drapery hardware - Designers Resource
Transcription
drapery hardware - Designers Resource
drapery hardware Is Drapery Hardware the finishing touch or the final straw in your design projects? Robert Allen makes it a pleasure to shop for Drapery Hardware with this all-in-one resource of 16 superb collections This catalog offers the perfect drapery hardware for all your clients’ lifestyles. Traditional, modern and novelty styles are interpreted with artistry and innovation. Internationally inspired rod and finial designs are meticulously crafted in metal, wood, crystal and mirrored glass. Customization options are multiplied by a wide range of finishes. Every piece is backed by Robert Allen’s trusted reputation for quality and service. And every single item you need to complete your window treatment is included. You don’t need to go anywhere else for your Drapery Hardware needs. Just contact the experts at Robert Allen and every question will be answered. What could be easier? drapery hardware WOOD table of contents Bedpost page 10 Chess page 14 Traditions page 18 Parisian page 22 Architrave page 26 Toscana page 30 Provence page 34 Country Iron page 38 Forged Iron page 42 Ferraforte page 46 Metropolitan page 50 Casual Elegance page 54 Costume page 58 Al Fresco page 62 Polynesian page 66 NOVELTY METAL DECORATIVE Classic page 06 Index OTHER WAYS TO SHOP Alphabetically by Collection page 70 by Lifestyle page 71 by Finish page 72 by Material page 74 Glossary page 75 Traversing FAQ page 76 Measurements/Installation page 78 Classic 00 www.robertallendesign.com Early American furniture styles evoke a sense of historical craftsmanship. Turned and hand carved pieces come to life with a range of time-worn, stain finishes. FEDERAL FINIAL PEMBROKE FINIAL DUNLAP FINIAL NEWPORT FINIAL CHESTER FINIAL CLASSIC END CAP 4.5"L, 3.75"H 6.25"L, 3.25"H 4"L, 3.5"H 3.5"L, 2.75"H 6.5"L, 2.75"H 1.375"L, 2.5"H Facing Page: finial: Pembroke, Maple rod: 1.75" Standard, Maple bracket: Standard, Maple rings: Standard, Maple fabric panel: Patsy Lane, Cascade All items are shown in the Antique Walnut finish. Classic 07 STANDARD BRACKET projects 3.5", 4.25" base height EXTENDED BRACKET projects 5.125", 4.25" base height FINISHES Antique Walnut STANDARD ROD 1.75" width available in 4', 6' and 8' lengths Distressed Oak Mahogany Maple 08 www.robertallendesign.com RINGS for 1.75" rods HARDWARE FEATURES • All hardware is available in all finishes • Color variation in the finishes may vary from piece to piece; it is to be expected and appreciated • 1.75" rod width is available in 4', 6' and 8' lengths • A center support is recommended on any rod lengths 8' or greater WAND 40" L Classic 09 Bedpost 00 www.robertallendesign.com Simple style. Handsome beech and pine hardwoods are turned and hand carved into the shapes of traditional country finials and furniture knobs. Rich stains are worked into the grain to reveal a natural strength of character. URN FINIAL KNOB FINIAL 3"L, 2.5"H 4.5"L, 2.5"H GLOBE FINIAL BULB FINIAL TOP FINIAL 4.25"L, 3.5"H END CAP 3.75"L, 2.5"H 4.25"L, 3"H PINECONE FINIAL SMALL 4.25"L, 2.5"H available for 1.25" and 1.75" rods Extends 1" from rod when installed PINECONE FINIAL LARGE 5.25"L, 3"H Facing Page: finial: Globe, Walnut rod: 1.75" twirl rod, Walnut fabric panel: Sweet Meadows, Maize fabric ties: Alfino, Straw All items are shown in the Mahogany finish. Bedpost 11 STANDARD BRACKET projects 3.5", 4.5" base height EXTENDED BRACKET INSIDE MOUNT BRACKET projects 5.5", 4.5" base height available for 1.25" and 1.75" rods DECORATIVE BRACKET available for 1.25" and 1.75" rods, 2.75" base height Bracket may be cut for any extension between 4" and 9.25". Use a fine tooth saw and a miter box to obtain a straight cut. FINISHES a. Cherry b. Country White a. PLAIN RODS: available in 1.25" and 1.75" widths; 4' and 8' lengths b. TWIRL RODS: available in 1.25" and 1.75" widths; 4' and 8' lengths Mahogany Pine To adjust rod length, please follow general installation instructions for shortening wood rods. Walnut 12 www.robertallendesign.com BUTTON TIEBACK 6" extension, 3.5" diameter HARDWARE FEATURES RING 1.75" diameter for 1.25" rods 2.25" diameter for 1.75" rods • All hardware is available in all finishes • Color variation in the finishes may vary from piece to piece; it is to be expected and appreciated • 2 Rod widths: 1.25" and 1.75" are available in plain and twirl styles; both styles are available in 4' and 8' lengths • A center support is recommended on any rod lengths 8' or greater • The pine finish is achieved with real pine wood; random, naturally occurring knots will appear in all items Bedpost 13 Chess 00 www.robertallendesign.com Old world chess pieces carved from fine materials are reinvented in a grand scale. Extensive finishing techniques, with gold and silver leaf, enhance the beauty of these art forms. ROOK FINIAL QUEEN FINIAL CASTLE FINIAL KNIGHT FINIAL KING FINIAL PAWN END CAP 6"L, 4.25"H 7"L, 4.5"H 7.625"L, 4.25"H 7"L, 5.25"H 7.5"L, 4"H 1.875"L, 2.75"H SECONDARY ROD END CAP 1"L, 1.25"H Facing Page: finial: King Finial, Driftwood rod: Standard Rod, Driftwood fabric: Nantucket, Oyster trim: Strie Braid, Linen All items are shown in the Watermark Silver finish. Chess 15 ADJUSTABLE BRACKET projects 10.5" SECONDARY ROD BRACKET ADJUSTABLE TRAVERSE BRACKET projects 10.5" ELBOW CONNECTOR for 2.25" rods projects 3.5" FINISHES a. Driftwood b. Mahogany c. Old World Gold made with authentic gold leaf a. STANDARD RODS 2.25" available in 4', 6' and 8' lengths b. SECONDARY RODS 1.125" available in Antique Gold metal finish Watermark Silver made with authentic silver leaf 16 www.robertallendesign.com c. TRAVERSE RODS 2.25" available as single or double track system KING HOLDBACK 8.5"L, 4" width, 5" projection Above Photo: finial: Rook Finial, Mahogany rod: 2.25" C-ring Double Traverse Rod, Mahogany sheer: Lovely Linen, Pebble trim: Embellished Tassels, Linen fabric: Dali, Tobacco PREMIUM TRAVERSE SYSTEM FEATURES STANDARD RINGS C-RINGS for 2.25" rods 2.75"L, attaches to traverse glide Premium, single and double track, center-draw traverse rod systems are available in 4', 6' and 8' lengths. • Heavy-duty aluminum tracks are of the highest quality. • Superior strength performance. Maximum fabric weight: 6 pounds per foot. • Tracks are powder-coated inside and out in a brown finish, and sealed with a factory-applied dry-lubricant. This patented finishing technique allows for smooth operation and effortless glide of drapery across the rod. Premium hand-draw system includes 2.25" wood rod, aluminum track and clear acrylic wand. Track is fitted with Klick glides (14 with 4', 22 with 6' and 28 with 8'), left and right master carriers, end caps, and 3" aluminum wall brackets with 2.5" projection (3 for 4' and 6', 4 for 8'). The double tracks have 6" brackets. Traverse double bracket projects 5.5" for the front track and 1.75" for the back track. Premium C-RING hand-draw system includes same as above, but track is instead fitted with c-ring glides and master carriers and includes decorative resin c-rings (16 with 4', 24 for 6' and 32 with 8'). PREMIUM CORDED TRAVERSE SYSTEM includes 2.25" wood rod and aluminum track. Track is fitted with Klick glides (14 with 4', 22 with 6' and 28 with 8'), left and right master carriers, right-side cord control with 6' cord drop, mounted cord pulley, and 3" aluminum wall brackets with 2.5" projection (3 for 4' and 6', 4 for 8'). The double tracks have 6" brackets. Traverse double bracket projects 5.5" for the front track and 1.75" for the back track. Premium C-RING CORDED TRAVERSE SYSTEM corded traverse Secondary rod rings for 1.125" rod; available in Antique Gold metal finish WAND 40"L system includes same as above, but track is instead threaded with c-ring glides and master carriers and includes decorative resin c-rings (16 with 4', 24 with 6' and 32 with 8'). HARDWARE FEATURES • 2.25" Standard rod available in 4', 6' and 8' lengths • Secondary rod width: 1.125"; available with standard metal rings • Hand-draw and corded traversing rods available in 2.25" with the choice of a single or double track system • Hand-carved