testing services provided by frim which accredited by iso 17025 and

Transcription

INSTITUT PENYELIDIKAN PERHUTANAN MALAYSIA
FOREST RESEARCH INSTITUTE MALAYSIA
TESTING SERVICES PROVIDED BY FRIM
WHICH ACCREDITED BY ISO 17025 AND
OTHER RECOGNISED INTERNATIONAL
BODY FOR WOOD-BASED INDUSTRIES
Dr Rahim Sudin
Director Forest Products Division FRIM.
BrandLaureate
Best Brand Awards
ISO 9001-2008 Certified
5S
http://www.frim.gov.my
CONTENTS
• Introduction – Challenges issues on
forest products industries
• FRIM - R&D on forestry, biodiversity,
biotechnology, medicinal plants &
forest products institution
• 11 Accredited testing services labs.
BrandLaureate
Best Brand Awards
5S
Economic
development to
achieve NATIP
Target by 2020
CHALLENGES
ISSUE
Compliance to
International
standard
FOREST
PRODUCTS
INDUSTRIES
Application of
advanced
technology and
utilisation of
sustainable raw
materials
BrandLaureate
Best Brand Awards
Green
Product
Technology
5S
Act 319
1920’s
1929
Malaysian Forestry Research
and Development Board
(MFRDB)1985
1985
2011
4
BrandLaureate
Best Brand Awards
5S
ORGANISATION CHART
Ministry of Natural Resources and Environment
MFRDB
FRIM
Legal Affairs
Director General
Internal Audit Unit
Quality Management
Corporate Management
Research Advisory Committee (RAC)
APAFRI
Technical Advisory Panel (TAP)
Board Secretariat
Deputy Director General
(Research & Development)
Division Director
Forestry and Environment
Division Director
Forest Products
Deputy Director General
(Operations)
Division Director
Research & Corporate
Planning
Division Director
Administration
Division Director
Finance
Division Director
Forest Biotechnology
Division Director
Human Resource
Division Director
Forest Biodiversity
Division Director
Technical Services
Division Director
Natural Product
Division Director
Commercialization & Innovation
5
BrandLaureate
Best Brand Awards
5S
FRIM Labs Accredited by
ISO/IEC 17025
Bil
Laboratory
SAMM No.
Year Accredited
1.
Wood Preservative Analysis Lab (MAAK)
154
1998
2.
Paper Testing Lab (PTL)
205
2001
3.
Wood Composite Testing Lab (WCTL)
301
2005
4.
Fire Performance Testing Lab (FPL)
262
2005
5.
Wood Drying Lab (WDL)
491
2010
6.
Wood Finishing Lab (MKK)
492
2010
7.
Wood Lamination Lab (WLL)
482
2010
8.
Furniture Testing Lab (FTL)
483
2010
9.
Timber Engineering Lab (TEL)
484
2010
10.
Wood Mycology Lab (WML)
529
2011
11.
Natural Product Quality Control (NPQC)
558
2012
BrandLaureate
Best Brand Awards
5S
Top 5 Malaysian furniture export
countries (2009-2011)
2500
2000
RM Million
1500
2009
2010
1000
2011
500
0
USA
BrandLaureate
Best Brand Awards
JAPAN
5S
UK
AUSTRALIA
SINGAPORE
FURNITURE TESTING LAB
• Established in1989.
• Objective – to assist local furniture industry to make
improvement on quality product in order to comply
international market.
• FTL – the only furniture testing lab accredited by
ISO/IEC 17025 and FIRA in Malaysia.
• Testing services based on Malaysian Standard (MS),
British Standards (BS), European Norm (EN) dan ISO.
BrandLaureate
Best Brand Awards
5S
Various Type of Furnitures
tested at FRIM
• Seatings
• Tables
• Educational
furniture
• Storage
appliance
• Office furniture
BrandLaureate
Best Brand Awards
• Office screens
• Outdoor
furniture
• Beds
FIRA International Limited
ACCREDITATION NO FIRA 001
5S
MS ISO/IEC 17025
TESTING
SAMM NO. 483
Furniture Testing Lab at FRIM
10
BrandLaureate
Best Brand Awards
5S
Testing Services provided by FRIM
BrandLaureate
Best Brand Awards
IMPACT TEST
5S
Testing Services by FRIM
Durability of chairs
Durability of wardrobe
BrandLaureate
Best Brand Awards
5S
Recognition of FTL
• 1994 – Accredited by FIRA which is
