NEW - Igus
Transcription
NEW - Igus
NEW* NEW* NEW* NEW* NEW* NEW* NEW* Overview with all new products, which are in this catalog for first time. With page reference to detailled pages with technical data and more. page 16 iglidur® NEW* Polymer Plain Bearings Improve technology and reduce costs: Polymer plain bearings – economical, lubricationfree, maintenance-free, predictable. A choice of 34 different iglidur® materials. NEW: 6 new materials, e. g. for endurance run, food ... page 21 Additional iglidur® products NEW* NEW* Polymer plain bearings in the most diverse special designs: Clip bearings for sheet metal, flange bearings, slewing rings or stock bars – lubrication- and maintenance-free, long page 502 service life. NEW: Slewing ring bearing with toothed outer ring, piston rings ... igubal® Spherical Bearings NEW* Whether as an upright, pivot or flange bearing – lubrication- and maintenance-free igubal spherical bearings suits all requirements and are more economical and lighter than conventional spherical bearings. NEW: detectable Clevis joints, splitting pillow block ... page 563 NEW*: xiros® Polymer Ball Bearings NEW* NEW* NEW* NEW* NEW* Lubrication-free groove ball bearings and other ball bearing types made from igus® tribo polymers, for maximum service life and reduce coefficient of friction. NEW: groove ball bearings, axial, multi-axis, polymer ball transfer unit ... page 679 DryLin® linear guidance systems NEW* Lubrication- and maintenance-free plastic linear bearings for nearly all types of application. Wheather miniature or self-adjusting, wether round or angular. NEW: hybrid bearing, plastic linear bearings, guide carriages, slide pads ... page 707 DryLin® drive technology NEW* NEW* Lubrication-free leadscrew modules with different material- and shaftcombinations, linear guide units for easy adjustments and cogged-belt axis for quick positioning. NEW: Fast-Forward, high helix threads, accessories, ready-for-connection ... page 885 Service 01_GL3_E_Einl_RZ3.indd 1 About igus®, table of chemicals, fax form, index of addresses 1 2 3 4 5 6 page 957 15.03.11 17:50 Plastics for longer life® – make your machines more durable with plastics No lubrication, less maintenance, lower costs, longer life cycles, always available ex stock – these key principles formulated by us apply to all igus® products, systems and services. Tried and tested in terms of durability, friction properties and stability, igus® plastics are the technological core of the igus® range. This catalog lists more than 10,200 Polymer Bearing products available ex stock. We are looking forward to your phone call or e-mail. 2 01_GL3_E_Einl_RZ3.indd 2 15.03.11 17:50 Improve technology and reduce costs For years the igus® motto has been “plastics for longer life”. By this we mean the production of innovative plastic products which reduce maintenance work, achieve technical improvements, at the same time as reducing costs and increasing service life, everything delivered immediately from stock. From stock. Delivery time 24h or today or on request*. * Delivery time means time until shipping of goods. No minimum order value! No surchages! You can find our prices online at www.igus.eu “7 to 8 plus saturday” service Monday till Friday 7:00 am to 8:00 pm and Saturday from 8:00 am to 12:00 pm igus® headquarters in Cologne – research, development and production from a single location. Hotline Phone +49 (0) 22 03-96 49-1 45 Fax +49 (0) 2203-96 49-3 34 Onlineshop Go to www.igus.eu and find online catalogs, useful online tools and many more. Order around-the-clock! Do you have any questions? For questions and more informations call us or use our online productfinder at www.igus.eu Orders can be places until 8:00 pm local time. Phone +49 (0) 22 03-96 49-1 45 “Emergency-Service” around the clock. No minimum order quantity, no surcharges. 