FTTH Gateway Product Catalogue

Transcription

Better
Connected
Living
Intelligent Gateway and
Smart Home Solutions for
Fiber-to-the-Home Networks
About
Icotera
Icotera is a leading European developer and manufac-
Our products and solutions are currently supporting the
turer of standard-setting Fiber-to-the-Home (FTTH) CPE
efforts of leading network operators throughout Europe,
solutions. We pride ourselves on creating and delivering
providing high-speed Internet broadband and content
products with superior design, quality and performance,
services to hundreds of thousands of private homes via
and are dedicated to providing fiber network operators
the growing network of fiber-optic cables that are now
with tailor-made, flexible and cost-effective solutions
being deployed across the continent.
that fit their individual needs.
Our mission is to enable our customers to deliver high
We are a technological leader in our field, with more than
quality FTTH solutions and services to their subscribers,
ten years of experience in fiber solutions. Our company
providing them with additional revenue streams that
headquarters are located in Denmark, while all of our
contribute to their sustainable growth, both now and in
R&D, manufacturing and customer support is in oper-
the future.
ation throughout Europe. Our hardware and software
development is produced in-house, guaranteeing our
Our goal is to provide our customers’ subscribers with an
customers the quality they need. We have proven our
innovative, ’Better Connected Living’ experience. We do
ability to adapt quickly and effectively to future technol-
this by offering a growing ecosystem of applications and
ogies, working with customers to provide them with the
services, including Energy Management solutions, Alarm
services they require.
& Surveillance, Home Automation, Wi-Fi boosters and
much, much more.
Page 2
We aim to make our
customers successful
by delivering:
Quality
that lasts
Tailor-made
solutions
Innovation
platform
24/7
Support
State-of-the-art FTTH P2P and GPON solutions, crafted
with superior quality of design, components, software,
and manufacturing.
Solutions that exceed the required standards, with multiple
management systems integrated along with in-house R&D,
allowing us to meet our customers’ individual needs and
requirements.
New and innovative applications and products that
combined with high-speed Internet broadband, enhance
the experience of every FTTH end-user.
The highest level of in-house customer
support and after-market services in
the industry, enabling fast and reliable
handling of feature request and
day-to-day support.
Page 3
Customer Testimonials
“Icotera was chosen as our CPE partner as we believed they were best placed to fulfil all
of our technical requirements at the very best price. Their innovative system is easy to
install, looks great and has proven to have a very high level of quality. Their technical
support team is quick to respond to our requests, and issues are always fixed quickly. We
have been very happy with this partnership.”
Michael Lund, Operations Manager
Syd Energi A/S
“We were looking for a reliable CPE partner for a fiber broadband project in Jordan, which
also happened to be Orange’s first attempt to convert almost all services to IPv6. Icotera
appeared very professional and technically competent, and turned out to be the only
vendor who could deliver to our exact specifications. With Icotera’s proven success in
IPv6 and implementation flexibility, they became the natural choice for Orange.”
Nicola Fanous, Data Network Team Leader
Orange Jordan
“NTE considers Icotera to be a visionary fiber technology company, with many years of solid
experience in P2P fiber CPE solutions. Icotera worked with us closely before, during and after
the CPE selection phase, which made the overall experience a very positive one for both us
and our customers. Looking into the future, Icotera has also been open-minded and solutionoriented to our new feature requests, and we therefore have great confidence in their ability
to support our company in the future.”
Tom André Sandal, Technical Manager
NTE
Page 4
Design
that makes a
difference
Unique Industrial Design
The housing of Icotera gateways has been designed with both
Thanks to our belief in the best Danish practices in design and
aesthetics and functionality in mind. In addition to holding the
