Click to Underlays brochure

Transcription

Click to Underlays brochure

Acoustic White Underlay
PAGE 2

Fibreboard
PAGE 3

Comfort Gold & Silver Foam Underlay
PAGE 4 – 5

Timbertech Rubber Underlay
PAGE 6

Carpenter Underlays
PAGE 7 - 10

Damtec Acoustic Underlays
PAGE 11 - 12

Floor 2 Floor Range
PAGE 13 - 15

Stair Trims
PAGE 16

Accessories
PAGE 17 - 18

Adhesives
PAGE 19 - 22

Also From Laydex
PAGE 23
ACOUSTIC WHITE
100% recyclable closed cell polythene foam underlay; for laminate, engineered and solid wood; domestic installations.
Top value for money
wood underlay!










Page 2
Thermal insulation
Impact and airborne sound
insulation
Shock insulation
Takes out unevenness in the
subfloor
Supports and protects
Increases the serviceability life of
the floor covering
Dust free
Lightweight - easy to lift and
manoeuvre
Quick and easy to cut and install
Eco friendly
REF
SIZE
THICKNESS
510771
25m x 1m
2mm
320701
100m x 1m
3mm
FIBREBOARD
Natural wood fibre insulating panels;
for laminate, engineered and solid
wood; domestic installations.











Page 3
Eliminates considerable unevenness
in the subfloor
Traditional material
Firm and stable support and
protection
Increases the serviceable life of the
floor covering
High weight resistance
Exceptional thermal insulation
Impact and airborne sound
insulation
Shock insulation
Lightweight - easy to lift and
manoeuvre
Quick and easy to install
Eco-friendly composition
REF
SIZE
THICKNESS
690018
7.02m² per pack
5.5mm
COMFORT GOLD
Dense closed cell polythene foam
underlay with a gold vapour barrier film
on one side and overlap; for laminate,
engineered and solid wood; domestic
installations.














Page 4
Metallised gold vapour barrier film
protects against moisture migration
from the subfloor
Overlap
High density
Extra thick cushioning
High resistance to puncture
Thermal insulation
Impact and airborne sound insulation
Shock insulation
Takes out unevenness in the subfloor
Long term support and protection
increases the serviceable life of the
floor covering
Dust free
Lightweight, easy to lift and manoeuvre
Quick and easy to cut and install
Eco-friendly
REF
SIZE
THICKNESS
510776
15m x 1m
5mm
COMFORT SILVER
Our Comfort range are engineered to reduce the
excess sound in wood and laminate floors.
Described as a cost effective solution, this
closed cell polythene foam underlay with a
silver vapour barrier film on one side and
overlap; for laminate, engineered and solid
wood; domestic installations. Comfort Silver
underlay give sound absorption and cushioning
support.
Our products do not generate any dust, are
non-toxic, help to absorb minor floor
imperfections and are CFC and HCFC free.

Overlap

High density

Extra thick cushioning

High resistance to puncture

Thermal insulation

Impact and airborne sound insulation

Shock insulation

Takes out unevenness in the subfloor

Long term support and protection increase
the serviceable life of the floor covering

Dust free

Lightweight, easy to lift and manoeuvre

Quick and easy to cut and install

Eco-friendly
Page 5
REF
SIZE
THICKNESS
320677
15m x 1m
3mm
TIMBERTECH
One of the highest quality heavy duty,
ultra high density, natural rubber
underlay with a silver vapour barrier
film and backing fleece; for laminate,
engineered and solid wood; domestic
and contract installations.




Page 6
Laminated with silver vapour barrier
film - protects against moisture
migration from sub floor
Backing fleece on one side
Ultra heavy mass stability and
enhanced stay-put quality
Superior sound energy absorption
and performance properties
REF
SIZE
THICKNESS
690017
10m x 1m
2mm
690007
10m x 1m
3mm
CARPENTER
Carpenter underlay's deliver
lasting luxury and comfort and
are guaranteed for the lifetime of
the carpet. They are recycled
from unused trim generated by
furniture, bedding and
automotive industries and are 100
% recyclable. Carpenter underlay's are permeable and can be
laid over a wood block floor.












