Kubota 2013-14 Construction Equipment Attachments Catalog

Transcription

2013 -2014 Construction Equipment
At tac h m e n t s C ATA L O G
K u b o ta . c o m
K u b o ta C o n s t r u c t i o n E q u i p m e n t At tac h m e n t s a n d A cce s s o r i e s
GET THE JOB DONE: DONE QUICKLY,
DONE WELL, AND DONE SAFELY.
Ta b le o f C o n t e n t s
Excavator Attachments
k008-3 / U17 / KX018-4 / U25S / KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / U55-4 / KX057-4 / KX080-4
05 » EXCAVATOR ATTACHMENTs INTRODUCTION
07 » Excavator Buckets
11 » Excavator Attachments
15 » Controls, Comfort and Convenience
Track Loader Attachments
SVL75 + SVL75-2 / SVL90 + SVL90-2
21 » Track loader ATTACHMENTs INTRODUCTION
23 » Buckets / material handling
27 » Multi-Use Attachments
31 » Landscape attachments
35 » Construction Attachments
39 » SNOW Attachments
41 » Accessories
45 » Enclosure Kits
Excavator Attachments
4
|
2 0 1 3 - 1 4 C o n s t r u c t i o n E q u i p m e n t At tac h m e n t C ata l o g
Your Kubota Excavator already gives you the power and durability to tackle
the toughest tasks and a variety of big jobs. From the daily dependability
of the workhorse KX040-4, to the awesome power of the KX080-4, to the
compact, efficient and technologically-advanced performance of the K008-3,
there’s a Kubota Excavator model to meet your exact needs.
E x ca v a t o r A t t ac h m e n t s
Welcome To Kubota’s Heavy-Duty, High
Performance Excavator Accessory Catalog.
Your Kubota Excavator already performs at the highest levels of its design
and is capable of even more. The attachments, tools and accessories offered
here are of the highest quality, engineered to fit your Kubota Excavator
and designed to take your machine to the next level.
No matter where your Kubota works—on the construction site, the ranch,
in the swamp, on the farm, city or country—we want to offer you the best
tools and accessories to help you get the job done: done quickly, done
well, and done safely.
E x ca v a t o r s
5
E x ca v a t o r B u cke t s
E x ca v a t o r s
6
|
Your Kubota Excavator is an outstanding working tool capable of performing a wide
variety of jobs. Increase the versatility of your Kubota to get the job done more quickly
and easily with these high-quality buckets. Kubota buckets are designed for an easy
cut, and feature tapered side plates, horizontal wear straps, an extra rigid channel, and
tip radius to Kubota specifications.
Excavator Buckets
Trenching Buckets
Trenching Buckets are recommended for moderate to heavy soil with loose rock. All Kubota Trenching Buckets
feature quality construction with high strength steel. Pin-on buckets are available in orange. Quick attach
buckets are available in blue.
Pin-on
Pin-on trenching buckets are available in a variety of widths from 8" to 36"
Available for: K008-3 / U17 / KX018-4 / U25S / KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / KX080-4
Quick Attach
Quick attach trenching buckets are available in a variety of widths from 9"
to 36"
Available for: U17 / KX018-4 / U25S / KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / U55-4 / KX057-4
/ KX080-4
Ditch Cleaning / Grading Buckets
include a rigid top channel and bottom wear straps for extra reinforcement and longer work life. Kubota
recommends the optional bolt on cutting edge with these buckets.
Pin-on & Quick Attach
Ditch Cleaning / Grading Buckets are available in a variety of widths from 36"
to 60" in pin-on and quick attach models.
E x ca v a t o r s
Ideal for ditch maintenance, construction, grading, and finish work (DCG buckets have no teeth). Features
Available for: KX121-3S / KX040-4 / U55-4 / KX057-4 / KX080-4
C o n s u lt D e a l e r P r i c e L i s t s f o r p r i c e a n d d e ta i l e d s p e c i f i c at i o n s | 2 0 1 3 - 1 4 C o n s t r u c t i o n E q u i p m e n t At ta c h m e n t C ata l o g
|
7
Excavator Buckets (cont.)
Tilt Grading Buckets
Recommended for angled slope work, ditch maintenance, grading and finish work, Tilt Grading
Buckets feature 45° hydraulic tilt action. Kubota recommends using the optional bolt on cutting
edge with these buckets.
Quick Attach
Tilt Grading Buckets are available in a variety of quick attach
widths from 36" to 54"
Available for: KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / KX080-4
Cemetery Bucket
Originally designed to dig graves, the Cemetery Bucket is ideal for any job that requires
straight vertical wall digging at maximum depths. The flat bottom and round back ensure
there is no drag when curled.
36" Cemetery Bucket
Available for: U55-4 / KX057-4
E x ca v a t o r s
8
|
Quick Coupler
