Foot Controls

Transcription

Foot Controls - Rollies Speed Shop

2
Foot Controls
FOOT CONTROLS
2
Forward Controls for Dyna Glide Models
Available in stock or 2"-extended length. Complete kits include
ribbed foot and shifter pegs, mounting plates, control arms and all
hardware. Fit all Dyna Glide models from 91-13.
17635
Stock length kit ��$379.99
17636
2" extended kit, -05 only��$389.99
Black Billet Forward Control Kits
Billet aluminum forward control kits include all mounting hardware
to fit all 4-speed FL, FX and FXWG models from 58-86, and 5-speed
Softail models from 86-99.
683596 Kit with 5/8"-bore master cylinder for use with stock and
single-piston calipers ��$514.99
683597 Kit with 3/4"-bore master cylinder for multi-piston and multiple rear calipers ��$514.99
685358 Repl. rubbers for all kits above��$8.99
688105 Rebuild kit for 46605, 610460 and 610461 ��$22.99
688106 Rebuild kit for 46607 ��$22.99
Note: Custom brake lines are required. Installation on 86 Softail models requires relocation
of the oil filter.
Chrome Billet
Forward Control
Kits
Billet aluminum forward
control kits include all
mounting hardware to
fit all 4-speed FL, FX and
FXWG models from 58-86,
and 5-speed Softail models
from 86-99.
46605
Kit with 5/8"-bore
master cylinder for use with stock and single-piston calipers
��$514.99
46607
685358
688105
688106
Kit with 3/4"-bore master cylinder for multi-piston and multiple rear calipers ��$514.99
Repl. rubbers for all kits above ��$8.99
Rebuild kit for 46605, 610460 and 610461 ��$22.99
Rebuild kit for 46607 ��$22.99
of the oil filter.
2.02
Chrome Billet Forward Control Kits
Billet aluminum forward control kits include brake & shift side
controls, footpegs, and all mounting hardware and feature a 5/8”
bore master cylinder.
610460 Fits all 4-speed FL, FX, and FXWG models from 58-86 and all
Softail models from 86-99 and custom applications��$549.99
610461 Fits all Softail models from 00-13 except Deuce or Rocker
Models��$549.99
688105 Rebuild kit for 46605, 610460 and 610461 ��$22.99
of the oil filter.
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see Cautionary Information in back of catalog.
FOOT CONTROLS
APPAREL
TC Bros. Choppers
SEATS &
BAGS
652964
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Universal Forward Controls by TC Bros
Controls feature CNC Machined aluminum pegs that are knurled
for increased grip. Pegs have 1/2”-13 standard threads for easy
mounting on just about any bike made! Pivot plates are powder
coated black for durability
660911 Universal forward controls �� $129.99
06700
ELECTRICAL
EXHAUST
Custom Forward Control Kits by GMA
INTAKE
GMA controls are CNC-Machined from billet aluminum and then
given a chrome, polished or black anodized finish. The controls
feature adjustable brake and shift levers as well as direct brake
lever actuation to eliminate the flex often found in heim joints. The
brake master cylinder has a 5/8” bore and is not recommended for
multi-caliper applications. Fits all Softail models from 84-99. Made
in the U.S.A.
06700
Chrome FWD control kit ��$529.99
06701
Polished FWD control kit��$379.99
652964 Black anodized FWD control kit��$449.99
TC Bros. Choppers
ENGINE
GASKETS
of the oil filter.
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
640728
CHASSIS
Universal Forward Controls with Mounting Kit
by TC Bros
‘Elite’ Forward Controls by DNA
Billet aluminum forward controls with rubber inserts. Available for all
4-speed Big Twins from 58-86, and Softail models from 86-13.
Elite
640728 Fits all 4-speed Big Twins from 58-84 and all 5-speed Softail
models from 86-99 ��$489.99
640729 Fits all Softail models from 00-13 (except Deuce or Rocker
Models) ��$489.99
SHEETMETAL
This kit includes a pair of universal forward controls and material
to make mounts for them. They can be used to fit virtually any
bike. The mounting plates are 4 x 6 x 5/16” thick raw steel and the
spacers are heavy duty 1/4” wall seamless DOM steel tubing. The
spacers can be cut shorter if desired and the threaded rods can be
cut to length as well. The fitment possibilities are endless. You can
make bolt on mounts or just weld them to your frame. Custom
shapes can be cut for the unique look that you are going for. This is
perfect for custom choppers and bobbers or even stock bikes! Since
this is a universal product, there are no instructions included.
660912 Universal forward controls with mounting kit�� $149.99
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
w w w.cu sto m c h ro m e.co m
2.03
FOOT CONTROLS
2
Chrome Forward Controls
This chrome forward control kit converts mid-shift FX or FL models with floorboards to the clean smooth lines of late Softail models. Constructed
of heavy-gauge steel, both the brake and shift sides are chrome-plated and come complete with footpegs and mounting hardware. Master
cylinder sold separately.
Fits 4-speed models 70-86 and softail models 86-99
130348 Includes shift and brake assemblies �� $266.99
Note: FX models must re-use existing Original Equipment shift rod end.
Chrome Forward Control Kits for Big Twin Models
These affordable kits include O-ring footpegs and toe pegs, and chrome master cylinders. The brake pedals and shift levers ride on bronze
bushings giving smoother pedal action. The footpeg supports have female clevis’ that will accept most aftermarket footpegs. Kits include
installation instructions, a universal nylon brake line kit, mounting hardware and a selection of shifter rods. Fit all 4-speed FL, FX models from
58-86 (except 4-speed Softail models), and 5-speed Softail models from 86-99.
17565
Kit with 3/4"-bore master cylinder for use with after market calipers, for four speed models to 86 and Softails to 86-99 �� $432.99
17586
Kit with 5/8"-bore master cylinder for use with stock calipers�� $399.99
Note: Some late model FXs were manufactured without a mounting tab on the right end of the lower engine mount crossmember. These motorcycles require the additional purchase of a CC
#17503 Weld-on Frame Tab which is sold separately.
2.04
FOOT CONTROLS
APPAREL
17553
SEATS &
BAGS
FOOT
CONTROLS
17554
HAND
CONTROLS
LIGHTING
OEM-Style Forward Control Kits
Forward Shifter Kit
This original style replacement forward control set
features a heavy duty mounting bracket and comes
complete with ratchet top dust cover and arm. Fits FL
models from 52-E79 and FX models from 71-73. Can also
be used as a forward shift conversion kit on FX models
from 74-E79 however, it will reverse the shift pattern.
Works with floorboards or footpegs.
060028 Forward shifter kit��$109.99
Chrome-plated kits for OEM style floorboards or 3/8" stud mount custom footpegs. The shifter kit has a splined shift lever and arm, shift peg, braced shifter
backing plate, FL and FX shifter rods, and mounting hardware. The brake kits
are available with or without master cylinder, and include a backing plate,
brake pedal, brake pedal stop, return spring, plunger, and mounting hardware.
Forward Shifter Kit
17553
For 4-speed Big Twins 52-85 �� $109.99
ELECTRICAL
EXHAUST
Forward Brake Kits with Master Cylinder
17554
For 4-speed Big Twins 70-E79�� $149.99
Forward Brake Kits without Master Cylinder
17555
For 4-speed Big Twins 70-E79�� $86.99
17557
For 4-speed Big Twins 58-69 �� $92.99
INTAKE
ENGINE
GASKETS
Available in black
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
Forward Control Sets
Forward controls sold in complete sets or individually
by side.
Complete Sets
78331
For FL models from 58-85 and 71-73 FX models
(hydraulic rear brake only requires longer hose)
��$149.99
Brake Side Only
78333
For FL/FX models from 36-78 (hydraulic rear brake
only – requires longer brake hose) ��$86.99
78334
For Sportster models from 75-78 (left-side cableoperated brake)��$85.99
78336
For Sportster models from 79-85 (requires longer
brake hose)��$93.99
Shift Side Only
78338
For Sportster models from 54-74 (right-side shift)
CHASSIS
Forward Control Kits for Sportster Models
Add that stretched-out look and extend your riding position on your Sportster.
These controls feature integrated shift lever and brake lever on the footpeg
shaft. Kits includes footpegs, instructions, and mounting hardware. Available in
chrome or black finish and in a 2“ extended version.
610470 Fits all Sportster models from 04-Up�� $469.99
610471 Forward control kit, black XL 04-Up�� $369.99
610472 Forward control kit +2“, chrome XL 04-Up�� $424.99
610473 Forward control kit +2“, black XL 04-Up�� $424.99
INSTRUMENTS
& GAUGES
GENERAL
��$85.99
78340
SHEETMETAL
For Sportster models from 77-85 (left-side shift)
��$97.99
* Requires relocation of horn on some models.
CROSS
REFERENCE
2.05
FOOT CONTROLS
2
Forward Control Kits for Evolution Sportster
Models
Chrome Forward Control Kits for Late Sportster
Models
Features integrated shift lever and brake lever on the footpeg shaft.
Similar to the stock style forward controls found on Sportster models
from 98-03 that are equipped with OEM style forward controls. Fits
5-speed Sportster models from 91-03. All chrome hardware and
instructions included (footpegs not included)
17546
Replaces OEMs 33891-98, 33892-98 ��$314.99
Available in two different versions to fit all models from 86-03. Each
kit includes all the necessary brackets, pedals, linkage, O-ring pegs,
hardware and detailed instruction sheet to convert both brake and
shifter to forward-mount style.