engineering, our units have even been awarded with the presti-
most powerful optical fiber residential gateways on the market,
gious Red Dot award in product design.
they also set a brand new standard for ease-of-installation and
maintenance. This innovative design minimizes the total cost
It is not all about design though - optical fiber networks
of ownership, delivering significant savings to our customers.
including the fiber infrastructure that sits within end-users
households, benefits from an extremely long life, on a par with
What’s more, our units have been created to seamlessly fit in
traditional telephony cabling. At Icotera we appreciate the lon-
with the interiors of both modern and traditional households,
gevity of this technology, which means that our fiber termina-
with a discreet and compact design that still leaves a lasting
tion units (FTUs) have also been engineered to support future
impression.
generations of optical fiber gateways.
Advanced
slide-on system
Multi-purpose Fiber
Termination Unit
The innovative slide-on system built into our optical fiber
To support the expected impressive longevity of fiber instal-
gateways has been designed to make it simple to change
lations, Icotera has designed an advanced, universal Fiber
gateways without interfering with the fiber installation.
Termination Unit (FTU).
This makes it easy for end-users to replace their gateways,
and thereby dramatically cuts the costs for network operators.
This FTU supports all types of fiber installation methodologies and facilitates the use of single or dual-fiber in both
This system is an integral part of Icotera FTUs and gateways,
cable and tube. The FTU provides sufficient space for winding
allowing for mechanical fixtures and the simple removal of
up and reversing the fibers in accordance with minimum
the gateway, as well as facilitating stable and reliable optical
bending radius requirements of standard fibers. There is also
interconnections.
plenty of room for a gas block, fixtures for splicing rods, and a
Wavelength Division Multiplex (WDM) filter.
The mechanical interface is universal in design, and will be
featured in future generations of gateways, making for easy
This innovative design allows for a high-quality standard of
upgrades, simple maintenance and reduced costs.
the fiber installation, while minimizing labor and reducing
the cost of installation and maintenance.
Page 5
P2P FTTH
Gateway
i6800-series
Residential Gateway
The Icotera i6800 residential gateway integrates
optical Ethernet-based gigabit data transmission with
Layer 2-4 functionality, VoIP, 802.11ac & bgn Wi-Fi,
CATV and USB 3.0.
• Best-in-class Wi-Fi
• Ease of use & installation
• Vendor independent
• Smart Home platform
• Award-winning industrial design
• Lowest Total Cost of Ownership
Powerful hardware platform
The Icotera i6800 Fiber-to-the-Home (FTTH) gateway demon-
this FTTH gateway offers a complete and customizable filter
strates its great strength by bringing together a wide feature set
solution with low-pass filters for individual RF channel plans.
and flawless performance. Its foundation is built on a powerful,
cutting-edge dual-core architecture. This, paired with an ASIC
Ease of control
for packet forwarding, ensures the platform is always ready to
A great variety of management protocols (e.g. SNMP v1/v2,
cope with additional tasks while processing VoIP, Gigabit rout-
syslog, SSH, Telnet and TR-069) is integrated and supported,
ing of IPv4 with NAT, IPv6 and stateful filtering, traffic switch-
which guarantees effortless control over the i6800. Paired with
ing/bridging and high speed Wi-Fi.
our fail-proof, zero-touch auto provisioning mechanism, they
provide easy and trouble-free daily operations. To guarantee
Next generation Wi-Fi solution
trouble-free firmware roll-outs in harsh network environments,
With Wi-Fi becoming the preferred communication technology
the i6800 also comes with dual-bank firmware.
inside the home, the need for fast and stable wireless connections is becoming ever more important. The i6800 delivers not
Integrated Smart Home platform
only backwards compatibility with any 802.11a/b/g/n Wi-Fi
The i6800 gateway supports the unique Icotera Smart Home
certified device, but also includes the very latest standard —
platform via state-of-the-art low-consuming wireless technol-
802.11ac. With the added 802.11ac solution, the i6800 is capable
ogy. The platform offers great solutions for end-users within
