2011 Retail Catalogue - Service

Transcription

GB
Product Catalogue 2011
Contents
Corporate setup
4
Chain saws and pruners
Logsplitters
Hedgetrimmers
Blower/Vacuum cleaners Bioshredders
7
25
33
37
43
Multimate combined system Brushcutters
Lawnmowers
Scarifiers
Wheeled Brushcutters/Flail mowers
Garden tractors
47
59
87
105
109
115
Water pumps
Mistblowers
Sprayers
129
137
141
Shakers
147
High-pressure washers
153
Rotary tillers
Earth augers
161
171
Transporters
Powercutters
175
183
Protective clothing Lubricant and sundry accessories
187
197
Technical assistance
205
Symbols
Home-plus
A range of machines aimed at the home user, for tidying
and cleaning the garden, cutting hedges and small trunks or
stems, and DIY jobs in general. Characterized by lightweight
and compact construction, to make the task of the operator
that much simpler. Easy to start, easy to use, easy to
maintain: these are the ideal tools for getting things done
quickly and neatly around the home.
Tough-tech
Solid and dependable, these are machines designed for
heavy and frequent use in countryside environments:
clearing overgrown and uncultivated areas, pruning and
cutting firewood, crop irrigation and disinfestation tasks.
Designed adopting solutions certain to ensure high work
rates and maximum durability over time.
Sharp-pro
No-nonsense everyday tools for the busy professional,
these are machines that stand out for the toughness of their
components, their high performance and their matchless
long-term durability. Specific materials used in construction
guarantee unwavering quality even when tackling the most
severe and lengthy of tasks, like forestry work and the
clearance of uncultivated areas or scrub and undergrowth.
Original accessories and spare parts
Quality mark identifying original Emak parts and
accessories. Designed to the most stringent quality
standards, these items guarantee smoother operation of
the machine and longer service life.
SRS Safety Release System
Innovative quick release system allowing the operator to
step away from the machine in an instant, for maximum
protection and safety.
Decompressor
The compression ratio in the cylinder reduces when the
starter is pushed in, allowing the engine to be started with
less effort.
“Easy-on”
User-friendly starting system ensures a smooth pick-up
of the engine with no kickback, and limits the number of
pulls required.
Lateral chain tensioner
This device simplifies tensioning adjustments while
avoiding any contact with the chain.
Pluscut
Multifunction lawnmowers with collection or mulching
system (in mulching operation the grass cuttings are finely
shredded and distributed over the lawn surface where they
decompose rapidly to become an efficient natural fertiliser).
Vibcut
An antivibration system that isolates the engine from the
handles and the body of the machine, considerably reducing
the vibrations transmitted to the user during operation so as
to guarantee maximum comfort and easy handling.
Rev&Go
Patented quick-fit mechanism for Multimate which enables
the operator to switch from one implement to another
within seconds, without the need for tools.
A success built on solid foundations
Emak was incorporated in 1992 a merger of two major
companies specializing in the production of gardening and
forestry machines: Oleo-Mac and Efco, both of which had
been active since the ‘70s in Northern Italy’s burgeoning
enterprise sector.
Combining the manufacturing and managerial resources of
two well established companies with a similar background,
the new industrial concern was able to emerge almost
immediately as a major player in an increasingly competitive
international scenario.
This was made possible by broadening the product range
and pursuing policies centred on quality, but equally by
careful industrial management and by the flair and skills of
the people appointed to run the company, who were able to
identify and exploit the changing trend in this sector: that
of the gradual shift from a user profile associated mainly with
agriculture, to an increasingly wider target taking in parks,
gardens and green spaces generally.
Other important milestones have marked the progress of
Emak from its incorporation to the present day: certification
to ISO 9001 as early as 1996 (the first Italian company in
this sector), flotation on the Milan Stock Exchange in June
1998, and the acquisition of 8 companies to create a solid
multinational group, which today gives the parent company
the freedom to implement its chosen commercial strategy
on the main European markets.
A big international business
Today Emak is a major international business concern
trading with two premier brands renowned the world over:
Efco and Oleo-Mac. Following Bertolini S.p.A. takeover in
2008, the Group has furtherly expanded the product range
with motocultivators, motor mowers, flail mowers and other
machines for agriculture and gardening under Bertolini and
Nibbi brands.
With its 4 production sites, 8 branches and 135
distributors, Emak maintains a presence in more than 85
countries, serving some 22.000 points of sale across the
five continents.
The strength of the group
Bagnolo in Piano, ITALY
EMAK DEUTSCHLAND GmbH
Fellbach-Oeffingen, GERMANY
EMAK FRANCE SAS
Rixheim, FRANCE
EMAK BENELUX NV
Meer, BELGIUM
EMAK UK LTD
Burntwood, UNITED KINGDOM
The role of Emak as a point of reference in Europe is
underpinned by a strong and commanding presence on the
main markets: having set up branches in the USA, Germany,
France, the United Kingdom, Spain, the Benelux countries
Poland, China, Emak has been able for some time to control
commercial policy directly on the more strategic continental
countries.
Significant efforts are being made all the time by Emak to
assist the branches, guaranteeing solid results in terms of
sales and ROI: this is achieved through specific projects
designed to strengthen the company’s partnership with the
sales network, increase the effectiveness of commercial
initiatives and raise brand awareness among users.
4
EMAK SUMINISTROS
ESPAÑA SA
Madrid, SPAIN
VICTUS-EMAK SP. Z.O.O.
Poznan, POLAND
EMAK USA INC.
Wooster - Ohio, UNITED STATES
EMAK ZHUHAI MACHINERY CO.LTD
Zhuhai - Guangdong, China
Environmental sustainability
Yes, we care.
We were the first in our field to obtain certifications in three crucial areas of business sustainability, namely Ethics,
Environment and Quality. Yes, we were. The entire Emak system, the whole production chain from design through to
distribution, is covered by quality certification that attests to its value and reliability. Because we have always believed
that before making a step forward, it is essential to know where that step will lead. We believe that respect is the basis
of growth and social cohesion. Yes, we do. We believe in responsibility and planning. We believe that the world does
not exist to serve us and that progress is also measured with awareness. We believe that nature is not a resource to be
exploited but a treasure to be preserved. For us and for the generations to come. Yes, we care.
ISO 9001: 2008 - Quality
Granted by the firm Det Norske Veritas (DNV) in 1996, this was the first official acknowledgement of our working methods.
In fact we were the first firm in our sector to be granted the ISO 9001 certification. This is recognition of our commitment
to quality and continual improvement. In January 2009, the certification was also extended to the Comag S.r.l. factory in
Pozzilli (IS).
SA 8000: 2008 - Ethics
The principal international benchmark, this recognizes ethical processes of production based on the Universal Declaration
of Human Rights, the International Labour Organisation (ILO) conventions and the UN Convention on the Rights of the
Child. In particular the certificate incorporates various standards relating to health, safety, child labour and other issues.
The certification, granted by DNV at the end of 2006, is concrete proof of our willingness to protect human rights and the
interests of our entire community of workers, consumers and investors.
ISO 14001: 2004 – The environment
Also granted by DNV, at the conclusion of an auditing period of several months, this demonstrates our production
cycle has been planned to prevent pollution and safeguard natural resources. As a result our constant commitment and
responsibility have undergone long-term planning, to safeguard resources and guarantee them for the benefit of future
generations. In addition to Emak, Comag S.r.l has also been awarded ISO 14001: 2004 certification. In 2010 we began
the process of transforming Emak into a Carbon Zero company, by taking action to reduce our energy usage and offset
our carbon emissions.
5
Burn Right. The right choice for a better tomorrow
Technology that respects the environment: enjoy outstanding performance and
low emissions.
Emak has always been totally committed to promoting environmental protection.
In keeping with this principle we have developed new engines – identified with
the Burn RightTM trademark – which contribute to safeguarding the surrounding
environment and which comply fully with applicable EURO 2 norms.
Working with our new eco-friendly engines also means benefiting from leadingedge technology that provides the perfect combination of high performance,
comfortable operation and minimal environmental impact.
The benefits of Burn Right engines
• 80% reduction in emissions
• 40% reduction in fuel consumption
• optimised engine performance
• easy starting
• longer maintenance intervals
Excellence that meets your expectations: a powerful engine which protects the environment
The research and dedication which Emak has put into engineering its EURO 2 engines have resulted in a drastic reduction
of polluting agents – in accordance with prescribed limits - and improved engine technology which directly benefits the
end user.
Given the same performance, EURO 2 machines guarantee:
• reduction in noxious emissions, particularly unburned hydrocarbons (HC), carbon monoxide (CO) and nitrogen oxides
(NOx), substances which are highly damaging to our health and to the environment. These reductions are well within
the limits imposed by the EURO 2 standard.
• reduction in fuel consumption of up to 40% (depending on the engine and the type of application), resulting in longer
refuelling intervals.
• engine performance (on like-for-like basis) on a par with similar EURO 1 engines.
• easy starting: the use of electronic devices such as digital coils, which have been introduced to simplify the reduction
of pollutants, facilitate starting by enabling the engine to fire at a lower rpm.
• longer maintenance intervals due to the reduction of carbon deposits caused by unburned gases (the result of complete
and clean combustion).
6
Tough, safe and easy to use:
feel like a true professional,
every day, in every situation.
7
8
Efco chain saws come in a full range of models designed to offer the right solution to individual requirements. Pruning,
felling, lopping: Efco offers models with different specifications to suit the job in hand. However, each and every
chainsaw in the range is characterised by top quality, reliable performance and easy use and maintenance. Furthermore,
the engine’s low consumption and linear torque-speed response ensure premium performance even during extended
periods of continuous duty. All machines are fitted with the very best safety devices, whilst electric models boast quality
certification issued by the most important bodies such as VDE, GS and IMQ.
The decompression valve facilitates
starting (models MT 440, 147, 152,
156, 162, MT 7200, MT 8200).
The “Easy-on” starting system
ensures any user can set the
machine running simply and
effortlessly, with a minimal number
of pulls on the cord (mod. MT 2600,
141 SP).
The “Primer” facilitates starting
even in the harshest climates
(models MT 2600, 132 S, 141 S, 141
SP, MT 440, 147, 152, 156, 162).
The filter/spark-plug cover can be
opened without tools for greatly
simplified maintenance (models
137, 141 S, 141 SP, MT 440, 147,
152, MT 7200, MT 8200).
Steel drive shaft and two-ring
piston for reduced wear and longer
life (models 141 S, 141 SP, MT 440,
147, 152, 156, 162, MT 7200, MT
8200, 165 HD, 199).
Single
multifunction
lever
incorporating on-off, half-throttle
and choke control devices: practical
and easy to use (mod. 137, 141 S,
141 SP, MT 440, MT 7200, MT
8200).
Carburettor with anti-vibration
mount guarantees stable fuel burn
whatever the operating conditions
(mod. MT 7200, MT 8200).
Aluminium oil pump: ensures zero
flow with engine idling and long,
durable service.
Electric chain saws
Product
Power/Voltage/Frequency
Bar length
Chain (pitch x gauge)
Oil pump
Oil tank capacity
Weight
EF 1800 E
1.7 kW/230 V/50 Hz
35 cm
3/8” x .050”
automatic
0.2 L
4.4 Kg
EF 2000 E
1.9 kW/230 V/50 Hz
41 cm
3/8” x .050”
automatic
0.2 L
4.4 Kg
Bar length
Oil pump
Oil/fuel tank capacity
Weight
35-41 cm/14”-16”
3/8” x .050” automatic
0.26 L/0.36 L
4.4 Kg
Bar length
Oil pump
Weight
Universal chain saws for home use
Product
Power/Displacement
MT 350
MT 3500
2.0 HP - 1.5 kW/38.9 cm 3
Universal chain saws for intensive home use
Product
Power/Displacement
137
MT 3700 2.2 HP - 1.6 kW/35.2 cm 35-41 cm/14”-16”
3/8” x .050” Special
automatic
0.22 L/0.32 L
4.1 Kg
141 S
MT 4100 S 2.5 HP - 1.8 kW/39.0 cm3
41 cm/16”
automatic
0.22 L/0.32 L
4.2 Kg
141 SP
MT 4100 SP
2.5 HP - 1.8 kW/39.0 cm3
41 cm/16”
.325” x .050” Microlite
automatic/adjustable
0.22 L/0.32 L
4.2 Kg
Bar length
Oil pump
Weight
3
Chain saws for intensive use
Product
Power/Displacement
MT 440
MT 4400 e-jet
2.9 HP - 2.1 kW/42.9 cm 41-46 cm/16”-18”
.325” x .050”
0.26 L/0.32 L
4.3 Kg
147
3.1 HP - 2.3 kW/45 cm3
41-46 cm/16”-18”
.325” x .058”
0.27 L/0.5 L
4.9 Kg
152
3.4 HP - 2.5 kW/51.7 cm 33-41-46 cm/13”-16”-18”
.325” x .058”
0.27 L/0.5 L
5.0 Kg
Bar length
Oil pump
Weight
3
3
Professional chain saws
Product
Power/Displacement
156
4.1 HP - 3.1 kW/56.5 cm 38-41-46-51 cm/15”-16”-18”-20”
.325” x .058” - 3/8” x .058”
0.35 L/0.70 L
5.5 Kg
162
4.7 HP - 3.5 kW/61.5 cm3
41-46-51 cm/16”-18”-20”
.325” x .058” - 3/8” x .058”
0.35 L/0.70 L
5.5 Kg
MT 7200
5.4 HP - 4.0 kW/70.8 cm 46-51-58-64 cm/18”-20”-23”-25”
3/8” x .058”
0.45 L/0.80 L
6.8 Kg
MT 8200
6.0 HP - 4.4 kW/80.7 cm3
51-58-64-76 cm/20”-23”-25”-30”
3/8” x .058”
0.45 L/0.80 L
7.1 Kg
Bar length
Oil pump
Weight
46-64 cm/18”-25”
3/8” x .058”
0.35 L/0.70 L
5.8 Kg
automatic/adjustable/
manual
0.60 L/1.00 L
10.0 Kg
3
3
“Heavy Duty” professional chain saws
Product
Power/Displacement
165 HD
4.3 HP - 3.2 kW/63.4 cm 3
199
6.8 HP - 5.0 kW/100.9 cm3 76-91-104 cm/30”-36” - 41”
.404” x .063”
Professional pruning chain saws
Product
Power/Displacement
Bar length
Oil pump
Weight
MT 2600
1.2 HP - 0.9 kW/25.4 cm 25 cm/10”
3/8” x .050” (sprocket) 1/4” x .050” (carving)
0.16 L/0.23 L
2.8 Kg
132 S
30-35 cm/12”-14”
3/8” x .050”
automatic
0.13 L/0.23 L
3.4 Kg
Adjusment of pruning head
Bar/Chain
Overall length of machine Weight of machine complete*
3
1.6 HP - 1.2 kW/30.1 cm3
Professionals pruners
Product
Power/Displacement
PT 2700
1.3 HP - 1.0 kW/27.0 cm from 0° to 90° (5 positions)
10” - 3/8” x .043”
2.30 m
5.9 Kg
PTX 2700
1.3 HP - 1.0 kW/27.0 cm3
from 0° to 90° (5 positions)
10” - 3/8” x .043”
2.60 m/3.80 m
7.4 Kg
3
* dry weight, without bar and chain
9
Electric chain saws
The new EF 2000 E electric chainsaw is designed for small jobs around the home, such as cutting up wood for stoves
and open fires, low-level pruning, or DIY projects. Thanks to its unique combination of high performance, ease of use
and minimal maintenance, this machine is the ideal tool for all kinds of work, demanding tasks included, with fast results
and maximum operating comfort assured.
Powerful 1700 and 1900 W motors guarantee high cutting speed, so that even the toughest timber or branches of
medium diameter can be taken on with total confidence.
Every time the trigger is released, a limiter system prevents the motor from starting up again until it has come to a
complete halt; this reduces impact on the sprag clutch components, providing longer life and quiet operation.
Equipped with a trigger release mechanism designed to uncouple the drive immediately. On releasing the throttle, the
chain stops dead in just a few tenths of a second.
All-metal ring gear and sprag clutch: greater durability and long-term resistance to wear assured.
Rubber covered rear handle with soft textured finish ensures a firm and anatomically correct grip on the machine at
all times.
Oil pump clearly exposed to view, providing accessibility for removal purposes, and ease of maintenance.
Activating the hand guard lever or releasing the trigger has the effect of uncoupling the drive and stopping the chain
in split second time, for maximum operator safety.
EF 1800 E
Power
1.7 kW
Voltage/Frequency
230 V / 50 Hz
Bar length
35 cm
3/8” x .050”
Oil pump
automatic
Oil tank capacity
0.2 L
Weight
4.4 Kg
EF 2000 E
10
Power
1.9 kW
Voltage/Frequency
230 V / 50 Hz
Bar length
41 cm
3/8” x .050”
Oil pump
automatic
Oil tank capacity
0.2 L
Weight
4.4 Kg
Designed for occasional use by home users (small pruning jobs, cutting trunks of small-medium diameter for firewood),
this chain saw is practical and easy to use, owing to a series of devices which make it extremely to start, operate and
maintain.
The illustrated step-by-step start-up instructions on the machine body ensure quick and safe starting, even for less expert
users.
Primer device, positioned in full view on the engine cover, facilitates starting from cold, after refuelling or following lengthy
idle periods.
On-Off switch and choke incorporated in a single multi-function lever: guarantees practical and simple operation.
Transparent tanks for immediate and continuous display of oil and fuel/air mixture levels.
Anti-vibration system using 3 spring dampers and 3 rubber stops: significantly isolates the operator from engine vibration,
for greater comfort during use.
The new design of the starter handle makes starting the machine more comfortable.
Filter cover built into the engine cowling: can be checked or serviced simply by removing the 3 fixing screws.
The sponge air filter is simple and quick to clean, ensuring more hours of running time between maintenance stops.
Carburettor bracket with 4 anti-vibration mounts: ensures stable fuel burn under all operating conditions, and longer
carburettor life.
Universal chain saw for home use
MT 350
MT 3500 (Euro 2)
Power/Displacement
2.0 HP - 1.5 kW/38.9 cm3
Bar length
35 - 41 cm / 14’’ - 16’’
3/8’’ x .050’’
Oil pump
automatic
0.26 L / 0.36 L
Weight
4.4 Kg
11
Universal chain saws for intensive home use
Chain saws intended to offer a credible response to the needs of discerning home users who want a power
tool for lopping, pruning, small-medium diameter cutting and general tasks like chopping up firewood. Designed
incorporating the technology of chain saws with higher specifications, these machines guarantee performance at
the very top of their class, cutting effortlessly and quickly, and with maximum efficiency.
Automatic oil pump, of aluminium construction: ensures zero flow at idling speed, and outstanding long-term durability.
Electronically controlled digital coil, reduces starting effort and favours lower fuel consumption.
2-ring piston (models 141 S – 141 SP), nickel cylinder, forged steel connecting rod and crankshaft: efficiency guaranteed
constant over time.
Models equipped with numerous devices that will simplify maintenance operations, like the inspectable muffler or no-tools
filter cover.
SP model equipped with “Easy-On” starting system and labour-saving side-mounted chain tensioner.
Available on models MT 3700 and MT 4100 in the Burn Right version which complies with Euro 2 emission standards.
137
MT 3700 (Euro 2)
Power/Displacement
2.2 HP - 1.6 kW/35.2 cm3
Bar length
35-41 cm/14”-16”
Oil pump
automatic
0.22 L/0.32 L
Weight
4.1 Kg
141 S
MT 4100 S (Euro 2)
Power/Displacement
2.5 HP - 1.8 kW/39.0 cm3
Bar length
41 cm/16”
Oil pump
automatic
0.22 L/0.32 L
Weight
4.2 Kg
141 SP
MT 4100 SP (Euro 2)
12
Power/Displacement
2.5 HP - 1.8 kW/39.0 cm3
Bar length
41 cm/16”
.325” x .050” Microlite
Oil pump
0.22 L/0.32 L
Weight
4.2 Kg
Machines designed to satisfy a wide range of users, from demanding home gardeners requiring a tool for frequent use,
to farmers and professional contractors. Its compactness, versatility and good power-to-weight ratio ensure excellent
cutting performance for any use, from limbing and pruning to cutting medium-sized trunks.
Euro 2 model equipped with new and exclusive E-jet technology.
Piston with 2 elastic rings, forged and machined steel shaft and connecting rod, needle bearings, nickel-plated cylinder:
constant level of efficiency assured over time, even in tough operating conditions.
Digital coil with electronic control: variable ignition advance allows for a reduction of the rate at which fuel is burned, making
the machine easier to start.
Adjustable aluminium oiler: facilitates the task of the operator by allowing variation of the oil feed to suit the workload on
the machine and the bar/chain combination; zero oil flow with the engine at idling speed ensures lower consumption and
reduced impact on the environment.
On/off switch, choke and half-throttle control incorporated into a single multifunction lever: guarantees practical and simple
operation.
Lateral chain tensioner: simplifies tensioning adjustments while avoiding any risk of contact with the chain.
MT 440
MT 4400 e-jet (Euro 2)
Power/Displacement
2.9 HP – 2.1 kW/42.9 cm³
Bar length
41 - 46 cm/16’’ – 18’’
.325’’ x .050’’
Oil pump
0.26 L/0.32 L
Weight
4.3 Kg
Five steps to naturally eco-friendly power.
Step 1
Intake
•
•
Clean air is directed into the bottom of the cylinder by way of the intake passage.
Fuel is directed into the injection pipe.
Step 2
Combustion
• The cylinder fills completely with clean air.
• The injection pipe is filled with fuel.
• Pressure in the combustion chamber increases as volume is reduced by the piston stroke.
Step 3
Expansion
• As a result of expansion, air is compressed in the bottom part of the cylinder.
• The fuel is compressed in the injection pipe.
Step 4
Discharge
• High pressure exhaust gases transfer pulsating energy into the injection pipe.
• Clean air is directed through the transfer ports into the combustion chamber.
Step 5
Injection
• Fuel is injected into the combustion chamber.
• Only clean air is emitted from the exhaust.
13
These powerful lightweight cutters provide high torque even at low RPM and are ideal for any kind of agricultural
use such as lopping, collecting firewood, felling and cutting up medium/large-sized trees.
The 147 and 152 models have a carburettor with compensator that keeps the air/fuel mixture ratio constant at all
times. This means that the power supplied by the engine remains high and efficiency is unaltered, greatly facilitating
the work of the operator.
The decompressor, “Primer” and semi-automatic choke offer trouble-free starting under all conditions, whilst the
one-piece handle/grip section has been separated from the engine and ensures excellent manoeuvrability.
The filter cover can be opened without tools, whilst the nylon filter is self-cleaning; the side chain tensioner makes
maintenance as simple as possible.
Automatic and adjustable oil pump of aluminium construction: ensures maximum long-term durability and adaptation
of oil flow to the type of work in hand, avoiding unnecessary waste.
147
Power/Displacement
3.1 HP - 2.3 kW/45 cm3
Bar length
41-46 cm/16”-18”
.325” x .058”
Oil pump
0.27 L/0.5 L
Weight
4.9 Kg
152
14
Power/Displacement
3.4 HP - 2.5 kW/51.7 cm3
Bar length
33-41-46 cm/13”-16”-18” Chain (pitch x gauge)
.325” x .058”
Oil pump
0.27 L/0.5 L
Weight
5.0 Kg
Powerful professional machines, designed for felling and cutting up trees of appreciable size. Engines characterized by
extremely linear torque at all engine speeds, guaranteeing high performance in any working conditions and unvarying
efficiency over time.
Maximum long-term reliability, thanks to steel crankshaft and piston with 2 rings.
Cylinder incorporating decompression system to ensure smooth and jerk-free start.
Specification features digital coil with variable ignition advance and rpm limiter, and flywheel with new fin geometry: engine
runs more smoothly and cooling is more efficient, even in difficult climatic conditions (high temperatures).
Handle/fuel tank assembly separate from the tool body: ensures a lower fuel mixture temperature and minimal vibration.
Automatic and adjustable aluminium oil pump: ensures maximum long-term durability and enables the oil flow to be adapted
to the type of job at hand, without needless waste.
156
Power/Displacement
4.1 HP - 3.1 kW/56.5 cm3
Bar length
38-41-46-51 cm/15”-16”-18”-20” Chain (pitch x gauge)
.325” x .058” - 3/8” x .058”
Oil pump
0.35 L/0.70 L
Weight
5.5 Kg
162
Power/Displacement
4.7 HP - 3.5 kW/61.5 cm3
Bar length
41-46-51 cm/16”-18”-20”
.325” x .058” - 3/8” x .058”
Oil pump
0.35 L/0.70 L
Weight
5.5 Kg
15
Powerful professional machines, designed for felling and cutting up trees of appreciable size. Engines characterized by
extremely linear torque at all engine speeds, guaranteeing high performance in any working conditions and unvarying
efficiency over time.
Maximum long-term reliability, thanks to steel crankshaft and piston with 2 rings.
Cylinder incorporating decompression system to ensure smooth and jerk-free start.
Equipped with carburettor with anti-vibration mount: ensuring stable fuel burn under all operating conditions.
Specification features digital coil with variable ignition advance and rpm limiter, and flywheel with new fin geometry: engine
runs more smoothly and cooling is more efficient, even in difficult climatic conditions (high temperatures).
Equipped with an on/off switch, choke and half-throttle control incorporated into a single multifunction lever: for guaranteed
functionality and simple use.
MT 7200
Power/Displacement
5.4 HP - 4.0 kW/70.8 cm3
Bar length
46-51-58-64 cm/18”-20”-23”-25”
3/8” x .058”
Oil pump
0.45 L/0.80 L
Weight
6.8 Kg
MT 8200
16
Power/Displacement
6.0 HP - 4.4 kW/80.7 cm3
Bar length
51-58-64-76 cm/20”-23”-25”-30”
3/8” x .058”
Oil pump
0.45 L/0.80 L
Weight
7.1 Kg
Designed for heavy and prolonged work in the most demanding conditions.
Casing in aluminium guarantees maximum resistance to stresses and ensures steady efficiency even with long chain bars.
Generously proportioned filtration surface affords optimum engine protection even in heavily dust-laden environments,
prolonging useful life.
Special cylinders and pistons with two rings, designed to withstand intensive and prolonged use over time.
Magnesium oiler ensures correct and continuous lubrication of the bar.
The 199 model is equipped with an electronic speed controller contributing to give optimum efficiency and long-term
durability of the engine.
“Heavy Duty” professional chain saws
165 HD
Power/Displacement
4.3 HP - 3.2 kW/63.4 cm3
Bar length
46-64 cm/18”-25”
3/8” x .058”
Oil pump
0.35 L/0.70 L
Weight
5.8 Kg
199
Power/Displacement
6.8 HP - 5.0 kW/100.9 cm3
Bar length
76-91-104 cm/30”-36”-41”
.404” x .063”
Oil pump
automatic/adjustable/manual
0.60 L/1.00 L
Weight
10.0 Kg
17
Professional pruning chain saws
Professional chainsaw characterized by an excellent combination of power, lightweight construction and easy handling:
elements making this the perfect tool for professional pruning and maintenance services on olive and fruit trees, and
other plants.
Compact balanced geometry and minimal weight make the job of the operator much easier, reducing the physical
effort required and extending times between rest breaks.
Tool-free filter access: just unscrew a knob (attached permanently to the cover to avoid being lost).
Innovative shock-absorbing handles: prevents the carburettor being exposed to vibration and guarantees a
particularly stable fuel burn, allowing easy operation at any angle.
The new chain guard assembly design minimises clogging due to shavings, thus reducing the frequency of cleaning.
Metal oil pump with adjustable flow allows variation of lubricant flow to suit operating conditions (consistency of
wood, weather, oil type).
A taper tipped bar is available for precision applications by qualified tree surgeons.
“Easy-on” starting system ensures a smooth pick-up of the engine with no kickback and a limited number of pulls.
Lateral chain tensioner, allowing the operator to adjust the chain tension swiftly, even in tricky positions.
This chainsaw must be used only for tree surgery by certificated tree surgeons.
MT 2600
Power/Displacement
1.2 HP - 0.9 kW/25.4 cm3
Bar length
25 cm/10”
3/8” x .050” (sprocket)
1/4” x .050” (carving)
Oil pump
0.16 L/0.23 L
Weight
2.8 Kg
Compact and easy-to-handle, designed for professional pruning and cutting of medium-sized branches on the ground
and at heights.
A special hook allows the chainsaw to hang from the body of the operator and thus cut branches in those hard-toreach places that are usually out of bounds to mechanical machinery.
The environmentally-friendly, low-emission engine is protected by a two-stage sponge/nylon air filter; its exceptional
power generates high chain speed ensuring a clean, precise cut that prevents damaging the bark.
Equipped with primer for easy starting from cold.
The filter cover can be opened without tools, thus simplifying maintenance.
This chainsaw must be used only for tree surgery by certificated tree surgeons.
132 S
18
Power/Displacement
1.6 HP - 1.2 kW/30.1 cm3
Bar length
30-35 cm/12”-14”
3/8” x .050”
Oil pump
automatic
0.13 L/0.23 L
Weight
3.4 Kg
Designed for lopping and trimming branches overhead without the need for ladders or mechanical access systems, or
when working on uneven or sloping ground.
Thanks to the telescopic pole extending up to 3.12 metres – no tools required – the PTX 2700 will make cuts 5 metres
above ground, and therefore even on the highest branches.
With the saw also adjustable through 5 intermediate positions from 0° a 90°, this is a pruner unique its class on
today’s market, delivering top performance in any operating position and giving a better view of the cutting area.
Aluminium engine shroud affording superior mechanical strength.
Professional type oiler ensures constant lubrication of the bar and chain.
Professional pruners
PT 2700
Displacement
27.0 cm3
Power
1.3 HP – 1.0 kW
Adjustment of pruning head
Bar/Chain
10” – 3/8” x .043”
Overall length of machine
2.30 m
Weight of complete machine*
5.9 Kg
PTX 2700
Displacement
27.0 cm3
Power
1.3 HP – 1.0 kW
Adjustment of pruning head
Bar/Chain
10” – 3/8” x .043”
Overall length of machine
2.60 m / 3.80 m
Weight of complete machine*
7.4 Kg
* dry weight, without bar and chain
19
Accessories for chain saws and pruners – Guide-bars and chains
