OxiClean uses sheet.indd

Transcription

OxiClean uses sheet.indd
Did you know?
Carpet
OxiClean® Versatile Stain Remover can be used in carpet-cleaning machines.
We suggest that you first contact the manufacturer of your machine to see if the
use of an oxygenated stain fighter is recommended and for necessary precautions.
Carpet Spot Remover
Up to ¼ scoop per 16 ounces of water
Remove excess liquid before treating stain. Apply only enough solution to saturate the stain. Allow solution to stand 1 to 5 minutes. Blot well with white
towel. Repeat as required. Rinse well with water and blot thoroughly. Allow to dry, then vacuum.
Outdoor
Pour or sponge OxiClean solutions from a bucket onto awnings, siding, decks* and
lawn furniture. Allow solution to stand 5 to 30 minutes. Scrub as required. Rinse well
with cool water. Work small areas so that your solution doesn’t dry on the surface.
*Only unfinished wood decks can be cleaned with OxiClean®.
¼-1 scoop per 1 gallon of water
Use OxiClean® Versatile Stain Remover to clean tile
around the pool.
Hard Surfaces
OxiClean® Versatile Stain Remover can be used to clean the inside of dishwashers. Dissolve one scoop of OxiClean® Versatile Stain Remover in one gallon of hot
water. Wipe down the inside of dishwasher and then run a rinse cycle in the empty
dishwasher.
Up to ¼ scoop per 16 ounces of water
Place ½ to 1 scoop into 1 gallon of warm water and mix well. Using a sponge, mop
or cloth, wipe down trash cans, ice chests, linoleum, and other hard surfaces to
remove stains and soils. Repeat as necessary. For shiny surfaces, rinse with clean,
wet cloth.
Laundry
A scoop of OxiClean® Versatile Stain Remover should be added to every load to boost
the power of your detergent and fight stains you didn’t know were there. Pretreat or
presoak for tough stains.
Top Load
Laundry Booster
¼ to ¾ scoop
¼ scoop per regular load,
¾ scoop per large or
heavily soiled load.
Begin filling washer with
proper temperature
water for your load. (See
garment care tag.) As with
detergent, add OxiClean to
the wash water before
adding laundry.
High-Efficiency
Laundry Booster
¼ to ½ scoop
¼ scoop per regular load,
½ scoop per large or
heavily soiled load.
Add OxiClean to the
empty tub before
adding clothes.
Do not mix OxiClean
powder with liquid
HE detergent in the
dispenser.
Pre-treat
Stain Removal
up to ¼ scoop
per 16 ounces of water
Apply solution to stain.
Rub and wait up to 10
minutes. Do not allow to
dry on fabric. For laundry,
wash as normal with
detergent and OxiClean.
Pre-Soaking
½ to 1 scoop
per gallon of water
Mix ½ to 1 scoop per
gallon of water. Add item.
Soak for 1 to 6 hours.
Remove item. Rinse
thoroughly for
non-washable fabric or
wash as normal with
detergent and OxiClean.
OxiClean® Versatile Stain Remover
What’s in Oxiclean Versatile Stain Remover
The two primary ingredients in OxiClean Versatile Stain Remover
are sodium carbonate (also known as washing soda or soda ash)
and sodium percarbonate (which is made from sodium
carbonate and hydrogen peroxide) Sodium carbonate is derived
from a mineral called trona. Hydrogen peroxide is naturally
produced in organisms as a by-product of oxidative metabolism.
Nearly all living things possess enzymes known as peroxidases,
which harmlessly and catalytically decompose low concentrations of hydrogen peroxide to water and oxygen.
Church & Dwight Co., Inc.
469 North Harrison Street
Princeton, New Jersey 08543
Toll free: 1-800-236-4175
For technical information visit,
www.ahprofessional.com.