docProduct Catalogue
download 
Report Transcription
Product Catalogue
AN ISO 9001:2000 & TS 16949 CO. Contents Particulars INTRODUCTION WRAPPED INDUSTRIAL V-BELTS CLASSICAL SECTION Z/10x6 A/13x8 B/17x11 C/22x14 D/32x19 20/20x12.5 25/25x16 E/38x23 WEDGE SECTION SPZ/10x8 SPA/13x10 SPB/17x14 SPC/22x18 HIGH CAPACITY NARROW V-BELTS 3V/9.7x8 5V/16x14 8V/25x23 CUT EDGE INDUSTRIAL V-BELTS CLASSICAL SECTION ZX/10x6 AX/13x8 BX/17x11 CX/22x14 WEDGE SECTION XPZ/10x8 XPA/13x10 XPB/17x14 XPC/22x18 HIGH CAPACITY NARROW V-BELTS 3VX/9.7x8 5VX/16x14 RIBBED/POLY INDUSTRIAL V-BELTS H/PH J/PJ K/PK L/PL M/PM VARI SPEED V-BELTS BANDED BELTS HA/13x10 HB/17x13 HC/22x16 HD/32x21.5 HSPB/17x16 HSPC/22x20 H3V/9.7x10 H5V/15.8x16 Page No. 1 2 3 4-5 6 7 8 8 9 10 11 12 12 13 13 13 14 15 16 17 18 19 20 20 21 21 22 22 23 24 24 25 26 26 27 27 28 28 29 29 Contents Particulars Page No. H8V/25.4x25 29 HEXAGONAL V-BELTS AA/13x10 30 BB/17x14 30 CC/22x17 30 LAWN MOWER BELTS 3L/10x6 31 4L/13x8 32 5L/17x10 33 PIX COMBINE HARVESTER BELTS BELTS TO FIT AS CLAAS 34-36 BELTS TO FIT AS BIZON 36 BELTS TO FIT AS DEUTZ FAHR 37-38 BELTS TO FIT AS DRONNINGBORG 39 BELTS TO FIT AS FORTSCHRITT 39 BELTS TO FIT AS JOHN DEERE 40 BELTS TO FIT AS LAVERDA 41 BELTS TO FIT AS NEW HOLLAND CLAYSON 42-44 BELTS TO FIT AS CASE/INTERNATIONAL HARVESTER 44 GRASS MACHINERY BELTS 44 BELTS TO FIT AS MASSEY FERGUSON 45 POWER DRIVE TAPER BORE “SPZ” SECTION PULLEYS 46 TAPER BORE “SPA” SECTION PULLEYS 47 TAPER BORE “SPB” SECTION PULLEYS 48 TAPER BORE “SPC” SECTION PULLEYS 49 49 TAPER BUSHES WITH SCREWS 50 POWER DRIVE COUPLINGS 51 TYRE FLEX COUPLINGS & TYRES 51 JAW COUPLINGS & INSERTS 52 BRITISH STANDARD B.S. ROLLER CHAIN 53 AMERICAN STANDARD A.S.A. ROLLER CHAIN 54 SIMPLEX TAPER BUSH SPROCKETS 54 DUPLEX TAPER BUSH SPROCKETS 55 TRIPLEX TAPER BUSH SPROCKETS 55 SIMPLEX PILOT BORE SPROCKETS 55 CAST IRON : SIMPLEX PILOT BORE SPROCKETS 55 DUPLEX PILOT BORE SPROCKETS 55 CAST IRON : DUPLEX PILOT BORE SPROCKETS 55 TRIPLEX PILOT BORE SPROCKETS 55 CAST IRON : TRIPLEX PILOT BORE SPROCKETS 56 PLATE WHEELS 57 SPECIAL APPLICATION BELTS 58 STANDARD DESIGNATION FOR POLY/RIBBED V-BELTS 58 STANDARD DESIGNATION FOR BANDED BELTS STANDARD DESIGNATION FOR CUT EDGE VARI SPEED BELTS 59 59 MINIMUM ORDER QUANTITIES 60 SERVICE EQUIPMENT 61 NOTES CONDITIONS OF SALE INTRODUCTION FRAS BELTS : Certain working environments such as coal mines & sensitive 4. Place Tension Tester at the centre of the span of the belt. Apply force with the help of Tension Tester perpendicular petrochemical installations require V-belts having Fire to the span till the lower surface of the ring touches the Resistant properties in addition to normal Anti-static string. properties. 5. Read the deflection force value (N) on the Newton Scale by taking reading at the lower side of the upper ring. FRAS (Fire Resistant Antistatic Belts) belts are suitable for 6. Compare the deflection force value (N) with the values such environments. This construction is thoroughly tested given in the table ‘A’. The deflection force value (N) should during and after manufacture to comply with all aspects of lie between the minimum and maximum values given in IS-2494 Part II and BS-3790. ‘PIX’ FRAS belts conforms to : the table ‘A’. II 2GD c IIB X (Test report no. IB-03-4-934) 7. Deflection force less than minimum recommended value in the range indicates an under-tensioned drive and HEAT RESISTANT BELTS deflection force higher than maximum recommended value Continuous contact with oil & grease have harmful effects on indicates an over-tensioned drive. the belt life. The Heat Resistant properties of regular construction belts allow drive operations in ambient POLY/RIBBED V-BELTS temperature up to 700C. Ambient temperature above 700C Installation procedure : may lead to premature ageing of belts. For both these 1. Switch off the main supply before beginning with the conditions PIX AOH belts are to be used. Its special Oil exercise of installation. Resistant cover protects the belt from contamination. 2. Bring the pulleys closer to each other so that the belt can Also these belts have been developed to work in ambient be removed easily. temperature up to 1000C. PIX AOH belts are also Anti-static. 3. Inspect the pulley grooves for any scores, sharp edges, dirt and rust. Clean them as required. FREE SET CONCEPT 4. Ensure the alignment of pulleys. Make sure that the shafts Few good reasons for using it are also properly aligned. • No length code 5. Mount the ribbed belt with no tension. Make sure that the • Low variation in length tolerance ribs have been properly seated in the grooves. • Less Centre adjustment 6. Tension the ribbed belts as per the procedure • Low stretch recommended. • Low variation in elongation within a set of belts 7. Give some running time to the drive so that the belts are • Power transmitted more evenly properly seated in the grooves. • Longer life 8. Guard the drive properly. • Longer maintenance intervals • Less inventory Tensioning procedure : 1. Fit the belt on the pulleys with no tension WRAPPED & COGGED CONSTRUCTION V-BELTS 2. Draw two perpendicular lines across the belt at about 80% Installation and maintenance of the belt span between the pulleys as shown in the • The drive should always be inspected periodically. figure. Say for example the lines are placed 1000 mm • Prior to installation, inspect sheave for dirt, rust, cracks apart. ( A ). burrs etc. • The belts should never be forced on the pulleys. • Maintain proper belt tension to avoid slippage. Always use A ‘PIX Tension Tester’ for tensioning/re-tensioning. • Change your belts - If cracks are observed at the side wall or at the bottom. - If the cord is protruding out from the belt. 3. Increase the distance between two lines by 0.5 to 0.75% i.e. by 5 mm to 7.5 mm for an initial spacing of 1000 mm, so that the (A) now becomes 1007.5 mm. A RIGHT WRONG Ensure perfect alignment of pulleys WRONG Do not pry or roll V-belts into the pulley grooves 4. Run the drive under load for about 10 minutes. Tension measurement procedure : 1. Measure the span length of the belt in mm. (Ref. Sketch) 5. Check the tension of the belt (spacing between two lines) 2. Tie a string/thread on the two pulleys and readjust, if necessary. along the length of belts and mark centre of the span on the belt. Installation and take up allowance E for take up 3. Calculate 1.5% of the span (say ‘x’) L PJ PK PL PM Calculated E for belt length less than 1000 mm (mm) M T M T M T M T E for fitting and 1% of the span for belt length <750 -10 +10 -11 +13 750-1200 -10 +15 -12 +16 -15 +20 more than 1000 mm. Adjust lower Belt deflection measurement 1200-2000 -15 +20 -16 +22 -20 +20 ring on the tension tester on 2000-3500 -20 +30 -23 +32 -30 +35 -40 +50 mm scale to coincide, ‘x’ mm with the -40 +50 -50 +70 3500-6000 M -100 +130 >6000 T lower side of the ring. Adjust lower side of the upper ring at 0.00 N. SPAN FORCE DEFLECTION 1 CLASSICAL SECTION : Z Wrapped V-Belts Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215 Belt Reference Z 14 Z 15 Z 15.5 Z 16 Z 16.5 Z 17 Z 17.5 Z 18 Z 18.5 Z 19 Z 19.5 Z 20 Z 20.5 Z 21 Z 21.5 Z 22 Z 22.5 Z 23 Z 23.5 Z 24 Z 24.5 Z 25 Z 25.5 Z 26 Z 26.5 Z 27 Z 27.5 Z 28 Z 28.5 Z 29 Z 29.5 Z 30 Z 30.5 Z 31 Z 31.5 Z 32 Z 32.5 Z 33 Z 33.5 Z 34 Z 34.5 Z 35 Z 35.5 Z 36 Z 36.5 Z 37 Z 37.5 Z 38 Z 38.5 Z 39 Z 39.5 Z 40 Z 40.5 Z 41 Z 41.5 Z 42 Z 42.5 Z 43 Z 43.5 Z 44 Z 44.5 Z 45 Z 45.5 Z 46 Z 46.5 Z 47 Z 47.5 Z 48 Inside Length (mm) 360 381 395 410 420 435 450 457 470 480 500 510 520 535 545 560 575 585 600 610 620 635 650 660 675 686 700 710 725 735 750 760 775 790 800 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 1090 1105 1120 1130 1143 1155 1168 1180 1190 1200 1220 Datum/Pitch Length (mm) 378 403 416 428 443 454 467 479 494 505 517 530 543 555 568 581 594 606 619 632 644 657 670 682 695 708 721 733 746 759 771 784 797 809 822 835 848 860 873 886 898 911 924 936 949 962 975 987 1000 1013 1025 1038 1051 1063 1076 1089 1102 1114 1127 1140 1152 1165 1178 1190 1203 1216 1229 1241 Lp to La 16 6 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec • ATEX certified FRAS belts are available Belt Length Factor (mm) 10 mm Section Z Z Section Li to Lp 22 Li to La 38 Manufacturing Range 254 - 4953 mm Weight per metre (Kgs) 0.057 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 10 6 50 dp (mm) Nominal Length (Inches) : Li ‘PIX’ FRAS belts conforms to : Minimum Order Qty. (No. of V-Belts) 50 II 2GD c IIB X (Test report no. IB-03-4-934) Z / 10x6 Belt Reference Z 48.5 Z 49 Z 49.5 Z 50 Z 50.5 Z 51 Z 51.5 Z 52 Z 52.5 Z 53 Z 53.5 Z 54 Z 55 Z 56 Z 57 Z 58 Z 59 Z 60 Z 61 Z 62 Z 63 Z 64 Z 65 Z 66 Z 67 Z 68 Z 69 Z 70 Z 71 Z 72 Z 73 Z 74 Z 75 Z 76 Z 77 Z 78 Z 79 Z 80 Z 81 Z 82 Z 82.5 Z 83 Z 83.5 Z 84 Z 84.5 Z 85 Z 86 Z 86.5 Z 87 Z 88 Z 89 Z 90 Z 91 Z 92 Z 93 Z 94 Z 95 Z 96 Z 97 Z 98 Z 99 Z 100 Z 101 Z 102 Z 103 Z 104 Z 105 Z 106 Inside Length (mm) 1230 1250 1260 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2095 2100 2120 2134 2150 2160 2184 2200 2210 2240 2260 2286 2311 2337 2360 2388 2413 2438 2464 2500 2520 2540 2565 2591 2615 2650 2667 2700 Datum/Pitch Length (mm) 1254 1267 1279 1292 1305 1317 1330 1343 1356 1368 1381 1394 1419 1444 1470 1495 1521 1546 1571 1597 1622 1648 1673 1698 1724 1749 1775 1800 1825 1851 1876 1902 1927 1952 1978 2003 2029 2054 2079 2105 2118 2130 2143 2156 2168 2181 2206 2219 2232 2257 2283 2308 2333 2359 2384 2410 2435 2460 2486 2511 2537 2562 2587 2613 2638 2664 2689 2714 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 2 Belt Reference Z 107 Z 108 Z 109 Z 110 Z 112 Z 113 Z 114 Z 115 Z 116 Z 117 Z 118 Z 119 Z 120 Z 122 Z 124 Z 126 Z 128 Z 130 Z 132 Z 134 Z 136 Z 138 Z 140 Z 142 Z 143 Z 144 Z 146 Z 148 Z 150 Z 152 Z 154 Z 156 Z 158 Z 161 Z 162 Z 163 Z 165 Z 167 Z 172 Z 173 Z 174 Z 175 Z 176 Z 177 Z 180 Z 181 Z 187 Z 195 Z 196 Z 197 Z 198 Z 199 Z 200 Z 208 Z 210 Z 220 Z 225 Z 236 Z 240 Z 242 Z 248 Z 264 Z 276 Z 280 Z 295 Z 315 Inside Length (mm) 2725 2750 2775 2800 2845 2870 2900 2920 2950 2965 3000 3025 3050 3100 3150 3200 3250 3302 3350 3400 3450 3500 3550 3600 3630 3658 3700 3750 3810 3860 3910 3960 4000 4100 4115 4140 4200 4250 4370 4394 4420 4450 4470 4500 4572 4600 4750 4950 4980 5000 5030 5050 5080 5300 5330 5600 5715 6000 6100 6150 6300 6700 7000 7100 7500 8000 Datum/Pitch Length (mm) 2740 2765 2791 2816 2867 2892 2918 2943 2968 2994 3019 3045 3070 3121 3172 3222 3273 3324 3375 3426 3476 3527 3578 3629 3654 3680 3730 3781 3832 3883 3934 3984 4035 4111 4137 4162 4213 4264 4391 4416 4442 4467 4492 4518 4594 4619 4772 4975 5000 5026 5051 5077 5102 5305 5356 5610 5737 6016 6118 6169 6321 6728 7032 7134 7515 8023 CLASSICAL SECTION : A Wrapped V-Belts Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec • ATEX certified FRAS belts are available Belt Reference A 15 A 16 A 16.5 A 17 A 17.5 A 18 A 18.5 A 19 A 19.5 A 20 A 20.5 A 21 A 21.5 A 22 A 22.5 A 23 A 23.5 A 24 A 24.5 A 25 A 25.5 A 26 A 26.5 A 27 A 27.5 A 28 A 28.5 A 29 A 29.5 A 30 A 30.5 A 31 A 31.5 A 32 A 32.5 A 33 A 33.5 A 34 A 34.5 A 35 A 35.5 A 36 A 36.5 A 37 A 37.5 A 38 A 38.5 A 39 A 39.5 A 40 A 40.5 A 41 A 41.5 A 42 A 42.5 A 43 A 43.5 A 44 A 44.5 A 45 A 45.5 A 46 A 46.5 A 47 A 47.5 A 48 A 48.5 A 49 Inside Length (mm) 381 410 420 435 450 457 470 480 500 510 520 535 545 560 575 585 600 610 620 635 650 660 675 686 700 710 725 735 750 760 775 790 800 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 1090 1105 1120 1130 1143 1155 1168 1180 1190 1200 1220 1230 1250 Datum/Pitch Length (mm) 417 442 455 468 481 493 506 519 531 544 557 569 582 595 608 620 633 646 658 671 684 696 709 722 735 747 760 773 785 798 811 823 836 849 862 874 887 900 912 925 938 950 963 976 989 1001 1014 1027 1039 1052 1065 1077 1090 1103 1116 1128 1141 1154 1166 1179 1192 1204 1217 1230 1243 1255 1268 1281 Belt Length Factor (mm) 13 mm Lp to La 14 8 mm Section A Section A Li to Lp 36 Li to La 50 Manufacturing Range 330 - 9652 mm Weight per metre (Kgs) 0.106 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 13 8 75 dp (mm) Nominal Length (inches) : Li ‘PIX’ FRAS belts conforms to : Minimum Order Qty. (No. of V-Belts) 40 II 2GD c IIB X (Test report no. IB-03-4-934) A / 13x8 Belt Reference A 49.5 A 50 A 50.5 A 51 A 51.5 A 52 A 52.5 A 53 A 53.5 A 54 A 55 A 56 A 57 A 58 A 59 A 60 A 61 A 62 A 63 A 64 A 65 A 66 A 67 A 68 A 69 A 70 A 71 A 72 A 73 A 74 A 75 A 76 A 77 A 78 A 79 A 80 A 81 A 82 A 82.5 A 83 A 83.5 A 84 A 84.5 A 85 A 85.5 A 86 A 86.5 A 87 A 88 A 89 A 90 A 91 A 92 A 93 A 94 A 95 A 96 A 97 A 98 A 99 A 100 A 101 A 102 A 103 A 104 A 105 A 106 A 107 Inside Length (mm) 1260 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2095 2100 2120 2134 2150 2160 2170 2184 2200 2210 2240 2260 2286 2311 2337 2360 2388 2413 2438 2464 2500 2520 2540 2565 2591 2615 2650 2667 2700 2725 Datum/Pitch Length (mm) 1293 1306 1319 1331 1344 1357 1370 1382 1395 1408 1433 1458 1484 1509 1535 1560 1585 1611 1636 1662 1687 1712 1738 1763 1789 1814 1839 1865 1890 1916 1941 1966 1992 2017 2043 2068 2093 2119 2132 2144 2157 2170 2182 2195 2208 2220 2233 2246 2271 2297 2322 2347 2373 2398 2424 2449 2474 2500 2525 2551 2576 2601 2627 2652 2678 2703 2728 2754 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 3 Belt Reference A 108 A 109 A 110 A 111 A 112 A 113 A 114 A 115 A 116 A 117 A 118 A 119 A 120 A 122 A 124 A 126 A 128 A 130 A 132 A 134 A 136 A 138 A 140 A 142 A 143 A 144 A 145 A 146 A 148 A 150 A 152 A 154 A 156 A 158 A 160 A 161 A 162 A 163 A 165 A 167 A 172 A 173 A 174 A 175 A 176 A 177 A 180 A 181 A 187 A 195 A 196 A 197 A 198 A 199 A 200 A 208 A 210 A 220 A 225 A 236 A 240 A 242 A 248 A 264 A 276 A 280 A 295 A 315 Inside Length (mm) 2750 2775 2800 2819 2845 2870 2900 2920 2950 2965 3000 3025 3050 3100 3150 3200 3250 3302 3350 3400 3450 3500 3550 3600 3630 3658 3683 3700 3750 3810 3860 3910 3960 4000 4064 4100 4115 4140 4200 4250 4370 4394 4420 4450 4470 4500 4572 4600 4750 4950 4980 5000 5030 5050 5080 5300 5330 5600 5715 6000 6100 6150 6300 6700 7000 7100 7500 8000 Datum/Pitch Length (mm) 2779 2805 2830 2855 2881 2906 2932 2957 2982 3008 3033 3059 3084 3135 3186 3236 3287 3338 3389 3440 3490 3541 3592 3643 3668 3694 3719 3744 3795 3846 3897 3948 3998 4049 4100 4125 4151 4176 4227 4278 4405 4430 4456 4481 4506 4532 4608 4633 4786 4989 5014 5040 5065 5091 5116 5319 5370 5624 5751 6030 6132 6183 6335 6742 7046 7148 7529 8037 CLASSICAL SECTION : B Wrapped V-Belts Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215 Belt Reference B 16 B 16.5 B 17 B 17.5 B 18 B 18.5 B 19 B 19.5 B 20 B 20.5 B 21 B 21.5 B 22 B 22.5 B 23 B 23.5 B 24 B 24.5 B 25 B 25.5 B 26 B 26.5 B 27 B 27.5 B 28 B 28.5 B 29 B 29.5 B 30 B 30.5 B 31 B 31.5 B 32 B 32.5 B 33 B 33.5 B 34 B 34.5 B 35 B 35.5 B 36 B 36.5 B 37 B 37.5 B 38 B 38.5 B 39 B 39.5 B 40 B 40.5 B 41 B 41.5 B 42 B 42.5 B 43 B 43.5 B 44 Inside Length (mm) 410 420 435 450 457 470 480 500 510 520 535 545 560 575 585 600 610 620 635 650 660 675 686 700 710 725 735 750 760 775 790 800 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 1090 1105 1120 Datum/Pitch Length (mm) 449 464 475 488 500 515 526 538 551 564 576 589 602 615 627 640 653 665 678 691 703 716 729 742 754 767 780 792 805 818 830 843 856 869 881 894 907 919 932 945 957 970 983 996 1008 1021 1034 1046 1059 1072 1084 1097 1110 1123 1135 1148 1161 11 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec • ATEX certified FRAS belts are available Belt Length Factor (mm) 17 mm Lp to La 26 Section B B Section Li to Lp 43 Li to La 69 Manufacturing Range 406 - 16713 mm Weight per metre (Kgs) 0.182 Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) 40 125 dp (mm) 17 11 Nominal Length (inches) : Li ‘PIX’ FRAS belts conforms to : Minimum Order Qty. (No. of V-Belts) 30 II 2GD c IIB X (Test report no. IB-03-4-934) B / 17x11 Belt Reference B 44.5 B 45 B 45.5 B 46 B 46.5 B 47 B 47.5 B 48 B 48.5 B 49 B 49.5 B 50 B 50.5 B 51 B 51.5 B 52 B 52.5 B 53 B 53.5 B 54 B 55 B 56 B 57 B 58 B 59 B 60 B 61 B 62 B 63 B 64 B 65 B 66 B 67 B 68 B 69 B 70 B 71 B 72 B 73 B 74 B 75 B 76 B 77 B 78 B 79 B 80 B 81 B 82 B 82.5 B 83 B 83.5 B 84 B 84.5 B 85 B 86 B 86.5 B 87 Inside Length (mm) 1130 1143 1155 1168 1180 1190 1200 1220 1230 1250 1260 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2095 2100 2120 2134 2150 2160 2184 2200 2210 Datum/Pitch Length (mm) 1173 1186 1199 1211 1224 1237 1250 1262 1275 1288 1300 1313 1326 1338 1351 1364 1377 1389 1402 1415 1440 1465 1491 1516 1542 1567 1592 1618 1643 1669 1694 1719 1745 1770 1796 1821 1846 1872 1897 1923 1948 1973 1999 2024 2050 2075 2100 2126 2139 2151 2164 2177 2189 2202 2227 2240 2253 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 4 Belt Reference B 88 B 89 B 90 B 91 B 92 B 93 B 94 B 95 B 96 B 97 B 98 B 99 B 100 B 101 B 102 B 103 B 104 B 105 B 106 B 107 B 108 B 109 B 110 B 111 B 112 B 113 B 114 B 115 B 116 B 117 B 118 B 119 B 120 B 121 B 122 B 124 B 126 B 127 B 128 B 129 B 130 B 131 B 132 B 134 B 135 B 136 B 138 B 140 B 142 B 143 B 144 B 146 B 148 B 150 B 151 B 152 B 154 Inside Length (mm) 2240 2260 2286 2311 2337 2360 2388 2413 2438 2464 2500 2520 2540 2565 2591 2615 2650 2667 2700 2725 2750 2775 2800 2819 2845 2870 2900 2920 2950 2965 3000 3025 3050 3073 3100 3150 3200 3226 3250 3277 3302 3327 3350 3400 3429 3450 3500 3550 3600 3630 3658 3700 3750 3810 3835 3860 3910 Datum/Pitch Length (mm) 2278 2304 2329 2354 2380 2405 2431 2456 2481 2507 2532 2558 2583 2608 2634 2659 2685 2710 2735 2761 2786 2812 2837 2862 2888 2913 2939 2964 2989 3015 3040 3066 3091 3116 3142 3193 3243 3269 3294 3320 3345 3370 3396 3447 3472 3497 3548 3599 3650 3675 3701 3751 3802 3853 3878 3904 3955 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec • ATEX certified FRAS belts are available Belt Reference B 155 B 156 B 158 B 160 B 161 B 162 B 163 B 164 B 165 B 167 B 168 B 170 B 172 B 173 B 174 B 175 B 176 B 177 Inside Length (mm) 3937 3960 4000 4064 4100 4115 4140 4166 4200 4250 4267 4318 4370 4394 4420 4450 4470 4500 Datum/Pitch Length (mm) 3980 4005 4056 4107 4132 4158 4183 4209 4234 4285 4310 4361 4412 4437 4463 4488 4513 4539 Belt Length Factor (mm) 17 mm 11 mm CLASSICAL SECTION : B Wrapped V-Belts Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215 Lp to La 26 Section B B Section Li to Lp 43 Li to La 69 Manufacturing Range 406 - 16713 mm Weight per metre (Kgs) 0.182 Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) 40 125 dp (mm) 17 11 Nominal Length (inches) : Li ‘PIX’ FRAS belts conforms to : Minimum Order Qty. (No. of V-Belts) 30 II 2GD c IIB X (Test report no. IB-03-4-934) B / 17x11 Belt Reference B 178 B 180 B 181 B 184 B 185 B 186 B 187 B 189 B 190 B 191 B 192 B 195 B 196 B 197 B 198 B 199 B 200 B 204 Inside Length (mm) 4520 4572 4600 4674 4699 4724 4750 