Microlite® bars and chains. Ensure greater
efficiency, enhanced cutting safety, lower
weight and vibration, and improved lubrication.
Thanks to their reduced thickness and low engine power absorption,
Micro-Lite bars are ideal for all types of DIY applications. These
guide-bars ensure the maximum lightweight, low vibration, and
reduced kickback.
Laminated sprocket-nose bars
Laminated sprocket nose bars, designed for DIY and semiprofessional use, are ideal for lightweight, versatile, and highly reliable
chain saws. Equipped with a special barrier dam that prevents the loss
of oil, these guide-bars ensure perfect lubrication, top performance,
and longer working life of both bar and chain.
Solid bars (Power Match®) with replaceable
sprocket nose and oiling system (Lubrijet®).
angled
oilway hole
.3/8”
Solid guide-bars with a replaceable sprocket nose, designed for
professional applications, are equipped with an efficient oiling system
(Lubrijet®) thanks to an angled hole on the bar that is kept clear by the
transit of the chain drive links. The replaceable nose is available for
.325” and .3/8” pitch chains.
.325”
20
Power Match®, Micro-lite®, Lubrijet® are registered trademarks of BLOUNT EUROPE SA - Oregon Cutting System Division
Solid bars (Power Match®) with stellite
nose and oiling system (Lubrijet®).
angled
oilway hole
Solid bars with a stellite alloy nose, for professional use, guarantee
excellent performance and lifetime even in the most adverse
conditions and when subjected to prolonged stress. The stellite bar
nose offers the maximum wear resistance. The chains are equipped
with an efficient oiling system (Lubrijet®) that features an angled hole
on the bar that is kept clear by the transit of the chain drive links.
Solid bars with a stellite nose.
Solid bars with a stellite alloy nose, for professional use, guarantee
excellent performance and a long working lifetime even in the most
adverse conditions and when subjected to prolonged stress. The
stellite bar nose offers the maximum wear resistance.
Power Match®, Micro-lite® and Lubrijet® are registered trademarks of BLOUNT EUROPE SA - Oregon Cutting System Division
21
Length
Part
number
Chains
Pitch
x Thickness
N.
Links
OMX Reels
Part
number
Desc.
Part
number
Machines
MT 2600
132 S
132 SK
MT 350 - MT 3500
137 - MT 3700
141 S - MT 4100 S
141 SP - MT 4100 SP
MT 440 - MT 4400 e-jet
147
152
156
162
165 HD
MT 7200
MT 8200
199
EF 1800 E
EF 2000 E
EP 90
EP 100
EP 120
PT 2700
PTX 2700
Bars
14” - cm 35 0935 00357R .3/8” x .050” (1.3mm) 50-91 VG 5101 0103R 91 VGL 0010 00701
10” - cm 25 6309 0031R .3/8” x .043” (1.1mm) 39-90 SG 6309 0029R
10” - cm 25 5016 0097R .3/8” x .050” (1.3mm) 40-91 VG 5016 0096R
12” - cm 30 6309 0055R .3/8” x .043” (1.1mm) 44-90 SG 0010 0599R
12” - cm 30 5003 0233R .3/8” x .050” (1.3mm) 45-91 VG 5003 0235R
14” - cm 35 5003 0212R .3/8” x .050” (1.3mm) 52-91 VG 5003 0191R
14” - cm 35 5003 0212R .3/8” x .050” (1.3mm) 53-91 VG 5024 0146R
16” - cm 41 5005 2019R .3/8” x .050” (1.3mm) 57-91 VG 5005 0093R
91 VGL
91 PL
91 VS
0010 00701
0010 00765
16” - cm 41 0935 00536R .3/8” x .050” (1.3mm) 57-91 VG 5005 0093R
16” - cm 41 5005 2019R .3/8” x .050” (1.3mm) 57-91 VG 5005 0093R
16” - cm 41 5006 2014R .325” x .050” (1.3mm) 66-95 VP 0010 00722R
Bar with sprocket nose
18” - cm 46 5023 0059R .325” x .050” (1.3mm) 72-95 VP 0010 00723R
95 VPL 0100 00087
16” - cm 41 0946 00332R .325” x .058” (1.5mm) 66-21 BP 0010 00710R
18” - cm 46 0946 00333 .325” x .058” (1.5mm) 72-21 BP 0010 00711R
20” - cm 51 5001 2034 .325” x .058” (1.5mm) 78-21 BP 0010 00712R
13” - cm 33 0946 00309 .325” x .058” (1.5mm) 56-21 BP 0010 01038
21 BPL 01000 0053
(1)
16” - cm 41 5001 2038 .325” x .058” (1.5mm) 66-21 BP 0010 00710R
18” - cm 46 5001 2039 .325” x .058” (1.5mm) 72-21 BP 0010 00711R
20” - cm 51 5001 2040 .325” x .058” (1.5mm) 78-21 BP 0010 00712R
16” - cm 41 5002 2022 .3/8” x .058” (1.5mm) 60-73 DP 0010 00453R
18” - cm 46 5009 2021 .3/8” x .058” (1.5mm) 68-73 DP 0010 00350R
18” - cm 46 5002 2023R .3/8” x .058” (1.5mm) 68-73 DP 0010 00350R
20” - cm 51 5002 2024R .3/8” x .058” (1.5mm) 72-73 DP 0010 00373R
22” - cm 56 5002 2025 .3/8” x .058” (1.5mm) 77-73 DP 0010 00754R
18” - cm 46 0970 00300 .3/8” x .058” (1.5mm) 68-73 DP 0010 00350R
20” - cm 51 0970 00301R .3/8” x .058” (1.5mm) 72-73 DP 0010 00373R
73 DPL 00100 1118
73 DXL 01000 0054
73 LPL 01000 0055
22” - cm 56 0970 00501 .3/8” x .058” (1.5mm) 77-73 DP 0010 00754R
24” - cm 61 0970 00502 .3/8” x .058” (1.5mm) 84-73 DP 0010 01134R
(1)
25” - cm 64 5002 2042 .3/8” x .058” (1.5mm) 88-73 DP 0010 00598R
10” - cm 25 5003 0353 .1/4” x .050” (1.3mm) 60-25 AP 5003 0332R
25 AP 0100 00085
18” - cm 46 5002 2027 .3/8” x .058” (1.5mm) 68-73 DP 0010 00350R
Bar with stellite tip
20” - cm 51 5002 2028 .3/8” x .058” (1.5mm) 72-73 DP 0010 00373R
20” - cm 51 0970 00318 .3/8” x .058” (1.5mm) 72-73 DP 0010 00373R 73 DPL 00100 1118
23” - cm 58 0970 00292 .3/8” x .058” (1.5mm) 80-73 DP 0010 00351R 73 DXL 01000 0054
24” - cm 61 5009 0026 .3/8” x .058” (1.5mm) 80-73 LP 0010 00768R 73 LPL 01000 0055
25” - cm 64 0970 00293 .3/8” x .058” (1.5mm) 88-73 DP 0010 00598R
30” - cm 76 0980 00030 .3/8” x .058” (1.5mm) 98-73 DP 0010 00471R
30” - cm 76 0999 00670 .404” x .063” (1.6mm) 92-59 ACL 0999 00228
36” - cm 91 0999 00669 .404” x .063” (1.6mm) 108-59 ACL 0999 00225
22
(1) Non-European countries only.
Standard cutting systems.
Compatible cutting systems.
(1)
Chains
Machines
Length
Part
number
Pitch
x Thickness
N. Links
Part
number
Type
10” - cm 25
5016 0097R
.3/8” x .043” (1.1mm)
40
5016 0096R
91 VG
10” - cm 25
5003 0353
.1/4” x .050” (1.3mm)
60
5003 0332R
25 AP
10” - cm 25
6309 0031R
.3/8” x .043” (1.1mm)
39
6309 0029R
90 SG
12” - cm 30
5101 2012
.3/8” x .043” (1.1mm)
45
5101 0052R
90 SG
14” - cm 35
5101 2046R
.3/8” x .043” (1.1mm)
50
5101 0119R
90 SG
14” - cm 35
0935 00357R
.3/8” x .050” (1.3mm)
50
5101 0103R
91 VG
16” - cm 41
0935 00536R
.3/8” x .050” (1.3mm)
57
5005 0093R
91 VG
12” - cm 30
5003 0233R
.3/8” x .050” (1.3mm)
45
5003 0235R
91 VG
14” - cm 35
5003 0212R
.3/8” x .050” (1.3mm)
52
5003 0191R
91 VG
14” - cm 35
0935 00357R
.3/8” x .050” (1.3mm)
49
0010 00699R
91 VG
16” - cm 41
0935 00536R
.3/8” x .050” (1.3mm)
56
0010 00700R
91 VG
16” - cm 41
5005 2019R
.3/8” x .050” (1.3mm)
57
5005 0093R
91 VG
13” - cm 33
5006 2015
.325” x .050” (1.3mm)
56
0010 00671R
95 VP
16” - cm 41
5006 2014R
.325” x .050” (1.3mm)
66
0010 00722R
95 VP
13” - cm 33
0938 00066
.325” x .050” (1.3mm)
56
0010 00671R
95 VP
16” - cm 41
0938 00067R
.325” x .050” (1.3mm)
66
0010 00722R
95 VP
16” - cm 41
0946 00332R
.325” x .050” (1.3mm)
66
0010 00609R
21 LP
18” - cm 46
0946 00333
.325” x .050” (1.3mm)
72
0010 00610R
21 LP
18” - cm 46
0970 00300
.3/8” x .058” (1.5mm)
68
0010 00350R
73 DP
20” - cm 51
0970 00301R
.3/8” x .058” (1.5mm)
72
0010 00373R
73 DP
22” - cm 56
0970 00501
.3/8” x .058” (1.5mm)
77
0010 00754R
73 DP
24” - cm 61
0970 00502
.3/8” x .058” (1.5mm)
84
0010 00754R
73 DP
20” - cm 51 stellite
0970 00318
.3/8” x .058” (1.5mm)
72
0010 00373R
73 DP
0970 00292
.3/8” x .058” (1.5mm)
80
0010 00351R
73 DP
0970 00293
.3/8” x .058” (1.5mm)
88
0010 00598R
73 DP
0980 00030
.3/8” x .058” (1.5mm)
98
0010 00471R
73 DP
114 E
116 E
EF 15 E
EF 17 E
EF 19 E
125
134
135
136 - 140
140 S
MT 3600
MT4000
141
142
146
151
171
181
185 HD
PT 2500 - PTX 2500
Bars
Accessories for chain saws and pruners – Discontinued
Part number 010000059 Chain roll .3/8” x .050” type 72DXL UNIVERSAL
23
Part number
Machines
EF 1800 E
EF 2000 E
MT 350 - MT 3500
137 - MT 3700
141 S - MT 4100 S
141 SP - MT 4100 SP
MT 440 - MT 4400 e-jet
MT 4000
147
152
156
162
171
MT 7200
181
MT 8200
165 HD
185 HD
199
MT 2600
132 S
PT 2500 - PTX 2500
PT 2700 - PTX 2700
Sundry accessories for chain saws and pruners
Round bars
Special files for sharpening chain cutting edges. Available with various diameters in accordance with the chain to be sharpened. All bars are 8”/200
mm in length. Packing: carton. Quantity per carton: 6 Minimum order: 1 carton.
Ø 5/32’’ - 4.0 mm suitable for chain type
0010 00605
91VG, 91S, 90VG, 25AP, 91PL
0010 00606
90SG
0010 00607
20BP, 95VP, 21BP, 21LP
0010 00608
59AC, 73DX, 73LP, 73DP
Ø 13/64’’ - 5.2 mm suitable for chain type 59AC, 73DX,
0010 00592
73LP, 73DP as above, for significantly worn chains
Replaceable nose for bars
Replaceable nose for Power Match® bars with replaceable sprocket nose. Available for .325” and .3/8” pitch chains.
Pitch .325’’ gauge .058’’
0010 00770
Pitch .3/8’’ gauge .058’’
0010 00771
Bar cover
The bar cover is indispensable for operator safety and to prevent chain damage during transport.
Length 25 cm
W000 139
Length 25-30 cm
1144 033
Length 35 cm
1144 038
Length 40 cm
1144 043
Length 40 cm mini
0010 00216
Length 45 cm
1144 048
Length 50 cm
1144 053
Flat files
Files required for sharpening of the depth limiter and to keep it at the correct distance from the cutting edge. Packing: carton. Quantity per carton:
12. Minimum order: 1 carton.
Length 6’’ - 150 mm
0010 00258
Harness
Single harness designed for pruners.
Single harness for pruners
24
4160 463AR
Power, precision and safety
for preparing firewood.
Logsplitters
25
Logsplitters
26
Logsplitters
Logsplitters are specialist tools for preparing firewood. They split logs lengthwise, deftly cutting them down to size for
boilers, fireplaces and stoves. These machines are not only strong and reliable but also easy and safe to use. Available
in numerous different models and versions to fulfil the needs of a wide spectrum of users. They range from lightweight
and compact models for home use, to professional models both with vertical drive, with maximum splitting force of 17
tonnes designed for intensive workloads.
The two-handed momentary action
controls and sensitive bar provide
maximum protection for the operator
during both the splitting and return
strokes.
The collapsible cylinder allows for
convenient storage, reducing the
machine’s working height by 64 cm
(SPL 910) or 70 cm (SPL 1200, SPL
1700).
Timber retaining system: integrated
with the wedge guide system, it
keeps the log in position until the
cutting wedge makes contact. Useful
for securing all types of misshapen
wood, ideal for high cutting precision
(not available for SPL 910).
Guide bars (fold-away bars on SPL
1200, SPL 1700 models) attached
to the side of the machine frame
protect the operator from falling
timber during operation.
4-position tilting frame (SPL 910 T
- SPL 910 SC models) also enables
horizontal operation to facilitate
loading, unloading and processing.
External oil reservoir: makes it
easier to check the oil level and
in the case of maintenance, can
be disassembled by removing only
4 screws. Wheels (Ø 250 mm): for
easy repositioning without the use
of other means of transport.
The sliding wedge plates are
mounted on smooth-running, wearresistant brass shoes. This system
preserves the integrity of the frame,
protecting it from heavy wear and
therefore minimising the cost of
spare parts.
Hydraulic lifting arm: for effortless,
automated handling of large trunks
(SPL 1700 H T+PTO).
Vertical model which is both practical and versatile. Perfect for domestic use but also powerful enough for more intensive
workloads. Available with either single-phase or three-phase power system.
Logsplitters
SPLIT 610 series logsplitters for intensive use
The adjustable retaining claws assure an excellent grip and facilitate splitting operations.
The 10° inclined frame and base plate allow for better positioning of the log.
Control lever guards for operator safety.
Splitting power from 6 tonnes.
Wheels for easy transportation.
SPLIT 610 M
Operation
230 V - 2.2 kW
Splitting power
6t
Cutting height
55 cm
Splitting speed
11 cm/s
Oil reservoir capacity
5 Kg
Dimensions
56x60x149 cm
Weight
88 Kg
Wheels
Ø 200 mm
SPLIT 610 T
Operation
400 V - 2.2 kW
Splitting power
6t
Cutting height
55 cm
Splitting speed
11 cm/s
5 Kg
Dimensions
56x60x149 cm
Weight
88 Kg
Wheels
Ø 200 mm
27
Logsplitters
SPLIT 700 series logsplitters for intensive use
Semi-professional vertical models, for quick and effective handling of all types of wood. Available with either singlephase or three-phase power system.
The adjustable retaining claws assure an excellent grip and facilitate splitting operations.
The 10° inclined frame and base plate allow for better positioning of the log.
Height-adjustable splitting table.
Control lever guards for operator safety.
Splitting power from 7 tonnes.
Wheels for easy transportation.
SPLIT 700 M
Operation
230 V - 2.2 kW
Splitting power
7t
Cutting height
55 - 83 - 111 cm
Splitting speed
10 cm/s
5 Kg
Dimensions
57x54x155 cm
Weight
100 Kg
Wheels
Ø 200 mm
SPLIT 700 T
28
Operation
400 V - 2.2 kW
Splitting power
7t
Cutting height
55 - 83 - 111 cm
Splitting speed
10 cm/s
5 Kg
Dimensions
57x54x155 cm
Weight
100 Kg
Wheels
Ø 200 mm
These machines are safe, solid and high-precision tools which are essential in the case of continuous work. They have
a splitting force of 9 tonnes and can chop logs of up to 107 cm in height.
Logsplitters
SPL 910 series logsplitters for intensive use
B&S Intek I/C 6.5 HP petrol engine operation for the SPL 910 SC model, enables the logsplitter to be used outdoors
by anyone without a tractor PTO or an industrial 3 kW power supply.
Universal joint operation for the SPL 910 PTO model. Owing to the PTO provision and fixed top link, the logsplitter
can be safely coupled to a tractor’s hydraulic circuit.
3 kW THREE-PHASE electric motor operation for the SPL 910 T model, with patented THREE-PHASE inverter which
enables the phase of the power socket to be changed in seconds.
4-position tilting frame (SPL 910 T - SPL 910 SC models) also enables horizontal operation to facilitate loading,
unloading and processing.
Cylinder quick-fit device: the machine can be taken out of storage and set up in seconds without the use of tools,
simply by fixing the two removable pins at the base of the stem.
The collapsible cylinder allows for convenient storage, reducing the machine’s working height by 183 cm from 64
cm to 247 cm.
SPL 910 T
Operation
400 V - 3.0 kW
Splitting power
9t
Cutting height (with table)
107 (47) cm
Max. splitting speed (return speed)
9 (6) cm/s
Top link attachment
no
Dimensions
74x95x247 (183) cm
Weight
194 Kg
Wheels
standard, Ø 250 mm
SPL 910 SC
Operation
B&S Intek I/C (6.5 HP)
Splitting power
9t
107 (47) cm
12 (9) cm/s
Top link attachment
no
Dimensions
74x95x247 (183) cm
Weight
197 Kg
Wheels
standard, Ø 250 mm
SPL 910 PTO
Operation
cardan shaft coupling
Power needs
10 kW – 13.5 HP
Splitting power
9t
107 (47) cm
16 (11) cm/s
Top link attachment
yes
Dimensions
74x95x247 (183) cm
Weight
178 Kg
Wheels
standard, Ø 250 mm
29
Logsplitters
SPL 1200 series logsplitters for intensive use
Machines recommended for discerning users: their special engineering solutions and 12 tonne splitting power make
them particularly suited to the most intensive work, enabling them to cleave logs up to 110 cm in height.
Universal joint operation for the SPL 1200 PTO model. Owing to the PTO provision and fixed top link, the logsplitter
3 kW THREE-PHASE electric motor operation for the SPL 1200 T model, with patented THREE-PHASE inverter
which enables the phase of the power socket to be changed in seconds.
Two operating speeds can be selected via the control levers, which are combined with an oil-hydraulic system and
regenerative valve: - low-power, fast splitting (20-30 cm/s) – high-power, slow splitting due to high oil pressure.
Timber retaining system: integrated with the wedge guide system, it keeps the log in position until the cutting wedge
makes contact. Useful for securing all types of misshapen wood, ideal for high cutting precision.
Fold-away guide bars attached to the side of the machine frame protect the operator from falling timber during
operation.
Graduated shaft located inside the machine frame allows the upper and lower limit stops to be set without tools,
using practical cotter pins. This device means that the wedge stroke can be limited to the desired section of timber.
The collapsible cylinder allows for convenient storage, reducing the machine’s working height by 186 cm from 70
cm to 256 cm.
External oil reservoir: makes it easier to check the oil level and in the case of maintenance, can be disassembled by
removing only 4 screws.
SPL 1200 T
Operation
400 V - 3.0 kW
Splitting power
12 t
110 (55) cm
20 (11) cm/s
Top link attachment
yes
Dimensions
74x96x256 (186) cm
Weight
261 Kg
Wheels
optional, Ø 250 mm
SPL 1200 PTO
30
Operation
Power needs
15 kW - 20 HP
Splitting power
12 t
110 (55) cm
30 (15) cm/s
Top link attachment
yes
Dimensions
74x102x256 (186) cm
Weight
250 Kg
Wheels
optional, Ø 250 mm
Machines which are engineered to perform the most demanding and continuous work. Equipped with a robust frame
and professional grade oil-hydraulic system (comprising an oil reservoir, pump and control valves), these models deliver
a splitting force of 17 tonnes and can cut logs with a maximum height of 110 cm.
Logsplitters
SPL 1700 series professional logsplitters
Universal joint operation throughout the SPL 1700 series. Owing to the PTO provision and fixed top link, the logsplitter
3 kW THREE-PHASE electric motor operation for the SPL 1700 T + PTO and SPL 1700 H T + PTO models, with
patented THREE-PHASE inverter which enables the phase of the power socket to be changed in seconds.
Two operating speeds can be selected via the control levers, which are combined with an oil-hydraulic system and
regenerative valve: - low-power, fast splitting (20-16 cm/s) – high-power, slow splitting due to high oil pressure.
Timber retaining system: integrated with the wedge guide system, it keeps the log in position until the cutting wedge
makes contact. Useful for securing all types of misshapen wood, ideal for high cutting precision.
Fold-away guide bars attached to the side of the machine frame protect the operator from falling timber during
operation.
Dual power system: the machine to be driven by power take-off (PTO) or THREE-PHASE electric motor (SPL 1700
T+PTO, SPL 1700 H T+PTO). Hydraulic lifting arm: for effortless, automated handling of large trunks. (SPL 1700 H
T+PTO).
Reinforced support structure: ensures resistance to impact and pressure during operation, thus enhancing the
excellent stability and safety of the machine.
SPL 1700 PTO
Operation
Power needs
18 kW - 24 HP
Splitting power
17 t
110 (67) cm
20 (10) cm/s
Top link attachment
yes
Log lifting device
optional, mechanical
Dimensions
110x79x261 (191) cm
Weight
315 Kg
Wheels
optional, Ø 250 mm
SPL 1700 T+PTO
Operation
cardan shaft coupling / 400 V - 3.0 kW
Power needs
18 kW - 24 HP
Splitting power
17 t
110 (67) cm
16 (8) cm/s
Top link attachment
yes
Log lifting device
optional, mechanical
Dimensions
110x79x261 (191) cm
Weight
336 Kg
Wheels
optional, Ø 250 mm
SPL 1700 H T+PTO
Operation
cardan shaft coupling / 400 V - 3.0 kW
Power needs
18 kW - 24 HP
Splitting power
17 t
110 (67) cm
16 (8) cm/s
Top link attachment
yes
Log lifting device
standard, hydraulic
Dimensions
110x79x261 (191) cm
Weight
336 Kg
Wheels
optional, Ø 250 mm
31
4-way wedge
For dividing logs into 4 pieces with one pass.
4-way wedge for 9 tonne
6847 0001
6847 0003
6847 0005
Mobile table
Enables the wedge stroke to be shortened, making small-medium logs easier to split.
Mobile table for 9 tonne
6847 0002
6847 0004
6847 0006
Axle kit
6847 0007
Mechanical lifting kit
6847 0008
3-way blade
4004 00123
Axle kit with wheels and handling lever
Useful for handling and transport.
Mechanical trunk lifting kit
Makes it easier to lift and position heavy logs.
Blades
4004 26100
4-way blade
4004 00122
32
Standard blade
4004 00120
Wedge blade
4004 00121
SPL 1700
SPL 1200
SPLIT 700
SPL 910
Machines
Part number
SPLIT 610
Logsplitters
Accessories for logsplitters
Power, reliability and quality of cut:
all in perfect balance.
Hedgetrimmers
33
Hedgetrimmers
34
Hedgetrimmers
For accurate trimming and a clean cut it is essential to employ reliable machines that combine power with manoeuvrability
and ease of use. Efco hedgetrimmers feature Emak high-performance 2-stroke engines and top-quality blades that
ensure a clean cut, indispensable for an aesthetically-pleasing result and protection of plant health. With user comfort
always foremost in its thoughts, Efco has equipped its hedgetrimmers with devices such as “Primer” and “Lift Starter”
that guarantee easy starting even at low temperatures.
High quality blades with top cutting
edge ensure a clean and precise
cut that will not damage vegetation.
Equipped with adjustment system
for adaptability to any type of foliage.
Professional grade aluminium gear
case, drive linkage with pinion
carried in bearings and rods with
rollers, combining to guarantee long
life, low noise and minimal vibration.
Digital coil with speed limiter:
ensures constant engine efficiency
at all speeds.
Model with double-edged blade has
180° swivel handle for easy trimming
even when working at an angle
(models TG 2600 XP – TG 2750).
Snap-fit (no-tool) filter cover for
simplified maintenance.
Anti-vibration system utilizing 4
springs guaranteeing total isolation
from the operator’s hands (models
TG 2600 XP – TG 2750 XP).
In the DS 2800 H model the blade
can be adjusted through 12 different
positions from 0° to 180°, to ensure
the best working position at all times.
Electric models with double safety
switch on the grip for maximum
operator safety.
Distinguished by its light weight, compact construction and extremely simply use, this tool is ideal for noncontinuous use and for tending hedges and shrubs of medium size or without dense vegetation. Extremely quiet
operation, useful for working in built-up residential areas.
Hedgetrimmers
Electric hedegetrimmer for home use
Equipped with double safety switch on the grip for maximum operator safety.
Automatic blade stop in under 0.5 seconds when the accelerator is released.
Transparent hand guard for maximum work area visibility.
TG 600 E
Power
0.60 kW
Voltage
230 V
Frequency
50 Hz
Weight
3.9 Kg
Type/Blade
double
Length/Blade
600 mm
Pitch/Blade
24 mm
Professional electrical hedgetrimmer
Combines the best features of electric hedgetrimmers (quiet operation, light weight, manageability) with the
typical performance of petrol-engine models. Incorporating a rotating handle and high-quality blade, it meets
both the needs of discerning home users with tall hedges to trim, as well as the professional requirements of
maintenance contractors.
Equipped with rotating handle (3 positions at 90° intervals) and tempered steel blade, ideal for heavy-duty use.
Steel reduction unit with gears mounted on roller bearings and featuring the innovative SYNCROSTOP system, which
enables the blades to be stopped instantly.
Thermal cutout which protects the engine in the event of overload.
The laser cut, diamond ground blades are extremely strong and do not require sharpening.
TG 750 E
Power
0.70 kW
Voltage
230 V
Frequency
50 Hz
Weight
4.3 Kg
Type/Blade
double
Length/Blade
700 mm
Pitch/Blade
30 mm
35
Hedgetrimmers
Professional petrol hedgetrimmers
Lightweight, powerful and robust: just what you need to confidently tackle all types of hedge, no matter how tough or
dense. Featuring high-quality blades and gearboxes to guarantee consistent long-term efficiency, maximum productivity
and minimum effort.
High quality steel blades guarantee optimum results even on the thickest and toughest hedges. Adjustable, so as to adapt
to any operating situation.
Professional grade aluminium gear case, drive linkage with pinion carried in bearings and rods with rollers, combining to
guarantee long life, low noise and minimal vibration.
Petrol models are fitted with “Primer” system to facilitate cold starting.
Digital coil with electronic rpm limiter: mechanical output remains constant at any engine speed. Ignition advance facilitates
starting and favours low fuel consumption.
Anti-vibration system with 4 springs ensures total isolation of handles.
Double-edge blade models with 180° swivel handle lockable in 5 intermediate positions: maximum convenience in any
operatiing position, even close to walls.
New DS 2800 H model with 1.4 metre shaft and blade rotatable through 12 different positions from 0° to 180°, for maximum
working flexibility.
TG 2600 XP
Power
1.2 HP – 0.90 kW
Displacement
25.4 cm3
Weight
5.3 Kg
Type/Blade
double
Length/Blade
600 mm
Pitch/Blade
35 mm
TG 2750 XP
Power
1.2 HP – 0.90 kW
Displacement
25.4 cm3
Weight
5.5 Kg
Type/Blade
double
Length/Blade
750 mm
Pitch/Blade
35 mm
TGS 2750 XP
Power
1.2 HP – 0.90 kW
Displacement
25.4 cm3
Weight
5.2 Kg
Type/Blade
single
Length/Blade
750 mm
Pitch/Blade
35 mm
DS 2800 H
36
Power
1.3 HP -1.0 kW
Displacement
27 cm³
Weight
7.5 Kg
Type/Blade
double blade, rotatable through
12 positions from 0° to 180°
Length/Blade
500 mm
Cutting height
3.5 metres approx.
Pitch/Blade
35 mm
A rush of air, around the yard and
in the garden. Cleaning up out in
the open has never been so easy.
Blower/Vacuum cleaners
37
38
Powerful, efficient tools that quickly clear any area of leaves, shrubs and other debris. The handheld model is
recommended for domestic use, whilst the powerful backpack model is designed to handle large areas in both town and
country. Characteristic lightness, simplicity and silence make these machines invaluable and dependable workmates.
“Vibcut” professional anti-vibration
system, utilizing mounts with 4 steel
springs to isolate the operator totally
from machine vibrations.
Rubber covered handle ensures a
firm and comfortable grip on the
machine, while at the same time
isolating the hands of the operator
from vibrations.
Vacuumed material is chopped up by
a rotor with 4 steel blades (standard
feature) to reduce the volume when
inside the bag, down to 1/12 of
original size, so that more work can
be done with fewer emptying stops.
Double bladed fan delivers high
performance in terms of air flow and
velocity, while increasing the cooling
capacity of the engine.
Generously proportioned air intake
grille facilitates cleaning and
inspection of the fan rotor.
Digital coil with variable ignition
advance and flywheel with new
fin geometry: engine guaranteed
to run more smoothly, and cooling
rendered more efficient.
Ergonomic backpack equipped
with large and comfortable support
area, minimises the transmission of
vibration to the operator (model SA
2062).
Handgrip and throttle mounted
directly on the blower/vacuum tube
to ensure continuous control over
the air flow.
Practical handheld blowers, ideal for tidying away leaves, green waste and other debris in the garden. Characterised by
low vibration for consistently comfortable and extremely quiet operation, making them ideal for use in built-up residential
areas.
Eco-friendly engine (complying with Euro 2 emission standards) characterized by low noise, ideal for use in built-up residential
areas.
SA 3000 offers the lowest vibration levels on the market, only 3.5 m/s2, as well as extremely reduced noise emissions of only
89 dB(A).
SA 3000: “Vibcut” professional anti-vibration system, utilizing mounts with 4 steel springs located between the engine and
the outer casing, ensuring that vibrations transmitted to the operator are significantly reduced.
Rubber covered handle ensures a firm and comfortable grip on the machine, while at the same time isolating the hands of
the operator from vibrations (model SA 3000).
Vacuumed material is chopped up by a rotor with 4 steel blades (standard feature) to reduce the volume when inside the bag,
so that more work can be done with fewer emptying stops.
Cloth filter ensures maximum protection for the engine, in the event of operation in dust-laden environments. Reusable and
easy to clean. In foam on model SA 2700.
The blower can be converted to operate as a vacuum cleaner by fitting a kit comprising hose and collection bag (optional).
Handheld blowers
SA 2700
Power
1.2 HP – 0.9 kW
Displacement
30.5 cm3
Max air volume
11.6 m3/min - 700 m3/h
Max air speed
65 m/sec
Collection bag capacity
36 L
Weight
4.5 Kg
SA 3000
Power
1.3 HP - 1.0 kW
Displacement
30.5 cm3
Max. air volume
12.0 m3/min - 720 m3/h
Max. air speed
70 m/sec
Collection bag capacity
36 L
Weight
4.5 Kg
39
Backpack blowers
Backpack blower designed for tidying rural environments (farmyards and forecourts) and urban settings (parks, stadiums,
flowerbeds and streets). Also ideal for moving and compacting fruit and other produce as it falls from the plant. Available
with 2 types of engine depending on the areas to be tidied.
Its light weight, air speed and air delivery volume make this a convenient, powerful and high-performance tool.
Extremely low noise level.
Throttle ergonomically positioned directly on hose.
The oversize air filter with rubber sleeve connected to carburettor guarantees maximum machine efficiency even when used
for long periods in dusty surroundings (model SA 2062).
Extremely lightweight backpack frame made from melt-blown polypropylene (model SA 2062).
SA 2700 BP
Power
1.2 HP – 0.9 kW
Displacement
30.5 cm3
Max. air volume
12 m3/min – 700 m3/h
Max. air speed
65 m/sec
Fuel tank capacity
0.6 L
Weight
6.4 Kg
SA 2062
40
Power
4.5 HP - 3.3 kW
Displacement
61.3 cm3
Max. air volume
20 m3/min - 1200 m3/h
Max. air speed
90 m/sec
Fuel tank capacity
2.3 L
Weight
9.4 Kg
Single harness
Single harness for hand-held blower.
Single harness with double snap hook
SA 2062
SA 2700 BP
SA 3000
SA 2700
Machines
SA 2026 ERGO
Part number
Accessories for blowers/vacuum cleaners
6114 0011R
Conversion kit from blower to vacuum
Kit allowing simple conversion of hand-held blower to operate as vacuum cleaner.
5651 2007C
Conversion kit from blower to vacuum
5655 2001
5656 2001
Blower tube with duckbill end section
Optional tube with duckbill end section: enhances directionality and effectiveness of the air jet.
Blower/vacuum tube with duckbill end section.
5655 2002
Conversion kit from blower to mistblower
Kit allowing simple conversion of backpack blower to professional mistblower for spraying fungicides.
Conversion kit from blower to mistblower
5602 0119B
41
42
Blowers/Vacuum cleaners
Shred and chop at the flick of a switch:
green waste no longer a problem.
Bioshredders
43
Bioshredders
44
Bioshredders
An invaluable help to gardeners everywhere, these new bioshredders finally solve the disposal problems posed by green
waste (clippings, twigs, small prunings). Equipped with powerful electric motors or petrol engines, they will chop and
shred vegetable and organic waste, and foliage. Reduced to a fine consistency, these can be used as compost or mulch
to give beneficial nutrients back to the soil and favour natural plant growth.
Wide infeed openings for easy
loading of material to be shredded.
Cutting system with reinforced and
balanced blades.
Generously sized discharge port for
smooth and fast ejection of shredded
