flexam ft875 finishing touch - table model
Transcription
flexam ft875 finishing touch - table model
FLEXAM FT875 FINISHING TOUCH - TABLE MODEL 18 OT - machinery equipment and tools > 1871 small machines Article number 75.25.7110.0 Flexam FT875 Finishing Touch - table model Technische data Sanding machine, specially usefull to correct custom insoles. Equipped with a long abrasive belt which runs on a low noise disc. The FLEXAM construction (the motor is placed on the back) allows you to have a lot of free space between the scouring belt and the tools on the right. On the right, the bajonet fitting makes exchanging tools very easy. FLEXAM has many different tools to offer, allowing you to give the finishing touch to your work. Choose for example the Podologica tool. This machine runs on single phase 230 Volts, so it can be used anywhere. On the back is the connection to an ordinary dust extractor. The dust bins are easily removable so very easy to empty. The machine runs smooth without much noise. Four rubber feet on the bottom make the machine free of vibrations. afmetingen B x D x H toerental aansluitwaarde fasen mm U/min V/Hz/kW Ph 450 x 450 x 350 2460 230/50/0.55 1 materiaal kleur gewicht netto kg steel Ral 7035 24 schuurband L x B aansluitdiameter aanbevolen debiet mm mm m3/h 875 x 100 38 265 Executive series Option: - dust extractor DH245( (art. 75.70.9919.0) - worktable FTW100 (art: 75.25.7112.0) - Connection for extern dust extraction system - Ø70mm Jos America Machines B.V. Mandenmaker 14, Industriepark 'Het Hoog', 5253 RC Nieuwkuijk [NL] Tel. +31 (0)73 511 9123, Fax. +31 (0)73 511 5097, [email protected] www.josamerica.com yes PODOLOGICA FINGER SANDING ROLL FOR MAIN AXIS ON BAYO Ø 21 X W 40 L = 131MM 19 OT - various > 1942 podologica tools Article number 75.50.3371.0 Podologica finger sanding roll for main axis on bayo Ø 21 This scouring roll is very handy for working on insoles. Jos America Machines B.V. Mandenmaker 14, Industriepark 'Het Hoog', 5253 RC Nieuwkuijk [NL] Tel. +31 (0)73 511 9123, Fax. +31 (0)73 511 5097, [email protected] www.josamerica.com PODOLOGICA (MEDIUM) Ø 45 X W 70MM ON BAYO 105MM 19 OT - various > 1942 podologica tools Article number 75.50.3376.0 Podologica (medium) Ø 45 x W 70mm on bayo 105mm Jos America Machines B.V. Mandenmaker 14, Industriepark 'Het Hoog', 5253 RC Nieuwkuijk [NL] Tel. +31 (0)73 511 9123, Fax. +31 (0)73 511 5097, [email protected] www.josamerica.com SCOURER PODOLOGICA W70 D45MM K40 65 devices + bayonets > 6510 Podologica tools Article number 51.01.1004.0 scourer Podologica W70 D45mm K40 Jos America Machines B.V. Mandenmaker 14, Industriepark 'Het Hoog', 5253 RC Nieuwkuijk [NL] Tel. +31 (0)73 511 9123, Fax. +31 (0)73 511 5097, [email protected] www.josamerica.com SCOURER PODOLOGICA W70 D45MM K80 65 devices + bayonets > 6510 Podologica tools Article number 51.01.1005.0 scourer Podologica W70 D45mm K80 Jos America Machines B.V. Mandenmaker 14, Industriepark 'Het Hoog', 5253 RC Nieuwkuijk [NL] Tel. +31 (0)73 511 9123, Fax. +31 (0)73 511 5097, [email protected] www.josamerica.com WORKTABLE FTW100 - FOR PLACING FT875 18 OT - machinery equipment and tools > 1871 small machines Worktable FTW100 - for placing FT875 The FTW 100 is a complete worktable with fume extraction, the possibility to put a vacuum cleaner inside and a top unit with shelves and lighting. The work top is equipped with a glue plate with integrated side fume extraction and there is sufficient space for placing a FT875 Finishing Touch bench grinder. Furthermore, the unit has 2 switches, one for switching on/off the lighting and 1 for switching on/off the vacuum cleaner - color RAL 7035 (lichtgrijs) - dimensions wxdxh 1000x750x1800mm - excluding vacuum cleaner DH245 (art:75.70.9919.0) - excluding FT875 Finishing Touch (art: 75.25.7110.0) Technische data afmetingen B x D x H mm 1000 x 750 x 1970 werkhoogte voltage fasen mm V Ph 940 230 1 kleur aansluitdiameter mm Ral 7035 100 Article number Jos America Machines B.V. Mandenmaker 14, Industriepark 'Het Hoog', 5253 