® LED

Interzoo 2012
Dand compact
E
L
E
Z
N
rsatile
e
v
U
,
t
Troof, efficien
®
p
Water
The way we design and equip our aquariums today is constantly changing. The new Tunze®
LED is our response to this ongoing trend. It is an impressive example of how pump and lighting
technology can be transformed into a form of art. The purpose of our technology is to create
better lighting and energy conditions and at the same time give every aquarium the opportunity
to take full advantage of state-of-the-art technology.
The new Tunze® LED is the engineered combination of impressive luminance and a compact design, which has been innovatively
teamed up with a flexible attachment option in the form of a magnet holder. It performs its duties with a safety extra-low voltage
of only 11V and it is completely waterproof. The utilized Elite-LEDs guarantee very low luminance losses and a long service life.
The well-thought-out attachments can be adjusted to your individual lighting desires for every aquarium and therefore open up
completely new and highly aesthetic installation options.
In combination with the new TUNZE Multicontroller 7097, up to four separate TUNZE® LED can be controlled in terms of color and
luminescence in order to simulate very natural daylight cycles.
English / €
Filter 3162
The advantages of the Tunze® LED:
Fully corrosion-resistant plastic construction, completely passively cooled without noisy or failure-prone fans.
Fully waterproof (IP 68) sealed with resin, and mountable close to the water surface in order to reduce the luminance loss.
Compact design which can be positioned at any point.
Highly flexible mounting with a magnet holder.
High degree of safety through 11V DC operation, cable length: 2.5 m (98.42 in.).
Low operating costs and a high efficiency through 62 energy-efficient Elite-LEDs, white LEDs with up to 130 lm/W.
Long service life due to a low operating temperature and perfect heat distribution.
Optimal light distribution, ideally suited as the main lighting source for a nano-aquarium or supplement lighting for larger aquariums.
Light color and intensity are controllable time-dependent with the new Tunze® Multicontroller 7097 (not included).
No problems in case of power failure: The optional safety connector permits a normal operation with the TUNZE® power supply unit, but in
case of a power failure it will automatically switch over to a battery or a DC source.
Thanks to its small housing dimensions, combinations of multiple lamps are easily possible. The light output is multiplied, if the lights are
mounted in close proximity.
Lamp without bracket: L 305mm x B 25mm x H 17mm (L 12.00 in. x W 0.98 in. x H 0.66 in.), vertical mounting with holder L 320mm x B 50mm
x H 50mm (L 12.59 in. x W 1.96 in. x H 1.96 in.), parallel mounting with holder L 46mm x B 305mm x H 50mm (L 1.81 in. x W 12.00 in. x
H 1.96 in.).
P.A.R. (Photosynthetically Active Radiation) distribution
of TUNZE® LED 8810 at various water depths
(determined with the measuring device Apogee MQ200 in motionless clear water).
Adaptability to aquariums
Spectral distribution white
TUNZE® LED 8820
Spectral distribution blue
TUNZE® LED 8830
320 mm
TUNZE LED marine
2
Suitable for stony coral aquariums
up to 60 liters (15.85 US gallons) and
soft coral aquariums up to approx
100 liters (26.42 US gallons).
Equipped with 42 white LEDs (6500K),
20 blue LEDs (470nm) with 900
lumens. This combination yields a color
temperature of approx. 15,000K.
14 W overall power consumption,
including magnet holder for a glass
thickness of up to 12 mm (0.47 in.).
8810.000
139.94 
€
TUNZE LED white
Suitable for stony coral aquariums
up to 60 liters (15.85 US gallons)
and fresh water aquariums up to
approx. 120 liters (31.7 US gallons).
Equipped with 62 white LEDs
(6500K), 1250 lumens, 14 W overall
power consumption, including
magnet holder for a glass thickness
of up to 12 mm (0.47 in.).
8820.000
149.66 
€
TUNZE LED blue
Suitable for use as an extra lighting
for aquariums up to approx.
300 liters (79.25 US gallons).
Equipped with 62 blue LEDs
(470nm), 13 W overall power
consumption, including magnet
holder for a glass thickness
of up to 15 mm (0.59 in.).
8830.000
131.09 
€
DOC Skimmer 9004
The Comline® DOC Skimmer 9004 is designed for use in seawater mixed aquariums / soft coral aquariums up to 250 litres (66 USgal.) or
sensitive reef biotopes with stone corals up to 150 litres (40 USgal.). It works based on the TUNZE® Flash Skimming principle, water supply
is provided via an efficient surface intake system with bacteria film removal. Thus, the system can also be used as a “standalone solution”
in the aquarium. The featured TUNZE® Foamer generates many fine air bubbles with a diameter between 0.1 and 0.3mm, which ensures
particularly silent operation.