material.
Frame and legs incorporated into a
rigid and sturdy structure for maximum
stability during operation.
2400 W model equipped with cutter
adjustment system allowing adaptation
of the machine to suit the material
being shredded (fine, thick, moist, dry).
Petrol engine model features
professional cutting system with
12 double edged floating blades to
ensure maximum work rate even
when processing material of hard
consistency and large diameter.
Petrol engine model with generalpurpose central infeed opening, plus
side infeed opening used for tougher
material and branches of diameter
up to 60 mm.
Equipped with wheels and handle
incorporated into the infeed opening
for ease of handling and transport.
Lightweight, fitted with wheels and easy to manoeuvre, these bioshredders are the ideal appliances for shredding and
chipping leaves, twigs and branches of up to 40 mm diameter.
Bioshredders
Electric bioshredders
Powerful electric motors rated 2100 and 2400 W ensure optimum work rate even when processing tough material.
Robust metal structure provides a stable and secure stance during operation.
Low noise levels in operation: especially advantageous for home use, in residential areas.
2400 W model equipped with cutter adjustment system allowing adaptation of the machine to suit the material being
shredded (fine, thick, moist, dry).
Equipped with wheels and handle incorporated into the infeed opening for ease of handling and transport.
BT 2100 E
Engine
electric
Power
2.1 kW
Voltage/frequency
230V / 50Hz
Shreddable diameter
40 mm
Work rate
180 Kg/h
Weight
35 Kg
BT 2400 E
Engine
electric
Power
2.4 kW
Voltage/frequency
230V / 50Hz
Shreddable diameter
40 mm
Work rate
370 Kg/h
Weight
50 Kg
45
Bioshredders
Petrol bioshredder
Equipped with a powerful Honda engine, this is the ideal machine for chipping and shredding bulkier waste, including
branches of up to 60 mm diameter, where there is no electrical power supply available. Practical and fast (processes up
to 650 Kg/hour).
Professional cutting system with 12 double edged floating blades to ensure maximum work rate even when processing
material of hard consistency and large diameter.
General-purpose central infeed opening, plus side infeed opening used for tougher material and pieces of diameter
up to 60 mm.
Generously sized discharge port for swift disposal of shredded material.
Robust metal structure with legs guaranteeing maximum stability during operation.
BT 5500
46
Engine
Honda GX 160
Displacement
160 cm3
Shreddable diameter
60 mm
Work rate
650 Kg/h
Weight
80 Kg
Multimate. 1 big heart, 8 personalities.
8 interchangeable implements powered
by a single engine.
Multimate combined system
47
48
Multimate is the all-in-one tool that makes gardening 8 times more efficient. At its centre is one big heart: a compact,
lightweight and quiet engine which can power up to 8 different implements. Ideal for keen gardeners with diverse needs:
tidying lawn edges and around walls and fences, pruning trees and hedges, trimming bushes, and blowing away leaves
and debris. No matter what the needs of the private user, one big heart takes care of them all.
Multimate features the patented
Rev&Go system, a quick-fit
mechanism which enables the
operator to switch from one
implement to another within
seconds, without the need for
tools.
Ergonomic rubber handgrip which
absorbs vibration: all controls
are handily arranged within easy
reach.
Built-in choke lever and a clearly
visible, easily accessible primer: to
facilitate starting in any conditions.
Snap-fit filter cover for swift
inspection and cleaning of the foam
filter.
The implement can be locked in 2
positions (0° and 90°) for maximum
versatility.
Engine with digital coil which
facilitates starting and limits fuel
consumption.
Engine equipped with 3-spring antivibration system that insulates the
operator’s hand from vibration.
Eco-friendly Euro 2 engine with
muffler and catalytic converter.
Fitted with rock wool for optimised
temperature control and significant
sound reduction.
8 interchangeable implements powered by a single engine.
Multimate is based on a highly intuitive lock-release system which is so user-friendly and safe that it can be operated by
even the least expert users.
Multimate features the patented Rev&Go system, a quick-fit mechanism which enables the operator to switch from one
implement to another within seconds and without the need for tools: simply insert an implement and rotate to attach it, or
press a button and rotate to release it.
Multimate - Quick-fit lock-release system
From one implement to the next in just 5 seconds
Attachment procedure
Silver Medal for
Innovation
at
Demopark
2009
(Germany)
Release procedure
49
Multimate – Engine unit
Quiet, powerful and eco-friendly, the single 2-stroke engine features an innovative 3-spring anti-vibration system which
completely isolates it from the handgrip: this is the revolutionary heart of Multimate!
Lightweight engine: less than 4 Kg for total comfort and manoeuvrability.
Utmost respect for the environment: 30 cc EURO 2 engine which produces up to 80% lower emissions compared with
conventional 2-stroke engines.
Lower fuel consumption (40% less than conventional 2-stroke engines): over 45 minutes operation on a full tank. Significantly
lower noise emissions than other 2-stroke engines in its class.
Ergonomic rubber handgrip which absorbs vibrations: all controls are neatly arranged within easy reach.
Built-in choke lever and a clearly visible, easily accessible primer: to facilitate starting in any conditions.
Snap-fit filter cover for swift inspection and cleaning of the foam filter.
Supplied with harness which attaches to the front of the handgrip, providing additional support during operation.
Safety Control system: the engine stops as soon as the operator tries to detach the implement from the drive unit.
The implement can be locked in 2 positions (0° and 90°) for maximum versatility of use.
Engine
50
30 cc EURO 2
Power
1.0 HP
Primer
for introducing fuel into the
carburettor and guaranteeing
simple starting every time
Filter
foam air filter which guarantees an
optimum filtering action and long
cleaning intervals
Digital coil
to reduce effort during start-up
and limit fuel consumption
Anti-vibration system
with 3 springs
Fuel tank capacity
0.37 L
Implement fitting
2 positions (0° and 90°)
Weight
3.9 Kg
The ideal tool for cutting grass, weeds, bushes and shrubs in areas not accessible with other machines. Essential both
for cleaning and tidying private premises, and for clearing areas overgrown with untended vegetation.
Maximum comfort thanks to the ergonomic and adjustable handgrip, which can be adapted to suit the operator’s stature.
Equipped with Tap’n Go head for automatic line release.
Provides a cutting width of 40 cm to ensure superior efficiency in any situation.
Shaft arm tube
Ø 22 mm
(internal drive shaft Ø 6 mm)
Cutting components
Ø 109 Tap’n Go head, 2.0 mm line
Weight
2.3 Kg
Multimate - Brushcutter
51
52
Multimate - Trimmer
The perfect implement for tending to less accessible corners of the garden, even those with obstacles.
Ergonomic handgrip of new design: adjustable for adapting to different operator postures and ensuring maximum handling
comfort at all times.
Equipped with Tap’n Go head for automatic line release.
Shaft arm tube
Ø 22 mm
(internal drive shaft Ø 6 mm)
Cutting components
Weight
1.9 Kg
Practical and lightweight attachment designed for cutting and tidying lawn edges along paths and flower beds; the
vertical cutting action enables it to accurately follow the contours of the lawn, tidying borders that other machines
such as brushcutters and lawnmowers are unable to reach.
Efficient cutting blade 200 mm in diameter and 2 mm thick.
Equipped with a practical, front-mounted plastic guide wheel, 135 mm in diameter, which keeps the edger on track and
ensures an even finish.
Ergonomic and adjustable handgrip which can be adapted to suit the operator’s stature.
Shaft
Ø 22 mm (internal drive shaft Ø 6 mm)
Cutting components
blade Ø 8”/200 mm, thickness 2 mm
Blade guard
plastic
Depth of cut
50 mm
Wheel
plastic (Ø 135 mm)
Weight
2.8 Kg
Multimate - Lawn Edger
53
54
Multimate - Blower
Practical and manoeuvrable, this implement is ideal for trouble-free removal of leaves, twigs and garden debris.
Particular attention has been given to enhancing the comfort of the end user.
Duck-billed nozzle: directs the airflow with precision, removing even wet leaves from the ground.
Powerful air jet for maximum work efficiency in any conditions.
Thanks to the adjustable handgrip, the machine can be adapted to any posture.
The machine’s light weight (5.5 Kg) and even weight distribution ensure optimum balance and extremely comfortable use.
Air flow rate
600 m3/h
Air speed
60 m/s
Handle
swivelling
Weight
1.6 Kg
The 1.1 metre shaft enables the operator to trim hedges up to 3 metres high, without the use of a ladder. Twelve
different blade settings.
Extreme versatility thanks to:
- device for adjusting the blade through 12 positions (from 0° to 135°), without the use of tools
- 2-position implement fitting (0° and 90°), allowing for operation up against a wall
The gearbox is made of aluminium to increase its durability and reduce the overall weight of the machine.
Hedgetrimmer attachment mounted on 1.1 metre shaft, enables the operator to trim hedges up to 3 metres high without
the use of a ladder.
Gearbox
in aluminium
Cutting action
reciprocating
Blade length
510 mm
Cutting width
25 mm
Cutting height
1.5 metres approx.
Blades
adjustable through 12 positions
from 0° to 135°
Blade pitch
30 mm
Weight
2.2 Kg
Gearbox
in aluminium
Cutting action
reciprocating
Blade length
510 mm
Cutting width
25 mm
Cutting height
3 metres approx.
Blades
adjustable through 12 positions
from 0° to 135°
Blade pitch
30 mm
Weight
2.6 Kg
Multimate - Hedgetrimmer
55
56
Multimate - Pruner
For pruning all kinds of tree branches and foliage up to three metres from the ground, to keep growth under control.
The 10” bar with 3/8” pitch enables effortless cutting of branches 10-12 cm in diameter.
The shaft arm is rubber coated to ensure a safe grip and minimise the transmission of vibrations to the operator.
The semi-transparent chain oiler reservoir enables the operator to read the oil level without removing the cap.
The handgrip can be rotated by 90° for a choice of two operating positions, enabling the bar to be adapted according to
the branches to be pruned.
Shaft arm length
1.5 m
Bar length
10” (250 mm)
Chain
Oregon 3/8” x .043”
Chain thickness
1.1 mm
0.165 L
Weight
2.4 Kg
Versatile implement which can be used for preparing soil for grass seeding, as well as digging furrows for planting
flowers, shrubs and vegetables. Its versatility means that it can also be used for turf scarification.
Supplied as standard with a set of 4 blades giving an operating width of 30 cm. The rotors are independent to enable
operation with only 2 blades, thereby reducing the operating width to 15 cm and permitting work between narrowly spaced
rows of plants (such as potato plants, vegetable plants etc.).
Available as accessories: set of 4 cutters designed for tilling soft or previously turned soil, one scarifier and one plough.
Robust aluminium housing with spur gear and worm gear drive.
Foldable handlebars for easy storage and transport (e.g. in the boot of a car).
Pair of wheels (160 mm in diameter) for conveniently transporting the machine between workplaces.
Rotor
2+2 blades - 30 cm
Rotor guard
plastic
Gearbox
1 forward speed
Transmission
in aluminium
Handlebars
folding
Weight
9.4 Kg
Multimate - Tiller
57
Tiller
Pruner
Hedgetrimmer
Blower
Lawn Edger
Trimmer
Machines
Brushcutter
Part number
Engine unit
Accessories for Multimate combined system
Set of 4 cutters
Set of 4 additional cutters for tilling soft or previously turned soil.
Set of 4 cutters
6860 2001
Scarifier
Scarifier for freeing turf of moss and thatch, thereby allowing the lawn to breath.
Scarifier
6860 2003
Plough
Tool for deeper furrowing and preparation of the ground prior to tillage.
Plough
6860 2004
Brushcutter head
Ø 109 mm Tap’n Go head with automatic line release (thickness 2.4 mm).
6308 0015A
Brushcutter disc
8” disc with 4 blades, thickness 2.0 mm, for tackling the toughest grass.
8” disc with 4 blades, thickness 2.0 mm
4095 681R
Curved shaft trimmer head
Ø 105 mm Tap’n Go head with automatic line release (thickness 2.0 mm).
6124 2043
Pruner bar and chain
Pruner bar and chain.
Bar length 10” (250 mm)
6309 0031R
Oregon chain 3/8” x .043” thickness 1.1 mm
6309 0029R
Harness for engine unit
Comfortable harness to support the engine unit and reduce muscular effort.
Harness for engine unit
4160 463AR
Easy kit
Exclusive and practical storage kit for stowing implements and engine unit in the smallest possible space. Wall mountable. Ensures maximum safety
by preventing accidental contact with the implements.
Storage kit
58
0011 01730
Obstacles no problem, however big or small.
Gardens, ditches, undergrowth…
we have just the cut you want.
Brushcutters
59
Brushcutters
60
Brushcutters
You might need to trim borders, tidy your garden or clear undergrowth: for each one of these tasks you can always find just
the right Efco brushcutter. With the technical specifications best suited to the job in hand. Efco brushcutters are fitted with
specially designed engines, characterised by high torque even at low RPM. Also worthy of mention are the self-lubricating
bushings and ergonomic handles designed to provide maximum operator comfort; additional features such as the oversize
clutch, steel drive shaft and two-ring piston make these machines a safe, dependable and durable workmate.
Steel drive shaft and two-ring
piston: a guarantee of longer life
(DS 2800, DS 3200, DS 3800, DS
4200, DS 4500, 8460, 8530, STARK
44, STARK 42 BP).
Burn Right models equipped
with catalytic converter, ensuring
significant reduction of pollutant
emissions and observance of the
most stringent environmental
standards.
Transmission with self-lubricating
bearings designed to minimize
vibrations for greater operator
comfort.
Adjustable anti-vibration system
allowing adaptation of ergonomic
machine
features
(handles,
harness) to any height and build of
operator.
Air filter with paper element
affording
excellent
engine
protection even when operating in
heavily dust-laden environments:
lower maintenance and longer
service life guaranteed (DS 2800,
DS 3200, DS 3800, DS 4200, DS
4500, 8460, 8530).
Decompression valve (DS 4200,
DS 4500): when activated, reduces
pressure in the combustion
chamber to ensure the engine will
start easily even from cold.
Ergonomic
handle
featuring
innovative and patented solutions
designed to give a secure and
permanently comfortable grip.
New bevel drive attached by way
of M10 male thread: improved
strength and simpler removal /
replacement of cutting tool (DS
2800, DS 3200, DS 3800, DS 4200,
DS 4500, 8460, 8530, STARK 38,
STARK 44, STARK 42 BP).
Electric trimmers
Product
Power/Voltage/Frequency
Tube diameter
Grip
Clutch Fuel tank capacity
Weight
8061
600 W/120-230 V/50-60 Hz 22 mm
single
-
-
3.2 Kg
8091
850 W/120-230 V/50-60 Hz
22 mm
single
-
-
3.5 Kg
8100
1000 W/120-230 V/50-60 Hz 22 mm
single
-
-
4.5 Kg
Brushcutters
Brushcutters
STARK series universal brushcutters for home use
Product
Power/Displacement
STARK 25 TR
1.0 HP-0.8 kW/25.4 cm3
STARK 2500 TR
STARK 25 IC
1.0 HP-0.8 kW/25.4 cm3
STARK 2500 S
STARK 25
1.0 HP-0.8 kW/25.4 cm3
STARK 2500 T
Tube diameter
Grip
Weight
22 mm
single
yes
0.75 L
4.5 Kg
26 mm
single
yes
0.75 L
5.6 Kg
26 mm
handlebar
yes
0.75 L
6.2 Kg
STARK series brushcutters for intensive use
Product
Power/Displacement
Tube diameter
Grip
Weight
STARK 38 IC STARK 3800 S
STARK 38
STARK 3800 T
1.8 HP-1.3 kW/36.2 cm3
28 mm
single
yes
0.87 L
6.8 Kg
1.8 HP-1.3 kW/36.2 cm3
28 mm
handlebar
yes
0.87 L
7.3 Kg
STARK series “Heavy-Duty” brushcutters for intensive use
Product
Power/Displacement
Tube diameter
Grip
Weight
STARK 44 IC
STARK 4400 S
STARK 44
STARK 4400 T
STARK 42 BP
STARK 4400 BP
2.1 HP-1.6 kW/40.2 cm3
28 mm
single
yes
0.87 L
6.9 Kg
2.1 HP-1.6 kW/40.2 cm3
28 mm
handlebar
yes
0.87 L
7.4 Kg
2.1 HP-1.6 kW/40.2 cm3
26 mm
single
yes
0.87 L
9.5 Kg
PREMIUM series universal brushcutters for intensive home use
Product
Power/Displacement
Tube diameter
Grip
Weight
DS 2800 S 1.3 HP-1.0 kW/27 cm3
24 mm
single
yes
0.58 L
5.5 Kg
DS 2800 T
1.3 HP-1.0 kW/27 cm3
24 mm
handlebar
yes
0.58 L
6.0 Kg
PREMIUM series brushcutters for intensive use
Product
Power/Displacement
Tube diameter
Grip
Weight
DS 3200 S
1.5 HP-1.1 kW/30 cm3
26 mm
single
yes
0.58 L
5.8 Kg
DS 3200 T
1.5 HP-1.1 kW/30 cm3
26 mm
handlebar
yes
0.58 L
6.3 Kg
DS 3800 S
1.9 HP-1.4 kW/36.3 cm3
28 mm
single
yes
0.75 L
7.2 Kg
DS 3800 T
1.9 HP-1.4 kW/36.3 cm3
28 mm
handlebar
yes
0.75 L
7.8 Kg
PREMIUM series professional brushcutters
Product
Power/Displacement
Tube diameter
Grip
Weight
DS 4200 S
2.2 HP-1.6 kW/40.2 cm3
28 mm
single
yes
0.75 L
7.3 Kg
DS 4200 T
2.2 HP-1.6 kW/40.2 cm3
28 mm
handlebar
yes
0.75 L
7.9 Kg
DS 4500 S
2.7 HP-2.0 kW/44.3 cm3
28 mm
single
yes
0.75 L
7.8 Kg
DS 4500 T
2.7 HP-2.0 kW/44.3 cm3
28 mm
handlebar
yes
0.75 L
8.4 Kg
8460 IC
2.5 HP-1.8 kW/45.7 cm3
28 mm
single
yes
1.50 L
7.5 Kg
8460
2.5 HP-1.8 kW/45.7 cm3
32 mm
handlebar
yes
1.50 L
8.1 Kg
8530 IC
2.8 HP-2.1 kW/52.5 cm3
28 mm
single
yes
1.50 L
7.4 Kg
8530
2.8 HP-2.1 kW/52.5 cm3
32 mm
handlebar
yes
1.50 L
8.2 Kg
8550 BOSS
2.8 HP-2.1 kW/52.5 cm3
32 mm
handlebar
yes
1.50 L
8.5 Kg
PREMIUM series professional backpack brushcutters
Product
Power/Displacement
Tube diameter
Grip
Weight
DSF 4200
2.2 HP-1.6 kW/40.2 cm3
26 mm
single
yes
0.75 L
9.4 Kg
8465 ERGO
2.5 HP-1.8 kW/45.7 cm3
26 mm
single yes
1.50 L
10.8 Kg
8535 ERGO
2.8 HP-2.1 kW/52.5 cm3
26 mm
single
yes
1.50 L
11.0 Kg
Brushcutters with 4-stroke engine
Product
Displacement
Tube diameter
Grip
Weight
DS 2600 4S
25.0 cm3
24 mm
single
yes
0.55 L
5.6 Kg
DS 3600 4S
35.8 cm3
26 mm
single
yes
0.65 L
6.7 Kg
DS 3600 4T
35.8 cm3
26 mm
handlebar
yes
0.65 L
7.0 Kg
61
Brushcutters
Electric trimmers
Domestic machines for trimming and edging grass, offering excellent balance thanks to the motor being positioned
at the rear.
A thermal cutout prevents damage to motor in case of overheating.
The blade is shielded at 135° by a rounded guard that slides over any sort of terrain.
The flexible steel shaft is protected by a self-lubricating liner.
8061
Power
600 W
Voltage/Frequency
120-230 V/50-60 Hz
Tube diameter
22 mm
Grip
single
Weight
3.2 Kg
8091
Power
850 W
Voltage/Frequency
120-230 V/50-60 Hz
Tube diameter
22 mm
Grip
single
Weight
3.5 Kg
8100
62
Power
1000 W
Voltage/Frequency
120 - 230 V/50 - 60 Hz
Tube diameter
22 mm
Grip
single
Weight
4.5 Kg
Domestic brushcutters for tidying gardens.
These light and easy-to-handle machines are able to keep vibrations to an absolute minimum as they are fitted with
self-lubricating bushings on the transmission shaft, whilst the engine and grip have been kept separate.
The forged-steel drive shaft and connecting rod guarantee dependable performances and long life.
Centrifugal clutch with shoes of sintered material ensuring resistance to stress and long-term durability.
Equipped with a primer that fills the carburettor with fuel mixture to ensure easy starting with a limited number of
pulls.
Air filter accessible simply by pressing a release catch (no tools needed).
STARK 2500 models available in Burn Right version complying with Euro 2 emission standards.
Brushcutters
STARK series universal brushcutters for home use
STARK 25 TR
STARK 2500 TR (Euro 2)
Power/Displacement
1.0 HP - 0.8 kW/25.4 cm3
Tube diameter
22 mm
Grip
single
Clutch
yes
Fuel tank capacity
0.75 L
Weight
4.5 Kg
STARK 25 IC
STARK 2500 S (Euro 2)
Power/Displacement
1.0 HP - 0.8 kW/25.4 cm3
Tube diameter
26 mm
Grip
single
Clutch
yes
Fuel tank capacity
0.75 L
Weight
5.6 Kg
STARK 25
STARK 2500 T (Euro 2)
Power/Displacement
1.0 HP - 0.8 kW/25.4 cm3
Tube diameter
26 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
0.75 L
Weight
6.2 Kg
63
Brushcutters
STARK series brushcutters for intensive use
Brushcutters designed to deliver high efficiency and constant quality over time, even in the face of non-stop use and
hostile work environments.
Piston which ensures undiminished, high-quality performance over time.
Generously proportioned flywheel for more effective engine cooling, even in high temperatures.
Aluminium recoil housing, able to withstand the hardest stresses during intensive use.
Aluminium tube and 7 mm steel drive shaft: combination guaranteeing maximum power transmission and minimal
vibration.
Felt filter ensures optimum engine protection, even in dust-laden environments.
STARK 3800 models available in Burn Right version complying with Euro 2 emission standards.
STARK 38 IC
Power/Displacement
1.8 HP – 1.3 kW/36.2 cm3
Tube diameter
28 mm
Grip single
Clutch
yes
Fuel tank capacity
0.87 L
Weight
6.8 Kg
STARK 38
64
Power/Displacement
1.8 HP – 1.3 kW/36.2 cm3
Tube diameter
28 mm
Grip handlebar
Clutch
yes
Fuel tank capacity
0.87 L
Weight
7.3 Kg
Designed for intensive, continuous work in tough conditions, such as dusty environments or in high ambient temperatures.
The robust technological solutions adopted guarantee consistently high quality.
Brushcutters
STARK series “Heavy-Duty” brushcutters for intensive use
Professional piston with 2 rings which ensures high-quality, dependable performance over time.
Aluminium housing for protection against knocks and operating stresses.
Flywheel designed to guarantee constant cooling control, even at high temperatures.
Generously sized cloth air filter: maximum protection of the engine even in very dry or dusty environments.
Optimised engine for longer intervals between refuelling stops and very low running costs.
STARK 44 model with shaft arm of diameter 28 mm for added strength; ideal for prolonged and intense use.
STARK 4400 and STARK 4400 BP models available in the Burn Right version which complies with Euro 2 emission
standards.
STARK 44 IC
Power/Displacement
2.1 HP – 1.6 kW/40.2 cm3
Tube diameter
28 mm
Grip single
Clutch
yes
Fuel tank capacity
0.87 L
Weight
6,9 Kg
STARK 44
Power/Displacement
2.1 HP - 1.6 kW/40.2 cm3
Tube diameter
28 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
0.87 L
Weight
7.4 Kg
STARK 42 BP
STARK 4400 BP (Euro 2)
Power/Displacement
2.1 HP - 1.6 kW/40.2 cm3
Tube diameter
26 mm
Grip
single
Clutch
yes
Fuel tank capacity
0.87 L
Weight
9.5 Kg
65
Brushcutters
PREMIUM series universal brushcutters for intensive home use
A range of brushcutters for demanding users who want a machine offering the best possible combination of performance
and ease of operation. New eco-friendly engines ensure care for the environment.
Models equipped with digital coil for easy starting in any conditions.
Air filter with paper element affording excellent protection to the engine even when operating in heavily dust-laden
environments, guaranteeing longer service.
Aluminium engine housing ensures maximum strength and durability, even in the face of intensive and prolonged
cutting.
Lightweight and compact bevel gear drive reduces weight at the head, making the machine easier to handle and
position. Bevel drive attached by way of M10 male thread.
Ergonomically designed handles (loop type covered in textured rubber, cowhorn in aluminium) ensuring maximum
operator comfort whatever the position of the machine when in use, and isolation of the hands from vibration.
DS 2800 S
Power/Displacement
1.3 HP - 1.0 kW/27 cm3
Tube diameter
24 mm
Grip
single
Clutch
yes
Fuel tank capacity
0,58 L
Weight
5.5 Kg
DS 2800 T
66
Power/Displacement
1.3 HP - 1.0 kW/27 cm3
Tube diameter
24 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
0.58 L
Weight
6.0 Kg
For home users who need a machine to tackle demanding and sustained workloads. These are models that perform
well even under stress, without ever falling short on operator convenience.
Brushcutters
PREMIUM series brushcutters for intensive use
Models equipped with digital coil for easy starting in any conditions.
Air filter with paper element affording excellent engine protection even when operating in heavily dust-laden
environments: lower maintenance and longer service life guaranteed.
26 mm diameter shaft elongated by 5 cm to ensure the operator can always take up a comfortable posture.
Aluminium engine housing ensures maximum strength and durability, even in the face of intensive and prolonged
cutting.
Model DS 3800 equipped with adjustable anti-vibration system allowing adaptation of ergonomic machine features
(handles, harness) to any height and build of operator.
New bevel drive attached by way of M10 male thread: improved strength and simpler removal / replacement of
cutting tool.
DS 3200 S
Power/Displacement
1.5 HP - 1.1 kW/30 cm3
Tube diameter
26 mm
Grip
single
Clutch
yes
Fuel tank capacity
0.58 L
Weight
5.8 Kg
DS 3200 T
Power/Displacement
1.5 HP - 1.1 kW/30 cm3
Tube diameter
26 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
0.58 L
Weight
6.3 Kg
DS 3800 S
Power/Displacement
1.9 HP - 1.4 kW/36.3 cm3
Tube diameter
28 mm
Grip
single
Clutch
yes
Fuel tank capacity
0.75 L
Weight
7.2 Kg
DS 3800 T
Power/Displacement
1.9 HP - 1.4 kW/36.3 cm3
Tube diameter
28 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
0.75 L
Weight
7.8 Kg
67
Brushcutters
Professional models designed for clearing thick grass, shrubs and undergrowth (all models, except for the DS 4200,
are fitted with a 3-tooth professional disc designed specifically for cutting back undergrowth).
Engines provide high and linear torque even at low revolutions.
Steel crankshaft and piston with 2 rings, diamond finished to guarantee maximum quality and consistency over time.
Models equipped with digital coil and decompressor for easy starting in any conditions.
Paper air filter which provides excellent protection of the engine even in very dusty environments: ensures extended
maintenance intervals and increased durability.
Magnesium housing: ideal combination of light weight and resistance to prolonged stress.
Models equipped with professional anti-vibration system for superior shock absorption: ideal for professional and
prolonged use.
Equipped with ergonomic handgrips and professional adjustable harness.
DS 4200 S (Euro 2)
Power/Displacement
2.2 HP – 1.6 kW/40.2 cm3
Tube diameter
28 mm
Grip
single
Clutch
yes
Fuel tank capacity
0.75 L
Weight
7.3 Kg
DS 4200 T (Euro 2)
Power/Displacement
2.2 HP - 1.6 kW/40.2 cm3
Tube diameter
28 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
0.75 L
Weight
7.9 Kg
DS 4500 S (Euro 2)*
Power/Displacement
2.7 HP - 2.0 kW/44.3 cm3
Tube diameter
28 mm
Grip
single
Clutch
yes
Fuel tank capacity
0.75 L
Weight
7.8 Kg
DS 4500 T (Euro 2)*
68
Power/Displacement
2.7 HP - 2.0 kW/44.3 cm3
Tube diameter
28 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
0.75 L
Weight
8.4 Kg
* available from autumn 2011.
8460 IC
Power/Displacement
2.5 HP - 1.8 kW/45.7 cm3
Tube diameter
28 mm
Grip
single
Clutch
yes
Fuel tank capacity
1.50 L
Weight
7.5 Kg
Brushcutters
8460
Power/Displacement
2.5 HP - 1.8 kW/45.7 cm3
Tube diameter
32 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
1.50 L
Weight
8.1 Kg
8530 IC
Power/Displacement
2.8 HP - 2.1 kW/52.5 cm3
Tube diameter
28 mm
Grip
single
Clutch
yes
Fuel tank capacity
1.50 L
Weight
7.4 Kg
8530
Power/Displacement
2.8 HP - 2.1 kW/52.5 cm3
Tube diameter
32 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
1.50 L
Weight
8.2 Kg
8550 BOSS
Power/Displacement
2.8 HP - 2.1 kW/52.5 cm3
Tube diameter
32 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
1.50 L
Weight
8.5 Kg
69
Brushcutters
PREMIUM series professional backpack brushcutters
Ideal for working on steep or sloping ground and cleaning ditches, banks and undergrowth.
The ergonomic backpack has height-adjustable straps and support for lower back made of breathable material, thus
enabling the operator to work without restriction.
Steel drive shaft, two-ring piston and oversize air filter ensure long endurance.
In the DSF 4200 and 8465 ERGO models the ergonomic backpack allows the torso to twist and bend unrestricted, for maximum
freedom of movement. Super-cushioning mount with 4 springs to minimise vibrations.
Models DSF 4200 and 8465 ERGO with innovative quick-release coupling system, which allows the operator to release the
machine swiftly and easily in hazard situations.
Handle of new design rotates through 350° and is readily detachable from the shaft without disturbing the cables, simplifying
transport of the machine (DSF 4200, 8465 ERGO model).
DSF 4200
Power/Displacement
2.2 HP - 1.6 kW/40.2 cm3
Tube diameter
26 mm
Grip
single
Clutch
yes
Fuel tank capacity
0.75 L
Weight
9.4 Kg
8465 ERGO
Power/Displacement
2.5 HP - 1.8 kW/45.7 cm3
Tube diameter
26 mm
Grip
single
Easy start
yes
Clutch
yes
Fuel tank capacity
1.50 L
Weight
10.8 Kg
8535 ERGO
70
Power/Displacement
2.8 HP - 2.1 kW/52.5 cm3
Tube diameter
26 mm
Grip
single
Easy start
yes
Clutch
yes
Fuel tank capacity
1.50 L
Weight
11.0 Kg
Maximum care for the environment
Maximum operating economy
Unburned hydrocarbons (UHCs) reduced by 85%. Savings of up to 50% on fuel.
Nitrous oxides (NOx) reduced by 65%.
Ultra low oil consumption.
Low maintenance and parts replacement costs.
Superior comfort
No two-stroke fuel mixture required.
Low-noise engine, much easier on the ear.
Minimal vibrations.
Easy starting.
Few exhaust fumes, no smell.
Brushcutters
Brushcutters with 4-stroke engine
High performance
Engine tiltable through 360°: runs smoothly in any position.
High torque even at low crankshaft speeds.
Aluminium recoil housing, for dependable long-term durability.
7 mm internal drive shaft offers unwavering top-level quality.
DS 2600 4S
Displacement
25.0 cm3
Tube diameter
24 mm
Grip
single
Clutch
yes
Fuel tank capacity
0.55 L
Weight
5.6 Kg
DS 3600 4S
Displacement
35.8 cm3
Tube diameter
26 mm
Grip
single
Clutch
yes
Fuel tank capacity
0.65 L
Weight
6.7 Kg
DS 3600 4T
Displacement
35.8 cm3
Tube diameter
26 mm
Grip
handlebar
Clutch
yes
Fuel tank capacity
0.65 L
Weight
7.0 Kg
71
Brushcutters
Additional tools for brushcutters
Pruner EP 90
Adaptable to models STARK 25 and STARK 2500. Same characteristics as model
EP 100.
Product number 6306 9002B
Pruner EP 100
Implement for brushcutters with shaft diameter of 24 mm, 26 mm (excluding
models STARK 25 and STARK 2500) and 28 mm. Extremely easy and quick to fit,
with no tools required: replaces the cutting head. The automatic oil pump mounted
on the cutting implement ensures that an ideal flow is delivered to bar and chain
at all times. The special profile of the fine, lightweight chain is designed to protect
against the effects of kickback, thus offering maximum operator safety.
Product number 6306 9001E
Pruner EP 120
Professional model for intensive use compatible with brushcutters with shaft arm