of delivering 867+300 Mbps and more than 650 Mbps of com-
Alarm & Surveillance, Energy Management and Home au-
bined throughput in real home and office environment.
tomation. The cloud-based platform connects to third party
device-hardware, which makes the possibilities for connecting
Innovative feature set
devices close to endless. For the network operator or service
The i6800 provides exceptional Layer 2 functionality that can
provider, the platform offers a unique opportunity for addition-
effortlessly handle 16 bridging instances, 16 Wi-Fi APs over 2
al revenue streams and higher customer loyalty. The Icotera
radios, multiple WAN interfaces, PPPoE and in-band secure
Smart Home platform is deeply integrated into the Icotera gate-
management. The CATV AGC receiver offers broadband cable-
way, which makes the daily use effortless and very valuable for
television services to the subscriber with seamless monitoring
the modern household.
and configuration of the power levels. As an optional feature,
Page 6
i6800 Residential Gateway
FEATURES
Wi-Fi INTERFACES
USB
•
•
•
•
•
•
•
•
•
802.11ac Wi-Fi
• 2T2R MIMO
• 5 GHz band w/QAM256 and 80 MHz
• Authentication methods - Open 802.1x - WEP64 - WEP128 - WPA-WPA2
• Up to 8 SSIDs
• MAC filtering
• Advanced channel selection
• Software Tx power control
• Extensive monitoring
• Neighbor scanning
• Beamforming
• LDPC + STBC
• Wireless Client Isolation
• 1x USB 3.0 host
• 1x USB 2.0 host
• Prepared for: Z-Wave, ZigBee, CAT-iq,
Storage, Printers
Best-in-class Wi-Fi solution
Vendor-independent
Award-winning industrial design
Integrated CATV solution
Low power consumption
Optional operator branding
Extensive IPv6 support
Customized firmware
Built-in Smart Home platform
NETWORK
COMMUNICATION
WAN INTERFACE
• Single-mode fiber (ITU-T G.652) SC/PC
connector
• 100BaseBX10/20 compliant
• Tx: 1310 nm, Rx: 1480–1600 nm
• Full-duplex transmission
• Operating distance: 20 km
• Transmit power: -7 – -2 dBm
• Receive sensitivity: -3 – -23 dBm
• Class 1 laser product
• Auto detection of 100Mbps or Gigabit
LAN INTERFACE
• 4 RJ45 connectors 10/100/1000 Base
T(X)
• Auto-negotiation for speed and duplex
• Auto MDI/MDX
• Jumbo packets
• 802.1x
• Integrated cable tester, detects:
- Short
- Open
- Impedance mismatch
- Cable length
LAYER 2
•
•
•
•
•
•
•
•
•
•
•
16 bridge instances
64 byte forwarding at line rate
Jumbo 9k packets
IGMP v1/v2/v3 snooping
802.1p marking
VLAN support
Wi-Fi support
Transparent IPv6 forwarding
DHCP relay with option 82
2k address entries
Rate-limit per switch port
VoIP
• 2 separate POTS lines SIP (RFC3261)
• 5 REN support
• DTMF signalling - SIP INFO - Inband Auto - RFC 2833
• Caller ID support (DTMF/FSK/DTMF
DK)
• CLIR
• Advanced dialplan
• B-Number manipulation
• Class 5 services - Forward all calls
- Forward on busy - Forward on no
answer - Call waiting
• Codecs: G.711A a-law - G.711U μ-law G.722 - G.729AB
• Codec negotiation
• Modem/Fax detection
• Auto gain control
• Adaptive jitter buffer 10-300ms
• Silence suppression
• G.165 Echo Cancellation
• LEC (Line Echo Cancellation) 2- 128ms
• VAD (Voice Activity Detection)
• CNG (Comfort Noise Generation)
• PLC (Packet Loss Concealment)
802.11bgn Wi-Fi
• 802.11B/G/N 2T2R MIMO
• 2.4 GHz band w/QAM64 and 40 MHz
• Authentication methods - Open 802.1x - WEP64 - WEP128 - WPA WPA2
• Up to 8 SSIDs
• MAC filtering
LAYER 3
• Virtual interfaces
• Multiple WAN interfaces in one router
• 64 byte forwarding at line rate with
routing/NAT
• IGMP v1/v2/v3 proxy with fast-leave
and monitoring
• Stateful Firewall
• IPv4 - SNAT, DNAT, DMZ - DNS proxy DHCP client and server
• IPv6 - Prefix delegation RFC3769 DHCP client
• PPPoE (termination)
• 2k HW connection tracking
• SW connection tracking
• RTSP stateful proxy
• Protocol helpers for: SIP, FTP, TFTP,
PPTP, L2TP and IPSec
• DNS based Parental-Control
• Guest Access
CATV (OPTIONAL)
OPTICAL PARAMETERS
•
•
•
•
•
•
Saturation power: +2dBm
Input level range: -10 to 0 dBm
Input wave length: 1270 - 1610 nm
Optical connector: SC/APC
ITU-T G.652 Single Mode fiber
Software monitoring of RX level in 0.1
dB steps
• Low-signal LED configurable
RF PARAMETERS
•
•
•
•
•
•
QoS
• 8 queues
• Layer 2 and 3 QoS features - Packet
classification marking - Queuing Scheduling - Rate-limiting
• Marking and Queuing w/ 802.1p, ToS,
DiffServ classification
Globally shared rate-limiting queues
•
•
•
•
•
•
RF connector: 75 Ohm “F”