4800 4825 4850 4877 4950 4980 5000 5030 5050 5080 5182 Datum/Pitch Length (mm) 4564 4615 4640 4717 4742 4767 4793 4844 4869 4894 4920 4996 5021 5047 5072 5098 5123 5182 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 5 Belt Reference B 208 B 210 B 216 B 220 B 224 B 225 B 226 B 229 B 236 B 238 B 240 B 242 B 248 B 264 B 276 B 280 B 295 B 298 B 315 Inside Length (mm) 5300 5330 5486 5600 5690 5715 5740 5816 6000 6045 6100 6150 6300 6700 7000 7100 7500 7569 8000 Datum/Pitch Length (mm) 5326 5377 5529 5631 5733 5758 5783 5860 6037 6088 6139 6190 6342 6749 7053 7155 7536 7612 8044 22 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec • ATEX certified FRAS belts are available Belt Reference Inside Length (mm) C 26 C 32 C 32.5 C 33 C 33.5 C 34 C 34.5 C 35 C 35.5 C 36 C 36.5 C 37 C 37.5 C 38 C 38.5 C 39 C 39.5 C 40 C 40.5 C 41 C 41.5 C 42 C 42.5 C 43 C 43.5 C 44 C 44.5 C 45 C 45.5 C 46 C 46.5 C 47 C 47.5 C 48 C 48.5 C 49 C 49.5 C 50 C 50.5 C 51 C 51.5 C 52 C 52.5 C 53 C 53.5 C 54 C 55 C 56 C 57 C 58 C 59 C 60 C 61 C 62 C 63 C 64 C 65 C 66 C 67 C 68 C 69 C 70 C 71 C 72 C 73 C 74 C 75 C 76 660 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 1090 1105 1120 1130 1143 1155 1168 1180 1190 1200 1220 1230 1250 1260 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 Datum/Pitch Length (mm) 716 869 882 894 907 920 932 945 958 970 983 996 1009 1021 1034 1047 1059 1072 1085 1097 1110 1123 1136 1148 1161 1174 1186 1199 1212 1224 1237 1250 1263 1275 1288 1301 1313 1326 1339 1351 1364 1377 1390 1402 1415 1428 1453 1478 1504 1529 1555 1580 1605 1631 1656 1682 1707 1732 1758 1783 1809 1834 1859 1885 1910 1936 1961 1986 Belt Length Factor (mm) 14 mm CLASSICAL SECTION : C Wrapped V-Belts Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215 Lp to La 32 Section C C Section Li to Lp 56 Li to La 88 Manufacturing Range 788 - 16713 mm Weight per metre (Kgs) 0.298 Dimensions Angle Rec. Min Minimum Order Qty. Degree Pulley Dia. (No. of V-Belts) Topwidth(mm) Thickness(mm) 40 200 dp (mm) 24 22 14 Nominal Length (inches) : Li ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) C / 22x14 Belt Reference Inside Length (mm) C 77 C 78 C 79 C 80 C 81 C 82 C 82.5 C 83 C 83.5 C 84 C 84.5 C 85 C 86 C 86.5 C 87 C 88 C 89 C 90 C 91 C 92 C 93 C 94 C 95 C 96 C 97 C 98 C 99 C 100 C 101 C 102 C 103 C 104 C 105 C 106 C 107 C 108 C 109 C 110 C 111 C 112 C 113 C 114 C 115 C 116 C 117 C 118 C 119 C 120 C 122 C 124 C 125 C 126 C 128 C 130 C 132 C 134 C 136 C 138 C 140 C 142 C 143 C 144 C 146 C 148 C 150 C 152 C 154 C 156 1956 1980 2000 2032 2060 2083 2095 2100 2120 2134 2150 2160 2184 2200 2210 2240 2260 2286 2311 2337 2360 2388 2413 2438 2464 2500 2520 2540 2565 2591 2615 2650 2667 2700 2725 2750 2775 2800 2819 2845 2870 2900 2920 2950 2965 3000 3025 3050 3100 3150 3175 3200 3250 3302 3350 3400 3450 3500 3550 3600 3630 3658 3700 3750 3810 3860 3910 3960 Datum/Pitch Length (mm) 2012 2037 2063 2088 2113 2139 2152 2164 2177 2190 2202 2215 2240 2253 2266 2291 2317 2342 2367 2393 2418 2444 2469 2494 2520 2545 2571 2596 2621 2647 2672 2698 2723 2748 2774 2799 2825 2850 2875 2901 2926 2952 2977 3002 3028 3053 3079 3104 3155 3206 3231 3256 3307 3358 3409 3460 3510 3561 3612 3663 3688 3714 3764 3815 3866 3917 3968 4018 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 6 Belt Reference C 158 C 160 C 161 C 162 C 163 C 164 C 165 C 167 C 168 C 170 C 172 C 173 C 174 C 175 C 176 C 177 C 180 C 181 C 184 C 185 C 187 C 188 C 190 C 192 C 195 C 196 C 197 C 198 C 199 C 200 C 204 C 205 C 208 C 210 C 211 C 212 C 214 C 215 C 216 C 220 C 222 C 224 C 225 C 228 C 236 C 238 C 240 C 242 C 248 C 250 C 255 C 260 C 264 C 265 C 270 C 276 C 280 C 285 C 295 C 300 C 314 C 315 C 324 C 328 C 334 C 354 C 356 C 360 Inside Length (mm) 4000 4064 4100 4115 4140 4166 4200 4250 4267 4318 4370 4394 4420 4450 4470 4500 4572 4600 4674 4699 4750 4775 4825 4877 4950 4980 5000 5030 5050 5080 5182 5200 5300 5330 5360 5385 5435 5461 5486 5600 5639 5690 5715 5800 6000 6045 6100 6150 6300 6350 6477 6604 6700 6731 6858 7000 7100 7239 7500 7620 7976 8000 8230 8331 8484 9000 9050 9144 Datum/Pitch Length (mm) 4069 4120 4145 4171 4196 4222 4247 4298 4323 4374 4425 4450 4476 4501 4526 4552 4628 4653 4730 4755 4806 4831 4882 4933 5009 5034 5060 5085 5111 5136 5238 5263 5339 5390 5415 5441 5492 5517 5542 5644 5695 5746 5771 5847 6050 6101 6152 6203 6355 6406 6533 6660 6762 6787 6914 7066 7168 7295 7549 7676 8032 8057 8286 8387 8540 9048 9098 9200 • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec • ATEX certified FRAS belts are available Belt Reference Inside Length (mm) Datum/Pitch Length (mm) D 45 D 45.5 D 46 D 46.5 D 47 D 47.5 D 48 D 48.5 D 49 D 49.5 D 50 D 50.5 D 51 D 51.5 D 52 D 52.5 D 53 D 53.5 D 54 D 55 D 56 D 57 D 58 D 59 D 60 D 61 D 62 D 63 D 64 D 65 D 66 D 67 D 68 D 69 D 70 D 71 D 72 D 73 D 74 D 75 D 76 D 77 D 78 D 79 D 80 D 81 D 82 D 82.5 D 83 D 83.5 D 84 D 84.5 D 85 D 86 D 86.5 D 87 D 88 D 89 1143 1155 1168 1180 1190 1200 1220 1230 1250 1260 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2095 2100 2120 2134 2150 2160 2184 2200 2210 2240 2260 1222 1235 1247 1260 1273 1286 1298 1311 1324 1336 1349 1362 1374 1387 1400 1413 1425 1438 1451 1476 1501 1527 1552 1578 1603 1628 1654 1679 1705 1730 1755 1781 1806 1832 1857 1882 1908 1933 1959 1984 2009 2035 2060 2086 2111 2136 2162 2175 2187 2200 2213 2225 2238 2263 2276 2289 2314 2340 32 mm Belt Length Factor (mm) 19 mm CLASSICAL SECTION : D Wrapped V-Belts Standard : ISO 4183, ISO 4184, BS 3790, Features : DIN 2215 Lp to La 40 Section D Li to Lp 79 Li to La 119 Weight per metre (Kgs) 0.608 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 19 32 40 355 dp(mm) Nominal Length (inches) : Li ‘PIX’ FRAS belts conforms to : D Section Manufacturing Range 1125 - 16815 mm Minimum Order Qty. (No. of V-Belts) 15 II 2GD c IIB X (Test report no. IB-03-4-934) D / 32x19 Belt Reference D 90 D 91 D 92 D 93 D 94 D 95 D 96 D 97 D 98 D 99 D 100 D 101 D 102 D 103 D 104 D 105 D 106 D 107 D 108 D 109 D 110 D 112 D 113 D 114 D 115 D 116 D 117 D 118 D 119 D 120 D 122 D 124 D 126 D 128 D 130 D 132 D 134 D 136 D 137 D 138 D 140 D 142 D 143 D 144 D 146 D 148 D 150 D 152 D 154 D 156 D 158 D 161 D 162 D 163 D 165 D 167 D 168 D 169 Inside Length (mm) Datum/Pitch Length (mm) 2286 2311 2337 2360 2388 2413 2438 2464 2500 2520 2540 2565 2591 2615 2650 2667 2700 2725 2750 2775 2800 2845 2870 2900 2920 2950 2965 3000 3025 3050 3100 3150 3200 3250 3302 3350 3400 3450 3480 3500 3550 3600 3630 3658 3700 3750 3810 3860 3910 3960 4000 4100 4115 4140 4200 4250 4267 4293 2365 2390 2416 2441 2467 2492 2517 2543 2568 2594 2619 2644 2670 2695 2721 2746 2771 2797 2822 2848 2873 2924 2949 2975 3000 3025 3051 3076 3102 3127 3178 3229 3279 3330 3381 3432 3483 3533 3559 3584 3635 3686 3711 3737 3787 3838 3889 3940 3991 4041 4092 4168 4194 4219 4270 4321 4346 4372 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 7 Belt Reference D 172 D 173 D 174 D 175 D 176 D 177 D 180 D 181 D 187 D 190 D 195 D 196 D 197 D 198 D 199 D 200 D 204 D 205 D 208 D 210 D 220 D 225 D 228 D 236 D 238 D 240 D 242 D 248 D 253 D 254 D 255 D 264 D 268 D 270 D 272 D 276 D 280 D 285 D 295 D 297 D 300 D 314 D 315 D 320 D 326 D 330 D 335 D 345 D 351 D 354 D 358 D 360 D 364 D 374 D 390 D 394 D 441 D 478 Inside Length (mm) Datum/Pitch Length (mm) 4370 4394 4420 4450 4470 4500 4572 4600 4750 4825 4950 4980 5000 5030 5050 5080 5182 5200 5300 5330 5600 5715 5800 6000 6045 6100 6150 6300 6426 6452 6477 6700 6807 6858 6900 7000 7100 7239 7500 7550 7620 7976 8000 8128 8280 8385 8510 8763 8915 9000 9100 9144 9246 9500 9906 10000 11200 12141 4448 4473 4499 4524 4549 4575 4651 4676 4829 4905 5032 5057 5083 5108 5134 5159 5261 5286 5362 5413 5667 5794 5870 6073 6124 6175 6226 6378 6505 6531 6556 6785 6886 6937 6988 7089 7191 7318 7572 7623 7699 8055 8080 8207 8359 8464 8590 8842 8994 9070 9172 9223 9325 9579 9985 10079 11280 12220 CLASSICAL SECTION : 20 Wrapped V-Belts Standard : DIN 2215 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec • ATEX certified FRAS belts are available Belt Length Factor (mm) 20 mm Section 12.5 mm 20 Inside Length (inches) 20 x 896 20 x 900 20 x 1000 20 x 1060 20 x 1120 20 x 1180 20 x 1250 20 x 1320 20 x 1400 20 x 1500 20 x 1600 20 x 1700 20 x 1800 20 x 1900 20 x 2000 20 x 2120 20 x 2240 35.28 35.43 39.37 41.73 44.09 46.46 49.21 51.97 55.12 59.06 62.99 66.93 70.87 74.80 78.74 83.46 88.19 Li to Lp 48 Li to La 79 Manufacturing Range 896 - 9525 mm 944 948 1048 1108 1168 1228 1298 1368 1448 1548 1648 1748 1848 1948 2048 2168 2288 CLASSICAL SECTION : 25 Wrapped V-Belts Standard : DIN 2215 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec • ATEX certified FRAS belts are available Belt Reference 20xLi (mm) Inside Length (inches) 20 x 2360 20 x 2500 20 x 2650 20 x 2800 20 x 3000 20 x 3150 20 x 3350 20 x 3550 20 x 3750 20 x 4000 20 x 4250 20 x 4500 20 x 5000 20 x 5300 20 x 5600 20 x 6000 20 x 6100 92.91 98.43 104.33 110.24 118.11 124.02 131.89 139.76 147.64 157.48 167.32 177.17 196.85 208.66 220.47 236.22 240.15 2408 2548 2698 2848 3048 3198 3398 3598 3798 4048 4298 4548 5048 5348 5648 6048 6148 Section 25 Li to Lp 61 Inside Length (inches) 20 x 6150 20 x 6300 20 x 6350 20 x 6550 20 x 6700 20 x 6750 20 x 7000 20 x 7100 20 x 7250 20 x 7500 20 x 8000 20 x 8300 20 x 8600 20 x 9000 20 x 9525 242.13 248.03 250.00 257.87 263.77 265.75 275.50 279.50 285.43 295.28 314.96 326.77 338.58 354.33 375.00 Li to La 100 Manufacturing Range 1448 - 16637 mm Inside Length (inches) Datum/Pitch Length (mm) 25 x 1400 25 x 1448 25 x 1500 25 x 1600 25 x 1700 25 x 1800 25 x 1850 25 x 1900 25 x 2000 25 x 2120 25 x 2240 25 x 2360 25 x 2500 25 x 2650 25 x 2700 25 x 2800 25 x 3000 25 x 3150 25 x 3350 25 x 3450 25 x 3550 55.12 57.00 59.06 62.99 66.93 70.87 72.83 74.80 78.74 83.46 88.19 92.91 98.43 104.33 106.30 110.24 118.11 124.02 131.89 135.83 139.76 1461 1509 1561 1661 1761 1861 1911 1961 2061 2181 2301 2421 2561 2711 2761 2861 3061 3211 3411 3511 3611 Inside Length (inches) Datum/Pitch Length (mm) 25 x 3750 25 x 4000 25 x 4250 25 x 4450 25 x 4500 25 x 4750 25 x 5000 25 x 5300 25 x 5600 25 x 6000 25 x 6300 25 x 6700 25 x 7100 25 x 7500 25 x 8000 25 x 8500 25 x 9000 25 x 9250 25 x 9500 25 x 9750 25x10000 147.64 157.48 167.32 175.20 177.17 187.01 196.85 208.66 220.47 236.22 248.03 263.78 279.53 295.28 314.96 334.65 354.33 364.17 374.02 383.86 393.70 3811 4061 4311 4511 4561 4811 5061 5361 5661 6061 6361 6761 7161 7561 8061 8561 9061 9311 9561 9811 10061 8 Minimum Order Qty. (No. of V-Belts) 40 25 / 25x16 Belt Reference 25xLi (mm) • Prices on request • Non standard stock items are available on request 6198 6348 6398 6598 6748 6798 7048 7148 7298 7548 8048 8348 8648 9048 9573 II 2GD c IIB X (Test report no. IB-03-4-934) 25 / 25x16 Belt Reference 25xLi (mm) Datum/Pitch Length (mm) Weight per metre (Kgs) 0.393 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 25 16 250 dp (mm) Nominal Length (inches) : Li ‘PIX’ FRAS belts conforms to : Section : 25 25 / 25x16 Belt Reference 20xLi (mm) Belt Length Factor (mm) Lp to La 39 16 mm 30 20 / 20x12.5 Datum/Pitch Length (mm) 25 mm Minimum Order Qty. (No. of V-Belts) II 2GD c IIB X (Test report no. IB-03-4-934) 20 / 20x12.5 Datum/Pitch Length (mm) Weight per metre (Kgs) 0.243 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 160 dp (mm) 20 12.5 Nominal Length (inches) : Li ‘PIX’ FRAS belts conforms to : Section : 20 20 / 20x12.5 Belt Reference 20xLi (mm) Lp to La 31 Belt Reference 25xLi (mm) 25x10250 25x10500 25x10750 25x11000 25x11250 25x11500 25x11750 25x12000 25x12250 25x12550 25x12750 25x13000 25x13250 25x13500 25x13750 25x14000 25x14250 25x14500 Inside Length (inches) Datum/Pitch Length (mm) 403.54 413.39 423.23 433.07 442.91 452.76 462.60 472.44 482.28 494.09 501.97 511.81 521.65 531.50 541.34 551.18 561.02 570.87 10311 10561 10811 11061 11311 11561 11811 12061 12311 12611 12811 13061 13311 13561 13811 14061 14311 14561 38 mm CLASSICAL SECTION : E Wrapped V-Belts Standard : ISO 4183, ISO 4184, BS 3790, Features : DIN 2215 23 mm • Oil resistant• Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec • ATEX certified FRAS belts are available Belt Length Factor (mm) Lp to La 53 Section E Li to Lp 92 Li to La 145 Manufacturing Range 2159 - 16713 mm Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 500 dp (mm) 38 23 Nominal Length (inches) : Li ‘PIX’ FRAS belts conforms to : Belt Reference E 118 E 144 E 145 E 158 E 180 E 197 E 210 E 220 E 226 3000 3658 3683 4000 4572 5000 5330 5600 5740 3092 3750 3772 4092 4664 5092 5422 5692 5832 10 II 2GD c IIB X (Test report no. IB-03-4-934) E / 38x23 Datum/Pitch Length (mm) Minimum Order Qty. (No. of V-Belts) E Section E / 38x23 Inside Length (mm) Weight per metre (Kgs) 0.900 E / 38x23 Belt Reference Inside Length (mm) Datum/Pitch Length (mm) E 236 E 240 E 248 E 270 E 280 E 295 E 300 E 315 E 330 6000 6100 6300 6858 7100 7500 7620 8000 8380 6092 6192 6392 6952 7192 7592 7712 8093 8474 • Prices on request • Non standard stock items are available on request 9 Belt Reference Inside Length (mm) Datum/Pitch Length (mm) E 354 E 360 E 390 E 394 E 420 E 441 E 480 E 492 9000 9144 9908 10010 10670 11200 12190 12500 9084 9236 10002 10100 10760 11293 12284 12589 WEDGE SECTION : SPZ Wrapped V-Belts Standard : BS 3790 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 42 m/sec • ATEX certified FRAS belts are available SPZ / 10x8 Belt Length Factor (mm) Lp to La 13 10 mm Section 8 mm SPZ SPZ Section Li to Lp 37 Li to La 50 Manufacturing Range 365 - 4953 mm Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) 40 67 dp (mm) 10 8 Weight per metre (Kgs) 0.070 Minimum Order Qty. (No. of V-Belts) 50 Nominal Length : Pitch length Lp in mm ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) SPZ / 10x8 SPZ / 10x8 Belt Reference Datum/Pitch Length (mm) Belt Reference Datum/Pitch Length (mm) SPZ 487 SPZ 500 SPZ 512 SPZ 530 SPZ 562 SPZ 575 SPZ 580 SPZ 587 SPZ 600 SPZ 612 SPZ 625 SPZ 630 SPZ 637 SPZ 662 SPZ 670 SPZ 687 SPZ 700 SPZ 710 SPZ 722 SPZ 737 SPZ 750 SPZ 760 SPZ 772 SPZ 775 SPZ 787 SPZ 800 SPZ 812 SPZ 825 SPZ 837 SPZ 850 SPZ 862 SPZ 875 SPZ 887 SPZ 900 SPZ 912 SPZ 922 SPZ 925 SPZ 937 SPZ 940 SPZ 950 SPZ 962 SPZ 975 SPZ 987 SPZ 1000 SPZ 1010 SPZ 1012 SPZ 1024 SPZ 1030 SPZ 1037 SPZ 1047 SPZ 1060 SPZ 1075 SPZ 1077 SPZ 1080 SPZ 1087 SPZ 1100 SPZ 1107 SPZ 1112 487 500 512 530 562 575 580 587 600 612 625 630 637 662 670 687 700 710 722 737 750 760 772 775 787 800 812 825 837 850 862 875 887 900 912 922 925 937 940 950 962 975 987 1000 1010 1012 1024 1030 1037 1047 1060 1075 1077 1080 1087 1100 1107 1112 SPZ 1120 SPZ 1137 SPZ 1140 SPZ 1147 SPZ 1150 SPZ 1162 SPZ 1171 SPZ 1180 SPZ 1187 SPZ 1200 SPZ 1212 SPZ 1220 SPZ 1237 SPZ 1250 SPZ 1262 SPZ 1270 SPZ 1280 SPZ 1287 SPZ 1300 SPZ 1312 SPZ 1320 SPZ 1337 SPZ 1340 SPZ 1347 SPZ 1350 SPZ 1362 SPZ 1375 SPZ 1387 SPZ 1400 SPZ 1412 SPZ 1420 SPZ 1425 SPZ 1437 SPZ 1450 SPZ 1462 SPZ 1470 SPZ 1487 SPZ 1500 SPZ 1512 SPZ 1520 SPZ 1537 SPZ 1550 SPZ 1560 SPZ 1562 SPZ 1580 SPZ 1587 SPZ 1600 SPZ 1612 SPZ 1620 SPZ 1637 SPZ 1650 SPZ 1662 SPZ 1687 SPZ 1700 SPZ 1737 SPZ 1750 SPZ 1762 SPZ 1787 1120 1137 1140 1147 1150 1162 1171 1180 1187 1200 1212 1220 1237 1250 1262 1270 1280 1287 1300 1312 1320 1337 1340 1347 1350 1362 1375 1387 1400 1412 1420 1425 1437 1450 1462 1470 1487 1500 1512 1520 1537 1550 1560 1562 1580 1587 1600 1612 1620 1637 1650 1662 1687 1700 1737 1750 1762 1787 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 10 Belt Reference SPZ 1800 SPZ 1812 SPZ 1837 SPZ 1850 SPZ 1862 SPZ 1887 SPZ 1900 SPZ 1912 SPZ 1937 SPZ 1950 SPZ 1962 SPZ 1987 SPZ 2000 SPZ 2030 SPZ 2037 SPZ 2050 SPZ 2062 SPZ 2087 SPZ 2100 SPZ 2120 SPZ 2125 SPZ 2137 SPZ 2150 SPZ 2160 SPZ 2175 SPZ 2180 SPZ 2187 SPZ 2237 SPZ 2240 SPZ 2250 SPZ 2262 SPZ 2280 SPZ 2287 SPZ 2300 SPZ 2360 SPZ 2400 SPZ 2410 SPZ 2430 SPZ 2437 SPZ 2500 SPZ 2540 SPZ 2580 SPZ 2600 SPZ 2650 SPZ 2690 SPZ 2720 SPZ 2800 SPZ 2840 SPZ 2900 SPZ 3000 SPZ 3150 SPZ 3170 SPZ 3250 SPZ 3350 SPZ 3450 SPZ 3550 Datum/Pitch Length (mm) 1800 1812 1837 1850 1862 1887 1900 1912 1937 1950 1962 1987 2000 2030 2037 2050 2062 2087 2100 2120 2125 2137 2150 2160 2175 2180 2187 2237 2240 2250 2262 2280 2287 2300 2360 2400 2410 2430 2437 2500 2540 2580 2600 2650 2690 2720 2800 2840 2900 3000 3150 3170 3250 3350 3450 3550 WEDGE SECTION : SPA Wrapped V-Belts Standard : BS 3790 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 42 m/sec • ATEX certified FRAS belts are available SPA / 13x10 Belt Length Factor (mm) 13 mm Lp to La 18 10 mm SPA Section Manufacturing Range 576 - 9246 mm Weight per metre (Kgs) 0.119 Dimensions Angle Rec. Min Minimum Order Qty. (No. of V-Belts) Topwidth(mm) Thickness(mm) Degree Pulley Dia. SPA 40 100 dp (mm) 13 10 40 Nominal Length : Pitch length Lp in mm ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) SPA / 13x10 Belt Reference Belt Reference Datum/Pitch Length (mm) SPA 732 SPA 750 SPA 757 SPA 775 SPA 782 SPA 800 SPA 807 SPA 825 SPA 832 SPA 850 SPA 857 SPA 875 SPA 882 SPA 900 SPA 907 SPA 925 SPA 932 SPA 950 SPA 957 SPA 975 SPA 982 SPA 1000 SPA 1007 SPA 1025 SPA 1032 SPA 1050 SPA 1060 SPA 1082 SPA 1085 SPA 1090 SPA 1100 SPA 1107 SPA 1120 SPA 1132 SPA 1150 SPA 1157 SPA 1160 SPA 1180 SPA 1182 SPA 1200 SPA 1207 SPA 1220 SPA 1232 SPA 1250 SPA 1257 SPA 1272 SPA 1280 SPA 1282 SPA 1300 SPA 1307 SPA 1320 SPA 1332 SPA 1357 SPA 1360 SPA 1367 732 750 757 775 782 800 807 825 832 850 857 875 882 900 907 925 932 950 957 975 982 1000 1007 1025 1032 1050 1060 1082 1085 1090 1100 1107 1120 1132 1150 1157 1160 1180 1182 1200 1207 1220 1232 1250 1257 1272 1280 1282 1300 1307 1320 1332 1357 1360 1367 SPA 1382 SPA 1400 SPA 1407 SPA 1425 SPA 1432 SPA 1450 SPA 1457 SPA 1482 SPA 1500 SPA 1507 SPA 1525 SPA 1532 SPA 1550 SPA 1557 SPA 1582 SPA 1600 SPA 1607 SPA 1632 SPA 1650 SPA 1657 SPA 1682 SPA 1700 SPA 1707 SPA 1732 SPA 1750 SPA 1757 SPA 1782 SPA 1800 SPA 1807 SPA 1832 SPA 1850 SPA 1857 SPA 1882 SPA 1900 SPA 1907 SPA 1925 SPA 1932 SPA 1950 SPA 1957 SPA 1982 SPA 2000 SPA 2032 SPA 2057 SPA 2060 SPA 2082 SPA 2107 SPA 2120 SPA 2125 SPA 2132 SPA 2150 SPA 2157 SPA 2182 SPA 2207 SPA 2232 SPA 2240 1382 1400 1407 1425 1432 1450 1457 1482 1500 1507 1525 1532 1550 1557 1582 1600 1607 1632 1650 1657 1682 1700 1707 1732 1750 1757 1782 1800 1807 1832 1850 1857 1882 1900 1907 1925 1932 1950 1957 1982 2000 2032 2057 2060 2082 2107 2120 2125 2132 2150 2157 2182 2207 2232 2240 11 Li to La 63 Section Datum/Pitch Length (mm) • Prices on request • Non standard stock items are available on request Li to Lp 45 SPA / 13x10 Belt Reference Datum/Pitch Length (mm) SPA 2250 SPA 2267 SPA 2282 SPA 2300 SPA 2307 SPA 2332 SPA 2350 SPA 2360 SPA 2382 SPA 2432 SPA 2475 SPA 2482 SPA 2492 SPA 2500 SPA 2532 SPA 2582 SPA 2607 SPA 2625 SPA 2632 SPA 2650 SPA 2682 