FK Catalog - FK Rod Ends

Transcription

F.K. BEARINGS came onto the scene quietly over 24 years ago. They did not make a huge splash, but
quickly won the customers over with fair pricing, and plenty of inventory. While the industrial market
struggled to get product from the old stand-bys, the racing market embraced a supplier that would maintain inventory throughout the limited season. Recently, to further assure timely delivery, F.K. Bearings set
up two regional warehouses. Filled to the brim with inventory, these warehouses can offer localized service for emergency orders.
Over the years the F.K. Bearings product line has grown to encompass many different industries. From the
wilds of Baja Mexico, to the “good old boys” of NASCAR…from mowers to care for your lawn, to fitness
equipment to groom your body, you’ll find F.K. Rod Ends!
In your hands is our latest offering in an evolving program designed to supply rod end products to users
everywhere! You will find rod ends and spherical bearings made from mild steel, chromemoly/alloy steel,
aluminum and stainless. Special care is taken during every step of the manufacturing process to insure
you the highest quality products.
With almost 10,000 combinations of rod ends and spherical bearings available, you will appreciate the
effort that goes into filling each order. Within our state-of-the-art facility, we carefully craft our products,
so we are able to say, “Yes, it’s in stock” when you call.
PTFE LINERS
F.K. Bearings offers self-lubricating PTFE liners on nearly all of our rod ends and spherical bearings. The
PTFE liner is chemically bonded to the inner diameter of the race. This liner offers a very high load-carrying capacity and has greatly increased dynamic and wear characteristics. The operating temperatures
of our liners range from –65° to 325° F.
CUSTOMER SERVICE
All F.K.’s sales personnel have extensive product training to assist you in the selection of the proper bearing for your application. District sales representatives for F.K. work very closely with inside sales and engineering, to ensure you excellent service and on-time delivery.
Thank you for your interest in F.K. Rod Ends.
CONTENTS
Commercial / Industrial Rod Ends
CM / CF
ECM / ECF
CM-T / CF-T
SCM-T / SCF-T
CM-M / CF-M
SCM-MT / SCF-MT
CM-Y / CF-Y
CM SPECIAL
CMX / CMX-T
2-piece,
2-piece,
2-piece,
2-piece,
2-piece,
2-piece,
2-piece,
2-piece,
2-piece,
metal to metal .................................................................................................4
Import, metal to metal ......................................................................................5
PTFE lined, self lubricated.................................................................................6
stainless steel with PTFE liner ...........................................................................7
metric, metal to metal ......................................................................................8
metric, stainless steel with PTFE liner ................................................................9
metal to metal with studs................................................................................10
metal to metal, special bore sizes ....................................................................11
metal to metal, heat treated, alloy steel ............................................................20
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
plastic race....................................................................................................12
sintered bronze race .......................................................................................13
male, alloy steel race ......................................................................................14
female, alloy steel race ...................................................................................15
male, high strength alloy.................................................................................16
female, high strength alloy ..............................................................................17
male, high strength alloy steel with injected nylon race ......................................21
precision, decorative chrome plated..................................................................22
male, high strength alloy, chrome or bright nickel plated, self lubricating..............23
male, stainless steel - wear resistant, self lubricating .........................................24
female, stainless steel - wear resistant, self lubricating .......................................25
male, high strength alloy steel, high misalignment, self lubricating ......................27
male, Performance Racing, stainless steel insert, self lubricating .........................28
male aluminum body ......................................................................................30
female aluminum body ...................................................................................31
Precision Series Rod Ends
NJM / NJF
M-SB / F-SB
JM / JML
JF / JFL
JMX / JMXL
JFX / JFXL
KMX / KMXL
RJM / RJF
RJMX-T
SJM-T
SJF-T / SJFL-T
HJMX-T / HJMXL-T
PMX-T / PMXL-T
ALJM / ALJML
ALJF / ALRSML
Extra Strength-Heavy Duty Shank
RSM / RSM-T
RSMX / RSMX-T
RRSMX-T
SRSM-T
HRSMX-T
EMX
ALRSM
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
3-piece,
low carbon steel, PTFE liners available .............................................................18
alloy steel, PTFE liners available ......................................................................19
alloy steel, chrome or bright nickel plated, self lubricating ..................................23
male, stainless steel, self lubricating.................................................................24
high strength alloy steel, high misalignment, self lubricating ...............................26
alloy steel, PTFE liners available ......................................................................29
aluminum body ..............................................................................................32
Spherical Bearings
HIN-T
COM / COMH
FKS / FKS-T
FKSSX-T / FKSSX-TV / PFKSSX-T
WSSX-T / WSSX-TV
IN-P
K SERIES
GEZ-ES
GE-ES
High misalignment, alloy steel, heat treated, self lubricating............................................26
Commercial series, low carbon steel .............................................................................34
Precision narrow series, alloy steel, heat treated.............................................................35
Precision narrow series, stainless steel, self lubricating ...................................................36
Wide series, stainless steel, self lubricating....................................................................37
Plastic race series .......................................................................................................38
Special purpose series .................................................................................................39
Inch - Fractured race series..........................................................................................40
Metric - Fractured race series .......................................................................................41
Special Products
ADJUSTER LADDER
B
HB
CTR
AJNR / AJNL
SJNR / SJNL
SJNR-M / SJNL-M
STUDS
RD
CV
WELDABLE TUBE ENDS
RERS SERIES SEALS
WS SERIES SEALS
3/4" right to left hand turnbuckle..................................................................................33
Ball Joints..................................................................................................................33
High misalignment bushings ........................................................................................42
Center finders for rod end adjustment lengths ................................................................42
Inch Aluminum jam nuts .............................................................................................43
Inch Steel jam nuts .....................................................................................................43
Metric Steel jam nuts .................................................................................................43
Studded rod ends........................................................................................................43
Solid rod ends ............................................................................................................44
Clevis ........................................................................................................................44
Threaded tube ends for rod end bearings.......................................................................45
Molded-rubber boots ...................................................................................................46
WS Series seals ..........................................................................................................47
Additional Information
Engineering Data....................................................................................................................................................48
Interchange Table ...................................................................................................................................................49
CM / CF
2-PIECE, METAL TO METAL
MATERIALS
MALE ROD
ENDS
B
DIA.
D
DIA.
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.0025
-.0005
+.010
-.010
+.005
-.005
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.437
.500
.562
.625
.750
.875
CM3*
CM4*
CM5*
CM6
CM7
CM8
CM10
CM12
CML3*
CML4*
CML5*
CML6
CML7
CML8
CML10
CML12
W
T
WIDTH WIDTH
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
REF.
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
.234
.250
.312
.359
.406
.453
.484
.593
.437
.500
.625
.719
.812
.937
1.125
1.312
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
.750
1.000
1.250
1.250
1.375
1.500
1.625
1.750
20
27
22
22
21
20
26
24
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
1,210
2,225
3,600
5,100
6,402
8,386
9,813
14,290
.03
.04
.07
.11
.15
.24
.36
.57
*GREASE FITTINGS ARE NOT SUPPLIED ON THESE SIZES. MALE
ROD END LOAD RATINGS BASED ON NO LUBRICATING FITTING.
FOR LOAD RATINGS WITH LUBRICATOR, PLEASE CONTACT THE
F.K. ENGINEERING DEPARTMENT.
MATERIALS
FEMALE ROD
ENDS
B
DIA.
RIGHT
LEFT
HAND
HAND
+.0025
PART NO. PART NO. -.0005
CF3*
CF4-3
CF4
CF5
CF6
CF7
CF8
CF10
CF12
CFL3*
N/A
CFL4
CFL5
CFL6
CFL7
CFL8
CFL10
CFL12
.1900
.2500
.2500
.3125
.3750
.4375
.5000
.6250
.7500
D
DIA.
W
T
BALL
WIDTH WIDTH DIA.
A
LGTH
N
THD.
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
+.010
-.010
+.005
-.005
REF.
REF.
+.015
-.015
UNF
2B
.625
.750
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.375
.437
.500
.562
.625
.750
.875
.234
.250
.250
.312
.359
.406
.453
.484
.593
.437
.500
.500
.625
.719
.812
.937
1.125
1.312
1.062
1.312
1.312
1.375
1.625
1.812
2.125
2.500
2.875
10-32
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
C
LGTH
E
DIA.
F
FLAT
.500
.687
.687
.687
.812
.937
1.062
1.375
1.562
.406
.468
.468
.500
.687
.750
.875
1.000
1.125
.312
.375
.375
.437
.562
.625
.750
.875
1.000
20
27
27
22
22
21
20
26
24
2,100
3,250
3,250
3,934
5,100
6,420
9,100
9,800
14,250
.04
.05
.05
.08
.13
.18
.29
.43
.65
NOTES: FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: CF6Z
4
ECM / ECF IMPORT
2-PIECE, METAL TO METAL
MATERIALS
MALE ROD
ENDS
B
DIA.
D
DIA.
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.0025
-.0005
+.010
-.010
+.005
-.005
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.437
.500
.562
.625
.750
.875
ECM3*
ECM4*
ECM5*
ECM6
ECM7
ECM8
ECM10
ECM12
ECML3*
ECML4*
ECML5*
ECML6
ECML7
ECML8
ECML10
ECML12
W
T
WIDTH WIDTH
BALL
BODY
ALLOY STEEL
HEAT TREATED
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
REF.
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
.234
.250
.312
.359
.406
.453
.484
.593
.437
.500
.625
.719
.812
.937
1.125
1.312
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
.750
1.000
1.250
1.250
1.375
1.500
1.625
1.750
20
27
22
22
21
20
26
24
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
1,210
2,225
3,600
5,100
6,402
8,386
9,813
14,290
.03
.04
.07
.11
.15
.24
.36
.57
MATERIALS
FEMALE ROD
ENDS
B
DIA.
RIGHT
LEFT
HAND
HAND
+.0025
ECF3*
ECF4
ECF5
ECF6
ECF7
ECF8
ECF10
ECF12
ECFL3*
ECFL4
ECFL5
ECFL6
ECFL7
ECFL8
ECFL10
ECFL12
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
D
DIA.
W
T
BALL
WIDTH WIDTH DIA.
A
LGTH
N
THD.
+.010
-.010
+.005
-.005
REF.
REF.
+.015
-.015
UNF
2B
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.437
.500
.562
.625
.750
.875
.234
.250
.312
.359
.406
.453
.484
.593
.437
.500
.625
.719
.812
.937
1.125
1.312
1.062
1.312
1.375
1.625
1.812
2.125
2.500
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
BALL
BODY
ALLOY STEEL
HEAT TREATED
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
C
LGTH
E
DIA.
F
FLAT
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
.500
.687
.687
.812
.937
1.062
1.375
1.562
.406
.468
.500
.687
.750
.875
1.000
1.125
.312
.375
.437
.562
.625
.750
.875
1.000
20
27
22
22
21
20
26
24
2,100
3,250
3,934
5,100
6,420
9,100
9,800
14,250
.04
.05
.08
.13
.18
.29
.43
.65
NOTES: FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: ECF6Z
5
CM-T / CF-T
2-PIECE, SELF-LUBRICATING
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
LINER
*TEFLON FABRIC
MALE ROD
ENDS
B
DIA.
D
DIA.
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.0025
-.0005
+.010
-.010
+.005
-.005
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.437
.500
.562
.625
.750
.875
CM3T
CM4T
CM5T
CM6T
CM7T
CM8T
CM10T
CM12T
CML3T
CML4T
CML5T
CML6T
CML7T
CML8T
CML10T
CML12T
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
REF.
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
.234
.250
.312
.359
.406
.453
.484
.593
.437
.500
.625
.719
.812
.937
1.125
1.312
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
.750
1.000
1.250
1.250
1.375
1.500
1.625
1.750
20
27
22
22
21
20
26
24
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
902
1,809
2,984
4,244
5,312
7,211
8,403
12,321
.03
.04
.07
.11
.15
.24
.36
.57
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
LINER
*TEFLON FABRIC
FEMALE ROD
ENDS
B
DIA.
RIGHT
LEFT
HAND
HAND
+.0025
CF3T
CF4T
CF5T
CF6T
CF7T
CF8T
CF10T
CF12T
CFL3T
CFL4T
CFL5T
CFL6T
CFL7T
CFL8T
CFL10T
CFL12T
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
D
DIA.
W
T
BALL
WIDTH WIDTH DIA.
N
THD.
+.010
-.010
+.005
-.005
REF.
REF.
+.015
-.015
UNF
2B
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.437
.500
.562
.625
.750
.875
.234
.250
.312
.359
.406
.453
.484
.593
.437
.500
.625
.719
.812
.937
1.125
1.312
1.062
1.312
1.375
1.625
1.812
2.125
2.500
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
* A TRADE MARK OF E.I. DUPONT DE NEMOURS & CO., INC.
6
A
LGTH
C
LGTH
E
DIA.
F
FLAT
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
.500
.687
.687
.812
.937
1.062
1.375
1.562
.406
.468
.500
.687
.750
.875
1.000
1.125
.312
.375
.437
.562
.625
.750
.875
1.000
20
27
22
22
21
20
26
24
1,637
2,612
3,110
4,206
5,384
7,826
8,343
12,342
.04
.05
.08
.13
.18
.29
.43
.65
NOTES: FOR STUD ADD “Y” TO SUFFIX. EXAMPLE: CM10TY
SCM-T / SCF-T
2-PIECE, STAINLESS STEEL, SELF-LUBRICATING
MATERIALS
BALL
BODY
440C STAINLESS STEEL
HEAT TREATED
303 STAINLESS STEEL
PASSIVATED
LINER
*TEFLON FABRIC
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.0025
-.0005
+.010
-.010
+.005
-.005
REF.
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
SCM3T
SCM4T
SCM5T
SCM6T
SCM7T
SCM8T
SCM10T
SCM12T
SCML3T
SCML4T
SCML5T
SCML6T
SCML7T
SCML8T
SCML10T
SCML12T
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.437
.500
.562
.625
.750
.875
.234
.250
.312
.359
.406
.453
.484
.593
.437
.500
.625
.719
.812
.937
1.125
1.312
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
.750
1.000
1.250
1.250
1.375
1.500
1.625
1.750
20
27
22
22
21
20
26
24
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
912
1,370
2,050
3,040
3,780
4,700
5,860
7,512
.03
.04
.07
.11
.15
.24
.36
.57
MATERIALS
BALL
BODY
HEAT TREATED
303 STAINLESS STEEL
PASSIVATED
LINER
*TEFLON FABRIC
FEMALE ROD
ENDS
B
DIA.