Frequency: 45-870MHz
EIN @-10dBm: 4 pA/√Hz
EIN @ 0dBm: < 14 pA/√(Hz)
Tilt: 5 dB
RF output AGC @-8 to 0 dBm (3.5%
OMI): 80 dBuV
Max. RF output @ 0 dBm (3.5% OMI):
96 dBuV
CNR (CENELEC 42 channels): ≥ 51 dB
CSO (CENELEC 42 channels): ≥ 60 dBc
CTB (CENELEC 42 channels): ≥ 60 dBc
RF filters (optional): up to 2
Software adjustable RF output level
w/AGC
i6800 Residential Gateway
Configuration possibilities
MANAGEMENT &
MONITORING
• Shared or separate IP interface for
management
• L1-L3 filters for all local services
• SSHv2 with key authentication
• Telnet with authentication
• End-user oriented web interface
(configurable) - Wi-Fi - Guest network
- LAN network - Port forwarding, NAT
loopback, DMZ, DynDNS, Status and
monitoring
• TR-069 supporting - TR-104 (VoIP) TR-181 (Network)
• CLI with auto-completion
• SNMP v1/v2 (IF-MIB, ICOTERA private
MIB)
• Multicast analyzer
- Debugging of live Multicast streams
- Provides detailed information from
MPEG-TS and RTP layers
• Extensive debug possibilities
• Packet dumping
• All settings are stored locally in flash
• Zero-touch configuration with DHCP/
TFTP/HTTP/FTP or TR-069
• Automatic firmware and configuration
update (polling)
• Dual bank firmware w/ fail-safe
upgrading
• LED brightness configurable by operator and/or End-User
• Hardware watchdog
OPERATIONAL
SPECIFICATIONS
• DC12V input ±10%
• Power consumption maximum: 14.4 W
(excl. USB ports)
• Operating temperature: 0 – 45°C
• Storage temperature: -20 – 85°C
• Humidity: 5% – 95% (non-condensing)
PHYSICAL SPECIFICATIONS
CASING
• Weight: 670 g
• Size: 190 x 110 x 48 mm (W x H x D)
• Front LEDs configurable by operator
and/or end-user: Power/WAN status
(link/traffic/provisioning) - VoIP port
1 - VoIP port 2 - Wi-Fi - CATV (status/
signal power)
• LAN status LEDs (link/traffic, duplex)
per interface
FIBER TERMINATION UNIT
(OPTIONAL)
• Slide-on mechanism for easy installation
• FTU support for - Gas block unit
(sold separately) - WDM filter (sold
separately)
• Optional blind cover for FTU
Gateway Interface Configurations:
Model
Uplink
LAN
USB
POTS
CATV
Wi-Fi
Antennas
Bottom
i6801:
BX20
4x
2x
2x
1x
802.11b/g/n + 802.11ac
2x2 Int.
FTU
i6802:
BX20
4x
2x
2x
1x
802.11b/g/n + 802.11ac
2x2 Int.
Patch
i6805:
i6806:
BX20
BX20
4x
4x
2x
2x
2x
2x
802.11b/g/n + 802.11ac
802.11b/g/n + 802.11ac
2x2 Int.
2x2 Int.
FTU
Patch
NOTE: Please contact Sales for further details on information listed and feature requests.
Revision 2.0. Icotera A/S reserves the right to change specifications without further notice.
www.icotera.com
Page 7
P2P Layer 2
Switch
i6400-series
Residential Switch
The Icotera i6400 Layer 2 residential fiber switch, prepared for Open Access networks, integrates optical
Ethernet-based data transmission with Layer 2-4
functionality, CATV and USB.
• Local 24/7 support
Strong hardware base
The Icotera i6400 is a fully featured Layer 2 fiber switch with
problems in the upstream network. Ethernet link performance
an advanced feature set. i6400 is targeted towards open access
is continuously controlled by 802.3ah OAM instruments that
networks and, in general, operators with a layer 2 demarcation
allow prompt resolution of any arising problems. Link state
point. All switching is done in hardware, resulting in lightning
information is propagated on both WAN and LAN side and
fast wirespeed gigabit transfer rates and giving the instant-on
power consumption is managed with advanced management
feeling for the end-user.
capabilities.
State of the art features
Full control and management
The i6400 is a complete, feature-full package of Layer 2
i6400 can easily be managed by protocols such as EOAM, SNMP
functionalities. Gigabit rates and instant forwarding due to
v1/v2, SSH/Telnet and TR-069. Supported by our zero-touch auto
powerful switching capability, optical signal auto-detection
provisioning mechanism it allows for easy and trouble-free
and support of 100Base-BX-10/20 and 1000Base-BX standards
daily operations.
is a clear token of this high quality switch. The CATV AGC
receiver gives the subscriber cable television access with power
level configuration and monitoring. To top it off, this fiber switch
The i6400 layer 2 switch supports the unique Icotera Smart
offers (optionally) individual RF channel plans in a complete
Home platform via state-of-the-art low-consuming wireless
filter solution with high-block band attenuation.
technology. The platform offers great solutions for end-users