SPA 2732 SPA 2782 SPA 2800 SPA 2832 SPA 2847 SPA 2882 SPA 2900 SPA 2932 SPA 2982 SPA 3000 SPA 3032 SPA 3070 SPA 3082 SPA 3150 SPA 3182 SPA 3200 SPA 3250 SPA 3282 SPA 3350 SPA 3382 SPA 3450 SPA 3482 SPA 3500 SPA 3550 SPA 3600 SPA 3670 SPA 3700 SPA 3750 SPA 4000 SPA 4250 SPA 4500 SPA 4590 SPA 5000 2250 2267 2282 2300 2307 2332 2350 2360 2382 2432 2475 2482 2492 2500 2532 2582 2607 2625 2632 2650 2682 2732 2782 2800 2832 2847 2882 2900 2932 2982 3000 3032 3070 3082 3150 3182 3200 3250 3282 3350 3382 3450 3482 3500 3550 3600 3670 3700 3750 4000 4250 4500 4590 5000 WEDGE SECTION : SPB Wrapped V-Belts Standard : BS 3790 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 42 m/sec • ATEX certified FRAS belts are available SPB / 17x14 Belt Reference Datum/Pitch Length (mm) SPB 1250 SPB 1260 SPB 1280 SPB 1300 SPB 1320 SPB 1340 SPB 1360 SPB 1400 SPB 1410 SPB 1440 SPB 1450 SPB 1500 SPB 1510 SPB 1540 SPB 1550 SPB 1560 SPB 1590 SPB 1600 SPB 1650 SPB 1690 SPB 1700 SPB 1750 SPB 1780 SPB 1800 SPB 1850 SPB 1900 SPB 1950 SPB 2000 1250 1260 1280 1300 1320 1340 1360 1400 1410 1440 1450 1500 1510 1540 1550 1560 1590 1600 1650 1690 1700 1750 1780 1800 1850 1900 1950 2000 Belt Length Factor (mm) 17 mm Lp to La 28 Section 14 mm SPB Li to Lp 60 Li to La 88 Manufacturing Range 940 - 16764 mm Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) 40 160 dp (mm) 17 14 Weight per metre (Kgs) 0.214 Minimum Order Qty. (No. of V-Belts) 28 Nominal Length : Pitch length Lp in mm ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) SPB Section SPB / 17x14 SPB / 17x14 Belt Reference Datum/Pitch Length (mm) Belt Reference Datum/Pitch Length (mm) SPB 2020 SPB 2025 SPB 2030 SPB 2060 SPB 2120 SPB 2125 SPB 2150 SPB 2180 SPB 2200 SPB 2240 SPB 2275 SPB 2280 SPB 2300 SPB 2310 SPB 2360 SPB 2380 SPB 2400 SPB 2410 SPB 2430 SPB 2500 SPB 2530 SPB 2540 SPB 2580 SPB 2600 SPB 2650 SPB 2675 SPB 2680 SPB 2720 2020 2025 2030 2060 2120 2125 2150 2180 2200 2240 2275 2280 2300 2310 2360 2380 2400 2410 2430 2500 2530 2540 2580 2600 2650 2675 2680 2720 SPB 2750 SPB 2800 SPB 2840 SPB 2850 SPB 2900 SPB 2990 SPB 3000 SPB 3150 SPB 3170 SPB 3200 SPB 3250 SPB 3270 SPB 3340 SPB 3350 SPB 3450 SPB 3550 SPB 3620 SPB 3650 SPB 3750 SPB 3800 SPB 3825 SPB 3870 SPB 4000 SPB 4050 SPB 4060 SPB 4250 SPB 4310 SPB 4370 SPB / 17x14 Belt Reference Datum/Pitch Length (mm) 2750 2800 2840 2850 2900 2990 3000 3150 3170 3200 3250 3270 3340 3350 3450 3550 3620 3650 3750 3800 3825 3870 4000 4050 4060 4250 4310 4370 SPB 4500 SPB 4560 SPB 4750 SPB 4820 SPB 5000 SPB 5070 SPB 5300 SPB 5380 SPB 5600 SPB 5680 SPB 5990 SPB 6000 SPB 6300 SPB 6340 SPB 6700 SPB 6720 SPB 7100 SPB 7500 SPB 7610 SPB 7990 SPB 8000 SPB 8500 SPB 9000 SPB 9010 4500 4560 4750 4820 5000 5070 5300 5380 5600 5680 5990 6000 6300 6340 6700 6720 7100 7500 7610 7990 8000 8500 9000 9010 Belt Length Factor (mm) Manufacturing Range 1750 - 16789 mm WEDGE SECTION : SPC Wrapped V-Belts Standard : BS 3790 22 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 42 m/sec • ATEX certified FRAS belts are available SPC / 22x18 Belt Reference Datum/Pitch Length (mm) SPC 1750 SPC 2000 SPC 2120 SPC 2150 SPC 2210 SPC 2240 SPC 2360 SPC 2500 SPC 2620 SPC 2650 SPC 2800 SPC 2890 SPC 3000 1750 2000 2120 2150 2210 2240 2360 2500 2620 2650 2800 2890 3000 Lp to La 30 18 mm Section SPC SPC / 22x18 Belt Reference SPC 3150 SPC 3350 SPC 3550 SPC 3650 SPC 3700 SPC 3750 SPC 3950 SPC 4000 SPC 4100 SPC 4250 SPC 4400 SPC 4500 SPC 4750 3150 3350 3550 3650 3700 3750 3950 4000 4100 4250 4400 4500 4750 Li to La 113 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 18 224 dp (mm) 22 Weight per metre (Kgs) 0.360 Minimum Order Qty. (No. of V-Belts) 20 Nominal Length : Pitch length Lp in mm ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) SPC Section Datum/Pitch Length (mm) Li to Lp 83 SPC / 22x18 Belt Reference Belt Reference Datum/Pitch Length (mm) SPC 4900 SPC 5000 SPC 5300 SPC 5600 SPC 6000 SPC 6150 SPC 6300 SPC 6370 SPC 6500 SPC 6600 SPC 6700 SPC 7020 SPC 7100 4900 5000 5300 5600 6000 6150 6300 6370 6500 6600 6700 7020 7100 SPC 7500 SPC 8000 SPC 8300 SPC 8400 SPC 8500 SPC 9000 SPC 9500 SPC 10000 SPC 10500 SPC 10600 SPC 11200 SPC 11500 SPC 12500 7500 8000 8300 8400 8500 9000 9500 10000 10500 10600 11200 11500 12500 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 12 SPC / 22x18 Datum/Pitch Length (mm) HIGH CAPACITY NARROW V-BELTS : 3V Wrapped V-Belts Standard : RMA IP 22 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 42 m/sec Belt Length Factor (mm) 9.7 mm Lp to La 13 8 mm Section : 3V Li to Lp 37 Li to La 50 Manufacturing Range 195 - 4826 mm Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 9.7 40 8 3V 67 de (mm) Nominal Length : Belt no /10 = La in inches Section 3V / 9.7x8 Weight per metre (Kgs) 0.074 Minimum Order Qty. (No. of V-Belts) 50 Belt Reference Outside Length (mm) Belt Reference Outside Length (mm) Belt Reference Outside Length (mm) Belt Reference Outside Length (mm) 3V 250 3V 260 3V 265 3V 280 3V 300 3V 315 3V 335 3V 350 3V 355 3V 370 635 660 673 711 762 800 851 889 902 940 3V 375 3V 400 3V 425 3V 450 3V 475 3V 500 3V 520 3V 530 3V 560 3V 600 953 1016 1080 1143 1207 1270 1321 1346 1422 1524 3V 617 3V 630 3V 670 3V 710 3V 750 3V 800 3V 850 3V 900 3V 950 3V 960 1567 1600 1702 1803 1905 2032 2159 2286 2413 2438 3V 1000 3V 1060 3V 1120 3V 1180 3V 1250 3V 1320 3V 1400 3V 1425 3V 1450 3V 1500 2540 2692 2845 2997 3175 3353 3556 3620 3683 3810 HIGH CAPACITY NARROW V-BELTS : 5V Wrapped V-Belts Standard : RMA IP 22 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 42 m/sec 16 mm Belt Length Factor (mm) Lp to La 25 14 mm Li to La 85 Manufacturing Range 1219 - 16612 mm Section 5V / 16x14 Section : 5V Li to Lp 60 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 5V 40 180 de (mm) 16 14 Nominal Length : Belt no /10 = La in inches Belt Reference Outside Length (mm) Belt Reference Outside Length (mm) Belt Reference Outside Length (mm) 5V 500 5V 530 5V 560 5V 600 5V 630 5V 670 5V 710 5V 750 5V 800 1270 1346 1422 1524 1600 1702 1803 1905 2032 5V 850 5V 900 5V 950 5V 1000 5V 1060 5V 1120 5V 1180 5V 1250 5V 1320 2159 2286 2413 2540 2692 2845 2997 3175 3353 5V 1400 5V 1500 5V 1600 5V 1700 5V 1800 5V 1900 5V 2000 5V 2120 5V 2240 3556 3810 4064 4318 4572 4826 5080 5385 5690 Weight per metre (Kgs) 0.201 Minimum Order Qty. (No. of V-Belts) 30 Belt Reference Outside Length (mm) 5V 2360 5V 2500 5V 2650 5V 2800 5V 3000 5V 3150 5V 3350 5V 3550 5994 6350 6731 7112 7620 8001 8509 9017 HIGH CAPACITY NARROW V-BELTS : 8V Wrapped V-Belts Standard : RMA IP 22 25 mm Belt Length Factor (mm) Lp to La 53 23 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 42 m/sec Section 8V Section : 8V 8V / 25x23 Li to Lp 92 Li to La 145 Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) 40 317 de mm 25 23 Outside Length (mm) Belt Reference Outside Length (mm) Belt Reference Outside Length (mm) 8V 1000 8V 1060 8V 1120 8V 1180 8V 1250 8V 1320 8V 1400 8V 1500 2540 2692 2845 2997 3175 3353 3556 3810 8V 1600 8V 1700 8V 1800 8V 1900 8V 2000 8V 2120 8V 2240 8V 2360 4064 4318 4572 4826 5080 5385 5690 5994 8V 2500 8V 2650 8V 2800 8V 3000 8V 3150 8V 3350 8V 3550 8V 3750 6350 6731 7112 7620 8001 8509 9017 9525 13 Weight per metre (Kgs) 0.589 Minimum Order Qty. (No. of V-Belts). 20 Nominal Length : Belt no /10 = La in inches Belt Reference • Prices on request • Non standard stock items are available on request Manufacturing Range 2286 - 16612 mm Belt Reference Outside Length (mm) 8V 4000 8V 4250 8V 4500 8V 4750 8V 5000 8V 5250 8V 5500 10160 10795 11430 12065 12700 13335 13970 CLASSICAL SECTION : ZX PIX ‘X’ tra : Cut Edge V-Belts Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215 Features : • Oil resistant • Temperature range : -300C to +900C • Maximum belt linear speed : 50 m/sec • Available in Raw Edge Plain/Cogged Const. • ATEX certified FRAS belts are available Belt Length Factor (mm) 10 mm 6 mm Belt Reference ZX 22 ZX 24.5 ZX 25 ZX 25.5 ZX 26 ZX 26.5 ZX 27 ZX 27.5 ZX 28 ZX 28.5 ZX 29 ZX 29.5 ZX 30 ZX 30.5 ZX 31 ZX 31.5 ZX 32 ZX 32.5 ZX 33 ZX 33.5 ZX 34 ZX 34.5 ZX 35 ZX 35.5 ZX 36 ZX 36.5 ZX 37 ZX 37.5 ZX 38 ZX 38.5 ZX 39 ZX 39.5 ZX 40 ZX 40.5 ZX 41 ZX 41.5 ZX 42 ZX 42.5 560 620 635 650 660 675 686 700 710 725 735 750 760 775 790 800 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 Section ZX ZX Section ZX / 10x6 Inside Length (mm) Lp to La 16 Li to Lp 22 Li to La 38 Manufacturing Range 24 - 200 inches Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 36 10 6 40 dp(mm) 582 642 657 672 682 697 708 722 732 747 757 772 782 797 812 822 837 847 862 872 887 897 912 922 936 947 962 972 987 997 1012 1022 1038 1052 1063 1072 1087 1102 Belt Reference ZX 43 ZX 43.5 ZX 44 ZX 44.5 ZX 45 ZX 45.5 ZX 46 ZX 46.5 ZX 47 ZX 47.5 ZX 48 ZX 48.5 ZX 49 ZX 49.5 ZX 50 ZX 50.5 ZX 51 ZX 51.5 ZX 52 ZX 52.5 ZX 53 ZX 53.5 ZX 54 ZX 55 ZX 56 ZX 57 ZX 58 ZX 59 ZX 60 ZX 61 ZX 62 ZX 63 ZX 64 ZX 65 ZX 66 ZX 67 ZX 68 ZX 69 Minimum Order Qty. (No. of V-Belts) 40 Nominal Length (Inches) : Inside length ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) ZX / 10x6 Datum/Pitch Length (mm) Weight per metre (Kgs) 0.056 Inside Length (mm) 1090 1105 1120 1130 1143 1155 1168 1180 1190 1200 1220 1230 1250 1260 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 ZX / 10x6 Datum/Pitch Length (mm) 1112 1127 1142 1152 1165 1177 1190 1202 1212 1222 1242 1252 1272 1282 1292 1307 1322 1332 1342 1357 1372 1382 1397 1422 1444 1472 1497 1522 1547 1572 1597 1622 1647 1672 1698 1722 1747 1772 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 14 Belt Reference ZX 70 ZX 71 ZX 72 ZX 73 ZX 74 ZX 75 ZX 76 ZX 77 ZX 78 ZX 79 ZX 80 ZX 81 ZX 82 ZX 82.5 ZX 83 ZX 83.5 ZX 84 ZX 84.5 ZX 85 ZX 86 ZX 86.5 ZX 87 ZX 88 ZX 89 ZX 90 ZX 91 ZX 92 ZX 93 ZX 94 ZX 95 ZX 96 ZX 97 ZX 98 ZX 99 ZX 100 Inside Length (mm) 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2095 2100 2120 2134 2150 2160 2184 2200 2210 2240 2260 2286 2311 2337 2360 2388 2413 2438 2464 2500 2520 2540 Datum/Pitch Length (mm) 1797 1822 1852 1876 1902 1922 1952 1978 2002 2022 2054 2082 2105 2117 2122 2142 2156 2172 2182 2206 2222 2232 2262 2282 2308 2333 2359 2382 2410 2435 2460 2486 2522 2542 2562 CLASSICAL SECTION : AX PIX ‘X’ tra : Cut Edge V-Belts Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215 Features : • Oil resistant • Temperature range : -300C to +900C • Maximum belt linear speed : 50 m/sec • Available in Raw Edge Plain/Cogged Const. • ATEX certified FRAS belts are available Belt Reference AX 24 AX 24.5 AX 25 AX 25.5 AX 26 AX 26.5 AX 27 AX 27.5 AX 28 AX 28.5 AX 29 AX 29.5 AX 30 AX 30.5 AX 31 AX 31.5 AX 32 AX 32.5 AX 33 AX 33.5 AX 34 AX 34.5 AX 35 AX 35.5 AX 36 AX 36.5 AX 37 AX 37.5 AX 38 AX 38.5 AX 39 AX 39.5 AX 40 AX 40.5 AX 41 AX 41.5 AX 42 AX 42.5 AX 43 AX 43.5 AX 44 AX 44.5 AX 45 AX 45.5 AX 46 AX 46.5 610 620 635 650 660 675 686 700 710 725 735 750 760 775 790 800 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 1090 1105 1120 1130 1143 1155 1168 1180 Lp to La 14 8 mm Section AX AX Section Li to Lp 36 Li to La 50 Manufacturing Range 24 - 200 inches Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 36 13 8 60 dp (mm) AX / 13x8 Datum/Pitch Length (mm) 646 658 671 684 696 709 722 735 747 760 773 785 798 811 823 836 849 862 874 887 900 912 925 938 950 963 976 989 1001 1014 1027 1039 1052 1065 1077 1090 1103 1116 1128 1141 1154 1166 1179 1192 1204 1217 Weight per metre (Kgs) 0.106 Minimum Order Qty. (No. of V-Belts) 30 Nominal Length (Inches) : Inside length ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) AX / 13x8 Inside Length (mm) Belt Length Factor (mm) 13 mm Belt Reference AX 47 AX 47.5 AX 48 AX 48.5 AX 49 AX 49.5 AX 50 AX 50.5 AX 51 AX 51.5 AX 52 AX 52.5 AX 53 AX 53.5 AX 54 AX 55 AX 56 AX 57 AX 58 AX 59 AX 60 AX 61 AX 62 AX 63 AX 64 AX 65 AX 66 AX 67 AX 68 AX 69 AX 70 AX 71 AX 72 AX 73 AX 74 AX 75 AX 76 AX 77 AX 78 AX 79 AX 80 AX 81 AX 82 AX 82.5 AX 83 AX 83.5 Inside Length (mm) 1190 1200 1220 1230 1250 1260 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2095 2100 2120 AX / 13x8 Datum/Pitch Length (mm) 1230 1243 1255 1268 1281 1293 1306 1319 1331 1344 1357 1370 1382 1395 1408 1433 1458 1484 1509 1535 1560 1585 1611 1636 1662 1687 1712 1738 1763 1789 1814 1839 1865 1890 1916 1941 1966 1992 2017 2043 2068 2093 2119 2132 2144 2157 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 15 Belt Reference AX 84 AX 84.5 AX 85 AX 86 AX 86.5 AX 87 AX 88 AX 89 AX 90 AX 91 AX 92 AX 93 AX 94 AX 95 AX 96 AX 97 AX 98 AX 99 AX 100 AX 101 AX 102 AX 103 AX 104 AX 105 AX 106 AX 107 AX 108 AX 109 AX 110 AX 112 AX 113 AX 114 AX 115 AX 116 AX 117 AX 118 AX 119 AX 120 AX 122 AX 124 AX 126 AX 128 AX 130 AX 132 Inside Length (mm) 2134 2150 2160 2184 2200 2210 2240 2260 2286 2311 2337 2360 2388 2413 2438 2464 2500 2520 2540 2565 2591 2615 2650 2667 2700 2725 2750 2775 2800 2845 2870 2900 2920 2950 2965 3000 3025 3050 3100 3150 3200 3250 3302 3350 Datum/Pitch Length (mm) 2170 2182 2195 2220 2233 2246 2271 2297 2322 2347 2373 2398 2424 2449 2474 2500 2525 2551 2576 2601 2627 2652 2678 2703 2728 2754 2779 2805 2830 2881 2906 2932 2957 2982 3008 3033 3059 3084 3135 3186 3236 3287 3338 3389 CLASSICAL SECTION : BX PIX ‘X’ tra : Cut Edge V-Belts Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215 Features : • Oil resistant • Temperature range : -300C to +900C • Maximum belt linear speed : 50 m/sec • Available in Raw Edge Plain/Cogged Const. • ATEX certified FRAS belts are available Belt Reference BX 24 BX 24.5 BX 25 BX 25.5 BX 26 BX 26.5 BX 27 BX 27.5 BX 28 BX 28.5 BX 29 BX 29.5 BX 30 BX 30.5 BX 31 BX 31.5 BX 32 BX 32.5 BX 33 BX 33.5 BX 34 BX 34.5 BX 35 BX 35.5 BX 36 BX 36.5 BX 37 BX 37.5 BX 38 BX 38.5 BX 39 BX 39.5 BX 40 BX 40.5 BX 41 BX 41.5 BX 42 BX 42.5 BX 43 BX 43.5 BX 44 BX 44.5 BX 45 BX 45.5 BX 46 BX 46.5 BX 47 BX 47.5 BX 48 BX 48.5 BX 49 BX 49.5 17 mm Belt Length Factor (mm) Lp to La 26 Section 11 mm BX BX Section BX / 17x11 Inside Length (mm) Inside Length (mm) 610 620 635 650 660 675 686 700 710 725 735 750 760 775 790 800 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 1090 1105 1120 1130 1143 1155 1168 1180 1190 1200 1220 1230 1250 1260 653 665 678 691 703 716 729 742 754 767 780 792 805 818 830 843 856 869 881 894 907 919 932 945 957 970 983 996 1008 1021 1034 1046 1059 1072 1084 1097 1110 1123 1135 1148 1161 1173 1186 1199 1211 1224 1237 1250 1262 1275 1288 1300 Belt Reference BX 50 BX 50.5 BX 51 BX 51.5 BX 52 BX 52.5 BX 53 BX 53.5 BX 54 BX 55 BX 56 BX 57 BX 58 BX 59 BX 60 BX 61 BX 62 BX 63 BX 64 BX 65 BX 66 BX 67 BX 68 BX 69 BX 70 BX 71 BX 72 BX 73 BX 74 BX 75 BX 76 BX 77 BX 78 BX 79 BX 80 BX 81 BX 82 BX 82.5 BX 83 BX 83.5 BX 84 BX 84.5 BX 85 BX 86 BX 86.5 BX 87 BX 88 BX 89 BX 90 BX 91 BX 92 BX 93 Li to La 69 Manufacturing Range 24 - 200 inches Weight per metre (Kgs) 0.174 Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) 36 100 dp (mm) 17 11 Minimum Order Qty. (No. of V-Belts) 25 Nominal Length (Inches) : Inside length ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) BX / 17x11 Datum/Pitch Length (mm) Li to Lp 43 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2095 2100 2120 2134 2150 2160 2184 2200 2210 2240 2260 2286 2311 2337 2360 BX / 17x11 Datum/Pitch Length (mm) 1313 1326 1338 1351 1364 1377 1389 1402 1415 1440 1465 1491 1516 1542 1567 1592 1618 1643 1669 1694 1719 1745 1770 1796 1821 1846 1872 1897 1923 1948 1973 1999 2024 2050 2075 2100 2126 2139 2151 2164 2177 2189 2202 2227 2240 2253 2278 2304 2329 2354 2380 2405 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 16 Belt Reference BX 94 BX 95 BX 96 BX 96.5 BX 97 BX 98 BX 99 BX 100 BX 101 BX 102 BX 103 BX 104 BX 105 BX 106 BX 107 BX 108 BX 109 BX 110 BX 112 BX 113 BX 114 BX 115 BX 116 BX 117 BX 118 BX 119 BX 120 BX 122 BX 124 BX 126 BX 128 BX 130 BX 132 BX 134 BX 136 BX 138 BX 140 BX 142 BX 143 BX 144 BX 146 BX 148 BX 150 BX 152 BX 154 BX 156 BX 158 BX 161 BX 162 BX 163 BX 165 Inside Length (mm) 2388 2413 2438 2451 2464 2500 2520 2540 2565 2591 2615 2650 2667 2700 2725 2750 2775 2800 2845 2870 2900 2920 2950 2965 3000 3025 3050 3100 3150 3200 3250 3302 3350 3400 3450 3500 3550 3600 3630 3658 3700 3750 3810 3860 3910 3960 4000 4100 4115 4140 4200 Datum/Pitch Length (mm) 2431 2456 2481 2494 2507 2532 2558 2583 2608 2634 2659 2685 2710 2735 2761 2786 2812 2837 2888 2913 2939 2964 2989 3015 3040 3066 3091 3142 3193 3243 3294 3345 3396 3447 3497 3548 3599 3650 3675 3701 3751 3802 3853 3904 3955 4005 4056 4132 4158 4183 4234 CLASSICAL SECTION : CX PIX ‘X’ tra : Cut Edge V-Belts Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215 Features : • Oil resistant • Temperature range : -300C to +900C • Maximum belt linear speed : 50 m/sec • Available in Raw Edge Plain/Cogged Const. • ATEX certified FRAS belts are available Belt Length Factor (mm) 22 mm Lp to La 32 14 mm Section CX Li to Lp 56 Li to La 88 CX / 22x14 CX / 22x14 Belt Reference Inside Length (mm) Datum/Pitch Length (mm) Belt Reference Inside Length (mm) Datum/Pitch Length (mm) CX 32 CX 32.5 CX 33 CX 33.5 CX 34 CX 34.5 CX 35 CX 35.5 CX 36 CX 36.5 CX 37 CX 37.5 CX 38 CX 38.5 CX 39 CX 39.5 CX 40 CX 40.5 CX 41 CX 41.5 CX 42 CX 42.5 CX 43 CX 43.5 CX 44 CX 44.5 CX 45 CX 45.5 CX 46 CX 46.5 CX 47 CX 47.5 CX 48 CX 48.5 CX 49 CX 49.5 CX 50 CX 50.5 CX 51 CX 51.5 CX 52 CX 52.5 CX 53 CX 53.5 CX 54 CX 55 CX 56 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 1090 1105 1120 1130 1143 1155 1168 1180 1190 1200 1220 1230 1250 1260 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 869 882 894 907 920 932 945 958 970 983 996 1009 1021 1034 1047 1059 1072 1085 1097 1110 1123 1136 1148 1161 1174 1186 1199 1212 1224 1237 1250 1263 1275 1288 1301 1313 1326 1339 1351 1364 1377 1390 1402 1415 1428 1453 1478 CX 57 CX 58 CX 59 CX 60 CX 61 CX 62 CX 63 CX 64 CX 65 CX 66 CX 67 CX 68 CX 69 CX 70 CX 71 CX 72 CX 73 CX 74 CX 75 CX 76 CX 77 CX 78 CX 79 CX 80 CX 81 CX 82 CX 82.5 CX 83 CX 83.5 CX 84 CX 84.5 CX 85 CX 86 CX 86.5 CX 87 CX 88 CX 89 CX 90 CX 91 CX 92 CX 93 CX 94 CX 95 CX 96 CX 97 CX 98 CX 99 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2095 2100 2120 2134 2150 2160 2184 2200 2210 2240 2260 2286 2311 2337 2360 2388 2413 2438 2464 2500 2520 1504 1529 1555 1580 1605 1631 1656 1682 1707 1732 1758 1783 1809 1834 1859 1885 1910 1936 1961 1986 2012 2037 2063 2088 2113 2139 2152 2164 2177 2190 2202 2215 2240 2253 2266 2291 2317 2342 2367 2393 2418 2444 2469 2494 2520 2545 2571 Minimum Order Qty. (No. of V-Belts) 20 II 2GD c IIB X (Test report no. IB-03-4-934) CX / 22x14 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 17 Weight per metre (Kgs) 0.306 Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) 36 160 dp (mm) 22 14 Nominal Length (Inches) : Li ‘PIX’ FRAS belts conforms to : CX Section Manufacturing Range 24 - 200 inches