D
DIA.
W
T
BALL
A
WIDTH WIDTH DIA. LGTH
N
THD.
RIGHT
LEFT
HAND
HAND
+.0025
+.010
-.010
+.005
-.005
REF.
REF.
+.015
-.015
UNF
2B
SCF3T SCFL3T
SCF4T SCFL4T
SCF5T SCFL5T
SCF6T SCFL6T
SCF7T SCFL7T
SCF8T SCFL8T
SCF10T SCFL10T
SCF12T SCFL12T
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.437
.500
.562
.625
.750
.875
.234
.250
.312
.359
.406
.453
.484
.593
.437
.500
.625
.719
.812
.937
1.125
1.312
1.062
1.312
1.375
1.625
1.812
2.125
2.500
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
C
LGTH
E
DIA.
F
FLAT
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
.500
.687
.687
.812
.937
1.062
1.375
1.562
.406
.468
.500
.687
.750
.875
1.000
1.125
.312
.375
.437
.562
.625
.750
.875
1.000
20
27
22
22
21
20
26
24
930
1,380
2,100
3,080
3,790
4,720
5,870
7,520
.04
.05
.08
.13
.18
.29
.43
.65
7
CM-M / CF-M
2-PIECE METRIC, METAL TO METAL
MATERIALS
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
BALL
WIDTH WIDTH DIA.
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.065
-.012
+.038
-.038
+.12
-.12
REF.
REF.
+.40
-.40
THREAD
+1.00
-1.00
REF.
CM3M*
CM5M*
CM6M*
CM8M*
CM10M
CM12M
CM14M
CM16M
CM18M
CM20M
CML3M*
CML5M*
CML6M*
CML8M*
CML10M
CML12M
CML14M
CML16M
CML18M
CML20M
3
5
6
8
10
12
14
16
18
20
12.5
16
19
22.25
27
30
34.75
38
42
46
6
8
9
12
14
16
19
21
23
25
4.25
5.75
6.25
8.0
9.5
10.75
12.25
12.75
14.75
16.25
7.93
11.10
12.70
15.88
19.05
22.23
25.40
28.58
31.75
34.93
27
33
36
42
48
54
60
66
72
78
M3 X 0.5
M5 X 0.8
M6 X 1.0
M8 X 1.25
M10 X 1.5
M12 X 1.75
M14 X 2.0
M16 X 2.0
M18 X 1.5
M20 X 1.5
15
20
22
25
29
33
36
40
44
47
23
22
23
28
26
27
30
33
30
29
ULT.
STATIC
RADIAL
LOAD
Newtons
APPROX.
WEIGHT
(GRAMS)
1,775
5,168
7,296
13,591
21,024
25,819
35,214
37,391
47,903
57,101
7
12
18
31
68
78
118
173
260
290
MATERIALS
FEMALE ROD
ENDS
B
DIA.
D
W
T
BALL
A
DIA. WIDTH WIDTH DIA. LGTH
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.065
-.012
+.38
-.38
+.12
-.12
REF.
REF.
3
5
6
8
10
12
14
16
18
20
12.5
16
19
22.25
27
30
34.75
38
42
46
6
8
9
12
14
16
19
21
23
25
4.25
5.75
6.25
8.0
9.5
10.75
12.25
12.75
14.75
16.25
7.93
11.10
12.70
15.88
19.05
22.23
25.40
28.58
31.75
34.93
CF3M*
CF5M*
CF6M
CF8M
CF10M
CF12M
CF14M
CF16M
CF18M
CF20M
CFL3M*
CFL5M*
CFL6M
CFL8M
CFL10M
CFL12M
CFL14M
CFL16M
CFL18M
CFL20M
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
N
THD.
C
LGTH
E
DIA.
F
FLAT
+.40
-.40
THREAD
+1.00
-1.00
+.25
-.25
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(grams)
+.25
REF.
-.25
Newtons
21
27
30
36
43
50
57
64
71
77
M3 X 0.5
M5 X 0.8
M6 X 1.0
M8 X 1.25
M10 X 1.5
M12 X 1.75
M14 X 2.0
M16 X 2.0
M18 X 1.5
M20 X 1.5
10
14
14
17
21
24
27
33
36
40
8
11
13
16
19
22
25
27
28.58
30.15
7
9
11
14
17
19
22
22
25.4
27
23
22
23
28
26
27
30
33
30
29
5,746
8,247
11,895
15,190
22,750
25,819
35,214
37,391
47,903
57,101
10
18
25
40
80
95
160
215
300
350
NOTES: FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: CF6MZ
8
SCM-MT / SCF-MT
2-PIECE METRIC, STAINLESS STEEL, SELF-LUBRICATING
MATERIALS
BALL
BODY
HEAT TREATED
303 STAINLESS STEEL
PASSIVATED
LINER
*TEFLON FABRIC
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.065
-.012
+.38
-.38
+.12
-.12
REF.
REF.
+.40
-.40
THREAD
+1.00
-.1.00
REF.
SCM5MT
SCM6MT
SCM8MT
SCM10M
SCM12MT
SCM14MT
SCM16MT
SCML5MT
SCML6MT
SCML8MT
SCML10MT
SCML12MT
SCML14MT
SCML16MT
5
6
8
10
12
14
16
16
19
22.25
27
30
34.75
38
8
9
12
14
16
19
21
5.75
6.25
8.0
9.5
10.75
12.25
12.75
11.10
12.70
15.88
19.05
22.23
25.40
28.58
33
36
42
48
54
60
66
M5 X 0.8
M6 X 1.0
M8 X 1.25
M10 X 1.5
M12 X 1.75
M14 X 2.0
M16 X 2.0
20
22
25
29
33
36
40
22
23
28
26
27
30
33
ULT.
STATIC APPROX.
RADIAL WEIGHT
LOAD
(grams)
Newtons
4,056
6,093
9,118
14,144
17,373
23,699
25,162
12
18
31
68
78
118
173
MATERIALS
BALL
BODY
HEAT TREATED
303 STAINLESS STEEL
PASSIVATED
LINER
*TEFLON FABRIC
FEMALE ROD
ENDS
B
DIA.
D
W
T
BALL
A
N
THD.
C
E
F
LGTH DIA. FLAT
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD (grams)
+1.00 +.25 +.25
REF.
-1.00 -.25
-.25
Newtons
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.065
-.012
+.38
-.38
+.12
-.12
REF.
REF.
+.40
-.40
THREAD
SCF5MT
SCF6MT
SCF8MT
SCF10MT
SCF12MT
SCF14MT
SCFL5MT
SCFL6MT
SCFL8MT
SCFL10MT
SCFL12MT
SCFL14MT
5
6
8
10
12
14
16
19
22.25
27
30
34.75
8
9
12
14
16
19
5.75
6.25
8.0
9.5
10.75
12.25
11.10
12.70
15.88
19.05
22.23
25.40
27
30
36
43
50
57
M5 X 0.8
M6 X 1.0
M8 X 1.25
M10 X 1.5
M12 X 1.75
M14 X 2.0
14
14
17
21
24
27
11
13
16
19
22
25
9
11
14
17
19
22
22
23
28
26
27
30
4,136
6,138
9,340
15,310
17,373
23,699
18
25
40
80
95
160
SCF16MT
SCFL16MT
16
38
21
12.75
28.58
64
M16 X 2.0
33
27
22
33
25,162
215
9
CM-Y / CF-Y
2-PIECE, METAL TO METAL WITH STUDS, PTFE LINERS AVAILABLE
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
STUD
LOW CARBON STEEL, ZINC PLATED
MALE ROD
ENDS
D
DIA.
L
LGTH
S
LGTH
P
LGTH
T
WIDTH
A
LGTH
N
THD.
C
LGTH
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.010
-.010
+.015
-.015
MIN.
REF.
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
1.016
1.031
1.219
1.562
1.750
2.000
2.500
3.000
.437
.500
.593
.812
.937
1.000
1.375
1.625
.500
.562
.687
.906
1.062
1.125
1.500
1.812
.234
.250
.312
.359
.406
.453
.484
.593
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
.750
1.000
1.250
1.250
1.375
1.500
1.625
1.750
45
40
42
46
44
48
52
46
CM3Y*
CM4Y*
CM5Y*
CM6Y
CM7Y
CM8Y
CM10Y
CM12Y
CML3Y*
CML4Y*
CML5Y*
CML6Y
CML7Y
CML8Y
CML10Y
CML12Y
a°
MIS.
ANGLE
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
CONSULT
F.K.
ENG.
DEPT.
.04
.05
.10
.15
.24
.35
.61
1.03
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
STUD
LOW CARBON STEEL, ZINC PLATED
FEMALE ROD
ENDS
D
DIA.
RIGHT
LEFT
HAND
HAND
+.010
CF3Y*
CF4-3Y
CF4Y
CF5Y
CF6Y
CF7Y
CF8Y
CF10Y
CF12Y
CFL3Y*
N/A
CFL4Y
CFL5Y
CFL6Y
CFL7Y
CFL8Y
CFL10Y
CFL12Y
.625
.750
.750
.875
1.000
1.125
1.312
1.500
1.750
L
S
LGTH LGTH
P
T
A
LGTH WIDTH LGTH
N
THD.
a°
ULT.
MIS.
STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF
-.031 -.010 -.010
(lbs.)
+.015
-.015
MIN.
REF.
REF.
+.015
-.015
UNF
3A-2B
1.016
1.031
1.031
1.219
1.562
1.750
2.000
2.500
3.000
.437
.500
.500
.593
.812
.937
1.000
1.375
1.625
.500
.562
.562
.687
.906
1.062
1.125
1.500
1.812
.234
.250
.250
.312
.359
.406
.453
.484
.593
1.062
1.312
1.312
1.375
1.625
1.812
2.125
2.500
2.875
10-32
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
C
LGTH
E
DIA.
F
FLAT
.500
.687
.687
.687
.812
.937
1.062
1.375
1.562
.406
.468
.468
.500
.687
.750
.875
1.000
1.125
.312
.375
.375
.437
.562
.625
.750
.875
1.000
45
40
40
42
46
44
48
52
46
CONSULT
F.K.
ENG.
DEPT.
.05
.06
.06
.11
.17
.27
.40
.68
1.11
NOTES: FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: CF6YZ
FOR RIGHT HAND STUD ADD "Y" TO SUFFIX. EXAMPLE: CM10Y
FOR LEFT HAND STUD ADD "YL" TO SUFFIX. EXAMPLE: CM10YL
FOR HEAT TREATED STUD ADD "YX" TO SUFFIX. EXAMPLE: CM10YX
10
CM SPECIAL
2-PIECE, METAL TO METAL, SPECIAL BORE SIZES / PTFE LINERS AVAILABLE
MATERIALS
BALL
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
BODY
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.0025
-.0005
+.010
-.010
+.005
-.005
REF.
REF.
+.015
-.015
UNF
3A
+.062
-.031
ULT.
STATIC
RADIAL
LOAD
(lbs.)
CM4-3
CM5-4
CM6-5
HCM6
CM8-6
HCM8
CM10-8
CM12-8
CM12-10
CM10-12Z
HCM12
CM12-757
CML4-3
CML5-4
CML6-5
HCML6
CML8-6
HCML8
CML10-8
CML12-8
CML12-10
CML10-12Z
HCML12
CML12-757
.1900
.2500
.3125
.3750
.3750
.5000
.5000
.5000
.6250
.6250
.7500
.7570
.750
.875
1.000
1.000
1.312
1.312
1.500
1.750
1.750
1.750
1.750
1.750
.375
.437
.500
.750
.625
1.156
.750
.875
.875
.875
1.125
.875
.250
.312
.359
.359
.453
.453
.484
.593
.593
.593
.593
.593
.500
.625
.719
.719
.937
.937
1.125
1.312
1.312
1.312
1.312
1.312
1.562
1.875
1.938
1.938
2.438
2.438
2.625
2.875
2.875
2.875
2.875
2.875
1/4-28
5/16-24
3/8-24
3/8-24
1/2-20
1/2-20
5/8-18
3/4-16
3/4-16
5/8-18
3/4-16
3/4-16
1.000
1.250
1.250
1.250
1.500
1.500
1.625
1.750
1.750
1.750
1.750
1.750
2,225
3,600
5,100
5,100
8,386
8,386
9,813
14,290
14,290
*
14,290
14,290
APPROX.
WEIGHT
(lbs.)
.042
.074
.108
.110
.246
.256
.380
.626
.596
.532
.582
.560
* CONSULT F.K. ENGINEERING DEPARTMENT.
11
NJM / NJF
3-PIECE, PRECISION - WEAR RESISTANT, PLASTIC RACE ROD ENDS
MATERIALS
BALL
BODY
LOW CARBON STEEL
CASE HARDENED
ZINC PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
RACE
TEFLON LUBRICATED, FIBER REINFORCED
ENGINEERING PLASTIC
MALE ROD
ENDS
B
DIA.
D
DIA.
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.0025
-.0005
+.010
-.010
+.005
-.005
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.437
.500
.562
.625
.750
.875
NJM3
NJM4
NJM5
NJM6
NJM7
NJM8
NJM10
NJM12
NJML3
NJML4
NJML5
NJML6
NJML7
NJML8
NJML10
NJML12
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
+.015
-.015
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
.250
.281
.344
.406
.437
.500
.562
.687
.437
.500
.625
.719
.812
.937
1.125
1.312
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
.750
1.000
1.250
1.250
1.375
1.500
1.625
1.750
13
16
14
12
14
12
16
14
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
1,174
2,168
2,796
4,012
4,244
6,453
7,400
10,937
.03
.04
.07
.11
.16
.25
.38
.60
MATERIALS
BALL
BODY
LOW CARBON STEEL
CASE HARDENED
ZINC PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
RACE
TEFLON LUBRICATED, FIBER REINFORCED
ENGINEERING PLASTIC
FEMALE ROD
ENDS
B
DIA.
RIGHT
LEFT
HAND
HAND
+.0025
D
DIA.
W
T
BALL
WIDTH WIDTH DIA.
A
LGTH
N
THD.
