Print Preview as PDF

25 - 29 OCTOBER 2016
Show Preview
HANOVER, GERMANY
24th International
Technology
2 1. -Sheet
2 5 . Metal
O ktoWorking
b e r 2014
HaExhibition
n n ove r
Hall 12
Separation technology | Flexible sheet metal working technology |
Machine elements and components | Process control and quality
assurance | Data processing (hard- and software) | Factory and
warehouse equipment, safety at work, environment protection |
Services, information and communication
ADIGE SPA, Italy
Hall 12, Stand A36
The new LT8.10 is a laser tube for those who do not believe in compromises: Its features
are a fiber laser source, tube diameters up to 240 mm and 40 kg/m, 3D tilt cutting, with a
very broad range of configurations available, excellent performance and ease of use. The
fiber laser source enables processing of any metal (copper, aluminum, brass, stainless
steel, zinc, iron, etc.) with a performance and quality that have been until now
unattainable.
www.blmgroup.com
ADIGE-SYS SPA, Italy
Hall 12, Stand B36
LC5 is the ideal solution for laser cutting of both sheet and tubes in situations where
installing two separate systems is hardly justifiable, due to reasons of dimensions,
production volumes or, more simply, cost-effectiveness. A single laser source and a single
cutting head is capable of switching from sheet to tube processing (and vice versa)
immediately, automatically and without the need of re-tooling. LC5 can process metal
sheet up to 3,000x1,500 mm (or 4,000x2,000 mm), and round, square, rectangular, oval
shaped tubes up to an inscribed diameter of 120 mm and a bar weight of up to 13.5 kg/m.
www.blmgroup.com
ADIRA - Metal Forming Solutions S.A., Portugal
Hall 12, Stand D66
HD Greenbender, the first “dematerialized” heavy duty press brake in the world,
designed with topology optimization technique. The highly innovative patented
multi-frame concept allows a very deep throat and avoids the need for pit installation in
long machines, for a fraction of the steel when compared to conventional press brakes.
Adira’s first laser additive manufacturing solution, the first machine capable of
producing large metallic parts, by powder projection or powder bed technology. BB3515,
the new member of ADIRA’s electric press brake Bluebender family, develops 35 tons
in 1,5 meter length, with very fast cycle times and very low energy consumption.
www.adira.pt
ALVARO SNC, Italy
Hall 12, Stand H94
Alvaro SNC is a company dedicated to the building and revision of uncoilers, strip
straighteners, power supplies, power and blanking lines. The company originates from the
determination of former employees of the Cattaneo company, which was located in
Olginate. Our long experience developed in this area makes it possible to realize efficient
products and ensuring a high standard of quality that allows us to look at the future with
confidence. Operating with reliability and passion, we also engage ourselves in meeting
the customers' needs by offering our professionalism at their service.
www.alvaro-snc.com
AMADA GmbH, Germany
Hall 12, Stand D06. Hall 12, Stand F06. Hall 12, Stand D02. Hall 12, Stand
F02
During EuroBLECH 2016, AMADA will present numerous highly innovative new
developments from blanking to bending and welding solutions. With these latest
technologies integrated around the "VPSS 3i" concept, AMADA provides its customers
with the highest productive solutions. AMADA will further develop its position of leader
on the sheet metal industry in general and continues to innovate in fiber laser
technologies as well as making automation and accessories for bending.
www.amada.de
AXIAL MAQUINARIA, S.L., Spain
Hall 12, Stand A35
Founded in 1994, this company is dedicated to the manufacture of press brakes and shears
for sheet metal work. At their custom built facilities in the town of Abrera (Barcelona),
they have all the technological and human resources needed to carry out the process from
the design to the manufacturing of the machinery. As a specialist in the manufacture of
high-tech machines, Axial offers significantly higher performance levels of reliability,
quality and workability. Backed by long experience in the machine tooling industry, all the
machines developed by Axial are carefully designed to give maximum performance whilst
in operation.
www.axialmaquinaria.com
[2]
BLM SPA, Italy
Hall 12, Stand B36
The LT-FREE five-axis laser cutting system is ideal for three-dimensional parts, bent,
hydroformed or pre-assembled tubes or flat and pressed sheets. Traditional cutting,
drilling, piercing, milling and deburring operations, which are normally carried out in
sequence, can now be performed on a single machine in a single cycle. The system is
equipped with a fibre laser capable of processing any type of metallic components (mild
steel, copper, aluminum, brass, stainless steel, galvanized steel, etc.) at high speed with
excellent quality.
www.blmgroup.com
B&R Industrie-Elektronik GmbH, Germany
Hall 12, Stand F51
B&R is one of the world's leading and fastest growing companies in the field of industrial
automation. Numerous customers from a wide range of industries, including many market
leaders, rely on our automation solutions. B&R is a highly skilled partner in all areas of
machine and process automation and has a global distribution network in over 75
countries. The product portfolio includes solutions for motion control, PLC and safety
applications as well as HMI and process control. We work with our customers to develop
solutions that are perfectly tailored to their unique application.
www.br-auomation.com
BS di Bazzani Daniela & C.sas, Italy
Hall 12, Stand H94
We offer machines and tools for sheet and tube processing: CNC machineries and
hydraulic or mechanical equipment for punching, drilling and tubular laser cutting. BS
offers a wide range of customized solutions to achieve productivity and flexible objectives.
