CAP 609 General information booklet

Transcription

Construction Industry Scaffolders Record Scheme
CAP 609
General information booklet
i
Construction Skills
Certification Scheme
Affiliated
Revised February 2013
Education in Access
Professional scaffolding training courses
l CISRS Part 1and Part 2
Tube & Fitting. Layher, Cuplok, Plettac, Kwikstage, Haki, Peri Up, TRADLok, K Lok
l CISRS 5 day BASE courses
l CISRS Advanced
l CISRS 2 day Product Training
Layher, Cuplok, Plettac, Kwikstage, Haki, Peri Up, TRADLok, K Lok
l
l
l
l
l
CISRS 5 Day Supervisor Courses
CISRS Scaffolding Inspection (Basic and Advanced)
QCF/NVQ Level 2 and 3
EWPA Level 2 (Experienced Worker Practical Assessment)
Skills Test 1 Day and 2 Day
l SMSTS (Site Manager Safety Training Scheme)
l SMSTS 2 Day Refresher
l SSSTS (Site Supervisor Safety Training Scheme)
l
l
l
l
l
l
Scaffolding Apprenticeships
PASMA Mobile Towers and Low Level
System Scaffolding Experts
CSkills Test Centre
Rescue Training
CITB Overseas Scaffolder Training
Full details of all our courses are available from our website - www.simian-skill.com
SaFETY + Training + aCCESS ConSULTanTS
Tel: 0845 602 2418 email: [email protected] www.simian-skill.com
Centre number 7084
Certificate no. 045329
WarringTon | London | UaE
Construction Industry Scaffolders Record Scheme
CAP 609
General information booklet
CISRS, 4th floor, 12 Bridewell Place, London EC4V 6AP
Tel: 020 7822 7400 Fax: 020 7822 7401
www.cisrs.org.uk
CISRS General Information Booklet
Published by:
Construction Industry Scaffolders Record Scheme (CISRS)
First published 1978
Revised 1986
Revised 1988
Revised 1993
Revised 1996
Revised 1997
Revised 2000
Revised 2003
Revised 2007
Revised 2008
Revised 2011
Revised 2013
© Copyright CISRS 2013
NOTES
The National Access and Scaffolding Confederation (NASC) represent the Scaffolding
Employers within the Construction Industry Joint Council (CIJC). The Unions, UNITE and
UCATT (Union of Construction Allied Trades and Technicians), represent the Employees
within the CIJC.
The CIJC has delegated the management and administration of Construction Industry
Scaffolders Record Scheme (CISRS) to the NASC. CISRS Ltd fulfils this role on the
NASC’s behalf.
CISRS Limited is responsible for the management and administration of Construction
Industry Scaffolders Record Scheme (CISRS).
CISRS is grateful for the advice given on the contents of this publication by the NASC,
the Access & Scaffolding Industry Training Organisation (ASITO) and its members.
CISRS has made every effort to ensure that the information contained within this
publication is accurate. CISRS accept no liability whatsoever in connection with this
document or any part thereof.
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without permission in writing from the CISRS.
Acknowledgements
CISRS would like to thank Simian Skills Ltd. for allowing them to use photographs of their
equipment and training centre when producing this booklet.
Printed by: Witherbys Lithoflow Printing, London
Designed by: Steve Phillips
2
Contents
Contents
Page no.
Foreword
5
1. Scope of the Scheme
7
2. Scaffolding Operative Schemes
8
2.1 CISRS Scaffolder (Tube and Fittings Route)
2.1.1 Trainee Scaffolder (Tube and Fitting)
2.1.2 Scaffolder (Tube and Fitting)
2.1.3 Advanced Scaffolder 2.2 CISRS Scaffolder (System Scaffolding Route)
2.2.1 Trainee Scaffolder (System)
2.2.2 Scaffolder (System)
2.3 System Scaffold Product Training Scheme (SSPTS)
2.4 Scaffolder Apprenticeships
2.5 Basic Access System Erector (BASE)
2.6 Scaffolding Labourer Card
3. Scaffolding Management and Supervisory Training
22
3.1 Scaffolding Management and Supervisory Training
4. Scaffold Inspection Training Scheme (SITS) 24
4.1 Retrospective training
4.2 Scaffold inspection training scheme (Basic)
4.3 Scaffold inspection training scheme (Advanced)
4.4 Refresher Training
4.5 CISRS Scaffolders, Advanced card holders
5. Vocational Qualification
27
5.1 Work Based Evidence
5.2 Experienced Worker Practical Assessment (EWPA)
5.3 On-Site Assessment and Training (OSAT)
6. Record Cards
29
6.1 Applying for a new record card
6.2 CITB Health, Safety and Environment Test
and recognised Exemptions
6.3 Card renewals
6.4 Upgrading expired CITB/CISRS Cards
6.5 Lost Cards
6.6 Card withdrawal/cancellation
6.7 Checking Record Cards
6.8 ECITB/ECI Skills Database Cards
6.9 Appeals Process
7. Grant Aid and Training Funding
35
7.1 CITB Grants available 2013 (CISRS Adult)
7.2 CITB Grants available 2013 (CISRS Apprenticeship)
Appendices
A
Training Objectives - Trainee Scaffolder (Part 1) Course - Tube and Ftting
37
B
Training Objectives - Scaffolder (Part 2) Course - Tube and Ftting
40
C
Training Objectives - Advanced Scaffolder Course - Tube and Ftting
43
D
Training Objectives - Trainee Scaffolder (Part 1) Course - Systems Scaffolding
46
E
Training Objectives - Scaffolder (Part 2) Course - Systems Scaffolding
49
F
Training Objectives - Systems Scaffold Product Training Scheme
52
G
N/SVQ Access and Rigging Operations Units
54
H
Useful Contacts
55
I
CISRS Accredited Training Providers
56
J
SSPTS Recognised Systems Scaffolding Products
58
3
Make sure you insist on…
Competent
Compliant
Regulated
Scaffolding
NATIONAL ACCESS AND SCAFFOLDING CONFEDERATION
“NASC wholly endorses
the CISRS scheme and insists
that member operatives
prove their competence
via CISRS Training and
assessment programmes”.
www.nasc.org.uk
Foreword
Foreword
The Construction Industry Scaffolders Record Scheme (CISRS) has been operating within
the UK for over 40 years. It is the industry recognised qualification for those working
within the scaffolding and access sector. The scheme offers a full range of practical and
theoretical training and assessment courses aimed at Scaffolding Labourers, Trainees,
Scaffolders, Advanced Scaffolders, Supervisors/Managers and Scaffolding Inspectors.
The scheme is based upon the principles of achieving qualification via formal off-site
training, on site work experience, completion of S/NVQ Accessing Operations and
Rigging (Construction), Practical Skills assessment and Health and Safety training/testing.
Over the years CISRS has ensured the scheme remains current, valid and robust by
seeking to incorporate relevant legislative or Technical and Health and Safety changes as
they occur.
Unlike many other trade schemes CISRS does not offer a “fast track” route to
qualification. In order to maintain the integrity of the scheme, all delegates must meet all
of the criteria laid out at the time of their registration and entry into the scheme.
There is a requirement to renew registration to CISRS on a regular basis (usually 5 years)
after completing a CITB Health, Safety and Environment test or a recognised exemption.
In order to keep qualifications current, CISRS are introducing a series of refresher courses
and a requirement to repeat short duration training after a set period of time has elapsed.
The Construction Industry Scaffolders Record Scheme has changed considerably in
the last 40 years. In this time we have witnessed the introduction of mandatory formal
training, S/NVQ, Health, Safety and Environment testing, practical assessment, systems
scaffolding and inspection courses. It is this commitment to improvement that allows
CISRS to retain its status as one of the most highly regarded trade qualification schemes
within the industry.
CISRS Scheme Manager
February 2013
5
ADULT
COURSES IN
SCAFFOLDING
Call 0191 200 4000 or visit
www.newcastlecollege.co.uk
for further details or to enrol.
CISRS Courses available:
CISRS Part 1: Tubes and Fitting
CISRS Part 2: Tubes and Fitting
CISRS 1 Day Assesment / Skills Test
CISRS Scaffold Inspection - Basic
Additional Courses available:
Safe Working at Height
Harness Inspection
PASMA Mobile Tower
SG4
Edge Protection
Ladder Awaremess and Inspection
General Health and Safety Courses
Abrasive Wheels
Confined Spaces
Asbestos Awareness
Manual Handling
Scaffold Awareness
TG20-08
We also have Level 2 Scaffolding Apprenticeships
available call 0191 200 4000 for further details.
Section 1 – Scope of the Scheme
1. Scope of the Scheme
The Construction Industry Scaffolders Record Scheme (CISRS) continues to expand and
develop operative and management/supervisory training. CISRS is now divided into three
categories, with each category offering different courses and programmes.
These categories are:
I. Scaffolding Operative Schemes
II. Scaffolding Management and Supervisory Training
III. Scaffold Inspector Training
The operative training schemes apply to all scaffolding operatives who are at any time
required to erect, alter or dismantle scaffolding. An operative who has not attained prescribed
levels of training, assessment and experience in scaffolding of a given kind, must not be
employed on such scaffolding work unless they are under adequate supervision.
Employers must demonstrate compliance with the requirements of the Health and Safety
at Work Act, the Work at Height Regulations, the Construction (Design and Management)
Regulations and other relevant statutory provisions with regard to training, competence and
supervision.
Since September 1996, in addition to completing CISRS Pt.1, Pt.2 and Advanced practical
courses it has been a mandatory requirement of the operative scheme for candidates to
achieve the relevant National or Scottish Vocational Qualification (N/SVQ) i.e. Level 2 VQ for
a Scaffolder Card and Level 3 VQ for an Advanced Scaffolder Card. The scheme has since
been further enhanced by the inclusion of a mandatory skills test/assessment following Pt.2
and Advanced training.
The aim of CISRS is to provide a range of management and supervisory training that
meets the specific needs of the scaffolding industry. The first course to be introduced into
the scheme was the 5-Day Scaffolding Supervisors course, which is aimed at first line
management of Scaffolding Contractors’ (i.e. Contracts Supervisors, Foremen and nonworking Charge-Hands). It is the intention of the Scheme to align all management and
supervisory training with relevant vocational qualifications in the future.
The purpose of the CISRS Labourer Card is to provide a CSCS Affiliated Card for nonscaffolders who support scaffolding operations on site. This will assist employers and clients
who require a fully CSCS qualified workforce on site. It also ensures that all operatives can
demonstrate a minimum level of health and safety knowledge in achieving the CITB Health,
Safety and Environment Test. As of September 2013 completion of a New Entrant Trainee/
Labourer course will become a mandatory scheme requirement.
Training and assessment within the CISRS can only be provided by CISRS Accredited
Centres with content and facilities approved and regularly audited by CISRS. The
requirements of centres and the training and assessment they provide is laid down in specific
scheme criteria documents and the vocational qualification standards.The following sections
provide information and an overview of the various schemes available.
7
Section 2 – Scaffolding Operative Schemes
2. Scaffolding Operative Schemes
The scaffolding operative schemes provided by CISRS Accredited Centres are the
nationally recognised training and assessment schemes for Scaffolding in the UK. It is
also viewed by many employers as scaffolding industry best practice overseas.