+.010
-.010
+.005
-.005
+.015
-.015
REF.
+.015
-.015
UNF
2B
C
LGTH
E
DIA.
F
FLAT
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
NJF3
NJF4
NJF5
NJF6
NJF7
NJF8
NJF10
NJFL3
NJFL4
NJFL5
NJFL6
NJFL7
NJFL8
NJFL10
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.625
.750
.875
1.000
1.125
1.312
1.500
.312
.375
.437
.500
.562
.625
.750
.250
.281
.344
.406
.437
.500
.562
.437
.500
.625
.719
.812
.937
1.125
1.062
1.312
1.375
1.625
1.812
2.125
2.500
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
.500
.687
.687
.812
.937
1.062
1.375
.406
.469
.500
.687
.750
.875
1.000
.312
.375
.437
.562
.625
.750
.875
13
16
14
12
14
12
16
1,220
2,500
2,753
3,950
4,300
6,453
7,400
.04
.06
.09
.15
.20
.33
.48
NJF12
NJFL12
.7500
1.750
.875
.687
1.312
2.875
3/4-16
1.562
1.125
1.000
14
10,937
.72
NOTES: FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: NJM6Y
12
M-SB / F-SB
3-PIECE, COMMERCIAL, SINTERED BRONZE
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
RACE
SINTERED PHOSPHOR BRONZE
OIL IMPREGNATED
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.0025
-.0005
+.010
-.010
+.005
-.005
M3SB
ML3SB
M4SB
ML4SB
M5SB
ML5SB
M6SB
ML6SB
M7SB
ML7SB
M8SB
ML8SB
M10SB ML10SB
M12SB ML12SB
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.437
.500
.562
.625
.750
.875
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
+.015
-.015
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
.250
.281
.344
.406
.437
.500
.562
.687
.437
.500
.625
.719
.812
.937
1.125
1.312
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
.750
1.000
1.250
1.250
1.375
1.500
1.625
1.750
13
16
14
12
14
12
16
14
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
1,174
2,168
2,796
4,012
4,244
6,700
7,400
11,550
.03
.04
.07
.11
.16
.25
.38
.60
MALE ROD END LOAD RATINGS BASED ON NO LUBRICATING
FITTING. FOR LOAD RATINGS WITH LUBRICATOR, PLEASE CONTACT THE F.K. ENGINEERING DEPARTMENT.
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
RACE
SINTERED PHOSPHOR BRONZE
OIL IMPREGNATED
FEMALE ROD
ENDS
B
DIA.
RIGHT
LEFT
HAND
HAND
+.0025
F3SB
F4SB
F5SB
F6SB
F7SB
F8SB
F10SB
F12SB
FL3SB
FL4SB
FL5SB
FL6SB
FL7SB
FL8SB
FL10SB
FL12SB
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
D
DIA.
W
T
BALL
WIDTH WIDTH DIA.
A
LGTH
N
THD.
+.010
-.010
+.005
-.005
+.015
-.015
REF.
+.015
-.015
UNF
2B
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
.312
.375
.437
.500
.562
.625
.750
.875
.250
.281
.344
.406
.437
.500
.562
.687
.437
.500
.625
.719
.812
.937
1.125
1.312
1.062
1.312
1.375
1.625
1.812
2.125
2.500
2.875
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
C
LGTH
E
DIA.
F
FLAT
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
.500
.687
.687
.812
.937
1.062
1.375
1.562
.406
.468
.500
.687
.750
.875
1.000
1.125
.312
.375
.437
.562
.625
.750
.875
1.000
13
16
14
12
14
12
16
14
1,624
2,545
3,200
3,950
4,300
6,700
7,400
11,550
.04
.06
.09
.15
.20
.33
.48
.72
NOTES: FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: M6SBZ
FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: FL12SBY
13
JM / JML
3-PIECE, PRECISION-WEAR RESISTANT / PTFE LINERS AVAILABLE
MALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
JM2*
JML2*
JM3
JML3
JM4
JML4
JM5
JML5
JM6
JML6
JM7
JML7
JM8
JML8
JM10
JML10
JM12
JML12
JM16**
JML16
JM16-1** JML16-1**
JM16-2** JML16-2**
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
+.0025
-.0005
+.010
-.010
+.005
-.005
.1250
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
1.0000
1.0000
1.0000
.500
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
2.950
2.950
2.950
.250
.312
.375
.437
.500
.562
.625
.750
.875
1.375
1.375
1.375
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
+.015
-.015
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
.187
.250
.281
.344
.406
.437
.500
.562
.687
1.015
1.015
1.015
.312
.437
.500
.625
.719
.812
.937
1.125
1.312
1.875
1.875
1.875
.937
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.875
4.125
4.125
4.125
6-32 UNC
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
1-1/4-12
1-14
1-12
.562
.750
1.000
1.250
1.250
1.375
1.500
1.625
1.750
2.125
2.125
2.125
16
13
16
14
12
14
12
16
14
17
17
17
MALE ROD END LOAD RATINGS BASED ON NO LUBRICATION FITTING.
FOR LOAD RATINGS OF ROD ENDS WITH LUBRICATOR,
PLEASE CONTACT THE F.K. ENGINEERING DEPARTMENT
.
*GREASE FITTINGS & PTFE LINERS NOT AVAILABLE.
** TOLERANCE VARIATION: "D", "A" ARE +/- .020
MATERIALS
BALL
BODY
NOTES:
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: JM6Z
RACE
STEEL ALLOY, HEAT TREATED
ZINC PLATED, CHROMATE TREATED
14
FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: JM5Y
FOR TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: JM12T
ULT.
STATIC APPROX.
RADIAL WEIGHT
LOAD
(lbs.)
(lbs.)
500
1,174
2,168
2,796
4,012
4,244
6,700
7,400
11,550
43,555
43,555
43,555
.013
.03
.04
.07
.11
.16
.25
.38
.60
2.406
2.127
2.127
JF / JFL
3-PIECE, PRECISION-WEAR RESISTANT / PTFE LINERS AVAILABLE
FEMALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
B
DIA.
D
W
T
BALL
A
+.0015 +.010 +.000 +.015
-.0005 -.010 -.005 -.015
REF.
+.015
-.015
N
THD.
UNF
2B
C
E
LGTH DIA.
F
FLAT
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
JF2*
JF3
JF4
JF5
JF6
JF7
JF8
JF10
JF12
JF16**
JF16-1**
JFL2*
1250
.500
JFL3
.1900
.625
JFL4
.2500
.750
JFL5
.3125
.875
JFL6
.3750 1.000
JFL7
.4375 1.125
JFL8
.5000 1.312
JFL10
.6250 1.500
JFL12
.7500 1.750
JFL16** 1.0000 2.750
JFL16-1** 1.0000 2.750
.250
.312
.375
.437
.500
.562
.625
.750
.875
1.375
1.375
.187
.250
.281
.344
.406
.437
.500
.562
.687
1.000
1.000
.312
.437
.500
.625
.719
.812
.937
1.125
1.312
1.875
1.875
.812 6-32UNC
1.062
10-32
1.312
1/4-28
1.375 5/16-24
1.625
3/8-24
1.812 7/16-20
2.125
1/2-20
2.500
5/8-18
2.875
3/4-16
4.125 1-1/4-12
4.125
1-14
.437
.500
.687
.687
.812
.937
1.062
1.375
1.562
2.125
2.125
.312 .250
.406 .312
.469 .375
.500 .437
.687 .562
.750 .625
.875 .750
1.000 .875
1.125 1.000
1.625 1.500
1.625 1.500
16
13
16
14
12
14
12
16
14
17
17
1,210
1,624
2,545
3,200
3,950
4,300
6,700
7,400
11,550
40,893
43,555
.019
.04
.06
.09
.15
.20
.33
.48
.72
2.125
2.410
JF16-2**
JFL16-2** 1.0000 2.750
1.375
1.000
1.875
4.125
2.125 1.625 1.500
17
43,555
2.410
1-12
*GREASE FITTINGS & PTFE LINERS NOT AVAILABLE.
MATERIALS
BALL
BODY
NOTES:
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: JF6Z
FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: JF5Y
FOR TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: JF12T
RACE
15
JMX / JMXL
3-PIECE, PRECISION - HIGH STRENGTH ALLOY / PTFE LINERS AVAILABLE
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.0015
-.0005
+.010
-.010
+.000
-.005
+.005
-.005
REF.
+.015
-.015
UNF
3A
JMX3
JMX4
JMX5
JMX6
JMX7
JMX8
JMX10
JMX12
JMX14
JMX14T-770
JMX16**
JMX16-1**
JMXL3
JMXL4
JMXL5
JMXL6
JMXL7
JMXL8
JMXL10
JMXL12
JMXL14
JMXL14T-770
JMXL16
JMXL16-1
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.8750
.8750
1.0000
1.0000
.625
.750
.875
1.000
1.125
1.312
1.500
1.750
2.000
2.000
2.950
2.950
.312
.375
.437
.500
.562
.625
.750
.875
.875
.875
1.375
1.375
.250
.281
.344
.406
.437
.500
.562
.687
.687
.770
1.015
1.015
.437
.500
.625
.719
.812
.937
1.125
1.312
1.312
1.375
1.875
1.875
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.875
3.375
3.375
4.500
4.500
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
7/8-14
7/8-14
1-1/4-12
1-14
C
LGTH
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062
REF.
-.031
(lbs.)
.750
1.000
1.250
1.250
1.375
1.500
1.625
1.750
1.875
1.875
2.500
2.500
13
16
14
12
14
12
16
14
12
12
17
17
PLEASE CONTACT THE F.K. ENGINEERING DEPARTMENT.
MATERIALS
BALL
BODY
NOTES:
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
STEEL ALLOY, HEAT
TREATED, ZINC PLATED
CHROMATE TREATED
FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: JMX6Z
RACE
16
FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: JMX5Y
FOR TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: JMX12T
2,855
5,262
7,640
9,550
10,290
16,242
17,959
28,090
55,690
45,051
107,182
107,182
.03
.04
.07
.11
.16
.25
.38
.60
.91
.91
2.736
2.464
JFX / JFXL
3-PIECE, PRECISION - HIGH STRENGTH ALLOY / PTFE LINERS AVAILABLE
FEMALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
B
DIA.
D
W
T
BALL
A
+.0015 +.010 +.000 +.005
-.0005 -.010 -.005 -.005
N
THD.
REF.
+.015
-.015
UNF
2B
C
E
LGTH DIA.
F
FLAT
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
JFX3
JFXL3
.1900
.625
JFX4
JFXL4
.2500
.750
JFX5
JFXL5
.3125
.875
JFX6
JFXL6
.3750 1.000
JFX7
JFXL7
.4375 1.125
JFX8
JFXL8
.5000 1.312
JFX10
JFXL10
.6250 1.500
JFX12
JFXL12
.7500 1.750
JFX16** JFXL16** 1.0000 2.750
JFX16-1** JFXL16-1** 1.0000 2.750
.312
.375
.437
.500
.562
.625
.750
.875
1.375
1.375
.250
.281
.344
.406
.437
.500
.562
.687
1.000
1.000
.437
.500
.625
.719
.812
.937
1.125
1.312
1.875
1.875
1.062
1.312
1.375
1.625
1.812
2.125
2.500
2.875
4.125
4.125
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
1-1/4-12
1-14
.500
.687
.687
.812
.937
1.062
1.375
1.562
2.125
2.125
.406 .312
.469 .375
.500 .437
.687 .562
.750 .625
.875 .750
1.000 .875
1.125 1.000
1.625 1.500
1.625 1.500
13
16
14
12
14
12
16
14
17
17
3,736
6,195
7,640
9,550
10,290
15,340
17,959
28,090
76,205
76,205
.04
.06
.09
.15
.20
.33
.48
.72
2.125
2.125
JFX24-1*
1.312
1.125
1.125
5.375
1 1/2-12
2.625 2.250 2.000
6.0
138,800
6.500
JFXL24-1*
1.5000 3.500
* SOME DIMENSIONS HAVE GREATER TOLERANCE VARIATIONS.
MATERIALS
BALL
BODY
NOTES:
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
STEEL ALLOY, HEAT
CHROMATE TREATED
FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: JFX6Z
FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: JFX5Y
FOR TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: JFX12T
RACE
17
RSM / RSM-T
3-PIECE, EXTRA STRENGTH - HEAVY DUTY SHANK / PTFE LINERS AVAILABLE
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
RACE
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.0015
-.0005
+.010
-.010
+.000
-.005
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
+.005
-.005
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
RSM3
RSM4
RSM5
RSM6
RSM7
RSM8
RSML3
RSML4
RSML5
RSML6
RSML7
RSML8
.1900
.2500
.3125
.3750
.4375
.5000
.750
.875
1.000
1.125
1.312
1.500
.312
.375
.437
.500
.562
.625
.250
.281
.344
.406
.437
.500
.437
.500
.625
.719
.812
.937
1.562
1.875
1.938
2.125
2.438
2.625
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
1.000
1.250
1.250
1.375
1.500
1.625
10
13
12
10
12
10
2,170
3,523
5,370
7,230
9,685
12,843
.043
.072
.112
.160
.249
.382
RSM10
RSML10
.6250
1.750
.750
.562
1.125
2.875
3/4-16
1.750
13
16,613
.602
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED
RACE
LINER
STEEL ALLOY, HEAT TREATED *TEFLON FABRIC
ZINC PLATED
CHROMATE TREATED
MALE ROD
ENDS
B
DIA.
D
DIA.
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.0015
-.0005
+.010
-.010
+.000
-.005
.1900
.2500
.3125
.3750
.4375
.5000
.750
.875
1.000
1.125
1.312
1.500
.6250
1.750
RSM3T
RSM4T
RSM5T
RSM6T
RSM7T
RSM8T
RSML3T
RSML4T
RSML5T
RSML6T
RSML7T
RSML8T
RSM10T RSML10T
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
+.005
-.005
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
.312
.375
.437
.500
.562
.625
.250
.281
.344
.406
.437
.500
.437
.500
.625
.719
.812
.937
1.562
1.875
1.938
2.125
2.438
2.625
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
1.000
1.250
1.250
1.375
1.500
1.625
.750
.562
1.125
2.875
3/4-16
1.750
18
a°
MIS.