Quickly and easily exchange your excavator attachments, all without the use of tools. Quick Couplers
are offered for almost the entire line of Kubota Excavators and maintain the original tip radius as pin-on
buckets for powerful digging forces.
Two hole quick coupler
Excavator Buckets (cont.)
Excellent breakout force for moderate to heavy soil conditions.
Available for: U17 / KX018-4 / U55-4 / KX057-4
Three hole quick coupler
Curl hole and power hole built into quick coupler. Use the curl hole for
increased bucket rotation for truck loading. Use the power hole for
excellent breakout force in tough digging applications.
Available for: U25S / KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / KX080-4
Hydraulic Quick Coupler
The Kubota Konnect® hydraulic quick coupler system allows operators to
easily, quickly, and safely exchange attachments. T-1 steel is used in all
critical wear components to ensure that this coupler has a long operation life.
Hardened bushings are used at all pivot points, as well as hardened pins for
wear and corrosion. Various safety features are incorporated in the coupler
design to ensure safety and positive hook-up. The Kubota Konnect® system is
the most convenient way to speed Kubota excavator attachment changes.
Available for: KX121-3S / KX040-4
E x ca v a t o r s
|
9
A t t ac h m e n t s
E x ca v a t o r s
10
|
Your Kubota Excavator is designed for ultimate performance. The high quality work tools
and accessories offered here are engineered to fit your Kubota Excavator perfectly, and
will take your machine to the next level.
Attachments
Hydraulic Thumb Kit
The Hydraulic Thumb greatly enhances the versatility of your Kubota Excavator. It is excellent for manipulating, handling or loading irregular shaped
objects, debris, rocks, and can even pick up logs. It is custom-designed to
match bucket tip radius and is retractable (out of the way) for trenching.
Available for: U25S / KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / U55-4 / KX057-4 / KX080-4
Hydraulic Breakers
These Hydraulic Breakers are powerful percussion hammers fitted to your
Kubota excavator for demolition and recycling applications. Kubota offers
Hydraulic Breakers for the entire line of excavators.
Available for: K008-3 / U17 / KX018-4 / U25S / KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / U55-4
/ KX057-4 / KX080-4
Flail Brush Shredder
The K4080 is a severe duty brush shredder that has a 1/2" thick cutter drum
with 5/8" ears holding 24 - 2.25 lb. outer knives and 12 - 2lb. inside knives
and does not require a case drain. The integrated thumb saddle is used in
conjunction with the thumb to pick up debris and move obstacles.
Available for: kx080-4
24" Frost Ripper
Available for: U55-4 / KX057-4 / KX080-4
Grading Blade
E x ca v a t o r s
Designed to pre-rip frozen ground or soil, this tool can also break roots,
remove stumps, and rebar. This Frost Ripper features a single point tooth
and a heavy duty riper shank for best penetration. An extra heavy duty upper
gusset helps prevent tooth torque on tough jobs.
Grading Blades are useful for back filling, finishing grade, loose dirt, stone,
and landscape finishing and shaping. The backed cutting edge has a reinforced plate and side wear plates reinforce the edge, blade and rear plate.
The edge features an extra thick cutting edge and a reinforced blade for
longer life.
Available for: KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / KX080-4
|
11
Attachments (cont.)
Solid Tine Grapple
The 36" Pin-On Solid Tine Grapple is an extremely versatile attachment
designed to handle various objects such as brush, rocks, and demolition
debris. This tool features a wide mouth opening for greater range when
grappling brush.
Available for: KX080-4
Excavating Rake
The Excavating Rake is recommended for land clearing, gathering demolition
debris, and sorting material. These Rakes are built with large gussets between
the tines, a steel tube as well as two skins for added strength.
Available for: KX71-3 / KX91-3 / U35-4 / KX121-3 / KX080-4
Rotary Grapple PC025R with Rotator RGP-252
These Rotary Grapples are designed to handle various objects such as brush,
rocks, and demolition debris. They feature a wide mouth opening to grasp
large and spread out debris. Rotary grapples are Allied Approved attachments
Vibratory Compactor
Ho-Pacs are ideal for trench, slope and excavation compaction. Ho-Pacs
compact in densities in excess of 95% Proctor. Ho-Pacs are also used
for compacting waste materials and for breaking up frozen coal. Vibratory
Compactors are Allied Approved attachments