within Alarm & Surveillance, Energy Management and Home
Page 8
Extensive functionality
automation. The cloud-based platform connects to third party
The i6400 offers an advanced array of traffic control and
shaping features, such as: Ethernet and IP filtering up to layer
4, MAC address limiting, IP source guard and VLAN forwarding
provider, the platform offers an opportunity for additional rev-
and filtering. Agile reduction of traffic overhead is managed by
enue streams and higher customer loyalty. The Icotera Smart
jumbo frame forwarding leading to lower packet rates. Adaptive
Home platform is deeply integrated into the Icotera switch,
mechanisms control the quality of optical signal (both CATV
which makes the daily use effortless and very valuable for the
and DATA) and enable the user to swiftly zero in on any
modern household.
i6400 Residential Switch
FEATURES
LAYER 2
• Vendor-independent
• Integrated CATV solution (optional)
• Developed and manufactured in
Europe
• Optional operator branding
• Customized firmware
• Extensive IPv6 support
• Built-in Smart Home platform
NETWORK
COMMUNICATION
WAN INTERFACE
• Single mode fiber (ITU-T G.652) SC/PC
connector
• Tx: 1310 nm, Rx: 1480–1600 nm
• Jumbo packets
• DDM (optional), providing measurements of:
- TX Power
- RX Power
- Temperature
- Voltage
- Current TX Bias
• Link propagation
LAN INTERFACE
• 4x 10/100/1000Base-T(x) RJ45 connector
• Auto-negotiation for speed and
duplex
• Auto MDI/MDX
• Jumbo packets
• Cable tester, detects:
- Short
- Open
- Cable length
•
•
•
•
•
•
•
•
•
•
•
•
•
Jumbo packet forwarding
OSI Layer 2 filtering
4k VLAN
VLAN filtering
VLAN remapping
VLAN termination
MAC limiting (1–254 or disabled)
IGMP v1/v2 snooping
MLD v1/v2 snooping
QinQ
Port mirroring
Loop detection
Broadcast suppression
RF PARAMETERS
•
•
•
•
•
•
•
•
•
•
•
LAYER 3
• IP source guard
• ARP inspection
• OSI Layer 3 and 4 filtering by ACLs
QoS
• 4 queues per interface
• Ingress/Egress rate limiting per
- Port
- Queue
- Access list
• Rate limiting in 32 Kbps steps
• DSCP mapping/remapping
• ToS mapping/remapping
• 802.1p mapping/remapping
• Mechanisms
- Weighted Fair Queuing
- Strict SP
CATV (OPTIONAL)
OPTICAL PARAMETERS
•
•
•
•
•
•
Input wave length: 1310/1550 nm
dB steps
Tilt: 5 dB
OMI): 80 dBuV
96 dBuV
w/AGC
USB
• 2.0 USB ports
• Prepared for
- Z-Wave
- ZigBee
- CAT-iq
- Storage
MANAGEMENT &
MONITORING
• IPv4 management interface
• Separate VLAN (optional)
• Access filtering based on IP source
network
• Zero-touch provisioning
• 64-bit port counters
- Unicast
- Packet size (64, 128, 256, 512, 1024,
1518, 9k)
- Multicast
- Broadcast
- FCS error
- Align error
- Undersized
- Fragmented
- Too long
- Good byte
- Bad byte
- Overflow
- Filtered
- Collisions
• SNMP v1/v2
- IF-MIB2
- Icotera private MIB
- Community protected
- Traps
• 802.3ah OAM
- Link performance monitoring
- Fault detection
- Loopback testing
update (polling)
upgrading
OPERATIONAL
SPECIFICATIONS
• DC5V input (±10%)
(excl. USB ports)
PHYSICAL
SPECIFICATIONS
CASING
• Weight: 670 g
• Size: 190 x 110 x 48 mm (W x H x D)
• Front LEDs configurable by operator:
- Power/WAN status
(link/traffic/provisioning)
- CATV (status/signal power)
per interface
• LED auto off after timeout period
(OPTIONAL)
• Slide-on mechanism for easy
installation
• FTU support for
- Gas block unit (sold separately)
- WDM filter (sold separately)
i6400 Residential Switch
Model
Uplink
LAN
USB
CATV
i6401:
BX20
4x
2x
1x
Bottom
FTU
i6402:
BX20
4x
2x
1x
Patch
i6405:
BX20
4x
2x
FTU
i6406:
BX20
4x
2x
Patch
Revision 2.0 Icotera A/S reserves the right to change specifications without further notice.
www.icotera.com
Page 9
P2P Media
Converter
i6200-series
Residential Media Converter
The Icotera i6200 residential media converter integrates optical Ethernet-based data transmission with
Layer 2-4 functionality, CATV and USB.
• Local 24/7 support
• Smart Home Platform
Strong hardware base
A media converter must offer more than simple conversion of
significantly reducing the traffic overhead. The quality of the
light into electrical signals. The i6200 was designed with this
optical signal (both CATV and DATA) is controlled by means of
in mind and the result is a low-powered, feature-full and yet
flexible mechanisms, enabling quick problem determination in
affordable demarcation point for your optical FTTH network. All
the upstream network. The implemented 802.3ah OAM instru-
