Aesculap Surgical Technologies SterilContainer™ System

Transcription

Aesculap Surgical Technologies SterilContainer™ System
Aesculap Surgical Technologies
SterilContainer™ System
General catalog
Table of Contents
Introduction
• History....................................................................................................................................2–4
• SterilContainer™ Design..................................................................................................5–8
SterilContainer System Containers & Baskets.....................................................................9–22
• Full-Size Containers, Lids and Baskets.........................................................................10–11
• Three-Quarter Size ............................................................................................................12–13
• Half Size ...............................................................................................................................14–15
• Extra-Long Mini Size Containers ..................................................................................16
• Extra-Long Size ...................................................................................................................17
• Quarter Size ........................................................................................................................18
• Mini Size................................................................................................................................19
• Wide-Body Size and Flash-Guard..................................................................................20
• SterilContainer S™..............................................................................................................21
• Baskets for Wrapped Sets ................................................................................................22
Instrument Organization System..............................................................................................23-32
Disposables ........................................................................................................................................33-36
General Accessories .......................................................................................................................37-53
• Identification Labels, Tags, Stringers & Clamps.........................................................38-39
• Instrument Holders and Holding Pins...........................................................................40-41
• Endoscopy Storage Accessories ......................................................................................42-43
• Instrument Storage Racks................................................................................................44-45
• Basket Dividers ....................................................................................................................46-47
• Micro Instrument Holders, Racks and Trays ...............................................................48-51
• Mats, Lubricants and Cleaners .......................................................................................52-53
Storage and Transport..................................................................................................................54-59
• Storage Racks, Carts, Preparation Tables and Container Lift ................................54-58
• Display Boards and Instrument Holders.......................................................................59
Miscellaneous...................................................................................................................................60-62
• Metal Sponge Bowl............................................................................................................60
• SterilContainer Replacement Parts................................................................................61
• BIO-BIN™ Containers .........................................................................................................62
Example Instrument Set Sizing Guide....................................................................................64-65
SterilContainer Product Dimensions .......................................................................................66-75
Numerical Index ..............................................................................................................................76-78
Surgical Technologies Key Product Literature....................................................................79
Sterilization Modalities Study...................................................................................................80
TO ORDER: Contact your AESCULAP Sales Representative
or phone Customer Service at 1-800-282-9000.
1
History
Blending Old World Craftsmanship with Modern Technology
Our founding father:
Gottfried Jetter
Aesculap.
As the world’s largest surgical instrument
manufacturer, Aesculap designs and
produces surgical instruments, implants
and motors for several surgical specialties
including: ENT, plastic and reconstructive,
thoracic, cardiovascular, orthopedic,
gynecologic and general surgery as well
as neurosurgery and minimally-invasive
surgery.
Aesculap’s success derives from
a history of:
Aesculap’s product range:
I Quality craftsmanship
I Neuroendoscopy
I Surgeons’ designs united with
I Surgical instruments for all disciplines
The company was founded in 1867 by
master craftsman Gottfried Jetter in
Tuttlingen, Germany. For more than
140 years, the name Aesculap has been
synonymous with quality throughout
the world.
I Intense communication with our
Today, modern technology blends with
Aesculap Old World tradition to provide
healthcare professionals with the widest
array of surgical instrumentation
available from a single manufacturer.
I Decades of international training
2
instrument expertise
I Total commitment to customer
service
customers
I Sterile containers
I Endoscopy
I Aneurysm clips
I Power systems
I National sales force
I Ultrasonic aspiration
I National hands-on workshops,
I Spinal implants
specialized by discipline
at the Aesculap Academy – Tuttlingen,
Germany
I Orthopedics
I Per-procedure programs
I Repair services
I Consulting services
U.S. Headquarters
Visit our online catalog at: www.surgical-instruments-usa.info
U.S. Headquarters
Please call customer service for:
Our U.S. Headquarters, located in Center
Valley, Pennsylvania, was established
in 1977 to serve the needs of the U.S.
market.
I Placing orders
Aesculap, Inc.
3773 Corporate Parkway
Center Valley, PA 18034
Phone 800-258-1946
Fax
610-791-6880
www.aesculapusa.com
I Product information
I Pricing
I Custom product information
Aesculap’s Number One Core Value is
simple: CUSTOMERS COME FIRST.
Our primary goal is to exceed the
expectations of the medical
professionals who depend on our
products to deliver healthcare to their
patients.
Our Customer Service Professionals are
dedicated to serving the needs of all of
our valued customers.
Customer Service:
Phone: 800-282-9000
Fax:
610-791-6886
Email: [email protected]
3
History
RIGID PACKAGING SYSTEMS: A CHRONOLOGY
1890s — Aesculap created the first rigid containers,
originally made of stainless steel. In the early 1900s, while
responding to the needs of military hospitals and aid
stations, Aesculap manufactured chrome-plated
containers for safe transport of sterile instruments.
Aesculap introduced reusable filters in the 1930s,
replacing valves and sliding vents. Rubber gaskets were
added shortly thereafter, to ensure a proper seal between
the lid and container bottom.
1890s
Since the 1960s, Aesculap containers have been
manufactured from a lightweight anodized aluminum,
which provides optimal heat transfer properties. The lightweight
construction also allows for easy handling and stacking.
As technology has advanced, disposable, non-woven filters
have replaced the textile filters.
At the Association of Operating Room Nurses (AORN)
Congress in 1980, Aesculap introduced the concept
of Rigid Packaging for sterilization in the United States. Since
that time Aesculap has consistently innovated and improved its
products, introducing new generations of containers in 1984,
1988, 2000 and 2004.
1900s
2010 marks Aesculap’s 30th anniversary of being the first vendor
to introduce rigid sterilization container systems to the United
States. Since 1980, Aesculap has grown to be the market leader
by providing you unparalleled product quality and service.
Over 3,000 hospitals and surgery centers use the
SterilContainer™ System today. Cost-effective quality and
durability are the hallmarks of the SterilContainer System.
1930s
Being the first with the finest has kept Aesculap the
undisputed quality leader in the rigid packaging industry.
1960s
4
DESIGN FEATURES
Case Design
• Superior construction of lightweight aluminum that weighs
15% to 20% less than other containers of similar size.
Handle Design
• 90° stops to avoid pinching
• One-piece design for durability
• Centered, for even weight distribution
Superior Latch Design
• Single-step open and close
• One-piece construction
• Centrally located for balance and control
• No protruding parts when placed into washer/decontaminator
• Audible click to announce proper latch closure
Retention Plate & Silicone Gasket
• One-piece, one-step operation allows for quick filter change
• Audible “click” signifies proper closure
• Dual safety release buttons prevent accidental release
• Filter post and silicone gasket assure proper filter placement
• Complete seal between filter and lid
Lid Design
• One-piece construction for easier maintenance and lower
repair costs
• Lighter in weight for easy handling
Container Bottom
• No protruding feet to catch on shelving
• Easily supports instrument loads
• Elevated area supports basket contents well above
container bottom
5
Innovation
PrimeLine® Lids
PrimeLine Lids feature a reusable filter
system and are resistant to scratches,
deformation and color fading so your
system will look and perform like new
over its service life.
The lids are manufactured from a high
grade polymer PPSU, polyphenylsulfone
commonly known as Radel R.
The lids are offered in six colors and clear.
The color coding allows staff to organize
instrument sets by specialty for efficient
processing. The clear lids allow visual
inspection of the instrument set prior to
breaking the sterile seal.
PrimeLine lids are available for use in
PreVac Terminal Steam sterilization and
PreVac Flash sterilization.
Advantages of the reusable
filter system:
• Proven PTFE (PolyTetraFluorEthylene)
filter technology
• Reduced costs for consumables
• Reduced costs for handling and
repairs
• Compatible with all container
bottoms made since 1988
6
PrimeLine container lids are made of a
high-grade, thermostable plastic in six
different colors and clear. The special
plastic makes the lids resistant against
impact, scratches, deformation and
discoloration.
Important processing
advice for PrimeLine®:
• Do not use solvents such as
acetone or benzine
• Final rinse with distilled
or fully de-mineralized water
• Make certain there are no
residues from the cleaning
process left on the lid
7
Design
Advantages of the Aesculap SterilContainer™ System
• Safer...
for patients and hospital staff. Aesculap SterilContainers ensure proper storage, transportation and
sterilization of surgical instruments.
• Cost-effective reusable container system...
owing to their one-time procurement cost, low operating cost and long service life.
• Easy to handle...
simple, fast and efficient — lightweight aluminum and ergonomic handles.
• Clear identification...
using colored lids, indicator labels, identification labels and barcoding… clearly identifiable and standardized,
easy to track and document.
In addition to a full line of containers, Aesculap also offers storage systems, instrument racks and convenient
disposable products to support all of your sterilization needs.
8
SterilContainer™ System
Containers & Baskets
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
9
Full-Size Containers
FULL-SIZE CONTAINERS - Length 23 ⁄
1
Perforated Bottoms
with Retention Plates
4
x width 11 1⁄4
Solid Bottoms
FULL-SIZE CONTAINER LIDS
Aluminum SterilContainer™ 2000 Lid
JN440
JK440
JK485 Full-size red lid
1
4 ⁄4-inch height
JK486 Full-size blue lid
JK487 Full-size green lid
JK488 Full-size gold lid
JN441
JK441
5 1⁄2-inch height
JK489 Full-size silver lid
Note: Filter requirements when used with aluminum lids:
Perforated full-size container with lids require four round filters.
Solid full size container with lids require two round filters.
PrimeLine® Lids with reusable filter
JN442
JK442
6-inch height
JP001 Full-size red lid
JP002 Full-size blue lid
JP003 Full-size green lid
JP004 Full-size ocher lid
JN444
JK444
JP005 Full-size gray lid
8-inch height
JP006 Full-size anthracite lid
JP007 Full-size clear lid
Note: Filter requirements when used with PrimeLine lids:
Perforated full-size container with lids require two round paper filters.
Solid full size container with lids require no additional filters.
JN446
10 1⁄2-inch height
10
JK446
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
FULL-SIZE STAINLESS STEEL BASKETS
Length x Width x Height
JC222R
Outside (in.)
• Rounded corners
• Wide, hideaway handles
• Stamped metal feet
21 1⁄4 x 10 x 2
JC223R
211⁄4 x 10 x 23⁄4
JC223R
Perforated Basket
Outside (in.)
JC224R
Outside (in.)
21 1⁄4 x 10 x 33⁄4
PERFORATED BASKETS
Length x Width x Height
JF221R
Outside (in.)
• Fold-in handles
• Plastic feet
21 1⁄4 x 10 x 1 1⁄2*
JF222R
21 1⁄4 x 10 x 2 1⁄4*
JF222R
Perforated Basket
Outside (in.)
JF223R
Outside (in.)
211⁄4 x 10 x 3*
JF224R
Outside (in.)
21 1⁄4 x 10 x 4 1⁄8*
BASKET COVER FOR PERFORATED BASKETS
Length x Width x Height
JF227R
Outside (in.)
21 1⁄2 x 10 1⁄16 x 3⁄4
* Basket height includes feet
JF227R
Perforated Basket Cover for
use with JF221R, JF222R,
JF223R and JF224R
Refer to page 45 for lifting platform products
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
11
Three-Quarter Size Containers
THREE-QUARTER SIZE CONTAINERS - Length 18 ⁄
1
Perforated Bottoms
with Retention Plates
Solid Bottoms
2
x width 11 1⁄4
THREE-QUARTER SIZE CONTAINER LIDS
Aluminum SterilContainer™ 2000 Lid
JK785 Three-quarter size red lid
JN740
JK740
JK786 Three-quarter size blue lid
1
4 ⁄4-inch height
JK787 Three-quarter size green lid
JK788 Three-quarter size gold lid
JK789 Three-quarter size silver lid
Note: Filter requirements when used with aluminum lids:
JN741
JK741
51⁄2-inch height
Perforated three-quarter size container with lids require two round filters.
Solid three-quarter size container with lids require one round filter.
PrimeLine® Lids with reusable filter
JP011 Three-quarter size red lid
JN742
6-inch height
JK742
JP012 Three-quarter size blue lid
JP013 Three-quarter size green lid
JP014 Three-quarter size ocher lid
JP015 Three-quarter size gray lid
JN744
JP016 Three-quarter size
anthracite lid
8-inch height
JP017 Three-quarter size clear lid
Note: Filter requirements when used with PrimeLine lids:
Perforated three-quarter size container with lids require one round paper
filter. Solid three-quarter size container with lids require no additional
filters.
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
12
THREE-QUARTER SIZE STAINLESS STEEL BASKETS
Length x Width x Height
JC252R
Outside (in.)
• Rounded corners
• Wide, hideaway handles
• Stamped metal feet
16 x 10 x 2
JC253R
16 x 10 x 23⁄4
JC253R
Perforated Basket
Outside (in.)
JC254R
Outside (in.)
16 x 10 x 4
PERFORATED BASKETS
Length x Width x Height
JF251R
Outside (in.)
• Fold-in handles
• Plastic feet
16 x 10 x 11⁄2*
JF252R
16 x 10 x 21⁄4*
JF252R
Perforated Basket
Outside (in.)
JF253R
Outside (in.)
16 x 10 x 3*
JF254R
Outside (in.)
16 x 10 x 41⁄8*
BASKET COVER FOR PERFORATED BASKETS
Length x Width x Height
JF257R
Outside (in.)
161⁄2 x 107⁄8 x 3⁄4
* Basket height includes feet
JF257R
Perforated Basket Cover for
use with JF251R, JF252R,
JF253R and JF254R
*All dimensions shown here are outside dimensions with the
lid. For internal dimensions, please see pages 66-75.
13
Half-Size Containers
HALF-SIZE CONTAINERS - Length 11 ⁄
3
Perforated Bottoms
with Retention Plates
4
x width 11 1⁄4
Solid Bottoms
HALF-SIZE CONTAINER LIDS
Aluminum SterilContainer™ 2000 Lid
JK385 Half-size red lid
JN340
JK340
JK386 Half-size blue lid
1
4 ⁄4-inch height
JK387 Half-size green lid
JK388 Half-size gold lid
JK389 Half-size silver lid
Note: Filter requirements when used with aluminum lids:
JN341
JK341
Perforated half-size container with lids require two round filters.