ANGLE
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
10
13
12
10
12
10
2,170
3,523
5,370
7,230
9,685
12,843
.043
.072
.112
.160
.249
.382
13
16,613
.602
NOTES: FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: RSML6Z
RSMX / RSMX-T
3-PIECE, HIGH STRENGTH ALLOY - HEAVY DUTY SHANK / PTFE LINERS AVAILABLE
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS ZINC PLATED
HARD CHROME PLATED CHROMATE TREATED
RACE
MALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
B
DIA.
D
DIA.
+.0015
-.0005
+.010
-.010
+.000
-.005
.1900
.2500
.3125
.3750
.4375
.5000
.5000
.6250
.7500
.750
.875
1.000
1.125
1.312
1.500
1.750
1.750
2.000
.312
.375
.437
.500
.562
.625
.750
.750
.875
RSMX3
RSMXL3
RSMX4
RSMXL4
RSMX5
RSMXL5
RSMX6
RSMXL6
RSMX7
RSMXL7
RSMX8
RSMXL8
RSMX10-8 RSMXL10-8
RSMX10
RSMXL10
RSMX12
RSMXL12
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
+.005
-.005
REF.
+.015
-.015
UNF
3A
+.062
-.031
.250
.281
.344
.406
.437
.500
.562
.562
.687
.437
.500
.625
.719
.812
.937
1.125
1.125
1.312
1.562
1.875
1.938
2.125
2.438
2.625
2.875
2.875
3.375
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
3/4-16
7/8-14
1.000
1.250
1.250
1.375
1.500
1.625
1.750
1.750
1.875
a°
ULT.
MIS.
STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
10
13
12
10
12
10
13
13
12
5,270
8,471
13,012
17,610
23,470
31,420
40,590
40,590
55,696
.043
.072
.112
.160
.249
.382
.602
.602
.918
MATERIALS
BALL
BODY
52100 STEEL
RACE
LINER
STEEL ALLOY, HEAT
*TEFLON FABRIC
CHROMATE TREATED
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.0015
-.0005
+.010
-.010
+.000
-.005
+.005
-.005
REF.
+.015
-.015
UNF
3A
+.062
-.031
RSMX3T
RSMX4T
RSMX5T
RSMX6T
RSMX7T
RSMX8T
RSMX10-8T
RSMX10T
RSMX12T
RSMX14T**
RSMXL3T
RSMXL4T
RSMXL5T
RSMXL6T
RSMXL7T
RSMXL8T
RSMXL10-8T
RSMXL10T
RSMXL12T
RSMXL14T**
.1900
.2500
.3125
.3750
.4375
.5000
.5000
.6250
.7500
.8750
.750
.875
1.000
1.125
1.312
1.500
1.750
1.750
2.000
2.312
.312
.375
.437
.500
.562
.625
.750
.750
.875
.875
.250
.281
.344
.406
.437
.500
.562
.562
.687
.765
.437
.500
.625
.719
.812
.937
1.125
1.125
1.312
1.375
1.562
1.875
1.938
2.125
2.438
2.625
2.875
2.875
3.375
3.800
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
3/4-16
7/8-14
1-14
1.000
1.250
1.250
1.375
1.500
1.625
1.750
1.750
1.875
2.375
a°
ULT.
MIS.
STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
10
13
12
10
12
10
13
13
12
12
5,270
8,471
13,012
17,610
23,470
31,420
40,590
40,590
55,696
63,096
.043
.072
.112
.160
.249
.382
.602
.602
.918
1.302
MALE ROD END LOAD RATINGS BASED ON NO LUBRICATION
** RACE IS 17-4PH STAINLESS STEEL, HEAT TREATED / BALL IS 440C STAINLESS
FITTING. FOR LOAD RATINGS OF ROD ENDS WITH LUBRICATOR,
STEEL OR 52100 STEEL (HEAT TREATED) - MANUFACTURE’S OPTION
NOTES: FOR GREASE FITTINGS ADD "Z" TO SUFFIX.
EXAMPLE: RSMXL5Z
19
CMX / CMX-T
2-PIECE, METAL TO METAL, HEAT TREATED, ALLOY STEEL / PTFE LINERS AVAILABLE
MATERIALS
BALL
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
BODY
ALLOY STEEL
HEAT TREATED
BLACK OXIDE COATED
MALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
CMX8
CMXL8
CMX10-8 CMXL10-8
CMX10
CMXL10
CMX12-8 CMXL12-8
CMX12-10 CMXL12-10
CMX12
CMXL12
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
+.0025
-.0005
+.010
-.010
+.005
-.005
.5000
.5000
.6250
.5000
.6250
.7500
1.312
1.500
1.500
1.750
1.750
1.750
.625
.750
.750
.875
.875
.875
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
REF.
REF.
+.015
-.015
UNF
3A
+.062
-.031
.453
.484
.484
.593
.593
.593
.937
1.125
1.125
1.312
1.312
1.312
2.438
2.625
2.625
2.875
2.875
2.875
1/2-20
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
1.500
1.625
1.625
1.750
1.750
1.750
a°
ULT.
MIS.
STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
20
26
26
24
24
24
17,000
18,000
18,000
25,000
25,000
25,000
.24
.30
.36
.57
.57
.57
MALE ROD END LOAD RATINGS BASED ON NO LUBRICATION FITTING. FOR
LOAD RATINGS OF ROD ENDS WITH LUBRICATOR, PLEASE CONTACT THE
MATERIALS
BALL
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
BODY
ALLOY STEEL
HEAT TREATED
BLACK OXIDE COATED
LINER
*TEFLON FABRIC
MALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
B
DIA.
D
DIA.
+.0025
-.0005
+.010
-.010
+.005
-.005
1.312
1.500
1.500
1.750
1.750
1.750
.625
.750
.750
.875
.875
.875
CMX8T
CMXL8T
.5000
CMX10-8T CMXL10-8T .5000
CMX10T
CMXL10T .6250
CMX12-8T CMXL12-8T .5000
CMX12-10T CMXL12-10T .6250
CMX12T
CMXL12T .7500
W
T
WIDTH WIDTH
20
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
REF.
REF.
+.015
-.015
UNF
3A
+.062
-.031
.453
.484
.484
.593
.593
.593
.937
1.125
1.125
1.312
1.312
1.312
2.438
2.625
2.625
2.875
2.875
2.875
1/2-20
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
1.500
1.625
1.625
1.750
1.750
1.750
a°
ULT.
MIS.
STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
20
26
26
24
24
24
14,500
15,200
15,200
21,400
21,400
21,400
.24
.30
.36
.57
.57
.57
KMX / KMXL
3-PIECE, ALLOY STEEL, HEAT TREATED - NYLON RACE
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.0025
-.0005
+.010
-.010
+.005
-.005
+.005
-.005
REF.
+.015
-.015
UNF
3A
KMX5
KMX6
KMX8
KMX10-8
KMX10
KMX12-8
KMX12-10
KMX12
KMXL5
KMXL6
KMXL8
KMXL10-8
KMXL10
KMXL12-8
KMXL12-10
KMXL12
.3125
.3750
.5000
.5000
.6250
.5000
.6250
.7500
.875
1.000
1.312
1.500
1.500
1.750
1.750
1.750
.437
.500
.625
.625
.750
.750
.750
.875
.344
.406
.500
.500
.562
.562
.562
.687
.625
.719
.937
.937
1.125
1.125
1.125
1.312
1.875
1.938
2.438
2.625
2.625
2.875
2.875
2.875
5/16-24
3/8-24
1/2-20
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
C
LGTH
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062
REF.
-.031
(lbs.)
1.250
1.250
1.500
1.625
1.625
1.750
1.750
1.750
14
12
12
12
16
14
14
14
7,600
9,500
12,696
19,960
14,480
23,256
23,256
23,192
0.07
0.11
.24
.36
.36
.57
.57
.57
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
ALLOY STEEL
HEAT TREATED
CHROME PLATED
NOTES: FOR STUDS ADD "Y" TO SUFFIX.
EXAMPLE: KMX10Y
RACE
NYLON 10 OR EQUIVALENT
21
RJM / RJF
3-PIECE, PRECISION - CHROME PLATED / PTFE LINERS AVAILABLE
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
DECORATIVE CHROME
PLATED
RACE
STEEL ALLOY
HEAT TREATED
MALE ROD
ENDS
B
DIA.
D
DIA.
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.0015
-.0005
+.010
-.010
+.005
-.005
.2500
.3125
.3750
.750
.875
1.000
.375
.437
.500
RJM4
RJM5
RJM6
RJML4
RJML5
RJML6
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
+.005
-.005
REF.
+.015
-.015
UNF
3A
+.062
-.031
REF.
.281
.344
.406
.500
.625
.719
1.562
1.875
1.938
1/4-28
5/16-24
3/8-24
1.000
1.250
1.250
16
14
12
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
2,168
2,796
4,012
.04
.07
.11
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
LOW CARBON STEEL
DECORATIVE CHROME
PLATED
RACE
STEEL ALLOY
HEAT TREATED
FEMALE ROD
ENDS
B
DIA.
RIGHT
LEFT
HAND
HAND
+.0015
RJF4
RJF5
RJF6
RJFL4
RJFL5
RJFL6
.2500
.3125
.3750
D
DIA.
W
T
BALL
WIDTH WIDTH DIA.
N
THD.
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
+.010
-.010
+.005
-.005
+.005
-.005
REF.
+.015
-.015
UNF
2B
.750
.875
1.000
.375
.437
.500
.281
.344
.406
.500
.625
.719
1.312
1.375
1.625
1/4-28
5/16-24
3/8-24
22
A
LGTH
C
LGTH
E
DIA.
F
FLAT
.687
.687
.812
.468
.500
.687
.375
.437
.562
16
14
12
2,545
3,200
3,950
.06
.09
.15
NOTES: FOR *TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: RJF5T
RJMX-T / RRSMX-T
3-PIECE, HEAVY DUTY / EXTRA HEAVY DUTY WITH PTFE LINER
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS BRIGHT ELECTROLESS NICKEL
HARD CHROME PLATED OR HARD CHROME PLATED
RACE
LINER
STEEL ALLOY
HEAT TREATED
ZINC PLATED
CHROMATE TREATED
*TEFLON FABRIC
RJMX - HEAVY DUTY
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.0015
-.0005
+.010
-.010
+.000
-.005
+.005
-.005
REF.
+.015
-.015
UNF
3A
+.062
-.031
RJMX6T
RJMX7T
RJMX8T
RJMX10T
RJMX12T
RJMXL6T
RJMXL7T
RJMXL8T
RJMXL10T
RJMXL12T
.3750
.4375
.5000
.6250
.7500
1.000
1.125
1.312
1.500
1.750
.500
.562
.625
.750
.875
.406
.437
.500
.562
.687
.719
.812
.937
1.125
1.312
1.938
2.125
2.438
2.625
2.875
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
1.250
1.375
1.500
1.625
1.750
a°
ULT.
MIS.
STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
12
14
12
16
14
9,550
10,290
16,242
17,959
28,090
.112
.160
.249
.382
.602
MATERIALS
BALL
BODY
52100 STEEL
Rc 56 MIN. HARDNESS BRIGHT ELECTROLESS NICKEL
HARD CHROME PLATED OR HARD CHROME PLATED
RRSMX - EXTRA HEAVY DUTY
MALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
RRSMX6T RRSMXL6T
RRSMX7T RRSMXL7T
RRSMX8T RRSMXL8T
RRSMX10T RRSMXL10T
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
+.0015
-.0005
+.010
-.010
+.005
-.005
.3750
.4375
.5000
.6250
1.125
1.312
1.500
1.750
.500
.562
.625
.750
RACE
LINER
STEEL ALLOY
HEAT TREATED
ZINC PLATED
CHROMATE TREATED
*TEFLON FABRIC
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
+.005
-.005
REF.
+.015
-.015
UNF
3A
+.062
-.031
.406
.437
.500
.562
.719
.812
.937
1.125
2.125
2.438
2.625
2.875
7/16-20
1/2-20
5/8-18
3/4-16
1.375
1.500
1.625
1.750
a°
ULT.
MIS.
STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
10
12
10
13
17,610
23,470
31,420
40,590
.160
.249
.382
.602
23
SJM-T / SRSM-T
3-PIECE, PRECISION - STAINLESS STEEL, WEAR RESISTANT, SELF-LUBRICATING
MATERIALS
BALL
BODY
440C CRES
STAINLESS STEEL
HEAT TREATED
17-4PH CRES
STAINLESS STEEL
HEAT TREATED
RACE
LINER
17-4PH CRES
STAINLESS STEEL
HEAT TREATED
*TEFLON FABRIC
SJM-T - STAINLESS STEEL PRECISION
MALE ROD
ENDS
B
DIA.
D
DIA.
RIGHT
LEFT
HAND
HAND
PART NO. PART NO.
+.0000
-.0005
+.010
-.010
+.000
-.002
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.806
.900
1.025
1.150
1.337
1.525
1.775
.437
.437
.500
.562
.625
.750
.875
SJM4T
SJM5T
SJM6T
SJM7T
SJM8T
SJM10T
SJM12T
SJML4T
SJML5T
SJML6T
SJML7T
SJML8T
SJML10T
SJML12T
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
a°
MIS.
ANGLE
+.005
-.005
REF.
+.010
-.010
UNF
3A
+.031
-.031
REF.
.337
.327
.416
.452
.515
.577
.640
.531
.593
.687
.781
.875
1.062
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.875
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
.968
1.187
1.187
1.281
1.468
1.562
1.687
11
11
11
13
11
14
17
ULT.
STATIC
RADIAL
LOAD
(lbs.)
APPROX.
WEIGHT
(lbs.)
4,874
7,196
8,580
12,000
19,520
21,920
29,310
.072
.087
.136
.183
.278
.424
.639
MATERIALS
BALL
BODY
440C CRES
STAINLESS STEEL
HEAT TREATED
17-4PH CRES
STAINLESS STEEL
HEAT TREATED
RACE
LINER
17-4PH CRES
STAINLESS STEEL
HEAT TREATED
*TEFLON FABRIC
SRSM-T - STAINLESS STEEL - EXTRA HEAVY DUTY SHANK
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.0000
-.0005
+.010
-.010
+.000
-.002
+.005
-.005
REF.