diameter 26 mm* (except for models STARK 25 and STARK 2500).
Product number 6309 0033A
EP 90
EP 100
EP 120
* In order to use the attachment on DS 3200 models it is necessary to replace
flexible coupling shaft p/n 6128 0064R, with rigid adapter p/n 61280104 (can be
ordered individually).
Swivel hedgetrimmers
Compatible with rigid and backpack brushcutters with shaft arm diameter 26 mm
(excluding models STARK 25 and STARK 2500).
Model EH 50 (48 cm blade) is particularly suitable for hedge maintenance and can rotate
through 270° with numerous fixed positions in between.
Model EH 25 (25 cm blade) is designed for cutting grass and tidying flowerbeds.
Furthermore, the special blade locking device means that it can be folded over the arm,
thus keeping overall dimensions to a minimum.
The EHD 50 attachment joins the 48 cm blade accessory to a 35 cm long shaft for use in
combination with models with detachable shaft arm (excluding STARK 25 D).
Models EH 24 and EH 48 are compatible with brushcutters DS 2800.
EH 24 - EH 25
EH 48 - EH 50 - EHD 50
EH 24 p/n 5805 9011 for shafts Ø 24 mm can be fitted to DS 2800 model with adapter p/n 6128 0095
EHD 50 p/n 5805 9010 for detachable shaft arms
Cultivator for small gardens
A professional, quality implement for small jobs. Fitted with subsoiler to control working
depth and blades made of special high strength steel. The drag bar is essential in
ensuring faultless control of the machine and reducing physical effort on the part of the
operator. Width of rotors: 200 mm.
Product number 4188 901
72
8061
M8 male
22
8091
M8 male
22
8100
M8 male
22
STARK 25 TR / STARK 2500 TR
M8 male
22
STARK 25 IC / STARK 2500 S
M8 female
26
STARK 25 / STARK 2500 T
M8 female
26
M10 male
28
M10 male
28
28
M10 male
28
M10 male
28
STARK 44 FE
M8 female
26
STARK 42 BP / STARK 4400 BP M8 female
24
DS 2800 S
M10 male
24
DS 2800 T
M10 male
26
DS 3200 S
M10 male
26
DS 3200 T
M10 male
28
DS 3800 S
M10 male
28
DS 3800 T
M10 male
28
DS 4200 S
M10 male
28
DS 4200 T
M10 male
28
DS 4500 S
M10 male
28
DS 4500 T
M10 male
28
8460 IC
M10 male
32
8460
M10 male
28
8530 IC
M10 male
32
8530
M10 male
32
8550 BOSS
M10 male
26
DSF 4200
M10 male
26
8465 ERGO
M10 male
26
8535 ERGO
M10 male
24
DS 2600 4S
M10 male
26
DS 3600 4S
M10 male
26
DS 3600 4T
M10 male
DISCONTINUED MODELS
24
DS 2500 S
M10 male
22
8060
M8 male
26
8250 IC
M8 female
26
8250
M8 female
24
8250 IC ERGO
M10 male
24
8250 ERGO
M10 male
26
8250 ICD
M8 female
26
8300 IC
M8 female
26
8300
M8 female
26
8350 IC
M8 female
26
8350
M8 female
28
8400 IC
M8 female
28
8400
M8 female
26
8355
M8 female
26
8405
M8 female
26
STARK 25 D
M8 female
26
DS 2800 D
M8 female
26
M8 female
26
M8 female
26
STARK 42
M8 female
26
STARK 42 IC
M8 female
Cultivator for small gardens
EHD 50
EH 50
EH 48
EH 24
EP 120
EP 100
EP 90
Bevel
gear Ø
Shaft arm
outer Ø
Machines
EH 25
Swivel hedgetrimmers
Pruner
Brushcutters
Additional tools for brushcutters
4188 901
compatible tools
73
Brushcutters
Brushcutter accessories
“Tap’n go” Heads with 2 nylon lines
Heads
Part number
6001 2020A
6106 2023A
6302 9008A
6308 0011A
4199 040AR
Ø 105 mm, M8x1.25
left hand female shaft
thread, with Ø 1.65 mm
line, counter-clockwise
rotation
Ø 105 mm, M8x1.25
rotation
Ø 105 mm, M8x1.25
left hand male shaft
rotation
Ø 109 mm, M8x1.25
rotation
Ø 130 mm, M8x1.25
rotation
Part number
reel with line
Part number
reel with line
Part number
reel with line
Part number,
reel and line
Part number,
reel and line
6001 2019AR
6106 2006R
6106 2006R
6308 0012R
4199 045R
8061
•
8091
•
8100
•
STARK 44 FE
STARK 42 BP / STARK 4400 BP DS 2800 S
DS 2800 T
DS 3200 S
DS 3200 T
DS 3800 S
DS 3800 T
DS 4200 S
DS 4200 T
DS 4500 S
DS 4500 T
8460 IC
8460
8530 IC
8530
8550 BOSS
DSF 4200
8465 ERGO
8535 ERGO
DS 2600 4S
DS 3600 4S
DS 3600 4T
DISCONTINUED MODELS
DS 2500 S
8060
8250 IC
8250
8250 IC ERGO
8250 ERGO
8250 ICD
8300 IC
8300
8350 IC
8350
8400 IC
8400
8355
8405
STARK 25 D
DS 2800 D
STARK 42
STARK 42 IC
74
standard equipment
compatible tools
•
Brushcutters
“Tap’n go” Heads with 2 nylon lines
Heads
Part number
8061
8091
8100
STARK 44 FE
STARK 42 BP / STARK 4400 BP
DS 2800 S
DS 2800 T
DS 3200 S
DS 3200 T
DS 3800 S
DS 3800 T
DS 4200 S
DS 4200 T
DS 4500 S
DS 4500 T
8460 IC
8460
8530 IC
8530
8550 BOSS
DSF 4200
8465 ERGO
8535 ERGO
DS 2600 4S
DS 3600 4S
DS 3600 4T
DISCONTINUED MODELS
DS 2500 S
8060
8250 IC
8250
8250 IC ERGO
8250 ERGO
8250 ICD
8300 IC
8300
8350 IC
8350
8400 IC
8400
8355
8405
STARK 25 D
DS 2800 D
STARK 42
STARK 42 IC
4199 032AR
6117 2019A
4199 039AR
6111 2059A
6301 9008A
6111 2061A
Ø 130 mm, M8x1.25
rotation
Ø 130 mm, M10x1.25
rotation
Ø 130 mm, M8x1.25
rotation
Ø 130 mm, M10x1.25
rotation
ø 130 mm,
with 2.40 mm line,
with universal mount
Ø 160 mm, M10x1.25
rotation
Part number,
reel and line
Part number,
reel and line
Part number,
reel and line
Part number,
reel and line
Part number,
reel and line
Part number,
reel and line
4199 041R
4199 014A
4199 042R
4199 031A
4199 014A
6303 20003BR
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
75
Brushcutters
“Quick Load” heads with strengthened aluminium knob
Heads
Part number
6301 9010A
6301 9012A
Ø 130 mm, M8x1.25
thread, with Ø 2.40
mm line, counterclockwise rotation
6301 9009A
Ø 130 mm,M10x1.25
6301 9011A
Ø 130 mm, M8x1.25
Ø 130 mm,M10x1.25
Part number
reel without line
Part number
reel without line
Part number
reel without line
Part number
reel without line
4199 049
4199 049
4199 049
4199 049
8061
8091
8100
STARK 44 FE
STARK 42 BP / STARK 4400 BP DS 2800 S DS 2800 T
DS 3200 S
DS 3200 T
DS 3800 S
DS 3800 T
DS 4200 S
DS 4200 T
DS 4500 S
DS 4500 T
8460 IC
8460
8530 IC
8530
8550 BOSS
DSF 4200
8465 ERGO
8535 ERGO
DS 2600 4S
DS 3600 4S
DS 3600 4T
DISCONTINUED MODELS
DS 2500 S
8060
8250 IC
8250
8250 IC ERGO
8250 ERGO
8250 ICD
8300 IC
8300
8350 IC
8350
8400 IC
8400
8355
8405
STARK 25 D
DS 2800 D
STARK 42
STARK 42 IC
76
standard equipment
compatible tools
Brushcutters
Universal multi-line heads with 6 and 8 lines
Heads
Part number
8061
8091
8100
STARK 44 FE
DS 2800 S
DS 2800 T
DS 3200 S
DS 3200 T
DS 3800 S
DS 3800 T
DS 4200 S
DS 4200 T
DS 4500 S
DS 4500 T
8460 IC
8460
8530 IC
8530
8550 BOSS
DSF 4200
8465 ERGO
8535 ERGO
DS 2600 4S
DS 3600 4S
DS 3600 4T
DISCONTINUED MODELS
DS 2500 S
8060
8250 IC
8250
8250 IC ERGO
8250 ERGO
8250 ICD
8300 IC
8300
8350 IC
8350
8400 IC
8400
8355
8405
STARK 25 D
DS 2800 D
STARK 42
STARK 42 IC
4180 052A
4180 058
4180 057
4180 961A
Ø 2.75”/73 mm,
6 four-lobed,
Ø 3 mm lines,
20-25.4 mm bore
plastic
3.15”/80 mm, 8
four-lobed lines Ø 3.5
mm, 20-25.4 mm
“Pro” bore in plasticaluminium
Ø 3.15”/80 mm, 8
four-lobed lines Ø 3.5
mm, 20-25.4 mm
“Super Pro” bore
in aluminium
Ø 5.2”/137 mm,
8 four-lobed
Ø 3 mm lines,
20-25.4 mm bore
plastic
77
Brushcutters
Special steel blades for grass cutting
3-tooth blades in special steel
Blades
Part number
4095 567AR
4095 675AR
4095 637AR
4095 638AR
4095 643
Ø 10”/255 mm,
thickness 1.6 mm,
bore 25.4 mm
Ø 12”/305 mm,
thickness 2.5 mm,
bore 25.4 mm
Ø 9”/230 mm,
thickness 1.4 mm,
bore 25.4 mm
Ø 10”/255 mm,
thickness 1.4 mm,
bore 25.4 mm
Ø 10’’/255 mm,
thickness 1.4 mm,
bore 25.4 mm
8061
8091
8100
STARK 25 IC / STARK 2500 S STARK 25 / STARK 2500 T
STARK 44 FE
•
DS 2800 S
DS 2800 T
DS 3200 S
DS 3200 T
DS 3800 S
DS 3800 T
DS 4200 S
DS 4200 T
DS 4500 S
DS 4500 T
8460 IC
8460
8530 IC
8530
8550 BOSS
DSF 4200
8465 ERGO
8535 ERGO
DS 2600 4S
DS 3600 4S
DS 3600 4T
DISCONTINUED MODELS
DS 2500 S
8060
8250 IC
8250
8250 IC ERGO
8250 ERGO
8250 ICD
8300 IC
8300
8350 IC
8350
8400 IC
8400
8355
8405
STARK 25 D
DS 2800 D
STARK 42
STARK 42 IC
78
Fixed 3-tooth blade in steel
standard equipment
compatible tools
3-tooth blades in tempered steel
Blades
Part number
8061
8091
8100
STARK 44 FE
DS 2800 S
DS 2800 T
DS 3200 S
DS 3200 T
DS 3800 S
DS 3800 T
DS 4200 S
DS 4200 T
DS 4500 S
DS 4500 T
8460 IC
8460
8530 IC
8530
8550 BOSS
DSF 4200
8465 ERGO
8535 ERGO
DS 2600 4S
DS 3600 4S
DS 3600 4T
DISCONTINUED MODELS
DS 2500 S
8060
8250 IC
8250
8250 IC ERGO
8250 ERGO
8250 ICD
8300 IC
8300
8350 IC
8350
8400 IC
8400
8355
8405
STARK 25 D
DS 2800 D
STARK 42
STARK 42 IC
4095 673AR
4095 674AR
4095 568AR
4095 563AR
4095 565AR
4095 065AR
Ø 10”/255 mm,
thickness 1.8 mm,
bore 25.4 mm
Ø 12”/305 mm,
thickness 2.4 mm,
bore 25.4 mm
Ø 9”/230 mm,
thickness 1.4 mm,
bore 25.4 mm
Ø 10”/255 mm,
thickness 1.4 mm,
bore 25.4 mm
Ø 9”/230 mm,
thickness 1.4 mm,
bore 25.4 mm
Ø 10”/255 mm,
thickness 1.4 mm,
bore 25.4 mm
Brushcutters
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
79
Brushcutters
22-tooth blades
in tempered steel
Blades
Part number
4095 666AR
4095 636AR
4095 635AR
4095 564AR
4095 066AR
Ø 8”/200 mm,
thickness 1.6 mm,
bore 25.4 mm
Ø 9”/230 mm,
thickness 1.4 mm,
bore 25.4 mm
Ø 10”/255 mm,
thickness 1.4 mm,
bore 25.4 mm
Ø 9”/230 mm,
thickness 1.4 mm,
bore 25.4 mm
Ø 10”/255 mm,
thickness 1.4 mm,
bore 25.4 mm
8061
8091
8100
STARK 44 FE
DS 2800 S
DS 2800 T
DS 3200 S
DS 3200 T
DS 3800 S
DS 3800 T
DS 4200 S
DS 4200 T
DS 4500 S
DS 4500 T
8460 IC
8460
8530 IC
8530
8550 BOSS
DSF 4200
8465 ERGO
8535 ERGO
DS 2600 4S
DS 3600 4S
DS 3600 4T
DISCONTINUED MODELS
DS 2500 S
8060
8250 IC
8250
8250 IC ERGO
8250 ERGO
8250 ICD
8300 IC
8300
8350 IC
8350
8400 IC
8400
8355
8405
STARK 25 D
DS 2800 D
STARK 42
STARK 42 IC
80
standard equipment
compatible tools
3-tooth brush blades in tempered steel
Shredder blades with 2 and 3 curved teeth in special steel
Self-sharpening
20-tooth blade
Blade transport
protection
Blades
Part number
8061
8091
8100
STARK 44 FE
DS 2800 S
DS 2800 T
DS 3200 S
DS 3200 T
DS 3800 S
DS 3800 T
DS 4200 S
DS 4200 T
DS 4500 S
DS 4500 T
8460 IC
8460
8530 IC
8530
8550 BOSS
DSF 4200
8465 ERGO
8535 ERGO
DS 2600 4S
DS 3600 4S
DS 3600 4T
DISCONTINUED MODELS
DS 2500 S
8060
8250 IC
8250
8250 IC ERGO
8250 ERGO
8250 ICD
8300 IC
8300
8350 IC
8350
8400 IC
8400
8355
8405
STARK 25 D
DS 2800 D
STARK 42
STARK 42 IC
4095 641AR
4095 665AR
4095 677AR
4095 678R
4095 679R
4095 680R
4196 086
Ø 10”/255 mm,
thickness 3.0 mm,
bore 25.4 mm
Ø 12”/305 mm,
thickness 3.0 mm,
bore 25.4 mm
Ø 12”/305 mm,
thickness 3.0 mm,
bore 25.4 mm
Ø 12”/305 mm,
thickness 4.0 mm,
bore 25.4 mm
Ø 12”/305 mm,
thickness 3.0 mm,
bore 25.4 mm
Ø 12”/255 mm,
thickness 2.0 mm,
bore 25.4 mm
Safety cover
for 230 and 255 mm
diameter blades
Brushcutters
•
•
•
•
•
•
•
81
Brushcutters
Plastic guards
Metal guards
Guards
Part number
6002 2007R 6003 2012 6001 2055 4198 114A 6001 2008 6107 2044 4161 506A 4192 048A 6104 2035
4174 280
For petrol For brushcutters
For 850 W/ engine
For brushcutters Ø 200 metal
For 600 W
For 850 W
For 600 W
trimmer 8250 Ergo For brushcutters For brushcutters
1000 W
series
series
guard for
electric trimmer electric trimmer electric trimmer electric
STARK
TR
STARK series 38/46/53
trimmer
series
cc
25/30/34/38 cc 22-tooth blade
series
8061
•
8091 •
8100
•
•
•
•
•
•
•
•
STARK 44 FE
•
STARK 42 BP / STARK 4400 BP •
DS 2800 S
•
DS 2800 T
•
DS 3200 S
•
DS 3200 T
•
DS 3800 S
•
DS 3800 T
•
DS 4200 S
•
DS 4200 T
•
DS 4500 S
•
DS 4500 T
•
8460 IC
•
8460
•
8530 IC
•
8530
•
8550 BOSS
•
DSF 4200
•
8465 ERGO
•
8535 ERGO
•
DS 2600 4S
•
DS 3600 4S
•
DS 3600 4T
•
DISCONTINUED MODELS
DS 2500 S
•
8060
•
8250 IC
•
8250
•
8250 IC ERGO
•
8250 ERGO
•
8250 ICD
•
8300 IC
•
8300
•
8350 IC
•
8350
•
8400 IC
•
8400
•
8355
•
8405
•
STARK 25 D
•
DS 2800 D
•
•
•
STARK 42
•
STARK 42 IC
•
82
standard equipment
compatible tools
4174 279
Ø 255 metal
guard for
60/80-tooth
blade
Single harness
Harness with cushion
Double harness
Professional harness
Harnesses
Part number
4160 463AR
6001 0143R
4179 164R
4179 172R
6120 0106R
6305 0018AR
6307 0002R
4174 163
with snap hook
without snap hook
with cushion
with “comfort”
cushion
double
double with quick
release
professional
professional with
quick release
8061
8091
•
8100
•
•
•
•
•
STARK 44 FE
DS 2800 S
•
DS 2800 T
•
DS 3200 S
•
DS 3200 T
•
DS 3800 S
•
DS 3800 T
DS 4200 S
•
DS 4200 T
DS 4500 S
•
DS 4500 T
8460 IC
•
8460
8530 IC
•
8530
8550 BOSS
DSF 4200
8465 ERGO
8535 ERGO
DS 2600 4S
•
DS 3600 4S
•
DS 3600 4T
DISCONTINUED MODELS
DS 2500 S
•
8060
8250 IC
•
8250
•
8250 IC ERGO
•
8250 ERGO
•
8250 ICD
•
8300 IC
•
8300
•
8350 IC
•
8350
8400 IC
•
8400
8355
8405
STARK 25 D
•
DS 2800 D
•
•
STARK 42
STARK 42 IC
•
standard equipment
compatible tools
Brushcutters
•
•
•
•
•
•
•
•
•
•
•
•
•
•
83
Brushcutters
Greenline type
High quality bright green (exclusive Emak colour) line supplied with 4 different profiles: round, four-lobed, five-lobed, and silent. Made of
a high-tech polyamide monofilament with a high percentage of Nylon PA 6/6, blended with special components to impart high exterior
wear resistance and interior breaking strength. Special plasticizers impart properties of softness to ensure high flexibility. Finally, an oilbased surface treatment reduces problems of sticking and welding between adjacent windings of line during intensive use in critical
conditions and when subject to vibration. The “Silentline” version features a special profile to achieve a significant reduction in noise
levels.
Range
Type
Greenline
round
Greenline
five-lobed
Greenline
four-lobed
Silentline
84
Diameter
mm inches
Length (m)
Part number
Package
1.3
.050”
15
63040048
Roll
1.6
.065”
15
63040049
Roll
2.0
.080”
15
63040050
Roll
2.4
.095”
15
63040051
Roll
3.0
.119”
15
63040052
Roll
3.5
.139”
15
63040170
Roll
1.3
.050”
100
63040054
Blister
1.6
.065”
196
63040055
Blister
2.0
.080”
126
63040056
Blister
2.4
.095”
87
63040057
Blister
2.7
.106”
75
63040180
Blister
3.0
.119”
56
63040058
Blister
3.5
.139”
41
63040171
Blister
2.4
.095”
349
63040060
Reel
3.0
.119”
223
63040061
Reel
3.5
.139”
165
63040172
Reel
2.4
.095”
15
63040063
Roll
3.0
.119”
15
63040064
Roll
2.4
.095”
112
63040065
Blister
3.0
.119”
71
63040066
Blister
2.4
.095”
447
63040067
Reel
3.0
.119”
286
63040068
Reel
2.4
.095”
15
63040069
Roll
3.0
.119”
15
63040070
Roll
2.4
.095”
69
63040071
Blister
3.0
.119”
44
63040072
Blister
3.5
.139”
32
63040176
Blister
2.4
.095”
274
63040073
Reel
3.0
.119”
175
63040074
Reel
3.5
.139”
162
63040177
Reel
1.6
.065”
15
63040075
Roll
2.0
.080”
15
63040076
Roll
Greenline
Roll
Blister
Greenline
Greenline
Reel
Silentline
Roll
First round section line
Dual layer professional line. This is a professional line that combines two different materials: the core material offers excellent
breaking strength while the surface layer is made of material assures high resistance to wear. The two materials are coextruded
and the resulting line is more durable than conventional lines.
Range
Type
Diameter
mm inches
First
round
Length (m)
Part number
Package
3,0
.119”
56
63040091
Blister
3,0
.119”
124
63040092
Reel
3,5
.139”
41
63040093
Blister
3,5
.139”
91
63040094
Reel
Brushcutters
First
Reel
Blister
First
Set of 50 pieces for multi-line heads
Description
Part number
Set of 50 pieces, Ø 3 mm four-lobed,
length 300 mm
4180963A
Set of 50 pieces, Ø 3.5 mm four-lobed,
length 300 mm
4180965A
85
Brushcutters
“Tap’n go” heads with 2 nylon lines
Machines (discontinued models)
Description
Part number
ø 105 mm, M8x1.25 left-hand female thread, with 2.00 mm line,
counter-clockwise
ø 105 mm, M8x1.25 left-hand male thread, with 2.00 mm line,
counter-clockwise
ø 130 mm, M8x1.25 left-hand female thread, with 2.00 mm line,
counter-clockwise
counter-clockwise
counter-clockwise
counter-clockwise
ø 105 mm, M8x1.25 right-hand female thread, with ø 2.00 mm line,
clockwise
ø 105 mm, M8x1.25 right-hand male thread, with ø 2.00 mm line,
clockwise
6106 2023A
For model Stark 26 TR
6302 9008A
For models 8220 IC/8260 IC/Stark 26 IC/Stark 26
4199 040AR
For model 8200
6301 9001C
6113 0055
For models 8220 IC/8260 IC/Stark 26 IC/Stark 26/8460
(male head)/8530 (male head)/8550 Boss (male head)
For models 8460 (male head)/8530 (male head)/
8550 Boss (male head)
For model 8250 R
6307 9001
For model 8250 RL
6301 9007C
6303 9001B
Multi-line heads with 6 and 8 lines
86
Machines (discontinued models)
Description
Part number
ø 2.75”/73 mm, 6 square 3 mm section lines, 20-25.4 mm bore
4180 052A
For models 8220 IC/8260 IC/Stark 26 IC/Stark 26
ø 2,75”/73 mm, 8 square section 3.3 mm lines,
20-25.4 mm bore “pro”
4180 058
ø 2,75”/73 mm, 8 square section 3.3 mm lines,
20-25.4 mm bore “super pro”
4180 057
ø 5,2”/137 mm, 8 square section 3 mm lines, 20-25.4 mm bore
4180 961A
A convincing response
to every need: machines that make
an expert of any user.
Lawnmowers
87
Lawnmowers
88
Lawnmowers
From small private gardens to large parks: Efco offers lawn-mowing solutions tailored to meet a range of specific needs.
The push type for more restricted spaces where manoeuvrability is particularly important; self-propelled for larger
gardens in order to facilitate the operator’s task. Efco lawnmowers are available with different technical specifications
designed to satisfy every type of requirement. Options include separate cutting height for each wheel or centrallycontrolled, manual or electric starting, electric motor or engine.
New cutting height adjustment
levers which are both ergonomic
and simple to operate.
Models with high wheels (200 mm
front and 280 mm rear), ideal for
any terrain.
New ergonomic propulsion and
brake levers are contoured
anatomically to fit the hand,
providing a secure and comfortable
grip at all times.
Lawnmowers in the LR 48, LR 53, AR
48 and AR 53 series can be converted
to operate as mulch mowers: plug
supplied as standard with models AR
44, AR 48 - AR 53 (except for Emak
engine); optional in the LR 48 - LR
53 models (standard in the Honda
ALLROAD models).
Steel wheels: affording greater
strength for intensive uses (models
with 46-51 cm cut, power driven).
New belt guard: guarantees
maximum protection to the drive
belt even when operating in tough
conditions, with tall and thick grass
to negotiate (LR and AR series).
New
professional
3-speed
transmission allows selection of
ground speed to suit the nature of
the work and the type of terrain
(MR 55).
Front and sides with strong,
amply proportioned metal guards
affording maximum protection even
in the event of accidental impact
against walls or fences (MR 55).
l’altra da 5 mm a 3,75 mm
Electric lawnmowers with plastic deck
Product
Deck
Cutting width
Propulsion
Cutting adjustment
Cutting height
PR 35
polypropylene 0.9 kW
Power
33 cm
push
independent
20-36-52 mm 25 L
Grass box capacity
11.3 Kg
Weight
PR 35 S
ABS
1.1 kW
33 cm
push
independent
20-36-52 mm 25 L
12.2 Kg
PR 40 S
ABS
1.3 kW
38 cm
push
independent
28-44-60 mm 40 L
15.0 Kg
Weight
Lawnmowers
Lawnmowers
Electric lawnmowers with steel deck
Product
Deck
Power
Cutting width
Propulsion (speed)
Cutting adjustment
Cutting height
LR 44 PE
steel
1.5 kW
41 cm
push
independent
from 28 to 75 mm 60 L
Grass box capacity
20.6 Kg
LR 48 PE
steel
1.6 kW
46 cm
push
independent
24.9 Kg
LR 48 TE
steel
1.8 kW
46 cm
self-propelled (3.6 Km/h) central
29.3 Kg
Weight
Push-type lawnmowers with steel deck
Product
Deck
Displacement Engine make/model
Cutting width
Propulsion
Cutting adjustment
Cutting height
LR 44 PK
steel
140 cm3 Emak K 500 OHV
41 cm
push
independent
Grass box capacity
23.7 Kg
LR 44 P
steel
148 cm3 Briggs & Stratton 450 series 41 cm
push
independent
23.6 Kg
LR 48 PK
steel
46 cm
push
independent
25.4 Kg
LR 53 PK
steel
51 cm
push
independent
30.0 Kg
Cutting adjustment
Cutting height
Weight
Self-propelled lawnmowers with steel deck
Product
Deck
Cutting width
Propulsion (speed)
LR 44 TK
steel
41 cm
Grass box capacity
27.0 Kg
LR 48 TK
steel
46 cm
30.5 Kg
LR 53 TK
steel
51 cm
30.1 Kg
Weight
COMFORT series push-type lawnmowers with steel deck
Product
Deck
Cutting width
Propulsion
Cutting adjustment
Cutting height
LR 44 PK COMFORT
steel
41 cm
push
independent
Grass box capacity
27.0 Kg
LR 44 PB COMFORT
steel
158 cm3 Briggs & Stratton serie 500 41 cm
push
independent
23.6 Kg
LR 48 PK COMFORT
steel
46 cm
push
independent
25.4 Kg
LR 48 PBQ COMFORT
steel
push
independent
25.7 Kg
LR 53 PBX COMFORT
steel
push
independent
30.0 Kg
Propulsion (speed)
Cutting adjustment
Cutting height
Weight
COMFORT series self-propelled lawnmowers with steel deck
Product
Deck
LR 48 TBQ COMFORT
steel
Cutting width
Grass box capacity
LR 48 TBX COMFORT
steel
31.0 Kg
LR 53 TBX COMFORT
steel
34.0 Kg
Cutting height
Weight
30.1 Kg
ALLROAD series self-propelled lawnmowers with steel deck
Product
Deck
Cutting width
Propulsion (speed)
LR 48 TK ALLROAD
steel
46 cm
Cutting adjustment
Grass box capacity
32.0 Kg
LR 48 TH ALLROAD
steel
135 cm3 Honda GCV 135
46 cm
30.0 Kg
LR 53 TK ALLROAD
steel
51 cm
33.8 Kg
LR 53 THX ALLROAD
steel
160 cm3 Honda GCV 160-A2
51 cm
34.0 Kg
LR 55 VBX 4-IN-1
steel
s.-p. and variable speed drive central
(from 2.5 to 5 Km/h)
40.0 Kg
Weight
Professional lawnmowers with aluminium deck, AR 44 series
Product
Deck
Propulsion (speed)
Cutting adjustment
Cutting height
AR 44 PBX
aluminium
Cutting width
push
central
Grass box capacity
31.0 Kg
AR 44 TBX
aluminium
34.6 Kg
Weight
Product
Deck
Cutting width
Propulsion (speed)
Cutting adjustment
Cutting height
AR 48 PK
aluminium
46 cm
push
central
34.2 Kg
AR 48 TK
aluminium
46 cm
37.1 Kg
AR 48 TBX
aluminium
37.0 Kg
AR 48 TH
aluminium
35.7 Kg
Cutting height
Weight
46 cm
Grass box capacity
Product
Deck
Cutting width
Propulsion (speed)
AR 53 TK
aluminium
51 cm
37.5 Kg
AR 53 TBX
aluminium
38.0 Kg
AR 53 TBXE
aluminium
39.5 Kg
AR 53 TBDF
aluminium
40.2 Kg
AR 53 VBD
aluminium
s.-p. and variable speed drive central
(from 2.5 to 4.5 Km/h)
39.7 Kg
AR 53 THX
aluminium
36.9 Kg
Propulsion (speed)
Cutting height
Weight
51 cm
Cutting adjustment
Grass box capacity
Professional lawnmowers with aluminium deck, MR 55 series
Product
Deck
MR 55 TBD
aluminium
Cutting width
42.7 Kg
MR 55 TBI
aluminium
3 speeds
central
48.0 Kg
MR 55 HXF
aluminium
163 cm3 Honda GXV 160
3 speeds
central
51.0 Kg
53 cm
Cutting adjustment
Grass box capacity
89
Lawnmowers
Electric lawnmowers with plastic deck
Machines designed for home use in small and medium-sized gardens (up to about 550 m2), available with polypropylene
(PR 35) or ABS (PR 35 S, PR 40 S) deck.
These lightweight models feature great manoeuvrability, eye-catching design and easy maintenance making them the
ideal solution for homeowners seeking a user-friendly machine.
In fact, the compact size allows easy transport and storage (the folding handle reduces overall dimensions still further).
Engine brake activated upon releasing the brake lever, adjustable cutting height with 3 settings.
PR 35
Deck
polypropylene
Power
0.9 kW
Cutting width
33 cm
Propulsion
push
Cutting adjustment
independent
Cutting height
20-36-52 mm
Grass box capacity
25 L
Weight
11.3 Kg
300 m2
PR 35 S
Deck
ABS
Power
1.1 kW
Cutting width
33 cm
Propulsion
push
Cutting adjustment
independent
Cutting height
20-36-52 mm
Grass box capacity
25 L
Weight
12.2 Kg
300 m2
PR 40 S
90
Deck
ABS
Power
1.3 kW
Cutting width
38 cm
Propulsion
push
Cutting adjustment
independent
Cutting height
28-44-60 mm
Grass box capacity
40 L
Weight
15.0 Kg
550 m2
These user-friendly models with excellent collection capacity are ideal for the maintenance of medium-sized private
grounds.
Lawnmowers
Electric lawnmowers with steel deck
Rugged and practical, they mount bush wheels for smooth running even on rough ground.
Self-propelled model also available. This combines the advantages of the electric motor (simple operation, low noise) with
all the convenience of powered propulsion: ideal for gardens with a gentle gradient or undulating surfaces.
Equipped as standard with a mulching blade that chops up clippings finely so they take up less space in the 60 litre
catcher.
LR 44 PE
Deck
steel
Power
1.5 kW
Cutting width
41 cm
Propulsion
push
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
20.6 Kg
600-800 m2
LR 48 PE
Deck
steel
Power
1.6 kW
Cutting width
46 cm
Propulsion
push
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
24.9 Kg
700-800 m2
LR 48 TE
Deck
steel
Power
1.8 kW
Cutting width
46 cm
Propulsion (speed)
self-propelled (3.6 Km/h)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
29.3 Kg
800-900 m2
91
Lawnmowers
Machines for private users designed to mow larger areas (up to 1400 m2 in the 53 cm model), but with an eye to
cost efficiency.
They mount ball-bearing wheels for smoother operation.
The cutting height is independent and adjustable on each wheel in 4 positions.
All models equipped as standard with a mulching blade that chops up clippings into fine fragments, reducing their
volume inside the 60 litre catcher.
Machine is converted to mulch-only operation by closing off the rear duct with a special plug, available as optional
extra with models LR 48 and LR 53.
Thanks to this system the grass is repeatedly shredded into a superfine particulate which is spread evenly over
the turf. The shredded cuttings decompose rapidly and are transformed into a natural fertiliser which supplies vital
organic substances for a healthy lawn.
LR 44 PK
Deck
steel
Displacement
140 cm3
Engine make/model
Emak K 500 OHV
Cutting width
41 cm
Propulsion
push
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
23.7 Kg
800-1000 m2
LR 44 P
Deck
steel
Displacement
148 cm3
Engine make/model
Briggs & Stratton 450 series
Cutting width
41 cm
Propulsion
push
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
23.6 Kg
800-1000 m2
LR 48 PK
92
Deck
steel
Displacement
140 cm3
Engine make/model
Emak K 500 OHV
Cutting width
46 cm
Propulsion
push
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
25.4 Kg
1000-1400 m2
Lawnmowers
LR 53 PK
Deck
steel
Displacement
159 cm3
Engine make/model
Emak K 650 OHV
Cutting width
51 cm
Propulsion
push-type
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
30.0 Kg
1400 m2
93
Lawnmowers
Self-propelled lawnmowers with steel deck
These mechanically-driven models are the right choice for larger areas (up to 2000 m2 in the case of the 51-cm model) and
for rough, inaccessible or gently-sloping ground.
Features one-piece handle and ball-bearing wheels for smoother operation.
A lever allows adjustment of the centrally-controlled cutting height to suit specific requirements.
All models equipped as standard with a mulching blade that chops up clippings into fine fragments, reducing their volume
inside the 60 litre catcher.
Machine is converted to mulch-only operation by closing off the rear duct with a special plug, available as optional extra with
models LR 48 and LR 53.
Absolutely straightforward to install, this accessory serves to distribute finely shredded grass cuttings over the lawn surface,
dispensing with the need for collection and disposal.
LR 44 TK
Deck
steel
Displacement
140 cm3
Engine make/model
Emak K 500 OHV
Cutting width
41 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
27.0 Kg
1000-1200 m2
LR 48 TK
Deck
steel
Displacement
140 cm3
Engine make/model
Emak K 600 OHV
Cutting width
46 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
30.5 Kg
1400-1800 m2
LR 53 TK
94
Deck
steel
Displacement
159 cm3
Engine make/model
Emak K 650 OHV
Cutting width
51 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
30.1 Kg
1600-2000 m2
Machines for private users designed to mow larger areas (up to 1400 m² in the 53 cm model), with an emphasis on
ergonomic solutions and a functional design.
•
•
•
•
•
•
Lawnmowers
Models in the COMFORT line include a fabric and plastic grass catcher and wheels with new design and tread profile,
mounted on bearings for smooth running.
The cutting height is independent and adjustable on each wheel in 4 positions, by means of ergonomic knobs.
inside the 60 litre catcher.
The ergonomic engine brake lever ensures a consistently safe grip and comfortable operation.
Machine is converted to mulch-only operation by closing off the rear duct with a special plug, available as an optional
extra with models LR 48 and LR 53.
Thanks to this system the grass is repeatedly shredded into a superfine particulate which is spread evenly over the
turf. The shredded cuttings decompose rapidly and are transformed into a natural fertiliser which supplies vital organic
substances for a healthy lawn.
LR 44 PK COMFORT
Deck
steel
Displacement
140 cm3
Engine make/model
Emak K 500 OHV
Cutting width
41 cm
Propulsion
push-type
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
27.0 Kg
800-1000 m2
LR 44 PB COMFORT
Deck
steel
Displacement
158 cm3
Engine make/model
Cutting width
41 cm
Propulsion
push-type
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
23.6 Kg
800-1000 m2
LR 48 PK COMFORT
Deck
steel
Displacement
140 cm3
Engine make/model
Emak K 500 OHV
Cutting width
46 cm
Propulsion
push-type
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
25.4 Kg
1000-1400 m2
95
Lawnmowers
LR 48 PBQ COMFORT
Deck
steel
Displacement
158 cm3
Engine make/model
Cutting width
46 cm
Propulsion
push-type
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
25.7 Kg
1000-1400 m2
LR 53 PBX COMFORT
96
Deck
steel
Displacement
190 cm3
Engine make/model
Cutting width
51 cm
Propulsion
push-type
Cutting adjustment
independent
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
30.0 Kg
1400 m2
These mechanically-driven models are the right choice for larger areas (up to 2000 m² in the case of the 51 cm
model) and for rough, inaccessible or gently sloping ground.
•
•
•
•
•
•
Lawnmowers
COMFORT series self-propelled lawnmowers with steel deck
Models in the COMFORT line include a fabric and plastic grass catcher and wheels with new design and tread profile,
mounted on bearings for smooth running.
Equipped with a panel (except for 48 TBQ model) incorporating all the main controls, located conveniently to hand.
Equipped with clutch and engine brake levers to ensure a consistently safe grip and comfortable operation.
A lever allows adjustment of the centrally-controlled cutting height to suit specific requirements.
inside the 60-litre catcher.
Machine is converted to mulch-only operation by closing off the rear duct with a special plug. Absolutely straightforward
to install, this accessory serves to distribute finely shredded grass cuttings over the lawn surface, dispensing with the
need for collection and disposal.
LR 48 TBQ COMFORT
Deck
steel
Displacement
158 cm3
Engine make/model
Cutting width
46 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
30.1 Kg
1400-1800 m2
LR 48 TBX COMFORT
Deck
steel
Displacement
190 cm3
Engine make/model
Cutting width
46 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
31.0 Kg
1400-1800 m2
LR 53 TBX COMFORT
Deck
steel
Displacement
190 cm3
Engine make/model
Cutting width
51 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
34.0 Kg
1600-2000 m2
97
Lawnmowers
Range of steel deck lawnmowers with 46 and 51 cm cutting width and high wheels (200 mm front and 280 mm rear);
the customary strength of our steel deck models is now complemented by a smoother running action, even on rough
terrain.
Large-sized wheels: 200 mm front wheels and 280 mm rear wheels. Configuration which guarantees smoother running on
uneven ground and greater overall manoeuvrability.
New engine brake and traction levers in plastic, for a consistently safe and comfortable grip.