Tubular punching machines can be equipped with internal, fixed or expansion matrix, to
prevent tubolar deformation. BS expresses all its experience in each solution for sheet
metal punching: from the classic punching unit “swan neck”, (equipped with BS tools
or standard tool stations A, B, C, D), to a complex punching bench, insertable into
processing lines from coil, from single workstations to the entire punching lines.
www.bspunching.com
Bystronic Laser AG, Switzerland
Hall 12, Stand B66. Hall 12, Stand A66. Hall 12, Stand A73
In what direction is sheet metal processing developing with the new impulses from
Industry 4.0 and the opportunities of digital interconnectivity? What are the advantages of
intelligent automation solutions? And what opportunities does the vision of the smart
factory offer? All these questions are key for new solutions that enable you to
manufacture your products faster and more intelligently than ever before. Visit Bystronic
at EuroBLECH. We provide you with answers and innovations relating to networked sheet
metal production. Take the next step with us towards World Class Manufacturing.
www.bystronic.com
Coastone, Finland
Hall 12, Stand D86
We offer servo electric press brakes ranging from 850mm up to 4,000mm bending length
using ball screw technology. At our stand you can find several of our C-Series machines,
which are ideal when dealing with smaller parts. For bigger parts we have our G-Series,
represented by the G40 with a bending length of 4m. It features 6 independently
controlled, servo-driven ball screws with 150 tons of bending force. These ball screws
simultaneously provide a high precision crowning. We have also brought Santa with us
from Finland, come to say hi and find out if you’ve been naughty or nice.
www.coastone.fi
[3]
COMBILIFT LTD, Ireland
Hall 12, Stand F156
Combilift is exhibiting three models from its extensive range: The Combi-WR is the first
purpose-built pedestrian reach stacker that can work in a VNA aisle of just 2.1 m and has a
lift capacity of 1.5 t. The compact and very manoeuvrable Combi-CB multidirectional
forklift in counterbalance design is ideal for handling both long and palletised loads. The
C5000XL is a robust, heavy duty 4-way forklift with high ground clearance suitable for very
tough working conditions, indoors and out.
www.combilift.com
CYBELEC SA, Switzerland
Hall 12, Stand D126
This year, we will proudly present our complete range of numerical controls, covering all
the needs of press brakes and shears manufacturers. Our CybTouch and ModEva numerical
controls will be on display in their latest evolutions, and you will get the chance to see for
yourself what we really mean by “Intuitive Programming”.
www.cybelec.ch
DANOBAT-GOITI, Spain
Hall 12, Stand B103
Come to know the latest DANOBAT's development in laser cutting: DANOBAT COIL FED
LASER CUTTING SYSTEM. DANOBAT has extended its range of fiber laser cutting products
by introducing the LB model, a system fed by metallic coils. This is a high performance
machine that combines each of the advantages provided by fiber technology applied to
laser cutting, with those derived from the use of metallic coils. LB is the most efficient
solution for your laser cutting jobs, because it obtains a considerable part reduction cost.
www.danobatsheetmetal.com/en
ERREDUE S.p.a., Italy
Hall 12, Stand H51
ErreDue S.p.A. produces and sells Nitrogen generators specifically designed to be coupled
to laser cutting plants. NitroBOX and SATURN are compact and easy solution to produce
pressurized nitrogen for laser cutting and every other application where high purity
nitrogen is needed. The main features are: high purity of up to 99.9999%; low energy
consumption and cost savings: only 3 m³ of compressed air to produce 1 m³ of nitrogen,
saving a 75% compared with traditional nitrogen generators; fully automatic: nitrogen
production is continued, without any intervention required. Maintenance is very low, and
no time is wasted on gas refilling.
www.erreduegas.it
Eurostamp srl., Italy
Hall 12, Stand C36
Eurostamp srl is an Italian company situated in Piacenza that has been producing and
selling press brake tools and equipments all around the world since the 70's. A large range
of high technology working machines, a warehouse with a large availability of tools and
the incessant investment in R&D have been allowing the company to fully satisfy its
international customers needs for many years.