+.010
-.010
UNF
3A
+.031
-.031
SRSM6T
SRSM7T
SRSM8T
SRSM10T
SRSML6T
SRSML7T
SRSML8T
SRSML10T
.3750
.4375
.5000
.6250
1.150
1.337
1.525
1.775
.500
.562
.625
.750
.416
.452
.515
.577
.687
.781
.875
1.062
2.125
2.438
2.625
2.875
7/16-20
1/2-20
5/8-18
3/4-16
1.375
1.500
1.625
1.750
24
a°
ULT.
MIS.
STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
11
13
11
14
17,610
23,470
33,172
40,507
.160
.249
.382
.602
SJF-T / SJFL-T
3-PIECE, PRECISION - STAINLESS STEEL, WEAR RESISTANT, SELF-LUBRICATING
FEMALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
SJF4T
SJF5T
SJF6T
SJF7T
SJF8T
SJF10T
SJF12T
SJFL4T
SJFL5T
SJFL6T
SJFL7T
SJFL8T
SJFL10T
SJFL12T
B
DIA.
D
W
T
BALL
A
+.0015 +.010 +.000 +.005
-.0005 -.010 -.005 -.005
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.806
.900
1.025
1.150
1.337
1.525
1.775
.375
.437
.500
.562
.625
.750
.875
.281
.344
.406
.437
.500
.562
.687
N
THD.
REF.
+.015
-.015
UNF
2B
.500
.625
.719
.812
.937
1.125
1.312
1.312
1.375
1.625
1.812
2.125
2.500
2.875
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
C
E
LGTH DIA.
F
FLAT
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
.750 .469 .375
.750 .500 .437
.937 .687 .562
1.062 .750 .625
1.187 .875 .750
1.500 1.000 .875
1.750 1.125 1.000
16
14
12
14
12
16
14
4,795
5,929
7,363
7,934
12,527
13,851
21,664
.059
.092
.152
.198
.329
.477
.723
MATERIALS
BALL
BODY
440C CRES
STAINLESS STEEL
HEAT TREATED
17-4PH CRES
STAINLESS STEEL
HEAT TREATED
RACE
LINER
17-4PH CRES
STAINLESS STEEL
HEAT TREATED
*TEFLON FABRIC
25
HRSMX-T / HIN-T
HIGH MISALIGNMENT SERIES - MALE ROD ENDS AND SPHERICAL BEARINGS - HEAVY DUTY
MALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
HRSMX6T
HRSMX7T
HRSMX8T
HRSMX10T
HRSMX12T
HRSMXL6T
HRSMXL7T
HRSMXL8T
HRSMXL10T
HRSMXL12T
B
DIA.
D
W
T
BALL
DIA. WIDTH WIDTH DIA.
+.0000 +.010
-.0005 -.010
.3750
.4375
.5000
.6250
.7500
1.150
1.337
1.525
1.775
2.025
+.000
-.005
+.005
-.005
REF.
.813
.875
.937
1.200
1.280
.355
.355
.411
.577
.630
.781
.875
1.000
1.250
1.375
A
LGTH
N
THD.
C
LGTH
O
DIA.
+.015
-.015
UNF
3A
+.031
-.031
REF.
1.281
1.468
1.562
1.687
2.000
.512
.618
.730
.856
.970
2.125 7/16-20
2.438 1/2-20
2.625 5/8-18
2.875 3/4-16
3.375 7/8-14
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
22
21
19
19
18
11,789
17,100
23,703
32,100
38,701
.15
.24
.39
.60
.89
MATERIALS
BALL
BODY
52100 STEEL
4340 STEEL, HEAT TREATED
RACE
LINER
STEEL ALLOY
ZINC PLATED
CHROMATE TREATED
*TEFLON FABRIC
BEARING
PART
NO.
HIN6T
HIN7T
HIN8T
HIN10T
HIN12T
26
B
DIA.
D
DIA.
W
WIDTH
T
WIDTH
O
DIA.
BALL
DIA.
F
CHAMFER
ANGLE
a°
MIS.
RADIAL
+.0000
-.0005
+.0000
-.0005
+.000
-.005
+.005
-.005
REF.
REF.
REF.
REF.
.3750
.4375
.5000
.6250
.7500
.9060
1.0000
1.1250
1.3750
1.5625
.813
.875
.937
1.200
1.280
.345
.345
.401
.567
.620
.512
.618
.730
.856
.970
.781
.875
1.000
1.250
1.375
.030
.030
.030
.030
.035
23
22
20
20
18
ULT.
STATIC APPROX.
WEIGHT
LOAD
(lbs.)
(lbs.)
16,983
19,023
25,275
44,652
53,716
.068
.095
.160
.245
.315
HJMX-T / HJMXL-T
HIGH MISALIGNMENT SERIES - MALE ROD ENDS - HEAVY DUTY, SELF-LUBRICATING
MALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
HJMX6T
HJMX7T
HJMX8T
HJMX10T
HJMX12T
HJMXL6T
HJMXL7T
HJMXL8T
HJMXL10T
HJMXL12T
B
DIA.
D
W
T
BALL
+.0000 +.010
-.0005 -.010
.3750
.4375
.5000
.6250
.7500
1.150
1.337
1.525
1.775
2.025
+.000
-.005
+.005
-.005
REF.
.813
.875
.937
1.200
1.280
.355
.355
.411
.577
.630
.781
.875
1.000
1.250
1.375
A
LGTH
N
THD.
C
LGTH
O
DIA.
+.015
-.015
UNF
3A
+.031
-.031
REF.
1.281
1.468
1.562
1.687
2.000
.512
.618
.730
.856
.970
2.125 3/8-24
2.438 7/16-20
2.625 1/2-20
2.875 5/8-18
3.375 3/4-16
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
22
21
19
19
18
11,390
15,716
23,703
28,109
38,701
.12
.23
.33
.57
.82
MATERIALS
BALL
BODY
52100 STEEL
4340 STEEL, HEAT TREATED
RACE
LINER
STEEL ALLOY
ZINC PLATED
CHROMATE TREATED
*TEFLON FABRIC
27
PMX-T / PMXL-T
3-PIECE PERFORMANCE RACING, STAINLESS STEEL RACE, WEAR RESISTANT, SELF-LUBRICATING
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.0015
-.0005
+.010
-.010
+.000
-.005
+.005
-.005
REF.
+.010
-.010
UNF
3A
+.031
-.031
PMX5T
PMX6T
PMX7T
PMX8T
PMX10T
PMX12T
PMXL5T
PMXL6T
PMXL7T
PMXL8T
PMXL10T
PMXL12T
.3125
.3750
.4375
.5000
.6250
.7500
.900
1.025
1.150
1.337
1.525
1.775
.437
.500
.562
.625
.750
.875
.327
.416
.452
.515
.577
.640
.593
.687
.781
.875
1.062
1.250
1.875
1.938
2.125
2.438
2.625
2.875
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
1.187
1.187
1.281
1.468
1.562
1.687
MATERIALS
BALL
BODY
OR 52100 STEEL
HEAT TREATED R/C 56 MIN.
HARD CHROME PLATED
MANUFACTURER’S OPTION
4340 STEEL
HEAT TREATED
ZINC PLATED
CHROMATE TREATED
RACE
LINER
17-4PH CRES
STAINLESS STEEL
HEAT TREATED
*TEFLON FABRIC
28
a°
ULT.
MIS.
STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
14
8
10
9
12
13
8,302
10,940
14,052
23,314
25,900
34,322
.08
.13
.18
.27
.42
.63
EMX
3-PIECE, PRECISION - EXTRA CAPACITY / PTFE LINERS AVAILABLE
MALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
EMX4
EMX5
EMX6
EMX7
EMX8
EMX10
EMX12
EMXL4
EMXL5
EMXL6
EMXL7
EMXL8
EMXL10
EMXL12
B
DIA.
D
W
T
BALL
+.0015 +.010
-.0005 -.010
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.750
.875
1.000
1.125
1.312
1.500
1.750
+.000
-.005
+.005
-.005
REF.
.375
.437
.500
.562
.625
.750
.875
.281
.344
.406
.437
.500
.562
.687
.500
.625
.719
.812
.937
1.125
1.312
A
LGTH
N
THD.
C
LGTH
+.015
-.015
UNF
3A
+.062
-.031
REF.
WITH
LUBE
WITHOUT
LUBE
1.000
1.250
1.250
1.375
1.500
1.625
1.750
16
14
12
14
12
16
14
3,260
4,920
7,240
7,620
11,920
13,940
21,570
6,680
8,410
11,160
13,660
19,340
21,080
29,800
1.562 5/16-24
1.875 3/8-24
1.938 7/16-20
2.125 1/2-20
2.438 5/8-18
2.625 3/4-16
2.875 7/8-14
a°
MIS.
ANGLE
ULT. STATIC
RADIAL
LOAD (lbs.)
APPROX.
WEIGHT
(lbs.)
.06
.09
.13
.18
.30
.46
.72
MATERIALS
BALL
BODY
NOTES:
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
ALLOY STEEL, HEAT
CHROMATE TREATED
FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: EMX6Z
FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: EMX5Y
FOR TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: EMX12T
RACE
29
ALJM / ALJML
3-PIECE, MALE ALUMINUM SERIES / PTFE LINERS AVAILABLE
MALE ROD
ENDS
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
BALL
DIA.
A
LGTH
N
THD.
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
+.0015
-.0005
+.010
-.010
+.000
-.005
+.005
-.005
REF.
+.015
-.015
UNF
3A
ALJM3
ALJM4
ALJM5
ALJM6
ALJM7
ALJM8
ALJM8H
ALJM10
ALJM10H
ALJM12
ALJM12H
ALJML3
ALJML4
ALJML5
ALJML6
ALJML7
ALJML8
ALJML8H
ALJML10
ALJML10H
ALJML12
ALJML12H
.1900
.2500
.3125
.3750
.4375
.5000
.5000
.6250
.6250
.7500
.7500
.625
.750
.875
1.000
1.125
1.312
1.500
1.500
1.750
1.750
2.000
.312
.375
.437
.500
.562
.625
.625
.750
.750
.875
.875
.250
.281
.344
.406
.437
.500
.500
.562
.562
.687
.687
.437
.500
.625
.719
.812
.937
.937
1.125
1.125
1.312
1.312
1.250
1.562
1.875
1.938
2.125
2.438
2.625
2.625
2.625
2.875
3.000
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
1/2-20
5/8-18
5/8-18
3/4-16
3/4-16
C
LGTH
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062
REF.
-.031
(lbs.)
.750
1.000
1.250
1.250
1.375
1.500
1.562
1.625
1.625
1.750
1.750
13
16
14
12
14
12
12
16
16
14
14
MATERIALS
BALL
BODY
NOTES:
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
ALUMINUM
7075-T6
HARD ANODIZED RED
FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: ALJM4Y
RACE
30
FOR TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: ALJM5T
FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: ALJM6Z
1,360
2,465
2,850
4,208
4,534
7,698
10,150
8,516
16,200
13,319
23,390
.022
.034
.050
.078
.091
.140
.140
.240
.268
.300
.300
ALJF / ALJFL
3-PIECE, ALUMINUM SERIES / PTFE LINERS AVAILABLE
FEMALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
ALJF3
ALJF4
ALJF5
ALJF6
ALJF8
ALJFL3
ALJFL4
ALJFL5
ALJFL6
ALJFL8
B
DIA.
D
W
T
BALL
A
+.0015 +.010 +.000 +.005
-.0005 -.010 -.005 -.005
.1900
.2500
.3125
.3750
.5000
.625
.750
.875
1.000
1.312
.312
.375
.437
.500
.625
.250
.281
.344
.406
.500
N
THD.
REF.
+.015
-.015
UNF
2B
.437
.500
.625
.719
.937
1.062
1.312
1.375
1.625
2.125
10-32
1/4-28
5/16-24
3/8-24
1/2-20
C
E
LGTH DIA.
F
FLAT
a°
ULT.
MIS. STATIC APPROX.
ANGLE RADIAL WEIGHT
LOAD
(lbs.)
+.062 +.010 +.010
REF.
-.031 -.010 -.010
(lbs.)
.500
.687
.687
.812
1.062
.312
.375
.437
.562
.750
.406
.469
.500
.687
.875
13
16
14
12
12
1,360
2,592
2,890
3,952
7,006
.022
.034
.050
.088
.186
MATERIALS
BALL
BODY
NOTES:
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
ALUMINUM
7075-T6
HARD ANODIZED RED
FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: ALJF5Y
FOR TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: ALJF4T
FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: ALJF6Z
RACE
31
ALRSM / ALRSML
3-PIECE, ALUMINUM SERIES / EXTRA STRENGTH - HEAVY DUTY SHANK / PTFE LINERS AVAILABLE
MALE ROD
ENDS
RIGHT
HAND
PART NO.
LEFT
HAND
PART NO.
ALRSM6
ALRSML6
ALRSM7
ALRSML7
ALRSM8
ALRSML8
ALRSM10 ALRSML10
ALRSM10-8 ALRSML10-8
B
DIA.
D
DIA.
W
T
WIDTH WIDTH
+.0015
-.0005
+.010
-.010
+.000
-.005
.3750
.4375
.5000
.6250
.5000
1.125
1.312
1.500
1.750
1.750
.500
.562
.625
.750
.750
BALL
DIA.
A
LGTH
N
THD.
C
LGTH
+.005
-.005
REF.
+.015
-.015
UNF
3A
+.062
-.031
.406
.437
.500
.562
.562
.719
.812
.937
1.125
1.125
2.125
2.438
2.625
2.875
2.875
7/16-20
1/2-20
5/8-18
3/4-16
3/4-16
1.375
1.500
1.625
1.750
1.750
a°
ULT.
APPROX.
MIS.
STATIC WEIGHT
ANGLE RADIAL
LOAD
(lbs.)
REF.
(lbs.)
