
indoor areas
CODE 4
11319 Wall-fix
411320 Magnetic
SKIPPER DUMMY UNIT RECEIVER
SKIPPER LED LIGHT
• Attaches to Skipper Unit
• Rechargeable; with continuous light or
flash capability
• Light sensor for auto-activation; can be
turned off
SKIPPER A4 SIGN HOLDER
• To carry warnings, messages and promotion
• Polycarbonate U-shaped frame allows easy
sign attachment/removal
• This is a Skipper Unit without tape –
to receive barrier tape end-clip
• Can be fitted to Skipper Post or Skipper
Support Bracket
• System will also fit on top of most
conventional road cones
CODE 411322
CODE 411323
CODE 411321
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
155
ROAD/CARPARK/WORKSITE SAFETY
SOLARBRIGHT
MARKERS/STUDS
PATEYE SOLAR
ICE WARNING MARKER
PATeye ice detection
marker
• Innovative solar-powered product,
created in NZ.
WORKPLACE SAFETY
• Performance-proven in
low-temperature northern
hemisphere environments
• Ideal for carparks, walkways,
industrial sites and foot traffic areas
like airports, schools etc
• PATeye’s proprietary sensors predict
the presence of ice through the
analysis of frost formation on its surface
• When triggered, PATeye will flash
a blue warning light at 2 Hertz,
twice per second
• When ice is detected, light flashes blue as
warning
• Reduces risk of slips and falls around work
sites and business premises
• Ideal for walkways, steps, car parks, general
access areas etc
• Alloy construction, 132mmx122mmx20mm
• Eight hour charge provides over 300 hours
of continuous operation
CODE 409840
T TOP DELINEATOR
• Two highly reflective
collars, 1100mm height
•6
kg base, suitable for
sectioning-off work areas
• Can be used with
barrier tape or rope
CODE 403240
SOLAR WALKWAY LIGHTING STUD
• For walkway/roadway delineation
• Range of lighting colours available
• Default mode is constant light, but flashing
options available
• Alloy construction 132mmx122mmx25mm
• Visible from 800M
• Eight hour charge provides over 100 hours
of continuous LED light
CODE 409687
FLAGS ON ROPE
• Cost-effective visual warning system
• 30m length, triangular fluoro orange flags
CODE 403893
116556
116603
116645
116513
116522
116602
116631
116647
116653
116599
116521
116521
116637
116629
400075
116548
500766
116572
WARNING TAPES
Warn against hazards or dangerous work
areas. This non-adhesive, durable tape
comes in easy-to-use rolls so it can be put up
quickly and can be reused once the hazards
is removed. L 300m x W 100mm.
• Custom printed and company branded
tapes are also available
• Standard sign codes are shown
below each image
SPEED HUMP
LED TRAFFIC WAND
• Strobe flash or continuous light option
• Highly visible at night and in low light
• Uses 2 x D type batteries
CODE 105732
156
• Traffic calming system
• Built-in reflectors
• 500mm modular sections, 200mm end caps
– both black or yellow
• Easy to install, fasteners included
CODE 4
05897 Module
405896 End cap
WHEEL STOP
• Lightweight rubber stop, easy to install
• Complies with standard AS/NZS 2890.1:2004
• Yellow hi vis reflectors; non slip grippers
• Length: 1650mm; Height: 100mm
• Fasteners sold separately
CODE 4
05898 Wheel Stop
405899 Concrete fastener (pk of 3)
405900 Bitumen fastener (pk of 3)
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
ROAD/CARPARK/WORKSITE SAFETY
SAFETY FENCE
CODE 407824
CODE 407823
CODE 403894
CODE 116246
CODE 116297
EXPANDABLE BARRIER
• All materials light, strong and non-corrosive
• Aluminium cross members with stainless steel end supports
• Available as free standing or for wall mounting; temporary or permanent
• Supplied with wall brackets and lockable drop lock fitting
• Standard sizes shown in table, but other sizes and colours on request
CODE
HEIGHT
NO. OF
BARS
STORAGE DIMENSIONS
H x W (mm)
EXPANDED
DIMENSIONS
H x W (mm)
113615
1m
10
1000 x 380mm
950 x 4000mm
113618
1m
12
1000 x 420mm
950 x 5000mm
113621
1.5m
13
1500 x 480mm
1450 x 4000mm
113624
1.5m
15
1500 x 530mm
1450 x 5000mm
406311
2m
12
2000 x 510mm
1950 x 4000mm
406312
2m
14
2000 x 560mm
1950 x 5000mm
EZISET BARRICADE
• Lightweight polyethylene construction,
interlockable, UV-resistant
• Reflective tape, NZTA compliant
• Can be weighted with water or sand
• 1.2m H x 2.4m W, weight 15kg
WORKPLACE SAFETY
CODE 1
16297 Safeguard mesh 1m x 30m
116246 Visible mesh 0.9m x 30m
403894 Stockade lightweight mesh 1m x 50m
407823 Steel Y post 1500mm bundle of 10
407824 Y post safety cap, Yellow, pack of 20
CODE 403277
CABLE PROTECTOR
• For protection of cables and hoses –
both outdoors and indoors
• Interlocking module design;
suitable for vehicles up to 5 tonne
(not suitable for forklifts)
• Flip top access to 71mm x 56mm
internal channel
• Module dimension: 600mm W x 75mm H
x 0.9m L
CODE 405901
SIDEWINDER CABLE PROTECTOR
• Design allows flexibility in placement
• Tough ABS modules simply snap together
• Packed in box containing 1.0M length
CODE 4
10469 Blk/Yell, Small: 76mm W x 19mm H
410475 Blk/Yell, Medium: 248mm W x 35mm H
410476 Blk/Yell, Large: 346mm W x 54mm H
410477 Blk, Small: 76mm W x 19mm H
410478 Grey, Small: 76mm W x 19mm H
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
157
CARPARK/WORKSITE SAFETY
TRU-GARD BARRIER SYSTEM
• Building and Personnel protection against
mobile plant
• Barrier dimensions: 2400mm L, 295mm W,
fastening at 1100mm c/s
• Supports: Single 310mm H;
Double 610mm H; Triple 910mm H
• All fasteners included
WORKPLACE SAFETY
CODE 5
00639 Barrier
500643 Single Support
500642 Double Support
410853 Triple Support
500640 End Cap
500641 External Corner
410854 Internal Corner
TRU-RAIL HAND RAIL SYSTEM
• Guides staff away from hazards
• Stand alone modular system or
incorporated within Tru-Gard Barrier
• Coated aluminium; dimensions:
2200mm L, 1000mm H
• All fasteners included
CODE 4
09940 Personnel Gate
409938 Personnel Frame
409939 Extension Kit
TRU-GARD BOLLARDS
• For internal use (we can
source galvanised for
external use)
• Bollard dimensions: 1100mm H;
Standard 115mm dia;
Large 165mm dia
• All fasteners included
CODE 5
00645 Standard
500644 Large
158
PLASTIC EXPANDING BARRIER
PLASTIC EXPANDING BARRIER WHEELED
• Temporary barrier, straight line
• Ends can be water or sand filled
• Dimensions: 900mm H, 2200mm L
(extended)
• Temporary hazard protection
• Flexible around corners
• Dimensions: 920mm H x 4100mm L
(expanded)
CODE 409943
CODE 409942
KNUFFI BUMP GUARD
KNUFFI BUMP GUARD
• Large square corner protection
(other profiles available)
• Indoor/outdoor; temp range -40°C to 100°C
• Simple push-fit install, adhesive backing
• 1000mm length
• Large round corner protection
(other profiles available)
• Indoor/outdoor; temp range -40°C to 100°C
• Simple push-fit install, adhesive backing
• 1000mm length
CODE 407816
CODE 407815
KNUFFI BUMP GUARD
• Edge protection (other profiles available)
• Indoor/outdoor; temp range -40°C to 100°C
• Simple push-fit install, adhesive backing
• 1000mm length
CODE 407814
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
FLOOR/WALKWAY SAFETY
SPRAYWELL UPSIDE DOWN MARKER
KRYLON QUIK MARK UPSIDE DOWN
MARKER-WATER BASED
Water-based semi permanent marker; bold,
clear single-pass markings, UV-resistant; lasts
12+ weeks, can be scrubbed off; suitable
for asphalt, gravel, dirt, grass; 600ml cans.
Colours: Fluoro Blue, Fluoro Orange, Fluoro
Pink, Fluoro Purple, Fluoro Green, Red, White,
Yellow, Black, Silver.
CODE 411094
CODE 500386
KRYLON QUIK MARK UPSIDE DOWN
MARKER-CHALK BASED
Chalk-based temporary marker; bold, clear,
single-pass markings; lasts 3-4 weeks, scrubs off
with water and stiff brush; suitable for asphalt,
gravel, dirt, grass; 600ml cans. Colours: Blue,
Orange, White, Yellow, Red, Green.
CODE 411096
SPRAYWELL PAINT
SPRAYWELL DAY &
NIGHT GLOW MARKER
SPRAYWELL HIGHWAY LINE MARKER
Better visibility of safety hazards in low light or
dark situations. High grade pigment absorbs
light during the day (or from lighting), then
provides extended periods of self illumination.
Cost-effective alternative to powered signs.
400ml and 600ml cans.
Colours: White, Yellow.
Ideal for all applications where permanent
lines are required such as car parks, factories,
warehouses etc. It can also be used with
stencils to paint safety notices on the ground.
Fan nozzle for consistent lines; spot nozzle for
writing. 600ml cans.
Colours: White, Yellow, Black (all fan nozzle);
Red, Blue (both spot nozzle).
CODE 4
11261 400ml can
411262 600ml can
CODE 500387
Ideal for temporary marking or identification
of all timber, logs, drums, steel, plastic wrap,
pipes, concrete etc.
Standard colours: Black, Red, Light Blue,
Dark Blue, Dark Green, Orange, White,
Purple, Brown (note: not all colour/nozzle
combinations available).
Fluoro colours: Fluoro Green, Fluoro Orange,
Fluoro Red, Fluoro Yellow, Fluoro Pink.
CODE 5
00383 Fan Nozzle, Standard Colours
500384 Fine Nozzle, Standard Colours
500385 Standard Nozzle, Standard Colours
500382 Standard Nozzle, Fluoro Colours
WORKPLACE SAFETY
Spraywell Upside Down has many uses in
a variety of applications and industries. It
can be used on virtually any surface and
is commonly used in applications where a
temporary mark is required such as forestry,
landscaping, surveying, construction sites,
athletic fields and more. Solvent-based; one
nozzle type - leaves standard round mark;
400ml cans. Colours: White, Light Blue, Purple,
Fluoro Green, Fluoro Orange, Fluoro Red,
Fluoro Yellow.
NON SLIP TAPE
SPRAYWELL INK MARKER
Excellent adhesion to most substances; high
opacity, perfect for stenciling; very good
weathering properties and colour fastness;
adheres to wet surfaces; 440ml cans.
Colours: Red, Black, White, Green,
Orange and Light Blue.
CODE 405334
• For marking walls and floors in warehouses,
factories etc
• 48mm plasticised PVC, 33m roll length;
available in additional colours too
• Easily-applied anti slip tape, all 50mm W,
roll length varies
• Aluminium oxide grit on PVC film, with
acrylic self-adhesive
• Uses: stairs, floors, ladders, plant running
boards etc
CODE 4
02320 Yellow/Black
402321 Red
402322 White
410111 Red/White
402324 Yellow
CODE 4
02325 Black, 18m
402326 White, 18m
402327 Yellow, 18m
402328 Glow in dark, 10m
402329 Yellow/Black, 10m
FLOOR MARKING TAPE
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
159
VEHICLE SAFETY
VEHICLE LIGHTING
WORKPLACE SAFETY
Britax and Code 3 beacons and
minibars are fitted to numerous
construction, infrastructure, mining
and council vehicles, as well as
many roadside service companies.
Rest assured – you can be confident
that you are buying the best quality
with the best design features and
latest technology.
Beacons in the Britax range feature
polycarbonate lenses, a variety
of mounting options, and dual
voltage capabilities. Polycarbonate
provides high quality, lightweight
and impact resistant lenses that
increase the durability of Britax
beacons. Britax Automotive
Equipment and Code 3 are ISO9001
certified companies, all beacons
and bars meet SAE standards.
• Four selectable flash patterns including
simulated rotate
• Duplex high optic lens with six 10W LEDs
• O-ring sealed polycarbonate lens, IP67
• SAE Class 1, ECE approved
• Heavy duty die-cast alloy gel-filled base
CODE 4
09879 BF600-00 Flange base
409880 BF604-00 Suction magnetic base
411444 BF605-00 Flexipole mount
LSS222 SERIES HIGH INTENSITY
16 LED BEACONS
•4
0 in-built flash patterns including four
simulated rotating patterns from 50 - 250 FPM
•1
6 high intensity 1W LEDs with wide angle
parabolic reflectors and lens optics
• Waterproof, shock resistant, potted
circuit board
•A
mber LEDs with amber or clear
polycarbonate lens, black ABS base
CODE 4
06278 LSS222A Flange base
406279 LSS222AM Suction magnetic base
LB420 SERIES HEAVY DUTY GEAR
DRIVE TWIN HALOGEN MINIBAR
390 SERIES HALOGEN
DUAL VOLTAGE BEACONS
420 SERIES TWIN HALOGEN
MINIBARS
• Tough polycarbonate impact resistant lens
• Quiet whisper drive mechanism
• Integrated low friction reflector module
• Twist lock style lens with locking screw,
quick release bulb system
• Aerodynamically designed polycarbonate
lens and body
• Twin belt drive rotators for quiet operation
• 2 x 12V bulb supplied
• Dual voltage motor – automatically switches
to voltage of bulb fitted
•G
ear drive model 420 Minibar suitable for
heavy duty applications
•A
erodynamically designed polycarbonate
lens and body
• Twin rotator with flat mirror
•D
ual voltage motor – automatically switches
to voltage of bulb fitted
CODE 8
11406 420-00 Flange base
811408 424-00 Suction magnetic base
811404 12V Bulb
811405 24V Bulb
CODE 4
04717 LB420A Flange base
409881 LB424A Suction magnetic base
811404 12V Bulb
811405 24V Bulb
CODE 8
11400 Flange base
811401 Suction magnetic base
811402 Flexipole mount
811404 12V Bulb
811405 24V Bulb
160
BF600 SERIES HIGH INTENSITY
6 X 10W LED BEACONS
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
VEHICLE SAFETY
VEHICLE LIGHTBARS
• 8 LED modules with built-in controller
• Multivolt 11-30V, synchronised flash patterns
• Polycarbonate lens, 360deg viewing
• Available in magnetic or fixed mount
• Magnetic: supplied with cigarette lighter
lead plus switch
• Fixed: supplied with mounting brackets and
3M power cable
• Magenta LED options available
• NZ-made for NZ conditions
CODE 4
06213 Magnetic, amber LED, clear lens
406215 Magnetic, red LED, red lens
406212 Fixed, amber LED, clear lens
406214 Fixed, red LED, red lens
OPTIMAX MAGNETIC BEACON
85658A
SPECTRA LED FIXED
1200MM LIGHTBAR
• 12 LED modules, dual voltage: 12v or 24v
• Cool beam technology; energy efficient
• Long life: 60,000 hours +
• Multiple flash patterns (selectable)
• Auto-dimming in low light (selectable)
• Optional: pair of front-facing white LEDs
• Optional: clamp brackets for non-permanent mounting
CODE 4
06217 12 Amber LED, clear top Lens
406219 18 Amber LED, clear top Lens
406221 18 LED red top lens
406223 Non-permanent mounting kit (pair)
Nautech Electronics’ range of
state-of-the-art low-profile, low-drag
light bars feature modular design
with built-in controller, multiple LED
modules and synchronised flash
patterns, providing reliability, high
visibility and 360-degree viewing.
100% NZ made using quality
components and designed for
NZ conditions. Nautech is an ISO9001
certified company and all light bars
meet SAE standards when
properly configured.
SENTRY LED PORTABLE
STROBE LIGHT
• Flange base
• Dual voltage 12/24V
• High impact polycarbonate lens
• Radio suppressed
• Bulb not Included
• Portable battery-powered strobe light
(Amber) with magnetic base
• LED technology powered by two D-size
batteries (not supplied)
• Low current draw,100+ hours of battery
• Off/on weatherproof switch; internal slide
switch to activate light sensor
for automatic day/night switching
CODE 4
07842 Beacon
811404 12V bulb
811405 24V bulb
CODE 4
07843 Beacon
811404 12V bulb
811405 24V bulb
CODE 4
06162 Portable Strobe Light
406163 Handle
MAGNETIC STROBE 85339A
FIXED STROBE 85338A
• Single flash strobe light (Amber)
• Magnetic base
• 12-80 volts
• High-impact polycarbonate lens
• Cigarette lighter plug and 2.5m spiral lead
• Candela seconds: 60
• Single flash strobe light (Amber)
• Flange base
• 12-80 Volts
• Includes mounting bolts and gasket
• Flash rate: 60 (Single)
• Candela seconds: 60
CODE 406164
CODE 401256
• Magnetic base rated for use at 110km/h
• Dual voltage 12/24V
• Cigarette lighter plug and 3.5m spiral lead
• High impact polycarbonate lens
• Radio suppressed
• Bulb not Included
OPTIMAX FIXED BEACON 85650A
WORKPLACE SAFETY
MAGNETIC LED MINIBAR
SAFETY TRIANGLE
High quality safety triangle. ideal for
passenger car safety and 4WD enthusiasts
(designed to international standards of
reflectivity, stability and operating markings).