17551
Fits all Evolution Sportster models with 4-speed transmissions
from 86-90��$319.99
17545
Fits all Evolution Sportster models with 5-speed transmissions
from 91-03��$319.99
Note: CC #17545 will not fit with Original Equipment highway bars.
17549
17530
17537
Replacement brake pedal for CC #17551��$54.99
Replacement shift lever for CC #17551 ��$13.49
Replacement brake pedal for EVO XL CC #17551��$33.99
Forward Control Set for FXR Models
An easy-to-install, American-engineered forward control assembly for all of the 5-speed FXR models from 82-94 whether Shovelhead or
Evolution-powered. Simple installation does not require the primary cover to be removed. All parts are show-chromed. A chrome cap for the
thru-the-case shifter, and a complete hardware set are included.
17550
Complete kit, includes brake and shifter control�� $279.99
17510
Brake Pedal only �� $44.99
2.06
FOOT CONTROLS
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
060025
LIGHTING
ELECTRICAL
EXHAUST
130425
INTAKE
ENGINE
Forward Control Sets for Sportster Models
Available for mechanical or disc brake models these forward control
units provide a more comfortable riding position. Includes rubber
footpegs with chrome end caps.
Complete Kits
Sets include both shift and brake controls.
060170 Fits Sportster models from 75-76��$179.99
060172 Fits Sportster models from 77-78*��$179.99
060173 Fits Sportster models from 79-81*��$179.99
Brake Controls ONLY
Available for mechanical disc brakes. Kits for hydraulic disc are
designed to work with Wagner or Kelsey-Hayes style 1-piece master
cylinders.
130425 Fits Sportster models from 75-78. Mechanical cable operated
linkage. Right side brake��$89.99
Note: Kit requires extended brake line (not included)
Shift Controls ONLY
060025 Fits Sportster models from 75-78. Left side shift ��$93.99
GASKETS
Floorboard Forward Controls for Softail Models
Chrome shifter and brake side controls with floorboards. Includes
chrome-plated mounting brackets, floorboards, brake pedal and
heel/toe shift levers, and chrome master cylinder with cover. Use
as a chrome replacement for FL Softail models, or swap from pegs
to floorboards on FX Softail models, or add forward control floorboards to scratch-built machines. Fits all Softail models from 87-99.
22080
Complete chrome floorboard kit�� $519.99
688710 Replacement master cylinder for CC # 22080�� $139.99
688711 Rebuild kit for master cylinder CC # 22080�� $44.99
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
Note: 86 and earlier models require brake line modifications and relocation of the oil filter.
*Note: Kit requires modification to stock shift arm. Most installations will require longer
motor mount bolts.
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
2.07
FOOT CONTROLS
2
Ness-Tech Forward Control Extensions for 00-13
Softail Models
Relocates the Original Equipment foot controls 3"-forward to
increase legroom. Includes a pair of black anodized billet aluminum
adaptor plates, extended stainless steel rear brake line, extended
shifter rod, pin, and mounting hardware.
05806
Fits FX Softail models from 00-06 ��$199.99
631148 Fits FX Softails from 07-13��$199.99
Reduced Reach Conversion Kit for XL Forward
Controls
This new conversion kit repositions the original equipment foot pegs
& foot controls up & back by 2“ and positions the controls closer
to the rider for added comfort & confidence. It provides additional
leg clearance around the chassis and air cleaner, by moving the foot
pegs outward 1.5“ (LHS) & 0.5“ (RHS). The reduced reach places the
riders boot at the proper pivot point for improved leverage while
maintaining the foot-forward riding profile. The kit comes with
heavy duty steel mounts and shortened brake rod, reuses original
equipment control supports and brake/shift levers or custom lever
styles. Fits 04-Up XL models equipped with forward controls, available
in chrome or black finish.
688210 Reduced reach conversion kit black ��$139.99
688211 Reduced reach conversion kit chrome ��$139.99
3" Forward Control Extensions for Softail Models
• Moves the stock foot controls 3" forward to increase legroom
• Kits include a pair of extension plates, extended shift rod, and all
necessary mounting hardware
• Available with a chrome finish
• Fits all FX Softail models from 00-13
• Sold in sets
648964Chrome��$119.99
Note: Installation of these extension plates will require longer brake line to be installed.
2.08
FOOT CONTROLS
APPAREL
654133
SEATS &
BAGS
654136
FOOT
CONTROLS
654132
HAND
CONTROLS
654137
654134
LIGHTING
654135
ELECTRICAL
Deep Cut Solo Shift & Brake Arms by Arlen Ness
• Machined billet aluminum construction
• Include Deep Cut billet shift peg, and are available in chrome or
black anodize finish.
• Matching floorboards, covers, and many more matching
accessories are available
• Made in the U.S.A.
Brake Arm
Standard Length
654174 Brake arm, Deep Cut 2014 FLT, chrome�� $249.99
654175 Brake arm, Deep Cut 2014 FLT, black �� $249.99
654138 Brake arm, deep cut chrome FLT 08-13 �� $249.99
654139 Brake arm, deep cut black FLT 08-13 �� $249.99
654136 Brake arm, deep cut chrome FLT 97-07 �� $249.99
654137 Brake arm, deep cut black FLT 97-07 �� $249.99
-1 Shortened Length
654178 Short Brake arm 08-13 FLT, chrome�� $249.99
654179 Short Brake arm 08-13 FLT, black�� $249.99
Solo Shift Lever
654132 Solo shift lever, deep cut chrome FLT 84-Up�� $169.95
654133 Solo shift lever, deep cut black FLT 84-Up�� $169.95
Inner Shift Lever
654134 Inner shift arm, deep cut chrome FLT 84-Up�� $99.95
654135 Inner shift arm, deep cut black FLT 84-Up�� $99.95
EXHAUST
INTAKE
ENGINE
GASKETS
Retro Design
TRANSMISSION
& CLUTCH
Black Deep
Cuts
DRIVELINE
WHEELS
TIRES &
BRAKES
Chrome Deep
Cuts
CHASSIS
Arlen Ness Heel-Toe and Brake Arm Kits for Touring models
The ultimate floorboard control kits from Arlen Ness
• Each design is carved from billet aluminum and then either chrome-plated or black
anodized
• Each kit includes a brake arm with peg and a heel/toe shifter set with pegs
• Choose from Deep Cut or Retro styling
• Fits 97-13 FLT & 00-Up FLST
Deep Cut Design
631523 Deep Cut design for 08-13 Touring models, chrome��$499.99
631524 Deep Cut design for 08-13 Touring models, Black��$499.99
631526 Deep Cut design for 97-07 Touring & 00-13 FLST models, chrome ��$499.99
631527 Deep Cut design for 97-07 Touring & 00-Up FLST models, Black��$499.99
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
Retro Design
631525 Retro design for 08-13 Touring models, chrome��$469.99
631528 Retro design for 97-07 Touring & 00-Up FLST models, chrome ��$469.99
CROSS
REFERENCE
2.09
FOOT CONTROLS
12454
12452
12467
2
26192
12455
12449
12456
Chrome Shift Levers
12452
12467
12456
12454
26193
12449
26192
12455
12451
26193
12451
Fits all FXR models from 82-94 (repl. OEM 34599-81T)�� $14.99
Fits FL models from 74-84, and FXWG models from 80-86 with splines (repl. OEM 34606-74)�� $13.99
Fits all FL models from 65-84 with splined shafts (repl. OEM 34692-74TA)�� $36.99
Fits all FX models 74-85 with thru-the-case shifters, and all Softail models (except FL Softail models) from 86-89(repl. OEM 34564-74TA)�� $16.99
Fits all 5-speed Evolution Sportster models from 91-03 (repl. OEM 34606-90T)�� $16.99
Fits Evolution Sportster models from 86-90 (repl. OEM 34605-86TB)�� $16.99
Fits Sportster models from 77-85 (repl. OEM 34606-75T)�� $14.99
Fits Sportster models from 55-74, and early Big Twin models without splined shafts (repl. OEMs 34606-54TA, 34606-71) �� $18.99
Polished shift lever for Sportster models from 75-76 (repl. OEM 34666-75)�� $29.99
Vulcan Engineering FXR & Dyna Glide Shifter
Sleeve
Machined from 7075 aluminum to replace the OEM plastic shifter
sleeve which leaks. This is the part that Harley recommends in their
service bulletin. Includes o-rings.
668163 Fits FXR models from 84-94 and Dyna Glide models from
91-05 (except Dyna Wide Glide models). (repl. OEM 3463284) �� $33.99
Jockey Shift Conversion Kit
This kit converts foot shift and hand clutch to Jockey Shift with footoperated clutch. Fits all 4-speed Big Twins with wrap-around oil tanks
ONLY through early 79 as well as custom applications. The shift lever
is also sold separately.
19507
Complete jockey shift conversion kit ��$74.99
19506
Jockey shift lever only (3/8”- 24 thread)��$19.99
Available in black
Shifter Shaft Cap
Slotted Shift Lever for Sportsters
Replace that dull looking shift lever with this stylish new slotted lever.
Available in chrome or black finish. Sold each.