10
12
10
13
13
MATERIALS
BALL
BODY
NOTES:
52100 STEEL
Rc 56 MIN. HARDNESS
HARD CHROME PLATED
ALUMINUM
7075-T6
HARD ANODIZED RED
FOR GREASE FITTINGS ADD "Z" TO SUFFIX. EXAMPLE: ALRSM6Z
RACE
32
FOR TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: ALRSM8T
7,718
11,000
14,880
19,240
19,240
.088
.121
.200
.317
.317
B
BALL JOINTS, SWAGED CONSTRUCTION WITH DIRT SHIELD
PART
NUMBER
THREAD
B
C
E
F
G
H
J
M
N
B3
B4
B5
B6
B7
B8
B10
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
.438
.469
.531
.688
.875
.875
1.000
.438
.563
.688
.875
1.125
1.125
1.125
.375
.438
.500
.625
.750
.750
.875
.313
.375
.438
.500
.625
.625
.750
.875
.969
1.125
1.375
1.938
1.938
2.063
.438
.500
.563
.750
1.000
1.000
1.000
1.063
1.219
1.406
1.688
2.375
2.375
2.578
.218
.281
.281
.313
.375
.375
.500
.312
.375
.438
.500
.625
.625
.750
TENSILE & FORCE
SHEAR
TO
STRENGTH REMOVE
(lbs.)
STUD
(lbs.)
300
850
1,500
2,400
2,700
2,700
2,950
500
837
1,000
1,512
2,173
2,400
3,150
MATERIALS
BODY
BALL STUD
LOW CARBON STEEL
ZINC PLATED
DICHROMATE TREATED
LOW CARBON STEEL
HEAT TREATED
ZINC PLATED, DICHROMATE TREATED
NOTES:
1. BALL CAVITY IS PRE-LOADED WITH HIGH IMPACT LUBRICANT.
2. THESE BALL JOINTS ARE SUPPLIED WITH A DIRT SHIELD FOR
PROTECTION AGAINST CONTAMINANTS.
ADJUSTER LADDER
MATERIALS
LOW CARBON STEEL - ZINC PLATED
33
COM / COMH
COMMERCIAL SERIES / PTFE LINERS AVAILABLE
BEARING
PART
NO.
COM3
COM4
COM5
COM6
COM7
COM8
COM8-101
COM9
COM10
COM12
COM12T-3R**
COM14
COM16
COMH16***
COMH19***
COMH20***
COMH24***
COMH28***
COMH32***
B
DIA.
D
DIA.
W
WIDTH
T
WIDTH
O
DIA.
BALL
DIA.
F
CHAMFER
ANGLE
a°
MIS.
RADIAL
+.0015
-.0005
+.0000
-.0007
+.005
-.005
+.005
-.005
REF.
REF.
REF.
REF.
.1900
.2500
.3125
.3750
.4375
.5000
.5000
.5625
.6250
.7500
.7500
.8750
1.0000
1.0000
1.1875
1.2500
1.5000
1.7500
2.0000
.5625
.6562
.7500
.8125
.9062
1.0000
1.0000
1.0937
1.1875
1.4375
1.4375
1.5625
1.7500
2.0000
2.3750
2.3750
2.7500
3.1250
3.5000
.281
.343
.375
.406
.437
.500
1.000
.562
.625
.750
.750
.875
1.000
1.000
1.187
1.187
1.375
1.562
1.750
.218
.250
.281
.312
.343
.390
.390
.437
.500
.593
.593
.703
.797
.781
.937
.937
1.094
1.250
1.375
.293
.364
.419
.516
.530
.600
.600
.671
.739
.920
.920
.980
1.118
1.360
1.610
1.610
1.860
2.110
2.360
.406
.500
.562
.656
.687
.781
.781
.875
.968
1.187
1.187
1.312
1.500
1.687
2.000
2.000
2.312
2.625
2.937
.015
.022
.032
.032
.032
.032
.032
.032
.032
.044
.044
.044
.044
.032
.032
.032
.032
.044
.044
11
13.5
12
10
8
9.5
9.5
9.5
8.5
9
9
9.5
10
9
8.5
8.5
8.5
8
8.5
ULT.
STATIC
APPROX.
WEIGHT
LOAD
(lbs.)
(lbs.)
3,250
4,950
6,475
8,400
9,453
13,250
13,250
16,630
21,280
31,920
31,920
41,960
55,200
70,820
100,730
100,730
135,950
176,370
217,060
** BEARING COMES STANDARD WITH SNAP RING AND TEFLON LINER. CONTACT ENGINEERING FOR FURTHER INFORMATION.
***BORE TOLERANCE: +.0025
-.0005
MATERIALS
NOTES:
BODY
RACE
1. LUBRICATION GROOVES IN I.D. & O.D. OF RACE
52100 STEEL
HEAT TREATED
HARD CHROME PLATED
LOW CARBON STEEL
OIL COATED
2. FOR *TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: COM12T
34
(UNITS WITH *TEFLON LINERS HAVE NO
LUBRICATION HOLES OR GROOVES IN RACE.)
.014
.022
.030
.038
.047
.065
.065
.086
.110
.204
.204
.263
.386
.553
.895
.895
1.358
1.948
2.650
FKS / FKS-T
HEAVY DUTY PRECISION SERIES, ALLOY STEEL / PTFE LINERS AVAILABLE
BEARING
PART
NO.
FKS3
FKS4
FKS5
FKS6
FKS7
FKS8
FKS9
FKS10
FKS12
FKS14
FKS16
B
DIA.
D
DIA.
W
WIDTH
T
WIDTH
O
DIA.
BALL
DIA.
F
CHAMFER
ANGLE
a°
MIS.
RADIAL
+.0015
-.0005
+.0000
-.0005
+.005
-.005
+.005
-.005
REF.
REF.
REF.
REF.
.1900
.2500
.3125
.3750
.4375
.5000
.5625
.6250
.7500
.8750
1.0000
.5625
.6562
.7500
.8125
.9062
1.0000
1.0937
1.1875
1.4375
1.5625
1.7500
.281
.343
.375
.406
.437
.500
.562
.625
.750
.875
1.000
.218
.250
.281
.312
.343
.390
.437
.500
.593
.703
.797
.293
.364
.419
.516
.530
.600
.671
.739
.920
.980
1.118
.406
.500
.562
.656
.687
.781
.875
.968
1.187
1.312
1.500
.015
.022
.032
.032
.032
.032
.032
.032
.044
.044
.044
11
13.5
12
10
8
9.5
9.5
8.5
9
9.5
10
ULT.
STATIC APPROX.
WEIGHT
LOAD
(lbs.)
(lbs.)
5,400
8,400
11,600
15,600
22,300
26,900
36,000
40,000
78,000
86,000
104,000
.014
.022
.065
.038
.047
.065
.086
.110
.204
.263
.386
MATERIALS
NOTES:
BALL
RACE
1. LUBRICATION GROOVES IN I.D. & O.D. OF RACE
52100 STEEL
HEAT TREATED
HARD CHROME PLATED
ALLOY STEEL
HEAT TREATED
OIL COATED
2. FOR *TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: FKS8T
(UNITS WITH *TEFLON LINERS HAVE NO
LUBRICATION HOLES OR GROOVES IN RACE.)
35
FKSSX-T / FKSSX-TV / PFKSSX-T
PRECISION SERIES, PTFE LINED
BEARING
PART NO.
PLAIN
FKSSX3T
FKSSX4T
FKSSX5T
FKSSX6T
FKSSX7T
FKSSX8T
FKSSX9T
FKSSX10T
FKSSX12T
FKSSX14T
FKSSX16T
GROOVED
B
DIA.
D
DIA.
+.0000 +.0000
-.0005 -.0005
FKSSX3TV .1900
FKSSX4TV .2500
FKSSX5TV .3125
FKSSX6TV .3750
FKSSX7TV .4375
FKSSX8TV .5000
FKSSX9TV .5625
FKSSX10TV .6250
FKSSX12TV .7500
FKSSX14TV .8750
FKSSX16TV 1.0000
.5625
.6562
.7500
.8125
.9062
1.0000
1.0937
1.1875
1.4375
1.5625
1.7500
W
T
WIDTH WIDTH
O
DIA.
G
DIA.
BALL
DIA.
+.000
-.005
+.005
-.005
REF.
+.000
-.008
REF.
.281
.343
.375
.406
.437
.500
.562
.625
.750
.875
1.000
.218
.250
.281
.312
.343
.390
.437
.500
.593
.703
.797
.293
.364
.419
.516
.530
.600
.671
.739
.920
.980
1.118
.500
.594
.650
.712
.806
.876
.970
1.063
1.313
1.438
1.626
.406
.500
.562
.656
.687
.781
.875
.968
1.187
1.312
1.500
a°
LOAD RATINGS (lbs.)
MIS. STATIC LIMIT
OSIL- APPROX.
ANGLE
LATING WEIGHT
LOAD
(lbs.)
RADIAL AXIAL
MIN.
(lbs.)
(lbs.)
(lbs.)
11
13.5
12
10
9.5
9.5
9.5
8.5
9
9.5
10
3,975
150
6,040
430
8,750
700
10,540 1,100
13,200 1,400
17,900 2,100
23,200 3,680
30,500 4,720
46,400 6,750
62,200 9,350
82,200 12,160
1,500
3,320
5,460
6,600
8,050
10,400
13,000
16,450
23,600
30,250
38,000
.020
.020
.030
.040
.050
.070
.090
.120
.210
.270
.390
NOTES: DIAMETER "B" AND "D" ARE CONCENTRIC WITHIN .005 T.I.R.
NO LOAD BREAKAWAY TORQUE
MATERIALS
BALL
FKSSX-T
HEAT TREATED
PFKSSX-T
52100 STEEL
HEAT TREATED
HARD CHROME PLATED
RACE
LINER
17-4PH
STAINLESS STEEL
HEAT TREATED
*TEFLON FABRIC
36
BORE SIZES
TORQUE
3&4
5 to 12
14 & 16
.25 to 5.0
1.0 to 5.0
2.0 to 8.0
STAKING GROOVE DATA
BORE
SIZES
3&4
5
6&7
8 thru 16
S
LAND
R
RAD.
P
DEPTH
MIN.
+.002
-.005
+.000
-.010
.010
.020
.020
.020
.010
.010
.015
.015
.025
.035
.035
.055
WSSX-T / WSSX-TV
WIDE SERIES, PTFE LINED
BEARING
PART NO.
PLAIN
WSSX3T
WSSX4T
WSSX5T
WSSX6T
WSSX7T
WSSX8T
WSSX9T
WSSX10T
WSSX12T
WSSX14T
WSSX16T
B
DIA.
D
DIA.
-.0005
-.0005
-.002
-.005
WSSX3TV .1900
WSSX4TV .2500
WSSX5TV .3125
WSSX6TV .3750
WSSX7TV .4375
WSSX8TV .5000
WSSX9TV .5625
WSSX10TV .6250
WSSX12TV .7500
WSSX14TV .8750
WSSX16TV 1.0000
.6250
.6250
.6875
.8125
.9375
1.0000
1.1250
1.1875
1.3750
1.6250
2.1250
.437
.437
.437
.500
.562
.625
.687
.750
.875
.875
1.375
.327
.327
.317
.406
.442
.505
.536
.567
.630
.755
1.005
GROOVED
W
T
O
BALL
a°
LOAD RATINGS (lbs.)
WIDTH WIDTH SHOULDER DIA.
MIS. STATIC LIMIT
DYNAMIC
APPROX.
DIA.
ANGLE
OSCILLATING WEIGHT
(lbs.)
+.0000 +.0000 +.000 +.005
RADIAL AXIAL RADIAL LOAD
REF.
.301
.301
.360
.466
.537
.607
.721
.747
.845
.995
1.269
REF.
MIN.
.531
.531
.593
.687
.781
.875
1.000
1.062
1.250
1.375
1.875
15
15
14
8
10
9
10
12
13
6
12
(lbs.)
(lbs.)
2,500
5,500
9,400
13,700
20,700
21,400
26,600
29,000
37,000
65,200
104,000
1,770
1,770
1,640
2,630
3,650
4,970
5,370
6,130
7,730
10,800
19,300
4,900
4,900
6,050
8,310
11,750
14,950
18,100
20,250
26,200
33,600
56,250
.031
.031
.035
.060
.080
.100
.135
.160
.240
.350
.970
NOTES: DIAMETER "B" AND "D" ARE CONCENTRIC WITHIN .005 T.I.R.
MATERIALS
NO LOAD BREAKAWAY TORQUE
BALL
RACE
HEAT TREATED
17-4PH STAINLESS STEEL
HEAT TREATED
BORE SIZES
TORQUE
3
4 thru 12
14 & 16
.5 to 5.0 in. lbs.
1.0 to 5.0 in. lbs.
2.0 to 8.0 in. lbs.
LINER
*TEFLON FABRIC
STAKING GROOVE DATA
BORE
SIZES
3 thru 5
6 thru 10
12 thru 16
S
LAND
X
GROOVE
R
RAD.
P
DEPTH
+.000
-.010
+.000
-.010
+.000
-.010
+.000
-.015
.020
.030
.030
.045
.055
.080
.015
.020
.020
.030
.040
.060
37
IN-P
PRECISION PLASTIC RACE SERIES, LIGHT DUTY
BEARING
PART
NO.
IN3P
IN4P
IN5P
IN6P
IN7P
IN8P
IN10P
IN12P
B
DIA.
D
DIA.
W
WIDTH
T
WIDTH
O
DIA.
BALL
DIA.
F
CHAMFER
ANGLE
+.0025
-.0005
+.0000
-.0010
+.005
-.005
+.005
-.005
REF.
REF.
REF.
REF.
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
.5000
.5781
.7031
.8125
.9375
1.0625
1.2500
1.4375
.312
.375
.437
.500
.562
.625
.750
.875
.250
.281
.344
.406
.437
.500
.562
.687
.307
.331
.447
.516
.587
.699
.839
.978
.437
.500
.625
.718
.812
.937
1.125
1.312
.020
.025
.025
.030
.030
.030
.030
.035
13
16
14
12
14
12
16
14
MATERIALS
BALL
RACE
LOW CARBON STEEL
CASE HARDENED
ZINC PLATED
TEFLON LUBRICATED,
FIBER REINFORCED
ENGINEERING PLASTIC
38
a°
MIS.
RADIAL
ULT.
STATIC
APPROX.
WEIGHT
LOAD
(lbs.)
(lbs.)
939
1,734
2,236
3,209
3,395
5,360
5,920
9,240
.010
.014
.024
.036
.050
.074
.122
.188
K SERIES
SPECIAL PURPOSE SERIES
BEARING
PART
NO.
K3
K4
K5
K6
K7
K8
K10
K12
K16
K19
K24
K30
B
DIA.
D
DIA.
W
WIDTH
*T
WIDTH
O
DIA.