10,200 polymer bearings from stock. No lubrication. No maintenance. No downtime. igus® is accredited to DIN EN ISO 9001:2008 and to TS16949 01_GL3_E_Einl_RZ3.indd 3 /8:00 pm .../ /9001 /16949 15.03.11 17:50 Longer life cycles, lower costs Innovations with high-performance plastics igus® polymer plain bearings constitute the step from a simple plastic bushing to a tested, predictable and available machine component. Our research is essentially aimed at precise forecasts of bearing properties – especially life cycle – achieved by continuous advancements in materials. Predictable life cycle – no lubricant necessary Lubrication-free operation is something every designer strives for. igus® polymer plain bearings make this dream a reality. Decades of research now permit precise calculations of a polymer plain bearing’s life cycle. Fit and forget – matching solutions ex stock lnnovative, quickly assembled and economicalproducts Delivery ex stock – lower storage costs Large product selection – find the right solution at once Time-saving tools on the Internet We deliver customized, ready-to-fit units Quick reaction customer service with many local representatives in Germany and worldwide. igus® maintenance-free polymer plain bearings help improve your products and reduce costs at the same time. Many sample applications can be found at www.igus.eu 4 01_GL3_E_Einl_RZ3.indd 4 15.03.11 17:50 Resistant to dirt with igus® Zero-maintenance and high dirt resistance are not the only advantages of DryLin®. Longer life cycles – lower costs! No maintenance with igus® Various iglidur® materials for a wide variety of operating conditions. Large program of dimensions compatible with nearly all environments. Predictable life cycle! No lubrication with igus® The lubrication-free design of iglidur® also permits its use in the food and pharmaceutical industries. Don’t wait any longer! Corrosion-free with igus® Low weight, corrosion resistance as well as zero maintenance and lubrication achieve solutions for nearly all types of applications. Fit and forget! 5 01_GL3_E_Einl_RZ3.indd 5 15.03.11 17:50 Lubrication-free bearing with igus® – good for the environment and the wallet Lubrication-free and light weight The tribo-optimised iglidur® plastic plain bearings from igus® require neither oil nor grease. Due to continuous advanced developments the bearings specialist igus® now supplies alternatives more in line with environmental considerations for more and more applications that work with lubricated metallic plain and rolling bearings. The energy balance for the manufacture of plastics is very positive. Whereas the energy from 15 litres of oil is necessary to produce 1 litre of aluminum, and 1 litre of steel requires 11 litres of oil, the production of 1 litre of plastic only needs an average of 1.8 to 2.3 litres of oil. Do you allready know, that the production of plastics only requires 4 percent of annual worldwide oil requirements? Good for the environment iglidur® bearings are lubricantfree, so that no contaminants escape into the environment. The lightweight bearings will also help to reduce fuel consumption and carbon dioxide output in, for example, vehicles or aircrafts. Basically the reduced weight leads to lower masses and subsequently lower energy consumption. Exciting applications www.igus.eu/eu/plastics 6 01_GL3_E_Einl_RZ3.indd 6 15.03.11 17:50 A study has found that no less than half of all machine lubricants currently used in Germany seeps into soil and waters or evaporates into the atmosphere. According to a research team of chemists, mechanical engineers and environmentalists from the RWTH in Aachen, the estimates for Germany alone consume 250,000 tonnes per year. This corresponds to the amount required to fill 8,000 tankers. Required energy in oil [l] 16 14 12 10 8 6 4 2 0 Aluminum Steel Plastics The energy required to produce one volume litre of material (converted to litres of oil). Source: Clausthal University of Technology In contrast to metallic plain and rolling bearings, iglidur® plastic plain bearings from igus® require no oil or grease for lubrication. 