wood finials with resin and wood components • A center support bracket is recommended on any rod lengths 8' or greater Chess 17 Traditions 00 www.robertallendesign.com Famous American estates with iconic architectural features and interior motifs have influenced these designs. Elegant carvings and statuesque finishes promote the sensibilities of luxurious living. VERNON FINIAL VANDERBILT FINIAL WINTERTHUR FINIAL BILTMORE FINIAL MONTICELLO FINIAL HEARST FINIAL 5.25"L, 3.375"H 5.75"L, 3.75"H 3.625" L, 2.75"H 6.5"L, 4"H 5.75"L, 4"H 7"L, 4.375"H END CAP 1.875"L, 3"H Facing Page: finial: Biltmore, Bronze rod: Fluted 2.25", Bronze panel fabric: Modern Mix, Java trim: Antiqued Cord, Tortoise All items are shown in the Bronze finish. Traditions 19 STANDARD BRACKET projects 3.5", 4.5" base height EXTENDED BRACKET WAND projects 6", 4.5" base height 36"L RINGS for 2.25" rods LEAF HOLDBACK (left) 4.25" projection, 4" width, 1.75" base width RIBBED HOLDBACK (right) 4.5" projection, 4" width, 1.75" base width Hardware Features • All hardware is available in all finishes • Color variation in the finishes may vary from piece to piece; it is to be expected and appreciated • 2.25" rod width is available in 4', 6' and 8' lengths • A center support is recommended on any rod lengths 8' or greater 20 www.robertallendesign.com FLUTED ROD: 2.25" width available in 4', 6' and 8' lengths FINISHES IN-STOCK FINISHES These five, in-stock finishes are available for all finials, rods, and components. Platinum Gilded Bronze Walnut w/Gold Ebony CUSTOM FINISH OPTIONS Choose from one of 10 additional finishes that have been selected to complement the design aesthetic of this elegant collection. An additional charge applies to these finishes and lead times vary from 2-4 weeks for shipment. Strike off samples will be provided for approval upon customer request. Silver w/Gold Silver w/Black Wipe Cappuchino Soft Gold Walnut w/Black Flat Black w/Gold Ivory w/Umber Rub Venetian Gold Bronze w/Copper Statuary Bronze CUSTOM FINISH PROGRAM Send us a sample of your favorite finish and we will match it! You can also specify any Sherwin-Williams paint color and we can match that too! Additional charges apply for this service and will be quoted based on custom paint costs. Lead times vary from 3-6 weeks for shipment. Strike off samples will be provided for approval upon customer request. Traditions 21 Parisian 00 www.robertallendesign.com Wrought iron fences. Floral garlands. Polished marble accents. Inspired by the city of lights, this collection combines classic styles with whimsical designs to make a sophisticated statement at the window. CHATEAU FINIAL TRELLIS FINIAL ARBOR FINIAL GARLAND FINIAL COURTYARD FINIAL ACANTHUS FINIAL 1.5" and 2.25" diameter small 3.625"L, 4"H large 5.375"L, 6"H 1.5" and 2.25" diameter small 5.125"L, 3.625"H large 7.125"L, 5"H 1.5" and 2.25" diameter small 4.75"L, 3.375"H large 7"L, 5"H 1.5" and 2.25" diameter small 5.25"L, 3.75"H large 6.625"L, 4.75"H 1.5" and 2.25" diameter small 4.75"L, 3.25"H large 7"L, 4.75"H 1.5" and 2.25" diameter small 5.625"L, 3"H large 7.25"L, 3.875"H Cafe Limestone SECONDARY ROD END CAP .75" secondary rod ACANTHUS END CAP 1.5" and 2.25" diameter small 1"L, 1.5"H large 1.5"L, 3.25"H Facing Page: finial: Marquee, Vintage Gold rod: 1.5" Fluted Rod, Vintage Gold fabric: Buenos Aires, Meringue Slate MARQUEE FINIAL 1.5" and 2.25" diameter small 5.125"L, 3.625"H large 7.125"L, 5"H Marble finial finish: Cafe (available in Walnut and Vintage Gold), Limestone (available in Oak), and Slate (available in Mahogany). All items are shown in the Vintage Gold finish. Parisian 23 STANDARD BRACKET 1.5" bracket projects 3.625" 2.25" bracket projects 4" GARLAND BRACKET 1.5" bracket projects 3.625" 2.25" bracket projects 4" INSIDE MOUNT BRACKET available for .75", 1.5" and 2.25" rods STANDARD DOUBLE BRACKET 1.5" double bracket projects 4.625" for the front rod and 2.375" for the back rod ELBOW CONNECTOR available for .75", 1.5" and 2.25" rods GARLAND DOUBLE BRACKET 2.25" double bracket projects 5.25" for the front rod and 2.375" for the back rod TRAVERSE ROD CONNECTOR Use with the double ended screw to conceal seam and connect rods. C-rings will not pass over the connector. FINISHES a. Mahogany b. Oak c. Vintage Gold d. Walnut a. STANDARD RODS: 1.5" and 2.25" available in 4', 6' and 8' lengths b. SECONDARY RODS: .75" Secondary rods c. FLUTED RODS: 1.5" and 2.25" d. TRAVERSE RODS: 2.25" standard or fluted traverse rods. Available as single or double track system 24 www.robertallendesign.com ACANTHUS TIEBACK 4.25" projection, 4.5" width, 1.5" base width ARBOR TIEBACK 4.25" projection, 4.5" width, 1.5" base width Above Photo: finial: Arbor, Walnut rod: 2.25" Double Traverse Standard Rod, Walnut sheer: Shanagarry, Lilac fabric: Sasha Velvet, Twig PREMIUM TRAVERSE SYSTEM FEATURES STANDARD RINGS for 1.5" and 2.25" rods GARLAND RINGS 1.5" and 2.25" diameters Premium, single and double track, center-draw traverse rod systems are available in 4', 6' and 8' lengths. • Heavy-duty aluminum tracks are of the highest quality. • Premium traverse system includes either a fluted or standard rod. • Superior strength performance. Maximum fabric weight: 6 pounds per foot. • Tracks are powder-coated inside and out in a brown finish, and sealed with a factory-applied dry-lubricant. This patented finishing technique allows for smooth operation and effortless glide of drapery across the rod. Premium hand-draw system includes 2.25" wood rod, aluminum track and clear acrylic wand. Track is fitted with Klick glides (14 with 4', 22 with 6' and 28 with 8'), left and right master carriers, end caps, and 3" aluminum wall brackets with 2.5" projection (3 for 4' and 6', 4 for 8'). The double tracks have 6" brackets. Traverse double bracket projects 5.5" for the front track and 1.75" for the back track. Premium C-RING hand-draw system (standard or garland) includes same as above, but track is instead fitted with c-ring glides and master carriers and includes decorative resin c-rings (16 with 4', 24 for 6' and 32 with 8'). C RINGS for use with 2.25" traversing rods SECONDARY ROD RINGS for use with .75" secondary rods PREMIUM CORDED TRAVERSE SYSTEM includes 2.25" wood rod and aluminum track. Track is fitted with Klick glides (14 with 4', 22 with 6' and 28 with 8'), left and right master carriers, right-side cord control with 6' cord drop, mounted cord pulley, and 3" aluminum wall brackets with 2.5" projection (3 for 4' and 6', 4 for 8'). The double tracks have 6" brackets. Traverse double bracket projects 5.5" for the front track and 1.75" for the back track. Premium C-RING CORDED TRAVERSE SYSTEM (standard or garland) corded traverse system includes same as above, but track is instead threaded with c-ring glides and master carriers and includes decorative resin c-rings (16 with 4', 24 with 6' and 32 with 8'). HARDWARE FEATURES WAND 40"L • 2 Rod widths: 1.5" and 2.25"; available in 4', 6' and 8' lengths • Secondary rod width: .75"; available with standard metal rings • Hand-draw and corded traversing rods available in 2.25" with the choice of a single or double track system with standard or fluted rod • Resin finials and components with fluted or standard wood rods • A center support is recommended on any rod lengths 8' or greater Parisian 25 Architrave 00 www.robertallendesign.com The Architrave Collection is derived from classical Greco-Roman architecture using natural elements such as acorn, acanthus leaf and pomegranate as complementary design forms. Finishes have a distressed, time -worn look which enhance their appeal. PINO FINIAL POMEGRANATE FINIAL AXIS FINIAL TURBAN FINIAL VASE FINIAL CALIZ FINIAL 1" diameter 4"L, 3"H 1" diameter 5.75"L, 4"H 1.5" diameter 5.5"L, 4"H 1.5" diameter 5.25"L, 3"H QUATREFOIL FINIAL 1.5" diameter 7.25"L, 6.25"H 1.5" diameter 5"L, 3"H 1.5" diameter 8.25"L, 5.5"H END CAP All items are shown in the Antique Gold finish available for 1" and 1.5" rods Facing Page: finial: Vase, Antique rod: 1.5" Traverse One-Way Draw Kit, Antique brackets: 1.5" Traverse brackets, Antique fabric: Passion Leaves, Truffle Architrave 27 FLORAL