www.eurostampsrl.it
Fiessler Elektronik GmbH & Co. KG, Germany
Hall 12, Stand C36
AKAS 3P is the first co-moving press brake safety system worldwide which provides high
speed operation up to the clamp point. By using the new press brake safety system AKAS
3P, it is now possible to safely operate and close a press brake at high speed to the clamp
point. The new AKAS 3P designed for the OEM manufacturers features top-level
productivity while providing maximum safety at the same time. On modern press brakes,
the closing movement in high speed until the clamp point during regular bending mode is
provided by this safety system.
www.fiessler.de
[4]
FINTEK INDUSTRY COMPANY LTD, Taiwan
Hall 12, Stand A124
Fintek Industry Company Limited provide sheet metal machines, such as hydraulic press
brakes, shearing, folding, rolling machines etc. With over 30 years of experience in the
manufacturing of machines, we have become one of the biggest company in the machine
industry in Taiwan. Dedicated to improve after-sales service and machine quality, we now
have distributors across the world, and still continually look for new market agents.
www.fintekwell.com.tw
FRESAN MAKINA SAN.TIC.LTD.STI, Turkey
Hall 12, Stand H173
FRESAN exports 70% of its total production to other countries like Germany, Poland, the
Netherlands, Portugal, Bulgaria, Hungary, Croatia, Egypt, Serbia, Spain, Russia, Slovenia,
USA etc. All FRESAN products with CE accreditation reach numerous customers all around
the world. Our manufacturing programme contains: C frame eccentric presses and
hydraulic presses from 10 tons to 250 tons (100 kN – 2,500kN), special machineries,
hydraulic punching presses, shears and plate bending machines.
www.fresan.com.tr
GIASINI SPA, Italy
Hall 12, Stand A47
GIASINI SPA is an Italian company that has been designing and realizing moulds, stamping
dies and special tools since 1962, confiding on the precious collaboration of about 40
employees. Besides the design and manufacture of thermoplastics injection moulds and
stamping dies capable of producing accurate and complex small or medium size technical
parts, we also offer services of product industrialization, co-design, experimental activities
on new materials in the field of techno polymers and special alloys, samples, spare parts,
R&D, optimization of the processes and production of mechanical accurate parts,
according to customer drawings.
www.giasini.it
Goudsmit Magnetics Group BV, Netherlands
Hall 12, Stand B153
Smooth conveying of sharp steel parts: Goudsmit Magnetics Group presents a magnetic
slide bed conveyor. These are used in the metal and sheet metal processing industry. They
offer the right solution for the smooth transport of steel parts such as: punching waste,
pressing scrap, trim waste, ball bearings, nails, turning, milling and drilling swarf and other
steel parts. Slide bed conveyors have no external moving parts such as plastic conveyor
belts. This makes them especially well suited for transporting sharp steel parts. They are
trustworthy and safe, require minimal installation space and little to no maintenance.
www.goudsmitmagnets.com
Haeger Europe BV, Netherlands
Hall 12, Stand D54
At EuroBLECH, we are introducing the 2017 model 824OneTouch, 824OneTouch LITE and
824WindowTouch, all with new software. The off-line programming platform in
combination with a renewed and improved database platform allows for faster
programming and operation. We are also introducing the 2017 model 618MSPe with the
highest cylinder speed in its class in combination with the same tooling platform as on the
WindowTouch and OneTouch models. The Haeger 618MSPe has proven to be by far the
best entry level hardware insertion and mechanical joining machine on the market.
www.haeger.com
Hezinger Maschinen GmbH, Germany
Hall 12, Stand D104
Hezinger presents a newly revised concept of a combined water plasma cutting system,
which combines both separation processes in a particularly economical manner, on a
further enlarged stand. One focus of the exhibition is devoted to the metal forming: Three
different press brake series provide proof of Hezinger's expertise. As an extension of the
conventional plasma cutting systems and abrasive waterjet cutting systems, Hezinger
shows two different scissor concepts: swing cut and scenes guillotine shear can be
weighed against each other depending on the application, and claim a direct comparison.
www.hezinger.de
[5]
HOERBIGER Automatisierungstechnik GmbH, Germany
Hall 12, Stand F125
The HOERBIGER ePrAX® control system allows energy savings of as much as 50 per cent
to be achieved, with up to 10 per cent greater performance at the same time. The
HOERBIGER ePrAX® control system is geared primarily to OEM customers seeking to
achieve a flexible stroke with an open hybrid system that combines energy efficiency and
flexibility in the design of press brakes.
www.hoerbiger.com
KBM GmbH Maschinen- und Elektrotechnik, Germany
Hall 12, Stand H104
KBM is a manufacturer of grinding machines for metalworking. This year, it is showcasing a
new automatic twin-belt grinding machine (M2S97) and a new edge deburring machine
(KEM) with automatic feeding unit. Both machines are designed for professional use, are
manufactured in Germany and offer excellent value for money. The M2S97 has a large
work area, vacuum-table and is programmable via touch screen. Please refer to the photo.
