our Espar heater spec sheet for additional information.

Transcription

our Espar heater spec sheet for additional information.
Espar Heater Systems
AIRTRONIC® D2/D4
air heater
Espar’s new line of air heaters is called the AIRTRONIC.
Applications include, bunk heat, small cargo and marine.
The heaters cycle quietly through four heat levels to maintain
comfort, without engine idling. These heaters have fewer
parts and are lighter and smaller than their predecessor.
Air Or Water...
...The Choice Is Yours
Espar Heater Systems have the most comprehensive range of
heaters available in today's marketplace.
Espar is backed by the well established, international corporation
of J. Eberspächer. With over 130 years experience, J.
Eberspächer is a world leader in the manufacturing of fuel fired
heaters. J. Eberspächer pays close attention to detail whilst
integrating the latest technology into their designs.
The support of factory trained technicians is vital to any
modern essential equipment. Espar offers this support through
a well developed and established network of distributors and
dealers across North America. Espar also offers technical
support with bulletins and technical manuals at
www.espar.com
Models are available in 12 & 24 volts. Gasoline versions are
also available.
First Class ...
... in Heater Applications
Heat Output
BTU/hr (kW)
Fuel
Consumption
Boost
High
Med
Low
AIRTRONIC D2
AIRTRONIC D4
7,500 (2.2)
6,150 (1.8)
4,100 (1.2)
2,900 (0.8)
13,600 (4)
10,200 (3)
6,800 (2)
3,400 (1)
Diesel 1, 2 or kerosene
Boost
0.07 (0.28)
High
0.06 (0.23)
Med
0.04 (0.14)
Low
0.02 (0.10)
0.13 (0.51)
0.10 (0.38)
0.07 (0.25)
0.03 (0.13)
Electrical (12v)
Consumption
Boost
High
Med
Low
2.8 amps
1.9 amps
1.0 amps
0.67 amps
3.3 amps
2.0 amps
1.1 amps
0.6 amps
Air throughput
Boost
High
Med
Low
48
40
27
19
D1LC/D3LC compact
air heater
Our original compact heaters are designed for applications
such as cab and sleeper heating, small cargo and marine.
The heaters cycle quietly through four heat levels to
maintain comfort, without engine idling. The heaters have
high heat output with low fuel and power consumption.
Heat Output
BTU/hr (kW)
D3LC compact
7,500 (2.2)
6,150 (1.8)
4,100 (1.2)
2,900 (0.8)
12,000 (3.5)
11,000 (3.2)
5,100 (1.5)
3,400 (1.0)
air heater
Combining high heat output with a relatively small size, the
D5LC is well suited for a variety of installations. These include
RV’s, school buses, utility vehicles, medium cargo and
marine.
Heat Output
BTU/hr (kW)
Fuel
Consumption
Boost 18,800 (5.5), High 16,400 (4.8)
Med 9,200 (2.7), Low 4,100 (1.2)
D8LC
air heater
A powerful air heater for its size, this heater is well suited for
full size trailer, cargo and larger marine applications.
Heat Output
High 27,300 (8.0), Low 11,900 (3.5)
BTU/hr (kW)
US.gal/hr (l/hr)
Diesel 1, 2 or kerosene
Boost 0.18 (0.70), High 0.15 (0.58)
Med 0.09 (0.34), Low 0.04 (0.15)
Fuel
Consumption
US.gal/hr (l/hr)
Diesel 1, 2 or kerosene
High 0.26 (1.0)
Low 0.11 (0.4)
Diesel 1, 2 or kerosene
Boost
0.07 (0.27)
High
0.06 (0.21)
Med
0.04 (0.14)
Low
0.02 (0.10)
0.11 (0.42)
0.10 (0.37)
0.05 (0.18)
0.03 (0.12)
Electrical (12v)
Consumption
Boost 6.7 amps, High 6.7 amps