642712 Shift lever, chrome fits 91-03 XL models ��$38.99
642713 Shift lever, black fits 91-03 XL models ��$38.99
2.10
Use this chrome plated cap to cover the shifter shaft when installing
forward controls. The cap is held in place with a flush mount sockethead screw. Fits FX, FXR and Dyna Glide models with mid-shift, and
wrench is included.
060188 Sold each��$9.99
FOOT CONTROLS
APPAREL
28039
SEATS &
BAGS
12465
Chrome Shifter Shafts
Chrome-plated shifter shafts to
replace the stock parts on Big
Twins.
FOOT
CONTROLS
Chrome Shifter Covers
Chromed replacement shifter covers.
060060 Fits FL models 65-84. Replaces OEM 33644-65 �� $12.99
060068 Fits FXSTC, FLSTF, FLST models 89-99. Replaces OEM 3364289�� $21.99
Fits all 4-speed FL models from
70-83 with splined shafts
12465
Replaces OEM 3366074A ��$17.99
Fits 5-speed FXR models with
diaphragm clutch from late
84-94
28039
Replaces OEM 34621-84��$27.99
HAND
CONTROLS
LIGHTING
Fits FXWG and FX Softail models from late 85-89. Also popular when
removing heel/toe shifters on Fat Boy and Heritage Softail models.
Splined shaft shoulder bolt type
060069 Replaces OEM 33660-85��$16.99
ELECTRICAL
Fits FL Softail models from 90-06.
060908 Replaces OEM 33668-90B��$24.99
EXHAUST
INTAKE
Shift Lever Brackets
Made from heavy-gauge steel with added support plates in the peg
mount area for superior strength and styling. Does not crack like
the Original Equipment item or other aftermarket parts. Beautifully
polished and chrome-plated, and complete with bushing and zerk
fitting installed, ready for use.
28033
Fits 4-speed FL models from 70-84 (repl. OEM 33630-70)
ENGINE
GASKETS
�� $37.99
060141
Fits FL Softail models from 90-99 (repl. OEM 33630-90A)
�� $46.99
Chrome Shifter Support Bracket
This custom shifter bracket fits 4-speed FL models from 52-84. Also
may be used as a forward control bracket on 4-speed FX models from
71-85.
060018 Replaces OEM 33630-52��$45.99
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
2.11
FOOT CONTROLS
2
Brake Arm Clevis Pin
Late Hydraulic Brake Lever
Plate
Fits FL models from 73-E79.
19536
Replaces OEMs 42480-73, 42401-73A
Replacement brake arm clevis pin for 70-81
FL models. Zinc finish, sold each.
688721 Brake arm clevis pin 70-81 FL models
��$1.99
��$32.99
15911
Hydraulic Brake Pedal for FL
Models
Chrome Hydraulic Brake Pedal
A chrome-plated pedal for FL models from
73-E79.
28006
Replaces OEM 42402-73A ��$36.99
Fit FL models from late 59-69
15911
Brake pedal (repl. OEM 42402-59)
��$39.99
Brake Pedal Return Spring
Chrome-plated return spring with rubbercoated ends to prevent scratching. Fits all FX
models from late 72-E79.
17578
Replaces OEM 42425-71��$4.99
Suicide Clutch Pedals
Here’s an “old school” part for ya! Early style
suicide clutch pedal with backing plate for
74” B/Twins with jockey shift set-ups. Great
item for custom retro bike builds. Made in
USA by Paughco.
632267 Suicide clutch pedal ��$60.99
Brake/Master Cylinder Springs
Brake shoe return springs. Fits all Sportster
mechanical brakes and 49-71 Big Twin front
brakes only.
19516
Replaces OEM 41835-69) (Sold in
pairs)��$5.49
Chrome hydraulic brake pedal return spring.
Fits 58-84 4-speed Big Twins.
19316
Replaces OEMs 41835-69, 42427-58)
(sold each)��$3.99
2.12
Hydraulic Brake Stop
Fits the master cylinder on 4-speed FL models from 70-E79 and FX models from 71-E72.
19537
Replaces OEM 42411-70T��$8.99
FOOT CONTROLS
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
MX Style Pegs by Burly
These aggressive MX style serrated pegs offer a perfect no slip grip! Constructed from steel
with a matte black finish, 2-pc design makes them easy to adjust the angle for the perfect
foot positioning. If that isn’t enough they Burly team even built a bottle opener into them!
Fits all standard male mount applications, sold in pairs.
690102 MX Style pegs, Pair ��$125.95
HAND
CONTROLS
LIGHTING
ELECTRICAL
604992
604977
604989
EXHAUST
INTAKE
604990
604978
604993
ENGINE
Tornado Billet & Rubber Foot Pegs
CNC-Machined from billet aluminum and covered with a knurled black rubber. Available in
either a chrome-plated, black anodized or bronze finish.
Foot Pegs (sold in pairs)
604993 Chrome, Tornado Foot Pegs �� $69.99
604990 Black, Tornado Foot Pegs�� $69.99
604978 Bronze, Tornado Foot Pegs�� $69.99
Shift Pegs (sold each)
604992 Chrome, Tornado Shift Peg�� $18.99
604989 Black, Tornado Shift Peg �� $18.99
604977 Bronze, Tornado Shift Peg�� $18.99
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
604987
604984
604985
604982
604986
CHASSIS
604983
SHEETMETAL
Stroker Billet Foot Pegs
CNC-Machined from billet aluminum with a knurled finish for a non-slip grip. Available in
either a chrome-plated, black anodized or bronze finish.
Foot Pegs (sold in pairs)
604984 Chrome, Stroker Foot Pegs�� $69.99
604983 Black, Stroker Foot Pegs�� $69.99
604982 Bronze, Stroker Foot Pegs�� $69.99
Shift Pegs (sold each)
604987 Chrome, Stroker Shift Peg�� $19.99
604986 Black, Stroker Shift Peg �� $19.99
604985 Bronze, Stroker Shift Peg�� $19.99
2.13
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
FOOT CONTROLS
610734
610727
610726
2
610735
610736
610737
610729
610728
610739
610738
610731
610730
610741
610740
610733
610732
610378
610376
610374
610372
610379
610377
610373
610375
Custom Rubber & Billet Foot Pegs by
Avon Performance
Avon pegs are constructed from a durable rubber
compound and are finished with billet end caps in
either a chrome or black anodized finish. These pegs
will fit all standard male mount clevises. Proudly made
In the U.S.A.
Footpegs (Sold in pairs)
610372 Chrome Contour Design �� $79.99
610374 Black Anodized Contour Design �� $79.99
610373 Chrome Billet Spike Design�� $89.99
610375 Black Anodized Billet Spike Design�� $89.99
610726 Tribal Spike, Chrome�� $99.99
610727 Tribal Spike, Black �� $99.99
610728 Air Cushion, Chrome�� $99.99
610729 Air Cushion, Black �� $99.99
610730 Velvet Air Cushion, Chrome �� $99.99
610731 Velvet Air Cushion, Black�� $99.99
610732 Big Bike Flame, Chrome�� $89.99
610733 Big Bike Flame, Black �� $89.99
2.14
Shift/Brake Pegs (Sold each)
610376 Chrome Contour Design �� $33.99
610378 Black Anodized Contour Design �� $29.99
610377 Chrome Billet Spike Design�� $32.99
610379 Black Anodized Billet Spike Design�� $32.99
610734 Tribal Spike, Chrome�� $36.99
610735 Tribal Spike, Black �� $36.99
610736 Air Cushion, Chrome�� $36.99
610737 Air Cushion, Black �� $36.99
610738 Velvet Air Cushion, Chrome �� $36.99
610739 Velvet Air Cushion, Black�� $36.99
610740 Big Bike Flame, Chrome�� $33.99
610741 Big Bike Flame, Black �� $33.99
FOOT CONTROLS
APPAREL
SEATS &
BAGS
654010
631217
654011
688832
688833
FOOT
CONTROLS
688834
631215
HAND
CONTROLS
688835
688828
LIGHTING
631216
654012
654013
631218
Soft-Touch Footpegs by Arlen Ness
The ultimate in comfort and style for the rider. Knurled rubber center
provides an excellent gripping surface plus vibration dampening. Foot
pegs are machined from aluminum to provide strength and durability.
Shifter/brake pegs have been given extra length to provide a larger
contact area for riders wearing boots. The ends of the footpegs and
shifter pegs feature the Ness Scalloped design. Available in chrome or
black anodize. Matching Soft-Touch grips also available.
Footpegs
631215Chrome��$79.99
631216Black��$79.99
654010 Dimpled with smooth end cap, chrome��$89.99
654012 Dimpled with smooth end cap, black��$89.99
Shift/Brake pegs
631217Chrome��$29.99
631218Black��$29.99
654011 Dimpled with smooth end cap, chrome��$29.99
654013 Dimpled with smooth end cap, black��$29.99
ELECTRICAL
EXHAUST
688829
INTAKE
ENGINE
688830
GASKETS
TRANSMISSION
& CLUTCH
654108
654109
DRIVELINE
688831
WHEELS
TIRES &
BRAKES
Panorama Custom Footpegs and Shiftpegs
654110
654111
Beveled Fusion Footpegs by Arlen Ness
• Designed to match the Fusion line of grips
• The perfect fusion of traction, style, and comfort
• Each foot & shift peg features intricate machining for a great
look
• Available in chrome or black anodize finish
654108 Beveled Fusion footpegs chrome��$89.95
654109 Beveled Fusion footpegs black��$89.95
654110 Beveled Fusion shift/brake peg chrome��$29.95
654111 Beveled Fusion shift/brake peg black��$29.95
These Panorama footpeg sets are precision CNC made from 6061-T6
billet aluminum and add a great look to any motorcycle. Available
in a beautiful chrome, black, matt black or bronze finish. All items
include our durable soft-touch non-slip rubber and are easy to
install. Shift pegs available separately. Matching pegs are in the
hand controls section.