The KEM2-150 is an easy-to-use deburring machine for deburring and rounding sheet
metal edges. The edges of the metal sheets are automatically guided past the two
counter-rotating brushes, which work on the edges.
www.kbm-gmbh.com
KEMPER GmbH, Germany
Hall 12, Stand B06
The KEMPER GmbH presents innovations in the field of clean air technology. The
manufacturer is pushing labor protection towards Industry 4.0. In addition to the
established extraction and filter systems for welding applications, KEMPER shows an
innovative particle measuring system. Companies are able to verify, visualize and analyse
their particulate pollution, as well as to connect the system with CleanAirTower. In the
field of cutting, KEMPER presents the PlasmaFil Compact, a new exhaust and filtering
system with long service life of the filter for plasma cutting applications.
www.kemper.eu
KKT chillers, Germany
Hall 12, Stand H93
Cool solutions for hot applications. KKT chillers is your specialist for cooling of laser
components. Together with leading laser manufacturers, KKT chillers develops high
precision solutions in the field of laser temperature control. The portfolio of cooling
solutions covers a large range of thermal processes, such as laser cutting and laser
welding, as well as additive production processes, for example 3D printing. Basic models
and options: The modular construction of all KKT chillers products assures precisely the
cooling solutions you need. If desired, the chiller can be integrated into your existing laser
or machine housing. Simply select the suitable accessories.
www.kkt-chillers.com
KMT GmbH, Germany
Hall 12, Stand H163
At EuroBLECH 2016, KMT presents their latest development in the area of high-pressure
pumps for waterjet cutting: With the new STREAMLINE PRO-III series, the company makes
waterjet cutting more efficient – especially for the ultra-high pressure range of up to
6,200 bar. This is made possible by implementing improvements regarding the design of
the intensifier: In particular, the new SUPRAlife seal considerably improves the service life
of the pump. With the PRO-III 125 model type, KMT offers a highly efficient combination of
motor power and water pressure, which allows for the fastest waterjet cutting speeds
across the whole industry.
www.kmt-waterjet.com/kmt-waterjet-products-6200-bar_01.aspx
Kremer, Sondermann GmbH & Cie., Germany
Hall 12, Stand D03
For the past 130 years, KRESO has been producing industrial knives for all branches of a
world wide market. For our international customers, there is an offer for a wide range of
knives in different types and sizes for a lot of industrial branches. KRESO is in close touch
with a big number of machine producers and end-users to guarantee the efficient use of
industrial knives. Our production program: shear blades for cold and hotwork, billet and
bar blades, profile shear blades, crop shear blades, scrap chopper blades, scrap shear
blades, blanking tools, special knives.
www.kreso.de
[6]
LANTEK, Germany
Hall 12, Stand B104
Lantek integrates the most advanced nesting in the industry with the highest standards in
manufacturing management. Lantek provides software solutions CAD/CAM/MES/ERP for
companies fabricating sheet metal, tubes, and beams with any cutting (laser, plasma,
oxy-cut, water jet, shear) and punching technology. Today, the company has over 18,000
clients in more than 100 countries, offices in 15 countries, and a wide network of
distributors providing worldwide coverage. In 2015, its international operations provided
88% of its turnover.
www.lanteksms.com
Lasermet, United Kingdom
Hall 12, Stand H26
Lasermet’s laser safety cabin, “Laser Castle,” protects personnel from dangerous
laser beams which are absorbed by specially designed, modular wall and ceiling panels.
These class 1 cabins are tested and certified to DIN EN 60825-4 (Safety of laser products
Part 4: Laser guards) and are fully equipped with the Lasemet Interlock Control System,
automatic doors, CCTV or active filter windows called “Glaser Jailer”. The installation
of a smoke evacuation system “I-Extract” can be included, as well as the active laser
protection system “Laser Jailer” which switches off the laser in 50ms. See live
demonstrations on the stand.
www.lasermet.com/lasercastle
LVD COMPANY NV, Belgium
Hall 12, Stand F104
LVD makes smart manufacturing possible with the latest, most advanced sheet metal
working machinery and software. At EuroBLECH 2016, LVD unveils the next evolution in
adaptive bending technology, demonstrates the cutting versatility of the new Phoenix
6kW fiber laser, and debuts a high-production tube laser cutting machine that makes new
applications possible. Also demonstrated will be the new 40-ton Dyna-Press electric press
brake, Easy-Form® series press brake, ToolCell automated tool changer press brake, and
high-productivity Strippit-PX punch press featuring TOUCH-P control and LVD’s most
flexible automation system. Providing full process integration and optimized process flow
is LVD’s CADMAN® software suite.