Solid half-size container with lids require one round filter.
51⁄2-inch height
PrimeLine® Lids with reusable filter
JP021 Half-size red lid
JN342
JK342
JP022 Half-size blue lid
6-inch height
JP023 Half-size green lid
JP024 Half-size ocher lid
JP025 Half-size gray lid
JP026 Half-size anthracite lid
JN344
JK344
JP027 Half-size clear lid
8-inch height
Note: Filter requirements when used with PrimeLine lids:
Perforated half-size container with lids require one round paper filter.
Solid half-size container with lids require no additional filter.
JN346
101⁄2-inch height
14
JK346
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
HALF-SIZE STAINLESS STEEL BASKETS
Length x Width x Height
JC112R
Outside (in.)
• Rounded corners
• Wide, hideaway handles
• Stamped metal feet
91⁄2 x 10 x 2
JC113R
91⁄2 x 10 x 23⁄4
JC113R
Perforated Basket
Outside (in.)
JC114R
Outside (in.)
91⁄2 x 10 x 4
PERFORATED BASKETS
Length x Width x Height
JF111R
Outside (in.)
• Fold-in handles
• Plastic feet
10 x 97⁄8 x 11⁄2*
JF112R
10 x 97⁄8 x 21⁄4*
JF112R
Perforated Basket
Outside (in.)
JF113R
Outside (in.)
10 x 97⁄8 x 3*
JF114R
Outside (in.)
10 x 97⁄8 x 41⁄8*
BASKET COVER FOR PERFORATED BASKETS
Length x Width x Height
JF117R
Outside (in.)
101⁄8 x 93⁄4 x 3⁄4
* Basket height includes feet
JF117R
Perforated Basket Cover for
use with JF111R, JF112R,
JF113R and JF114R
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
15
Extra-Long Mini Size Containers
EXTRA-LONG MINI SIZE CONTAINERS
- Length 20 x width 51⁄2
Non-Anodized
Anodized for Steam and EtO
JM020
JM021
3-inch height
JN021
3-inch height
JK020
3-inch height
3-inch height
Filter Requirements: Two (4” x 9” filters)
EXTRA-LONG MINI SIZE CONTAINER BASKET
Length x Width x Height
JF435R
Outside (in.)
20 x 51⁄4 x 13⁄4
JF435R
Scope basket with lid, fits into
Extra-Long mini container
EXTRA-LONG MINI SIZE CONTAINER ACCESSORIES
JG367
JG368
Silicone Scope Eyepiece Holder Silicone Scope Sleeve Holder
JF343
Fixation Pin
US999
Single Use Paper Filter 4” x 9”
for steam and EtO
JG300 fixation screws sold separately
16
JG369
Support for Angled Optics
MD355
Single Use Polypropylene
Filter 4” x 9”
JG340
Small Silicone Holder for
5 mm instruments
MD346
Process Indicator Card for
steam and EtO
JG343
Small Silicone Holder for
10 mm instruments
MD334
Process Indicator Card
for STERRAD®
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
Extra-Long Containers
EXTRA-LONG CONTAINER - Length 26 ⁄
1
Perforated Bottom
JN445
4
x width 111⁄4
Lid with Retention Plates
JK490
JK490 - Extra-Long Container Lid
8-inch height
EXTRA-LONG PERFORATED BASKET
Perforated Basket
Length x Width x Height
JF232R
Outside (in.)
26 x 10 x 21⁄4
JF232R
EXTRA-LONG CONTAINER ACCESSORIES
JF933
Extra-Long Silicone Mat
MD375
Endorack Storage Rack,
Extra Long
Holds 14 Endoscopic Instruments.
Fits into an extra-long sized,
8" deep SterilContainer™.
MD379
PL961R
Endorack Storage System,
Extra Long
Includes Endorack, Silicone Mat,
and 2"-high Perforated Basket.
PL961R
Endorack Extra-Long,
perforated basket and
silicone mesh mat, for
instruments with shaft-length
up to 42 cm, fits into JN445
PL964R
PL964R
Endorack Extra-Long, fits into
8” height, Extra-Long
SterilContainer
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
17
Quarter-Size Containers
QUARTER-SIZE CONTAINERS - Length 12 ⁄
1
Container System
(Perforated Bottoms Only)
JN092
7
1 ⁄8-inch height
JN094
1
2 ⁄2-inch height
JN095
5
3 ⁄8-inch height
JN096
2
x width 7 1⁄2
Baskets
Quarter-Size Replacement Lid
JG381R
JN091
Quarter-Size Perforated Basket with Lid
and Three Instrument Racks
Length x Width x Height - Outside (in.)
103⁄4 x 7 x 13⁄16
JF264R
MD374
Quarter-Size Perforated Basket with Lid Quarter-Size Perforated Basket with Lid
Length x Width x Height - Outside (in.) and Silicone Cushioning Rack
103⁄4 x 7 x 15⁄8
Length x Width x Height - Outside (in.)
103⁄4 x 7 x 15⁄8
JG381R
Quarter-Size Perforated Basket with Lid
and Three Instrument Racks
Two Stacked can fit into JN095
Length x Width x Height - Outside (in.)
103⁄4 x 7 13⁄16
JF282R
JG380R
Mini-Size Perforated Basket with Lid
and Three Instrument Racks
Two side by side will fit into JN094
Length x Width x Height - Outside (in.)
103⁄4 x 35⁄16 x 13⁄16
JG384R
Quarter-Size Perforated Basket with Lid
and Three Instrument Racks
One JG381R and one JG384R can fit
into JN095
Length x Width x Height - Outside (in.)
103⁄4 x 7 x 15⁄8
JF289R
Cover for JF282R
Quarter-Size Tray with lid, fits into
Quarter-Size Lid for tray JF282R
container JN096
Length x Width x Height - Outside (in.)
Length x Width x Height - Outside (in.) 103⁄4 x 7 x 5⁄8
105⁄8 x 63⁄4 x 35⁄8
*All dimensions shown here are outside dimensions with the lid.
Filter Requirements: Perforated Bottoms with lids require two US992 or JK092 filters. (6 1⁄2" x 9")
For internal dimensions, please see pages 66-75.
5 1⁄8-inch height
18
Mini-Size Containers
MINI-SIZE CONTAINERS
Perforated Bottoms
with Retention Plate
- Length 121⁄4 x width 51⁄2
Solid Bottoms
MINI-SIZE CONTAINER LIDS
Aluminum SterilContainer™ 2000 Lid
JK170 Mini-size red lid
JK187
JN187
1 1⁄2-inch height
1 1⁄2-inch height
JK171 Mini-size blue lid
NOTE: Shallow Mini container does not have an internal basket, however a Mini mat
can be used.
JK172 Mini-size green lid
JK173 Mini-size gold lid
JK174 Mini-size silver lid
JN188
JK188
5
2 ⁄8-inch height
5
2 ⁄8-inch height
MINI-SIZE CONTAINER BASKETS
Mini Perforated Basket
with Lid
Mini Perforated Basket with Lid,
Silicone Cushioning Rack and Divider
JG380R
JF159R
Mini-Size Tray for micro instruments fits
into an Aesculap Mini container JK188
or JN188.
Mini-Size Tray contains three instrument
racks fits into JN188 or JK188
Length x Width x Height
JF159R
Outside (in.)
101⁄2 x 5 x 2
Length x Width x Height
JG380R
Outside (in.)
103⁄4 x 33⁄8 x 15⁄8
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
19
Wide-Body Containers
WIDE-BODY CONTAINERS & WIRE MESH BASKETS
Perforated Bottom
(Dimensions are with Lid)
Wide-Body Basket
Length x Width x Height
JN817
Length x Width x Height
Outside (in.)
5
3
JE167R
3
23 ⁄8 x 15 ⁄4 x 4 ⁄4
JN821
JK821 & JE601
21 x 131⁄4 x 2
Outside (in.)
5
3
23 ⁄8 x 15 ⁄4 x 7
Outside (in.)
JE168R
JE169R
Outside (in.)
21 x 131⁄4 x 3
JE169R
Solid Bottoms
Outside (in.)
21 x 131⁄4 x 4
Length x Width x Height
JK817
Outside (in.)
235⁄8 x 153⁄4 x 43⁄4
JK821
Outside (in.)
235⁄8 x 153⁄4 x 7
JE601
Wide body lid
Flash-Guard Flash Container System
Patented design works in synchronization with flash gravity displacement sterilizers. The Flash-Guard system is capable of both 3 and
10 min. cycles at 270°F. This closed container system provides aseptic transfer of sterilized items to the sterile field and assures
fail-safe performance.
FLASH-GUARD HALF-SIZE & FULL-SIZE FLASH CONTAINER SYSTEM
Lid and
Solid Bottom
Lid and
Solid Bottom
Length x Width x Height
Length x Width x Height
MD884
MD885
Outside (in.)
7
237⁄8 x 11 x 87⁄8
12 x 11 x 8 ⁄8
MD884
MD363 - Universal Handle for Flashguard, included
with Flash-Guard Container
20
Outside (in.)
MD885
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
SterilContainer S ™
The Aesculap SterilContainer S Product family is available for use in the following STERRAD® Systems*:
STERRAD NX™ System
STERRAD 100S System
STERRAD 100NX System
STERRAD 200 System
FULL-SIZE CONTAINER S BOTTOMS - Length 23 ⁄
1
4
and Vacuum Steam Sterilization
1
x width 11 ⁄4
Full-Size Bottoms
4 1⁄4-inch height
JM442
JM441
JM440
5 1⁄2-inch height
6-inch height
THREE-QUARTER SIZE CONTAINER S BOTTOMS - Length 18 ⁄
1
2
x width 111⁄4
Three-Quarter Size Bottoms
JM741
JM740
4 1⁄4-inch height
JM742
5 1⁄2-inch height
6-inch height
HALF-SIZE CONTAINER S BOTTOMS - Length 11 ⁄
3
4
1
x width 11 ⁄4
Half Size Bottoms
JM341
JM340
4 1⁄4-inch height
5 1⁄2-inch height
JM342
6-inch height
SterilContainer S LIDS
Full, Three-Quarter and Half-Size Lids
JM489
JM489 Full-Size Lid
JM789
JM789 Three-Quarter Size Lid
JM389
JM389 Half-Size Lid
STERRAD is a registered trademark and NX and 100™ are trademarks of Advanced Sterilization Products (ASP), a Division of Ethicon, Inc., a Johnson & Johnson company.
*All dimensions shown here are outside dimensions with the lid. For internal dimensions, please see pages 66-75.
21
Baskets for Wrapped Sets
AESCULAP BASKET WITH FEET
Aesculap, the market leader in Sterile Processing, extends it’s portfolio of baskets to give customers more choices for full,
three-quarter and half-size instrument sets. The HoneyComb Basket System is offered in three heights without feet. The baskets
without feet are ideal for customers that want Aesculap quality when wrapping those “yet-to-be-containerized” sets.
Aesculap Basket without feet
Half-Size
Outer dimensions
Three-Quarter
Outer dimensions
Full-Size
Outer dimensions
Basket
Inner dimensions
Size Basket
Inner dimensions
Basket
Inner dimensions
JB112R
91⁄2” x 10” x 13⁄4”
91⁄8” x 95⁄8” x 15⁄8”
JB252R
16” x 10” x 13⁄4”
155⁄8” x 95⁄8” x 15⁄8”
JB222R
211⁄4” x 10” x 13⁄4”
207⁄8” x 95⁄8” x 15⁄8”
JB113R
91⁄2” x 10” x 21⁄2”
91⁄8” x 95⁄8” x 23⁄8”
JB253R
16” x 10” x 21⁄2”
155⁄8” x 95⁄8” x 23⁄8”
JB223R
211⁄4” x 10” x 21⁄2”
207⁄8” x 95⁄8” x 23⁄8”
JB114R
91⁄2” x 10” x 33⁄4”
91⁄8” x 95⁄8” x 35⁄8”
JB254R
16” x 10” x 33⁄4”
155⁄8” x 95⁄8” x 35⁄8”
JB224R
211⁄4” x 10” x 33⁄4”
207⁄8” x 95⁄8” x 35⁄8”
Wide, easy-to-locate handle
Easy, aseptic removal from container
Compatible with Aesculap’s Instrument Organization
System (IOS)
*All dimensions shown here are outside dimensions with the lid.
For internal dimensions, please see pages 66-75.
22
Instrument Organization
System
23
Instrument Organization System
Organization and protection of surgical instruments
Aesculap’s new Instrument Organization System is an
advanced system of organizing, storing and protecting
your instrument set during transportation and
sterilization.
• Instruments organized with the Instrument
Organization System are guarded against damage
from instrument-on-instrument impact during
transportation
• Protected instruments reduce the cost of repairs
& reduce set down time
• Protected instruments increase instrument life &
reduce replacement cost
In the O.R. a set organized with Aesculap’s Instrument
Organization System can also help cases flow more
efficiently by:
• Allowing staff to quickly identify and select the
correct instruments
• Work directly from the organized set
• Replace used instruments into the correct slot
making final instrument count easier
During sterilization, Aesculap’s Instrument Organization
System allows:
• Better sterilant flow between instruments
• Consistent sterilization results every time because
your instruments are in the same place
24
Tympanoplasty set
Bone tray accessory
Micro instrument tray
25
Instrument Organization System
SILICONE INSTRUMENT RACKS (Mounting Type A)*
JG304 - 43⁄4” x 11⁄2”
JG305 - 61⁄4” x 11⁄2”
JG306 - 91⁄2” x 11⁄2”
JG308 - 43⁄4” x 11⁄2”
JG309 - 61⁄4” x 11⁄2”
JG310 - 91⁄2” x 11⁄2”
JG312 - 43⁄4” x 11⁄2”
JG313 - 61⁄4” x 11⁄2”
JG314 - 91⁄2” x 11⁄2”
JG316 - 43⁄4” x 11⁄2”
JG317 - 61⁄4” x 11⁄2”
JG318 - 91⁄2” x 11⁄2”
Support for angled instruments
JG321 - 47⁄8” x 3⁄4”
JG325 - 61⁄4” x 11⁄8”
JG322 - 47⁄8” x 3⁄4”
JG361 - 65⁄8” x 2”
JG323 - 47⁄8” x 3⁄4”
PL962R
JG324 - 47⁄8” x 13⁄4”
PL962R
Trocar Storage Set
Universal silicone storage
racks for trocars
*For all “Type A” mounting items, fixation pins and screwdriver are required, see page 32
All items sold separately.