Belt Reference CX 100 CX 101 CX 102 CX 103 CX 104 CX 105 CX 106 CX 107 CX 108 CX 109 CX 110 CX 112 CX 113 CX 114 CX 115 CX 116 CX 117 CX 118 CX 119 CX 120 CX 122 CX 124 CX 126 CX 128 CX 130 CX 132 CX 134 CX 136 CX 138 CX 140 CX 142 CX 143 CX 144 CX 146 CX 148 CX 150 CX 152 CX 154 CX 156 CX 158 CX 161 CX 162 CX 163 CX 165 Inside Length (mm) Datum/Pitch Length (mm) 2540 2565 2591 2615 2650 2667 2700 2725 2750 2775 2800 2845 2870 2900 2920 2950 2965 3000 3025 3050 3100 3150 3200 3250 3302 3350 3400 3450 3500 3550 3600 3630 3658 3700 3750 3810 3860 3910 3960 4000 4100 4115 4140 4200 2596 2621 2647 2672 2698 2723 2748 2774 2799 2825 2850 2901 2926 2952 2977 3002 3028 3053 3079 3104 3155 3206 3256 3307 3358 3409 3460 3510 3561 3612 3663 3688 3714 3764 3815 3866 3917 3968 4018 4069 4145 4171 4196 4247 WEDGE SECTION : XPZ PIX ‘X’ tra : Cut Edge V-Belts Standard : BS 3790 Features : • Oil resistant • Temperature range : -300C to +900C • Maximum belt linear speed : 50 m/sec • Available in Raw Edge Plain/Cogged Const. • ATEX certified FRAS belts are available XPZ / 10x8 Belt Reference XPZ 612 XPZ 630 XPZ 637 XPZ 662 XPZ 670 XPZ 687 XPZ 710 XPZ 722 XPZ 737 XPZ 750 XPZ 762 XPZ 772 XPZ 775 XPZ 780 XPZ 787 XPZ 800 XPZ 807 XPZ 812 XPZ 825 XPZ 837 XPZ 850 XPZ 860 XPZ 862 XPZ 875 XPZ 887 XPZ 892 XPZ 900 XPZ 912 XPZ 917 XPZ 925 XPZ 937 XPZ 940 XPZ 950 XPZ 962 XPZ 987 XPZ 1000 XPZ 1010 XPZ 1012 XPZ 1024 XPZ 1030 XPZ 1034 Belt Length Factor (mm) Lp to La 13 10 mm Li to Lp 37 612 630 637 662 670 687 710 722 737 750 762 772 775 780 787 800 807 812 825 837 850 860 862 875 887 892 900 912 917 925 937 940 950 962 987 1000 1010 1012 1024 1030 1034 Manufacturing Range 600 - 5080 mm Weight per metre (Kgs) 0.069 Dimensions Angle Rec. Min Minimum Order Qty. (No. of V-Belts) Topwidth(mm) Thickness(mm) Degree Pulley Dia. 36 40 10 8 54 dp (mm) XPZ Nominal Length : Pitch length Lp in mm ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) Section 8 mm XPZ Section XPZ / 10x8 Datum/Pitch Length (mm) Li to La 50 XPZ / 10x8 Datum/Pitch Length (mm) Belt Reference XPZ 1037 XPZ 1060 XPZ 1077 XPZ 1080 XPZ 1087 XPZ 1112 XPZ 1120 XPZ 1137 XPZ 1140 XPZ 1150 XPZ 1162 XPZ 1180 XPZ 1187 XPZ 1200 XPZ 1202 XPZ 1212 XPZ 1217 XPZ 1220 XPZ 1225 XPZ 1237 XPZ 1250 XPZ 1262 XPZ 1270 XPZ 1280 XPZ 1287 XPZ 1300 XPZ 1312 XPZ 1320 XPZ 1337 XPZ 1340 XPZ 1347 XPZ 1362 XPZ 1387 XPZ 1400 XPZ 1412 XPZ 1420 XPZ 1437 XPZ 1450 XPZ 1462 XPZ 1470 XPZ 1487 1037 1060 1077 1080 1087 1112 1120 1137 1140 1150 1162 1180 1187 1200 1202 1212 1217 1220 1225 1237 1250 1262 1270 1280 1287 1300 1312 1320 1337 1340 1347 1362 1387 1400 1412 1420 1437 1450 1462 1470 1487 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 18 Belt Reference XPZ 1500 XPZ 1512 XPZ 1520 XPZ 1537 XPZ 1548 XPZ 1550 XPZ 1557 XPZ 1562 XPZ 1587 XPZ 1600 XPZ 1612 XPZ 1637 XPZ 1662 XPZ 1700 XPZ 1750 XPZ 1762 XPZ 1800 XPZ 1850 XPZ 1900 XPZ 1950 XPZ 2000 XPZ 2030 XPZ 2120 XPZ 2160 XPZ 2240 XPZ 2280 XPZ 2360 XPZ 2410 XPZ 2500 XPZ 2540 XPZ 2650 XPZ 2690 XPZ 2800 XPZ 2840 XPZ 3000 XPZ 3150 XPZ 3170 XPZ 3350 XPZ 3550 Datum/Pitch Length (mm) 1500 1512 1520 1537 1548 1550 1557 1562 1587 1600 1612 1637 1662 1700 1750 1762 1800 1850 1900 1950 2000 2030 2120 2160 2240 2280 2360 2410 2500 2540 2650 2690 2800 2840 3000 3150 3170 3350 3550 WEDGE SECTION : XPA PIX ‘X’ tra : Cut Edge V-Belts Standard : BS 3790 Features : • Oil resistant • Temperature range : -300C to +900C • Maximum belt linear speed : 50 m/sec • Available in Raw Edge Plain/Cogged Const. • ATEX certified FRAS belts are available XPA / 13x10 Belt Reference Datum/Pitch Length (mm) XPA 630 XPA 690 XPA 732 XPA 750 XPA 757 XPA 775 XPA 782 XPA 800 XPA 807 XPA 832 XPA 850 XPA 857 XPA 875 XPA 882 XPA 900 XPA 907 XPA 925 XPA 932 XPA 950 XPA 957 XPA 975 XPA 982 XPA 1000 XPA 1007 XPA 1030 XPA 1060 XPA 1070 XPA 1082 XPA 1090 XPA 1107 XPA 1120 XPA 1132 XPA 1142 XPA 1150 630 690 732 750 757 775 782 800 807 832 850 857 875 882 900 907 925 932 950 957 975 982 1000 1007 1030 1060 1070 1082 1090 1107 1120 1132 1142 1150 Belt Length Factor (mm) 13 mm Lp to La 18 10 mm XPA Section Li to Lp 45 Li to La 63 Manufacturing Range 600 - 5080 mm Weight per metre (Kgs) 0.112 Dimensions Angle Rec. Min Minimum Order Qty. (No. of V-Belts) Topwidth(mm) Thickness(mm) Degree Pulley Dia. 36 13 10 80 dp (mm) XPA 30 Nominal Length : Pitch length Lp in mm ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) Section XPA / 13x10 XPA / 13x10 Belt Reference Datum/Pitch Length (mm) Belt Reference Datum/Pitch Length (mm) XPA 1157 XPA 1172 XPA 1180 XPA 1207 XPA 1220 XPA 1232 XPA 1250 XPA 1257 XPA 1272 XPA 1282 XPA 1307 XPA 1320 XPA 1332 XPA 1357 XPA 1382 XPA 1400 XPA 1432 XPA 1450 XPA 1457 XPA 1482 XPA 1490 XPA 1500 XPA 1507 XPA 1522 XPA 1532 XPA 1550 XPA 1557 XPA 1582 XPA 1600 XPA 1607 XPA 1632 XPA 1657 XPA 1682 XPA 1700 1157 1172 1180 1207 1220 1232 1250 1257 1272 1282 1307 1320 1332 1357 1382 1400 1432 1450 1457 1482 1490 1500 1507 1522 1532 1550 1557 1582 1600 1607 1632 1657 1682 1700 XPA 1732 XPA 1750 XPA 1757 XPA 1782 XPA 1800 XPA 1850 XPA 1857 XPA 1882 XPA 1900 XPA 1932 XPA 1950 XPA 1957 XPA 1982 XPA 2000 XPA 2032 XPA 2057 XPA 2060 XPA 2082 XPA 2120 XPA 2180 XPA 2240 XPA 2282 XPA 2360 XPA 2432 XPA 2500 XPA 2650 XPA 2682 XPA 2800 XPA 2840 XPA 2882 XPA 3000 XPA 3150 XPA 3350 XPA 3550 1732 1750 1757 1782 1800 1850 1857 1882 1900 1932 1950 1957 1982 2000 2032 2057 2060 2082 2120 2180 2240 2282 2360 2432 2500 2650 2682 2800 2840 2882 3000 3150 3350 3550 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 19 WEDGE SECTION : XPB PIX ‘X’ tra : Cut Edge V-Belts Standard : BS 3790 Features : • Oil resistant • Temperature range : -300C to +900C • Maximum belt linear speed : 50 m/sec • Available in Raw Edge Plain/Cogged Const. • ATEX certified FRAS belts are available XPB / 17x14 17 mm Belt Length Factor (mm) Lp to La 28 14 mm Section XPB Li to Lp 60 Li to La 88 Manufacturing Range 600 - 5080 mm Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) 36 128 dp (mm) 17 14 Weight per metre (Kgs) 0.194 Minimum Order Qty. (No. of V-Belts) 25 Nominal Length : Pitch length Lp in mm ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) XPB Section XPB / 17x14 XPB / 17x14 Belt Reference Datum/Pitch Length (mm) Belt Reference Datum/Pitch Length (mm) XPB 1000 XPB 1060 XPB 1120 XPB 1180 XPB 1250 XPB 1260 XPB 1320 XPB 1340 XPB 1400 XPB 1410 XPB 1450 XPB 1480 XPB 1500 XPB 1510 XPB 1525 XPB 1590 1000 1060 1120 1180 1250 1260 1320 1340 1400 1410 1450 1480 1500 1510 1525 1590 XPB 1600 XPB 1620 XPB 1650 XPB 1690 XPB 1700 XPB 1750 XPB 1800 XPB 1850 XPB 1900 XPB 2000 XPB 2020 XPB 2120 XPB 2150 XPB 2180 XPB 2240 XPB 2280 1600 1620 1650 1690 1700 1750 1800 1850 1900 2000 2020 2120 2150 2180 2240 2280 Belt Reference Datum/Pitch Length (mm) XPB 2360 XPB 2410 XPB 2500 XPB 2530 XPB 2650 XPB 2680 XPB 2800 XPB 2840 XPB 2990 XPB 3000 XPB 3150 XPB 3170 XPB 3340 XPB 3350 XPB 3550 2360 2410 2500 2530 2650 2680 2800 2840 2990 3000 3150 3170 3340 3350 3550 WEDGE SECTION : XPC PIX ‘X’ tra : Cut Edge V-Belts Standard : BS 3790 Features : • Oil resistant • Temperature range : -300C to +900C • Maximum belt linear speed : 50 m/sec • Available in Raw Edge Plain/Cogged Const. • ATEX certified FRAS belts are available XPC / 22x18 22 mm Belt Length Factor (mm) Lp to La 30 18 mm Section XPC Li to Lp 83 Li to La 113 Manufacturing Range 600 - 5080 mm Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 36 180 dp (mm) 18 22 Weight per metre (Kgs) 0.332 Minimum Order Qty. (No. of V-Belts) 20 Nominal Length : Pitch length Lp in mm ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) XPC Section XPC / 22x18 Belt Reference Datum/Pitch Length (mm) Belt Reference Datum/Pitch Length (mm) XPC 2000 XPC 2120 XPC 2240 XPC 2360 2000 2120 2240 2360 XPC 2500 XPC 2650 XPC 2800 XPC 3000 2500 2650 2800 3000 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 20 XPC / 22x18 Belt Reference Datum/Pitch Length (mm) XPC 3150 XPC 3350 XPC 3550 3150 3350 3550 HIGH CAPACITY NARROW V-BELTS : 3VX PIX ‘X’ tra : Cut Edge V-Belts Standard : RMA IP 22, DIN 2215 Features : • Oil resistant • Temperature range : -300C to +900C • Maximum belt linear speed : 50 m/sec • Available in Raw Edge Plain/Cogged Const. Belt Reference 3VX 250 3VX 260 3VX 265 3VX 280 3VX 300 3VX 315 3VX 335 3VX 350 3VX 355 3VX 370 3VX 375 3VX 400 3VX 425 3VX 450 635 660 673 711 762 800 851 889 902 940 953 1016 1080 1143 Lp to La 13 8 mm 3VX Section 3VX / 9.7x8 Outside Length (mm) Belt Length Factor (mm) 9.7 mm Li to Lp 37 Li to La 50 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 9.7 36 8 3VX 55 de (mm) Nominal Length : Belt no /10 = outside length in inches Section 3VX / 9.7x8 3VX 475 3VX 500 3VX 520 3VX 530 3VX 560 3VX 600 3VX 617 3VX 630 3VX 670 3VX 710 3VX 750 3VX 800 3VX 850 3VX 900 Weight per metre (Kgs) 0.069 Minimum Order Qty. (No. of V-Belts) 40 3VX / 9.7x8 Outside Length (mm) Belt Reference Manufacturing Range 24 - 200 inches 1207 1270 1321 1346 1422 1524 1567 1600 1702 1803 1905 2032 2159 2286 Belt Reference Outside Length (mm) 3VX 950 3VX 960 3VX 1000 3VX 1060 3VX 1120 3VX 1180 3VX 1250 3VX 1320 3VX 1400 3VX 1425 3VX 1450 3VX 1500 2413 2438 2540 2692 2845 2997 3175 3353 3556 3620 3683 3810 HIGH CAPACITY NARROW V-BELTS : 5VX PIX ‘X’ tra : Cut Edge V-Belts Standard : RMA IP 22, DIN 2215 Features : • Oil resistant • Temperature range : -300C to +900C • Maximum belt linear speed : 50 m/sec • Available in Raw Edge Plain/Cogged Const. 5VX / 16x14 Belt Reference 5VX 500 5VX 530 5VX 560 5VX 600 5VX 630 5VX 670 5VX 710 5VX 750 16 mm Belt Length Factor (mm) Lp to La 25 14 mm 5VX Section Li to Lp 60 Manufacturing Range 24 - 200 inches Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) 36 112 de (mm) 5VX 16 14 Nominal Length : Belt no /10 = Outside length in inches Section 5VX / 16x14 Outside Length (mm) Belt Reference Outside Length (mm) 1270 1346 1422 1524 1600 1702 1803 1905 5VX 800 5VX 850 5VX 900 5VX 950 5VX 1000 5VX 1060 5VX 1120 5VX 1180 2032 2159 2286 2413 2540 2692 2845 2997 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 21 Li to La 85 Weight per metre (Kgs) 0.186 Minimum Order Qty. (No. of V-Belts) 25 5VX / 16x14 Belt Reference Outside Length (mm) 5VX 1250 5VX 1320 5VX 1400 5VX 1500 5VX 1600 5VX 1650 3175 3353 3556 3810 4064 4191 RIBBED / POLY V-BELTS : PH PIX ‘X’ Power Standard : RMA IP 26 Features : • Oil resistant • Temperature range : -300C to +900C • Can be used for speed ratios up to 1:30 • Maximum belt speed up to 60 m/sec • ATEX certified FRAS belts are available • No of Ribs per Sleeve : 280 H / PH Belt Reference PH PH PH PH PH PH PH PH PH PH PH PH 22 27.5 28.9 30 32 33.8 34 34.9 36 37.5 38 38.4 Max. Rec. Min Minimum Order Qty. Dimensions Belt Speed Pulley Dia. (No. of Sleeves) RibPitch(mm) Thickness(mm) m/sec 13 de (mm) 1 PH 2.9 1.6 60 Nominal Length : Effective length Le ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) PH Section Belt Reference PH PH PH PH PH PH PH PH PH PH PH PH Weight per metre (Kgs) 0.006 Section 2.9 mm H / PH Effective Length (inches) 559 698 735 762 813 858 864 886 914 955 965 975 Manufacturing Range 280 - 5080 mm 1.6 mm H / PH Effective Length (inches) 990 1016 1080 1092 1096 1168 1194 1200 1222 1230 1244 1262 Belt Reference 39 40 42.5 43 43.1 46 47 47.2 48.1 48.4 49 49.7 PH PH PH PH PH PH PH PH PH PH PH PH H / PH Effective Length (inches) 50 50.6 50.8 51.2 51.5 51.8 52 52.5 54 55 56.7 58.1 1270 1285 1290 1301 1309 1316 1321 1333 1371 1397 1439 1475 Belt Reference PH PH PH PH PH PH PH PH PH Effective Length (inches) 1600 1854 1895 1915 1930 1956 1992 2083 2155 63 73 74.6 75.4 76 77 78.4 82 84.8 RIBBED / POLY V-BELTS : PJ PIX ‘X’ Power Standard : RMA IP 26 Features : • Oil resistant • Temperature range : -300C to +900C • Can be used for speed ratios up to 1:30 • Maximum belt speed up to 60 m/sec • ATEX certified FRAS belts are available • No of Ribs per Sleeve : 200 J / PJ Belt Reference PJ 280 PJ 330 PJ 356 PJ 362 PJ 381 PJ 406 PJ 414 PJ 432 PJ 457 PJ 483 PJ 508 PJ 559 PJ 584 PJ 610 PJ 640 PJ 660 PJ 711 PJ 723 PJ 762 PJ 813 PJ 836 PJ 838 PJ 864 PJ 889 Manufacturing Range 280 - 5080 mm 2.34 mm Max. Dimensions Rec. Min Minimum Order Qty. Belt Speed Pulley Dia. (No. of Sleeves) m/sec RibPitch(mm) Thickness(mm) PJ 60 2.34 3.8 20 de (mm) 1 Nominal Length : Effective length Le ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) Section 3.8 mm PJ Section J / PJ Effective Length (inches) 11.0 13.0 14.0 14.3 15.0 16.0 16.3 17.0 18.0 19.0 20.0 22.0 23.0 24.0 25.2 26.0 28.0 28.5 30.0 32.0 32.9 33.0 34.0 35.0 Weight per metre (Kgs) 0.011 J / PJ Belt Reference Effective Length (inches) PJ 914 PJ 955 PJ 965 PJ 1016 PJ 1031 PJ 1054 PJ 1065 PJ 1092 PJ 1105 PJ 1110 PJ 1116 PJ 1123 PJ 1130 PJ 1143 PJ 1150 PJ 1168 PJ 1194 PJ 1200 PJ 1219 PJ 1222 PJ 1244 PJ 1245 PJ 1254 PJ 1262 36.0 37.6 38.0 40.0 40.6 41.5 41.9 43.0 43.5 43.7 43.9 44.2 44.5 45.0 45.3 46.0 47.0 47.2 48.0 48.1 49.0 49.0 49.4 49.7 Belt Reference Belt Reference Effective Length (inches) PJ 1270 PJ 1280 PJ 1285 PJ 1301 PJ 1309 PJ 1316 PJ 1321 PJ 1333 PJ 1355 PJ 1358 PJ 1371 PJ 1372 PJ 1397 PJ 1428 PJ 1435 PJ 1439 PJ 1473 PJ 1475 PJ 1549 PJ 1580 PJ 1600 PJ 1651 PJ 1663 PJ 1702 50.0 50.4 50.6 51.2 51.5 51.8 52.0 52.5 53.3 53.5 54.0 54.0 55.0 56.2 56.5 56.7 58.0 58.1 61.0 62.2 63.0 65.0 65.5 67.0 PJ 1752 PJ 1753 PJ 1778 PJ 1780 PJ 1795 PJ 1854 PJ 1880 PJ 1895 PJ 1905 PJ 1910 PJ 1915 PJ 1920 PJ 1930 PJ 1956 PJ 1965 PJ 1981 PJ 1992 PJ 2083 PJ 2100 PJ 2155 PJ 2210 PJ 2337 PJ 2489 PJ 2500 69.0 69.0 70.0 70.1 70.7 73.0 74.0 74.6 75.0 75.2 75.4 75.6 76.0 77.0 77.4 78.0 78.4 82.0 82.7 84.8 87.0 92.0 98.0 98.4 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 22 J / PJ Effective Length (inches) RIBBED / POLY V-BELTS : PK PIX ‘X’ Power Standard : RMA IP 26 Features : • Oil resistant • Temperature range : -300C to +900C • Can be used for speed ratios up to 1:30 • Maximum belt speed up to 55 m/sec • ATEX certified FRAS belts are available • No of Ribs per Sleeve : 125 K / PK Belt Reference PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK 559 605 625 630 648 698 725 735 775 780 790 795 800 805 812 825 830 835 841 845 858 865 870 875 886 890 Manufacturing Range 280 - 5080 mm 3.56 mm Max. Dimensions Rec. Min Minimum Order Qty. Belt Speed Pulley Dia. (No. of Sleeves) m/sec RibPitch(mm) Thickness(mm) 55 3.56 5.8 40 de (mm) 1 PK Nominal Length : Effective length Le ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) Section 5.8 mm PK Section K / PK Effective Length (inches) 22 23.8 24.6 24.8 25.5 27.5 28.5 28.9 30.5 30.7 31.1 31.3 31.5 31.7 32 32.5 32.7 32.9 33.1 33.3 33.8 34 34.3 34.5 34.9 35 Belt Reference PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK Weight per metre (Kgs) 0.018 905 913 920 925 930 935 940 945 954 962 970 975 985 991 995 1000 1010 1015 1020 1065 1080 1090 1100 1125 1150 1165 K / PK Effective Length (inches) Belt Reference PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK 35.6 36 36.2 36.4 36.6 36.8 37 37.2 37.6 37.8 38.2 38.4 38.8 39 39.2 39.4 39.8 40 40.2 41.9 42.5 43 43.3 44.3 45.3 45.9 1180 1190 1200 1214 1222 1230 1245 1262 1270 1285 1301 1309 1321 1330 1345 1371 1397 1439 1450 1460 1475 1520 1600 1610 1655 1854 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 23 K / PK Effective Length (inches) 46.5 46.8 47.2 47.8 48.1 48.4 49 49.7 50 50.6 51.2 51.5 52 52.4 53 54 55 56.7 57.1 57.5 58.1 59.8 63 63.4 65.2 73 Belt Reference PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK PK 1895 1930 1956 1980 1992 2030 2050 2145 2155 2170 2235 2362 2461 2515 2743 2845 2895 2921 2997 3124 3327 3492 3696 4051 4191 Effective Length (inches) 74.6 76 77 78 78.4 79.9 80.7 84.4 84.8 85.4 88 93 96.9 99 108 112 114 115 118 123 131 137.5 145.5 159.5 165 RIBBED / POLY V-BELTS : PL PIX ‘X’ Power Standard : RMA IP 26 Features : • Oil resistant • Temperature range : -300C to +900C • Can be used for speed ratios up to 1:30 • Maximum belt speed up to 50 m/sec • ATEX certified FRAS belts are available • No of Ribs per Sleeve : 95 L /PL Belt Reference PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL Manufacturing Range 280 - 5080 mm 4.7 mm Max. Dimensions Rec. Min Minimum Order Qty. Belt Speed Pulley Dia. (No. of Sleeves) m/sec RibPitch(mm) Thickness(mm) PL 50 7.6 75 de (mm) 4.7 1 Nominal Length : Effective length Le ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) Section 7.6 mm PL Section L /PL Effective Length (inches) 954 991 945 955 960 970 975 986 991 996 1001 1011 1016 1021 1041 1064 1075 1080 1092 1100 1125 1149 1151 1166 1168 1181 1189 1194 1199 1214 37.6 39.0 37.2 37.6 37.8 38.2 38.4 38.8 39.0 39.2 39.4 39.8 40.0 40.2 41.0 41.9 42.3 42.5 43.0 43.3 44.3 45.2 45.3 45.9 46.0 46.5 46.8 47.0 47.2 47.8 Belt Reference PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL Weight per metre (Kgs) 0.038 L /PL Effective Length (inches) 1219 1222 1229 1245 1262 1270 1285 1295 1300 1308 1321 1333 1334 1346 1371 1397 1422 1435 1440 1450 1460 1462 1473 1476 1499 1519 1562 1600 1613 1651 Belt Reference PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL 48.0 48.1 48.4 49.0 49.7 50.0 50.6 51.0 51.2 51.5 52.0 52.5 52.5 53.0 54.0 55.0 56.0 56.5 56.7 57.1 57.5 57.6 58.0 58.1 59.0 59.8 61.5 63.0 63.5 65.0 L /PL Effective Length (inches) 1656 1664 1715 1727 1764 1765 1803 1841 1842 1854 1895 1930 1943 1956 1981 1991 2019 2020 2029 2050 2070 2096 2134 2144 2154 2169 2197 2235 2324 2362 65.2 65.5 67.5 68.0 69.4 69.5 71.0 72.5 72.5 73.0 74.6 76.0 76.5 77.0 78.0 78.4 79.5 79.5 79.9 80.7 81.5 82.5 84.0 84.4 84.8 85.4 86.5 88.0 91.5 93.0 Belt Reference PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL PL Effective Length (inches) 96.9 97.5 99.0 101.0 106.5 108.0 112.0 113.8 114.0 115.0 118.0 121.5 123.0 129.4 129.5 131.0 137.5 145.5 159.5 165.0 167.3 176.0 182.0 198.0 200.0 212.0 240.0 2461 2476 2515 2565 2705 2743 2845 2890 2895 2921 2997 3086 3124 3288 3289 3327 3492 3696 4051 4191 4250 4470 4622 5029 5080 5385 6096 RIBBED / POLY V-BELTS : PM PIX ‘X’ Power Standard : RMA IP 26 Features : • Oil resistant • Temperature range : -300C to +900C • Can be used for speed ratios up to 1:30 • Maximum belt speed up to 40 m/sec • ATEX certified FRAS belts are available • No of Ribs per Sleeve : 45 M / PM Belt Reference PM PM PM PM PM PM PM 2286 2362 2388 2461 2515 2693 2743 Manufacturing Range 280 - 5080 mm 9.4 mm 13.3 mm PM Section Max. Dimensions Rec. Min Minimum Order Qty. Belt Speed Pulley Dia. (No. of Sleeves) m/sec RibPitch(mm) Thickness(mm) 9.4 40 13.3 180 de (mm) 1 PM Nominal Length : Effective length Le ‘PIX’ FRAS belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934) Section M / PM Effective Length (inches) 90 93 94 96.9 99 106 108 Belt Reference PM PM PM PM PM PM PM 2832 2845 2896 2921 2997 3010 3124 