In addition to the traditional Scaffolder card scheme, based predominately on tube and
fitting equipment, CISRS also provides training, assessment and card schemes for
Scaffolding operatives who use modular system scaffolding. These include a proprietary
system scaffolding training and assessment scheme for Scaffolders, limited basic training
for non-scaffolders who regularly use system scaffolding equipment and a Scaffolding
Labourer’s card scheme.
CISRS Scaffolder Cards are only issued to candidates who:
I.attend the relevant CISRS training course(s)
II.have the required site experience in scaffolding operations
III.provide suitable evidence for assessment
IV.complete the relevant skills test and VQ assessment
V.complete the CITB Health, Safety and Environment Test or a
recognised exemption
The Record Cards are endorsed with the training courses and VQ qualifications achieved.
The flow chart (Figure 1) summarises the main CISRS Schemes available for Scaffolders.
2.1CISRS Scaffolder (Tube and Fitting Route)
The CISRS Scaffolder (Tube and Fitting) is the original scaffolders’ scheme. It
is aimed at scaffolding operatives who require scaffolding skills and knowledge
in using traditional tube and fitting scaffolding equipment. You can find more
information on Scaffolder Apprenticeships in section 2.4.
2.1.1 Trainee Scaffolder (Tube and Fitting)
Affiliated
Construction Industry
Scaffolders Record Scheme
MR A SAMPLE
The authenticity of this card can be checked by telephoning 0870 4177 223
Registration No: 00000000
Registration No: 00000000/1
PHOTO
Part 1 (Tube and Fitting)
Expiry Date: End Jan 2015
H&S
TESTED
TRAINEE SCAFFOLDER
The cardholder has met the Health and Safety Awareness
requirements as laid out in the CSCS Scheme Booklet
CSCS is a registered Certification Mark
An operative is considered a trainee until they have completed their Pt.1, Pt.2,VQ
Level 2, 1-day CISRS Skills Test and the CITB H, S & E Test irrelevant of their time
in the industry.
As of 1st September 2013 there will be a requirement to complete a 1-day New
Entrant Trainee Scaffolder course prior to the issue of an initial Trainee card.
8
New Entrant Scaffolding Trainee
Scaffolding Labourer
Complete New Entrant Trainee/Scaffolding Labourer CISRS 1 Day course (Sept. 2013)
Existing CISRS
Scaffolders / Advanced Scaffolders
Card Holders
Complete CITB Health, Safety and Environmental Test
CISRS Trainee
Scaffolder Card
CISRS Scaffolding
Labourer Card
6 months practical experience
Tube and Fitting
System Scaffold Route
(Product Specific)
Tube and Fitting Part 1 Training
System Scaffolding Part 1 Training
Tube and Fitting Part 1 Trainee
System Scaffolding Part 1 Trainee
Tube and Fitting Part 2 Training
and Register for S/NVQ
System Scaffolding Part 2 Training
and Register for S/NVQ
1-Day CISRS Skills Test & Assessment (VQ2)
Scaffolder Card (Tube and fitting)
Scaffolder Card (System)
2-Day System Scaffolding
Product Training
CISRS Advanced Scaffolder Training
CISRS Advanced Scaffolder Card
Figure 1 Overview of the CISRS Scaffolders Scheme
9
A training and assessment package will be available which will include a Power
Point presentation, a Manual Handling DVD, a series of test questions, practical
exercises and certificates etc. This will allow the course to be delivered via a CISRS
approved provider or in house by Scaffolding companies; assuming they have a
suitably qualified member of staff.
For further information on in-house delivery of The New Entrant Trainee/Scaffolding
Labourer course go to: www.cisrs.org.uk
The New Entrant Trainee/Scaffolding Labourer course will include:
Relevant Regulations and Codes of Practice
General Responsibilities
Basic Scaffold Terminology (Components & Application)
Servicing of Equipment, Tube, Fittings,
Boards & Stock - Quality Control
Health, Welfare, Hygiene & Housekeeping.
Electrical Safety
Fire Prevention & Control
Noise & Vibration
Work at Height
Accident Prevention & Reporting
Personal Protective Equipment
Site Transport Safety (Including Loading & Unloading)
Equipment & Tools
Manual Handling (Including a practical element)
Lifting Equipment Using a Rope & Wheel
Questions/Test Paper
Once an employer or sponsor accepts an operative to be trained as a Scaffolder,
the operative must complete the 1-day New Entrant Trainee course, pass a CITB
H, S & E Test or a recognised exemption and apply for their initial CISRS trainee
Scaffolder card.
An operative must have a minimum of 6 months practical on-site experience prior
to attending Pt.1 training.
Pt.1 training courses are booked directly with an Accredited Centre. A list of
Accredited Centres and contact details can be found in Appendix I. The Pt. 1
training for tube and fitting is held over 2 weeks (10 consecutive working days
Monday to Friday).
Upon successful completion of Pt.1 training, the Trainee will be issued with a
CISRS Completion Certificate and an application form to have their Trainee Card
endorsed with the Pt.1 training for tube and fitting. The Accredited providers will
notify CITB of successful completion.
Trainees who fail to demonstrate the required levels of experience, skill and
knowledge will fail the course. They will be required to attend the 2 week course
again once they have gained sufficient experience if they wish to progress.
10
Trainee Scaffolders may now be registered for Vocational Qualification Level 2
(VQ2) and start gathering records of work based evidence (see section 5 for further
information about vocational qualifications).
2.1.2 Scaffolder (Tube and Fitting)
Affiliated
MR A SAMPLE
H&S
TESTED
SCAFFOLDER
PHOTO
S/NVQ Level 2
Trainee’s must have at least 6 months practical scaffolding experience following
the successful completion of the Pt. 1 course before they can progress to the next
stage – Pt. 2 Scaffolder training. CISRS Accredited Centres are required to check
the individual holds a valid completion certificate or an updated CISRS Trainee Card
showing proof of Pt. 1 training before accepting a booking.
Trainees then attend a further 2 week Pt. 2 training course for tube and fitting at an
Accredited Centre (10 consecutive working days Monday to Friday). Trainees do not
have to use the same Accredited Centre as attended previously.
Note: A Trainee who has completed a Pt. 1 in tube and fitting is eligible to switch
to the System Scaffolding Route and complete the Pt. 2 System Scaffolder in a
particular system scaffolding product and vice versa. If this is the case the trainee
would be expected to gather work based evidence relevant to the type of Pt. 2
course they had attended e.g. tube and fitting or system.
Following the successful completion of the Pt. 2 training for tube and fitting,
trainees will be issued with a CISRS completion certificate by the Approved Centre.
However, they will not qualify to have their card upgraded and endorsed until the
VQ2 and relevant skills test has been completed. The Accredited providers will
Candidates who fail to demonstrate the required levels of experience skills and
Trainees require a further 6 months site experience, gathering work based evidence,
before submitting their portfolio for assessment and signing off prior to returning to
an Accredited Centre to undertake their 1-day skills test. The 1-day skills test can
take place at weekends.
As of 1st January 2011 successful completion of the 1-day skills test is a
mandatory element of the CISRS scheme. This is regardless of whether the trainee
has previously achieved their VQ via another route e.g. OSAT. A CISRS card will
11
not be issued to those who fail to successfully complete the 1-day skills test. If a
candidate fails the skills test, they must re-sit at a later date after gaining sufficient
experience.
As an alternative to completing the VQ portfolio of work based evidence,
Employers/Sponsors can choose for Trainee’s to undertake the Experienced Worker
Practical Assessment (EWPA) route. This would negate the need to complete the
1-day skills test, for further information see section 5.2.
Trainees who cannot demonstrate the required skill level to pass the EWPA course
will be referred back to their Employer / Sponsor for further practical experience.
They may, if they wish, complete their VQ via an alternative route.
Upon successful completion of Pt1, Pt 2, VQ2, CISRS 1-day skills test and CITB
H, S & E test, or recognised exemption, Trainees can apply for the CISRS Scaffolder
Card (Tube and Fitting), and may be deemed a qualified Scaffolder.
2.1.3 Advanced Scaffolder
Affiliated
MR A SAMPLE
H&S
TESTED
ADVANCED SCAFFOLDER
S/NVQ Level 2
Advanced Course (Tube and Fitting)
S/NVQ Level 3
When a Scaffolder has been in possession of a CISRS Scaffolder Card (Tube
and Fitting) for a minimum of 12 months they can then progress to complete the
approved training and assessment for Advanced Scaffolder (Tube and Fitting) VQ3.
CISRS training providers are required to check that a valid Scaffolder Card has been
held for the required length of time before accepting a booking.
Scaffolders attend a further 2 week Advanced Scaffolder training course at an
Accredited Centre (over 10 consecutive working days Monday to Friday).
Following the successful completion of the Advanced Scaffolder training for tube
and fitting, Scaffolders will be issued with a CISRS Completion certificate by the
Accredited Centre. However, they will not qualify to have their card upgraded and
endorsed until they have met all of the required criteria. The training providers will
Candidates who fail to demonstrate the required levels of experience, skills and
Operatives require a further 6 months practical experience gathering work based
evidence before submitting their portfolio for assessment and signing off, prior to
12
returning to an Accredited Centre to undertake their 2-day skills test.
Successful completion of the 2-day skills test is a mandatory element of the CISRS
scheme. This is regardless of whether the scaffolder has previously achieved their
VQ via another route e.g. OSAT. A CISRS card will not be issued to those who fail
to successfully complete the 2-day skills test. If a candidate fails the skills test, they
must re-sit at a later date after gaining sufficient experience.
Candidates who cannot demonstrate the required work based evidence for VQ3 will
be referred back to their Employer / Sponsor for further practical experience.
Once a delegate has met all of the scheme requirements for the Advanced Course,
VQ3, 2-Day Skills test, CITB H, S & E Test or recognised exemption, they are
eligible to upgrade their card to Advanced Scaffolder (Tube and Fitting) VQ3.
Currently the Advanced Scaffolder training and assessment scheme is only available
via the Tube and Fitting route.
2.2 CISRS Scaffolder (System Scaffolding Route)
The CISRS scheme for training and assessment using proprietary system
scaffolding equipment was introduced in 2006. It is aimed at Scaffolders who
require formal training and assessment in the skills and knowledge for the use of
specific modular system scaffolding products (e.g. Cuplok). It follows the same
programme as the Tube and Fitting route and vocational qualification to level 2.
Existing CISRS record card holders can attend a CISRS 2-day System Scaffolding
Product Training Scheme (SSPTS) to have their card endorsed with a specific
CISRS recognised product. For more information about the 2-day System
Scaffolding Product Training Scheme see section 2.3.
2.2.1 Trainee Scaffolder (System)
Affiliated
MR A SAMPLE
PHOTO
Part 1 (System Scaffold - Cuplok)
H&S
TESTED
TRAINEE SCAFFOLDER
An operative is considered a trainee until they have completed their Pt.1, Pt.2, VQ Level
2, 1-day CISRS Skills Test and the CITB H, S & E Test, or a recognised exemption,
irrelevant of their time in the industry.