Handlebar with soft rubber grip (excluding TK model).
New, 6-position cutting height adjustment lever with a reinforced and ergonomic design.
Front bumper for protection against impact (except for Emak engine).
Mulching plug fitted as standard (Honda engine version).
LR 48 TK ALLROAD
Deck
steel
Displacement
159 cm3
Engine make/model
Emak K 650 OHV
Cutting width
46 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
32.0 Kg
1400-1800 m2
LR 48 TH ALLROAD
Deck
steel
Displacement
135 cm3
Engine make/model
Honda GCV 135
Cutting width
46 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
30.0 Kg
1400-1800 m2
LR 53 TK ALLROAD
98
Deck
steel
Displacement
196 cm3
Engine make/model
Emak K 800 OHV
Cutting width
51 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
33.8 Kg
1600-2000 m2
LR 53 THX ALLROAD
Deck
steel
Displacement
160 cm3
Engine make/model
Honda GCV 160-A2
Cutting width
51 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 28 to 75 mm
Grass box capacity
60 L
Weight
34.0 Kg
Lawnmowers
1600-2000 m2
LR 55 VBX 4-IN-1
Deck
steel
Displacement
190 cm3
Engine make/model
Cutting width
53 cm
Propulsion (speed)
self-propelled, variable speed drive
(from 2.5 to 5 Km/h)
Cutting adjustment
central
Cutting height
from 25 to 82 mm
Grass box capacity
80 L
Weight
40.0 Kg
1800-2200 m2
99
Lawnmowers
A new line of aluminium deck lawnmowers that will make the job of tending medium size gardens (up to 1200-1600 m2)
a real pleasure, saving time and trouble. Optimum results guaranteed in both collecting and mulching modes.
Deck, housing, fan and duct designed to generate and exploit the flow of air and clippings to maximum advantage,
ensuring optimum fill of the grass catcher.
Metal wheels running on ball-bearings (self-propelled version) provide increased resistance to wear, as well as
added stability and smooth running.
Central cutting height adjustment operated by a handy knob located on the front of the deck.
Height adjustable and collapsible handlebar: maximum convenience for the user, minimal space required for storage.
Capacious 60 litre grass catcher with handle, and plastic top shielding the operator from dust entrained in surplus
air expelled through the side vents.
Swift and simple conversion to mulching mode, with no tools required: grass catcher replaced by a special plug
closing off the discharge duct. Mulching blade and plug supplied as standard.
AR 44 PBX
Deck
alluminium
Displacement
190 cm3
Engine make/model
Cutting width
43 cm
Propulsion
push
Cutting adjustment
central
Cutting height
from 25 to 70 mm
Grass box capacity
60 L
Weight
31.0 Kg
1200-1600 m2
AR 44 TBX
100
Deck
alluminium
Displacement
190 cm3
Engine make/model
Cutting width
43 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 25 to 70 mm
Grass box capacity
60 L
Weight
34.6 Kg
1200-1600 m2
Designed to meet the needs of the user looking for maximum performance in both collecting and mulching modes.
These are machines characterized by a superior grass collecting capability, thanks to an aerodynamically moulded
deck that optimizes the flow of air and clippings into the catcher.
Lawnmowers
Cut grass is finely chopped by the factory fitted mulch blade, so that the volume of the clippings in the 75 litre catcher is
much reduced.
Fast conversion to mulching mode: when the catcher outlet duct is closed off with a special plug (supplied as standard
with the machine, except for versions with Emak engine), clippings are forced to swirl for longer under the deck, and
chopped repeatedly by the mulching blade.
The finely fragmented clippings are spread over the lawn; decomposing quickly, the fragments turn into a natural fertilizer,
adding moisture and organic substances to help condition the turf.
Centralized cutting height adjustment, operated by way of a handy front knob.
Self-propelling models are also equipped with metal wheels that turn on ball bearings, ensuring long–life performance and
increased durability (except for versions with Emak engine).
AR 48 PK
Deck
aluminium
Displacement
159 cm3
Engine make/model
Emak K 650 OHV
Cutting width
46 cm
Propulsion
push-type
Cutting adjustment
centralised
Cutting height
from 25 to 65 mm
Grass box capacity
75 L
Weight
34.2 Kg
2000-2400 m2
AR 48 TK
Deck
aluminium
Displacement
159 cm3
Engine make/model
Emak K 650 OHV
Cutting width
46 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 25 to 65 mm
Grass box capacity
75 L
Weight
37.1 Kg
2000-2400 m2
AR 48 TBX
Deck
aluminium
Displacement
190 cm3
Engine make/model
Cutting width
46 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 25 to 65 mm
Grass box capacity
75 L
Weight
37.0 Kg
2000-2400 m2
101
Lawnmowers
AR 48 TH
Deck
aluminium
Displacement
135 cm3
Engine make/model
Honda GCV 135
Cutting width
46 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 25 to 65 mm
Grass box capacity
75 L
Weight
35.7 Kg
2000-2400 m2
A range of tough machines in diecast aluminium suitable for areas up to 2400 m2.
Equipped as standard with a mulching blade that reduces clippings to tiny fragments, minimizing the space occupied in
the 75 litre catcher; this in turn means fewer emptying stops.
The mower can also be converted to operate as a mulcher by closing off the rear duct with a special plug supplied as
standard; with this setup, the grass clippings swirl under the deck and are chopped repeatedly before dropping onto the
lawn to provide a beneficial organic fertilizer (except for Emak engine).
Self-propelling models are also equipped with a special rubber covered handgrip for extra comfort, and with metal wheels
turning on ball bearings, ensuring maximum resistance to wear and increased durability (except for Emak engine).
The cutting height is infinitely variable, and adjusted by way of a centralized mechanism operated from a front knob.
Also available is the TBDF professional model, with a blade brake that can be applied to keep the engine running
while the blade stays motionless: this allows the operator to empty the clippings bag without having to stop and
restart the machine.
AR 53 TK
Deck
aluminium
Displacement
196 cm3
Engine make/model
Emak K 800 OHV
Cutting width
51 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 25 to 65 mm
Grass box capacity
75 L
Weight
37.5 Kg
2000-2400 m2
AR 53 TBX
102
Deck
aluminium
Displacement
190 cm3
Engine make/model
Cutting width
51 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 25 to 65 mm
Grass box capacity
75 L
Weight
38.0 Kg
2000-2400 m2
AR 53 TBXE *
Deck
aluminium
Displacement
190 cm3
Engine make/model
Cutting width
51 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 25 to 65 mm
Grass box capacity
75 L
Weight
39.5 Kg
Lawnmowers
2000-2400 m2
AR 53 TBDF
Deck
aluminium
Displacement
160 cm3
Engine make/model
Cutting width
51 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 25 to 65 mm
Grass box capacity
75 L
Weight
40.2 Kg
2000-2400 m2
AR 53 VBD
Deck
aluminium
Displacement
160 cm3
Engine make/model
Cutting width
51 cm
Propulsion (speed)
(from 2.5 to 4.5 Km/h)
Cutting adjustment
central
Cutting height
from 25 to 65 mm
Grass box capacity
75 L
Weight
39.7 Kg
2000-2400 m2
AR 53 THX
Deck
aluminium
Displacement
160 cm3
Engine make/model
Honda GCV 160
Cutting width
51 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 25 to 65 mm
Grass box capacity
75 L
Weight
36.9 Kg
* with electric start.
2000-2400 m2
103
Lawnmowers
Professional lawnmowers with aluminium deck, MR 55 series
With their extremely solid construction and superior collection capacity, even when operating on wet grass, these
models have all the attributes sought after by professional groundsmen and gardeners. Ideal for larger areas (2300 m2
and over) and for intensive and continuous duties, these are machines that guarantee top reliability and unwavering
quality over time.
Deck protected at front and sides by strong, amply proportioned metal guards.
Large diameter wheels guarantee smooth progress on any type of surface. Quality remains undiminished over time.
New professional 3-speed transmission with aluminium components, allowing selection of ground speed to suit the
nature of the work and the type of terrain.
Cutting height adjustable centrally through fixed increments by way of handy lever.
Superior collection capacity assured by a wide discharge duct and aerodynamically contoured interior of the deck.
80 litre collection bag allowing longer periods between emptying stops, and equipped with a protective canvas top
preventing exposure of the operator to dust.
HXF model equipped with powerful Honda GXV 160 engine, three-speed transmission and blade brake.
Mulching blade and plug supplied as standard.
MR 55 TBD
Deck
aluminium
Displacement
160 cm3
Engine make/model
Cutting width
53 cm
Propulsion (speed)
Cutting adjustment
central
Cutting height
from 20 to 75 mm
Grass box capacity
70 L
Weight
42.7 Kg
2300-2600 m2
MR 55 TBI
Deck
aluminium
Displacement
190 cm3
Engine make/model
Cutting width
53 cm
Propulsion
3 speeds
(1ª: 2.2 – 2ª: 3.6 – 3ª: 4.5 Km/h)
Cutting adjustment
central
Cutting height
from 20 to 75 mm
Grass box capacity
80 L
Weight
48.0 Kg
2300-2600 m2
MR 55 HXF
104
Deck
aluminium
Displacement
163 cm3
Engine make/model
Honda GXV 160
Cutting width
53 cm
Propulsion
3 speeds
(1ª: 2.2 – 2ª: 3.6 – 3ª: 4.5 Km/h)
Cutting adjustment
central
Cutting height
from 20 to 75 mm
Grass box capacity
80 L
Weight
51.0 Kg
2300-2600 m2
Ensuring the soil can breathe and feed:
basic essentials for a lush, green lawn.
Scarifiers
105
Scarifiers
106
Scarifiers
Designed and engineered for demanding home users, and for professional gardeners and groundsmen, these are the
ideal machines for freeing turf of moss and weeds. Lawns should be aerated at least twice during the course of the year,
so that the soil can breathe, and so that moisture, air and nutrients can penetrate more readily down to the roots of the
grass, favouring steady and healthy growth.
Tough spikes of hardened steel
(floating, on 50 H60 model),
effective even on the hardest soils.
Smooth progress on surfaces of
any kind, assured by robust wheels
turning on bearings (metal, 50 H60
model).
Reinforced steel deck, designed
to withstand even the harshest of
conditions.
Powerful and reliable Robin and
Honda engines of overhead valve
design, ensuring steady work rate
and maximum power transmission.
Spiked rotor mounted on massive
bearings.
Height adjustment system with
memory: ensures the machine can
be set down at the same height
when repositioned.
Fold-down handlebar released by a
handy lever, designed to save space
during prolonged storage.
Model 40 cm cutting width and
collection box.
Practical and manoeuvrable scarifier per home use on gardens up to 1000 m2. The ideal tool for use with lawnmowers
for turf scarification in preparation for early-season grass cutting, it gets rid of weed, moss and thatch and provides
better aeration of the lawn. Also useful prior to grass seeding and fertilisation, enabling better penetration of the soil.
Scarifiers
Scarifier for home use
Robust steel body and 38 cm cutting width provide the perfect combination of high strength and maximum agility,
ideal for small gardens or lawns surrounded by flower beds and vegetation.
Equipped with 15 sturdy blades for effective turf scarification.
Centralised cutting depth adjustment via a practical lever on the handgrip; can be adapted to different types of grass
and soil.
Fabric collection bag with generous 48-litre capacity, ensures fewer stops to empty clippings.
AG 35 B45
Deck
steel
Displacement
127 cm³
Engine make/model
Cutting width
38 cm
Spike
fixed
Wheels
plastic
Cutting depth
adjustable with memory
Overall dimensions
103x57x96 cm
Weight
30 Kg
< 1000 m2
107
Scarifiers
Professional scarifiers
Lawn scarifiers of rugged construction equipped with powerful engines, designed to ensure even the most stubborn
of soils can be tackled with complete confidence. Regular aerating and mowing will ensure lawns stay lush, green and
healthy.
Tough spikes of hardened steel (floating, on AG 50 model), effective even on the hardest soils and the deepest
depressions.
Height adjustment system with memory: ensures the machine can be set down at the same height when repositioned.
Powerful and reliable Robin and Honda engines of overhead valve design, ensuring steady work rate and maximum
power transmission: an equipment package guaranteed to remove weeds, moss and other residual matter impeding
efficient aeration of the soil.
Smooth progress on surfaces of any kind, assured by robust wheels turning on bearings (metal, on the 50 H60
model), which give the user optimum control over the machine, whatever the operating conditions.
AG 40 R45
Deck
steel
Displacement
160 cm3
Engine make/model
Robin EX13 OHV
Cutting width
40 cm
Spike
fixed
Wheels
plastic
Cutting depth
Overall dimensions
120x68x90 cm
Weight
50 Kg
< 2000 m2
AG 50 H60
108
Deck
steel
Displacement
160 cm3
Engine make/model
Honda GX 160
Cutting width
50 cm
Spike
floating
Wheels
metal with bearings
Cutting depth
Overall dimensions
120x82x102 cm
Weight
65 Kg
> 2000 m2
Powerful cutting with no half-measures:
overgrown areas and long grass no longer
a problem.
Wheeled brushcutters/Flail mowers
109
110
A new range of mowers for demanding home users, produce growers and grounds maintenance professionals. Ideal
for heavier workloads that involve cutting down and removing long, thick grass, clearing undergrowth or mowing along
verges and the banks of ditches. These machines are typified by high strength and cutting power, and by superior
operator comfort, ensuring that professional work of this kind can be completed swiftly and efficiently.
The flail mowers incorporate
a cutting unit rotor which is
supported by reinforced bearings
and shields, making the entire
machine balanced and resistant to
knocks.
The flail mowers feature ergonomic
control levers (wheel lock release,
brakes and gears) all neatly
arranged within easy reach.
The flail mowers incorporate
a reinforced gearbox with a
mechanical 4-speed (3FW+1RV)
transmission consisting of gears in
oil bath.
Large rear wheels ensuring smooth
progress even over work areas with
bumps or depressions.
Three-wheeler 51 models equipped
with a dolly front wheel, to give a
tight turning radius.
Reinforced blade for effective
cutting action even on thicker
vegetation,
brambles
or
undergrowth.
51 VB6 and 52 models with
practical ball joint coupling for
adjustment of handlebar (up-down
and side-to-side).
Reinforced steel decks with large
discharge area for release of cut
material.
Featuring high-strength construction, and at the same time compact and manageable dimensions, these models
provide the perfect helpmate for fruit and produce growers needing to clear medium sized areas of ground overgrown
with weeds, scrub or other invasive vegetation of whatever type.
Centralized cutting height adjustment controlled directly from the handgrip for maximum operator convenience.
Three-wheeler design with a dolly front wheel (metal, on DR 51 VB6 model), to give a tight turning radius and
consequently maximum agility even when negotiating the thickest of vegetation.
Large rear wheels ensuring smooth progress even over work areas with bumps or depressions.
Self-propulsion minimizes operator effort on uneven or sloping ground; DR 51 VB6 model also has variable speed
drive for additional flexibility in adapting ground speed to the nature of the terrain and the vegetation encountered.
Wheeled brushcutters for home use
DR 51 B6
Displacement
190 cm3
Engine make/model
Cutting width
51 cm
Transmission
single speed propulsion
Wheels
3 with plastic front wheel
Cutting height adjustment
central
(controlled from handgrip)
Speed
2.3 Km/h
Weight
55 Kg
> 5000 m2
DR 51 VB6
Displacement
190 cm3
Engine make/model
Briggs & Stratton 825 OHV series
Cutting width
51 cm
Transmission
variable speed drive
Wheels
3 with metal front wheel
central
(controlled from handgrip)
Speed
from 2.5 to 4.5 Km/h
Weight
62 Kg
> 5000 m2
111
Professional wheeled brushcutter
Powerful professional model, designed for produce growers with heavy and constant workloads to manage, and for
greenery maintenance contractors.
2 rear wheels with pneumatic tyres and sculpted tread: these guarantee faultless grip on all types of surface, even
steep gradients, or where rains have turned the soil to mud.
Equipped with professional blade giving a firm and effective cut even in thick undergrowth and on medium diameter
shrubwood.
Has two forward speeds selectable according to the type of soil and vegetation being tackled, and one reverse
speed for manoeuvring and positioning purposes.
Blade drive engaged by operating a lever on the handgrip.
DR 52 VBR6
Displacement
190 cm3
Engine make/model
Briggs & Stratton 825 OHV series
Cutting width
52 cm
Transmission
2 forward speeds + 1 reverse
Wheels
2
via flange
Speed
1st: 2.6 - 2nd: 3.3 Km/h
Weight
82 Kg
> 5000 m2
Flail mower for home use
Extremely robust whilst at the same time compact and easy to handle, this is the ideal tool for clearing brush and debris
or shredding grass on small to medium-sized plots of land.
Transmission with gears in oil bath.
Belt clutch with tensioner; separate controls for the cutting unit and propulsion.
Independent steering clutches on the driving wheels to facilitate all types of manoeuvre.
Adjustable handlebars with 4 height settings and 5 width settings to ensure maximum operator comfort.
Parking brake which inserts automatically on disengagement of the clutch, to prevent dangerous accidental
movements.
Independently controlled wheel lock release.
DR 55 H 6,5
112
Displacement
196 cm3
Engine make/model
Honda GX 200
Cutting width
50 cm – 26 blades
Transmission
self-propelled, single speed
centralised (20 - 80 mm)
Handlebar adjustment
4 height settings +
5 width settings
Wheels
2 + 2 pivoting
Speed
1st: 2.1 Km/h
Dimensions
1640x968x667 cm
Weight
125 Kg
> 3000 m2
Machines designed for professional and intensive work on grass, shoots, twigs and low vegetation, scrub and stubble.
Developed expressly for heavy-duty applications which test normal brushwood cutters to the limit, such as overgrown
areas, roadside verges, steep slopes and undergrowth.
Professional cutting unit with 38/46 Y-shaped flail blades for excellent chopping quality.
Cutting unit rotor supported by reinforced bearings and shields, resulting in a machine which is perfectly balanced and
resistant to accidental knocks.
Ergonomic control levers (wheel lock release, brakes and gears) neatly arranged within easy reach.
Reinforced gearbox with a mechanical 4-speed (3+1) transmission consisting of gears in oil bath.
Comfortable steering handlebar with height and width adjustment, ensures maximum adaptability to suit the operator’s
needs.
Lockable pivoting front wheels (80 cm model) which enable the desired cut line to be maintained even on irregular surfaces.
Professional flail mowers
DR 65 HR 8,5
Displacement
270 cm3
Engine make/model
Honda GX 270
Cutting width
65 cm – 38 blades
Transmission
3 forward speeds + reverse
4 height settings +
5 width settings
Wheels
2 + 2 pivoting with brake
Speed
1st: 1.2 - 2nd: 2.2 - 3rd: 3.4
Rev: 2.2 Km/h
Dimensions
1657x1092x814 cm
Weight
155 Kg
> 5000 m2
DR 80 KR 11
Displacement
429 cm3
Engine make/model
Kohler CH 440
Cutting width
80 cm – 46 blades
Transmission
4 height settings +
5 width settings
Wheels
2 + 2 pivoting with brake
Speed
1st: 1.2 - 2nd: 2.2 - 3rd: 3.4
Rev: 2.2 Km/h
Dimensions
1657x1092x964 cm
Weight
170 Kg
> 5000 m2
113
Pair of metal wheels
Improve grip on hard surfaces.
68242001
Pair of metal wheels
with width adjustment ring
6824 2001
Complete solid tyres kit
Improve grip on hard surfaces.
68242001
114
Pair of 4.00/4 complete solid tyres
with welded hub
6825 0030
Pair of 16-6.50/8 complete solid tyres
6824 0052
DR 80 KR 11
Machines
DR 65 HR 8,5
Part number
DR 55 H 6,5
Wheeled Brushcutters/Flail mowers
Accessories for flail mowers
Ideal workmates that will always
deliver perfect results, and fast.
For people hard to please.
Garden tractors
115
Garden tractors
116
Garden tractors
Ideal for large gardens, parkland and public green spaces. Sturdily built and easy to handle, these machines have a small
turning circle to maximize manoeuvrability in amongst plants and shrubs. Available with mechanical transmission, or with
hydrostatic transmission giving control over direction and speed by way of a single pedal. With side or rear outlet duct for
connection to grass catcher; certain models can be converted by means of a simple kit to operate in mulching mode: in
this instance, the clippings are retained for longer, swirling under the mower deck, and chopped repeatedly before being
deposited in finely fragmented particles that will supply beneficial nutrients to the lawn.
Larger 15-inch front wheels for
enhanced manoeuvrability and
smooth running (93, 102, 106, 124
models).
Transmatic transmission with 7
forward speeds + 7 reverse speeds
controlled using a handy dashmounted lever (STORM, KOMMAND
models).
Reinforced bearings, blade supports
and screens which are designed to
provide long-term durability, even
faced with extremely intensive use
(STORM, KOMMAND models).
STORM, KOMMAND models with
“QuickFit” system: for quick
attachment and removal of the
cutting deck and other accessories
(collection bag and bag holder, front
bumper, trailer and bonnet) in just a
few minutes, without the need for tools.
Cutting deck height adjustment
system governed by a spring which
allows for effortless raising and
lowering by means of a handy lever.
Front axle cast in steel to withstand
even the heaviest of duties and
resist accidental impact (106, 124
models).
Self-locking differential guarantees
maximum grip on any type of
soil and when working on slopes
(TUAREG models).
Mulch/collect “Change
over”
system: using a handy lever, the
operator can close off the collection
duct and switch automatically to
mulching mode, without stopping
(106/17,5 H - 18 H models).
Side-discharge lawn tractors
Product
Cutting width
Propulsion Turning radius
Overall dimensions
Weight
STORM 95/11,5 T 344 cm B&S Powerbuilt serie 3115 AVS
96 cm
7 speed Shift-on-the-go
46 cm
170x104x100 cm
148 Kg
STORM 97/13,5 T 344 cm3
B&S Powerbuilt serie 3130 AVS
96 cm
46 cm
170x104x100 cm
152 Kg
STORM 108/15,5 T 500 cm3
107 cm
46 cm
170x137x100 cm
164 Kg
46 cm
170x137x100 cm
166 Kg
3
107 cm
variable speed
STORM 108/18,5 H 500 cm3
Garden tractors
Garden tractors
Rear-discharge lawn tractors for small and medium-sized areas
Product
Cutting width
Bag Capacity Overall dimensions
Weight
self-propelled,
75 cm
variable speed drive
140 L
170x73x103 cm
116 Kg
EF 72 C/12,5 K M
414 cm3
Emak K 1250 AVD
71 cm
mechanical
70 cm
170 L
186x76x110 cm
161 Kg
EF 72 C/13 H
344 cm3
71 cm
hydrostatic
70 cm
170 L
186x76x110 cm
167 Kg
EF 63 C/6,5 V
190 cm3
B&S serie 875ES Pro
62 cm
Propulsion
Turning radius
Rear-discharge lawn tractors for medium-sized areas
Propulsion
Turning radius
Bag Capacity
Overall dimensions
Weight
KOMMAND 80/12,5 T 344 cm3
76 cm
Product
Cutting width
46 cm
200 L
225x95x109 cm
170 Kg
EF 91 PLUS/14,5 K M 432 cm3
Emak K 1450 AVD
92 cm
5 forward gears + 80 cm
reverse
210 L
219x96x108 cm
180 Kg
KOMMAND 92/13,5 T
344 cm3
92 cm
7 speed
Shift-on-the-go
46 cm
240 L
225x95x109 cm
174 Kg
EF 93 C/13,5 H
344 cm3
92 cm
hydrostatic
80 cm
260 L
219x96x108 cm 189 Kg
Bag Capacity Overall dimensions
Weight
EF 101 C/16 K H 452 cm Emak K 1600 AVD
102 cm
hydrostatic 80 cm
260 L
219x105x108 cm
200 Kg
EF 102 C/18,5 H
500 cm3
102 cm
hydrostatic 85 cm
300 L
230x105x107 cm
227 Kg
EF 106 J/15,5 H
500 cm3
102 cm
hydrostatic 85 cm
300 L
240x106x110 cm
240 Kg
Overall dimensions
Weight
EF 106 J/16 H
479 cm B&S Vanguard V-Twin
102 cm
hydrostatic 85 cm
300 L
240x106x110 cm
250 Kg
EF 106 J/17,5 H
500 cm3
B&S Intek serie 4175 AVS
102 cm
hydrostatic 85 cm
300 L
240x106x110 cm
254 Kg
EF 106 J/18 H
570 cm3
B&S Vanguard V-Twin
102 cm
hydrostatic 85 cm
300 L
240x106x110 cm
254 Kg
EF 106 J/24 H 4x4
724 cm3
B&S serie 8240 V-Twin
102 cm
Rear-discharge lawn tractors for large areas
Product
Cutting width
Propulsion
Turning radius
3
Professional garden tractors with rear-discharge for large areas
Product
Cutting width
Propulsion
Turning radius
Bag Capacity 3
hydrostatic
85 cm
4x4 self-locking
differential
360 L
248x106x130 cm
319 Kg
EF 124 J/22 H
656 cm3
B&S serie 7220 V-Twin
122 cm
hydrostatic 85 cm
360 L
240x126x110 cm
290 Kg
Cutting height
Overall dimensions
Weight
Professional all-terrain garden tractors
Product
Cutting width
Propulsion
Turning radius
TUAREG 92 EVO
570 cm B&S Vanguard V-Twin
92 cm
hydrostatic
65 cm
self-locking
differential
50 - 60 - 75 -
90 mm
210x99x99 cm
260 Kg
TUAREG 92 EVO 4x4
627 cm3
B&S Vanguard V-Twin
92 cm
hydrostatic 65 cm
4x4 self-locking
differential
50 - 60 - 70 -
210x99x99 cm
80 - 100 mm
280 Kg
3
117
Garden tractors
Models with side discharge, presenting compact dimensions and a tight turning radius (just 46 cm) for ease of
manoeuvre even in confined spaces.
Very sturdy thanks to the sheet metal hood and the large wheels (15” x 6.00 front tyres, 20” x 8.00 rear).
“QuickFit” system allowing fitment and removal of deck without the use of tools; floating front bridge to give level
cutting on bumpy terrain.
Transmatic transmission with 7 forward speeds + 7 reverse speeds controlled using a handy dash-mounted lever (95/11,5
– 97/13,5 and 108/15,5 models).
Hydrostatic transmission on models with 107 cm cutting width: smooth speed adjustment by means of a handy lever; for
even, constant and linear propulsion in any conditions.
Cutting height adjusted by way of an ergonomic, low effort lever.
Equipped with towing hitch.
Mulching kit available as an optional.
Only available in certain markets
STORM 95/11,5 T
Displacement
344 cm3
Engine make/model
B&S Powerbuilt 3115 AVS series
Cutting width
96 cm
Propulsion
Speed
from 0 to 8.8 Km/h in forward drive
from 0 to 4.5 Km/h in reverse
Turning radius
46 cm
Overall dimensions
170x104x100 cm
Weight
148 Kg
> 3000 m2
STORM 97/13,5 T
118
Displacement
344 cm3
Engine make/model
Cutting width
96 cm
Propulsion
Speed
Turning radius
46 cm
Overall dimensions
170x104x100 cm
Weight
152 Kg
> 3000 m2
Garden tractors
STORM 108/15,5 T
Displacement
500 cm3
Engine make/model
Cutting width
107 cm
Propulsion
Speed
Turning radius
46 cm
Overall dimensions
170x137x100 cm
Weight
164 Kg
> 5000 m2
STORM 108/18,5 H
Displacement
500 cm3
Engine make/model
Cutting width
107 cm
Propulsion
variable speed
Speed
Turning radius
46 cm
Overall dimensions
170x137x100 cm
Weight
166 Kg
> 6000 m2
119
Garden tractors
Rear-discharge lawn tractors for small and medium-sized areas
Medium-sized rear-discharge lawn tractors combining exceptional toughness with excellent manoeuvrability.
The large discharge chute and full-bag buzzer (72 C) avoid any possible risk of blockage, even when working
on wet grass.
The cutting deck (easily removed and refitted) is height-adjustable and tilts in order to adapt to the type of grass and
ground being mowed.
Battery charger supplied as standard.
EF 63 C/6,5 V
Displacement
190 cm3
Engine make/model
B&S 875ES Pro series
Cutting width
62 cm
Propulsion
Speed
Turning radius
75 cm
Bag capacity
140 L
Overall dimensions
170x73x103 cm
Weight
116 Kg
> 2000 m2
EF 72 C/12,5 K M
Displacement
414 cm3
Engine make/model
Emak K 1250 AVD
Cutting width
71 cm
Propulsion
mechanical
Speed
1st: 1.5 - 2nd: 2.7 - 3rd: 4.0 - 4th: 4.5
5th: 6.8 - Rev: 2.0 Km/h
Turning radius
70 cm
Bag capacity
170 L
Overall dimensions
186x76x110 cm
Weight
161 Kg
> 3000 m2
EF 72 C/13 H
120
Displacement
344 cm3
Engine make/model
Cutting width
71 cm
Propulsion
hydrostatic
Speed
Turning radius
70 cm
Bag capacity
170 L
Overall dimensions
186x76x110 cm
Weight
167 Kg
> 3000 m2
Robust garden tractors which are also compact and easy to handle. Ideal for frequent home use on medium-sized
lawns (over 4,000 m2). Designed with the same technological solutions adopted in our professional models, these
machines transform performance and comfort into sheer enjoyment.
Garden tractors
KOMMAND models: transmatic transmission with 7 forward speeds + 7 reverse speeds controlled using a handy dashmounted lever (80/12,5 T – 92/13,5 T models).
Reinforced bearings, blade supports and screens which are designed to provide long-term durability, even faced with
extremely intensive use.
KOMMAND models with QuickFit system: for quick attachment and removal of the cutting deck and other accessories
(collection bag and bag holder, front bumper, trailer and bonnet) in just a few minutes, without the need for tools.
Cutting deck height adjustment system governed by a spring which allows for effortless raising and lowering by means of
a handy lever.
Extremely small turning radius (only 46 cm) for agile cornering around ornamental plants or shrubs without having to
perform awkward reversing or repositioning manoeuvres.
Gradual and smooth blade actuation by means of the handy dash-mounted lever: ensures quieter operation of the belt
during engagement, fewer vibrations and less wear on the components.
KOMMAND 80/12,5 T
Displacement
344 cm3
Engine make/model
Cutting width
76 cm
Propulsion
Speed
Turning radius
46 cm
Bag capacity
200 L
Overall dimensions
225x95x109 cm
Weight
170 Kg
> 4000 m2
EF 91 PLUS/14,5 K M
Displacement
432 cm3
Engine make/model
Emak K 1450 AVD
Cutting width
92 cm
Propulsion
Speed
1st: 2.2 - 2nd: 3.8 - 3rd: 5.8 - 4th: 6.4 5th: 9.7; 1stRev: 2.8 Km/h
Turning radius
80 cm
Bag capacity
210 L
Overall dimensions
219x96x108 cm
Weight
180 Kg
> 4000 m2
121
Garden tractors
KOMMAND 92/13,5 T
Displacement
344 cm3
Engine make/model
Cutting width
92 cm
Propulsion
Speed
Turning radius
46 cm
Bag capacity
240 L
Overall dimensions
225x95x109 cm
Weight
174 Kg
> 4000 m2
EF 93 C/13,5 H
122
Displacement
344 cm3
Engine make/model
Cutting width
92 cm
Propulsion
hydrostatic
Speed
Turning radius
80 cm
Bag capacity
260 L
Overall dimensions
219x96x108 cm
Weight
189 Kg
> 4000 m2
Lawn tractors designed for the maintenance of bigger gardens, parks and large green areas.
Available with hydrostatic transmission, which allows speed and direction to be controlled with just a single pedal.
Deck made of pressed steel for outstanding long-term durability.
Hydrostatic transmission enables adjustment of the ground speed to match the type of soil and grass to be cut.
Equipped with contra-rotating overlapping blades that guarantee a smooth cut every time. Battery charger supplied as standard (model EF 102 C/18,5H).
All models are equipped with electromagnetic clutch operating the 2 contra-rotating blades directly from the dashboard;
cutting height adjustable through 6 positions.
Garden tractors
Rear-discharge lawn tractors for large areas
EF 101 C/16 K H
Displacement
452 cm3
Engine make/model
Emak K 1600 AVD
Cutting width
102 cm
Propulsion
hydrostatic
Speed
Turning radius
80 cm
Bag capacity