Page 7
High Density
Excellent durability
Exceptional resilience - retains
it bounce-back ability (far
more than typical sponge
rubber underlay)
Luxurious underfoot comfort
High thermal insulation
Excellent impact and
airborne sound insulation
Shock insulation
Long life performance
Flame retardant
Lightweight
Quick and easy to install
Eco-friendly
CARPENTER
GREEN STEP
Classified to BS 5808 General
Domestic Use
Density 75Kg/m³
Impact sound insulation: 34dB
Thermal insulation: 2.13 Tog
Suitable for stretch fit installations





REF
SIZE
THICKNESS
365945
11m x 1.37m
(15.07m²)
8mm
SUPER GREEN STEP





Classified to BS 5808 Luxury use
Density 75Kg/m³
Decible Reduction Delta Lw:38dB
Thermal insulation: 2.47 Tog
Suitable for stretch fit installations
REF
SIZE
THICKNESS
608043
11m x 1.37m
(15.07m²)
10mm
Page 8
CARPENTER
DEEP STEP





Classified to BS 5808 Luxury Use
Suitable for stretch fit installations
Density: 100 Kg/m³
Thermal Insulation: 3.1 Tog
Impact Sound Insulation: 44 dB
REF
SIZE
THICKNESS
339835
11m x 1.37m
(15.07m²)
11mm
FIRM STEP





Page 9
Classified to BS 5808 Heavy Contract Use
Suitable for stretch fit installations
Density 145Kg/m³
Impact sound insulation: 36dB
Thermal Insulations: 2.3 Tog
REF
SIZE
THICKNESS
339836
11m x 1.37m
(15.07m²)
7mm
CARPENTER
EXTRA STEP






Classified to BS 5808 Heavy Contract Use
Suitable for stretch fit and double stick
installations
Density 180Kg/m³
Impact sound insulation: 33dB
Thermal Insulations: 1.77 Tog
High flame retardancy
REF
SIZE
THICKNESS
632480
11m x 1.37m
(15.07m²)
6mm
ULTRA STEP
Classified to BS 5808 Luxury Use
Suitable for stretch fit and double stick
installations
Density 180Kg/m³
Impact sound insulation: 40dB
Thermal Insulations: 2.51 Tog





REF
SIZE
THICKNESS
632427
11m x 1.37m
(15.07m²)
9mm
Page 10
DAMTEC STANDARD
This underlay can be used under parquet, laminate, carpeting and ceramic tiles it also
reduces unwanted noise within your own four walls and those of your neighbours as well.
DAMTEC® standard may be laid loose or glued, according to the application and
requirements. DAMTEC® standard ensures a pleasant work or residential environment
and is well suited for use in a wide range of applications. Material: Fine granules of
recycled rubber and cork with PU elastomer bonding agent.




Volumetric weight: approx. 700 kg/m³
Temperature resistance: -30° bis 80°C
Fire resistance
Impact sound improvement: (ISO 140‐8/ISO 717‐2)
29 dB under textile flooring
20 dB under 8 mm laminate flooring
19 dB under 13 mm parquetry
18 dB under 16 mm solid wood
51dB under tiles
Page 11
REF
SIZE
THICKNESS
690080
20m x 1m
3mm
DAMTEC COLOUR
DAMTEC® colour G is grinded on one side and with its special selection of raw
materials excellent below linoleum and PVC flooring. Its plasticizer-free formulation,
which prevents softener migration and floor finish discoloration, as well as its grinded
surface eliminate the need for a separating layer between the underlay and the floor
covering. With its mixture from natural raw materials – rubber and cork – DAMTEC®
colour G is an excellent insulating underlay for floors in residential and other buildings.
DAMTEC® colour without grinded surface is also suitable under parquetry and
laminate floors as well as under textile floors. Material: High-quality granules of
recycled rubber and cork with PU elastomer bonding agent






Colour: multi-coloured
Surface: granular texture
Volumetric weight: approx. 650 kg/m³
Temperature resistance: -30° bis 80°C
Fire resistance
Impact sound improvement: (ISO 140‐8/ISO 717‐2)
24 dB under textile flooring
19 dB under PVC-flooring
16 dB under linoleum
REF
18dB under solid wood
690081
Page 12
SIZE
THICKNESS
30m x 1m
2mm

A range of premium quality Plaza
Profiles with variants for every
floor covering and every
application.