ROSETTE 2" diameter (shown on Extended Bracket) STANDARD BRACKET EXTENDED BRACKET 1" and 1.5" projects 3.5" 1" and 1.5" projects 5.5" RADIUS ROSETTE 2.25" diameter (shown on Standard Bracket) note: no illustration INSIDE MOUNT BRACKET available for 1" and 1.5" rods CORNER ANGLE TRAVERSE BRACKET 1" diameter (2.75"L) 1.5" diameter (4"L) 1" brackets project 3.5" 1.5" brackets project 3.75" FINISHES a. Antique b. Earth Rust c. a. RODS: 1" and 1.5" standard rods Antique Gold available in 4" and 8' lengths 12"L rod connectors are available for 1" and 1.5" diameter rods TRAVERSE ROD KITS available in 4' and 8' lengths Available in one-way draw and center draw traverse options Watermark Silver b. ONE WAY DRAW c. CENTER DRAW To adjust rod length, please follow general installation instructions for shortening metal rods 28 www.robertallendesign.com RADIUS TIEBACK 4.25" diameter, 3.5" extension FLORAL TIEBACK 2.75" diameter, 3.5" extension SHORT POST- MALE 2"L, 1.5" diameter To be used as a shorter projection post for tiebacks. SHORT POST- FEMALE 2.4"L, 1" diameter To be used with rosettes for decorative posts. Photo Above: finial: Vase, Antique rod: 1.5" Traverse One-Way Draw, Antique brackets: 1.5" Top-mount brackets, Antique fabric: Passion Leaves, Truffle HAND-DRAW TRAVERSE SYSTEM FEATURES • Hand-draw traverse kits available in 4' and 8' lengths. • One-way draw and center draw traverse options available. • Hand-draw traverse adds the utility of full drapery movement across the entire rod due to specially-designed top-mount brackets. • 1" rod includes nylon glides, 1.5" rod includes roller glides with ball bearings. • 1" traverse rod cannot be used with finials. They can only be utilized with end caps or with inside mounts. ONE-WAY DRAW TRAVERSE KIT includes RINGS 1.5" diameter for 1" rods 2" diameter for 1.5" rods • Aluminum traverse rod, 16 glides for 4' and 32 for 8', 1 master carrier with overlap arm, aluminum, top-mount brackets (2 for 4', 3 for 8'), and 2 end stops. • One-way draw features reversible master carrier arm so that draw can either be from the left side or the right side. CENTER DRAW TRAVERSE KIT includes • Aluminum traverse rod, 16 glides for 4' and 32 for 8', pair of master carriers with overlap arm and standard arm, aluminum, top-mount brackets (2 for 4', 3 for 8'), and 2 end stops. • Center draw features reversible master carrier arms (standard and overlap) so that overlap can be left over right or right over left. HARDWARE FEATURES WAND 40"L • All hardware is available in 4 finishes: Antique, Antique Gold, Earth Rust and Watermark Silver • Color variation in the finishes may vary from piece to piece; it is to be expected and appreciated • 2 Rod widths: 1" and 1.5"; available in 4' and 8' lengths • A center support is recommended on any rod lengths 8' or greater Architrave 29 Toscana 00 www.robertallendesign.com Sculptural forms and the gracefully aged finishes of Toscana reflect the textured country landscapes and frescoes of the Italian palazzi. PIAZZA FINIAL BELLA FINIAL CAMPAGNA FINIAL SAXON SMALL FINIAL SAXON LARGE FINIAL FIRENZE FINIAL 1.5" diameter 4.5"L, 3"H 1.5" diameter 4.25"L, 3"H 1.5" diameter 4.5"L, 3"H LOGGIA FINIAL 2" diameter 5"L, 3"H 1.5" diameter 6.5"L, 4.5"H 2" diameter 5.5"L, 3.5"H 2" diameter 5.5"L, 4"H END CAP available for 1.5" and 2" rods Facing Page: finial: Loggia, Sienna rod: 2" Rope Rod, Sienna rings: 2.5", Sienna fabric: Waltrip, Caper All items are shown in the Italian Gold finish. Toscana 31 STANDARD BRACKET 1.5" bracket projects 4.25" 2" bracket projects 4.5" EXTENDED BRACKET INSIDE MOUNT BRACKET 1.5" bracket projects 6" 2" bracket projects 6.25" available for 1.5" and 2" rods SWING ARM .5" diameter, 27.5"L CORNER ANGLE available for 1.5" rod only (4"L) FINISHES a. Antique b. Earth Rust a. PLAIN RODS 1.5" and 2" Plain rods available in 4' and 8' lengths Italian Gold b. ROPE RODS 1.5" and 2" Rope rods available in 4' and 8' lengths To adjust rod length, please follow general installation instructions for shortening metal rods. Limestone Sienna 32 www.robertallendesign.com ROSETTE TIEBACK 4.5" extension 3.25" Diameter FLORAL TIEBACK 4.5" extension 4" Diameter HARDWARE FEATURES RINGS 2" diameter for 1.5" rods 2.5" diameter for 2" rods • All hardware is available in all finishes: Antique, Italian Gold, Earth Rust, Sienna and Limestone • Color variation in the finishes may vary from piece to piece; it is to be expected and appreciated • 2 Rod widths: 1.5" and 2" are available in Plain and Rope styles in 4' and 8' lengths • Rope rod is wood; Plain rod is metal • A center support is recommended on any rod lengths 8' or greater WAND 40"L Toscana 33 Provence 00 www.robertallendesign.com A Euro-Country look is created by shaping iron into graceful curves and elegant scrolls. Finishes are carefully layered for a feeling of antiquity and color depth. FLEUR DE LYS FINIAL ARROW FINIAL ARABESQUE FINIAL BALL FINIAL HARP FINIAL FERN FINIAL 7"L, 5.5"H 4"L, 2.5"H 8"L, 5"H 6.75"L, 4.25"H 7.5"L, 7"H 6.5"L, 4.5"H All items are shown in the Earth Rust finish END CAP available for 1" and 1.5" rods Facing Page: finial: Fleur de Lys, Antique rod: 1.5" Standard Rod, Antique brackets: 1.5" standard brackets, Antique rings: 2", Antique fabric: Shadberry, Cream Provence 35 STANDARD BRACKET EXTENDED BRACKET DOUBLE BRACKET INSIDE MOUNT BRACKET CORNER ANGLE TRAVERSE BRACKET projects 4.25" (for both diameters) available for 1" and 1.5" rods projects 5.75" and 6.1" (for 1" and 1.5" rods respectively) 1" diameter (2.75"L) 1.5" diameter (4"L) projects 7.5" (for both diameters) 1" bracket projects 3.5" 1.5" bracket projects 3.75" FINISHES a. Antique b. Black Iron c. Earth Rust Golden Brass a. standard rodS: 1" and 1.5" available in 4' and 8" lengths 12"L rod connectors are available for 1" and 1.5" diameter rods hand-draw traverse rods: 1" and 1.5" Sold as kits in 4' and 8' lengths Available in one-way draw and center draw traverse options b. ONE WAY DRAW c. CENTER DRAW 36 www.robertallendesign.com To adjust rod length, please follow general installation instructions for shortening metal rods CURL TIEBACK 5.5"L, 4.5" extension BALL TIEBACK 3.75"L, 4.5" extension Photo Above: RINGS 2" diameter for both 1" and 1.5" rods finial: Fleur de Lys, Antique rod: 1.5" Traverse One-Way Draw, Antique brackets: 1.5" Top-Mount Brackets, Antique wand: Antique fabric: Shadberry, Cream Hand-draw Traverse System Features • Hand-draw traverse kits available in 4' and 8' lengths. • One-way draw and center draw traverse options available. • Hand-draw traverse adds the utility of full drapery movement across the entire rod due to specially-designed top-mount brackets. • 1" rod includes nylon glides, 1.5" rod includes roller glides with ball bearings. • 1" traverse rod cannot be used with finials. They can only be utilized with end caps or with inside mounts. One-way draw traverse kits include • Aluminum traverse rod, 16 glides for 4' and 32 for 8', 1 master carrier with overlap arm, aluminum, top-mount brackets (2 for 4', 3 for 8'), and 2 end stops. • One-way draw features reversible master carrier arm so that draw can either be from the left side or the right side. Center draw traverse kits include WAND 40"L • Aluminum traverse rod, 16 glides for 4' and 32 for 8', pair of master carriers with overlap arm and standard arm, aluminum, top-mount brackets (2 for 4', 3 for 8'), and 2 end stops. • Center draw features reversible master carrier arms (standard and overlap) so that overlap can be left over right or right over left. HARDWARE FEATURES • All hardware is available in 4 finishes: Antique, Black Iron, Earth Rust and Golden Brass • Color variation in the finishes may vary from piece to piece; it is to be expected and appreciated • 2 Rod widths: 1" and 1.5"; available in 4' and 8' lengths • A center support is recommended on any rod lengths 8' or greater Provence 37 Country Iron The Country Iron collection demonstrates the strength and integrity of traditional handforged iron in simple shapes. The spiral, loop, knot and scroll designs portray the authenticity of rustic forging. KNOT FINIAL TWIST FINIAL SPHERE FINIAL SPIRAL