Footpegs
688828 Panorama footpegs chrome�� $71.99
688829 Panorama footpegs matt black�� $71.99
688830 Panorama footpegs gloss black�� $71.99
688831 Panorama footpegs bronze �� $71.99
Shiftpegs
688832 Panorama shiftpeg chrome�� $20.99
688833 Panorama shiftpeg matt black�� $20.99
688834 Panorama shiftpeg gloss black�� $20.99
688835 Panorama shiftpeg bronze�� $20.99
2.15
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
FOOT CONTROLS
19953
12934
12933
12945
19955
2
19958
19638
12928
18827
12931
Custom Chrome O-Ring Pegs
Kick Pedal and Shifter Pegs (sold each)
19953
Flat O-ring kicker pedal��$21.99
19955
Round O-ring toe peg (repl. OEM 34631-84T) ��$7.99
Custom Pegs (Sold in pairs)
12928
3/8"-24 stud mount��$22.99
18827
1/2"-20 stud mount��$24.99
19638
Clamp-on 7/8”-1”��$27.99
190034 Fits 5/8" square bars used in most after market highway bars
�� $19.99
Note: When used as highway pegs, these footpegs should not be used under normal stopand-go operating conditions.
Passenger Pegs (Sold in pairs)
Fit most models from 71-Up
12933
Standard length pegs (repl. OEM 50901-84T)��$22.99
12945
Extended length pegs (1"-longer than stock) ��$29.99
Driver Pegs (Sold in pairs)
Fit Sportster models from 54-90 and FX models from 71-85
12931
Fit FXR models (except FXRD and FXRP) from 82-94 and Sportster and
Dyna Glide models from 91-Up (except Dyna Wide Glide models)
12934
Replacement O-Ring Sets
Contains enough O-rings for one footpeg.
19956
Fits CC #19953 flat kick pedal, and #12931 or #12934 driver
pegs, Replacement O-rings (pack of 10) ��$2.99
19957
Fits CC #19955 (repl. OEM 49030-84T) ��$2.99
19958
For CC #12933 pegs or stud mount and clamp-on custom pegs
(pack of 12)��$3.99
610462
610463
Oval Ribbed Footpeg
Chrome & Rubber ‘Gladiator’ Billet Footpegs
Large oval-shaped footpegs provide a more comfortable footrest, and
add a nice visual accent. Sold in pairs.
46020
Male mount ��$45.99
These chrome and rubber billet footpegs are a perfect match to our
billet controls part #610460 & 610461. They include chrome mounts that
are available with either a 3/8” or 1/2” mounting hole. Sold as a pair.
610462 With 1/2” mounting hole �� $119.99
610464 With 3/8” mounting hole �� $119.99
Optional Matching Shift/Brake Pegs
610463 Sold as a pair�� $39.99
2.16
FOOT CONTROLS
APPAREL
18970
18968
18969
SEATS &
BAGS
18964
18960
FOOT
CONTROLS
651804
651801
HAND
CONTROLS
18971
LIGHTING
18962
18974
ELECTRICAL
651803
651802
Vibra-Kushion Footpegs
EXHAUST
These state-of-the-art chrome-plated footpegs have an innovative design which provides custom styling and superior comfort. Other features
of these pegs include replaceable hollow-core wear-resistant rubber insert cleats and interchangeable steel mounting clevis’. Fit most early and
late-model bikes.
Vibra-Kushion Footpegs (Sold in pairs)
18960
Chrome Small, male mount��$34.99
651803 Black Small, male mount��$31.99
18962
Chrome Large, male mount ��$39.99
651802 Black Large, male mount��$37.99
190130 Chrome Clamp on pegs. Fits 1" and 1 1/4" frame or engine guard tubing ��$35.99
190042 Stud mount 1/2"- 20��$39.99
Shifter Pegs and Kicker Pedal (sold each)
18964
Chrome Standard length toe peg�� $9.99
651804 Black Standard length toe peg�� $7.49
18974
Chrome Extended toe peg (3 1/2"-long) ��$12.99
651801 Black Extended toe peg (3 1/2” long)��$10.99
Replacement Parts
18968
Mount, male (Sold in pairs)��$13.99
18969
Rubbers (small footpeg) set of 8 �� $4.99
18970
Rubbers (large footpeg) set of 8 �� $4.99
18971
Rubbers (shifter toe peg) set of 3 �� $3.99
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
Note: None of these footpegs or replacement parts are interchangeable with their ‘KüryAkyn Iso-Peg’ counterparts.
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
18973
INSTRUMENTS
& GAUGES
651800
Vibra-Kushion Footpeg Stirrups
Get more comfort without adding floorboards. These stirrups use our Vibra-Kushion footpegs, and are adjustable so that you get the right
amount of heel support. Include male clevis’ that fit large or small-diameter Vibra-Kushion footpegs.
18973
Chrome, Pair��$55.99
651800 Black, Pair ��$49.99
2.17
GENERAL
CROSS
REFERENCE
FOOT CONTROLS
46015
46013
12174
2
12987
12979
46011
Extended Pegs for Forward Controls
Chrome and Ribbed Rubber Pegs
Mount to the Original Equipment or aftermarket
footpeg clevis’ on most models. The perfect match to our
CC #12900 Handlebar Grips.
46011
Large, male mount (Sold in pairs)��$37.99
46013
Small, male mount (Sold in pairs) ��$32.99
46015
Shifter toe peg (sold each) ��$10.99
Longer than the stock pegs by over an inch for additional comfort when air
cleaner, or tanks have made pegs difficult to use. Use as passenger pegs to help
clear Shotguns or other custom exhaust equipment. Sold in pairs.
12979
Original Equipment-style��$19.99
12987
Chrome end cap style��$20.99
12988
Black replacement rubbers��$7.99
Replacement Parts
12174
12974
12290
46106
46104
Rubber Footpegs with Chrome Ends
12174
Die-cast footpegs with rubber sleeves and chrome ends. Fit a variety of
applications including aftermarket highway peg sets.
12990
Passenger pegs (Sold in pairs)��$24.99
12974
Black rubber toe peg with chrome end cap and short stud (sold each)��$7.99
46102
Chrome Spur Pegs
footpeg clevis’ on most models. Perfectly match our CC
#12169 Handlebar Grips.
46102
Large, male mount (Sold in pairs)��$36.99
46104
46106
190002
12244
Replacement Parts
12174
25193
Replacement countersunk bolt (pack of 10)� $17.99
Stock Replacement Large Diameter Footpegs
Steel peg set with rubber covers. Fits FL models from 41-84, FX models from
71-85 (except FXST and FXWG models), and Sportster and K models from 54-99.
Sold in pairs.
190002 Footpeg set (replaces OEM 50939-52) ��$19.99
12244
Replacement rubbers (replaces OEM 50940-52T) sold in pairs��$3.99
46110
46112
Chrome and Rubber Band Pegs
footpeg clevis’ on most models. Perfectly match our CC
#’s 12165 and 12166 Handlebar Grips.
46110
46112
Replacement Parts
18968
2.18
FOOT CONTROLS
APPAREL
SEATS &
BAGS
Chrome Billet Footpeg Peg Mounts
FOOT
CONTROLS
688636
• CNC-Machined from 6061-T6 billet aluminum
• 3” long with a 1 1/4” diameter clamping area fit most engine
guards and any 1 1/4” dia. tubing
• Mounting hardware included
• Sold in pairs
604304 Chrome billet peg mounts �� $97.99
HAND
CONTROLS
LIGHTING
18888
ELECTRICAL
688637
EXHAUST
18887
INTAKE
18889
Passenger Peg Mounts for Dynas
Clamp-On Footpeg Sets
1 1/4" clamp-on footpeg kits with three different styles of footpegs
come complete with three-piece chrome frame clamps. They will fit
all Sportster frames from 82-Up and all 5-speed rubbermount frames.
18887
With O-ring pegs��$52.99
18888
With rubber cushion pegs��$69.99
18889
With rubber pegs��$49.99
These chrome or wrinkle black passenger peg mounts bolt to the
stock location on 06-Up Dynas. They accept any male mount style
footpegs (sold separately).
688636 Passenger peg mounts chrome �� $99.99
688637 Passenger peg mounts wrinkle black�� $93.99
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
190044
DRIVELINE
26367
19955
WHEELS
TIRES &
BRAKES
26431
12345
26366
CHASSIS
12974
12346
190042
Passenger Pegs for FX Models
Replacement peg sets with chrome ends (replaces OEM 50907-69A).
26431
Rubber peg set (Sold in pairs)��$28.99
190042 Stud mount 1/2"- 20��$39.99
190044 Chrome O-ring peg set��$33.99
Chrome Rear Footrest Bracket Sets
Replacements for the rear brackets on 4-speed FX models thru 81,
or can be used to replace the 82-10 one-piece welded and stamped
rear footrest brackets, and the large aluminum rear brackets fitted to
4-speed FL models from 77-84.