BALL
DIA.
F
CHAMFER
ANGLE
+.0000
-.0005
+.0000
-.0005
+.000
-.005
+.000
-.005
REF.
REF.
.015
-.000
a°
MAXIMUM
MIS.
STATIC
APPROX.
RADIAL
WEIGHT
LOAD
(lbs.)
REF.
(lbs.)
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.7500
1.0000
1.1875
1.5000
1.8750
.6250
.7500
.8750
1.0000
1.1875
1.3125
1.5625
2.2500
2.3750
2.6250
3.2500
4.0000
.281
.375
.437
.500
.562
.687
.875
1.250
1.125
1.250
1.500
1.625
.187
.281
.313
.375
.437
.531
.687
.937
.875
1.000
1.250
1.313
.293
.354
.447
.517
.586
.637
.802
1.038
1.345
1.562
2.000
2.521
.406
.500
.625
.718
.812
.937
1.187
1.625
1.750
2.000
2.500
3.000
.016
.016
.016
.016
.032
.044
.044
.044
.062
.085
.085
.125
16.5
14.5
14
12.5
11
12.5
12
15
10
8.5
7
7
2,961
5,246
6,554
8,606
11,100
15,600
25,700
47,600
48,200
63,000
98,000
123,500
.02
.04
.05
.08
.12
.18
.33
.97
.94
1.27
2.38
3.75
* "T" TOLERANCE ACROSS INSERTS IS +/- .015.
MATERIALS
OUTER MEMBER
LOW-CARBON STEEL
ZINC PLATED
CHROMATE TREATED ON ALL SURFACES
EXPOSED AFTER INSTALLATION
RACE
BALL
BRASS OR
SINTERED BRONZE
MANUFACTURER’S OPTION
52100 STEEL
HEAT TREATED
HARD CHROME PLATED
39
GEZ-ES
INCH - SPHERICAL PLAIN BEARINGS WITH SINGLE FRACTURED RACE
BEARING
PART NUMBER
OPEN
SEALED
GEZ8ES
GEZ10ES
GEZ12ES
GEZ14ES
GEZ16ES
GEZ20ES
GEZ22ES
GEZ24ES
GEZ28ES
GEZ32ES
GEZ36ES
GEZ40ES
GEZ44ES
GEZ48ES
GEZ52ES
GEZ56ES
GEZ60ES
GEZ64ES
GEZ68ES
GEZ72ES
GEZ76ES
GEZ80ES
GEZ96ES
GEZ8ES-2RS
GEZ10ES-2RS
GEZ12ES-2RS
GEZ14ES-2RS
GEZ16ES-2RS
GEZ20ES-2RS
GEZ22ES-2RS
GEZ24ES-2RS
GEZ28ES-2RS
GEZ32ES-2RS
GEZ36ES-2RS
GEZ40ES-2RS
GEZ44ES-2RS
GEZ48ES-2RS
GEZ52ES-2RS
GEZ56ES-2RS
GEZ60ES-2RS
GEZ64ES-2RS
GEZ68ES-2RS
GEZ72ES-2RS
GEZ76ES-2RS
GEZ80ES-2RS
GEZ96ES-2RS
B
DIA.
D
DIA.
T
WIDTH
MAX.
MIN.
MAX.
MIN.
MAX.
MIN.
MAX.
MIN.
.5000
.6250
.7500
.8750
1.0000
1.2500
1.3750
1.5000
1.7500
2.0000
2.2500
2.5000
2.7500
3.0000
3.2500
3.5000
3.7500
4.0000
4.2500
4.5000
4.7500
5.0000
6.0000
.4995
.6245
.7495
.8745
.9995
1.2495
1.3745
1.4995
1.7495
1.9995
2.2494
2.4994
2.7494
2.9994
3.2492
3.4992
3.7492
3.9992
4.2492
4.4992
4.7490
4.9990
5.9990
.8750
1.0625
1.2500
1.4375
1.6250
2.0000
2.1875
2.4375
2.8125
3.1875
3.5625
3.9375
4.3750
4.7500
5.1250
5.5000
5.8750
6.2500
6.6250
7.0000
7.3750
7.7500
8.7500
.8745
1.0620
1.2495
1.4370
1.6245
1.9995
2.1870
2.4370
2.8120
3.1869
3.5619
3.9369
4.3744
4.7493
5.1243
5.4993
5.8743
6.2490
6.6240
6.9990
7.3738
7.7488
8.7488
.437
.547
.656
.765
.875
1.093
1.187
1.312
1.531
1.750
1.969
2.187
2.406
2.625
2.844
3.062
3.281
3.500
3.719
3.937
4.156
4.375
4.750
.432
.542
.651
.760
.870
1.088
1.182
1.307
1.526
1.745
1.963
2.181
2.400
2.619
2.836
3.054
3.273
3.492
3.711
3.929
4.148
4.365
4.740
.375
.469
.562
.656
.750
.937
1.031
1.125
1.312
1.500
1.687
1.875
2.062
2.250
2.437
2.625
2.812
3.000
3.187
3.375
3.562
3.750
4.125
.365
.459
.552
.646
.740
.925
1.019
1.113
1.300
1.484
1.671
1.859
2.046
2.230
2.417
2.605
2.792
2.980
3.167
3.355
3.542
3.730
4.105
MATERIALS
O
F
a°
ULT.
DIA. CMFR MIS. STATIC APPROX.
ANG. RADIAL WEIGHT
LOAD
(lbs.)
REF.
REF. REF.
(lbs.)
.555
.720
.858
1.000
1.087
1.417
1.515
1.622
1.996
2.280
2.555
2.886
3.114
3.417
3.720
4.000
4.280
4.559
4.835
5.142
5.417
5.720
6.622
.024
.024
.024
.024
.024
.024
.039
.039
.039
.039
.039
.039
.039
.039
.039
.039
.039
.039
.039
.039
.039
.039
.039
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
5
9,217
14,635
21,356
28,550
37,317
58,448
69,688
84,300
114,648
150,616
191,080
238,288
281,000
337,200
395,648
458,595
530,528
595,720
674,400
764,320
843,000
932,920
1,168,960
NOTES:
BALL
RACE
ALLOY STEEL
HEAT TREATED
PHOSPHATE COATED
ALLOY STEEL, HEAT TREATED
SINGLE FRACTURE
PHOSPHATE COATED
40
W
WIDTH
1. LUBRICATING HOLES AND GROOVES ARE LOCATED
ON INNER AND OUTER RACES.
2. TYPE 2RS HAS SEALS ON BOTH SIDES.
CHECK AVAILABILITY ON ALL SIZES.
.049
.079
.117
.187
.267
.512
.773
.930
1.413
2.055
2.932
4.079
5.335
6.834
8.422
10.560
12.743
15.410
18.541
21.583
25.353
29.762
38.581
GE-ES
METRIC - SPHERICAL PLAIN BEARINGS WITH SINGLE FRACTURED RACE
BEARING
PART NUMBER
OPEN
SEALED
GE12E
GE15ES
GE17ES
GE20ES
GE25ES
GE30ES
GE35ES
GE40ES
GE45ES
GE50ES
GE60ES
GE70ES
GE80ES
GE90ES
GE100ES
GE110ES
GE120ES
GE140ES
GE160ES
GE15ES-2RS
GE17ES-2RS
GE20ES-2RS
GE25ES-2RS
GE30ES-2RS
GE35ES-2RS
GE40ES-2RS
GE45ES-2RS
GE50ES-2RS
GE60ES-2RS
GE70ES-2RS
GE80ES-2RS
GE90ES-2RS
GE100ES-2RS
GE110ES-2RS
GE120ES-2RS
GE140ES-2RS
GE160ES-2RS
B
DIA.
D
DIA.
W
WIDTH
T
WIDTH
MAX.
MIN.
MAX.
MIN.
MAX.
MIN.
MAX.
12.000
15.000
17.000
20.000
25.000
30.000
35.000
40.000
45.000
50.000
60.000
70.000
80.000
90.000
100.000
110.000
120.000
140.000
160.000
11.992
14.992
16.992
19.990
24.990
29.990
34.988
39.988
44.988
49.988
59.985
69.985
79.985
89.080
99.980
109.980
119.980
139.975
159.975
22.000
26.000
30.000
35.000
42.000
47.000
55.000
62.000
68.000
75.000
90.000
105.000
120.000
130.000
150.000
160.000
180.000
210.000
230.000
21.991
25.991
29.991
34.989
41.989
46.989
54.987
61.987
67.987
74.987
89.985
104.985
119.985
129.982
149.982
159.975
179.975
209.970
229.970
10.00
12.00
14.00
16.00
20.00
22.00
25.00
28.00
32.00
35.00
44.00
49.00
55.00
60.00
70.00
70.00
85.00
90.00
105.00
9.88
11.88
13.88
15.88
19.88
21.88
24.88
27.88
31.88
34.88
43.85
48.85
54.85
59.80
69.80
69.80
84.80
89.75
104.75
7.00
9.00
10.00
12.00
16.00
18.00
20.00
22.00
25.00
28.00
36.00
40.00
45.00
50.00
55.00
55.00
70.00
70.00
80.00
MATERIALS
O
F
a°
ULT.
DIA. CMFR MIS. STATIC APPROX.
ANG. RADIAL WEIGHT
LOAD
(kg)
MIN. REF. REF. REF.
(kN)
6.76
8.76
9.76
11.76
15.76
17.76
19.70
21.70
24.70
27.70
35.60
39.60
44.60
49.50
54.50
54.50
69.50
69.40
79.40
15
18
20
24
29
34
39
45
50
55
66
77
88
98
109
120
130
150
170
0.3
0.3
0.3
0.3
0.6
0.6
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
11
8
10
9
7
6
6
7
7
6
6
6
6
5
7
6
6
7
8
54
85
106
146
240
310
400
500
640
780
1,220
1,560
2,000
2,450
3,050
3,250
4,750
5,400
6,800
.016
.025
.041
.061
.11
.14
.22
.30
.40
.54
1.00
1.50
2.20
2.70
4.30
4.70
8.00
11.00
14.00
NOTES:
BALL
RACE
1. LUBRICATING HOLES AND GROOVES ARE LOCATED
ALLOY STEEL
HEAT TREATED
PHOSPHATE COATED
ALLOY STEEL, HEAT TREATED
SINGLE FRACTURE
PHOSPHATE COATED
2. TYPE 2RS HAS SEALS ON BOTH SIDES.
ON INNER AND OUTER RACES.
CHECK AVAILABILITY ON ALL SIZES.
41
-HB
HIGH MISALIGNMENT BUSHINGS
PART
NUMBER
B
C
D
E
8-6HB
10-8HB
12-8HB
12-10HB
14-8HB
14-10HB
16-10HB
16-10HB-2
16-12HB
.3750
.5000
.5000
.6250
.5000
.6250
.6250
.6250
.7500
.645
.840
.995
.995
1.040
1.050
1.245
1.135
1.135
.627
.900
.900
.900
1.055
1.055
1.497
1.370
1.370
.342
.530
.475
.475
.625
.625
.817
.690
.690
MATERIAL
17-4PH STAINLESS STEEL
F
SIZE
G
.667
.795
.930
.930
1.035
1.035
1.225
1.225
1.225
.499
.624
.749
.749
.874
.874
.999
.999
.999
BEARING
8
10
12
12
14
14
16
16
16
NOTES:
1. ALL DIMENSIONS ARE IN INCHES.
2. MISALIGNMENT BUSHINGS INCREASE MISALIGNMENT ANGLE AND REDUCE HOLE
SIZES IN ROD ENDS AND SPHERICAL BEARINGS.
3. ALL BUSHINGS ARE SOLD IN PAIRS.
CENTER FINDERS
CENTER FINDERS ARE USED TO FIND THE
LENGTH BETWEEN TWO CONNECTING
RODS FOR EASE OF ASSEMBLY.
PART
NUMBER
BEARING
SIZE
B
CTR8
CTR10
CTR12
CTR14
CTR16
8
10
12
14
16
.500
.625
.750
.875
1.000
NOTES:
1. CENTER FINDERS ARE SOLD IN PAIRS.
2. TO PURCHASE A COMPLETE PAIR OF EACH SIZE
USE PART NUMBER CTR1.
42
STUDDED ROD ENDS
NOTES:
1. AVAILABLE ON ALL SERIES.
ROD END
PART
SIZE
L
LENGTH
+.015
-.015
3
4
5
6
7
8
10
12
1.016
1.031
1.219
1.562
1.750
2.000
2.500
3.000
P
LENGTH
REF.
.500
.562
.687
.906
1.062
1.125
1.500
1.812
S
LENGTH
N
THREAD
UNF
2A
MIN.
.437
.500
.593
.812
.937
1.000
1.375
1.625
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
2. STUD MATERIAL: LOW CARBON STEEL AND
ALLOY STEEL (HEAT TREATED) - ZINC PLATED.
3. STUD MISALIGNMENT APPROX. +/- 25o IN ANY
DIRECTION.
4. TO SPECIFY RIGHT HAND STUD, ADD SUFFIX "Y"
TO PART NUMBER. EXAMPLE: CM6Y
5. TO SPECIFY LEFT HAND STUD, ADD SUFFIX "YL"
TO PART NUMBER. EXAMPLE: CM6YL
6. TO SPECIFY HEAT TREATED STUD, ADD SUFFIX
"YX" TO PART NUMBER. EXAMPLE: CM6YX
7. FOR LOAD RATINGS WITH STUDS, PLEASE
CONTACT F.K. ENGINEERING DEPARTMENT.