Med 3.3 amps, Low 3.3 amps
Electrical (12v)
Consumption
High 9.6 amps
Low 9.6 amps
Air throughput
Boost 137, high 137, med 81, low 81
Air throughput
High 151, low 146
Electrical (12v)
Consumption
Boost
High
Med
Low
2.5 amps
1.8 amps
0.8 amps
0.8 amps
3.0 amps
3.0 amps
1.0 amps
0.7 amps
cfm
85
69
50
30
Air throughput
Boost
High
Med
Low
50
43
30
30
78
78
39
32
6 lbs. (2.7 kg)
9.9 lbs. (4.5 kg)
Weight
D2- 12.2” (310) D4- 14.6” (371)
D2- 4.5”(115) D4- 5.5”(140)
US.gal/hr (l/hr)
cfm
Weight
Fuel
Consumption
Boost
High
Med
Low
D1LC compact
D5LC
US.gal/hr (l/hr)
cfm
D2-4.8”(122)
D4-5.9”(150)
7.7 lbs. (3.5 kg)
D1LC - 360 (14”) D3LC - 422 (16.6”)
Weight
Weight
Espar provides a variety of control options including:
manual switches, thermostats, mini-controllers and modular
timers (which can be programmed up to 7 days). Consult
your dealer for the one best suited to your application.
Espar Heater Systems has
over 300 dealers and
distributors in North
America. Contact your
nearest dealer for pricing
and availability. You can
find our dealer network at
www.espar.com
Espar Products, Inc.
6435 Kestrel Road
Mississauga • Ontario
Canada • L5T 1Z8
Canada:
Fax:
905-670-0960
800-668-5676
905-670-0728
U.S.:
800-387-4800
www.espar.com
[email protected]
*Model D12L is available
through special order. This
heater features a 41,000 BTU
output.
cfm
17.6 lbs. (8 kg)
Control Options
Sales & Service
44 lbs. (20 kg)
14.3 lbs. (6.5 kg)
D1LC - 124.5 (5”) D3LC - 148 (6”)
525.5 (20.75”)
260 (10.25”)
179 (7”)
D1-132.5(5.3”)
D3-160 (6.3”)
653 (25.5”)
A member of the Worldwide Eberspächer Group of
Companies
P/N: 601-101-0403-A
* and
Including the new AIRTRONIC
* series
HYDRONIC
Independent Vehicle &
Marine Heaters from
Espar Heater Systems
Top of its class...
HYDRONIC® 4
coolant heater
This compact water heater offers an affordable engine
preheating solution for cars and trucks. It features automatic
heat regulation while being fuel and power efficient. It is
complimented by Espar’s new AIRTRONIC air heater.
Type
Heat Output
HYDRONIC® 5
coolant heater
The HYDRONIC 5 water heater preheats trucks, buses, and
off-road equipment engines quickly, ensuring an easy start
on cold winter mornings. This asset eliminates the high cost
of idling or maintaining electrical plug-ins. Its compact size
makes for an easy and simple installation
D7W
A high heat output relative to its size enables this heater to
preheat many off-road applications. 24v version only.
Coolant heater
Type
Coolant heater
Type
Coolant heater
Boost 14,700 (4.3), Low 8,200 (2.4)
Heat Output
High 17,000 (5.0), Low 8,200 (2.4)
Heat Output
High 24,000 (7.0), Low 6,000 (1.8)
BTU/hr (kW)
BTU/hr (kW)
Fuel
Consumption
US.gal/hr (l/hr)
Electrical (12v)
Consumption
Starting 10 amps, High 4 amps,
Low 1.9 amps, Standby 0.8 amps
Electrical (12v)
Consumption
Starting 10 amps, High 4.2 amps,
Low 1.9 amps, Standby 0.8 amps
Electrical (24v)
Consumption
Water
throughput
238 US gal/hr against 0.1 bar
(900 l/hr against 0.1 bar)
Water
throughput
238 US gal/hr against 0.1 bar
(900 l/hr against 0.1 bar)
Weight
6.4 lbs. (2.9 kg)
Weight
6.4 lbs. (2.9 kg)
250 (9.75”)
90 (3.5”)
Diesel 1, 2, kerosene
High 0.16 (0.62), Low 0.08 (0.30)