26366
Left and right brackets alone (1/4" steel plate)��$19.99
26367
Bracket set (includes supports and mounting hardware) ��$34.99
SHEETMETAL
Shifter Toe Pegs
Wide selection of toe pegs in the market from stock to custom.
Sold each.
12974
Black rubber toe peg with chrome end cap and short stud
(sold each)�� $7.99
12345
Stock replacement black rubber toe peg with short stud
(repl. OEM 34611-65T)�� $2.99
12346
Stock replacement black rubber toe peg with long stud (repl.
OEM 34609-52T)�� $4.99
19955
Round O-ring toe peg (repl. OEM 34631-84T) �� $7.99
Replacement O-Rings
19957
Fits CC #19955 (repl. OEM 49030-84T) �� $2.99
2.19
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
FOOT CONTROLS
2
Ness 1 1/4" Clamp-On Peg Mount for Highway
Bars
• Chrome-plated, die-cast design
• Accepts male mount footpegs
648305 Footpeg Clamp Mount - Sold in pairs��$49.99
Chrome Clamp-On Peg Mounts for Highway Bars
1 1/4“
These chrome plated mounts are perfect for use on highway bars and
will work with any male mount peg.
652019 Clamp on peg mount chrome, Sold in pairs ��$56.99
652014 Clamp on peg mount black, Sold in pairs ��$59.99
Adjustable Footpeg Kit for Models with Forward
Controls
Fits into the female footpeg clevis’ on models with forward controls.
Pegs may be rotated in a 360° arc. Kit includes everything necessary
to make the conversion (except footpegs) and features flawless
chrome-plating on the individual components.
09890
Fits Dyna Wide Glide, FX Softail and 4-speed FXWG models
83-Up ��$89.99
Note: Passenger footpegs are not included in the kit.
Chrome Adjustable Highway Peg Mounts for
Sportster Models
Offset Chrome Footpeg Extensions
Provide long-legged riders with an inexpensive method of stretching
out their legs without moving their controls. They move the footpegs
out 3 1/2" from the centerline of the motorcycle and 2" forward. Fits
FX Softail, Dyna Wide Glide and 4-speed FXWG models from 80-Up
19966
Chrome Offset Extension Brackets - Sold in pairs (footpegs not
included) ��$42.99
• Footpeg mounting arms are adjustable and can be mounted in
three pre-set positions to match the riders heights and preferred
riding position
• Features black mounting brackets with chrome footpeg arms and
clevises
• Includes all required mounting hardware
• Accepts most standard male mount pegs
610362 Fits all Sportster models from 04-13��$159.99
Note: These peg extensions will reduce ground clearance and increase the distance from the
Original Equipment footpegs to the brake and shift controls.
2.20
FOOT CONTROLS
APPAREL
SEATS &
BAGS
Chrome Highway Peg Brackets
for Dyna Glide Models
The perfect addition to Dyna Super Glide
models or to replace stock mounts on all
mid-shift Dyna Glide models from 91-Up.
Includes brackets, footpeg mounts and
hardware.
25256
Replaces OEM 49019-95 (sold in sets)
Chrome Passenger Peg Mounts
Stock replacement for Sportster models from
83-03 Perfect for adding rear pegs to these
bikes. Sold in pairs.
12932
Note: Passenger footpegs are not included in the kit.
Footpeg D-clips
Spring steel D-clip used to replace week or
lost stock clip and give floppy pegs a firm
hold again. 3/8” hole. Dealer pack of 5.
688709 Footpeg d-clip price each ��$0.80
FOOT
CONTROLS
HAND
CONTROLS
��$65.99
LIGHTING
Footpeg Anti-Sag D-Clips
Highway Peg Blocks for
Sportster Models
Transmission Mount Passenger
Peg Bracket for Big Twins
Fits Big Twins with rigid frames. Use with
any 3/8" stud-mount footpegs.
12686
Sold each��$59.99
When combined with footpegs, these
chrome steel blocks provide increased
comfort. Include required mounting
hardware, and measure approx. 6 1/2"-long.
Sold in pairs.
12935
For alternator Sportster models
from 84-98 (repl. OEM 49159-88T)
INTAKE
12971
Chrome Footpeg Clevis
Universal clevis’ for most stock or
aftermarket footpegs with male shanks.
Include hardware. Sold in pairs.
13004
With female bolt mount ��$19.99
13006
With male stud mount��$24.99
17568
Footpeg bolt, nut and spring clip
only, not chrome (sold each)��$2.99
Weld-On Frame Tab
Weld-on right hand side frame mounting
tab for all late model 4-speed Big
Twins without the Original Equipment
mounting tab.
17503
Sold each��$8.99
ENGINE
Bullet-Style Footpeg Supports
3/8"-24 Stud
Zinc-plated. Fits FL models from 65-84 and
FX models from 71-85.
12970
Replaces OEM 50973-65 (sold
each)��$7.99
13004
EXHAUST
12970
��$35.99
Note: Highway pegs should not be used under normal
stop-and-go operating conditions.
ELECTRICAL
Take the sag out of droopy male mount
footpegs. Replace the Original Equipment
D-clips with spring steel D-clips that have
a integral shim to put pegs back to a flat
and level position.
12704
Card of ten pairs ��$1.00
1/2"-20 Stud
Zinc-plated. Fits FL models from 41-64 and
FX models from 71-72.
12971
Replaces OEM 52683-74 (sold
each)��$9.99
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
26560
CHASSIS
19959
19960
26561
SHEETMETAL
19961
3-Piece Frame Clamps
Chrome-plated, 3-piece design eliminates
spreading the clamp to fit over frames.
Sold each.
11235
1" clamp 3-piece ��$9.99
11237
1 1/8" clamp 3-piece��$9.99
11236
1 1/4" clamp 3-piece��$9.99
Replacement Footpeg Bars
Chromed steel bars for 5/8" female mount
footpegs. Includes a 3/8"-16 x 3/4" grade 5
chrome-plated bolt and lockwasher. Use as
replacements for broken pegs. Sold each.
199592"-long��$8.99
199604"-long��$8.99
199615"-long��$9.99
OEMStyle
Bracket Kits
for Floorboards
INSTRUMENTS
& GAUGES
Replacement brackets
and mounting tabs for
installing floorboards.
26560
Bracket kit for aluminum primary
�� $32.99
26561
Bracket kit for ‘tin’ primary
��$32.99
2.21
GENERAL
CROSS
REFERENCE
FOOT CONTROLS
640977
640976
640981
2
640978
640980
640979
Black Banana Boards by CycleSmiths
CycleSmiths is now offering it’s popular Banana Boards and accessories
in a black powder coated finish. They still have that distinct look with
their long shape and curved front & rear tips. They feature a high-grip
rubber surface that is riveted to the floorboard for a very cool look. To
complete the package matching passenger floorboards, footpegs, shift
pegs, and brake pedal pads are also available.
Rider Floorboards
Fits all Touring and FL Softail from 80-Up
640976 Long (19” floorboards)�� $299.99
640977 Short (14” floorboards) �� $219.99
Passenger Floorboards
Fits all Touring and FL Softail models equipped with accessory
passenger floorboards from 80-Up
640981 Sold in pairs�� $165.99
Optional
640980
640979
640978
Accessories
Standard male mount footpegs (sold in pairs)�� $189.99
Shift/brake peg (sold each)�� $74.99
Brake pedal pad fits all Touring and FL Softail models from
86-Up �� $78.99
640971
640970
Banana Boards by CycleSmiths
CycleSmiths Banana boards have a distinct look with their long shape and
curved front & rear tips. They feature a high-grip rubber surface that is riveted
to the footboard for a very cool look. They are available in a 19” or 14” lengths,
matching passenger floorboards, brake pedal pad, shift pegs, and footpegs are
also available.
Floorboards
Fits all Touring and FL Softail models from 80-Up
640970 Long (19”) Banana Boards��$299.99
640971 Short (14”) Banana Boards ��$219.99
640973
640972
640974
640975
Passenger Floorboards
Fits all Touring and FL Softail models equipped with accessory passenger floorboards from 80-Up
640972 Passenger Banana Boards �� $159.99
Optional
640973
640974
640975
2.22
Accessories
Banana brake pedal pad fits all Touring models and FL Softails from 86-Up�� $79.99
Banana shift peg (sold each)�� $69.99
Banana male mount footpegs (sold in pairs) �� $179.99
FOOT CONTROLS
Adjustable Driver’s Mini-Floorboard Kit
Fit into the stock female footpeg clevis’ on models with forward controls. In addition
to 7/8" of fore-to-aft movement, they may be rotated in a 360° arc. Kit includes
everything necessary for installation and features flawless chrome-plating on the
individual components.
09910
Fits Dyna Wide Glide, FXST, FXSTC, FXSTS, FXSTSB, and 4-speed FXWG models
from 83-Up ��$144.99
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
TourEase Custom Floorboard Pads
Feature non-slip rubber pads, chrome slotted covers. Ready for
mounting on stock floorboard bases.
14319
Sold in pairs 91-Up ��$59.99
CHASSIS
SHEETMETAL
Adjustable Passenger’s Mini-Floorboard Kits for
Softail Models
INSTRUMENTS
& GAUGES
Designed to bolt to the passenger footpeg mounting points. Mini
“Shaker” floorboards have vibration-absorbing dampers. Both kits
have 7/8" of fore-to-aft movement and may be rotated in a 360°
arc. Kits include everything necessary to make the conversion, and
fit all FX Softail models and FLST models from 84-99, and FLSTC
models from late 87-89 (90-99 FLSTC models must use CC #09904).