recognised by UK and European
market.
• 2010 – Accredited MS ISO/IEC 17025
(SAMM 483) and recognised by many
ILAC member countries by using
ILAC-MRA logo.
BrandLaureate
Best Brand Awards
5S
TEST REPORT
FIRA International Limited
ACCREDITATION NO FIRA 001
TARIKH: 6 APRIL 1994
BrandLaureate
Best Brand Awards
5S
Statistik Pelanggan FTL & Sampel
Ujian (2005 – Jun 2012)
350
300
250
293
277
286
239
200
213
203
202
181
Sampel
150
Pelanggan
100
50
69
49
49
2005
2006
56
65
61
58
2009
2010
2011
68
0
BrandLaureate
Best Brand Awards
2007
2008
5S
2012
Wood Composite Testing Laboratory
(WCTL)
- Accredited to ISO/IEC 17025
for formaldehyde emission
testing of boards since 2005.
- Certified to ISO 9001:2000 for
testing forestry-based
products since 2001.
- IKM Excellence Lab (since
2006)
Perforator method
Desiccators method
16
BrandLaureate
Best Brand Awards
5S
California Air Resource Board requirements
• Airborne Toxic Control Measures (ATCM)
• Focus on hardwood plywood (HWPW), particleboard (PB), and
medium density fiberboard (MDF)
BrandLaureate
Best Brand Awards
5S
FRIM as TTO for CARB & JAS testing
Laboratory
• 8 Jan 2013 – recognised by Air Resources Board (USA)
as CARB-approved third party testing organisation
(TTO) for testing formaldehyde emission from WBP
based on ASTM E 1333 large chamber method.
• fully-equipped with 3 pre-conditioning chambers and 1
large main chamber (22 m3) and a chemistry laboratory
manned by the trained staff
• testing process takes up to 14 working days complete
with the preparation of report
• FRIM collaborate with Mutu Certification International
as ROCB.
BrandLaureate
Best Brand Awards
5S
Pre-conditioning chambers
22 m3 Conditioning chamber
BrandLaureate
Best Brand Awards
5S
Formaldehyde emission control
Analytical lab
JAS (2008)
MAFF Notification No. 1751 standard, among tests
offered as below:
i. Class 1 Bending Test
ii. Panel Shear Test
iii. Formaldehyde Emission Test
iv. Bonding Quality – Type I and Type II Shear
Strength Test
v. Bonding Quality – Type I and Type II of
Immersion Delamination Test
vi. Moisture Content Test
BrandLaureate
Best Brand Awards
5S
Measuring thickness of
board
Formaldehyde test by
desiccator method
Bonding
test
Bending strength
Panel Shear test
BrandLaureate
Best Brand Awards
5S
Wood Preservation Analysis Laboratory
Determination of preservative in wood
BrandLaureate
Best Brand Awards
5S
Paper Testing Lab (PTL)
• Accredited lab to conduct quality of paper supply to Government Agency (Tender),
• Quality control of imported Pulp & paper
• Chemical properties of wood and non-wood bio-resources - cellulose,
hemicellulouses, lignin and extractives;
• Pulping processes - mechanical, chemical, chemi-mechanical and bio-pulping;
• Bleaching processes - conventional, elementary chlorine-free (EFC) and biobleaching;
• Paper-making - circular shape, square shape and handmade craft paper; and
• Paper testing - physical, mechanical and optical properties.
BrandLaureate
Best Brand Awards
5S
Fire Protection Laboratory
• Provide testing services for fire resistance door/partition on building system and
product materials based on national or international standards.
•Examples are timber and steel door set, wall panels and safety cabinets. The
test results are also endorsed by the Fire Service Department, Malaysia.
BrandLaureate
Best Brand Awards
5S
Fire door testing
BrandLaureate
Best Brand Awards
5S
Wood Drying Laboratory (WDL)
- Accredited by Standard Malaysia (SAMM )
• Optimizing kilning process - to attain the
targeted moisture content with acceptable
quality at minimal drying time thus costsaving;
• Products testing and assessment in