Weight per metre (Kgs) 0.151 M / PM Effective Length (inches) Belt Reference 111.5 112 114 115 118 118.5 123 PM PM PM PM PM PM PM 3327 3493 3531 3696 3734 4051 4089 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 24 Effective Length (inches) 131 137.5 139 145.5 147 159.5 161 M / PM Belt Reference Effective Length (inches) PM PM PM PM PM PM 165 176 182 183 198 200 4191 4470 4623 4648 5029 5080 VARIABLE SPEED BELTS PIX ‘X’ tra : Cut Edge V-Belts Standard (REC Belts) : RMA IP 25, ISO 3410, BS 3733 Features : • Oil resistant • Antistatic • Available also in Polyester/Aramid (Kevlar) cord construction • Fabric top surface : To impart superior flexibility • Fibre filled compound : To impart extra rigidity in transverse direction • Tension Cord : Ability to transmit extremely high forces • Special Fabric at Bottom : To get extra flexibility on small diameter pulleys • Cushion Rubber Compound : To ensure best possible bond • Base Compound : For high wear resistance and good support to tension cord • Variable Speed Belts in Wrapped Construction also available Belt Reference Datum/Pitch Length (mm) VS 13 X 5 VS 13 X 5 VS 13 X 5 VS 13 X 5 VS 13 X 5 VS 13 X 5 VS 13 X 5 VS 13 X 5 VS 13 X 5 468 500 600 700 750 850 900 1000 1180 VS 17 X 5 VS 17 X 5 VS 17 X 5 VS 17 X 5 VS 17 X 5 VS 17 X 5 VS 17 X 5 VS 17 X 5 VS 17 X 5 426 476 536 570 606 686 776 875 976 VS 20 X 10 VS 20 X 10 VS 20 X 10 VS 20 X 10 VS 20 X 10 VS 20 X 10 600 700 800 900 1000 1500 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 VS 21 X 6 530 550 600 610 675 700 750 770 800 850 870 900 970 1120 1180 1220 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 485 525 565 650 700 750 800 830 850 Belt Reference Datum/Pitch Length (mm) VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 VS 22 X 8 880 900 950 1000 1060 1150 1185 1250 1320 1400 1500 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 VS 26 X 8 525 630 655 672 680 710 750 762 780 800 850 862 900 950 962 1000 1082 1212 1562 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 VS 28 X 8 600 650 670 700 750 800 850 900 950 1000 1060 1120 1180 1250 1320 1400 1450 1500 VS 30 X 10 VS 30 X 10 650 665 Belt Reference y Manufacturing Range (Li) 600 - 5000 mm Datum/Pitch Length (mm) VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 VS 30 X 10 700 773 800 850 875 900 925 950 1000 1015 1035 1050 1100 1120 1185 1200 1320 1340 1500 1600 1700 1750 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 VS 32 X 10 750 790 820 850 900 950 1000 1073 1120 1180 1200 1250 1353 1400 1600 VS 35 X 12 VS 35 X 12 VS 35 X 12 VS 35 X 12 VS 35 X 12 VS 35 X 12 VS 35 X 12 VS 35 X 12 VS 35 X 12 VS 35 X 12 VS 35 X 12 800 850 900 950 1000 1050 1100 1180 1250 1400 1500 VS 37 X 10 VS 37 X 10 660 800 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 25 x Dimensions Topwidth(mm) Thickness(mm) (x) (y) 23 8 28 8 32 10 38 10 46 13 50 14 64 18 70 18 76 19 90 22 Belt Reference Datum/Pitch Length (mm) VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 VS 37 X 10 850 900 920 950 1000 1020 1060 1120 1180 1250 1320 1400 1500 1600 1700 1800 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 VS 41 X 13 900 925 950 970 1000 1040 1060 1120 1180 1190 1250 1340 1400 1440 1500 1600 1740 1940 2180 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 VS 47 X 13 960 1000 1060 1120 1180 1250 1320 1400 1500 1600 1700 1740 1790 1800 BANDED BELTS : HA Wrapped V-Belts Standard : ISO 5291 13 mm Li (mm) La (mm) HA 47 HA 51 HA 56 HA 57 HA 59 HA 64 HA 67 1194 1295 1422 1448 1499 1626 1702 1244 1345 1472 1498 1549 1676 1752 Section HA Weight per metre (Kgs) 0.175 Dimensions TopWidth(mm) Thickness(mm) 13 10 HA / 13x10 La (inches) 49 53 58 59 61 66 69 Angle Degree 40 Rec. Min Minimum Order Qty. Pulley Dia. (No. of Ribs) 80 mm (de) Refer Page no. 62 Section : HA HA / 13x10 Belt Ref. Manufacturing Range 838 - 7112 mm (Li) 10 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Recommended number of Ribs = 5 (Max) HA / 13x10 Belt Ref. Li (mm) La (mm) La (inches) Belt Ref. Li (mm) La (mm) La (inches) HA 71 HA 75 HA 79 HA 98 HA 100 HA 104 HA 112 1803 1905 2007 2489 2540 2642 2845 1853 1955 2057 2539 2590 2692 2895 73 77 81 100 102 106 114 HA 120 HA 128 HA 144 HA 157 HA 167 HA 187 3048 3251 3658 3988 4242 4750 3098 3301 3708 4038 4292 4800 122 130 146 159 169 189 • Banded belts in Moulded Raw Edge Cogged construction are available on request. BANDED BELTS : HB Wrapped V-Belts Standard : ISO 5291 17 mm 13 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Recommended number of Ribs = 5 (Max) Manufacturing Range 1041 - 9525 mm (Li) Section HB Weight per metre (Kgs) 0.272 Dimensions TopWidth(mm) Thickness(mm) 13 17 Angle Degree 40 Rec. Min Minimum Order Qty. Pulley Dia. (No. of Ribs) 130 mm (de) Refer Page no. 62 Section : HB HB / 17x13 HB / 17x13 Belt Ref. Li (mm) La (mm) La (inches) Belt Ref. Li (mm) HB 47 HB 51 HB 55 HB 59 HB 61 HB 63 HB 64 HB 67 HB 71 HB 73 HB 75 HB 79 1194 1295 1397 1499 1549 1600 1626 1702 1803 1854 1905 2007 1263 1364 1466 1568 1618 1669 1695 1771 1872 1923 1974 2076 50 54 58 62 64 66 67 70 74 76 78 82 HB 83 HB 88 HB 91 HB 94.5 HB 98 HB 102 HB 106 HB 112 HB 118 HB 120 HB 128 HB 132 2108 2235 2311 2400 2489 2591 2692 2845 2997 3048 3251 3353 HB / 17x13 La (mm) La (inches) Belt Ref. Li (mm) La (mm) La (inches) 2177 2304 2380 2469 2558 2660 2761 2914 3066 3117 3320 3422 86 91 94 97 101 105 109 115 121 123 131 135 HB 140 HB 146 HB 148 HB 158 HB 167 HB 177 HB 187 HB 197 HB 208 HB 220 3556 3708 3759 4013 4242 4496 4750 5004 5283 5588 3625 3777 3828 4082 4311 4565 4819 5073 5352 5657 143 149 151 161 170 180 190 200 211 223 • Banded belts in Moulded Raw Edge Cogged construction are available on request. • Prices on request • Non standard stock items are available on request • Std. Designation for Banded belts : Refer page no. 61 26 BANDED BELTS : HC Wrapped V-Belts Standard : ISO 5291 22 mm 16 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Recommended number of Ribs = 5 (Max) Manufacturing Range 1168 -16713 mm (Li) Section HC Weight per metre (Kgs) 0.431 Dimensions TopWidth(mm) Thickness(mm) 16 22 Angle Degree 40 Rec. Min Minimum Order Qty. Pulley Dia. (No. of Ribs) 210 mm (de) Refer Page no. 62 Section : HC HC / 22x16 HC / 22x16 HC / 22x16 Belt Ref. Li (mm) La (mm) La (inches) Belt Ref. Li (mm) La (mm) La (inches) Belt Ref. Li (mm) La (mm) La (inches) HC 90 HC 98 HC 108 HC 120 HC 128 HC 140 2286 2489 2743 3048 3251 3556 2374 2577 2831 3136 3339 3644 93 101 111 123 131 143 HC 146 HC 151 HC 167 HC 177 HC 187 HC 197 4242 4496 4750 5004 5283 5588 3796 3923 4330 4584 4838 5092 149 154 170 180 190 200 HC 208 HC 220 HC 236 HC 248 5994 6299 3708 3835 5371 5676 6082 6387 211 223 239 251 • Banded belts in Moulded Raw Edge Cogged construction are available on request. BANDED BELTS : HD Wrapped V-Belts Standard : ISO 5291 32 mm 21.5 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Recommended number of Ribs = 5 (Max) Manufacturing Range 2286 -16713 mm (Li) Section HD HD / 32x21.5 Weight per metre (Kgs) 0.835 Dimensions TopWidth(mm) Thickness(mm) 32 21.5 HD / 32x21.5 Angle Degree 40 Rec. Min Minimum Order Qty. Pulley Dia. (No. of Ribs) 370 mm (de) Refer Page no. 62 HD / 32x21.5 Belt Ref. Li (mm) La (mm) La (inches) Belt Ref. Li (mm) La (mm) La (inches) Belt Ref. Li (mm) La (mm) La (inches) HD 90 HD 110 HD 120 HD 128 HD 144 HD 158 HD 162 HD 173 2286 2794 3048 3251 3658 4013 4115 4394 2405 2913 3167 3370 3777 4132 4234 4513 95 115 125 133 149 163 167 178 HD 180 HD 195 HD 210 HD 225 HD 240 HD 255 HD 270 HD 285 4572 4953 5334 5715 6096 6477 6858 7239 4691 5072 5453 5834 6215 6596 6977 7358 185 200 215 230 245 260 275 290 HD 300 HD 315 HD 330 HD 345 HD 360 HD 390 7620 8001 8382 8763 9144 9906 7739 8120 8501 8882 9263 10025 305 320 335 350 365 395 • Banded belts in Moulded Raw Edge Cogged construction are available on request. • Prices on request • Non standard stock items are available on request • Std. Designation for Banded belts : Refer page no. 61 27 BANDED BELTS : HSPB Wrapped V-Belts Standard : BS 3790 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt speed up to 42 m/sec • Recommended number of Ribs = 5 (Max) HSPB / 17x16 17 mm Manufacturing Range 1778 - 10058 mm (Lp) 16 mm Weight per metre (Kgs) 0.275 Section Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. HSPB 40 16 160 dp(mm) 17 Minimum Order Qty. Ref. Page no. 62 Section : HSPB HSPB / 17x16 HSPB / 17x16 Belt Reference Lp (mm) Belt Reference Lp (mm) Belt Reference Lp (mm) HSPB 2000 HSPB 2120 HSPB 2240 HSPB 2360 HSPB 2500 HSPB 2650 HSPB 2800 HSPB 3000 HSPB 3150 2000 2120 2240 2360 2500 2650 2800 3000 3150 HSPB 3350 HSPB 3550 HSPB 3750 HSPB 4000 HSPB 4250 HSPB 4500 HSPB 4750 HSPB 5000 HSPB 5300 3350 3550 3750 4000 4250 4500 4750 5000 5300 HSPB 5600 HSPB 6000 HSPB 6300 HSPB 6700 HSPB 7100 HSPB 7500 HSPB 8000 5600 6000 6300 6700 7100 7500 8000 • Banded belts in Moulded Raw Edge Cogged construction are available on request. BANDED BELTS : HSPC Wrapped V-Belts Standard : BS 3790 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt speed up to 42 m/sec • Recommended number of Ribs = 5 (Max) 22 mm Manufacturing Range 2235 - 16688 mm (Lp) 20 mm Section HSPC Weight per metre (Kgs) 0.485 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 20 224 dp(mm) 22 Minimum Order Qty. Ref. Page No. 62 Section : HSPC HSPC / 22x20 HSPC / 22x20 HSPC / 22x20 Belt Reference Lp (mm) Belt Reference Lp (mm) Belt Reference Lp (mm) HSPC 3000 HSPC 3150 HSPC 3350 HSPC 3550 HSPC 3750 HSPC 4000 HSPC 4250 HSPC 4500 HSPC 4750 3000 3150 3350 3550 3750 4000 4250 4500 4750 HSPC 5000 HSPC 5300 HSPC 5600 HSPC 6000 HSPC 6300 HSPC 6700 HSPC 7100 HSPC 7500 HSPC 8000 5000 5300 5600 6000 6300 6700 7100 7500 8000 HSPC 8500 HSPC 9000 HSPC 9500 HSPC 10000 HSPC 10600 HSPC 11200 HSPC 11800 HSPC 12500 8500 9000 9500 10000 10600 11200 11800 12500 • Banded belts in Moulded Raw Edge Cogged construction are available on request. • Prices on request • Non standard stock items are available on request • Std. Designation for Banded belts : Refer page no. 61 28 BANDED BELTS : H3V Wrapped V-Belts Standard : ISO 5290 9.7 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt speed up to 42 m/sec • Recommended number of Ribs = 5 (Max) H3V / 9.7x10 Belt Reference H3V 500 H3V 530 H3V 560 H3V 600 H3V 630 9J 9J 9J 9J 9J La (mm) 1270 1346 1422 1524 1600 Manufacturing Range 711 - 4521 mm (La) 10 mm Section H3V Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 9.7 40 10 67 mm (de) Minimum Order Qty. Ref. Page no. 62 Section : H3V H3V / 9.7x10 Belt Reference H3V 670 H3V 710 H3V 750 H3V 800 H3V 850 Weight per metre (Kgs) 0.106 9J 9J 9J 9J 9J H3V / 9.7x10 La (mm) Belt Reference 1702 1803 1905 2032 2159 H3V 900 H3V 950 H3V 1000 H3V 1060 H3V 1120 H3V / 9.7x10 La (mm) 9J 9J 9J 9J 9J Belt Reference H3V 1180 H3V 1250 H3V 1320 H3V 1400 2286 2413 2540 2692 2845 9J 9J 9J 9J La (mm) 2997 3175 3353 3556 • Banded belts in Moulded Raw Edge Cogged construction are available on request. BANDED BELTS : H5V Wrapped V-Belts Standard : ISO 5290 15.8 mm 16 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt speed up to 42 m/sec • Recommended number of Ribs = 5 (Max) Manufacturing Range Weight per metre (Kgs) 1219 - 9525 mm (La) 0.258 Section H5V Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 180 mm (de) 15.8 16 Minimum Order Qty. Ref. Page no. 62 Section : H5V H5V / 15.8x16 Belt Reference H5V 500 H5V 530 H5V 560 H5V 600 H5V 630 H5V 670 H5V 710 H5V 750 H5V 800 15J 15J 15J 15J 15J 15J 15J 15J 15J La (mm) 1270 1346 1422 1524 1600 1702 1803 1905 2032 H5V / 15.8x16 Belt Reference H5V 850 H5V 900 H5V 950 H5V 1000 H5V 1060 H5V 1120 H5V 1180 H5V 1250 H5V 1320 15J 15J 15J 15J 15J 15J 15J 15J 15J H5V / 15.8x16 La (mm) Belt Reference 2159 2286 2413 2540 2692 2845 2997 3175 3353 H5V 1400 H5V 1500 H5V 1600 H5V 1700 H5V 1800 H5V 1900 H5V 2000 H5V 2120 H5V 2240 La (mm) 15J 15J 15J 15J 15J 15J 15J 15J 15J 3556 3810 4064 4318 4572 4826 5080 5385 5690 H5V / 15.8x16 Belt Reference H5V 2360 H5V 2500 H5V 2650 H5V 2800 H5V 3000 H5V 3150 H5V 3350 H5V 3550 15J 15J 15J 15J 15J 15J 15J 15J La (mm) 5994 6350 6731 7112 7620 8001 8509 9017 • Banded belts in Moulded Raw Edge Cogged construction are available on request. BANDED BELTS : H8V Wrapped V-Belts Standard : ISO 5290 25.4 mm H8V / 25.4x25 Belt Reference H8V 1000 H8V 1060 H8V 1120 H8V 1180 H8V 1250 H8V 1320 H8V 1400 25J 25J 25J 25J 25J 25J 25J La (mm) 2540 2692 2845 2997 3175 3353 3556 25 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt speed up to 42 m/sec • Recommended number of Ribs = 5 (Max) Section H8V H8V / 25.4x25 Belt Reference H8V 2120 H8V 2240 H8V 2360 H8V 2500 H8V 2650 H8V 2800 H8V 3000 Manufacturing Range 2489 - 16866 mm (La) 25J 25J 25J 25J 25J 25J 25J Weight per metre (Kgs) 0.669 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 315 mm (de) 25.4 25 H8V / 25.4x25 La (mm) Belt Reference 5385 5690 5994 6350 6731 7112 7620 H8V 3150 H8V 3350 H8V 3550 H8V 3750 H8V 4000 H8V 4250 H8V 4500 25J 25J 25J 25J 25J 25J 25J La (mm) 8000 8509 9017 9525 10160 10795 11430 • Banded belts in Moulded Raw Edge Cogged construction are available on request. • Prices on request • Non standard stock items are available on request • Std. Designation for Banded belts : Refer page no. 61 29 Minimum Order Qty. Ref. Page no. 62 H8V / 25.4x25 Belt Reference H8V 4750 H8V 5000 H8V 5250 H8V 5500 25J 25J 25J 25J La (mm) 12065 12700 13335 13970 CLASSICAL SECTION : AA Hexagonal Wrapped V-Belts Standard : ISO 5289 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec Manufacturing Range 1143 - 9525 mm (Li) 13 mm 10 mm AA Section Weight per metre (Kgs) 0.150 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 13 10 75 mm (dp) AA Nominal Length (Inches) : Li/Le Section AA / 13x10 Minimum Order Qty. 36 Belt Reference Pitch Length (mm) Li (inches) Belt Reference Pitch Length (mm) Li (inches) Belt Reference Pitch Length (mm) Li (inches) Belt Reference Pitch Length (mm) Li (inches) AA 51 AA 53 AA 58 AA 60 AA 65 AA 66 AA 68 AA 70 AA 71 1331 1382 1509 1560 1687 1712 1763 1814 1839 51 53 58 60 65 66 68 70 71 AA 73 AA 75 AA 76 AA 77 AA 78 AA 80 AA 83 AA 85 AA 87 1890 1941 1966 1992 2017 2068 2144 2195 2246 73 75 76 77 78 80 83 85 87 AA 88 AA 90 AA 91 AA 95 AA 96 AA 102 AA 103 AA 105 AA 108 2271 2322 2347 2449 2474 2627 2652 2703 2779 88 90 91 95 96 102 103 105 108 AA 112 AA 120 AA 128 AA 146 AA 152 AA 180 AA 185 2881 3084 3287 3744 3897 4608 4735 112 120 128 146 152 180 185 CLASSICAL SECTION : BB Hexagonal Wrapped V-Belts Standard : ISO 5289 Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec Belt Reference Pitch Length (mm) BB 75 BB 81 BB 83 BB 85 BB 88 BB 90 BB 95 BB 97 BB 99 BB 101 BB 105 BB 108 1948 2100 2151 2202 2278 2329 2456 2507 2558 2608 2710 2786 Li (inches) 75 81 83 85 88 90 95 97 99 101 105 108 17 mm Manufacturing Range 1016 - 10414 mm (Li) 14 mm BB Section Belt Reference Pitch Length (mm) BB 111 BB 112 BB 115 BB 116 BB 120 BB 121 BB 125 BB 126 BB 128 BB 131 BB 133 BB 135 2862 2888 2964 2989 3091 3116 3218 3243 3294 3370 3421 3472 Weight per metre (Kgs) 0.226 Section BB / 17x14 Li (inches) 111 112 115 116 120 121 125 126 128 131 133 135 Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) BB 40 125 mm (dp) 17 14 Nominal Length (Inches) : Li Belt Reference Pitch Length (mm) BB 137 BB 141 BB 144 BB 145 BB 146 BB 154 BB 155 BB 156 BB 158 BB 162 BB 163 BB 173 3523 3624 3701 3726 3751 3955 3980 4005 4056 4158 4183 4437 Li (inches) 137 141 144 145 146 154 155 156 158 162 163 173 Minimum Order Qty. (No. of V-Belts) 27 Belt Reference Pitch Length (mm) BB 174 BB 180 BB 184 BB 194 BB 195 BB 210 BB 240 BB 270 BB 300 BB 310 4463 4615 4717 4971 4996 5377 6139 6901 7663 7917 Li (inches) 174 180 184 194 195 210 240 270 300 310 CLASSICAL SECTION : CC Hexagonal Wrapped V-Belts Standard : ISO 5289 22 mm Features : • Oil resistant • Antistatic • Temperature range : -180C to +700C • Maximum belt linear speed : 30 m/sec Manufacturing Range 1854 - 16713 mm (Li) 17 mm CC Section Weight per metre (Kgs) 0.386 Section CC / 22x17 Dimensions Angle Rec. Min Degree Pulley Dia. Topwidth(mm) Thickness(mm) CC 40 200 mm (dp) 22 17 Nominal Length (Inches) : Li Minimum Order Qty. (No. of V-Belts) 22 Belt Reference Pitch Length (mm) Li (inches) Belt Reference Pitch Length (mm) Li (inches) Belt Reference Pitch Length (mm) Li (inches) Belt Reference Pitch Length (mm) Li (inches) CC 75 CC 81 CC 85 CC 86 CC 90 CC 94 CC 96 CC 105 CC 106 CC 112 1961 2113 2215 2240 2342 2444 2494 2723 2748 2901 75 81 85 86 90 94 96 105 106 112 CC 119 CC 120 CC 122 CC 126 CC 128 CC 135 CC 144 CC 153 CC 158 CC 162 3079 3104 3155 3256 3307 3485 3714 3942 4069 4171 119 120 122 126 128 135 144 153 158 162 CC 165 CC 173 CC 180 CC 189 CC 193 CC 195 CC 204 CC 206 CC 210 CC 224 4247 4450 4628 4857 4958 5009 5238 5288 5390 5746 165 173 180 189 193 195 204 206 210 224 CC 234 CC 240 CC 270 CC 300 CC 313 CC 330 CC 360 CC 390 CC 420 6000 6152 6914 7676 8006 8438 9200 9962 10724 234 240 270 300 313 330 360 390 420 • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 30 LIGHT DUTY BELTS : 3L Wrapped V-Belts : Blue Dry-Cover, Kevlar Belts for Lawn & Garden Application Standard : RMA IP 23 Features : • High tensile strength • Non extensibility • High resistance to shock loads • High resistance to wear and tear • Reduced slippage while clutching • High resistance to repeated reverse flexing • High resistance to oil, heat and cracking Manufacturing Range 280 - 4064 mm (La) 10 mm Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 3L 10 6 39 mm (de) Nominal Length (inches) = Belt No./10 = La Section 6 mm Section : 3L 3L / 10x6 Weight per metre (Kgs) 0.057 3L / 10x6 Belt Reference Outside Length (inches) La (mm) DRYB-3L-K-110 DRYB-3L-K-120 DRYB-3L-K-130 DRYB-3L-K-140 DRYB-3L-K-150 DRYB-3L-K-160 DRYB-3L-K-170 DRYB-3L-K-180 DRYB-3L-K-190 DRYB-3L-K-200 DRYB-3L-K-210 DRYB-3L-K-220 DRYB-3L-K-230 DRYB-3L-K-235 DRYB-3L-K-240 DRYB-3L-K-250 DRYB-3L-K-260 DRYB-3L-K-270 DRYB-3L-K-280 DRYB-3L-K-290 DRYB-3L-K-295 DRYB-3L-K-300 DRYB-3L-K-310 DRYB-3L-K-315 DRYB-3L-K-320 DRYB-3L-K-330 11 12 13 14 15 16 17 18 19 20 21 22 23 23.5 24 25 26 27 28 29 29.5 30 31 31.5 32 33 279 305 330 356 381 406 432 457 483 508 533 559 584 597 610 635 660 686 711 737 749 762 787 800 813 838 50 3L / 10x6 Belt Reference Outside Length (inches) La (mm) Belt Reference DRYB-3L-K-340 DRYB-3L-K-350 DRYB-3L-K-355 DRYB-3L-K-360 DRYB-3L-K-365 DRYB-3L-K-370 DRYB-3L-K-380 DRYB-3L-K-385 DRYB-3L-K-390 DRYB-3L-K-400 DRYB-3L-K-405 DRYB-3L-K-410 DRYB-3L-K-415 DRYB-3L-K-420 DRYB-3L-K-430 DRYB-3L-K-440 DRYB-3L-K-450 DRYB-3L-K-460 DRYB-3L-K-470 DRYB-3L-K-480 DRYB-3L-K-490 DRYB-3L-K-500 DRYB-3L-K-510 DRYB-3L-K-520 DRYB-3L-K-530 DRYB-3L-K-540 34 35 35.5 36 36.5 37 38 38.5 