docTrough - Stratco
download 
Report Transcription
Trough - Stratco
TROUGHS Stratco Stainless Steel P.W.D Ablution Trough Ablution Trough Pattern No. 1 Ablution Trough Pattern No. 2 Ablution Trough Pattern No. 3 Inset Ablution Trough Commercial Ablution Trough Hob Mount Trough Inset Photographic Trough Wet Rub Trough Drinking Trough Medical Scrub-up Trough Health Commission Cleaners Floor Trough Cleaners Trough Inset Babies Bath 6 7 8 9 10 11 12 13 14 15 16 17 18 19 STAINLESS STEEL 5 P.W.D ABLUTION TROUGH Features Designed for schools & child care centres, featuring galvanised gallow support brackets & 25 mm radius corners for easy cleaning, refined finish & child safety. A B C D • Custom manufactured • Satin finish • Pipe leg supports available • Tap holes to customer specification • Cavity splash back for plumbing requirements F E G FEATURES SUPPLIED WITH CHROME PLATED PLUG & WASHER H I STANDARD SPECIFICATION • Chrome plated plug and washer • Galvanised gallow support brackets • 25 mm radius corners • Fall 1:80 • 600 mm, 900 mm, 1200 mm, 1500 mm, 1800 mm, 2100 mm & 2400 mm standard lengths A FALL 25 mm RADIUS CORNERS DRAWING CODE A B DIMENSIONS 380 mm 40 mm 6 C 75 mm D 40 mm E • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 F G H I All Standard 25 mm 150 mm 300 mm 120 mm Lengths STAINLESS STEEL MODEL NO: ABTRPWDSS 09/2004 ABLUTION TROUGH PATTERN NO.1 Features Features galvanised gallow support brackets a sturdy design for industrial purposes A B D C FEATURES F E G • Custom manufactured • Satin finish • Pipe leg supports available SUPPLIED WITH P.V.C. PLUG & WASHER STANDARD SPECIFICATION • PVC plug and washer • Galvanised gallow support brackets • Fall 1:80 • 600 mm, 900 mm, 1200 mm, 1500 mm, 1800 mm, 2100 mm & 2400 mm standard lengths H I A FALL • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 NON-RADIUS INTERNAL CORNERS DRAWING CODE A B DIMENSIONS 290 mm 40 mm C D 235 mm 20 mm E F 30 mm 150 mm G H I All Standard 25 mm 110 mm Lengths MODEL NO: ABTRPA1SS 09/2004 STAINLESS STEEL 7 ABLUTION TROUGH PATTERN NO.2 Features A B C E D Features galvanised gallow support brackets a sturdy design for industrial purposes F G FEATURES • Custom manufactured • Satin finish • Pipe leg supports available • Tap holes to customer specification SUPPLIED WITH P.V.C. PLUG & WASHER H STANDARD SPECIFICATION I A FALL • PVC plug and washer • Galvanised gallow support brackets • Anti splash front • 100 mm high splash back • Fall 1:80 • 600 mm, 900 mm, 1200 mm, 1500 mm, 1800 mm, 2100 mm & 2400 mm standard lengths • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 NON-RADIUS INTERNAL CORNERS DRAWING CODE A DIMENSIONS 400 mm 8 B 25 mm C 100 mm D E 12 mm 40 mm F 30 mm G H I 150 mm All Standard Lengths 115 mm STAINLESS STEEL MODEL NO: ABTRPA2SS 09/2004 ABLUTION TROUGH PATTERN NO.3 Features Features galvanised gallow support brackets a sturdy design for industrial purposes A B FEATURES F E C D • Custom manufactured • Satin finish • Pipe leg supports available • Tap holes to customer specification SUPPLIED WITH P.V.C. PLUG & WASHER G STANDARD SPECIFICATION H A FALL • PVC plug and washer • Galvanised gallow support brackets • 150 mm high splash back • Fall 1:80 • 600 mm, 900 mm, 1200 mm, 1500 mm, 1800 mm, 2100 mm & 2400 mm standard lengths • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 NON-RADIUS INTERNAL CORNERS DRAWING CODE DIMENSIONS A 380 mm B 25 mm C 150 mm D 40 mm E 30 mm F G H 150 mm All Standard Lengths 110 mm MODEL NO: ABTRPA3SS 09/2004 STAINLESS STEEL 9 INSET ABLUTION TROUGH Features Features a sturdy inset design for industrial purposes. A C B C L FEATURES • Custom manufactured • Satin finish • Inset clips • Poly propylene or PVC plug