O-Ring Guide - Seal Engineering AS

Transcription

O-Ring
Guide
Content
4
Parker´s safety program
6Introduction
11 O-Ring material offering
14 Parker O-Ring compound numbering systems
15 Compound tables
15 Polyacrylate (ACM)
15 Polychloroprene Rubber (CR)
15 Ethylene Propylene Rubber (EPDM)
16 Nitril-Butadien (NBR)
17 Hydrogenated NBR (HNBR)
17 Silicone Rubber (VMQ)
17 Liquid Silicone Rubber (LSR)
18 Fluorosilicone (FVMQ)
18 Fluorocarbon (FKM)
19 High Performance Fluoroelastomers (HiFluor®)
20 Perfluoroelastomer (Parofluor®)
20 Parofluor Quantum®
21 Range of application
26Specifications
29 Deformation force
35Extrusion
37 Gland designs
38 Static seal – axial
40 Static seal – radial
42 Static seal – dovetail groove
42 Static seal – half dovetail gland
44 Dynamic seal – hydraulic
47 Sizing charts
482-xxx-sizes
533-xxx-sizes
545-xxx-sizes
556-xxx-sizes
69 O-Ring-sizes acc. to cross section d
85Parbak® Back-up ring 8-xxx sizes
89Parbak® Back-up ring other dimensions
3
O-Ring Guide
Parker Hannifin
O-Ring Division Europe
Warning – user responsibility
This document and other information from Parker Hannifin Corporation, its
subsidiaries and authorized distributors provide product or system options for
further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all
performance, endurance, maintenance, safety and warning requirements of
the application are met. The user must analyze all aspects of the application,
follow applicable industry standards, and follow the information concerning
the product in the current product catalogue and in any materials provided
from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide
component or system options based upon data or specifications provided by
the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and responsibly foreseeable uses of the components or systems.
Range of application
Our seals may only be used within the application parameters stated in our
documents as regards compatibility with contact media, pressures, temperatures and time of storage. Application or use outside of the specified application parameters as well as the selection of different compounds by mistake
may result in damage to life, the environment and/or equipment and facilities.
The information contained in our publications is based on know-how developed over decades of experience in the manufacturing and application of
seals. Despite this experience, unknown factors arising out of the practical
application of seals may considerably affect the overall applicability of this
information in such a way that the recommendations provided herein are not
to be considered generally binding.
The data for operating pressure, operating temperature, and surface speed
stated in the columns represent maximum values and are interrelated. Under
extreme working conditions it is recommended not to use all maximum values
simultaneously.
For special requirements (pressure, temperature, speed, etc.) please contact
our consultancy service, so that suitable materials and/or designs can be recommended.
Compatibility of seals and operating media / cleaning agents
Due to the great diversity of operational parameters affecting fluidic devices
and their impact on seals, it is absolutely imperative that manufacturers of
these devices approve seals for functional and operational suitability under
field conditions.
Furthermore, in view of the consistent increase of newly available media used
as hydraulic oils, lubricants, and cleaning agents, special attention is invited to
the aspect of compatibility with sealing elastomers currently in use.
Additives contained in base media in order to enhance certain functional characteristics may affect compatibility characteristics of sealing materials.
For this reason, it is imperative that any product equipped with our seals be
4
O-Ring Guide
Parker Hannifin
tested for compatibility with operational media or cleaning agents approved
or specified by you either at your plant or by means of field tests prior to any
serial application.
We kindly ask you to comply with this notice since, as a manufacturer of seals,
we are not in a position, as a matter of principle, to perform simulations regarding any and all conditions present in the final application nor of knowing
the composition of the operational media and cleaning agents used.
Design modifications
We reserve the right to make design modifications without prior notification.
Prototypes and samples
Prototypes and samples are produced from experimental moulds. The subsequent series production may differ in production techniques from the prototype production unless specific agreement to the contrary was reached
beforehand.
Delivery and services
The delivery guarantee (availability of moulds) for individual dimensions of our
range of products is limited to a period of 7 years.
Damaged moulds, including standard items, can only be replaced in case of
sufficient demand. Most of the dimensions stated in this catalogue are normally (but not as a matter of course) available ex stock.
For the production of smaller quantities, special compounds, and in case of
special production procedures, we reserve the right of charging a prorated
share of set-up costs.
All deliveries and services are subject to our terms.
Quality systems
Our manufacturing sites are certified according to ISO 9001 resp. ISO/
TS 16949.
Copyright
All rights reserved by Parker Hannifin Corporation. Extracts may only be taken
with permission. Modification rights reserved.
Validity
This edition supersedes all prior documents.
5
O-Ring Guide
Parker Hannifin
Introduction
Sealing technology by Parker-Prädifa
The Seal Group of the Parker Hannifin Corporation is a worldwide leader in the
development, production and sale of sealing systems, vibration dampers, EMI
shielding systems and thermally conductive materials.
Quality assurance
In the O-Ring Division’s world-class facilities, skilled Parker technicians manufacture O-Rings to exacting standards. From in-house mixing and tooling
operations to the final non-contact inspection process, state-of-the art technology is employed to provide unparalleled material consistency and dimensional control. Quality registrations are maintained to ensure superior product
performance and process repeatability.
Research and development
Based on decades of experience in a wide range of markets Parker develops
tailored sealing solutions for virtually any application. Parker’s sealing experts
can draw on an extensive network of R+D laboratories around the globe.
State-of-the-art materials, high-end manufacturing technology and designs
that are perfectly tailored to the specific application result in products and
solutions that have one aim in mind: the full satisfaction of our customers
and partners.
Computer simulation
Parker-Prädifa uses the Finite Elements Method to develop and optimise sealing systems. Particularly elastomer materials with their non-linear properties
cannot be described strictly by using standard software. Therefore, Parker-Prädifa has developed
proprietary mathematical models to describe
the complex material properties and special
measuring methods to capture the relevant
material parameters.
Computer simulation allows experts to detect
weak areas as early as in the concept phase and
to optimise materials or geometries. This saves development time and costs.
6
O-Ring Guide
Parker Hannifin
Introduction
Introduction
Literature
The Parker O-Ring Handbook has been a standard
reference work used by seal designers for decades.
It contains comprehensive information about the
properties of the most important sealing elastomers,
typical O-Ring application examples, examples of
statically acting seal designs plus descriptions of
conditions that may lead to O-Ring failure. In addition, the handbook contains an overview of international dimensions and standards as well as media
compatibility data for fluids, gases and solids.
O-Ring Handbuch
O-Ring Handbook
Materials
Tailored materials require tailored compounding processes. Therefore, Parker
produces its rubber mixtures and polymerises its thermoplastic materials
in-house. The portfolio of materials
developed and produced by Parker
ranges from compounds for extremely
low temperatures down to -60 °C (silicones) to very high temperatures up to
+320 °C (Parofluor). Parker offers the
appropriate compound for the specific
application requirements including excellent resistance against aggressive
chemicals. With excellent extrusion
and abrasion resistance Parker’s proprietary polyurethane line is suitable for an extremely extensive application
range and continually new uses.
Product lines
Parker manufactures O-Rings and special moulded parts for automotive engineering, the chemical and bio-chemical
industries, fluid power, refrigeration
and air conditioning technology, the
petroleum sector, aerospace, the semiconductor industry and many other industrial sectors.
7
O-Ring Guide
Parker Hannifin
Introduction
O-Rings
O-rings are manufactured according to metric and imperial international
standards such as AS 568B, DIN ISO 3601 and JIS. Custom sizes of almost
any dimension are possible such as miniature O-rings, special O-rings with
large dimensions, as continuously moulded and spliced cord.
O-Ring kits
The handy carrying case with O-Rings is ideally suited for
repairs, assembly jobs and workshops, and finally puts an
end to the search for the right O-Ring.
Parker offers it in various versions: with O-Rings in
selected imperial and metric standard dimensions
and appropriate materials or with customised content. Compact, well arranged and always within
reach, the kit provides the appropriate materials for quick
use.
Accessories
Products to assist O-Ring users include
assembly greases and lubricants, sizing
cones and extraction tools.
Parbak® Back-up rings
Parbak® Back-up rings prevent extrusion in high-pressure applications, help
to maintain the lubricant film and thus prolong the service life of O-Rings.
The Parbak® numbers correspond to the size designations of the 2-xxx series
of the Parker O-Rings they are installed with (e.g. 8-211, N 300-90 fits O-Ring
2-211, N 674-70).
8
O-Ring Guide
Parker Hannifin
ParCoat® Coating
O-Rings with ParCoat® coatings can be assembled with low exertion of force
using automatic equipment. The rings will not stick together during the feeder
process. Prior to installation they can be elongated by over 150 % without
causing the anti-friction coating to burst or crack.
Benefits
•Clearly reduced frictional forces
•No damage to seals during installation or assembly
•Faster, more cost-efficient assembly process
•Reduction of gaspermeability
•Seals will not stick together in automatic feeding processes
•No soiling or contamination
•Translucent ParCoat® treated O-Rings insures no risk of mix-ups as basic
elastomer compound colour remains visible
•Elongation capacity above 150 %, depending on type
•Suitable for nearly all standard elastomer types (for LSR not all coatings
applicable)
•In different colours available
9
O-Ring Guide
Parker Hannifin
Introduction
Introduction
10
O-Ring Guide
Parker Hannifin
O-Ring material offering
Parker O-Ring compounds are formulated to meet the most stringent industry
standards, including FDA, USP, KTW, DVGW, BAM, WRAS (WRC), NSF, Underwriters Laboratories (UL), Aerospace (AMS) and many customer-specific
requirements.
11
O-Ring Guide
Parker Hannifin
Compounds
O-Rings can be molded in a wide range of compounds in hardnesses from
40 to 90 Shore A. These materials include:
•Polyacrylate (ACM)
ACM (acrylic rubber) has good resistance to mineral oil, oxygen and ozone.
The water compatibility and cold flexibility of ACM are considerably worse
than those with NBR.
•Polychloroprene Rubber (CR)
Also known by the tradename Neoprene, polychloroprene was the first synthetic rubber and exhibits generally good ozone, aging, and chemical resistance. It has good mechanical properties over a wide temperature range.
•Nitrile-Butadiene (NBR)
Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene terpolymer. The acrylonitrile content of nitrile sealing compounds varies considerably (18 to 50 %). Polymers with higher ACN content exhibit less swell
in gasoline and aromatic solvents, while lower ACN polymers exhibit better compression set and low temperature flexibility. Polymer is also called
Buna-N.
•Hydrogenated NBR (HNBR)
Hydrogenated NBR was developed as an air-resistant variant of nitrile rubber. In HNBR, the carbon-carbon double bonds in the main polymer chain
are saturated with hydrogen atoms in a process called “hydrogenation” that
improves the material’s thermal stability and oxidation resistance.
•Ethylene Propylene Rubber (EPDM)
EPDM is a terpolymer of ethylene, propylene, and a diene third monomer
used for cross-linking.
•Silicone Rubber (VMQ)
Silicone elastomers have relatively low tensile strength, poor tear and wear
resistance. Silicones also possess good insulating properties and tend to be
physiologically neutral.
•Fluorosilicone (FVMQ)
Fluorosilicone is a silicone polymer chain with fluorinated side-chains for
improved oil and fuel resistance. The mechanical and physical properties are
very similar to those ofsilicone.
•Liquid Silicone Rubber (LSR)
Liquid Silicone Rubber (LSR) offer great advantage producing efficient high
quantity silicone parts. Flash less production gives opportunities for difficult
molded shapes. I.E. for fastidious medical or automotive applications.
12
O-Ring Guide
Parker Hannifin
•Fluorcarbon (FKM)
Fluorocarbon (FKM) has excellent resistance to high temperatures and a
broad range of chemicals. Permeability and compression set are excellent.
As a high-performance fluoroelastomer, Hifluor® offers chemical stability
comparable to perfluoroelastomers (FFKM) in nearly all media.
Particularly in polar solvents, Hifluor® exhibits major advantages over conventional FKM polymers.
HiFluor® offers a wide range of application solutions in all industrial sectors. From conventional O-rings in standard (imperial and metric) dimensions through to diaphragms and moulded engineering parts according to
customers’ drawings, the compound can be processed in rubber-metal
composites as well.
•Parofluor® (FFKM)
The Parofluor® range consists of advanced perfluorinated elastomers
(FFKMs) exclusively developed and produced by Parker Hannifin. They
are carried under the trade names of Parofluor® and Parofluor Quantum®.
Compared with other perfluorinated elastomers Parofluor® compounds offer
outstanding retained resiliency as they have been developed specifically for
extremely challenging sealing applications.
13
O-Ring Guide
Parker Hannifin
•HiFluor® (FKM)
Parker O-Ring compound numbering systems
Note: There are two types of nomenclature used to reference Parker O-Ring
products. See tables below for description of these types.
Type I:
N 0674 -70
Hardness (Shore A)
Sequence Number
Polymer-Code
A Polyacrylate
C Neoprene (Chloroprene)
E Ethylene Propylene
L Fluorosilicone
N Nitrile (Buna N) and HNBR
S Silicone
V Fluorocarbon, HiFluor®, Parofluor™
14
O-Ring Guide
Parker Hannifin
Compound tables
Compound Hardcode
ness
(Shore
A)
Colour
Temp.
Properties / applications
range (°C)
static
A3872-70
-70±5
black
-20 +150 Euro standard compound
A8531-80
-80±5
black
Polychloroprene Rubber (CR)
C0557-70
-70±5
black
C0944-70
C3721-70
-70±5
-70±5
red
black
Standard; good aging and salt water resist-40 +100 ance; often used in refrigerant (e.g. R 134a
or R22)
-40 +100 Col-O-Ring compound
Ethylene Propylene Rubber (EPDM)
E0529-60
60±5
black
E0540-801)
80±5
black
E3609-70
70±5
black
E3678-80
±5
80
violet
E3704-70
70±5
black
E3804-90
E3809-80
90±5
80±5
black
black
E8556-70
70±5
black
E8743-70
70
black
1)
±5
-50 +150 Standard
Global standard compound; good compression set; steam to 200 °C, hot water, air to
-50 +150 150 °C, diluted acids; fire-resistant hydraulic
fluids with phosphateester base; brake fluids
with non-mineral oil base
Global standard compound; EN 681-1
-50 +150
approval
-50 +150 Col-O-Ring compound
For industrial cooling water applications; Euro
-50 +150
standard compound
-50 +150 Standard; Parbak® compound
For industrial cooling water applications;
-50 +150
improved aging resistance
-50 +150 FDA-compound, for food application
bold printed compounds are 2-xxx standard and available ex-stock.
The temperature ranges given are only valid where elastomer medium compatibility is absolute.
Recommendations in the column remarks / applications on application design and material selection are based on available technical data and are offered as suggestions only. Each user should
make his own tests to determine the suitability for his own particular use. Parker offers no express
or implied warranties concerning the form, fit, or function of a product in any application.
15
O-Ring Guide
Parker Hannifin
O-Ring
Dichtungswerkstoffe
material offering
Polyacrylate (ACM)
Compound Hardness
code
(Shore
A)
Colour
Temp.
range (°C)
static
Ethylene Propylene Rubber (EPDM)
E8780-80
80±5
black
E8790-70
70±5
black
Standard for drinking water application with
-50 +150 KTW, W 270, EN 681-1, W 534, Ö-Norm,
B-5014-1 approval
Standard for drinking water application with
-50 +150 KTW, WRAS, W 270, EN 681-1, W 534, KIWA,
NSF 61, Ö-Norm, B-5014-1 approval
Nitril-Butadien (NBR)
1)
N0525-60
60±5
black
-35 100
Standard
1)
N0552-90
90±5
black
-30 100
N0674-701)
70±5
black
-35 100
N3505-50
50±5
black
-35 100
N3575-75
±5
75
black
-50 100
N3578-80
80±5
black
-40 100
Standard
Global standard compound; generally
suited for hydraulic and pneumatic systems;
compatible with hydraulic oil, water/glycol
(HFC fluids) and oil in water emulsions (HFA);
animal, mineral and vegetable oils, fuels,
heavy oil
Improved ozone and weather-proof resistance
Low temperature NBR with improved
oilresistance
Standard
N3593-70
70±5
black
-30 100
Euro standard compound
N3594-50
50±5
black
-30 100
N3596-60
60±5
black
-30 100
N3597-70
70±5
black
-30 100
N3598-80
80±5
black
-30 100
N3599-90
90±5
black
-30 100
N8676-70
70
black
-35 100
Improved ozone resistance; Euro standard
compound
±5
16
O-Ring Guide
Parker Hannifin
Compound Hardness
code
(Shore
A)
Colour
Temp.
range (°C)
static
N3510-85
85±5
black
-35 +150 Standard
N3512-90
90±5
-35 +150 Standard
N3554-75
75
N3573-75
75±5
black
lightgreen
black
N3723-80
80±5
black
N3813-70
70±5
black
-40 +150 Low temperature
N3831-70
70±5
black
N3837-85
85±5
green
N8505-70
70±5
green
N8570-60
60
black
-35 +150 Standard
Suitable for Biodiesel (RME) applications up
-35 +150
to +80°C
N8680-90
90±5
black
N8888-70
70±5
yellow
±5
±5
-35 +150 Standard
-35 +150 Standard
-40 +150 Low temperature HNBR
Compound for gas- and water application
-35 +150
with EN 549, EN 681-1 approval
Silicone Rubber (VMQ)
S0595-50
50±5
red
S0604-70
70±5
red
S0613-60
60±5
red
-55 +200 Standard
Global standard compound; Col-O-Ring
-55 +200 compound; hot air (to 210°C), oxygen, water
(to 100°C); only suitable as static seal
-55 +200 Standard
S0614-80
80±5
red
-55 +200 Global standard compound
Liquid Silicone Rubber (LSR)
1)
S3693-50
50±5
S3695-60
60±5
S3697-40
40±5
S3698-70
70±5
reddish
brown
reddish
brown
reddish
brown
reddish
brown
-50 +200 Standard
-50 +200 Standard
-50 +200 Standard
-50 +200 Standard
17
O-Ring Guide
Parker Hannifin
Hydrogenated NBR (HNBR)
Compound Hardcode
ness
(Shore
A)
Colour
Temp.
range (°C)
static
Fluorosilicone (FVMQ)
L0677-70
70±5
blue
L0806-80
80±5
blue
L3355-70
70
L8559-70
70±5
blue
L8585-80
80±5
blue
±5
yellow
Col-O-Ring compound; for high temperature,
good low temperature recistance; mostly fitted where fuel and oil resistance is important,
e.g. in aircraft
Approvals for military and aerospace
-60 +170
applications
-60 +170
-60 +170
-60 +170 Standard
Standard; approvals for aerospace applica-60 +170
tions
Fluorocarbon (FKM)
V0709-90
90±5
black
V0747-751) 75±5
black
V0763-60
60±5
brown
V0884-75
75±5
brown
V0894-90
90±5
brown
-25 +200 Standard
Global standard compound; for high temperatures; hot oil; many chemicals; fireresistant fluids
-25 +200
with Phosphate-Ester and Chlorinatedhydrocarbon base; Copolymer
-25 +200
V3642-75
±5
75
black
-25 +200 Col-O-Ring compound; Copolymer
Col-O-Ring compound; medium compatibility
-25 +200
like V0747-75
-25 +200 Terpolymer
V3670-70
70±5
black
-25 +200
V3681-80
80±5
green
-25 +200
V3701-70
70±5
green
V3736-75
75
black
V3738-75
75
black
Terpolymer; improved low temperature
-28 +200
resistance
-20 +200 Improved medium compatibility
V8521-75
75±5
red
V8592-75
75±5
blue
V8688-75
75
black
-40 +200 Low temperature FKM
Low temperature FKM with improved chemi-35 +200
cal resistance
1)
±5
±5
±5
The temperature ranges given are only valid where elastomer medium compatibility is absolute. Recommendations in the column remarks / applications on application design and material selection
are based on available technical data and are offered as suggestions only. Each user should make
his own tests to determine the suitability for his own particular use. Parker offers no express or
implied warranties concerning the form, fit, or function of a product in any application.
18
O-Ring Guide
Parker Hannifin
Compound Hardcode
ness
(Shore
A)
Colour
Temp.
range (°C)
static
Fluorocarbon (FKM)
75±5
black
V8722-75
75±5
black
V8750-70
70±5
black
Improved low temperature resistance; suitable for Biodiesel (RME) applications
Improved resistance against water/glycol
-25 +200
and acids
-25 +200 FDA-compound, food application
-30 +200
High Performance Fluoroelastomers (HiFluor®)
V3819-75
75±5
black
V8534-90
90±5
black
V8730-70
70±5
white
V3852-65
65±5
black
V8558-75
75±5
green
1)
Extremely low compression set at cyclical
-25 +250 temperatures; excellent availability in Parker
standard dimensions
Improved resistance to explosive decom-25 +250 pression and gap extrusion; off-shore and
petrochemical applications
Food industry applications; meets FDA CFR21
NR. 177.2600 requirements; particularly
-25 +250
suitable for use with high processing temperatures and aggressive media
Preferably used for moulded functional com-25 +250
ponents and membranes/diaphragms
-25 +260 For high temperatures
The temperature ranges given are only valid where elastomer medium compatibility is absolute. Recommendations in the column remarks / applications on application design and material selection
are based on available technical data and are offered as suggestions only. Each user should make
his own tests to determine the suitability for his own particular use. Parker offers no express or
implied warranties concerning the form, fit, or function of a product in any application.
19
O-Ring Guide
Parker Hannifin
V8703-75
Compound Hardcode
ness
(Shore
A)
Colour
Temp.
range (°C)
static
Perfluor-Elastomer (Parofluor®)
V8920-75
75±5
black
-15 +260
V8545-75
75±5
black
-15 +300
V8562-75
75±5
white
-15 +300
V8921-75
75±5
white
-15 +300
V8588-90
±5
90
black
-15 +260
V3734-70
70±5
black
-15 +320
V8930-75
75±5
black
-15 +325
V8931-75
75±5
black
-15 +310
V8950-75
75±5
black
-15 +240
V8951-75
75±5
white
-15 +240
Standard; good resistance in hot water; for
wet processes in semiconductor applications
Global standard; best compound for hot water
and steam applications
Global standard; for high temperatureplasma-applications; dry applications in
semiconductor industries
Pure compound for sterile and pharmaceutical technology, for oxidising media
ED-resistant, Norsok M-710
Parofluor®; for low temperatures; for
aerospace
For high temperatures; not recommended for
hot aliphatic amine and water steam
For high temperatures; for hot aliphatic amine
and water steam
FDA, for food industry; pharmacy and
biotechnology
FDA, USP Class VI for pharamacy, biotechnology und medical technology
Parofluor Quantum®
V8910-75
75±5
black
-20 +220 Improved chemical resistance
V8911-75
75±5
white
-20 +220 Improved chemical resistance
V8787-75
75±5
black
-20 +230 Optimized paint, varnish and solvent stability
V8844-75
75±5
white
-20 +230 Optimized paint, varnish and solvent stability
1)
20
O-Ring Guide
Parker Hannifin
Range of application
V0884-75
Gasoline/alcohol blends
Naptha or kerosene
MPS gas
MFG or natural gas
Diesel fuel, fuel oil,
lubricating oil
Heated fuel oil
Anhydrous ammonia
LP-gas
A
B
C
D
E
F
G
H
I
J

















Compounds for gas supply and appliances
The following Parker Hannifin compounds are approved by the German
Association for Gas and Water (DVGW) for the applications listed:
Parker
compound
V0747-75
Polymer
Colour
Standard
FKM
black
DIN 3535, Part
N0552-90
NBR
black
DIN EN 549
N0674-70
NBR
black
DIN EN 549, VP 406
N3506-70
NBR
black
DIN EN 549
N3578-80
NBR
black
DIN EN 549
N3829-70
NBR
black
DIN EN 549
N8888-70
HNBR
yellow
DIN EN 549, VP 406, VP 614
S3698-70
VMQ
red
DIN EN 549
V0747-75
FKM
black
DIN EN 549
V0884-75
FKM
brown
DIN EN 549
21
O-Ring Guide
Parker Hannifin
V0747-75
Gasoline
Compound
code
N0674-70
Fire extinguishing
agents
Underwriters laboratories approved services
Compounds for food industry
Compounds which are to be used in contact with foodstuffs must comply
with the law. The German Federal Institute for Risk Assessment (BfR) has
defined the type of substances which are not harmful to health and the
permissible migration or leaching.
According to BfR recommendation no. XXI, rubber parts are devided into
4 classes and a special category according to the period of time in contact
with the foodstuff.
Silicone is suitable for these applications because of its physiological properties. It is inert, taste and odourfree.
The FDA (Food and Drug Administration, USA) has a list of allowable substance similar to the BfR list which are non-toxic or carcinogenic. Additionally
the FDA requires extraction tests which are carried out by the manufacturer.
Parker compound Polymer
Colour
Standard
EJ590-70
EPDM
white
FDA + USP, classVI
EJ595-70
EPDM
white
FDA + USP, classVI
E3609-70
EPDM
black
FDA
E8743-70
EPDM
black
FDA
E8790-70
EPDM
black
FDA + BfR
E8780-80
EPDM
black
FDA + BfR
S3697-40
LSR
reddish brown
FDA + BfR
S3693-50
LSR
reddish brown
FDA + BfR
S3695-60
LSR
reddish brown
FDA + BfR
S3698-70
LSR
reddish brown
FDA + BfR
V8750-70
FKM
black
FDA
V8722-75
FKM
black
FDA
V8730-70
HiFluor®
white
FDA
V8950-75
FFKM
black
FDA
V8951-75
FFKM
white
FDA + USP classVI
22
O-Ring Guide
Parker Hannifin
KTW approved compounds
KTW:
KTW is the nationally recognized standard for all devices, components and
materials which contact drinking water. In addition to Germany (KTW), Great
Britain (WRAS), the USA (NSF61), France (ACS) and the Netherlands (KIWA)
have published their own regulations for these applications.
Parker’s O-Ring Division has developed several materials that are certified
to KTW.