26
SEPARATING RACKS (Mounting Type A)*
JG358 - 43⁄4” x 11⁄2”
JG359 - 61⁄4” x 11⁄2”
JG360 - 91⁄2” x 11⁄2”
SMALL SILICONE HOLDERS (Mounting Type A)*
JG340 - 1⁄8” (5 mm)
JG341 - 1⁄4” (7.5 mm)
JG342 - 5⁄16” (8.5 mm)
JG343 - 3⁄8” (10 mm)
JG344 - 1⁄2” (12 mm)
METAL CLAMP WITH SILICONE INLAY (Mounting Type A)*
JG352R - 1⁄2” - 3⁄4” (15-20 mm)
JG353R - 3⁄4” - 11⁄8” (20-30 mm)
JG354R - 11⁄8” - 13⁄4” (30-45 mm)
FIXATION PINS FOR RING HANDLE INSTRUMENTS
Comes with nuts and screws for
mounting
JF346 - 1”, height 11⁄8”
Mounting Type A - built in - does not
require additional
fixation pins
JF343 - 1⁄4”, height 17⁄8”
*For all “Type A” mounting items, fixation pins and screwdriver are required, see page 32
All items sold separately.
27
Instrument Organization System
LARGE SILICONE HOLDERS (Mounting Type B)*
JG330 - 1⁄2” (15 mm)
JG332 - 11⁄8” (30 mm)
JG331 - 1” (20 mm)
JG301R mounting brackets
included
OPTICS HOLDERS (Mounting Type A)*
Eyepiece holder
JG367
Sleeve holder
Support for angled optics
JG368
JG369
FIXATION ELEMENTS
Fixation pin for Mounting Type A
Use JG302 Allen head screw driver to
mount
JG300 10 pins/pack
Fixation clamp for Mounting Type B
(JG330 - JG332)
JG301R 10 brackets
Screwdriver with an Allen head for use
with JG300, 3 mm head
JG302
TRAY INSERT (Mounting Type C)*
JF110R 10” x 73⁄4”
JF250R 12” x 10”
JF210R 171⁄4” x 10”
JF210R 171⁄4” x 10”
SILICONE RACK FOR TRAY INSERTS (Mounting Type C)*
To be used with tray
inserts JF110F &
JF210F
JG370 91⁄2” x 11⁄8”
28
*For all “Type A” mounting items, fixation pins and screwdriver are required, see page 32
All items sold separately.
BRACKETS FOR TRAY INSERTS (Mounting Type C)*
To be used with tray inserts
JF110F &
JF210F
To be used with tray inserts
JF110F &
JF210F
JG372 91⁄2” x 11⁄8”
JG371 91⁄2” x 11⁄8”
MICRO TRAYS WITH LID
JF149R
Mini tray can be mounted on a
perforated basket with
fixation pin type
A (JG300)
JF149R - Mini-Half Size Basket
5 3⁄8" x 4 3⁄4" x 1 7⁄8"
135 x 120 x 47 mm
Note: 2 Mini-Half Size Baskets fit
into 1 Mini Size
SterilContainer™
Mini tray can be mounted on a
perforated basket with
fixation pin type
A (JG300)
JF146R 33⁄8” x 13⁄4” x 1”
JF148R 53⁄4” x 13⁄4” x 1”
JF150R - Micro Instrument
Basket
with lid
9 1⁄4" x 53⁄8" x 15⁄8"
235 x 137 x 42 mm
JF150R
Mini tray can be mounted on a
perforated basket with
fixation pin type
A (JG300)
JF147R 14” x 13⁄4” x 1”
SILICONE MESH MATS & SILICONE HOLDING MATS WITH PERFORATIONS
JF938 - 9 1⁄2” x 9 7⁄8” (For use with half-size containers)
JF939 - 18 7⁄8” x 9 7⁄8”
JF940 - 15 7⁄8” x 9 7⁄8” (For use with three-quarter size containers)
JF941 - 21 1⁄8” x 9 7⁄8” (For use with full-size containers)
JF942 - 7 1⁄2” x 9 1⁄8” (For use with JF 110 R)
JF943 - 17” x 9 1⁄8” (For use with JF 210 R)
JF946 - 10 1⁄8” x 4 1⁄2” (For use with JF 159 R)
Perforated Silicone Holding Mats
JF944R - 93⁄4” x 4” Quarter-size silicone mats
JF945R - 93⁄4” x 10” Half-size silicone mats
JF947 - Three-Quarter size yellow silicone mat
JF949 - Full-Size yellow silicone mat
*For all “Type A” mounting items, fixation pins and screwdriver are required, see page 32
All items sold separately.
29
Instrument Organization System
SET EXAMPLES
JG308
JF148R
JG317
Tympanoplasty Set
JG308
JF110R
JG358
JF120R
JF346
JG330
Transsphenoidal
Hypophysectomy Set
JG312
30
PREASSEMBLED IOS BASKETS
MB071
MB071
Three-quarter sized custom
basket for microvascular
instruments
MB075
MB075
Full-size custom basket for
cystoscopes type 1
MB079
MB079
Full-size custom basket for
cardiac instruments
MB072
MB072
Extra-Long custom basket for
Extra-Long robot instruments
MB076
MB076
Full-size custom basket for
cystoscopes type 2
MB073
MB073
Full-size custom basket for
robot instruments
MB077
MB077
Full-size custom basket for
hand surgery
instruments
MB074
MB074
Full-size
custom
basket for robot
accessories
MB078
MB078
Three-quarter
sized custom
basket for eye surgery
instruments
MB080
MB080
Three-quarter sized
custom basket for curettes
31
Instrument Organization System
How to assemble
Mounting Type A
For instrument racks with fixation pin
Mounting Type A allows for easy top down
assembly of the majority of SterilContainer™
Storage System silicone dividers
1
1 Insert fixation pin JG300 in the rack.
Install rack with fixation pin in the tray.
2
2 Push the fixation pin down, then turn it
by 45° using JG302 - Allen screwdriver.
Mounting Type B
For silicone holders with fixation clamps
For use with
JG330, JG331
and JG332 only
1 Press fixation clamp JG301R into tray from
below.
2 Slide in silicone holder sideways.
2
1
Mounting Type C
For silicone racks in tray inserts
For use when inserting JG310
into JF110R and JF210R
1 Pull the silicone rack through the longitudinal
slots in the tray.
*Mounting Type C can only be used with JF110R and JF210R
baskets
1
32
Disposables
33
SterilContainer™ Processing Supplies
LOCKS
Tamperproof Locks Seal containers for safety and security. Indicator dots change color when exposed to sterilizing conditions.
Quantities of 1000 each.
US900 - Blue
US905 - Green
US906 - Orange
All Sterilization
No Indicator
EtO Sterilization Color
changes to Orange
Steam Sterilization
Color changes to
Brown
US990 Repair Tag
US910 - Pink
STERRAD®
Color changes to Blue,
Box of 1000
US399 — Locks
for vacuum flash
sterilization, Color
changes to Brown
COMMUNICATOR CARDS, BIOHAZARD CARDS, INDICATOR CARDS & INDICATOR STRIP
US991 —
US963 —
Communicator Card Biohazard Card
For use with US974
Communicator Tag.
Box of 500
For use with soiled
instruments.
Box of 250
MD346 —
Process Indicator
Card
MD347 —
Process Indicator
Card
For use with steam and
gas for SterilContainer
2000 and
SterilContainer S™.
Box of 250
For use in steam or gas
sterilization. Box of 250
MD399 — Indicator US754 - Indicator Strip
Single-use strip for use in steam and gas
card for vacuum
flash sterilization. sterilization. Box of 250
Indicators turn brown,
Box of 250
34
MD876 —
Quarter and Mini
Size Container
Indicator Card
Box of 250
MD334 —
STERRAD Indicator
Box of 250
(Non-Cellulous)
FILTERS - EXTRA-LONG, FULL-SIZE, THREE-QUARTER AND HALF-SIZE CONTAINERS
US751 — Single
use 7 1⁄2" diameter
filter with indicator
dot.
US994 — Single
MD344 — Single
JK090 — Reusable
use 7 1⁄2" diameter
filter.
use polypropylene
filters.
filter. 10 per pack
71⁄2” round
Box of 1000
Box of 1000
Box of 1000
FILTERS - QUARTER-SIZE CONTAINERS
US992 — Single
JK092 — Reusable
use 1⁄4- size
61⁄2" x 9" filter.
filter. 2 per pack
61⁄2” x 9”
Box of 1000
FILTERS - MINI AND EXTRA-LONG MINI SIZE CONTAINERS
US999 — Single
use mini-size
4" x 9" filter.
MD355 — Single
Use Polypropylene
Filter. 4” x 9”
JK091 — Reusable
filter. 2 per pack
4” x 9”
Box of 1000
FILTERS - GENERATION 2 AND PRIOR FULL, THREE-QUARTER AND HALF-SIZE CONTAINERS
US756 — Single use US998 — Single use JK089 — Reusable
square 9" x 9" filter
with indicator dot.
square 9" x 9" filter.
filter. 10 per pack
Box of 1000
9” x 9”
Box of 1000
35
SterilContainer™ Processing Supplies
PROCESS PACKAGES
36
Item No.
Item
# Sterilizations
Contents
MD325
For Perforated
Bottom Containers
Steam Accessories Set
1000
2 ea. US906 (orange locks/steam)
2 ea. US994 (round filter/no indicator dot)
4 ea. MD347 (indicator cards/steam or gas)
MD327
For Perforated
Bottom Containers
Steam Accessories Set
1000
2 ea. US906 (orange locks/steam)
2 ea. US998 (square filter/no indicator dot)
4 ea. MD347 (indicator cards/steam or gas)
MD328
For Perforated
Bottom Containers
EtO Accessories Set
1000
2 ea. US900 (blue locks/steam or gas)
2 ea. US994 (round filter/no indicator dot)
4 ea. MD347 (indicator cards/steam or gas)
MD329
For Perforated
Bottom Containers
EtO Accessories Set
1000
2 ea. US900 (blue locks/steam or gas)
2 ea. US751 (round filter with indicator dot)
4 ea. MD347 (indicator cards/steam or gas)
MD330
For Perforated
Bottom Containers
Steam Accessories Set
1000
2 ea. US906 (orange locks/steam)
2 ea. US751 (round filter with indicator dot)
4 ea. MD347 (indicator cards/steam or gas)
MD326
For Solid
Bottom Containers
Steam Accessories Set
1000
2 ea. US906 (orange locks/steam)
1 ea. US994 (round filter/no indicator dot)
4 ea. MD347 (indicator cards/steam or gas)
MD331
For Solid Bottom
Containers
Steam Accessories Set
1000
2 ea. US906 (orange locks/steam)
1 ea. US751 (round filter with indicator dot)
4 ea. MD347 (indicator cards/steam or gas)
MB901
PrimeLine® Process Packs
1000
2 ea. US906 - (orange locks/steam)
4 packs of MD346 - (Indicator cards/steam)
MB902
SterilContainer S™ full size
Process Pack
500
1 ea. US910 – (pink locks/STERRAD®)
2 ea. MD334 – (STERRAD compatible indicator cards)
2 ea. MD344 – (polypropylene filters/STERRAD)
MB903
SterilContainer S
(3⁄4 and 1⁄2 sized containers)
Process Pack
500
1 ea. US910 – (pink locks/steam)
2 ea. MD334 – (STERRAD compatible indicator cards)
1 ea. MD344 – (polypropylene filters/STERRAD)
General Accessories
37
Identification Labels, Tags, Stringers & Clamps
JG787U
JG
79
4U
JG
78
5U
IDENTIFICATION LABELS FOR LABELING CONTENTS AND DELIVERY ADDRESS
JG790U
JG786U
2U
79
JG
JG
78
8U
JG793U
JG785U
JG786U
JG787U
JG788U
JG790U
JG792U
JG793U
JG794U
Red
Blue
Green
Gold
Black
Brown
Purple
Orange
Not recommended for use in STERRAD® due to color fading.
SNAP-ON IDENTIFICATION TAGS FOR LABELING CONTENTS
2 3⁄8" x 1⁄2" (60 x 15 mm)
Small Tags
US935
US936
US937
US938
US939
US940
US941
US942
US943
Red
Blue
Green
Gold
Silver
Black
Purple
Orange
Bronze
US965
US966
US967
US968
US969
US970
US971
US972
US973
Red
Blue
Green
Gold
Silver
Black
Purple
Orange
Bronze
US938
US972
US942
US969
US941
US971
US937
US965
US939
US970
US940
2 3⁄8" x 11⁄8" (60 x 30 mm)
Large Tags
US966
US935
US968
US936
US943
US967
US973
To order this tag without clips add the suffix “200” behind the item #’s (example US935200 is the red small tag only)
Not recommended for use in STERRAD due to color fading.
COMMUNICATOR TAG
US974 Communication Card Holder including Clip
(Shown with US963 Communicator Card not included)
Clip only - MD353
38
STRINGERS
Open Stringers
US810
US897
US898
US899
US811
US813
US812
14" x 21⁄2"
12" x 21⁄2"
10" x 21⁄2"
8" x 21⁄2"
6" x 21⁄2"
8" x 5"
6" x 5"
Closed Stringers
Push to Open
US891
US890
US889
US888
US926
US814
US909
US925
US904
US815
14" x 21⁄2"
12" x 21⁄2"
10" x 21⁄2"
8" x 21⁄2"
6" x 21⁄2"
4" x 21⁄2"
12" x 5"
10" x 5"
8" x 5"
6" x 5"
2
All dimensions are from outside edge to
outside edge
1
Pull to
Open
Closed
CLAMPS AND CLAMP RACKS
JG675U
Clamps, in pairs, for marking removal
containers or used instrument sets.