FINIAL LOOP FINIAL SCROLL FINIAL 6"L, 2.5"H 7"L, 2.5"H 7"L, 2.5"H 6"L, 2.5"H 3"L, 2"H 7"L, 3.25"H All items are shown in the Desert finish. END CAP .75" Diameter Facing Page: finial: Loop, Antique rod: .75" Standard Rod, Antique brackets: Decorative Bracket, Antique rings: Ring Clip, Antique fabric: Vokey, Natural fabric edging: Senna, Natural Country Iron 39 DECORATIVE BRACKET 3.5" projection DOUBLE BRACKET INSIDE MOUNT BRACKET .75" Diameter Attach Hanger Bracket to Standard Bracket for Double Bracket system STANDARD BRACKET 4.5" projection and extends to 6.5" HANGER BRACKET For double rod installations FINISHES Antique Standard and Secondary Rods .75" available in 4' and 8' lengths Black Desert 40 www.robertallendesign.com To adjust rod length, please follow general installation instructions for shortening metal rods. SPHERE TIEBACK 4.5"L, 3.5" extension TWIST TIEBACK 8"L, 5.5" extension HARDWARE FEATURES • All hardware is available in all finishes: Desert, Black, and Antique • Color variation in the finishes may vary from piece to piece; it is to be expected and appreciated • The collection is made of metal • .75" Diameter for Standard and Secondary Rods; available in 4' and 8' lengths • The standard bracket is extendable, projecting from 4.5" to 6.5" • A hanger bracket is available for double rod installation; this bracket attaches to the standard bracket to hold a secondary rod • A center support is recommended on any rod lengths 8' or greater RING for .75" rods RING W/ CLIP for .75" rods Country Iron 41 Forged Iron 00 www.robertallendesign.com Antique ironwork and weathered patinas show off beautifully on simplified metal constructions. Functional pieces and compact end caps work in any lifestyle. BUTTON END CAP FLORAL END CAP 1.5"L, 1.75"H 1.5"L, 1.75"H DART FINIAL SPEAR FINIAL 3.25"L, 2"H Facing Page: finial: Dart, Black rod: Standard 1" Black brackets: Standard Bracket, Black rings: Standard Ring, Black fabric panel: Scenic Flora, Golden 4"L, 1.375"H BALL FINIAL 2.5"L, 2.125"H LEAF FINIAL 4.25"L, 1.75"H All items are shown in the Black finish. Forged Iron 43 STANDARD BRACKET Adjustable projection from 4" to 5.25" PASS THROUGH BRACKET Adjustable projection from 3.5" to 5.5". Can be used for ceiling mount installations. EXTENDED BRACKET ARM Use with the Standard Bracket base to extend bracket projection from 6.5" to 8" ASSEMBLED EXTENDED BRACKET Extended Bracket Arm attached to Standard Bracket base. For double rod construction, attach Extended Arm to the top of the Standard Bracket. INSIDE MOUNT BRACKET for 1" rods ELBOW CONNECTOR 2.75" L FINISHES STANDARD RODS Black Gunmetal Patina Rust 44 www.robertallendesign.com available in 1" width; 4', 6', and 8' lengths To adjust rod length, please follow general installation instructions for shortening metal rods. CORNER BRACKET Adjustable projection from 7" to 9" from wall; corner projection wraps 6.5" towards rod Photo Above: RINGS for 1" rods bracket: Corner Bracket, Black rod: 1" Standard Rod, Black drapery: Crinkle Cut, Silver HARDWARE FEATURES • All hardware is available in all finishes • Color variation in the finishes may vary from piece to piece; it is to be expected and appreciated • Finials and end caps are top-mounted over the rod and secured in place with an inset screw • A variety of brackets are avaialble for multiple installation applications • A center support is recommended on any rod lengths 8’ or greater WAND 40"L Forged Iron 45 Ferraforte 00 www.robertallendesign.com Inspired by historical iron castings, the styles in Ferraforte range from classic to contemporary. Design is influenced by traditional ironwork from around the world. ACADEMY FINIAL KEY FINIAL PINECONE FINIAL GLOBE FINIAL HELIXA FINIAL SPIN FINIAL SCEPTER FINIAL JESTER FINIAL CENTURY FINIAL 3"L, 2.25"H 3.25"L, 3.25"H 7"L, 4.25"H 6.25"L, 4.5"H 6.75"L, 2.5"H 8.75"L, 5"H 3.5"L, 2"H 7.5"L, 5"H 3"L, 2"H Facing Page: finial: Key, Earth Rust rod: 1" Traverse Center Draw Kit, Earth Rust brackets: 1" traverse, Earth Rust fabric: Kluane, Terracotta All items are shown in the Black finish. END CAP 1" Diameter Ferraforte 47 STANDARD BRACKET projects 3.5" TRAVERSE BRACKET 1" bracket projects 3.5" EXTENDED BRACKET 5.5" projects 5.5" ROSETTES (shown attached to brackets) large 2.5" diameter small 2" diameter hammered 1" diameter projects 8" INSIDE MOUNT BRACKET CORNER ANGLE 2.75" L for 1" rods FINISHES Antique Brass EXTENDED BRACKET 8" 1 a. Black b. Earth Rust c. Georgian Copper a. STANDARD RODS available in 1" width; 4' and 8' lengths TRAVERSE ROD KITS Georgian Gold available in 1" width; 4' and 8' lengths Available in one-way draw and center draw traverse options b. ONE WAY DRAW Pewter 1. 2. 48 1, 2 1" traverse rod kits are not available in Antique Brass or Pewter finishes Pinecone tiebacks are not available in Pewter finish www.robertallendesign.com c. CENTER DRAW To adjust rod length, please follow general installation instructions for shortening metal rods RADIUS TIEBACK PINECONE TIEBACK 4.5" extension 4.5" extension Not available in Pewter finish Photo Above: finial: Key, Earth Rust rod: 1" Traverse Center Draw Kit, Earth Rust brackets: 1" top-mount brackets, Earth Rust fabric: Kluane, Terracotta SHORT POST FEMALE TIEBACK Shown with Large Rosette Hand-draw Traverse System Features • Hand-draw traverse kits available in 4' and 8' lengths. • One-way draw and center draw traverse options available. • Hand-draw traverse adds the utility of full drapery movement across the entire rod due to specially-designed top-mount brackets. • 1" rod includes nylon glides which provide for smooth and easy movement of draperies. One-way draw traverse kits include • Aluminum traverse rod, 16 glides for 4' and 32 for 8', 1 master carrier with overlap arm, aluminum, top-mount brackets (2 for 4', 3 for 8'), and 2 end stops. • One-way draw features reversible master carrier arm so that draw can either be from the left side or the right side. Center draw traverse kits include RINGS for 1" rods WAND 40"L • Aluminum traverse rod, 16 glides for 4' and 32 for 8', pair of master carriers with overlap arm and standard arm, aluminum, top-mount brackets (2 for 4', 3 for 8'), and 2 end stops. • Center draw features reversible master carrier arms (standard and overlap) so that overlap can be left over right or right over left. HARDWARE FEATURES • Hardware is available in 6 finishes: Black, Earth Rust, Georgian Gold, Georgian Copper, Antique Brass, and Pewter • Color variation in the finishes may vary from piece to piece; it is to be expected and appreciated • 1" Rod diameter is available in 4' and 8' lengths • A center support is recommended on any rod lengths 8' or greater Ferraforte 49 Metropolitan 00 www.robertallendesign.com Sleek lines, geometric designs, and refined finishes adapt to trendy urban lofts or refined penthouse installations. LUCENT FINIAL BALL FINIAL 3.5"L, 2.25"H 3"L, 2"H METRO FINIAL END CAP 2.25"L, 1.75"H Facing Page: .75"L, 1"H All items are shown in the Stainless Steel finish. finial: Ball, Bronze rod: Traverse 1 1/8", Bronze fabric panel: Encino Stripe, Café Metropolitan 51 STANDARD BRACKET EXTENDED BRACKET INSIDE MOUNT BRACKET TRAVERSE STANDARD BRACKET TRAVERSE EXTENDED BRACKET 2" EXTENSION ROD 2.125" projection, 2" base diameter 2.125" projection, 2" base diameter 4.125" projection, 2" base diameter 4.125" projection, 2" base diameter FINISHES for Standard Rods FINISHES for Traverse Rods Black Antique Silver Bronze Black Chrome Bronze can be used with standard or traverse rods To be used in conjunction with standard or traverse brackets for extended projections Stainless Steel a. STANDARD RODS: 1.125" available in 4', 6', and a. 8' lengths b. TRAVERSE RODS: 1.125" sold as kits in 4', 6', b. 52 www.robertallendesign.com and 8' lengths Available in one way draw RINGS for 1.125" rods GLIDES Use in place of standard tab glides for heavier drapery treatments HAND-DRAW TRAVERSE SYSTEM FEATURES • One way hand-draw traverse kits are available in 4', 6' and 8' lengths. • Hand-draw traverse adds the utility of full drapery movement across the entire rod due to specially-designed rear-mount brackets. • 