CODE R
S2301 Pack of 1
401254 Pack of 3
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
161
VEHICLE SAFETY
CONSPICUITY TAPE
Keeping your fleet
safer with 3M™
Diamond Grade™
technology
3M™ Diamond Grade™ 983 and 987
Series reflective markings deliver...
VEHICLE SAFETY FLAG
• Reduced chance of an accident
up to 30 TIMES and saves lives
•1
0mm fibreglass rod with PVC plastic coating
• Double stitched durable reflective X flag:
red or yellow
• Quick disconnect base
WORKPLACE SAFETY
• Delivers outstanding vehicle
visibility, alerting more road users
faster and earlier.
CODE 4
11085 1.0m
411409 1.5m
411410 2.0m
411411 2.5m
411412 3.0m
• Meets the Australian Trucking
Association Voluntary Code of
Practice and mandatory European
regulations under ECE104
• Less vehicle downtime and
decreased repair costs
DIAMOND GRADE™
CONSPICUITY TAPE
Highly reflective micro-prismatic sheeting for
application to sides and rear of large trucks
and trailers to increase visibility. Features
easy-to-remove liner, pre-sealed edges and
non-metallic material to prevent corrosion.
Sold per metre.
CODE 1
18044 White 50mm
118079 Red/White 50mm
118236 Yellow 50mm
411420 Red 50mm
VEHICLE SAFETY FLAG-SPLIT POLE
•1
0mm fibreglass rod with PVC plastic coating
•D
ouble stitched durable reflective X flag:
red or yellow
•Q
uick disconnect base
• S plit joiner separates the pole into two pieces
CODE 4
11405 1.0m
411406 1.5m
411407 2.0m
411408 2.5m
411084 3.0m
• Protect your company against
potential legal action related to
third party safety
• Employee satisfaction high workplace safety
• Improve corporate image
through being more proactive
about safety
SOLAR NIGHT SAFETY LIGHT
• Night hazard warning light on parked
trucks, trailers, static plant and miniskips etc
• One eight hour charge provides 72 hours of
continuous LE light
• Visible from 500m
• Robust aluminium construction
103x103x25mm
CODE 409440
162
TRUCK TIE DOWN
• Heavy duty lashing suitable for urban and
intercity work
• Includes hook and keepers and two
protective sleeves
• Length 9.0m, width 50mm
• Lashing capacity 2500kg
CODE 500901 Truck
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
MIRRORS & ELECTRICAL
CONVEX SAFETY MIRRORS
Better vision in areas
often difficult to see
STANDARD MIRRORS
Designed for outdoor use and will withstand
windy and wet conditions. Ideal for traffic at
risk areas.
CODE 1
8044S 450mm Acrylic Face
18062S 600mm Acrylic Face
400553 760mm Acrylic Face
18114S 900mm Acrylic Face
16087S 800mm Stainless Steel Face
Designed solely for indoor use to reduce theft
and accidents. Ideal for situations such as
retail stores, offices and warehouses.
CODE 1
01648 300mm Acrylic Face
101656 450mm Acrylic Face
103268 600mm Acrylic Face
400552 760mm Acrylic Face
101672 900mm Acrylic Face
18112J 1200mm Acrylic Face
DOME MIRRORS
HEAVY DUTY PLUG BOSS
POWERBOARDS
Spacing for up to three transformer plugs.
Cable management, ‘parking clip’ plug.
CODE 4
06320 6 plug 3.1m lead, yellow
406321 5 plug 1.8m lead, black
AC PRO HEAVY DUTY EXTENSION
LEADS
Heavy duty extension leads.
CODE 4
07766 20m Blue 15A cable with 15A plug
407767 30m Red 15A cable with 10A plug
These mirrors provide for wide area surveillance
such as in retail areas or for warehouse use.
Suitable for indoor use only.
CODE 1
01737 Half Dome 600mm
18553H Half Dome 900mm
18596H Full Dome Wide Area 1200mm
18585H Full Dome Wide Area 600mm
18590H Full Dome Wide Area 900mm
WORKPLACE SAFETY
HEAVY DUTY MIRRORS
Manufactured in NZ. Extensive range
of 100% virgin, optical grade, acrylic
or unbreakable electro-polished
stainless steel convex mirrors.
Impact and UV resistant, sealing
and bracket system guarantee easy
installation and a long service life.
YOU MAY ALSO BE
INTERESTED IN:
BODYGUARD PORTABLE RCD
Ideal for all trades, plugs straight into standard
power points.
• The portable power solution for construction
sites and workshops
• AS/NZ3012 approved
• Built in RCD safety switch to help protect
against electrocution
• Built in MCB for localised overload protection
• Double pole shuttered outlets
• Faulty supply detection relay - cuts off
power if lead is damaged
• Four sockets
CODE 4
06322 1.6m RCD lead
406323 20m RCD lead
CODE 4
06324 10 amp RCD
406325 15 amp RCD
ELECTRESAFE RCD
GO TO PAGE
172
ROTATING
ELECTRICAL PLUG
LOCKOUTS
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
163
FLOOR/WALKWAY SAFETY
300 SERIES – MEDIUM RESILIENT
SAFETY-WALK
In black or grey colours for barefoot or
shoe-traffic areas in locker rooms, conveyors,
boats etc.
Peel-and-stick slipresistant tapes and
treads making
slippery areas safer.
CODE
COLOUR
SIZE
411417
Black
51mm x 18.3m roll
406065
Black
102mm x 18.3m roll
406066
Grey
51mm x 18.3m roll
406067
Grey
102mm x 18.3m roll
500 SERIES – CONFORMABLE
WORKPLACE SAFETY
In black or yellow colours for shoe-traffic
areas on irregular surfaces such as tread
plate, screw heads, riveted equipment,
ladders and loading ramps.
3M’s range of Safety-Walk™ products
provide a low cost solution to making
slippery areas in your workplace safer
to walk on.
CODE
COLOUR
SIZE
406068
Black
51mm x 18.3m roll
406069
Black
102mm x 18.3m roll
406070
Yellow
102mm x 18.3m roll
CODE
COLOUR
SIZE
402345
Black with
Phosphorescent
Strip
50mm x
20 m roll
COLOUR
SIZE
115118
Black
25mm x 18.3m roll
SAFETY STEP FLOOR PLATES
115126
Black
51mm x 18.3m roll
115134
Black
102mm x 18.3m roll
411418
Black
152mm x 18.3mm roll
404374
Black
305mm x 18.3m roll
• Minimise the risk of slips and falls
• Surface is high traction, high visibility,
hard wearing
• Easy to install; sheet size 600mm x 600mm
• Customised sizes available
on request
Black
610mm x 18.3m roll
51mm x 18.3mm roll
402344
Yellow
51mm x 18.3m roll
404375
Yellow
102mm x 18.3m roll
CENTURY PILE
Recommended for maximum adhesion.
DESCRIPTION
406071
Primer 950ml
406072
Edge Sealing Compound
SAFETY STEP STAIR GRIPS
• Minimise the risk of slips and falls
• Surface is high traction, high visibility,
hard wearing
• Easy to install
CODE 5
00496 450 x 50 x 20mm
500497 580 x 50 x 20mm
500498 730 x 50 x 20mm
164
CODE 4
07890 900mmx600mm
407891 1500mmx900mm
407892 1800mmx1200mm
CODE 500499
PRIMER AND EDGE SEALER
CODE
NEEDLE RIB
• Tough entrance matting; non-fraying,
non-fading, non-rotting; backed by
anti-stain PVC
• Deep ribbed polypropylene pile effectively
scrapes and dries shoes
• Clean by shaking or vacuuming, and
washing in soapy water – rinsing thoroughly
• Low non-trip edges
• Standard sizes, or cut to length in widths:
900mm, 1200mm, 1800mm
CODE
Clear
CODE 4
07306 900mm
407307 1200mm
407308 1800mm
In black with the same properties as the
600 series this tape features a white
glow-in-the-dark strip for work areas and
emergency exit stairwells.
In clear, black and yellow colours for
shoe-traffic areas in heavy traffic areas such
as stairs, ramps, running boards, construction
machinery and vehicles.
411419
• Highly slip-resistant in all weathers, even in
icy conditions
• Ideal for walkways, ramps, entrance ways –
inside and outside
• Heavy duty, UV resistant, 7mm thickness –
will not wear out
• Excellent anti-fatigue and sound
absorbing qualities
• Anthracite colour, sold per metre, cut to
length, widths: 900mm, 1200mm, 1800mm
LITE SERIES – PHOSPHORESCENT
600 SERIES – GENERAL PURPOSE
102865
AKO SAFETY
• Highly absorbent entrance mat; high-twist
nylon yarn bonded to nitrile rubber
• Low profile, reinforced edges, sits flat no edge curl, cleated underneath to
prevent slipping/rucking
• Completely launderable; 10 year
guarantee against pile and colour loss
• Available in black, brown, charcoal,
navy, green
CODE 4
06307 1200mmx800mm
406308 1450mmx850mm
406309 1800mmx1200mm
406310 3000mmx850mm
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
FLOOR/WALKWAY SAFETY
AMS WORKMATS
• All purpose: lightweight, anti-fatigue, nonskid, wet floor protection
• Flow-through holes for wet area drainage;
depth of holes also accommodates any
debris, keeping surface clear
• Bevelled edges ensure no trip hazards, plus
easy trolley access
• 12mm thick, available in black natural
rubber or terracotta nitrile rubber
• Standard sizes, or cut to length in widths:
900mm and 1500mm (bevel-edged)
CODE 4
07895 Black natural rubber 600mmx900mm
403024 Black natural rubber 1500mmx900mm
403023 Terracotta nitrile rubber 1500mmx900mm
WORK DECK
• Extremely heavy duty 25mm all purpose
• Black natural rubber; anti-fatigue; absorbs
shock and noise
• Bevelled edges for safety. To cover large
spaces, square-edged modules, plus ramp
borders, are available
• Flow-through holes for wet area drainage
• Standard sizes, or cut to length in widths:
800mm, 1000mm, 1200mm, 1500mm
(all bevel-edged)
CODE 4
04289 900mmx600mm
404290 1200mmx900mm
Anti-fatigue matting provides a soft,
comfortable floor to work on.
This encourages happier people,
decreased absenteeism, and
improved productivity.
FATIGUE FIGHTER
• Long lasting, abrasion-resistant, durable –
warranted against delamination
• 12mm thick; pebble-finish vinyl over
integrated foam sponge base
• All edges bevelled for safety
• Order cut to required length;
width 900mm
INTERLINK MAT
LINK MAT
• Slip-resistant chequer plate surface
• Cost effective, utilising interlocking modules
for longer lengths
• Designed to absorb shock and cushion feet
from hard surfaces
• Bevelled edges ensure no trip hazards,
plus easy trolley access
• 14mm black natural rubber;
end piece: 800mm x 700mm,
centre piece: 800mm x 700mm
CODE 4
04286 End piece
404287 Centre piece
Working or standing on cold, hard
floors can cause foot and leg
discomfort, which will often spread to
the back too.
CODE 4
03017 1200mmx800mm (ramp edge)
403016 1500mmx1000mm (ramp edge)
402999 1000mmx500mm (square edge)
ERGO MAT
• Superior comfort when standing for
long periods
• Ergonomic trapped-air bubble design
provides anti-fatigue benefits
• Ramped edges and rounded corners ensure
no trip hazards, plus easy trolley access
• Closed-surface style means easy-clean;
anti-creep feet to keep mat in place
• 12mm black natural rubber, standard sizes,
or cut to length in widths: 600mm, 900mm,
1200mm
Reduced fatigue
improved safety
WORKPLACE SAFETY
SAFETY CUSHION
• Modular interlocking anti-fatigue system for
large or irregular-shaped spaces
• Available with easy-clean smooth surface,
or with holes to allow liquids to drain away
• Black or yellow bevel-edged borders can
be attached for trip safety and easy
trolley access
• Heavy duty natural rubber; nitrile rubber
also available in the drain-hole option
• Standard size, or cut to length - width 915mm
CODE 403020 915mm square, smooth surface
403021 915mm square, drain-holes
403018 Yellow bevel-edged border
FOOTWASH
• Constructed using very heavy duty rubber
to withstand most chemicals
• Non slip, ribbed scrapers on the base ensure
thorough cleaning of footwear
• Bright yellow, bevelled surround for
non-trip safety
CODE 402997 1000mmx820mm
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
165
MATERIALS HANDLING
ROUGH TERRAIN DRUM TRUCK
Medium-duty drum truck with optional tie-down.
For low volume handling of 60L or 200L steel
drums and general purpose use.
• Wheels: 300mm pneumatic
• Lip size: 380mm x 230mm
• Load capacity: 200kg
Heavy-duty drum truck with sliding catch for
securing drum.
• Large pneumatic wheels are ideal for rough
terrain such as gravel and floor grates
• 100mm nylon jockey wheels for stability
when loading/unloading pallets
• Wheels: 400mm pneumatic
• Load capacity: 380kg
CODE 402437 DTC
CODE 402434 DTZ80
WORKPLACE SAFETY
COMBINATION DRUM TRUCK
GOATTHROAT™ HAND-PRESSURISED
CONTAINER PUMPS
• For simple, safe and efficient manual
transfer of liquids from containers and
drums up to 200 litre capacity
• Can be used with acids, chemicals,
solvents, fuels, additives, as well as general
purpose cleaning products etc
• Containers can remain in upright position,
and the pump’s leak-proof design
avoids spills
• Pump body is non-reactive polypropylene,
with sealing options available in Nitrile,
EPDM or Viton
• Tap dispenses precisely controlled amounts
CODE 4
02427 GT100 Petroleum-based products (Red)
402428 GT200 General purpose chemicals (Blue)
402429 GT300 Aggressive chemicals (Green)
INDUSTRIAL DRUM TRUCK
Heavy-duty drum truck with smooth wheels
for industrial applications.
• 100mm nylon jockey wheels for stability
when loading/unloading pallets
• Shown fitted with optional plastic drum
attachment (402436)
• Wheels: 250mm solid rubber
• Load capacity: 320kg
CODE 4
02435 Drum truck DTWHBB
402436 Plastic drum attachment DTZZ
DRUM TIPPING CRADLE
Rock back onto wheels to tilt drum horizontally
and transport. Telescopic handle extends for
ease of handling.
• Suits 200L drums
• Wheels: 100mm nylon
CODE 402430 DC1
YOU MAY ALSO BE
INTERESTED IN:
GO TO PAGE
327
OIL GRIP GLOVES
166
DRUM WEBBING SLING
DRUM LIFTING CLAMP
For lifting of 60 litre and 200 litre drums,
plus a variety of plastic drums.
• Ratchet secures drum
• Load capacity: 300kg
For lifting 60 litre and 200 litre drums vertically,
horizontally or invert and dump contents.
• Self-locking jaws
• Use with overhead hoist
• Load capacity: 1000kg
CODE 402424 DWS
CODE 402425 DLC
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
MATERIALS HANDLING
HAND PALLET TRUCKS
• High strength steel construction with
powder coated finish
• Sealed hydraulics with overload protection and pressure relief valve
• Maintenance guide with parts list and instruction manual included
• Conforms to international standards EN 1757-2
• 2 year warranty
MODEL
CAPACITY
(KG)
FORK
LENGTH (MM)
FORK
WIDTH (MM)
MIN/MAX
HEIGHT (MM)
408413
JBS-PTN-2
1500
1150
520
75/190
406520
JBS-PT-1
2500
1150
550
80/200
LIFTING SLINGS, FLAT & ROUND
• Used with cranes, hoists and blocks
• Flat slings have integral eyes at ends; round
slings are endless style
• Colour coded for easy identification of
lifting load limits
• Compliant with Australian standards,
supplied with test certificate
CODE
TYPE
LENGTH (M)
COLOUR
MANUAL SCISSOR LIFT TABLES
500917
Flat
2
Purple
• Lifting and transporting heavy loads
• Effortless raising and lowering of loads via use
of hydraulics
• All steel construction with powder coated finish
• Supplied with test certificate, parts list and
instruction manual
403008
Flat
3
Green
500923
Flat
3
Yellow
500933
Round
2
Purple
403009
Round
3
Purple
500935
Round
2
Green
500936
Round
3
Green
500898
Round
3
Yellow
CODE
MODEL
CAPACITY (KG)
TABLE HEIGHT (MM)
TABLE SIZE (MM)
403003
JBS-SCIS-150
150
220/720
450 x 700
403004
JBS-SCIS-300
300
295/880
500 x 815
406521
JBS-SCIS-350
350
355/1300
500 x 910
403005
JBS-SCIS-500
500
295/880
500 x 815
LIFTING LOAD LIMITS (KG)
JBS
COLOUR
CODE
VERT
PURPLE
1000
CHOKE BASKET
90˚
120˚
1000
800
2000
1400
GREEN
2000
1600
4000
2800
2000
YELLOW
3000
2400
6000
4200
3000
WORKPLACE SAFETY
CODE
YOU MAY ALSO BE
INTERESTED IN:
GO TO PAGE
159
SINGLE DECK TROLLEY
HAND TRUCK
For general purpose medium-duty use.