traffic is hardware processed, resulting in blazing wirespeed
ments allow monitoring the Ethernet link performance on a
gigabit transfer rates which gives the instant-on feeling for the
continuous basis and taking corrective actions if necessary.
end-user.
Ease of control
Innovative features
i6200 can be controlled by a number of management protocols
The i6200 offers all the must-have features of an advanced
(e.g. EOAM, SNMP v1/v2, SSH/Telnet and TR-069). Combined
media converter. Due to its support of 100Base-BX-10/20 and
with our fail-proof zero-touch auto provisioning mechanism it
1000Base-BX-10/20 standard and optical signal auto-detec-
allows for easy and trouble-free daily operations.
tion, the packets may be forwarded instantly at gigabit rates,
allowing for a smooth and effortless experience. The CATV AGC
receiver offers cable television services to the subscriber with
The i6200 supports the unique Icotera Smart Home platform
monitoring and configuration of the power levels. As an option,
via state-of-the-art low-consuming wireless technology. The
this media converter features a complete low pass filter (LPF)
platform offers great solutions for end-users within Alarm &
solution allowing for individual RF channel plans (optional).
Surveillance, Energy Management and Home automation. The
cloud-based platform connects to third party device-hardware,
Page 10
High efficiency and flexibility
which makes the possibilities for connecting devices close
On top of that, the i6200 provides a number of more advanced
to endless. For the network operator or service provider, the
features that enable full traffic control and shaping, such as
platform offers an opportunity for additional revenue streams
Ethernet and IP filtering up to layer 4, MAC address
and higher customer loyalty. The Icotera Smart-Home platform
limiting, IP source guard or VLAN forwarding and filtering.
is deeply integrated into the Icotera gateway, which makes the
Jumbo frame forwarding leads to lower packet rates, thus
daily use effortless and very valuable for the modern household.
i6200 Residential Media Converter
FEATURES
• Vendor-independent
• Integrated CATV solution (optional)
• Developed and manufactured in
Europe
• Optional operator branding
• Customized firmware
• Extensive IPv6 support
• Built-in Smart Home platform
NETWORK
COMMUNICATION
VLAN termination
MAC limiting (1–254 or disabled)
IGMP v1/v2 snooping
MLD v1/v2 snooping
QinQ
Port mirroring
Loop detection
Broadcast suppression
LAYER 3
• IP source guard
• ARP inspection
• OSI Layer 3 and 4 filtering by ACLs
QoS
WAN INTERFACE
• Single mode fiber (ITU-T G.652) SC/PC
connector
• Tx: 1310 nm, Rx: 1480–1600 nm
• Jumbo packets
• DDM (optional), providing measurements of:
- TX Power
- RX Power
- Temperature
- Voltage
- Current TX Bias
LAN INTERFACE
• 1x RJ45 connectors 10/100/1000 Base
T(X)
• Auto-negotiation for speed and
duplex
• Auto MDI/MDX
• Jumbo packets
• Cable tester, detects:
- Short
- Open
- Cable length
LAYER 2
•
•
•
•
•
•
•
•
•
•
•
•
•
• 4 queues per interface
• Ingress/Egress rate limiting per
- Port
- Queue
- Access list
• Rate limiting in 32 Kbps steps
• DSCP mapping/remapping
• ToS mapping/remapping
• 802.1p mapping/remapping
• Mechanisms
- Weighted Fair Queuing
- Strict SP
CATV (OPTIONAL)
OPTICAL PARAMETERS
•
•
•
•
•
•
Input wave length: 1310/1550 nm
dB steps
RF PARAMETERS
•
•
•
•
•
•
•
•
•
•
•
Jumbo packet forwarding
OSI Layer 2 filtering
4k VLAN
VLAN filtering
VLAN remapping
Tilt: 5 dB
OMI): 80 dBuV
96 dBuV
w/AGC
USB
• 2.0 USB ports
• Prepared for
- Z-Wave
- ZigBee
- CAT-iq
- Storage
MANAGEMENT &
MONITORING
• IPv4 management interface
• Separate VLAN (optional)
• Access filtering based on IP source
network
• Zero-touch provisioning
• 64-bit port counters
- Unicast
- Packet size (64, 128, 256, 512, 1024,
1518, 9k)
- Multicast
- Broadcast
- FCS error
- Align error
- Undersized
- Fragmented
- Too long
- Good byte
- Bad byte
- Overflow
- Filtered
- Collisions
• SNMP v1/v2
- IF-MIB2
- Icotera private MIB
- Community protected
- Traps
• 802.3ah OAM
- Link performance monitoring
- Fault detection
- Loopback testing
update (polling)
upgrading
OPERATIONAL
SPECIFICATIONS
• DC5V input (±10%)
• Power consumption maximum:
2.9 W (excl. USB ports)
PPHYSICAL
SPECIFICATIONS
CASING
• Weight: 670 g
• Size: 190 x 110 x 48 mm (W x H x D)
• Front LEDs configurable by operator:
- Power/WAN status
(link/traffic/provisioning)