260 L
Overall dimensions
219x105x108 cm
Weight
200 Kg
> 6000 m2
EF 102 C/18,5 H
Displacement
500 cm3
Engine make/model
Cutting width
102 cm
Propulsion
hydrostatic
Speed
Turning radius
85 cm
Bag capacity
300 L
Overall dimensions
230x105x107 cm
Weight
227 Kg
> 6500 m2
EF 106 J/15,5 H
Displacement
500 cm3
Engine make/model
Cutting width
105 cm
Propulsion
hydrostatic
Speed
Turning radius
85 cm
Bag capacity
300 L
Overall dimensions
240x106x110 cm
Weight
240 Kg
> 6000 m2
123
Garden tractors
Professional garden tractors with rear discharge for large areas
Featuring an excellent combination of strength, long-term reliability and appreciable cutting and loading capacity,
these garden tractors are ideal for discerning operators who have to work large expanses of land for long hours.
Deck made of pressed steel (106 models) or reinforced aluminium (124 models).
Pedal-operated Tuff Torque hydrostatic transmission allows the driver to keep hold of the steering wheel at all times, for
better control and safety. Available in 4x4 model with self-locking differential: ideal for steeply sloping terrain.
Clutch pedal release is fluid-controlled, eliminating the risk of unexpected and potentially hazardous changes in speed.
Models 106 J/17,5 H a 106 J/18 H equipped with “Change over” system: a handy lever allows the operator to close off the
discharge tunnel, switching the machine automatically from collection to mulching mode.
New reinforced steering system ensures maximum manoeuvrability with minimal operator effort.
Mulching kit available as optional for remaining 106 models.
124 model features Automat system designed to shut off the blades automatically as soon as the bag is full.
All models equipped with electromagnetic clutch operating the 2 contra-rotating blades directly from the dashboard;
cutting height adjustable through 6 positions.
Maximum ergonomic benefits for the operator thanks to spacious internal layout, pedals with non-slip surface, adjustable
seat and neatly arranged controls all within easy reach.
The bag is emptied directly from the driving position.
Wide 16” wheels, designed with a special tyre tread that will not damage the grass.
EF 106 J/16 H
Displacement
479 cm3
Engine make/model
B&S Vanguard V-Twin
Cutting width
102 cm
Propulsion
hydrostatic
Speed
Turning radius
85 cm
Bag capacity
300 L
Overall dimensions
240x106x110 cm
Weight
250 Kg
> 6500 m2
EF 106 J/17,5 H
124
Displacement
500 cm3
Engine make/model
B&S Intek 4175 AVS series
Cutting width
102 cm
Propulsion
hydrostatic
Speed
Turning radius
85 cm
Bag capacity
300 L
Overall dimensions
240x106x110 cm
Weight
254 Kg
> 7000 m2
EF 106 J/18 H
Displacement
570 cm3
Engine make/model
B&S Vanguard V-Twin
Cutting width
102 cm
Propulsion
hydrostatic
Speed
Turning radius
85 cm
Bag capacity
300 L
Overall dimensions
240x106x110 cm
Weight
254 Kg
Garden tractors
Professional garden tractors with rear discharge for large areas
> 7500 m2
EF 106 J/24 H 4x4
Displacement
724 cm3
Engine make/model
B&S 8240 V-Twin series
Cutting width
102 cm
Propulsion
hydrostatic 4x4, self-locking
differential
Speed
from 0 to 4.5 Km/h in reverse drive
Turning radius
85 cm
Bag capacity
360 L
Overall dimensions
248x106x130 cm
Weight
319 Kg
> 8000 m2
EF 124 J/22 H
Displacement
656 cm3
Engine make/model
B&S 7220 V-Twin series
Cutting width
122 cm
Propulsion
hydrostatic
Speed
Turning radius
85 cm
Bag capacity
360 L
Overall dimensions
240x126x110 cm
Weight
290 Kg
> 9000 m2
125
Garden tractors
Professional all-terrain garden tractors
The TUAREG 92 EVO garden tractors are characterized by extreme toughness and reliability, qualities recommending it
as the ideal machine for clearing and tidying up areas overgrown with thick vegetation, typically on uneven and sloping
terrain.
Equipped with a powerful mower attachment having a single rotary swing-tip blade.
A large tyre footprint and a low centre of gravity combine to give the machine maximum stability, even on steeper gradients
or near banks and ditches.
The operator’s task is made easy by a generous array of features: electro-magnetically operated clutch, hydrostatic
transmission, lockable differential enabling the machine to negotiate conditions of whatever nature on any type of soil,
and centralized cutting height adjustment.
Maximum operator protection, with roll bar, side-impact guards and seat belts.
Four-wheel drive version also available: ideal on particularly uneven or steeply sloping terrain.
TUAREG 92 EVO
Displacement
570 cm3
Engine make/model
B&S Vanguard V-Twin
Cutting width
92 cm
Propulsion
hydrostatic
self-locking differential
Speed
Turning radius
65 cm
Cutting height
50-60-75-90 mm
Overall dimensions
210x99x99 cm
Weight
260 Kg
> 9000 m2
TUAREG 92 EVO 4X4
126
Displacement
627 cm3
Engine make/model
B&S Vanguard V-Twin
Cutting width
92 cm
Propulsion
hydrostatic 4 WD
self-locking differential
Speed
Turning radius
65 cm
Cutting height
50-60-70-80-100 mm
Overall dimensions
210x99x99 cm
Weight
280 Kg
> 9000 m2
Garden tractors
Accessories for garden tractors
TUAREG EVO 4x2 - 4x4
106 J/24 H 4x4
124
122
105 (from the SJ00016390 serial
number) - 106
104 – 105
102 (production 2009)
102
KOMMAND PLUS 105
KOMMAND 92 - KOMMAND PLUS 92
95 - 97 - 107 - 108 - STORM
91 PLUS - 93
90 - 92
72
63
101
Machines
Part number
Mulching kit
This kit serves to shred grass cuttings into very fine particles and distribute them around the base of the grass stems, leaving a perfectly clean lawn
and ensuring a clean and uniform cut.
6800 0004
G999 00035E0
Mulching kit
G999 00036E0
G999 00038E0
6813 0001
6813 0002
G999 00045E0
G999 00055E0
G999 00046E0
6812 0001
6812 0008
6812 0005
6812 0018
6812 0017
Rear discharge deflectors
To discharge the grass cuttings onto the lawn surface when working without a grass catcher.
Baffle
G999 00090E0
G999 00050E0
G999 00051E0
6813 0003
6813 0004
G999 00015E0
G999 00016E0
6812 0003
Battery charger
To keep the battery in good working order during periods of disuse, ensuring the optimum charge level and longer lifetime.
Battery charger
G821 80050E0
Towing kit
G999 00080E2
G999 00081E0
G999 00005E0
G999 00006E0
6812 0007
Towing kit
Makes it possible to tow a small trailer.
127
TUAREG EVO 4x2 - 4x4
106 J/24 H 4x4
124
122
105 (from the SJ00016390 serial
number) - 106
104 – 105
102 (production 2009)
102
KOMMAND PLUS 105
KOMMAND 92 - KOMMAND PLUS 92
95 - 97 - 107 - 108 - STORM
91 PLUS - 93
90 - 92
72
101
Machines
Part number
63
Garden tractors
Accessories for garden tractors
Snow blade
Extremely robust metallic blades, ideal for clearing snow from steps and pedestrian access ways. Available with rubber scraper.
Snow blade
6812 0009
Rubber scraper
6812 0010
6812 0011
Snow blade
connection lange
6812 0015
6812 0016
Snow chains
For enhanced grip and traction when working on snow-covered terrain. Easy fitting and removal. Available for 18” and 20” wheels.
Snow chains
for 20 x 10-8 wheels
6812 0014
Ballast weight
Front-end ballast weight necessary for providing increased grip and stability to the tractor when working on snow-covered terrain. For use in
combination with snow shovel.
Ballast weight 50 Kg
6812 0013
Lawn roller
For compacting the ground after processing. Can be used as a push-type or pull-type device. Can be filled with water for increased weight (up to
114 Kg). Width 61 cm.
Lawn roller
6813 0006
Trailer
Lightweight and durable, ideal for transporting grass cuttings, green waste or other material. Detachable steel frame with reinforced bar. Dimensions:
82 x 108 x 30 cm. Low-profile 14” x 4 tyres.
Trailer
128
6813 0005
Simple, tough and full of energy:
the force of our high-pressure pumps.
Like water gushing from the ground.
Water pumps
129
Water pumps
Water pumps
A complete range of self-priming centrifugal water pumps, suitable for every kind of private and professional
irrigation requirement, as well as building and deflooding services. Lightweight and manageable, but at the same
time tough and extraordinarily reliable. Characterized by a high head-to-flow ratio, these pumps offer maximum
flexibility under any operating conditions, and optimum efficiency even with long suction runs. Engines available
in various displacements, 2-stroke and 4-stroke.
The high flow rate and extended
work cycle allow these pumps
to offer top-quality, non-stop
performance.
Thanks to its plastic body (model
MP 300/MP 3000 (Euro 2)), the
machine is extremely light.
Tough tubular steel frame
facilitating transport of the machine
and affording protection from
accidental impact (models PA 1050,
PA 1100).
Head, H (m)
Steel crankshaft and piston with 2
rings guarantee prolonged service
life.
Generous capacity fuel tanks
allowing long hours operation
between refuelling stops.
Self-priming water pumps
Flow rate Q (l/min)
Tough aluminium pump casing
ensures maximum long-term
durability (PA 1050, PA 1100, PC
1050).
Head, H (m)
Non self-priming water pumps
Flow rate Q (l/min)
Efco models are characterised by an excellent Head/Flow Rate ratio.
130
Pump
Water outflow point
Water pumps
Selection of a water pump made easy
Water supply point
1. Calculate the equivalent length (L) of the pipeline, in metres.
L = L1 + L2 + K
L1 = length of suction run from source to pump, in metres.
L2 = length of pipeline from pump to outflow point, in metres.
K = pressure losses attributable to fittings, if any.
2. Calculate the total head (H) in metres.
H = H1 + H2 + Pr
H1 = suction lift, in metres, between water level and pump (maximum suction lift 7.5 m).
H2 = discharge lift, in metres, between pump and outflow.
Pr = pressure required at outflow point, expressed in metres (1 bar = 10 m).
3. Select the water pump on the basis of the required flow rate.
Referring to the tables on the page opposite, plot the equivalent length value (L) and total head value (H) to obtain the flow rate
(Q, quantity of water pumped) supplied by the pump, in litres per minute. Compare the required flow rate with those of the listed
pumps to find the most suitable model.
Example: if the equivalent length is 100 and the head is 15, the flow rate will be:
- 43 litres per minute for model MP 300, MP 3000 (Euro 2)
- 118 litres per minute for model PA 1050
- 242 litres per minute for model PA 1100
- 125 litres per minute for model PC 1050
131
Water pumps
Selection of a water pump made easy
MP 300 - MP 3000 (Euro 2)
Total head H (m)
Total length of pipeline
Ø 25 mm
1,5
3
5
10
15
20
25
30
5
137
132
128
124
108
98
72
57
20
108
104
100
89
76
63
57
41
50
82
79
76
67
58
46
33
12
100
62
60
57
50
43
34
25
10
200
46
44
42
37
32
25
16
500
28
27
25
22
20
15
L (m)
Flow rate Q (l/min)
PA 1050
Total head H (m)
Ø 40 mm
1,5
3
5
10
15
20
25
30
5
266
260
247
205
185
150
100
50
20
240
230
220
195
167
132
85
45
50
202
195
185
165
142
115
72
40
100
170
162
157
140
118
98
70
37
200
130
127
120
107
92
76
55
500
90
87
82
72
63
51
40
L (m)
Flow rate Q (l/min)
PA 1100
Total head H (m)
Ø 50 mm
L (m)
1,5
3
5
10
15
20
25
30
35
5
520
510
498
453
394
328
255
166
70
20
477
468
450
400
357
290
228
146
60
50
403
395
377
340
295
247
200
128
100
327
318
310
280
242
205
166
111
200
255
247
237
218
186
166
130
94
500
170
166
162
145
130
110
90
70
Flow rate Q (l/min)
L (m)
PC 1050
Total head H (m)
Ø 40 mm
1,5
3
5
10
15
20
25
30
5
308
300
286
250
205
160
120
55
20
270
260
250
220
185
150
100
53
50
222
212
203
180
152
123
90
50
100
177
171
165
148
125
102
78
40
200
137
130
125
110
98
80
58
500
90
88
82
75
65
52
40
L (m)
132
Flow rate Q (l/min)
Compact, lightweight and dependable with a work cycle of 1 hour on a full tank. Ideal for building work or watering
gardens and small plantations.
Water pumps
Self-priming water pumps
Model MP 300 / MP 3000 guarantees low noise levels and minimal vibration thanks to the new lower-speed engine
configuration. Quick and easy starting under any condition is assured by the primer and new digital coil.
New throttle and On-Off switch operated by means of a convenient selector located on the top of the machine body.
The new model also ensures lower fuel consumption (approx. 15% less than equivalent models with Euro 1 engine).
Heat-treated drive shaft, guaranteed rustproof, float-type carburettor, two-stage air filter, chrome cylinder, forgedsteel drive shaft and connecting rod forgiato (PA 1050, PA 1100).
A steel frame is fitted to 1.5” and 2” models in order to protect the pump body and facilitate transport.
MP 300
MP 3000 (Euro 2)
Power 1.3 HP - 1.0 kW
Displacement
30 cm³
Max. flow rate/Max. head
150 L/min/36 m
Suction Ø/Delivery Ø/Suction head 1’’/25.4 mm/7 m
Pump type
centrifugal
Fuel tank capacity
0.83 L
Total dry weight
5.5 Kg
PA 1050
Power 2.1 HP - 1.6 kW
Displacement
50.2 cm³
270 L/min/30 m
Suction Ø/Delivery Ø/Suction head 1.5’’/38.1 mm/7.3 m
Pump type
centrifugal
Fuel tank capacity
1.10 L
Total dry weight
8.5 Kg
PA 1100
Power
3.4 HP - 2.5 kW
Displacement
98.2 cm3
580 L/min/40 m
Suction Ø/Delivery Ø/Suction head 2”/50.8 mm/7.5 m
Pump type
centrifugal
Fuel tank capacity
2.70 L
Total dry weight
14.2 Kg
133
Water pumps
Non self-priming water pump
Safe and silent thanks to the Emak 2-stroke engine, they also feature lightweight aluminium body and practical
handle for easy transport.
The electronic coil and high-inertia flywheel guarantee trouble-free starting at all times.
The capacious fuel tank provides more than one hour of continuous duty before refilling is necessary.
Also feature exhaust with silencer, float-type carburettor, chrome cylinder, forged-steel drive shaft and connecting
rod, two-stage air filter.
Ceramic mechanical seals, guaranteed wear resistant.
PC 1050
Power
2.1 HP - 1.6 kW
Displacement
50.2 cm3
320 L/min/30 m
Suction Ø/Delivery Ø/Suction head 1.50”/38.1 mm/7.3 m
Pump type
centrifugal
Fuel tank capacity
1.10 L
Total dry weight
6.5 Kg
High-pressure water pump
High power delivered by engine with chrome-plated cylinder, float-type carburettor and dual air filter.
Continuous operation of over 1 hour on full fuel tank.
Can be used with a double lance, and fitted with a gauge to monitor operating pressure.
Supplied complete with water filter (brass lance and pressure gauge optional) and equipped with base and carrying
handle.
Designed for use typically on wheelbarrow sprayers with tank capacity of up to 100 litres.
Can also be used independently, connecting the inlet to a tank containing the liquid.
C 19/20
134
Power
2.1 HP - 1.6 kW
Displacement
50.2 cm3
Max. flow rate
19 L/min
Max. pressure
20 Kg/cm2
Weight
10.2 Kg
Water pumps
Accessories for water pumps
C 19/20
PC 1050
PA 1100
MP 300 / MP 3000
PA 1040 - PA 1050
Machines
PA 1030
Part number
Fittings and water filler kit
Kit of reducer fittings complete with seals to ensure perfect watertightness and high performance. Allow easy connection between pump and the
most commonly available rubber hoses.
1” fittings kit
3400 00002
Water filter with 1” fitting
3400 00001
Spiral hose Ø 1” length 4 m
3400 00031
1” 1/2 fittings kit
Water filter with 1” 1/2 fitting
3410 00016A
3410 00017
135
Fittings and water filler kit
C 19/20
PC 1050
PA 1100
MP 300 / MP 3000
Machines
PA 1040 - PA 1050
Part number
PA 1030
Water pumps
Accessories for water pumps
Kit of reducer fittings complete with seals to ensure perfect watertightness and high performance. Allow easy connection between pump and the
most commonly available rubber hoses.
136
Optional curved fitting kit with 1” 1/2
to 1” reduction
3410 00102
Water filter with 1” 1/2 fitting and foot valve
3320 00010
2” fittings kit
3420 00017
Water filter with 2” fitting
3420 00007
Intensive, constant, precision spraying:
only the best treatment for your crops.
Mistblowers
137
Mistblowers
Mistblowers
Backpack mistblowers designed to give users maximum convenience, long uninterrupted spells of operation, and
high efficiency. Easily accessible controls, capacious tanks, aluminium fan, powerful and dependable engines:
everything needed to get the job done quickly and simply. Spray jets adjustable according to the type of treatment
administered and the type of vegetation treated.
The opening angle of the jet
can be adjusted rapidly and
conveniently without having to
stop working, enabling treatment
to be customised according to each
individual type of vegetation (AT
2062).
Accessing the filter is extremely
easy, and does not require the use
of tools, for easier maintenance.
The handle incorporates all the
main controls, within immediate
reach.
Machine equipped as standard with
booster pump, ensuring a longer
throw of sprayed liquids to give
better results on taller vegetation
(AT 2062).
Using the throttle stop, the operator
can adjust the flow of air directly from
the handle to suit the type of work in
hand.
Ergonomic harness, and frame
suspended on antivibration mounts,
for maximum comfort.
Easy-to-install powder kit affords
numerous options for selection of
the quantity delivered.
Kit ULV
With the ULV kit (standard issue),
the atomization of sprayed liquids is
optimized to allow a more targeted
treatment and avoid waste (AT 2062).
138
For treatment and elimination of pests and insects from allotments, small plantations and nurseries. Capable of
spraying both liquids (such as fungicides and pesticides) and powders.
Mistblowers
Backpack mistblowers
The 61.3 cc model has been designed for particularly demanding users, up to date with the best technical solutions.
It is equipped with a standard booster pump for maximum liquid pressure and with a ULV standard kit for excellent
nebulisation.
Adjustable jet opening.
Large paper filter for maximum protection of the engine.
Carburettor with compensator for optimum performance in any working conditions.
Powder kit available as an optional.
AT 2062
Power
4.5 HP - 3.3 kW
Displacement
61.3 cm3
Max. air flow
20.0 m3/min
Air speed
90 m/sec
Liquid delivery rate
0.67 ÷ 5.15 L/min
Liquid tank capacity
16.0 L
Weight
11.5 Kg
AT 800
AT 8000 (Euro 2)
Power
5 HP - 3.7 kW (SAE)
Displacement
72.4 cm3
Max. air flow
16.0 m3/min
Air speed
120 m/sec
Liquid delivery rate
0.5 ÷ 3 L/min
14 L
Weight
12.5 Kg
139
Dusting kit
AT 800 / AT 8000
AT 2090
Machines
AT 2080
Part number
AT 2062
Mistblowers
Accessories for mistblowers
Conversion kit for treatment based on microgranule chemical powder. Rather than entering into contact with the fan, the powder/granules are
conveyed directly into the blower tube.
3562 00114
Dusting kit
5602 2014
Double jet kit
Allows the operator to execute dual treatment with fungicides.
Double jet kit
3651 00062
ULV kit
Provides optimal atomization of the sprayed liquid to ensure targeted treatment eliminating overspray and wastage of product.
ULV kit
3652 00203A
Booster pump
Pump with maximum output pressure to ensure a wider liquid throw.
Booster pump kit
3652 00273R
Kit for conversion of mistblower to blower
Kit for easy conversion of backpack mistblower to professional blower.
Conversion kit from mistblower to blower
140
5602 0129
The value of targeted treatment,
applied only where needed. No waste.
Sprayers
141
Sprayers
142
Sprayers
Ideal for targeted and selective treatments: thanks to the convenient pressure and atomization controls, the
machine can direct the spray just where it is needed, avoiding unnecessary waste and ensuring plants and crops
are not damaged. Long sessions per single fill, thanks to a tank of generous capacity and an engine light on
fuel. High resistance to stress, even when working lengthy stints and operating in hostile conditions: the perfect
machine for the most demanding operator.
The sprayer features a convenient
knob for regulating pressure up to a
maximum of 35 bar.
The sprayer is fitted with “Lift
Starter” for trouble-free starting.
Handy manual adjustment of spray
atomization.
Easy access to air filter and
spark plug for swift and simple
maintenance.
Frame with soft, generously
proportioned cushion; broad straps
in breathable material.
Ample selection of nozzles with
two, three and four orifices for
crops presenting large surface
areas.
Tank breather system preventing
leaks and spills, even accidental.
Easy start assured by “Primer” and “Lift Starter”, a device that automatically switches off the choke by pressing the
throttle right down.
A convenient valve allows accurate pressure regulation to suit desired use.
Handy manual adjustment of spray droplet size.
High operating pressure of up to 35 bar.
The brass pump and chrome pistons offer excellent rust protection and extended service life.
Wide range of nozzles available with multiple jets for wider coverage.
Sprayers
Backpack sprayer
IS 2026
Power
1.2 HP - 0.9 kW
Displacement
25.4 cm3
25 L
Max. delivery rate
8 L/min
Max. pressure
35 Kg/cm2
Weight
9.0 Kg
Accessories for backpack sprayer
Part number
Machines
IS 2026
Extension
Modular 670 mm extension (more than one can be used simultaneously) for targeted treatment in hard-to-reach positions.
Extension
S011 1000R
Jets - Lances
Broad choice of jets with from 1 to 5 holes for differentiated treatments on large surface area crops or in situations in which different atomisation
levels or pressures are required.
Complete adjustable 1-hole jet Ø 1.4 mm
S011 2000R
Standard round jet Ø 1.4 mm
S011 2002
Optional round jet Ø 1.0 mm
5601 0021
Optional round jet Ø 0.8 mm
5601 0022
Fixed 2-jet lance with 0.5 mm diameter holes
S011 3000
S011 4000
S011 5000
S011 6000
143
Sprayers
Accessories for backpack sprayer
Part number
Machines
IS 2026
Connections
Single jet kit with one 0.5 mm diameter hole
5601 2019
Two-way connection with 0.5 mm diameter
jets
5601 0023A
0.5 mm diameter jet (for 2-way connection)
5601 0024A
Bell attachment for localized weed control
Ideal for localized weed control treatment. Complete with jet and connection.
Bell attachment for localized weed control
5601 0019
Standard 0.15 mm diameter jet
5601 0020
Complete spraygun
Complete adjustable spraygun with 1.7 mm diameter jet. The handle can be operated progressively to provide intensive atomization of the liquid from
diffused to a single powerful high-precision jet. The adjustable locking ring makes it possible to set a variety of intermediate positions.
Complete adjustable spraygun with 1.7 mm
diameter jet
5601 0025
Standard 1.7 mm diameter jet for complete
spraygun
5601 0026
Optional 1.4 mm diameter jet for complete
spraygun
5601 0027
Double outlet connection
Fitting for connection of a second lance for multiple treatments.
Double outlet connection
S012 4000
Professional handle for lance
Professional handle for enhanced comfort and improved treatment precision. Equipped with filter to remove impurities from liquid arriving from tank.
Professional handle for lance
S013 0000
Double lance kit
The sprayer is prearranged for use with 2 spray lances. By means of a 2-way connection, in addition to the standard lance supplied with the unit the
operator can connect a second lance for multiple treatments.
Double lance kit with 2-way connection
144
5601 2020A
Available with petrol engines and electric motors capable of generating 20 bars pressure and flow rate of 20 litres/
minute, barrow-mounted pumps can be used for spraying and disinfection treatments on plantations and crops
of medium-large proportions.
Sprayers
Wheelbarrow sprayers
Barrows are equipped with capacious 50 litre and 80 litre tanks guaranteeing lengthy periods of operation between stops.
Good size rubber-tyre wheels ensure easy transit even over rough ground.
Using a hose reel kit (optional), the operator can wind out the hose more easily to reach areas where the vegetation is denser
and less easily accessible.
Also available is an optional towing kit for use with a garden tractor.
IC 2050
Power
2.1 HP - 1.6 kW
Displacement
50.2 cm3
55 L
Max. delivery rate
19 L/min
Max. pressure
20 Kg/cm2
Dimensions
750x656x490 cm
Weight
31 Kg
IC 2080
Power
2.1 HP - 1.6 kW
Displacement
50.2 cm3
80 L
Max. delivery rate
19 L/min
Max. pressure
20 Kg/cm2
Dimensions
800x710x550 cm
Weight
33 Kg
IC 2050 E
Power
1.25 HP - 0.9 kW
55 L
Max. delivery rate
19 L/min
Max. pressure
20 Kg/cm2
Dimensions
750x656x490 cm
Weight
33 Kg
145
Sprayers
IC 2080 E
Power
1.25 HP - 0.9 kW
80 L
Max. delivery rate
19 L/min
Max. pressure
20 Kg/cm2
Dimensions
800x710x550 cm
Weight
34 Kg
Accessories for wheelbarrow sprayers
Towing kit
Needed to hitch the barrow to a garden tractor, facilitating operations over extensive areas.
Towing kit
6880 0001
Hose reel kit
Advantageous for reaching plants and vegetation in awkward areas without fouling the pressure hose.
6880 0006
Hose reel kit. Tube internal diameter 8 mm,
external diameter 14 mm, length 20 m,
operating pressure 40 bar
6880 0002
Complete lance assembly
Complete lance assembly with adjustable nozzle for adapting the atomisation to each type of treatment.
Complete lance assembly
146
U160 30096F
IC 2080 E
IC 2050 E
IC 2080
Machines
IC 2050
Part number
Strength and simplicity in perfect balance:
an invaluable aid for people who love
the arts of cultivation.
Shakers
147
Shakers
148
Shakers
Powerful professional machines ideal for mechanized harvesting of olives and other fruit, offering a level of
efficiency 5 times greater than with manual methods. The design results in a particular configuration that responds
to practical needs in the best way possible: top performance making for maximum productivity and shorter job
times, while guaranteeing constant and lasting quality. Designers have come up with important solutions making
the machines more comfortable to use, even during long hours of operation.
Innovative “Vibcut” anti-vibration
system using springs: the 2 handles
and the part of the machine in
contact with the operator are
completely isolated from vibrations.
Ergonomically contoured harness.
Aluminium extension rod: available
in two lengths, 2 m and 3 m.
Innovative hook system with freely
revolving rollers: branches are
engaged cleanly, without damaging
the bark.
Twist-action rod handgrip, facilitating
contact between hook and branch at
optimum angles.
Prop foot ensures the machine can
be set down on the ground safely.
Speed reduction via oil-immersed
helical gears: maximum strength
to withstand prolonged loading
and guarantee full transmission of
power to the rod.
Metal fuel tank bracket
maximum shock resistance.
for
The new SO 5500 Ergo shaker has been developed to meet the needs of professional olive growers looking for
a harvesting and general maintenance tool that will be highly effective, dependable, comfortable to use, and
particularly gentle on plants.
Shakers
Shaker with hook end
Equipped with a powerful 52.5 cm3 engine, the machine is designed to deliver lasting performance and reliability,
even in tough conditions and when used for long hours at a stretch.
Tough gear case with oil-immersed speed reducer guaranteeing both power and resistance to mechanical stresses.
Innovative “Vibcut” anti-vibration system ensuring complete isolation of the 2 handles and the parts of the machine
in contact with the operator.
Special hook fitted with rubber faced rollers: bark is left unscathed, and shaken plants stay healthy.
Available with 2 m and 3 m extension rods.
SO 5500 ERGO
Displacement
52.5 cm3
Power
2.8 HP/2.1 kW
Air filter
paper element
Carburettor
with compensator
Fuel tank capacity
1.5 L
Extension rod lengths
2 m and 3 m
N° cycles per minute
1360
(at 8000 rpm engine speed)
Hook travel
60 mm
Weight
14.5 Kg (without rod and hook)
Accessories for shakers with hook end
Part number
Machines
SO 5500 ERGO
Extension rods
Treated aluminium extension rods for attachment to shaker drive. Available in two lengths, 2 metres and 3 metres, enabling adaptation to different
heights of tended and harvested plants. Fashioned in one piece to ensure lightweight structure and maximum rigidity.
2 m extension rod
6111 2080A
3 m extension rod
6111 2081A
Harness
Comfortable harness of ergonomic design, with generously proportioned shoulder pad. Ensures optimum distribution of weight and guarantees a
significantly low level of vibration felt by the operator.
Harness
CS61 310003
149
Shakers
Shakers with finger end
These lightweight and easy-to-handle tools, which are designed for private users and agricultural operators
involved in olive harvesting, deliver up to 4 times greater productivity than manual methods. Available with electric
motor or petrol engine.
Both models are supplied with 2 sets of telescopic extension rods of length 1.5-2.2 metres and 1.85-2.7 metres for
reaching branches up to 4.5 metres from the ground.
The fingers have interchangeable prongs for easy replacement.
The petrol engine model guarantees up to 1,300 cycles per minute for a yield of approximately 80 Kg per hour.
Petrol engine model with magnesium gear case and speed reducing gears lubricated with grease which turns fluid
after just a few minutes operation. Dual clutch (engine and gear case) for longer engine life.
Electric model with electronic control, guarantees maximum efficiency in all applications. The integrated economiser
system reduces the number of beats when the fingers are not in contact with the plant, thereby saving energy.
Available with 2 beating speeds (1150 and 1250 cycles per minute) which can be conveniently selected using a
button mounted on the handgrip.
Standard 18-metre cable supplied with the electric model.
Latest generation, brushless electric motor with rotating box: excellent performance coupled with low energy consumption.
Supply voltage 12 V using ground-based battery or using 2 types of portable lithium battery (Power 6 with a 6-hour
lifespan and Power 11 with an 11-hour lifespan). Battery charger included.
SO 2500 L
Displacement 25.4 cm³
Power
1.2 HP/0.9 kW
Tank capacity 0.6 L
Extension rod lengths 2m
Shaft arm diameter 26 mm
Drive shaft 8 mm
N° cycles per minute 1300 (at 8000 rpm engine speed)
Weight
2.7 Kg
SO 3000 E
150
Power
250 W
Voltage
12 V
1.5 m – 2.2 m / 1.85 m – 2.7 m
Shaft arm diameter
34 / 28 mm
Transmission shaft
10 mm
1150 - 1250
Weight
3.0 Kg
Shakers
Shakers with finger end
SO 2550
Displacement
25.4 cm3
Power
1.0 HP / 0.8 kW
Tank capacity
0.75 L
1.5 m – 2.2 m / 1.85 m – 2.7 m
Shaft arm diameter
34 / 28 mm
Transmission shaft
10 mm
1300 (at 8000 rpm engine speed)
Weight
7.8 Kg
Accessories for shakers with finger end
SO 2550
SO 3000 E
Machines
SO 2500 L
Part number
Telescopic extension rods
Telescopic extension rods of length 1.5-2.2 metres and 1.85-2.7 metres for reaching branches up to 4.5 metres from the ground.
Extension rod 1.5 – 2.2 metres
6823 2001
Extension rod 1.85 – 2.7 metres
6823 2005
Grease spray
PTFE + lithium soap-based grease spray. Ideal for lubricating the shaker mechanism. Pack of 24 x 100 ml bottles. Minimum order: 1 box.
Grease spray
0010 01569R
Harness
Helps to ensure optimum distribution of machine weight, giving the operator greater freedom of movement.
Harness
4160 463AR
151
Battery trolley
Convenient trolley for transporting the ground-based battery.
Battery trolley
6823 2002
Backpack + battery unit (Power 6)