The Comline® DOC Skimmer is ready for installation, including Magnet Holder up to a pane thickness of 12mm (.47 in.), for thicker panes,
a second Magnet Holder can be used.
Air flow regulation and
silencer for an exceptionally
quiet operation.
Skimmer cup, 0.2l (.05 USgal.)
volume, also accommodates the
foam reactor, easy to remove.
Attachment with a patented
magnet holder for a glass
thickness of up to 12 mm (.47 in.).
Surface intake with
bacteria film removal.
Intermediate chamber
with patented antioverfoaming system.
New “Comline® Design”:
comfortable use, elegant and
unobtrusive in the aquarium.
Bubble-free outgoing water.
TUNZE® Foamer 9004.040,
high air output and low
energy consumption.
The “Flash skimming” principle enables highly efficient foam production.
Principle: Protein-rich surface water is mixed with water thoroughly in the TUNZE® Foamer. On the surface of the air bubbles
forming, pollutants such as protein, cellulose, dead cells, etc. are adsorbed immediately, the air bubbles are very fine, with
a diameter between 0.1 and 0.3mm. The water/air mixture is expanded and stabilized in the skimmer cup, the water returns
to the aquarium, and the protein-loaded air bubbles reach the skimmer cup reactor. The patented anti-overfoaming system
intermediate chamber with phase water prevents the skimmer from overfoaming and controls the skimmer performance,
depending on the water level and organic load.
The particularly high efficiency of the “flash skimming” principle compared to large skimmers with long contact time is
obtained because the substances adsorbed by the air bubbles are not released again, thus they don‘t return to the aquarium
water again.
DOC Skimmer 9004
Accessories (order separately)
Recommended, depending on tank load, from
60 to 250 litres (15 to 65 USgal.) of sea water.
Immersion depth: approx. 225mm to 245mm
(8.86 to 9.65 in.), skimmer cup volume:
0.2L (.52 in.), air output: approx. 150l/h
(40 USgal./h), 4W, 230V/50Hz (115V/60Hz),
dimensions: L 110 x W 90 x H 305mm (L 4.3
x W 3.5 x H 12 in.), fixed by means of Magnet
Holder up to a pane thickness of 12mm
(0.47 in.).
9004.000
107.45 
€
Filter fleece
for pre-filtering for Comline®
Filter 3162 and Comline®
Streamfilter 3163.
3162.200
4.00 
€
3
Filter 3162
The Comline® Filter 3162 is an internal fresh and sea water filter from 60 to 400 litres (15 to 105 USgal.), depending on tank load, with bottom
and surface intake, variable output of 250 - 850l/h (70 - 225 USgal./h), patented Magnet Holder up to a pane thickness of 12mm (.47 in.). It
can be upgraded with controlled heaters up to 75W, TUNZE® Osmolator and other Magnet Holders.
The Comline® Filter 3162 is ready for installation, including filtering media and filter bags for activated carbon or other filtering media.
Can be retrofit with controlled heaters up
to 75W directly on the case, better heater
efficiency, no risk of burns for animals.
Can be retrofit with Osmolator®
3155 for water level control
directly on the case.
Surface intake with
bacteria film removal.
Attachment with a patented
magnet holder for a glass
thickness of up to 12 mm (.47 in.).
New “Comline® Design”:
comfortable use, elegant and
unobtrusive in the aquarium.
Large filtering volume of 780cm³,
can be refilled with any type of
loose Micro and Macro wadding
or other filtering media.
Controllable bottom
intake for heavy
particles and sediments.
Controllable Comline® energy
saving pump with variable
output of 250 - 850l/h, energy
consumption 2.5 – 4.5W.
Comline® Filter 3162
Accessories (order separately)
Micro Wadding, 60 g (2.1 oz.)
for fresh and sea water from 60 to 400 litres
0872.010
2.78 
€
(15 to 105 USgal.), depending on tank load,
Macro Wadding, 250 g (8.8 oz.)
variable pump output of 250 to 850l/h (70 to
0873.010
4.54 
€
225 USgal./h), 2.5 – 4.5W, 230V/50Hz (115V/
NanoChem
300
ml
(10
oz.)
60Hz), dimensions: L 110 x W 90 x H 255mm
0950.000
13.11 
€
(L 4.3 x W 3.5 x H 10 in.), max. immersion
Filter carbon
depth approx. 230mm (9.1 in.), fixed by means
0870.901
4.92 
€
of Magnet Holder up to a pane thickness of
12mm (0.47 in.).
Quickphos 750 ml (25 oz.)
3162.000
55.52 
€
0910.000
16.56 
€
Silphos 750 ml (25.4 oz.)