Parker
Compound
Polymer
E1549-70
EPDM
Watercontacttemperature
90°C
Colour Standard
black
85°C
WRAS
82°C
E8780-80
EPDM
90°C
NSF 61
black
E8790-70
EPDM
90°C
HNBR
KTW, W270, Ö-Norm B5014-1
EN 681-1, W 534
black
KTW, W270
85°C
WRAS
90°C
KIWA, Ö-Norm B5014-1
82°C
NSF 61
N8888-70
KTW
-
EN 681-1, W 534
yellow EN 681-1, EN 549
23
O-Ring Guide
Parker Hannifin
Sealing compounds for use in drinking water and heating applications are
subject to a large number of approval regulations designed to ensure their
harmlessness from the stage of water extraction, treatment and transport
through to the consumer’s tap. Worldwide, almost all countries have issued
their own drinking water regulations including specific tests and lists of approved ingredients. The regulations are complemented by physical and microbiological examinations.
Aerospace materials
The aerospace industry demands the most from elastomeric compounds.
Special materials often must be developed to meet specification requirements.
Additionally many special requirements must be met during the production of
finished parts, not least to meet safety, technical and quality requirements.
AMS1) and NAS2) rubber specification descriptions
1)
2)
Rubber
specifications
Parker
Hardness Description title
compound (Shore A)
AMS3201
N0545-40
35-45
Dry heat resistance
AMS3205
N0299-50
45-55
Low temperature resistance
AMS3208
C0267-50
45-55
Weather resistant; chloroprene type
AMS3209
C1124-70
65-75
Weather resistant; chloroprene type
AMS3212
N0525-60
55-65
Aromatic fuel resistant
AMS3220
N0525-60
55-65
General purpose; fluid resistant
AMS3238
B0318-70
65-75
Phosphate-ester resistant; butyl type
AMS3301
S0469-40
35-45
Silicone; general purpose
AMS3302
S0595-50
45-55
AMS3303
S0613-60
55-65
AMS3304
S1224-70
S0604-70
65-75
AMS3305
S0614-80
75-85
AMS3325
L1223-60
LM152-60
55-65
Fluorosilicone rubber; fuel and oil resistant
AMS3337
S0383-70
65-75
Silicone; extreme low temperature resistant
AMS3345
S0899-50
45-55
Silicone rubber
AMS3357
S1224-70
S0604-70
65-75
Silicone rubber; lubricating oil; compression
set resistant
AMS7257
V8545-75
FF200-75
70-80
Sealing rings; perfluorocarbon; high temperature resistant
AMS7259
V0709-90
85-95
High temp.; fluid resistant; very low compression set FKM
AMS7267
S0355-75
70-80
Silicone; heat resistant; low
compression set
AMS7271
N0506-65
60-70
Fuel and low temperature resistant
Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.
National Aerospace Standard issued by Aerospace Industries Association of America, Inc.
24
O-Ring Guide
Parker Hannifin
1)
2)
Rubber
specifications
Parker
Hardness Description title
compound (Shore A)
AMS7272
N0287-70
65-75
Synthetic lubricant resistant
AMS7276
V1164-75
V1226-75
V0747-75
70-80
High temperature fluid resistant; very low
compression set FKM
NAS1613
E1267-80
75-85
Packing; O-Ring; phosphate ester resistant
AMS-P-5315
N0602-70
65-75
Packing; O-Ring; hydrocarbon fuel resistant
AMS-P-5510
N0507-90
85-95
Gasket; straight thread tube fitting boss
AMS-R-6855
N0406-60
C1124-70
55-75
Synthetic rubber sheets; strips; molded or
extruded shapes; synthetic oil resistant
AMS-R-7362
47-071
65-75
Rubber; sheet; molded and extruded
shapes; synthetic oil resistant
AMS-P-25732
N0304-75
70-80
Packing; preformed; petroleum hydraulic
fluid resistant; limited performance
AMS-R-25988
L1223-60
L1120-70
L1218-80
L1077-75
LM152-60
LM153-70
LM154-75
LM155-80
55-85
Rubber; fluorosilicone elastomer; oil and
fuel resistant
AMS-R-83248
V1164-75
V1226-75
V0747-75
V0709-90
70-95
Rubber; fluorocarbon elastomer; high temperature fluid and compression set resistant
AMS-P-83461
N0756-75
70-80
Packing; preformed; petroleum hydraulic
fluid resistant; improved performance
AMS-R-83485
V0835-75
70-80
Rubber; fluorocarbon elastomer; improved
performance at low temperatures
Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.
National Aerospace Standard issued by Aerospace Industries Association of America, Inc.
25
O-Ring Guide
Parker Hannifin
Specifications
Airbus Nord-Sud Aviation (NSA)
Specification
Parker compound
Description
NSA 5512
NSA 8200
NSA 8201
NSA 8202
NSA 8203
NSA 8204
NSA 8205
NSA 8206
NSA 8207
NSA 8213
NSA 8216
NSA 8218
NSA 8671
Special
L8585-80
E1267-80
C3645-80
L8585-80
E1267-80
C3645-80
S0604-70
S0604-70
E1267-80
E1267-80
E1267-80
W5036
Bonded seal
Sizes 3-xxx
Sizes 3-xxx
Sizes 3-xxx
Sizes 2-xxx
Sizes 2-xxx; NAS 1613; color code
Sizes 2-xxx
Sizes 2-xxx
Sizes 3-xxx
Square ring
Square ring
Square ring
Square ring; PTFE
Norme Française (NF), (french standard)
Specification
Parker compound
Category
NF L17-120
NF L17-241
NF L17-160
NF L17-160
NF L17-164
NF L17-161
NF L17-261
NF L17-261
NF L17-250-4
N0674-70
E1267-80
V3642-75
V0709-90
V0747-75
L3747-60
L8585-80
L1218-80
S0604-70
20A7
41B8
60C7
60C9
64C8
61D6
61D8
61D8
EN 2261
26
O-Ring Guide
Parker Hannifin
Specification
Parker compound
5.5440
5.5502
5.5600
5.5601
5.5602
5.5603
5.5612
5.5627
5.5629
5.5655
5.5688
5.5701
5.5702
5.5703
5.5704
5.5707
5.5709
5.5710
5.5801
5.5802
5.5804
5.5808
5.5810
5.5813
5.5814
5.5829
5.5855
C0365-45
S0595-50
E0529-65
N0406-60
N0239-60
S0613-60
N0406-60
N0261-65
N0525-60
N0406-60
L3747-60
V0747-75
N0674-70
S0604-70
V3670-70
B3688-70
C0557-70
L0677-70/L8559-70
N3578-80
E0540-80
V0747-75
V0709-90
N0552-90
L0806-80
S0614-80
N0755-80
N3518-80
Compound-Datasheet (WL)
27
O-Ring Guide
Parker Hannifin
28
O-Ring Guide
Parker Hannifin
Deformation force
The following charts are included to facilitate engineering analysis. Additional information is available in the Parker O-Ring Handbook.
Deformation force
Deformation force
The force necessary to deform an O-Ring cross-section by a given amount (in
percent) is related to the compound modulus and O-Ring geometry. Normally
the user knows the compound hardness and the deformation in percent, the
following diagrams show the relationship between hardness, deformation and
cross-section. The range of loads given in the diagrams refers to all elastomers.
The forces required to deform elastomers during assembly can be estimated
from the diagrams and the force imparted to the metal, aluminium or plastic
gland faces also can be obtained.
29
O-Ring Guide
Parker Hannifin
1)
10
20
30
30
50
60
70
80
90
50
60
70
80
90
50
60
70
80
90
1
Hardness
(Shore A)
2
3
5 6 7 8 910
20
30
50
100
1)
Force to derform cross section (N/cm)
4
d2 = 1.80 mm
200
500
1000
Compression load charts
O-Ring deformation (%)
Length in cm of O-Ring circumference
O-Ring Guide
Parker Hannifin
1)
10
20
30
31
50
60
70
80
90
50
60
70
80
90
50
60
70
80
90
1
Hardness
(Shore A)
2
3
5 6 7 8 910
20
30
50
100
1)
O-Ring Guide
Parker Hannifin
Deformation force
Force to derform cross section (N/cm)
4
d2 = 2.65 mm
200
500
1000
1)
10
20
30
32
50
60
70
80
90
50
60
70
80
90
50
60
70
80
90
1
Hardness
(Shore A)
2
3
5 6 7 8 910
20
30
50
100
Force to derform cross section (N/cm)1)
4
d2 = 3.55 mm
200
500
1000
O-Ring Guide
Parker Hannifin
1)
10
20
30
33
50
60
70
80
90
50
60
70
80
90
50
60
70
80
90
1
Hardness
(Shore A)
2
3
5 6 7 8 910
20
30
50
100
O-Ring Guide
Parker Hannifin
Deformation force
4
d2 = 5.30 mm
200
500
1000
1)
10
20
30
34
50
60
70
80
90
50
60
70
80
90
50
60
70
80
90
1
Hardness
(Shore A)
2
3
5 6 7 8 910
20
30
50
100
4
d2 = 7.00 mm
200
500
1000
O-Ring Guide
Parker Hannifin
Extrusion
600
Diagram for
selection of
O-ring hardness static seal
400
300
100
Extrusion
80
60
Deformation force
Working pressure (bar)
200
40
No
Extrusion
30
20
Hardness
(Shore A)
80
70
90
10
8
0,1
0,2
0,3
0,4
0,5
0,6
0,7
0,8
0,9
1,0
Total diameteral play (mm)1)
Basis for curves
•100,000 pressure cycles at the rate of 60 per minute from zero to the indicated pressure.
•Maximum temperature (i.e., test temperature) 70°C.
•No back-up rings.
•Total diametral clearance must include cylinder expansion due to pressure.
•Apply a reasonable safety factor in practical applications to allow for excessively sharp edges and other imperfections and for higher temperatures.
1)
Reduce the clearance shown by 60% when using silicone or fluorosilicone elastomers.
35
O-Ring Guide
Parker Hannifin
36
O-Ring Guide
Parker Hannifin
Gland designs
The following charts are included to facilitate engineering analysis. Additional information is available in the Parker O-Ring Handbook.
Parker offers O-Rings for use in static as well as dynamic sealing applications.
Static seals are those where the mating parts of the gland do not have movement relative to each other. These seals include face, radial, dovetail. Examples of these seals and the corresponding design charts are found on the
following pages. Dynamic seals include reciprocating, floating pneumatic,
oscillating, and rotary applications. Dynamic seals are defined by one of the
gland parts having movement relative to the other part. Gland design recommendations for a reciprocating seal are provided also in this chapter.
Gland designs
For further design assistance and recommendations contact a Parker O-Ring
applications engineer.
37
O-Ring Guide
Parker Hannifin
Gland designs
Static seal – axial
The O-Ring is deformed in the axial direction. Under pressure the O-Ring is
subjected to a relative movement, it is important to note the pressure direction.
•If pressure acts from inside, then the O-Rings outside diameter should be
in contact with the gland outside diameter (optimally compressed between
1 and 3 % of circumference).
h+ 0 . 1
B
A
r2
r1
0° to 5°
B
b
O d7 H 11
Pressure from
inside
•If pressure acts from outside, then the O-Rings inside diameter should be in
contact with the internal diameter of the gland (up to 6 % stretched).
h+ 0 . 1
B
A
Pressure from
outside
0° to 5°
B
r1
r2
b
O d8 H 11
38
O-Ring Guide
Parker Hannifin
Gland designs
Surface roughness – static seal
Surface
Pressure
Surface roughness in μm,
load area tp > 50 %
Ra
Rmax.
A Contact area
non-pulsating
1,6
A Contact area
pulsating
0,8
6,3
B Gland diameter and sides
non-pulsating
3,2
12,5
pulsating
1,6
6,3
6,3
d2
d1
d2
1)
h+0,1
b+0,2
r1
r2
1,50
1,10
1,9
0,2 - 0,4
0,2 - 0,4
1,80
1,30
2,4
0,2 - 0,4
0,2 - 0,4
2,00
1,50
2,6
0,2 - 0,4
0,2 - 0,4
2,50
2,00
3,2
0,2 - 0,4
0,2 - 0,4
2,65
2,10
3,6
0,2 - 0,4
0,2 - 0,4
3,00
2,30
3,9
0,4 - 0,8
0,2 - 0,4
3,55
2,80
4,8
0,4 - 0,8
0,2 - 0,4
4,00
3,25
5,2
0,4 - 0,8
0,2 - 0,4
5,00
4,00
6,5
0,4 - 0,8
0,2 - 0,4
5,30
4,35
7,2
0,4 - 0,8
0,2 - 0,4
6,00
5,00
7,8
0,4 - 0,8
0,2 - 0,4
7,00
5,75
9,6
0,8 - 1,2
0,2 - 0,4
8,00
6,80
10,4
0,8 - 1,2
0,2 - 0,4
9,00
7,70
11,7
0,8 - 1,2
0,2 - 0,4
10,00
8,70
13,0
0,8 - 1,2
0,2 - 0,4
12,00
10,60
15,6
0,8 - 1,2
0,2 - 0,4
The ISO/DIN recommendations are preferred and are shown here in heavy print.
39
O-Ring Guide
Parker Hannifin
Gland designs
Surface roughness in μm, load area1)
Gland designs
Static seal – radial
d2
d1
Gland dimensions – radial deformation
d2
t1)
b+0,2
z
r1
r2
1,50
1,10
1,9
1,5
0,2 - 0,4
0,1 - 0,3
1,80
1,40
2,4
1,5
0,2 - 0,4
0,1 - 0,3
2,00
1,50
2,6
1,5
0,2 - 0,4
0,1 - 0,3
2,50
2,00
3,2
1,5
0,2 - 0,4
0,1 - 0,3
2,65
2,20
3,6
1,5
0,2 - 0,4
0,1 - 0,3
3,00
2,30
3,9
2,0
0,4 - 0,8
0,1 - 0,3
3,55
2,90
4,8
2,0
0,4 - 0,8
0,1 - 0,3
4,00
3,25
5,2
2,0
0,4 - 0,8
0,1 - 0,3
5,00
4,10
6,5
3,0
0,4 - 0,8
0,1 - 0,3
5,30
4,50
7,2
3,0
0,4 - 0,8
0,1 - 0,3
6,00
5,00
7,8
3,0
0,4 - 0,8
0,1 - 0,3
7,00
5,90
9,6
3,6
0,8 - 1,2
0,1 - 0,3
8,00
6,80
10,4
4,0
0,8 - 1,2
0,1 - 0,3
9,00
7,70
11,7
4,5
0,8 - 1,2
0,1 - 0,3
10,00
8,70
13,0
4,5
0,8 - 1,2
0,1 - 0,3
12,00
10,60
15,6
4,5
0,8 - 1,2
0,1 - 0,3
Surface finish roughness – static seal
Surface
Pressure
load area tp > 50 %
Ra
Rmax.
A Contact area
non-pulsating
1,6
A Contact area
pulsating
0,8
3,2
non-pulsating
3,2
12,5
pulsating
1,6
6,3
C Surface finish of leading edge chamfer
3,2
12,5
6,3
The tolerances are taken from d3h9 + d4H8 or d5f7+d6H9.
1) The ISO/DIN recommendations are preferred and are shown in heavy print.
40
O-Ring Guide
Parker Hannifin
Gland designs
r2
b + 0.2
r1
B
rounded
and flash free
B
O d 9 f7
A
O d3 h9
O d4 H 8
t
C
15° to 20°
0° to 5°
Z
Piston seal
b+0.2
r1
B
r2
15° to 20°
A
t
C
O d10 H 8
O d5 f7
Gland designs
Od6 H 9
B
rounded
and flash free
Z
0° to 5°
Rod seal
41
O-Ring Guide
Parker Hannifin
Gland designs
Static seal – dovetail groove
The dovetail groove form is used when it is necessary to hold an O-Ring in
position; e.g. during surface work, on opening and closing of tooling, where
otherwise the O-Ring would fall out of the gland.
The machining of the gland is difficult and expensive.
b
B
r2
B
h
r1
Od
d = d1 + d 2
24°
Dovetail gland
d = gland mean diameter
•The gland width is measured before edges are deburred
•The radius r2 is so selected that the O-Ring is not damaged on assembly
and so that the O-Ring can not be trapped in the gap under high pressure.
Static seal – half dovetail gland
42
O-Ring Guide
Parker Hannifin
Gland designs
Dovetail gland dimensions
d2
h
b
r1
r2
1,80
1,25+0.05
1,40+0.1
0,1 - 0,3
0,4 - 1,6
1,80
2,05+0.05
2,10+0.1
0,1 - 0,3
0,4 - 1,6
3,55
1,80+0.05
2,85+0.1
0,1 - 0,3
0,4 - 1,6
5,30
4,55+0.08
4,35+0.1
0,1 - 0,3
0,4 - 1,6
7,00
5,85+0.08
5,85+0.1
0,1 - 0,3
0,4 - 1,6
Surface roughness
Surface
Pressure
load area tp > 50 %
Ra
Rmax.
A Contact area
non-pulsating
1,6
A Contact area
pulsating
0,8
3,2
non-pulsating
3,2
12,5
pulsating
1,6
6,3
6,3
Half dovetail gland dimensions
h
b
Nominal squeeze
(%)
27
r1
r2
1,78
1,30
1,60
2,62
2,05+0.05
0,1 - 0,3
0,4 - 1,6
2,40+0.2
22
0,1 - 0,3
3,53
0,4 - 1,6
2,85+0.05
3,15+0.2
19
0,1 - 0,3
0,4 - 1,6
5,33
4,35+0.08
4,80+0.2
18
0,1 - 0,3
0,4 - 1,6
6,99
5,90+0.08
6,50+0.2
16
0,1 - 0,3
0,4 - 1,6
+0.05
+0.2
Gland designs
d2
43
O-Ring Guide
Parker Hannifin
Gland designs
Dynamic seal – hydraulic
b+0.2
r1
B
r2
15° to 20°
A
t
C
O d10 H 7
O d5 f7
Od6 H 9
B
rounded
and flash free
Z
0° to 5°
Rod seal – hydraulic
O d9 f7
r2
b+0.2
r1
B
rounded
and flash free
B
A
O d3 h9
O d4 H 8
t
C
15° to 20°
0° to 5°
Z
Piston seal – hydraulic
44
O-Ring Guide
Parker Hannifin
Gland designs
Surface-finish roughness – hydraulic
Surface
load area tp > 50 %
Ra
Rmax.
A Contact area
0,4
1,6
1,6
6,3
C Surface finish of leading edge chamfer
3,2
12,5
Gland dimensions – hydraulic
t1)
b+0,2
z
r1
r2
1,50
1,30
1,9
1,5
0,2 - 0,4
0,1 - 0,3
1,80
1,45
2,4
1,5
0,2 - 0,4
0,1 - 0,3
2,00
1,70
2,6
1,5
0,2 - 0,4
0,1 - 0,3
2,50
2,10
3,3
1,5
0,2 - 0,4
0,1 - 0,3
2,65
2,20
3,6
1,5
0,2 - 0,4
0,1 - 0,3
3,00
2,60
3,9
1,8
0,4 - 0,8
0,1 - 0,3
3,55
3,05
4,8
1,8
0,4 - 0,8
0,1 - 0,3
4,00
3,50
5,3
1,8
0,4 - 0,8
0,1 - 0,3
5,00
4,45
6,7
2,7
0,4 - 0,8
0,1 - 0,3
5,30
4,65
7,1
2,7
0,4 - 0,8
0,1 - 0,3
6,00
5,40
8,0
3,6
0,4 - 0,8
0,1 - 0,3
7,00
6,20
9,5
3,6
0,4 - 0,8
0,1 - 0,3
Gland designs
d2
The tolerances is a combination of d3h9 + d4H8 or d5f7+d6H9.
1) The ISO/DIN recommendations are preferred and are shown here in heavy print.
Additional information to the surface-finish-roughness and the gland dimensions of the pneumatic
application is available in the Parker O-Ring Handbook.
45
O-Ring Guide
Parker Hannifin
46
O-Ring Guide
Parker Hannifin
Sizing charts
The following charts provide dimensions for standard shrinkage materials
only. These correspond to AS568B dimensions. O-Rings manufactured from
compounds with different shrinkage rates will provide slightly different dimensions and tolerances when standard tooling is used. Custom tooling may be
necessary for some compounds in order to meet AS568B dimensions and
tolerances.
For further information contact a Parker O-Ring applications engineer.
PTFE O-Rings
These O-Rings can be manufactured with inside diameters from 3 to 735 mm
and cross-sections from 1.0 to 20 mm.
PTFE and FEP encapsulated O-Rings
These O-Rings are manufactured for standard inch sizes: metric and special
sizes are available upon request.
Ultrathan® O-Rings
Please Note: Depending on the production method and inspection criteria,
Ultrathan®-O-Rings do not meet all requirements of the DIN ISO 3601. This
must be considered during assembly.
Metal O-Rings
They belong to the group of resilient metal seals and are used in harsh conditions. With its “Enerrings” range, Parker provides different geometries (O-, C-,
E-profiles and others) used in applications with very high pressures, exceptional temperatures and when extremely low leakage rates or maximum media
resistance are required.
47
O-Ring Guide
Parker Hannifin
Sizing charts
Characteristics of the 2-xxx series
The 2-xxx series from Parker Hannifin brings two particular advantages for
the user.
•ex-stock in following compounds:
N0674-70 (NBR 70 Shore A)
N0552-90 (NBR 90 Shore A)
E0540-80 (EPDM 80 Shore A)
V0747-75 (FKM 75 Shore A)
•For each 2-xxx series O-Ring we can offer a Parker Parbak® back-up ring
to fit. This is particularly important where large clearance gaps and/or high
pressures exist (see chapter Parbak® back-up ring).
Sizing charts – 2-xxx-sizes
2-0xx-sizes, cross section d2 = 1,78 mm
Parker
Ød
No.
mm
2-0011)
0,74
2-0021)
1,07
2-0031)
1,42
2-004
1,78
2-005
2,57
2-006
2,90
2-007
3,68
2-008
4,47
2-009
5,28
2-010
6,07
2-011
7,65
2-012
9,25
2-013
10,82
2-014
12,42
2-015
14,00
2-016
15,60
2-017
17,17
2-018
18,77
2-019
20,35
2-020
21,95
2-021
23,52
2-022
25,12
2-023
26,70
2-024
28,30
2-025
29,87
2-026
31,47
2-027
33,05
2-028
34,65
2-029
37,82
2-030
41,00
2-031
44,17
2-032
47,35
2-033
50,52
2-034
53,70
2-035
56,87
2-036
60,05
2-037
63,22
2-038
66,40
2-039
69,57
2-040
72,75
2-041
75,92
2-042
82,27
2-043
88,62
2-044
94,97
2-045 101,32
2-046 107,67
1)
Cross
sect. d2
1,02
1,27
1,52
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
Parker
No.
2-047
2-048
2-049
2-050
Ød
mm
114,02
120,37
126,72
133,07
Cross
sect. d2
1,78
1,78
1,78
1,78
Please note for these sizes the different cross section.
48
O-Ring Guide
Parker Hannifin
Ød
mm
1,24
2,06
2,84
3,63
4,42
5,23
6,02
7,59
9,19
10,77
12,37
13,94
15,54
17,12
18,72
20,29
21,89
23,47
25,07
26,64
28,24
29,82
31,42
32,99
34,59
36,17
37,77
39,34
40,94
42,52
44,12
45,69
47,29
48,90
50,47
52,07
53,64
55,25
56,82
58,42
59,99
61,60
63,17
64,77
66,34
67,95
Cross
sect. d2
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
Parker
No.
2-148
2-149
2-150
2-151
2-152
2-153
2-154
2-155
2-156
2-157
2-158
2-159
2-160
2-161
2-162
2-163
2-164
2-165
2-166
2-167
2-168
2-169
2-170
2-171
2-172
2-173
2-174
2-175
2-176
2-177
2-178
Ød
mm
69,52
71,12
72,69
75,87
82,22
88,57
94,92
101,27
107,62
113,97
120,32
126,67
133,02
139,37
145,72
152,07
158,42
164,77
171,12
177,47
183,82
190,17
196,52
202,87
209,22
215,57
221,92
228,27
234,62
240,97
247,32
Cross
sect. d2
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
2,62
49
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
2-102
2-103
2-104
2-105
2-106
2-107
2-108
2-109
2-110
2-111
2-112
2-113
2-114
2-115
2-116
2-117
2-118
2-119
2-120
2-121
2-122
2-123
2-124
2-125
2-126
2-127
2-128
2-129
2-130
2-131
2-132
2-133
2-134
2-135
2-136
2-137
2-138
2-139
2-140
2-141
2-142
2-143
2-144
2-145
2-146
2-147
Parker
No.
2-201
2-202
2-203
2-204
2-205
2-206
2-207
2-208
2-209
2-210
2-211
2-212
2-213
2-214
2-215
2-216
2-217
2-218
2-219
2-220
2-221
2-222
2-223
2-224
2-225
2-226
2-227
2-228
2-229
2-230
2-231
2-232
2-233
2-234
2-235
2-236
2-237
2-238
2-239
2-240
2-241
2-242
2-243
2-244
2-245
2-246
Ød
mm
4,34
5,94
7,52
9,12
10,69
12,29
13,87
15,47
17,04
18,64
20,22
21,82
23,39
24,99
26,57
28,17
29,74
31,34
32,92
34,52
36,09
37,69
40,87
44,04
47,22
50,39
53,57
56,74
59,92
63,09
66,27
69,44
72,62
75,79
78,97
82,14
85,32
88,49
91,67
94,84
98,02
101,19
104,37
107,54
110,72
113,89
Cross
sect. d2
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
Parker
No.