As of 1st September 2013 there will be a requirement to complete a 1-day New
Entrant Trainee Scaffolder (System) course prior to the issue of an initial Trainee card.
13
The New Entrant Trainee Scaffolder (System) course will include:
Servicing of Equipment
Health, Welfare, Hygiene & Housekeeping
Electrical Safety
Noise & Vibration
Work at Height
Equipment & Tools
Lifting Equipment Using Rope & Wheel
Once an employer or sponsor accepts an operative to be trained as a Scaffolder,
the operative must complete the 1-day New Entrant Trainee course, pass a CITB
H, S & E Test or a recognised exemption and apply for their initial CISRS trainee
Scaffolder card. An operative must have a minimum of 6 months practical on site
experience prior to attending Pt. 1 training.
Pt. 1 training courses are booked directly with an Accredited Centre. A list of
Accredited Centres who may offer the various system scaffolding training courses
can be found in Appendix I. The Pt. 1 training for a system scaffolding product is
held over 2 weeks (10 consecutive working days Monday to Friday).
Upon successful completion of the Pt. 1 training the Trainee will be issued with
a CISRS Completion Certificate and an application form to have their Trainee
Card endorsed with the Pt. 1 training for the specific system scaffolding product
they have been trained in. The training providers will notify CITB of successful
completion.
Trainees who fail to demonstrate the required levels of experience, skills and
Trainee Scaffolders may now be registered for Vocational Qualification Level 2
(VQ2) and start gathering records of work based evidence (see section 5 for further
information about vocational qualifications).
14
2.2.2 Scaffolder (System)
Affiliated
MR A SAMPLE
H&S
TESTED
SCAFFOLDER
PHOTO
S/NVQ Level 2
Trainee’s must have at least 6 months practical scaffolding experience following the
successful completion Pt. 1 course before they can progress to the next stage – Pt.
2 System Scaffolder training. CISRS Accredited Centres are required to check the
individual holds a valid completion certificate or an updated CISRS Trainee Card
showing proof of Pt. 1 training before accepting a booking.
Trainees then attend a further 2 week Pt. 2 training course for a specific system
scaffolding product at an Accredited Centre (over 10 consecutive working days
Monday to Friday). Trainees do not have to use the same Centre as attended
previously.
Note: System Scaffolding Trainees who have completed their Pt. 1 System
Scaffolder training have the following options to progress to the Pt. 2 Training:
I.Continue with the same system scaffolding product as the Pt. 1;
or,
II.
Switch to a different recognised system scaffold product; or,
III.Switch to the Tube and Fitting route and enrol for a Tube and
Fitting Pt. 2 course.
The content of the Pt. 2 course and the VQ evidence will determine what the CISRS
card is endorsed with e.g. Cuplok or Kwikstage.
Following the successful completion of the Pt. 2 system training, Trainees will be
issued with a CISRS completion certificate by the Training Provider. However,
they will not qualify to have their card upgraded and endorsed until the Vocational
Qualification Level 2 (VQ2) and relevant skills test has been completed. The training
providers will notify CITB of successful completion.
Trainees who fail to demonstrate the required levels of experience, skills
and knowledge will fail the course. They will be required to attend the 2
week course again once they have gained sufficient experience if they wish
to progress.
Trainees require a further 6 months site experience, gathering work based evidence,
before submitting their portfolio for assessment and signing off prior to returning to
an Accredited Centre to undertake their 1-day skills test. The 1-day skills test can
take place at weekends.
15
Successful completion of the 1-day skills test is a mandatory element of the CISRS
scheme. This is regardless of whether the trainee has previously achieved his VQ
via another route e.g. OSAT. A CISRS card will not be issued to those who fail to
successfully complete the 1-day skills test. If a candidate fails the skills test, they
must re-sit at a later date after gaining sufficient experience.
As an alternative to completing the VQ portfolio of work based evidence Employers/
Sponsors can choose for Trainee’s to undertake the Experienced Worker Practical
Assessment (EWPA) route, this would negate the need to complete the 1-day skills
test. For further information see section 5.2.
Trainees who cannot demonstrate the required skill level to pass the EWPA course
will be referred back to their Employer / Sponsor for further practical experience.
They may if they wish complete their VQ via an alternative route.
Upon successful completion of Pt1, Pt 2, VQ2, CISRS 1-day Skills test and CITB
H, S & E test or recognised exemption. Trainees can apply for the CISRS Scaffolder
Card (System). The Card will be endorsed with the name of the specific product
in which the training and assessment was undertaken. The card holder may be
deemed a qualified Scaffolder for those products only.
For use of other recognised system scaffolding products, CISRS System
Scaffolders would need to attend a 2-Day System Scaffolding Product Training
Scheme (SSPTS) at an Accredited Centre.
2.3 System Scaffolding Product Training Scheme (SSPTS)
Affiliated
MR A SAMPLE
H&S
TESTED
SCAFFOLDER
PHOTO
System Scaffold Product Training - Layher
System Scaffold Product Training - Kwikstage
S/NVQ Level 2
This 2-day System Scaffolding Product Training Scheme was introduced along with
the CISRS System Scaffolder scheme in recognition of the significant differences
between the various proprietary system scaffolding products covered by CISRS.
The aim of this scheme is to provide Scaffolders with skills and knowledge for safe
use in accordance with the manufacturers’ instructions.
Only CISRS record card holders, who have achieved a minimum of Pt. 1 training
(in either Tube and Fitting or System) are eligible to attend these 2-day training
courses. If the operative has only completed Pt. 1 training they will still be classed
as a Trainee. They may use the specific system they have been trained in, but only
under the direct supervision of a CISRS qualified Scaffolder who also holds that
system endorsement.
16
CISRS courses are available in several
different products. Accredited Training
Centres offering product specific training
can be found in Appendix I.
Attendees who successfully complete the
training and assessment must apply to have
their CISRS record card endorsed with the
name of the specific system scaffold product
on which they have received their training.
If an operative wishes to use a 2nd type
or brand of a similar systems product e.g.
Cuplok and Genlok the employer will be
required to ensure all relevant product
information is passed onto the operative
and that the operative is aware of any
differences in product capability, erection
procedure, tie patterns etc.
This only applies to products/manufacturers
that have submitted all relevant product
information, proof of testing to European
Standards, user guide, erection and
dismantling sequence etc. to CISRS and
a CISRS approved course exists for that
product.
A list of CISRS approved product courses
can be found on the CISRS website:
www.cisrs.org.uk
2.4 Scaffolder Apprenticeships
The Scaffolder Apprenticeship programme
is held over a minimum of 18 months at
participating Accredited Centres. It includes
the training route to qualify as a CISRS
Scaffolder (Tube and Fitting or System) and
VQ Level 2. The Apprenticeship scheme is
structured to allow the trainees more time
to complete the Construction Diploma (DIP
022), attend the practical training courses
and complete VQ. See Figure 2, page 18.
Successful completion of the VQ2 1-dayskills test is a mandatory element of the
CISRS Scaffolder Apprenticeship.
New Entrant Accepted
by Managing Agent
(e.g. CITB)
Trainee Enrolled at an
Approved CISRS Centre
2 Week Foundation
2 Week Part 1A
2 Week Part 1B
CISRS Trainee Card
upgraded to Tube and
Fitting Part 1
2 Week Part 2A
2 Week Part 2B
1 Week Assessment
Part 2 Scaffolder Card
Functional Skills Level 1
Construction Diploma
ERR* & VQ Level 2
Figure 2 Scaffolder Apprenticeship Programme
18
* Employers Rights and Responsibilities
2.5 Basic Access System Erector (BASE)
CONSTRUCTION INDUSTRY
SCAFFOLDERS RECORD SCHEME
BASE (Basic Access Systems Erector) 5 day course
MR A SAMPLE
Expires End Jan 2015
H&S
TESTED
BASIC ACCESS
SYSTEMS ERECTOR
The aim of this 5-day training course is to provide accredited training for nonscaffolders who erect, alter and dismantle simple and routine scaffolding structures
using specific modular system scaffolding.
The course is held over 5 consecutive working days (Monday to Friday).
The aim of this scheme is to provide operatives with limited skills and knowledge
for safe use in accordance with the manufacturers’ instructions within restricted
conditions and environments.
BASE card holders are only permitted to construct simple system scaffold
structures with the product used when completing their CISRS BASE
Training. These structures must not exceed a maximum height of 6m and
must not be in an environment with a general public interface. Any works
exceeding these parameters should be carried out by a CISRS Scaffolder
or CISRS Advanced Scaffolder depending upon the scope of the work.
Upon successful completion of the training the Trainee will be issued with a BASE
Completion Certificate and an application form to apply for a BASE record card
for the specific system scaffolding product they have been trained in. They will
be required to hold a current CITB H, S & E Test or a recognised exemption. The
Accredited Centre will notify CITB of successful completion.
Once an operative has held a BASE card for a 3 year period they could be eligible
to attend a CISRS Systems Scaffold Pt. 2 course. This would be dependent upon
having the relevant experience. The Pt. 2 course would need to be carried out using
the same product e.g. Cuplok that they had completed the BASE course in. Upon
successful completion of a Pt. 2 Systems course, VQ assessment, 1-day skills test
and H,S & E Test they could apply for a System Scaffolders Card.
Please Note: A Basic Access Systems Erector is not a qualified Scaffolder
and as such is prohibited from carrying out any scaffolding operations
outside the limitations of their training course.
19
2.6 Scaffolding Labourer Card
Affiliated
MR A SAMPLE
PHOTO
LIMITED SITE SKILLS ONLY
Expires End Jan 2015
LIMITED SITE SKILLS ONLY
H&S
TESTED
SCAFFOLDING LABOURER
The Scaffolding Labourer record card is available for operatives who carry out
only labouring/driving duties in support of scaffolding operations. Labourers are
only allowed to work at ground level or on a fully boarded and double guard railed
section of a scaffold platform passing scaffolding equipment.
The purpose of the Scaffolding Labourer card is to show that the holder has
both current up-to-date health and safety knowledge, and the relevant industry
skills and knowledge required to carry out his duties in a safe manner.
If the operative is expected to erect, alter or dismantle scaffolding whilst on site they
will need to hold an Advanced Scaffolder, Scaffolder or Trainee card.
There are currently 2 ways of obtaining this card:
I.By experience/industry accreditation. The application form lists
a range of tasks you must be able to do under supervision, to get
your card. Your employer should sign the form to confirm that the
information given is correct.
II.By achieving VQ Level 1 in Accessing and Rigging Operations.
s of 1st September 2013 there will be a requirement to complete a 1-day
A
New Entrant Labourer course prior to the issue of an initial Labourers card.
The New Entrant Labourer course will include:
Servicing of Equipment, Tube, Fittings,
Health, Welfare, Hygiene & Housekeeping.
20
Electrical Safety
Noise & Vibration
Work at Height
Equipment & Tools
Lifting Equipment Using a Rope & Wheel
Operatives wanting to apply for this card must also pass the CITB H, S & E Test or
a recognised exemption. They should apply for their card within 2 years of the test
date or they will have to complete another test.