7 01_GL3_E_Einl_RZ3.indd 7 15.03.11 17:50 iglidur® plain bearings are listed from page 21 Excellent polymers, improved through precise additions of reinforcements and solid lubricants, testedthousands of times, and proved millions of times – that is iglidur®. Every year, igus® engineers develop more than 100 new plastic compounds and conduct more than 5,000 tests on maintenance-free plain bearings. Over the years, this properties, every iglidur® bearing material possesses a number of special features making it suitable for particular applications and requirements has made it possible to establish a large database of polymers’ tribological properties. In addition to their general 01_GL3_E_Einl_RZ3.indd 8 15.03.11 17:50 Practical example igus® bearings and linear sliding films made of iglidur® material, which meets all demands of aseptic filling, are used here. Low adhesion and attrition factors against different kinds of stainless steel, negligible moisture absorp tion, very good stability against PES-cleaners, lubricantfree, all of that means no contamination of products of the aseptic atmosphere. Lifetime calculation online www.igus.eu/iglidur-expert Exciting applications can be viewed online at 01_GL3_E_Einl_RZ3.indd 9 product finder iglidur® www.igus.eu/iglidur-productfinder www.igus.eu/eu/iglidur-applications 9 15.03.11 17:50 igubal® spherical bearings are listed from page 563 igubal® spherical bearings are self-aligning components made entirely of high-performance plastics. The igubal® series provides designers with a complete system of self aligning bearings: Rod ends, clevis joints, flange bearings, pivot bearings and pillow blocks. Self- are insensitive to dirt, liquids, chemicals and fully corrosionproof. Bearings from the igubal® range are very light, compact and economical on two fronts: Low purchase price Low maintenance and installation costs adjusting bearings are easy to fit, adaptable to wide angular ranges and have been used to replace special housings in many cases. igubal® offers all the advantages of high-performance plastics, including dry-running capability combined with very good vibration damping. igubal® spherical bearings 10 01_GL3_E_Einl_RZ3.indd 10 15.03.11 17:50 Practical example TRIPENDO GmbH Bicycle Manufacturing The reclining wheel’s curve inclination is realized by means of rod ends in the journal link. The high top speed and rapid acceleration are partly due to the rod ends’ low weight. The bearing points do not require any elaborate sealing measures. Lifetime calculation online www.igus.eu/igubal-expert Exciting applications can be viewed online at 01_GL3_E_Einl_RZ3.indd 11 product finder igubal® www.igus.eu/igubal-productfinder www.igus.eu/eu/igubal-applications 11 15.03.11 17:50 xiros® polymer ball bearings are listed from page 679 The xiros® plastic ball bearings are single-row grooved ball bearings based on DIN 625. The lubricant-free and maintenance-free ball bearings consist of four components: The outer ring The inner ring The cage And the balls are suited for a multitude of applications that depend not on extreme rotary speeds or loads, but just on lubricant-free application in contrast to permanently lubricated metallic ball bearings. These areas are for example food and medical industries, packaging and textile industries, or the chemical industry and cleanroom applications as well as electronics and office technology. The inner and outer rings are made of igus® tribopolymers to maximize service life and minimize coefficients of friction. In contrast to metallic ball bearings, xiros® plastic ball bearings manage absolutely without lubrication. For this reason they 01_GL3_E_Einl_RZ3.indd 12 15.03.11 17:50 Practical example tesa scribos GmbH The xiros® plastic ball bearings B180 are used in coated guide rollers of different machines and provides the material guidance. The xiros® polymer ball bearings used now are cheaper by one-half and are supplied faster than the previously used bearings. Moreover, the low weight, low friction and the freedom