1.125" rod includes nylon glides. Roller glides are available for heavier treatments. ONE-WAY DRAW TRAVERSE KIT includes • Aluminum traverse rod, 16 glides for 4', 24 for 6', and 32 for 8', 1 master carrier with overlap arm, aluminum, rear-mounting brackets (2 for 4' & 6', 3 for 8'), and 2 end stops. • One-way draw features reversible master carrier arm so that the draw can either be from the left side or the right side. • Choose either a 2" bracket projection or a 4" bracket projection for the traverse kits. • The use of a wand is strongly recommended for traverse rods. • Use a splice to connect two traverse rods together. WAND 36"L, (left) Silver (right) Bronze HARDWARE FEATURES • All finials are available in all finishes and can be used on standard and traverse rods • Standard Rods and components are available in 4 finishes: Black, Chrome, Stainless Steel, and Bronze • Traverse Rods and components are available in 3 finishes: Black, Antique Silver, and Bronze • 1.125" rod diameter is available in 4', 6', and 8' lengths • A center support is recommended on any rod lengths 8' or greater Metropolitan 53 Casual Elegance 00 www.robertallendesign.com Heirloom treasures and flea market finds, country store curiosities and antique fixtures… a mix of the unexpected. Assorted materials and finishes for sophisticated novelty. MEDALLION KNOB FINIAL ARTICHOKE FINIAL BALL FINIAL CRYSTAL KNOB FINIAL MIRRORED GLASS FINIAL CRYSTAL BALL FINIAL RING FINIAL ENDCAP SECONDARY ROD END CAP 1.5" and 2.25" small 3.75"L, 2.5"H large 5.75"L, 3.75"H 1.5" and 2.25" small 3"L, 2.5"H large 4.25"L, 3.5"H 1.5" and 2.25" small 4.25"L, 5"H large 6"L, 6.25"H 1.5" and 2.25" small 4.5"L, 3.25"H large 6.25"L, 4.5"H 1.5" and 2.25" small 5.5"L, 3.5"H large 7.75"L, 5.5"H 1.5" and 2.25" small 1.25"L, 2.5"H large 1.5"L, 3.125"H 1.5" and 2.25" small 3.5"L, 2.75"H large 5.5"L 4"H 1.5" and 2.25" small 4.5"L, 3"H large 6"L, 4.25"H For .75" Secondary Rod Facing Page: finial: Mirrored Glass, Golden Patina rod: 1.5" Standard Rod, Golden Patina fabric: Aussie, Silver trim: Ricrac Pleat, Lagoon All items are shown in the Golden Patina finish. Casual Elegance 55 STANDARD BRACKET 1.5" bracket projects 4" 2.25" bracket projects 4.25" INSIDE MOUNT BRACKET available for .75", 1.5" and 2.25" rods STANDARD DOUBLE BRACKET 1.5" double bracket projects 5" for the front rod and 2.5" for the back rod; 2.25" double bracket projects 5.5" for the front rod and 2.5" for the back rod ELBOW CONNECTOR available for .75", 1.5" and 2.25" rods FINISHES a. Antique Iron b. c. Golden Patina a. STANDARD RODS 1.5" and 2.25" available in 4', 6' and 8' lengths Silver Patina b. SECONDARY RODS .75" available in 4', 6' and 8' lengths c. TRAVERSE RODS 2.25" available as single or double track system in 4', 6' and 8' lengths Walnut Crystal Knob, Mirrored Glass, and Crystal Ball finials are only available in Golden Patina and Silver Patina finishes; all other finials and components are available in all four finishes: Walnut, Antique Iron, Golden Patina, and Silver Patina 56 www.robertallendesign.com To adjust rod length, please follow general installation instructions for shortening wood rods. RINGS C-RINGS for 1.5" and 2.25" rods for use with 2.25" Traversing rod Above Photo: finial: Ring, Antique Iron rod: 2.25" C-ring Double Traverse Rod, Antique Iron sheer: Spring Promise, Chai sheer trim: Loop Braid, Linen panel fabric: Hand Knotted, Toffee PREMIUM TRAVERSE SYSTEM FEATURES SECONDARY ROD RINGS for use with .75" Secondary rod Premium, single and double track, center-draw traverse rod systems are available in 4', 6' and 8' lengths. • Heavy-duty aluminum tracks are of the highest quality. • Superior strength performance. Maximum fabric weight: 6 pounds per foot. • Tracks are powder-coated inside and out in a brown finish, and sealed with a factory-applied dry-lubricant. This patented finishing technique allows for smooth operation and effortless glide of drapery across the rod. Premium hand-draw system includes 2.25" wood rod, aluminum track and clear acrylic wand. Track is fitted with Klick glides (14 with 4', 22 with 6' and 28 with 8'), left and right master carriers, end caps, and 3" aluminum wall brackets with 2.5" projection (3 for 4' and 6', 4 for 8'). The double tracks have 6" brackets. Traverse double bracket projects 5.5" for the front track and 1.75" for the back track. Premium C-RING hand-draw system includes same as above, but track is instead fitted with c-ring glides and master carriers and includes decorative resin c-rings (16 with 4', 24 for 6' and 32 with 8'). PREMIUM CORDED TRAVERSE SYSTEM includes 2.25" wood rod and aluminum track. Track is fitted with Klick glides (14 with 4', 22 with 6' and 28 with 8'), left and right master carriers, right-side cord control with 6' cord drop, mounted cord pulley, and 3" aluminum wall brackets with 2.5" projection (3 for 4' and 6', 4 for 8'). The double tracks have 6" brackets. Traverse double bracket projects 5.5" for the front track and 1.75" for the back track. Premium C-RING CORDED TRAVERSE SYSTEM corded traverse HOLDBACK 4.5" projection, 4.625" width, 1.75" base width WAND 40"L system includes same as above, but track is instead threaded with c-ring glides and master carriers and includes decorative resin c-rings (16 with 4', 24 with 6' and 32 with 8'). Hardware Features • 2 Rod widths: 1.5" and 2.25"; available in 4', 6' and 8' lengths • Secondary rod width .75" • Hand-draw and corded traversing rods available in 2.25" with the choice of a single or double track system • Crystal, glass, and resin finial styles • A center support is recommended on any rod lengths 8' or greater Casual Elegance 57 Costume Antique hatpins discovered in a Paris antique market provided the design inspiration for this collection. The unique use of opaque and translucent materials in classic forms is then decorated like antique jewelry. Photo Above: 00 www.robertallendesign.com finial: Hatpin, Boudior rod: 1.75" rod, Burnished Silver drapery: Matara, Lilac BASKETWEAVE FINIAL 7.5"L, 3.25" SPIRE FINIAL 7"L, 2.75"H HATPIN FINIAL 8"L, 2.75"H 7.5"L, 3.25" 8"L, 2.75"H Also available in Clear (not shown) OVAL FINIAL OVAL FINIAL CRYSTAL FINIAL CRYSTAL FINIAL BASKETWEAVE FINIAL 7"L, 2.75"H 4.75"L, 3.25"H BALL FINIAL BALL FINIAL SPIRE FINIAL 7"L, 3"H 4.75"L, 3.25"H (Boudior) 6"L, 3.75"H 7"L, 3"H HATPIN FINIAL 6"L, 3.75"H Costume 59 MARBLE EGG FINIAL END CAPS INSIDE MOUNT BRACKET STANDARD BRACKET 5.75"L, 3.25"H Available in Burnished Gold only available for 1.75" and 2.5" rod available for 1.75" and 2.5" rods 3.5" to 5.5" projection (includes rosette and hang bracket) FINISHES a. Burnished Gold b. Burnished Silver c. d. a. REEDED ROD available in 1.75" and 2.5" widths; 4' and 8' lengths b. SECONDARY ROD 1" width; 4' and 8' lengths All tiebacks, rods, rings, brackets and endcaps are available in both finishes: burnished gold and burnished silver. c. CONNECTOR For 1' rod d. ADAPTER For aesthetic reasons only and are not required for attachment. They may be preferred with some finials on the 1.75" rod. 60 www.robertallendesign.com ORMOLU TIEBACK (top) 4.25" diameter, 5" extension ROPE TIEBACK (bottom) 5"diameter, 5" extension Tiebacks are available in both finishes HaRDWARE Features RINGS 2.25" diameter for 1.75" rods 2.75" diameter for 2.5" rods • 2 Rod widths: 1.75" and 2.5" are available in 4' and 8' lengths • A 1" secondary rod is available for a double rod installation; please order a connector when combining lengths • 6 finial choices in two color options: Burnished Gold and Burnished Silver (Marble Egg finial is only available in Burnished Gold) • All hardware is available in both finishes • A center support is recommended on any rod lengths of 8' or greater • Those finials made of translucent materials may appear slightly different in color based on the light source • The finials are composed of materials of a very decorative and delicate nature. • To avoid breakage, all finials should be held by their base during the installation process, especially when attaching to rods; please use a protective covering with the trim wrapped finials to avoid soiling Costume 