/ KX080-4
E x ca v a t o r s
Compaction Wheel
These Compaction Wheels feature multiple wheels with foot pads staggered
for even compacting in a wide variety of soil conditions. Constructed with
high quality steel with replaceable bearings and wheels, this tool is built to
last and offer years of service.
Hydraulic Auger
All 75 Series hydraulic motor drives the auger through a sealed planetary gear
reduction. The heavy duty all gear design gives these units a long life with
minimal maintenance and service costs. Hydraulic Augers are Allied Approved
attachments
/ KX080-4
12
|
E X C A V A TORS
|
13
C o n t r o l s , C o m f o r t a n d C o n v e n i e n ce
E x ca v a t o r s
14
|
Working with your Kubota may make you feel like a king, but a long day’s work still deserves
a little comfort in the cab. Increase your comfort with Kubota Comfort & Convenience
products. These radios and arm rests help make your Kubota feel like a home away from
home. And the accessories enhance the versatility and productivity of your excavator.
Hydraulic Breaker Accessories
Kubota offers everything you need to work with your new Hydraulic Breaker.
Hose Kits, Quick Attach, and Pin-On Mounting Brackets put you and your
Hydraulic Breaker to work quickly and safely.
Available for: K008-3 / U17 / KX018-4 / U25S / KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / U55-4
/ KX057-4 / KX080-4
Controls, Comfort and Convenience
Bucket Hangers
The bucket hangers are designed to convert a non-Kubota bucket to a
Kubota quick attach bucket. Use these when a customer changes from
another brand bucket and wants to keep the original attachments.
/ KX080-4
Bolt-on Cutting Edges
The Cutting Edge of your Grading Bucket does the detail work. These Bolt-On
Cutting Edges for Grading Buckets are an inexpensive way to strengthen the
cutting edge and prolong the life of your Grading Bucket.
Available for: KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / U55-4 / KX057-4 / KX080-4
Working in extremely dry brush and grass may require the added safety of
a Spark Arrester. Order the Spark Arrestor Muffler as a replacement for the
standard muffler. A Heat Shield (shown attached to the muffler) is required to
complete the package.
Available for: K008-3 / KX71-3 / KX91-3 / U35-4 / KX121-3S
|
E x ca v a t o r s
Spark Arrestor Mufflers
15
Controls, Comfort and Convenience (cont.)
Screen Type Spark Arrestor Muffler
Kubota also offers a Screen Type Spark Arrester for installation in the muffler’s
exhaust pipe for certain excavator models.
Available for: K008-3 / KX018-4 / U25S
Travel Alarms
Get to and from the job site safely with a Travel Alarm Kit. Alert other workers
that your Excavator is on the move.
/ KX080-4
Canopy Light Kits
Extend your work hours on dark days and late nights with a Canopy Light Kit.
The boom light illuminates the bucket area. Canopy Light Kits illuminate the
surrounding area.
Strobe Light Kit
When working in areas where high visibility is required, a Strobe Light Kit is a
great added feature.
Available for: U55-4 / KX057-4 / KX080-4
E x ca v a t o r s
Mirror Kit for Cabs
Use these Mirror Kits to monitor movement of construction vehicles,
equipment, and personnel within the work zone.
Available for: U35-4 / KX040-4 / U55-4 / KX057-4
Block Heater Kits
A Block Heater keeps the engine warm in cold temperatures and helps
improve cold engine starting performance. These Block Heaters are simple to
install and are a reliable and efficient way to pre-heat your engine.
Available for: KX018-4 / U25S / KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / U55-4 / KX057-4
/ KX080-4
16
|
Pre-Cleaner Kits
Heavy dust and other airborne materials can overcome standard air filters. For
severe conditions protect your excavator with an easy to install Precleaner Kit.
Steel Track Kits
Some of our customers are looking for longer track life under operating
conditions such as sharp stones, recycling, and demolition applications.
Steel Tracks are more durable under those conditions, and experience less
damage to the track.
Available for: U25S / KX71-3 / KX91-3 / KX121-3S / KX040-4 / U55-4 / KX057-4 / KX080-4
Wide Steel Tracks / Dozer Blade Extension Kit
Wide Steel Tracks provide better flotation and decreased ground pressure,
reducing damage to sensitive surfaces. Wide Steel Tracks enhance machine
stability as well, especially over the side. Be sure to install the Dozer Blade
Extension Kit so that the blade and track width match.
Additional Counterweight Kit
Use the Additional Weight Kit with Thumb applications in combination with
large loads or heavy attachments.