CISRS Scaffolding Labourer
CISRS New Entrant
1 day course via approved centre or employer (Sept 2013)
Complete
CITB Health, Safety and Environment Test within 2 years
prior to application
Experience / Industry
Accreditation Route *
Submit application
form verified by the
employer
* To be withdrawn 31st August 2013
VQ1 Route
Achieve VQ Level 1
in Access and
Rigging Operations
CISRS Scaffolding
Labourer Card
Figure 3 Overview of Labourer’s Scheme
21
Section 3 – Scaffolding Management & Supervisory Training
3. Scaffolding Management & Supervisory Training
To meet the demands of today’s scaffolding industry; CISRS has identified the need for
management and supervisory training to provide the knowledge and management skills
tailored for contract scaffolding.
Affiliated
MR A SAMPLE
Supervisor Course
H&S
TESTED
SCAFFOLDING SUPERVISOR
3.1
Scaffolding Management and Supervisory Training
The 5-day CISRS Scaffolding Management and Supervisory training is available
from CISRS Accredited Centres. It is aimed at scaffolding contractors’ first-line
supervision (i.e. Contract Managers/Supervisors, Foremen and Non-Working
Chargehands).
The course can be held in block over 5 consecutive days (Monday to Friday) or
in modules of 1-day per week over 5 consecutive weeks. The topics covered
within this course are designed to be comparable to that of SMSTS. The CISRS
Scaffolding Management and Supervisory training is recognised by the UKCG.
The course content includes:
Health and Safety
l Legal Overview – Health & Safety Law
l Health and Safety Management
l HSE ACOP’s and Guidance
Performance Standards
l British and European Standards
l NASC Safety and Technical Guidance
l Design Engineering Appreciation
Employment Basics
l Legal Overview – Employment Law
l Recruitment
l Discipline and Grievance
l Managing Absence
l Managing Conflict and Resolution
22
Section 3 – Scaffolding Management & Supervisory Training
Supervisory Skills
l Planning and Organisation
l Materials and Logistics
l Competence and Allocating Duties
l Effective Supervision
l Commissioning and Handover
l Statutory Scaffold Inspections and Inspection Practices
l Effective Communication
(including basic presentation skills, briefings and toolbox talks)
l Meeting Skills
l Customer Relations
Commercial Essentials
l NASC Commercial Guidance
l Sales, Estimating and Surveying
l Contracts Awareness
l Managing Variations
l Valuations and Payment
l Payment Disputes and Remedies
Risk Assessment Project
Delegates are required to sit a written test and submit a project which contributes
to the overall assessment.
Successful delegates will receive a CISRS endorsed certificate and can apply
for the CISRS Management and Supervisory Card, providing they have passed
the CITB Supervisory Level H, S & E Test within the previous 2 years or hold a
recognised exemption.
Refresher training
As of September 2013, delegates will be required to attend a 2 -day CISRS
Management and Supervisiory refresher course on a 5-year cycle if they wish to
maintain their CISRS status and be eligible to renew their card.
23
Section 4 – Scaffold Inspection Training Scheme (SITS)
4. Scaffold Inspection Training Scheme (SITS)
In order to provide a nationally recognised training qualification, CISRS developed two
new scaffold inspection qualifications. The Basic and Advanced Scaffold Inspection
courses were launched in May 2010.
4.1 Retrospective Training
The issuing of CISRS SITS cards based on non-CISRS retrospective training
ceased in May 2012.
Retrospective Training can still be used as proof of prior learning provided the
applicant has completed a 2-day Basic or Advanced Scaffold Inspection Course,
with an approved CISRS Centre, within 10 years of the date of their application.
When applying for the Advanced course, the applicant must have completed their
training at least two years prior to their application.
4.2 Scaffold Inspection Training Scheme (Basic)
MR A SAMPLE
Registration No:03111097
Scaffold Inspection Course
Health & Safety Tested
Expires End Feb 2015
SCAFFOLD
INSPECTION
The Basic Scaffold Inspection training will be delivered by Approved CISRS
Centres over 2 consecutive days. It will be aimed at anyone who is responsible
for carrying out statutory scaffold inspections in accordance with the Work at
Height Regulations and scaffolders wishing to expand their knowledge of scaffold
inspection. Delegates may include employees from outside of the scaffolding
industry such as Site Managers and Agents, Site Engineers, Health and Safety
Professionals etc. The course will cover basic scaffolding structures and the
fundamental requirements for safe and legally compliant scaffolding.
24
The Basic SITS course will include the following:
l
l
l
l
l
l
l
l
Initial Practical Inspection Session
Relevant Legislation
Relevant Industry technical and Safety guidance
Identification of Scaffold components
Correct Erection procedure
Fault finding
Practical Inspection and Report Writing Assessment
Theory test
The delegate will be required to successfully complete both the practical inspection
and report writing assessment as well as the Theory test in order to pass the course.
4.3 Scaffold Inspection Training Scheme (Advanced)
MR A SAMPLE
Registration No:03111097
Advanced Scaffold Inspection Course
Health & Safety Tested
Expires End Feb 2015
ADVANCED SCAFFOLD
INSPECTION
Industry experience alone does not make a delegate eligible to attend an Advanced
SITS course. They must meet at least one of the following criteria before being
accepted onto the course:
Hold a CISRS Basic SITS card for a minimum of 2 years
Hold a CISRS Scaffolder card for a minimum of 2 years
Hold a CISRS Advanced card
Have attended a retrospective Basic Inspection course, with a CISRS
approved provider, within a 10 year period prior to their application. The
Basic course must be over 2 years old prior to being eligible to attend the
Advanced Course.
Have attended a retrospective Advanced Inspection Course, with a CISRS
provider, within a 10 year period prior to their application.
25
Have attended a BASIC SITS course, following acceptance of historic (over
10 year period) CISRS recognised inspection training.
The requirement for an individual to hold a Scaffold Inspection card for 2
years prior to attending an Advanced SITS course will only apply to New
Entrants. New Entrants are classed as individuals who have not previously
undertaken any Scaffold inspection training or have no evidence of
previous training with an approved CISRS centre.
The 2-day Advanced Scaffold Inspection training will cover both basic and more
complex scaffolding structures. It will be aimed at professional Scaffold Inspectors,
Scaffolding Supervision and Management and others who would be responsible for
statutory scaffold inspection for more complex structures. To be eligible applicants
would need to have extensive scaffolding industry experience and have previously
attended the Basic Scaffold Inspection training course. CISRS Scaffolders,
providing they have held their card for a minimum of 2 years, and Advanced card
holders will be eligible to attend this course without having to initially attend the
SITS (Basic) course.
The Advanced SITS course will include the following:
l
l
l
l
l
l
l
l
l
Initial Practical Inspection Session
Relevant Legislation
Relevant Industry technical and Safety guidance
Identification of Scaffold components
Correct Erection procedure
Reading and Interpretation of Scaffold Drawings
Fault finding
Practical Inspection and Report Writing Assessment
Theory test
4.4 Refresher Training
Delegates will be required to attend/repeat the current 2-day SITS courses (Basic
or Advanced) on a 5 year cycle if they wish to maintain their CISRS status and be
eligible to renew their card.
Those delegates who received a 2 year CISRS SITS card based upon retrospective
training will be required to attend the current SITS course (Basic or Advanced) in
order to renew their card.
4.5 CISRS Scaffolder, Advanced card holders
The stance of both the NASC and CISRS is that CISRS Scaffolders and Advanced
card holders are competent to inspect scaffold structures up to the grade of the
card they hold, based upon completion of their CISRS training and assessment,
and providing their employer can demonstrate they have the necessary knowledge
and experience. This will remain our position until 31st December 2014 at which
point it will become open for review.
26
Section 5 – Vocational Qualification
5. Vocational Qualification
CISRS is committed to vocational qualifications (S/NVQ). Where applicable, training
and assessment under the record scheme supports the achievement of National
Vocational Qualifications NVQ Diploma in Accessing Operations and Rigging
(Construction) (QCF) for England, Wales and Northern Ireland, or Scottish Vocational
Qualifications (SVQ) in Scotland.
Trainees for Scaffolder training and assessment must be registered for VQ. This is
completed through the CISRS Accredited Centres. Registration usually takes place
when the Trainee attends the CISRS Pt. 2 course.
The VQ’s currently applicable under CISRS are:
Level 1Accessing Operations & Rigging - Scaffolding(Construction)Labourers Card
Level 2Accessing Operations & Rigging - Scaffolding(Construction)Scaffolder
Level 3Accessing Operations & Rigging - Scaffolding(Construction)Advanced Scaffolder
Every VQ level has a number of Units that must be achieved. A summary of the VQ
levels and the units required can be found in Appendix G.
All core scheme (Pt. 1, Pt. 2 & Advanced) CISRS Accredited Centres are also
registered VQ assessment centres.
Please note a VQ alone does not entitle an operative to a CISRS Scaffolder or
Advanced Scaffolder Card. The applicant must meet all of the CISRS scheme
requirements which would include CISRS Pt. 1, Pt. 2, VQ2, CISRS 1-day skills
test plus a current H, S & E Test for a CISRS Scaffolder Card and CISRS Pt.1,
Pt.2, Advanced VQ3, CISRS 2-day skills test plus a current H, S & E Test for an
Advanced Card.
As of 1st January 2011 successful completion of the relevant CISRS skills test is a
mandatory element of the CISRS scheme. This is regardless of whether the trainee
has previously achieved his VQ via another route e.g. OSAT. A CISRS card will not be
issued to those who fail to successfully complete their VQ and relevant CISRS skills
test. If a candidate fails the skills test, they must re-sit at a later date after gaining
sufficient experience.
5.1 Work Based Evidence
VQ programmes followed under CISRS are based on the philosophy of train,
gain experience, gather evidence of that experience and then be assessed for
competence.
Trainees are required to compile a portfolio of work based evidence for assessment
against the relevant VQ level. Accredited Centres provide information and advice for
Trainees in gathering work based evidence and assessing the evidence against the
VQ requirements.
27
Section 5 – Vocational Qualification
The onus of gathering evidence and completing the portfolio is with the Candidate.
Employers/Sponsors should assist and support the Candidates by checking
portfolios, offering encouragement and planning work to allow Candidates to gain
the appropriate work experience required.
Candidates are assessed against the VQ at each stage of the Scaffolder training. It
is a requirement of CISRS that the majority of evidence presented must be aligned
with the training carried out. For example, when gathering evidence for the Tube
and Fitting route the portfolio must have examples of works the Candidate has
carried out in Tube and Fitting rather than Systems Scaffold.
5.2 Experienced Worker Practical Assessment (EWPA)
As an alternative to completing VQ portfolios for level 2, Candidates can undertake
a practical assessment and interview, at a participating Accredited Centre. This is
the Experience Worker Practical Assessment (EWPA), where Candidates attend
a 2-day practical assessment to prove they have the skills and knowledge to be
deemed competent.
The successful completion of EWPA would negate the requirement of attendance
and successful completion of the CISRS skills test and VQ assessment.
If the operative fails the EWPA they will be advised by the centre of alternative
methods available for completing their VQ.