(Qty = 2)
JG690R
Rack, for clamps JG675U
39
Instrument Holders and Holding Pins
For additional organization items, please refer to the Instrument Organization System on page 23
INSTRUMENT HOLDERS
JF377
Plastic Instrument Rack
with Holding Pins
5 3⁄4" x 1" x 1"
147 x 25 x 26 mm
ME151
Half Size 6 Multi-keyhole
Bracket
5" x 3⁄8" x 11⁄2"
127 x 9 x 38 mm
ME160
Single 10 mm Keyhole
Bracket
11⁄2" x 3⁄8" x 1"
38 x 9 x 26 mm
All dimensions are length x width x height
40
JF388
Plastic Instrument Rack,
Complete with Holding Pins
2 3⁄4" x 1" x 1"
69 x 25 x 26 mm
ME154
Single 5 mm Keyhole
Bracket
11⁄2" x 3⁄8" x 11⁄2"
38 x 9 x 38 mm
ME161
V-Bar Cushioning Bar - for
use with Basket Lid
95⁄8" x 5⁄8" x 3⁄4"
245 x 17 x 18 mm
JF379
Silicone Cushioning Rack
5 7⁄8" x 3⁄4" x 5⁄8"
148 x 19 x 16 mm
ME156
Single 5 mm Keyhole
Bracket
11⁄2" x 3⁄8" x 1"
38 x 9 x 26 mm
ME150
Full Size 14 Multi-keyhole
Bracket
91⁄4" x 3⁄8" x 11⁄2"
236 x 9 x 38 mm
ME158
Single 10 mm Keyhole
Bracket
11⁄2" x 3⁄8" x 11⁄2"
38 x 9 x 38 mm
For additional organization items, please refer to the Instrument Organization System on page 23
INSTRUMENT HOLDERS
MB216
MB217
MB218
MB219
MB220
Item No. Description
MB216
Holding Clamp I clamping capacity: 7-12 mm dia.
MB217
Holding Clamp II clamping capacity: 12-16 mm dia.
MB218
Holding Clamp III clamping capacity: 16-26 mm dia.
MB219
Holding Clamp IV clamping capacity: 16-36 mm dia.
MB220
Holding Clamp V clamping capacity: 36-45 mm dia.
HOLDING PINS
JF346
US928
US929
US931
US930
*Holding Clamps and Holding Pins are compatible
with both wire mesh perforated baskets.
Item No.
JF346
US928
US929
US931
US930
Description
Holding Pin for Ring-Handled Instruments
Holding Pin
Holding Pin
Holding Pin
Holding Pin
Dimensions
1" dia. x 1 1⁄8" height
1 1⁄4" height
1 3⁄4" height
2 1⁄4" height
3 1⁄2" height
25 mm dia. x 29 mm height
28 mm height
45 mm height
56 mm height
90 mm height
41
Endoscopy Storage Accessories
ENDOSCOPY STORAGE ACCESSORIES: SCOPE TRAYS AND BASKETS
JF431R
JF431R - Single Scope Tray
17 7⁄8" x 3 3⁄8" x 1 5⁄8"
454 x 84 x 41 mm
JF434R
JF434R - Single Scope Tray with
Silicone Rack
17 7⁄8" x 4 1⁄16" x 1 5⁄8"
454 x 104 x 41 mm
JF432R
JF432R - Double Scope Tray
17 7⁄8" x 4 1⁄16" x 1 5⁄8"
454 x 104 x 41 mm
JF436R
JF436R - Single Scope Tray
(fits inside 1⁄4 size JN094)
10 3⁄4" x 3 3⁄8" x 1 5⁄8"
273 x 84 x 41 mm
JF433R
JF433R - Double Scope Tray with
Silicone Supports
17 7⁄8" x 4 1⁄16" x 1 5⁄8"
454 x 104 x 41 mm
MD323
MD322 - Two Scope Basket
full size (not shown — see MD323)
21 1⁄4" x 10" x 2"
540 x 254 x 50 mm
MD323 - Three Scope Basket
full size (shown)
21 1⁄4" x 10" x 2"
540 x 254 x 50 mm
MD324 - Four Scope Basket
full size (not shown — see MD323)
21 1⁄4" x 10" x 2 "
540 x 254 x 50 mm
JF435R
JF435R - Scope Basket with Lid
(fits into Extra-Long Mini Container)
20" x 51⁄4" x 1 3⁄4"
508 x 133 x 44 mm
All dimensions are length x width x height
42
ENDORACK STORAGE SYSTEM FOR MIS INSTRUMENTS
PL960R
PL960R
Endorack Full-Size,
Perforated basket and
silicone mesh mat, fits into
8” height, Full-Size
SterilContainer™
PL962R
PL962R
Trocar Storage Set
Universal silicone storage
racks for trocars
PL963R
PL961R
PL961R
Endorack Extra-Long,
perforated basket and
silicone mesh mat, for
instruments with shaft-length
up to 42 cm, fits into JN445
PL963R
Endorack Full-Size,
fits into 8” height, Full-Size
SterilContainer
PL964R
PL964R
Endorack Extra-Long, fits into
8” height, Extra-Long
SterilContainer
PL960206
PL960206
Silicone Component
ENDOSCOPY RACK- FOR FULL-SIZE CONTAINERS
MD377 - Endorack™ Storage Rack Only
Holds 14 endoscopic instruments
MD378 - Endorack Storage System
With silicone mat and full-size 2" wire mesh basket
Holds 14 endoscopic instruments
Fits into a full-size, 8" deep SterilContainer
MD378
43
Instrument Storage Racks
RACKS
MD365
MD365 - Arthroscopy Rack
Holds 20 arthroscopy punches
Fits into a full-size, 8" deep
SterilContainer™
19 3⁄8" x 9 3⁄8" x 4 1⁄2"
490 x 238 x 114 mm
MD928
MD928 - Cobb Curette Rack
Holds 10 Cobb curettes
(example: FK581 - FK599R)
9" x 2 1⁄2" x 14"
230 x 65 x 355 mm
44
MD927
MD927 - Osteotome Rack for
Three-Quarter Size Container
Holds 12 straight and curved osteotomes
(example: MB640 and MB650)
11 1⁄2" x 9 1⁄2" x 2 3⁄4"
295 x 240 x 70 mm
MD929
MD929 - Bruns Curette Rack
Holds 10 Bruns curettes
(example: MD473 - MD490)
9" x 2 1⁄2" x 11 1⁄2"
230 x 65 x 295 mm
MD937
MD937 - Osteotome Rack for
Half-Size Container
Holds 12 straight and curved osteotomes
(example: MB640 and MB650)
10" x 97⁄8" x 23⁄4"
254 x 250 x 70 mm
=.
STORAGE FRAME FOR BONE PUNCHES
JF120R 91⁄2” x 87⁄8” x 63⁄8”
JF120R holds ten instruments.
Instrument Set Example
JF120R can be used in the JN744, 8”
three-quarter size container. It can also
be used in a full-size container for
longer instruments.
LIFTING PLATFORMS
MD264
MD264
Fits into full-size 10” container.
Height = 63⁄4"
MD301
MD301
Fits into full-size 6” container JN/JK442
with handle folded 90°. Fits into full-size
10” container JN/JK446 with handles
extended.
63⁄4” tall with handles extended vertically
All dimensions are length x width x height
45
Basket Dividers
BASKET DIVIDERS
JF378R
US975
Item No.
JF378R
JF381R
JF921R
JF922R
JF923R
US975
US976
US977
US978
46
JF381R
US976
Description
Limiting Bar with Securing Screws
Limiting Bar with Securing Screws
Straight divider for baskets
Straight divider for baskets
Straight divider for baskets
Straight divider for baskets
Straight divider for baskets
Corner divider for baskets
Corner divider for baskets
JF921R
US977
JF922R
US978
JF923R
Note: Use Holding
Pins shown on
page 41 to secure
US975, 976, 977, 978
Basket Dividers
Outside Dimensions (length x width x height)
6 1⁄2" x 1 1⁄16" x 1⁄2"
164 x 27 x 12 mm
1
1
3" x 1 ⁄16" x ⁄2"
76 x 27 x 12 mm
4 3⁄8" x 5⁄8" x 1 1⁄16"
110 x 15 x 28 mm
6 3⁄8" x 5⁄8" x 1 1⁄16"
174 x 15 x 28 mm
5
5
1
9 ⁄8" x ⁄8" x 1 ⁄16"
244 x 15 x 28 mm
9 1⁄2" x 1 1⁄2"
240 x 40 mm
1
9 ⁄2" x 3"
240 x 75 mm
4" x 4" x 1"
100 x 100 x 25 mm
4 3⁄4" x 4 3⁄4" x 3"
120 x 120 x 75 mm
BASKET DIVIDERS
Item No.
JF905
JF906R
JF907R
JF908R
JF909R
JF715R
JF905
JF906R
JF907R
JF908R
JF909R
JF715R
Description
Divider to be used on sliding rails JF906R and JF907R
Sliding rails with securing screws, for divider JF905
Limiting bars with securing screws, particularly useful for storing dilators
Spiral holding device with two fixing screws and knurled nuts for wire baskets or wire bases
47
Micro Instrument Holders and Racks
MICRO INSTRUMENT HOLDERS AND RACKS
FM665R - Micro Instrument Storage Rack 3⁄4 XS
Fits into a three-quarter size, 4" deep SterilContainer™
FM665R
JF149R
JF149R - Mini-Half Size Basket
5 3⁄8" x 4 3⁄4" x 1 7⁄8"
135 x 120 x 47 mm
Note: 2 Mini-Half Size Baskets fit into
one Mini Size SterilContainer
All dimensions are length x width x height
48
JF150R
JF150R - Micro Instrument basket
with lid
9 1⁄4" x 5 1⁄4" x 1 5⁄8"
235 x 137 x 42 mm
MICRO INSTRUMENT HOLDERS AND RACKS
JG698R
JG697R
Item No.
Description
JG697R
Tiltable holding device for six instruments,
perfect for burr, drills, gimlets, screw drivers, etc.
JG698R
Tiltable holding device for 12 instruments
FD465R
FD470R
FD480R
FD465R, FD470R, FD475R, and FD480R are designed so that retention does not occur until instruments are
lowered into lock position. Spring retention can be easily adjusted.
Item No.
Description
FD465R
Micro instrument holder for 12 instruments, up to 7 1⁄3" long, (185 mm).
FD470R
Micro instrument holder for seven instruments (non-expandable).
FD475R
Micro instrument holder for seven instruments (expandable). Extends to 11" long, (280 mm).
FD480R
Micro instrument holder for seven instruments (expandable).
1 1⁄2" high (40 mm), for bayonet instruments. Extends to 11" long, (280 mm).
(not shown)
8 3⁄4" x 47⁄8" x 1"
8 3⁄4" x 5" x 1"
(222 x 127 x 25 mm)
(222 x 124 x 25 mm)
49
Micro Trays
MICRO TRAYS
US953
Item No. Description
Outside Dimensions (length x width x height)
US948
8” x 8” x 1 1⁄4"
US949
US952
US953
Micro Tray
Micro Tray
Micro Tray
Micro Tray
1
8" x 12" x 1 ⁄4"
203 x 203 x 32 mm
203 x 305 x 32 mm
1
254 x 254 x 32 mm
1
273 x 385 x 32 mm
10" x 10" x 1 ⁄4"
11" x 15" x 1 ⁄4"
US948
MICRO TRAYS - CLIP BOX
Item No. Description
Outside Dimensions (length x width x height)
US956
4" x 6" x 5⁄8"
US957
Clip Box
Clip Box
7
5" x 7" x ⁄8"
102 x 153 x 17 mm
127 x 178 x 17 mm
US957
50
TLC MICRO TRAYS
Item No. Description
US961
Outside Dimensions (length x width x height)
TLC Micro Instrument Tray 9 1⁄2" x 15" x 7⁄8"
241 x 381 x 22 mm
US961
51
Mats, Lubricants and Cleaners
SILICONE MESH MATS
JF938 - 9 1⁄2” x 9 7⁄8” (For use with half-size containers)
JF939 - 18 7⁄8” x 9 7⁄8”
JF940 - 15 7⁄8” x 9 7⁄8” (For use with three-quarter size containers)
JF941 - 21 1⁄8” x 9 7⁄8” (For use with full-size containers)
JF942 - 7 1⁄2” x 9 1⁄8” (For use with JF 110 R)
JF943 - 17” x 9 1⁄8” (For use with JF 210 R)
JF946 - 10 1⁄8” x 4 1⁄2” (For use with JF 159 R)
SILICONE CUSHIONING PADS
MD894 Mini-size
Silicone Cushioning Pad
43⁄8” x 9 7⁄8"
110 x 250 mm
MD895 Quarter-size
Silicone Cushioning Pad
6 1⁄2” x 10 1⁄4"
165 x 260 mm
MD896 Half-size
Silicone Cushioning Pad
9 1⁄2” x 9 7⁄8"
240 x 250 mm
JF933 Extra Long-size Silicone
Cushioning Pad
24" x 9" x 1 7⁄8”
610 x 230 x 30 mm
JF933
All dimensions are length x width x height
52
• For safe storage of delicate instruments.
• Pad elevators to minimize potential
moisture buildup.
• Perforated for optimal air and steam
circulation.
MD897 Three-quarter-size
Silicone Cushioning Pad
15 3⁄4” x 9 7⁄8"
400 x 250 mm
MD898 Full-size
Silicone Cushioning Pad
21 1⁄4” x 9 7⁄8"
540 x 250 mm
SILICONE HOLDING MATS WITH PERFORATIONS
JF944R - 93⁄4” x 4” Quarter-size silicone mats
JF945R - 93⁄4” x 10” Half-size silicone mats
JF947 - Three-Quarter size yellow silicone mat
JF949 - Full-Size yellow silicone mat
LUBRICANTS AND CLEANERS
JG598
JG598
Aesculap Instrument Oil for box locks,
ratchets, etc.