Ideal for cartons, boxes and delivery purposes.
• Height: 1300mm
• Lip size: 360mm x 220mm
• Load capacity: 150kg
• Lightweight and versatile trolley
• Fold down handle for easy transportation
• Plastic coated steel deck with corner buffers
• Fitted with two fixed and two swivel castors
• Maximum load: 150kg
• Dimensions: 620mm x 920mm
CODE 404267 GN40
CODE 402438 4VDS3C
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
FLOOR
MARKING
TAPE
167
LADDERS/ACCESS/PLATFORMS
PRO SERIES FI-GLASS
PLATFORM LADDER
WORKPLACE SAFETY
• Heavy duty fi-glass side rails,
structural grade aluminium rungs
• Made to standard AS/NZS 1892.3
• Ideal where electrical risks may be present
• Load rated to 150kg
• Anti-slip platform deploys/locks automatically
• Platform area: 660mm x 360mm; guard rail
900mm above platform
• Anti-slip rubber feet
• 5 year warranty
• Optional: spring-loaded wheel kit; safety
gate with tool tray
• Also available in structural grade aluminium
CODE
OVERALL
HEIGHT
PLATFORM
AT HEIGHT
REF
411370
1.5m
0.6m
PROPF5/2
411371
1.8m
0.9m
PROPF6/3
411372
2.1m
1.2m
PROPF7/4
411373
2.4m
1.5m
PROPF8/5
411374
2.7m
1.8m
PROPF9/6
411375
3.4m
2.4m
PROPF11/8
ACCESS PODIUM MK1
REACH HEIGHT: 3.2M
• Fits through standard doorways while
still erected
• Wide range of platform heights 420, 670,
920 and 1170mm
• Size: (d) 1220 x (w) 670 x (h) 1990mm
• Frame weight 25kg
• Folds to 1220 x 250 x 1990mm
• Also available in 3.5m and 3.9m reach
CODE 411431
ACCESS PODIUM 750
REACH HEIGHT: 2.75M
• Two step podium with large snap lock back
brace for great stability
• Platform heights of 250 and 500mm
• Size: (d) 1220 x (w) 670 x (h) 1770mm
• Frame weight 18kg
• Folds to 1220 x 250 x 1770mm
• Also available in 2.5m and 2.96m reach
CODE 411432
ALUMINIUM WORK PLATFORM
• Platform height 500mm; load rated to 120kg
• Platform dimensions: 1100mmx450mm
CODE 411384
PRO SERIES DOUBLE SIDED FI-GLASS
STEP LADDER
• Heavy duty fi-glass side rails, structural
grade aluminium rungs
• Made to standard AS/NZS 1892.3
• Ideal where electrical risks may be present
• Load rated to 150kg
• Anti-slip rubber feet
• 5 year warranty
• Also available in structural grade aluminium
CODE 4
11376 PROSF4D - 1.2m
411377 PROSF5D - 1.5m
411378 PROSF6D - 1.8m
411379 PROSF7D - 2.1m
411380 PROSF8D - 2.4m
168
PRO SERIES FI-GLASS STEP
EXTENSION LADDER
• Heavy duty fi-glass side rails, structural
grade aluminium rungs
• Made to standard AS/NZS 1892.3
• Very versatile: adjustable for use as step
ladder, stairway ladder, extension ladder
• Ideal where electrical risks may be present
• Load rated to 150kg
• Heavy duty fixed anti-slip rubber feet
• V-rung with rubber pad for pole work
• 5 year warranty
• Also available in structural grade aluminium
CODE 4
11381 PFSE6 - 1.8-3.0m
411382 PFSE7 - 2.1-3.7m
411383 PFSE8 - 2.4-4.3m
SAFETY STEP
• Load capacity rated 150kg maximum
• Fluoro yellow non-skid panels
• Dimensions: base 515x515mm, platform
388x388mm, height 364mm
CODE STEPSAFE
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SAFETY KNIVES
LEVEL 3
FULLY AUTO-RETRACTABLE
AUTO-RETRACTABLE SPRING LOADED
• “Thumb off” for spring loaded retraction at
end of cut
• Suitable for left and right handers
• Ideal for cutting all types of materials
CODE 4
04369 25mm SECUNORM PROFI25
404368 40mm SECUNORM PROFI40
404367 0-25mm Adjustable SECUNORM PROFI Multiset
500170 Replacement 25mm blades, 10 pack
• Fully auto retraction at end of every cut
• Suitable for left and right handers
• Ideal for cutting all types of materials
CODE 4
04370 27mm SECUPRO MEGASAFE metal
403370 27mm SECUPRO MAXISAFE polycarbonate, top slider
500177 10mm SECUPRO OPTISAFE polycarbonate, 4-sided blade
500170 Replacement - blades for MEGASAFE & MAXISAFE, 10 pack
500172 Replacement blades for OPTISAFE, 10 pack
LEVEL 3
FULLY AUTO-RETRACTABLE,
SQUEEZE ACTION
• Fully auto retraction at end of every cut
• Integrated blade lock
• Suitable for left and right handers
• Ideal for cutting all types of materials
CODE 4
06314 10mm SECUPRO MARTEGO metal handle, soft grip
407813 10mm SECUPRO MERAK polycarbonate handle
406315 Replacement blades for MARTEGO & MERAK, 10 pack
LEVEL 2
CONCEALED BLADES
• Blades safely concealed
• Cuts stretch wrap, poly strapping, bubble
wrap, tape
• Metal tip to slit adhesive tapes
CODE 4
03371 SECUMAX COMBI
404364 SECUMAX EASYSAFE
500239 Replacement blades for COMBI, 10 pack
500172 Replacement blades for EASYSAFE, 10 pack
KLEVER KONCEPT:
RECESSED BLADES
KLEVER X CHANGE:
RECESSED BLADES
• Reduced damage to carton contents
• Dual hook design lasts twice as long as
single blade cutters
• Disposable, no blade change
• High vis colour makes it
easy to find
• Reduced damage to carton contents
• Replaceable blade head
• High vis colour makes it easy to find
CODE 406313
CODE 4
07810 Klever X Change
407811 Replacement blades, 10 pack
407812 Replacement blades for
double wall boxes, shrinkwrap
WORKPLACE SAFETY
LEVEL 4
SMOKERS CEASEFIRE
USED BLADES/SHARPS
CONTAINER
Used blades are a hazard when
disposed of incorrectly. Reduce risk
with a used blade container.
CODE 400322
• To keep work areas clear of cigarette butts
• Made from flame-retardant polyethylene
• Won’t rust, dent or crack
• Tie-down notches for security and stability
in weather
• Butts collect in galvanised
steel bucket
• Available in colours:
Beige and Grey
CODE 501229
ULTRA SMOKESTOP
• To keep work areas clear of cigarette butts
• Made from flame-retardant polyethylene
• Won’t rust, dent or crack
• Butts collect in galvanised steel bucket
• Available in colours: Black, Green, Red,
Grey & Beige
CODE 405710
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
169
SITE SAFETY - LOCKOUT PADLOCKS
LOCKOUT & TAGOUT
What is lockout?
Lockout is an important safety
procedure which involves shutting
off the power to industrial machines
or equipment during maintenance
or repair. This procedure protects
employees from risks caused by
power sources. Used properly, in
conjunction with a well-planned
lockout process, the safety padlock
helps ensure that employees will not
inadvertently activate a piece of
equipment while someone else is
working on it.
Master Lock Safety
Lockout Padlocks
STANDARD FEATURES
• Can be keyed alike, keyed different
or master keyed
• High security, reserved for safety cylinder
– over 100,000 key changes available
• Key-retaining, ensuring padlock
cannot be left unlocked
(Zenex: standard;
Aluminium: optional)
ZENEX™ SAFETY LOCKOUT
PADLOCKS – 0410 SERIES
STANDARD FEATURES plus:
• 6mm dia plated steel shackle for
corrosion resistance
• Tough Zenex™ thermoplastic body for
chemical resistance and extreme conditions
CODE 1
80200 38mm Shackle
411120 76mm Shackle
• Can add durable polypropylene
photo ID pockets and/or permanent
laser engraving to padlock faces
WORKPLACE SAFETY
• Multiple padlock body colours
allow for quick ID (Zenex: 8 colours;
Aluminium: 6 colours)
ZENEX SAFETY LOCKOUT PADLOCKS
- S31 SERIES
STANDARD FEATURES plus:
• 4.76mm dia 316 marine grade stainless
steel shackle
• Tough weather proof padlock cover
• Tough Zenex™ thermoplastic body for
chemical resistance
and extreme conditions
CODE 411102
SAFE PRACTICE:
1 EMPLOYEE - 1 PADLOCK - 1 KEY.
All employees should carry a unique
key so that their own padlock cannot
be opened by any other key.
Lockout is the preferred isolation
method for equipment maintenance
as it physically stops accidental
equipment ignition.
What is
tagout?
Tagout is the
placement of
a tag on the
machine or
device which is
being worked on,
advising all staff and contractors that
the machine is under maintenance.
A tag on its own is not an effective
isolation device. A tag should only
be attached to the machinery
once the operator or maintenance
worker has locked out the
energy source.
ZENEX™ SAFETY LOCKOUT
PADLOCKS – 0406 SERIES
STANDARD FEATURES plus:
• 6mm dia dielectric nylon shackle
• All other components are non-conductive,
non-magnetic and non-sparking
• Tough Zenex™ thermoplastic body for
chemical resistance and
extreme conditions
CODE 406059
SAFETY LOCKOUT IDENTIFICATION
LASER ENGRAVING
• Engrave company name and logo
• Engrave employee name and ID number
• Engrave key number
ALUMINIUM SAFETY LOCKOUT
PADLOCKS – 6835 SERIES
STANDARD FEATURES plus:
• Aluminium with baked-on powdercoat
finish; stays bright
CODE 407869
170
PADLOCK PHOTO IDENTIFICATION LABELS
• Self-laminating
• Easy to use
• Suits 0410, 0406 and S31 safety padlocks
CODE 4
11127 Laser engraving
411125 Padlock photo identification labels (6 pk)
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SITE SAFETY - LOCKOUT HASPS
CRITICAL PROCEDURES
Master Lock Hasps
STANDARD FEATURES
• Disables equipment while repairs/
adjustments are undertaken
• Multiple person lockout
• Hasps attach to energy controls;
safety padlocks are applied
• Controls enabled only after all
padlocks removed
Identify isolation area
STAINLESS STEEL HASP – S431
STANDARD FEATURES plus:
• 316 marine grade stainless steel;
4mm dia shackle
• Suitable for small lockout points
• Ideal for corrosive environments
• Suits S31series Zenex padlocks
CODE 411101
Identify the energy sources to
be isolated and check that the
equipment being repaired/serviced
can be isolated with a safety
padlock or other lockout device.
Apply safety devices
ALUMINIUM JAW HASPS –
0416/0417/0429
STEEL JAW HASPS – 0420/0421
STANDARD FEATURES plus:
• Heavy gauge steel
• Suits 0410 series Zenex padlocks
CODE B
65375 0420 25mm jaw
B65376 0421 38mm jaw
STANDARD FEATURES plus:
• Spark-resistant aluminium
• 0416/0417 suit 0410 series Zenex padlocks
• 0429 (dual jaw) suits 0406 series Zenex
padlocks
Once equipment has been isolated,
make sure that no residual energy
remains. This danger can be real, even
if the energy source has been isolated.
CODE 4
07870 0416 25mm jaw
407871 0417 38mm jaw
407875 0429 44mm dual jaw
Caution before
reactivating
equipment
ALUMINIUM
SNAP-ON HASP - 0427
HEAVY DUTY STEEL JAW HASPS –
0418/0419
STANDARD FEATURES plus:
• Pry-proof steel
• Jaw diameter 25mm
• Suits 0410 series Zenex padlocks
CODE 4
07872 0418 4-padlock
407873 0419 8-padlock
Confirm no residual
energy remains
STANDARD FEATURES plus:
• Anodised aluminium and stainless steel
• Combines multiple person lockout with tag
out identification
• Includes high visibility re-usable write-on
safety label
• Suits 0410 series Zenex padlocks
CODE 410039
Prior to removing all safety padlocks
and other lockout devices, make sure
that the repair/service has been fully
completed, and all standard safety
precautions have been reinstated,
before reactivating equipment.
WORKPLACE SAFETY
Apply safety padlocks and lockout
devices. If several employees are
working on the same piece of
equipment then each employee
must place their own safety padlock
on the equipment.
KEY SYSTEMS
Master Lock solutions
• Determine the number of employees
required to use this system. Each
employee should have a unique key
code which is their’s alone.
• S elect the most appropriate Safety
Key system: Keyed Different, Keyed
Alike, or Master Keyed.
NON CONDUCTIVE
NYLON HASP – 0428
PLASTIC BODY SHACKLE HASP –
S430
STANDARD FEATURES plus:
• Thermoplastic nylon
• Ideal for electrical applications;
non-conductive, anti-sparking
• Jaw 25mm x 63mm
• Suits 0406 series Zenex padlocks
STANDARD FEATURES plus:
• Thermoplastic body ideal for
extreme conditions
• 4mm dia steel shackle makes it
suitable for smaller lockout points
• Suits S31 series Zenex padlocks
CODE 407874
CODE 411100
• Determine how many employees
will need to get more than one
safety padlock for lockout.
Those employees require Keyed
Alike padlocks.
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
171
SITE SAFETY - ELECTRICAL LOCKOUT
ELECTRICAL LOCKOUT
Preliminary
precautions
• Individuals equipped adequately
for personal protection
• Switch off circuit breaker
• Lock out equipment to prevent
re-energising
• Control dissipation of residual energy
•G
round electricity
• Tag out equipment
MINIATURE CIRCUIT BREAKER
LOCKOUTS – S2390/S2391/S2392
• Plastic with steel pins
• Locks out most miniature ISO/DIN
circuit breakers
• S2392 fits breakers which require pin-in
• All suit 0406 series Zenex padlocks
WORKPLACE SAFETY
CODE 4
06056 S2390: Toggle openings 11mm or less
406057 S2391: Toggle openings over 11mm
407878 S2392: Suits pin-in toggles
GRIP TIGHT™ CIRCUIT BREAKER
LOCKOUTS - 0491B/0493B
ROTATING ELECTRICAL PLUG
LOCKOUTS – 0487/0488
• Powdercoated steel and reinforced
polymer for tough environments
• Grip Tight™ design tightly clamps on circuit
breaker toggle grip
• Compact narrow-profile design permits
side by side breaker lockout
• 0491B suits tall/wide toggles; 0493B suits
single/double toggles
• Suits 0406 series Zenex padlocks
• Zenex™ thermoplastic body
• Outward/Inward rotation permits easy
installation and storage
• Effective in extreme conditions:
temperature range -46°C to +177°C
• Envelops electrical plug preventing
accidental reconnection
• High visibility safety labels included
• Suits 0410 series Zenex padlocks
CODE 4
06055 0491B
404559 0493B
CODE 4
01282 0487:Plugs 120-240 volt
401283 0488:Plugs 240-550 volt
MINIATURE CIRCUIT BREAKER
LOCKOUT - S2393
• Universal miniature circuit breaker lockout
can be tightened to fit the toggle using a
screwdriver (not included)
• Suits 0406 Zenex padlocks
CODE 407879
PERSONAL ELECTRICAL LOCKOUT KIT
• Set up for an individual worker; contains
high-use components
• Electrical lockout focus
• Contains: 3 safety padlocks, 6 asstd circuit
breaker padlocks, 1 hasp 0420, 1 snap-on
hasp 0427, 1 wall switch cover,
tags (12 pack)
CODE 411103
REMOVABLE PUSH BUTTON COVER
– S2151
172
• Temporarily prohibits access to a switch or
control, also avoiding the need to change
rotary switch settings
• Clear base and cover allow visibility of
nameplates and labels
• Horseshoe-shaped base allows easy retrofit,
positions off-centre if necessary
• Accommodates knobs up to 50mm dia
and 45mm height
• Suits 0410 series Zenex padlocks
PERMANENT PUSH BUTTON COVER
– S2153
CODE 407885
CODE 407886
• Ensures ready availability, and permits
instant lockout action
• Clear base and cover allow visibility of
nameplates and labels
• Accommodates knobs up to 50mm dia
and 45mm height
• Suits 0410 series Zenex padlocks
OVERSIZED PLUG AND
HOIST CONTROL – 0453
• Heavy duty nylon bag provides a broad
range of lockout solutions
• Accommodates up to 6 padlocks or hasps
• 0453L: 165x482mm; 0453XL: 254x660mm;
0453XXL: 356x914mm
CODE 4
11107 0453L
411387 0453XL
411388 0453XXL
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SITE SAFETY - VALVE LOCKOUT
GATE VALVE LOCKOUTS
LOCKOUT/
TAGOUT
(LOTO)
COURSE
CODE 4
01276 0480 Handle dia 2.71-8.12cm
401277 0481 Handle dia 5.41-13.54cm
401278 0482 Handle dia 10.83-17.60cm
401279 0483 Handle dia 16.24-22.07cm
401280 0484 Handle dia 21.66-35.19cm
401281 Set of 5
QUARTER TURN BALL VALVE
LOCKOUTS – S3476/S3477
• Heat resistant powder coated metal body
• One-piece easy to use design
• Suitable for manual quarter turn ball valve
handles to prevent activation
• S3476: valves 6.35-25mm;
S3477: valves 31-76mm
CODE 4
07880 S3476
407881 S3477
Code: LTT1
• Explains the importance
of locking out plant and
equipment
• Consequences of failing
to lockout plant and
equipment
• Details basic lockout
procedures
• Identifies the correct location
for lockouts
• Identifies appropriate
isolation and lockout devices
• States the methods of
lockout; and outlines the
importance of correct
procedures and training
See page 25
for more
information.