61 Al Fresco 00 www.robertallendesign.com Natural forms and architectural elements are imbued in the al fresco collection. This functional and decorative collection is for outdoor and indoor use. HAMMERED BALL FINIAL PINECONE FINIAL LANTERN FINIAL PALM LEAF FINIAL CORAL FINIAL END CAP 1" and 1.5" diameter small 3"L, 2.25"H large 4"L, 3.25"H 1" and 1.5" diameter 5.25"L, 4"H 1" and 1.5" diameter small 3.75"L, 2"H large 4.75"L, 2.25"H 1" and 1.5" diameter 4"L, 4"H 1.5" diameter 4.5"L, 3.25"H available for 1" and 1.5" rods Facing Page: finial: Lantern, Pewter rod: 1.5" Standard Rod, Pewter sheer: Idoia, Graphite Al Fresco 63 STANDARD BRACKET TRAVERSE BRACKET 1" projects 3.5" 1.5" projects 3.75" 1" bracket projects 3.5" 1.5" bracket projects 3.75" TRAVERSE ROD FINISHES a. Black b. Bronze a. STANDARD RODS 1" and 1.5" available in 4' and 8' lengths b. HAND-DRAW TRAVERSE RODS 1" and 1.5" Coral Sold as kits in 4' and 8' lengths Available in one-way draw To adjust rod length, please follow general installation instructions for shortening metal rods. Pewter Silver Pinecone, Hammered Ball, Palm Leaf and Lantern finials are available in the following finishes: Black, Bronze, Silver, and Pewter Only Coral finial is available for Coral finish 64 www.robertallendesign.com BALL TIEBACK 4.5" projection Photo Above: finial: Hammered Ball, Bronze rod: 1.5” Traverse Rod, Bronze fabric: Plains Apache, Chai Hand-draw Traverse System Features RINGS for 1" and 1.5" rods • Hand-draw traverse kits available in 4' and 8' lengths. • Reversible one-way draw traverse options available. • Hand-draw traverse adds the utility of full drapery movement across the entire rod due to specially-designed top-mount brackets. • 1" and 1.5" rods include rust-proof roller glides for smooth and easy movement of draperies. One-way draw traverse kits include • Aluminum traverse rod, 16 glides for 4' and 32 for 8', 1 master carrier with overlap arm, aluminum, top-mount brackets (2 for 4', 3 for 8"), and 2 end stops. • One-way draw features reversible master carrier arm so that draw can either be from the left side or the right side. HARDWARE FEATURES • All finishes are powder-coated for outdoor performance • Aluminum hardware is rust resistant • 2 Rod widths: 1” and 1.5” are available in standard and traverse styles • All styles are available in 4’ and 8’ lengths • A center support is recommended on any rod lengths 8’ or greater WAND 40"L Al Fresco 65 Polynesian 00 www.robertallendesign.com Images of shell covered beaches and bamboo huts. Exotic, natural materials mix together for tropically inspired designs. ABALONE FINIAL CAPIZ SHELL FINIAL PENSHELL FINIAL KAPOK FINIAL BANANA LEAF FINIAL TIKI FINIAL REEDED FINIAL ABACA ROPE FINIAL TROPICAL FINIAL 4"L, 3"H 4"L, 3"H 3.75"L, 3.5"H Facing Page: finial: Abaca Rope, Rattan rod: Standard, Rattan fabric panel: Rolling Stripe, Rustic 4"L, 3"H 4"L, 3"H left, Walnut; right, Rattan 4"L, 4"H left, Walnut; right, Rattan 4"L, 3"H 4"L, 4"H 5.25"L, 4"H All finials are available in both Walnut and Rattan finishes. Variations are shown in the above images when finials differ per finish. Polynesian 67 STANDARD BRACKET ABACA ROPE BRACKET projects 3.75" base height 4.25" bottom, Walnut; top, Rattan projects 3.75" base height 4.25" bottom, Walnut; top, Rattan EXTENDED BRACKET (not shown) projects 6" base height 4.25" TIKI BRACKET projects 3.75" base height 4.25" TROPICAL BRACKET projects 3.75" base height 4.25" REEDED BRACKET projects 3.75" base height 4.25" FINISHES Standard Walnut Fluted Walnut Reeded Walnut Standard Rattan Fluted Rattan Reeded Rattan a. a. STANDARD ROD 1.75" width available in 4', 6' and 8' lengths b. FLUTED ROD 1.75" width available in 4', 6' and 8' lengths b. c. REEDED ROD 1.75" width available in 4', 6' and 8' lengths c. 68 www.robertallendesign.com To adjust rod length, please follow general installation instructions for shortening wood rods. STANDARD RINGS for 1.75" rods Hardware Features • Natural materials are used in the finials and on the brackets. These may vary slightly from piece to piece • Mix and match finials with rods and components for a variety of looks • The Banana Leaf finials, Abaca Rope finials, and Abaca Rope brackets have different colored materials for the Rattan and Walnut finishes; see images for color references • 1.75" standard, fluted, and reeded rods are available in 4', 6' and 8' lengths • A center support is recommended on any rod lengths 8' or greater FLUTED RINGS for 1.75" rods Polynesian 69 shop by COLLECTION page rod diameters features Al Fresco 62 1", 1.5" Outdoor properties, 5 Finials, 5 Finishes, Standard/Traverse Rod Architrave 26 1", 1.5" 7 Finials, 4 Finishes, Standard/Traverse Rod, Elbow, Inside Mount Bedpost 10 1.25", 1.75" 6 Finials, 5 Finishes, Standard/Twisted Rod, Inside Mount Casual Elegance 54 1.5", 2.25" 7 Finials, 4 Finishes, Standard/Traverse Rod, Elbow, Inside Mount Chess 14 2.25" 5 Finials, 4 Finishes, Standard/Traverse Rod, Elbow, Dbl. Rod option Classic 6 1.75" 5 Finials, 4 Finishes, Standard Rod Costume 58 1.75", 2.5" 7 Finials, 2 Finishes, Reeded Rod, Dbl. Rod option, Inside Mount Country Iron 38 0.75" 6 Finials, 3 Finishes, Standard w/ Dbl. Rod option, Inside Mount Ferraforte 46 1" 10 Finials, 6 Finishes, Standard Rod w/ Traverse for 4 finishes, Elbow, Inside Mount Forged Iron 42 1" 6 Finials, 4 Finishes, Standard Rod, Corner Bracket, Inside Mount, Dbl. Rod Metropolitan 50 1.125" 3 Finials, 5 Finishes, Standard/Traverse Rod, Inside Mount Parisian 22 1.5", 2.25" 7 Finials, 4 Finishes, Standard/Fluted/Traverse w/ Dbl. Rod option, Elbow, Inside Mount Polynesian 66 1.75" 9 Finials, 2 Finishes, 5 Decorative Brackets, Standard/Fluted/Reeded Rod Provence 34 1", 1.5" 6 Finials, 4 Finishes, Standard/Traverse Rod, Dbl. Rod option, Inside Mount Toscana 30 1.5", 2" 7 Finials, 5 Finishes, Standard/Twisted Rod, Elbow, Inside Mount Traditions 18 2.25" 6 Finials, 5 In-stock Finishes, Custom Finishing options, Fluted Rod index 00 www.robertallendesign.com shop by LIFESTYLE Modern Forged Iron 42 Metropolitan 50 Polynesian 66 Rustic Toscana 30 Provence 34 Country Iron 38 Traditional Classic 6 Bedpost 10 Chess 14 Traditions 18 Parisian 22 Architrave 26 Forged Iron 42 Ferraforte 46 Embellished Casual Elegance 54 Costume 58 Tropical Al Fresco 62 Polynesian 66 index 71 shop by FINISH Wood Tones Bedpost, pg 12 Classic, pg 8 Mahogany Mahogany Chess, pg 16 Mahogany Polynesian, pg 68 Walnut Traditions, pg 20 Bedpost, pg 12 Casual Elegance, pg 56 Parisian, pg 24 Walnut w/GoldWalnutWalnutWalnut Classic, pg 8 Bedpost, pg 12 Antique Walnut Cherry Classic, pg 8 Distressed Oak Polynesian, pg 68 Rattan Parisian, pg 24 Bedpost, pg 12 OakPine Classic, pg 8 Maple Chess, pg 16 Driftwood Golds Ferraforte, pg 48 Country Iron, pg 40 Provence, pg 36 Traditions, pg 20 Antique BrassAntiqueGolden BrassGilded Casual Elegance, pg 56 Golden Patina Costume, pg 60 Burnished Gold Parisian, pg 24 Vintage Gold Chess, pg 16 Old World Gold Silvers Ferraforte, pg 48 Metropolitan, pg 52 Metropolitan, pg 52 Al Fresco, pg 64 PewterAntique SilverStainless SteelSilver Metropolitan, pg 52 Casual Elegance, pg 56 Traditions, pg 20 Costume, pg 60 ChromeSilver PatinaPlatinumBurnished Silver Al Fresco, pg 64 Forged Iron, pg 44 Chess, pg 16 Architrave, pg 28 PewterGunmetalWatermark SilverWatermark Silver 72 www.robertallendesign.com black Al Fresco, pg 64 Ferraforte, pg 48 Forged Iron, pg 44 Metropolitan, pg 52 BlackBlackBlackBlack Country Iron, pg 40 Black Provence, pg 36 Black Iron Parisian, pg 24 Mahogany Traditions, pg 20 Ebony Toscana, pg 32 Architrave, pg 28 Earth Rust Earth Rust Provence, pg 36 Earth Rust Ferraforte, pg 48 Earth Rust DARK RUSTS Casual Elegance, pg 56 Antique Iron DARK METALS Architrave, pg 28 Ferraforte, pg 48 Traditions, pg 20 Forged Iron, pg 44 Antique GoldGeorgian GoldBronzePatina Al Fresco, pg 64 Metropolitan, pg 52 Ferraforte, pg 48 BronzeBronzeGeorgian Copper LIGHT RUSTS Architrave, pg 28 Toscana, pg 32 Provence, pg 36 Toscana, pg 32 AntiqueAntiqueAntiqueItalian Gold Forged Iron, pg 44 Rust Painted COLORS Toscana, pg 32 Sienna Country Iron, pg 40 Desert Al Fresco, pg 64 Toscana, pg 