Physiologically inert acc. to DAB 7.
JG600
JG600
Aesculap Oil Spray for maintenance of
instruments prior to sterilization.
Physiologically inert acc. to DAB 7.
Sold in quantities of 6.
JG601
JG601
Eloxal Cleaner, 100 ml for cleaning
container surfaces.
53
Storage and Transport
STORAGE RACKS AND CARTS
MD266
MD266
SterilContainer™ Carrier Bracket
MD265
MD262
MD262 - Storage Rack
54" (W) x 24" (D) x 76 9⁄16" (H)
• Holds up to six MD265 Carriers.
(Carriers sold separately).
• Wheels with brakes
54
MD265
SterilContainer Carrier
16" (W) x 24" (D) x 28" (H)
406 (W) x 610 (D) x 711 mm (H)
(Qty = 1)
• Adapts to most existing hospital
shelving
• Comes with four MD266 adjustable
brackets
STORAGE RACKS AND CARTS
JF803 Open Storage Cart
40" (W) x 24" (D) x 48" (H)
1016 (W) x 610 (D) x 1219 mm (H)
• Mobile shelf unit for transport and storage
• Two wheels with brakes
• One section for containers max. 11" (280 mm)
high
• Two sections for containers max. 6 1⁄2" (165 mm)
high
JF900 Cabinet Cart
43" (W) x 27" (D) x 51" (H)
1019 (W) x 686 (D) x 1295 mm (H)
• Dust-proof sliding doors for
contamination-free transport and storage
• Two wheels with brakes
• One section for containers max. 11" (280 mm)
high
• Two sections for containers max. 6 1⁄2" (165 mm)
high
JF901 Cabinet Cart
30" (W) x 27" (D) x 51" (H)
762 (W) x 686 (D) x 1295 mm (H)
• Dust-proof sliding doors for
contamination-free transport and storage
• Two wheels with brakes
• 1 section for containers max. 11" (280 mm) high
• 1 section for containers max. 6 1⁄2" (165 mm) high
JF791R Trolley Storage Unit Telescoping Shelf
11 3⁄8" (W) x 22 1⁄2" (D) x 5⁄8" (H)
289 (W) x 571 (D) x 16 mm (H)
• For carts JF803, JF900 and JF901
55
Storage and Transport
STORAGE RACKS AND CARTS
US250
JF793
US250 Cabinet Cart
45 1⁄2" (W) x 28 1⁄2" (D) x 27 1⁄2" (H)
1156 (W) x 724 (D) x 699 mm (H)
JF902 Transport Cart
43" (W) x 23 1⁄2" (D) x 49" (H)
1092 (W) x 597 (D) x 1245 mm (H)
JF793 Transport Cart
24" (W) x 13 1⁄2" (D) x 46 1⁄2" (H)
610 (W) x 343 (D) x 1181 mm (H)
• Two wheels with brakes
• Available with pull-out shelves as
special order
• For storage and transport
• For containers up to 11" (280 mm) high
• For transport and storage
• One section for containers max.
11" (280 mm) high
• Three sections for containers max.
6" (155 mm) high
JF903
56
JF902
JF820
JF903 Cabinet Cart
43" (W) x 27" (D) x 51" (H)
1092 (W) x 686 (D) x 1295 mm (H)
JF820 SAFETransport™ Cart
30" (W) x 15 1⁄2" (D) x 35 1⁄2" (H)
762 (W) x 394 (D) x 902 mm (H)
• Dust-proof sliding doors for
contamination-free transport and
storage
• Two wheels with brakes
• For containers up to 11" (280 mm) high
• Two wheels with brakes
JG685
JG685 Cart Cover
• For carts JF803, JF900 and JF903
• Zipper and snaps for easy removal and
installation
STORAGE RACKS AND CARTS
MD263
Container Wash Rack
49" (W) x 26" (D) x 67" (H)
• Includes five shelves and six lid dividers
MD299
Lid Divider for MD263
MD298
Shelves for MD263
MD263
Note: Please review mechanical washer spigot placement to ensure compatibility of container wash rack.
PREPARATION TABLES
JF890R
JF890R
Sterile Preparation Table for Containers
27" (W) x 27" (D) x 31 1⁄2" (H)
686 (W) x 686 (D) x 800 mm (H)
JF889R
JF889R
Sterile Preparation Table for Containers
27" (W) x 16 1⁄2" (D) x 31 1⁄2" (H)
686 (W) x 419 (D) x 800 mm (H)
• Mobile, two wheels equipped with brakes • Mobile, two wheels equipped with brakes
57
Storage and Transport
PORTABLE RACK
JF950
Portable Rack for Mini-Sized Containers
13" (W) x 13" (D) x 5 3⁄4" (H)
330 (W) x 330 (D) x 146 mm (H)
• Adjustable holding frames
• Compatible Allen wrench included
JF952
Support bracket for JF950
JF954
Allen wrench
JF950
JF953
Wall bracket for JF950
CONTAINER LIFT
JL903
Container Lift
25" (W) x 42" (D) x 81" (H)
635 (W) x 1,067 (D) x 2,057 mm (H)
• Lifting capacity height: 70" (1,778 mm)
• Weight of system: 95 lb.
• Carrying power: max 154 lb.
• Loading platform: 25" x 25" (635 x 635 mm)
• Battery voltage: 24 volt
• Battery capacity: 6.5 Ah
• Mains voltage charger: 120-240 V, 50–60 Hz
TE740
Power Cord for Container Lift (JL903)
JL903
58
Display Boards &
Instrument Holders
INSTRUMENT DISPLAY BOARD
US872
Instrument Display Board only
34" x 34", Aluminum
864 x 864 mm
Picture shown with US863 Instrument Pegs, US862 Instrument Sleeves, US866 Curette
Holder, US865 Slotted Holder and various sized trays.
US867
Dust Cover
US872
INSTRUMENT HOLDERS AND BOARD TRAYS
Item No.
Description
US865
Slotted Holder, 5" (127 mm)
US866
Curette Holder, 5" (127 mm) holds five curettes
US869
Instrument Board Tray, 11" (279 mm)
US870
Instrument Board Tray, 7" (178 mm)
For pictures of surgical instruments, please contact your local Aesculap Representative
at 800-282-9000
INSTRUMENT PEG
US862
Instrument Sleeves
24/Pack
US863
Instrument Peg
6" (152 mm) (Qty = 1)
59
Miscellaneous
METAL SPONGE BOWL
US060
US060 - Metal Sponge Bowl
1 1⁄2-quart capacity
US063
US063 - Metal Iodine Cup
6 oz.
US066
US066 - Medicine Cup
2 oz.
JG506R
JG506R - Kidney Basin
10"
60
US061
US061 - Metal Sponge Bowl
1-quart capacity
US064
US064 - Metal Graduated Measure
32 oz.
US067
US067 - Solution Basin
12 oz.
US062
US062 - Metal Sponge Bowl
1 7⁄8-quart capacity
US065
US065 - Metal Iodine Cup
14 oz.
JG504R
JG504R - Kidney Basin
6 3⁄4", 250 ml
SterilContainer™ REPLACEMENT PARTS
JK100
JK100 — Filter retainer
For use with lids and perforated
container bottoms.
JP055
JP055 — Mounting handle for filter
insert, PrimeLine lids
JP001204
JP001204 — Filter cover for PrimeLine
JK098
JK098 — Mini filter retainer
JK086
JK086 — Marking pen for PrimeLine
JP050
JP050 — Filter for PrimeLine® lids
JF112210
JF112210 — Replacement feet for
perforated basket
JP001202
JP001202 — Outside cover for
PrimeLine
61
BIO-BIN™ Containers
BIO-BIN CONTAINERS
The stainless steel BIO-BIN container is for transportation
of soiled instruments and supplies within the hospital, to
prevent cross contamination. Meets OSHA standards.
JK262R
BIO-BIN Full-Size, Stainless Steel Bottom
23” x 11” x 6”
586 x 280 x 150 mm
JK262R
JK268R
JK268R
BIO-BIN Full-Size, Stainless Steel Lid
23” x 11” x 1 1⁄2”
586 x 280 x 36 mm
JK060R
BIO-BIN Half-Size, Stainless Steel Bottom
11 5⁄8” x 11” x 4”
295 x 280 x 102 mm
JK060R
JK067R
JK067R
BIO-BIN Half-Size, Stainless Steel Lid
11 5⁄8” x 11” x 1 1⁄2”
295 x 280 x 36 mm
JK062R
JK068R
JK062R
BIO-BIN Half-Size, Stainless Steel Bottom
11 5⁄8” x 11” x 6”
295 x 280 x 150 mm
JK068R
BIO-BIN Half-Size, Stainless Steel Lid
11 5⁄8” x 11” x 1 1⁄2”
295 x 280 x 36 mm
All dimensions are length x width x height
62
63
Example Instrument Set Sizing Guide
64
CONTAINER
SET NAME
CONTAINER
SIZE
BASKET
SIZE
CONTAINER
SET NAME
CONTAINER
SIZE
BASKET
SIZE
Abdominal Hyst. Set, Complete
Abdominal Hysterectomy Set
Abdominal Hyst. Set (Added to
Major Instrument Set)
Adenoid Curette Set
Adult Circumcision Set
Amputate Supplement (Added to
Basic Set)
Arthroscopy
Arthroscopy, Complete
Arthroscopy, Cut Down
Arthroscopy, Scope
Bankhart Instrument Set, Complete
Basic Hip, Complete
Basic Hip
Biopsy Set
Bookwalter Retractor
Breast Augmentation
Breast BX
Breast Reconstruction
Brown Dermatome
Burr Hole Set
C-Section Set, Complete
Caldwell Luc., Complete
Caldwell Luc. (Added to SMR)
Carotid Supplement
Chest Set
Cholangiogram
Circumcision Set
Cleft Palate Instruments
Cloward Retractor
Coronary Instruments
Craniotomy Set, Medium
Craniotomy Set, Large
Crutchfield Tong Set
Cysto/TURP Set
D & C Tray, Complete
D & C Partial
Dissection Set
Full, 51⁄3"
Half, 51⁄3"
3"
3"
3
Half, 51⁄3"
Mini
Half, 4"
3"
Mini
2"
Half, 51⁄3"
3
⁄4, 6"
3
⁄4, 6"
Half, 51⁄3"
3
⁄4, 51⁄3"
3
⁄4, 51⁄3"
Full, 6"
3
⁄4, 51⁄3"
Half, 51⁄3"
Wide Body, 4"
3
⁄4, 51⁄3"
Half, 51⁄3"
Half, 51⁄3"
Half, 51⁄3"
3
⁄4, 51⁄3"
Full, 51⁄3"
Full, 6"
Half, 51⁄3"
Half, 51⁄3"
Full, 6"
Half, 4"
Quarter, 21⁄2"
Half, 4"
Half, 51⁄3"
Half, 4"
Full, 6"
Wide Body, 7"
3
⁄4, 4"
3
⁄4, 51⁄3"
3
⁄4, 51⁄3"
Half, 51⁄3"
3
⁄4, 51⁄3"
3"
Two 2"
Two 2"
3"
1" & 2"
3"
4"
3"
3"
4"
3"
3"
3"
3"
3"
3"
Two 2"
3"
3"
4"
2"
11⁄2"
2"
3"
2"
4"
4" & 2"
2"
3"
3"
3"
3"
Dionic Shaver
Drills
Ear Forceps/Scissors
Ear Instrument Tray
Ear Picks
Extra Long/ Deep
Facial Fracture Set
Fusion Supplement (Added to Lami.)