BUTTERFLY VALVE LOCKOUTS –
S3920/S3921
SEAL TIGHT™ BALL VALVE LOCKOUT
HANDLE-ON – S3068
SEAL TIGHT™ BALL VALVE LOCKOUT
HANDLE-OFF – 0468L
• Device clamps tightly on handle to prevent
valve activation
• Durable aluminium and steel construction
offers chemical, corrosion and heat
(to 538°C) resistance
•U
niversal-fit device envelops the valve stem,
handle removed, to prevent valve activation
• Includes write-on erasable labels
• S uitable for metal and PVC valves, insulated
pipes, pipes mounted close to a wall or ceiling
and valves with tight access
CODE 408432
CODE 501103
WORKPLACE SAFETY
• Scissor-action lockout surrounds the valve
handle; prevents accidental opening
• Multiple workers can apply their personal
locks or hasps
• The lockout rotates into itself to nest with
other sizes for storage
• Complete with high vis permanent reusable
safety labels
• Centre knocks-out to accommodate rising
stem gate valves
ADJUSTABLE CABLE LOCKOUTS
• Universal-fit lockout attaches to valve
handle to prevent activation
• Lightweight and compact design is easy to
store and transport
• Quick and easy application and removal
• Ideal for mining, power generation, oil/gas
and utility industries
• S3921 option includes 4 x 900mm cables
• One piece safety hasp and 4mm dia cable
allows ease of use
• Thermoplastic body plus insulated steel
cable ideal for extreme conditions
• High visibility, reusable write-on labels included
• Up to four workers can apply personal
safety locks
• Suitable for multiple circuit breaker panels
and side by side gate valve lockouts
• S806: 1.8m cable; S806CBL15: 4.5m cable
CODE 4
11112 S3920
411113 S3921
CODE 4
07883 S806
407884 S806CBL
PERSONAL LOCKOUT POUCH
• Set up for an individual worker; easy to
carry or wear
• General maintenance focus
• Contains: 3 padlocks KA, 1 hasp 0420,
tags (12 pack)
CODE 404982
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
173
SITE SAFETY - OTHER LOCKOUT DEVICES
PNEUMATIC LOCKOUT – S3900
• Operates on virtually all male
pneumatic fittings
• Scissor-action lockout renders the
fitting inoperable
• Corrosion-resistant stainless steel
• Multiple worker lockout when used
with lockout hasps
WORKPLACE SAFETY
CODE B64221
STEERING WHEEL COVERS
– 4716 /4720 /4724
• Provides visual deterrent during vehicle
maintenance
• Bold printed warning notifies employees
not to start or move vehicle
• Suitable for use on forklifts and other
industrial machinery
• Increased deterrence by using with a
cable to immobilise operating pedals
CODE 4
11108 4716: 406mm wheel dia
411109 4720: 508mm wheel dia
411110 4724: 610mm wheel dia
CONFINED SPACE ACCESS
CONTROL COVER – SOLID
CONFINED SPACE ACCESS
CONTROL COVER – VENTILATED
• Cover prevents unauthorised access to
confined spaces
• Also keeps out water, dust, dirt and pests
• Can be securely locked in place with a
MasterLock safety padlock
• Sizes: S, M, L, XL
• Cover prevents unauthorised access to
confined spaces
• Also keeps out water, dust, dirt and pests
• Can be securely locked in place with a
MasterLock safety padlock
• Sizes: S, M, L, XL
CODE 4
11114 S
411389 M
411390 L
411391 XL
CODE 4
11116 S
411395 M
411396 L
411397 XL
CONFINED SPACE ACCESS
CONTROL COVER – WITH TEST PORT
CONFINED SPACE ACCESS CONTROL
COVER – ELASTIC RED MESH
• Cover prevents unauthorised access to
confined spaces
• Also keeps out water, dust, dirt and pests
• Can be securely locked in place with a
MasterLock safety padlock
• Sizes: S, M, L, XL
• Cover prevents unauthorised access to
confined spaces
• Also keeps out water, dust, dirt and pests
• Can be securely locked in place with a
MasterLock safety padlock
• Sizes: S, M, L, XL
CODE 4
11115 S
411392 M
411393 L
411394 XL
CODE 4
11117 S
411398 M
411399 L
411400 XL
LOCKOUT STATIONS
LATCH TIGHT™
GROUP LOCK BOXES - 0503
• Secure storage of keys involved in multiple
key lockout
• Keys not able to be accessed until the last
lock is removed
• Wall mounted or portable
CODE 4
06058 0503 RED
411119 0503 YEL
174
• Provide a central location to hold safety
lockout/tag out padlocks and accessories
• Resilient polycarbonate material provides
higher heat and impact resistance
• Reinforced snap-lock clips for easy padlock
and hasp storage and removal
• Translucent lockable cover protects contents
• Components pictured are not included
CODE 4
08418 4 Lock
408419 10 Lock
408420 20 Lock
LOCKOUT STATIONS
• Provide a central location to hold safety
lockout/tag out padlocks and accessories
• Heavy duty steel; options available:
4 lock, 10 lock, 20 lock
• Components pictured are not included
CODE 189784
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SITE SAFETY - LOCKOUT TAGS
SAFETY LOCKOUT TAGS
Guardian Extreme™
safety lockout tags
• Tag size 146x76mm; 6 per pk
CODE 411129
CODE 411130
CODE 411131
CODE 411134
• Rugged, industrial grade
polypropylene provides long lasting
performance indoors and outdoors
• Withstand dust and dirt, high
humidity, UV radiation, harsh
chemicals, frequent washdowns
and extreme temperatures
• 100% Recyclable polypropylene
• Tested with over 40 chemicals
• Tags can be manufactured in metal
detectable material - special order
CODE 411135
CODE 411136
CODE 411140
CODE 411141
CODE 411133
CODE 411137
CODE 411132
CODE 411143
CODE 411128
WORKPLACE SAFETY
• Ideal for food processing facilities,
mining, chemical plants, refineries
and paper mills
SAFETY LOCKOUT TAGS
CODE 411139
CODE 411142
• Durable polyester laminated tags resist
water and grease
• Double-sided for writing name, department,
completion time and other details
SELF LAMINATING
PHOTO IDENTIFICATION TAGS
• Customise tag with worker name, department
and photo
• Clear adhesive overlay allows tags to be
personalised quickly on-site
• Tag withstands over 22kg of pull strength
(9.5mm grommet)
• 12 tags and 12 cable ties per pack
• Ideal for mining, power generation, oil and
gas, and utility industries
CODE 411144
CODE 411138
CODE 4
11401 Danger-Do Not Operate
411402 Self Laminating Photo Identification
PERMIT DOCUMENT HOLDER
• Durable PVC construction, clear PVC
window for displaying/storing permits,
lockout procedures and Material Safety
Data Sheets (MSDS)
• Reflective tape on front permit holder is
always visible
• Velcro™ closure ensures water, dirt and
grime is kept out
• Apply safety padlock to lock permit or
keys inside
CODE 411111
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
175
FIRE PROTECTION
FIRE EXTINGUISHERS
There are five common types of fire
extinguishers; water, foam, ABE dry
powder, CO2 and wet chemical,
each of which will put out specific
classes of fire.
Fire extinguishers display labels with
pictures to show the type of fire it
can be applied to. Class A, B, E and F
extinguishers also have a numerical rating
tested, based on AS/NZS 1850 standards.
APPLICATION - Energised
electrical equipment
such as industrial
switchgear and high voltage machinery.
APPLICATION Deep fryer fats and oils.
These oils are often
difficult to contain due to the potential
of fire spread on discharge.
RATING - Often also rated for other
classified risks i.e. A, B & E for Dry
Powder Extinguishers and B & E for CO2
Extinguishers which are best suited to
cover electrical risks.
NO
RATING - Gives specific reference to the
size of the deep fryer the extinguisher can
be used on i.e. 3F and 4F ratings are the
common industry standard requirements.
Fire blankets can also be used on smaller
oil fires encountered in domestic home
environments and commercial kitchens.
A
B
C
E
F
Wood, Paper
& Plastics
Flammable &
combustible
liquids
Flammable
gases
Energised
electrical
equipment
Cooking oils
and fats
TYPE OF EXTINGUISHER
Colour Scheme - AS 2444
Class A
WORKPLACE SAFETY
Class F
YES
CLASS TYPES
APPLICATION - Ordinary
combustibles like wood,
paper, cardboard and
most plastics.
RATING - Indicates the amount of
water contained in the extinguisher
and the amount of fire it will extinguish.
Class B
POWDER AB(E)
POWDER B(E)
CARBON DIOXIDE
WATER
APPLICATION - Fires
involving flammable
liquids such as kerosene,
grease, petrol, oil, etc.
RATING - Indicates the approximate
number of square metres of burning
flammable liquid a non expert can
expect to extinguish.
FOAM
WET CHEMICAL
FIRE BLANKET
Class C
APPLICATION - Fires
arising from gas pressure
vessels such as LPG
cylinders and gas stoves.
RATING - Usually doesn’t have a rating,
but the presence of the letter ‘C’
indicates that it is suitable for use on
Class C gas risks.
Class D
Commonly found in chemical
laboratories, automotive and aircraft
industry workshop environments.
APPLICATION - Flammable metal fires,
eg. magnesium, titanium, potassium
and sodium and they are often specific
for a given type of metal.
RATING - No rating or designated picture.
They are designed for Class D fires only.
176
Class E
FIRE HOSE REEL
REMEMBER P
WHEN USING AN EXTINGUISHER....
P.A.S.S. A
PULL THE PIN
AIM AT BASE OF SWEEP FROM
FIRE - SQUEEZE
SIDE TO SIDE
HANDLES
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
S
S
PULL THE PIN –
Break seal and test
extinguisher.
AIM AT BASE OF FIRE
– Ensure you have a
means of escape.
SQUEEZE THE
OPERATING HANDLE
– To operate
extinguisher and
discharge the agent.
SWEEP FROM
SIDE TO SIDE
- Completely
extinguish the fire.
FIRE PROTECTION
EXTINGUISHER LOCATION
Extinguishers need to be easily
accessible. They must not be located in
areas where the user could be blocked
in by the flames they are fighting.
If a site hazard has been identified, an
extinguisher should be located nearby.
INSPECTION & TESTING
• In accordance with NZS4503:2005
extinguishers are to be tested
and inspected by a competent
technician at least once every
12 months.
SERVICE TAGS
These are to be attached to every
fire extinguisher in use. These detail
last date of inspection, pressure test,
maintenance and survey performed.
Extinguishers should be mounted on
wall brackets and should be between
100mm and 1200mm above the ground.
EXTINGUISHER SIGNAGE
NZ SAFETY CATALOGUE HAS A
RANGE OF SIGNS WHICH MEET FIRE
REGULATIONS, SEE PAGES 212-213.
VEHICLE EXTINGUISHER
REQUIREMENTS
All motor vehicles are
recommended to
carry fire extinguishers.
The standard model
required for an average
size car would be a 1kg ABE
dry powder extinguisher
and for larger vehicles
a 1.5kg or 2.3kg ABE dry
powder extinguisher.
• Every 5 years extinguishers are
required to be discharged, pressure
tested, inspected and recharged.
WORKPLACE SAFETY
Signage is required so
that fire extinguishers
can be located
easily in an event of
an emergency. The
standards state that
they must be brightly
coloured red and
white for visibility
and show the
extinguisher type
and application.
They should be mounted 180mm to
1500mm above the ground and be
visible from up to 15m away in all
normal directions of approach.
BEFORE FIGHTING A FIRE:
• E xtinguishers should be regularly
inspected to ensure they are in good
working order. A few things to check
for include leaks, tampering and
corrosion.
• If an extinguisher has been partially
discharged it should never be
placed back in service until it has
been fully recharged and inspected.
For smaller models it will likely be
more cost effective to replace
the unit.
• If extinguishers are located in an
aggressive or corrosive environment
they will require more regular
inspections, maintenance every
6 months and pressure testing every
3 years.
• N Z Safety can arrange to have
regular inspections and servicing of
your extinguishers and hose reels.
• Ensure that the fire department has
been notified
• T he fire is small and not spreading
(a fire can double in size every
2-3 minutes)
REFER TO THE
EXTINGUISHER SELECTION
CHART ON PAGE 176 TO
IDENTIFY THE TYPE OF
EXTINGUISHER REQUIRED
FOR THE DIFFERENT HAZARDOUS
MATERIALS ON BOARD.
Extinguishers should always be securely
mounted in an appropriate vehicle
type extinguisher bracket.
•Y
ou can get out easily if you can’t
control the fire (ensure there is a
clear exit path)
•Y
ou have the right extinguisher for
the type of fire (check the label)
•Y
our extinguisher is in good working
order (inspected regularly)
•Y
ou know how to use the
extinguisher properly
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
177
FIRE EXTINGUISHERS
FLAME GUARD
EXTINGUISHERS
DRY POWDER
• Pressure indicator shows if ready
for use
• Fully rechargeable
• Easy to install
• Simple to operate
• Comply to AS/NZS 1841.5 standards
• Maritime NZ Approved
• One-year limited warranty
1.0KG ABE
DRY POWDER
1.5KG ABE
DRY POWDER
• 1A:10B:E rating
• Metal Vehicle
bracket included
• 2A.30B E rating
• Metal Vehicle
bracket included
CODE 402173
CODE 402174
2.3KG ABE
DRY POWDER
2.5KG ABE
DRY POWDER
• 2A:40B:E rating
• Wall/vehicle bracket
included
• 3A:40B:E rating
• Wall mounting
bracket included
CODE 402175
CODE 402176
WORKPLACE SAFETY
TYPES OF EXTINGUISHERS
ABE dry powder
Contains a dry chemical
extinguishing agent (powder) with
a compressed non-flammable gas
(nitrogen) as propellant. Creates a
non-flammable substance coating
on the extinguished material,
reducing the likelihood of re-ignition.
Rated mainly for A, B & E class use.
ACCESSORIES
USING FIRE
EXTINGUISHERS
REQUIRES THE
RIGHT TRAINING
EXTINGUISHER SERVICE TAG
CODE 403746
HEAVY DUTY
VEHICLE
EXTINGUISHER
BRACKETS
CODE 4
07679 4.5kg
407680 9.0kg
See page 21 for
more information.
178
4.5KG ABE
DRY POWDER
9.0KG ABE
DRY POWDER
• 4A:60B:E rating
• Wall mounting
bracket included
• 6A:80B:E rating
• Wall mounting
bracket included
CODE 402177
CODE 402178
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
FIRE EXTINGUISHERS
CARBON DIOXIDE
TYPES OF EXTINGUISHERS
Carbon Dioxide (CO2)
2.0KG
CARBON DIOXIDE
• 2B:E rating
• Wall mounting
bracket included
CODE 402182
3.5KG & 5.0KG
CARBON DIOXIDE
• Wall mounting bracket included
CODE 4
02183 5B:E rating - 3.5KG
402184 10B:E rating - 5.0KG
Highly pressurised compressed liquid
stored in the extinguisher. The gas
disperses quickly, effective from one
to two metres, expands and cools the
surrounding air, often causing dry ice
to shoot out which may form around
the nozzle. To avoid the fire re-igniting,
continue to apply the C02 extinguisher
even after the fire appears to be out.