2-247
2-248
2-249
2-250
2-251
2-252
2-253
2-254
2-255
2-256
2-257
2-258
2-259
2-260
2-261
2-262
2-263
2-264
2-265
2-266
2-267
2-268
2-269
2-270
2-271
2-272
2-273
2-274
2-275
2-276
2-277
2-278
2-279
2-280
2-281
2-282
2-283
2-284
Ød
mm
117,07
120,24
123,42
126,59
129,77
132,94
136,12
139,29
142,47
145,64
148,52
151,99
158,34
164,69
171,04
177,39
183,74
190,09
196,44
202,79
209,14
215,49
221,84
228,19
234,54
240,89
247,24
253,59
266,29
278,99
291,69
304,39
329,79
355,19
380,59
405,26
430,66
456,06
Cross
sect. d2
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
50
O-Ring Guide
Parker Hannifin
Ød
mm
10,46
12,07
13,64
15,24
16,81
18,42
19,99
21,59
23,16
24,77
26,34
27,94
29,51
31,12
32,69
34,29
37,47
40,64
43,82
46,99
50,17
53,34
56,52
59,69
62,87
66,04
69,22
72,39
75,57
78,74
81,92
85,09
88,27
91,44
94,62
97,79
100,97
104,14
107,32
110,49
113,67
116,84
120,02
123,19
126,37
129,54
Cross
sect. d2
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
3,53
3,53
3,53
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
Parker
No.
2-355
2-356
2-357
2-358
2-359
2-360
2-361
2-362
2-363
2-364
2-365
2-366
2-367
2-368
2-369
2-370
2-371
2-372
2-373
2-374
2-375
2-376
2-377
2-378
2-379
2-380
2-381
2-382
2-383
2-384
2-385
2-386
2-387
2-388
2-389
2-390
2-391
2-392
2-393
2-394
2-395
Ød
mm
132,72
135,89
139,07
142,24
145,42
148,59
151,77
158,12
164,47
170,82
177,17
183,52
189,87
196,22
202,57
208,92
215,27
221,62
227,97
234,34
240,67
247,02
253,37
266,07
278,77
291,47
304,17
329,57
354,97
380,37
405,26
430,66
456,06
481,41
506,81
532,21
557,61
582,68
608,08
633,48
658,88
Cross
sect. d2
5,33
5,33
5,33
3,53
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
3,53
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
5,33
51
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
2-309
2-310
2-311
2-312
2-313
2-314
2-315
2-316
2-317
2-318
2-319
2-320
2-321
2-322
2-323
2-324
2-325
2-326
2-327
2-328
2-329
2-330
2-331
2-332
2-333
2-334
2-335
2-336
2-337
2-338
2-339
2-340
2-341
2-342
2-343
2-344
2-345
2-346
2-347
2-348
2-349
2-350
2-351
2-352
2-353
2-354
Parker
No.
2-425
2-426
2-427
2-428
2-429
2-430
2-431
2-432
2-433
2-434
2-435
2-436
2-437
2-438
2-439
2-440
2-441
2-442
2-443
2-444
2-445
2-446
2-447
2-448
2-449
2-450
2-451
2-452
2-453
2-454
2-455
2-456
2-457
2-458
2-459
2-460
2-461
2-462
2-463
2-464
2-465
2-466
2-467
2-468
2-469
2-470
Ød
mm
113,67
116,84
120,02
123,19
126,37
129,54
132,72
135,89
139,07
142,24
145,42
148,59
151,77
158,12
164,47
170,82
177,17
183,52
189,87
196,22
202,57
215,27
227,97
240,67
253,37
266,07
278,77
291,47
304,17
316,87
329,57
342,27
354,97
367,67
380,37
393,07
405,26
417,96
430,66
443,36
456,06
468,76
481,46
494,16
506,86
532,26
Cross
sect. d2
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
6,99
Parker
No.
2-471
2-472
2-473
2-474
2-475
Ød
mm
557,66
582,68
608,08
633,48
658,88
Cross
sect. d2
6,99
6,99
6,99
6,99
6,99
52
O-Ring Guide
Parker Hannifin
Ød
mm
6,07
7,65
8,92
10,52
11,89
13,46
16,36
19,18
21,92
23,47
25,04
26,59
29,74
34,42
37,47
53,09
59,36
Cross
sect. d2
1,63
1,63
1,83
1,83
1,98
2,08
2,21
2,46
2,95
2,95
2,95
2,95
2,95
2,95
3,00
3,00
3,00
53
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
3-902
3-903
3-904
3-905
3-906
3-907
3-908
3-910
3-911
3-912
3-913
3-914
3-916
3-918
3-920
3-928
3-932
Parker
No.
5-035
5-037
5-051
5-052
5-092
5-108
5-157
5-190
5-212
5-239
5-243
5-256
5-321
5-330
5-332
5-361
5-381
5-434
5-445
5-488
5-525
5-578
5-579
5-580
5-581
5-582
5-583
5-584
5-585
5-586
5-587
5-588
5-589
5-590
5-591
5-592
5-593
5-594
5-595
5-596
5-597
5-598
5-599
5-600
5-601
5-602
5-603
5-604
Ød
mm
45,36
51,71
1,78
6,86
701,68
4,47
33,99
3,35
9,75
14,48
15,34
17,96
39,60
42,52
42,85
67,84
88,27
180,54
210,24
316,56
425,83
2,60
3,40
4,20
4,90
5,70
6,40
7,20
8,00
8,90
8,90
10,50
12,10
13,59
15,10
16,90
18,40
18,30
19,80
21,30
23,00
24,60
26,20
27,80
29,30
30,80
32,50
34,10
Cross
sect. d2
3,53
3,53
1,02
1,78
6,99
1,27
2,34
1,78
1,78
2,69
2,62
2,62
3,53
5,33
3,53
3,53
6,99
6,99
6,99
2,62
3,18
1,90
1,90
1,90
1,90
1,90
1,90
1,90
1,88
1,90
2,70
2,70
2,70
2,69
2,70
2,70
2,70
3,60
3,60
3,60
3,60
3,60
3,60
3,60
3,60
3,60
3,60
3,60
Parker
No.
5-605
5-606
5-612
5-613
5-614
5-615
5-616
5-617
5-618
5-643
5-664
5-670
5-673
5-676
5-683
5-686
5-690
5-700
5-701
5-702
5-703
5-704
5-705
5-716
5-805
5-816
5-843
5-850
5-976
Ød
mm
35,60
37,30
8,74
11,10
9,93
11,91
13,11
15,88
25,81
16,51
8,13
36,50
7,75
15,49
3,10
6,30
17,30
9,00
49,20
58,74
65,09
71,44
74,61
9,19
64,39
80,31
118,72
125,09
264,79
Cross
sect. d2
3,60
3,60
1,78
1,78
2,62
2,62
2,62
2,62
3,53
1,14
1,78
1,78
1,88
1,47
1,60
2,39
2,40
3,00
3,53
3,53
3,53
3,53
3,53
3,00
1,78
1,78
2,62
6,60
6,60
54
O-Ring Guide
Parker Hannifin
Parker
No.
6-001
6-002
6-003
6-005
6-006
6-007
6-008
6-009
6-010
6-011
6-012
6-013
6-015
6-016
6-017
6-018
6-019
6-020
6-021
6-022
6-023
6-025
6-026
6-027
6-028
6-030
6-031
6-032
6-033
6-034
6-035
6-036
6-037
6-038
6-039
6-040
6-041
6-042
6-043
6-044
6-045
6-046
6-047
6-048
6-049
6-050
6-051
6-052
Ød
mm
6,00
8,00
10,00
15,00
16,70
18,00
21,00
47,50
9,00
7,00
9,30
89,50
42,00
13,00
20,00
3,00
4,00
2,70
3,50
24,00
27,30
101,00
137,00
40,00
7,00
73,00
70,00
118,00
13,00
29,50
4,00
22,00
30,00
6,00
19,00
15,00
17,90
16,00
15,00
17,00
72,00
38,00
35,00
30,00
27,00
24,20
50,00
7,10
Cross
sect. d2
2,00
2,00
2,00
2,00
1,45
3,15
2,00
4,00
1,50
1,50
2,40
3,00
1,50
2,50
2,50
1,00
1,10
1,50
1,20
2,00
2,40
3,00
3,00
2,00
2,50
3,00
3,00
2,00
1,50
1,50
1,50
2,50
3,15
1,50
2,50
1,60
1,25
3,00
3,00
2,00
3,00
2,00
2,00
2,00
2,00
3,00
2,00
1,60
Parker
No.
6-053
6-054
6-055
6-056
6-058
6-059
6-060
6-061
6-063
6-065
6-066
6-067
6-069
6-070
6-072
6-074
6-075
6-076
6-078
6-079
6-080
6-082
6-083
6-084
6-085
6-086
6-087
6-088
6-089
6-090
6-091
6-092
6-095
6-096
6-097
6-099
6-100
6-101
6-102
6-103
6-104
6-105
6-106
6-107
6-108
6-109
6-110
6-112
Ød
mm
12,00
45,00
50,00
30,00
12,30
135,00
135,00
146,00
5,35
12,00
23,00
14,00
5,00
8,30
15,00
8,00
13,00
18,00
20,00
6,00
7,00
45,00
10,00
11,00
15,00
11,00
18,00
22,00
21,00
14,00
7,50
24,80
132,00
13,50
31,00
20,00
91,00
28,00
40,60
161,00
4,00
10,00
15,00
60,00
79,60
58,00
5,00
53,00
Cross
sect. d2
1,50
2,00
2,50
3,00
2,40
3,23
3,43
3,23
1,50
2,00
2,50
2,50
1,50
2,40
3,20
1,50
2,00
2,00
1,50
5,00
3,00
1,50
1,50
1,50
1,80
2,00
1,50
1,50
3,50
2,00
1,50
1,50
3,00
2,75
4,50
1,30
3,00
1,50
4,00
3,00
2,00
2,50
2,50
4,10
3,20
4,00
2,00
6,50
55
Parker
No.
6-113
6-114
6-115
6-116
6-118
6-119
6-120
6-121
6-122
6-123
6-124
6-125
6-126
6-128
6-129
6-130
6-132
6-133
6-134
6-135
6-136
6-137
6-138
6-139
6-140
6-141
6-142
6-143
6-146
6-147
6-148
6-149
6-151
6-152
6-153
6-154
6-155
6-156
6-157
6-158
6-159
6-160
6-161
6-162
6-163
6-164
6-165
6-166
Ød
mm
53,00
60,00
125,00
10,00
15,00
19,50
9,00
81,00
186,44
118,50
12,00
18,00
25,30
15,00
13,23
20,00
18,00
4,70
7,50
14,30
33,00
100,00
2,50
22,00
28,00
55,00
30,70
14,00
16,00
27,00
177,00
205,00
63,00
210,00
320,50
36,30
48,00
30,00
98,00
437,00
46,02
13,75
9,00
7,30
13,10
420,00
420,00
3,90
Cross
sect. d2
5,00
5,00
8,00
1,00
1,50
1,50
1,80
3,00
6,99
3,00
3,00
4,00
1,60
5,00
1,78
3,00
2,50
1,90
2,50
2,40
2,00
5,00
1,30
2,00
2,00
2,00
2,00
1,50
2,00
3,00
2,00
2,00
4,00
5,00
5,33
1,78
3,00
2,50
3,00
3,00
3,53
2,80
2,50
2,70
1,60
5,00
3,50
1,80
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-167
6-168
6-170
6-173
6-174
6-175
6-176
6-177
6-178
6-179
6-180
6-183
6-184
6-189
6-190
6-192
6-193
6-194
6-195
6-198
6-202
6-203
6-204
6-205
6-206
6-207
6-208
6-209
6-212
6-214
6-215
6-216
6-218
6-221
6-222
6-223
6-224
6-226
6-227
6-228
6-229
6-230
6-232
6-233
6-234
6-235
6-236
6-237
Ød
mm
2,50
2,50
159,00
422,00
100,00
273,05
577,85
18,30
74,00
533,40
28,00
219,00
83,80
25,50
840,00
8,10
44,35
49,50
79,50
12,50
514,00
367,00
381,00
39,20
15,30
13,00
26,70
398,00
20,34
4,50
425,00
90,00
10,60
38,00
150,00
15,80
138,00
200,00
42,00
740,00
837,00
882,00
984,00
602,00
283,00
637,00
689,00
786,00
Cross
sect. d2
1,20
1,70
4,00
2,00
2,50
3,53
6,99
2,40
2,00
3,18
2,20
5,30
2,62
2,00
12,00
1,60
3,00
3,00
3,00
2,00
8,00
3,50
5,00
3,00
2,40
3,50
2,50
8,00
4,25
1,50
6,00
3,00
2,00
5,00
5,40
2,40
6,00
6,00
3,00
10,00
10,00
10,00
10,00
8,00
12,00
10,00
10,00
10,00
Parker
No.
6-238
6-239
6-240
6-241
6-242
6-243
6-245
6-247
6-248
6-249
6-250
6-251
6-252
6-253
6-254
6-255
6-256
6-257
6-258
6-258
6-260
6-261
6-263
6-265
6-266
6-267
6-268
6-269
6-270
6-271
6-272
6-273
6-274
6-275
6-276
6-277
6-278
6-279
6-280
6-281
6-282
6-283
6-285
6-287
6-288
6-289
6-290
6-291
Ød
mm
285,00
1029,00
1075,00
291,00
63,00
67,00
1154,00
624,00
783,00
910,00
936,00
3,70
231,50
106,80
218,00
126,00
480,06
93,39
17,96
17,96
506,00
504,00
22,70
619,50
693,50
734,00
827,00
950,50
1046,00
1103,00
69,24
196,00
115,00
20,30
88,00
8,79
622,00
810,00
1016,00
241,00
171,00
330,00
21,70
22,89
24,32
25,79
30,30
37,00
Cross
sect. d2
12,00
10,00
10,00
6,00
2,50
1,50
10,00
6,99
6,99
6,99
6,99
1,90
6,00
2,66
12,00
5,00
10,00
1,47
2,62
2,62
2,62
6,99
1,50
8,00
10,10
6,99
7,00
10,06
7,00
10,00
3,40
12,00
3,00
2,40
3,00
1,14
8,00
7,10
7,00
7,00
11,00
6,00
0,73
1,00
1,00
1,00
2,40
2,50
56
Parker
Ød
No.
mm
6-292
40,00
6-293
47,20
6-294
74,20
6-295
19,00
6-296
27,71
6-297
16,58
6-298
23,60
6-299 191,00
6-300
19,80
6-301 677,00
6-302 955,00
6-303 763,01
6-304 887,00
6-305 736,00
6-306
2,20
6-307
3,33
6-308
18,50
6-309
87,30
6-311
7,00
6-313
16,50
6-314
31,02
6-316
67,00
6-317
7,80
6-318 151,70
6-320 608,00
6-321 700,00
6-322 810,00
6-323
45,00
6-324
31,00
6-328 500,00
6-329
36,00
6-330 850,00
6-331 431,80
6-332 1011,00
6-333 1042,00
6-334 960,00
6-335 914,00
6-336 262,00
6-337
41,40
6-338
5,60
6-339
94,50
6-340
14,60
6-341 137,30
6-342 204,00
6-343
21,50
6-344
6,20
6-345
8,20
6-346
9,40
Cross
sect. d2
3,00
5,70
5,70
0,80
1,02
1,50
1,02
1,78
2,40
7,00
12,60
6,99
6,99
3,53
1,60
1,02
1,50
2,00
2,00
2,70
3,00
2,50
3,60
5,60
10,00
10,00
10,00
2,50
2,50
3,53
2,50
10,00
7,10
5,33
5,33
5,33
5,33
5,33
2,62
2,40
3,00
2,40
8,00
8,00
1,78
1,50
1,50
2,10
O-Ring Guide
Parker Hannifin
Parker
Ød
No.
mm
6-347
11,40
6-348
13,40
6-349
15,40
6-350
19,40
6-351
23,70
6-352
29,70
6-353
38,70
6-354
46,70
6-356
22,10
6-360
19,00
6-361
3,30
6-363 865,00
6-364
1,98
6-366
11,89
6-367
17,81
6-369
1,50
6-370
48,00
6-372 720,00
6-373
9,53
6-374
6,30
6-375
10,25
6-376
25,00
6-377
35,00
6-378 140,00
6-379 138,00
6-380 594,51
6-381 647,70
6-382
20,20
6-385 1071,00
6-387
25,80
6-388
17,40
6-389 723,90
6-390
8,00
6-392
99,00
6-393 1060,00
6-394 514,00
6-395
9,35
6-396
18,20
6-397
14,50
6-399
94,50
6-400
27,00
6-401
4,50
6-402
3,50
6-404
19,00
6-405
93,50
6-407 242,00
6-408
0,80
6-409 940,00
Cross
sect. d2
2,10
2,10
2,10
2,10
2,80
2,80
2,80
2,80
1,60
2,00
2,40
12,00
0,84
1,78
1,02
1,00
2,00
6,99
1,60
1,60
1,40
5,00
5,30
4,00
2,10
7,14
6,99
3,00
14,40
3,30
2,50
6,99
3,00
6,99
10,00
8,00
1,60
3,00
1,60
3,00
1,50
1,00
1,25
5,00
9,50
6,00
1,60
10,00
Parker
No.
6-411
6-412
6-413
6-414
6-415
6-416
6-417
6-418
6-420
6-421
6-422
6-423
6-425
6-426
6-427
6-428
6-430
6-431
6-432
6-433
6-434
6-435
6-436
6-437
6-438
6-439
6-440
6-441
6-442
6-443
6-444
6-445
6-446
6-447
6-448
6-449
6-451
6-452
6-453
6-454
6-455
6-456
6-457
6-458
6-459
6-460
6-461
6-462
Ød
mm
60,00
238,00
100,00
41,75
800,00
65,00
760,00
1,85
4,00
112,00
607,00
46,87
18,00
25,00
57,00
4,00
21,20
44,00
7,50
38,00
51,50
48,40
240,00
8,00
12,00
16,00
6,80
3,00
25,00
24,00
159,20
82,00
94,00
58,00
119,20
41,00
129,20
85,20
24,00
30,00
62,00
84,00
125,00
400,00
37,36
996,00
213,68
558,00
Cross
sect. d2
2,50
5,00
4,00
2,60
5,33
5,30
5,00
1,50
2,20
3,00
4,00
2,62
3,00
4,00
3,00
2,50
2,40
2,00
2,00
2,50
1,50
4,85
12,00
1,00
1,00
1,00
2,00
1,50
2,00
6,00
5,70
4,00
2,00
2,00
5,70
3,00
5,70
9,25
4,00
4,00
2,50
3,00
5,00
12,00
2,60
7,00
7,14
10,00
57
Parker
No.
6-464
6-466
6-467
6-468
6-469
6-470
6-471
6-472
6-473
6-474
6-475
6-476
6-480
6-483
6-485
6-486
6-487
6-489
6-491
6-492
6-493
6-494
6-495
6-496
6-497
6-497
6-498
6-499
6-500
6-501
6-502
6-503
6-504
6-505
6-508
6-509
6-510
6-511
6-512
6-513
6-514
6-515
6-516
6-517
6-518
6-520
6-521
6-523
Ød
mm
76,00
188,00
528,00
3,50
330,00
9,00
11,30
33,30
13,60
63,00
10,30
17,00
6,60
74,00
225,00
7,80
2,90
21,00
3,50
174,00
22,00
162,50
190,00
151,00
27,50
27,50
90,00
18,60
66,00
65,00
220,00
19,30
120,00
270,00
849,00
819,00
315,00
140,00
144,00
82,00
250,00
134,00
230,00
335,00
355,00
8,00
716,00
65,00
Cross
sect. d2
4,50
4,00
8,00
1,50
8,00
2,00
2,40
2,40
2,50
4,50
2,40
1,50
1,50
3,00
5,00
4,60
1,02
6,00
1,10
3,00
1,39
3,53
3,00
3,00
1,50
1,50
2,00
2,00
2,00
2,00
3,00
2,40
3,00
3,00
7,00
7,00
6,00
3,00
3,70
2,00
3,00
3,00
3,00
3,00
3,00
2,20
8,00
3,00
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
Ød
No.
mm
6-524
17,00
6-525
41,28
6-527 974,00
6-528
16,00
6-529 524,00
6-530 455,00
6-531 710,00
6-532
10,00
6-534 1004,00
6-535 680,00
6-536 635,00
6-538
2,40
6-539
70,00
6-540
33,00
6-541
41,00
6-542
44,20
6-543
6,00
6-544
24,00
6-545
35,00
6-546 205,00
6-547 197,00
6-548
5,70
6-549
3,00
6-550
12,50
6-551
10,80
6-552
70,00
6-553 304,80
6-554
17,40
6-555
37,00
6-556
52,00
6-556
52,00
6-557
18,60
6-558
87,20
6-559 137,00
6-560
59,70
6-561
88,30
6-562
16,00
6-564
8,00
6-566
40,00
6-568
56,00
6-569
80,00
6-570 215,00
6-571
10,15
6-572
6,50
6-573
19,00
6-574
86,84
6-575
39,00
6-576 160,00
Cross
sect. d2
1,10
3,53
7,00
1,50
10,00
8,00
5,33
2,20
8,00
5,00
5,00
1,90
4,50
2,50
2,50
2,50
1,00
1,50
4,50
3,00
3,00
3,20
1,20
1,10
1,50
2,00
1,78
2,10
5,00
3,00
3,00
3,50
2,50
14,00
7,00
7,00
2,50
2,50
2,50
2,00
2,00
6,00
1,40
2,00
1,50
5,33
2,00
3,00
Parker
No.
6-577
6-578
6-579
6-580
6-581
6-582
6-583
6-584
6-585
6-586
6-587
6-588
6-589
6-592
6-593
6-594
6-595
6-596
6-597
6-598
6-600
6-601
6-602
6-603
6-604
6-605
6-606
6-607
6-608
6-609
6-610
6-611
6-612
6-613
6-614
6-615
6-618
6-619
6-621
6-622
6-623
6-626
6-627
6-628
6-630
6-631
6-632
6-633
Ød
mm
130,00
445,00
87,00
118,31
6,50
95,50
5,00
13,00
34,40
39,40
74,40
84,40
105,00
8,00
19,20
42,00
24,00
65,00
875,00
375,00
209,20
100,00
140,00
50,00
240,00
10,00
35,00
315,00
94,20
36,00
9,00
25,00
125,00
4,00
190,00
3,00
234,32
20,00
535,46
34,00
149,20
580,00
10,10
19,30
51,00
179,00
16,00
61,00
Cross
sect. d2
6,00
8,00
3,00
3,53
1,50
3,53
1,20
1,00
3,10
3,10
3,10
3,10
2,00
1,25
3,00
2,50
2,50
4,50
8,00
5,34
5,70
2,00
10,00
4,00
3,00
3,00
2,50
4,00
5,70
2,20
1,20
1,50
3,00
1,00
5,00
2,00
1,78
2,00
7,24
2,80
5,70
8,00
1,00
3,65
3,00
3,00
1,25
4,50
58
Parker
No.
6-634
6-635
6-636
6-638
6-640
6-642
6-643
6-644
6-645
6-646
6-647
6-648
6-649
6-650
6-651
6-652
6-653
6-654
6-655
6-656
6-657
6-658
6-659
6-660
6-661
6-662
6-663
6-664
6-665
6-666
6-667
6-668
6-669
6-670
6-671
6-672
6-673
6-674
6-676
6-677
6-678
6-682
6-683
6-684
6-685
6-686
6-687
6-688
Ød
mm
71,00
236,00
64,00
281,00
97,00
40,00
57,00
638,89
665,00
32,00
617,00
820,00
798,00
853,00
9,00
6,00
664,00
28,00
174,20
26,00
7,00
8,00
67,00
27,00
7,50
12,00
30,00
54,00
60,00
24,00
770,00
708,00
450,00
550,00
245,00
364,00
48,20
120,00
84,00
11,50
36,00
375,00
15,00
3,20
3,40
3,20
21,50
133,35
Cross
sect. d2
4,50
7,00
3,00
5,00
1,50
1,50
1,50
5,44
5,00
2,70
7,00
7,00
7,00
7,00
4,00
5,20
5,00
2,50
5,70
2,00
1,00
1,40
3,00
5,00
1,25
3,80
4,65
4,65
3,00
1,00
10,00
10,00
10,00
10,00
10,00
10,00
1,78
1,50
2,50
1,00
2,00
10,00
1,00
1,02
2,00
1,60
1,50
5,33
O-Ring Guide
Parker Hannifin
Parker
No.
6-689
6-690
6-692
6-693
6-694
6-698
6-699
6-700
6-701
6-702
6-703
6-704
6-705
6-706
6-707
6-708
6-709
6-710
6-711
6-713
6-714
6-715
6-716
6-717
6-718
6-719
6-720
6-722
6-723
6-724
6-725
6-726
6-728
6-729
6-730
6-731
6-733
6-734
6-736
6-737
6-738
6-740
6-741
6-742
6-743
6-745
6-745
6-746
Ød
mm
150,00
546,00
8,50
130,00
36,00
140,00
62,00
96,00
695,00
707,00
55,30
180,00
14,00
189,20
865,00
929,00
565,00
7,50
388,00
6,00
1,80
8,80
320,00
11,00
258,40
57,00
93,00
128,00
380,00
102,00
16,56
45,00
26,00
78,00
13,00
18,00
85,00
430,00
3,17
13,89
5,33
109,00
428,00
614,00
93,00
25,30
25,30
169,20
Cross
sect. d2
3,00
7,00
1,50
2,50
2,10
2,00
3,00
2,00
6,99
6,99
2,00
3,00
3,00
5,70
8,40
6,00
7,00
1,00
5,00
1,25
1,00
1,00
6,00
2,50
1,60
2,50
2,00
2,00
4,00
3,00
1,78
5,00
1,00
3,00
3,00
1,30
2,00
12,00
1,02
1,30
1,02
3,00
5,70
7,00
3,00
2,40
2,40
5,70
Parker
No.