Gall Bladder Instruments
G.I. Resection Set
(Added to Major Instrument Set)
Gomco Circumcision Set
Hall Drills
Hall Neurairtome
Hall Osteotome
Hand Set Basic
Hand Set, Minor
Hand Bone Instrument
(Added to Hand Basic)
Harrington Rod Instruments/
Implants
Heifetz Cup Tray
Hemorrhoid Rectal
(Added to Minor)
Hemmorroidectomy Tray
Hip Instruments
(Added to Basic Ortho)
Hip Pinning (Added to Basic Ortho)
Hudson Brace Set
I & D Tray
Iliac Graft Set
IMR Instruments
Intestinal Set
Janetta Fossa Retractor
Kidney Instrument Set
Kidney Transplant Donor, Complete
Kidney Transplant Recipient,
Complete
Knee Arthrotomy Set
⁄4, 51⁄3"
⁄4, 51⁄8"
Half, 51⁄3"
Full, 6"
Quarter, 5"
3
⁄4, 51⁄3"
3
⁄4, 51⁄3"
3
⁄4, 51⁄3"
Half, 51⁄3"
3"
3"
3"
Two 2"
Three 11⁄2"
3"
3"
3"
3"
3
⁄4, 51⁄3"
Half, 4"
Half, 51⁄3"
Half, 51⁄3"
Half, 4"
Full, 6"
Half, 6"
3
2"
3"
3"
2"
Two 2"
Two 2"
3
2"
3
⁄4, 4"
Wide Body, 7" 4 & 2"
⁄4, 51⁄3"
2 & 1"
3
Half, 51⁄3"
Half, 6"
3"
4"
3
⁄4, 51⁄3"
3
⁄4, 51⁄3"
Half, 4"
Quarter, 21⁄2"
Half, 6"
Half, 4"
3
⁄4, 51⁄3"
Half, 4"
Half, 4"
Full, 51⁄3"
3"
3"
2"
11⁄2"
4"
2"
3"
2"
2"
3"
Full, 51⁄3"
3
⁄4, 51⁄3"
3"
3"
CONTAINER
SET NAME
CONTAINER
SIZE
BASKET
SIZE
CONTAINER
SET NAME
Laminectomy Instrument Set
Lap/Chole, Cut Down
Lap/Chole, Instruments
Laparoscopy
Laparoscopy Cut Down
Laryngoscopy
Long Instrument Pan
Major Instrument Set
Major Ortho Set
Major Vascular/ADB Vascular
Major Vascular/ABD Vascular
(Add to Major)
Major Vascular Instrument Set
Mastoid Tympanoplasty, Cut-Down
Meatotomy Set
Mediastinoscopy Tray
Micro-Discectomy
Micro-Laryngoscopy
Minor Instrument Set
Minor Ortho Set
Myringotomy Instrument Set
Nasal Local Tray
Nasal Polyp (Add to SMR)
Neck Dissection (Add to Basic Set)
Neck Dissection Set, Complete
Nerve Instrument Set
(Add to Hand Basic)
Newborn Circumcision Set
N.S.R. Tray
Omni Retractor
Open Heart Basic Tray
Ortho Basic
Ortho Small Bone
Osteotomes /Chisels (w/Accessories)
Pacemaker Tray
Pediatric Laparotomy
Peripheral Vascular Tray
Peripheral Vascular/Minor Vascular
Full, 6"
Half, 51⁄3"
Full, 6"
Full, 6"
Half, 51⁄3"
3
⁄4, 4"
3
⁄4, 51⁄3"
Full, 6"
Full, 6"
Full, 6"
Two 2"
3"
Two 2"
Two, 2"
3"
2"
3"
4"
Two 2"
4"
3
⁄4, 51⁄3"
3
⁄4, 6"
1
⁄4, 51⁄3"
Mini
3
⁄4, 4"
3
⁄4, 51⁄3"
3
⁄4, 4"
3
⁄4, 51⁄3"
3
⁄4, 51⁄3"
Quarter, 21⁄2"
Mini
Half, 51⁄3"
Half, 51⁄3"
Full, 51⁄3"
3"
4"
3"
Mini
2"
3"
2"
3"
3"
11⁄2"
Mini
3"
3"
3"
3
2"
Mini
3"
4"
Two 3"
4"
3"
3"
3"
2"
4"
3"
Peripheral Vascular/Minor Vascular,
Complete
Plastic Instrument Set
Podiatry instrument Set
Proctoscope Set
Prostate Instruments
Radical Supplement
Rectal Set, Complete
Rhinoplasty Set
Rhinoplasty Set (Added to SMR)
Rib Resection Set
Scoville Retractor Set
Sinus Set
Sinuscopy Set
SMR Set
SMR Set, Complete
Sternal Saw
Tendon Instrument Set
(Add to Hand Basic)
Thoracoscopy Instruments
Thoracotomy Set
Thoracotomy Set, Supplement
(Add to Major)"
Thyroid Supplement
Thyroidectomy, Complete
Thyroidectomy Set
T & A Instruments
TMJ Arthrotomy Set
Total Hip Set
Total Knee Set
Tracheotomy Tray
Tuboplasty Micro Set
Upper Hand Retractor
Vaginal Hyst. Set
Vaginal Hyst. Set, Supplement
(Add to D&C)
Valve Instruments
Vascular Access/AV Fistula
Vasectomy Set
⁄4, 4"
Mini
3
⁄4, 51⁄3"
Wide Body, 7"
(2) Full, 51⁄3"
Full, 6"
3
⁄4, 51⁄3"
3
⁄4, 51⁄3"
3
⁄4, 51⁄3"
3
⁄4, 4"
3
⁄4, 6"
3
⁄4, 51⁄3"
CONTAINER
SIZE
BASKET
SIZE
Full, 51⁄3"
Half, 51⁄3"
Half 6"
Full, 4"
Half, 4"
Half, 51⁄3"
3
⁄4, 51⁄3"
3
⁄4, 6"
3
⁄4, 6"
3
⁄4, 51⁄3"
Half, 51⁄3"
3
⁄4, 51⁄3"
3
⁄4, 6"
Full, 6"
Full, 6"
Half, 51⁄3"
3"
3"
4"
2"
2"
3"
3"
3 & 1"
3"
3"
3"
3"
3 & 1"
3 & 1"
3"
3"
Half, 4"
Full, 6"
Full, 6"
2"
Two 2"
4"
3
⁄4, 51⁄3"
Half, 51⁄3"
3
⁄4, 51⁄3"
3
⁄4, 51⁄3"
3
⁄4, 4"
Half, 51⁄3"
Full, 51⁄3"
Full, 51⁄3"
3
⁄4, 51⁄3"
Mini
Wide Body, 7"
3
⁄4, 51⁄3"
3"
3"
3"
3"
2"
3"
3"
3"
3"
Mini
4"
3"
Half, 51⁄3"
Half, 4"
3
⁄4, 51⁄3"
3
⁄4, 51⁄3"
3"
2"
3"
3"
65
SterilContainer™ Product Dimensions
FULL-SIZE CONTAINERS
Length x Width x Height (Inches and mm)
JN440
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 31⁄2
Inside Dimension
JN441
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 43⁄4
Inside Dimension
JN442
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 51⁄4
Inside Dimension
JN444
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 73⁄8
Inside Dimension
JN446
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 93⁄4
Inside Dimension
JK440
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 31⁄2
Inside Dimension
JK441
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 43⁄4
Inside Dimension
JK442
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 51⁄4
Inside Dimension
JK444
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 73⁄8
Inside Dimension
JK446
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 93⁄4
Inside Dimension
66
mm
592 x 274 x 90
mm
592 x 274 x 120
mm
592 x 274 x 135
mm
592 x 274 x 187
mm
592 x 274 x 247
mm
592 x 274 x 90
mm
592 x 274 x 120
mm
592 x 274 x 135
mm
592 x 274 x 187
mm
592 x 274 x 247
Length x Width x Height (Inches and mm)
Bottom and Aluminum Lid
Inches
mm
231⁄4 x 111⁄4 x 41⁄4
592 x 285 x 108
211⁄2 x 101⁄8 x 21⁄2
544 x 258 x 63
Bottom and Aluminum Lid
Inches
mm
231⁄4 x 111⁄4 x 51⁄2
592 x 285 x 138
211⁄2 x 101⁄8 x 35⁄8
544 x 258 x 93
Bottom and Aluminum Lid
Inches
mm
1
1
23 ⁄4 x 11 ⁄4 x 6
592 x 285 x 153
1
1
1
21 ⁄2 x 10 ⁄8 x 4 ⁄4
544 x 258 x 108
Bottom and Aluminum Lid
Inches
mm
1
1
23 ⁄4 x 11 ⁄4 x 8
592 x 285 x 205
211⁄2 x 101⁄8 x 61⁄4
544 x 258 x 160
Bottom and Aluminum Lid
Inches
mm
231⁄4 x 111⁄4 x 101⁄2
592 x 285 x 265
211⁄2 x 101⁄8 x 85⁄8
544 x 258 x 220
Bottom and Aluminum Lid
Inches
mm
1
1
1
23 ⁄4 x 11 ⁄4 x 4 ⁄4
592 x 285 x 108
1
1
21 ⁄2 x 10 ⁄8 x 3
544 x 258 x 75
Bottom and Aluminum Lid
Inches
mm
1
1
1
23 ⁄4 x 11 ⁄4 x 5 ⁄2
592 x 285 x 138
211⁄2 x 101⁄8 x 41⁄8
544 x 258 x 105
Bottom and Aluminum Lid
Inches
mm
231⁄4 x 111⁄4 x 6
592 x 285 x 153
1
1
3
21 ⁄2 x 10 ⁄8 x 4 ⁄4
544 x 258 x 120
Bottom and Aluminum Lid
Inches
mm
1
1
23 ⁄4 x 11 ⁄4 x 8
592 x 285 x 205
1
1
3
21 ⁄2 x 10 ⁄8 x 6 ⁄4
544 x 258 x 172
Bottom and Aluminum Lid
Inches
mm
1
1
1
23 ⁄4 x 11 ⁄4 x 10 ⁄2
592 x 285 x 265
211⁄2 x 101⁄8 x 91⁄8
544 x 258 x 232
FULL-SIZE STAINLESS STEEL BASKETS
Length x Width x Height (Inches)
JC222R
Outside (in.)
211⁄4 x 10 x 2
JC223R
Outside (in.)
211⁄4 x 10 x 23⁄4
JC224R
Outside (in.)
211⁄4 x 10 x 4
Inside (in.)
207⁄8 x 95⁄8 x 15⁄8
Inside (in.)
207⁄8 x 95⁄8 x 23⁄8
Inside (in.)
207⁄8 x 95⁄8 x 35⁄8
Length x Width x Height (mm)
Outside (mm)
Inside (mm)
540 x 254 x 51
530 x 244 x 41
Outside (mm)
Inside (mm)
540 x 254 x 70
530 x 244 x 60
Outside (mm)
Inside (mm)
540 x 254 x 102
530 x 244 x 92
Inside (in.)
211⁄8 x 97⁄8 x 7⁄8
Inside (in.)
211⁄8 x 97⁄8 x 15⁄8
Inside (in.)
211⁄8 x 97⁄8 x 21⁄2
Inside (in.)
211⁄8 x 97⁄8 x 35⁄8
Length x Width x Height (mm)
Outside (mm)
Inside (mm)
540 x 253 x 36*
538 x 251 x 22
Outside (mm)
Inside (mm)
540 x 253 x 56*
538 x 251 x 42
Outside (mm)
Inside (mm)
540 x 253 x 76*
538 x 251 x 62
Outside (mm)
Inside (mm)
540 x 253 x 106*
538 x 251 x 92
PERFORATED BASKETS
Length x Width x Height (Inches)
JF221R
Outside (in.)
211⁄4 x 10 x 11⁄2*
JF222R
Outside (in.)
211⁄4 x 10 x 21⁄4*
JF223R
Outside (in.)
211⁄4 x 10 x 3*
JF224R
Outside (in.)
211⁄4 x 10 x 41⁄8*
BASKET COVER FOR PERFORATED BASKETS
Length x Width x Height (Inches and mm)
JF227R
Outside (in.)
211⁄2 x 101⁄16 x 3⁄4
Outside (mm)
544 x 257 x 18
* Basket height includes feet
67
SterilContainer™ Product Dimensions
THREE-QUARTER SIZE CONTAINERS
Length x Width x Height (Inches and mm)
JN740
Bottom Only
Inches
Outside Dimension
181⁄2 x 103⁄4 x 31⁄2
Inside Dimension
JN741
Bottom Only
Inches
Outside Dimension
181⁄2 x 103⁄4 x 43⁄4
Inside Dimension
JN742
Bottom Only
Inches
Outside Dimension
181⁄2 x 103⁄4 x 51⁄4
Inside Dimension
JK740
Bottom Only
Inches
Outside Dimension
181⁄2 x 103⁄4 x 31⁄2
Inside Dimension
JK741
Bottom Only
Inches
Outside Dimension
181⁄2 x 103⁄4 x 43⁄4
Inside Dimension
JK742
Bottom Only
Inches
Outside Dimension
181⁄2 x 103⁄4 x 51⁄4
Inside Dimension
JN744
Bottom Only
Inches
Outside Dimension
181⁄2 x 103⁄4 x 73⁄8
Inside Dimension
68
mm
470 x 274 x 90
mm
470 x 274 x 120
mm
470 x 274 x 135
mm
470 x 274 x 90
mm
470 x 274 x 120
mm
470 x 274 x 135
mm
470 x 274 x 187
Length x Width x Height (Inches and mm)
Bottom and Aluminum Lid
Inches
mm
181⁄2 x 111⁄4 x 41⁄4
470 x 285 x 108
161⁄4 x 101⁄8 x 21⁄2
421 x 258 x 63
Bottom and Aluminum Lid
Inches
mm
181⁄2 x 111⁄4 x 51⁄2
470 x 285 x 138
161⁄4 x 101⁄8 x 35⁄8
421 x 258 x 93
Bottom and Aluminum Lid
Inches
mm
1
1
18 ⁄2 x 11 ⁄4 x 6
470 x 285 x 153
1
1
1
16 ⁄4 x 10 ⁄8 x 4 ⁄4
421 x 258 x 108
Bottom and Aluminum Lid
Inches
mm
1
1
1
18 ⁄2 x 11 ⁄4 x 4 ⁄4
470 x 285 x 108
161⁄4 x 101⁄8 x 3
421 x 258 x 75
Bottom and Aluminum Lid
Inches
mm
181⁄2 x 111⁄4 x 51⁄2
470 x 285 x 138
161⁄4 x 101⁄8 x 41⁄8
421 x 258 x 105
Bottom and Aluminum Lid
Inches
mm
1
1
18 ⁄2 x 11 ⁄4 x 6
470 x 285 x 153
1
1
3
16 ⁄4 x 10 ⁄8 x 4 ⁄4
421 x 258 x 120
Bottom and Aluminum Lid
Inches
mm
1
1
18 ⁄2 x 11 ⁄4 x 8
470 x 285 x 205
161⁄4 x 101⁄8 x 63⁄4
421 x 258 x 172
THREE-QUARTER SIZE STAINLESS STEEL BASKETS
Length x Width x Height (Inches)
JC252R
Outside (in.)
16 x 10 x 2
JC253R
Outside (in.)
16 x 10 x 23⁄4
JC254R
Outside (in.)
16 x 10 x 4
Inside (in.)
155⁄8 x 95⁄8 x 15⁄8
Inside (in.)
155⁄8 x 95⁄8 x 23⁄8
Inside (in.)
155⁄8 x 95⁄8 x 35⁄8
Length x Width x Height (mm)
Outside (mm)
Inside (mm)
406 x 254 x 51
397 x 244 x 41
Outside (mm)
Inside (mm)
406 x 254 x 70
397 x 244 x 60
Outside (mm)
Inside (mm)
406 x 254 x 102
397 x 244 x 92
Inside (in.)
157⁄8 x 97⁄8 x 7⁄8
Inside (in.)
157⁄8 x 97⁄8 x 15⁄8
Inside (in.)
157⁄8 x 97⁄8 x 21⁄2
Inside (in.)