39 40 40.5 41 41.5 42 43 44 45 46 47 48 49 50 51 52 53 54 864 889 902 914 927 940 965 978 991 1016 1029 1041 1054 1067 1092 1118 1143 1168 1194 1219 1245 1270 1295 1321 1346 1372 DRYB-3L-K-550 DRYB-3L-K-560 DRYB-3L-K-570 DRYB-3L-K-580 DRYB-3L-K-590 DRYB-3L-K-600 DRYB-3L-K-610 DRYB-3L-K-620 DRYB-3L-K-630 DRYB-3L-K-640 DRYB-3L-K-650 DRYB-3L-K-660 DRYB-3L-K-670 DRYB-3L-K-680 DRYB-3L-K-690 DRYB-3L-K-700 DRYB-3L-K-710 DRYB-3L-K-720 DRYB-3L-K-730 DRYB-3L-K-740 DRYB-3L-K-750 DRYB-3L-K-760 DRYB-3L-K-770 DRYB-3L-K-780 DRYB-3L-K-790 • Other Lawn & Garden belts to suit special manufacturer - specific applications available upon request • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 31 Minimum Order Qty. (No. of V-Belts) Outside Length (inches) 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 La (mm) 1397 1422 1448 1473 1499 1524 1549 1575 1600 1626 1651 1676 1702 1727 1753 1778 1803 1829 1854 1880 1905 1930 1956 1981 2007 LIGHT DUTY BELTS : 4L Wrapped V-Belts : Blue Dry-Cover, Kevlar Belts for Lawn & Garden Application Standard : RMA IP 23 Features : 13 mm • High tensile strength • Non extensibility 8 mm • High resistance to shock loads • High resistance to wear and tear Section : 4L • Reduced slippage while clutching • High resistance to repeated reverse flexing • High resistance to oil, heat and cracking Manufacturing Range 381 - 4928 mm (La) Weight per metre (Kgs) 0.104 Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 40 13 8 64 mm (de) 4L Nominal Length (inches) = Belt No./10 = La Section 4L / 13x8 4L / 13x8 Minimum Order Qty. (No. of V-Belts) 40 4L / 13x8 Belt Reference Outside Length (inches) La (mm) Belt Reference Outside Length (inches) La (mm) Belt Reference Outside Length (inches) DRYB-4L-K-170 DRYB-4L-K-180 DRYB-4L-K-190 DRYB-4L-K-200 DRYB-4L-K-210 DRYB-4L-K-215 DRYB-4L-K-220 DRYB-4L-K-230 DRYB-4L-K-240 DRYB-4L-K-250 DRYB-4L-K-260 DRYB-4L-K-270 DRYB-4L-K-280 DRYB-4L-K-290 DRYB-4L-K-295 DRYB-4L-K-300 DRYB-4L-K-305 DRYB-4L-K-310 DRYB-4L-K-315 DRYB-4L-K-320 DRYB-4L-K-325 DRYB-4L-K-330 DRYB-4L-K-335 DRYB-4L-K-340 DRYB-4L-K-345 DRYB-4L-K-350 DRYB-4L-K-355 DRYB-4L-K-360 DRYB-4L-K-370 DRYB-4L-K-375 DRYB-4L-K-380 DRYB-4L-K-390 DRYB-4L-K-395 DRYB-4L-K-400 DRYB-4L-K-405 DRYB-4L-K-410 DRYB-4L-K-420 DRYB-4L-K-425 DRYB-4L-K-430 DRYB-4L-K-440 DRYB-4L-K-450 17 18 19 20 21 21.5 22 23 24 25 26 27 28 29 29.5 30 30.5 31 31.5 32 32.5 33 33.5 34 34.5 35 35.5 36 37 37.5 38 39 39.5 40 40.5 41 42 42.5 43 44 45 432 457 483 508 533 546 559 584 610 635 660 686 711 737 749 762 775 787 800 813 826 838 851 864 876 889 902 914 940 953 965 991 1003 1016 1029 1041 1067 1080 1092 1118 1143 DRYB-4L-K-455 DRYB-4L-K-460 DRYB-4L-K-470 DRYB-4L-K-480 DRYB-4L-K-490 DRYB-4L-K-495 DRYB-4L-K-500 DRYB-4L-K-510 DRYB-4L-K-520 DRYB-4L-K-530 DRYB-4L-K-540 DRYB-4L-K-550 DRYB-4L-K-560 DRYB-4L-K-570 DRYB-4L-K-580 DRYB-4L-K-590 DRYB-4L-K-600 DRYB-4L-K-610 DRYB-4L-K-620 DRYB-4L-K-630 DRYB-4L-K-640 DRYB-4L-K-650 DRYB-4L-K-660 DRYB-4L-K-665 DRYB-4L-K-670 DRYB-4L-K-680 DRYB-4L-K-690 DRYB-4L-K-700 DRYB-4L-K-710 DRYB-4L-K-720 DRYB-4L-K-730 DRYB-4L-K-740 DRYB-4L-K-750 DRYB-4L-K-760 DRYB-4L-K-770 DRYB-4L-K-780 DRYB-4L-K-785 DRYB-4L-K-790 DRYB-4L-K-800 DRYB-4L-K-810 DRYB-4L-K-820 45.5 46 47 48 49 49.5 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 66.5 67 68 69 70 71 72 73 74 75 76 77 78 78.5 79 80 81 82 1156 1168 1194 1219 1245 1257 1270 1295 1321 1346 1372 1397 1422 1448 1473 1499 1524 1549 1575 1600 1626 1651 1676 1689 1702 1727 1753 1778 1803 1829 1854 1880 1905 1930 1956 1981 1994 2007 2032 2057 2083 DRYB-4L-K-830 DRYB-4L-K-840 DRYB-4L-K-850 DRYB-4L-K-860 DRYB-4L-K-870 DRYB-4L-K-880 DRYB-4L-K-885 DRYB-4L-K-890 DRYB-4L-K-895 DRYB-4L-K-900 DRYB-4L-K-905 DRYB-4L-K-910 DRYB-4L-K-920 DRYB-4L-K-925 DRYB-4L-K-930 DRYB-4L-K-940 DRYB-4L-K-950 DRYB-4L-K-960 DRYB-4L-K-970 DRYB-4L-K-980 DRYB-4L-K-990 DRYB-4L-K-995 DRYB-4L-K-1000 DRYB-4L-K-1010 DRYB-4L-K-1020 DRYB-4L-K-1030 DRYB-4L-K-1040 DRYB-4L-K-1045 DRYB-4L-K-1050 DRYB-4L-K-1060 DRYB-4L-K-1070 DRYB-4L-K-1080 DRYB-4L-K-1110 DRYB-4L-K-1120 DRYB-4L-K-1130 DRYB-4L-K-1160 DRYB-4L-K-1200 DRYB-4L-K-1260 DRYB-4L-K-1390 DRYB-4L-K-1580 83 84 85 86 87 88 88.5 89 89.5 90 90.5 91 92 92.5 93 94 95 96 97 98 99 99.5 100 101 102 103 104 104.5 105 106 107 108 111 112 113 116 120 126 139 158 • Other Lawn & Garden belts to suit special manufacturer - specific applications available upon request • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 32 La (mm) 2108 2134 2159 2184 2210 2235 2248 2261 2273 2286 2299 2311 2337 2350 2362 2388 2413 2438 2464 2489 2515 2527 2540 2565 2591 2616 2642 2654 2667 2692 2718 2743 2819 2845 2870 2946 3048 3200 3531 4013 LIGHT DUTY BELTS : 5L Wrapped V-Belts : Blue Dry-Cover, Kevlar Belts for Lawn & Garden Application Standard : RMA IP 23 Features : • High tensile strength • Non extensibility • High resistance to shock loads • High resistance to wear and tear • Reduced slippage while clutching • High resistance to repeated reverse flexing • High resistance to oil, heat and cracking 5L / 17x10 Belt Reference Outside Length (inches) DRYB-5L-K-230 DRYB-5L-K-240 DRYB-5L-K-250 DRYB-5L-K-260 DRYB-5L-K-270 DRYB-5L-K-280 DRYB-5L-K-290 DRYB-5L-K-300 DRYB-5L-K-310 DRYB-5L-K-320 DRYB-5L-K-330 DRYB-5L-K-340 DRYB-5L-K-350 DRYB-5L-K-360 DRYB-5L-K-370 DRYB-5L-K-380 DRYB-5L-K-390 DRYB-5L-K-400 DRYB-5L-K-410 DRYB-5L-K-415 DRYB-5L-K-420 DRYB-5L-K-430 DRYB-5L-K-440 DRYB-5L-K-450 DRYB-5L-K-460 DRYB-5L-K-470 DRYB-5L-K-480 DRYB-5L-K-490 DRYB-5L-K-500 DRYB-5L-K-510 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 41.5 42 43 44 45 46 47 48 49 50 51 Manufacturing Range 533 - 5588 mm (La) 17 mm 10 mm Dimensions Angle Rec. Min Topwidth(mm) Thickness(mm) Degree Pulley Dia. 5L 40 10 89 mm (de) 17 Nominal Length (inches) = Belt No./10 = La Section Section : 5L 5L / 17x10 La (mm) 584 610 635 660 686 711 737 762 787 813 838 864 889 914 940 965 991 1016 1041 1054 1067 1092 1118 1143 1168 1194 1219 1245 1270 1295 Belt Reference Outside Length (inches) DRYB-5L-K-520 DRYB-5L-K-530 DRYB-5L-K-540 DRYB-5L-K-550 DRYB-5L-K-560 DRYB-5L-K-570 DRYB-5L-K-580 DRYB-5L-K-590 DRYB-5L-K-600 DRYB-5L-K-610 DRYB-5L-K-620 DRYB-5L-K-630 DRYB-5L-K-640 DRYB-5L-K-650 DRYB-5L-K-660 DRYB-5L-K-670 DRYB-5L-K-680 DRYB-5L-K-690 DRYB-5L-K-700 DRYB-5L-K-710 DRYB-5L-K-720 DRYB-5L-K-730 DRYB-5L-K-740 DRYB-5L-K-750 DRYB-5L-K-760 DRYB-5L-K-770 DRYB-5L-K-780 DRYB-5L-K-790 DRYB-5L-K-800 DRYB-5L-K-810 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 Minimum Order Qty. (No. of V-Belts) 30 5L / 17x10 La (mm) Belt Reference 1321 1346 1372 1397 1422 1448 1473 1499 1524 1549 1575 1600 1626 1651 1676 1702 1727 1753 1778 1803 1829 1854 1880 1905 1930 1956 1981 2007 2032 2057 DRYB-5L-K-820 DRYB-5L-K-830 DRYB-5L-K-840 DRYB-5L-K-850 DRYB-5L-K-860 DRYB-5L-K-870 DRYB-5L-K-880 DRYB-5L-K-890 DRYB-5L-K-900 DRYB-5L-K-910 DRYB-5L-K-920 DRYB-5L-K-930 DRYB-5L-K-940 DRYB-5L-K-950 DRYB-5L-K-960 DRYB-5L-K-970 DRYB-5L-K-980 DRYB-5L-K-990 DRYB-5L-K-1000 DRYB-5L-K-1010 DRYB-5L-K-1020 DRYB-5L-K-1030 DRYB-5L-K-1040 DRYB-5L-K-1050 DRYB-5L-K-1060 DRYB-5L-K-1070 DRYB-5L-K-1080 DRYB-5L-K-1090 DRYB-5L-K-1100 • Other Lawn & Garden belts to suit special manufacturer - specific applications available upon request • Prices on request • References in bold are standard stock items • Non standard stock items are available on request 33 Weight per metre (Kgs) 0.157 Outside Length (inches) 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 La (mm) 2083 2108 2134 2159 2184 2210 2235 2261 2286 2311 2337 2362 2388 2413 2438 2464 2489 2515 2540 2565 2591 2616 2642 2667 2692 2718 2743 2769 2794 PIX COMBINE HARVESTER BELTS Features : • Designed for efficient power transmission with minimised heat generation • Provides high stability and minimizes deflection in the cross section • Minimum stretch stiff polyester cords have been designed for heavy power transmission, while at the same time ensuring a very high degree of length stability • The sides of the belt have excellent abrasion resistant properties contributing significantly to long and useful belt life • Moulded cogs reduces bending stresses and improves heat dissipation in Cut Edge construction BELTS TO FIT AS CLAAS BELT REFERENCE HC 060306 HC 061253 HC 061360 HC 061700 HC 061701 HC 064168 HC 070953 HC 233843 HC 500863 HC 501925 HC 506671 HC 523252 HC 532011 HC 560562 HC 603015 HC 603017 HC 603048 HC 603122 HC 603247 HC 603317 HC 603336 HC 603337 HC 603354 HC 603380 HC 609762 HC 609822 HC 609823 HC 610196 HC 610197 HC 610830 HC 610833 HC 610835 HC 617309 HC 623252 HC 629000 HC 629001 HC 629002 HC 629035 HC 629036 HC 629081 HC 629214 HC 629279 HC 629366 HC 629410 HC 629436 HC 629441 HC 629510 HC 629580 HC 629732 HC 629737 HC 629756 HC 629763 HC 629769 HC 629836 HC 630025 HC 630043 HC 630144 HC 630156 HC 631904 HC 633030 HC 635494 HC 636021 HC 640653 HC 644015 CLAAS BELT APPLICATION MODEL/MACHINE REFERENCE COUNTER SHAFT DRIVE STRAW CHOPPER STRAW CHOPPER STRAW CHOPPER FOR GRAIN INTERMEDIATE DRIVE DOM 80, 85, 86 DOM 100,105 DOM 76, 96, 98 COM DOM 114,115,116 DOM 112,114,115,116 COM DOM 114,115,116 FAN SCREEN TURNING DRUM DRIVE FEEDER ELEVATOR FOR STRAW DISTRIBUTOR SIEVE BOX HYDR PUMP CUTTING TABLE CLUTCH CYLINDER 650-1500 RPM SIEVE PAN COM DOM 114,115,116 MATADOR, STD, GIGANT DOM 80, 85 DOM 86, 98 MATADOR, STD, GIGANT DOM 80, 85 DOM 80, 85 DOM 58, 68, 86 DOM 86, 98 DOM 76, 86, 96 DOM 76, 86, 96 DOM 86 DOM 76, 86, 96, 98 DOM 76, 86, 96, 98 DOM 106,108H DOM 68,106 DOM 106,108H,108M DOM 98,108 DOM 98,108 MATADOR, STD, GIGANT MATADOR, STD, GIGANT SEN, MERC 50,60 (DET) SEN, MERC 50,60 (NON DET) MATADOR, STD, GIGANT GIGANT, MERC, SEN STRAW ROLLER TRACTION VARIATOR RETURNS AUGER FAN DRIVE CYLINDER COUNTERSHART DRIVE SIEVE PAN TRACTION UP TRACTION LO FAN TURNING DRUM DRIVE KNIFE DRIVE KNIFE DRIVE FAN CYLINDER (USED IN PAIRS) KNIFE DRIVE THRESHING MACHINE DRUM HYDR PUMP TRACTION DRIVE HYDR PUMP CYLINDER VARIABLE SPEED STRAW WALKER GRAIN AUGER KNIFE DRIVE MAIN DRUM KNIFE DRIVE TRACTION TABLE THRESHING MACHINE THRESHING MACHINE ELEVATOR TRACTION TRACTION GRAIN TANK GRAIN TANK DOM 98,106 DOM 98,100-105,106 DOM 100-105 DOM 80, 85,100,106 DOM 80, 85,100,105 DOM 66,100,105 DOM 76, 80, 85, 86, 96 DOM 106,108H DOM 106 DOM 76, 96,106 DOM 56, 66, 76 DOM 106, 108H DOM 80'85'100-105 DOM 80'85' DOM 86, 98,100-105 DOM 56, 66, 76 DOM 48, 58, 68 DOM 108H DOM 108M DOM 98,108M, 68 GIGANT, MATADOR GIGANT, MATADOR SEN, GIGANT, MERCATOR MATADOR, STD, GIGANT SF SEN DOM 80-85, SEN DOM 56, 66,8 6 MATADOR, GIGANT DOM 106,108H,108M DOM 112 MAIN DRIVE FLAT DRUM FLAT MAIN DRIVE TRACTION DRIVE TRACTION DRIVE HYDR PUMP STRAW SPREADER GRAIN TANK RETURNS AUGER ROLLER • Prices on request • Non standard stock items are available on request 34 BELTS TO FIT AS CLAAS BELT REFERENCE HC 644016 HC 644017 HC 644018 HC 644177 HC 653059 HC 653060 HC 653062 HC 653063 HC 653064 HC 653120 HC 653121 HC 653380 HC 653450 HC 653779 HC 653933 HC 654013 HC 654534 HC 655408 HC 656028 HC 670224 HC 671012 HC 671013 HC 671015 HC 671083 HC 671209 HC 672353 HC 672358 HC 672359 HC 673601 HC 673614 HC 673625 HC 673638 HC 673639 HC 673690 HC 680334 HC 687046 HC 692149 HC 692150 HC 702509 HC 702536 HC 706087 HC 713506 HC 720696 HC 720866 HC 750294 HC 755070 HC 767057 HC 769202 HC 774099 HC 778561 HC 778717 HC 801222 HC 802931 HC 061353 HC 176442 HC 176542 HC 176543 HC 603430 HC 644209 HC 644419 HC 644447 HC 644538 HC 644685 HC 644781 HC 644866 HC 661093 HC 661245 HC 661345 HC 667242 CLAAS BELT APPLICATION MODEL/MACHINE REFERENCE ROLLER HYDR PUMP MAIN DRIVE CYLINDER 500-1400 RPM MAIN DRIVE MAIN 3HB BAND MAIN DRIVE CUTTING TABLE MAIN DRIVE SHAKER SHOE DRIVE FAN (HEX) FANNING MILL STRAW SPREADER TANK UNLOADER DRIVE STRAW WALKER UNLOADING GRAIN TANK UNLOADING GRAIN TANK TRACTION DRIVE HYDR PUMP REEL VARIATOR MAIN DRIVE FROM CUTTING TABLE CYLINDER VARIABLE SPEED TRACTION VARI DRIVE VARI SPEED FAN CUTTING TABLE SHAKER SHOE FANNING MILL SHAKER SHOE RETURN AUGER STRAW WALKER GRAIN TANK UNLOADING HYDR PUMP TRACTION DRIVE TABLE CLUTCH CUTTING TABLE GRAIN AUGER DOM 116 COM 115,116,DOM 115,116 DOM 115,116 DOM 68,106 MERC 50,60,75 SEN MERC 50,60,75 SEN MERC 50,60,75 SEN MERC 50,60,75 SEN MERC 50,60,75 SEN MERC 50,60,75 SEN GIGANT, SEN MERCATOR S70,75,SEN MERCATOR 50,60,S70,75 MERCATOR 50,60,S70,75 SEN SEN S70,75 MERCATOR 50,60,SEN DOM 80,85,MER 50,60,S70,75 DOM 112, 114,115,116 DOM 56,66,76,80,85,86,96,98 DOM 202 DOM 80-85 DOM 80-85 DOM 56,66,76,80-85,86,96,98 DOM 100-105 DOM 80-85 DOM 80-85 DOM 80-85 DOM 76,80-85,96 DOM 76,80-85,96 DOM 68,86,98 DOM 80-85 DOM 80-85 DOM 68,108H,108M MER S70,75 DOM 202 DOM 202 CONSUL CONSUL CONSUL SHAKER MAIZE PICKER MAIZE PICKER CUTTING TABLE VARI CYLINDER UNLOADING GRAIN TANK TO CUTTING TABLE TURNING DRUM TRACTION DRIVE TRACTION DRIVE HYDR PUMP HYDR PUMP KNIFE DRIVE STRAW WALKER VARI SPEED FAN KNIFE DRIVE THRESHING MACHINE AIR INTAKE STRAW CHOPPER DRIVE DRUM DRIVE HYDROSTATIC PUMP DRIVE HYDROSTATIC PUMP DRIVE CUTTER BAR CLUTCH DRIVE SIEVE PAN DRIVE CUTTER BAR CLUTCH DRIVE AIR INTAKE DRIVE DRUM V/S DRIVE STRAW COPPER DRIVE FAN DRIVE SIEVE PAN DRIVE STRAW COPPER DRIVE ENGINE SHAFT DRIVE COOLER FAN DRIVE FAN & ROTARY SCREEN DRIVE CONSUL CONSUL, DOM 80-85 MATADOR, SEN MERCATOR 50,60,S75,75 MATADOR, DOM 80-85,86,98 DOM 80-85,100,105 CONSUL DOM,SEN,MERCATOR SEN, MATADOR DOM 80-85,96,98 DOM 203 - 218MEGA LEXION 415 -430 AND 440 - 460 DOM 106 - 108 DOM 76-96/TRACTION DRIVE JAGUAR 675-680 DOM108 - 228MEGA PRIMARY LEXION RANGE COMMANDER 116 - 228 DOM 203 - 218 MEGA DOM 203 - 204 MEGA PRIMARY LEXION 480 LEXION 415 - 460 THIRD STAGE LEXION 480 FINAL LEXION 440 - 460 DOM 208 - 218 MEGA DOM 203 - 218 MEGA LEXION RANGE • Prices on request • Non standard stock items are available on request 35 BELTS TO FIT AS CLAAS BELT REFERENCE HC 667248 HC 667249 HC 667250 HC 667251 HC 667252 HC 667427 HC 667453 HC 667454 HC 667456 HC 667477 HC 667554 HC 667681 HC 667684 HC 667798 HC 742025 HC 749712 HC 821734 CLAAS BELT APPLICATION MODEL/MACHINE REFERENCE DRUM DRIVE IMPELLOR DRUM DRIVE UNLOADER DRIVE SPEED REDUCING GEAR BOX DRIVE SIEVE PAN DRIVE HYBRID DRIVE DRUM DRIVE INTAKE DRIVE LEXION RANGE ROTARY SCREEN DRIVE STRAW WALKER DRIVE HYBRID DRIVE GRAIN TANK UNLOADER DRIVE STRAW CHOPPER DRIVE STRAW SPREADER DRIVE KNIFE DRIVE STRAW CHOPPER DRIVE ROTARY SCREEN DRIVE LEXION 440 - 460/415 - 430 LEXION RANGE LEXION 440 - 460& 480 LEXION RANGE SECOND STAGE LEXION RANGE SECOND STAGE LEXION 480 LEXION 440 - 460 LEXION 440 - 460 & 480 LEXIO 440-460 & 480 LEXION RANGE 1ST STAGE LEXION 480 LEXION 405 - 430 FOURTH STAGE LEXION 415 -430 1ST STAGE LEXION 480 LEXION 480 3RD STAGE LEXION 480 DOM 108 -118 BELTS TO FIT AS BIZON BELT REFERENCE Z40 Z50 Z56 Z40 Z50 Z57 Z40 Z50 Z56 Z40 Z50 Z56 Z40 Z50 Z56 Z40 Z50 Z40 Z50 Z56 Z40 Z50 Z56 Z56 SUPER BIZON BELT APPLICATION JACKSHAFT FEEDER JACKSHAFT FEEDER REEL VARI SPEED THRESHING DRUM VARI SPEED REAL BEATER TANK UNLOADER AUGER TRACTION VARI SPEED GRAIN ELEVATOR UPPER MAIN DRIVE 3HB • Prices on request • Non standard stock items are available on request 36 BELTS TO FIT AS DEUTZ FAHR BELT REFERENCE HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF 01129970 01136747 01139218 01139222 01139231 01139233 01139241 01139242 01139258 01139260 01139301 01141510 01141591 01141595 01141608 01141613 01141615 01141643 01141644 01141645 01141666 01141749 01141941 01143410 01143413 01145025 01145026 01145049 01145051 01145052 01145054 01145055 01145056 01145097 01145188 01145202 02234343 02235177 02235180 02235254 02235532 02237477 06210853 06210890 06210915 06210917 06210922 06210927 06210975 06210990 06210991 06210993 06211014 06211026 06211031 06211053 06212866 06212915 06212918 06212919 06212924 06212933 06215196 06215197 06215199 06215202 06215203 06215204 06215205 06215206 CLAAS BELT OLD PART NUMBER MODEL/MACHINE REFERENCE 88 7753 6.560 CHOPPER TRANSMISSION 1300/02 CHOPPER DRIVE 88, 1102, 1202 GENERATOR 1000, 1200 RADIATOR FAN HYDRAULIC STEERING COMPRESSOR 2385, 2480-2780 FAN DRIVE 1300/02, 3570, 80 STRAW WALKER & FAN 1600, 3610/30/40 CHOPPER TRANSMISSION 2580-2680 CHOPPER TRANSMISSION 2480-2780 COUNTERSHAFT M1000,M1200 STRAW STRIPPER DRUM 3610/30/40 STRAW STRIPPER DRUM 3570, 3580 CUTTING TABLE DRIVE 3570/80, 3610/30/40 STRAW STRIPPER DRUM 3570/80, 3610/30/40 GRAIN TANK CLUTCH 3570/80, 3610/30/40 MAIZE PICKING ATTACHMENTS DRIVE 88 7753 2.116 88 7753 2.134 88 7753 3.123 88 7753 4.344 88 7753 4.369 88 7753 6.511 89 0946 6.183 89 0946 6.044 STRAW CHOPPER 3570/80, 3610 GRAIN TANK EMPTYING STRAW HOOD 3630/40 STRAW STRIP DRUM FEED CHANNEL 4070/75 STRAW STRIP DRUM - TURBO SEPARATOR 4070/75 WALKER TRANS - SHAKER SHOE TRANS 4070/75 CUTTING TABLE DRIVE 4070/75 THRESHING DRUM VARIATOR 4070/75 COUNTERSHAFT THRESHING DRUM 4070/75 STRAW STRIPPER DRUM 4070/75 WALKER TRANS - RETURNS ELEVATOR 4070/75 STRAW WALKER DRIVE 4070/75 ENGINE GRAIN TANK EMPTYING 4070/75 ENGINE - STRAW STRIPPER DRUM 4070/75 FAN SPEED VARIATOR 4070/75 STRAW CHOPPER 4070/75 STRAW WALKER TRANS - VARIATOR 4070/75 BLOWER DRIVE GENERATOR DRIVE BLOWER DRIVE BLOWER DRIVE GENERATOR DRIVE CLEANING FAN COUNTERSHAFT PICK UP RETURNS ELEVATOR 1300/02, 1600, 5570/80, 3610 RETURNS ELEVATOR 2840-2780 GRAIN ELEVATOR 2385 COUNTERSHAFT GRAIN TANK 2480 GRAIN TANK DRIVE 2580-2780 KNIFE DRIVE GRAIN TANK 2480 GRAIN TANK CLUTCH 1300/02 STRAW STRIPPER DRUM 1000, 1200/02 STRAW STRIPPER DRUM 1102, 1202 STRAW STRIPPER DRUM M660, 770,750 COMPRESSOR UNLOADING M600,750 KNIFE DRIVE KNIFE DRIVE 1600 GRAIN TANK COUNTERSHAFT STRAW STRIPPER DRUM REEL/COUNTERSHAFT 1000,1200 COUNTERSHAFT FAN 900-1080 FAN SPEED VARIATOR 1000, 1200/02 COUNTERSHAFT FAN 2480-2780 STRAW STRIPPER DRUM 2480-2680 STRAW STRIPPER DRUM M2385 FEED CHANNEL 2385, 2480-2780 CONVEYOR 88 2215 3.165 88 2215 3.315 88 2215 3.355 88 2215 3.412 88 2215 5.276 88 2215 5.280 88 2215 6.135 88 2215 6.280 88 2215 6.343 88 88 88 88 89 89 89 89 89 89 89 89 7753 7753 7753 7753 0946 0946 0946 0946 0946 0946 0946 0946 4070/75 4070/75 900, 1080 2480,2680 4070/75 5.265 5.289 6.212 6.410 1.303 1.327 1.329 1.503 1.504 1.505 1.510 1.628 • Prices on request • Non standard stock items are available on request 37 BELTS TO FIT AS DEUTZ FAHR Belt Reference HDF 06215209 HDF 06215213 HDF 06215214 HDF 06215215 HDF 06215216 HDF 06215217 HDF 06215220 HDF 06215221 HDF 06215222 HDF 06215233 HDF 06215234 HDF 06215235 HDF 06215236 HDF 06215237 HDF 06215238 HDF 06215239 HDF 06215240 HDF 06215241 HDF 06215243 HDF 06215244 HDF 06215245 HDF 06215248 HDF 06215249 HDF 06215250 HDF 06215253 HDF 06215255 HDF 06215257 HDF 06215258 HDF 06215259 HDF 06215261 HDF 06215262 HDF 06234476 HDF 06236657 HDF 06240268 HDF 06241147 HDF 06241305 HDF 06255583 HDF 06256381 HDF 06256546 HDF 06256619 HDF 06256714 HDF 06257898 HDF 06528420 CLAAS BELT OLD PART NUMBER MODEL/MACHINE REFERENCE