Floorboards measure approx. 7 1/4" x 3 1/2".
09888
Kit with “Shaker” mini-floorboards ��$199.99
09904
Kit with “Shaker” mini-floorboards for FLSTC models from
90-99, all FXR models 82-00 ��$179.99
GENERAL
CROSS
REFERENCE
2.23
FOOT CONTROLS
651808
05103
2
654113
654112
Tour Ease Mini Floorboards
May be installed in any clevis-style footpeg mounts,
including as passenger floorboards for Softail models, or
to replace the stock rider pegs on FXR or Softail models.
Additional holes permit them to be rotated 15° for
increased comfort.
05103
Chrome, pair (measure 8"-long x 4"-wide)�� $56.99
651808 Black, pair (measure 8” long x 4” wide) ��$55.99
Note: When used in place of highway pegs, these floorboards should not be
used under normal stop and go conditions.
05100
05101
Replacement bolt and spacer set (Sold in pairs)
��$4.99
Replacement mounting blocks (Sold in pairs)
��$17.99
654114
654115
Fusion Series Adjustable Floorboards by Arlen Ness
• The perfect fusion of billet and rubber to provide the best in comfort and style
• Each Fusion Series floorboard is machined from 6061-T6 billet aluminum and
features knurled or linear rubber inserts for excellent foot traction.
• Matching passenger floorboards are available for each style (Available separately)
• Designed to match the Arlen Ness Fusion Grip and Foot & Shift Pegs (Available
separately)
• Driver floorboards measure: 13.8” L x 5.0” W; Passenger floorboards measure:
10.0” L x 4.0” W
• Each driver floorboard has 3 different mounting locations giving 3" of
adjustability. Allowing you to adjust the floorboard forward and back to obtain
your preferred riding position.
• Driver floorboards fit: 84-Up FLT/FLHT/FLTR/H-D FL Trike and 86-Up FLST
• Passenger floorboards fit: 93-Up FLT/FLHT/FLHR/FLTR/H-D FL Trike
654112 Fusion driver floorboards chrome�� $399.95
654113 Fusion driver floorboards black�� $399.95
654114 Fusion passenger floorboards chrome ��$299.95
654115 Fusion passenger floorboards black��$299.95
Tour Ease Passenger Floorboards
These passenger boards provide excellent comfort, and
have a unique universal mounting system that promotes
easy installation. Made from 12-gauge steel with rubber
pads, and triple chrome-plated.
05104
Set of two floorboards��$69.99
09888
651805
Adjustable Floorboard Kits
26569
2.24
Kits permit a full seven inches of fore-aft adjustment along with angle and
height adjustability utilizing forged and chrome-plated mounting brackets.
Available with modified versions of our popular oval floorboards or oval ‘shaker’
floorboards. Fit all 4-speed FXWG models from 80-86, and all Softail or Dyna
Wide Glide models from 84-Up (except FL Softail models). May also be installed
on any motorcycle with clevis-style footpeg mounts. For example, they will fit on
the rear of Softail models as a set of passenger floorboards. Includes hardware
and instructions.
26568
Chrome, oval ‘shaker’ floorboards ��$112.99
651805 Black, oval floorboards��$97.99
26569
Chrome, oval floorboards (shown) ��$99.99
651806 Black, oval ‘shaker’ floorboards��$108.99
FOOT CONTROLS
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
605720
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
605721
INTAKE
BEFORE
AFTER
Extended Reach Floorboard Kits
• This kit extends the rider footboard
forward of the stock location by about
1.5 inches, providing the tall rider a
comfortable riding position.
• Accepts original mounts & includes left &
right footboards & rubber pads as shown,
pans available in black or chrome finish.
• Fits 02-Up touring models, also 97-01
touring models equipped with extended
reach billet style brake lever #42638-03.
688852 Extended reach floorboards, black
�� $129.99
688853
Extended reach floorboards, chrome
�� $129.99
Half Moon Rider Floorboard
Kits
This new design combines a classic style
half-moon shaped footboard with the
comfort of today’s vibration isolated rubber
mountings designed for long comfortable
riding. Kit includes left & right footboard
pans and matching rubber inserts.
Fits 86-Up FL Softail models.
688850 Half moon floorboard kit, black
��$104.99
688851
Reduced Reach Passenger
Floorboard Brackets
ENGINE
Reduced reach passenger floorboard
brackets raise the floorboards about
2-1/4” higher for increased passenger
comfort. Kits include all necessary
mounting hardware and are available
in either a chrome plated or gloss black
finish. Fits all 93-Up Touring modes. Sold
in Pairs
605720Chrome�� $113.99
605721 Black (Repl. OEM# 50789-99B)
GASKETS
TRANSMISSION
& CLUTCH
��$113.99
DRIVELINE
Half moon floorboard kit, chrome
��$104.99
WHEELS
TIRES &
BRAKES
CHASSIS
05150
SHEETMETAL
651809
INSTRUMENTS
& GAUGES
Chrome Undercovers for Passenger Floorboards
Look good even when passenger floorboards are folded up. Simple installation limited to
drilling mounting holes in the floorboard bases. Sold in pairs.
05150
Chrome, Fits all Touring models 87-Up��$36.99
651809 Black, Fits all Touring models 87-Up��$35.99
GENERAL
CROSS
REFERENCE
2.25
FOOT CONTROLS
Early Model
Late Model
26567
2
26487
26564
12997
Solid Floorboards for FL Models
Chrome plated floorboards with solid mount pads fit
4-speed FL models from 70-84. Can also be used on early
steel primaries when bracket kit CC #26561 is used.
190509 Sold in pairs��$49.99
26565
Black rectangular pads (repl. OEM 50614-66T)
sold in pairs��$5.99
651807
12999
Original Equipment-Style Floorboards
Available in three different versions that fit the stock mounting brackets on
all 4-speed models from 40-84. The oval ‘shaker’ floorboards provide Original
Equipment styling, with floating upper plates just like the late model floorboards.
Replacement bracket kits are available separately.
Floorboard Sets
26487
Standard oval floorboards (repl. OEM 50603-40) ��$51.99
26564
Rectangular ‘shaker’ floorboards (repl. OEM 50603-74TA)��$64.99
26567
Oval ‘shaker’ floorboards ��$76.99
190504
Note: Installation of oval ‘shaker’ floorboards on foot clutch models reduces the amount of travel available
for the foot clutch rocker pedal. Modifications may be required on these models.
Replacement Parts
26565
Black rectangular pads (repl. OEM 50614-66T) sold in pairs��$5.99
26488
Black replacement pads for oval floorboards (Sold in pairs)��$9.99
26566
Replacement bumpers (repl. OEM 50620-74) set of 8 ��$0.87
26559
Rectangular floorboard upper plate with pad (sold each) ��$11.49
26488
Late Model Floorboards
26566
Vintage-Style Floorboards for Touring
and Softail Models
Chrome plated vintage style floorboards feature raised
footpad and antivibration dampeners for a comfortable
ride. Fits all Touring models from 80-Up, and FL Softail
models from 86-Up. Replacement rubber pads and
vibration dampener kits are also available separately.
190504 Floorboard set (repl. OEM 50599-89T)�� $66.99
26488
Black replacement pads for oval floorboards (Sold
in pairs) �� $9.99
26566
Replacement bumpers (repl. OEM 50620-74) set
of 8 �� $0.87
2.26
These alternatives to the stock floorboards fit all 5-speed Touring and FL Softail
models from 80-Up. The oval ‘shaker’ set has the mounting brackets offset from
the center of the floorboards. Depending on which way they’re installed, you’ll
end up with your feet approximately 1" further ahead of, or further behind,
the stock position. This permits you to tailor your foot placement for increased
comfort. The rectangular ‘shaker’ floorboards are replacement items for crashdamaged or used motorcycles. Compatible with Original Equipment or CC
replacement parts.
Floorboard Sets
12997
Rectangular ‘shaker’ floorboards (repl. OEM 50621-79A)��$67.99
651807 Black, Rectangular ‘shaker’ floorboards (repl. OEM 50621-79A)��$65.99
12999
Standard oval floorboards��$51.99
Replacement Parts
26565
Black rectangular pads (repl. OEM 50614-66T) sold in pairs��$5.99
26488
Black replacement pads for oval floorboards (Sold in pairs)��$9.99
26566
Replacement bumpers (repl. OEM 50620-74) set of 8 ��$0.87
26559
Rectangular floorboard upper plate with pad (sold each) ��$11.49
FOOT CONTROLS
APPAREL
SEATS &
BAGS
688291
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Floorboard Heel Guard
Clutch and Brake Pedal Pads
Colored "Oval" Floorboard Mats
These Colored "Oval" Floorboard Mats fit
stock 40-65 FL models plus any aftermarket
oval floorboards fitted to custom Bobbers.
Available in red, black or white. A super
trick way to class up your ride! Affix with
adhesive or rivets. A great look when used
along with our Solo Seats, vintage style grips
and kicker pedals which are also available
in matching red, Black or white! Replaces
OEM#50614-40. Sold in pairs.