and washer RADIUS INTERNAL CORNERS E D F INSET SINK BENCH TOP DRAWING CODE DIMENSIONS 10 INSET CLIP INSET CLIP DETAIL A B C D E F All Standard 404 mm 32 mm 80 mm 150 mm 32 mm Lengths STAINLESS STEEL STANDARD SPECIFICATION • 25 mm radius corners • Fall 1:80 • 600 mm, 900 mm, 1200 mm, 1500 mm, 1800 mm, 2100 mm & 2400 mm standard lengths • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 MODEL NO: ABTRINSSS 09/2004 COMMERCIAL ABLUTION TROUGH Features Designed for schools and public toilets, featuring galvanised gallow support brackets & radius internal corners for easy cleaning A B FEATURES F G E D C • Custom manufactured • Satin finish • Pipe leg supports available • Designed for schools and public amenities SUPPLIED WITH P.V.C. PLUG & WASHER H STANDARD SPECIFICATION I A FALL • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 RADIUS INTERNAL CORNERS DRAWING CODE A B DIMENSIONS 380 mm 14 mm C 40 mm D 20 mm E • PVC plug and washer • Galvanised gallow support brackets • Radius internal corners • Fall 1:80 • 600 mm, 900 mm, 1200 mm, 1500 mm, 1800 mm, 2100 mm & 2400 mm standard lengths F 32 mm 150 mm G H I All Standard 30 mm 120 mm Lengths MODEL NO: ABTRCOMSS 09/2004 STAINLESS STEEL 11 HOB MOUNT TROUGH Features Designed for schools & public toilets, featuring galvanised gallow support brackets & radius internal corners for easy cleaning A C E F D B FEATURES • Custom manufactured • Satin finish • Tap holes to customer specification • Designed for schools and public amenities SUPPLIED WITH P.V.C. PLUG & WASHER G H A J FALL DRAWING CODE A DIMENSIONS 360 B 40 C 90 D 20 E 150 F 30 • PVC plug and washer • Galvanised gallow support brackets • Radius internal corners • Fall 1:80 • 600 mm, 900 mm, 1200 mm, 1500 mm, 1800 mm, 2100 mm & 2400 mm standard lengths • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 RADIUS INTERNAL CORNERS K 12 STANDARD SPECIFICATION I 23 mm DIA. TAP HOLES G H I J K 180 All Standard Lengths 150 230 110 STAINLESS STEEL MODEL NO: ABTRHOBSS 09/2004 INSET PHOTOGRAPHIC TROUGH Features Specifically designed for photographic applications in schools & laboratories 1 OFF Ø 23 mm TAP HOLE A C D C L F C L E B RADIUS INTERNAL CORNERS H 2 OFF Ø 34 mm TAP HOLES I BITUMEN ANTIDRUM COMPOUND K INSET SINK BENCH TOP DIMENSIONS (mm) A B 2000 32 Typ. • Radius internal corners • Poly/propylene plug and washer • Manufactured from 316 #4 stainless steel • 2000 mm standard lengths, optional designs available • Manufactured from 1.2 mm 316 #4 stainless steel sheet complying with AS 1449 INSET CLIP INSET CLIP DETAIL DRAWING CODE • Custom manufactured • Satin finish • Bitumen antidrum compound STANDARD SPECIFICATION J G FEATURES C D E F G H I J K 110 600 150 150 80 47 80 150 15 MODEL NO: PHTRSS 09/2004 STAINLESS STEEL 13 WET RUB TROUGH Features Specifically designed for wet rub applications in schools & industrial factories A B E 2 OFF Ø 23 mm TAP HOLES F G C FEATURES D 1:80 FALL • Custom manufactured • Satin finish • Left or right hand outlet • Hob mount tap landing 5 mm FALL 50 mm POLYPROPYLENE OUTLET 2280 x 250 x 100 mm BOWL DIMENSIONS 2400 (mm) 14 M N O • PVC plug and washer • Radius internal corners • 2400 mm standard lengths available • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 P 18 mm HMR BOARD 3 mm GALVABOND A L K J I H DRAWING CODE STANDARD SPECIFICATION 1.2 mm 304 #4 S/STEEL SATIN FINISH CROSS SECTION B C D E F G H I J K L M N O P 630 60 612 630 60 83 37 44 100 25 20 25 20 42 12 STAINLESS STEEL MODEL NO: WRTRSS 09/2004 DRINKING TROUGH Features Featuring galvanised gallow support brackets & radius internal corners for easy cleaning D E B A • Custom manufactured • Satin finish • Tap holes to customer specification • Extended