www.lvdgroup.com
MAGGIOLINI LAME S.R.L., Italy
Hall 12, Stand A15
Maggiolini Lame srl has been manufacturing industrial knives since 1952, standard and
special ones. High output shear knives are the best choice for slitters and coils processing
machineries, the best shears to cut high resistance steel. We use 5 different materials
hardened by us to get the best hardness to grant the maximum output. We provide press
brake tools for all brands of machines; standard tools and special tools, projected,
manufactured and tested in our workshop; services of renewing shears and tools, and
consulting about automated folding process.
www.maggiolini.eu
Mate Precision Tooling, USA
Hall 12, Stand D158
Mate’s Ultra® QCT™ is a revolutionary quick change, tool-less thick turret punching
system. Designed for easier, faster setups, Ultra QCT features a simple, intuitive tool-less
punch retention mechanism. Flip the latch to remove and snap the new insert into place it’s that easy! Exclusive to Mate, SuperMax is a hard, wear resistant and lubricious
coating that acts as a barrier between the punch and sheet metal to greatly improve
stripping. In customer testing, SuperMax outperforms currently available premium
coatings by 2 to 8 times, depending on the application.
www.mate.com
MATRIX SRL, Italy
Hall 12, Stand H149
MATRIX has been manufacturing tools for punch presses and iron workers for over 25
years, investing in the best technologies. We have been continuously expanding our local
and foreign markets, becoming an important partner for our customers, thanks to the high
quality products and good value for money, but mainly thanks to our service. We grant
quick and fast deliveries in order to minimize costs. Our engineers and sales department
are available to solve any question related to manufacturing of special tools according to
the clients' needs.
www.matrixtools.eu
[7]
Maximator JET GmbH Waterjet Cutting Systems, Germany
Hall 12, Stand H132
Maximator JET systems generally differ with different bridge widths as well as various
adjusted lengths. They are divided into the product series EcoCut, PremiumCut,
PremiumCut 3D, RobotCut and MicroCut. Maximator JET can configure customized
systems for any requirements on these equipment profiles – for simple two-dimensional
cuts to pipe cutting, all the way to nestled three-dimensional robotic cutting methods.
Depending on individual needs, Maximator JET offer more than 150 individualised options
for even more choice in performance, flexibility, process reliability, ergonomics or
sustainability. Structure and price/performance allow small and medium-sized companies
to also enter into this technology.
www.maximator-jet.de/de/
MEBA Metall-Bandsägemaschinen GmbH, Germany
Hall 12, Stand B02
MEBA gives a glimpse into the company’s product variety with the MEBAsteel 1250 DG
and MEBApro 260 GP. MEBAsteel is the intelligent solution for structural steel
engineering, no matter the diverse cross sections or frequently changing miter angles.
From solid materials to structural profiles, the MEBAsteel double miter bandsawing
machines will always get the job done. The portal frame band saw, MEBApro 260GP, is a
hightech piece of equipment, meant to fit into the narrowest of spaces. With a cutting
capacity of 260 mm round or 260 x 300 mm square/flat, it covers a wide variety of parts to
saw.
www.meba-saw.de
MG S.R.L., Italy
Hall 12, Stand D104
PH line made by MG. Our variable geometry plate rolls offer many benefits: a top roll that
moves in a vertical plane, which can also be tilted and side rolls that move independently.
PH plate benders can roll super thick plates for the sectors providing infrastructure, power
generation, wind towers, ship building and vessel designs. MG variable geometry plate roll
machines can be placed in a pit so the plate material is loaded into the roll at floor level,
increasing operator safety. PH design makes coning and double coning a thing of ease,
utilizing the fixture included.
www.mgsrl.com
MÜLLER OPLADEN GmbH, Germany
Hall 12, Stand A25
MÜLLER OPLADEN is a German mechanical engineering company that can look back at
an almost century-long history since its founding in 1918. Innovative technologies,
intelligent software, robust mechanical engineering and modern design are cornerstones
of our German-made products. At our plant in Opladen we produce
3D-profile-cutting-machines for round, square and rectangular pipes and beams as well as
mechanized-welding-systems, which are employed in all segments of thermal-cutting and
welding and represent the first and the most important stage in modern production
processes.The high quality of workmanship and the many years of experience of our staff
are an assurance of integrated solutions for complex cutting and welding tasks worldwide.
www.mueller-opladen.com
MW Hydraulik GmbH, Germany
Hall 12, Stand A06
Axial Piston Hydraulic Motors are remarkable: Despite their small dimensions, they reach a
very high force density. The speed range is infinitely variable from 0 till 5,000 min.-1. Apart
from that, all motors can be equipped with a second shaft for various taco-alternators.