TRAVEL DRIVE 2480-2780 TRACTION VARI 900-1002 TRACTION 2580-2685 TRAVEL VARIATOR M900-1080 TRAVEL SPEED VARIATOR 2385 REEL VARIATOR DRUM VARI 900, 1080, 2385, 2480-2780 DRUM VARI 1300 (LONG) M1600 DRUM VARI 1000-1202, 1300-1600, 3570, 3640 FEED CHANNEL 1300/02, M1600 GRAIN TANK DISCHARGE 1300 GRAIN TANK DISCHARGE M1600 DRUM 900-1080 DRUM 900-1080 STRAW STRIPPER DRUM 2685-2780 STRIPPER DRUM 2580, 2780 STRAW STRIPPER DRUM 2480-2780 TANK MAIN DRIVE 2385 COUNTERSHAFT 3570/80 CHOPPER TRANSMISSION 2480-2780 STRAW STRIPPER DRUM 1300/02 CONVEYOR STRAW STRIPPER DRUM 900-1080, 2385 STRAW STRIPPER DRUM 2480-2780 WALKER & SHAKER SHOE DRIVE COUNTERSHAFT 2480 COUNTERSHAFT 2580, 2680, 2780 STRAW STRIPPER DRUM 1600 STRAW STRIPPER DRUM MAIN DRIVE 2685, 2780 STRIPPER FLAT 600, 660, 750 TRACTION DRIVE 600, 660, 750 RETURNS ELEVATOR 1000, 1200/02 GRAIN TANK 1000, 1200/02, 1102 TRACTION VARI (PAIR) 1000-1200, 1102-1202 MAIN DRIVE (PAIR 1300/02/02H COUNTERSHAFT THRESHING DRUM COUNTERSHAFT THRESHING DRUM STRAW STRIPPER DRUM SHAKER SHOE TRANSMISSION ENGINE CHOPPER TRANS 4070/75 STRIPPER DRUM (FLAT 1000-1200 89 0946 1.784 89 89 89 89 89 0946 0946 0946 0946 0946 1.787 1.806 1.886 1.888 1.898 89 89 89 89 89 89 89 89 89 0946 0946 0946 0946 0946 0946 0946 0946 0946 6.049 6.050 6.051 6.052 6.053 6.054 6.057 6.100 6.101 89 89 89 89 89 0946 0946 0946 0946 0946 6.184 6.185 6.189 6.191 6.193 89 89 89 89 0946 0946 0946 0946 6.194 6.321 6.325 6.326 1116 1116 1116 2106 2107 2107 2107 2107 140 270 300 300 100 120 130 140 134 193 173 131 116 159 139 198 1116 120 119 • Prices on request • Non standard stock items are available on request 38 BELTS TO FIT AS DRONNINGBORG BELT REFERENCE BELT APPLICATION BELT REFERENCE BELT APPLICATION HMD 28250931 HMD 28250932 HMD 41911000 HMD 41912300 HMD 41912400 HMD 41926300 HMD 41927800 HMD 41928100 HMD 41929000 HMD 41929100 HMD 41929500 HMD 41930200 HMD 41930300 HMD 41934800 HMD 49135500 HMD 41935700 HMD 41936200 HMD 41942100 HMD 41955900 P. O. A. P. O. A. 10.85 8.30 8.30 6.37 7.03 7.30 7.77 7.90 7.90 8.17 8.17 10.78 11.51 11.72 12.18 19.42 23.37 HMD 41958500 HMD 41964300 HMD 41972100 HMD 41972800 HMD 41978500 HMD 41980400 HMD 41980800 HMD 41982400 HMD 41983500 HMD 41987300 HMD 41987600 HMD 41987800 HMD 41987900 HMD 41988700 HMD 41988900 HMD 41989100 HMD 41990100 HMD 41990200 HMD 41991700 50.42 6.56 84.03 13.46 84.03 199.79 104.92 14.46 16.81 37.30 47.34 17.54 13.73 38.83 38.43 52.29 145.29 145.96 127.08 BELTS TO FIT AS FORTSCHRITT BELT REFERENCE HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF HDF 9911861926 9911861524 9911861516 9911861540 4221668157 9911861268 9911861918 4221668165 4221121885 4221613133 9911861508 9911860435 9911860765 9911860765 9911861493 9911861557 9911861926 9911861901 9911861524 9911861444 4250121764 9911861268 9911861284 9911861918 4221668165 4221121885 4250121772 9911861508 9911860435 4250121780 9911860765 9911861436 9911861557 MODEL/MACHINE REFERENCE BELT APPLICATION E512 E512 E512 E512 E512 E512 E512 E512 E512 E512 E512 E512 E512 E512 E512 E512 E514 E514 E514 E514 E514 E514 E514 E514 E514 E514 E514 E514 E514 E514 E514 E514 E514 ENGINE TO INTERMEDIATE SHAFT ELEVATOR DRIVE TO GRAIN ELEVATOR STRIPPER DRUM TO ELEVATOR DRIVE ELEVATOR DRIVE TO RETURN ELEVATOR MAIN DRIVE DRUM SPEED CLOCK BELT FAN BELTS, DRIVES HYDRAULIC PUMP DRUM BELT GROUND DRIVE FROM INTERMEDIATE SHAFT UNLOADER AUGER BELT DRIVES SHAKERS DRIVES PICK UP CHAINS VARIABLE SPEED ON REELS FROM VARI SPEED OF FAN TO FAN SHAFT WORKS FAN VARI DRIVE DRIVES BIG RIDDLE PULLEY ENGINE TO INTERMEDIATE SHAFT ELEVATOR DRIVE TO GRAIN ELEVATOR STRIPPER DRUM TO ELEVATOR DRIVE ELEVATOR DRIVE TO RETURN ELEVATOR MAIN DRIVE DRUM SPEED CLOCK BELT FAN BELT FAN BELTS, DRIVES HYDRAULIC PUMP DRUM BELT GROUND DRIVE FROM INTERMEDIATE SHAFT UNLOADER AUGER BELT DRIVES SHAKERS DRIVES PICK UP CHAINS DRIVES HEADER FROM VARI SPEED OF FAN TO FAN SHAFT WORKS FAN VARI DRIVE DRIVES BIG RIDDLE PULLEY • Prices on request • Non standard stock items are available on request 39 BELTS TO FIT AS JOHN DEERE BELT REFERENCE HJAT HJAZ HJAH HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ HJZ 28030 22914 79235 20459 20562 20703 20743 20823 21254 21400 21403 21500 21501 25670 28458 29962 30130 30593 30692 30920 31191 31283 32041 32173 32190 32568 33368 33774 33790 33967 34099 34121 34405 34786 34828 35965 36813 37473 38148 38149 38186 38697 38702 38703 38704 39312 39313 39314 41178 41563 41728 42756 42757 43863 43888 43889 43890 44936 46365 46366 46463 46709 46764 51212 BELT APPLICATION MODEL/MACHINE REFERENCE WATERPUMP X 2 TRACTION DRIVE (PAIR) FAN DRIVE REEL SPEED VARI DRIVE REEL DRIVE FAN DRIVE ROTARY SCREEN ELEVATOR DRUM VARI HYDR PUMP UNLOADING SYSTEM DRUM DRIVE (FLAT) SICKLE KNIFE DRIVE STRAW ELEVATOR KNIFE ROTARY SCREEN THRESHING DRUM DRIVE STRAW ELEVATOR HYDR PUMP REEL VARI DRIVE STRAW WALKER THRESHING DRUM DRIVE ROTARY SCREEN DRIVE STRAW CHOP THRESHING DRUM DRIVE WATER PUMP STRAW ELEVATOR DRIVE UNLOADING SYSTEM STRAW CHOPPER MAIN DRIVE TRACTION DRIVE LOW TRACTION LOW TRACTION DRIVE FAN DRIVE ROTARY SCREEN HYDR PUMP SHAKER DRIVE REEL VARI DRIVE CYLINDER FAN DRIVE RETURN PURIFY DRIVE MAIN DRIVE CUTTING TABLE LEAD IN FAN DRIVE FAN DRIVE ROTARY SCREEN 950/60/70 965, 975, 985, 1065/75/85 985, 1075 950/60/70, 975, 955 950/60/70, 955, 975, 1075 950/60/70, 530-630 950-975, 1042-1065, 1166/69 530, 630, 730 950/60/70/955 950/60/70/955 630, 965-975 950/60/70, 955, 1055/75 950/60/70 950/60/70 950/60/70, 955, 975 950/60/70, 955 950/60/70, 955, 985 950/60/70 930/40, 1042/52 1088, 1166, 1177 950/60/70 955, 1055, 975, 1075 952, 955, 1065 975, 1075, 1085 955, 1055, 1057 965/75, 1075 965/75 985, 1075, 1085 1055, 952, 955 952/55/65/75, 1055/75/85 1075 965, 975, 1075, 1085 1065/75/85, 1177 1065/75/85 985, 1075, 1085 985, 1075 HY/4 985, 1075 HY/4 985, 1055/75/85 1085, 1177 1085 HY/4 1085 HY/4 1085/85 HY/4, 1088 1169 HY/4 1065/75, 1166, 1177 1065/75, 1166, 1177 1055/65/75/85 1085 HY/4 1075 HY/4 1088, 1166, 1169, 1174 1088,1177 1088, 1166, 1174, 1177 1088 1088 1088 1088, 1188 1088, 1166, 1188 1166, 1169 HY/4 1088, 1188 1088 1166, 1169 HY/4 1088, 1166/74/77/88 CUTTING TABLE DRIVE CUTTING TABLE DRIVE FAN VARI DRIVE HYDR PUMP DRIVE HYDR PUMP DRIVE COMPRESSOR AIR CONDITION SUCTION FAN FEEDER FEEDER FEEDER CYLINDER FAN MAIN HYDROSTATIC ROTARY SCREEN DISCHARGE • Prices on request • Non standard stock items are available on request 40 BELTS TO FIT AS LAVERDA BELT REFERENCE HL 432232 HL 432243 HL 432244 HL 432250 HL 432433 HL 432436 HL 432437 HL 433038 HL 433128 HL 433129 HL 433133 HL 433134 HL 433138 HL 433143 HL 433157 HL 433162 HL 433182 HL 433184 HL 433189 HL 433236 HL 433256 HL 433281 HL 433289 HL 433316 HL 433406 HL 433409 HL 433410 HL 433413 HL 433417 HL 433418 HL 433422 HL 433424 HL 433430 HL 433431 HL 433435 HL 433440 HL 433442 HL 433455 HL 433456 HL 433457 HL 433458 HL 433467 HL 433531 HL 433537 HL 433540 HL 433968 HL 433970 HL 434138 HL 434140 HL 434245 HL 434250 HL 435117 HL 435120 HL 435124 HL 435125 HL 435127 HL 435130 HL 435138 HL 435146 HL 435152 HL 4311127 HL 4311134 HL 4311212 HL 4311213 HL 4311217 HL 4311218 HL 4311221 HL 4311222 HL 4311314 HL 4311315 HL 4311316 HL 4311318 HL 4311319 HL 4311418 BELT APPLICATION MODEL/MACHINE REFERENCE HYDR PUMP DRIVE OIL PUMP GRAIN TANK DISCHARGE DRIVE MAIN FAN DRIVE GRAIN & TAILINGS AUGER DE AWNER PADD DRIVE DE AWNER BEATERS DRIVE COMPRESSOR SELECTOR FAN DRIVE COMPRESSOR DRIVE ROTARY FILTER RETURN BELT ROTARY FILTER ROTARY FILTER ROTARY FILTER BELT BELT FOR BLOWER ROTARY FILTER DRIVE BELT FOR BLOWER FAN RETURN BELT ROTARY FILTER SELECT AUGER BELT OIL PUMP SELECTOR AUGER BELT FAN DRIVE REEL DRIVE FAN DRIVE FAN RETURN BELT FAN DRIVE FAN RETURN BELT GRAIN TANK DISCHARGE DRIVE CONVERTOR 100, 120, 3200 3350, 112, 3450, 3600, 3700 100, 112, 150, 152 120 120, 150, 152 120 100, 120 3900 150, 152 3600, 3700 150, 152 112, 132, 3350, 3450 3600 150, 152, 3900 150 112, 132, 3350, 3450 112, 132, 152, 3350, 3450 150, 152, 3700 3600 112, 132, 3350, 3450 3900 84, 90, 150, 152 100, 112, 132, 3350, 3450 3350, 3450, 112, 132 150, 152 112, 1312, 3350, 3450 112, 1312, 3350, 3450 150, 152 112, 132, 150, 152 3450, 3600, 3700, 3900 MAIN FAN GRAIN TAILINGS AUGER DRIVE DE-AWNER DRIVE REEL DRIVE BELT REEL DRIVE CENTRAL RETURN DRIVE BELT STRAW WALKER DRIVE STRAW WALKER DRIVE REEL DRIVE STRAW WALKER REEL DRIVE AUGER DRIVE STRAW ELEVATOR DRIVE BELT CENTRAL RETURN BELT RETURN DRIVE STRAW WALKER AUGER DRIVE STRAW WALKER AUGER DRIVE REEL VARI DRIVE REEL SPEED VARIATOR THRESHING DRIVE BELT THRESHING DRIVE BELT BEATER DRUM DRIVE TRACTION VARI DRIVE CYLINDER VARI DRIVE CYLINDER VARIATOR BELT TRACTION DRIVE BELT TRACTION VARI DRIVE DRUM DRIVE CYLINDER VARIATOR CYLINDER DRIVE STRAW ELEVATOR GRAIN TAILINGS AUGER HYDRAULIC PUMP TRANS PUMP THRESHING DRIVE HYDRAULIC PUMP 3300, 3600 3600, 3700, 3900 112, 132, 3350 150, 152 112, 120, 132, 150, 152, 3350 100,152 150, 152 112, 132, 3350, 3450 112, 132, 3350, 3450 3900 3200, 3300, 3600, 3800 3600, 3700 112, 150, 152, 3450 112, 132, 150, 152, 3450 3600, 3700, 3900 M90, 3200 84, 3300 112, 132, 3600, 3700, 3900 112, 132, 150, 152, 3350 M100/100AL 120 120 84, 3300 3700, 3900 132, 150, 152, 3450 100, 112, 132, 152, 3450 3600, 3700 84, 100, 3200, 3300 112 3600 3600, 3700 3600, 3700, 3900 112, 3300, 3350 84 112, 3350, 132, 3450 3350, 112 3900 150, 152 3450, 132 3600,3700 THRESHING DRIVE THRESHING DRIVE HYDRAULIC PUMP THRESHING DRIVE BELT THRESHING DRIVE CYLINDER VARI DRIVE FAN CYLINDER DRIVE 3900 • Prices on request • Non standard stock items are available on request 41 BELTS TO FIT AS NEW HOLLAND CLAYSON BELT REFERENCE HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN 066232 186347 230037 230038 230039 230041 230042 230043 230044 230046 230048 230051 230052 230053 230054 230056 230057 230059 230060 230061 230062 230064 230066 230073 230074 230075 230076 230077 230078 230079 230080 230101 230103 230108 230131 230151 230164 309087 309364 320935 321559 323413 323646 324391 326298 327040 327041 327062 328424 330204 330715 333255 333347 333958 334065 335258 336386 336426 336784 337415 350236 353584 354338 356024 356025 356913 362500 364033 364418 367659 BELT APPLICATION MODEL/MACHINE REFERENCE STRAW ELEVATOR DRIVE BEATER DRIVE BELT FORD ENGINE GENERATOR DRIVE ENGINE MERCEDES GRAIN TANK AUGER DRIVE GRAIN TANK AUGER HYDRAULIC PUMP FAN DRIVE ELEVATOR DRIVE DISCHARGE AUGER REEL INTERMEDIATE DRIVE REEL INTERMEDIATE SHAFT UNLOADING SYSTEM TAILINGS ELEVATOR THRESHING DRUM DRIVE TAILINGS ELEV DRIVE STRAW ELEVATOR DRIVE REEL DRIVE GRAIN TANK DRIVE FAN WHEEL DRIVE STRAW WALKER DRIVE BLOWER DRIVE STRAW ELEVATOR KNIFE DRIVE/TRACTION GROUND SPEED VARI DRIVE THRESHING DRUM GROUND SPEED VARI DRIVE THRESHING DRUM DRIVE BEATER DRIVE BEATER DRIVE REEL SPEED DRIVE DISCHARGE AUGER STRAW WALKER DRIVE FAN BELT POWER STEERING GRAIN ELEVATOR DRIVE SICKLE KNIFE DRIVE UNLOADING SYSTEM FAN VARI DRIVE GROUND SPEED TAILINGS ELEVATOR MAIN SHAFT DRIVE INTERMEDIATE REEL, KNIFE UNLOADING SYSTEM FAN BELT GENERATOR DRIVE FORD MOTOR TRACTION DRIVE FAN DRIVE INTERMEDIATE KNIFE DRIVE REEL DRIVE ECCENTRIC & STRAW WALKER UNLOADING SYSTEM REEL VARIATOR HYDR PUMP FAN BELT DEUTZ GENERATOR DRIVE DRUM VARI DRIVE KNIFE DRIVE HYDR PUMP GRAIN ELEVATOR DRIVE ROTARY SCREEN DRIVE GROUND SPEED GROUND SPEED VARI DRIVE SEPARATOR SICKLE KNIFE DRIVE FORD ENG GROUND SPEED VARI DRIVE 8040/55 TF42-44, TX32, TX36 80, 103 80, 89, 103 1550 103, 133-135-140, 1530 80, 89, 103 80, 89, 103, 122, 133, 135, 1520/30 80, 89 80, 89, 122, 1250 80, 103 80, 89, 103 103 80, 89, 103 103 103, 133-135-140, 1530/45 8030/40/55 1520/30/40, 122, 133 80, 89, 103, 133-135-140, 1530/45 122, 133-135-140, 80, 89, 1520 103, 133-135-140, 1530/45 103 103 103, 133-135-140, 1530/45 103, 133-135-140, 80, 89 80, 89 103, 1520, 8060 103-135, 1530-1545, 8030/40/50 103, 122, 80, 1520/30/45 1520 103, 133-135-140, 1530/45 122, 133-135-140 133-135-140, 1530 133-135-140, 1530/45 80, 89 103, 8050/60/70/80 TX32, TX36, 1540/50, 8040 122, 133-135-140 133-135-140, 1530/45 1540, 1540AL, 1550 8070 1540, 1540AL, 1550 1540, 1540AL, 1550 1540, 1540AL, 1550 122, 1520 122, 1520 122, 133-135-140, 1520 122 122, 1520 122, 1520 1520/30, 8030/40 1520/30/40/45/50, 8050/60/70/80 1540/50 1540/50 1520/30/40/45/50, 8050/60/70/80 1540/50 133-135-140, 1530/40 133-135-140, 1530 1540/50, 8030/40/50/55/60 1520/30/40/45/50, 8050/60/70/80 TF42/44, TX30/32/36, 1540 1540/50 1540/50 8030/60 1550, 8070 1550 1540/50 550 1520 • Prices on request • Non standard stock items are available on request 42 BELTS TO FIT AS NEW HOLLAND CLAYSON BELT REFERENCE HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN HN 371222 378672 378989 381237 381489 384397 387454 387460 387469 387931 388280 389245 391143 391650 393326 393519 394426 395955 396750 397297 397298 399058 410896 411543 420606 421173 422731 424318 427455 431784 432642 433639 433746 434044 434045 434046 434047 434160 434222 437033 439495 439496 439832 440780 443775 445640 446969 446970 447041 448794 451481 455865 605529 643353 746894 922872 922911 80434222 80443634 80747177 80754165 80754389 80913151 80913153 80919739 80923019 84015531 84015852 84023277 84023278 84036070 84041518 BELT APPLICATION MODEL/MACHINE REFERENCE FAN BELT ECCENTRIC & STRAW WALKER FAN DRIVE AIR COND DUST SCREEN DRIVE FAN DRIVE RETHRESHER DRIVE DRUM VARI DRIVE TAILINGS ELEVATOR DRIVE CONVEYOR FAN VARI DRIVE INTERMEDIATE DRIVE SHAFT INTER KNIFE DRUM VARIATOR STRAW ELEVATOR DRIVE HYDRAULIC PUMP DRIVE HEADER DRIVE VARIATOR DRIVE COUNTERSHAFT DRIVE INTERMEDIATE DRIVE MAIN SHAFT DRIVE FAN DRIVE INTERMEDIATE DRIVE HYDROSTATIC DRIVE 1520/30/40/45, 8050/60/70 1540/50 8050/60/70/80 TF42/44 8050/60/70/80 8070/80 8070/80 8070/80 8040/50/55/60/70/80 8080 8050/60/70/80 8050/60/70/80 8080 8070/80 8050/60/70/80 8030/40/55/80 8055/60/70 8040/50/60/70/80 8050/60/70/80 8050/60 8050/60 80/60 8050/60/70/80 8070/80 ALTERNATOR DRIVE GRAIN ELEVATOR BOTTON AUGER GROUND SPEED DRIVE FAN DRIVE STRAW WALKER DRIVE MERCEDES ENGINE GRAIN STORAGE DRIVE STRAW ELEVATOR ENGINE TO BEATER SHAFT BEATER TO INTERIM SHAFT ROTARY SEPARATOR INT SEPARATOR DRUM TO INTERIM SHAFT BEATER TO STRAW ELEVATOR COUNTER SHAFT DRIVE DUST CAP FAN DRIVE FAN DRIVE GROUND SPEED VARIATOR BISON STRAW CHOP UNLOADING AUGER GROUND SPEED GROUND SPEED INTERMEDIATE SHAFT DRIVE CLEANING SHOE DRIVE BELT RETHRESHER DRIVE BEATER TO INTERIM DRIVE STRAW WALKER DRIVE INTERMEDIATE SHAFT KNIFE BISO CHOPPER ENGINE TO BEATER SHAFT ENGINE TO BEATER SHAFT BEATER TO FRONT ELEVATOR WATER PUMP DRIVE ALTERNATOR DRIVE (ALT) COMPRESSOR DRIVE STRAW WALKER INTERMEDIATE DRIVE COOLING FAN DRIVE ROTARY SCREEN DRIVE CLEANING FAN DRIVE DUST SCREEN DRIVE (ALT) ROTARY SEPARATOR DRIVE BUBBLE UP BOX DRIVE FAN VARIATOR DRIVE (ALT) FAN VARIATOR DRIVE (ALT) R H DRIVES ROTARY SCREEN DRIVE 8060/8070 8030/40/55 8050 8055 TF42/44, 8080 TF42/44, TX30/32/36 TF42/44, TX30/32 TF42/44 TF42/44 TF42/44 TF42/44 TF42/44, TX30/32/36 TF42/44, TX32/36 8070 TF42/44 TF42/44 TF42/44 TF42/44, TX30/32 TF42/44, TX30/32/36 8055 NORMAL SPEED 8055 8055 TF42/44, TX30/32/36 8070/80 TF42/44, TX30/32/36 8050/60/70/80 1545, 8050 8050 TX30/32/36 TX30/32 TF AND TX RANGE TX RANGE WITH FORD ENGINE TX 32 Tx34 TX RANGE TX 32 - 36 TX 32 - 36 TX 32 - 36 TX 32 - 36 TX 62 - 67 TX 62 - 67 TX RANGE TX RANGE TX 67 TX 67 • Prices on request • Non standard stock items are available on request 43 BELTS TO FIT AS NEW HOLLAND CLAYSON BELT REFERENCE HN HN HN HN HN HN HN HN HN HN HN HN 84078581 89501182 89502654 89513984 89514311 89514989 89817439 89817814 89818830 89831515 89833619 89850770 BELT APPLICATION MODEL/MACHINE REFERENCE DRUM DRIVE ALTERNATOR DRIVE (ALT) FAN VARIATOR DRIVE (ALT) BEATER DRIVE ROTARY SCREEN DRIVE STRAW ELEVATOR DRIVE ROTARY SCREEN DUST SCREEN DRIVE (ALT) DUST SCREEN DRIVE COOLING FAN DRIVE ROTARY SCREEN DRIVE ROTARY SEPARATOR DRIVE TF & TX RANGES TX RANGE TX RANGE TX RANGE TX 64 - 65AND SOME TX 32 TX 32 - 36 TX 32 TX 32 - 36 TX 66 - 68 TC RANGE TX 62 TX 62 - 68 BELTS TO FIT AS CASE/INTERNATIONAL HARVESTER PART NUMBER ON BELTS 1330499C1 1541702C1 191241C3 244420A1 244422A1 PIX LABEL PIX PIX PIX PIX PIX HI HI HI HI HI APPLICATION 1330499 1541702 191241 244420 244422 SEPARATOR DRIVE 1680UP TO 114634 SEPARATOR DRIVE 1680FROM 114635 SEPARATOR DRIVE 1660, 2166,2365, 2366 ROTOR DRIVE 1660, 2166, 2365, 2366 ROTOR DRIVE 1680, 2188 GRASS MACHINERY BELTS PART NUMBER ON BELTS XX052393.1 XX067746.0 XX067747.1 XX067789.0 XX073204.0 XX076401.0 XX077276.0 XX077400.0 XX077796.0 LL077797.0 XX074803.2 XX074771.2 LL070952.2 XX742206.0 XX750193.2 PIX LABEL PIX PIX PIX PIX PIX PIX PIX PIX PIX PIX PIX PIX PIX PIX PIX GMC GMC GMC GMC GMC GMC GMC GMC GMC GMC GMC GMC GMC GMC GMC APPLICATION 052393 067746K 067747K 067789K 073204 076401K 077276 077400K 077796K 077797K 1082K 1083K 1085K 742206 750193 AIR CONDITIONING DRIVE JAGUAR 820 - 840 AUX GEARBOX /ENGINE OUTPUT JAGUAR 870 - 850 AUX GEARBOX /ENGINE OUTPUT JAGUAR 890 - 900 CORN CRACKER DRIVE JAGUAR 830 - 900 CORN CRACKER DRIVE JAGUAR 682 - 685 ENGINE OUTPUT DRIVE JAGUAR 860 ROTARY SCREEN DRIVE JAGUAR 820 - 840 AXIAL FLOW FAN DRIVE JAGUAR 820 - 840 ENGINE OUTPUT DRIVE JAGUAR 860 - 880 820 - 840 (ALT) 265KW ENGINE OUTPUT DRIVE 228KW JAGUAR 820 - 840 (ALT) CUTTING CYLINDER DRIVE JAGUAR 685SL (ALT) 690SL CUTTING CYLINDER DRIVE JAGUAR 685SL (ALT) 695SL CUTTING CYLINDER DRIVE JAGUAR 685L - 690 AXIAL FLOW FAN DRIVE JAGUAR 860 - 880 HYDRAULIC PUMP DRIVE JAGUAR 675 - 680 • Prices on request • Non standard stock items are available on request 44 BELTS TO FIT AS MASSEY FERGUSON BELT REFERENCE HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM BELT REFERENCE 226848 226981 228722 228813 230381 233950 265522 273757 274015 274252 281560 320593 402607 411218 417441 619317 621320 621321 621646 629212 782835 782849 783539 783907 784170 784796 784797 785585 785806 785810 789853 789930 789931 789967 790833 790839 793861 793862 793863 795514 795582 832490 832866 833768 833854 833856 833857 HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM • Prices on request • Non standard stock items are available on request 45 833858 833859 833860 833862 833863 833865 833866 833867 833868 833871 833872 833873 833874 834110 834139 834140 834174 842413 842417 842423 842845 843302 843310 843313 843324 843747 843760 843948 844077 844079 905920 905921 905981 905982 1603701 1615254 1615333 1616477 1616714 1616715 1720255 1724154 1855008 3371438 3377029 3377030 POWER DRIVE TAPER BORE “SPZ” SECTION PULLEYS GROOVE BUSH SIZE 56 56 1 2 1008 1108 SPZ SPZ SPZ 63 63 63 1 2 3 1108 1108 1108 SPZ SPZ SPZ 71 71 71 1 2 3 1108 1108 1108 SPZ SPZ SPZ 75 75 75 1 2 3 1108 1210 1210 SPZ SPZ SPZ SPZ 80 80 80 80 1 2 3 4 1210 1210 1210 1210 SPZ SPZ SPZ SPZ SPZ 90 90 90 90 90 1 2 3 4 5 1210 1610 1610 1610 1610 