To be eligible for EWPA a Candidate must have had a minimum period of 12
months practical experience after completing their CISRS Pt.1 and Pt. 2 training.
EWPA is only currently available at scaffolder Level VQ2.
5.3 On-Site Assessment and Training (OSAT)
Some Candidates may choose to achieve their VQ qualification via the OSAT route.
Please note that this route is not offered by many of the CISRS Accredited Centres.
Achievement of VQ via OSAT does not negate the requirement of attendance
and successful completion of the CISRS skills test. (1-day - Scaffolder, 2-day Advanced Scaffolder)
Section 6 – Record Cards
6. Record Cards
To comply with CISRS, an employer/sponsor must be satisfied that an operative is
suitably qualified by training and experience to be employed on given scaffolding
operations. The level of CISRS training and assessment completed determines the grade
of CISRS card issued.
The record card bears the operative’s name, unique record number and photograph.
Record cards will state the category of the scaffolder (Trainee, Scaffolder or Advanced
etc). The CISRS cards are also embossed with the CSCS logo and the CITB H, S & E
Test Hologram. Each card will also show an expiry date.
The rear of the card will show the route by which the card holder qualified for his CISRS
status. It will also show any systems scaffold endorsements he may have achieved.
A CISRS Record Card is evidence of satisfactory completion of industry approved
training and assessment.
6.1 Applying for a new record card
Application forms are available from CITB, CISRS Accredited Training Centres or by
visiting the website
www.cisrs.org.uk
Telephone CISRS: 0844 815 7223
The completed form should be returned to:
CISRS
PO Box 1055
Bircham Newton
King’s Lynn
Norfolk
PE31 6XQ
Together with the form, the applicant must supply one passport-size colour
photograph, copies of any relevant training certificates (including the CITB H, S & E
Test or a recognised exemption) and payment as stated on the form.
6.2 C
ITB Health, Safety and Environment Test and recognised Exemptions
Prior to the issue or renewal of CISRS records cards it will be necessary to pass the
CITB Health, Safety and Environment Test (H, S & E Test). For the purposes of card
application the H, S & E test will remain valid for a period of 2 years only. If a further
card application is made outside of this period the applicant would be required to
complete a further test.
CISRS do accept some other industry recognised Health and Safety qualifications
as an exemption to the H, S & E test. Those listed below must be completed within
2 years of the date of application.
29
lCompletion
of CISRS Recognised Scaffolding Apprenticeship Induction
(Initial Trainee card only)
lIOSH Working Safely/IOSH Managing Safely/IOSH Directing Safely
l FAS Safe Pass
l NEBOSH (General/Construction/International) H&S Certificate
l SMSTS Certificate
l SSSTS Certificate
Other recognised exemptions
l
Current CCNSG Safety Passport (SCATS)
Current CCNSG Safety Passport Supervisor (SCATS)
l Current MIST/BOSIET/OPITO Approved Offshore Certificate
l
For these exemptions to apply, a copy of the certificate must be attached to the
application form.
Please note when applying for CISRS Management and Supervisory Cards that only
CITB Supervisors H, S & E Test, Management & Professional tests or Supervisory
and Management level exemptions are accepted e.g. CCNSG Supervisor, SSSTS,
SMSTS, NEBOSH, IOSH Managing/Directing Safely.
6.3 Card renewals
In order to maintain their CISRS status, all existing cardholders will be required to
renew their cards in line with scheme rules and timescales.
Cards are required to be renewed at the following frequencies:
l Scaffolding Labourer Cards are valid for 5 years. (As of1st September
2013 the applicant will be required to complete the 1-day CISRS New Entrant
Labourer course in order to be eligible to renew their card)
l Initial Trainee Cards are valid for 18 months. Within this time a trainee must
commence training and successfully complete a minimum of CISRS Pt. 1
Training in order to be eligible to renew their Trainee card.
l 2nd Trainee Cards are valid for 18 months. Trainees would be expected to
complete their Pt. 2, VQ 2 and their CISRS 1-day skills test within this second
18 month period. No further Trainee cards will be issued following the 2nd 18
month period.
l Scaffolder Cards are valid for 5 years. Scaffolders will be required to complete
the CITB H, S & E Test or recognised exemption in order to renew their card.
l Advanced Scaffolder Cards are valid for 5 years. Advanced Scaffolders will
be required to complete the CITB H, S & E Test or recognised exemption in
order to renew their card.
l Scaffolding Management and Supervisory Cards are valid for 5 years (As of
1st September 2013 the applicant will be required to complete a 2-day CISRS
Management and Supervisory Refresher course prior to renewal)
30
l Scaffold Inspection Training Scheme Basic Cards are valid for 5 years
(The applicant is required to resit the CISRS Basic SITS course in order to be
eligible to renew their card)
l Scaffold Inspection Training Scheme Advanced cards are valid for 5 years
(the applicant is required to resit the CISRS Advanced SITS course in order to
be eligible to renew their card)
l Scaffold Inspection Training Scheme cards issued via retrospective training,
are valid for 2 years only. (The applicant is required to resit the CISRS Basic or
Advanced SITS course in order to be eligible to renew their card)*
*This route was closed in May 2012.
Card holders are required to renew cards using the standard application form;
they will be required to have completed the relevant H, S & E Test (or a recognised
exemption), within 2 years of the application date.
CISRS will issue a renewal notice to all existing card holders approximately 3 months
prior to the cards expiry. Renewal notices will be sent to the last known address.
6.4 Upgrading expired CITB/CISRS Cards
Operatives who still hold old style CITB/CISRS cards must apply for re-registration
to the CISRS scheme. They must complete the CITB H, S & E Test (or a
recognised exemption) prior to their new CISRS card being issued.
Anyone wishing to upgrade an old style CITB/CISRS card will be required to
make an appeal in writing to the Scheme Manager to explain why they have failed
to renew their card prior to this date. They will be required to complete CISRS
training, CISRS Skills test (1-day scaffolders, 2-day Advanced Scaffolders) and VQ
assessment in order to gain a CISRS card if their appeal is unsuccessful.
6.5 Lost Cards
If a record card is lost, the operative should contact the CISRS helpline (Tel:
0844 815 7223) for a replacement card. Applications can be made by post using
the application form or by telephone using a credit/debit card for payment. The
replacement card will show the same expiry date as the original.
6.6 Card withdrawal/cancellation
Record cards remain the property of CISRS, who can cancel or withdraw the card if
it becomes apparent it was issued under false pretences.
The CISRS reserves the right to take legal action against any person involved in the
production of fraudulent copies of CISRS cards.
The CISRS reserves the right to withdraw the card of any individual who is
successfully prosecuted by the HSE for contraventions of access/scaffolding health
& safety regulations.
31
6.7 Checking Record Cards
The validity of CISRS cards can be checked by contacting the CISRS helpline.
You will require 3 out of the following 5 pieces of information in order to carry out
a check: CISRS registration number, full name, address, date of birth or National
Insurance number.
By telephone:
0844 815 7223
By post:
CISRS
PO Box 1055
Bircham Newton
King’s Lynn
PE31 6XQ
By email:
[email protected]
Employers who are CITB Registered can use the CITB on line web service called
Phoenix Online to view an individual’s details and achievements at:
www.citb.co.uk/phoenix/home.asp
6.8 ECITB/ECI Skills Database Cards
The ECI Skills Database (also known as the ECITB) has ceased issuing cards
to scaffolders. The ECI Skills database was an entirely separate scaffolder’s
registration scheme to the CISRS. No formal training or assessment was required to
obtain these cards and as such they are not recognised by CISRS.
If an ECI Skills card holder wishes to obtain a CISRS card they would be required
to meet the full CISRS scheme criteria (i.e. Pt 1, Pt. 2, VQ etc), as would any
experienced scaffolder who could not provide evidence of CISRS training.
6.9 Appeals Process
Where a grievance arises over the application of the Record Scheme rules, an
appeal may be made to the Scheme Manager.
In order to be considered there must be reasonable grounds for an appeal.
e.g. An individual has failed to complete the training and assessment programme
within the requisite timescale due to injury/ill health or, an individual has failed to
maintain their CISRS status as they have been working/living outside of the UK.
All appeals must be made in writing (e-mail is acceptable) outlining the grounds of
the appeal and must contain all relevant supporting evidence, e.g. letter from GP or
hospital, proof of employment or residence outside of the UK.
32
All appeals must include the following details (where applicable) which will assist us
in dealing with the appeal in a timely manner.
Full Name
Date of Birth
N.I. Number
CISRS card number (if registered)
Proof of old style CITB/CISRS card (photocopy/scan of card)
Proof of Training Certificates (photocopy/scan of certificates)
Supporting evidence from a CISRS Approved Training provider that training has
taken place, including course details and dates, that VQ portfolios have been
submitted and confirmation that future training/CISRS skills assessments have been
pre booked with the Training provider.
Relevant supporting evidence - letter from GP, DHSS, probationary service or
overseas visa.
An appeal request for a CISRS card based upon industry experience alone,
membership to an alternative card scheme or the achievement of a VQ in isolation,
would not constitute valid grounds for an appeal and as such would not be
considered.
Please forward appeals to:
CISRS 4th Floor
12 Bridewell Place
London, EC4V 6AP
Alternatively by email to: [email protected]
In the first instance, appeals will be considered by the Scheme Manager. Any further
appeal may be reviewed by an Appeals Panel, made up of relevant industry parties,
with an employer and/or a union representative. Their decision will be final.
33
BUILD
Appendix E
Y
T
E
F
A
S
HING
INTO EVERYT
YOU DO
Our CISRS Onsite Accreditation
allows us to carry out training
throughout the UK.
CISRS SSPTS
(System Scaffold Product Training Scheme)
CISRS BASIC SITS
(Scaffold Inspection Training Scheme)
call
| 0800 587 5224
email | [email protected]
visit
| www.generationhireandsale.co.uk
Glasgow • Gateshead • Durham • Wakefield • Liverpool • Birmingham • Stevenage • London
Part of the Altrad Group
Section 7 – Grant Aid and Training Funding
7. Grant Aid and Training Funding
CITB levy registered employers are entitled to claim grants for CISRS training and
assessments schemes.
There may also be funding available for CISRS training and assessment through
other sources.
For more information regarding grant and funding assistance contact:
lCITB
website
www.citb.co.uk
lCITB
Company Development Advisor via your regional CITB office.
See the website at – www.citb.co.uk
l
7.1
CISRS Accredited Training Providers (see Appendix I)
CITB Grants available 2013 (CISRS Adult)
This grant information was correct at the time of printing).
Part 1
Attendance Grant @ £50 per day (5 days max)
£250
Part 2
£250
VQ Level 2
Achievement Grant
£400
Advanced
£250
VQ Level 3
Achievement Grant
£400
Total = £1550
7.2 CITB Grants available 2013 (CISRS Apprenticeship)
Additional funding may be available for apprenticeship training contact CITB or a
CISRS Accredited Training Centre for further details.
35
Appendix F
36
Appendix A
Appendix A
Training Objectives – Trainee Scaffolder (Pt. 1) Course – Tube and Fitting
Overall Objectives
1.