Used for excavation, demolition, waste handling, construction or demolition
sorting, and scrap handling applications, this front and top operator protective
guard meets the requirements of ISO 10262 1998 Level II Top, Front Guard.
E x ca v a t o r s
Brush Guard Kit
Two-Way Service Port Kit
The K008-3 is equipped with a one-way service port for Hydraulic Breakers.
Enhance the versatility and attachment use of your K008-3 with this Two Way
Service Port Hydraulic Kit to operate an Auger or similar attachment.
Available for: K008-3
|
17
3" Seat Belt Kits
The 3" Seat Belt Kit is a replacement for the 2" seat belt shipped from the
factory. Use the 3" Seat Belt Kit to increase operator comfort and as required
in some states for OSHA compliance.
/ KX080-4
Travel Pedal Kit
For our customers that want to keep their hands on the pilot controls when
operating, install the optional Travel Pedal Kit for foot operation.
Arm Rest Kit
The Arm Rest Kit is for KX080-3 excavators serial number 10000 and below,
and standard equipment on KX080-3 excavators serial number 10001 and
above.
Radios
Enjoy your favorite music or stay tuned to the latest weather forecast with
this outstanding AM/FM/WB Radio with MP3 Port. Most excavators are radio
ready, including speakers and antenna. Check your price book for details.
Available for: KX71-3 / KX91-3 / U35-4 / KX121-3S / KX040-4 / U55-4 / KX057-4 / KX080-4
E x ca v a t o r s
18
|
E X C A V A TORS
|
19
Compact Track Loader
Accessories / Attachments
C o m p ac t T r ack L o ade r s
20
|
The SVL Series are highly capable of any number of tasks and are ideal
for both small and large job applications. Enhance the applications and
opportunities for your Kubota SVL with any number of the accessories and
attachments offered here. Attachments ultimately determine the capabilities of
the machine; the attachments and accessories shown here are match-tested
to withstand the SVL’s high hydraulic power and bucket break out force.
C o m p ac t T r ack L o ade r A cce s s o r i e s / A t t ac h m e n t s
When you chose a Kubota Compact Track
Loader, you chose one of the most versatile
machines you will ever own.
21
B u cke t s / Ma t e r i a l Ha n d l i n g
22
|
Your Kubota Compact Track Loader is an outstanding working tool carrier, capable of
performing a large number of jobs and duties. Expand your applications and increase the
versatility of your Kubota to get the job done quicker and easier with these attachment tools.
Buckets There are 24 models of SVL Buckets to choose from:
» Low Profile (LP) Buckets feature a lower profile design which provides better bucket
corner visibility for the operator.
» Long Floor (Low Profile Long Floor) designs provide better front edge visibility for the operator and
is very popular with landscapers for easy grading.
Buckets / Material Handling
» Short Floor (Low Profile short Floor) offer good visibility and are excellent for tight work areas
heavy lift and break out work.
» High profile buckets have a higher back section and are better suited for light material.
» High Capacity buckets are mostly used for snow removal and for landscapers to handle
bark, sawdust and wood chips or other high volume light materials.
80" High Cap Bucket – w/ Bolt-on Cutting Edge & Bolt-on Side Cutters
Available for: SVL90 + SVL90-2
80" Low Profile Std Floor – w/ Weld-on Teeth & Bolt-on Side Cutters
72" Low Profile Std Floor – w/ Bolt-on Cutting Edge & Bolt-on Side Cutters
Available for: SVL75 + SVL75-2 with wide tracks
68" Low Profile Long Floor – w/ Weld-on Teeth & Bolt-on Side Cutters
|
23
Buckets / Material Handling (cont.)
Side Cutter Kit
(Left and Right - fits all 68", 72", 80" Buckets)
These Bolt On Side Cutters (BOSC) greatly extend bucket service life and
improve penetration power into hard packed soil or stock piled materials.
BOSC’s are a standard feature on Kubota’s buckets and their major purpose
is to extend service life of the bucket corners and reduce downtime for
costly rebuilds.
Available for: SVL75 + SVL75-2 / SVL90 + SVL90-2
48" Pallet Fork
Enhance the versatility of your Kubota Compact Track Loader with a set of
Pallet Forks; giving your SVL the capabilities of a rough terrain fork lift. Pallet
Forks with standard 48" forks are rated at 5500 LB : A special feature of
Kubota Pallet Forks is the “D-ring”, which is a tie down ring to secure or pull
a load. Consult your Operator Manual for load limitations and Fork ROC.
Construction 4-in-1 Bucket w/ Bolt-on Cutting Edge
Loading operations are improved dramatically with this 4-N-1 Bucket simply
through the ability to “bottom dump” the bucket. Track loaders are designed