6-747
6-748
6-749
6-750
6-751
6-752
6-753
6-754
6-755
6-756
6-757
6-758
6-759
6-760
6-762
6-763
6-764
6-766
6-767
6-768
6-769
6-772
6-773
6-774
6-775
6-777
6-778
6-779
6-780
6-781
6-782
6-783
6-784
6-785
6-786
6-787
6-788
6-790
6-791
6-792
6-793
6-794
6-797
6-798
6-799
6-800
6-801
6-802
Ød
mm
196,00
5,70
26,00
45,90
5,30
34,65
39,50
76,00
18,00
148,00
73,00
19,75
43,25
31,95
107,31
89,60
59,60
31,70
109,40
119,60
114,40
44,70
155,00
12,00
515,00
10,60
53,00
19,00
21,20
28,00
38,70
45,00
32,50
56,00
67,00
71,00
80,00
80,00
50,00
61,00
20,00
28,00
2,00
19,00
468,00
500,00
21,20
33,50
Cross
sect. d2
4,00
1,05
2,50
1,50
2,40
2,60
2,60
2,50
5,00
10,00
4,00
2,50
2,60
2,60
6,99
5,70
5,85
3,50
3,10
5,70
3,10
3,50
10,00
2,50
10,00
1,80
1,80
2,65
2,65
2,65
2,65
2,65
3,55
3,55
3,55
3,55
3,55
1,80
4,50
5,00
1,80
1,80
1,00
1,80
6,00
8,00
3,55
2,65
59
Parker
No.
6-803
6-804
6-805
6-806
6-807
6-808
6-809
6-810
6-812
6-813
6-814
6-815
6-816
6-817
6-818
6-819
6-820
6-821
6-822
6-823
6-824
6-825
6-826
6-827
6-831
6-832
6-833
6-834
6-835
6-836
6-837
6-838
6-839
6-839
6-840
6-841
6-842
6-844
6-845
6-845
6-846
6-848
6-849
6-850
6-851
6-852
6-853
6-854
Ød
mm
30,00
92,50
77,00
105,00
370,00
20,00
43,70
54,50
133,50
341,00
164,20
109,20
670,00
590,00
160,00
54,00
79,00
83,00
85,00
10,00
69,00
27,00
78,00
470,00
590,00
96,00
137,00
484,86
449,50
543,50
109,20
32,00
10,10
10,10
282,37
175,00
255,00
135,00
42,50
42,50
234,20
18,14
4,80
32,00
61,00
64,39
85,00
298,00
Cross
sect. d2
3,55
3,55
2,00
3,50
5,50
3,55
1,80
2,65
12,00
14,00
5,84
5,84
10,00
10,00
4,00
3,00
1,50
1,00
1,50
2,65
3,00
3,20
3,50
10,00
3,50
9,00
4,00
3,53
6,99
6,99
5,70
4,00
1,78
1,78
3,53
10,00
4,00
4,00
1,80
1,80
7,00
1,78
0,75
2,50
2,00
1,78
4,00
2,62
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-855
6-856
6-857
6-861
6-862
6-863
6-864
6-865
6-866
6-867
6-868
6-869
6-871
6-872
6-873
6-874
6-875
6-876
6-877
6-878
6-879
6-880
6-881
6-882
6-883
6-884
6-885
6-887
6-889
6-890
6-891
6-892
6-893
6-894
6-895
6-896
6-897
6-898
6-899
6-900
6-902
6-903
6-904
6-905
6-906
6-907
6-909
6-910
Ød
mm
6,30
7,50
16,00
5,80
180,00
95,00
238,00
201,00
9,30
89,20
195,00
32,00
260,00
150,00
112,00
95,00
41,60
16,50
22,00
245,00
54,00
2,30
37,00
45,00
60,00
68,00
80,50
172,00
174,30
870,00
16,00
400,00
52,20
27,00
359,20
257,20
380,00
429,00
70,00
83,00
130,00
110,00
13,00
28,00
1,00
6,80
449,00
10,00
Cross
sect. d2
1,80
1,80
1,80
0,75
10,00
4,00
4,00
4,00
1,50
5,70
3,50
2,00
5,00
4,00
4,00
5,00
2,40
1,00
4,00
3,00
4,00
1,30
3,00
1,00
1,20
3,00
4,00
3,00
3,50
8,00
2,65
5,00
5,70
2,50
13,80
14,00
6,00
6,00
5,00
3,00
5,00
3,00
1,30
1,00
1,00
1,80
12,00
2,62
Parker
No.
6-911
6-912
6-913
6-914
6-915
6-916
6-917
6-918
6-919
6-920
6-921
6-922
6-923
6-924
6-925
6-927
6-928
6-929
6-930
6-931
6-932
6-933
6-934
6-935
6-936
6-937
6-938
6-939
6-940
6-941
6-942
6-943
6-944
6-945
6-946
6-947
6-948
6-949
6-950
6-951
6-952
6-953
6-954
6-955
6-956
6-957
6-958
6-959
Ød
mm
165,00
49,20
27,20
34,00
110,00
25,00
296,00
234,10
515,90
195,50
76,00
7,00
36,00
900,00
2,06
380,00
11,50
13,30
477,00
10,00
150,00
6,40
401,71
307,57
272,64
7,00
409,00
434,00
15,30
68,00
23,60
748,50
46,00
11,50
17,00
325,00
274,00
223,00
5,50
526,00
9,50
11,00
214,63
5,00
7,10
25,60
20,00
7,00
Cross
sect. d2
2,00
3,00
3,00
3,00
5,00
2,50
6,00
8,40
6,00
12,00
3,00
1,40
3,00
10,00
0,66
8,00
1,50
2,40
10,50
6,50
2,00
1,30
3,53
3,53
3,53
2,35
6,99
6,99
2,20
5,00
2,90
7,00
4,00
2,50
3,00
5,33
5,33
5,33
2,00
6,99
1,00
3,00
2,18
1,75
2,00
1,93
4,00
1,20
60
Parker
No.
6-960
6-961
6-962
6-963
6-964
6-965
6-966
6-967
6-968
6-969
6-970
6-972
6-973
6-974
6-975
6-976
6-977
6-978
6-979
6-980
6-981
6-982
6-983
6-984
6-985
6-986
6-988
6-990
6-991
6-992
6-993
6-994
6-995
6-996
6-997
6-998
6-999
6-1000
6-1001
6-1002
6-1003
6-1004
6-1005
6-1006
6-1007
6-1008
6-1010
6-1012
Ød
mm
5,61
122,00
151,00
93,00
50,00
10,40
2,50
245,00
5,50
25,00
37,00
40,82
3,50
17,00
44,83
10,50
28,00
78,00
72,00
36,00
36,00
114,00
164,20
2965,00
56,00
635,00
270,00
69,00
86,00
79,30
35,00
4,00
105,00
43,00
45,00
19,00
23,00
29,00
75,00
78,00
120,00
172,00
114,20
102,00
187,10
463,00
249,30
84,30
Cross
sect. d2
1,68
3,00
4,00
4,00
3,00
1,00
1,00
10,85
1,50
3,00
1,50
2,59
0,80
3,50
2,67
1,50
3,00
2,50
2,50
1,50
2,00
3,00
5,70
7,00
3,00
9,00
5,33
2,50
2,62
2,62
3,20
3,00
4,00
3,00
3,00
3,00
2,00
3,00
4,00
5,00
6,00
6,00
5,70
6,00
8,40
7,00
5,70
5,70
O-Ring Guide
Parker Hannifin
Parker
No.
6-1013
6-1014
6-1015
6-1016
6-1017
6-1018
6-1019
6-1020
6-1021
6-1022
6-1023
6-1024
6-1025
6-1026
6-1027
6-1028
6-1029
6-1030
6-1031
6-1032
6-1033
6-1034
6-1035
6-1036
6-1037
6-1038
6-1039
6-1039
6-1040
6-1041
6-1042
6-1043
6-1044
6-1045
6-1046
6-1047
6-1048
6-1049
6-1050
6-1051
6-1052
6-1053
6-1054
6-1055
6-1056
6-1057
6-1058
6-1059
Ød
mm
72,00
85,00
132,00
87,20
613,92
289,42
2,35
46,00
16,00
6,75
40,00
53,00
38,00
5,00
24,00
185,00
94,00
248,00
28,00
7,70
2,80
61,00
5,00
4,60
65,00
39,00
16,30
16,30
18,00
47,00
261,00
338,00
190,00
162,00
145,00
34,00
218,00
14,00
218,00
142,00
88,00
65,00
44,00
103,00
93,00
80,00
185,00
47,00
Cross
sect. d2
4,00
3,00
4,00
5,70
6,99
5,87
1,00
3,00
4,00
1,78
5,00
3,50
3,50
1,00
3,00
5,00
4,00
5,00
5,00
2,00
1,60
4,00
2,50
2,00
5,00
3,00
2,40
2,40
2,20
2,50
6,00
6,00
4,00
2,50
5,00
1,00
5,80
1,10
6,00
4,00
4,00
4,00
3,00
5,00
5,00
4,00
3,00
4,00
Parker
No.
6-1060
6-1061
6-1062
6-1063
6-1064
6-1065
6-1066
6-1067
6-1068
6-1069
6-1070
6-1071
6-1072
6-1073
6-1074
6-1075
6-1076
6-1077
6-1078
6-1079
6-1080
6-1081
6-1082
6-1083
6-1084
6-1085
6-1086
6-1087
6-1088
6-1089
6-1090
6-1091
6-1092
6-1093
6-1094
6-1095
6-1096
6-1097
6-1098
6-1099
6-1100
6-1101
6-1102
6-1103
6-1104
6-1105
6-1106
6-1107
Ød
mm
43,00
92,00
95,00
220,00
22,20
55,00
1960,00
2072,00
175,00
77,10
49,20
755,00
465,00
128,00
105,00
75,00
120,00
81,00
23,00
750,00
485,00
160,00
26,00
22,00
130,00
135,00
22,30
36,20
180,00
99,20
336,00
20,00
38,00
142,00
63,00
94,00
129,00
170,00
179,20
15,00
35,00
360,00
5,69
90,00
62,00
116,50
108,00
152,00
Cross
sect. d2
4,00
4,00
4,50
5,00
3,00
3,00
10,85
10,00
6,00
2,62
5,70
5,00
5,00
5,00
5,00
3,00
4,00
4,00
1,50
5,00
5,00
5,00
3,00
3,00
4,00
5,00
2,40
3,00
4,00
5,70
7,00
5,00
3,00
6,00
6,00
3,00
4,00
4,00
5,70
4,00
1,50
7,50
1,14
7,00
4,00
1,78
8,00
8,00
61
Parker
No.
6-1108
6-1109
6-1110
6-1111
6-1112
6-1113
6-1114
6-1115
6-1116
6-1117
6-1118
6-1119
6-1120
6-1121
6-1122
6-1123
6-1124
6-1125
6-1126
6-1127
6-1128
6-1129
6-1130
6-1131
6-1132
6-1133
6-1134
6-1135
6-1136
6-1137
6-1138
6-1139
6-1140
6-1141
6-1142
6-1143
6-1144
6-1145
6-1146
6-1147
6-1148
6-1149
6-1150
6-1151
6-1152
6-1153
6-1154
6-1155
Ød
mm
180,52
17,20
180,00
88,00
23,00
90,00
40,00
22,00
35,00
62,00
210,00
180,00
3,00
185,00
9,00
64,20
35,15
311,00
329,00
580,50
460,00
335,00
840,50
835,50
250,00
9,52
84,00
345,00
140,00
57,00
33,00
200,00
36,00
47,00
360,00
124,00
41,00
56,00
31,50
150,00
39,40
6,50
34,40
115,00
79,20
206,00
136,00
245,00
Cross
sect. d2
5,33
3,00
6,00
8,00
3,00
2,50
6,00
1,30
3,00
6,00
4,00
8,00
2,70
6,00
3,00
5,70
3,15
10,00
10,00
3,53
5,34
7,00
7,00
7,00
8,00
1,78
3,50
5,00
5,00
4,00
3,00
5,00
3,00
2,00
4,00
4,00
1,50
4,00
3,15
6,00
2,10
1,20
2,10
2,00
5,70
7,00
4,00
5,00
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-1156
6-1157
6-1158
6-1159
6-1160
6-1161
6-1162
6-1163
6-1164
6-1165
6-1166
6-1167
6-1168
6-1169
6-1170
6-1171
6-1172
6-1173
6-1174
6-1175
6-1176
6-1177
6-1178
6-1179
6-1180
6-1181
6-1182
6-1183
6-1184
6-1185
6-1186
6-1187
6-1188
6-1189
6-1190
6-1191
6-1192
6-1193
6-1194
6-1195
6-1196
6-1196
6-1197
6-1198
6-1199
6-1200
6-1201
6-1202
Ød
mm
890,00
615,00
520,00
115,00
695,00
160,00
63,00
102,00
114,00
88,00
35,00
248,00
300,00
115,00
515,00
315,00
320,62
764,00
85,00
104,50
46,00
172,00
45,00
90,00
120,00
80,00
112,00
7,50
54,00
52,50
55,00
37,00
37,00
43,00
266,00
290,00
55,00
66,00
70,00
45,00
48,00
48,00
34,00
13,30
125,00
104,00
260,00
13,30
Cross
sect. d2
5,00
5,00
5,00
5,00
5,00
5,00
3,50
4,00
5,00
6,00
4,00
7,00
6,00
5,00
5,00
5,00
3,53
6,99
6,00
3,00
2,00
4,00
4,00
4,00
5,00
5,00
7,00
2,10
2,00
1,80
4,00
3,00
2,00
2,00
4,00
5,00
3,50
3,00
4,00
4,50
4,00
4,00
2,00
1,20
4,00
5,30
8,00
3,00
Parker
No.
6-1203
6-1204
6-1205
6-1206
6-1207
6-1208
6-1209
6-1210
6-1211
6-1212
6-1213
6-1214
6-1215
6-1216
6-1217
6-1218
6-1219
6-1220
6-1221
6-1222
6-1223
6-1224
6-1225
6-1226
6-1227
6-1228
6-1229
6-1230
6-1231
6-1232
6-1233
6-1234
6-1235
6-1236
6-1237
6-1238
6-1239
6-1240
6-1241
6-1242
6-1243
6-1244
6-1245
6-1246
6-1247
6-1248
6-1249
6-1250
Ød
mm
30,00
24,69
362,00
9,50
142,00
10,90
62,00
320,00
228,00
70,00
1005,00
90,00
780,00
10,00
131,50
340,00
480,00
610,00
500,00
770,00
860,00
42,00
222,00
50,00
252,00
8,50
564,30
10,80
260,00
26,00
145,00
52,00
336,00
11,00
100,00
194,00
238,00
285,00
385,00
415,00
480,00
585,00
735,00
853,00
1,53
46,00
7,30
225,00
Cross
sect. d2
2,15
1,78
5,00
2,50
12,00
1,20
3,53
3,00
3,00
8,00
15,00
5,00
7,00
1,60
4,00
4,00
4,00
4,00
5,00
7,00
3,00
5,00
7,00
5,00
4,00
2,00
6,99
1,90
4,00
1,50
4,00
2,50
5,33
1,00
8,00
14,00
14,00
14,10
14,20
14,20
14,00
14,00
15,00
20,00
0,97
5,00
3,40
3,00
62
Parker
No.
6-1251
6-1252
6-1253
6-1254
6-1255
6-1256
6-1257
6-1258
6-1259
6-1260
6-1261
6-1262
6-1263
6-1264
6-1265
6-1266
6-1267
6-1268
6-1269
6-1270
6-1271
6-1272
6-1273
6-1274
6-1275
6-1276
6-1277
6-1278
6-1279
6-1280
6-1281
6-1282
6-1283
6-1284
6-1285
6-1286
6-1287
6-1288
6-1289
6-1290
6-1291
6-1292
6-1293
6-1294
6-1295
6-1296
6-1297
6-1298
Ød
mm
6,36
21,00
49,00
368,00
343,00
440,00
37,50
330,00
26,00
192,00
62,00
632,00
246,00
2,20
90,00
7,30
40,00
6,30
1,50
80,00
56,70
68,00
66,00
54,00
11,60
19,00
135,00
299,50
273,60
180,00
125,00
238,00
195,00
240,00
49,20
8,65
4,00
14,00
24,50
170,00
4,50
160,00
230,00
155,00
150,00
130,00
9,50
17,86
Cross
sect. d2
0,72
4,00
2,00
6,00
6,00
4,00
4,00
5,00
4,00
4,00
4,00
6,00
4,00
1,00
4,80
2,40
5,00
2,40
0,60
3,00
3,00
4,00
5,00
2,00
2,20
1,00
3,00
5,00
5,00
5,00
2,50
10,00
5,00
8,00
3,53
2,80
1,80
1,00
3,15
5,00
2,25
6,00
8,00
3,00
5,00
3,00
2,00
2,62
O-Ring Guide
Parker Hannifin
Parker
No.
6-1299
6-1300
6-1301
6-1302
6-1303
6-1304
6-1305
6-1306
6-1307
6-1308
6-1309
6-1310
6-1311
6-1312
6-1313
6-1314
6-1315
6-1316
6-1317
6-1318
6-1319
6-1320
6-1321
6-1322
6-1323
6-1324
6-1325
6-1326
6-1327
6-1328
6-1329
6-1330
6-1333
6-1334
6-1335
6-1336
6-1337
6-1338
6-1339
6-1340
6-1341
6-1342
6-1345
6-1346
6-1347
6-1348
6-1349
6-1350
Ød
mm
540,00
579,00
602,00
216,00
99,00
1840,00
100,00
97,00
200,00
640,00
740,00
300,00
21,00
6,00
11,50
9,50
22,00
80,00
53,80
155,00
42,00
107,00
7,10
116,00
11,60
155,00
1865,00
410,00
6,00
383,60
134,00
12,00
51,94
340,00
412,00
167,50
11,10
23,80
13,70
15,50
17,20
14,00
14,00
240,00
53,00
73,00
44,30
104,30
Cross
sect. d2
5,00
5,00
5,00
4,00
3,00
5,00
3,00
5,00
4,00
6,00
6,00
10,00
3,00
1,52
2,00
1,78
2,10
3,50
4,00
4,00
4,00
8,00
3,60
3,00
1,20
5,00
5,00
6,00
2,50
5,00
8,00
10,60
3,53
10,00
8,00
3,50
1,82
2,40
2,50
2,60
1,82
1,82
1,60
5,00
2,00
7,00
5,70
5,70
Parker
No.
6-1351
6-1352
6-1353
6-1354
6-1356
6-1357
6-1358
6-1359
6-1360
6-1361
6-1362
6-1363
6-1364
6-1365
6-1366
6-1367
6-1368
6-1369
6-1370
6-1371
6-1372
6-1373
6-1374
6-1375
6-1376
6-1377
6-1378
6-1379
6-1380
6-1381
6-1384
6-1385
6-1386
6-1387
6-1388
6-1389
6-1390
6-1391
6-1392
6-1393
6-1394
6-1395
6-1396
6-1397
6-1398
6-1399
6-1400
6-1401
Ød
mm
309,30
419,30
21,00
58,00
175,00
75,00
0,90
304,80
236,00
12,10
39,20
3,90
17,50
17,00
30,00
110,00
60,00
76,00
300,00
310,00
65,00
20,00
395,00
21,20
11,20
65,00
28,20
12,50
68,00
105,00
240,66
5,60
11,00
390,00
256,00
38,00
155,00
192,00
354,96
14,70
5,15
100,00
15,08
11,60
15,00
42,00
7,00
31,00
Cross
sect. d2
5,70
5,70
1,00
3,00
5,00
2,50
0,53
3,18
6,00
1,60
5,70
2,40
4,00
4,00
5,00
2,50
4,50
2,00
8,00
5,00
1,80
2,65
12,00
1,80
1,80
2,65
1,00
1,80
3,50
3,00
7,40
1,80
3,40
4,00
4,00
1,50
3,53
8,00
6,09
3,50
1,80
6,00
2,62
2,7
3,50
4,50
2,75
2,00
63
Parker
No.
6-1402
6-1403
6-1404
6-1405
6-1406
6-1407
6-1408
6-1409
6-1410
6-1411
6-1412
6-1413
6-1414
6-1415
6-1416
6-1417
6-1418
6-1419
6-1420
6-1421
6-1422
6-1422
6-1423
6-1424
6-1425
6-1426
6-1427
6-1428
6-1429
6-1430
6-1431
6-1432
6-1433
6-1434
6-1435
6-1436
6-1437
6-1438
6-1439
6-1440
6-1441
6-1442
6-1443
6-1444
6-1445
6-1446
6-1447
6-1448
Ød
mm
165,00
265,00
325,00
4,05
85,00
9,50
331,50
534,00
1,00
33,00
38,00
43,00
35,00
97,00
8,10
77,00
661,00
62,00
500,00
115,00
7,65
7,65
29,00
297,00
220,00
238,00
120,00
185,00
91,00
19,35
23,00
16,00
23,00
5,00
440,00
131,00
50,00
54,70
61,70
9,55
272,40
270,00
675,00
490,00
85,00
21,30
27,00
55,00
Cross
sect. d2
4,00
5,00
5,00
1,77
6,99
1,80
6,00
8,00
0,63
3,50
5,00
5,50
5,00
4,00
2,00
2,50
14,00
1,50
6,00
6,00
2,00
2,00
2,50
4,00
7,00
6,00
10,00
4,00
2,00
1,00
4,00
6,00
6,00
1,60
4,30
5,30
3,50
3,53
4,50
1,75
6,99
7,00
5,30
5,00
5,00
2,30
2,70
5,00
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-1449
6-1450
6-1451
6-1452
6-1453
6-1454
6-1455
6-1456
6-1457
6-1458
6-1459
6-1460
6-1461
6-1462
6-1463
6-1464
6-1465
6-1466
6-1467
6-1468
6-1469
6-1470
6-1471
6-1472
6-1473
6-1474
6-1475
6-1476
6-1477
6-1478
6-1479
6-1480
6-1481
6-1482
6-1483
6-1484
6-1485
6-1486
6-1487
6-1488
6-1488
6-1489
6-1490
6-1491
6-1492
6-1493
6-1494
6-1495
Ød
mm
10,00
198,00
235,00
92,00
195,00
11,50
94,00
24,60
86,00
320,00
22,42
10,20
31,57
70,00
19,50
14,50
20,50
12,00
77,50
11,75
12,00
21,00
6,00
82,00
128,00
30,00
78,00
275,00
285,00
31,00
3,15
17,70
8,56
39,00
47,00
13,00
11,80
42,00
9,20
5,00
5,00
50,20
20,50
10,10
11,30
16,50
15,70
1,45
Cross
sect. d2
8,00
4,00
4,00
3,00
6,00
2,30
3,50
3,40
4,00
6,50
1,78
1,50
1,98
2,50
3,50
3,00
2,00
1,30
2,62
1,55
1,40
1,50
1,80
3,00
3,00
2,25
2,00
5,00
5,00
1,50
1,50
1,78
1,07
5,00
5,50
1,58
2,65
1,00
2,70
1,90
1,90
3,00
3,00
1,60
1,50
2,00
2,50
1,75
Parker
No.
6-1496
6-1497
6-1498
6-1499
6-1499
6-1500
6-1501
6-1502
6-1503
6-1504
6-1505
6-1506
6-1507
6-1508
6-1509
6-1510
6-1511
6-1512
6-1513
6-1514
6-1515
6-1516
6-1517
6-1518
6-1519
6-1520
6-1521
6-1522
6-1523
6-1524
6-1525
6-1526
6-1527
6-1528
6-1529
6-1530
6-1531
6-1532
6-1533
6-1534
6-1535
6-1536
6-1537
6-1538
6-1539
6-1540
6-1541
6-1542
Ød
mm
3,90
40,00
11,50
9,60
9,60
7,52
5,46
9,78
12,83
13,59
10,78
1,42
92,20
88,50
118,00
11,10
9,50
32,00
54,00
10,00
119,60
11,00
29,10
10,00
7,50
44,35
450,00
255,00
7,10
16,30
11,10
13,00
7,40
621,00
165,00
9,10
9,10
3,50
28,00
245,00
47,00
11,30
14,20
7,60
8,55
27,50
15,50
9,50
Cross
sect. d2
1,80
4,00
1,80
2,00
2,00
3,51
0,89
1,27
1,27
2,69
2,62
1,58
2,62
6,50
4,00
2,15
2,15
1,50
1,50
0,50
3,20
1,60
1,60
1,20
1,50
2,58
2,62
5,00
1,37
1,40
1,60
1,30
3,70
8,50
5,00
1,60
1,65
1,35
4,00
7,00
2,62
2,20
1,90
1,90
1,75
2,00
1,50
1,50
64
Parker
No.
6-1543
6-1544
6-1545
6-1546
6-1547
6-1548
6-1549
6-1550
6-1551
6-1552
6-1553
6-1553
6-1554
6-1555
6-1556
6-1557
6-1558
6-1559
6-1560
6-1561
6-1562
6-1563
6-1564
6-1565
6-1566
6-1567
6-1568
6-1569
6-1570
6-1571
6-1572
6-1573
6-1574
6-1575
6-1576
6-1577
6-1578
6-1579
6-1580
6-1581
6-1582
6-1583
6-1584
6-1585
6-1586
6-1587
6-1588
6-1589
Ød
mm
18,80
2,96
24,50
328,00
39,00
15,10
18,20
22,20
28,30
54,40
152,00
152,00
70,00
14,00
32,00
2,97
7,00
136,00
221,00
10,20
8,00
198,00
240,00
205,00
12,00
12,50
3,80
17,30
7,50
13,50
126,00
86,50
19,00
11,50
14,00
736,60
31,00
16,50
110,00
6,07
250,00
350,00
430,00
59,20
18,00
52,00
65,00
38,00
Cross
sect. d2
1,90
1,04
1,00
6,99
2,50
2,60
2,60
3,10
3,10
4,25
1,78
1,78
3,50
2,20
1,50
1,03
1,47
3,00
1,78
1,80
1,60
8,00
8,00
5,00
1,20
1,50
1,90
2,20
3,00
1,50
5,10
4,00
2,42
1,78
1,30
5,00
4,00
1,50
1,50
1,30
10,00
10,00
16,00
5,70
10,00
1,00
1,00
1,00
O-Ring Guide
Parker Hannifin
Parker
No.