Also, the motors are combinable with different gear units like Helical, Helical Shaft
Mounting, Worm Gearboxes and Planetary Gearings. A hydraulic ventilated brake can be
build in front, which allows to hold loads secure.
www.mw-hydraulik.de
OMAX Corporation, USA
Hall 12, Stand H80
OMAX® Corporation is the global leader in the design and manufacturing of precision
engineered, multi-axis abrasive waterjet systems. With two product lines, OMAX and
MAXIEM® systems feature precision motion control, fast cutting speeds, and intuitive
software with system monitoring. Features include a rotary axis for tube and pipe cutting;
bevel cutting ideal for weld prep and 3D machining, and taper-free cutting. OMAX
Corporation also provides a comprehensive worldwide service and support network to
keep your machine at peak operating performance.
www.omax.com
[8]
PASS Stanztechnik AG, Germany
Hall 12, Stand D118
In order to increase the efficiency of the PRIMA-POWER punching machines, PASS
Stanztechnik AG developed a new tool for producing threads. The innovation
"ps:multi-thread" can be used as a 6-Station Multitool who is integrated in a common
Di-Station of a PRIMA-POWER punching machine. The "ps:multi-thread" is made with 6
positions. These positions can be equipped with thread form units with measurements
from M2,5 to M10. The "ps:multi-thread" can be used for sheet thicknesses of up to 8 mm
(depends on thread size). Thread forms will be covered without additional changing
efforts.
www.pass-ag.com
Plymovent GmbH, Germany
Hall 12, Stand A117
In 2016, the Plymovent Group is celebrating its 40th birthday. Plenty of new products
amplify our portfolio. Apart from a compact version of the MultiDustBank, helmets, an
improved mobile extraction, the MobilePro, and new filter cartridges, we specifically want
to mention our filtermaster, an optimized controlling system for filters.
www.plymovent.de
PRIMA POWER GmbH, Germany
Hall 12, Stand B146. Hall 12, Stand B130. Hall 12, Stand B174
“Smartly innovative” is the common denominator of all Prima Power technologies
exhibited at EuroBLECH 2016. All products feature intelligent solutions for the highest
efficiency, flexibility and connectivity to improve competitiveness in today’s fast-paced
and digital world. Prima Power showcases a complete set of laser machines for 2D and 3D
processing, including the further enhanced Laser Genius and Laser Next, now available
with the new Prima Power fiber laser; the Combi Genius for punching or laser cutting, also
equipped with Prima Power CF laser; the unique PSBB manufacturing line, advanced
solutions for servo-electric bending, and smart software applications for top efficiency.
www.primapower.com
PROFIRST GROUP - TOL COMPUTERSYSTEME GMBH, Germany
Hall 12, Stand B157
PROfirst is exhibiting a range of new modules for the first time: A new 3D designer and
unfolder for sheet metal which allows easy 3D design for occasional use, import of STEP
files and precise tooling based adjustment of bend radius and unfolding. A new web-based
calculation module will be exhibited, allowing customers to calculate the price of sheet
metal parts online. PROfirst CAM Version 10 with new features will be shown, including
contour destruction for fibre lasers. LogiTRACE Version 16 with integrated STEP export,
3D designer and unfolder will also be exhibited.
www.profirst-group.com
FRIEDRICH REMMERT GmbH, Germany
Hall 12, Stand D76
Remmert develops and produces solutions for all storage and logistics processes involving
metal sheets and long bars – ranging from the stand-alone system to the fully
integrated complete productive cell. Furthermore, the company is an expert for robot
applications, like the LaserFLEX 4.0. Remmert stands for results-oriented and
customer-oriented consultation, a strong design and development team, in addition to an
own service team and an around-the-clock helpdesk for its domestic and international
customers. Remmert offers system solutions for compact storage of sheet metals and
long bars: the BASIC Tower, the sheet metal storage system, the bridge and honeycomb
storage system.
www.remmert.de
[9]
Resato International, Netherlands
Hall 12, Stand B19
Resato is a Dutch provider of smart high pressure solutions with the aim to increase the
productivity of its worldwide customers. One of the core business areas is waterjet
cutting. We develop and manufacture our waterjet systems from table to pump in-house.
With our solutions for unmanned operation, it is possible to achieve a reliable cutting
performance 24/7. Our Job Manager, the Flex-Zone and the EMS monitoring system allow
for flexible management of cutting jobs, simple loading and unloading of the machine, and
ad-hoc performance reviews of the system. With the virtual reality in 3D, everyone at our
booth can experience waterjet cutting.
www.resato.de
RHTC bv, Netherlands
Hall 12, Stand B131
RHTC is a Dutch manufacturer and distributor of hydraulic workshop presses (both handand foot operated as motorized, known as 'Profi Press') and all different kind of hydraulic
presses, such as c-frame presses, portal presses and cambering presses. Our machines are
of the best European quality and are shown at the EuroBLECH 2016.