to keep loads as close to the center of gravity of the loader as possible for
safety and stability and as a side effect are often unable to dump a standard
general purpose bucket into a truck or trailer with high sides. With a 4-N-1
Bucket, if you can reach over the side you can load it by simply using the bottom dump. There are many other tasks you can accomplish with this versatile
4-N-1 Bucket from dozing gravel or dirt for precise grading operations,
loading, back dragging, back filling, clamping, lifting and scraping
High Volume Heavy Duty Snow Bucket
This 108" High Volume Snow Bucket is specially designed for maximum
efficiency and increased capacity when loading light, loosely-packed
materials such as snow. Very popular with Landscapers for handling bark
or woodchips or light weight high volume materials. Only available with a
straight bolt on edge.
24
Side Discharge Bucket
72" Side Discharge Bucket is available for the SVL75 and SVL90. Used for
trench bottom bedding for pipes or cable protection, foundation footing
backfill, highway drainage systems, feed lots, and many more applications.
|
Concrete Claw
This quality product is designed to pry, cut, tear and rip through concrete
slabs. It is made to get under concrete slabs and tear them out while leaving
them largely in tact so the claw can carry the slab away.
Grapples There are 4 styles of SVL Grapple Buckets to choose from:
Buckets / Material Handling (cont.)
Utility Brush Grapples / Utility Scrap Grapples / Construction Brush Grapples / Construction Scrap Grapples
Construction grapple buckets are Heavy Duty built and the Utility grapples are Medium Duty. They all handle
irregularly shaped loads, brush and loose materials. They are an essential tool for demolition, sorting,
clean up and reprocessing work. A standard equalizer valve assures equal clamping force on the grapples.
72" Utility Brush Grapple
The Brush Grapple is designed to handle brush and debris and is ideal for
clearing fields and landscaping. Brush grapples have an open floor where
sand and dirt can fall through. Utility Brush Grapples are mostly used for job
site clean up.
Utility Scrap Grapple
72" Utility Scrap Grapple
Scrap grapples have a closed floor and do have closed grapples vs. the brush
grapples which have an open structure.
78" Construction Brush Grapple
The Brush Grapple is designed to handle brush and debris and is ideal for
clearing fields and landscaping. Brush grapples have an open floor where
sand and dirt can fall through.
Construction Brush Grapple
Scrap grapples have a closed floor and do have closed grapples vs. the brush
grapples which have an open structure.
|
78" Construction SCRAP Grapple
25
M u l t i - U s e A t t ac h m e n t s
26
|
Attachments like Augers, Rotary Cutters, Brush Cutters and Street Sweepers are being
used in a wide variety of applications and industries. Augers are used by professional
contractors for fence and powerpole installation. Angle brooms are designed to clean
streets and roadways, but frequently used in fresh snow removal—the majority of attachments are used for multiple applications. We dare to say that your limitation is your own
imagination—the SVL is a versatile tool to add incremental business.
Multi-Use Attachments
Auger Drive with 2" Hex connector
Three models available from 15 to 30 GPM.
Auger Bits
Auger Bits come in a variety of sizes and models according to their application: boring in hard packed clay or boring into ice or rock requires different
cutterbit styles and flight angle. Flight thickness will vary significantly too. The
center tube is made of thick wall high tensile steel. A special tapered auger bit
is available to dig receiving holes for planting trees and is very popular with
Landscapers. All auger bits have replaceable cutter bits.
|
27
Multi Use Attachments (cont.)
Rotary Cutter – “Land SHark”
Rotary Cutters are used for clearing grass and wild growth from highway
medians and utility easements as well as land clearing for housing, parks and
recreation areas.
72" Rotary Cutter » Standard Flow is equipped with 2-blades and available
for the SVL75 and SVL90.
78" Rotary Cutter » High Flow is equipped with 3 blades and available for
the SVL90.
Available for: SVL75 + SVL75-2 / SVL90 + SVL-90-2 / SVL90F + SVL90-2F
84" SBB Hopper Sweeper
The container behind the brush collects all debris and can be emptied when
full. Optional water tank available for dust control for both SVL’s. Quick
Change (QC) of Brush set is a standard feature. Curb brush is optional.
84" VRS Pick-up Sweepster