6-1590
6-1591
6-1592
6-1593
6-1594
6-1595
6-1596
6-1597
6-1598
6-1599
6-1600
6-1601
6-1602
6-1603
6-1604
6-1605
6-1606
6-1607
6-1608
6-1609
6-1610
6-1611
6-1612
6-1613
6-1614
6-1615
6-1616
6-1617
6-1618
6-1619
6-1620
6-1621
6-1622
6-1623
6-1624
6-1625
6-1626
6-1627
6-1628
6-1629
6-1630
6-1631
6-1632
6-1633
6-1634
6-1635
6-1636
6-1637
Ød
mm
21,50
129,00
142,90
165,10
152,40
12,10
15,10
18,20
22,20
28,30
35,40
42,40
54,40
14,10
16,10
156,00
16,00
67,00
538,00
74,60
17,64
23,47
164,00
27,00
33,00
0,83
159,00
34,00
21,00
19,00
65,00
14,00
86,00
20,00
82,20
154,60
57,20
30,00
73,00
88,00
122,00
34,00
145,00
47,00
32,50
11,80
13,00
9,55
Cross
sect. d2
1,00
1,50
3,20
3,20
3,20
2,35
2,60
2,68
3,10
3,10
3,25
4,25
4,25
2,50
3,00
4,00
1,30
4,00
6,00
3,53
2,00
2,40
2,00
1,40
5,00
1,63
6,00
5,00
2,50
4,00
2,50
4,00
3,00
3,15
5,70
1,78
2,70
1,00
2,00
5,00
6,00
2,50
2,50
3,00
3,00
1,80
1,80
1,75
Parker
No.
6-1638
6-1639
6-1640
6-1641
6-1642
6-1643
6-1644
6-1646
6-1647
6-1648
6-1649
6-1650
6-1651
6-1652
6-1653
6-1654
6-1655
6-1656
6-1657
6-1658
6-1659
6-1660
6-1661
6-1662
6-1663
6-1664
6-1665
6-1666
6-1667
6-1668
6-1669
6-1670
6-1671
6-1672
6-1673
6-1674
6-1675
6-1676
6-1677
6-1678
6-1679
6-1680
6-1681
6-1682
6-1683
6-1684
6-1685
6-1686
Ød
mm
20,95
351,21
10,00
546,00
7,60
54,00
110,00
190,00
7,30
10,00
46,00
35,50
112,00
36,00
198,00
224,00
26,50
9,86
53,50
14,40
171,45
115,00
64,00
77,50
294,00
1,33
94,00
58,00
278,99
246,00
37,25
2,00
110,00
93,40
95,00
455,00
79,50
24,50
3,80
571,00
223,00
147,60
2,20
17,20
6,10
50,30
18,40
18,40
Cross
sect. d2
2,62
4,00
4,00
2,62
2,10
3,15
3,50
10,00
1,00
1,25
1,50
4,00
2,50
5,00
3,00
6,00
4,00
1,78
2,00
2,00
3,20
5,33
4,00
2,00
3,00
1,61
5,70
3,75
2,62
3,00
2,62
1,40
6,00
2,57
3,00
6,00
2,65
4,00
1,50
8,00
2,65
2,65
0,80
1,50
1,60
2,50
2,29
2,40
65
Parker
No.
6-1687
6-1688
6-1689
6-1690
6-1691
6-1692
6-1693
6-1694
6-1695
6-1696
6-1697
6-1698
6-1699
6-1700
6-1701
6-1702
6-1703
6-1704
6-1705
6-1706
6-1707
6-1708
6-1709
6-1710
6-1711
6-1712
6-1713
6-1714
6-1715
6-1716
6-1717
6-1718
6-1719
6-1720
6-1721
6-1722
6-1723
6-1724
6-1725
6-1726
6-1727
6-1728
6-1729
6-1730
6-1731
6-1732
6-1733
6-1734
Ød
mm
18,40
18,60
18,40
18,60
18,80
18,80
18,80
4,30
55,00
145,00
71,00
29,00
9,80
17,00
2,50
160,00
56,50
69,20
88,40
180,00
320,00
98,00
55,00
23,00
37,50
38,00
36,00
8,40
83,00
635,00
12,30
11,00
22,60
102,40
51,10
21,10
43,70
44,96
208,00
60,00
230,00
5,50
28,68
9,30
17,22
6,30
10,70
8,00
Cross
sect. d2
2,53
2,29
2,40
2,53
2,29
2,40
2,53
2,40
1,20
2,88
3,55
2,00
1,50
2,50
1,60
5,30
5,30
5,30
5,30
5,30
3,53
2,50
2,50
1,60
1,80
2,65
2,65
1,50
4,00
10,00
1,90
1,90
1,78
5,70
1,60
1,60
3,55
2,57
4,00
2,00
4,50
0,80
2,40
2,20
1,00
2,00
1,90
3,50
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-1735
6-1736
6-1737
6-1738
6-1739
6-1740
6-1741
6-1742
6-1743
6-1744
6-1745
6-1746
6-1747
6-1748
6-1749
6-1750
6-1751
6-1752
6-1753
6-1754
6-1755
6-1756
6-1757
6-1758
6-1759
6-1760
6-1761
6-1762
6-1763
6-1764
6-1765
6-1766
6-1767
6-1768
6-1769
6-1770
6-1771
6-1772
6-1773
6-1774
6-1775
6-1776
6-1777
6-1778
6-1779
6-1780
6-1781
6-1782
Ød
Cross
mm sect. d2
0,70
0,50
97,50
3,55
9,70
2,50
28,90
2,87
2,80
1,50
70,50
3,20
56,87
1,78
690,00
8,00
5,60
1,90
4,80
1,30
7,60
2,62
12,00
1,13
15,30
1,50
16,00
1,90
9,96
1,53
75,65
2,70
6,10
1,60
4,30
1,30
460,00
6,99
494,16
6,99
323,00
5,33
374,00
5,33
455,00
5,33
511,00
5,33
595,00
5,33
874,00
5,33
975,00
5,33
2330,00 10,00
2500,00 10,00
4,40
0,80
17,00
1,93
14,50
1,50
230,00
4,80
24,50
5,50
31,50
7,00
15,50
4,00
74,50
3,00
19,50
4,00
153,50
3,20
148,60
3,20
131,10
3,20
86,00
3,20
90,80
3,50
70,00
3,50
87,60
3,00
33,00
1,50
95,00
1,50
90,00
1,50
Parker
No.
6-1783
6-1784
6-1785
6-1786
6-1787
6-1788
6-1789
6-1790
6-1791
6-1792
6-1793
6-1794
6-1795
6-1796
6-1797
6-1798
6-1799
6-1800
6-1801
6-1802
6-1803
6-1804
6-1805
6-1806
6-1807
6-1808
6-1809
6-1810
6-1811
6-1812
6-1813
6-1814
6-1815
6-1816
6-1817
6-1818
6-1819
6-1820
6-1821
6-1822
6-1823
6-1824
6-1825
6-1826
6-1827
6-1828
6-1829
6-1830
Ød
Cross
mm sect. d2
135,00
1,50
329,57
4,80
8,73
1,78
365,00
5,30
532,18
5,33
890,00
5,33
3000,00
5,33
702,66
5,33
2250,00
5,33
1678,90
5,33
1210,91
5,33
623,08
5,33
359,53
5,33
425,35
5,33
67,39
2,26
715,00
5,33
955,00
5,33
2390,00
6,00
1615,00
5,00
1950,00
5,33
151,39
2,57
83,77
1,78
35,96
2,32
20,20
1,81
136,53
1,78
35,95
1,78
14,23
1,60
4,32
0,92
545,00
7,00
582,68
7,00
14,47
3,53
2,95
0,97
163,07
1,63
183,00
1,78
14,20
3,00
21,20
3,60
17,20
4,00
32,97
4,02
715,00
5,33
13,00
2,62
522,00
10,00
623,08
5,33
13,30
1,80
114,55
2,57
13,30
2,80
14,60
2,10
508,00
5,33
552,00
5,33
66
Parker
No.
6-1831
6-1832
6-1833
6-1834
6-1835
6-1836
6-1837
6-1838
6-1839
6-1840
6-1841
6-1842
6-1843
6-1844
6-1845
6-1846
6-1847
6-1848
6-1849
6-1850
6-1851
6-1852
6-1853
6-1854
6-1855
6-1856
6-1857
6-1858
6-1859
6-1860
6-1861
6-1862
6-1863
6-1864
6-1865
6-1866
6-1867
6-1868
6-1869
6-1870
6-1871
6-1872
6-1873
6-1874
6-1875
6-1876
6-1877
6-1878
Ød
Cross
mm sect. d2
640,00
2,62
19,84
0,79
7,40
2,62
11,20
2,62
14,50
1,40
362,00
4,00
515,00
5,33
532,18
5,33
34,00
4,00
745,00
10,00
618,50
2,00
367,89
2,66
455,00
5,33
595,00
5,33
2324,00
6,99
2350,00
6,99
736,00
7,00
190,00
1,78
205,00
1,78
94,40
3,10
425,33
5,33
955,00
7,00
639,00
4,00
48,00
1,00
9,70
5,33
11,82
2,62
14,90
2,70
602,00
7,00
640,00
7,00
259,20
3,53
245,00
3,53
27,50
1,00
6,00
1,20
59,50
5,00
164,33
2,62
206,00
5,70
215,00
5,00
270,00
6,00
19,50
2,66
83,00
2,00
20,90
3,00
13,50
3,00
11,50
3,00
15,50
1,90
21,50
1,60
67,00
2,80
11,00
2,30
6,80
3,10
O-Ring Guide
Parker Hannifin
Parker
No.
6-1879
6-1880
6-1881
6-1882
6-1883
6-1884
6-1885
6-1886
6-1887
6-1888
6-1889
6-1890
6-1891
6-1892
6-1893
6-1894
6-1895
6-1896
6-1897
6-1898
6-1899
6-1900
6-1901
6-1902
6-1903
6-1904
6-1905
6-1906
6-1907
6-1908
6-1909
6-1910
6-1911
6-1912
6-1913
6-1914
6-1915
6-1916
6-1917
6-1918
6-1919
6-1920
6-1921
6-1922
6-1923
6-1924
6-1925
6-1926
Ød
Cross
mm sect. d2
8,15
1,83
313,00
5,33
340,00
5,33
1029,00
8,30
2,00
1,50
15,50
1,78
22,00
2,30
7,10
1,84
28,57
1,52
355,00
8,00
74,90
1,78
34,00
1,10
92,00
1,40
5,96
1,70
9,11
2,00
62,00
2,40
239,20
3,53
226,20
3,53
45,00
6,00
7,65
1,81
10,20
2,35
14,00
2,38
18,80
2,70
14,50
2,00
43,00
3,50
90,00
5,50
100,00
5,50
30,00
3,50
45,00
3,50
68,00
5,50
72,00
5,50
95,00
5,50
23,00
2,62
40,00
3,50
47,00
5,00
53,00
4,00
28,00
3,50
75,00
4,50
70,00
5,50
349,00
5,33
27,00
2,80
32,00
3,50
23,00
2,60
11,30
4,75
14,20
2,00
3,30
1,78
4,09
1,78
35,00
3,50
Parker
No.
6-1927
6-1928
6-1929
6-1930
6-1931
6-1932
6-1933
6-1934
6-1935
6-1936
6-1937
6-1938
6-1939
6-1940
6-1941
6-1942
6-1943
6-1944
6-1945
6-1946
6-1947
6-1948
6-1949
6-1950
6-1951
6-1952
6-1953
6-1954
6-1955
6-1956
6-1957
6-1958
6-1959
6-1960
6-1961
6-1962
6-1963
6-1964
6-1965
6-1966
6-1967
6-1968
6-1969
6-1970
6-1971
6-1972
6-1973
6-1974
Ød
Cross
mm sect. d2
65,00
5,50
75,00
5,50
168,40
6,00
23,40
4,00
49,50
5,00
197,00
6,00
133,00
3,00
469,00
5,33
10,00
1,10
13,30
2,20
428,00
5,00
2,80
1,50
5,70
2,62
66,00
5,33
82,00
5,33
126,30
5,33
818,00
12,00
777,00
12,00
224,00
7,00
28,77
2,40
334,00
2,62
230,00
5,00
137,50
3,30
77,80
1,50
764,00
7,00
555,00
3,00
589,00
3,00
22,50
2,50
24,50
2,50
786,00
4,00
522,00
4,00
372,00
4,00
645,00
4,00
645,00
3,53
17,30
2,20
128,00
4,00
587,00
7,00
560,00
7,00
8,70
2,00
69,00
4,50
13,00
1,20
1590,00
6,99
1,50
0,25
60,00
1,50
9,20
2,20
79,00
2,00
100,00
1,00
66,00
1,50
67
Parker
No.
6-1975
6-1976
6-1977
6-1978
6-1979
6-1980
6-1981
6-1982
6-1983
6-1984
6-1985
6-1986
6-1987
6-1988
6-1989
6-1990
6-1991
6-1992
6-1993
6-1994
6-1995
6-1996
6-1997
6-1998
6-1999
6-2000
6-2001
6-2002
6-2003
6-2004
6-2005
6-2006
6-2007
6-2008
6-2009
6-2010
6-2011
6-2012
6-2013
6-2014
6-2015
6-2016
6-2017
6-2018
6-2019
6-2020
6-2021
6-2022
Ød
mm
19,30
177,00
8,50
11,80
484,00
36,00
50,00
3,20
4,76
51,63
58,00
2,24
30,00
132,70
221,60
125,00
52,39
68,00
250,00
16,82
30,00
204,00
214,00
650,00
113,00
135,50
58,00
520,00
532,00
4,20
276,00
553,00
36,50
45,30
855,00
55,30
20,00
74,00
335,00
105,00
470,00
58,00
99,39
43,00
58,00
38,00
148,00
150,00
Cross
sect. d2
2,20
3,00
3,00
3,00
8,40
4,00
1,50
1,78
1,78
1,78
2,50
2,62
2,62
2,62
2,62
3,50
3,53
3,53
4,00
5,33
5,33
5,33
5,33
5,33
7,00
6,00
3,55
3,00
3,00
1,00
2,62
5,33
2,00
1,93
10,00
5,70
9,00
2,50
5,00
2,62
4,50
3,55
3,30
5,00
3,55
4,00
2,50
2,50
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-2023
6-2024
6-2025
6-2026
6-2027
6-2028
6-2029
6-2030
6-2031
6-2032
6-2033
6-2034
6-2035
6-2036
6-2037
6-2038
6-2039
6-2040
6-2041
6-2042
6-2043
6-2044
6-2045
6-2046
6-2047
6-2048
6-2049
6-2050
6-2051
6-2052
6-2053
6-2054
6-2055
6-2056
6-2057
6-2058
6-2059
6-2060
6-2061
6-2062
6-2063
6-2064
6-2065
6-2066
6-2067
6-2068
Ød
mm
598,00
142,00
628,50
669,30
103,00
88,00
6,50
89,00
547,00
6,40
78,00
10,24
12,20
109,50
297,80
16,00
22,22
26,00
4,45
801,00
14,00
18,00
63,00
130,00
34,50
32,00
41,00
58,00
212,00
48,00
6,00
36,60
20,80
7,67
9,27
12,47
19,24
22,48
23,65
30,10
37,98
121,00
510,00
820,00
750,00
17,10
Cross
sect. d2
7,00
3,00
7,00
7,00
3,00
5,30
1,00
1,50
7,00
2,62
1,50
1,83
2,00
5,33
6,99
3,50
2,62
3,50
3,53
4,00
5,00
3,50
3,00
5,80
2,65
1,00
2,00
2,50
5,30
2,30
2,10
2,90
2,00
1,78
1,78
1,78
1,78
1,78
1,78
1,78
1,78
8,00
3,00
3,00
3,00
1,60
Parker
Ød
No.
mm
6-2069 12,30
6-2070 14,60
6-2071 11,00
6-2072 81,97
6-2073 492,00
Cross
sect. d2
3,50
2,95
3,50
3,53
3,53
68
O-Ring Guide
Parker Hannifin
Parker
No.
6-1735
2-001
6-408
6-1615
6-1358
6-1410
6-906
2-002
2-102
6-1664
2-003
6-1506
6-1495
6-1969
6-1269
6-369
6-1247
5-051
2-004
6-714
6-418
6-364
6-797
6-1670
6-1883
6-925
2-103
6-1681
6-1264
6-306
6-1986
6-880
6-1019
6-538
6-966
6-167
6-138
6-1701
6-168
2-005
5-578
6-020
6-1739
6-1938
6-1033
2-104
6-487
2-006
6-1814
6-1544
Ød
mm
0,70
0,74
0,80
0,83
0,90
1,00
1,00
1,07
1,24
1,33
1,42
1,42
1,45
1,50
1,50
1,50
1,53
1,78
1,78
1,80
1,85
1,98
2,00
2,00
2,00
2,06
2,06
2,20
2,20
2,20
2,24
2,30
2,35
2,40
2,50
2,50
2,50
2,50
2,50
2,57
2,60
2,70
2,80
2,80
2,80
2,84
2,90
2,90
2,95
2,96
Cross
sect. d2
0,50
1,02
1,60
1,63
0,53
0,63
1,00
1,27
2,62
1,61
1,52
1,58
1,75
0,25
0,60
1,00
0,97
1,02
1,78
1,00
1,50
0,84
1,00
1,40
1,50
0,66
2,62
0,80
1,00
1,60
2,62
1,30
1,00
1,90
1,00
1,20
1,30
1,60
1,70
1,78
1,90
1,50
1,50
1,50
1,60
2,62
1,02
1,78
0,97
1,04
Parker
No.
6-1557
6-018
6-549
6-441
6-615
6-1120
5-683
6-1479
6-736
6-684
6-686
6-1982
6-1924
6-361
6-307
5-190
6-1645
5-579
6-685
6-973
6-491
6-021
6-402
6-1532
6-468
2-105
2-007
6-251
6-1677
6-1568
6-166
6-1496
6-1363
6-613
6-019
6-035
6-1287
6-104
6-420
6-428
6-994
6-1405
6-1925
6-2004
5-580
6-1752
6-1694
6-1810
2-201
6-1764
Ød
mm
2,97
3,00
3,00
3,00
3,00
3,00
3,10
3,15
3,17
3,20
3,20
3,20
3,30
3,30
3,33
3,35
3,40
3,40
3,40
3,50
3,50
3,50
3,50
3,50
3,50
3,63
3,68
3,70
3,80
3,80
3,90
3,90
3,90
4,00
4,00
4,00
4,00
4,00
4,00
4,00
4,00
4,05
4,09
4,20
4,20
4,30
4,30
4,32
4,34
4,40
Cross
sect. d2
1,03
1,00
1,20
1,50
2,00
2,70
1,60
1,50
1,02
1,02
1,60
1,78
1,78
2,40
1,02
1,78
1,50
1,90
2,00
0,80
1,10
1,20
1,25
1,35
1,50
2,62
1,78
1,90
1,50
1,90
1,80
1,80
2,40
1,00
1,10
1,50
1,80
2,00
2,20
2,50
3,00
1,77
1,78
1,00
1,90
1,30
2,40
0,92
3,53
0,80
Parker
No.
2-106
6-2041
5-108
2-008
6-401
6-214
6-1291
6-1036
6-133
6-1983
6-849
6-1744
5-581
6-1026
6-583
6-069
6-1434
6-955
6-1488
6-110
6-1035
6-1394
2-107
2-009
6-751
6-738
6-063
6-1501
6-1728
6-968
6-950
6-1385
6-1743
6-338
6-960
6-1102
6-748
5-582
6-1939
6-548
6-861
2-202
6-1892
6-543
6-1863
6-713
6-038
6-1312
6-1471
6-001
Ød
mm
4,42
4,45
4,47
4,47
4,50
4,50
4,50
4,60
4,70
4,76
4,80
4,80
4,90
5,00
5,00
5,00
5,00
5,00
5,00
5,00
5,00
5,15
5,23
5,28
5,30
5,33
5,35
5,46
5,50
5,50
5,50
5,60
5,60
5,60
5,61
5,69
5,70
5,70
5,70
5,70
5,80
5,94
5,96
6,00
6,00
6,00
6,00
6,00
6,00
6,00
Cross
sect. d2
2,62
3,53
1,27
1,78
1,00
1,50
2,25
2,00
1,90
1,78
0,75
1,30
1,90
1,00
1,20
1,50
1,60
1,75
1,90
2,00
2,50
1,80
2,62
1,78
2,40
1,02
1,50
0,89
0,80
1,50
2,00
1,80
1,90
2,40
1,68
1,14
1,05
1,90
2,62
3,20
0,75
3,53
1,70
1,00
1,20
1,25
1,50
1,52
1,80
2,00
For articles printed in bold, fitting Parker Parbak® back-up rings are available from stock.
69
O-Ring Guide
Parker Hannifin
Sizing charts
Sizing charts – O-Ring sizes acc. to cross section d
Parker
No.
6-2053
6-1327
6-079
6-652
2-108
6-1581
3-902
2-010
6-1683
6-1751
6-344
6-374
6-855
6-1732
5-686
6-1268
6-1251
6-933
5-583
6-2032
6-2029
6-1149
6-581
6-572
6-480
6-1022
6-907
6-440
6-1878
5-052
6-657
6-959
6-922
6-1558
6-011
6-311
6-937
6-028
6-1400
6-080
6-1523
6-052
6-1886
6-956
6-1321
5-584
6-1647
6-1266
6-162
6-1249
Ød
mm
6,00
6,00
6,00
6,00
6,02
6,07
6,07
6,07
6,10
6,10
6,20
6,30
6,30
6,30
6,30
6,30
6,36
6,40
6,40
6,40
6,50
6,50
6,50
6,50
6,60
6,75
6,80
6,80
6,80
6,86
7,00
7,00
7,00
7,00
7,00
7,00
7,00
7,00
7,00
7,00
7,10
7,10
7,10
7,10
7,10
7,20
7,30
7,30
7,30
7,30
Cross
sect. d2
2,10
2,50
5,00
5,20
2,62
1,30
1,63
1,78
1,60
1,60
1,50
1,60
1,80
2,00
2,39
2,40
0,72
1,30
1,90
2,62
1,00
1,20
1,50
2,00
1,50
1,78
1,80
2,00
3,10
1,78
1,00
1,20
1,40
1,47
1,50
2,00
2,35
2,50
2,75
3,00
1,37
1,60
1,84
2,00
3,60
1,90
1,00
2,40
2,70
3,40
Parker
No.
6-1527
6-1833
6-710
6-661
6-091
6-1519
6-856
6-432
6-1183
6-134
6-1570
6-1500
2-203
2-109
6-1538
6-1642
6-1745
3-903
2-011
6-1898
6-2056
6-1422
6-1032
5-673
6-317
6-486
6-437
6-592
6-658
6-074
6-1562
5-585
6-002
6-520
6-564
6-390
6-1734
6-192
6-1416
5-664
6-1879
6-345
6-070
6-1714
6-692
6-1228
6-1977
6-1539
6-1481
6-1286
Ød
mm
7,40
7,40
7,50
7,50
7,50
7,50
7,50
7,50
7,50
7,50
7,50
7,52
7,52
7,59
7,60
7,60
7,60
7,65
7,65
7,65
7,67
7,65
7,70
7,75
7,80
7,80
8,00
8,00
8,00
8,00
8,00
8,00
8,00
8,00
8,00
8,00
8,00
8,10
8,10
8,13
8,15
8,20
8,30
8,40
8,50
8,50
8,50
8,55
8,56
8,65
Cross
sect. d2
3,70
2,62
1,00
1,25
1,50
1,50
1,80
2,00
2,10
2,50
3,00
3,51
3,53
2,62
1,90
2,10
2,62
1,63
1,78
1,81
1,78
2,00
2,00
1,88
3,60
4,60
1,00
1,25
1,40
1,50
1,60
1,88
2,00
2,20
2,50
3,00
3,50
1,60
2,00
1,78
1,83
1,50
2,40
1,50
1,50
2,00
3,00
1,75
1,07
2,80
Parker
No.
6-1965
6-1785
5-612
6-277
6-715
5-586
5-587
3-904
6-610
6-010
6-120
6-470
6-161
5-700
6-1122
6-651
6-1530
6-1531
6-1893
2-204
2-110
5-716
6-1971
6-1487
2-012
6-2057
6-866
6-1730
6-012
6-395
6-346
6-952
6-1542
6-1314
6-1407
6-1297
6-1511
6-1206
6-1133
6-373
6-1440
6-1637
6-1499
5-212
6-1737
6-1855
6-1502
6-1699
6-1656
5-614
Ød
mm
8,70
8,73
8,74
8,79
8,80
8,90
8,90
8,92
9,00
9,00
9,00
9,00
9,00
9,00
9,00
9,00
9,10
9,10
9,11
9,12
9,19
9,19
9,20
9,20
9,25
9,27
9,30
9,30
9,30
9,35
9,40
9,50
9,50
9,50
9,50
9,50
9,50
9,50
9,52
9,53
9,55
9,55
9,60
9,75
9,70
9,70
9,78
9,80
9,86
9,93
Cross
sect. d2
2,00
1,78
1,78
1,14
1,00
1,90
2,70
1,83
1,20
1,50
1,80
2,00
2,50
3,00
3,00
4,00
1,60
1,65
2,00
3,53
2,62
3,00
2,20
2,70
1,78
1,78
1,50
2,20
2,40
1,60
2,10
1,00
1,50
1,78
1,80
2,00
2,15
2,50
1,78
1,60
1,75
1,75
2,00
1,78
2,50
5,33
1,27
1,50
1,78
2,62
70
O-Ring Guide
Parker Hannifin
Parker
No.
