PDF - Dextra Group

Protec LED
PRODUCT SPECIFICATION
INTRODUCTION
Forming part of the well established Protec range, the premium LED variant offers lumen output packages up to 3000lm
making it suitable as a primary light source for high end specifications, such as receptions, offices, retail, corridors, meeting
rooms, airports and educational establishments. With impressive energy cost savings (with short capital cost payback
periods) over its fluorescent equivalents, it is an ideal option to tie in with environmental management policies, requiring a
commitment to energy reduction. The Protec LED comes with a number of bezel, reflector, beam angle and colour
attachment options and once installed, reflectors and colour attachments can be easily removed and replaced. This allows
for lighting updates in-line with changes to room layout, new branding colour schemes or display rearrangement. IP65 rating
can be achieved for use in bathrooms and wet areas and BSEN 12464 glare compliant variants are available for use in
offices. The Protec LED also comes with a range of emergency and dimming options and is also compatible with a wide
range of Dextra sensors offering both presence control and daylight regulation allowing for increased energy savings and
better return on investment. Custom bezels available on request for retrofit applications to ensure suitability for existing
ceiling cut outs.
APPLICATION
Canteen
Commercial/Offices
Corridor
Education
Healthcare/Social Housing
T: 01747 858100 | E: [email protected] | Page 1 of 13
Protec LED
PRODUCT SPECIFICATION
Hotel/Leisure
Industrial/Manufacturing
Office
Retail
Toilet
Transport
Warehouse/Storage
SPECIFICATION
Construction
ABS housing.
ABS bezel.
Anodised aluminium reflectors – OptiSpec or OptiSat.
Zinc plated spring steel fixing clips.
Polycarbonate colour accessories.
Custom bezels available on request for retrofit applications.
Performance
LORs in excess of 90%.
Although lumen packages will always remain the same, lumens per watt will only improve in line with developments to the
Philips Fortimo chip technology. This offers improved performance and greater efficiency. For further information about the
current generation please contact the Dextra Technical team on 01747 858100.
Philips Lumileds LM80 verified: 90% LED lumen maintenance at 60,000 operating hours (DLM version only).
L2 compliant 60 Llm/w*.
ECA compliant*.
*specific variants only
Control
Philips Fortimo/Xitanium driver.
Dimming options include Touch-Dim and DALI.
Emergency
3 hour maintained and self test emergency.
Installation
Four point self clamping spring bracket retains fitting in ceiling for an ultra quick installation.
One cut-out size – 160mm diameter.
Ceiling thickness from 3mm to 42mm (use Liteyoke 3mm plywood patress when mounting to soft tiles).
Suitable for plasterboard, mineral fibre and metal tile installation.
T: 01747 858100 | E: [email protected] | Page 2 of 13
Protec LED
PRODUCT SPECIFICATION
Variations
Once installed, reflectors and colour attachments can be easily removed and replaced. This allows for lighting updates inline with changes to room layout, new branding colour schemes or display rearrangement.
There are a number of bezel, reflector, beam angle and colour attachment options.
IP44 clear cover fits all model sizes and can be fitted over colour attachments (IP65 if silicone sealed).
IMAGES
Product Images
T: 01747 858100 | E: [email protected] | Page 3 of 13
Protec LED
PRODUCT SPECIFICATION
T: 01747 858100 | E: [email protected] | Page 4 of 13
Protec LED
PRODUCT SPECIFICATION
Project Images
T: 01747 858100 | E: [email protected] | Page 5 of 13
Protec LED
PRODUCT SPECIFICATION
T: 01747 858100 | E: [email protected] | Page 6 of 13
Protec LED
PRODUCT SPECIFICATION
T: 01747 858100 | E: [email protected] | Page 7 of 13
Protec LED
PRODUCT SPECIFICATION
T: 01747 858100 | E: [email protected] | Page 8 of 13
Protec LED
PRODUCT SPECIFICATION
T: 01747 858100 | E: [email protected] | Page 9 of 13
Protec LED
PRODUCT SPECIFICATION
TECHNICAL
PTECDLED
PTECSLED
WARRANTY
All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time.
Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis and
credit given against defective product returned. The course of action taken will be at our discretion and dependent on the
nature of the defect.
The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up to 5
years in total from the time of purchase. This comprises labour and parts for the first 3 years and free of charge components
T: 01747 858100 | E: [email protected] | Page 10 of 13
Protec LED
PRODUCT SPECIFICATION
only for the final 2 years.