simulated end-use test environment;
• Wood moisture content and density
measurements*;
• Moisture meter calibration services*;
• Advice on appropriate target moisture
content,
factory
control
and
measurement;
• Customized in-house training on moisture
related issues; and
• Sound absorption test using impedance
tube method.
BrandLaureate
Best Brand Awards
5S
Testing services for Wood Drying FRIM
Wood Drying
Commond defect in Wood Drying trial
Kiln drying by using solar
Solar drying by using PE and solar
BrandLaureate
Best Brand Awards
5S
Timber Engineering Laboratory (TEL)
The pioneer laboratory for determination of various wood species.
The Timber Engineering Laboratory is equipped with strength testing equipments
and expertise in mechanical and structural testing of wood and wood-based
materials according to Malaysian and international standards. Major tests conducted
include:•
•
•
•
Static bending
Tension
Compression
Shear
BrandLaureate
Best Brand Awards
5S
Wood Lamination Laboratory (WLL)
The Wood Lamination Laboratory is equipped with testing facilities to conduct
bonding and related strength testing, in accordance with Malaysian and other
international standards. Among tests conducted include :•
~
~
~
~
Bonding quality*
Immersion delamination test (JAS)
Boiling water soak delamination test (JAS)
Splitting test (ift guideline, Germany)
Conditioned water storage test (ift guideline, Germany)
•
~
~
~
Other tests or services
Moisture content and density test
Troubleshooting of wood bonding and finger-jointing
Other related tests
BrandLaureate
Best Brand Awards
5S
Wood Finishing Laboratory
This laboratory evaluates the quality of coating or finishes for wood and wood-based
products which is carried out in accordance with Malaysian or other international
standards. Relevant technical services provided are :-
•
•
•
•
•
•
•
•
Adhesion test
Scratch test
Taber Abrasion test
Impact test
Heat Resistance test
Resistance to household chemicals
Temperature - Change Resistance
Scratch Test for High Pressure Laminated (HPL) Coating
BrandLaureate
Best Brand Awards
5S
Wood Finishing Lab (MKK)
To determine the appropriate
finishing
Brushing test
Scratching test
BrandLaureate
Best Brand Awards
5S
Wood Mycology Laboratory (WML)
This laboratory provides technical services and advisory on durability and protection
related to wood decay fungi of wood and wood products. Major research topics on
fungi include natural durability decay tests on local timbers, decay on buildings and
wood structures, taxonomic and identification on local decay fungi and evaluation of
the effectiveness of fungicides to protect against attack by decay fungi. Typical tests
or services conducted are :• Laboratory Efficacy Test for Preservatives
• Exterior / Field Test for mold, sapstain and decay fungi
• Decay Fungi Identification & Cause of Decay
• Natural Durability Decay Test
• Graveyard Test
• Consultation Services
BrandLaureate
Best Brand Awards
5S
Other supporting test – Wood Anatomy
To determine the species of wood
-
Wood identification services at lab or site.
Course on wood identification technique.
BrandLaureate
Best Brand Awards
5S
Wood sawmill
Sawmill and wood machining &
prototype
a)
Wood machining (cut, saw, grinding and
planing)
b) Preparation of wood samples and
souvenier item.
BrandLaureate
Best Brand Awards
5S
2006
35
BrandLaureate
Best Brand Awards
5S
MS ISO/IEC 17025
TESTING
SAMM NO. 483
2010
36
BrandLaureate
Best Brand Awards
5S
Thank you
BrandLaureate
Best Brand Awards
5S

testing services provided by frim which accredited by iso 17025 and

Transcription

Similar documents

STORAGE WASTE MANAGEMENT MATERIAL