32 Bedpost, pg 12 CoralLimestoneCountry White index 73 shop by material FINIALS Wood & Natural Materials Classic page 7 Glass, Crystal & Clear Resin Metropolitan page 51 all styles Lucent Finial Bedpost page 11 Casual Elegance page 55 Chess all styles page 15 all styles Polynesian page 67 Crystal Knob, Crystal Ball, & Glass Urn Finials Costume page 59 Abalone Shell, Capiz Shell, Penshell, Banana Leaf, Abaca Rope, Kapok & Reeded Finials Spire, Hatpin & Crystal Finials Metal Architrave page 27 Vase Finial Solid Resin Traditions page 19 Toscana page 31 Provence page 35 all styles Parisian page 23 Turban, Caliz, Quatrefoil, Pomegranate, Pino & Axis Finials Toscana page 31 Firenze & Piazza Finials Artichoke, Ball, Medallion Knob, & Ring Finials all styles Metropolitan page 51 Basketweave & Marble Egg Finials all styles Ferraforte page 47 Costume page 59 all styles Forged Iron page 43 Casual Elegance page 55 all styles Country Iron page 39 all styles Architrave page 27 Bella, Loggia, Campagna & Saxon Finials Ball & Metro Finials Al Fresco page 63 Polynesian page 67 Textile Costume page 59 Tiki & Tropical Finials all styles Ball & Oval Finials shop by material RODS Metal Architrave page 28 Toscana page 32 Provence page 36 Country Iron page 40 74 www.robertallendesign.com 74 www.robertallendesign.com Forged Iron page 44 Ferraforte page 48 Metropolitan page 52 Al Fresco page 64 Wood Classic page 8 Bedpost page 12 Chess page 16 Traditions page 20 Parisian page 24 Casual Elegance page 56 Costume page 60 Polynesian page 68 glossary Adapter Master Carrier A small part which allows a finial to fit rods of different diameters. The arm of the traverse track that holds the edge of the drapery. They are available in one-way draw (one master carrier) or center draw (one master carrier and one overlap arm to hide the drapery closure). Apron Horizontal decorative wood trim below the windowsill. One-way Draw Bracket (Standard, Extended, Double, Adjustable, Ceiling) The main support for the rod, which extends from the wall. Brackets are available in standard, extended, double or a hang bracket style. Double brackets, or the attachment of a hang bracket, allows for two rods. Extended brackets provide more clearance space from the wall. Adjustable brackets can either be cut down to a certain size or have an adjustable arm that tightens to a certain length. Closed brackets can be used in ceiling-mounted installations. A term used with traversing rods to note that the drapery panel is designed to open in one direction. Pin on Hook A metal pin, which slides into pleated draperies, to attach them to the rings. Projection Center Draw The measurement of an item’s extension from the wall. Bracket projection is measured from the wall surface to the center of the bracket cradle (rod center point). A term used with traversing rods to note that the drapery panels will close at the window’s center point. Return Center Support The flat portion of a drapery heading that wraps around the corner of the rod to cover the end of the rod and the bracket A bracket used to support longer rods from sagging in the middle. Center supports can also hide rod connection points when splicing rods together. Ring Clearance A ring is used to attach the drapery treatment to the rod. They are sized larger than the rod’s diameter for ease of movement. The distance from the mounting surface to the rod. Rod Connector & Connector Screw A light weight tube used to connect two metal rods. It also provides strength at the point of connection. A connector screw is a double ended screw that is used to attach the ends of two wood rods together. The core element from which the drapery treatment is hung. Rods are made of either metal or wood and can be cut shorter or combined for custom sizing. A secondary rod may also be offered for double rod installations. Rosette Elbow Connector (Corner Angle) An adjustable corner angle that attaches two rods together. This item can be used in bay windows or around corners to keep a seamless rod flow. A decorative detail designed for additional accent. It is mounted on a screw and can be attached to a bracket or a tieback post. Secondary Rod End Cap A short, narrow finial option for the end of a rod. It is offered as an alternative to a finial for situations in which an obstacle does not allow room for a finial. The rod that sits behind the main, decorative rod for double drapery panel treatments. This rod requires special double rod brackets or bracket attachments for installation. Finial Sill Decorative end pieces designed to attach to the end of rods, originally used to stop the rings from falling off. The lower horizontal part of the window frame; a shelf-like projection. Tieback (Holdback) Frame The trim surrounding the window. Decorative accents mounted to the wall which are designed to hold a drapery treatment to each side of the window. Straight-posted tiebacks can also be used to hold scarves, create swag treatments, or hang curtain panels. Glide A plastic tab that is inserted into a traverse track and used to attach the drapery panel to the traverse rod. Roller glides have ball bearings or small wheels and should be used for heavier treatments. Traverse Rod Inside Mount Bracket A rod that features a metal track with glides to attach draperies to. This can be operated by cord or by hand draw systems. Metal traverse rods have the track constructed inside of the rod structure, while wooden rods contain a cut out section allowing for a metal track to be inserted separately. A support for the rod within the jamb of the window or wall corner. Inside mounts do not allow for finials. Wand Jamb A baton attached to a ring or a master carrier used to assist in adjusting the curtain movement. The inner side and top sections of a window frame. Index index 75 75 traversing in METAL ROD collections Q: How many metal rod collections offer traversing options? Q: What is included in a traverse rod kit? A: Traversing rods are available in five metal collections: Al Fresco (pg 63), A: Each kit contains a rod, glides, end stops, master carrier(s), and brackets. Finials, Architrave (pg 29), Ferraforte (pg 49), Metropolitan (pg 53), and Provence (pg 37). Reference each collection within the catalog for further details regarding finishes, rod diameters, and functional qualities. Q: How does a metal traverse rod work? A: The traverse rod is an extruded aluminum pole constructed with internal hollow channels that allow for glides and brackets to be inserted. The brackets are either mounted from the top or the back of the rod and the glides sit inside the bottom channel of the rod. Each track is lubricated with a silicone spray in order to assist in the ease of glide movement. Drapery panels are hung from the glides either by stitching or by the use of a curtain pin attachment. The master carriers offer additional support for the starting edge of the drapery panel and provide an overlap arm for center draw applications. End stops offer a permanent placement for the draperies to stay fixed in place and prevent glides from getting stuck at the end of the rod where the finials or end caps are mounted. wands, and other components must be ordered separately. Q: How much weight does a traverse rod hold? A: Traverse rods function smoothly between 2-3 lbs per foot of drapery panel weight. This means that lighter draperies are preferred for this rod construction over heavier treatments. Roller glides can be used in place of tab glides in order to help distribute the weight of heavier drapery panels. Q: How do you connect two traverse rods together? A: When connecting two traverse rods a traverse rod splice must be ordered. The splice is a metal bar that is inserted into the top track area that holds the two rods together. Insert the splice into the two tracks and tighten with an Allen key to set the screws. Attach a bracket on both sides of the splice to ensure strength and stability. Glides and master carriers can be inserted on the extended track as desired. For best results, be sure to splice the rods together as tightly as possible in order to ensure a smooth