PROTEC LED FR 8W GU10 variants and Emergency LED ranges are exempt from the 5 year warranty and are supplied with
1 year warranty only. PROTEC LED COB luminaires are supplied with a two year warranty for replacement luminaires only.
All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation or
unsuitable environmental conditions.
It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or
replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In the
event that no defect is found with the product our costs for attending site will be recharged to the customer and credit will not
be issued against returned products.
No consequential losses incurred resulting from any defect with our product will be reimbursed.
Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are
supplied with a twelve month warranty only.
5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where
failures exceed the component manufacturers expected failure rate and lumen depreciation.
If you require any assistance with regards to our products please do not hesitate to contact our Customer Services
department on 01747 858100.
ORDER CODES
Luminaire Codes
Code
Description
Circuit Wattage
PTEC D1100 HF C84
Protec LED DLM, 1100 Lumen / Fixed Output, Colour 84 (ECA)
9.4w
PTEC D2000 HF C84
Protec LED DLM, 2000 Lumen / Fixed Output, Colour 84 (ECA)
17.5w
PTEC D3000 HF C84
Protec LED DLM, 3000 Lumen / Fixed Output, Colour 84 (ECA)
28.0w
PTEC D1100 DIM C84
Protec LED DLM, 1100 Lumen / Touch Dim / DALI, Colour 84 (ECA)
9.4w
PTEC D2000 DIM C84
Protec LED DLM, 2000 Lumen / Touch Dim / DALI, Colour 84 (ECA)
17.5w
PTEC D3000 DIM C84
Protec LED DLM, 3000 Lumen / Touch Dim / DALI, Colour 84 (ECA)
28.0w
PTEC S1400 HF C84
Protec LED SLM, 1400 Lumen, High Frequency Driver, Colour 84 (ECA)
9.4w
PTEC S1400 DIM C84
Protec LED SLM, 1400 Lumen, Touch Dim/DALI, Colour 84 (ECA)
9.4w
PTEC S2000 HF C84
Protec LED SLM, 2000 Lumen, High Frequency Driver, Colour 84 (ECA)
15.1w
PTEC S2000 DIM C84
Protec LED SLM, 2000 Lumen, Touch Dim/DALI, Colour 84 (ECA)
15.1w
Must be sold in conjunction with reflector listed below.
(Reflectors ordered separately)
Custom bezels available on request for retrofit applications to ensure suitability for existing ceiling cut outs, please enquire
with our sales department for further information.
Protec DLM
SILVER BEZEL
PTEC DG R
Silver Bezel / OptiSpec Reflector (No Coloured Ring)
PTEC DG R WH
Silver Bezel / OptiSpec Reflector / White Halo
PTEC DG R GR
Silver Bezel / OptiSpec Reflector / Green Halo
PTEC DG R BL
Silver Bezel / OptiSpec Reflector / Blue Halo
PTEC DG R OR
Silver Bezel / OptiSpec Reflector / Mango Halo
PTEC DG SSR
Silver Bezel / OptiSat Reflector (No Coloured Ring)
T: 01747 858100 | E: [email protected] | Page 11 of 13
Protec LED
PRODUCT SPECIFICATION
PTEC DG SSR WH
Silver Bezel / OptiSat Reflector / White Halo
PTEC DG SSR GR
Silver Bezel / OptiSat Reflector / Green Halo
PTEC DG SSR BL
Silver Bezel / OptiSat Reflector / Blue Halo
PTEC DG SSR OR
Silver Bezel / OptiSat Reflector / Mango Halo
PTEC DG R DGR
Silver Bezel / OptiSpec Reflector (No Coloured Ring) Drop Glass Ring
PTEC DG SSR DGR
Silver Bezel / OptiSat Reflector (No Coloured Ring) Drop Glass Ring
PTEC DG R MPD
Silver Bezel / OptiSpec Reflector, Micro Prism Diffuser
PTEC DG R OD
Silver Bezel / OptiSpec Reflector, Opal Diffuser
PTEC DG SSR MPD
Silver Bezel / OptiSat Reflector, Micro Prism Diffuser