Excellent for street, curb, and gutter clean-up, parks, recreation areas and
utility work site clean-up. The container behind the brush collects all debris
and can be emptied when full. Optional water tank available for dust control
for both SVL’s. A Quick Change (QC) of Brush set is a standard feature.
84" QCSS Angle Broom Std Flow, Manual Angle
Angle Brooms are ideal for haul road sweeping & clearing and moving, small
loose materials, perfect for streets, drives, and job site clean-up. Often used
for fresh snow removal. Optional water tank available for dust control for both
SVL’s. A Quick Change (QC) of Brush set is a standard feature and a Hydraulic Angle Kit is optional too.
28
|
Geun
M
le
t ir- a
Uls eE xAca
t t ac
v a thomre n
At t
s ac h m e n t s
EX
A TORS
C
oC
mApVac
t T r ack L o ade r s
29
|
La n d s ca p e A t t ac h m e n t s
30
|
Many SVL operators do municipal and commercial landscape work, while others may
be involved in horticultural or other industries. They appreciate the machine's overall
versatility along with smooth loader controls, simplicity of operation, great visibility and
low maintenance.
Power Rake
Ideal for clearing and preparing soil in general construction, trench backfill
restoration, golf course construction and athletic field maintenance and for
soil preparation before laying sod. They offer the versatility to remove old
lawns and weeds, grade, level, rake, remove debris and prepare seedbeds
with one work tool. Its angling ability allows the operator to windrow collected
debris for easy pickup and removal.
Landscape Attachments
Soil Preparator
76" Soil Preparator is ideal for tilling and fluffing soil while removing rocks and
debris at the same time and collecting those in the bucket behind the rake
and all debris can be dumped when full.
AutoRake
A versatile landscaping tool, this 84" Auto Rake is ideal for pushing debris
2" and larger. No landscaper should be without one.
Land Developers, Landscapers and Tree Farmers that need to move young
trees with their root ball wrapped in burlap will find the quality and versatility
of this Tree Fork to be an outstanding value.
Tree Scoop
This quality Tree Scoop is capable of transplanting trees and bushes, removing rocks or stumps, and can even assist in setting stones in retaining walls.
|
Tree Forks
31
Landscape Attachments (cont.)
Tree Spade
Dig and transplant trees with speed and efficiency with this Tree Spade
attachment for your Kubota. This is the ideal attachment for many applications such as nurseries, landscapers, golf courses, construction, farming,
rental yards, Christmas tree farmers, parks and recreation. Note there are
different sizes and blade styles available for different soil conditions consult
your dealer for correct application.
Root Rake
Designed to rip up surface roots, and young wild growth, then push everything
into one big pile for disposal. Very popular with land clearing contractors.
Post Hole Driver
A Post Driver makes setting posts quick, easy and with solid results. The use
of a Tilt Attach is recommended when used on hill sides and slopes.
66" Tiller (STD Flow)
Tillers are designed for breaking up and pulverizing soil, mixing compost or
other materials into existing soil, and stabilizing and leveling existing terrain
in landscape finish applications. They are ideal for residential, commercial,
agricultural, building construction, lawn care and golf course maintenance
applications.
32
|
Ge n
La
nd
es
r ca
a l pEex ca
A t tvac
at o
hm
r eAnt tt s
ac h m e n t s
EX
A TORS
C
oC
mApVac
33
|
C o n s t r u c t i o n A t t ac h m e n t s
34
|
Regardless of the size of your project, there is always a need for a compact track loader.
The SVL is the machine of choice for many applications. From moving material to confined
excavating to breaking out foundations and rock, Kubota SVL compact track loaders
have the power and attachments to get it all done.
Hammer
Hydraulic Breaker. The KBX560Q hammer is available for the SVL75 and
SVL90. Note: it is required to use a door with Polycarbonate glass when using
a hammer/breaker.
Construction Attachments
Requires: Special Application Door
Hammer Mounting Bracket
Hydraulic Breaker Bracket. A Heavy Duty mounting bracket is available for the
KBX560Q hammer/breaker for both SVL’s.
Requires: Hammer (KBX5650Q)
Water Tank and mounting frame, with 12V pump
This 30 gallon Water Tank Kit is ideal for dust control on Brooms and Sweepers or cooling for your Cold Planer cutter tips. The Kit includes a 12V pump
and a HD frame which mounts to existing mounting points in the roof.
Dozer Blade
Vibratory Roller (Padded & Smooth Drum)