632356 Floorboard Mats, Oval -White $8.99
632357 Floorboard Mats, Oval - Red��$8.99
26488
Black replacement pads for oval
floorboards (Sold in pairs)��$9.99
Three piece rubber clutch & brake pedal
pads for use with early foot rocker clutch &
brake pedal. Great for restorations or retro
styled customs. Available in black or white.
632349 Clutch and Brake Rubber Pads 3
Piece set Black ��$24.99
632350 Clutch and Brake Rubber Pads 3
Piece set White��$24.99
These new rider footboard heel guards
avoid damage to your boots and prevent
melted rubber & scuff marks on your
exhaust. This heel guard mounts to the
right-side footboard and protects your
boot from contact with the hot exhaust/
shield. The subtle curved shape keeps the
boot heel away without restricting fore
& aft movement of the rider’s foot. Kit
includes chrome or black heat resistant
steel guard with all mounting hardware.
Easy to install & sold each.
Fits: 12-Up FLD models, 86-Up
Touring & FL Softail models equipped
with traditional and swept wing
footboards.
688290 Floorboard heel guard, chrome
EXHAUST
INTAKE
ENGINE
�� $29.99
688291
Floorboard heel guard, black
�� $29.99
GASKETS
TRANSMISSION
& CLUTCH
130413
130412
DRIVELINE
Brake Pedal Pads
Fits FX Softail and Dyna Wide Glide
models from 84-Up, and 83-86 4-speed
FXWGs.
130412Slotted ��$15.99
130413Diamond ��$14.99
Brake Pedal Pad
Brake Pedal Pad Kit
GENERAL
Brake Pedal Rubber
Replacement black rubber for the brake
pedal on all early 4-speed FL models.
12243
Replaces OEM 36954-62T (sold
each)��$2.99
�� $11.99
Brake pedal rubber only (replaces
OEM 36964-67)��$3.99
CHASSIS
INSTRUMENTS
& GAUGES
��$4.99
Provides you with you a larger, easier-to-use
rear brake pedal. Fits most Big Twin models
from 65-86.
28126
Kit (replaces OEM 36956-65TA)
WHEELS
TIRES &
BRAKES
SHEETMETAL
Replacement pad for FX Softail and Dyna
Wide Glide models from 84-Up, and 83-86
4-speed FXWGs.
12989
Replaces OEM 42532-82T (sold each)
12241
ELECTRICAL
2.27
CROSS
REFERENCE
FOOT CONTROLS
642790
2
642798
642791
642799
642792
642800
642801
642793
642802
642794
Billet Shift Linkages by Landmark
Landmark gear shift linkages come complete with transmission lever cover - easily installed in just 5 minutes. We use aircraft quality rod-ends for
a tighter and smoother shift. The new look is finished off with the provided custom nuts and bolts.
For Softail and Touring Models 86-Up
642790 Barbed wire shift link chrome �� $149.99
642791 Skull shift link chrome �� $129.99
642792 Slotted shift link black �� $129.99
642793 Slotted shift link chrome�� $129.99
642794 Shotgun shift link black�� $149.99
For Dyna Models with Forward Controls 06-Up
For Sportster Models with Forward Controls 04-Up
642799 Skull shift link black �� $99.99
642802 Shotgun shift link black�� $99.99
Small-Diameter Shift Linkages by Landmark
Complete sets that include the rod, heim joints, lever shroud and hardware. Available in
highly-polished stainless steel versions, or chrome-plated. Features a smaller diameter rod
than Landmark’s standard round rods.
Polished Stainless Steel
16499
3"-extended for all 5-speed Softail models (except FLSTS) from 86-Up (13 3/4"-long)$90.99
Chrome-Plated
16320
Fits all 5-speed Softail models (except FLSTS) from 86-Up (11 3/4"-long) �� $55.99
16321
16322
16324
Fits all Dyna Wide Glide models from 93-Up �� $55.99
2.28
FOOT CONTROLS
APPAREL
600610
Custom Billet Shift Linkages
600611
600612
600613
Choose from a wide variety of cutting
edge designs. CNC-Machined from billet
aluminum and then beautifully chromeplated. These pieces will dress-up any bike.
They measure 10.25” long and will fit most
Softail and Touring models. Includes (2) 5/1624 studs and (4) 5/16-24 jam nuts. Requires
separate purchase of heim joints (sold
separately).
600610 Tribal Flame��$59.99
600611 Maltese Cross with Flames��$59.99
600612 Three Skulls��$59.99
600613 Flaming Skulls��$59.99
600614 Trucker Girl ��$59.99
600615Gothic��$59.99
600616 Gothic Sword ��$59.99
600617 Tribal Spade ��$59.99
SEATS &
BAGS
Optional Chrome Heim Joints
Chrome 5/16-24 female heim joints.
060052 Sold each��$12.99
ELECTRICAL
600614
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
EXHAUST
600615
INTAKE
ENGINE
600616
GASKETS
600617
TRANSMISSION
& CLUTCH
DRIVELINE
TC Bros. Choppers
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Universal Linkage Kit by TC Bros
Shift Linkage for Softail Models with Crossover
Exhaust by Landmark
Top-quality polished stainless steel by Landmark won’t peel, pit, chip
or discolor. Easy-to-install, includes all hardware.
16580
Fits FLSTS Heritage Springer Softail models from 97-03��$109.99
Universal Linkage Kit for all TC Bros Choppers forward control
kits. The rods/tubes will need to be cut to fit your application. KIT
INCLUDES: two 24’’ long 5/16” threaded rods, four 5/16” ball joints,
two 5/16” ID x 1/2” OD raw steel tubes (to cover rod threads and
increase rigidity), eight 5/16” jam nuts, four nylock nuts, and four
flat washers.
660910 Universal linkage kit�� $49.99
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
2.29
FOOT CONTROLS
19318
19294
2
19317
Chrome Shift Linkage
19318
Measures 10 3/4"-long with 5/16"-24 threads, and is chrome-plated.
Fits Softail models with forward controls from 86-Up (except FLSTS
models from 97-03), as well as other custom applications.
19294
Complete kit (replaces OEM 33728-90A)��$29.99
19318
Shifter rod ONLY (replaces OEM 11729)��$7.99
19511
19513
Chrome Shifter Linkage
Includes gear shifter rod end, shoulder bolt with locknut, shifter rod
and clevis. Fits 71-73 FX models and 52-84 FL foot shift models.
19317
Complete kit��$24.99
Chrome Shifter Rod
Fits all Softail models from 86-Up (except FLSTS models from 97-10).
19318
Shifter rod ONLY (replaces OEM 11729)��$7.99
Chrome Rod End
Fits all Big Twins from 37-66 with hand or foot shift.
19511
Replaces OEMs 33870-51, 33871-67 ��$7.99
Chrome Shifter Rod End
Replacement chrome shift rod end for Softail models from 84-Up,
4-speed FXWG models from 80-86 and Dyna Glide models from 91-92.
Also great for custom linkage applications using 5/16"-24 threads
(replaces OEM 33871-85).
060052 Sold each��$12.99
Chrome Clevis Pins
These chrome-plated clevis pins include the washer and cotter pin.
Fits many applications from 30-10.
19513
Replaces OEM 42269-30 (pack of 10) ��$0.90
Chrome Shift Rod Spherical Joint
Improves the looks of shifter linkages. Fits all Softail models from
86-96, most aftermarket forward control sets and many early models.
Sold each.
78351
Replaces OEM 33729-82��$7.99
Chrome Heim Joints
These flawlessly-plated units can serve a variety of uses, particularly when fabricating custom shift and brake linkages. The 5/16"
heim joints are available with right and left hand threads to make
links that are adjustable without disassembly. Made in the U.S.A.
Sold each.
19297
1/4" x 1/4-28 female ��$28.99
19298
5/16" x 5/16-24 male��$24.99
19299
5/16" x 5/16-24 female��$21.99
19302
5/16" x 5/16-24 male (left hand thread)��$19.99
19301
3/8" x 3/8-24 female ��$25.99
Landmark Heim Joints
Aircraft-quality rod ends ensure durability and smooth shifting.
Replace most heim joints with 5/16"-24 right hand threads. Sold each.
16586
Stainless steel ��$29.99
16327Chrome��$24.99
2.30
FOOT CONTROLS
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
Chrome Rear Master Cylinder for Touring
Models
Tired of looking at that black master cylinder? Don’t want a
bulky chrome cover? Replace your stock master cylinder with this
beautiful chrome piece! Replaces OEM 41708-08. Sold each.
642714 Chrome rear master cylinder for FLT models 08-13�� $139.99
LIGHTING
ELECTRICAL
EXHAUST
Wagner-Lockheed Type Master Cylinders
Fit hydraulic drum brake applications on FL models from 58-72 or
FX models from 71-72, and rear disc brake applications on FL and FX
models from 73-E79.
For drum brake applications from 58-72 (replaces OEM 41761-58)
26222Chrome��$54.99
26251
Ball burnished��$49.99
For disc brake applications from 73-E79 (replaces OEM 41761-73)
26218Chrome��$54.99
26219
Ball burnished��$49.99
INTAKE
Master Cylinder Cover
ENGINE
Fits 4-speed FL models from late 79-84, FLT models from 80-82,
FXWG models from 80-82, and FL Softail models from 87-99.