transition for the glides. Q: How can I layer two traverse rods for a double rod installation? A: The Metropolitan collection offers a 2" and 4" bracket along with a 2" extender piece. A traverse rod with a 2" projection can sit inside of a rod with a 4" or 6" projection, providing you with a front and back track for your draperies. traversing faq traversing in WOOD ROD collections Q: How many wood rod collections offer traversing options? Q: How do you connect two traverse rods together? A: Traversing rods are available in three wood collections: Parisian (pg 25), Chess A: When connecting two traverse rods, there are a few options available for assembly. (pg 17), and Casual Elegance (pg 57). Reference each collection within the catalog for further details regarding finishes, rod diameters, and functional qualities. Q: How does traversing work in the wood rod collections? Connecting the wood rods: The wood rods can be connected with a double ended screw. The gap between the rods can be hidden by a Traverse Rod Connector or a decorative Traverse Bracket. A: A metal traversing track is inserted into a partially cut out wood rod. The wood rod hides the metal track and gives the appearance of a standard wood rod construction. The track is an extruded aluminum piece that is constructed with an internal chamber that allows for glides and cording to be inserted. The brackets are mounted to the top inside section of the rod and hold the track in place with a plastic fastener. Each track is lubricated with a silicone spray in order to assist in the ease of glide movement. Drapery panels are hung from the glides either by stitching or by the use of a curtain pin attachment. The master carriers offer additional support for the starting edge of the drapery panel and provide an overlap arm for center draw applications. End stops offer a permanent placement for the draperies to stay fixed in place and prevent glides from getting stuck at the end of the rod where the finials or end caps are mounted. Q: What is included in a traverse rod kit? A: Each kit contains a wood rod, a metal traverse track, glides, end stops, master carrier(s), and brackets. There is an option of hand draw or corded tracks. The corded tracks come assembled with the cording installed and a 6’ cord drop. Finials, wands, and other components must be ordered separately. Connecting the traversing tracks: The metal tracks can be combined several ways. The traverse tracks can be installed so that two one-way draws (corded or hand draw) meet in the middle. The overlap arm will hide the seam between drapery panels and tracks. Tracks can also be spliced together for a continuous one-way draw. Attach the metal splice to one track and click the other track into place to secure the two tracks together. Install brackets on both sides of the spliced track to ensure stability. For best results, splice the rods together as tightly as possible for a smooth transition for glide movement. Corded tracks will need to be spliced and restrung by a professional hardware installer. Q: Are double traversing tracks available? A: Yes. All collections are available with double track constructions. A dual track Q: How much weight does a traverse rod hold? A: Traverse rods function smoothly with up to 6 lbs per foot of drapery panel weight. This means that lighter draperies are preferred for this rod construction over heavier treatments. Corded tracks tend to work better when heavier treatments are used. bracket is provided and an additional track is supplied for the back treatment. Q: What is a C-ring? A: A C-ring is a separate item that is attached to the glide and serves as a decorative element, imitating the look of a standard rod with rings. This ‘C’ shaped ring goes ¾” of the way around the rod, attaching on one end to the top hole in the specially designed c-ring glide. Both corded and hand draw tracks are available with C-ring constructions. index 77 INSTALLATION TIPS MEASUREMENT TERMS Finial Length Attaching Finials Horizontal measurement, when installed, from bottom edge to tip. Finials and End Caps either have pre-inserted screws that twist into the rod or top-mounted set screws that overlap onto the rod. Use the tightening key or a screwdriver to secure set screws. Finial Height Vertical measurement, when installed, from top to bottom. To Shorten Rods: Tieback Diameter Horizontal measurement, when installed, across the front centerline. Tieback Projection Measurement from the wall to the front of the tieback. Tieback Length Front length measurement before it returns to the wall. Ring Diameter The horizontal measurement, from the inside left edge to the inside right edge. Wooden Rods Use a fine tooth saw and a miter box to obtain a straight cut. After cutting, drill a pilot hole in the center of the end so a finial can be easily attached. Metal Rods Use a hacksaw, steel saw or tube cutter. If the rod has an inner liner, you may wish to cut the rods separately. Please protect the rod when cutting to avoid scratching the surface and damaging the finish of the rod. To Combine Rods: Wooden Rods MEASURE & INSTALL Consider the following hints when planning to dress up your windows: • Consider both the practical and aesthetic needs of the window treatment, when deciding how it will be installed. • Be aware of anything that may interfere with the installation, i.e., corners, doors and built in furniture. • Consider the added length of the finial when determining the length of the rod. • Use a steel measuring tape or carpenter’s ruler, for accurate and consistent measurements. • Be precise, round all measurements to the nearest eighth of an inch. • Measure all windows, even if they appear to be the same size. • Use a worksheet or window diagram to help keep measurements clearly organized. • Select the hardware before final determinations are made on the amount of fabric needed. • Do not install hardware on the window frame or crown molding. All rods will be pre-drilled on both ends. A connector screw will be needed to combine rods. This double-ended screw should be inserted into one of the rods with pliers. The other Rod can then be screwed onto the first Rod. If the Rod has been shortened, a pilot hole will need to be re-drilled into the center. Metal Rods A Connector must be ordered to combine most metal rods. The Connector is a short tube that is inserted inside the rods at the point of connection. A Center Support is recommended for all Rod lengths 8’ or greater. These general instructions apply to all Robert Allen Window drapery hardware collections, unless otherwise noted in the individual collection Product Information Guide. Connecting Traverse Rods: Wood Rods Wood traversing rods can be connected with a double ended screw. The gap between the rods can be hidden by a Traverse Rod Connector or a decorative Traverse Bracket. The metal tracks used in conjunction with the wood rods can be combined several ways. The traverse tracks can be installed so that two one-way draws meet in the middle. The overlap arm will hide the seam between panels. Tracks can also be spliced together for a continuous one-way draw. Be sure to support both sides of the spliced track ends by installing brackets on either side of the joined areas. These methods can be done with hand-draw tracks. Corded tracks will need to be professionally re-strung and corded to ensure proper function. Metal Rods Metal rods can be connected with the use of a splice. Order a splice separately for this type of installation. Insert the splice into the top portion of the track (the area where brackets are inserted) to join the two rods together. Tighten the set screws to secure the joined rods. Attach brackets along either side of the sliced track to support the connection. measurements & installation 78 www.robertallendesign.com USA 225 Foxboro Boulevard Foxboro, MA 02035 T 800.333.3777 F 800.332.8256 CANADA 2880 Argentia Road Unit Eleven Mississsauga, ON L5N7X8 T 800.363.3020 F 800.463.0339 UK Chiltern House The Valley Centre Gordon Road, High Wycombe Buckhingham HP13 6EQ England T +44(0) 1494 474741 F +44(0) 1494 603400