WET CHEMICAL
The wet chemical agent discharges at
a controlled rate removing the risk of a
violent reaction that could potentially
spread the fire. Forms a blanket of
agent that smothers the fuel source
from oxygen and starves the fire.
2L WET CHEMICAL
7L WET CHEMICAL
• 1A:4F rating
• Wall mounting
bracket included
• 3A:4F rating
• Wall mounting
bracket included
CODE 407678
CODE 402181
Fire Extinguishers should
be inspected at least
once every 12 months.
Lack of maintenance can lead to an extinguisher not
discharging when required, or rupturing when pressurised.
Foam
These extinguishers combine
compressed air with Aqueous Film
Forming Foam (AFFF) to create a
sealing foam blanket over B class
risks such as fuels, spirits and oils. A
foam blanket has a high burn back
resistance which effectively seals off
vapour from the ignition source and
often achieves total containment.
WORKPLACE SAFETY
Wet Chemical
NZ SAFETY CAN ARRANGE TO HAVE REGULAR INSPECTIONS
& SERVICING OF YOUR EXTINGUISHERS AND HOSE REELS.
FOAM
WATER
Water
Air Pressurised Water (APW)
extinguishers contain water and
compressed gas (pressurised air or
gas). NEVER use a water extinguisher
on grease fires, electrical fires or
Class D fires as it will make the flames
spread and get bigger. These are
suitable only for Class A (ordinary
combustibles) fires.
9L FOAM
9L WATER
• 3A:20B rating
• Wall mounting
bracket included
• 3A rating
• Wall mounting
bracket included
CODE 402180
CODE 402179
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
179
FIRE PROTECTION
Smoke alarms
should be replaced
10 years from date
of manufacture and
batteries should
be replaced every
12 months.
406073 4.5kg
406074 9kg
WORKPLACE SAFETY
406075 9kg Truck Mount
EXTINGUISHER CABINETS
Photoelectric (PE)
Respond faster to slow smouldering fires
producing large smoke particles
(eg. smouldering wood, overheating
PVC wiring). These should not be
installed in particularly dusty areas
as they are more susceptible to
contamination from dust and fibres.
406078 4.5kg
• Reduces vandalism and theft
• Extends the recharge life of outdoor
extinguishers from 3 to 5 years
• Surface or recessed installation
• Breakable acrylic window to access
extinguisher, no glass
• Chromium plated brass cylinder lock and
key with weather proof lock cover
• Hammer with retaining cable
406076 9kg + Hose Reel
ION alarms respond quicker to fast
flaming fires producing small smoke
particles (eg. flaming wood and petrol).
406079 9kg
EXTINGUISHER CABINETS
TYPES OF SMOKE ALARMS
Ionisation (ION)
406077 2.3kg
• The perfect indoor and outdoor storage
solution for fire extinguishers and fire
hose reels
• Extends the recharge life of outdoor
extinguishers from 3 to 5 years
• Strong and lightweight plastic design
resistant to most chemicals
• UV resistant
• Rubber seal and polycarbonate windows
INTERIOR DIMENSIONS
(H x W x D)
SUITABLE FOR
406073 625mm x 270mm x 195mm
4.5kg Extinguisher
(pictured)
406074 755mm x 265mm x 195mm
9kg Extinguisher
(pictured)
406075
9kg Extinguisher,
truck mount
(top loading)
CODE
750mm x300m x 300mm
406076 760mm x 530mm x 300mm
9kg Extinguisher +
Hose Reel
A COMBINATION OF ION & PE SMOKE
ALARMS IS RECOMMENDED.
CODE
INTERIOR DIMENSIONS
(H x W x D)
SUITABLE FOR
406077
419mm x 150mm x135mm
2.3kg Extinguisher
406078
513mm x 169mm x 150mm
4.5kg Extinguisher
406079 650mm x 225mm x 200mm
9kg Extinguisher
FIRE HOSE REELS
• Galvanised easy to fit bracket & back pipe
• Brass ball valve lever actioned nozzle
CODE 4
04310 25m x 13mm
404311 36m x 19mm
ACCESSORY
GO TO PAGE
212
FIRE SIGNAGE
FIRE BLANKET
SMOKE ALARMS
• Flashing LED power indicator
• 9V battery
• Low battery indicator alarm
CODE 4
03007 CH946 ionisation
501123 CH307H Photoelectric
180
• Ideal for use on fires involving cooking oils
• Leaves no mess
• Simple to use
• Tough Protective cover
• Pull down tabs provided for ease of use
• 1.2 x 1.8m
CODE 107464
ABE DRY POWDER
EXTINGUISHER SIGN
CODE 402506S 200x400 PVC
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SITE SAFETY - STORAGE
Patentedconcealedself-close
mechanismprovides obstruction free
access to topshelf space. Self-indexing
doors guarantee they will close in
sequence andensure atight closure from
topto bottom(on self-close models).
Roundedsafety corners on doors
reduce accidental nicks or cuts and
potential handinjury.
F usible links holddoors
wide open andmelt at
74˚Cfor automaticclosure
(on self-close models).
Haz-Alert™
reflective labeling
provides high
visibility in the dark
under fire conditions
or power outage
when illuminatedby
aflashlight beam.
Minimal air gaps
provide better
protection.
Double wall thermal barrier.
Sheet steel thickness of
1.2mmwith 40mmwall
spacing.
Stainless
steel, threepoint bullet
self-latching
system
provides
easy, fail-safe,
positivedoor
closurewith
increased
heat
resistance.
Fully welded(not riveted)
construction holds
squareness for longer life,
offeringgreater protection
in afire since air gaps are
reduced.
Continuous piano hinge
provides smooth closure.
uilt-in groundingconnector
B
(on outside side panel) for
easy grounding.
Dual vents with
built-in flame arresters
strategically placedat
bottomandopposite top
are welded, not screwed
in place.
Durable andchemical
resistant, hybridlead-free
powder coat paint finish,
inside andout, retains highgloss look andminimises
the effects of corrosion and
humidity.
Each cabinet has a150mm
deepsumpto contain spills
or leaks within the cabinet.
Weldedshelf hangers
interlock with shelf to
offer maximum‘no slip’
stability, andno flimsy
brackets to lose.
Exclusive SpillSlope™ safety shelves
direct spills to back andbottomof leakproof sump. Heavy-gauge galvanised
steel shelves are bi-directional and
easily adjust on 76mmcenters for
versatile storage.
Adjustable leveling
feet for stability on
uneven surfaces.
Exclusive U•Loc™ Padlockable
Handle. Optional padlock allows for
extrasecurity andkeycodingmultiples
for convenient access. Flush paddle
handle with slip-resistant gripoffers
easy fingertipoperation andreduces
dangerous ‘catches’ frompassing
traffic. Double key set includedfor
keyedlock. Patent Pending.
WORKPLACE SAFETY
Easy close,
self-latchingdoors.
Haz-Alert™ Safety Band. Firefighterfriendly reflective bandat bottom
alerts firefighters when crawlingin
smoke-filledareas. Patent Pending.
ACCESSORY
FMApprovedproducts provide assurance to customers
that they have been objectively testedandconformto the
highest standardfor commercial property loss prevention.
To achieve FMapproval the internal temperature of the
cabinet must not exceed163˚Cduringaten minute fire test.
DOCUMENT STORAGE BOXES
Keep important manuals and papers secure and readily
available to users while protecting them from moisture and dirt.
CODE 402406 Large front opening (red)
402407 Medium A4 top opening (red)
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
402407
181
SITE SAFETY - STORAGE
FLAMMABLE CABINETS
All JUSTRITE
flammable liquids
storage cabinets are:
827103 250L
827101 160L
• Manufactured to and comply
fully with AS/NZS 1940:2004
• Fire tested and comply with FM
Insurance endorsement.
• Designed for
indoor use only.
WORKPLACE SAFETY
827110 350L
CODE
MODEL
VOLUME
(L)
DESCRIPTION
827111 60L
827105 30L
EXTERNAL
DIMENSIONS
H x W x D (mm)
827104 100L
INTERNAL
DIMENSIONS
H x W x D (mm)
WEIGHT
(kg)
EXTRA SHELF
CODE
827110
AU25602
350
3 shelves, 2 doors, 12 x 20 litre drums
1760 x 870 x 870
1650 x 785 x 785
177.8
827166
827103
AU25452
250
3 shelves, 2 doors, 9 x 20 litre drums
1760 x 1100 x 465
1650 x 1020 x 375
142.0
827162
827101
AU25302
160
2 shelves, 2 doors, 6 x 20 litre drums
1230 x 1100 x 465
1120 x 1020 x 375
104.8
827162
827104
AU25748
100
Under bench, 2 shelves, 2 doors
800 x 920 x 565
675 x 830 x 480
86.1
N/A
827111
AU25712
60
Compact, 2 shelves, 1 door
1005 x 595 x 465
890 x 505 x 375
59.0
401377
827105
AU25714
30
Compact, 2 shelves, 1 door
800 x 595 x 465
690 x 505 x 375
45.0
401377
CORROSIVE CABINETS
827106 250L
All JUSTRITE metal
corrosive substance
storage cabinets are:
827107 160L
402405 60L
• Manufactured to and comply fully
with AS/NZS 3780:1994.
• Fire tested and comply with FM
Insurance endorsement.
• Designed for
indoor use only.
827109 30L
CODE
MODEL
VOLUME
(L)
DESCRIPTION
500432 100L
827102 100L
EXTERNAL
DIMENSIONS
H x W x D (mm)
INTERNAL
DIMENSIONS
H x W x D (mm)
WEIGHT
(kg)
EXTRA SHELF
CODE
DROP TRAY
CODE
827106
AU25452B
250
3 shelves, 2 doors, 9 x 20 litre drums
1760 x 1100 x 465
1650 x 1020 x 375
143.8
827162
404297
827107
AU25302B
160
2 shelves, 2 doors, 6 x 20 litre drums
1230 x 1100 x 465
1120 x 1020 x 375
109.8
827162
404297
827102
AU25748B
100
Under bench, 2 shelves, 2 doors
800 x 920 x 565
675 x 830 x 480
86.1
N/A
N/A
402405
AU25712B
60
Compact, 2 shelves, 1 door
1005 x 595 x 465
890 x 505 x 375
59.0
401377
404298
827109
AU25714B
30
Compact, 2 shelves, 1 door
800 x 595 x 465
690 x 505 x 375
45.0
401377
404298
500432
AU24160
100
Polyethylene 2 shelves, 2 doors
890 x 920 x 565
720 x 805 x 475
59.0
N/A
N/A
NOTE: Careful housekeeping is required to ensure no leaks, spills or open containers can cause corrosion to the cabinet. NZ Safety recommend using non-metal
cabinets for fuming acids and aggressive liquids.
182
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SITE SAFETY - STORAGE
405425/405426 140L
PLASTIC
CORROSIVE CABINETS
STORAGE CANS
Ideal for use in laboratories for
storing Class 8 corrosive substances.
•M
ade from plastic so they wont rust
•D
esigned to meet
AS/NZS2243 and AS3780
• Padlockable self-latching door(s)
with storage for small containers
• Adjustable shelves
• F its up to 7 Winchester bottles per shelf
• Liquid-tight bund
405424 70L
TYPE I
STORAGE
CANS
DESCRIPTION
EXTERNAL
DIMENSIONS
H x W x D (mm)
INTERNAL
DIMENSIONS
H x W x D (mm)
WEIGHT
(kg)
18
1 door, 2 shelves,
1 compartment
815 x 530 x 550
745 x 450 x 500
21
140
36
2 doors, 2 shelves,
815 x 1080 x 550 745 x 990 x 500
2 compartments
43
140
36
2 doors, 2 shelves,
815 x 1080 x 550 745 x 990 x 500
1 compartment
43
SPILL
VOLUME
CAPACITY
(L)
(L)
MODEL
405424
CF70
70
405425
CF140
405426
CA140
Designed with a single spout for
both filling and pouring. A counter
balanced ergonomic design offers
gravity-assisted pouring.
CODE 827204 8 Litre
827202 4 Litre
404443
BULK OUTDOOR
CONTAINMENT UNITS
The Chemshed Bulk Outdoor
Store range are made to
comply with HSNO regulations.
These strong, smart-looking
storage units will help ensure
404442
you maintain a safe worksite
and provide an easily
accessible storage location
for all your requirements.
SHELF DISPENSING CAN
7 modular styles to choose from!
All the benefits of a Type 1
storage can with the addition
of a Justrite safety faucet.
405957
CODE
MODEL
DESCRIPTION
EXTERNAL DIMENSIONS
H x W x D (mm)
404442
CS30800
Single lockable door.
Holds up to 21 x 20L containers
2175 x 2300 x 1100
404443
CS301800
Twin opening, lockable doors.
Holds up to 40 x 20L containers
2300 x 2400 x 2275
7 modular
styles to choose
from!
Twin opening,
lockable doors.
405957 CS301900
Holds 2 x IBCs and up to 10 x 20L containers
1900 x 2800 x 1300
CODE 827233 19 Litre
PLUNGER CANS
Helps to quickly moisten
cleaning cloths or swabs.
Pushing down on the brass pump
assembly fills the upper pan with
a measured amount of liquid for
moistening. Surplus liquid drains
back into the reservoir.
WORKPLACE SAFETY
CODE
CODE 8
27234 1 Litre
827212 2 Litre
CYLINDER STORAGE LOCKERS
The ‘no rust’ solution to safely securing LPG
and compressed gas cylinders. Strong, durable,
safe and secure storage to meet your HSNO
requirements. Manufactured to order and
custom made sizes available.
• Sturdy aluminium construction
• 7mm heavy duty mesh & lockable
• Solid roof panels
• Bolt down provisions
• Shipped fully assembled
•C
omplies with AS4332:2004 Storage
and Handling of Gases in Cylinders
CODE 4
06434 23006 406436 23008V 406438 23010 406435 23007 406437 23009 OILY
WASTE
CANS
Essential for ensuring safety
whenever solvent cloths and wiping
rags are used. Foot operated lid
keeps the hazard contained.
CODE 8
27242 23 Litre
401345 38 Litre
NOTE: SIGNAGE SOLD SEPARATELY - SEE PAGE 202
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
183
LABELLING MACHINES
CUSTOMISED LABELS
Print customised
labels in seconds
GLOBALMARK 2
BMP™71 MOBILE PRINTER
WORKPLACE SAFETY
PIPE MARKING IDENTIFICATION
Produce professional quality,
customised labels on demand. No
more minimum order quantities or
lead times - simply print whatever you
like instantly, whenever you need to.
PPE IDENTIFICATION
Investing in a DIY labelling solution
can help your business to save
money, improve productivity and stay
compliant with safety standards.
• One printer for all your labelling needs over 400 tapes and labels to choose from
• Large, full colour display screen and
QWERTY keyboard
• Easy to load smart chipped labels and ribbons
• Both kits includes software to enable design
on your PC
The BMP™71 portable printer is designed
to help you get the job done faster and
more efficiently. The BMP™71 printer shows
you exactly what your label will look like as
you’re creating it – so there’s no guesswork.
Stop wasting materials on ‘test labels’ and
start saving time and money by creating the
label right the first time. With built-in design
wizards for general and safety identification,
electrical and voice/data comm, asset
management, barcode technology and
storage space for over 100,000 label files, this
printer can cut your label design time in half.
CODE 4
06081 BMP71 kit with Labelmark software (Asset ID applications)
406080 BMP71 kit with Markware software (lean applications)
RIBBONS
50mm x 23m
BMP™71 MOBILE PRINTER
NOTE: BMP71 kit includes hard case, charger/
AC adaptor, 1 roll of white die cut labels, 1 black
ribbon, roll adaptor, USB cable, quick start guide
and CD with software, printer
driver and user guide.