0920.000
27.23 
€
0930.000
11.33 
€
3162.200
4.00 
€
Zeolite 750 ml (25 oz.)
4
Filter fleece
Streamfilter 3163
The Comline® Streamfilter 3163 is an internal fresh and sea water filter with propeller pump for filtering and current production, from 60 to
400 litres (15 - 105 USgal.), depending on tank load, with bottom and surface intake, 1,800 l/h (475 USgal./h) Turbelle® nanostream® and
patented Magnet Holder up to a pane thickness of 12mm (.47 in.). It can be upgraded with controlled heaters up to 75W, TUNZE® Osmolator
and other Magnet Holders.
The Comline® Streamfilter 3163 is ready for installation, including filtering media and filter bags for activated carbon or other filtering media.
Can be retrofit with controlled heaters up
to 75W directly on the case, better heater
efficiency, no risk of burns for animals.
Can be retrofit with
Osmolator® 3155 for
water level control
directly on the case.
Surface intake with
bacteria film removal.
Attachment with a
patented magnet holder
for a glass thickness of
up to 12 mm (.47 in.).
Large filtering volume of
780cm³, can be refilled
with any type of loose
Micro and Macro wadding
or other filtering media.
New “Comline® Design”:
comfortable use, elegant and
unobtrusive in the aquarium.
Controllable bottom intake for
heavy particles and sediments.
Propeller pump nanostream®
3163.200, energy
consumption 3.5W
Comline® Streamfilter 3163
Accessories (order separately)
Micro Wadding, 60 g (2.1 oz.)
for fresh and sea water from 60 to 400 litres (15
0872.010
2.78 
€
to 105 USgal.), depending on tank load, pump
Macro Wadding, 250 g (8.8 oz.)
output of 1,800l/h (475 USgal./h), 3 – 4.5W,
0873.010
4.54 
€
230V/50Hz (115V/ 60Hz), dimensions: L 110 x
W 90 x H 255mm (L 4.3 x W 3.5 x H 10 in.),
NanoChem 300 ml (10 oz.)
max. immersion depth approx. 230mm
0950.000
13.11 
€
(9.1 in.), fixed by means of Magnet Holder up
Filter carbon
to a pane thickness of 12mm (0.47 in.).
0870.901
4.92 
€
3163.000
59.66 
€
Quickphos 750 ml (25 oz.)
0910.000
16.56 
€
0920.000
27.23 
€
0930.000
11.33 
€
Silphos 750 ml (25.4 oz.)
Zeolite 750 ml (25 oz.)
Filter fleece
3162.200
5
4.00 
€
Reefpack 250
Filters, skimmers and biological know-how are used in sea water aquariums; natural conditions are obtained, provided that there is a
balance between the input and removal of food and additives. The combination of equipment and know-how results in the fact that pollutants
discharged into the water by some organisms (e.g. fish) are either utilized by other species (e.g. corals, small organisms) or removed by
means of technical equipment (e.g. filters, skimmers).
N
2
+
- ◄-O
2
N
◄
3
◄-NO
-
4
NH
Water change with Comline® Reefpack 250:
Until now, the “usual water change” could not be avoided in aquarium practice due to the high water pollution. Now, the universal and efficient
filtering system Reefpack 250 reduces water changes to a minimum while maintaining the aquarium parameters at a very constant level.
Comline® Reefpack 250
The Comline® Reefpack 250 features an optimum combination of technical filter components for seawater biotopes. It is designed to enable
operating sensitive seawater aquariums from 60 to 250 litres (15 to 65 USgal.) at close-to-nature conditions.
The Comline®nano Reefpack 250 in detail:
Mechanical and chemical filtration with Comline® filter 3162, refillable with any
type of filter medium.
Surface intake for removal of bacteria film, ground intake for heavy particles
and sediments.
Loop current in aquarium by energy saving pump with variable performance
from 250 to 850l/h (70 to 250 USgal./h).
Skimming with Comline® DOC Skimmer 9004, surface intake and high
performance.
Storage tank 5002.10 with a volume of 13 litres (3.4 USgal.), serves as reservoir
for refill water.
Energy consumption of only 8.5W for all components, 230V/50Hz (115V/60Hz).
Supplied ready for installation, including patented Magnet Holder up to a pane
thickness of 12mm (0.47 in.), storage tank and filter cotton. Dimensions including
skimmer cup: L 180 x W 110 x H 305mm (L 7.1 x W 4.3 x H 12 in.).
0250.000
142.45 
€
6
DOC Skimmer
The new DOC skimmers 9415 and 9430 have a very compact construction providing a high output at the same time, and thus can be fitted in
every aquarium cabinet without any problems. They operate in conjunction with TUNZE® Hydrofoamers 9420.04 or 9430.04, which ensures
the foam production and water circulation at the same time.