per interface
(OPTIONAL)
installation
• FTU support for
- Gas block unit (sold separately)
- WDM filter (sold separately)
i6200 Residential Media Converter
Model
Uplink
LAN
i6201:
BX20
1x
USB
CATV
Bottom
i6202:
BX20
1x
2x
i6205:
BX20
1x
2x
FTU
i6206:
BX20
1x
2x
Patch
1x
FTU
1x
Patch
www.icotera.com
Page 11
GPON FTTH
ONT
i5800-series
Residential ONT
The Icotera i5800 residential ONT integrates optical
Ethernet-based gigabit data transmission with Layer
2-4 functionality, VoIP, 802.11ac & bgn Wi-Fi, CATV and
USB 3.0.
Powerful hardware platform
The Icotera i5800 fiber gateway demonstrates its great strength
this fiber gateway offers a complete and customizable filter
by bringing together a wide feature set and flawless perfor-
solution with low-pass filters for individual RF channel plans.
mance. Its foundation is built on a powerful, cutting-edge
dual-core architecture. This, paired with an ASIC for packet
Ease of control
forwarding, ensures the platform is always ready to cope with
A great variety of management protocols (e.g. OMCI v2,
additional tasks while processing VoIP, Gigabit routing of IPv4
SNMP v1/v2, syslog, SSH, Telnet and TR-069) is integrated and
with NAT, IPv6 and stateful filtering, traffic switching/bridging
supported, which guarantees effortless control over the i5800.
and high speed Wi-Fi.
Paired with our fail-proof, zero-touch auto provisioning mechanism, they provide easy and trouble-free daily operations. To
guarantee effortless firmware roll-outs, in harsh network envi-
ronments, the i5800 series also comes with dual-bank firmware.
inside the home, the need for fast and stable wireless connections becomes ever more important. The i5800 delivers not only
backwards compatibility with any 802.11a/b/g/n Wi-Fi certified
The i5800 GPON ONT supports the unique Icotera Smart
device, but also includes the very latest standard — 802.11ac.
With the added 802.11ac solution, the i5800 is capable of de-
livering 867+300 Mbps and more than 650 Mbps of combined
throughput in real home and office environment.
Smart Home platform is deeply integrated into the Icotera gate-
management. The CATV AGC receiver offers broadband cable-
way, which makes the daily use effortless and very valuable for
television services to the subscriber with seamless monitoring
the modern household.
and configuration of the power levels. As an optional feature,
Page 12
i5800 Residential ONT
FEATURES
Wi-Fi INTERFACES
USB
•
•
•
•
•
•
•
•
•
802.11ac Wi-Fi
• 2T2R MIMO
• Up to 8 SSIDs
• MAC filtering
• Automatic channel selection
• Beamforming
• LDPC + STBC
• 1x USB 2.0 host
• 1x USB 3.0 host
Vendor-independent
Integrated CATV solution
Customized firmware
NETWORK
COMMUNICATION
GPON INTERFACE
• Single mode fiber (ITU-T G.652)
SC/APC connector
• Data rate of 1.244Gbps/2.488Gbps
(US/DS)
• Wavelength : TX 1310nm, RX 1490nm
• G.984.1,2,3,4,5 compliant
• Prepared co-existence for NG-PON
• OMCIv2 G.988 compliant
• Forward Error Correction (FEC)
• Ethernet GEM support
• Multiple T-CONTs/GEM ports per
device
• AES encryption
• Dying Gasp
• Class B+ optics
- Output level from +3 to +6dBm
- Receiver sensitivity -30.5dBm
LAYER 3
• 4x RJ45 connectors 10/100/1000 Base
T(X)
• Auto MDI/MDX
• Jumbo packets
• 802.1x
- Short
- Open
- Cable length
LAYER 2
QoS
•
•
•
•
•
•
•
•
•
•
• 5 REN support
DK)
• CLIR
802.11bgn Wi-Fi
• 802.11B/G/N 2T2R MIMO
• Up to 8 SSIDs
• MAC filtering
• Automatic channel selection
routing/NAT
and monitoring
• IPv6 - Prefix delegation RFC3769 Auto configuration PPPoE (termination)
• Protocol helpers for: SIP, FTP, TFTP
LAN INTERFACE
VoIP
CATV (OPTIONAL)
OPTICAL PARAMETERS
•
•
•
•
•
•
Input wave length: 1550 nm
dB steps
RF PARAMETERS
•
•
•
•
•
• 8 queues
• Globally shared rate-limiting queues
16 bridge instances
Jumbo 9k packets
802.1p marking
VLAN support
Wi-Fi support
2k address entries
•
•
•
•
•
•
Tilt: 5 dB
OMI): 80 dBuV
96 dBuV
w/AGC
MANAGEMENT &
MONITORING
• Shared or separate IP interface (VLAN
or virtual) for management
(configurable) - Wi-Fi - PPPoE - LAN
network - Port forwarding, NAT
monitoring
MIB)
• Packet dumping
TFTP or TR-069
update (polling)
upgrading
OPERATIONAL
SPECIFICATIONS
(excl. USB ports)
CASING
• Weight: 750 g
• Size: 190 x 150 x 48 mm (W x H x D)
and/or end-user: - OLT link, Power/
WAN status (link/traffic/provisioning) - VoIP port 1 - VoIP port 2 - Wi-Fi
per interface
(OPTIONAL)
installation
• FTU support for - Gas block unit