6-1749
6-1514
6-1935
6-116
6-1518
6-1648
6-083
6-1216
6-003
6-532
6-105
6-910
6-823
6-605
6-1640
6-931
6-1449
6-627
6-1491
6-839
6-571
6-1460
6-1561
6-1899
6-2034
6-375
6-475
6-965
2-309
6-976
5-588
3-905
6-777
6-218
2-205
6-1733
2-111
6-1505
6-551
6-1230
2-013
6-1208
6-1236
6-084
6-1516
6-1718
6-086
6-1877
6-717
6-953
Ød
mm
9,96
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,00
10,10
10,10
10,10
10,15
10,20
10,20
10,20
10,24
10,25
10,30
10,40
10,46
10,50
10,50
10,52
10,60
10,60
10,69
10,70
10,77
10,78
10,80
10,80
10,82
10,90
11,00
11,00
11,00
11,00
11,00
11,00
11,00
11,00
Cross
sect. d2
1,53
0,50
1,10
1,00
1,20
1,25
1,50
1,60
2,00
2,20
2,50
2,62
2,65
3,00
4,00
6,50
8,00
1,00
1,60
1,78
1,40
1,50
1,80
2,35
1,83
1,40
2,40
1,00
5,33
1,50
2,70
1,83
1,80
2,00
3,53
1,90
2,62
2,62
1,50
1,90
1,78
1,20
1,00
1,50
1,60
1,90
2,00
2,30
2,50
3,00
Parker
No.
6-1386
6-2071
6-1525
5-613
6-1337
6-1510
6-1376
6-1834
6-1492
6-1536
6-471
6-1922
6-347
6-677
6-928
6-1575
6-1498
6-1313
6-1454
6-945
6-1873
6-1323
6-1275
6-1468
6-1397
6-1635
6-1485
6-1978
6-1856
6-366
3-906
5-615
6-438
6-1746
6-1566
6-1466
6-1469
6-053
6-065
6-774
6-124
6-662
6-1330
2-310
6-1361
5-589
6-1595
6-2035
2-206
6-1717
Ød
mm
11,00
11,00
11,10
11,10
11,10
11,10
11,20
11,20
11,30
11,30
11,30
11,30
11,40
11,50
11,50
11,50
11,50
11,50
11,50
11,50
11,50
11,60
11,60
11,75
11,60
11,80
11,80
11,80
11,82
11,89
11,89
11,91
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,00
12,07
12,10
12,10
12,10
12,20
12,29
12,30
Cross
sect. d2
3,40
3,50
1,60
1,78
1,82
2,15
1,80
2,62
1,50
2,20
2,40
4,75
2,10
1,00
1,50
1,78
1,80
2,00
2,30
2,50
3,00
1,20
2,20
1,55
2,70
1,80
2,65
3,00
2,62
1,78
1,98
2,62
1,00
1,13
1,20
1,30
1,40
1,50
2,00
2,50
3,00
3,80
10,60
5,33
1,60
2,70
2,35
2,00
3,53
1,90
Parker
No.
6-058
6-2069
2-112
2-014
6-2058
6-550
6-1567
6-1379
6-198
6-1503
6-584
6-904
6-1526
6-033
6-1484
6-1636
6-075
6-016
6-1967
6-1822
6-730
6-207
6-163
5-616
6-129
6-1198
6-1825
6-1936
6-929
6-1827
6-1202
6-348
3-907
6-1571
6-096
6-1872
5-590
6-1504
6-473
2-311
6-1339
6-160
2-207
6-737
2-113
6-1288
6-1049
6-1576
6-143
6-1345
Ød
mm
12,30
12,30
12,37
12,42
12,47
12,50
12,50
12,50
12,50
12,83
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,10
13,11
13,23
13,30
13,30
13,30
13,30
13,30
13,30
13,40
13,46
13,50
13,50
13,50
13,59
13,59
13,60
13,64
13,70
13,75
13,87
13,89
13,94
14,00
14,00
14,00
14,00
14,00
Cross
sect. d2
2,40
3,50
2,62
1,78
1,78
1,10
1,50
1,80
2,00
1,27
1,00
1,30
1,30
1,50
1,58
1,80
2,00
2,50
1,20
2,62
3,00
3,50
1,60
2,62
1,78
1,20
1,80
2,20
2,40
2,80
3,00
2,10
2,08
1,50
2,75
3,00
2,69
2,69
2,50
5,33
2,50
2,80
3,53
1,30
2,62
1,00
1,10
1,30
1,50
1,60
71
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
2-015
6-1342
6-090
6-1555
6-1900
6-067
6-705
6-1621
6-2043
6-1603
6-1537
6-1923
6-1817
6-1809
6-135
6-1658
5-239
6-1813
6-1835
6-1766
6-397
6-1902
6-1828
6-1464
6-340
6-2070
6-1393
6-1857
6-683
6-118
6-040
6-085
6-005
6-106
6-043
6-072
6-1398
6-1099
6-128
6-1396
6-1548
6-1596
5-591
2-312
6-1747
6-940
6-206
5-243
6-349
2-208
Ød
mm
14,00
14,00
14,00
14,00
14,00
14,00
14,00
14,00
14,00
14,10
14,20
14,20
14,20
14,23
14,30
14,40
14,48
14,47
14,50
14,50
14,50
14,50
14,60
14,50
14,60
14,60
14,70
14,90
15,00
15,00
15,00
15,00
15,00
15,00
15,00
15,00
15,00
15,00
15,00
15,08
15,10
15,10
15,10
15,24
15,30
15,30
15,30
15,34
15,40
15,47
Cross
sect. d2
1,78
1,82
2,00
2,20
2,38
2,50
3,00
4,00
5,00
2,50
1,90
2,00
3,00
1,60
2,40
2,00
2,69
3,53
1,40
1,50
1,60
2,00
2,10
3,00
2,40
2,95
3,50
2,70
1,00
1,50
1,60
1,80
2,00
2,50
3,00
3,20
3,50
4,00
5,00
2,62
2,60
2,60
2,70
5,33
1,50
2,20
2,40
2,62
2,10
3,53
Parker
No.
5-676
6-1541
6-1884
6-1874
6-1340
6-1770
2-114
2-016
6-1494
6-223
5-617
6-439
6-632
6-1606
6-528
6-857
6-1748
6-146
6-562
6-891
6-042
6-2038
6-1021
6-1432
6-1604
6-1524
6-1039
3-908
6-876
6-1579
6-1493
6-313
5-643
6-725
6-297
6-006
2-313
6-1994
5-592
6-524
6-476
6-1765
6-044
6-1700
6-946
6-974
6-1365
2-209
6-2068
2-115
Ød
mm
15,49
15,50
15,50
15,50
15,50
15,50
15,54
15,60
15,70
15,80
15,88
16,00
16,00
16,00
16,00
16,00
16,00
16,00
16,00
16,00
16,00
16,00
16,00
16,00
16,10
16,30
16,30
16,36
16,50
16,50
16,50
16,50
16,51
16,56
16,58
16,70
16,81
16,82
16,90
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,04
17,10
17,12
Cross
sect. d2
1,47
1,50
1,78
1,90
2,60
4,00
2,62
1,78
2,50
2,40
2,62
1,00
1,25
1,30
1,50
1,80
1,90
2,00
2,50
2,65
3,00
3,50
4,00
6,00
3,00
1,40
2,40
2,21
1,00
1,50
2,00
2,70
1,14
1,78
1,50
1,45
5,33
5,33
2,70
1,10
1,50
1,93
2,00
2,50
3,00
3,50
4,00
3,53
1,60
2,62
Parker
No.
2-017
6-1682
6-1341
6-1109
6-1819
6-1731
6-1569
6-1961
5-690
6-554
6-388
6-1364
6-1610
6-1480
6-367
6-1298
6-041
5-256
6-258
6-731
6-087
6-076
6-1040
6-132
6-425
6-007
6-2044
6-125
6-755
6-1586
6-848
6-1597
6-396
6-1549
6-177
5-594
6-1685
6-1686
6-1689
6-1687
5-593
2-314
6-308
6-499
6-1688
6-1690
6-557
2-210
2-116
2-018
Ød
mm
17,17
17,20
17,20
17,20
17,20
17,22
17,30
17,30
17,30
17,40
17,40
17,50
17,64
17,70
17,81
17,86
17,90
17,96
17,96
18,00
18,00
18,00
18,00
18,00
18,00
18,00
18,00
18,00
18,00
18,00
18,14
18,20
18,20
18,20
18,30
18,30
18,40
18,40
18,40
18,40
18,40
18,42
18,50
18,60
18,60
18,60
18,60
18,64
18,72
18,77
Cross
sect. d2
1,78
1,50
1,82
3,00
4,00
1,00
2,20
2,20
2,40
2,10
2,50
4,00
2,00
1,78
1,02
2,62
1,25
2,62
2,62
1,30
1,50
2,00
2,20
2,50
3,00
3,15
3,50
4,00
5,00
10,00
1,78
2,68
3,00
2,60
2,40
3,60
2,29
2,40
2,40
2,53
2,70
5,33
1,50
2,00
2,29
2,53
3,50
3,53
2,62
1,78
72
O-Ring Guide
Parker Hannifin
Parker
No.
6-1543
6-1691
6-1692
6-1693
6-1901
6-295
6-1276
6-573
6-798
6-360
6-1574
6-039
6-779
6-998
6-1619
6-404
3-910
6-593
6-2059
6-1975
6-503
6-628
6-1430
6-350
6-119
6-1869
6-1463
6-1772
6-758
6-300
5-595
6-1832
2-315
6-099
6-078
6-793
6-619
6-017
6-1373
6-130
6-1623
6-808
6-958
6-1091
6-2011
6-1806
6-382
2-211
2-117
6-275
Ød
mm
18,80
18,80
18,80
18,80
18,80
19,00
19,00
19,00
19,00
19,00
19,00
19,00
19,00
19,00
19,00
19,00
19,18
19,20
19,24
19,30
19,30
19,30
19,35
19,40
19,50
19,50
19,50
19,50
19,75
19,80
19,80
19,84
19,99
20,00
20,00
20,00
20,00
20,00
20,00
20,00
20,00
20,00
20,00
20,00
20,00
20,20
20,20
20,22
20,29
20,30
Cross
sect. d2
1,90
2,29
2,40
2,53
2,70
0,80
1,00
1,50
1,80
2,00
2,42
2,50
2,65
3,00
4,00
5,00
2,46
3,00
1,78
2,20
2,40
3,65
1,00
2,10
1,50
2,66
3,50
4,00
2,50
2,40
3,60
0,79
5,33
1,30
1,50
1,80
2,00
2,50
2,65
3,00
3,15
3,55
4,00
5,00
9,00
1,81
3,00
3,53
2,62
2,40
Parker
No.
6-212
2-019
6-1465
6-1490
6-2055
6-1871
6-1638
6-1353
6-1470
6-008
6-1618
6-1311
6-089
6-1252
6-489
6-1722
6-1375
6-430
6-780
6-801
6-1818
6-1446
5-596
6-1590
6-687
6-1875
6-343
2-316
6-285
2-212
2-118
3-911
2-020
6-1115
6-493
6-088
6-139
6-1315
6-1885
6-036
6-1083
6-877
6-356
6-1064
6-1550
6-1598
6-2039
6-1086
6-1459
6-2060
Ød
mm
20,34
20,35
20,50
20,50
20,80
20,90
20,95
21,00
21,00
21,00
21,00
21,00
21,00
21,00
21,00
21,10
21,20
21,20
21,20
21,20
21,20
21,30
21,30
21,50
21,50
21,50
21,50
21,59
21,70
21,82
21,89
21,92
21,95
22,00
22,00
22,00
22,00
22,00
22,00
22,00
22,00
22,00
22,10
22,20
22,20
22,20
22,22
22,30
22,42
22,48
Cross
sect. d2
4,25
1,78
2,00
3,00
2,00
3,00
2,62
1,00
1,50
2,00
2,50
3,00
3,50
4,00
6,00
1,60
1,80
2,40
2,65
3,55
3,60
2,30
3,60
1,00
1,50
1,60
1,78
5,33
0,73
3,53
2,62
2,95
1,78
1,30
1,39
1,50
2,00
2,10
2,30
2,50
3,00
4,00
1,60
3,00
3,10
3,10
2,62
2,40
1,78
1,78
Parker
No.
6-1954
6-1719
6-263
6-287
6-1078
6-1710
6-999
6-066
6-1921
6-1911
6-1112
5-597
6-1431
6-1433
2-317
2-213
6-1930
6-1611
2-119
3-912
2-021
6-298
6-942
6-2061
6-351
6-1338
6-666
6-544
6-022
6-595
6-1027
6-453
6-443
6-050
6-288
6-1545
6-1955
6-1289
6-1676
6-1768
6-1456
5-598
6-1204
2-318
6-092
2-214
6-611
6-442
6-916
6-969
Ød
mm
22,50
22,60
22,70
22,89
23,00
23,00
23,00
23,00
23,00
23,00
23,00
23,00
23,00
23,00
23,16
23,39
23,40
23,47
23,47
23,47
23,52
23,60
23,60
23,65
23,70
23,80
24,00
24,00
24,00
24,00
24,00
24,00
24,00
24,20
24,32
24,50
24,50
24,50
24,50
24,50
24,60
24,60
24,69
24,77
24,80
24,99
25,00
25,00
25,00
25,00
Cross
sect. d2
2,50
1,78
1,50
1,00
1,50
1,60
2,00
2,50
2,60
2,62
3,00
3,60
4,00
6,00
5,33
3,53
4,00
2,40
2,62
2,95
1,78
1,02
2,90
1,78
2,80
2,40
1,00
1,50
2,00
2,50
3,00
4,00
6,00
3,00
1,00
1,00
2,50
3,15
4,00
5,50
3,40
3,60
1,78
5,33
1,50
3,53
1,50
2,00
2,50
3,00
73
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-426
6-376
3-913
2-120
2-022
6-126
6-745
6-189
6-957
6-289
6-387
5-618
6-728
6-1232
6-656
6-749
6-1082
6-2040
6-1259
5-599
2-319
6-1655
2-215
3-914
2-121
2-023
6-208
6-1613
6-400
6-049
6-894
6-1447
6-1919
6-147
6-825
6-660
6-913
6-023
6-1862
6-497
6-1540
6-296
5-600
2-320
6-905
6-101
6-794
6-140
6-180
6-654
Ød
mm
25,00
25,00
25,04
25,07
25,12
25,30
25,30
25,50
25,60
25,79
25,80
25,81
26,00
26,00
26,00
26,00
26,00
26,00
26,00
26,20
26,34
26,50
26,57
26,59
26,64
26,70
26,70
27,00
27,00
27,00
27,00
27,00
27,00
27,00
27,00
27,00
27,20
27,30
27,50
27,50
27,50
27,71
27,80
27,94
28,00
28,00
28,00
28,00
28,00
28,00
Cross
sect. d2
4,00
5,00
2,95
2,62
1,78
1,60
2,40
2,00
1,93
1,00
3,30
3,53
1,00
1,50
2,00
2,50
3,00
3,50
4,00
3,60
5,33
4,00
3,53
2,95
2,62
1,78
2,50
1,40
1,50
2,00
2,50
2,70
2,80
3,00
3,20
5,00
3,00
2,40
1,00
1,50
2,00
1,02
3,60
5,33
1,00
1,50
1,80
2,00
2,20
2,50
Parker
No.
6-781
6-977
6-1915
6-1533
6-1031
2-216
6-1378
2-122
2-024
6-1551
6-1599
6-1887
6-1729
6-1946
6-1738
6-1698
6-1423
6-1000
6-1517
5-601
6-034
2-321
6-352
3-916
2-217
2-123
2-025
6-1627
6-048
6-1203
6-1474
6-156
6-1987
6-056
6-037
6-1906
6-803
6-454
6-663
6-1366
6-1995
6-2062
6-290
6-142
5-602
6-1478
6-1401
6-324
6-1578
6-097
Ød
mm
28,00
28,00
28,00
28,00
28,00
28,17
28,20
28,24
28,30
28,30
28,30
28,57
28,68
28,77
28,90
29,00
29,00
29,00
29,10
29,30
29,50
29,51
29,70
29,74
29,74
29,82
29,87
30,00
30,00
30,00
30,00
30,00
30,00
30,00
30,00
30,00
30,00
30,00
30,00
30,00
30,00
30,10
30,30
30,70
30,80
31,00
31,00
31,00
31,00
31,00
Cross
sect. d2
2,65
3,00
3,50
4,00
5,00
3,53
1,00
2,62
1,78
3,10
3,10
1,52
2,40
2,40
2,87
2,00
2,50
3,00
1,60
3,60
1,50
5,33
2,80
2,95
3,53
2,62
1,78
1,00
2,00
2,15
2,25
2,50
2,62
3,00
3,15
3,50
3,55
4,00
4,65
5,00
5,33
1,78
2,40
2,00
3,60
1,50
2,00
2,50
4,00
4,50
Parker
No.
6-314
2-322
2-218
2-124
2-026
6-1146
6-1769
6-1461
6-766
6-760
6-2048
6-1512
6-1556
6-869
6-850
6-646
6-1920
6-838
6-1634
6-784
5-603
2-323
2-219
6-1820
2-125
6-1780
6-136
6-540
6-1138
6-1411
6-1614
2-027
6-472
6-802
5-157
6-1047
6-1890
6-1197
6-1631
6-622
6-914
6-1839
6-1617
5-604
2-324
6-1150
6-585
3-918
6-2047
2-220
Ød
mm
31,02
31,12
31,34
31,42
31,47
31,50
31,50
31,57
31,70
31,95
32,00
32,00
32,00
32,00
32,00
32,00
32,00
32,00
32,50
32,50
32,50
32,69
32,92
32,97
32,99
33,00
33,00
33,00
33,00
33,00
33,00
33,05
33,30
33,50
33,99
34,00
34,00
34,00
34,00
34,00
34,00
34,00
34,00
34,10
34,29
34,40
34,40
34,42
34,50
34,52
Cross
sect. d2
3,00
5,33
3,53
2,62
1,78
3,15
7,00
1,98
3,50
2,60
1,00
1,50
1,50
2,00
2,50
2,70
3,50
4,00
3,00
3,55
3,60
5,33
3,53
4,02
2,62
1,50
2,00
2,50
3,00
3,50
5,00
1,78
2,40
2,65
2,34
1,00
1,10
2,00
2,50
2,80
3,00
4,00
5,00
3,60
5,33
2,10
3,10
2,95
2,65
3,53
74
O-Ring Guide
Parker Hannifin
Parker
No.
2-126
2-028
6-752
6-1100
6-047
6-606
6-1116
6-993
6-1926
6-1166
6-545
6-1414
6-377
6-1124
6-1600
6-1650
5-605
6-1808
6-1805
6-980
6-678
6-981
6-694
6-609
6-329
6-1713
6-923
6-1140
6-1980
6-1652
2-221
2-127
6-1087
6-154
5-670
6-2007
6-2054
6-970
6-1188
6-291
6-881
6-1187
6-555
6-1669
5-606
6-459
3-920
2-325
6-1711
6-1257
Ød
mm
34,59
34,65
34,65
35,00
35,00
35,00
35,00
35,00
35,00
35,00
35,00
35,00
35,00
35,15
35,40
35,50
35,60
35,95
35,96
36,00
36,00
36,00
36,00
36,00
36,00
36,00
36,00
36,00
36,00
36,00
36,09
36,17
36,20
36,30
36,50
36,50
36,60
37,00
37,00
37,00
37,00
37,00
37,00
37,25
37,30
37,36
37,47
37,47
37,50
37,50
Cross
sect. d2
2,62
1,78
2,60
1,50
2,00
2,50
3,00
3,20
3,50
4,00
4,50
5,00
5,30
3,15
3,25
4,00
3,60
1,78
2,32
1,50
2,00
2,00
2,10
2,20
2,50
2,65
3,00
3,00
4,00
5,00
3,53
2,62
3,00
1,78
1,78
2,00
2,90
1,50
2,00
2,50
3,00
3,00
5,00
2,62
3,60
2,60
3,00
5,33
1,80
4,00
Parker
No.
2-222
2-128
2-029
6-2063
6-1589
6-1389
6-046
6-433
6-1712
6-1092
6-1025
6-2020
6-221
6-1412
6-782
6-353
6-575
6-1547
6-1038
6-1482
6-205
6-1362
2-129
6-1148
6-586
6-753
5-321
6-642
6-027
6-566
6-292
6-1912
6-1497
6-1023
6-1267
6-1114
6-102
2-326
6-972
2-223
2-130
6-1144
2-030
6-2049
6-541
6-449
6-525
6-337
6-875
6-414
Ød
mm
37,69
37,77
37,82
37,98
38,00
38,00
38,00
38,00
38,00
38,00
38,00
38,00
38,00
38,00
38,70
38,70
39,00
39,00
39,00
39,00
39,20
39,20
39,34
39,40
39,40
39,50
39,60
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,60
40,64
40,82
40,87
40,94
41,00
41,00
41,00
41,00
41,00
41,28
41,40
41,60
41,75
Cross
sect. d2
3,53
2,62
1,78
1,78
1,00
1,50
2,00
2,50
2,65
3,00
3,50
4,00
5,00
5,00
2,65
2,80
2,00
2,50
3,00
5,00
3,00
5,70
2,62
2,10
3,10
2,60
3,53
1,50
2,00
2,50
3,00
3,50
4,00
5,00
5,00
6,00
4,00
5,33
2,59
3,53
2,62
1,50
1,78
2,00
2,50
3,00
3,53
2,62
2,40
2,60
Parker
No.
6-1486
6-015
6-594
6-227
6-1319
6-1399
6-1224
6-1601
6-845
2-131
5-330
5-332
6-1189
6-996
6-1903
6-1060
6-2018
6-1413
6-759
6-809
6-1723
2-327
6-431
6-1054
2-224
2-132
2-031
6-542
6-1349
6-1520
6-193
6-772
6-975
6-1724
6-882
6-082
6-054
6-323
6-783
6-997
6-1907
6-1178
6-1195
6-726
6-1897
6-2008
5-035
2-133
6-750
6-1649
Ød
mm
42,00
42,00
42,00
42,00
42,00
42,00
42,00
42,40
42,50
42,52
42,52
42,85
43,00
43,00
43,00
43,00
43,00
43,00
43,25
43,70
43,70
43,82
44,00
44,00
44,04
44,12
44,17
44,20
44,30
44,35
44,35
44,70
44,83
44,96
45,00
45,00
45,00
45,00
45,00
45,00
45,00
45,00
45,00
45,00
45,00
45,30
45,36
45,69
45,90
46,00
Cross
sect. d2
1,00
1,50
2,50
3,00
4,00
4,50
5,00
4,25
1,80
2,62
5,33
3,53
2,00
3,00
3,50
4,00
5,00
5,50
2,60
1,80
3,55
5,33
2,00
3,00
3,53
2,62
1,78
2,50
5,70
2,58
3,00
3,50
2,67
2,57
1,00
1,50
2,00
2,50
2,65
3,00
3,50
4,00
4,50
5,00
6,00
1,93
3,53
2,62
1,50
1,50
75
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-1176
6-1020
6-944
6-1248
6-159
6-354
6-423
2-328
6-1141
6-1041
6-1535
6-1633
6-1059
6-1913
6-1483
6-293
2-225
2-134
2-032
6-009
6-1854
6-370
6-2052
6-155
6-1196
6-673
6-435
2-135
6-1253
6-912
5-701
6-1285
6-1070
6-194
6-1931
6-1981
6-051
6-055
6-964
6-1437
6-603
6-791
6-1226
2-329
6-1489
6-1684
2-226
2-136
2-033
6-630
Ød
mm
46,00
46,00
46,00
46,00
46,02
46,70
46,87
46,99
47,00
47,00
47,00
47,00
47,00
47,00
47,00
47,20
47,22
47,29
47,35
47,50
48,00
48,00
48,00
48,00
48,00
48,20
48,40
48,90
49,00
49,20
49,20
49,20
49,20
49,50
49,50
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,17
50,20
50,30
50,39
50,47
50,52
51,00
Cross
sect. d2
2,00
3,00
4,00
5,00
3,53
2,80
2,62
5,33
2,00
2,50
2,62
3,00
4,00
5,00
5,50
5,70
3,53
2,62
1,78
4,00
1,00
2,00
2,30
3,00
4,00
1,78
4,85
2,62
2,00
3,00
3,53
3,53
5,70
3,00
5,00
1,50
2,00
2,50
3,00
3,50
4,00
4,50
5,00
5,33
3,00
2,50
3,53
2,62
1,78
3,00
Parker
No.
6-1721
6-434
6-1984
5-037
6-1333
6-1587
6-1234
6-556
2-137
6-893
6-1991
6-1185
6-778
6-1347
6-1024
6-1914
6-113
6-112
3-928
2-330
6-1657
2-227
2-138
2-034
6-1317
6-1513
6-1184
6-1274
6-819
6-1643
6-879
6-664
6-1552
6-1602
6-810
6-1438
6-1695
6-141
6-1709
6-1065
6-1192
6-1186
6-1448
2-139
6-703
6-2010
6-568
6-985
6-785
6-1145
Ød
mm
51,10
51,50
51,63
51,71
51,94
52,00
52,00
52,00
52,07
52,20
52,39
52,50
53,00
53,00
53,00
53,00
53,00
53,00
53,09
53,34
53,50
53,57
53,64
53,70
53,80
54,00
54,00
54,00
54,00
54,00
54,00
54,00
54,40
54,40
54,50
54,70
55,00
55,00
55,00
55,00
55,00
55,00
55,00
55,25
55,30
55,30
56,00
56,00
56,00
56,00
Cross
sect. d2
1,60
1,50
1,78
3,53
3,53
1,00
2,50
3,00
2,62
5,70
3,53
1,80
1,80
2,00
3,50
4,00
5,00
6,50
3,00
5,33
2,00
3,53
2,62
1,78
4,00
1,50
2,00
2,00
3,00
3,15
4,00
4,65
4,25
4,25
2,65
3,53
1,20
2,00
2,50
3,00
3,50
4,00
5,00
2,62
2,00
5,70
2,00
3,00
3,55
4,00
Parker
No.