• Adheres to most clean, dry surfaces
• Conforms well to irregular, curved or
rough surfaces
• Stands up to grease, oil and
most industrial chemicals
• Five year average outdoor durability in
temperatures from -40° to +80°C
(under certain conditions)
• Tape can be applied as low
as -18°C
• Length 15m
184
COLOUR
13MM
White
CODE 4
06176 Globalmark 2 Multi Colour & Cut Printer
406177 VALUE PLUS PACK 104mm x 61m Black Ribbon 100mm x 30m White Vinyl Tape Extra 12 Month Warranty
406178 100mm x 61m Black Ribbon
406179 100mm x 61m White Ribbon
406180 100mm x 61m Red Ribbon
406181 100mm x 61m Blue Ribbon
406182 100mm x 61m Green Ribbon
406183 200mm x 100mm x 61m Black/Red Ribbon
406184 400mm x 100mm x 61m Black/Yellow Ribbon
406185 200mm x 100mm x 61m Black/Yellow Ribbon
406186 400mm x 100mm x 61m Black/Orange Ribbon
406187 100mm x 30m Indoor/Outdoor Vinyl Tape White
406188 100mm x 30m Indoor/Outdoor Vinyl Tape Yellow
406189 100mm x 30m Indoor/Outdoor Vinyl Tape Red
406190 100mm x 30m Indoor/Outdoor Vinyl Tape Blue
ACCESSORIES
CODE 4
06090 Black
406093 White
406098 Magenta 406095 Blue
406094 Red 406097 Yellow
406096 Green
BMP™71 INDOOR/OUTDOOR
VINYL TAPE
Create your own custom signs, labels,
pipemarkers, tags and more on demand
with this easy to use, industrial label printer.
Never before has an industrial-grade
make-it-yourself printer empowered you to do
so much with little more than your index finger.
Brady’s advanced touch-screen technology,
powered by a Microsoft Windows™ CE
operating system, makes producing
professional labels fast and simple.
• Up to 100mm media width
• 300dpi
• Multi-colour
• 11 ribbon colours and 14 vinyl tape colours
• Tapes use aggressive adhesive that sticks to
a wide variety of surfaces
25MM
COLOUR
13MM
25MM
50MM
406102 406120 406136
Black
406107
406125
406141
Yellow
406103 406121
406137
Grey
406108
406126
406142
Green
406113
406149
Tan
406117
406132
406148
Red
406104 406122 406138
Brown
406109
406127
406143
Light Blue
406118
406131
406147
Gold
406110
406128
406144
Blue
406105
406123
406139
Purple
406111
406129
406145
Orange
406106
406124
406140
Clear
406112
406130
406146
406119
50MM
CODE 4
06082 Quick charger
406083 Hard case
406084 Soft case
406085 Power adaptor
406086 Battery pack
406087 USB cable
406088 Cleaning kit
406089 Handimark label roll adaptor
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SITE SAFETY - SAFETY WASHES
AERATED EYE/FACE WASHES
SPEAKMAN EYESAVER ®
SE-480
SE-475
SE-400
• Wall-mounted
• Push-hand operated
• No bowl
• Wall-mounted
• Push-hand operated
• Stainless steel bowl
CODE 827006
CODE 827004
SPEAKMAN
• Pedestal
mounted
• Freestanding
• Push-hand
and foot
operated
• Stainless
steel bowl
Aerated eye/face
washes
CODE 827007
AERATED EYE WASHES
SE-575
SE-582
• Wall-mounted
• Push-hand operated
• No bowl
• Wall-mounted
• Push-hand operated
• Stainless steel bowl
CODE 827010
CODE 820289
• Pedestal
mounted
• Freestanding
• Push-bar
and foot
operated
• Stainless
steel bowl
All Speakman Eyesaver ® designed
eye/face washes are engineered to
provide a fast cleaning, low velocity
first aid curtain of aerated water that
washes eye and face contours gently.
NOTE: Units require uninterrupted
water source, preferably no less than
20mm, with minimum flowing pressure
of 136kPa and flow rate of 36 LPM.
CODE 820288
Aerated eye washes
EYE WASH/
DRENCH HOSE
- SE-927
DRENCH
HOSE SE-920
SE-505
• Wall-mounted
• Push-bar operated
• Stainless steel bowl
CODE 827012
• Wall-mounted on hook
• Lever operated
• S ingle aerated spray head
• 1.8m hose
CODE 8
27022
410945 Replacement Eye Piece (Each)
• Bench-mounted
• Optional wall
mount bracket
• Lever operated
with stay open valve
• Twin aerated spray heads
• 1.8m hose
CODE 8
27024
406009 Wall mount bracket
410945 Replacement Eye Piece (Each)
NON-AERATED EYE/FACE WASH UNIT
GO TO PAGE
145
LABORATORY
SPILL KITS
EYE WASH - SE-572
• Bench-mounted
• Push-hand operated
• Twin aerated spray heads
• 90 degree swivel on
discharge arm
CODE 820512
410945 Replacement Eye Piece (Each)
All Speakman Eyesaver ® designed
eye washes are engineered to
provide two streams of low velocity
aerated water that gently washes
both eyes. Aerated water provides
a peroxide scrubbing action that
removes contaminants from delicate
soft membrane areas more efficiently
and safely.
WORKPLACE SAFETY
SE-546
NOTE: Units require uninterrupted
water source, preferably no less than
15mm, with minimum flowing pressure
of 136kPa and flow rate 12 LPM.
Non-aerated
eye/face wash unit
Non-aerated units should only be
considered when water pressure is
so low that an aerated model would
not operate.
NOTE: Units require uninterrupted
water source, preferably no less than
15mm, with minimum flowing pressure
of 50kPa.
PEM-490
• Wall-mounted
• Push-hand operated
• Stainless steel bowl
CODE 827008
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
185
SITE SAFETY - SAFETY WASHES SPARE PARTS
4
STANDARDS
404355
18
Aerator screen assembly with cap
3
401405
Summary of
AS4775:2007 –
emergency shower
and eye wash
equipment
GENERAL
• Flushing fluid should be tepid
(check with medical advisor for
optimum temperature).
5
Aerator screen assembly
5
501197
SHOWER
SE-220
SHOWER
SE-607
SE-603
SE-685
SE-616
SE-675
SE-227
SE-253
3
Complete shroud assembly
402689
WORKPLACE SAFETY
• Equipment should be tested weekly
to verify proper operation and
inspected annually to ensure
AS4775:2007 compliance.
• All emergency equipment needs to
be connected to a supply that will
allow for a minimum of 15 minutes
of operation.
• All emergency equipment is
required to be third party certified
for compliance to the AS4775:2007
Standard.
• Combination unit components
should be capable of operating
simultaneously eg. shower and
eye wash.
EYE AND EYE FACE WASHES
• Eye wash – minimum flow of 1.5
litres per minute.
Shroud repair kit
1 A&B
2
A&B
12
10
6
EYE/FACE WASH
SE-607
SE-603
SE-685
SE-475
SE-400
SE-480
• Eye/face wash – minimum flow of
11.4 litres per minute.
EYE WASH
SE-505
SE-546
SE-616
9
13
17
14
1 A&B
7
EYE WASH
SE-582
SE-575
SE-675
15
• Nozzles protected from airborne
contaminates.
• Provide flushing fluid to both eyes
simultaneously.
8
• At a velocity low enough to be
non-injurious.
• Simple operation – ‘off to on’ in one
second or less.
• Height from standing surface
838mm to 1143mm.
•M
inimum operating pressure – 210 kPa.
• Hands-free operation once activated.
SHOWERS
• Minimum flow of 75.7 litres per minute.
• Simple operation – ‘off to on’ in one
second or less.
• Height from standing surface
2083mm to 2438mm.
• Pattern: 508mm diameter at
1524mm above standing surface.
• Centre of spray located 406mm
from any obstruction.
• Minimum supply pipe size – 25mm.
• Hands-free operation once activated.
16
Ref Number
1A
1B
2A
2B
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
NOT PICTURED
NOT PICTURED
186
11
1
Description
Aerator Screen Assembly & Cap (1)
Aerator Screen Assembly (1)
Complete Shroud Assembly (1)
Shroud Repair Kit (1)
Pull Rod Assembly
Activation Ball Valve and Lever
Shower Head 200mm ABS Cycolac
Activation Valve & Hand Flag Handle
Foot Pedal Connection Cable
Foot Pedal Activator Assembly
In Line Strainer Assembly
Nozzle Base and Tube Assembly (1)
Activation Push Bar Assembly (incl dust shields)
Dust Shield Assembly (2)
Activation Ball Valve
Volume Flow Control
Eye Wash Assembly Complete (inc. 1A, 1B, 17)
Activation Valve and Flag Handle
Dust Cover ‘Flow Off’ (1)
Activation Ball Valve and Lever 25mm
Weekly Test Tag (10 pack)
Freeze Protection Valve
Fitting fee/kit required
Shower Tester
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
Part Number
05 1177
G05 0384
G10 0042
G10 0041
SA 02008
SE 911H
SE 870
SE 910V
SA 03014
SA 03001
G21 0082
G42 0087
G04 0215
10 0227
20 0929
G20 1720
SA 01003
SE 910H
SA 01008
SE 911V
SE TAG
SE HAT-FP
SE 950
CODE
404355
401405
501197
402689
404351
404356
860646
827025
404350
404353
501083
404352
404342
404348
404343
404349
404354
404345
404347
404346
406513
402560
408565
406514
SITE SAFETY - SAFETY WASHES
DELUGE SHOWERS
SPEAKMAN LIFESAVER ®
SPEAKMAN
Deluge showers
SE-253
All Speakman Lifesaver ®
showerheads are non-clogging,
self-cleaning and can be supplied
to fit any application. The impeller
action of these heads distributes
floods of water without voids in
the shower pattern that ensures
complete body coverage for faster
decontamination.
CODE 807974
SE-253 PO
• Free-standing
• Step-on platform
operated
• Stay-open
ball valve
CODE 8
27030
(not pictured)
SE-227
SE-220
• Wall-mounted
• Pull down arm
• Stay-open ball valve
• Ceiling-mounted
• Pull down arm
• Stay-open ball valve
CODE 827000
CODE 808148
NOTE: Units require an uninterrupted
water source, preferably no less
than 25mm, with minimum flowing
pressure of 130kPa and maximum
static pressure of 860kPa.
COMBINATION DELUGE SHOWERS WITH EYE/FACE WASHES
SE-607
Combination
deluge shower
and aerated
eye/face wash.
• Stainless
steel bowl
Combination
deluge showers with
eye/face washes
• Hand
and foot
operated
CODE 8
60647
(pictured)
SE-603
Combination deluge
shower and aerated
eye wash.
• Stainless steel bowl
• Hand operated
CODE 827014 (not pictured)
SE-685
SE-616
Combination deluge
shower and aerated
eye/face wash.
• Hand operated
Combination deluge
shower and aerated
eye wash.
• Stainless steel bowl
• Push-bar operated
CODE 827016
CODE 827020
SE-675
Combination deluge
shower and aerated
eye wash.
• Hand operated
CODE 802507
• High efficiency
spray heads
• 79 litre capacity
CODE 827026 SE-4000
501110 A
ntimicrobial Solution 60ml
NOTE: Units require an uninterrupted
water source, preferably no less
than 25mm, with minimum flowing
pressure of 130kPa and maximum
static pressure of 860kPa.
Portable eye washes
PORTABLE EYE WASHES
GRAVITYFLO™
EYE WASH
The simple solution when both a
deluge shower and eye/face wash is
required in the same location. Each
unit is floor-mounted and supplied
with a 25mm stay-open full-flow ball
valve, activated by a triangle pull
rod. The eye/face wash is supplied
with a 15mm stay-open full-flow ball
valve, activated by paddle handle,
push bar or foot pedal. Custom
options can be made to order.
WORKPLACE SAFETY
• Free-standing
• Pull down arm
• Stay-open
ball valve
PRESSURIZED
PERSONAL WASH
For those working in remote
locations where plumbed systems
are not available.
• Stainless steel cylinder
• 9 litre capacity
• Single aerated nozzle
CODE 404301 SE-509
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
187
SITE SAFETY - SALINE EYEWASH
TOBIN EYEWASH
Tobin eyewash
products
Simple effective design offers a first
line of defence against eye injuries.
Chemical substances can cause
irreversible damage to the eye within
seconds, so eyewash stations should
be positioned within close reach of
hazardous locations. Designed and
manufactured in Sweden.
5 BOTTLE STERILE SALINE
WALL STATION
WORKPLACE SAFETY
• Wall station with five x 1 litre
eyewash bottles
• Provides a total of 15 minutes wash time,
which is the recommended period for
chemical eye injuries
• Contains 0.9% sterile saline solution
• Attachment screws included
• Dimensions: 39cm x 45cm x 10cm
2 BOTTLE STERILE SALINE
WALL STATION
• Wall station with two x 1 litre
eyewash bottles
• Provides a total of six minutes wash time
• Contains 0.9% sterile saline solution
• Attachment screws included
• Dimensions: 39cm x 20cm x 10cm.
Applications: Suitable for emergency
treatment in all work areas where there is
a risk of foreign material or debris entering
the eye.
Applications: Suitable for emergency
treatment in all work areas where there is
a risk of foreign material or debris entering
the eye.
CODE 4
04234 Wall station with bottles
403612 Sterile saline replacement bottles box of 5
CODE 403611 Wall station with bottles
404235
Sterile saline replacement
bottles box of 2
FEATURES:
• S uperior to tap water for
emergency eye care.
• Nozzle design ensures a soft flow
over the eye at a continuous
rate. This is important to avoid
damaging the injured eye.
• Eye support ring to facilitate
prolonged washing.
• B ottles are tamper resistant and
have a non-refillable design to
guarantee sterility.
188
2 BOTTLE STERILE SALINE
WALL CABINET
• Wall cabinet with two x 1 litre eyewash
bottles
• Keep your Tobin eyewash bottles
protected in tough environments
• Easily accessible with the Tobin one-hand
access mechanism
• Provides a total of six minutes wash time
• Contains 0.9% sterile saline solution
• Attachment screws included
• Dimensions: 39cm x 20cm x 10cm
2 BOTTLE STERILE SALINE
VEHICLE STATION
• Mobile stand with two x 1 litre
eyewash bottles
• Contains 0.9% sterile saline solution
• Suitable for vehicle use
• Provides a total of six minutes wash time
• Attachment screws included
• Dimensions: 34cm x 20cm x 10cm
Applications: Suitable for emergency
treatment in all work areas where there is a risk
of foreign material or debris entering the eye.
Applications: Suitable for use by mobile
workers for emergency treatment where
there is a risk of foreign material or debris
entering the eye.
CODE 4
08012 Wall station with bottles
404235 Sterile saline replacement bottles box of 2
CODE 4
04236 Vehicle station with bottles
404235 Sterile saline replacement bottles box of 2
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SITE SAFETY - SALINE EYEWASH
TOBIN EYEWASH
Chemicals in the
eye can cause
serious damage
within 1-5 seconds.
Eye washing that begins within a
few seconds can be decisive in
minimising eye damage. Tobin’s
eyewash systems are a well proven,
quick and safe way to wash
chemicals from the eyes.
• Wall station with two x 1 litre eyewash bottles
• Containing buffered solution with a neutralising
effect on alkali and acidic chemicals
• Provides a total of six minutes wash time
• Attachment screws included
• Dimensions: 39cm x 20cm x 10cm
Applications: Suitable for all industries and
worksites where there is a risk of chemical
eye injuries. Including laboratories, cement
industries, paper industries, construction sites,
charging stations for forklifts and warehousing.
CODE 408013 PH neutralising buffer solution wall station
408014
PH neutralising buffer
solution replacement
bottles box of 2
STERILE SALINE POCKET
EYEWASH BOTTLE
• 200ml portable bottle.
• Contains 0.9% sterile saline solution
• Suitable as a first line of defence until the
injured person can be helped to a primary
eyewash device.
Applications: Suitable for personal issue
in all workplaces where there is a risk of
foreign material or debris
entering the eye.
CODE 404233
YOU MAY ALSO BE
INTERESTED IN:
GO TO PAGE
144
MOBILE
SAFETY
STATION
A DAMAGED EYE MUST NOT BE
WASHED WITH A HARD/SHARP JET
• T obin’s bottle is constructed to
empty under natural pressure,
giving a soft flow.
• T he eye is washed by a soft flow
consisting of six tiny streams.
•W
hen the bottom air vent is
opened a patient cannot increase
the flow by squeezing the bottle.
Important Tobin
Safety Features
NO MECHANICAL PARTS
The blow moulded bottle has no
moving parts or mechanical parts
which can malfunction. The bottle is
simple to open and easy to use.
NON-REFILLABLE BOTTLE
Sterile liquid must not be saved in an
open bottle. The bottle is designed
to stop people saving unused liquid
or refilling the bottle with other liquid.
This protects the integrity of the saline
solution in Tobin eyewash bottles.
A safe sterile eyewash container must
not be re-used.
UNINTERRUPTED WASHING OVER
A LONG PERIOD IS PARTICULARLY
IMPORTANT
WORKPLACE SAFETY
2 BOTTLE PH NEUTRALISING BUFFER
SOLUTION WALL STATION
• A 1 litre bottle gives approximately
3 minutes washing time.
• T he Tobin 5 bottle system gives
approximately 15 minutes of flow.