(sold separately) - WDM filter (sold
separately)
i5800 Residential ONT
Model
Uplink
LAN
USB
POTS
CATV
Wi-Fi
Antennas
i5801:
GPON
4x
2x
2x
1x
802.11b/g/n + 802.11ac
2x2 Int.
Bottom
FTU
i5802:
GPON
4x
2x
2x
1x
802.11b/g/n + 802.11ac
2x2 Int.
Patch
i5805:
GPON
4x
2x
2x
802.11b/g/n + 802.11ac
2x2 Int.
FTU
i5806:
GPON
4x
2x
2x
802.11b/g/n + 802.11ac
2x2 Int.
Patch
www.icotera.com
Page 13
Ethernet
Router
i4600-series
Residential Router
The Icotera i4600 residential ethernet router
integrates Ethernet-based gigabit data transmission
with Layer 2-4 functionality, VoIP, 802.11ac & bgn Wi-Fi,
and USB 3.0.
Powerful hardware architecture
Ease of control
The Icotera i4600 ethernet router demonstrates its great
A great variety of management protocols (e.g. SNMP v1/v2,
strength by bringing together a wide feature set and flawless
syslog, SSH, Telnet and TR-069) is integrated and supported,
performance. Its foundation is built on a powerful, cutting-edge
which guarantees effortless control over the i4600. Paired with
dual-core architecture. This, paired with an ASIC for packet
our fail-proof, zero-touch auto provisioning mechanism, they
forwarding, ensures the platform is always ready to cope with
provide easy and trouble-free daily operations. To guarantee
additional tasks while processing VoIP, Gigabit routing of IPv4
trouble-free firmware roll-outs, in harsh network environments,
with NAT, IPv6 and stateful filtering, traffic switching/bridging
the i4600 also comes with dual-bank firmware.
and high speed Wi-Fi.
The i4600 ethernet router supports the unique Icotera Smart
inside the home, the need for fast and stable wireless connec-
tions is becoming ever more important. The i4600 delivers not
only backwards compatibility with any 802.11a/b/g/n Wi-Fi
certified device, but also includes the very latest standard —
802.11ac. With the added 802.11ac solution, the i4600 is capable
of delivering 867+300 Mbps and more than 650 Mbps of com-
bined throughput in real home and office environment.
Smart Home platform is deeply integrated into the Icotera
ethernet router, which makes the daily use effortless and very
valuable for the modern household.
management.
Page 14
i4600 Residential Router
FEATURES
Wi-Fi INTERFACES
•
•
•
•
•
•
•
•
802.11ac Wi-Fi
• 2T2R MIMO
• Up to 8 SSIDs
• MAC filtering
• Beamforming
• LDPC + STBC
Vendor-independent
Customized firmware
NETWORK
COMMUNICATION
WAN INTERFACE
• 1 RJ45 connector 10/100/1000 Base
T(X)
• Full-duplex transmission
• Auto MDI/MDX
LAN INTERFACE
• 4 RJ45 connectors 10/100/1000 Base
T(X)
• Auto MDI/MDX
• Jumbo packets
• 802.1x
- Short
- Open
- Cable length
LAYER 2
•
•
•
•
•
•
•
•
•
•
•
16 bridge instances
Jumbo 9k packets
802.1p marking
VLAN support
Wi-Fi support
2k address entries
Rate-limit per switch port
QoS
802.11bgn Wi-Fi
• 802.11B/G/N 2T2R MIMO
• Up to 8 SSIDs
• MAC filtering
LAYER 3
routing/NAT
and monitoring
• IPv6 - Prefix delegation RFC3769 DHCP client
• PPPoE (termination)
• Protocol helpers for: SIP, FTP, TFTP,
PPTP, L2TP and IPSec
• DNS based Parental-Control
• Guest Access
• 8 queues
• Globally shared rate-limiting queues
USB
• 1x USB 3.0 host
• 1x USB 2.0 host
• Prepared for: Z-Wave, ZigBee, CAT-iq,
Storage, Printers
VoIP
• 5 REN support
DK)
• CLIR
• Codec negotiation
MANAGEMENT &
MONITORING
• Shared or separate IP interface for
management
(configurable) - Wi-Fi - Guest network
- LAN network - Port forwarding, NAT
monitoring
MIB)
• Packet dumping
TFTP/HTTP/FTP or TR-069
update (polling)
upgrading
• LED brightness configurable by operator and/or End-User
• Hardware watchdog
OPERATIONAL
SPECIFICATIONS
(excl. USB ports)
CASING
• Weight: 670 g
• Size: 190 x 110 x 48 mm (W x H x D)
and/or end-user: Power/WAN status
(link/traffic/provisioning) - VoIP port
1 - VoIP port 2 - Wi-Fi
per interface
i4600 Residential Router
Model
Uplink
LAN
USB
POTS
Wi-Fi
Antennas
i4601:
RJ45
4x
2x
2x
802.11b/g/n + 802.11ac
2x2 Int.
www.icotera.com
Page 15
Intelligent Gateways
Icotera A/S
Kongevejen 400D
Phone: +45 7010 0033
2840 Holte
Mail: [email protected]
Denmark
Web: www.icotera.com
© Icotera 2016

FTTH Gateway Product Catalogue

Transcription

Similar documents

Super Bowl 50 Stats

Full Map

hear all entertainment the way it was intended.

Wi-Fi from the Inside Out.

Cloud4Wi introduction

visionnet TW207er-4

EMUKEY Product Sheet

Who is Arvig?

Click to edit Master title style Welcome!

What does it measure? The Visioscan® VC 98 USB is a special UVA