from lubricants are congenial for the application. Lifetime calculation online www.igus.eu/xiros-expert Exciting applications can be viewed online www.igus.eu/eu/xiros-applications 13 01_GL3_E_Einl_RZ3.indd 13 15.03.11 17:50 DryLin® linear plain bearings, linear slide modules and drive technology are listed from page 707 DryLin® linear plain bearings are solid state, a totally different approach when compared with traditional recirculating ball bearing systems. These sliding plain bearings can basically be made of any high-performance polymer of the iglidur® series. This blends the advantages of DryLin® linear technology with those of all the various iglidur® bearing materials. DryLin® linear bearing systems are designed for dry-running. These systems are thus protected against are almost inaudible during operation. The flat, compact Leadscrew linear table for variable formats and handling tasks is extremely rigid due to the hardanodized aluminum profile. All bearing points are furnished with dry-running iglidur® materials. exposure to greases and oils. As a result, ambient dust and abraded material cannot cling to the bearing surfaces. Unlike recirculating-ball bushings, DryLin® bearings have no restrictions in terms of minimum stroke length and 14 01_GL3_E_Einl_RZ3.indd 14 15.03.11 17:50 Practical example FESTO AG & Co. KG Electrical Servo Drives For a wide variety of formats in printing, paper, packaging, transmission and wood processing systems, Festo demonstrates the use of the SHT DryLin® Leadscrew linear table in conjunction with its electrical servo drive. DryLin® expert with service life calculation DryLin® CAD configurator www.igus.eu/drylin-cad-expert www.igus.eu/drylin-expert Exciting applications can be viewed online at 01_GL3_E_Einl_RZ3.indd 15 www.igus.eu/eu/drylin-applications 15 15.03.11 17:50 NEW in this catalog iglidur® K iglidur® J260 iglidur® J3 News and line extensions iglidur® polymer bearings Versatile, wear-resistant Suitable for plastic universal material shafts page 175 page 209 ® ® Runs up to three time longer than iglidur® J page 219 iglidur PRT iglidur PRT iglidur® Stock Bars Slewing ring bearing with toothed outer ring Slewing ring bearing in a new low-cost design iglidur® materials as round material News and line extensions iglidur® – more Products ® page 550 page 552 ® ® page 555 igubal® Pillow Block Bearings igubal Clevis Joints igubal Clevis Joints igubal Clevis Joints Clevis joint, detectable Spring-loaded pin, detectable Clevis joint with spring- Pillow block bearing loaded pin, detectable with split housing and split ball page 617 page 628 page 614 page 616 xirodur® B180 ® igubal Spherical Bearings xirodur® B180 New Chapter: xiros® polymer ball bearings made of tribopolymers Cost-effective made of iglidur® J4 page 675 16 Radial deep-groove Radial deep-groove ball bearings, PA cage, ball bearings, PA cage, stainless steel balls glass balls page 690 page 690 Lifetime calculation, CAD files and much more support 01_GL3_E_Einl_RZ3.indd 16 www.igus.eu 15.03.11 17:50 iglidur® J350 iglidur® X6 iglidur® A350 Extremely wearresistant in rotation Runs up to six times longer than iglidur® X FDA-compliant and wear-resistant at high temperatures page 397 page 229 ® iglidur speedigus page 289 iglidur® Piston Rings igubal® Rod Ends News and line extensions igubal® rod ends iglidur® materials as customized molded parts page 558 ® igubal Pillow Block Bearings Easy clipping! ® igubal Spherical Bearings Adapter for pillow block Pivoting bearing bearings of series E “Soft Touch” – for precise run page 630 page 653 ® page 559 page 599 igubal Pivoting Bearings igubal® Pivoting Bearings Variable double joint Variable double joint page 660 ® page 661 xirodur B180 xirodur A500 xirodur A500 xirodur® A500 with shield PA cage/glass balls Radial deep-groove ball bearings, PEEK cage, stainless steel balls page 693 Radial deep-groove ball bearings, PEEK cage, glass balls page 694 Radial deep-groove ball bearings, PA cage, stainless