www.rhtc.nl
H. G. RIDDER Automatisierungs-GmbH, Germany
Hall 12, Stand F146
The company H.G. RIDDER Automatisierungs-GmbH has been manufacturing high-quality
waterjet cutting systems under the brand name WARICUT® in Germany since 1990. The
WARICUT® waterjet cutting systems are modularly designed and built completely to the
customer's needs (particularly for special requirements), no matter if it is a single or
multiple-head system with 2D and/or 3D cutting technology. The products of RIDDER are
always oriented towards reliability and persistence – ALL delivered WARICUT systems
are still in operation even today! Excellent quality features which stand for products
"Made in Germany".
www.ridder-waterjet.de
Rösler Oberflächentechnik GmbH, Germany
Hall 12, Stand F86
Rösler will be presenting a roller conveyor shot blast machine at EuroBLECH 2016 for the
first time. The Rösler paint technology is utilized for providing a preliminary or final
coating on work pieces after the blast cycle. Its primary purpose is the application of
solvent- or water-based welding primers as a temporary corrosion protection for plates
and profiles. A complete preservation line usually consists of the following system
components: part feeding and unloading systems, pre-blow-off station, pre-heater, roller
conveyor shot blast machine, automatic paint system with dust collector, paint drier with
slat conveyor and a thermal post-combustion system.
www.rosler.com
STM Stein-Moser GmbH, Austria
Hall 12, Stand H132
STM is a leading provider of waterjet cutting systems headquartered in Eben, Austria. For
more than 25 years, the service specialist have been enthusiastic about developing
sustainable production solutions, primarily for the steel, aluminum, metal, plastic, retained
composite, stone and glass industries. STM stands for quality systems that have been
developed as a modular system, unusually high customer orientation and an incomparable
passion for the technology of waterjet cutting. STM customers value ease of use and
personal advice. Cost optimization and energy savings are particularly in the focus.
www.stm.at
SUCE S.r.l., Italy
Hall 12, Stand H30
For over half a century, Suce has been planning and carrying out equipment for sheet
working: step dies, block dies, molds for alu plugs, standard as well as special punches
realized in the materials HWS_D2 , HSS_ M2 and sintered steels, coating TICN, HDP, for the
following punching machines : Trumpf, Amada, Prima Power, Euromac, Salvagnini, Murata
Wiedemann, Lvd, Danobat, Durma, Tailift, Ermaksan, Tecnology und Rainer. During next
exhibition we will show the Smart forming tool.
www.sucetool.com
[10]
SUNRISE FLUID POWER INC., Taiwan
Hall 12, Stand A137
The fully automatic CNC tables are highly efficient and accurate positioning devices to
improve your productivity. The operation of the PC-based controller is simple and easy to
learn, so you can start operating almost immediately. An offline version of the software
allows programming on your notebook from the comfort of your office. The build-in wifi,
ethernet, USB ports and the ability to import standard .dxf CAD files directly to the
controller further enhance the versatility of the machine. The hydraulic clamps with
pressure sensor for strong grip of material are standard equipment on the CNC tables.
Moreover, hydraulic stripper with exchangeable plates is also standard equipment on the
CNC tables to suit various punching operations. Ball transfer units on the support table
provide smooth movement of material, and the cover with interlock switch ensures
operation safety.
www.sunriseiw.com.tw
TEDA S.r.l., Italy
Hall 12, Stand H16
SPEEDY COMPACT PRESS BRAKES are “the” solution to all the needs for small part
bending, thanks to its ergonomic, fast and efficient way of working. It is available in 2
versions, manual and NC driven, and in 2 dimensions, 550 and 835 mm, 16 and 18 tons
respectively. The company also offers SPEED GRIP pneumatic and manual clamping
systems for press brakes, available in different versions, so as to meet all requirements.
www.teda.it
Translas BV, Netherlands
Hall 12, Stand A03
The welding torches and welding equipment from Translas are known for their
ergonomics, durability, beautiful design, performance and high quality. The newly
developed 7XE Extractor torch reduces the welder’s exposure to welding fumes by at
least 90 to 95%, as measured in the TNO Worst Case Room. The current generation of
smoke-extraction torches achieve a smoke reduction factor of 2 while the Extractor
achieves a factor of 20.
www.translas.com
UKB-Uwe Krumm Burbach GmbH, Germany
Hall 12, Stand C54
UKB is a reliable producer and supplier of press-brake tools, special tools, shear blades and
accessories. UKB is also an ideal partner for job order production: CNC-milling,
CNC-grinding, modification and regrind service. For more than 25 years, UKB has stood for
precision, tradition and responsibility and is a worldwide partner in the field of bending.