157⁄8 x 97⁄8 x 35⁄8
Length x Width x Height (mm)
Outside (mm)
Inside (mm)
406 x 253 x 36*
404 x 251 x 22
Outside (mm)
Inside (mm)
406 x 253 x 56*
404 x 251 x 42
Outside (mm)
Inside (mm)
406 x 253 x 76*
404 x 251 x 62
Outside (mm)
Inside (mm)
406 x 253 x 106*
404 x 251 x 92
PERFORATED BASKETS
Length x Width x Height (Inches)
JF251R
Outside (in.)
16 x 10 x 11⁄2*
JF252R
Outside (in.)
16 x 10 x 21⁄4*
JF253R
Outside (in.)
16 x 10 x 3*
JF254R
Outside (in.)
16 x 10 x 41⁄8*
BASKET COVER FOR PERFORATED BASKETS
Length x Width x Height (Inches and mm)
JF257R
Outside (in.)
161⁄2 x 107⁄8 x 3⁄4
Outside (mm)
419 x 276 x 19
* Basket height includes feet
69
SterilContainer™ Product Dimensions
HALF-SIZE CONTAINERS
Length x Width x Height (Inches and mm)
JN340
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 31⁄2
Inside Dimension
JN341
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 43⁄4
Inside Dimension
JN342
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 51⁄4
Inside Dimension
JN344
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 73⁄8
Inside Dimension
JN346
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 93⁄4
Inside Dimension
JK340
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 31⁄2
Inside Dimension
JK341
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 43⁄4
Inside Dimension
JK342
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 51⁄4
Inside Dimension
JK344
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 73⁄8
Inside Dimension
JK346
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 93⁄4
Inside Dimension
70
mm
300 x 274 x 90
mm
300 x 274 x 120
mm
300 x 274 x 135
mm
300 x 274 x 187
mm
300 x 274 x 247
mm
300 x 274 x 90
mm
300 x 274 x 120
mm
300 x 274 x 135
mm
300 x 274 x 187
mm
300 x 274 x 247
Length x Width x Height (Inches and mm)
Bottom and Aluminum Lid
Inches
mm
113⁄4 x 111⁄4 x 41⁄4
300 x 285 x 108
10 x 101⁄8 x 21⁄2
254 x 258 x 63
Bottom and Aluminum Lid
Inches
mm
113⁄4 x 111⁄4 x 51⁄2
300 x 285 x 138
10 x 101⁄8 x 35⁄8
254 x 258 x 93
Bottom and Aluminum Lid
Inches
mm
3
1
11 ⁄4 x 11 ⁄4 x 6
300 x 285 x 153
1
1
10 x 10 ⁄8 x 4 ⁄4
254 x 258 x 108
Bottom and Aluminum Lid
Inches
mm
3
1
11 ⁄4 x 11 ⁄4 x 8
300 x 285 x 205
10 x 101⁄8 x 61⁄4
254 x 258 x 160
Bottom and Aluminum Lid
Inches
mm
113⁄4 x 111⁄4 x 101⁄2
300 x 285 x 265
10 x 101⁄8 x 85⁄8
254 x 258 x 220
Bottom and Aluminum Lid
Inches
mm
3
3
1
11 ⁄4 x 10 ⁄4 x 4 ⁄4
300 x 285 x 108
1
10 x 10 ⁄8 x 3
254 x 258 x 75
Bottom and Aluminum Lid
Inches
mm
3
3
1
11 ⁄4 x 10 ⁄4 x 5 ⁄2
300 x 285 x 138
10 x 101⁄8 x 41⁄4
254 x 258 x 108
Bottom and Aluminum Lid
Inches
mm
113⁄4 x 103⁄4 x 6
300 x 285 x 153
1
3
10 x 10 ⁄8 x 4 ⁄4
254 x 258 x 120
Bottom and Aluminum Lid
Inches
mm
3
3
11 ⁄4 x 10 ⁄4 x 8
300 x 285 x 205
1
3
10 x 10 ⁄8 x 6 ⁄4
254 x 258 x 172
Bottom and Aluminum Lid
Inches
mm
3
3
1
11 ⁄4 x 10 ⁄4 x 10 ⁄2
300 x 285 x 265
10 x 101⁄8 x 91⁄8
254 x 258 x 232
HALF-SIZE STAINLESS STEEL BASKETS
Length x Width x Height (Inches)
JC112R
Outside (in.)
91⁄2 x 10 x 2
JC113R
Outside (in.)
91⁄2 x 10 x 23⁄4
JC114R
Outside (in.)
91⁄2 x 10 x 4
Inside (in.)
91⁄8 x 95⁄8 x 15⁄8
Inside (in.)
91⁄8 x 95⁄8 x 23⁄8
Inside (in.)
91⁄8 x 95⁄8 x 35⁄8
Length x Width x Height (mm)
Outside (mm)
Inside (mm)
241 x 254 x 51
232 x 244 x 41
Outside (mm)
Inside (mm)
241 x 254 x 70
232 x 244 x 60
Outside (mm)
Inside (mm)
241 x 254 x 102
232 x 244 x 92
Inside (in.)
91⁄2 x 95⁄8 x 7⁄8
Inside (in.)
91⁄2 x 95⁄8 x 15⁄8
Inside (in.)
91⁄2 x 95⁄8 x 21⁄2
Inside (in.)
91⁄2 x 95⁄8 x 35⁄8
Length x Width x Height (mm)
Outside (mm)
Inside (mm)
253 x 243 x 36*
251 x 241 x 22
Outside (mm)
Inside (mm)
253 x 243 x 56*
251 x 241 x 42
Outside (mm)
Inside (mm)
253 x 243 x 76*
251 x 241 x 62
Outside (mm)
Inside (mm)
253 x 243 x 106*
251 x 241 x 92
PERFORATED BASKETS
Length x Width x Height (Inches)
JF111R
Outside (in.)
10 x 97⁄8 x 11⁄2*
JF112R
Outside (in.)
10 x 97⁄8 x 21⁄4*
JF113R
Outside (in.)
10 x 97⁄8 x 3*
JF114R
Outside (in.)
10 x 97⁄8 x 41⁄8*
BASKET COVER FOR PERFORATED BASKETS
Length x Width x Height (Inches and mm)
JF117R
Outside (in.)
101⁄8 x 93⁄4 x 3⁄4
Outside (mm)
257 x 247 x 18
* Basket height includes feet
71
SterilContainer™ Product Dimensions
QUARTER-SIZE CONTAINERS FOR DENTAL
Filter Requirements: Perforated Bottoms with lids require two US992 filters. (6.5" x 9")
Length x Width x Height (Inches)
Length x Width x Height (mm)
JN092
Outside (in.)
Inside (in.)
Outside (mm)
121⁄4 x 71⁄2 x 17⁄8
11 x 7 x 3⁄4
313 x 190 x 46
JN094
Outside (in.)
Inside (in.)
Outside (mm)
1
1
1
1
12 ⁄4 x 7 ⁄2 x 2 ⁄2
11 x 7 x 1 ⁄2
313 x 190 x 65
JN095
Outside (in.)
Inside (in.)
Outside (mm)
121⁄4 x 71⁄2 x 35⁄8
11 x 7 x 21⁄2
313 x 190 x 92
JN096
Outside (in.)
Inside (in.)
Outside (mm)
1
1
1
12 ⁄4 x 7 ⁄2 x 5 ⁄8
11 x 7 x 4
313 x 190 x 130
Inside (mm)
277 x 177 x 20
Inside (mm)
277 x 177 x 39
Inside (mm)
277 x 177 x 66
Inside (mm)
277 x 177 x 104
QUARTER-SIZE LID ONLY
Length x Width x Height (Inches and mm)
JN091
Outside (in.)
121⁄2 x 71⁄2 x 1
Outside (mm)
319 x 190 x 25
QUARTER-SIZE CONTAINER BASKETS
Length x Width x Height (Inches)
JF264R
Outside (in.)
103⁄4 x 7 x 15⁄8
Inside (in.)
101⁄8 x 65⁄8 x 13⁄8
Length x Width x Height (mm)
Outside (mm)
Inside (mm)
274 x 177 x 42
258 x 170 x 34
Quarter Size Perforated Basket with Lid and Silicone Cushioning Rack
JF282R
Outside (in.)
105⁄8 x 63⁄4 x 35⁄8
Inside (in.)
101⁄2 x 65⁄8 x 31⁄2
JF289R
Outside (in.)
103⁄4 x 7 x 5⁄8
Outside (mm)
273 x 177 x 16
Outside (in.)
103⁄4 x 35⁄16 x 13⁄16
Inside (in.)
101⁄8 x 3 x 11⁄16
Outside (mm)
270 x 171 x 93
Inside (mm)
267 x 169 x 66
Outside (mm)
273 x 84 x 30
Inside (mm)
257 x 76 x 27
Quarter Size Lid for tray JF282R
JG380R
Mini-Size perforated basket with lid and three instrument racks, two side by side wil fit into JN094
JG381R
Outside (in.)
103⁄4 x 7 x 13⁄16
Inside (in.)
101⁄8 x 65⁄8 x 11⁄16
Outside (mm)
273 x 177 x 30
Inside (mm)
257 x 168 x 27
Inside (in.)
101⁄8 x 65⁄8 x 11⁄2
Outside (mm)
273 x 177 x 41
Inside (mm)
257 x 168 x 38
Quarter-Size perforated basket with lid
JG384R
Outside (in.)
103⁄4 x 7 x 15⁄8
Quarter-Size perforated basket with lid and three instrument racks, one JG381R and one JG384R can fit into JN095
MD374
Outside (in.)
103⁄4 x 7 x 15⁄8
Inside (in.)
101⁄8 x 65⁄8 x 13⁄8
Quarter Size Perforated Basket with Lid and Silicone Cushioning Rack
72
Outside (mm)
274 x 177 x 42
Inside (mm)
258 x 170 x 34
MINI-SIZE CONTAINERS
Length x Width x Height (Inches and mm)
JN187
Bottom Only
Inches
Outside Dimension
121⁄4 x 51⁄8 x 11⁄8
Inside Dimension
JN188
Bottom Only
Inches
Outside Dimension
121⁄4 x 51⁄8 x 21⁄4
Inside Dimension
JK187
Bottom Only
Inches
Outside Dimension
121⁄4 x 51⁄8 x 11⁄8
Inside Dimension
JK188
Bottom Only
Inches
Outside Dimension
121⁄4 x 51⁄8 x 21⁄4
Inside Dimension
mm
310 x 132 x 30
mm
310 x 132 x 57
mm
310 x 132 x 30
mm
310 x 132 x 57
Length x Width x Height (Inches and mm)
Bottom and Aluminum Lid
Inches
mm
1
1
1
12 ⁄4 x 5 ⁄2 x 1 ⁄2
310 x 140 x 40
103⁄4 x 5 x 11⁄4
274 x 126 x 33
Bottom and Aluminum Lid
Inches
mm
121⁄4 x 51⁄2 x 25⁄8
310 x 140 x 67
103⁄4 x 5 x 2
274 x 126 x 50
Bottom and Aluminum Lid
Inches
mm
1
1
1
12 ⁄4 x 5 ⁄2 x 1 ⁄2
310 x 140 x 40
3
10 ⁄4 x 5 x 1
274 x 126 x 25
Bottom and Aluminum Lid
Inches
mm
1
1
5
12 ⁄4 x 5 ⁄2 x 2 ⁄8
310 x 140 x 67
103⁄4 x 5 x 2
274 x 126 x 52
MINI-SIZE CONTAINER BASKETS
Length x Width x Height (Inches)
JF159R
Outside (in.)
101⁄2 x 5 x 2
JG380R
Outside (in.)
103⁄4 x 33⁄8 x 15⁄8
Inside (in.)
101⁄4 x 45⁄8 x 15⁄8
Inside (in.)
101⁄2 x 31⁄8 x 13⁄8
Length x Width x Height (mm)
Outside (mm)
267 x 125 x 49
Outside (mm)
273 x 84 x 41
Inside (mm)
261 x 118 x 41
Inside (mm)
267 x 77 x 33
73
SterilContainer™ Product Dimensions
EXTRA-LONG CONTAINERS
Length x Width x Height (Inches and mm)
JN445
Bottom Only
Inches
Outside Dimension
28 x 103⁄4 x 73⁄8
Inside Dimension
mm
711 x 274 x 187
Length x Width x Height (Inches and mm)
Bottom and Aluminum Lid
Inches
mm
28 x 11 x 8
711 x 280 x 205
261⁄4 x 101⁄4 x 61⁄4
667 x 261 x 160
EXTRA-LONG PERFORATED BASKET
Length x Width x Height (Inches)
JF232R
Outside (in.)
26 x 10 x 21⁄4
Inside (in.)
257⁄8 x 97⁄8 x 15⁄8
Length x Width x Height (mm)
Outside (mm)
Inside (mm)
662 x 254 x 56
658 x 251 x 42
Inside (in.)
211⁄2 x 133⁄4 x 35⁄8
Inside (in.)
211⁄2 x 133⁄4 x 6
Inside (in.)
211⁄2 x 133⁄4 x 4
Inside (in.)
211⁄2 x 133⁄4 x 61⁄2
Length x Width x Height (mm)
Outside (mm)
600 x 400 x 120
Outside (mm)
600 x 400 x 180
Outside (mm)
600 x 400 x 120
Outside (mm)
600 x 400 x 180
WIDE-BODY CONTAINERS
Length x Width x Height (Inches)
JN817
Outside (in.)
235⁄8 x 153⁄4 x 43⁄4
JN821
Outside (in.)
235⁄8 x 153⁄4 x 7
JK817
Outside (in.)
235⁄8 x 153⁄4 x 43⁄4
JK821
Outside (in.)
235⁄8 x 153⁄4 x 7
WIDE-BODY BASKETS
Length x Width x Height (Inches and mm)
JE167R
Outside (in.)
21 x 131⁄4 x 2
JE168R
Outside (in.)
21 x 131⁄4 x 3
JE169R
Outside (in.)
21 x 131⁄4 x 4
Outside (mm)
533 x 337 x 51
Outside (mm)
533 x 337 x 76
Outside (mm)
533 x 337 x 102
FLASH-GUARD HALF-SIZE FLASH CONTAINER SYSTEM
Length x Width x Height (Inches and mm)
MD884
Outside (in.)