SPECIAL PRODUCTS
MATERIAL
STEEL - LOW CARBON - ZINC PLATED ALUMINUM
NOTES:
1. JAM NUTS ARE SOLD IN LOTS OF 25 PCS.
INCH STEEL JAM NUTS
RIGHT
HAND
*
*
*
*
LEFT
HAND
SJNR03
SJNL03
SJNR04
SJNL04
SJNR05
SJNL05
SJNR06
SJNL06
SJNR07
SJNL07
SJNR08
SJNL08
SJNR10
SJNL10
SJNR12
SJNL12
SJNR14
SJNL14
SJNR16
SJNL16
SJNR16-1 SJNL16-1
SJNR16-2 SJNL16-2
INCH ALUMINUM JAM NUTS
METRIC STEEL JAM NUTS
THREAD
SIZE
UNF 2B
HEX
SIZE
RIGHT
HAND
LEFT
HAND
THREAD
SIZE
UNF 2B
HEX
SIZE
RIGHT
HAND
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
7/8-14
1-1/4-12
1-14
1-12
3/8
7/16
1/2
9/16
11/16
3/4
15/16
1-1/8
1-9/32
1-13/16
1-3/8
1-3/8
AJNR03
AJNR04
AJNR05
AJNR06
AJNR07
AJNR08
AJNR10
AJNR12
AJNL03
AJNL04
AJNL05
AJNL06
AJNL07
AJNL08
AJNL10
AJNL12
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
3/8
7/16
1/2
9/16
11/16
3/4
3/4
1-1/8
SJNR5M
SJNR6M
SJNR8M
SJNR10M
SJNR12M
SJNR14M
SJNR16M
SJNR18M
SJNR20M
* HEX SIZE MAY VARY DEPENDING ON
LEFT
HAND
THREAD
SIZE
6H
HEX
SIZE
SJNL5M
M5 X 0.8
3/8
SJNL6M
M6 X 1.0
7/16
SJNL8M M8 X 1.25
1/2
SJNL10M M10 X 1.5
9/16
SJNL12M M12 X 1.75 11/16
SJNL14M M14 X 2.0
3/4
SJNL16M M16 X 2.0 15/16
SJNL18M M18 X 1.5 1 3/32
SJNL20M M20 X 1.5 1 3/32
AVAILABILITY OF MATERIAL.
43
SPECIAL PRODUCTS
MATERIALS
LOW-CARBON STEEL
ZINC PLATED
SOLID ROD ENDS
PART
NUMBER
RD1
RD2
RD3
RD4
RD5
RD8
BORE
X THD.
REF.
5/8 x
5/8 x
3/4 x
1/2 x
1/2 x
1/2 x
5/8
3/4
3/4
1/2
3/4
3/4
B
DIA.
D
DIA.
T
WIDTH
A
LENGTH
C
LENGTH
N
THREAD
+.0025
-.0005
.6250
.6250
.7500
.5000
.5000
.5000
+.010
-.010
1.500
1.750
1.750
1.312
1.750
1.500
+.005
-.005
.750
.875
.875
.625
.875
.750
+.015
-.015
2.625
2.875
2.875
2.437
2.875
2.625
+.062
-.031
1.625
1.750
1.750
1.500
1.750
1.625
UNF
3A
5/8-18
3/4-16
3/4-16
1/2-20
3/4-16
3/4-16
ULT. RADIAL
STATIC
LOAD
(lbs.)
16,600
18,500
18,500
12,100
18,500
18,500
MATERIALS
LOW-CARBON STEEL
ZINC PLATED
CHROMATE TREATED
NOTES:
1. 17-4 PH STAINLESS STEEL
OFFERED ON SIZES: 1 & 2
EXAMPLE: SCV1 & SCV2
CLEVIS
PART
NUMBER
CV1
CV2
CV3
CV4
CV5
CV8
PART NO.
CV8-ASM
44
BORE
X THD.
B
DIA.
D
DIA.
T
WIDTH
A
LENGTH
C
LENGTH
S
SLOT
N
THREAD
REF.
+.0025
-.0005
+.010
-.010
+.005
-.005
+.015
-.015
+.062
-.031
+.005
-.005
UNF
3A
3/8 x 5/8
1/2 x 5/8
3/8 x 3/4
1/2 x 3/4
3/8 x 1/2
9/16 x 1/2
.3750
.5000
.3750
.5000
.3750
.5625
1.125
1.125
1.125
1.125
.875
1.125
.825
.825
.825
.825
.655
.875
3.375
3.375
3.375
3.375
3.012
5.563
2.000
2.000
2.000
2.000
1.700
3.900
.375
.375
.375
.375
.250
.250
5/8-18
5/8-18
3/4-16
3/4-16
1/2-20
1/2-20
WELDABLE TUBE ENDS
TUBE SIZE
X WALL
THICKNESS
3/8 X .058
1/2 X .058
5/8 X .058
3/4 X .058
3/4 X .065
7/8 X .058
7/8 X .065
7/8 X .083
1" X .058
1" X .065
1" X .083
1" X .095
1 1/8 X .058
1 1/8 X .065
1 1/8 X .083
1 1/8 X .095
1 1/4 X .095
1 1/4 X .120
1 3/8 X .095
1 3/8 X .120
1 1/2 X .095
1 1/2 X .120
1 1/2 X .250
1 3/4 X .120
1 3/4 X .250
10-32
1/4-28
5/16-24
1202
1203
1303
1403
1503
3/8-24
7/16-20
1304
1404
1504
1604
1704
1804
1904
2004
2104
2204
1305
1405
1505
1605
1705
1805
1905
2005
2105
2205
1/2-20
5/8-18
3/4-16
7/8-14
1907
2007
2107
2207
2307
2407
2507
2607
2707
2807
2907
3007
3057
3108
3208
3308
3408
2508
2608
2708
2808
2908
3008
3058
3109
3209
3309
3409
3310
3410
1-14
1 1/4-12
1101
1606
1706
1806
1906
2006
2106
2206
2306
2406
2506
2606
3311
NOTE:
All tube ends are made from 4130 chromemoly. Left-handed threaded parts have a distinctive mark around the
outside diameter. F.K. Bearings makes no warranties, expressed or implied, as the suitability of our Tube Ends for
any application. Tube Ends must be welded in place by a skilled welder, using good welding techniques.
45
RERS SERIES SEALS
TOTALLY ENCLOSE AND PROTECT THE ROD END FROM DIRT AND WATER
BOOT SIZE
PART NUMBER
RERS
RERS
RERS
RERS
RERS
1
2
3
4
5
INCH SIZE ROD ENDS
MALE
3/16", 1/4", 5/16"
3/8", 7/16"
1/2", 5/8", 3/4"
7/8", 1"
1 1/4"
NOTE: STANDARD PACKAGING IS SIX (6) SEALS PER PACKAGE.
46
FEMALE
3/16", 1/4", 5/16"
3/8”, 7/16”
1/2", 5/8", 3/4"
7/8", 1"
1 1/4"
METRIC SIZE ROD ENDS
MALE
6mm, 8mm
10mm, 12mm
14mm, 16mm, 18mm
20mm, 22mm, 25mm
30mm, 35mm
FEMALE
6mm, 8mm
10mm, 12mm
14mm, 16mm, 18mm
20mm. 22mm, 25mm
30mm, 35mm
WS SERIES SEALS
ECONOMICAL PROTECTION FOR YOUR ROD END
STANDARD SIZES
PART
NUMBER
WS
WS
WS
WS
WS
WS
WS
WS
WS
WS
1875
2500
3125
3750
4375
5001
6250
7500
8750
1000
ROD END
SIZE
SIZE
A
B
C
H
T
3
4
5
6
7
8
10
12
14
16
0.187
0.250
0.312
0.375
0.437
0.500
0.625
0.750
0.875
1.000
0.200
0.260
0.322
0.385
0.448
0.510
0.635
0.760
0.885
1.010
0.326
0.375
0.487
0.530
0.626
0.730
0.882
1.006
1.125
1.230
0.442
0.500
0.700
0.800
0.875
1.125
1.235
1.381
1.890
2.100
0.095
0.120
0.200
0.220
0.250
0.250
0.267
0.367
0.315
0.500
0.020
0.027
0.047
0.047
0.047
0.047
0.047
0.047
0.042
0.050
METRIC
PART
NUMBER
ROD END
SIZE
A
B
C
H
T
WS 5MM
WS 6MM
WS 8MM
WS 10MM
WS 12MM
WS 14MM
WS 16MM
WS 18MM
WS 20MM
WS 25MM
WS 30MM
5
6
8
10
12
14
16
18
20
25
30
5.25
6.25
8.25
10.25
12.25
14.25
16.25
18.25
20.25
25.25
30.25
8.28
9.53
12.37
13.46
18.54
18.54
22.40
22.60
25.15
33.80
36.00
11.22
12.70
17.78
20.32
28.58
28.57
31.70
32.69
38.10
53.30
55.88
2.41
3.05
5.08
5.59
6.35
6.35
6.80
8.25
10.16
12.70
13.45
0.50
1.69
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.50
1.50
Note: * One (1) rod end requires two (2) rod end seals.
* Standard packaging is six (6) seals per package.
* One pack seals three (3) rod ends.
47
ENGINEERING DATA
RADIAL LOAD - A LOAD APPLIED NORMAL TO THE BEARING BORE
AXIS AND PARALLEL TO THE SHANK AXIS.
AXIAL LOAD - A LOAD APPLIED ALONG THE BEARING BORE AXIS.
STATIC RADIAL LIMIT LOAD - THAT STATIC LOAD REQUIRED TO PRODUCE A SPECIFIED PERMANENT SET IN THE BEARING STRUCTURE. IT WILL VARY FOR A GIVEN SIZE AS A FUNCTION OF CONFIGURATION. IT MAY ALSO BE PIN LIMITED AS A FUNCTION OF
BODY RESTRAINTS AS IN THE CASE OF ROD END BEARINGS.
STATIC RADIAL ULTIMATE LOAD - THAT LOAD THAT CAN BE APPLIED TO A BEARING WITHOUT FRACTURING THE BALL, RACE, OR
ROD END EYE. THE ULTIMATE LOAD RATING IS USUALLY, BUT NOT ALWAYS, 1.5 TIMES THE LIMIT LOAD.
STATIC AXIAL LIMIT LOAD - THAT LOAD THAT CAN BE APPLIED TO A BEARING TO PRODUCE A SPECIFIED PERMANENT SET IN THE
BEARING STRUCTURE.
STATIC AXIAL ULTIMATE LOAD - THAT LOAD THAT CAN BE APPLIED TO A BEARING WITHOUT SEPARATING THE BALL FROM THE
RACE. THE ULTIMATE LOAD RATING IS USUALLY, BUT NOT ALWAYS, 1.5 TIMES THE LIMIT LOAD.
ANGLE OF MISALIGNMENT
FIGURE 2
a2 = sin-1 W - sin-1 H
A
A
FIGURE 1
D
D
48
B
M
D
R
H
A
W
-
FIGURE 3
R
R
Ball Bore
Outer Race Chamfer
Head Diameter or Outer Race Diameter
Ball Diameter
Housing Width
(D-2M)2+H2
Ball Width
FIGURE 4
a4 = cos-1 B - sin-1 H
R
R
INTERCHANGE TABLE
F.K.
ALINABAL
MALE ROD ENDS
CM
AM-GP
CM-T
AM-T-GP
CM-Y
AM-S-GP
CM-Z
AM-8
CM-M
CMX
M
M-SB
VM-G
NJM
PM
JM
LCTM-X5
JM-T
JMX
RM-X5
RJMX-T
RSM
LCRM-1-X5
RSMX
RM-1-X5
RRSMX-T
HRSMX-T
PMX-T
KMX
ALJM/ALJMH
ARM-X5
ALRSM
ARM-1-X5
SCM-T
SJM-T
SRSM-T
SCM-MT
FEMALE ROD ENDS
CF
AF-GP
CF-T
AF-T-GP
F
F-SB
VF-G
NJF
PF
JF
CF
JF-T
JFX
ALJF
SCF-T
SJF-T
SCF-MT
SPHERICAL BEARINGS
COM
COM-E
COMH
HIN-T
K
VBC-G
FKS
FKS-T
FKSSX-T
FKSSX-TV
WSSX-T
WSSX-TV
AURORA
CM
VCM
CM-S
CM-Z
CM-M
RM-X5
BM
MM / KM
MM-T / KM-T
AM
RAM-T
XM
XAM
RXAM-T
HXAM-T
PRM-T
ALM
XALM
CM-ET
SM-ET
CW
CW-T
BW
MW / KW
MW-T / KW-T
AW
HEIM /
BOSTON
MORSE /
SPHERCO
M-CR
CFM
CFM-T
CFM-Y
CFM-N
M-CRY
M-CRG
HM
HM-C
CMHD
HMA
HME
BHM
TRE
TM
CTMD
TRE-T
ARE
COM-KH
COM-KHT
NC-T
NC-TG
WC-T
WC-TG
NMB / NHBB
MSM
MSM-T
MSM-S
MSM-Z
EM-M
MAX
AHM / LSPL
MBM
NM/SPM
MTSM
MTSM-T
TSMX
NSMX-T
RM
RMX
HAMR
AMRT
HAMRX
AXM
XAMX
ARYT-ECR
ART-ES
KCA
KCAX
SSM-T
SSAM-T
SSHM-T
ME
F-CR
HF
HFC
CFHD
HFA
HFE
CFF
CFF-T
TR
TF
CTFD
TR-T
AR
CW-ET
SW-ET
COM
HCOM
HAB-T
TUTHILL
COM
COM
BH-LS
LS
LHA
FLBG
SBGS
NE/LHSSE
NE-G/LHSSV V
WE
WE-G
NRR
NRRG
WRR
WRRG
MSF
MSF-T
ALRE
XALRE
ART-ECR
ARHT-ECR
AHF-CSPL
MBF
NF/SPF
MTSF
MTSFT
TSFX
HAFR
AFRT
HAFRX
SSF-T
SSAF-T
ART-CR
COM
YSSB
NSSB
NSSB-V
WSSB
WSSB-V
CBG
RSH
ABYT
ASL-G
RS
RS-T
ABT
ABT-V
ABWT
ABWT-V
NOTE: This interchange table shows approximate equivalency. It is
WARNING!
not intended that all manufacturers’ products are functionally inter-
The manufacturer can not determine all
applications of its products. It is up to the
customer to determine a suitable part for
their application. For assistance, please
contact F.K.’s Engineering Department.
changeable in all applications. F.K. Bearings reserves the right to
change specifications and other information included in this catalog
without notice. All information, data, and dimension tables in this catalog have been carefully compiled and thoroughly checked. However,
no responsibility for possible errors or ommisions can be assumed.
49

FK Catalog - FK Rod Ends

Transcription

Similar documents

Here - FK Rod Ends

Ready Shape Catalog

Here - FK Rod Ends

Die BUCHSTAVIER - Das Dosierte Leben

BEFORE AND AFTER BODY SHAPERS

Australian Distributor Ph: 07 5568 0463 Email