6-1703
2-331
6-1271
2-228
2-140
2-035
6-1741
6-643
6-719
6-427
6-1137
6-1626
6-447
6-1985
6-2050
6-1354
6-2001
6-2016
6-2019
6-1666
6-109
2-141
5-702
6-1585
3-932
6-1864
6-764
2-332
6-560
2-229
2-142
6-883
6-1970
6-1726
6-411
6-665
6-107
6-1368
6-114
2-036
6-851
6-1034
6-633
6-792
2-143
6-1439
6-1419
6-1894
6-455
6-699
Ød
mm
56,50
56,52
56,70
56,74
56,82
56,87
56,87
57,00
57,00
57,00
57,00
57,20
58,00
58,00
58,00
58,00
58,00
58,00
58,00
58,00
58,00
58,42
58,74
59,20
59,36
59,50
59,60
59,69
59,70
59,92
59,99
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,05
61,00
61,00
61,00
61,00
61,60
61,70
62,00
62,00
62,00
62,00
Cross
sect. d2
5,30
5,33
3,00
3,53
2,62
1,78
1,78
1,50
2,50
3,00
4,00
2,70
2,00
2,50
2,50
3,00
3,55
3,55
3,55
3,75
4,00
2,62
3,53
5,70
3,00
5,00
5,85
5,33
7,00
3,53
2,62
1,20
1,50
2,00
2,50
3,00
4,10
4,50
5,00
1,78
2,00
4,00
4,50
5,00
2,62
4,50
1,50
2,40
2,50
3,00
76
O-Ring Guide
Parker Hannifin
Parker
No.
6-1209
6-1104
6-1261
6-1117
2-333
6-242
6-2045
6-1162
6-151
6-474
6-1094
2-230
2-144
2-037
6-636
6-1661
6-1123
5-805
6-852
2-145
6-1588
6-1372
6-501
6-1620
6-1377
6-523
6-1053
6-596
6-1037
6-416
6-1927
5-703
6-1974
6-500
6-1193
6-1273
6-1940
2-334
2-231
2-146
2-038
6-243
6-316
6-1876
6-659
6-786
6-1607
6-1797
5-361
2-147
Ød
mm
62,00
62,00
62,00
62,00
62,87
63,00
63,00
63,00
63,00
63,00
63,00
63,09
63,17
63,22
64,00
64,00
64,20
64,39
64,39
64,77
65,00
65,00
65,00
65,00
65,00
65,00
65,00
65,00
65,00
65,00
65,00
65,09
66,00
66,00
66,00
66,00
66,00
66,04
66,27
66,34
66,40
67,00
67,00
67,00
67,00
67,00
67,00
67,39
67,84
67,95
Cross
sect. d2
3,53
4,00
4,00
6,00
5,33
2,50
3,00
3,50
4,00
4,50
6,00
3,53
2,62
1,78
3,00
4,00
5,70
1,78
1,78
2,62
1,00
1,80
2,00
2,50
2,65
3,00
4,00
4,50
5,00
5,30
5,50
3,53
1,50
2,00
3,00
5,00
5,33
5,33
3,53
2,62
1,78
1,50
2,50
2,80
3,00
3,55
4,00
2,26
3,53
2,62
Parker
No.
6-884
6-1380
6-1992
6-1272
6-941
6-1908
6-990
6-824
6-1966
6-1704
2-335
6-272
2-232
2-148
2-039
6-552
6-1462
6-031
6-1554
6-1778
6-1194
6-539
6-899
6-1917
6-1212
6-1740
6-787
6-1697
6-634
2-149
5-704
6-979
6-045
6-1013
6-1909
2-336
2-233
2-150
2-040
6-1628
6-030
6-757
6-1348
6-178
6-2012
6-483
6-294
6-587
6-1771
6-1609
Ød
mm
68,00
68,00
68,00
68,00
68,00
68,00
69,00
69,00
69,00
69,20
69,22
69,24
69,44
69,52
69,57
70,00
70,00
70,00
70,00
70,00
70,00
70,00
70,00
70,00
70,00
70,50
71,00
71,00
71,00
71,12
71,44
72,00
72,00
72,00
72,00
72,39
72,62
72,69
72,75
73,00
73,00
73,00
73,00
74,00
74,00
74,00
74,20
74,40
74,50
74,60
Cross
sect. d2
3,00
3,50
3,53
4,00
5,00
5,50
2,50
3,00
4,50
5,30
5,33
3,40
3,53
2,62
1,78
2,00
2,50
3,00
3,50
3,50
4,00
4,50
5,00
5,50
8,00
3,20
3,55
3,55
4,50
2,62
3,53
2,50
3,00
4,00
5,50
5,33
3,53
2,62
1,78
2,00
3,00
4,00
7,00
2,00
2,50
3,00
5,70
3,10
3,00
3,53
Parker
No.
5-705
6-1889
6-1357
6-1075
6-1001
6-1916
6-1928
2-337
6-1750
2-234
2-151
2-041
6-1369
6-754
6-921
6-464
6-805
6-1417
6-1069
6-1662
6-1467
6-1950
6-2033
6-1475
6-978
6-729
6-826
6-1002
2-338
2-235
6-820
6-1972
6-1152
6-992
6-1675
6-195
6-108
6-790
6-569
6-1270
6-1316
6-788
6-1057
6-1181
5-816
6-885
6-121
6-1077
2-339
6-2072
Ød
mm
74,61
74,90
75,00
75,00
75,00
75,00
75,00
75,57
75,65
75,79
75,87
75,92
76,00
76,00
76,00
76,00
77,00
77,00
77,10
77,50
77,50
77,80
78,00
78,00
78,00
78,00
78,00
78,00
78,74
78,97
79,00
79,00
79,20
79,30
79,50
79,50
79,60
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,31
80,50
81,00
81,00
81,92
81,97
Cross
sect. d2
3,53
1,78
2,50
3,00
4,00
4,50
5,50
5,33
2,70
3,53
2,62
1,78
2,00
2,50
3,00
4,50
2,00
2,50
2,62
2,00
2,62
1,50
1,50
2,00
2,50
3,00
3,50
5,00
5,33
3,53
1,50
2,00
5,70
2,62
2,65
3,00
3,20
1,80
2,00
3,00
3,50
3,55
4,00
5,00
1,78
4,00
3,00
4,00
5,33
3,53
77
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-513
6-1472
6-445
6-1941
2-236
6-1624
2-152
2-042
6-821
6-1870
6-900
6-1715
6-1804
6-184
6-676
6-456
6-1134
6-1012
6-588
6-822
6-733
6-1014
6-853
6-1445
6-1174
6-1406
2-340
6-452
2-237
6-991
6-1622
6-1776
6-1457
6-1573
6-574
6-579
6-558
6-1016
6-309
6-1779
6-276
6-1052
6-1629
6-2028
6-1165
6-1111
2-341
5-381
6-561
6-1705
Ød
mm
82,00
82,00
82,00
82,00
82,14
82,20
82,22
82,27
83,00
83,00
83,00
83,00
83,77
83,80
84,00
84,00
84,00
84,30
84,40
85,00
85,00
85,00
85,00
85,00
85,00
85,00
85,09
85,20
85,32
86,00
86,00
86,00
86,00
86,50
86,84
87,00
87,20
87,20
87,30
87,60
88,00
88,00
88,00
88,00
88,00
88,00
88,27
88,27
88,30
88,40
Cross
sect. d2
2,00
3,00
4,00
5,33
3,53
5,70
2,62
1,78
1,00
2,00
3,00
4,00
1,78
2,62
2,50
3,00
3,50
5,70
3,10
1,50
2,00
3,00
4,00
5,00
6,00
6,99
5,33
9,25
3,53
2,62
3,00
3,20
4,00
4,00
5,33
3,00
2,50
5,70
2,00
3,00
3,00
4,00
5,00
5,30
6,00
8,00
5,33
6,99
7,00
5,30
Parker
No.
2-238
6-1508
2-153
2-043
6-2030
6-867
6-013
6-763
6-1782
6-498
6-1113
6-216
6-1179
6-1265
6-1214
6-1904
6-1103
6-1777
6-1429
6-100
2-342
2-239
6-1891
6-1452
6-1061
6-1507
6-804
6-720
6-743
6-963
6-1056
6-257
6-1672
6-405
6-446
6-1095
6-1455
6-1029
6-1665
6-608
6-1850
6-339
6-399
2-343
2-240
2-154
2-044
6-1781
6-1673
6-863
Ød
mm
88,49
88,50
88,57
88,62
89,00
89,20
89,50
89,60
90,00
90,00
90,00
90,00
90,00
90,00
90,00
90,00
90,00
90,80
91,00
91,00
91,44
91,67
92,00
92,00
92,00
92,20
92,50
93,00
93,00
93,00
93,00
93,39
93,40
93,50
94,00
94,00
94,00
94,00
94,00
94,20
94,40
94,50
94,50
94,62
94,84
94,92
94,97
95,00
95,00
95,00
Cross
sect. d2
3,53
6,50
2,62
1,78
1,50
5,70
3,00
5,70
1,50
2,00
2,50
3,00
4,00
4,80
5,00
5,50
7,00
3,50
2,00
3,00
5,33
3,53
1,40
3,00
4,00
2,62
3,55
2,00
3,00
4,00
5,00
1,47
2,57
9,50
2,00
3,00
3,50
4,00
5,70
5,70
3,10
3,00
3,00
5,33
3,53
2,62
1,78
1,50
3,00
4,00
Parker
No.
6-1062
6-874
6-1910
6-582
6-700
6-832
6-640
6-1415
6-1306
6-1736
2-344
6-1708
6-157
2-241
6-1303
6-392
6-1089
6-2017
6-1973
6-601
6-174
6-1305
6-413
6-137
6-1905
6-1395
6-1237
2-345
6-025
2-242
2-155
2-045
6-724
6-1163
6-1006
6-1720
6-2027
6-1055
6-1200
2-346
6-1350
2-243
6-1175
6-589
6-2014
6-1381
6-806
6-995
6-1074
6-253
Ød
mm
95,00
95,00
95,00
95,50
96,00
96,00
97,00
97,00
97,00
97,50
97,79
98,00
98,00
98,02
99,00
99,00
99,20
99,39
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,97
101,00
101,19
101,27
101,32
102,00
102,00
102,00
102,40
103,00
103,00
104,00
104,14
104,30
104,37
104,50
105,00
105,00
105,00
105,00
105,00
105,00
106,80
Cross
sect. d2
4,50
5,00
5,50
3,53
2,00
9,00
1,50
4,00
5,00
3,55
5,33
2,50
3,00
3,53
3,00
6,99
5,70
3,30
1,00
2,00
2,50
3,00
4,00
5,00
5,50
6,00
8,00
5,33
3,00
3,53
2,62
1,78
3,00
4,00
6,00
5,70
3,00
5,00
5,30
5,33
5,70
3,53
3,00
2,00
2,62
3,00
3,50
4,00
5,00
2,66
78
O-Ring Guide
Parker Hannifin
Parker
No.
6-1320
6-762
2-347
2-244
2-156
2-046
6-1106
6-740
6-837
6-815
6-767
6-2036
6-1580
6-1367
6-903
6-1644
6-915
6-1671
2-348
2-245
6-1651
6-421
6-873
6-1182
6-1999
2-349
2-425
2-246
2-157
6-982
6-1164
2-047
6-1005
6-769
6-1826
6-1151
6-274
6-1159
6-1169
6-1660
6-1421
6-1322
6-1105
2-350
2-426
2-247
6-032
6-1509
6-580
6-123
Ød
mm
107,00
107,31
107,32
107,54
107,62
107,67
108,00
109,00
109,20
109,20
109,40
109,50
110,00
110,00
110,00
110,00
110,00
110,00
110,49
110,72
112,00
112,00
112,00
112,00
113,00
113,67
113,67
113,89
113,97
114,00
114,00
114,02
114,20
114,40
114,55
115,00
115,00
115,00
115,00
115,00
115,00
116,00
116,50
116,84
116,84
117,07
118,00
118,00
118,31
118,50
Cross
sect. d2
8,00
6,99
5,33
3,53
2,62
1,78
8,00
3,00
5,70
5,84
3,10
5,33
1,50
2,50
3,00
3,50
5,00
6,00
5,33
3,53
2,50
3,00
4,00
7,00
7,00
5,33
6,99
3,53
2,62
3,00
5,00
1,78
5,70
3,10
2,57
2,00
3,00
5,00
5,00
5,33
6,00
3,00
1,78
5,33
6,99
3,53
2,00
4,00
3,53
3,00
Parker
No.
5-843
6-448
6-1515
6-768
6-674
6-504
6-1076
6-1180
6-1003
6-1427
2-351
2-427
2-248
2-158
2-048
6-2064
6-961
6-1630
2-352
2-428
2-249
6-1143
6-1281
6-612
6-1990
6-1199
6-457
6-115
5-850
6-255
6-1572
6-1942
2-353
2-429
2-250
2-159
2-049
6-722
6-1473
6-1962
6-1073
6-1591
6-1096
6-451
2-354
2-430
2-251
6-693
6-1296
6-1084
Ød
mm
118,72
119,20
119,60
119,60
120,00
120,00
120,00
120,00
120,00
120,00
120,02
120,02
120,24
120,32
120,37
121,00
122,00
122,00
123,19
123,19
123,42
124,00
125,00
125,00
125,00
125,00
125,00
125,00
125,09
126,00
126,00
126,30
126,37
126,37
126,59
126,67
126,72
128,00
128,00
128,00
128,00
129,00
129,00
129,20
129,54
129,54
129,77
130,00
130,00
130,00
Cross
sect. d2
2,62
5,70
3,20
5,70
1,50
3,00
4,00
5,00
6,00
10,00
5,33
6,99
3,53
2,62
1,78
8,00
3,00
6,00
5,33
6,99
3,53
4,00
2,50
3,00
3,50
4,00
5,00
8,00
6,60
5,00
5,10
5,33
5,33
6,99
3,53
2,62
1,78
2,00
3,00
4,00
5,00
1,50
4,00
5,70
5,33
6,99
3,53
2,50
3,00
4,00
Parker
No.
6-902
6-2046
6-577
6-1436
6-1775
6-1217
6-095
6-1015
6-1988
2-355
2-431
2-252
6-1933
2-160
2-050
6-688
6-812
6-515
6-1329
6-1783
6-1277
6-059
6-060
6-844
6-1085
6-2000
2-356
2-432
6-1559
6-1154
2-253
6-1807
6-026
6-833
6-559
6-341
6-1949
6-379
6-224
2-357
2-433
2-254
2-161
6-698
6-511
6-378
6-1136
6-602
6-2024
6-1051
Ød
mm
130,00
130,00
130,00
131,00
131,10
131,50
132,00
132,00
132,70
132,72
132,72
132,94
133,00
133,02
133,07
133,35
133,50
134,00
134,00
135,00
135,00
135,00
135,00
135,00
135,00
135,50
135,89
135,89
136,00
136,00
136,12
136,53
137,00
137,00
137,00
137,30
137,50
138,00
138,00
139,07
139,07
139,29
139,37
140,00
140,00
140,00
140,00
140,00
142,00
142,00
Cross
sect. d2
5,00
5,80
6,00
5,30
3,20
4,00
3,00
4,00
2,62
5,33
6,99
3,53
3,00
2,62
1,78
5,33
12,00
3,00
8,00
1,50
3,00
3,23
3,43
4,00
5,00
6,00
5,33
6,99
3,00
4,00
3,53
1,78
3,00
4,00
14,00
8,00
3,30
2,10
6,00
5,33
6,99
3,53
2,62
2,00
3,00
4,00
5,00
10,00
3,00
4,00
79
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-1093
6-1207
2-358
2-434
2-255
6-1592
6-512
6-1632
6-1696
6-1233
6-1046
2-359
2-435
2-256
2-162
6-061
6-1680
6-2021
6-756
2-257
2-360
2-436
6-1774
6-623
6-932
6-2022
6-689
6-872
6-1295
6-222
6-1147
6-496
6-962
6-1803
6-318
2-361
2-437
2-258
6-1553
6-1107
2-163
6-1594
6-1773
6-1625
6-1294
6-1390
6-1318
6-1324
6-773
6-1605
Ød
mm
142,00
142,00
142,24
142,24
142,47
142,90
144,00
145,00
145,00
145,00
145,00
145,42
145,42
145,64
145,72
146,00
147,60
148,00
148,00
148,52
148,59
148,59
148,60
149,20
150,00
150,00
150,00
150,00
150,00
150,00
150,00
151,00
151,00
151,39
151,70
151,77
151,77
151,99
152,00
152,00
152,07
152,40
153,50
154,60
155,00
155,00
155,00
155,00
155,00
156,00
Cross
sect. d2
6,00
12,00
5,33
6,99
3,53
3,20
3,70
2,50
2,88
4,00
5,00
5,33
6,99
3,53
2,62
3,23
2,65
2,50
10,00
3,53
5,33
6,99
3,20
5,70
2,00
2,50
3,00
4,00
5,00
5,40
6,00
3,00
4,00
2,57
5,60
5,33
6,99
3,53
1,78
8,00
2,62
3,20
3,20
1,78
3,00
3,53
4,00
5,00
10,00
4,00
Parker
No.
2-362
2-438
2-259
2-164
6-170
6-1616
6-444
6-576
6-818
6-1081
6-1161
6-1702
6-1292
6-103
6-1045
6-494
6-1815
6-1612
6-983
6-814
6-1865
2-363
2-439
2-260
2-165
6-911
6-1402
6-1529
6-1593
6-1336
6-1929
6-746
6-1097
6-1290
2-364
2-440
6-282
2-261
2-166
6-1659
6-887
6-1177
6-1004
6-492
6-655
6-889
6-1356
6-1068
6-841
6-148
Ød
mm
158,12
158,12
158,34
158,42
159,00
159,00
159,20
160,00
160,00
160,00
160,00
160,00
160,00
161,00
162,00
162,50
163,07
164,00
164,20
164,20
164,33
164,47
164,47
164,69
164,77
165,00
165,00
165,00
165,10
167,50
168,40
169,20
170,00
170,00
170,82
170,82
171,00
171,04
171,12
171,45
172,00
172,00
172,00
174,00
174,20
174,30
175,00
175,00
175,00
177,00
Cross
sect. d2
5,33
6,99
3,53
2,62
4,00
6,00
5,70
3,00
4,00
5,00
5,00
5,30
6,00
3,00
2,50
3,53
1,63
2,00
5,70
5,84
2,62
5,33
6,99
3,53
2,62
2,00
4,00
5,00
3,20
3,50
6,00
5,70
4,00
5,00
5,33
6,99
11,00
3,53
2,62
3,20
3,00
4,00
6,00
3,00
5,70
3,50
5,00
6,00
10,00
2,00
Parker
No.
6-1976
2-365
2-441
2-262
2-167
6-631
6-1098
6-704
6-1088
6-1280
6-1706
6-1110
6-1119
6-862
6-1108
5-434
6-1816
2-366
2-442
2-263
2-168
6-1058
6-1428
6-1028
6-1121
6-122
6-1007
6-466
6-706
2-367
2-443
6-1848
6-495
6-1044
6-614
6-1646
2-264
2-169
6-299
6-1260
6-1391
6-1238
6-868
6-1283
6-1453
6-920
6-747
6-273
2-368
2-444
Ød
mm
177,00
177,17
177,17
177,39
177,47
179,00
179,20
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,52
180,54
183,00
183,52
183,52
183,74
183,82
185,00
185,00
185,00
185,00
186,44
187,10
188,00
189,20
189,87
189,87
190,00
190,00
190,00
190,00
190,00
190,09
190,17
191,00
192,00
192,00
194,00
195,00
195,00
195,00
195,50
196,00
196,00
196,22
196,22
Cross
sect. d2
3,00
5,33
6,99
3,53
2,62
3,00
5,70
3,00
4,00
5,00
5,30
6,00
8,00
10,00
5,33
6,99
1,78
5,33
6,99
3,53
2,62
3,00
4,00
5,00
6,00
6,99
8,40
4,00
5,70
5,33
6,99
1,78
3,00
4,00
5,00
10,00
3,53
2,62
1,78
4,00
8,00
14,00
3,50
5,00
6,00
12,00
4,00
12,00
5,33
6,99
80
O-Ring Guide
Parker Hannifin
Parker
No.
2-265
2-170
6-547
6-1932
6-1653
6-1450
6-1563
6-1307
6-1139
6-226
6-865
2-369
2-445
2-266
2-171
6-1996
6-342
6-1849
6-149
6-546
6-1565
6-1866
6-1153
6-1725
2-370
2-267
6-600
2-172
6-1118
6-152
5-445
6-2051
6-461
6-1997
6-954
6-1867
6-570
2-371
2-446
2-268
2-173
6-1302
6-1048
6-1050
6-254
6-183
6-502
6-1063
6-1425
6-1560
Ød
mm
196,44
196,52
197,00
197,00
198,00
198,00
198,00
200,00
200,00
200,00
201,00
202,57
202,57
202,79
202,87
204,00
204,00
205,00
205,00
205,00
205,00
206,00
206,00
208,00
208,92
209,14
209,20
209,22
210,00
210,00
210,24
212,00
213,68
214,00
214,63
215,00
215,00
215,27
215,27
215,49
215,57
216,00
218,00
218,00
218,00
219,00
220,00
220,00
220,00
221,00
Cross
sect. d2
3,53
2,62
3,00
6,00
3,00
4,00
8,00
4,00
5,00
6,00
4,00
5,33
6,99
3,53
2,62
5,33
8,00
1,78
2,00
3,00
5,00
5,70
7,00
4,00
5,33
3,53
5,70
2,62
4,00
5,00
6,99
5,30
7,14
5,33
2,18
5,00
6,00
5,33
6,99
3,53
2,62
4,00
5,80
6,00
12,00
5,30
3,00
5,00
7,00
1,78
Parker
No.
6-1989
2-372
2-269
2-174
6-1225
6-1679
6-949
6-1654
6-1945
6-1250
6-485
6-1896
6-150
2-373
2-447
6-1211
2-270
2-175
6-516
6-1727
6-1767
6-1948
6-1293
6-252
6-918
6-846
6-618
2-374
2-271
2-176
6-1451
6-1360
6-635
6-864
6-412
6-1426
6-1282
6-1239
6-1895
6-604
6-1346
6-1284
6-1564
6-436
6-1384
2-375
2-448
2-272
2-177
6-281
Ød
mm
221,60
221,62
221,84
221,92
222,00
223,00
223,00
224,00
224,00
225,00
225,00
226,20
227,00
227,97
227,97
228,00
228,19
228,27
230,00
230,00
230,00
230,00
230,00
231,50
234,10
234,20
234,32
234,34
234,54
234,62
235,00
236,00
236,00
238,00
238,00
238,00
238,00
238,00
239,20
240,00
240,00
240,00
240,00
240,00
240,66
240,67
240,67
240,89
240,97
241,00
Cross
sect. d2
2,62
5,33
3,53
2,62
7,00
2,65
5,33
6,00
7,00
3,00
5,00
3,53
2,00
5,33
6,99
3,00
3,53
2,62
3,00
4,50
4,80
5,00
8,00
6,00
8,40
7,00
1,78
5,33
3,53
2,62
4,00
6,00
7,00
4,00
5,00
6,00
10,00
14,00
3,53
3,00
5,00
8,00
8,00
12,00
7,40
5,33
6,99
3,53
2,62
7,00
Parker
No.
6-407
6-878
6-1861
6-1155
6-1534
6-671
6-967
6-1668
6-1263
2-376
2-273
2-178
6-1030
6-1167
6-1010
6-514
6-1993
6-1132
6-1582
6-1227
2-377
2-449
2-274
6-842
6-1522
6-1388
6-896
6-718
6-1860
6-1231
6-871
6-1201
6-1042
6-336
5-976
6-1403
6-1190
2-378
2-450
2-275
6-505
6-988
6-1868
6-1442
6-1441
6-936
6-175
6-1279
6-948
6-1476
Ød
mm
242,00
245,00
245,00
245,00
245,00
245,00
245,00
246,00
246,00
247,02
247,24
247,32
248,00
248,00
249,30
250,00
250,00
250,00
250,00
252,00
253,37
253,37
253,59
255,00
255,00
256,00
257,20
258,40
259,20
260,00
260,00
260,00
261,00
262,00
264,79
265,00
266,00
266,07
266,07
266,29
270,00
270,00
270,00
270,00
272,40
272,64
273,05
273,60
274,00
275,00
Cross
sect. d2
6,00
3,00
3,53
5,00
7,00
10,00
10,85
3,00
4,00
5,33
3,53
2,62
5,00
7,00
5,70
3,00
4,00
8,00
10,00
4,00
5,33
6,99
3,53
4,00
5,00
4,00
14,00
1,60
3,53
4,00
5,00
8,00
6,00
5,33
6,60
5,00
4,00
5,33
6,99
3,53
3,00
5,33
6,00
7,00
6,99
3,53
3,53
5,00
5,33
5,00
81
O-Ring Guide
Parker Hannifin
Sizing charts
Sizing charts – O-Ring-sizes acc. to cross section d
Parker
No.
6-2005
2-379
2-451
6-1667
2-276
6-638
6-840
6-234
6-1477
6-238
6-1240
6-1018
6-1191
6-241
2-380
2-452
2-277
6-1663
6-917
6-1424
6-2037
6-854
6-1278
6-1168
6-1370
6-1310
2-381
2-453
2-278
6-553
6-1359
6-935
6-1351
6-1371
6-1125
6-1880
6-607
6-1171
6-510
5-488
2-454
6-1210
6-1707
6-716
6-1458
6-153
6-1172
6-1755
6-1404
6-947
Ød
mm
276,00
278,77
278,77
278,99
278,99
281,00
282,37
283,00
285,00
285,00
285,00
289,42
290,00
291,00
291,47
291,47
291,69
294,00
296,00
297,00
297,80
298,00
299,50
300,00
300,00
300,00
304,17
304,17
304,39
304,80
304,80
307,57
309,30
310,00
311,00
313,00
315,00
315,00
315,00
316,56
316,87
320,00
320,00
320,00
320,00
320,50
320,62
323,00
325,00
325,00
Cross
sect. d2
2,62
5,33
6,99
2,62
3,53
5,00
3,53
12,00
5,00
12,00
14,10
5,87
5,00
6,00
5,33
6,99
3,53
3,00
6,00
4,00
6,99
2,62
5,00
6,00
8,00
10,00
5,33
6,99
3,53
1,78
3,18
3,53
5,70
5,00
10,00
5,33
4,00
5,00
6,00
2,62
6,99
3,00
3,53
6,00
6,50
5,33
3,53
5,33
5,00
5,33
Parker
No.