The 2-week Pt. 1 course will cover the following elements:
lHealth
and Safety Awareness comparable to SSSTS, including Legislation,
regulations, best practice, tool box talks
l½ Day Instruction/Training SG4
lInterpretation of drawings
lTie Methods and TG4
l Independent tied scaffold (in tube and fitting and in an approved system)
lPutlog scaffold
lBirdcage scaffold
lStatic Tower
lAluminium Towers
lAlterations to scaffolds (e.g. dropping lift height on independent)
l50 Question Test Paper (include intermediate test at the end of 1st week)
2.The trainee operative will be able, as a member of a team, to erect, alter and
dismantle the above scaffold structures safely and in their correct sequence.
Note:
Trainee Scaffolders should not be carrying out any work unless under the direct
supervision of a CISRS qualified scaffolder.
A Trainee Scaffolder cannot lead or supervise a scaffolding gang in any work
operations.
An operative is considered a trainee until they have completed Pt. 1, Pt. 2, VQ
Level 2, 1-day CISRS skills test and the H, S & E Test, regardless of their time in
the industry.
Detailed Training Objectives
Knowledge
At the end of the course, the trainee operative should have knowledge of:
1.Statutory regulations and safety requirements (including SG4) relating to the erection
and dismantling of simple scaffolds.
2.The types, uses and purposes of scaffold tubes, boards and fittings in common
use.
3.The methods of handling and stacking scaffold tubes, boards and fittings, and the
inspection procedures.
37
Appendix A
4.The methods of founding scaffolds on three types of surface (ground, concrete and
steel).
5.The correct and safe means of attaching and staggering joints, and the spacing of
standards and ledgers to form scaffold frames.
6.The types, methods and spacing requirements for attaching bracing to the various
scaffold structures.
7.The correct and safe means of attaching and spacing transoms to support working
platforms and strengthen the scaffold structure.
8.The basic tying pattern for un-sheeted scaffolds and moveable and non-moveable
tie arrangements.
9.The dimensional requirements of working platforms to comply with the Work at
Height Regulations.
10.The statutory requirements for access including ladders, and ladder towers and
stairways.
11.The methods of carrying, raising, lashing, securing, stacking and lowering pole
ladders, and the methods of inspection.
12.The regulations governing inspection of scaffolds.
13.The correct and safe methods of erecting independent and putlog scaffolds with
returns, towers and birdcages at three lifts high in tube and fittings.
14.The types, uses and methods of inspection, and the correct and safe method of
fixing and operating gin wheels.
Skill
At the end of the course, the trainee operative should be able to correctly and
safely:
1.Carry out work in compliance with statutory regulations, and having regard for their
own safety (particularly in relation to collective and personal fall prevention and the
use of other PPE where appropriate), the safety of the workforce, and the public
and future users of the scaffold.
2. Identify scaffold tubes, boards and fittings in common use.
3.Select serviceable scaffold tubes, boards and fittings for use; and stack, carry and
raise scaffold materials to and on the working platform correctly and safely.
4. Prepare the base of a scaffold to prevent sinking and slipping of the standards.
38
Appendix A
5.Select, measure, set out and erect standards and ledgers within recommended
tolerances.
6. Select and fit appropriate tubes and fittings to form bracing and stiffen scaffolds.
7.Support scaffold boards to form working platforms and install sufficient transoms to
stiffen the scaffold structure.
8. Install tie arrangement to basic scaffolds.
9.Erect scaffolds of the correct dimensions to provide working platforms conforming
to current Regulation and industry best practice.
10. Provide safe and suitable access for operatives to the working platform.
11.Inspect pole ladders for serviceability. Carry, raise, lash, secure and lower pole
ladders.
12. Inspect scaffolds prior to handover.
13.Determine the material requirements for independent and putlog scaffolds with
returns, towers and birdcages up to three lifts high. Lay out materials, set out
scaffolds and overcome obstacles to erect scaffolds safely.
14.Inspect gin wheels for serviceability, position and fix securely, reeve, rope, tie knots
and correctly use gin wheel to haul up scaffold tubes, boards and fittings. Take
down gin wheel and coil rope.
39
Appendix B
Appendix B
Training Objectives – Scaffolder (Pt. 2) Course – Tube and Fitting
Overall Objectives
1. The 2-week Pt. 2 course will cover the following elements:
l
½-Day Instruction/Training SG4
regulations, best practice, tool box talks
Basic Independent Tied Scaffold
Truss-out Scaffold
Scaffolds with prefabricated beams
Protective fans
Pavement gantry
Loading Bay
Roof saddle scaffold
Splay Scaffold
Aluminium Towers
Roof Edge Protection
TG4 Tie Testing
Tool box talks
Alterations (e.g. removing standards from a structure)
50 Question Test Paper (include intermediate test at the end of the 1st week)
lHealth
l
l
l
l
l
l
l
l
l
l
l
l
l
2. The trainee operative will be able to interpret scaffold drawings.
dismantle the above scaffolds safely and in their correct sequence.
4.The ‘Scaffolder’ grade is the established trade competency for the scaffolding
industry and enables scaffolders to lead or partake in the majority of scaffolding
operations, as covered by this training and assessment.
Note:
Trainee Scaffolders should not be carrying out any work unless under the direct
supervision of a CISRS qualified scaffolder.
operations.
Level 2, 1-day CISRS skills test and the H, S & E Test regardless of their time in
the industry.
CISRS Scaffolder 1-day skills test
As of 1st January 2011 successful completion of the 1-day skills test is a mandatory
element of the CISRS scheme. This is regardless of whether the trainee has previously
40
Appendix B
achieved his VQ via another route e.g. OSAT. A CISRS card will not be issued to those
who fail to successfully complete the 1-day skills test. If a candidate fails the skills test,
they must re-sit at a later date after gaining sufficient experience.
Knowledge
1.The relevant British and European Standards, NASC guidance and statutory
regulations applicable to the correct and safe erection and dismantling of scaffolds
listed in the overall objectives.
2.The types, uses and methods of inspection, and the purpose of various scaffold
tubes, boards and fittings in common use.
3.The types, uses and purposes of prefabricated beams, and the rules for their
assembly and connection to scaffold frames.
4.The purpose, types, uses and loadings of protection fans. The methods of
supporting fans by scaffold tubes and wire ropes.
5.Local Authority rules for the erection of scaffolds on pavements and public places to
ensure protection of the public.
6.The correct methods of attaching spurs, rakers, check fittings, droppers and
puncheons to scaffolds.
7. The safe and correct method of erecting and dismantling Aluminium towers.
8.The methods of attaching anchor bolts and specialist fixings to provide ties for
scaffolds and testing in accordance with NASC Guidance TG4.
9.How to calculate the number of ties and the spacing required to restrain sheeted
and unsheeted scaffolds depending on the capacity of the tie arrangements.
10. The regulations governing the inspection of Basic scaffolds.
11.How to interpret design layout drawings and determine the correct and safe
methods of erecting and dismantling the scaffolds listed in paragraph 1 of the
overall objectives.
12. How to organise men and materials to lead a gang of Scaffolders carrying out
Scaffolding operations.
41
Appendix B
Skill
At the end of the course, the trainee operative should be able to correctly and safely:
1.Make adequate provision for the safety of themselves, the workforce, the public
affected by scaffolding work, and future users of the scaffold structure by working
to the relevant British and European Standards, NASC guidance and statutory
regulations.
2.Select serviceable scaffold tubes, boards and fittings. Use them correctly and
safely.
3.Select, inspect assemble and install prefabricated beams into and onto scaffold
structures.
4.Support scaffold protection fans according to requirements of current industry
practice.
5.Erect scaffolds on pavements and public places safely and correctly, with regard to
Local Authority regulations.
6.Install spurs and rakers within the correct operating angles. Attach check fittings,
droppers and puncheons in the correct positions to scaffolds.
7.Install anchor ties and other specialist fixings to the manufacturer’s
recommendations. Testing and reporting in accordance with TG4.
8.Select, space and install the correct amount of ties to restrain sheeted and
unsheeted scaffolds in unexposed areas, to current industry practices.
9.Determine the materials required to set out, erect and dismantle in a safe sequence
the scaffolds listed in paragraph 1 of the overall objectives.
10. Inspect Basic scaffolds prior to handover.
11.Have the skills to lead a Scaffold gang carrying out Scaffolding Operations.
42
Appendix C
Appendix C
Advanced Scaffolder Course – Tube and Fitting
Overall Objectives
1. The 2 week advanced course will cover the following elements:
l
½ Day Instruction/Training SG4
lHealth and Safety Awareness comparable to SSSTS, including Legislation,
regulations, best practice, tool box talks etc
l
Tubular drop scaffold from steelwork
l
Cantilever drop scaffold
l
Two-way shore/dead shore/raking shore
l
Temporary roof scaffold
l
Stairways
l
Aluminium Towers
l
Risk Assessment
l
Method Statements
lTesting of Ties
Tool Box Talks
l
50 Question Test Paper (include intermediate test at the end of the 1st week
2.Upon qualification at Advanced Scaffolder level the operative will be able to interpret
complex design drawings.
3.The operative will be able, as a member of a team, to erect, alter and dismantle the
above scaffolds safely and in their correct sequence.
4.The operative will be suitably qualified to lead operations as a charge hand in a
scaffold gang carrying out all types (Basic and Advanced) of scaffolding works.
Advanced scaffolder CISRS 2-day skills test
element of the CISRS scheme. This is regardless of whether the operative has previously
achieved his VQ via another route e.g. OSAT. A CISRS card will not be issued to those
who fail to successfully complete the 2-day skills test.
Training Objectives
Knowledge
At the end of the course, the operative should have knowledge of:
1.The relevant British Standards, Codes of Practice and statutory regulations
applicable to the correct and safe erection and dismantling of scaffolds.
2.The correct and safe method of erecting and dismantling drop scaffolding off steelwork.
43
Appendix C
3.The correct and safe method for the erection and dismantling of cantilever drop
scaffolds. Including overturning moments, safety factors, counterbalance etc.
4. The correct and safe method for the erection and dismantling of shoring structures.
5. The safe and correct method of erecting and dismantling Temporary Roof Scaffolds
6. The safe and correct method of erecting and dismantling staircases and ramps.
7.
The safe and correct method of erecting and dismantling Aluminium towers.
8.How to interpret scaffolding drawings and specifications for the structures listed in
paragraph 1 of the overall objectives.
9. The regulations governing the inspection of Advanced structures.
10.How to organise men and materials to lead a gang of Scaffolders carrying out
Advanced Scaffolding operations.
Skill
At the end of the course, the operative should be able to correctly and safely:
1.Make provisions for the safety of themselves, the workforce, the public affected
by scaffolding work, and future users of the scaffold structure by working to the
relevant British Standards, Codes of Practice and statutory regulations.
2.Determine the materials required for drop scaffolding off steelwork. Lay out
materials. Set out and erect drop scaffolding off steelwork. Dismantle a tubular
hanging scaffold.
3.Erect cantilever scaffolds applying appropriate weights with due regard to the safety
measures required to prevent overturning.