PTEC DG SSR OD
Silver Bezel / OptiSat Reflector, Opal Diffuser
WHITE BEZEL
PTEC DW R
White Bezel / OptiSpec Reflector (No Coloured Ring)
PTEC DW R WH
White Bezel / OptiSpec Reflector / White Halo
PTEC DW R GR
White Bezel / OptiSpec Reflector / Green Halo
PTEC DW R BL
White Bezel / OptiSpec Reflector / Blue Halo
PTEC DW R OR
White Bezel / OptiSpec Reflector / Mango Halo
PTEC DW SSR
White Bezel / OptiSat Reflector (No Coloured Ring)
PTEC DW SSR WH
White Bezel / OptiSat Reflector / White Halo
PTEC DW SSR GR
White Bezel / OptiSat Reflector / Green Halo
PTEC DW SSR BL
White Bezel / OptiSat Reflector / Blue Halo
PTEC DW SSR OR
White Bezel / OptiSat Reflector / Mango Halo
PTEC DW R DGR
White Bezel / OptiSpec Reflector (No Coloured Ring) Drop Glass Ring
PTEC DW SSR DGR
White Bezel / OptiSat Reflector (No Coloured Ring) Drop Glass Ring
PTEC DW R MPD
White Bezel / OptiSpec Reflector, Micro Prism Diffuser
PTEC DW R OD
White Bezel / OptiSpec Reflector, Opal Diffuser
PTEC DW SSR MPD
White Bezel / OptiSat Reflector, Micro Prism Diffuser
PTEC DW SSR OD
White Bezel / OptiSat Reflector, Opal Diffuser
PTEC D IP44
IP44 Front Cover (IP44 From Front Only)
(IP65 can be achieved if cover is silicone sealed in place)
Protec SLM
SILVER BEZEL
PTEC SG SSMD BL
Silver Bezel, Optisat Medium Reflector, Blue Ring
PTEC SG SSMD GR
Silver Bezel, Optisat Medium Reflector, Green Ring
PTEC SG SSMD OR
Silver Bezel, Optisat Medium Reflector, Orange Ring
PTEC SG SSMD WH
Silver Bezel, Optisat Medium Reflector, White Ring
PTEC SG SSNR BL
Silver Bezel, Optisat Narrow Reflector, Blue Ring
PTEC SG SSNR GR
Silver Bezel, Optisat Narrow Reflector, Green Ring
PTEC SG SSNR OR
Silver Bezel, Optisat Narrow Reflector, Orange Ring
PTEC SG SSNR WH
Silver Bezel, Optisat Narrow Reflector, White Ring
PTEC SG SSOA
Silver Bezel, Optisat Open Area Reflector
PTEC SG SSOA BL
Silver Bezel, Optisat Open Area Reflector, Blue Ring
PTEC SG SSOA GR
Silver Bezel, Optisat Open Area Reflector, Green Ring
PTEC SG SSOA OR
Silver Bezel, Optisat Open Area Reflector, Orange Ring
PTEC SG SSOA WH
Silver Bezel, Optisat Open Area Reflector, White Ring
WHITE BEZEL
PTEC SW SSMD BL
White Bezel, Optisat Medium Reflector, Blue Ring
T: 01747 858100 | E: [email protected] | Page 12 of 13
Protec LED
PRODUCT SPECIFICATION
PTEC SW SSMD GR
White Bezel, Optisat Medium Reflector, Green Ring
PTEC SW SSMD OR
White Bezel, Optisat Medium Reflector, Orange Ring
PTEC SW SSMD WH
White Bezel, Optisat Medium Reflector, White Ring
PTEC SW SSNR BL
White Bezel, Optisat Narrow Reflector, Blue Ring
PTEC SW SSNR GR
White Bezel, Optisat Narrow Reflector, Green Ring
PTEC SW SSNR OR
White Bezel, Optisat Narrow Reflector, Orange Ring
PTEC SW SSNR WH
White Bezel, Optisat Narrow Reflector, White Ring
PTEC SW SSOA
White Bezel, Optisat Open Area Reflector
PTEC SW SSOA BL
White Bezel, Optisat Open Area Reflector, Blue Ring
PTEC SW SSOA GR
White Bezel, Optisat Open Area Reflector, Green Ring
PTEC SW SSOA OR
White Bezel, Optisat Open Area Reflector, Orange Ring
PTEC SW SSOA WH
White Bezel, Optisat Open Area Reflector, White Ring
PTEC S IP44
Protec LED SLM, IP44 Front Cover (IP44 from front only)
Emergency
Code
Description
E3
3 Hour Integral Emergency
ST3
Self Test
AT3
Autotest Emergency
Miscellaneous
Code
Description
C83
Colour Rendering Index 80, Colour Temperature 3000K
T: 01747 858100 | E: [email protected] | Page 13 of 13