US.gal/hr (l/hr)
Fuel
Consumption
Diesel 1, 2, kerosene
High 0.24 (0.90), Low 0.06 (0.22)
coolant heater
This powerful, compact and light weight heating system is
rugged in design, which makes it ideal for providing engine,
fuel and hydraulic pre-heat for off-road equipment. It is also
suitable for providing both engine and supplemental cabin
heat for buses and boats.
Heat Output
BTU/hr (kW)
D12W
coolant heater
This “workhorse” is commonly used to provide supplemental
engine preheat and comfort heat on coaches. 24v version
only.
Coolant heater
Type
Coolant heater
Boost 32,400 (9.5), High 25,600 (7.5),
Med 10,900 (3.2), Low 5,100 (1.5)
Heat Output
High 41,000 (12.0), Low 24,700 (7.3)
Heat Output
HYDRONIC 16 HYDRONIC 24 HYDRONIC 30 HYDRONIC 35 -
BTU/hr (kW)
BTU/hr (kW)
US.gal/hr (l/hr)
High 3.75 amps, Low 2.1 amps
Electrical (12v)
Consumption
Boost 10.4 amps, High 6.3 amps
Med 3.5 amps, Low 2.9 amps
Electrical (24v)
Consumption
High 3.5 amps, Low 3.5 amps
Water
throughput
420 US gal/hr against 0.1 bar
(1600 l/hr against 0.1 bar)
Water
throughput
370 US gal/hr against 0.14 bar
(1400 l/hr against 0.14 bar)
Water
throughput
476 US gal/hr against 0.15 bar
(1800 l/hr against 0.15 bar)
Weight
11 lbs. (5 kg)
Weight
14.3 lbs. (6.5 kg)
Weight
33 lbs. (15 kg)
330 (13”)
90 (3.5”)
320 (12.5”)
128 (5”)
For the largest coaches, boats and off-road engines.
Typically used on large earth moving equipment, these
heaters can be incorporated to provide engine, fuel and
hydraulic preheat. The first choice for those who require
rapid heating when operating in “Arctic-like” climates. 24v
version only.
Type
Fuel
Consumption
Fuel
Consumption
HYDRONIC® 16/24/30/35
Coolant heater
Diesel 1, 2, kerosene
Boost 0.32 (1.2), High 0.24 (0.9)
Med 0.11 (0.4), Low 0.05 (0.18)
US.gal/hr (l/hr)
250 (9.75”)
HYDRONIC® 10
Type
BTU/hr (kW)
Diesel 1, 2 or kerosene
High 0.11 (0.40),
Low 0.05 (0.20)
Fuel
Consumption
coolant heater
134 (5.3”)
Diesel 1, 2 or kerosene
High 0.44 (1.65), Low 0.26 (1.00)
US.gal/hr (l/hr)
Fuel
Consumption
US.gal/hr (l/hr)
54,630 (16)
82,000 (24)
102,000 (30)
120,000 (35)
Diesel 1, 2 or kerosene
HYDRONIC 16 - High 0.48 (1.8)
HYDRONIC 24 - High 0.61 (2.35)
HYDRONIC 30 - High 0.76 (2.95)
HYDRONIC 35 - High 0.88 (3.4)
Electrical (24v)
Consumption
HYDRONIC 16 - High 2.1 amps
HYDRONIC 24 - High 3.3 amps
HYDRONIC 30 - High 3.95 amps
HYDRONIC 35 - High 5.0 amps
Water
throughput
1,320 US gal/hr against 0.2 bar
(5,000 l/hr against 0.2 bar)
Weight
40 lbs. (18 kg)
540 (21.25”)
183 (7.25”)
230 (9”)
Warm engine starts
Provides comfort
Economical
Safe
600 (24”)
P/N: 601-101-0403-A
Espar

Similar documents

Airtronic D2/D4/D5 Spec Sheet - Espar

Airtronic D2/D4/D5 Spec Sheet - Espar The AIRTRONIC heaters are designed for many types of applications. They are especially suited for cab and sleeper heat in trucks, workshop vehicles, freight compartments and interior heat in general.

More information

list of current eligible equipment

list of current eligible equipment Power Technology Southeast RigMaster Power by Mobile Thermo Systems Inc. RigMaster Power by Mobile Thermo Systems Inc. RigMaster Power by Mobile Thermo Systems Inc.

More information