front flange to accommodate drinking bubblers • Stainless steel fascia to conceal plumbing F C FEATURES SUPPLIED WITH P.V.C. PLUG & WASHER G H STANDARD SPECIFICATION FALL I SHOWN AS 3 PERSON TROUGH • Galvanised gallow support brackets • Radius internal corners • Fall 1:100 • 600 mm, 900 mm, 1200 mm, 1500 mm, 1800 mm, 2100 mm & 2400 mm standard lengths • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 DRAWING CODE A B C DIMENSIONS 277 mm 150 mm 115 mm D 90 mm E F G H I All Standard 15 mm 125 mm 157 mm 406 mm Lengths MODEL NO: DRTRSS 09/2004 STAINLESS STEEL 15 MEDICAL SCRUB-UP TROUGH Features Specifically designed & custom made for medical applications in hospitals, surgeries & clinics E FEATURES J H I BRACKET 32 x 10 mm MS FLAT & 32 x 32 x 3 mm RHS, WITH 2 OFF 11 mm Ø FIXING HOLES. F G D 2.0 mm GALV. BACKING FIXED WITH HORNEX. • Custom manufactured • Satin finish • Tap holes to customer specification • Support brackets • Other designs available SUPPORT LUG MS FLAT BAR 100 x 32 x 10 mm, WELDED TO GALV. BACKING LEVEL WITH OUTSIDE EDGE OF BRACKET SATIN FINISH THIS FACE TROUGH SUPPORT & SIDE COVERS 70 x 50 x 1.6 mm S/STEEL ANGLE. K TAP HOLES TO SUIT CUSTOMER SELECTION A • Radius internal corners • 50 mm chrome plated outlet • 2.0 mm galv back • Trough support and side covers 70 x 50 x 1.6 mm stainless steel • Support lug mild steel flat bar 100 x 32 x 10 mm welded to galv backing • Custom lengths available C B 1.2 mm 304 #4 S/STEEL SATIN FINISH • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 RADIUS INTERNAL CORNERS 50 mm OUTLET C.P BRASS DRAWING CODE A B C D E F G H I J K DIMENSIONS C.L. 200 470 10 830 225 125 82 40 40 140 • C.L. - Custom Lengths 16 STANDARD SPECIFICATION STAINLESS STEEL MODEL NO: SUTRSS 09/2004 HEALTH COMMISSION CLEANERS FLOOR TROUGH Features Designed for hospitals, nursing homes & health clinics to comply with ocupational health & safety regulations A B E H SECTION THRU’ SUPPLIED WITH 50 mm CHROME PLATED BRASS OUTLET E D C CL G B CTR TROUGH I F J F 6 mm Ø FIXING HOLES FEATURES • Custom manufactured • Satin finish • All stainless steel grate • Stainless steel hinging system STANDARD SPECIFICATION GRATE 450 x 400 mm FABRICATED FROM 16 x 16 x 1.6 mm S/STEEL TUBE. HINGED ON 10 mm Ø S/STEEL ROD & SUPPORTED ON 50 x 50 x 6 mm S/STEEL ANGLE. 1.2 mm S/STEEL OPTIONAL BASE SURROUND K L HORNEX DURABOARD 1.2 mm S/STEEL • Chrome plated brass domed outlet • Radius internal corners • Optional stainless steel base surround • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 M LH TROUGH DRAWING CODE A DIMENSIONS 700 (mm) RH TROUGH BASE DETAIL B C D E F G H I J K L M 570 100 100 100 70 50 20 225 12 20 125 50 MODEL NO: CLTRHCSS 09/2004 STAINLESS STEEL 17 CLEANERS TROUGH Features Utilised in hospitals, industrial areas & shopping centres, featuring radius corners for easy cleaning A FEATURES B • Custom manufactured • Satin finish • Strong durable stainless steel hinged grate • Wall brackets or adjustable legs STANDARD SPECIFICATION HINGED GRATE D • PVC plug and washer • Radius internal corners C • Manufactured from 1.2 mm 304 #4 stainless steel sheet complying with AS 1449 SUPPLIED WITH P.V.C. PLUG & WASHER DRAWING CODE A B C D DIMENSIONS 620 mm 470 mm 235 mm 101 mm 18 STAINLESS STEEL MODEL NO: CLTRSS 09/2004 INSET BABIES BATH Features Specifically designed for child care centres & hospitals A B FEATURES • Custom manufactured • Satin finish STANDARD SPECIFICATION • Radius internal corners • Poly/propylene plug and washer C • Manufactured from 1.2 mm 316 #4 stainless steel sheet complying with AS 1449 D SUPPLIED WITH PVC PLUG & WASHER DRAWING CODE A B C D DIMENSIONS (mm) 660 515 200 230 MODEL NO: BABAINSSS 09/2004 STAINLESS STEEL 19