The VRP84 Vibratory Roller is the ideal attachment for driveway and parking
lot preparation, soil compaction where landscapers and paving contractors
are its main users.
|
Dozer Blades are designed for rough and finish grading in dirt and gravel, and
light dozing. With their angle & tilt capabilities, dozer blades are better suited
for finish grade work in golf course construction and landscaping applications. The 84" Dozer Blade is available for the SVL75 and SVL90. The 96"
Dozer Blade is available for the SVL90.
35
Construction Attachments (cont.)
Tilt Attach
This Tilt Attach allows you to make a nice swale or mound with your bucket
and is ideal for golf course work. Tilt Attach’s are also recommended when
trenching on slopes and hill sides, in order to maintain a vertical trench reducing the chance of cave-ins. Post Drivers will work better with Tilt Attach’s to
secure a vertical post on hill sides and slopes.
Skid Swing Hoe
Skid Swing Hoe will make a small excavator from your SVL — with all the
comfort and safety of working from inside the cab.
Trencher
Trenchers are designed for cutting narrow straight trenches in the soil prior
to laying electrical, telephone and cable lines, or sewer, water and gas pipe.
Trenchers are used in residential, commercial, agricultural, building construction, and golf course maintenance.
Trencher » Standard Flow with 36" or 48" Boom and 6" Chain are available
for the SVL75 and SVL90.
Trencher » High Flow with 36" or 48" Boom and 6" Chain are available for
the SVL90.
Since there are a wide variety of digging chain configurations available for
different soil conditions, we advise you to consult your dealer for details.
Available for: SVL75 + Svl75-2 / SVL90 + SVL90-2 / SVL90F + SVL90-2F
Rock Saw
Rock Saws are designed for high performance trench cutting on a variety of
hard or compacted surfaces such as asphalt, reinforced concrete, and rocky
or frozen ground.
36
Available for: SVL90F + SVL90-2F
Cold Planer
A Cold Planer is ideal for grinding concrete and asphalt in preparation for a
new overlay. Optional water tank with pump is recommended for cutter bit
cooling and dust control.
|
Ge
C
on
ne
sr
ta
rl
u cEtxica
o nv a
At o
t ac
r Ahtmt e
ac
n thsm e n t s
EX
A TORS
C
oC
mApVac
37
|
S n o w A t t ac h m e n t s
38
|
Not only in northern states does it snow anymore, high elevations and pre and post
season storms across the plains can call for the expedited and safe removal of snow.
SVL attachments for snow removal fulfill every need, from snow blowing to removal and
sweeping, Kubota has the solution.
S n o w A t t ac h m e n t s
Snow Attachments
Snow Blower
Snow Blowers are designed for removing snow from streets, parking lots, driveways and sidewalks, making
them ideal for various winter cleanup and maintenance duties. These Snow Blowers can rotate the shute and
deflector angle to adapt to varying conditions.
84" Snow Blower (STD Flow)
84" Snow Blower (High Flow)
High Volume Heavy Duty Snow Bucket
This 108" High Volume Snow Bucket is specially designed for maximum
efficiency and increased capacity when loading light, loosely-packed
materials such as snow. Very popular with Landscapers for handling bark
or woodchips or light weight high volume materials. Only available with a
straight bolt on edge.
96" Snow Blade
|
This 96" Snow Blade is ideal for cleaning parking lots and drive-ways and is
equipped with a trip system to avoid blade damage when hitting a curb or
manhole cover. Available for the SVL75 and SVL90.
39
A C C E SSORI E S
40
|
Accessories for the SVL can make your job easier. Be more visible, give you a smoother
ride or keep you more secure to comply with local regulations. These accessories are
matched for both SVL’s.
A C C E SSORI E S
Accessories
Radio
Includes: 2 speakers, 1 antenna and mounting kit. Available since October 1,
a radio will be a Dealer installed option.
Hose Stay
Keep your accessory or attachment hoses organized and safe with this Hose
Guide Bracket.
Special Application Tilt-Up Door for factory cab
(Built by KBT)
This high quality Tilt-Up Door features tough polycarbonate-glass to protect
the operator from flying debris. It is required when using a hammer/breaker.
Available for: SVL75 + SVL75-2 / SVL90 + SVL90-2 for factory cab
14-Pin Connector for attachment control
Control Handle for 14-Pin
In order to control multifunctional attachments, up to 6 functions, an additional control handle can be added to the Left Hand joy stick. One on-off
switch and 6 momentary switches with 8 wires allow you to use your old or
existing attachments with the common 14-pin connector. Kit comes with