Standard Profiles

Standard Heavy Duty & Raised
Base Profiles

Self Adhesive Profiles

Specialist Trims for Carpet &
Linoleum

Specialist Trims for Laminate

Standard DIY Profiles

Woodfix Self Adhesive Profiles

Multifix Profiles

Multifix Base Systems

Slim Line Stair Nosings

Heavy Duty Stair Nosings

Stair Nosings – Edging Trims
Can’t see your profile
here, call our office
for more profiles!
Page 13
PROFILES & NOSINGS
Single Edge Trim
Conceals and protects the carpet edge.
Available in silver & gold.
Screw down.
Dual Edge Trim
Conceals and protects the joints
between two carpets. Available in
Silver & gold. Screw down.
Cover Strip
Provides covering and protection for
a wide variety of floor coverings.
Available in silver & gold. Screw &
stick down.
Ramp Edge
Provides a smooth transition down to
resilient floor coverings. Available in
silver & gold. Stick down.
Z Bar
Gives a smooth transition between
laminate and carpet. Available in silver
& gold. Screw down.
Vinyl Edge
Conceals and protects the edge of
vinyl floor covering. Available in
silver & gold. Screw down.
Flexi Edge
It can be used as an edge trim on the
vertical with wall tiles or on the
horizontal with Floor tiles or even as a feature strip in wall or floor applications.
Angle Edge
Conceals and protects the edge of
wooden floor covering. Available in
silver & gold. Stick down.
Page 14
Solid Wood Square Edge
Solid Wood Floor to Tile/Carpet
Solid Wood T Section
Solid Wood Reducer
Scotia
Solid Wood Skirting
Solid Wood Flooring
Available in White Oak 90mm &
120mm
Red Oak 90mm & 120mm .
Grades A, B & C.
Page 15
STAIR TRIMS
Bull Nose
Straight Edge
Double Insert
Rake Back
Kinked Face
For Our Full Range of
Nosing’s & Trims
Contact our Office!
Page 16
ACCESSORIES
Grinding Blocks
Adhesive Trowel
DPM 250mu & 300mu
Building Paper
Hand Scraper
Spiked Roller
Gripper Rods
Page 17
Chalk Line
ACCESSORIES
Napping Shears
Large Measuring Tape
Kicker
Carpet Cutter
Large Shears
Dolphin Knife
Heat Seaming Tape
3 Piece Set
Page 18
ADHESIVES
SPRAY ADHESIVE
A high strength spray adhesive for bonding carpet tiles and non
structural applications. Gives exceptionally strong adhesion for a wide
range of demanding uses. Fitted with a variable discharge spray that
controls the width of the fan. DCM free.
CONTACT ADHESIVE
A premium grade, solvent-based, neoprene adhesive with high grab
and long open time to enable re-positioning. This product is
toluene-free! Can be used for bonding to cork, leather, rubber, metals, wood, chipboard, hardboard, laminated plastics, dense textiles, plaster, stone, concrete, cementitious screeds and smoothing
compounds. It will bond rigid PVC and sheets but the materials
should be checked for suitability prior to application as plasticiser
migration can occur in some instances. Note: This product is not
suitable for polystyrene, polythene, polypropylene, silicone rubbers,
bitumen or PTFE. The solvent in the contact adhesive may attack
certain painted or lacquered surfaces. Test a small area of adhesive
on the surfaces prior to full application.
CONTACT SPRAY ADHESIVE
Contact Adhesive in an Aerosol. Not to be confused with Standard Carpet
or Multi Purpose Adhesive. The fir st product from the new gener ation of synthetic rubber/resin adhesives. Its high solids/ low solvent
formula produces a quicker, stronger, more aggressive bonding system
which out performs all conventional aerosol adhesives
Ideal for bonding laminates, carpets, carpet tiles, most vinyl floor
coverings, fabrics, foams and felts, pvc skirtings and much more.
CONTACT SPRAY ADHESIVE ~ STAY-FIXT
A multi purpose contact adhesive supplied in
either a 500ml aerosol or a 17kg pressurised
container which is linked through a 3.5 or 5 metre
hose to a spray gun, this provides an easy to use,
portable, time saving adhesive spray system. Can
be used in a wide range of applications. Suitable
for use with carpet, carpet tiles, linoleum, vinyl,
laminates, fabrics, foams, felt, cardboard, paper,
rubber, polythene and most plastics.
Page 19
ADHESIVES
LX16 WOOD ADHESIVE
A solvent based, heavy duty, interior adhesive for bonding all types
of wood flooring. Ideal for use where the nature of the wood flooring
makes it particularly prone to warping when bonded with a
waterborne adhesive. Easy to spread with a high shear strength and
short open time. Suitable for use on parquet flooring, woodblock and
wood strip to most common substrates. Can be used with underfloor
heating systems
DUO WOOD GLUE
Designed as a one-pack ready-to-use adhesive which gives a fast rate
of bond strength development. Suitable for hard and soft woods, decorative laminates, chipboard blockwood and other engineered timber
panels. Can be used in applications where joints may be subjected
to short term water contact or exposure to high humidity.
PU5 ADHESIVE
One-part moisture cure polyurethane adhesives specially formulated
for waterproofing bonding. These products are seawater proof and