Backpack + lithium battery with a 6-hour lifespan. Worn on the back, giving the operator maximum freedom of movement.
6823 2003
Backpack + lithium battery with an 11-hour lifespan. Worn on the back, giving the operator maximum freedom of movement.
152
6823 2004
SO 2550
Machines
SO 2500 L
Part number
SO 3000 E
Shakers
Accessories for shakers with finger end
The power of water and the force of pressure:
doubly effective for looking after
your favourite spaces.
High-pressure
washers
153
The power of water plus the force of pressure: this is the secret of Efco high-pressure washers. Vanguard
materials and manufacturing methods ensure Efco high-pressure washers will deliver hygiene, cleanliness and
optimum results. Ideal for household uses, with their impressive cleaning force and innovative styling, these Efco
appliances combine power and manageability to bring convenience and practical advantages around the outside
of the home, in the garden and in the garage.
Easily connected inlet and pressure
hoses: pump with quick couplers.
4-litre detergent
removable.
tank,
easily
Gun and lance: practical, ergonomic, and highly durable thanks to the use
of metal for internal components.
154
Practical system for attachment of
accessories.
15 metre hose reel. Convenient
handle and stop device.
Comfortable top handle at 820 mm high, plus additional bottom handle,
making the appliance easy to lift and carry.
Designed to offer convenience and practical advantages when cleaning around the outside of the home, in the
garden and in the garage.
Numerous features are included to ensure stress-free use, such as large wheels for ease of manoeuvring, and
generously proportioned recesses for stowage of accessories and power cable.
“Easy Start” system ensuring smooth power-up and start, whatever the type of connection to the a.c. mains supply.
Maximum economy in operation, thanks to the “Total Stop” interlock which shuts off the motor whenever the lance
jet is turned off.
High performance and efficiency sustained over time, by virtue of a brass pump (aluminium in IP 1210 S and IP
1360 S models) ensuring long-term durability and resistance to frost.
Motor thermal overload protection.
Generous standard equipment package, depending on the model, includes: gun, spray lance with adjustable angle
jet, high-pressure hose (6, 8 and 10 metres), hose reel and Rotojet spray lance.
Electric high-pressure washers (cold water) for home use
IP 1210 S
Max pressure
130 bar
Max flow rate
360 L/h
Rated power
1700 W
Voltage
230 V
Pump
metal
Detergent
foaming lance
High-pressure hose
plastic (6 m – ¼”)
Hose reel
yes
Rotojet nozzle
no
IP 1360 S
Max pressure
140 bar
Max flow rate
410 L/h
Rated power
2000 W
Voltage
230 V
Pump
metal
Detergent
foaming lance
High-pressure hose
Hose reel
yes
Rotojet nozzle
yes
155
Electric high-pressure washers (cold water) for home use
IP 1450 S
Max pressure
150 bar
Max flow rate
480 L/h
Rated power
2300 W
Voltage
230 V
Pump
brass
Detergent
foaming lance
High-pressure hose
Hose reel
yes
Rotojet nozzle
yes
IP 1550
Max pressure
150 bar
Max flow rate
480 L/h
Rated power
2300 W
Voltage
230 V
Pump
brass
Detergent
foaming lance
High-pressure hose
rubber (8 m – ¼”)
Hose reel
no
Rotojet nozzle
yes
IP 1700 S
156
Max pressure
155 bar
Max flow rate
540 L/h
Rated power
2700 W
Voltage
230 V
Pump
brass
Detergent
detergent tank
High-pressure hose
rubber (10 m – ¼”)
Hose reel
yes
Rotojet nozzle
yes
Structural strength and dependability assured in any working conditions, thanks to internal parts made of stainless
steel and brass, and a tough three-piston axial pump with control valve and pressure gauge.
Brass head will never degrade over time.
“Easy Start” system ensuring smooth power-up and start, whatever the type of connection to the a.c. mains supply.
Maximum economy in operation, thanks to the “Total Stop” interlock which shuts off the motor whenever the lance
jet is turned off.
Standard equipment: 8 m high-pressure hose (15 m with IP 2100 S model), rubber with steel braid reinforcement,
single bore lance with fixed and adjustable fan spray nozzle.
Electric high-pressure washers (cold water) for professional use
IP 1900
Max pressure
140 bar
Max flow rate
540 L/h
Rated power
2600 W
Voltage
230 V
Pump
brass
Detergent
detergent tank
High-pressure hose
rubber (8 m – ¼”)
Hose reel
no
Rotojet nozzle
no
IP 2100 S
Max pressure
150 bar
Max flow rate
600 L/h
Rated power
2900 W
Voltage
230 V
Pump
brass
Detergent
detergent tank
High-pressure hose
rubber (15 m – ¼”)
Hose reel
yes
Rotojet nozzle
no
157
Electric high-pressure washer (hot water) for professional use
Designed to stringent quality standards, this model will prove indispensable for cleaning extensive outdoor service
areas (yards, porticoes), industrial premises with machinery or large expanses of floor to be hosed down, and in
fact any situations where the cleansing power of hot water is required.
Three-piston axial pump flange mounted directly to the electric motor, with brass head: maximum quality and
consistency guaranteed over time.
Easy Start system ensuring smooth power-up and start, whatever the type of connection to the mains supply.
Water heated rapidly by a vertical boiler with double spiral coil.
Control panel incorporating overload protection for electric pump motor, on-off switch and temperature control knob:
all permanently and conveniently within easy reach.
Handy storage slot for gun and lance.
Standard equipment including gun, fixed jet spray lance and 10-metre high-pressure hose (rubber).
Many accessories available (scale inhibitor, drain auger, sandblasting lance, Rotojet spray lance) for maximum
versatility of use.
IP 3000 HS
158
Max pressure
150 bar
Max flow rate
540 L/h
Rated power
2700 W
Voltage
230 V
Max water outlet temperature
90 °C
Pump
axial 3-piston with brass head
Detergent
detergent tank
High-pressure hose
rubber (10 m – ¼”)
Hose reel
yes
Rotojet nozzle
no
Machines
IP 1200 S - IP 1210 S
IP 1350 S - IP 1360 S
IP 1450 S
IP 1500 S
IP 1550
IP 1600
IP 1700 S
IP 1900
IP 2000
IP 2100 S
IP 3000 HS
Part number
Accessories for high-pressure washers
Floor wash lance
This tool is specially designed for washing floors and surfaces on which projected spray must be avoided.
6850 0014
Floor wash lance
6850 0004
Rotojet lance
Increases efficiency thanks to a pressure-generated turbine effect. All models can use a rotating nozzle featuring high washing power.
6850 0007
Rotojet lance
6850 0008
6850 0013
Brushes
Driven by the pressure of the water jet. Made of natural bristles, the brushes are designed for cleaning delicate surfaces.
Rotary brush
6850 0010
Fixed brush
6850 0003
Rotary brush
6850 0002
159
Part number
Machines
IP 1200 S - IP 1210 S
IP 1350 S - IP 1360 S
IP 1450 S
IP 1500 S
IP 1550
IP 1600
IP 1700 S
IP 1900
IP 2000
IP 2100 S
IP 3000 HS
Accessories for high-pressure washers
8 m extension hose
8 m high pressure hose.
6850 0006
8 m extension hose
6850 0012
Drain clearing attachment
Unblocks drains and pipelines rapidly.
6850 0005
Drain clearing attachment
6850 0011
Nozzle for drain clearing attachment
Compatible with specific models based on flow rate in litres.
CH34 000426
Nozzle for drain clearing attachment
CH34 000536
Sandblast lance
Highly practical and easy to use, the sandblast lance removes rust, old paint films, and accumulated deposits.
6850 0001
Sandblast lance
6850 0009
Water filter kit
Water filter for protecting the pump and nozzles from impurities in the water.
Water filter kit
160
6850 0016
Tough and tireless in the fields;
light and nimble in plots and gardens.
A full range of versatile machines.
Rotary tillers
161
Rotary tillers
162
Rotary tillers
Rugged and reliable, easy to handle and intuitive to use, Efco rotary tillers are designed to facilitate soil preparation
and cultivation over large areas. Designed for safety and manufactured with durable materials, Efco tillers offer
significant benefits for professional users (gardeners, growers, landscaping contractors), also suitable for all
domestic gardening enthusiasts.
The chain guard is reinforced
to withstand flying stones and
accidental impact. Tough chain
transmission
carries
3-year
warranty.
The front wheel is included for
transport purposes, and can be
raised when the machine engages
the soil.
Handlebars are adjustable and
can also be offset, allowing the
user to move around freely even in
confined spaces, without treading
on the tilled soil.
External
gear
selector,
ergonomically designed and easily
accessible.
The handlebars are fully adjustable:
up and down, to adapt to the user’s
height and build, and sideways
(offset), allowing the operator
to walk alongside crops without
treading on the freshly turned soil.
Towing hitch for trailer.
Front counterweight (optional) for
better balancing of the machine
(MZ 2500 R - MZ 2600 R).
In the MZ 2050 model the rotor
quick coupling system with elastic
plug
simplifies
maintenance
operations.
Ideal for private users with small plots and gardens requiring periodic maintenance. Also designed for a variety of jobs
such as preparing soil for grass seeding, digging furrows for planting flowers, shrubs and vegetables, and other operations
such as soil scarification and edge tidying. Its versatility means that it can also be used in combination with roller brushes
for cleaning patios.
Rotary tillers
Compact rotary tiller for home use
Supplied as standard with a set of 4 blades giving an operating width of 30 cm. The cutters are independent to enable
operation with only 2 blades, thereby limiting the operating width to 15 cm and permitting work between narrowly
spaced rows of plants (such as potato plants, vegetable plants etc.).
Available as accessories: set of 4 cutters designed for tilling soft or previously turned soil, one roller brush, one
scarifier and one plough.
Robust aluminium housing with spur gears and worm gear.
180° reversible handlebars which enable the operator to push the machine and use it with accessories such as the
brush to tidy pavements or pedestrian walkways. Foldable for easy storage and transport (e.g. in the boot of a car).
Integrated on/off control situated on the handgrip along with the accelerator lever for maximum accessibility and
convenience.
Simple blades which are easy to attach (without tools) and fit onto the shaft for straightforward adjustment of the
operating width.
MZ 2030
Engine make/model
Honda GX 25
Displacement
25 cm3
Gearbox
1 forward speed
Rotor
2+2 blades - 30 cm
Handlebars
reversible
Transmission
in aluminium
Dimensions
125x100x30 cm
Weight
14 Kg
Accessories for compact rotary tiller for home use
Part number
Machines
MZ 2030
Set of 4 cutters
Set of 4 additional cutters for tilling soft or previously turned soil.
Set of 4 cutters
6860 2001
Roller brush
Brush with rollers for keeping porches, patios and steps free from dust, green waste and small debris.
Roller brush
6860 2002
Scarifier
Scarifier for freeing turf of moss and thatch, thereby allowing the lawn to breath.
Scarifier
6860 2003
Plough
Tool for deeper furrowing and preparation of the ground prior to tillage.
Plough
6860 2004
163
Rotary tillers
Rotary tillers for home use
Ideal for home gardeners who need to soften up soil for seeding, this model offers an excellent combination of
manageability, light weight and user-friendliness. Available with 4-stroke petrol engines in different sizes, all with
overhead valves (OHV).
Robust steel structure and reinforced chain guard to protect the transmission from stones and accidental knocks.
The belt drive with oil-immersed chain ensures maximum reliability.
Riveted steel blades: ensure effective tilling and long service life.
Multi-function lever with throttle and switch-off control integrated in a single lever, making the machine even easier
to use.
Ergonomic handles which enhance operator comfort during use.
The rotor quick coupling system with elastic plug simplifies maintenance operations.
MZ 2050 R
Engine make/model
B&S 550 series OHV
Displacement
127 cm³
Gearbox
1 forward speed + 1 reverse
Rotor
2+2 blades - 60 cm
Handlebars
height adjustable
Reinforced transmission
3-year warranty
Dimensions
120x105x80 cm
Weight
47 Kg
MZ 2050 RX
164
Engine make/model
Honda GX 120 OHV
Displacement
118 cm³
Gearbox
Rotor
2+2 blades - 60 cm
Handlebars
height adjustable
3-year warranty
Dimensions
120x105x80 cm
Weight
47 Kg
MZ 2050 RK
Engine make/model
Emak K 700 H OHV
Displacement
183 cm³
Gearbox
Rotor
2+2 blades - 60 cm
Handlebars
height adjustable
3-year warranty
Dimensions
145x100x50-80 cm
Weight
52 Kg
Rotary tillers
Rotary tillers for home use
MZ 2060
Engine make/model
B&S 800 series OHV
Displacement
205 cm³
Gearbox
1 forward speed
Rotor
2+2 blades - 60 cm
with protection discs
Handlebars
height adjustable
3-year warranty
Dimensions
145x100x50-80 cm
Weight
45 Kg
165
Rotary tillers
Rotary tillers for intensive use
Designed for vegetable and flower gardens, or smallholdings, these models feature an excellent combination of
easy handling, strength, durability and superior performance. Compact and lightweight, they allow problem-free
tillage even in confined spaces or around low vegetation.
Maximum reliability, thanks to chain transmission guaranteed 3 years.
Reinforced chain guard withstands flying stones and accidental impact.
Ergonomically designed levers and selectors all within easy reach, ensuring constant control of the machine when in
motion.
Fully adjustable handlebars for more comfortable operation on any type of soil.
With handlebars in the offset position, the operator can walk to one side without treading on the tillage area.
The front wheel, used for transport purposes, can be raised when the machine is in operation and engaging the soil.
R models have a reverse gear to facilitate manoeuvres and help reposition the machine correctly during tillage operations.
MZ 2080
Engine make/model
B&S 800 series OHV
Displacement
205 cm³
Gearbox
1 forward speed
Rotor
3+3 blades - 80 cm
Handlebars
height adjustable
3-year warranty
Dimensions
145x100x50-80 cm
Weight
45 Kg
MZ 2080 RK
166
Engine make/model
Emak K 800 H OHV
Displacement
183 cm³
Gearbox
Rotor
2+2 blades - 80 cm
Handlebars
fully adjustable
3-year warranty
Dimensions
120x105x80 cm
Weight
50 Kg
MZ 2080 R
Engine make/model
B&S 800 series OHV
Displacement
205 cm³
Gearbox
Rotor
3+3 blades - 80 cm
Handlebars
fully adjustable
3-year warranty
Dimensions
145x100x50-80 cm
Weight
50 Kg
Rotary tillers
Rotary tillers for intensive use
MZ 2090
Engine make/model
Honda GX 160 OHV
Displacement
163 cm3
Gearbox
1 forward speed
Rotor
3+3 blades - 80 cm
Handlebars
fully adjustable
3-year warranty
Dimensions
145x100x50-80 cm
Weight
45 Kg
MZ 2090 R
Engine make/model
Honda GC 160
Displacement
160 cm3
Gearbox
Rotor
3+3 blades - 80 cm
Handlebars
fully adjustable
3-year warranty
Dimensions
145x100x50-80 cm
Weight
50 Kg
167
Rotary tillers
Rotary tillers for professional use
The top professional models of the range are ideal for cultivation duties and general landscape maintenance.
Designed to give exceptional performance, even on hard and uneven soils, these are the ideal machines for
gardeners and growers alike.
Oil-immersed gear transmission guarantees maximum reliability.
Reinforced chain guard withstands flying stones and accidental impacts.
Available with several forward speed options for greater versatility of use: first gear can be selected for primary tillage
and weed clearance; other gears are suitable for operations requiring greater precision, typically seedbed preparation.
Reverse gear maximizes manoeuvrability and facilitates repositioning of the machines on the right line.
External gear selector: ergonomic design, ease of access.
Equipped with fully adjustable handlebars for maximum versatility of use, even operating close to plants and crops.
MZ 2100 R
Engine make/model
Honda GX 160 OHV
Displacement
163 cm3
Gearbox
Rotor
3+3 blades - 90 cm
Handlebars
fully adjustable
Dimensions
145x90x95 cm
Weight
65 Kg
MZ 2500 R
168
Engine make/model
Honda GX 160 OHV
Displacement
163 cm3
Gearbox
Rotor
3+3 blades - 100 cm
Handlebars
fully adjustable
Dimensions
160x100x95 cm
Weight
90 Kg
Rotary tillers
Rotary tillers for professional use
MZ 2600 R
Engine make/model
Honda GX 200 OHV
Displacement
196 cm3
Gearbox
Rotor
3+3 blades - 100 cm
Handlebars
fully adjustable
Dimensions
160x100x95 cm
Weight
90 Kg
Accessories for rotary tillers
Machines
MZ 2050 R
MZ 2050 RX
MZ 2050 RK
MZ 2060
MZ 2080
MZ 2080 RK
MZ 2080 R
MZ 2090
MZ 2090 R
MZ 2000
MZ 2100 R
MZ 2500 R
MZ 2600 R
Part number
Cultivator head extension kit from 60 to 80 cm
6867 2001
Cultivator head extension kit from
60 to 80 cm
6860 0007
Lateral transport wheels
Lateral wheels to facilitate transportation of the machines over hard terrain.
Pair of lateral transport wheels
6860 0001R
169
Part number
Machines
MZ 2050 R
MZ 2050 RX
MZ 2050 RK
MZ 2060
MZ 2080
MZ 2080 RK
MZ 2080 R
MZ 2090
MZ 2090 R
MZ 2000
MZ 2100 R
MZ 2500 R
MZ 2600 R
Rotary tillers
Accessories for rotary tillers
Adjustable furrowing tool with attachments
Adjustable furrowing tool for deep furrowing of hard and uncultivated terrain and to prepare the ground for tillage.
6860 0006
Adjustable furrowing tool
with attachments
6860 0005
Pair of grass cutter rollers
Pair of grass cutter rollers for efficient weed-clearing action.
Pair of grass cutter rollers
6860 0004
Pair of tyred wheels - Flange kit for tyred wheels 4.00-8DF
Pair of tyred wheels plus flange kit for the use of a trailer.
170
Pair of tyred wheels
6860 0002
Flange kit for tyred wheels
4.00-8DF
L009 3800
To sink holes with efficiency and power,
there can be no compromise
on manoeuvrability and precision.
Earth augers
171
Earth augers
172
Earth augers
Ideal for sinking holes to receive vines and plants in general, greenhouse poles or fence uprights. Machines
characterized by superior mechanical strength under the most hostile of conditions and in all operating positions.
Available in versions for one-man operation, and for two-man operation where dictated by job difficulty and soil
hardness. Numerous tool options include bits with 1 and 2 flights for maximum flexibility of application.
One-man operated models have an
ergonomically designed handle for
optimum comfort, and are equipped
with a lever preventing accidental
acceleration.
The two-man operated model
incorporates an automatic safety
switch that will shut off the engine
if the handles are released.
Quick-fit pinned spigot-socket
coupler for swift attachment and
replacement of bits.
Diaphragm carburettor allows the
machine to operate in any position
without leakage of fuel.
A handy lever can be used to shift
from forward drive through idle to
reverse in swift succession, and
allow removal of the bit from the
soil with minimal effort.
Available accessories include a
tough bit for drilling through ice.
Generous range of bits, adapters
and extensions for maximum
versatility of use.
Designed to drill small holes in every sector (vines and plants, street lighting, fence posts), model TR 1551 mounts an Emak
2-stroke engine with chrome cylinder and forged-steel drive shaft and connecting rod.
The engine controls are grouped together on just one hand making them the ideal solution for single-man operations.
On the other hand, the professional model TR 1585 R requires the presence of two operators and is designed to handle
larger holes on more obstinate ground. Safe and user-friendly, it features a direction changer to facilitate bit removal.
It is also fitted with foldable handles for easy transport and an automatic cutout that stops the engine should the operators
lose control of the machine.
Earth augers
Earth augers
TR 1551
Power
2.1 HP – 1.6 kW
Displacement
50.2 cm3
Reduction ratio
40 : 1
Weight without bit
9.1 Kg
Bit diameter
8-10-15-20 cm
TR 1585 R
Power
5.7 HP - 4.2 kW
Displacement
80.7 cm3
Reduction ratio
85 : 1
Weight without bit
30.6 Kg
Bit diameter
from 8 to 50 cm
173
Drill bits
TR 1585 R
TR 1581 R
Machines
TR 1551
Part number
TR 1540
Earth augers
Accessories for earth augers
Available in single or double flute versions (double flutes ensure more efficient penetration and facilitate the discharge of earth). Equipped with tip and
flute made of special steel to ensure top performance and excellent resistance to wear.
Single flute bit ø 8x100 cm
3751 00028A
3751 00029A
3751 00030A
3751 00031A
0280 00073A
0280 00074A
0280 00075A
Double flute bit ø 25x100 cm
0282 00297
0282 00298
0282 00299
0282 00306
0282 00252
0282 00253
Adapter for single flute bits
0282 00335A
Extensions
To obtain greater drilling depth.
60 cm extension for single flute bit
ø 25-30-35 cm
0282 00287
38 cm extension for double flute bits
0282 00289
30 cm extension with cotter pin
3751 00115
Connection adapter + plugs
0282 00354
Ice auger bit
3751 00110
Ice auger bit
For drilling through ice.
174
Heavy and bulky loads, awkward terrain:
here are some sturdy helpers,
ready to overcome any obstacle.
Transporters
175
Transporters
176
Transporters
Characterized by extremely tough components and built to high standards of quality, these machines are ideal for
construction and agricultural duties involving the transportation of bulky and heavy loads on steep gradients or
over rough terrain.
Equipped with power take-off
for attachment of accessories.
Telescoping flat body optimises
transport operations, even with
bulky loads.
H and HD models with hydraulic
dumper body.
Dump angle 50° (60° on HD model).
Wide crawler tracks ensure
solid grip on any type of terrain
(contributing to operator safety).
Tight turning radius for ease of
manoeuvre on building sites or in
greenhouses and vineyards.
Collapsible sides ensure maximum
convenience for loading operations.
Rear engine guard maximizes
operator safety.
Compact and manageable, these machines are a great help out in fields, orchards and woodland for carrying harvested
fruit or firewood. Ideal for transporting materials where space is restricted, or on gradients.
Transporters
Transporters for home use
Tight turning radius (700 mm) for ease of access, even where room for manoeuvre is limited, without damaging vegetation
close by.
Available with 2 forward and 2 reverse speeds.
Telescoping flat body optimizes transport operations, even with bulky loads.
Dump angle 50°. Dumper body operated manually using a handy lever.
TN 2700
Displacement
190 cm3
Engine make/model
Load capacity
270 Kg
Gearbox
2+2
Speed
1st: 1.60 - 2nd: 3.60 - 1stRev: 1.40
2ndRev: 3.40
Lift/dump
manual
Minimum turning radius
700 mm
Dump angle
45°
Flat body
telescoping
Body length
93 – 106 cm
Body width
52 - 90 cm
Overall dimensions
153x60x90 cm
Weight
140 Kg
TN 3400
Displacement
160 cm3
Engine make/model
Load capacity
350 Kg
Gearbox
2+2
Speed
1st: 1.60 - 2nd: 3.60 - 1stRev: 1.40
2ndRev: 3.40
Lift/dump
manual
700 mm
Dump angle
45°
Flat body
telescoping
Body length
93 – 106 cm
Body width
56 – 94 cm
Overall dimensions
153x64x90 cm
Weight
155 Kg
177
Transporters
Professional transporters
Designed to stringent quality standards, these transporters offer top performance in terms of carrying capacity,
matchless long-term reliability, and, with wide crawler tracks assuring solid grip on any type of terrain, a high level of
operator safety even on steep gradients (recommended limit 40° with no load).
H and HD models are equipped with a hydraulically operated dumper body (lever-operated manual dump on other models).
Tight turning radius for ease of manoeuvre on building sites or in greenhouses and vineyards.
Equipped with telescoping and fully collapsible sides (on 450 Kg model, telescopic only), offering maximum convenience for
loading operations and optimizing transportation even of the bulkiest loads.
New reinforced braking system, shielded to ensure all components are protected even during the most demanding
applications, or in dust-laden and muddy conditions.
Wide crawler tracks ensure solid grip on any type of terrain, even on sloping ground.
TN 4500
Displacement
118 cm3
Engine make/model
Honda GX 120
Load capacity
450 Kg
Gearbox
3 + 1R
Speed
1st: 1.88 - 2nd: 4.13 - 3rd: 7.00
Rev: 1.86
Lift/dump
manual
700 mm
Dump angle
50°
Flat body
telescoping
Body length
93 – 106 cm
Body width
56 – 94 cm
Overall dimensions
164x65x102 cm
Weight
180 Kg
TN 5600
178
Displacement
163 cm3
Engine make/model
Honda GX 160
Load capacity
550 Kg
Gearbox
4 + 2R
Speed
1st: 1.88 - 2nd: 3.16 - 3rd: 4.13 - 4th:
7.00 - 1stRev: 1.86 - 2ndRev: 3.13
Lift/dump
manual
700 mm
Dump angle
50°
Flat body
telescoping/
collapsible sides
Body length
100 – 118 cm
Body width
65 – 110 cm
Overall dimensions
172x73x102 cm
Weight
200 Kg
Transporters
Professional transporters
TN 5600 H
Displacement
163 cm3
Engine make/model
Honda GX 160
Load capacity
550 Kg
Gearbox
4 + 2R
Speed
1st: 1.88 - 2nd: 3.16 - 3rd: 4.13
4th: 7.00 - 1stRev: 1.86
2ndRev: 3.13
Lift/dump
hydraulic
700 mm
Dump angle
50°
Flat body
telescoping/
collapsible sides
Body length
100 – 118 cm
Body width
65 – 110 cm
Overall dimensions
172x73x102 cm
Weight
215 Kg
TN 5600 HD
Displacement
163 cm3
Engine make/model
Honda GX 160
Load capacity
550 Kg
Gearbox
4 + 2R
Speed
1st: 1.88 - 2nd: 3.16 - 3rd: 4.13 - 4th:
7.00 - 1stRev: 1.86 - 2ndRev: 3.13
Lift/dump
hydraulic
700 mm
Dump angle
50°
Flat body
dumper
Body length
91 cm
Body width
62 cm
Overall dimensions
172x73x102 cm
Weight
215 Kg
179
Transporters
180
Transporters
Transporters dimensions (in mm)
TN 2700
TN 3400
TN 4500
TN 5600
TN 5600 H
TN 5600 HD
L1
1.530-1.665
1.530-1.665
1.640
1.715
1.575
L2
925-1.060
925-1.060
925-1.060
1.000-1.180
915
H1
965
965
1.020
1.020
1.020
H2
885
885
900
900
900
H3
570
570
590
590
515-725
H4
240
240
240
240
405
H5
330
330
339
339
320
H6
65
65
70
70
70
W1
590
590
620
620
622
W2
603-983
643-1.023
643
733
622
W3
170
170
-
-
-
W4
520-900
560-940
560-940
650-1.100
572
P1
690
690
785
785
785
P2
415-550
415-550
330
405
265
Transporters
Accessories for transporters
TN 5600 HD
TN 5600 H
TN 5600
TN 5500 H
TN 5500
TN 4500
TN 3500
TN 3400
Machines
TN 2700
Part number
High sides kit
Conversion kit used to increase the height of the sides, facilitating the transportation of bulkier loads.
6872 2010
6872 2003
High sides kit
6870 0001
6870 0002
Tank
An optional accessory designed for models with telescoping loading platform, useful for transporting liquids.
200 L tank + hose reel + 20 m
hose and handheld lance
L009 5200
Side bars for tank
Indispensable when moving on slopes to stop the tank from tipping over.
Side bars kit for tank
L009 5400
Pump 30 l/min - 30 atmospheres
L009 3600
Pump
For spraying.
181
TN 5600 HD
TN 5600 H
TN 5600
TN 5500 H
TN 5500
TN 4500
TN 3500
Machines
TN 3400
Part number
TN 2700
Transporters
Accessories for transporters
Kit for attaching accessories to the transporter power take-off
Indispensable for attaching accessories.
Kit for attaching accessories to the transporter
power take-off
L011 8900
Front loader
Front-mounted accessory for loading the body.
6920 0027
65 cm front loader
with hydraulic lift (only for models
with hydraulic dump)
6920 0026
Front shovel
Front-mounted shovel used mainly in building, to manage piles of gravel, sand or earth.
85 cm front shovel (only for models
with manual dump)
L010 1200
6920 0037
85 cm front shovel with hydraulic lift (only for
models with hydraulic dump)
6920 0036
Ballast
An optional accessory designed to enhance stability and balance in demanding conditions (unladen machine on steeply sloping and uneven terrain).
Complete kit
(ballast and fitment system)
182
6920 9059
Strong, powerful and durable in the extreme.
When the going gets tough, no room
for half-measures.
Powercutters
183
Powercutters
184
Powercutters
Powerful professional class tools for cutting asphalt, concrete and metals. Designed specifically for professional users,
these machines are equipped with every available leading-edge solution able to guarantee high performance, long-term
reliability and maximum operator comfort. Suitably proportioned filter systems designed especially to protect the engine
even in the most hostile and dust-laden environments. Ergonomic designed - all main controls readily accessible.
Cylinder with decompressor giving
smoother start with reduced
mechanical stress.
The carburettor has a compensator
designed to maintain a steady
air/fuel ratio, ensuring constant
efficiency of the machine and
longer maintenance intervals.
Available as standard: water cooling
kit to keep the disc constantly wet
and help eliminate airborne dust
generated in the course of cutting
operations.
Innovative multilayer filtering
system (foam + paper + nylon): the
carburettor receives only clean air,
purged entirely of dust.
Aluminium cutter arm and disc
guard make the machine lighter
and more manageable. Cutter arm
reversible through 180°, allowing
operation close to walls.
Ergonomic
handle
assembly
isolated from the engine by six
rubber
antivibration
mounts,
rendering the machine more stable
and manageable.
Palm-operated safety switch to
prevent accidental throttling, all
controls located immediately to
hand.
The right choice for the most demanding cutting requirements in construction and road building applications; fitted with
powerful engines and state-of-the-art filtering devices in order to ensure trouble-free running even in dusty environments.
Powercutters
Powercutters
Reversible cutting arm for improved access.
Filtering system comprises 3-layer sponge prefilter, plus paper and nylon-mesh filters for unrivalled performance under all
conditions.
Electronic speed governor on coil.
Cylinder with decompressor guarantees less stressful starting.
Silicone-coated starting cord prevents swelling caused by water, fuel tank protected against sparks and accidental knocks.
Machine supplied without disc.
TT 183 12”
Power
5 HP - 3.7 kW
Displacement
80.7 cm3
Cutting disc diameter
300 mm
Max. cutting depth
120 mm
Weight without cutting disc
11.2 Kg
TT 183 14”
Power
5 HP - 3.7 kW
Displacement
80.7 cm3
350 mm
Max. cutting depth
125 mm
11.4 Kg
TT 183 16”
Power
5 HP - 3.7 kW
Displacement
80.7 cm3
400 mm
Max. cutting depth
150 mm
13.6 Kg
N.B.: photographs are purely indicative. The machine is supplied without disc.
185
Powercutters
Powercutters
TT 163 12”
Power
4.1 HP - 3.0 kW
Displacement
63.3 cm3
300 mm
Max. cutting depth
100 mm
10.2 Kg
TT 163 14”
Power
4.1 HP - 3.0 kW
Displacement
63.3 cm3
350 mm
Max. cutting depth
120 mm
10.4 Kg
N.B.: photographs are purely indicative. The machine is supplied without disc.
Accessories for powercutters
TT 183
TT 180
TT 163
Machines
TT 162
Part number
Trolley
The trolley for powercutters is designed to enable long high-precision cutting on all types of surfaces. This accessory is supplied complete with a 16
l water tank and it can be applied to our machines without the use of tools. Also machines with roller support can be fitted on the trolley by means
of the supplied adapter kit.