14-pin pre-wired connector.
|
The industry standard 14-Pin connector is an option and is used to control
2-functions on an attachment. The 4-wire system is using industry standard
connector numbers.
41
A cce s s o r i e s
Accessories (cont.)
Engine Bonnet Lock Kit
Engine compartment door can be locked with this optional key-lock.
Radiator Screen Kit
The radiator screen reduces downtime for radiator cleaning as it can be
pulled out on regular intervals to remove leaves and other debris that would
otherwise collect between the cooling fan and the radiator. The radiator needs
to be pulled forward to access the screen.
Engine Block Heater
A Block Heater keeps the engine warm in cold temperatures and helps
eliminate cold start engine damage. These Block Heaters are simple to install
and are a reliable and efficient way to pre-heat your engine block.
Retractable Seat Belt 3" wide
The 3" Seat Belt Kit is a replacement for the 2" seat belt shipped from the
factory. Use the 3" Seat Belt kit to increase operator comfort and as required
in some states for OSHA compliance.
42
Air Ride Seat Suspension Kit
This Air Ride seat Suspension Kit provides the operator with ultimate comfort
when working on uneven terrain.
Red Tail Light Kit
Tail Lights are required by law in some states if you plan on operating on
public roads.
|
Strobe Light Kit
When working in cities and areas with a lot of foot traffic a Strobe Light Kit is
a great added safety feature. Consumes ½ Amps.
A cce s s o r i e s
Accessories (cont.)
Rotating Beacon Light Kit
When working in cities and areas with a lot of foot traffic a Rotary Beacon
Light Kit is a great added safety feature. Consumes 5 Amps.
Rear View Mirror
For added rear visibility.
Spark Arrestor Muffler
(not required on the Dash-2 machines)
Spark arrestor mufflers are required by some State Parks and recommended
when working in areas with light combustable materials like trash transfer stations, inside hay barns or similar situations. However, the new dash-2 SVL’s
do not require a Spark Arrestor as the DPF is recognized as a spark arrestor.
Available for: SVL75 / SVL90
Requires S6688 insolation kit.
Heat Insulation Kit
(required for the S6675 Spark Arrestor Muffler)
Heat insolation kit is required when using the S6675 Spark Arrestor
Available for: SVL75 / SVL90
|
43
E N C LOSUR E K ITS
44
|
Enclosure kits transform your open ROPS SVL machine into one with a full cab. They
are also available in separate components to keep out wind, rain and dust. The most
popular component of the kit are the side windows as they afford the most protection
from weather. The heater kit can also be used separately. The entry door swings outward
and is equipped with a release handle to separate the window from the steel door in
case of attachment blockage.
E N C LOSUR E K ITS
ENCLOSURE KITS (for ROPS models only)
Swing Door Kit
This Swing Door Kit features Quick Release glass which allows the operator to easily exit the Compact Track
Loader when needed in case the position of the attachment does not allow the swing door to open, or when
a fallen tree branch blocks the door.
Special Application Swing Door - Polycarbonate
(includes quick release handles) Required for the use of hammer/breaker.
SPECIAL APPLICATION Swing Door Kit w/ frame and wiper
Front Swing Door Kit with Quick Release and Tempered Glass.
Sliding Side Window Kit
Sliding Side Windows allow the operator to close the cab during cold weather
or open up the windows for venting when it’s warm.
Cab Heat Kit for ROPS with Door and Side Window Kit. Working in the cold is
made comfortable and efficient with this Cab Heat Kit.
Windshield Washer Bottle Kit
Wash away dust and mud for a clear field of vision with this Front Window
Washer Kit for the Swing Door.
|
Heater Kit
45
E N C LOSUR E K ITS
Enclosure Kits (cont.)
Circulation Fan Kit
Circulate the air inside the enclosed cab kit, with this easy to install Circulating Fan Kit.
Mounting Plate Kit
Mount Bracket for Magnetic Bases with Control Handles.
46
|
www.kubota.com
1001CEA - Date 12/2013 Construction Equipment Brochure
© 2013 Kubota Tractor Corporation.

Kubota 2013-14 Construction Equipment Attachments Catalog

Transcription

Similar documents

Where you come to know.

Johnny Tremain by Esther Forbes Objectives

KEEPIN` IT COUNTRY with Alan Jackson

official press kit 2015

MT55 | Mini Tracked Loaders

ckc- St. LOUIS EXHIBITOR COUPONS 2016

45 Plateau Incentive Program

Euro-Diagnostic Resources, Inc. Euro Auto Training

Soil Pulverizer Pallet Forks 3pt Tillers No

NAMURA TECHNOLOGIES NEW PRODUCT RELEASE