steel balls page 695 page 692 ® ® Low-cost ball and socket joint igus® GmbH 51147 Cologne Germany | Phone +49 (0) 22 03-96 49-145 Fax -334 | www.igus.eu 01_GL3_E_Einl_RZ3.indd 17 17 15.03.11 17:50 NEW in this catalog xirodur® A500 xirodur® C160 xirodur® C160 xirodur® B180 Radial deep-groove ball bearings, PEEK cage, PAI balls page 696 Radial deep-groove Radial deep-groove Axial ball bearing, ball bearings, PP cage, ball bearings, PP cage, glass/stainless steel Glass balls Stainless steel balls balls page 697 page 697 page 698 xirodur® ESTM xirodur® EFSM xirodur® EFOM News and line extensions DryLin® rail guide systems Pillow block bearing, pivoting, glass/stainless steel balls page 703 EFSM flange bearing, 4-hole, glass/stainless steel balls page 704 EFOM flange bearing, 2-hole, glass/stainless steel balls page 705 DryLin® W DryLin® W DryLin® R DryLin® – Specialists Double rail, reduced weight Accessories: manual clamping, for simple positioning tasks page 784 Solid polymer bearing, long type, precise Telescopic rails with locking mechanism page 782 ® page 884/921 18 DryLin SHT Drive Technology DryLin® SHT Drive Technology Tables with quick release mechanism Linear slide, preload News and line extensions DryLin® drive technology page 903/910 Lifetime calculation, CAD files and much more support 01_GL3_E_Einl_RZ3.indd 18 page 866 ® DryLin Stainless Steel Compact XY-table, stainless steel page 807 page 905 www.igus.eu 15.03.11 17:50 xirodur® B180 xirodur® B180 xirodur® B180 Polymer ball transfer unit, POM balls page 699 Multi-axis plastic bearing, PP balls page 700 Slewing ring ball Pillow block bearing, bearing, glass/stainless rigid, glass/stainless steel balls steel balls page 701 page 702 DryLin® T DryLin® T DryLin® N DryLin® W Clear anodised guide rails Clamping elements for quick positioning New carriage Hybrid linear bearing – roll and slide page 734 page 738 page 754 ® ® ® DryLin – Specialists DryLin – Specialists DryLin – Specialists Measuring system with DryLin® Q – Round slide disks external signal output torque-resistant square made of iglidur® J guide page 868 page 869 page 872 ® ® page 778/870 DryLin® Stainless Steel Linear slide table “Hygienic Design” page 883/912 DryLin SHT Drive Technology DryLin SHT Drive Technology DryLin SHT Drive Technology DryLin® SHT Drive Technology Linear slide table with ball-bearing-mounted leadscrew page 907 High temperature up to +180 °C Compact linear slide module with high helix leadscrew page 915 EasyTube with lasered scale page 911 ® xirodur® ESTM page 918 igus® GmbH 51147 Cologne Germany | Phone +49 (0) 22 03-96 49-145 Fax -334 | www.igus.eu 01_GL3_E_Einl_RZ3.indd 19 19 15.03.11 17:50 NEW in this catalog DryLin® SHT Drive Technology DryLin® SHT Drive Technology Accessories: angular drive, 2 styles page 925 Accessories: stainless Opposite belt drive steel angle kit for linear leadscrew tables page 926 page 934 Belt drive – specialists DryLin® SHT Drive Technology DryLin® SHT Drive Technology DryLin® SHT Drive Technology DryLin® TR Linear Screw Drives NEMA motor flange Ready to use with stepper motor Accessories: spacer, motor flange, and coupling page 942 Trapezoidal leadscrew nuts, cylindrical, made of iglidur® J page 950 DryLin® TR Linear Screw Drives DryLin® TR Linear Screw Drives Leadscrew support blocks Quick release nuts – Fast Forward page 937 DryLin® TR Linear Screw Drives page 939 DryLin® TR Linear Screw Drives Anti-backlash thread Leadscrews and nuts nuts, made of iglidur® J with high helix thread page 952 20 page 953 DryLin® SHT Drive Technology page 954 Lifetime calculation, CAD files and much more support 01_GL3_E_Einl_RZ3.indd 20 DryLin® SHT Drive Technology page 935 page 955 www.igus.eu 15.03.11 17:50
Similar documents
plastics for longer life®... www.igus.eu/bicycle igus® solutions
completely made of plastic.
The igubal® series provides developers with a complete
system of self-adjusting bearing elements: rod end
bearings, clevis joints, flange bearings, spherical bearings
an...