EASILY TRANSPORTED
•B
ottles can easily be removed
from a stand and taken along
during transportation to a doctor.
BOTTLE REPLACEMENT
An unopened bottle can be
removed or replaced in the Tobin
stand at will. An open bottle cannot
be replaced in the stand.
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
189
SITE SAFETY - LONE WORKER
WORKPLACE SAFETY
Lone workers don’t have to be alone with
man-down/lone worker tracking.
If you have workers who operate machinery and
equipment on their own, we can provide a wirelesstechnology system that enables an alarm to be raised if
they require assistance.
The EkoTek system, for example, will provide two-way
messaging to convey a wide range of critical information,
such as: man-down alarm, worker location tracking, on-site
security and production line alerts.
So no matter what the duress and lone worker requirements are, and no
matter what environment the solution is needed for, Tellen Integrated
Solutions can assist – and provide installation, training and support.
RESCUE ME
LOCATOR BEACON
• Included with product is the
form to register with the Rescue
Coordination Centre of Maritime NZ
• When activated, the PLB1 transmits
the unit’s position and ID details to
the Rescue Coordination Centre
• The PLB1 works with the recognised
worldwide search and rescue
satellite network, Cospas Sarsat.
This is funded by governments,
and there is no charge to use this
service anywhere
RESCUEME LAND/SEA PERSONAL
LOCATOR BEACON - PLB1
• Satellite link to emergency services; homing
beacon; high intensity strobe light
• On sea or land the PLB1 can be activated
at the push of a button
• Very light and small size:
75mmHx51mmWx32.5mmD
• Waterproof to 15m
• 7 year battery life
• 7 year warranty
CODE 410555
190
GAS OPERATED FOG HORN
This extremely loud fog horn is powered by a
gas bottle and is easy to use in all conditions.
CODE 1
53439 Complete fog horn
153438 Gas horn refill
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SITE SAFETY - CIVIL DEFENCE
CIVIL DEFENCE KITS
DISASTER SURVIVAL KIT
Provides the essentials for survival at home or for
personal use in the workplace, to be used alongside a
civil defence cabinet or wheelie bin kit. This emergency
grab-kit contains essentials for survival at home or for
personal use in the workplace.
For more information on disaster preparation visit
www.getthru.govt.nz
Contents:
• Drink bottle • Dyno-torch/radio
• Water purification tablets • 12 hour light stick
• Emergency whistle • Multi-tool
• P2 Respirators (3) • Leather gloves
• Hand cleaning wipes • First aid kit
• Re-usable bucket with lid
Is your workplace
prepared for an
emergency?
The Health and Safety in Employment
Act 1992 and amendments state that
there is a requirement to look after
your staff during an emergency, this
includes Civil Defence emergencies.
CODE 407016
Many Occupational Health and
Safety practitioners are now
recommending that workplaces
have a store of food for their staff
for 72 hours.
T his Emergency grab-kit contains equipment to assist you in
a major emergency
NOTE: The St John compact first aid kit is recommended and
designed to fit in the front pocket (Code 407546 page 356).
Contents:
• Foldable drink container
• Dyno-torch/radio
• 50 x Water purification tablets • 2 x 12 hour Light stick • 14 in 1 Multi-tool
• 3 x P2 respirator
• Gel hand sanitizer
• 3 x rubbish bags
• Rope - 15m
• Safety vest
• Emergency whistle
• 1 x pr Leather gloves
• Duct tape
• Toilet paper
CODE 550537
St John reserves the right to amend/change the contents if there are guideline and/or availability changes.
One cabinet per level of a multi-level
building or per 100 staff members
is recommended.
CIVIL DEFENCE WHEELIE BIN KIT
• Based on civil defence equipment guidelines issued by the Ministry of Civil Defence and
Emergency Management.
• Kits available in three different sizes; 1-10, 1-15 and 1-25 person per site or per level in a
multi-storey building
• Contents include items for survival and rescue as well as food supplies designed to last for
three days
• It is recommended that the kits be supplemented with water supplies equivalent to nine litres
per person (three day supply).
See page 193 for kit contents
WORKPLACE SAFETY
ST JOHN EMERGENCY GRAB-KIT
NOTE: Equipment and training
specifications are for generic risks
and therefore the purchase of
equipment should be based on a
site-specific hazard assessment
and comprehensive business
continuity planning.
FURTHER INFORMATION ON
EMERGENCY PREPAREDNESS FOR
BUSINESSES CAN BE FOUND AT
CIVILDEFENCE.GOVT.NZ
CODE 4
07012 1-10 Person
407013 1-15 Person
407014 1-25 Person
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
191
WORKPLACE SAFETY
SITE SAFETY - EMERGENCY EQUIPMENT
EMERGENCY FOOD
THREE DAY RATIONS
SONY
TRANSISTOR
RADIO
EMERGENCY SAFETY WHISTLE
• Purpose designed for survival situations
• This product has a 5 year shelf life
• It provides 3 days of emergency food rations
for one person
• Contains all the nutrients required for survival
• AM/FM 2-band reception
• Analogue tuner
• LED tuning indicator
• Earphone jack
• Telescopic antenna
• 120dB sound output
•3
-chambered design with waterproof pea so
that it will not be affected if exposed to water
• ABS plastic construction
• Safety orange colour
CODE 406422
CODE 406414
CODE 407652
DYNAMO TORCH
• Aquatabs kills water borne organisms that
cause stomach upsets and diarrhoea,
making water safer for drinking
• Each tablet will treat one litre of water
• 50 pack
• Battery free dynamo powered flashlight
• Combines FM radio, alarm, led flashlight and
emergency cell phone charger into one
• No external power source required, simply
wind up to make it work
• Cell phone charge lead supplied with torch
fits standard nokia© or similar phone sockets
CODE 720712
CODE 406421
AQUA TABS PURIFICATION TABLETS
EMERGENCY LIGHT STICKS
• Provides up to 8-12 hours of illumination
• Non toxic, no heat or spark, waterproof
and windproof
• Hook & gate top for attachment
CODE 1
02156 Green
102148 Yellow
102091 Blue - 8 hours
102121 Red
102237 White - 8 hours
102113 Orange
YOU MAY ALSO BE
INTERESTED IN:
GO TO PAGE
253
WARDEN
BIB VEST
LARGE CIVIL DEFENCE CABINET
GO TO PAGE
195
TORCHES
196
BATTERIES
• Emergency smash glass for immediate
access to key
• Finished in international civil defence
orange colour for easy identification
• Hard wearing powder coated finish
• Wide opening doors allow easy access
to contents
• Civil defence decals on both doors
• Constructed from zinc coated steel to
protect from damage, fire & vandalism
• Three point locking system
• Adjustable shelves for storing contents
• Room for board stretcher & ladder
• Inverted base for rope storage
• Dimensions: 2054mm high x 1000mm wide x 463mm deep
NOTE: When ordering please ensure that lift or stairway access is sufficient for this 2050mm high cabinet.
LET US HELP YOU SELECT PRODUCTS THAT ARE APPROPRIATE FOR YOUR WORKPLACE
CODE 720674
* Cabinet excludes contents
192
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SITE SAFETY - CIVIL DEFENCE
Choose from standardised
Civil Defence emergency kits or customise
to your requirements.
720674
Large civil defence cabinet
Wheelie bin 120 litre
Wheelie bin 240 litre
Acrylic blankets
Blanket – foil, hypothermia rescue sheet
Quarter-fold stretcher
11.5mm Kernmantle rope
Dolphin torch
6V Dolphin lantern battery
Dolphin spare bulb
Stokogel hand sanitizer 237ml pump pack
Plastic bags for sanitation, pack of 100
Tarpaulin
Aluminium ladder
Radio AM/FM 4 Pack AA batteries for radio (energizer alkaline)
5 litre water containers (supplied empty)
Water purification tablets, pack of 50
Wrecking bar
Multi-purpose saw
Hacksaw
Hacksaw blades, pack of 10
Sledge hammer
Carpenters hammer
Safety knife
Pliers
Standard axe
Civil defence first aid kit
Gloves – leather palm, cotton back
Dust masks, pack of 100
Goggles – NZS 919
Hard hat (NZ standard), orange
Hard hat chipstrap
Safety whistle
Disposable ear plugs (pk of 4 pairs)
Ear plugs (pk of 10)
Disposable latex glove (pk of 100)
Duct tape – fabric, silver, 48mm x 55m
10 litre plastic bucket
Toilet rolls, 6 pack
Sanitary pads, pack of 16
4-In-1 dynamo torch
Light sticks green – 12-hour duration
Ration pack, 1 person 3-day supply
400866
781622
703834
404251
404039
403803
403806
403829
177504
720704
406415
720615 406414
E91BP4 720623 720712
720534
406413
720569
720577 720585 406412
500177
720593
720607 721093L
LCF5A
405357
1010L 410
210951L
407652/408081
408745
405553
122106
406416
406417
406515
406420
406421
102156
15-PERSON
KIT
25-PERSON
KIT
1
3
10
2
2 x 20m
4
4
4
1
1
2
1
2
2
3
3
1
1
1
1
1
1
1
1
one per 25 staff
8
1
8
8
8
8
1
1
5
5
20
1
4
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
2
1
2
2
1
1
2
10
1
5
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
2
1
2
2
2
3
1
2
2
2
1
2
10
1
5
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
1
1
1
1
4
1
4
4
4
5
1
2
2
2
3
3
10
one per person
10
15
25
1
6
one per rescue team member
one per rescue team member
1
1
one per rescue team member
one per rescue team member
1
1
1
1
1
2
2
407012
407013
407014
WORKPLACE SAFETY
DESCRIPTION
400865
10-PERSON
KIT
CIVIL DEFENCE CABINET
MINIMUM REQUIREMENTS
CODE
FOOD ITEMS
406422
ADDITIONAL ITEMS (RECOMMENDED) 720631
500540
404038
409866
D47NZ
116572
153439
405070
405071
185957L
185337L
187585S
167495
Blanket, wool mix (recycled wool)
Spine board with straps
10m x 11.5mm kernmantle rope
Overalls – red polycotton (other colours available)
Safety vest – orange or yellow – hi viz
Restricted area barrier tape, 300m roll
Gas foghorn
PVC waterproof parka, yellow,
PVC trousers for parka (above)
Evacuation procedure sign
Assembly point sign
Civil defence sign, self adhesive 200mm x 200mm
Head warden vest
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
193
SITE SAFETY - HEADLIGHTS
INTRINSICALLY SAFE
PETZL PIXA 3
WORKPLACE SAFETY
ENERGIZER INTRINSICALLY SAFE
• LED, 75 lumens, 15 hour runtime,
60m beam distance
• Certified IECEx Class 1, Group 1, Division
1; ingress protection rating IP64
• Light pivots; flip-up lens diffuses spot to
area light
• Four light modes: high and low white
beam, red for night vision, green for
inspection
• Uses Eveready Max batteries – 3 x AAA,
refer code 404242 (4 pk)
• Multi-beam for close range, movement,
and long range work
• Three settings: 30, 40 and 50 lumens
• Immersible in water; test standard 30 mins
at 1m depth
• ATEX certification for potentially
explosive environments
• 2 x AA batteries included
• Mixed-beam for close range and movement
• Two settings: 30 and 40 lumens
• Immersible in water; test standard 30 mins
at 1m depth
• ATEX certification for potentially
explosive environments
• 2 x AA batteries included
CODE 410309
CODE 404874
ENERGIZER 7 LED ADVANCED
PETZL PIXA 2
• LED, 2 settings (high/low), 14-30 lumens, 1947 hour run time
• 28m beam distance
• Intrinsically safe – IECEx Certified
• IPX4 water splash resistant
• Includes cloth and rubber strap to fit
hard hats
• 3 x AAA alkaline batteries
(included)
• LED, 70 lumens, 14 hour runtime,
100m beam distance
• Four light modes: high and low white beam,
red for night vision, green for inspection
• Uses Eveready Max batteries – 3 x AAA,
refer code 404242 (4 pk)
CODE 407826
CODE 405345
PELICAN 2610 HEADS-UP LITE
ENERGIZER PROFESSIONAL
• Seven LEDs: 5 white, 2 red
• 58 lumens on flood, 14 hour runtime on
flood,
• Weatherproof and water splash resistant
• Four light modes: spot, flood, full and
night vision
• 3 x AAA batteries included
CODE 404996
CODE 407825
PETZL PIXA 1
ENERGIZER 5 LED
• For close range work, 25 lumens
• Immersible in water; test standard 30 mins
at 1m depth
• ATEX certification for potentially
explosive environments
• 2 x AA batteries included
• Five LEDs, 3 white, 2 red
• 130 lumens, 24 hrs runtime, 70m beam distance
• Light Modes: Full-high, Full-low, Spot high,
Spot low, Flood high, Flood Low
• Shatterproof lens, IPX4 Weatherproof
• 3 x AAA batteries included
CODE 407135
CODE 411366
PELICAN 2690 HEADS-UP LITE
• LED, 60 lumens, 10.5 hours run time,
81m beam distance
• Intrinsically safe – IECEx Certified
• IPX7 – immersible in water for 30 minutes at
depth of 1 metre
• Easy to use Rotary bezel switch
• Includes cloth and rubber strap to fit
hard hats
• 3 x AAA alkaline batteries
(included)
DANGER - FLAMMABLE GAS
NO SMOKING NO NAKED FLAMES
CODE 410310
CODE 182249L 380x280 PVC
ENERGIZER 4 LED
• Four LEDs: 3 white, 1 red
• 40 lumens on spot, 19 hour runtime on spot
• Weatherproof and water splash resistant
• Two light modes: spot and night vision
• 3 x AAA batteries included
CODE 404995
194
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
SITE SAFETY - TORCHES
INTRINSICALLY SAFE
HARD CASE PROFESSIONAL SWIVEL
• LED, 100 lumens, 47 hour runtime
• Tough, waterproof, floats
• Survives 2.1m drop test
• Uses Eveready 1409 Dolphin 6v battery,
refer code 403806
• LED, 70 lumens, 5.5 hour runtime
• Head rotates through 125 degrees;
87m beam distance
• Survives 6m drop test
• Four light modes: high and low white beam,
red for night vision, green for inspection
• Uses 2 x Energizer Max AA batteries,
refer code 402298 (4 pk)
CODE 403803
CODE 404876
DOLPHIN MK6
ENERGIZER INTRINSICALLY SAFE
• LED, 2D: 60 lumens, 135 hour runtime;
2AA: 65 lumens, 21 hour runtime
• Certified IECEx Class 1, Group 1, Division 1; ingress protection rating IP67
• Body: anti-static chemical-resistant
polypropylene
• Large glove-friendly operating button
• Use Eveready Max batteries:
2D – 2 x D, refer code E95BP2 (2 pk);
2AA – 2 x AA, refer code E91BP4 (4 pk)
CODE 4
04244 2D
404243 2AA
DOLPHIN MINI/MICRO
• LED: Mini 34 lumens; Micro 23 lumens
• Tough, waterproof, floats
• Survives 2.1m drop test
• Use Eveready Max batteries:
Mini – 2 x D, refer code E95BP2 (2 pk);
Micro – 2 x AA, refer code E91BP4 (4 pk)
CODE 4
03802 Mini
403804 Micro
HARD CASE PROFESSIONAL INSPECTION
• LED, 40 lumens, 1.25 hour runtime
• Compact, light-weight, 38m beam distance
• Survives 4.6m drop test
• Uses 2 x Energizer Max AAA batteries,
refer code E92BP4 (4 pk)
CODE 404875
• ABS resin construction,
ideal for harsh environments
• LED, 21 lumens, 4 hour run time, 51m
beam distance
• Intrinsically safe – IECEx Certified
• IPX7 – immersible in water for 30 minutes
at depth of 1 metre
• 2 x AAA alkaline batteries
(included)
CODE 4
10300 Yellow
410301 Black
PELICAN
2010 SABRELITE
HARD CASE PROFESSIONAL
ENERGIZER RECHARGEABLE
• LED spotlight, 110 lumens, 12 hour recharge,
4 hour runtime
• Long distance 385m beam
• Survives 2.1m drop test
• Comes with car & AC charger
• LED Spotlight, 150 lumens high mode,
55 lumens low mode
• Run Time: 19 hrs high mode, 58 hrs low mode.