Trolley kit
5203 9002B
Water cooling kit
The water cooling kit makes it possible to keep the cutting disk constantly wetted, thereby eliminating airborne dust and cooling the cutting equipment.
Water cooling kit
“Pro” water cooling kit
186
5201 2055
5201 0110A
Working calmly and efficiently:
the peace of mind that comes from safety.
Protective clothing
187
Protective clothing
Protective clothing
TO EC STANDARDS
Standard protective jacket
EC approval, standard EN 340 - PPE category 1. Lightweight and impact resistant made with high quality breathable material
composed of 33% cotton and 67% polyester. Opening in the back for fully effective ventilation, two front pockets, elasticated
cuffs, double pull zip. Pack: carton.
Description
Part number
Standard jacket size“M” – 42/44
001000857A
Standard jacket size “L” – 46/48
001000858A
Standard jacket size “XL” – 50/52
001000859A
Standard jacket size “XXL” – 54/56
001000860A
TO EC STANDARDS
Chain-resistant protective jacket
EC approval, standards EN 340 and EN 381-10/11: PPE category 2 - class 1. Resistant to chain speeds of up to of 20 m/sec.
Made from breathable material composed of 33% cotton and 67% polyester. Complete cutting protection for arms, shoulders,
and chest. Two front pockets, elasticated cuffs, double pull zip. Pack: carton.
Description
188
Part number
Chain-resistant jacket size “M” – 42/44
001000853A
Chain-resistant jacket size “L” – 46/48
001000854A
Chain-resistant jacket size “XL” – 50/52
001000855A
Chain-resistant jacket size “XXL” – 54/56
001000856A
TO EC STANDARDS
Chain-resistant trousers
EC approval, standards EN 340 and EN 381-5: 1995 type A, PPE category 3 - class 1. Resistant to chain speeds of up to 20
m/sec. Made from breathable material composed of 33% cotton and 67% polyester. Chain protection 180° + 5 cm at sides.
Elasticated waistband, zip, side pockets designed to keep out sawdust, shoulder strap fitting, two front pockets, one rear and
one side. Pack: carton.
Description
Protective clothing
Protective clothing
Part number
Chain-resistant trousers size “S” - 38/40
001001367
Chain-resistant trousers size “M” – 42/44
001001143A
Chain-resistant trousers size “L” – 46/48
001001144A
Chain-resistant trousers size “XL” – 50/52
001001145A
Chain-resistant trousers size “XXL” – 54/56
001001146A
TO EC STANDARDS
Professional chain-resistant trousers
EC approval to standards EN 340 and EN 381-5:1995 type A, PPE category 2, class 1. Resistant to chain speeds of up to of
20 m/sec. Made from breathable material consisting of 33% cotton and 67% polyester. Fabric reinforced with 100% polyamide.
Special 8-layer chain-resistant protection 180° + 5 cm sides. Elasticated waistband and leg piping. Rear side in bi-stretch fabric
for enhanced comfort. Front pockets with zipper opening. Shoulder strap fitting and two rings for tape measure. The lower part
is coloured orange to ensure maximum visibility. 30 mm reflective stripe for night-time safety. Single-size system for a more
comfortable fit. Pack: carton. Different sizes available on request.
Description
Part number
Professional chain-resistant trousers size 42
001001557
001001558
001001559
001001560
001001561
001001562
Chain-resistant dungarees
TO EC STANDARDS
EC approval, standards EN 340 and EN 381-5: 1995 type A, PPE category 2 - class 1. Resistant to chain speeds of up to 20 m/
sec. Made from breathable material composed of 33% cotton and 67% polyester. Chain protection 180° + 5 cm at sides. Side
opening secured with buttons. 1 bib pocket, 2 front and 1 side. Elasticated waistband with loops for belt and shoulder straps.
Modified bib has extra wraparound width, providing additional comfort and limiting penetration of sawdust. Pack: carton.
Description
Part number
Chain-resistant dungarees size “S” - 38/40
001001369
Chain-resistant dungarees size “M” – 42/44
001000861A
Chain-resistant dungarees size “L” – 46/48
001000862A
Chain-resistant dungarees size “XL” – 50/52
001000863A
Chain-resistant dungarees size “XXL” – 54/56
001000864A
189
Protective clothing
Protective clothing
TO EC STANDARDS
Chain-resistant leggings
EC approval, standards EN 340 and EN 381-5: 1995 type A, PPE category 3 - class 1. Resistant to chain speeds of up to 20
m/sec. Made from breathable material composed of 33% cotton and 67% polyester. Chain protection 180° + 5 cm at sides.
Elasticated waistband, full length zippered opening on both legs, double belt loops and shoulder strap fitting, one pocket. Easy
to put on. Pack: carton.
Description
One-size leggings
Part number
001001360
TO EC STANDARDS
Safety dungarees for brushcutters
EC approval, standard EN 340 - PPE category 1 – class 1. Made from breathable material composed of 33% cotton and 67%
polyester, with tough protective facing on the front of the legs. Shoulder straps, elasticated waistband, side opening secured with
buttons, one bib pocket, two front pockets and ruler pocket on one side. Pack: carton
Description
190
Part number
size “M” - 42/44
001000927A
size “L” - 46/48
001000928A
size “XL” - 50/52
001000929A
size “XXL” - 54/56
001000930A
TO EC STANDARDS
Protective helmet with ear defenders and visor
EC approval, standard EN 397 and KWF certification. Personal protective equipment category 3. Made of UV-stable ABS.
Complete with adjustable ear defenders (EC approval, standard EN 352-3) and mesh face screen (EC approval, standard EN
1731-S). Adjustable internal fabric edging with 4-point fitting and absorbent material with sweat shield and protective neck flap.
Lightweight and strong. With special “Life-light” indicator which is able to determine when the helmet is no longer safe, following
exposure to UV rays. Pack: carton
Description
Protective clothing
Protective clothing
Part number
Helmet with ear defenders, visor and nape cover
001001284A
Mesh visor (replacement)
001001287R
Protective neck cover
001001540R
Hygiene kit
001001531R
Visor support kit
001001542R
Chin strap
001001543R
Hard hat/ear muff connection kit
001001532R
Visor support
001001541R
p.n. 001001287R
p.n. 001001540R
p.n. 001001543R
p.n. 001001532R
p.n. 001001531R
p.n. 001001542R
p.n. 001001541R
TO EC STANDARDS
Safety helmet
EC approval, standard EN 397 and KWF certification. Personal protective equipment category 3. Made of UV-stable ABS.
Adjustable internal fabric edging with 4-point fitting and absorbent material. Lightweight and strong with leather sweat shield,
equippable with ear defenders, visor and neck flap. With special “Life-light” indicator which is able to determine when the helmet
is no longer safe, following exposure to UV rays. Pack: carton.
Description
Part number
001001286
Helmet
TO EC STANDARDS
Protective lenses
“Clear” or “yellow” polycarbonate lenses. EC approval, standard EN 166: 1001. Optical class 1, PPE category 2. Free of optical
distortion (EN 166-170), impact resistant, 100% UV filtration (EN 172), anti-fog, anti-scratch, anti-static and anti-glare in sunlight.
Lenses are retractable and fitted to hard hats (protective helmet p/n 001101284A and safety helmet p/n 001001286). Pack:
carton.
Description
Part number
Protective lenses for safety helmet, clear
001001348R
Protective lenses for safety helmet, yellow
001001349R
191
Protective clothing
Protective clothing
TO EC STANDARDS
Chain-resistant arm guards
EC approval, standard EN 340 – PPE category 1. Made from breathable material composed of 33% cotton and 67% polyester.
Chain protection 360°. Elastic at elbow and elasticated cuffs. Pack: carton.
Description
One-size arm guard.
Part number
001001365
TO EC STANDARDS
Ear defenders
Description
Part number
Professional ear and hearing defenders with FM
stereo radio
001001355
Approved in conformity with PPE Directive 89/686
EEC and the applicable sections of European
standard EN 352-1: 1993/pr EN 352-3. The music
volume at the earphone has been measured in tests
and corresponds to a maximum sound pressure
level of 80 dB(A). Designed for people who work or
do their hobby outdoors – in woods, gardens, parks,
etc - to protect your hearing and listen to the radio
at the same time.
Description
Professional ear and hearing defenders
Part number
001001347
EC approval, standard EN 352-1. PPE category 2.
Developed for high noise environments, and will
attenuate very low frequencies at high volume. SNR
attenuation: 31 dB (up to 111 dBA). Pack: carton.
Description
Ear defenders
Part number
001000835
EC approval, standard EN 352-1/93. PPE category 2.
For greater comfort and safety during work.
Compatible, adjustable and lightweight. Attention
(SNR): 30 dB. Pack: pouch.
Description
Ear defenders
EC approval, standard EN 352-1/93. For greater
comfort and safety during work. Adjustable.
Attenuation (SNR): 27 dB. Pack: pouch.
192
Part number
4175114
Protective goggles
Description
TO EC STANDARDS
Part number
3055016
Protective goggles
EC approval, standard EN 166. Antifogging.
For operator safety. Pack: pouch.
Description
Protective goggles – bronze
Protective clothing
Protective clothing
Part number
001001324R
Goggles with bronze-tinted polycarbonate lenses.
EC approval, standard EN 166: 2001 Optical class 1.
PPE category 2. Free of optical distortion (EN 166170), impact resistant, 100% UV filtration (EN 172),
anti-fog, anti-scratch, anti-static and anti-glare in
sunlight.
Lenses adjustable. Pack: carton.
Description
Protective goggles – clear
Part number
001001325R
Goggles with clear polycarbonate lenses. EC approval,
standard EN 166: 2001 Optical class 1. PPE category
2. Free of optical distortion (EN 166-170), impact
resistant, 100% UV filtration (EN 172), anti-fog, antiscratch, anti-static and anti-glare in sunlight.
Lenses adjustable. Pack: carton.
Description
Grey protective goggles with earplugs
Part number
001001326R
Goggles with grey-tinted polycarbonate lenses. EC
approval, standard EN 166: 2001. Optical class 1. PPE
category 2. Impact resistant, UV-stable and anti-glare.
Temples and elastic adjustable to allow comfortable fit
in any operating conditions. Complete with earplugs
and cord, EC approval, standard EN 352 - 2. SNR
attenuation: 32 dB (up to 112 dBA). Pack: carton.
Description
Earplugs with cord
Part number
001001327
Earplugs and cord, EC approval, standard EN 352
– 2 with SNR attenuation 32 dB (up to 112 dBA).
Pack: carton.
193
Protective clothing
Protective clothing
TO EC STANDARDS
Professional chain-resistant gloves
EC approval, standards EN 420/03, EN 388/03, EN 381-7/99. PPE category 2, class 2 (resistant to chain speeds of up to 24 m/
sec). Made of 1.2 – 1.4 mm gauge full-grain cowhide. Double thickness on palm and thumb to provide high strength and absorb
vibrations. Elasticated cuff preventing the entry of foreign matter. Leather reinforcement protecting wrist artery.
Further reinforcement stitched on the back protects against wear. Chain resistant protection applied to back of left glove only,
in conformity with current safety standards on working with chainsaws. Pack: pouch.
Description
Part number
Chain-resistant gloves size S - 8
001001382
Chain-resistant gloves size M - 9
001001383
Chain-resistant gloves size L - 10
001001384
Chain-resistant gloves size XL - 11
001001385
Chain-resistant gloves size XXL - 12
001001386
TO EC STANDARDS
Professional chain-resistant gloves with oversleeve and elasticated cuff
EC approval to standards EN 420/03 - EN 388/03 - EN 381-7/99. PPE category 2, class 2 (resistant to chain speeds of up to 24
m/sec). Made of 1.2 - 1.4 mm gauge full-grain cowhide. Double layer on the palm and thumb for high strength and absorption
of vibrations. External sleeve made of split leather. Wrist artery protection. Elasticated cuff to keep out foreign matter. Additional
wear-resistant reinforcement stitched on the back. Chain-resistant protection applied solely on the back of the left hand in
compliance with the regulations on working with a chain saw. Pack: pouch.
Description
Part number
Chain-resistant gloves S- 8
3255005
Chain-resistant gloves M - 9
3255006
Chain-resistant gloves L - 10
3255007
Chain-resistant gloves XL - 11
3255008
Chain-resistant gloves XXL - 12
3255009
TO EC STANDARDS
Professional anti-vibration gloves
EC approval, standards EN 420 - EN 388. PPE category 2. Made of 1.2 – 1.4 mm gauge full-grain cowhide. Double thickness
on palm and thumb to provide high wear resistance and greater comfort. Elasticated cuff prevents the entry of foreign matter.
Leather guard protecting wrist artery. Special anti-vibration feature fitted to palm and back for maximum attenuation of vibrations.
Pack: pouch.
194
Description
Part number
Anti-vibration gloves size S - 8
001001372
Anti-vibration gloves size M - 9
001001373
Anti-vibration gloves size L - 10
001001374
Anti-vibration gloves size XL - 11
001001375
Anti-vibration gloves size XXL - 12
001001376
Protective visor
TO EC STANDARDS
Description
Super-professional mesh visor
Part number
001000939A
Protective clothing
Protective clothing
Professional mesh visor with EC approval and made
to standard EN 1731-S, double adjustment facility
with terry cloth headband. Pack: carton with 8 pcs.
Description
Super-professional polycarbonate visor
Part number
001000940A
Professional visor in polycarbonate with EC approval
and made to standard EN 166, optical class 1 and
mechanical resistance class B, antifogging. Double
adjustment with terry cloth headband. Pack: carton
with 8 pcs.
Description
Professional mesh visor with hearing defenders
Part number
001001142
Professional mesh visor with EC approval, made
to standard EN 1731-S. Double adjustment with
terry cloth headband. Complete with EC approved
adjustable hearing defenders made to standard EN
352-1. Pack: carton with 1 pc.
Description
Professional polycarbonate visor
with hearing defenders
Part number
001000971A
EC approved protective polycarbonate visor made
to standard EN 166, optical class 1 and mechanical
resistance class B, antifogging. Double adjustment
facility. Complete with EC approved adjustable
hearing defenders made to standard EN 352 - 1.
Pack: carton with 1 pc.
Description
Part number
Visor “plus” in polycarbonate
001000942A
Visor in polycarbonate with EC approval, made to
standard EN 166, optical class 1 and mechanical
resistance class B, adjustable, antifogging, with
terry cloth headband, rugged and lightweight. Pack:
carton with 8 pcs.
Description
“Plus” mesh visor
Part number
001000941A
Protective mesh visor with EC approval, made to
standard EN 1731-S, adjustable with terry cloth
headband, rugged and lightweight. Pack: carton with
8 pcs.
195
Protective clothing
Protective clothing
TO EC STANDARDS
Chain resistant forestry boots
EC approval, standards EN 344, EN 345-1 (class SB-E-P), EN 381-3 (class 3). Personal Protective Equipment (PPE)
category 2 - class 3. Resistant to chain speeds of up to 28 m/sec. Knee-high with rear laces, equipped with cotton
inner boot, insole in absorbent felt, ankle guard reinforcement, reflector. Anti-crushing toecap, anti-piercing soleplate
and blade blocking protection on top of foot and on shin. Sole features “carrarmato” style lugs. Pack: carton.
Description
Part number
Size 41 class 3
001001079A
Size 42 class 3
001001080A
Size 43 class 3
001001081A
Size 44 class 3
001001082A
Size 45 class 3
001001083A
TO EC STANDARDS
Chain-resistant forestry boots
EC approval, standard EN ISO17249 (class 2), EN-ISO20344, EN-ISO20345 (class S3CI-HRO). PPE category 2 - class 2. Resistant
to chain speeds of up to 24 m/sec. Boots with full grain water-resistant leather upper, laced to the top, and inner of leather and
breathable fabric, impact-resistant padding at calf height, anatomically contoured footbed of antistatic “EVA” with high sweat
absorption / deabsorption coefficient. Sole in vulcanized HRO rubber (resistant to temperatures up to 300 °C) with deep cleated
tread, puncture resistant sole plate, rigid toecap and blade guarding from instep up to shin, and on the sides. Pack: carton.
Description
196
Part number
Size 41 class 2
001000975B
Size 42 class 2
001000976B
Size 43 class 2
001000977B
Size 44 class 2
001000978B
Size 45 class 2
001000979B
Nothing but the best consumables to keep
your machines running smoothly.
Lubricants and
sundry accessories
197
Lubricants
Lubricants
Special oil for 2-stroke engines
Special “PROSINT 2” synthetic ester-based lubricant, expressly formulated for high-performance 2-stroke engines. Special oil
for use at 2% (50:1). Effective lubrication at high temperatures. Low emissions, reduced wear and clean engine. Exceeds API TC,
JASO FC and ISO-L-EGD specifications Its pre-fluidified composition makes preparing the mixture easy. Colour: dark red. Pack:
carton 20 pcs x 100 ml or 12 pcs x 1 L or 4 pcs x 5 L.
Description
Part number
Special oil “PROSINT 2” - 100 ml bottle
001001363
Special oil “PROSINT 2” - 1 l can
001001364
Special oil “PROSINT 2”
1 litre bottle with measure
001001406
Special oil “PROSINT 2” - 5 l bottle
001001404
Special oil for 2-stroke engines
“EUROSINT 2” special oil with 100% synthetic esters. Used at 2% (50:1), this oil is ideal for the lubrication of competition or high
performance two-stroke motors. High-resistance lubricating film and excellent anti-wear characteristics. Particularly indicated
for exhaust catalysts by virtue of its low smokiness and ash content. Exceeds API TC, JASO FC and ISO-L-EGD specifications.
Colour: dark red. Pack: carton 20 pcs x 100 ml or 12 pcs x 1L.
Description
198
Part number
Kit
polverioil
per“EUROSINT
AT 2062
Special
2” - 100 ml bottle
001001534
Special oil “EUROSINT 2” - 1 l can
001001533
Special oil for 4-stroke engines - SAE 10 W – 30
Highly refined SAE 30 grade mineral oil, specifically formulated and developed for 4-stroke air- and water-cooled engines
designed for gardening sector applications. Mineral type engine oil containing a special combination of additives that give
excellent detergent/dispersant, antioxidant, anticorrisive, and anti-wear properties. Exceeds API SG/CE, MIL - L - 2104 D, MIL L - 46152 C specifications. Pack: carton 16 pcs x 600 ml. Minimum order: 1 carton.
Description
Part number
SAE 30 oil for 4-stroke engines
600 ml can
001001554
Lubricants
Lubricants
“ECOLUBE” biodegradeable oil for chains
“ECOLUBE” biodegradeable oil for perfect lubrication of guide bars and chains while ensuring minimum environmental impact.
Natural product that does not contain mineral oils, sulphur or phosphorous. High lubricating power, antiwear, high viscosity,
oxidation-resistant. Exceeds CEC - L - 33 - A - 93 specifications. Package: carton 12 pcs. x 1 l. or 4 pcs. x 5 l. Minimum order:
1 carton.
Description
Part number
“ECOLUBE” biodegradeable oil - 1 l can
001001553
“ECOLUBE” biodegradeable oil - 5 l can
001001552
NEW LIFE LUBE guide bar and chain protector
A compound formulated expressly for the protection of guide bars and chains, based on a balanced blend of oils which are
specially resistant to low temperatures. Easily biodegradable. Special additives guarantee appreciable protection against wear
and seizure. Good viscosity and pour point. Pack: carton of 9 pcs x 1 l or 4 pieces x 5 l. Minimum order: 1 carton.
Description
Part number
NEW LIFE LUBE guide bar
and chain protector 1 l can
3455003
NEW LIFE LUBE guide bar
and chain protector 5 l can
1108017B
POLAR LUBE mineral oil for guide bars and chains
Mineral-based lubricant, high viscosity, extremely adhesive, formulated for lubrication of chain saw guide bars and chains.
Ensures excellent stability and pour point at low temperatures, good wear protection and outstanding corrosion resistance.
Pack: carton of 12 pcs x 1 l or 4 pieces x 5 l. Minimum order: 1 carton.
Description
Part number
POLAR LUBE mineral oil for guide bars
and chains 1 l can
3455001
POLAR LUBE mineral oil for guide bars
and chains 5 l can
3455002
199
Lubricants
Lubricants
Special grease
Special high quality lithium grease with molybdenum bisulphide for bevel gear pairs, elastic couplings, hedgetrimmer
transmissions, earth auger gear reducers. Recommended for use with all mechanical parts subject to high loads. Exceeds ISO
6743-9; DIN 51825 KPF 2K - 30 specifications. Packing: carton. Quantity per carton: 24. Minimum order: 1 carton.
Description
Special grease/125 g tube
Part number
4174238B
Grease spray
PTFE + lithium soap-based grease spray. Ideal for lubricating the shaker mechanism. Pack of 24 x 100 ml bottles. Minimum
order: 1 carton.
Description
Grease spray
Part number
001001569R
Special additive for petrol and diesel fuels
Special “ADDITIX 2000” additive, ideal for treatment of diesel fuel, 2-stroke mixture and leaded or unleaded petrol. Prevents
deterioration of fuel for at least 12 months and protects from oxidation. Facilitates engine starting, keeps fuel system clean, and
protects against rust and corrosion. Pack of 24 x 125 ml bottles. One full doser cap is sufficient for 5 l of petrol.
Description
Special additive “ADDITIX 2000” - 125 ml bottle
Part number
001000972
Multipurpose concentrated degreasing detergent
High concentration detergent to obtain excellent results in the cleaning of heavily fouled surfaces such as mechanical parts,
engines, tools for gardening, agriculture, and forestry, bicycles and motorcycles. 500 ml bottle with spray dispenser. Pack
containing 12 pcs x 500 ml or 4 pcs x 5 l. Minimum order: 1 carton.
Description
001101009A
Multipurpose concentrated degreasing
detergent/5-litre can
001101222
detergent/500 ml bottle
200
Part number
Kit
polveri per ATconcentrated
2062
Multipurpose
degreasing
2-stroke mixture/oil hose
Resistant to UV radiation and deterioration caused by petrol. Pack: loose.
Description
Part number
2-stroke mixture/oil hose ø 3.2 x 6.4 mm - length 1 m
005100921A
2-stroke mixture hose ø 3 x 5 mm - length 1 m
005101079
Sundry accessories
Sundry accessories
Starting rope spools
High-strength diamond braided nylon rope for maximum resistance to strain and fraying. Pack: loose.
Description
Part number
Starting rope ø 2.5 mm - 100 m
3503121
3503015
005101050
006101034
Fuel/oil can
Fuel/oil can, BAM approved, for transporting in the car; red plastic dual purpose can: 5 l petrol + 2.5 l oil - professional type with
graduated scale. Pack: loose.
Description
Part number
4175158
Fuel/oil can
Quick fill
Refuelling accessory for use with fuel/oil can product number 4175158. For quick and safe refuelling without spillages.
Description
Part number
4180059
Quick fill
Fuel can
BAM approved petrol can for transporting fuel on public highways in accordance with UN regulations. This product is TÜV
certified. Comes with extension hose for troublefree refuelling. A high quality jerry can suitable both for professional and for
home. Pack: carton.
Description
5 l fuel can
Part number
4175169
201
Sundry accessories
Sundry accessories
Extension cords to
- VDE - IMQ standards
Available in various different versions to work easily in the vicinity of the home using electric power tools. 250 V/10 A cable 25
m - 3 x 1 mm2. Pack: bag.
Description
Part number
With Italian plug and Schuko receptacle
001000865
With Schuko plug and receptacle
001000866
p.n. 001000865
Description
p.n. 001000866
Part number
3044102
Schuko receptacle
Funnel
Plastic funnel complete with filter mesh; protects the engine from impurities in the oil. Pack: bag.
Description
Part number
003401054R
Funnel
Toolkit
Aluminium case with internal partitions, complete with special tools, instruction booklets and repair manuals. Pack: loose.
Description
Complete toolkit
202
Part number
3055125
Electronic revolution counter
Measurement range from 100 to 30,000 rpm with tolerance of ± 10 rpm. Ideal for 2-stroke and 4-stroke engines. Functions with
cable or remotely through induction. Rev counter and hour counter functions. Pack: pouch.
Description
Electronic revolution counter
Sundry accessories
Sundry accessories
Part number
001000785
Spark tester
Checks arrival of current to spark plug. To be connected between coil cable and spark plug; functions also when the engine is
running. Pack: loose.
Description
Part number
001000515R
Spark tester
Compression gauge
For monitoring engine status. This instrument makes it is possible to detect anomalies on pistons, rings, valves, gaskets and
cylinders.
Description
Part number
001000392A
Compression gauge
Combination wrenches
To remove spark plugs. Also features screwdriver tip for chainsaw chain tensioning. Pack: loose.
Description
19 mm wrench with bar
Description
Part number
301000129
Part number
17 x 19 mm combination wrench
2304009
2304022
2304029
2304017
2304073
Description
Part number
66060414
203
Sundry accessories
Sundry accessories
Spark plugs
A comprehesive range of spark plugs, expertly developed for the full range of high performance 2 and 4
stroke engines. A combination of innovative materials and special manufacturing methods will guarantee
optimum starting, efficient combustion and lower fuel consumption, prolonging the life of the engine and other
moving parts. In addition, the use of high quality oils like Prosint 2 and Eurosint 2 ensures that there are fewer
unburned residues from combustion, signifying improved performance and less maintenance.
Family
Chain saws
Pruners
Hedgetrimmers
Blower
Multimate
Brushcutters
NGK
Model
CHAMPION
Code
Model
ENKER
Model
Code
Quantity
Pack pcs.
Model
125 - 136 - 137 - 140 - 141 - 156 - 162 - 171 - 199
3055114
BPMR6A
3055101 RCJ - 7Y 10
MT 3700 - MT 4100 - 147 - 152
3055115
BPMR7A
10
132
50030297R RCJ-8Y 8
MT 350 - MT 3500
3055101 RCJ - 7Y 10
MT 440 - MT 4400 e-jet
3055120
CMR7A
165 HD - 181 - 185 - MT 7200 - MT 8200
3055118
BPMR8Y
10
3055113
CMR6A
MT 4000
PT 2500 - PTX 2500
TG 2600 - TG 2750 - TS 327
DS 2800 H
3055120
CMR7A
SA 2062 - SA 3000 - SA 2700 - SA 2700 BP
3055114
BPMR6A
3055115
BPMR7A
3055118
BPMR8Y
SA 2026
Engine unit
10
3055104R RCJ-6Y 10
3055104R RCJ-6Y 10
10
3055101 RCJ - 7Y 10
3055104R RCJ-6Y 10
10
3055104R RCJ-6Y 10
10
8250
STARK 2500 - DS 4500 - DSF 4500
STARK 25 - STARK 26
DS 2800 - DS 3200
3055120
CMR7A
10
DS 2500
3055112
CMR7H
10
H31915Z0H003
CMR5H
1
DS 2600 - DS 3600
DS 3800 - DS 4200 - DSF 4200 - 8300 - 8350 - 8400 - STARK 37
STARK 3700 - STARK 38 - STARK 3800 - STARK 42 - STARK 44 - 8460 - 8530 - 8550 - 8355 - 8405 - 8465 - 8535
3055101
RCJ-7Y 3055109
3055115
BPMR7A
3055101
10 - 12
FSC75PR
10
RCJ-7Y B&S LR - AR - MR 53 - MR 55 TBX - LR 48 TBX (4 IN 1) 3055121 RJ19LM 10
MR 53 TBVI - MR 55 TBI
3055122
10
EMAK K40 - K50 - K55 - K60 - K500 - K600 - K700 - K800 HONDA LR - AR - MR
Garden tractors
EF 63 - 72 - 92 - 102 - 122 - 104 J - 105 J - 106 J
124 J - TWISTER - TUAREG
Water pumps
PA 1030 - PA 1050 - PA 1100 - PC 1050 - C19/20
Lawnmowers
Mistblowers
Sprayer
Shakers
Transporters
Powercutters
3055123
RC9YC
3055122
RC12YC
3055101
10
10
RCJ-7Y 10
3055114
BPMR6A
3055101 RCJ - 7Y 10
AT 2090 - MT 800 - MT 8000
3055115
BPMR7A
3055101
RCJ-7Y 10
IS 2026
3055104R RCJ-6Y 10
IC 2050 - IC 2080
3055101
RCJ-7Y 10
SO 2500 - SO 2500 L
SO 5500 ERGO
3055104R RCJ-6Y 10
3055115
BPMR7A
3055101
10
H31915Z0H003
CMR5H
MZ 2090 - MZ 2100 - MZ 2500 - MZ 2600 -MZ 2050 - MZ 2080 RK TR 1585 R
3055118
BPMR8Y
RCJ-7Y 1
RC9YC 10
3055122 QC12YC 10
10
RCJ-7Y 10
3055123
MZ 2060 - MZ 2065 - MZ 2080 - MZ 2085 R - MZ 2090 R Earth augers
RC12YC AT 2062
MZ 2030
Rotary tillers
204
Code
TR 1540
3055101
TN 2700
3055121 RJ19LM
10
TN 3400
3055122 QC12YC
10
TT 163 - TT 183
10
3055118
BPMR8Y
Always in good hands,
before, during and after purchase.
205
Greater peace of mind and efficiency thanks to technical assistance
Mowing the lawn, clearing up grass and twigs, trimming hedges or thinning the foliage of trees, watering, pruning,
these are important jobs that need to be done, if gardens or outdoor areas are to look good and stay healthy, but they can also
be of value simply as enjoyable pastimes for lovers of greenery and life in the open air. Enjoyable, thanks not least to the high
standards offered by all Efco machines in terms of performance, comfort and safety. A machine must be used correctly and
properly maintained if it is to retain its original quality, add value to the work of the operator and deliver the expected service
life and long-term reliability. Accordingly, the careful observance of a few simple guidelines will ensure you continue to derive
maximum satisfaction from your machine.
Contact only an Efco authorized dealer when making a purchase: you will be advised as to which is the best machine
for your needs, told about correct and safe operating procedures, and instructed how to prepare it for first time use;
Every machine is accompanied by an Operator Instruction Book included in the packaging, which you will receive at the
moment of purchase: be sure to read the book carefully before use;
Have your product checked over periodically by an Efco authorized dealer: this will ensure the machine always stays in
tip-top condition and matches up fully to your expectations;
Always use original spare parts and accessories, which your Efco authorized dealer will be able to supply.
Advantages offered by Efco dealerships
206
Advice on purchase:
the Efco dealer will advise you on the machine best suited to your needs, and provide all pertinent information on correct
use of the product.
Specialized technical service:
users are ensured quality repairs, carried out as quickly as is practically possible. Products for home use are guaranteed
two years.
After-sales service:
all Efco dealers are skilled operators who regularly attend refresher and specialization courses enabling them to offer the
customer clear and comprehensive information, always in line with developments in the sector.
Original parts and accessories:
repairs or replacements of components are carried out using only Efco original spare parts and accessories. A guarantee
that machines will maintain their performance undiminished over time.
Data and illustrations published in the catalogue are not binding where specifications of materials are concerned,
given that these will always be subject to technical improvement. Technical specifications given in the catalogue are
subject to change without notice, as also are directions relating to general use of the equipment.
Certain items are not available in all countries, or are available only on request.
Subject to modifications. Some models are available for certains markets only. - Mod. 3084592H - 2011
It’s an Emak S.p.A. trademark Member of the Yama Group
42011 Bagnolo in Piano (RE) Italy
Tel. +39 0522 956611 • Fax +39 0522 951555
[email protected] • www.myefco.com

2011 Retail Catalogue - Service

Transcription

Similar documents

3-D-Water-Cutting-System „STM 1020 PremiumCut 3D“

RD300 - RotoMetrics

A Song of Ice and Fire

Middle School Europe trip

OSNABURG LOCAL SCHOOL DISTRICT

Contact Autometrix and let`s get started!

C:\Documents and Settings\Owner

Simple Toe-Nail Cutting Service Leaflet March 2013

Kewatec_EASY

The Source The Source