SPZ SPZ SPZ SPZ SPZ 100 100 100 100 100 1 2 3 4 5 1210 1610 1610 1610 2012 SPZ SPZ SPZ SPZ SPZ 106 106 106 106 106 1 2 3 4 5 1610 1610 1610 1610 2012 SPZ SPZ SPZ SPZ SPZ 112 112 112 112 112 1 2 3 4 5 1610 1610 2012 2012 2012 SPZ SPZ 118 118 1 2 1610 1610 TYPE SIZE SPZ SPZ TYPE SIZE GROOVE BUSH SIZE SPZ SPZ SPZ 118 118 118 3 4 5 2012 2012 2012 SPZ SPZ SPZ SPZ SPZ 125 125 125 125 125 1 2 3 4 5 1610 1610 2012 2012 2012 SPZ SPZ SPZ SPZ SPZ 132 132 132 132 132 1 2 3 4 5 1610 1610 2012 2012 2517 SPZ SPZ SPZ SPZ SPZ 140 140 140 140 140 1 2 3 4 5 1610 1610 2012 2012 2517 SPZ SPZ SPZ SPZ SPZ 150 150 150 150 150 1 2 3 4 5 1610 2012 2012 2517 2517 SPZ SPZ SPZ SPZ SPZ 160 160 160 160 160 1 2 3 4 5 1610 2012 2012 2517 2517 SPZ SPZ SPZ SPZ SPZ 180 180 180 180 180 1 2 3 4 5 1610 2012 2012 2517 2517 SPZ SPZ SPZ SPZ SPZ 200 200 200 200 200 1 2 3 4 5 2012 2012 2012 2517 2517 • Prices on request 46 TYPE SIZE GROOVE BUSH SIZE SPZ SPZ SPZ SPZ SPZ 224 224 224 224 224 1 2 3 4 5 2012 2012 2012 2517 2517 SPZ SPZ SPZ SPZ SPZ 250 250 250 250 250 1 2 3 4 5 2012 2012 2012 2517 2517 SPZ SPZ SPZ SPZ SPZ 280 280 280 280 280 1 2 3 4 5 2012 2012 2517 2517 2517 SPZ SPZ SPZ SPZ SPZ 315 315 315 315 315 1 2 3 4 5 2012 2012 2517 2517 2517 SPZ SPZ SPZ SPZ SPZ 355 355 355 355 355 1 2 3 4 5 2012 2012 2517 2517 2517 SPZ SPZ SPZ SPZ 400 400 400 400 2 3 4 5 2517 2517 2517 3020 SPZ SPZ SPZ SPZ 450 450 450 450 2 3 4 5 2517 2517 3020 3020 SPZ SPZ SPZ SPZ 500 500 500 500 2 3 4 5 2517 2517 3020 3030 POWER DRIVE TAPER BORE “SPA” SECTION PULLEYS TYPE SIZE GROOVE BUSH SIZE TYPE SIZE GROOVE BUSH SIZE TYPE SIZE GROOVE BUSH SIZE SPA SPA 67 67 1 2 1108 1108 SPA SPA SPA SPA SPA 132 132 132 132 132 1 2 3 4 5 1610 2012 2012 2517 2517 SPA SPA SPA SPA SPA 224 224 224 224 224 1 2 3 4 5 2012 2517 2517 3020 3020 SPA SPA SPA 75 75 75 1 2 3 1108 1108 1210 SPA SPA SPA 80 80 80 1 2 3 1210 1210 1210 SPA SPA SPA SPA SPA 140 140 140 140 140 1 2 3 4 5 1610 2012 2517 2517 2517 SPA SPA SPA SPA SPA 250 250 250 250 250 1 2 3 4 5 2012 2517 2517 3020 3020 SPA SPA SPA SPA SPA 90 90 90 90 90 1 2 3 4 5 1210 1610 1610 1615 1615 SPA SPA SPA SPA SPA 150 150 150 150 150 1 2 3 4 5 1610 2012 2517 2517 2517 SPA SPA SPA SPA SPA 280 280 280 280 280 1 2 3 4 5 2012 2517 2517 3020 3535 SPA SPA SPA SPA SPA 100 100 100 100 100 1 2 3 4 5 1610 1610 1610 1615 2012 SPA SPA SPA SPA SPA 160 160 160 160 160 1 2 3 4 5 1610 2012 2517 2517 2517 SPA SPA SPA SPA SPA 315 315 315 315 315 1 2 3 4 5 2012 2517 3020 3020 3535 SPA SPA SPA SPA SPA 106 106 106 106 106 1 2 3 4 5 1610 1610 1610 1615 2012 SPA SPA SPA SPA SPA 170 170 170 170 170 1 2 3 4 5 1610 2012 2517 2517 2517 SPA SPA SPA SPA SPA 355 355 355 355 355 1 2 3 4 5 2012 2517 3020 3020 3535 SPA SPA SPA SPA SPA 112 112 112 112 112 1 2 3 4 5 1610 1610 2012 2012 2012 SPA SPA SPA SPA SPA 180 180 180 180 180 1 2 3 4 5 1610 2012 2517 2517 3020 SPA SPA SPA SPA SPA 400 400 400 400 400 1 2 3 4 5 2517 2517 3020 3020 3535 SPA SPA SPA SPA SPA 118 118 118 118 118 1 2 3 4 5 1610 1610 2012 2012 2012 SPA SPA SPA SPA 190 190 190 190 1 2 3 4 1610 2012 2517 2517 SPA SPA SPA SPA SPA 450 450 450 450 450 1 2 3 4 5 2517 2517 3020 3020 3535 SPA SPA SPA SPA SPA 125 125 125 125 125 1 2 3 4 5 1610 1610 2012 2012 2012 SPA SPA SPA SPA SPA 200 200 200 200 200 1 2 3 4 5 2012 2517 2517 3020 3020 SPA SPA SPA SPA 500 500 500 500 2 3 4 5 2517 3020 3020 3535 • Prices on request 47 POWER DRIVE TAPER BORE “SPB” SECTION PULLEYS TYPE SIZE GROOVE BUSH SIZE TYPE SIZE GROOVE BUSH SIZE TYPE SIZE GROOVE BUSH SIZE SPB SPB SPB 100 100 100 1 2 3 1610 1610 1610 SPB SPB SPB SPB SPB 170 170 170 170 170 1 2 3 4 5 1610 2012 2517 2517 3020 SPB SPB SPB SPB SPB 250 250 250 250 250 1 2 3 4 5 2012 2517 3020 3020 3535 SPB SPB SPB 112 112 112 1 2 3 1610 1610 1610 1610 1610 1610 SPB SPB SPB SPB SPB 180 180 180 180 180 1 2 3 4 5 1610 2517 2517 2517 3020 SPB SPB SPB SPB SPB 280 280 280 280 280 1 2 3 4 5 2012 2517 3020 3020 3535 SPB SPB SPB 118 118 118 1 2 3 SPB SPB SPB SPB SPB 125 125 125 125 125 1 2 3 4 5 1610 2012 2012 2012 2012 SPB SPB SPB SPB SPB 190 190 190 190 190 1 2 3 4 5 2012 2517 2517 2517 3020 SPB SPB SPB SPB SPB 315 315 315 315 315 1 2 3 4 5 2012 2517 3020 3535 3535 SPB SPB SPB SPB SPB 140 140 140 140 140 1 2 3 4 5 1610 2012 2012 2517 2517 SPB SPB SPB SPB SPB 200 200 200 200 200 1 2 3 4 5 2012 2517 2517 3020 3020 SPB SPB SPB SPB 355 355 355 355 2 3 4 5 3020 3020 3535 3535 SPB SPB SPB SPB SPB 150 150 150 150 150 1 2 3 4 5 1610 2012 2517 2517 2517 SPB SPB SPB SPB SPB 212 212 212 212 212 1 2 3 4 5 2012 2517 2517 3020 3020 SPB SPB SPB SPB 400 400 400 400 2 3 4 5 3020 3535 3535 3535 SPB SPB SPB SPB SPB 160 160 160 160 160 1 2 3 4 5 1610 2012 2517 2517 2517 SPB SPB SPB SPB SPB 224 224 224 224 224 1 2 3 4 5 2012 2517 2517 3020 3020 SPB SPB SPB SPB 450 450 450 450 2 3 4 5 3020 3535 3535 3535 SPB SPB SPB SPB 500 500 500 500 2 3 4 5 3020 3535 3535 3535 • Prices on request 48 POWER DRIVE TAPER BORE “SPC” SECTION PULLEYS TYPE SIZE GROOVE BUSH SIZE TYPE SIZE GROOVE BUSH SIZE TYPE SIZE GROOVE BUSH SIZE SPC SPC SPC SPC SPC 200 200 200 200 200 3 4 5 6 8 2517 3020 3535 3535 3535 SPC SPC SPC SPC SPC 300 300 300 300 300 3 4 5 6 8 3535 3535 3535 3535 4040 SPC SPC SPC SPC SPC 450 450 450 450 450 3 4 5 6 8 3535 3535 4040 4545 5050 SPC SPC SPC SPC SPC 224 224 224 224 224 3 4 5 6 8 3020 3535 3535 3535 3535 SPC SPC SPC SPC SPC 315 315 315 315 315 3 4 5 6 8 3535 3535 3535 3535 4040 SPC SPC SPC SPC SPC 500 500 500 500 500 3 4 5 6 8 3535 3535 4040 4545 5050 SPC SPC SPC SPC SPC 250 250 250 250 250 3 4 5 6 8 3020 3535 3535 3535 3535 SPC SPC SPC SPC SPC 355 355 355 355 355 3 4 5 6 8 3535 3535 3535 3535 4040 SPC SPC SPC SPC SPC 280 280 280 280 280 3 4 5 6 8 3535 3535 3535 3535 3535 SPC SPC SPC SPC SPC 400 400 400 400 400 3 4 5 6 8 3535 3535 3535 4040 4545 POWER DRIVE TAPER BUSHES WITH SCREWS BUSH SIZE 1008 1108 1210 1215 1310 1610 1615 2012 2017 2517 2525 3020 3030 3525 3535 4030 4040 4535 4545 5040 5050 MINIMUM BORE MAXIMUM BORE mm inch mm inch 12 12 12 12 14 14 16 16 1/ 2” 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 22 25 30 32 38 38 38 50 7/8" 1" 1 1/4" 20 1" 60 2 1/2" 25 35 40 40 1" 1 1/2" 1 1/2" 75 75 100 50 2" 75 3" 1 1/2" 1 1/2" 2" 3" 4" 4" 100 5" 5" • Prices on request 49 POWER DRIVE POWER DRIVE COUPLINGS DRC/HRC REFERENCE COUPLINGS DESCRIPTION BUSH TYPE DRC DRC DRC DRCE 70F 70H 70S 70 TAPER BORE HUB TAPER BORE HUB SOLID HUB INSERT 1008 1008 DRC DRC DRC DRCE 90F 90H 90S 90 TAPER BORE HUB TAPER BORE HUB SOLID HUB INSERT 1108 1108 DRC DRC DRC DRCE 110F 110H 110S 110 TAPER BORE HUB TAPER BORE HUB SOLID HUB INSERT 1610 1610 DRC DRC DRC DRCE 130F 130H 130S 130 TAPER BORE HUB TAPER BORE HUB SOLID HUB INSERT 1610 1610 DRC DRC DRC DRCE 150F 150H 150S 150 TAPER BORE HUB TAPER BORE HUB SOLID HUB INSERT 2012 2012 DRC DRC DRC DRCE 180F 180H 180S 180 TAPER BORE HUB TAPER BORE HUB SOLID HUB INSERT 2517 2517 DRC DRC DRC DRCE 230F 230H 230S 230 TAPER BORE HUB TAPER BORE HUB SOLID HUB INSERT 3020 3020 DRC DRC DRC DRCE 280F 280H 280S 280 TAPER BORE HUB TAPER BORE HUB SOLID HUB INSERT 3525 3525 POWERDRIVE DRC COUPLINGS are designed for general purpose use and have a quick and easy assembly by taper bush internal or external fitting with iteracting dog design cushioned by rubber inserts that give a fail safe shaft connection. It will accommodate slight misalignment with eight sizes available giving nominal torque from 303150 Nm. • Prices on request 50 POWER DRIVE TYRE FLEX COUPLINGS & TYRES PART REFERENCE BUSH TYPE PART REFERENCE BUSH TYPE TF 40 F TF 40 H TF 40 T 1008 1008 TF 90 F TF 90 H TF 90 T 2517 2517 TF 50 F TF 50 H TF 50 T 1210 1210 TF 100 F TF 100 H TF 100 T 3020 2517 TF 60 F TF 60 H TF 60 T 1610 1610 TF 110 F TF 110 H TF 110 T 3020 3020 TF 70 F TF 70 H TF 70 T 2012 1610 TF 120 F TF 120 H TF 120 T 3525 3020 TF 80 F TF 80 H TF 80 T 2517 2012 TF 140 F TF 140 H TF 140 T 3535 3535 DESCRIPTION SIZE DESCRIPTION POWER DRIVE JAW COUPLINGS & INSERTS SIZE L035 L035 I JAW COUPLINGS RUBBER INSERT L095 L095 I JAW COUPLINGS RUBBER INSERT L050 L050 I JAW COUPLINGS RUBBER INSERT L0100 L0100 I JAW COUPLINGS RUBBER INSERT L070 L070 I JAW COUPLINGS RUBBER INSERT L0110 L0110 I JAW COUPLINGS RUBBER INSERT L075 L075 I JAW COUPLINGS RUBBER INSERT L0150 L0150 I JAW COUPLINGS RUBBER INSERT L090 L090 I JAW COUPLINGS RUBBER INSERT • Prices on request 51 POWER DRIVE BRITISH STANDARD B.S. ROLLER CHAIN CHAIN REFERENCE 06B-1 SIMPLEX 06B-2 DUPLEX 06B-3 TRIPLEX 08B-1 SIMPLEX 08B-2 DUPLEX 08B-3 TRIPLEX 10B-1 SIMPLEX 10B-2 DUPLEX 10B-3 TRIPLEX 12B-1 SIMPLEX 12B-2 DUPLEX 12B-3 TRIPLEX 16B-1 SIMPLEX 16B-2 DUPLEX 16B-3 TRIPLEX 20B-1 SIMPLEX 20B-2 DUPLEX 20B-3 TRIPLEX 24B-1 SIMPLEX 24B-2 DUPLEX 24B-3 TRIPLEX 28B-1 SIMPLEX 28B-2 DUPLEX 28B-3 TRIPLEX 32B-1 SIMPLEX 32B-2 DUPLEX 32B-3 TRIPLEX 40B-1 SIMPLEX 40B-2 DUPLEX 40B-3 TRIPLEX POWERDRIVE chain is manufactured to BS228, ISO R606, DIN 8187 & DIN 8188. With a comprehensive range of Simplex, Duplex and Triplex Britisn Standard and American Standard. Manufactured with hardened pins to prevent wear and stretch and also make it easy to dismantle. POWERDRIVE chain is ideally suited for tough demanding drives in the industrial and agricultural market. ( *Heavy duty American Standard is also available for extra tough conditions). • Prices on request 52 POWER DRIVE AMERICAN STANDARD A.S.A. ROLLER CHAIN CHAIN REFERENCE 40-1 40-2 40-3 SIMPLEX DUPLEX TRIPLEX 50-1 50-2 50-3 SIMPLEX DUPLEX TRIPLEX 60-1 60-2 60-3 SIMPLEX DUPLEX TRIPLEX 60-1H 60-2H SIMPLEX DUPLEX 80-1 80-2 80-3 SIMPLEX DUPLEX TRIPLEX 80-1H SIMPLEX 100-1 100-2 100-3 SIMPLEX DUPLEX TRIPLEX 100-1H SIMPLEX 120-1 120-2 120-3 SIMPLEX DUPLEX TRIPLEX 120-1H SIMPLEX 140-1 140-2 140-3 SIMPLEX DUPLEX TRIPLEX 140-1H SIMPLEX 160-1 160-2 160-3 SIMPLEX DUPLEX TRIPLEX 160-1H SIMPLEX 200-1H SIMPLEX • Prices on request 53 POWER DRIVE SIMPLEX TAPER BUSH SPROCKETS TEETH NO. 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 38 45 57C 76C 95C BUSH SIZE BUSH SIZE 1008 1108 1210 1210 1210 1210 1610 1610 1610 1610 1610 1610 1610 2012 2012 2012 2012 2012 2012 2012 1008 1008 1008 1008 1008 1108 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 BUSH SIZE BUSH SIZE BUSH SIZE 1210 1610 1610 1610 1610 1610 1610 1610 1610 2012 2012 2012 2012 2012 2012 2012 2012 2012 1210 1610 1610 1610 1610 2012 2012 2012 2517 2517 2517 2517 2517 2517 2517 2517 2517 2517 2517 2517 1615 1615 1615 2012 2012 2517 2517 2517 2517 2517 2517 2517 2517 2517 2517 2517 3020 3020 3020 3020 POWER DRIVE DUPLEX TAPER BUSH SPROCKETS TEETH NO. 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 33 38 45C 57C 76C 95C BUSH SIZE 1008 1008 1008 1008 1008 1108 1210 1210 1210 1210 1210 1210 1210 1210 1610 1610 1615 BUSH SIZE 1008 1108 1210 1210 1210 1610 1610 1610 1610 2012 2012 2012 2012 2012 2012 2012 2012 2012 2012 2012 2012 BUSH SIZE BUSH SIZE BUSH SIZE BUSH SIZE 1210 1610 1610 1610 1610 1610 1610 1610 1610 2012 2012 2012 2012 2012 2012 1615 1615 1610 1610 1610 2012 2012 2517 2517 2517 2517 2517 2517 2517 2517 2517 2517 2012 2012 2012 2517 2517 2517 2517 2517 3020 3020 3020 3020 3020 3020 3020 3020 3030 3020 3020 3020 3020 3020 3030 3030 3525 3525 4030 2012 2012 3020 3020 3020 3020 3030 3030 3030 3030 3030 3030 3030 3030 3030 3030 3030 3030 3535 2012 2012 2012 • Prices on request 54 POWER DRIVE TRIPLEX TAPER BUSH SPROCKETS TEETH NO. Size 15, 17, 19, 21, 23, 25, 27, 30, 38, 57 3/8”,1 / 2”,5/8”,3/4”,1” SIMPLEX PILOT BORE SPROCKETS TEETH NO. 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,30, 31, 32, 33, 38, 57, 76, 95, 114 Size 3/8”,1 / 2”,5/8”,3/4”,1”, 1 1/4", 1 1/2” , 1 3/4", 2" CAST IRON : SIMPLEX PILOT BORE SPROCKETS TEETH NO. 38, 45, 57, 76, 95, 114 Size 3/8”,1 / 2”,5/8”,3/4”,1”, 1 1/4", 1 1/2” , 1 3/4", 2" DUPLEX PILOT BORE SPROCKETS TEETH NO. 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,, 20, ,21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 33, 38, 57, 76, 114 Size 3/8”, 1 / 2”, 5/8”, 3/4”, 1”, 1 1/4", 1 1/2” , 1 3/4", 2" CAST IRON : DUPLEX PILOT BORE SPROCKETS TEETH NO. 38, 45, 57, 76, 95, 114 Size 3/8”, 1 / 2”, 5/8”, 3/4”, 1”, 1 1/4", 1 1/2” , 1 3/4", 2" TRIPLEX PILOT BORE SPROCKETS TEETH NO. 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,, 20, ,21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 33, 38, 57, 76, 95, 114 Size 3/8”, 1 / 2”, 5/8”, 3/4”, 1”, 1 1/4", 1 1/2” , 1 3/4", 2" CAST IRON : TRIPLEX PILOT BORE SPROCKETS TEETH NO. 38, 45, 57, 76, 95, 114 Size 3/8”, 1 / 2”, 5/8”, 3/4”, 1”, 1 1/4", 1 1/2” , 1 3/4", 2" • Prices on request 55 POWER DRIVE PLATE WHEELS TEETH NO. 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, ,21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 33, 36, 38, 40,42, 47, 49, 52, 55, 57,60, 62, 65, 68, 70, 73, 76, 80, 95, 114 SIZE 06A, 08A, 10A, 12A, 16A, 20A, 24A, 28A, 32A • Prices on request 56 SPECIAL APPLICATION BELTS Profile Top : PT-0 Profile Top : PT-HC Profile Top : PT-7 Profile Top : 2 TP Profile Top : PT-6 Wrap Banded Belts Cut Edge Banded Belts Vari Speed (Wrapped) Vari Speed (Cogged) Aramid Cord Belts (Wrapped) Aramid Cord Belts (Cut Edge Cogged) • Special application belts : Prices on request 57 STANDARD DESIGNATION FOR POLY/RIBBED V-BELTS Size Designation : Size - 550 J 8 550 J 8 55" J No. of Effective Length, Le Section Ribs PJ 1397 No. of PJ 1397 mm Ribs Section Effective Size - 10 PJ 1397 10 Length, Le STANDARD DESIGNATION FOR BANDED BELTS 4 HSPB 2500 4 No. of Bands HSPB H denotes a Banded Belt 2500 SPB 2500 mm Section Lp 4 H3V 400 4 No. of Bands 4 HC 350 4 No. of Bands HC H denotes a Banded Belt 350 C Section 350” Li 58 H3V H denotes a Banded Belt 400 3V Section 40” La STANDARD DESIGNATION FOR CUT EDGE VARI SPEED BELTS Manufacturing data (BS 3733 : 1974) Cross Sections : Profile HI HJ HK HL Top width 25 32 38 45 Thickness 13 15 18 20 Groove Angle 300 300 300 300 Cross Sections Nomenclature : 14 22 V 450 (Metric System) 14 22 V 450 14/16” Top Width 45” Pitch Length (Lp) Groove Angle 220 Vari Speed HM 51 22 300 • Standard Length Designation - Pitch Length (Lp) in mm Cross Sections Nomenclature : 22 V 1150 A22 (S.I. System) 22 • Apart from the above standard range, the product can be manufactured as per the range given below. However, the details such as top width, thickness, angle or bottom width, length (Li/La/Lp, mm/inches) are required from the customer. V 1150 A22 Groove Angle 220 22 mm Top Width Vari Speed Belt Length (Li) 280 mm - 3175 mm Top width up to 75 mm Thickness 5 mm - 25 mm Angle 22 - 42 (degrees) 1150 mm Effective Length Manufacturing data (ISO 3410 : 1989 (E)) Cross Sections : Profile HG HH HI HJ Top width 16.5 20.4 25.4 31.8 Thickness 8 10 12.7 15.1 Groove Angle 260 260 260 260 HK 38.1 17.5 260 HL 44.5 19.8 260 HM 50.8 22.2 260 HN 57.2 23.9 260 HO 63.5 25.4 260 • Standard Length Designation - Datum Length (Ld) in mm MINIMUM ORDER QUANTITIES HA Belt Reference HB Minimum Quantity 2HA 3HA 4HA 5HA 6HA 8HA 10 HA 12 - 20HA 10 6 5 4 3 2 2 1 2HB 3HB 4HB 5HB 6HB 8HB 10HB 12 - 20HB HSPA Belt Reference 2HSPA 3HSPA 4HSPA 5HSPA 6HSPA 8HSPA 10 HSPA 12 - 20HSPA Belt Reference HC Minimum Quantity Belt Reference 2H3V 3H3V 4H3V 5H3V 6H3V 8H3V 10 H3V 12 - 20H3V Minimum Quantity 2HC 3HC 4HC 5HC 6HC 8HC 10HC 12 - 20HC 10 6 5 4 3 2 2 1 Belt Reference 2HD 3HD 4HD 5HD 6HD 8HD 10HD 12 - 15HD 10 6 5 4 3 2 2 1 HSPB HSPC HE Minimum Quantity 7 5 3 3 2 1 1 1 Belt Reference Minimum Quantity 2HE 3HE 4HE 5HE 6HE 8HE 10HE 12HE 6 4 3 2 1 1 1 1 HSPZ Minimum Quantity Belt Reference Minimum Quantity Belt Reference Minimum Quantity Belt Reference Minimum Quantity 10 6 5 4 3 2 2 1 2HSPB 3HSPB 4HSPB 5HSPB 6HSPB 8HSPB 10HSPB 12 - 20HSPB 10 6 5 4 3 2 2 1 2HSPC 3HSPC 4HSPC 5HSPC 6HSPC 8HSPC 10HSPC 12 - 20HSPC 10 6 5 4 3 2 2 1 2HSPC 3HSPC 4HSPC 5HSPC 6HSPC 8HSPC 10HSPC 12 - 20HSPC 10 6 5 4 3 2 2 1 H3V Belt Reference HD H5V Minimum Quantity 10 6 5 4 3 2 2 1 Belt Reference H8V Minimum Quantity 2H5V 3H5V 4H5V 5H5V 6H5V 8H5V 10H5V 12 - 20H5V 10 6 5 4 3 2 2 1 59 Belt Reference 2H8V 3H8V 4H8V 5H8V 6H8V 8H8V 10H8V 12 - 20H8V Minimum Quantity 10 6 5 4 3 2 2 1 SERVICE EQUIPMENT PIX Length Finder PIX Tension Tester PIX Pulley Gauge PIX Belt Display Stand 60 NOTES 61 CONDITIONS OF SALE PRICES Prices quoted are exclusive of VAT. Goods are sold at prices and conditions in force at time of delivery. All prices quoted are subject to alteration without notice. PAYMENT Terms of payment are 30 days net monthly. The company reserves the right to charge an account maintenance charge of 2% per month from the time of due payment date. All goods supplied by us remain the property of PIX Europe Ltd until full payment is made by the purchaser. DESPATCH All orders are accepted on condition that in the case of extraordinary circumstances, e.g. war, upheavals, fluctuations in the exchange rate or raw materials cost, we are entitled to cancel the order wholly or partly. Due delivery date is conditional on no delays caused by strikes, lockouts or other force majeure. Delay in delivery shall not entitle the buyer to any claim for direct or indirect losses or compensation or to withdraw from purchase of goods ordered. NOTIFICATION OF CLAIMS No claim for goods damaged in transit and no claims regarding shortages will be entertained unless received within seven days of receipt of invoice. RETURN OF GOODS Any goods which have been supplied in accordance with the buyer's order but are subsequently returned will only be credited provided our written agreement has been obtained. The amount credited shall be 25% less than the value at which the goods are invoiced. BUYER'S CONDITIONS Any conditions on the buyer's official order will not be accepted in so far as they are at variance with our terms, unless we have formally accepted them in writing. LAW APPLICABLE The conditions of sale shall have effect in accordance with English law. CORPORATE OFFICE & WORKS PIX TRANSMISSIONS LIMITED J-7, M.I.D.C. Hingna Road Nagpur - 440 016. Maharashtra. India Ph.: + 91 7104 237729, 236501-4 Fax : + 91 7014 236505/6 E-mail : [email protected] Web Site : www.pixtrans.com PIX EUROPE LIMITED Unit 24, Farthing Road Industrial Estate, Sproughton Ipswich, IP1 5AP, United Kingdom Ph.: + 44 1473 744312 Fax : + 44 1473 744613/14 E-mail : [email protected] Web Site : www.pixeuro.com SOUTH AMERICA PIX SOUTH AMERICA LIMITED Rua - Agua Branca, 05065 - 110, Sao Paulo - SP Brasil Ph.: + 55 11 3611 - 9000 Fax : + 55 11 3611 - 3661 E-mail : [email protected] Web Site : www.pixsam.com GERMANY GmbH PIX GERMANY GmbH Nikolaus - Otto-Str. 2 Borchen 33178 Germany Ph.: + 49 5251 878 6003 Fax : + 49 5251 878 6009 E-mail : [email protected] Web Site : www.pixeuro.com
Similar documents
Light Power Drive Design Manual
Dual driving surfaces allow for unique,
problem solving drive designs
0.200'' (1/5'') pitch extra light (XL)
PowerGrip Twin Power Timing Belt
Profile/Pitch