12 x 11 x 87⁄8
Outside (mm)
305 x 280 x 225
FLASH-GUARD FULL-SIZE FLASH CONTAINER SYSTEM
Length x Width x Height (Inches and mm)
MD885
Outside (in.)
237⁄8 x 11 x 87⁄8
74
Outside (mm)
605 x 280 x 225
Inside (mm)
544 x 350 x 91
Inside (mm)
544 x 350 x 151
Inside (mm)
544 x 350 x 103
Inside (mm)
544 x 350 x 163
SterilContainer S ™
Length x Width x Height (Inches and mm)
JM440
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 31⁄2
Inside Dimension
JM441
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 43⁄4
Inside Dimension
JM442
Bottom Only
Inches
Outside Dimension
231⁄4 x 103⁄4 x 51⁄4
Inside Dimension
JM740
Bottom Only
Inches
Outside Dimension
181⁄2 x 103⁄4 x 31⁄2
Inside Dimension
JM741
Bottom Only
Inches
Outside Dimension
181⁄2 x 103⁄4 x 43⁄4
Inside Dimension
JM742
Bottom Only
Inches
Outside Dimension
181⁄2 x 103⁄4 x 51⁄4
Inside Dimension
JM340
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 31⁄2
Inside Dimension
JM341
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 43⁄4
Inside Dimension
JM342
Bottom Only
Inches
Outside Dimension
113⁄4 x 103⁄4 x 51⁄4
Inside Dimension
mm
592 x 274 x 90
mm
592 x 274 x 120
mm
592 x 274 x 135
mm
470 x 274 x 90
mm
470 x 274 x 120
mm
470 x 274 x 135
mm
300 x 274 x 90
mm
300 x 274 x 120
mm
300 x 274 x 135
Length x Width x Height (Inches and mm)
Bottom and Aluminum Lid
Inches
mm
1
1
1
23 ⁄4 x 11 ⁄4 x 4 ⁄4
592 x 285 x 108
211⁄2 x 101⁄8 x 21⁄2
544 x 258 x 63
Bottom and Aluminum Lid
Inches
mm
231⁄4 x 111⁄4 x 51⁄2
592 x 285 x 138
211⁄2 x 101⁄8 x 35⁄8
544 x 258 x 93
Bottom and Aluminum Lid
Inches
mm
1
1
23 ⁄4 x 11 ⁄4 x 6
592 x 285 x 153
1
1
1
21 ⁄2 x 10 ⁄8 x 4 ⁄4
544 x 258 x 108
Bottom and Aluminum Lid
Inches
mm
1
1
1
18 ⁄2 x 11 ⁄4 x 4 ⁄4
470 x 285 x 108
161⁄4 x 101⁄8 x 21⁄2
421 x 258 x 63
Bottom and Aluminum Lid
Inches
mm
181⁄2 x 111⁄4 x 51⁄2
470 x 285 x 138
161⁄4 x 101⁄8 x 35⁄8
421 x 258 x 93
Bottom and Aluminum Lid
Inches
mm
1
1
18 ⁄2 x 11 ⁄4 x 6
470 x 285 x 153
1
1
1
16 ⁄4 x 10 ⁄8 x 4 ⁄4
421 x 258 x 108
Bottom and Aluminum Lid
Inches
mm
3
1
1
11 ⁄4 x 11 ⁄4 x 4 ⁄4
300 x 285 x 108
10 x 101⁄8 x 21⁄2
254 x 258 x 63
Bottom and Aluminum Lid
Inches
mm
113⁄4 x 111⁄4 x 51⁄2
300 x 285 x 138
10 x 101⁄8 x 35⁄8
254 x 258 x 93
Bottom and Aluminum Lid
Inches
mm
3
1
11 ⁄4 x 11 ⁄4 x 6
300 x 285 x 153
1
1
10 x 10 ⁄8 x 4 ⁄4
254 x 258 x 108
75
Numerical Index
76
Item No.
Page
Item No.
Page
Item No.
Page
Item No.
Page
FD465R
49
JF148R
29, 30
JF820
56
JG308
26, 30
FD470R
49
JF149R
29, 48
JF889R
57
JG309
26
FD475R
49
JF150R
29, 48
JF890R
57
JG310
26
FD480R
49
JF159R
19
JF900
55
JG312
26, 30
FM665R
48
JF210R
28
JF901
55
JG313
26
JB112R
22
JF221R
11
JF902
56
JG314
26
JB113R
22
JF222R
11
JF903
56
JG316
26
JB114R
22
JF223R
11
JF905
47
JG317
26, 30
JB222R
22
JF224R
11
JF906R
47
JG318
26
JB223R
22
JF227R
11
JF907R
47
JG321
26
JB224R
22
JF232R
17
JF908R
47
JG322
26
JB252R
22
JF250R
28
JF909R
47
JG323
26
JB253R
22
JF251R
13
JF921R
46
JG324
26
JB254R
22
JF252R
13
JF922R
46
JG325
26
JC112R
15
JF253R
13
JF923R
46
JG330
28, 30
JC113R
15
JF254R
13
JF933
17, 52
JG331
28
JC114R
15
JF257R
13
JF938
29, 52
JG332
28
JC222R
11
JF264R
18
JF939
29, 52
JG340
16, 27
JC223R
11
JF282R
18
JF940
29, 52
JG341
27
JC224R
11
JF289R
18
JF941
29, 52
JG342
27
JC252R
13
JF343
16, 27
JF942
29, 52
JG343
16, 27
JC253R
13
JF346
27, 30, 41
JF943
29, 52
JG344
27
JC254R
13
JF377
40
JF944R
29, 53
JG352R
27
JE167R
20
JF378R
46
JF945R
29, 53
JG353R
27
JE168R
20
JF379
40
JF946
29, 52
JG354R
27
JE169R
20
JF381R
46
JF947
29, 53
JG358
27, 30
JE601
20
JF388
40
JF949
29, 53
JG359
27
JF110R
28, 30
JF431R
42
JF950
58
JG360
27
JF111R
15
JF432R
42
JF952
58
JG361
26
JF112210
61
JF433R
42
JF953
58
JG367
16, 28
JF112R
15
JF434R
42
JF954
58
JG368
16, 28
JF113R
15
JF435R
16, 42
JG300
28
JG369
16, 28
JF114R
15
JF436R
42
JG301R
28
JG370
28
JF117R
15
JF715R
47
JG302
28
JG371
29
JF120R
30, 45
JF791
55
JG304
26
JG372
29
JF146R
29
JF793
56
JG305
26
JG380R
18, 19
JF147R
29
JF803
55
JG306
26
JG381R
18
Item No.
Page
Item No.
Page
Item No.
Page
Item No.
Page
JG384R
18
JK188
19
JM340
21
JP001
10
JG504R
60
JK262R
62
JM341
21
JP001202
61
JG506R
60
JK268R
62
JM342
21
JP001204
61
JG598
53
JK340
14
JM389
21
JP002
10
JG600
53
JK341
14
JM440
21
JP003
10
JG601
53
JK342
14
JM441
21
JP004
10
JG675U
39
JK344
14
JM442
21
JP005
10
JG685
56
JK346
14
JM489
21
JP006
10
JG690R
39
JK385
14
JM740
21
JP007
10
JG697R
49
JK386
14
JM741
21
JP011
12
JG698R
49
JK387
14
JM742
21
JP012
12
JG785U
38
JK388
14
JM789
21
JP013
12
JG786U
38
JK389
14
JN021
16
JP014
12
JG787U
38
JK440
10
JN091
18
JP015
12
JG788U
38
JK441
10
JN092
18
JP016
12
JG790U
38
JK442
10
JN094
18
JP017
12
JG792U
38
JK444
10
JN095
18
JP021
14
JG793U
38
JK446
10
JN096
18
JP022
14
JG794U
38
JK485
10
JN187
19
JP023
14
JK020
16
JK486
10
JN188
19
JP024
14
JK060R
62
JK487
10
JN340
14
JP025
14
JK062R
62
JK488
10
JN341
14
JP026
14
JK067R
62
JK489
10
JN342
14
JP027
14
JK068R
62
JK490
17
JN344
14
JP050
61
JK086
61
JK740
12
JN346
14
JP055
61
JK089
35
JK741
12
JN440
10
MB071
31
JK090
35
JK742
12
JN441
10
MB072
31
JK091
35
JK785
12
JN442
10
MB073
31
JK092
35
JK786
12
JN444
10
MB074
31
JK098
61
JK787
12
JN445
17
MB075
31
JK100
61
JK788
12
JN446
10
MB076
31
JK170
19
JK789
12
JN740
12
MB077
31
JK171
19
JK817
20
JN741
12
MB078
31
JK172
19
JK821
20
JN742
12
MB079
31
JK173
19
JL903
58
JN744
12
MB080
31
JK174
19
JM020
16
JN817
20
MB216
41
JK187
19
JM021
16
JN821
20
MB217
41
77
Numerical Index
78
Item No.
Page
Item No.
Page
Item No.
Page
Item No.
Page
MB218
41
MD876
34
US754
34
US937
38
MB219
41
MD884
20
US756
35
US938
38
MB220
41
MD885
20
US810
39
US939
38
MB901
36
MD894
52
US811
39
US940
38
MB902
36
MD895
52
US812
39
US941
38
MB903
36
MD896
52
US813
39
US942
38
MD262
54
MD897
52
US814
39
US943
38
MD263
57
MD898
52
US815
39
US948
50
MD264
45
MD927
44
US862
59
US949
50
MD265
54
MD928
44
US863
59
US952
50
MD266
54
MD929
44
US865
59
US953
50
MD298
57
MD937
44
US866
59
US956
50
MD299
57
ME150
40
US867
59
US957
50
MD301
45
ME151
40
US869
59
US961
51
MD322
42
ME154
40
US870
59
US963
34
MD323
42
ME156
40
US872
59
US965
38
MD324
42
ME158
40
US888
39
US966
38
MD325
36
ME160
40
US889
39
US967
38
MD326
36
ME161
40
US890
39
US968
38
MD327
36
PL960206
43
US891
39
US969
38
MD328
36
PL960R
43
US897
39
US970
38
MD329
36
PL961R
17, 43
US898
39
US971
38
MD330
36
PL962R
26, 43
US899
39
US972
38
MD331
36
PL963R
43
US900
34
US973
38
MD334
16, 34
PL964R
17, 43
US904
39
US974
38
MD344
35
TE740
58
US905
34
US975
46
MD346
16, 34
US060
60
US906
34
US976
46
MD347
34
US061
60
US909
39
US977
46
MD355
16, 35
US062
60
US910
34
US978
46
MD363
20
US063
60
US925
39
US990
34
MD365
44
US064
60
US926
39
US991
34
MD374
18
US065
60
US928
41
US992
35
MD375
17
US066
60
US929
41
US994
35
MD377
43
US067
60
US930
41
US998
35
MD378
43
US250
56
US931
41
US999
16, 35
MD379
17
US399
34
US935
38
MD399
34
US751
35
US936
38
Surgical Technologies
Key Product Literature
DOC373 - U.S. General
Instruments Catalog
DOC426 - Ligation System
Brochure
DOC465 - Laparoscopic
Instruments Catalog
DOC570 - 360 Day PrimeLine®
Study Summary
DOC613 - Validation Study
for SterilContainer 2000 in
Flash Sterilization
DOC719 - Microinstruments
for Cardio and Vascular
Surgery Brochure
DOC752 - SterilContainer
with PrimeLine Lid in Flash
DOC796 - Aesculap
SterilContainer Green Brochure
DOC821 - SuperCut Scissors
Brochure
To order copies of the validation studies, visit www.aicliterature.com
79
Sterilization Modalities Summary
Effective May 29, 2009
Visit www.aesculapusa.com for latest information
Aesculap Products
Container System
SterilContainer™
PrimeLine® Lid
2000 System
xL Mini Container
SterilContainer
S™
Filters
Y
Not Validated
Steam
Pre-Vac*
Gravity
Terminal
Terminal
and Flash
Y
Y
Y
Y
Y
Container System
Y
xL Mini Container
Y
Paper - Single Use
Polypropylene Single Use
Y
PTFE Reusable
Y
Y
EtO
All Forms
STERRAD
100S
System
®
Low Temperature
STERRAD STERRAD
200
NX™
System
System
STERRAD
100NX™
System
Y
Y
Not
Validated
Y
Not
Validated
Y
Y
Not
Validated
Y
Not
Validated
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Not
Validated
Not
Validated
Not
Validated
Not
Validated
Aesculap product available for use
Aesculap has not performed a validation study and is currently determining the market need
Aesculap has no plans to perform a validation study or material incompatible with Sterilant / modality
*Pre-Vac Flash Only use Solid Bottoms in Pre-Vac Flash. Refer to IFU for more details
For more information on Aesculap SterilContainer IFU’s (Instructions For Use) and Validation Reports, please refer to
www.aesculapusa.com
STERRAD is a registered trademark and NX and 100 are trademarks of Advanced Sterilization Products (ASP), a Division of Ethicon, Inc., a Johnson & Johnson company.
80
All rights reserved. Technical alterations are possible. This leaflet may be
used for no other purposes than offering, buying and selling of our products.
No part may be copied or reproduced in any form. In the case of misuse we
retain the rights to recall our catalogs and price lists and to take legal actions.
Aesculap, Inc.
©2009 AESCULAP. ALL RIGHTS RESERVED. PRINTED IN THE USA. DOC132 Rev. D 12M 11/09
Aesculap is an equal opportunity employer
3773 Corporate Parkway
Center Valley, PA 18034
Phone: 800-282-9000
www.aesculapusa.com

Similar documents

Aesculap S4® Spinal System

Aesculap S4® Spinal System intermuscular (Wiltse) approach is preferred by some surgeons. A Wiltse technique is a paramedian approach to the lumbosacral junction. Unlike a midline incision, where the exposure is created by c...

More information

Kerrisons - Aesculap

Kerrisons - Aesculap Press up inside part of handle and open handle.

More information