Intermediate chamber with phase
water: The patented Anti-Overfoaming
System prevent an overfoaming of the
skimmer and regulates the skimming
action according to surface tension of
the aquarium water and water level. The
skimmer operates independently and
automatically sets its best efficiency.
Skimmer cup with large capacity;
also contains the foam reactor;
can be removed easily.
The removable post-filter at the
outlet of the skimmer permits perfect
mechanical filtration through 300
µm (11.8 mil) nylon mesh with
little biological action only. This
ensures that no unwanted nutrient
and nitrate sources develop in
case of longer cleaning intervals.
The filter can be filled with other
filter media, such as activated
carbon or phosphate absorber.
Hydrofoamer Silence places the air
generator at the top of its product class.
The inner mixing cylinder stabilises
the foam rise in the body and
ensures bubble-free output water.
Stable base which also reduces the water
velocity in the lower zone of the skimmer.
350mm
DOC Skimmer 9415
440mm
300mm
Recommended for aquariums up to
1,500 litres (400 USgal.) of salt water.
Immersion depth from 100 to 200 mm
(3.9 to 7.9 in.) without setting.
Dimensions: L 350 x W
300 x H 440 mm (L 13.8 x
W 11.8 x H 17.3 in.).
230 V / 50 Hz, 15 W, water flow
rate: 1,100 l/h (290.6 USgal./h).
Air capacity: 850 l/h (224.5 USgal./h);
skimmer cup volume:
2 l (.52 (USgal.).
9415.000
350mm
DOC Skimmer 9430
490mm
300mm
418.49 
€
Recommended for aquariums up to
3,000 litres (800 USgal.) of salt water.
Immersion depth from 100 mm
(3.9 in.) to 200 mm (7.9 in.)
without setting.
Dimensions: L 350 x W 300
x H 490 mm (L 13.8 x W 11.8
x H 19.3 in.).
230 V / 50 Hz, 24 W (115 V / 60
Hz, 32 W), water flow rate: 1,600 l/h
(422.7 USgal./h)
Air capacity:
1,100 l/h (290.6 USgal./h); skimmer
cup volume: 2 l (.52 USgal.).
9430.000
485.71 
€
7
News
For small aquariums, a stable osmotic balance is important, because they are particularly sensitive to constantly changing salt
concentrations. The Osmolator® nano which was specifically designed for this, is a water level controller with only a single sensor and is
equipped with a processor-based controller that protects against overdosing. It is suitable for nano aquariums or small aquariums up to 200
liters (55 US gallons). The sensor with magnetic holder is light-protected and can be positioned at any desired location on the glass panel.
Osmolator® nano
Water level controller with only one sensor for nano aquariums or
small aquariums with up to 200 liters (55 US gallons), placeable
into cabinet filter systems or on the edge of the aquarium. Scope
of delivery: ready for installation with 11V power supply, lowvoltage metering pump, 3m (118 inch) hose, magnet holder for
up to 10mm (0.39 inch) glass thickness and a protective cover
for the sensor.
3152.000
74.60 
€
Turbelle® stream 6255
WIDE FLOW
for tanks > 4.000 l (1,050 USgal.)
Flow performance: 5,000 to approx.
18,000 l/h (1,300 to 4,800 USgal./h)
Energy consumption: max. 58 W
Power supply unit:100-240V/50-60Hz
Length of cable: 5 m (196.8 in.).
Dimensions: ø90 mm (3.5 in.), output: ø75 mm (3 in.)
Magnet Holder with Silence Clamp with
pane thickness up to 27 mm (1.06 in.).
6255.000
480.67 
€
Silence PRO
Pumping power: 11,000 l/h (2,900 USgal./h).
Energy consumption: 95 to 125W depending on counter-pressure
Pumping head: 4.5 m (177 in.), 1 1/2“ GAS hose connection
Voltage / frequency: 230 V / 50 Hz (115 V / 60 Hz).
Cable length: 3 m (118 in.).
Dimensions without outlet and suction cups: 242 x 120 x 160 mm
(9.5 x 4.7 x 6.3 in.).
1073.110
263.97 
€
Performance tables - Silence pumps
These performance tables include a tolerance of +/- 5 per cent.
www.tunze.com
The prices stated are recommended retail prices in EURO and contain no VAT. Subject to technical modifications, especially those which
further safety and technical progress.
TUNZE Aquarientechnik GmbH - Seeshaupter Strasse 68
82377 Penzberg - Germany
Tel.: +49 (8856) 2022 - Fax.: +49 (8856) 2021