With technology of the newest generation and highly qualified staff, we provide our
customer-oriented, newly developed approach. The large press-brake tool stock at our
headquarters in Burbach allows the best possible delivery service. The field service,
test-bending, customer specific advice, optimum quality and reachability are other
important features of our “Full-service-package”.
www.ukb-gmbh.de
VANTERM MAKINA SAN. TIC. A.S., Turkey
Hall 12, Stand H34
VANTERM presents dust collectors for welding workshops and laser- / plasma-cutting
systems at EuroBLECH 2016. The filter unit, so-called AUG-Model, with its relatively low
energy consumption, has a high air capacity. It is a perfect solution for welding shops.
Thanks to its compact footprint, AUG-Model saves place in the workshop. These filter units
have a high separation degree and a long lifetime. The VANTERM mobile filter unit with
W3-IFA certificate for welding fume extraction will also be presented at the VANTERM
stand.
www.vanterm.com
[11]
Voortman Steel Machinery, Netherlands
Hall 12, Stand F66
As one of the global leaders in manufacturing CNC controlled machinery, Voortman steel
machinery supplies the most technologically advanced processing systems of the market.
Voortman offers high quality machinery for plate and beam processing industries. During
the exhibition, Voortman will be demonstrating how fabricators can reduce material
handling costs and remove labor from the fabrication process through automatic material
handling and unmanned machinery. Voortman continually develops its equipment range
for staying at the forefront of technology and in step with any new developments in the
market.
www.voortman.net
Water Jet Sweden GmbH, Germany
Hall 12, Stand F164
A new machine from the home Water Jet Sweden, the T-Model. It appears in two versions,
as T-model Standard and as T-Model Advanced. The machine is equipped with one abrasive
cutting head and a 3 x 2 meter cutting table for different media sizes. Together with our
partner, Siemens Leasing, Water Jet Sweden offer a 0% financing for the EuroBLECH 2016
exhibition. Calculated over a period of 60 months, you will get a monthly payment of
around €1809. The offer is valid for the German market and includes delivery, installation
and training.
www.waterjetsweden.com
Wheelabrator Group GmbH, Germany
Hall 12, Stand A132
Surface Technology expert Wheelabrator shows the latest machine concepts around
blasting of sheet metal and profiles, from space-saving vertical roller conveyor machines,
horizontal roll conveyor machines for steel construction and steel trading to preservation
lines for sand blasting and conservation of sheets or profiles, particularly for shipbuilding.
The Wheelabrator team demonstrates, amongst other things, latest blasting technologies
with impressive 3D holograms to “touch”. Visit us at our booth at EuroBLECH and
talk to our experts to find out how our solutions will improve your company's results.
www.wheelabratorgroup.com
WICAM GmbH Technische Software, Germany
Hall 12, Stand C44
WiCAM is a software manufacturer and developes with more than 40 employees CAD /
CAM / nesting software for automated CNC sheet metal productions worldwide. Core
competences are the ERP- / PPS-linked fully automatic control, concatenation and
optimization of bending, laser, water, plasma, flame cutting, shears, cutter, punching and
combination machines like Trumpf, Prima Power, Amada , Bystronic and many other
manufacturers. Also, WiCAM developments modules according to customer needs.
Corporations such as Siemens, Rittal, Liebherr, Thyssen-Krupp, Claas, Otis and many
medium-sized companies rely on WiCAM. Together with the customer, WiCAM comes up
with a unique overall concept based on wishes, visions and existing conditions.
www.wicam.com
WOLF-Signiertechnik Stempel-Wolf GmbH, Germany
Hall 12, Stand H146
Small character inkjet printer JET 3 up: The innovative inkjet printer among the industrial
CIJ-printers. Quickly integrated and installed, the all around high-performance printer JET
3 up is the ideal choice for all daily tasks in coding and marking of most different sheet
metal products. Pure innovation is evident in every detail of the robust printer. High-class
components, sophisticated technologies and best workmanship guarantee a maximum in
longlife and absolute reliability in the industrial use. The JET 3 up prints perfectly on all
products and surfaces and thus provides optimal production conditions with latest
technology.
www.wolf-signiertechnik.de
[12]
Zeman Bauelemente Produktions. G.m.b.H., Austria
Hall 12, Stand A104
The STEEL BEAM ASSEMBLER (SBA) is a fully automated equipment to add parts (splice
and base plates, joints and stiffeners) to steel girders. Computer-controlled robots
execute the CAD engineering drawings – extremely fast and with no errors. SIN BEAM
LINE – for a fully automatic production of “corrugated web beams”. The higher
bearing capacity offers essential weight saving (15-60%) especially for larger spans. Design
and construction of all imaginable kinds of ROLL-FORMING MACHINES complete our
portfolio. “TURN-KEY FABRICATION FACILITY" is an all-inclusive package to start a very
efficient, fully automated fabrication of light and medium weight steel constructions.
www.zebau.com
[13]