6-1546
6-1126
6-1784
2-382
2-455
2-279
6-1258
6-283
6-469
6-1408
6-1947
6-517
6-2013
6-1129
6-1235
6-1090
6-1043
6-1218
6-1881
6-1334
6-813
2-456
6-1255
6-1135
6-1918
6-1583
6-1639
6-1392
2-383
2-457
6-518
6-1888
2-280
6-895
6-1795
6-1142
6-1101
6-1836
6-1205
6-672
6-1786
6-203
2-458
6-1842
6-1254
6-807
6-1958
6-1756
6-598
6-682
Ød
mm
328,00
329,00
329,57
329,57
329,57
329,79
330,00
330,00
330,00
331,50
334,00
335,00
335,00
335,00
336,00
336,00
338,00
340,00
340,00
340,00
341,00
342,27
343,00
345,00
349,00
350,00
351,21
354,96
354,97
354,97
355,00
355,00
355,19
359,20
359,53
360,00
360,00
362,00
362,00
364,00
365,00
367,00
367,67
367,89
368,00
370,00
372,00
374,00
375,00
375,00
Cross
sect. d2
6,99
10,00
4,80
5,33
6,99
3,53
5,00
6,00
8,00
6,00
2,62
3,00
5,00
7,00
5,33
7,00
6,00
4,00
5,33
10,00
14,00
6,99
6,00
5,00
5,33
10,00
4,00
6,09
5,33
6,99
3,00
8,00
3,53
13,80
5,33
4,00
7,50
4,00
5,00
10,00
5,30
3,50
6,99
2,66
6,00
5,50
4,00
5,33
5,34
10,00
Parker
No.
6-723
6-897
6-927
2-384
2-459
2-281
6-204
6-1328
6-1241
6-711
6-1387
2-460
6-1374
6-209
6-892
6-458
6-934
2-282
2-385
2-461
6-938
6-1326
6-1335
6-1242
2-462
6-1352
6-165
6-164
6-173
6-215
6-1851
6-1796
5-525
6-1937
6-741
6-898
6-734
6-1584
2-283
2-386
2-463
6-331
6-939
6-158
6-1256
6-1435
2-464
6-578
6-909
6-835
Ød
mm
380,00
380,00
380,00
380,37
380,37
380,59
381,00
383,60
385,00
388,00
390,00
393,07
395,00
398,00
400,00
400,00
401,71
405,26
405,26
405,26
409,00
410,00
412,00
415,00
417,96
419,30
420,00
420,00
422,00
425,00
425,33
425,35
425,83
428,00
428,00
429,00
430,00
430,00
430,66
430,66
430,66
431,80
434,00
437,00
440,00
440,00
443,36
445,00
449,00
449,50
Cross
sect. d2
4,00
6,00
8,00
5,33
6,99
3,53
5,00
5,00
14,20
5,00
4,00
6,99
12,00
8,00
5,00
12,00
3,53
3,53
5,33
6,99
6,99
6,00
8,00
14,20
6,99
5,70
3,50
5,00
2,00
6,00
5,33
5,33
3,18
5,00
5,70
6,00
12,00
16,00
3,53
5,33
6,99
7,10
6,99
3,00
4,00
4,30
6,99
8,00
12,00
6,99
82
O-Ring Guide
Parker Hannifin
Parker
No.
6-1521
6-669
6-1757
6-1843
6-1674
6-530
2-284
2-387
2-465
6-1128
6-1753
6-1008
6-1072
6-799
2-466
6-1934
6-2015
6-827
6-930
6-1219
6-1243
6-256
2-388
2-467
6-1979
6-834
6-1080
6-1444
6-2073
2-468
6-1754
6-328
6-1221
6-1420
6-800
6-261
6-260
2-389
2-469
6-1829
6-2065
6-1758
6-202
6-394
6-1837
6-1170
6-775
6-919
6-2002
6-1158
Ød
mm
450,00
450,00
455,00
455,00
455,00
455,00
456,06
456,06
456,06
460,00
460,00
463,00
465,00
468,00
468,76
469,00
470,00
470,00
477,00
480,00
480,00
480,06
481,41
481,46
484,00
484,86
485,00
490,00
492,00
494,16
494,16
500,00
500,00
500,00
500,00
504,00
506,00
506,81
506,86
508,00
510,00
511,00
514,00
514,00
515,00
515,00
515,00
515,90
520,00
520,00
Cross
sect. d2
2,62
10,00
5,33
5,33
6,00
8,00
3,53
5,33
6,99
5,34
6,99
7,00
5,00
6,00
6,99
5,33
4,50
10,00
10,50
4,00
14,00
10,00
5,33
6,99
8,40
3,53
5,00
5,00
3,53
6,99
6,99
3,53
5,00
6,00
8,00
6,99
506,00
506,81
506,86
5,33
3,00
5,33
514,00
514,00
5,33
515,00
515,00
515,90
3,00
520,00
Parker
No.
6-1957
6-1823
6-529
6-951
6-467
6-2003
6-1787
6-1838
2-390
2-470
6-179
6-1409
6-621
6-1608
6-1299
6-836
6-1811
6-690
6-1641
6-2031
6-670
6-1830
6-2006
6-1952
2-391
2-471
6-462
6-1964
6-1229
6-709
6-1678
6-176
6-1300
6-626
6-1127
6-1812
2-392
2-472
6-1244
6-1963
6-1953
6-817
6-831
6-380
6-1759
6-1844
6-2023
6-1858
6-233
6-1301
Ød
mm
522,00
522,00
524,00
526,00
528,00
532,00
532,18
532,18
532,21
532,26
533,40
534,00
535,46
538,00
540,00
543,50
545,00
546,00
546,00
547,00
550,00
552,00
553,00
555,00
557,61
557,66
558,00
560,00
564,30
565,00
571,00
577,85
579,00
580,00
580,50
582,68
582,68
582,68
585,00
587,00
589,00
590,00
590,00
594,51
595,00
595,00
598,00
602,00
602,00
602,00
Cross
sect. d2
4,00
10,00
524,00
526,00
528,00
3,00
5,33
5,33
532,21
532,26
533,40
534,00
535,46
538,00
540,00
543,50
7,00
546,00
546,00
7,00
550,00
5,33
5,33
3,00
557,61
557,66
558,00
7,00
564,30
565,00
8,00
577,85
579,00
580,00
580,50
7,00
582,68
582,68
585,00
7,00
3,00
590,00
590,00
594,51
5,33
5,33
7,00
7,00
602,00
602,00
Parker
No.
6-422
6-320
2-473
2-393
6-1220
6-1017
6-742
6-1157
6-647
6-1841
6-265
6-1528
6-278
6-1794
6-1824
6-247
6-2025
6-1262
2-394
2-474
6-536
6-986
6-1716
6-235
6-644
6-1853
6-1831
6-1308
6-1859
6-1960
6-1959
6-381
6-1998
2-395
2-475
6-1418
6-653
6-645
6-2026
6-816
6-1443
6-301
6-535
6-236
6-1742
6-266
6-1160
6-701
6-321
5-092
Ød
mm
607,00
608,00
608,08
608,08
610,00
613,92
614,00
615,00
617,00
618,50
619,50
621,00
622,00
623,08
623,08
624,00
628,50
632,00
633,48
633,48
635,00
635,00
635,00
637,00
638,89
639,00
640,00
640,00
640,00
645,00
645,00
647,70
650,00
658,88
658,88
661,00
664,00
665,00
669,30
670,00
675,00
677,00
680,00
689,00
690,00
693,50
695,00
695,00
700,00
701,68
Cross
sect. d2
607,00
608,00
6,99
608,08
4,00
6,99
7,00
5,00
7,00
2,00
8,00
8,50
8,00
5,33
5,33
6,99
7,00
6,00
5,33
6,99
5,00
9,00
10,00
10,00
5,44
4,00
2,62
6,00
7,00
3,53
4,00
6,99
5,33
5,33
6,99
14,00
5,00
5,00
7,00
10,00
5,30
7,00
5,00
10,00
8,00
10,10
5,00
6,99
10,00
6,99
83
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
6-1790
6-702
6-668
6-531
6-1798
6-1821
6-521
6-372
6-389
6-267
6-1245
6-305
6-1847
6-1577
6-1309
6-228
6-1840
6-943
6-2067
6-1079
6-1071
6-417
6-303
6-1173
6-1951
6-1222
6-667
6-1944
6-1215
6-248
6-1956
6-237
6-649
6-415
6-2042
6-279
6-322
6-1943
6-509
6-2066
6-648
6-268
6-1131
6-229
6-190
6-1130
6-508
6-330
6-650
6-1246
Ød
mm
702,66
707,00
708,00
710,00
715,00
715,00
716,00
720,00
723,90
734,00
735,00
736,00
736,00
736,60
740,00
740,00
745,00
748,50
750,00
750,00
755,00
760,00
763,01
764,00
764,00
770,00
770,00
777,00
780,00
783,00
786,00
786,00
798,00
800,00
801,00
810,00
810,00
818,00
819,00
820,00
820,00
827,00
835,50
837,00
840,00
840,50
849,00
850,00
853,00
853,00
Cross
sect. d2
5,33
6,99
10,00
5,33
5,33
5,33
8,00
6,99
6,99
6,99
15,00
3,53
7,00
5,00
6,00
10,00
10,00
7,00
3,00
5,00
5,00
5,00
6,99
6,99
7,00
7,00
10,00
12,00
7,00
6,99
4,00
10,00
7,00
5,33
4,00
7,10
10,00
12,00
7,00
3,00
7,00
7,00
7,00
10,00
12,00
7,00
7,00
10,00
7,00
20,00
Parker
No.
6-2009
6-1223
6-707
6-363
6-890
6-1760
6-597
6-230
6-304
6-1156
6-1788
6-924
6-249
6-335
6-708
6-250
6-409
6-269
6-1799
6-1852
6-302
6-334
6-527
6-1761
6-232
6-460
6-534
6-1213
6-332
6-280
6-1882
6-239
6-333
6-270
6-393
6-385
6-240
6-271
6-245
6-1793
6-1968
6-1801
6-1792
6-1304
6-1325
6-1802
6-1066
6-1067
6-1791
6-1845
Ød
Cross
mm sect. d2
855,00
10,00
860,00
3,00
865,00
8,40
865,00
12,00
870,00
8,00
874,00
5,33
875,00
8,00
882,00
10,00
887,00
6,99
890,00
5,00
890,00
5,33
900,00
10,00
910,00
6,99
914,00
5,33
929,00
6,00
936,00
6,99
940,00
10,00
950,50
10,06
955,00
5,33
955,00
7,00
955,00
12,60
960,00
5,33
974,00
7,00
975,00
5,33
984,00
10,00
996,00
7,00
1004,00
8,00
1005,00
15,00
1011,00
5,33
1016,00
7,00
1029,00
8,30
1029,00
10,00
1042,00
5,33
1046,00
7,00
1060,00
10,00
1071,00
14,40
1075,00
10,00
1103,00
10,00
1154,00
10,00
1210,91
5,33
1590,00
6,99
1615,00
5,00
1678,90
5,33
1840,00
5,00
1865,00
5,00
1950,00
5,33
1960,00
10,85
2072,00
10,00
2250,00
5,33
2324,00
6,99
Parker
No.
6-1762
6-1846
6-1800
6-1763
6-984
6-1789
Ød
Cross
mm sect. d2
2330,00
10,00
2350,00
6,99
2390,00
6,00
2500,00
10,00
2965,00
7,00
3000,00
5,33
84
O-Ring Guide
Parker Hannifin
Parbak® Back-up ring
Parbak® Back-up ring
Parbak® Back-up rings prevent extrusion in high-pressure applications, help
to maintain the lubricant film and thus prolong the service life of O-Rings.
Developed primarily for service in petroleum based hydraulic fluids at -40°C
to 121°C, Parker‘s standard Parbak® N0300-90 and N1444-90 compounds
provide the maximum benefits in back-up ring service. Compounds for use in
other fluids and for temperatures up to 204°C are available on request. Parbaks will stretch up to 50%, and are quickly and easily installed. Advantages
of the contour design are obtained regardless of how Parbaks are installed
— they may be installed with the concave face in either direction, toward or
away from the O-Ring.
A
A
Detail A
W
R
A
T
A
R = 0,25 max.
Detail A
W
M
M
A
ø
R
M
ø
R = 0,25 max.
ax.
85
O-Ring Guide
Parker Hannifin
Sizing charts
T
Sizing charts – Parbak® back-up ring 8-xxx sizes
Parker
No.
8-004
8-005
8-006
8-007
8-008
8-009
8-010
8-011
8-012
8-013
8-014
8-015
8-016
8-017
8-018
8-019
8-020
8-021
8-022
8-023
8-024
8-025
8-026
8-027
8-028
8-029
8-030
8-031
8-032
8-033
8-034
8-035
8-036
8-037
8-038
8-039
8-040
8-041
8-042
8-043
8-044
8-045
8-046
8-047
8-048
8-049
8-050
8-102
M
W ±0.08
(mm) (mm)
2,44
1,35
3,23
1,35
3,56
1,35
4,34
1,35
5,13
1,35
5,94
1,35
6,73
1,35
8,31
1,35
9,91
1,35
11,56
1,35
13,16
1,35
14,73
1,35
16,33
1,35
17,91
1,35
19,51
1,35
21,08
1,35
22,68
1,35
24,26
1,35
25,86
1,35
27,43
1,35
29,03
1,35
30,61
1,35
32,21
1,35
33,78
1,35
35,38
1,35
38,56
1,35
41,73
1,35
44,91
1,35
48,08
1,35
51,26
1,35
54,43
1,35
57,61
1,35
60,78
1,35
63,96
1,35
67,13
1,35
70,31
1,35
73,48
1,35
76,66
1,35
83,01
1,35
89,36
1,35
95,71
1,35
102,06
1,35
108,41
1,35
114,76
1,35
121,11
1,35
127,46
1,35
133,81
1,35
1,96
2,18
Parker
No.
8-103
8-104
8-105
8-106
8-107
8-108
8-109
8-110
8-111
8-112
8-113
8-114
8-115
8-116
8-117
8-118
8-119
8-120
8-121
8-122
8-123
8-124
8-125
8-126
8-127
8-128
8-129
8-130
8-131
8-132
8-133
8-134
8-135
8-136
8-137
8-138
8-139
8-140
8-141
8-142
8-143
8-144
8-145
8-146
8-147
8-148
8-149
8-150
M
W ±0.08
(mm) (mm)
2,77
2,18
3,56
2,18
4,34
2,18
5,13
2,18
5,94
2,18
6,73
2,18
8,31
2,18
9,91
2,18
11,48
2,18
13,08
2,18
14,66
2,18
16,26
2,18
17,83
2,18
19,43
2,18
21,11
2,18
22,68
2,18
24,28
2,18
25,86
2,18
27,46
2,18
29,03
2,18
30,63
2,18
32,21
2,18
33,81
2,18
35,38
2,18
36,98
2,18
38,56
2,18
40,16
2,18
41,73
2,18
43,33
2,18
44,91
2,18
46,51
2,18
48,08
2,18
49,68
2,18
51,26
2,18
52,86
2,18
54,43
2,18
56,03
2,18
57,61
2,18
59,21
2,18
60,78
2,18
62,38
2,18
63,96
2,18
65,56
2,18
67,13
2,18
68,73
2,18
70,31
2,18
71,91
2,18
73,48
2,18
86
Parker
No.
8-151
8-152
8-153
8-154
8-155
8-156
8-157
8-158
8-159
8-160
8-161
8-162
8-163
8-164
8-165
8-166
8-167
8-168
8-169
8-170
8-171
8-172
8-173
8-174
8-175
8-176
8-177
8-178
M
W ±0.08
(mm) (mm)
76,66
2,18
83,01
2,18
89,36
2,18
95,71
2,18
102,06
2,18
108,41
2,18
114,76
2,18
121,11
2,18
127,46
2,18
133,81
2,18
140,16
2,18
146,51
2,18
152,86
2,18
159,21
2,18
165,56
2,18
171,91
2,18
178,26
2,18
184,61
2,18
190,96
2,18
197,31
2,18
203,66
2,18
210,01
2,18
216,36
2,18
222,71
2,18
229,06
2,18
235,41
2,18
241,76
2,18
248,11
2,18
O-Ring Guide
Parker Hannifin
Parker
No.
8-201
8-202
8-203
8-204
8-205
8-206
8-207
8-208
8-209
8-210
8-211
8-212
8-213
8-214
8-215
8-216
8-217
8-218
8-219
8-220
8-221
8-222
8-223
8-224
8-225
8-226
8-227
8-228
8-229
8-230
8-231
8-232
8-233
8-234
8-235
8-236
8-237
8-238
8-239
8-240
8-241
8-242
8-243
8-244
8-245
8-246
8-247
8-248
M
W ±0.01
(mm) (mm)
5,13
3,00
6,73
3,00
8,30
3,00
9,90
3,00
11,56
3,00
13,16
3,00
14,73
3,00
16,33
3,00
17,90
3,00
19,46
3,00
21,03
3,00
22,63
3,00
24,21
3,00
25,81
3,00
27,38
3,00
28,98
3,00
30,56
3,00
32,16
3,00
33,88
3,00
35,48
3,00
37,06
3,00
38,66
3,00
41,83
3,00
45,01
3,00
48,18
3,00
51,36
3,00
54,53
3,00
57,71
3,00
60,88
3,00
64,06
3,00
66,83
3,00
70,00
3,00
73,18
3,00
76,35
3,00
79,53
3,00
82,70
3,00
85,88
3,00
89,05
3,00
92,23
3,00
95,40
3,00
98,58
3,00
101,75
3,00
104,93
3,00
108,10
3,00
111,28
3,00
114,45
3,00
117,63
3,00
121,11
3,00
Parker
No.
8-249
8-250
8-251
8-252
8-253
8-254
8-255
8-256
8-257
8-258
8-259
8-260
8-261
8-262
8-263
8-264
8-265
8-266
8-267
8-268
8-269
8-270
8-271
8-272
8-273
8-274
8-275
8-276
8-277
8-278
8-279
8-280
8-281
8-282
8-283
8-284
M
W ±0.01
(mm) (mm)
124,28
3,00
127,46
3,00
130,63
3,00
133,81
3,00
136,98
3,00
140,16
3,00
143,33
3,00
146,51
3,00
149,68
3,00
152,86
3,00
159,21
3,00
165,56
3,00
171,91
3,00
178,26
3,00
184,61
3,00
190,96
3,00
197,31
3,00
203,66
3,00
210,01
3,00
216,36
3,00
222,71
3,00
229,06
3,00
235,41
3,00
241,76
3,00
248,11
3,00
254,46
3,00
267,16
3,00
279,86
3,00
292,56
3,00
305,26
3,00
330,66
3,00
356,05
3,00
381,46
3,00
406,12
3,00
431,52
3,00
456,92
3,00
87
Parker
No.
8-309
8-310
8-311
8-312
8-313
8-314
8-315
8-316
8-317
8-318
8-319
8-320
8-321
8-322
8-323
8-324
8-325
8-326
8-327
8-328
8-329
8-330
8-331
8-332
8-333
8-334
8-335
8-336
8-337
8-338
8-339
8-340
8-341
8-342
8-343
8-344
8-345
8-346
8-347
8-348
8-349
8-350
8-351
8-352
8-353
8-354
8-355
8-356
M
W ±0.13
(mm) (mm)
11,43
4,65
13,03
4,65
14,60
4,65
16,20
4,65
17,78
4,65
19,38
4,65
20,96
4,65
22,56
4,65
24,13
4,65
25,73
4,65
27,31
4,65
28,91
4,65
30,42
4,65
32,08
4,65
33,43
4,65
35,26
4,65
38,43
4,65
41,61
4,65
44,78
4,65
47,96
4,65
51,13
4,65
54,31
4,65
57,61
4,65
60,78
4,65
63,96
4,65
67,13
4,65
70,31
4,65
73,48
4,65
76,66
4,65
79,83
4,65
83,13
4,65
86,31
4,65
89,48
4,65
92,66
4,65
95,83
4,65
99,01
4,65
102,31
4,65
105,49
4,65
108,66
4,65
111,84
4,65
115,01
4,65
118,19
4,65
121,36
4,65
124,54
4,65
127,71
4,65
130,89
4,65
134,09
4,65
137,24
4,65
O-Ring Guide
Parker Hannifin
Sizing charts
Parker
No.
8-357
8-358
8-359
8-360
8-361
8-362
8-363
8-364
8-365
8-366
8-367
8-368
8-369
8-370
8-371
8-372
8-373
8-374
8-375
8-376
8-377
8-378
8-379
8-380
8-381
8-382
8-383
8-384
8-385
8-386
8-387
8-388
8-389
8-390
8-391
8-392
8-393
8-394
8-395
M
W ±0.13
(mm) (mm)
140,41
4,65
143,59
4,65
146,76
4,65
149,94
4,65
153,11
4,65
159,46
4,65
165,81
4,65
172,16
4,65
178,51
4,65
184,86
4,65
191,21
4,65
197,56
4,65
203,91
4,65
210,26
4,65
216,61
4,65
222,96
4,65
229,31
4,65
235,66
4,65
242,01
4,65
248,36
4,65
254,71
4,65
267,41
4,65
280,11
4,65
292,81
4,65
305,51
4,65
330,91
4,65
356,31
4,65
381,71
4,65
406,60
4,65
432,00
4,65
457,40
4,65
482,75
4,65
508,15
4,65
533,55
4,65
558,95
4,65
584,02
4,65
609,42
4,65
634,82
4,65
660,22
4,65
Parker
No.
8-425
8-426
8-427
8-428
8-429
8-430
8-431
8-432
8-433
8-434
8-435
8-436
8-437
8-438
8-439
8-440
8-441
8-442
8-443
8-444
8-445
8-446
8-447
8-448
8-449
8-450
8-451
8-452
8-453
8-454
8-455
8-456
8-457
8-458
8-459
8-460
8-461
8-462
8-463
8-464
8-465
8-466
8-467
8-468
8-469
8-470
8-471
8-472
M
W ±0.15
(mm) (mm)
115,60
5,99
118,77
5,99
121,95
5,99
125,20
5,99
128,30
5,99
131,47
5,99
134,65
5,99
137,82
5,99
141,00
5,99
144,17
5,99
147,35
5,99
150,52
5,99
153,70
5,99
159,36
5,99
165,71
5,99
172,06
5,99
178,41
5,99
184,76
5,99
191,11
5,99
197,46
5,99
203,81
5,99
216,51
5,99
229,21
5,99
241,91
5,99
254,61
5,99
267,31
5,99
280,01
5,99
292,71
5,99
305,41
5,99
318,11
5,99
330,81
5,99
343,51
5,99
356,21
5,99
368,91
5,99
381,61
5,99
394,31
5,99
406,50
5,99
419,20
5,99
431,90
5,99
444,60
5,99
457,30
5,99
470,00
5,99
482,70
5,99
495,40
5,99
508,10
5,99
533,50
5,99
558,90
5,99
584,30
5,99
88
Parker
No.
8-473
8-474
8-475
M
W ±0.15
(mm) (mm)
609,70
5,99
635,10
5,99
660,50
5,99
O-Ring Guide
Parker Hannifin
Sizing charts – Parbak® back-up ring other dimensions
Other dimensions
004-050
102-178
201-284
309-395
425-475
Size tolerances
Parker No.
004-009
009-012
012-019
020-029
030-041
042-050
102-107
108-110
111-117
118-128
129-151
152-164
165-178
201-204
204-211
212-227
228-235
236-259
260-277
278-284
309-315
316-325
326-338
339-362
363-380
381-395
425-438
439-452
453-475
R
(mm)
2,21
3,28
4,42
6,65
8,74
M±
0,15 mm
0,18 mm
0,23 mm
1,00 %
0,86 %
0,78 %
0,15 mm
0,18 mm
0,25 mm
1,10 %
0,95 %
0,78 %
0,74 %
0,18 mm
0,25 mm
1,10 %
0,90 %
0,78 %
0,74 %
0,67 %
0,25 mm
1,10 %
0,95 %
0,78 %
0,74 %
0,67 %
0,78 %
0,74 %
0,67 %
T
(mm)
1,24
1,35
1,27
1,93
2,97
A
(mm)
1,14
1,14
1,02
1,52
2,44
Size tolerances
Parker No. A ±
004-284
0,08 mm
309-325
0,10 mm
425-475
0,13 mm
Please note:
1. On ordering both size and compound should be stated e.g. 8-130, N300-90.
2. Parbak® size numbers correspond to O-Rings in the 2-xxx series, e.g. 8-211, N 300-90 is fitted
with the O-Ring 2-211, N 674-70.
89
O-Ring Guide
Parker Hannifin
Sizing charts
Parker No.
Notes
90
O-Ring Guide
Parker Hannifin
Notes
91
O-Ring Guide
Parker Hannifin
Notes
92
O-Ring Guide
Parker Hannifin
Notes
93
O-Ring Guide
Parker Hannifin
Notes
94
O-Ring Guide
Parker Hannifin
© 2012 Parker Hannifin Corporation · Subject to change
ODE 5712 DE · 07/2012
Parker Hannifin GmbH & Co. KG
Seal Group Europe
P.O. Box 1641
74306 Bietigheim-Bissingen ∙ Germany
Tel. +49 (0) 7142 351-0
Fax +49 (0) 7142 351-293
www.parker.com/oring-europe
e-mail: [email protected]

O-Ring Guide - Seal Engineering AS

Transcription

Similar documents

O - Ring Handbuch - Steffen Haupt

O-Ring Handbuch O-Ring Handbook

2001 Parker O-Ring Handbook

VCI Catalog - Spartan Controls

Special Skills - John Clifford Graphics Consulting

Hennepin County Government Reorganization (1966)

SAS SEALTRON Catalog - SAS Industries, Inc.

Marauder BP2563 (.25cal) PCP Rifle