are resistant to acid and chemicals. A solvent-free, rapid setting thixotropic translucent PU gel which sets in 5 minutes. Excellent bonding properties suitable for all wood products including garden furniture, staircases, boats, sandwich panels and insulation materials to
most common substrates. Suitable for interior and exterior
applications.
GRIPBOND GREEN GRAB
A multi-purpose, synthetic rubber based construction adhesive that
can replace mechanical fixings in a wide variety of domestic,
commercial and industrial applications. A fast bonding,
non
-slumping, instant grab adhesive with good gap-filling properties
even on uneven surfaces. It can be used in all weather conditions
and is suitable for rough and porous surfaces. It can also be over
-painted once dry. Bridges gaps up to 10mm. Ideal for fixing a wide
variety of materials. It can be used to fix skirting boards, door surrounds and frames, window sills, all types of cladding, wall battens, decorative wall boards, metal carpet edges, automotive trims
and much more. It can be used for interior and exterior
applications. NOTE: this product is Toluene free!
Page 20
ADHESIVES
PSA
Pressure Sensitive Adhesive. A premium grade pressure sensitive,
solvent free, acrylic adhesive for use with resilient floor coverings. It
is non staining, has excellent resistance to plasticiser migration and
may be applied by either trowel or roller. Bond It PSA is
recommended for installing PVC, vinyl sheet and tiles and other
vinyl backed floor coverings, cushion floor, PVC backed carpet,
Polyurethane foam gel carpet, including impervious backing.
CARPET TILE TACKIFIER (CTT)
CTT is a solvent-free, acrylic emulsion formulated to provide a
permanently tacky film for the removable fixing of loose lay carpet
tiles. This enables the tiles to be easily lifted and replaced when
required. The adhesive in non-staining, resistant to plasticiser
migration and may be applied by either roller or brush.
FLOORBOND GPA
A solvent-free, high tack carpet adhesive with anti-macrobacterial
protection. Fast grab - strong final bond strength, suitable over most
underfloor heating systems. Will bond the majority of carpets
including, backings of foam, actionbac, felt back, jute back, latex
unitary back, needle-punch but NOT for use with PVC back carpet.
It may also be used to bond both rigid and semi-flexible vinyl tiles
but NOT fully flexible vinyl's.
MPA
Multi-Purpose Acrylic. A light coloured, solvent-free, acrylic
emulsion adhesive. The adhesive has a long open time with early
tack development, is non staining and has excellent resistance to
plasticiser migration. Bond It MPA is a recommend for installing
vinyl sheet and tile coverings, cushion floor, PVC and PU foam
backed carpets, the majority of other carpets and needle punch /
fibre bonded carpets. Please check with Technical Service for
compatible products. Suitable for use over most underfloor heating
systems.
Page 21
ADHESIVES
TS 550
A permanently flexible, one part, ready-to-use, moisture cure,
internal wood flooring adhesive. Free from silicone, solvent,
isocyanates and water. Based on hybrid polymer technology it
reduces the risk of warping or deforming the wood flooring due to its
moisture and solvent free composition. It features: Quick cure and
rapid bond strength, permanently elastic, suitable for use with
underfloor heating. For the internal bonding of parquet, mosaic, oak,
wood block, laminated, exotic timber and many other wood floor
types to porous or non porous substrates including screeds,
chipboard, plywood, concrete and anhydrite.
UNITEC
Solvent-free dispersion adhesive
suitable for bonding of textile coverings with e.g. synthetic backing,
needlefelt, natural fibre coverings with backing as well as linoleum,
PVC and CV floor coverings on suitable absorbent substrates in
interior areas.
EMI CLASSIC
A truly multi-purpose, pressure sensitive, acrylic dispersion
floorcovering adhesive. Suitable for probably 97% of all
floorcoverings onto porous or non-porous sub-floors. Emiclassic
will bond PVC, Designer PVC, Linoleum sheet, rubber up to 4mm
thickness, cushioned vinyl, carpets and has recommendation by
major floorcovering manufacturers. It is completely solvent-free and
has low odour making it ideal for sensitive installations. It has a
good bond strength, rapid curing properties, and requires only a
short open time. Carries EC1 rating for very low emissions. It is
suitable for bonding textile wall and floor coverings, woven fabrics,
needlepunch, PVC, vinyl, lino, cork and synthetic rubber coverings.
This product in certain circumstances can be laid over old
floorcoverings - consult our technical department for further
information. It is suitable for use with underfloor heating systems
and has been tested for use with castor wheel loading.
SOLVENT CLEANER
Special blend of solvents formulated to quickly remove spillages of
oil, grease, and adhesive from most surfaces, including carpets,
fabrics and trims. Ideal for removing adhesive overspray from
skirting boards, walls, doors etc.
Page 22
Laydex Ltd
4/5 Falcon Way
Belfast
BT12 6SQ
Telephone: 02890 382223
Fax: 028 90038 2230
Email: [email protected]