130008 Replaces OEM 41745-79T�� $16.99
GASKETS
Replacement Parts
12535
Imported rebuild kit (repl. OEM 41762-58A) ��$9.99
130616 Rebuild kit. Fits disc or drum brake applications 58-79 ��$9.99
26224
Replacement chrome cap ONLY��$8.99
26254
Dust boot for 58-69 Big Twins (repl. OEM 41764-58) pack of 10
TRANSMISSION
& CLUTCH
��$1.20
28129
Dust boot for 70-E79 Big Twins (repl. OEM 41764-70) pack of 5
��$1.60
DRIVELINE
WHEELS
TIRES &
BRAKES
Rebuild Kit for Wagner-Lockheed Master
Cylinder
Rebuild kit for use on Wagner-Lockheed type master cylinders used
on FL and FX models 58-79
12535
Imported rebuild kit (repl. OEM 41762-58A) �� $9.99
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
2.31
FOOT CONTROLS
25909
26255
2
Chrome Rear Master Cylinder
Chrome-plated reproduction of the ‘Girling’ master
cylinder fitted to all FX models from 83-E87 (except 84
FXE). May also be installed on 82-E87 FXR models, but
the pipe plug on the back will have to be removed for
stop light switch installation.
26249
Replaces OEMs 42446-82A, 42470-82A��$74.99
25909
Chrome Late-Model Rear Master Cylinders
Chrome-plated reproductions of the 5/8"-bore Original Equipment units with the
ribs polished off before plating. The units for 87-03 models also feature custom
top covers.
26255
Fits Sportster models from 82-E87 and FL Softail models from late 86-E87
(repl. OEMs 42453-82A, 42454-82) ��$101.99
25909
Fits Sportster models from late 87-03 (repl. OEM 42456-87B) ��$159.99
26072
Fits FL Softail models from late 87-99 (repl. OEM 42468-87D)��$159.99
26069
Rebuild kit for CC #26255 ��$13.99
Chrome Master Cylinder Cover
Fits front handlebar-mounted master cylinders on all
models from L85-95.
26288
Cover, replaces OEMs 45004-85, 42381-87��$11.99
26248
17552
Early Master Cylinder Cover Gasket
Fit all models from 72-81 (pack of 10)
10432
Replaces OEM 45012-72��$1.30
26101
Kelsey-Hayes Type Master Cylinders
Chrome reproductions of the Kelsey-Hayes master cylinder. Fits 80-81 Sportster
models, late 79-82 FX models and 83 FXEs. Kit includes all internal components,
boot, cover gasket and chrome top cover.
26248
Complete 3/4"-bore master cylinder for applications using Original
Equipment-style rear calipers (repl. OEMs 42453-80A, 42454-80A)��$62.99
17552
Complete 5/8"-bore master cylinder for custom applications with multipiston
calipers��$62.99
26101
Master cylinder rebuild kit (repl. OEM 42374-77B)��$9.99
28139
Replacement master cylinder cap gasket (repl. OEM 42455-80, pack of 5)
Late Master Cylinder Cover Gasket
Fits the rear master cylinder on late 79-84 FL and late
79-82 FX models, the rear master cylinder on 77-81
Sportster models as well as the rear master cylinder
remote reservoirs on Big Twins from 82-09.
28139
Replacement master cylinder cap gasket (repl.
OEM 42455-80, pack of 5)��$2.00
2.32
��$2.00
26243
Replacement rubber dust boot (repl. OEM 41764-79, pack of 5) ��$1.60
Note: CC #26248 master cylinder may also be installed on 79 Sportster models if modifications are made to
the hard line between the brake tee and the master cylinder
FOOT CONTROLS
APPAREL
19069
12437
12436
SEATS &
BAGS
19070
19071
FOOT
CONTROLS
Chrome Brake Rods and Rod Clevis
19069
19070
12437
12436
19071
Foot pedal brake rod – 10"-long (front). Fits 37-57 Big Twins
(replaces OEM 42326-37)��$8.49
Rear brake rod – 23"-long. Fits 37-57 Big Twins (replaces OEM
42257-36)��$12.99
Short clevis for foot pedal brake rod. Fits 37-57 Big Twins
(replaces OEM 42333-30)��$9.99
Long clevis for foot pedal brake rod. Fits 45s from 35-52, 37-57
Big Twins and 34-50 Servi-Cars (replaces OEM 42273-30)�� $12.99
Rear brake rod and clevis – 22 5/16"-long. Fits Sportster and K
models from 52-66 (replaces OEM 42252-52)��$14.99
HAND
CONTROLS
Master Cylinder Rebuild Kits for FXR, Dyna
Glide and FLT/FLHT Models 11/16"
All the components needed to restore braking performance.
26062
Rear for all FLT, FLHT and FLHS models from 87-92 (repl.
OEM 42374-86)�� $9.99
26061
Front for all FLT, FLHT and FLHS models from 87-95; FXRT
and FXRS models from 87-92 and Dyna Glide models from
91-94�� $9.99
LIGHTING
ELECTRICAL
EXHAUST
28138
INTAKE
26243
28129
ENGINE
GASKETS
26254
Master Cylinder Boots
Master Cylinder Rebuild Kits
Rear master cylinder rebuild kit for all models from late 87-03.
85472
Replaces OEM 42382-87A ��$38.99
Fits the rear master cylinder on 80-81 Sportster models, late 79-82
FX models, and 83 FXE models.
26243
Replacement rubber dust boot (repl. OEM 41764-79, pack
of 5) �� $1.60
TRANSMISSION
& CLUTCH
Fits the rear master cylinder on most models from 80-E87.
28138
Replaces OEM 40922-79 (pack of 5) �� $2.60
DRIVELINE
Fits the rear master cylinder on Big Twin models from 70-E79.
28129
Dust boot for 70-E79 Big Twins (repl. OEM 41764-70) pack
of 5�� $1.60
Fits the rear master cylinder on Big Twin models from 58-69.
26254
Dust boot for 58-69 Big Twins (repl. OEM 41764-58) pack
of 10�� $1.20
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
Rear Master Cylinder Rebuild Kits
Complete rear wheel master cylinder rebuild kit. 5/8"
26125
Fits all Sportster models 82-E87; FX models 83-86; Softail
models 84-E87 (repl. OEM 42374-82A)��$11.99
GENERAL
CROSS
REFERENCE
2.33
FOOT CONTROLS
28190
2
110531
Crush Washers
Top-quality washers are made in the USA
for the following applications. Sold in packs
of 10.
56236
56237
56242
Master cylinder for Big Twins from
83-89; Sportster models from 82-E89
(repl. OEM 41731-82)��$0.70
Master cylinder for Big Twins from
84-91; Sportster models from 84-E91
(repl. OEM 45583-83)��$0.70
Crush washers, 10 mm, Brake line
for Big Twins from 58-72 (repl. OEM
41744-58) Pack of 10��$1.00
26311
020538
26310
Washers for Banjo Bolts
Sealing washers for the front and rear banjo
fittings. Sold in packs of 10.
26310
10 mm. Fits dual disc handlebar
master cylinders and brake calipers
on most models (repl. OEM 4173188)��$1.00
26311
12 mm. Fits all single disc handlebar
master cylinders (repl. OEM 4173388)��$1.00
Chrome Brake Line Fittings
These brake line fittings are used on
handlebar mounted master cylinder and
front or rear brake line tees. Fit many
models from 72-81. Sold in packs of 5.
020538 Plug – 1/8" NPT (repl. OEM 4231158)��$3.00
110531 Straight male – 1/8" NPT to female
3/8"-24 inverted flare (repl. OEM
63609-72)��$1.80
28190
(repl. OEM 43307-78, pack of 5)$4.00
28071
25231
Banjo Bolt
3/8"-24 banjo bolt fits 10mm banjo and
includes sealing washers (repl. OEM
41747-82).
662000 Sold each��$8.99
Chrome Master Cylinder
Plungers
Master Cylinder Spacers
Chrome spacers have a 3/8"-diameter hole,
are 1/4"-thick and fit between the WagnerLockheed style rear master cylinder and its
backing plate. Fit all Big Twins from 58-E79,
and can be used as a universal spacer in
other applications.
19509
Replaces OEM 50668-35 (pack of 5)
Fits all Big Twin models with Wagner
Lockheed master cylinders. Sold each.
25231
58-69 (repl. OEM 41770-58)��$9.99
28071
70-E79 (repl. OEM 42333-70) ��$9.99
��$1.40
131721
Brake Light Banjo Bolts by
Goodridge
Combines a banjo bolt with a brake
light pressure switch. Great for custom
work. Zinc-plated or gold with flexible
plastic sleeve covers and 11"-long wiring
pigtail. Two sizes available for disc brake
applications. Sold each.
Gold
131721 3/8"-24 for 10mm banjo��$19.99
131723 7/16"-24 for 12mm banjo ��$18.99
Zinc-Plated
141373/8"-24��$22.49
141387/16"-24��$20.99
2.34
Goodridge Chrome Double
Banjo Bolt
This chrome banjo bolt allows 2 banjos to
be fitted for dual caliper applications. Use
it on front dual disc models to run lines
directly from caliper to master cylinder and
eliminate “T”fittings, or on the rear to link
two calipers together. 3/8"-24 threads fits
most front dual disc master cylinders, rear
calipers and rear master cylinders.
130789 Sold each��$6.99

Foot Controls - Rollies Speed Shop

Transcription

Similar documents

HANDLEBAR DIM HANDLEBAR DIMENSIO