4.Determine the materials required for shoring structures. Lay out materials. Provide
a means of access. Set out and erect shoring structures. Dismantle shores and,
where applicable, the means of access.
etermine the material requirements for Temporary Roof Scaffolds in accordance with
5. D
drawings and specifications. Lay out materials. Set out and erect Temp Roof Scaffolds
including levelling to reasonable tolerances. Dismantle Temp. Roof Scaffolds.
6.Determine the material requirements for staircases and ramps in accordance with
drawings and specifications. Lay out materials. Set out and erect Staircase/ramp.
Dismantle Staircase/Ramp.
7.Read scaffold drawings and erect scaffolds from those drawings and specifications
as listed in paragraph 1 of the overall objectives.
8. Inspect Advanced scaffolds prior to handover.
9.Have the skills to lead a Scaffold gang carrying out Advanced Scaffolding
Operations.
44
Appendix D
Appendix D
Appendix D
Training Objectives – Trainee Scaffolder (Pt. 1) Course – System Scaffolding
Overall Objectives
1.
The 2-week Pt. 1 course will cover the following elements:
l
½-Day Instruction/Training SG4
lHealth and Safety Awareness comparable to SSSTS, including Legislation,
l
Manufacturers Instructions
l
Interpretation of drawings
l
Tie Methods and TG4
l
Independent tied scaffold
l
Birdcage scaffold
l
Static Tower
l
Aluminium Towers
l
Stairway
l
Alterations to scaffolds (e.g. dropping lift height on independent)
l
50 Question Test Paper (include intermediate test at the end of 1st week)
dismantle the above scaffold structures safely and in their correct sequence.
Note: Trainee Scaffolders should not be carrying out any work unless under the
direct supervision of a CISRS qualified scaffolder.
operations.
level 2, 1-day CISRS skills test and the H, S & E test regardless of their time in
the industry.
Knowledge
1.Statutory regulations, manufacturers instructions and safety requirements (including
SG4) relating to the erection and dismantling of simple scaffolds.
2.The types, uses and purposes of the various components specified by the original
manufacturer.
3.The methods of handling and stacking system scaffold components, and the
inspection procedures.
46
Appendix D
4.The methods of founding system scaffolds on three types of surface (ground,
concrete and steel).
5.The correct and safe means of setting out and connecting, standards, ledgers
and transom in accordance with the manufacturers recommended sequence of
erection.
6.The types, methods and frequency requirements for attaching bracing to the
various scaffold structures in accordance with the manufacturers instructions.
7.The correct and safe means of supporting decking/boarding to working platforms
and strengthen the scaffold structure in accordance with the manufacturer’s
instructions.
8.The basic tying pattern for un-sheeted scaffolds and moveable and non-moveable
tie arrangements.
9.The dimensional requirements of working platforms to comply with the Work at
Height Regulations.
10.The statutory requirements for prescribed methods of access including ladders, and
ladder towers and proprietary stairways.
11.The methods of carrying, raising, lashing, securing, stacking and lowering pole
ladders, and the methods of inspection.
12. The regulations governing inspection of scaffolds.
13.The correct and safe methods of erecting basic independent scaffolds with returns,
towers and birdcages, stairways and adaptions, in proprietary system scaffolds.
14.The types, uses and methods of inspection, and the correct and safe method of
fixing and operating gin wheels.
Skill
safely:
1.Carry out work in compliance with statutory regulations, and having regard for their
own safety (particularly in relation to collective and personal fall prevention and other
PPE where appropriate), the safety of the workforce, and the public and future
users of the scaffold.
2.Identify components and their use in accordance with the manufacturer’s
recommendations.
3.Select serviceable components for use; and stack, carry and raise scaffold
materials to and on the working platform correctly and safely.
47
Appendix D
4.Prepare the base of a system scaffold to prevent sinking and slipping of the
standards.
5.Select, measure, set out and erect base in accordance with the manufacturers
recommended sequence of erection.
6. Select and fit appropriate components to form bracing and stiffen scaffolds.
7.Construct and Board/deck working platforms in accordance with the manufacturer’s
instructions.
8. Install tie arrangement to basic system scaffolds.
9.Erect scaffolds of the correct dimensions to provide working platforms conforming
to the Regulations and the manufacturers instructions.
10. Provide safe and suitable access for operatives to the working platform
11.Inspect pole ladders for serviceability. Carry, raise, lash, secure and lower pole
ladders.
12. Inspect scaffolds prior to handover.
13.Determine the material requirements for erecting basic independent scaffolds with
returns, towers, birdcages, stairways and adaptions to proprietary system scaffolds.
Lay out materials, set out scaffolds and overcome obstacles to erect scaffolds
safely.
14. Use suitable materials to adapt proprietary system scaffold structures.
15.Inspect gin wheels for serviceability, position and fix securely, reeve, rope, tie knots
and correctly use gin wheel to haul up scaffold tubes, boards and fittings. Take
down gin wheel and coil rope
48
Appendix E
Appendix E
Scaffolder (Pt. 2) Course – System Scaffolding
Overall Objectives
1. The 2-week Pt. 2 course will cover the following elements:
l
½ Day Instruction/Training SG4
Manufacturers Instructions
Basic Independent Tied Scaffold
Truss-out Scaffold
Scaffolds with prefabricated beams
Protective fans
Pavement gantry
Loading Bay
Roof saddle scaffold (in tube & fitting if not applicable to the system)
Splay Scaffold
Roof Edge Protection
Aluminium Towers
TG4 Tie Testing
Alterations (e.g. removing standards from a structure)
50 Question Test Paper (include intermediate test at the end of the 1st week)
lHealth
l
l
l
l
l
l
l
l
l
l
l
l
l
l
2. The trainee operative will be able to interpret scaffold drawings.
dismantle the above scaffolds safely and in their correct sequence.
4.The ‘Scaffolder’ grade and VQ2 assessment is the established trade competency
for the scaffolding industry and enables scaffolders to lead or partake in the majority
of scaffolding operations, as covered by this training and assessment.
Note: Trainee Scaffolders should not be carrying out any work unless under the
direct supervision of a CISRS qualified scaffolder.
operations.
Level 2, 1-day CISRS skills test and the H, S & E test regardless of their time in
the industry.
CISRS Scaffolder 1-day skills test
element of the CISRS scheme. This is regardless of whether the trainee has previously
49
Appendix E
achieved their VQ via another route e.g. OSAT. A CISRS card will not be issued to those
who fail to successfully complete the 1-day skills test. If a candidate fails the skills test,
they must re-sit at a later date after gaining sufficient experience.
Knowledge
1.The relevant British and European Standards, Manufacturers Instructions, NASC
guidance and statutory regulations applicable to the correct and safe erection and
dismantling of the system scaffolds listed in the overall objectives.
2.The types, uses and methods of inspection, and the purpose of the various
proprietary system scaffold components used.
3.The types, uses and purposes of pre-fabricated beams, and the rules for their
assembly and connection to scaffold frames. Also alternative methods for creating
openings specified by the manufacturer e.g. using braces.
4.The purpose, types, uses and loadings of protection fans. The methods of
supporting fans, as per manufacturer’s recommendations and by traditional means
using scaffold tubes and wire ropes.
5.Local Authority rules for the erection of scaffolds on pavements and public places to
ensure protection of the public.
6.The correct methods of attaching spurs, rakers, check fittings (if necessary),
droppers and puncheons to scaffolds.
7. The safe and correct method of erecting and dismantling Aluminium towers.
8.The methods of attaching anchor bolts and specialist fixings to provide ties for
scaffolds and testing in accordance with NASC Guidance TG4.
9.How to calculate the number of ties and the spacing required to restrain sheeted
and un-sheeted scaffolds depending on the capacity of the tie arrangements and in
accordance with the manufacturers’ recommendations.
10.How to interpret design layout drawings and determine the correct and safe
methods of erecting and dismantling the scaffolds listed in paragraph 1 of the
overall objectives.
11. The regulations governing the inspection of Basic scaffolds.
12.How to organise men and materials to lead a gang of Scaffolders carrying out
Scaffolding operations.
50
Appendix E
Skill
safely:
1.Make adequate provision for the safety of themselves, the workforce, the public
affected by scaffolding work, and future users of the scaffold structure by working
to the relevant British and European Standards, Manufacturers’ Instructions, NASC
guidance and statutory regulations.
2. Select serviceable components. Use them correctly and safely.
3.Select, inspect assemble and install prefabricated beams into and onto scaffold
structures.
4.Support scaffold protection fans according to requirements of the manufacturer and
current industry practice.
5.Erect scaffolds on pavements and public places safely and correctly, with regard to
Local Authority regulations.
6.Install spurs and rakers within the correct operating angles. Attach check fittings,
droppers and puncheons in the correct positions to scaffolds.
7.Install anchor ties and other specialist fixings to the manufacturer’s
recommendations. Testing and reporting in accordance with TG4.
8.Select, space and install the correct amount of ties to restrain sheeted and unsheeted scaffolds in unexposed areas, to current industry practices.
9.Determine the materials required to set out, erect and dismantle in a safe sequence
the system scaffolds listed in paragraph 1 of the overall objectives.
10.Inspect Basic scaffolds prior to handover.
11.Have the skills to lead a Scaffold gang carrying out Scaffolding Operations provided
their employer can demonstrate they have the necessary experience.
51
Appendix F
Appendix F
Training Objectives – System Scaffold Product Training Scheme
Overall Objectives
1. The 2-Day Product Training covers the following:
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Introduction, welcome and registration
Basic Product Information and Manufacturers Instructions
Legal Overview – Health and Safety
British & European Standards
Overview of Product Accreditation and Testing Schemes (e.g. BSI Kite mark)
Guidance and Industry Standards
Component Range
Basic system(s) of work
Bracing Requirements
Ties, Stability and Tie Patterns
Loading & Duties
Access Towers – Theory & Practical
Independent Tied Scaffolds (including returns and hop-ups) – Theory & Practical
Birdcage Access Scaffolds – Theory & Practical
Loading Towers – Theory & Practical
Methods of Access and Egress (including stairways) – Theory & Practical
Test Paper
Summary, Course Evaluation & Close
2.The trainee will be able to use the specific system scaffold product in accordance
with the requirements of the Work at Height Regulations, the manufacturers
instructions and industry standards, including NASC Guidance Notes.
Note:
This training is only available to existing CISRS Record Card Holders who
have attended a minimum of a Pt. 1 Training course. If the operative has only
completed Pt. 1 training they will still be classed as a Trainee. They may use the
specific system they have been trained in, but only under the direct supervision
of a CISRS qualified Scaffolder who also holds that system endorsement.
If an operative wishes to use a 2nd type or brand of a similar brand or similar systems
product e.g. Cuplok and Genlok the employer will be required to ensure all relevant
product information is passed onto the operative and that the operative is aware of any
differences in product capability, erection procedure, tie patterns etc.
This only applies to products/manufacturers that have submitted all relevant product
information, proof of testing to European Standards, user guide, erection and dismantling
sequence etc. to CISRS and an approved training course is in place.
52
Appendix G
Layher’s scaffolding,
protection and access
training packages…
…designed to help you make the most of your
investment. Safely and profitably.