• Beam Distance: 235m
• Survives 3m drop test
• Weatherproof – ANSI FL1 IPX4
CODE 403815
CODE 411045
• ABS resin construction, ideal for
harsh environments
• LED, 109 lumens, 32 hour run time,
144m beam distance
• Intrinsically safe – IECEx Certified
• IPX7 – immersible in water for 30 minutes
at depth of 1 metre
• 3 x C alkaline batteries (not included)
• Optional Photo-luminescent
shroud
WORKPLACE SAFETY
PELICAN
1965 MITYLITE
CODE 4
10304 Yellow
410305 Black
PELICAN
2410 STEALTHLITE
MAGLITE ALUMINIUM
ENERGIZER RECHARGEABLE
• Long lasting LED torch, 30 lumens
• Virtually unbreakable
• Uses Energizer AA batteries,
refer code 402298 (4 pk)
CODE 404249
• LED bulb
• Output: 2D – 134 lumens; 3D – 131 lumens
• Runtime: 2D – 8 hour; 3D – 79 hour
• Use Energizer Max D batteries,
refer code E95BP2 (2 pk)
CODE 4
07684 2D
407685 3D
• ABS resin construction,
ideal for harsh environments
• LED, 126 lumens, 7.5 hour runtime,
161m beam distance
• Intrinsically safe - IECEx Certified
• IPX7 - immersible in water for 30 minutes
at depth of 1 metre
• 4 x AA alkaline batteries (included)
• Optional photo-luminescent
shroud
CODE 4
10306 Yellow
410307 Black
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
195
SITE SAFETY AREA LIGHTING/BATTERIES
ENERGIZER/EVEREADY LANTERNS
(6V)
ENERGIZER INDUSTRIAL ALKALINE
WORKPLACE SAFETY
CODE 4
03417 AA 24 pack
403416 AAA 24 pack
403415 C 12 pack
403414 D 12 pack
403413 9V 12 pack
• Energizer 529 Alkaline for high power
demand/frequent use
• Eveready 1409 Carbon-Zinc; longer lasting
for Eveready Mk6 Lantern
• Eveready 1209 Super Heavy Duty
Carbon-Zinc for moderate power
demand/frequent use
CODE 4
05346 529
403806 1409
102709 1209
LIGHT STICKS
ENERGIZER MAX ALKALINE
• Long lasting dependable power utilising
Power Seal Technology
• Recommended for items used frequently:
torches, remote controls etc
CODE E
91BP2 AA 2 pack
E91BP4 AA 4 pack
E92BP2 AAA 2 pack
E92BP4 AAA 4 pack
E93BP2 C 2 pack
E95BP2 D 2 pack
E522BP1 9V 1 pack
ENERGIZER 3-IN-1 LIGHT
• Three way LED: area light; directional light –
hand-held or tripod
• Area light: 150 lumens, up to 100 hour
runtime. Directional light: 100 lumens,
10 hour runtime
• Pivoting head; easily dimmable
• 4 AA batteries included
CODE 411043
ENERGIZER ULTIMATE LITHIUM
CODE 1
02156 Green
102148 Yellow
102091 Blue
102121 Red
102237 White
102113 Orange
ENERGIZER 3-IN-1
LANTERN
• Very long lasting for high powered devices:
digital cameras, portable computer
devices etc
• Performs in extreme temperatures:
-40°C to 60°C
• Compact 360 deg LED
pop-up lantern
• 150 lumens, up to 100 hour
runtime (on low mode)
• Rubberised handle for easy
carrying/hanging
• 4 AA batteries included
CODE 4
11048 AA 2 pack
403486 AA 4 pack
411049 AAA 2 pack
411047 AAA 4 pack
411050 9v 1 pack
CODE 411044
PELICAN
PROGEAR WORK LIGHT 9420XL
ENERGIZER RECHARGE EXTREME
• For long runtime per charge on
high-drain devices
• Hold charge for up to 1 year when not in use
• Batteries supplied ready-to-use
CODE 4
02296 AAA 2 pack
404242 AAA 4 pack
402297 AA 2 pack
402298 AA 4 pack
402315 9v 1 pack
402295 8 hour charger for above
196
• Convenient emergency lighting;
waterproof, windproof
• Provides up to 12 hours illumination
• Safe: non toxic; no heat or spark
• Hook and gate top for attachment
• Portable twin LED light with swivel head and
tripod (to 1.5m)
• Quality Cree LED’s 50,000 hours
• IP54 – Dust and water resistant
• 2 settings, high 1000 lumens (2 hours),
low 500 lumens (4 hours)
• 2 x lithium Ion batteries with 2 hour quick
recharge time
• Wide 58 degree beam spread
• Kit includes: hard carry case, shoulder
strap, charging station for 240V &
12V in-vehicle adaptor
YOU MAY ALSO BE
INTERESTED IN:
GO TO PAGE
159
SPRAYWELL
DAY & NIGHT
GLOW MARKER
CODE 4
11414
411415 Replacement battery
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
CLEAN WORKPLACE - WIPING SOLUTIONS
DISPENSERS
WYPALL* X50 SINGLE SHEET 4208
WYPALL* X50 SINGLE SHEET 4209
Can replace waste rag or tea towels, wet or dry
use, superior wet strength from polyester scrim,
hygienic for food preparation, white
24cm x 42cm, 75 wipers/pack, 8 packs/carton,
refer single sheet dispenser 92170.
Can replace waste rag or tea towels, wet or
dry use, superior wet strength from polyester
scrim, hygienic for food preparation, blue
24cm x 42cm, 75 wipers/pack, 8 packs/carton,
refer single sheet dispenser 92170.
SINGLE SHEET
WIPER DISPENSER 92170
CODE 500390
CODE 401766
CODE 405891
KRESTO KWIK WIPES
WYPALL* X50 POP-UP 4204
Can replace waste rag or tea towels, wet or
dry use, superior wet strength from polyester
scrim, hygienic for food preparation, white
24cm x 42cm, 160 sheets/box, 4 boxes/carton,
refer wall mounted dispenser 4906.
CODE 4204
WYPALL* X50 SINGLE SHEET 4201
Can replace waste rag or tea towels, wet or
dry use, superior wet strength from polyester
scrim, hygienic for food preparation,
white 34.5cm x 49cm, 400 sheets/carton,
refer single sheet dispenser 4927.
Textured wipes for cleaning off dirt, grease
and grime; convenient when a sink is not
available; for use on tools and surfaces as
well as skin.
CODE 4
03809 Canister of 40
403810 Canister of 70
177547 Canister of 130
WALL MOUNTED DISPENSER 4906
Suits WYPALL X50 pop-up
wipers 4204.
CODE 4906
WYPALL* X50 SINGLE SHEET
4202/4199
Can replace waste rag or tea towels, wet or
dry use, superior wet strength from polyester
scrim, hygienic for food preparation,
32.5cm x 49cm, 250 wipers/carton,
refer single sheet dispenser 4927.
CODE 4201
CODE 4
01764 White
4199 Blue
WYPALL* X50 LARGE ROLL
4197/4193
WYPALL* X50
SMALL ROLL
4198/4194
Can replace waste rag or tea towels, wet or dry
use, superior wet strength from polyester scrim,
hygienic for food preparation, 49cm x 70m,
3 rolls/carton, refer large roll dispenser 4917.
Can replace waste rag or tea towels, wet or dry
use, superior wet strength from polyester scrim,
hygienic for food preparation, 24.5cm x 70m,
4 rolls/carton, refer small roll dispenser 4915.
CODE 4
197 White
4193 Blue
CODE 4
198 White
4194 Blue
WORKPLACE SAFETY
Suits WYPALL X50 single sheet wipers
4208, 4209.
SINGLE SHEET WIPER
DISPENSER 4927
Suits WYPALL X50 single sheet wipers
4201, 4202, 4199.
CODE 401767
LARGE/SMALL ROLL
DISPENSERS 4917/4915
4917 for WYPALL X50 large roll wipers;
4915 for WYPALL X50 small roll wipers.
CODE 4
917 Large
4915 Small
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
197
CLEAN WORKPLACE - WIPING SOLUTIONS
DISPENSERS
WYPALL* X80 JUMBO ROLL 94173
Suits WYPALL* X80 jumbo
wipers 94173.
Heavy duty perforated wipers, highly absorbent,
free from contaminants unlike waste rags, white
31cm x 34.5cm, 540 wipers/roll, 1 roll/carton,
refer to Jumbo Roll Dispenser 4951.
CODE 500547
CODE 406226
WORKPLACE SAFETY
JUMBO ROLL DISPENSER 4951
WYPALL* X80 SINGLE SHEET 94176
Suits WYPALL* heavy duty cloth wipers
4155, 4157.
Highly absorbent, free from contaminants
unlike waste rags, white 31.5cm x 42.5cm,
150 wipers/carton, refer brag box
dispenser 4920.
CODE 500548
CODE 500617
BRAG BOX DISPENSER 4920
100% polypropylene, surface-treated for superior
water absorbency, blue 42cm x 34.5cm,
40 wipers/box, 4 boxes/carton.
CODE 4130
KIMTECH EPIC WIPERS 4155/4157
100% polypropylene, can absorb 4 times its
own weight in oil, size 42cm x 34.5cm.
Blue: 250 wipers/box; White: 150 wipers/box;
refer brag box dispenser 4920.
CODE 4
155 Blue
4157 White
WYPALL*
REGULAR DUTY CLOTH WIPERS
94142/94148/94152/94162
ROLL WIPER DISPENSER 4926
Suits WYPALL* cloth wipers 94142, 94148,
94152, 94162.
CODE 4926
HEAVY DUTY ROLL WIPER
DISPENSER 4928
Suits WYPALL* heavy duty cloth wipers
94159, 94161.
CODE 105716
198
KIMTECH KIMTEX POP-UP WIPERS
4130
Suitable for wide range of cleaning tasks,
colour coded for task segregation, reduced risk
of cross-contamination, size 34cm x 45cm,
106 wipers/roll, 6 rolls/carton, refer roll
dispenser 4926.
CODE 5
00551 Green 94142
500552 Yellow 94148
4152 Blue 94152
4162 Red 94162
KIMTECH WETTASK* WIPERS 06001
Dry wipers that can be pre-moistened with
solution or chemical of your choice,
white 30.5cm x 31.8cm, 60 sheets/pack,
6 packs/carton.
CODE 404909
WYPALL* HEAVY DUTY CLOTH
WIPERS 94159/94161
KIMTECH WETTASK WIPERS 06411
Suitable for demanding cleaning tasks, size
30cm x 46cm, 107 wipers/roll, 4 rolls/carton,
refer roll dispenser 4928.
Dry wipers that can be pre-moistened with
solution or chemical of your choice, white
30.5cm x 31.8cm, 90 sheets/pack,
6 packs/carton.
CODE 1
05724 Blue 94159
500554 Green 94161
CODE 404910
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
CLEAN WORKPLACE - WIPING SOLUTIONS
WIPING SOLUTIONS
TORK MULTI PURPOSE CLOTHS &
INDUSTRIAL WIPING PAPER - FOLDED
• Tough and durable; disposable; alternative
to high-grade rags
• Absorb oil, grease and water
• All clean cut sheets except 440 Advanced
3 ply which is perforated
CODE 4
04381 Cleaning Cloth, White, 1 ply, sh 420x380
404812 Industrial Cleaning Cloth, Grey, 1 ply, sh 420x380
404376 Heavy Duty Cleaning Cloth, White, 1 ply, sh 640x380
405911 Industrial Heavy Duty Wiping Paper, Blue, 3 ply, sh 320x380
SCOTCH-BRITE™ HEAVY DUTY
SCOURING PAD #86
Designed for heavy duty use. Made with
tough fibres, abrasives and resin, evenly
distributed to ensure consistent performance.
Pad can be used wet or dry. Sold as each
(90 pads/carton).
CODE 86HP
Finding the right
wiping solution
Once we understand the nature of
your wiping task, we can advise on
the best wiping solution for you.
• What size wiper does the task require?
• Is the need for singe-use or
multi-use wiping?
• Is there a need for specific
properties such as heat-resistance
or solvent release?
TORK MULTI PURPOSE CLOTHS &
INDUSTRIAL WIPING PAPER - ROLLS
• Handy roll alternative to sheets
CODE 4
04382 Cleaning Cloth, White, 1 ply, 400 sh: 320x380
404379 Heavy Duty Cleaning Cloth, White, 1 ply, 280 sh: 320x380
406337 Industrial Heavy Duty Wiping Paper, Blue, 3 ply, 350 sh: 340x230
SCOTCH-BRITE™ MEDIUM DUTY
SCOURING PAD #96
High performance long-life pad for everyday
use in commercial and industrial environments.
Ideal for cleaning pots, cooking utensils, bench
tops and metal surfaces. Pack of 10 pads
(10 packs/carton)
CODE 402678
TORK FOLDED WIPER/CLOTH
DISPENSER - W4
• Easy to wall mount
• Dispenses single folded sheets to
reduce waste
CODE 406474
SCOTCH-BRITE™ SCRUB SPONGE #74
NIAGARA™ GENERAL PURPOSE
HANDPAD #96
Dual-action green cleaning pad/yellow
sponge works well on walls, tables,
fixtures, countertops and floors.
20 sponge/carton.
Designed for medium duty, general purpose
use. Made from high quality fibres, mineral
and resin. Long lasting, non-rusting and resilient
synthetic pad. Pack of 20 pads.
CODE 405642
CODE 403482
WORKPLACE SAFETY
DISPENSERS
TORK FLOOR
& WALL STANDS - W1
• Available as wall mount or mobile
floor stand
• Robust and stable construction
• Easy to load; safe and reliable tear-off
CODE 4
06471 Wall mount
406470 Mobile stand
SCOTCH-BRITE™
EASY ERASING PAD #4004
Effective cleaning tool used to remove marks
and stains from various surfaces. Cleans
many surfaces without additional chemicals,
just use water. Pad will not scratch glass,
ceramic tiles, fiberglass, porcelain, metal,
marble, stainless steel, plastic, vinyl and
most wall coatings. 4 pads/bag,
3 bags/carton.
CODE 408151
EAGLE GENERAL PURPOSE
SCOURING PAD
Designed for general purpose use.
Robust premium scour can be used in
food preparation, medical and industrial
environments. Carton of 100 pads.
TORK MAXI CENTREFEED
DISPENSER - W2
• For easy access and fast, safe dispensing
• Wall mount
CODE 406472
CODE 401250
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
199
CLEAN WORKPLACE - CLEANSERS/DETERGENTS
SIMPLE GREEN ALL PURPOSE CLEANER
SIMPLE GREEN SUPREME
HEAVY DUTY
SIMPLE GREEN CRYSTAL
(FOOD GRADE)
• High performance degreaser/cleaner
concentrate
• Cuts through grease, dirt, sap, pollution,
insect residue, oils, animal fats
• Non-toxic, non-corrosive, non-flammable
and biodegradable; rinses residue-free
• High performance degreaser/cleaner
concentrate; no added colour or fragrance
• Approved for use at export-registered meat
and meat product sites
• Non-toxic, non-corrosive, non-flammable
and biodegradable; rinses residue-free
CODE 4
09895 5L bottle
409896 20L drum
CODE 4
11426 (3.78L)
411427 (20L)
SIMPLE GREEN STAINLESS STEEL
CLEANER
CYCLONE CLEANER DISINFECTANT
• Highly effective degreaser and grime remover
• Suitable for floors and general purpose
cleaning
• Ready to use
• High-tech formula protects & cleans
• Non-toxic, non-corrosive,
non-flammable
• Commercial grade; cleans, deodorises and
sanitises all washable surfaces
• Suitable for use as a spray and wipe
• Leaves a pleasant pine fragrance
CODE 411428 5L bottle
CODE 405861 946ml trigger bottle
CODE 409782 5L bottle
CYCLONE FRESH PINE
TOILET CLEANER
CYCLONE PREMIUM BLEACH
• General purpose cleaner/de greaser/
deodoriser concentrate
• Non-toxic, non-corrosive, non-flammable
and biodegradable
• Rinses residue-free
WORKPLACE SAFETY
CODE 4
11422 (650ml)
411423 (946ml)
405858 (3.78L)
411424 (20L)
411425 (208L)
CYCLONE AMMONIATED
FLOOR/GENERAL CLEANER
• Liquid: for an efficient hand wash;
lemon fragrance
• Tablets: effective stain removal; dishes and
glasses spotless and streakfree
• Actively kills germs and removes difficult stains
• Commercial grade disinfection for toilets
• Leaves a pleasant pine fragrance
• Multiple business uses
• Removes moss and mould
• Laundry use: add to wash or remove stains
by soaking
CODE 409783 5L bottle
CODE 409784 5L bottle
CODE 4
09824 5L bottle - liquid
409785 Pack - 80 tablets
SIMPLE GREEN GLASS CLEANER
SLAY FLY SPRAY
• Twice the enzyme power in every gram
• Heavy duty
• Non toxic and ammonia-free
• Keeps glass and other reflective surfaces
shiny and streak-free
CODE 4
11429 6kg front loader
411430 6kg top loader
CODE 4
01699 946ml trigger bottle
405917 2L refill
• Commercial strength; kills both flying and
crawling insects
• Virtually odourless, dry and non-staining
• Completely safe
PERSIL 2X LAUNDRY CONCENTRATE
200
SUN DISHWASHING
CODE 173967 550ml aerosol
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)