RC Nieuwkuijk [NL] Tel. +31 (0)73 511 9123, Fax. +31 (0)73 511 5097, [email protected] www.josamerica.com 75.25.7112.0 VACUUM CLEANER DH245 19 OT - various > 1999 various tools Vacuum Cleaner DH245 Professional vacuum cleaner suitable for dry vacuuming. - trolley - with cable and hose 4 mtr - extra high air displacement - Automatic start Technische data afmetingen B x D x H mm geluidsniveau aansluitwaarde kleur dB(A 60 V/Hz/kW 230 / 50 / 1,2 Blue gewicht netto nominale volume nominaal onderdruk kg m³/h Pa 9 245 17.000 tank inhoud L 10 380 x 500 x 485 Article number Jos America Machines B.V. Mandenmaker 14, Industriepark 'Het Hoog', 5253 RC Nieuwkuijk [NL] Tel. +31 (0)73 511 9123, Fax. +31 (0)73 511 5097, [email protected] www.josamerica.com 75.70.9919.0 COMPACT S 75 SINGLE - WITHOUT NAUMKEAG 18 OT - machinery equipment and tools > 1873 Compact / work unit series Compact S 75 single - without naumkeag Professional sander, 75cm wide (approx 30 inches), fitted with a bayonet connection on the left and a 100mm wide scouring belt with diameter 100mm (or indicate if you want diameter 170mm free of charge). With naumkeag motor. A common used option is the 2nd bayonet connection on the right, which allows you to use the machine with extra 2 tools on the side at the same time without exchanging them. The machine has a low noise level and has a powerful internal dust extraction, but can also be fitted with an external connection. The free space behind the sanding belts is enlarged, so you will not touch the backside during your work. The machine is equipped with a safety switch and is powder coated in light grey Ral 7035 with second colour yellow, but you are free to choose the second colour free of charge. Powered triple phase, 400 volts with red connector 16A CE-5P. On request also deliverable in 1 phase 230 volt. Technische data afmetingen B x D x H mm werkhoogte aansluitwaarde fasen mm 1070 - 1170 V/Hz/kW 230-400/50/1,85 Ph 3 750 x 750 x 1590 kleur accent kleur gewicht netto kg Ral 7035 Ral 2008 / Ral 100 197 bajos contactschijf 100 x 100 schuurband 1480 x 100 mm mm 2 1 1 korrel Avantage series 18 - 120 1 Article number Jos America Machines B.V. Mandenmaker 14, Industriepark 'Het Hoog', 5253 RC Nieuwkuijk [NL] Tel. +31 (0)73 511 9123, Fax. +31 (0)73 511 5097, [email protected] www.josamerica.com 75.25.7301.0 FLEXAM UNDERCOVER 100 18 OT - machinery equipment and tools > 1874 Flexam Undercover 100 Flexam Undercover 100 The Undercover 100 is used in the orthopaedic shoe technique. This machine is designed and built especially for the use in hospitals and fitting rooms. This machine has everything that is necessary for making small corrections. Suppose, you share your location in the hospital with other para-medics. It is annoying to leave your equipment, where others will have problems. Often it is even not allowed. When you are just occasionally in the hospital, we recommend the new Flexam Finishing Touch FT 875. However, if you work regularly, it would be nice if you could leave your equipment, without hindering others. From now on, you can! Especially for those employees, we developed the Flexam Undercover 100. You will have all tools available and it will safe time. The unit comes including a glue table with activated carbon filtration, lighting, a long sanding belt sander, a naumkeag as well as a bayonet for all kind of tools. Also an air gun belongs to the basic equipment. There is no need for triple phase power supply, so a normal single phase connector will do the job. The cabinet can be closed easily after work has been done. Technische data afmetingen B x D x H werkhoogte toerental mm mm U/min geluidsniveau aansluitwaarde kleur dB(A 75 V/Hz/kW 230 1ph/50/2,52 Ral 7035 gewicht netto bajos contactschijf 100 x 100 kg bimsmotor mm 1000 x 570 x 1980 1117 3000 275 1 1 1 Article number Jos America Machines B.V. Mandenmaker 14, Industriepark 'Het Hoog', 5253 RC Nieuwkuijk [NL] Tel. +31 (0)73 511 9123, Fax. +31 (0)73 511 5097, [email protected] www.josamerica.com 75.25.7405.0