EQUIPMENT
DESIGN
SUPPORT
CISRS approved training provider
EXPERIENCE
VERSATILITY
EXPERTISE
Layher Limited, Works Road, Letchworth, Herts. SG6 1WL Tel. 01462 475100 Fax. 01462 475101
Layher Limited, Letham Road, Houstoun Industrial Estate, Livingston, West Lothian EH54 5BY Tel. 01506 440220 Fax. 01506 440110
[email protected] www.layher.co.uk
Z-8.22.64 and Z-8-22-64.1
07 P
VGS-L 10
53
Appendix G
Appendix G
NVQ Diploma in Accessing Operations and Rigging (Construction) (QCF)
LEVEL 2
QCF 641 Conforming to General Health and Safety in the Workplace
QCF 642 Conforming to Productive Workplace Practices in the Workplace
QCF 643 Moving and Handling and Storing Resources in the Workplace
QCF 247 Erecting and Dismantling Independent and Birdcage Scaffolds in the
Workplace
QCF 248Erecting and Dismantling Mobile and Static Scaffold Towers in the
Workplace
QCF 249 Erecting and Dismantling Cantilever Scaffolds in the Workplace
QCF 251 Erecting and Dismantling Pavement or Roof Scaffolds in the Workplace
QCF 252EUtilising Provision of Fall Protection Systems and/or Equipment in the
Workplace
NVQ Diploma in Accessing Operations and Rigging (Construction) (QCF)
LEVEL 3
QCF 01 Conform to General Health, Safety and Welfare in the Workplace
QCF 209 Conforming Work Activities and Resources for an Occupational Work area in
the Workplace
QCF 210Developing and Maintaining Good Occupational Working Relationships in
the Workplace
QCF 211 Confirming the Occupational Method of Work in the Workplace
QCF 252A Utilising Provision of Fall Protection Systems in the Workplace
QCF 405 Erecting Specialised, Designed Scaffolds and Rigging in the Workplace
Level 3 - Aditional units
QCF 406 Erecting and Dismantling Overhead Scaffolds in the Workplace
QCF 407 Erecting and Dismantling Falsework Scaffolds in the Workplace
QCF 408 Erecting and Dismantling Shoring Scaffolds in the Workplace
QCF 411 Inspecting Scaffolding and Rigging Ststems in the Workplace
QCF 609 Erecting and Dismantling Temporary Roof Scaffolds in the Workplace
Notes
All candidates attending Pt. 2 and Advanced courses are required to register
and complete the relevant S/NVQ.
Although SVQ unit numbers differ from England, Wales and Northern Ireland, the
unit content is the same.
54
Appendix H
Appendix H – Useful Contacts
CISRS
4th Floor
12 Bridewell Place
London
EC4V 6AP
For card enquiries / applications
Construction Industry Scaffolders Record Scheme (CISRS)
PO Box 1055
Bircham Newton
King’s Lynn
Norfolk
PE31 6XQ
CISRS Scaffolding Helpline
Tel. 0844 815 7223
[email protected]
www.cisrs.org.uk
To book a CITB Health, Safety and Environment Test
go to www.citb.co.uk
alternatively
Tel. 0344 994 4488
55
Appendix I
Appendix I – CISRS Accredited Training Providers
SCOTLAND and NORTHERN IRELAND
CITB-ConstructionSkills – Northern Ireland
17 Dundrod Road, Crumiln, Co. Antrim, Northern Ireland, BT29 4SR
Tel. 02890 825 466 www.citbsni.org.uk
Excel Training International
St. Mirren Business Park, Greenhill Road, Paisley, PA3 1RU
Tel. 0141 416 2199 www.excel-td.co.uk
Muehlhan Training Services - Paisley
10 East Lane, Paisley PA1 1QA
Mobile: 07791 553333 www.muehlhantraining.com
National Construction College (Scotland)
4 Fountains Way, Inchinnan Business Park, Inchinnan, Renfrewshire, PA4 9RQ
Tel. 0344 994 8800 / Course Bookings 0844 844 0466 www.citb.co.uk
NORTH and NORTH WALES
Astra Access Safety Training Ltd
National Access Skills Academy, Unit 3, Junction 38 Business Park, Huddersfield Road,
Darton, Barnsley, S75 5QQ
Tel: 0800 1214951 www.astratraining.co.uk
Generation Training Services
Unit 20B, Green Industrial Park, Calder Vale Road, Wakefield, WF1 5PH
Tel: 0800 587 5224
Interserve Industrial Services Ltd
Unit 2, Olympic Park, Poole Hall Road, Ellesmere Port, Chester, CH66 1ST
Tel: 0151 373 7660 www.interserve.com
Lawson Training Ltd
Whinbank Farm, Distington, Workington, Cumbria, CA14 4QH
Tel.01946 833313 www.lawsontraining.co.uk
The Manchester College
Ashton Old Road, Openshaw, Manchester, M11 2WH
Tel.0161 920 2609 www.themanchestercollege.ac.uk
NETA Training Group
Pennine Avenue, North Tees Industrial Estate, Stockton-on-Tees, Cleveland, TS18 2RJ
Tel. 01642 616 936 www.neta.co.uk
56
Appendix I
Safety and Access Ltd
Humberside Training Centre, CATCH, Redwood Park Estate, Stallingborough,
NE Lincolnshire, DN14 8TH
Tel.01469 552 848 www.safetyaccess.co.uk
Simian Skill Ltd
Wallis House, Birchwood Park, Warrington, WA3 6FW
Tel. 0845 602 2418 www.simian-risk.co.uk
Training 2000
Furthergate Business Park, Harwood Street, Blackburn, Lancashire, BB1 3BD
Tel.01254 54659 / 586535 www.training2000.co.uk
MIDLANDS
National Construction College (Midlands)
83 Lifford Lane, Kings Norton, Birmingham, B30 3JH
Tel. 0121 459 4262 / Course Bookings 0300 456 5620 www.citb.co.uk
Safety & Access Ltd
Dabell Avenue, Blenheim Industrial Estate, Bulwell, Nottingham, NG6 8WA
Tel. 0115 979 4523 www.safetyaccess.co.uk
London and South East
CHSG
Construction Health & Safety Group,
John Ryder Training Centre, St Ann’s Road, Chertsey, KT16 9DG
Tel. 01932 561 871/563 121 www.chsg.co.uk
Layher Ltd
Works Road, Letchworth, Hertfordshire, SG6 1WL
Tel. 01462 475 100 www.layher.co.uk
National Construction College (South)
Manor Road, Erith, Kent, DA8 2AD
Tel: 01322 349 638 / Course Bookings 0844 844 0466 www.citb.co.uk
National Construction College (East)
Bircham Newton, Kings Lynn, Norfolk, PE31 6RH
Tel: 01485 577 724 / Course Bookings 0844 844 0466 www.citb.co.uk
National Construction College (Waltham Forest)
Hollydown Way, Leytonstone, London, E11 4DD
Tel: 0208 539 8729 / Course Bookings 0844 844 0466
www.citb.co.uk
57
Appendix I
South West and South Wales
LTC Training Services
Wixenford Depot, Colesdown Hill, Plymouth, PL9 8AA
Tel. 01752 485303 www.ltcaccess.co.uk
WCTS Building Services Limited
Unit 7 Curran Road Industrial Estate, Cardiff Bay CF10 5DF
Tel. 01656 331261 / 07875 555315
International
Cape East (Philippines) 6th Floor. NOL Tower, Commerce Avenue, Madrigal Business
Park, Ayala Alabang Mutinlupa City 1780 Metro, Manila, Philippines
Tel. +63 02 809 9000 www.capeplc.com
Note:
CAPE East operates an Accredited CISRS Centre in the Philippines.
This list of CISRS Accredited Training Providers is current at the time of printing.
Some centres do not operate the full range of CISRS courses, please consult the website
www.cisrs.org.uk or contact the centre directly to confirm which courses are offered.
Contact centres directly in order to book a course.
58
CONSTRUCTION
INDUSTRY SCAFFOLDERS
RECORD SCHEME
MWdjje][jjej^[jef_diYW\\ebZ_d]5
J>;DOEKÊBBD;;:FHEF;HJH7?D?D=
9?IHI>[bfb_d[0&.**.'+-(();cW_b0[dgk_h_[i6Y_ihi$eh]$ka
mmm$Y_ihi$eh]$ka
The Access Industry Safety Experts….
Services Offered
Clients Include
CISRS Skills & Management Training
Health & Safety Executive (HSE)
C. Skills SSSTS/SMSTS/Operative
Total
Retained Health & Safety Consultancy
Willmott Dixon Group
Independent Scaffold Inspections
Kier Group
UKATA Asbestos Awareness Training
Esso
General Health & Safety Training
Brookfield Multiplex
International Training & Consultancy
Mace Group
Nottingham - Grimsby - United Arab Emirates
Visit our new website at www.safetyaccess.co.uk
Safety & Access, Dabell Avenue, Blenheim Industrial Estate, Bulwell, NOTTINGHAM, NG6 8WA
Tel: 0115 979 4523 Email: [email protected]
Appendix J
Appendix J – List of CISRS courses that are
available in the following System Scaffolding
Products
Product Name
Manufacturer
Cuplok
Harsco Infrastructure Services Ltd
DSL Climastage
Deborah Services Ltd
Genlok
Generation (UK) Ltd
Genuine Kwikstage
Interserve Industrial Services Limited
Haki Universal
HAKI Limited
K-LOK
George Roberts Ltd.
Layher Allround
Layher Limited
Peri Up Rossett Flex
Peri Ltd
Plettac
Altrad
Scaffom Ringscaff
Scaffom Rux
TRADlok
TRAD Hire & Sales Ltd
Turner Plus Eight
Turner OCTO
Turner Access
Note
This list of CISRS Recognised System Scaffolding products is current at the time of
printing. Check the website www.cisrs.org.uk for an up to date list.
60
Layher’s fast, versatile Allround
modular scaffold system.
Design flexibility and full system integration –
enhancing project safety, scheduling
and profitability, every time.
EQUIPMENT
DESIGN
SUPPORT
CISRS approved training provider
EXPERIENCE
VERSATILITY
EXPERTISE
Layher Limited, Works Road, Letchworth, Herts. SG6 1WL Tel. 01462 475100 Fax. 01462 475101
Layher Limited, Letham Road, Houstoun Industrial Estate, Livingston, West Lothian EH54 5BY Tel. 01506 440220 Fax. 01506 440110
[email protected] www.layher.co.uk
Z-8.22.64 and Z-8-22-64.1
07 P
VGS-L 10
CISRS, 4th floor, 12 Bridewell Place, London EC4V 6AP
Tel: 020 7822 7400 Fax: 020 7822 7401
www.cisrs.org.uk

CAP 609 General information booklet

Transcription

Similar documents

full profile - Woodbuffalo.net

Project Profile: Suncor - Fort McMurray

Construction Industry Scaffolders Record Scheme

Homebuilder Scaffold Catalog

scaffolding and formwork division - Al

high quality scaffolds, access and hoist solutions

alum-a-pole basic system guideline

aluminum scaffolding poles