Cross Reference Chart - Couplamatic Systems Inc.

Transcription

Cross Reference Chart - Couplamatic Systems Inc.
R
Section A - Bulk Hose.
SAE 100R1AT Thin Cover Domestic............................A-1
DIN 1SN / SAE 100R1AT Thin Cover...........................A-1
SAE 100R2AT Thin Cover Import & Domestic.............A-2
DIN 2SN / 100R2AT Thin Cover....................................A-2
2SK Extreme Pressure Hose, Exceeds 2SN/2SC............A-3
SAE 100R16 (Import).....................................................A-3
ULTRA R16 High/Low Temp 100R16/2SC...................A-4
SAE 100R17(Import).....................................................A-4
HY-PLUS I (1 Wire 3000 PSI WP)................................A-5
HY-PLUS III (2 Wire High Pressure, High Flexibility)..A-5
Dura-Hyd Abrasion Resistant R17 & R16/2SC...........A-6
Dura-Hyd EX Super Abrasion Resistant R16/2SC.........A-6
Jack Hose 10,000 PSI WP...............................................A-7
SAE 100R3.....................................................................A-7
SAE 100R4.....................................................................A-7
SAE 100R5 ....................................................................A-8
SAE 100R5 Hi-Temp......................................................A-8
SAE 100R6.....................................................................A-9
100R7 Reduced OD Thermoplastic................................A-9
100R7 Reduced OD Thermoplastic Non-Conductive.....A-9
100R7 Reduced OD Thermoplastic Twin Line.............A-10
100R7 Reduced OD Thermoplastic Twin Line NC.......A-10
SAE 100R18 Low Temperature Thermoplastic Hose...A-10
SAE 100R7...................................................................A-11
SAE 100R7 (Non-Conductive).....................................A-11
SAE 100R7 Twin Line..................................................A-12
SAE 100R7 Twin Line (Non Conductive)....................A-12
SAE 100R8...................................................................A-12
SAE 100R8 Non-Conductive.......................................A-13
SAE 100R12 (Caterpillar).............................................A-13
SAE 100R12 (Import)...................................................A-13
Dura-Hyd EX Super Abrasion Resistant 100R12.........A-14
SAE 100R13 Extra High Pressure (Import)..................A-14
Dura-Hyd EX Super Abrasion Resistant 100R13.........A-14
SAE 100R15 Extreme Pressure (Import)......................A-15
4SH Spiral Hose............................................................A-15
SAE 100R14 PTFE Hose..............................................A-16
Hydraulic Return Hose.................................................A-16
Refrigerant Hose (Air Conditioning)............................A-16
Push On Hose - Rubber Cover......................................A-17
Push On Hose - Blue Rubber Cover ... .........................A-17
Push On Hose - Cotton Cover.......................................A-17
Air Brake Hose..............................................................A-17
Pressure Wash Hose......................................................A-18
Section B - Vari-Crimp Hydraulic Couplings.
Vari-Crimp Couplings..........................................B-1 to B-9
Nuts and Sleeves for Tube Repair Coupling..................B-4
ORF O-Rings..................................................................B-6
Split Flange Kits and O-Rings........................................B-7
Routing Clamp Sleeves..................................................B-9
Vari-Crimp Crimp Diameter Charts................................B-9
GW Series BTW 100R12 Couplings.................B-10 to B14
GW Series BTW 100R12 Crimp Charts........................B-14
Vari-Crimp 4 Spiral Couplings......................................B-15
SX Series 100R13 Skive Type Couplings..........B-16 to B18
SX Series 100R13 Skive Crimp Charts.........................B-18
R5 Series - 100R5 Crimp Couplings................B-18 to B-19
T Series - R14 & R7 Crimp Couplings.............B-20 to B-22
Section C - Grip Crimp Hydraulic Couplings.
Grip Crimp Couplings.........................................C-1 to C-9
Nuts and Sleeves for Tube Repair Coupling..................C-5
Split Flange Kits and O-Rings.......................................C-7
Grip-Crimp Crimp Diameter Charts..............................C-9
Grip Crimp Pressure Wash Couplings..........................C-10
Section C - Grip Crimp Hydraulic Couplings.
6GC 4SH, R13, R15 BTW Couplings.............C-16 to C-18
6GC 4SH, R13, R15 BTW Crimp Charts.....................C-18
XP Series BTW 4SH Couplings.......................C-19 to C21
XP Series BTW 4SH Crimp Charts..............................C-21
Section D - Thermoplastic Hydraulic Couplings.
Couplings for 100R7 and 100R8..........................D-1 to D-2
Section G - Refrigerant Hose Fittings.
Refrigerant Hose Fittings....................................E-1 to E-2
Section H - Reusable Hydraulic Couplings, Push On
Fittings, Hose Assemblies, 100R4 Fittings, &
Accessories.
Two Bolt Coupling.........................................................F-1
Two Bolt Menders..........................................................F-1
Clamp Halves Only - Two Bolt.....................................F-1
Stems and Menders Only - Two Bolt............................F-1
Thin Cover - Non Mandrel............................................F-1
100R5 - Non Mandrel.....................................................F-1
Brass Push On Fittings...................................................F-2
Push On Fitting and Hose Kit.........................................F-2
Grease Hose Assemblies.................................................F-2
Stems and Ferrules 100R4 (Hyd. Suction).....................F-3
Spring Guards.................................................................F-3
Jack Hose Spring Guards and Labels...............................F-3
Bin Labels......................................................................F-3
Storage Bin......................................................................F-3
Section J - Hydraulic Adapters.
Adapters...............................................................G-1 to G-3
Adapter Kit.....................................................................G-3
Section K - Hose Fabrication Machinery.
Hydraulic Crimpers ......................................................H-1
Power Units & Hydraulic Swage Machinery.................H-2
Swage Dies and Pushers...............................................H-2
Hose Cutting Machinery and Accessories.....................H-2
Refrigerant Crimper, Dies, & Die Carriers....................H-2
Skive Tools......................................................................H-2
Section L - Cross References.
Hose Cross Reference.............................................J-1 to J-4
Vari-Crimp to Weatherhead...........................................J-5
Vari-Crimp to Parker-Dayco Old...................................J-6
Vari-Crimp to Parker Dayco New..................................J-7
GW Series 100R12 to Weatherhead...............................J-8
SX Series to Weatherhead................................................J-8
GW Series 100R12 to Parker Dayco................................J-9
R5 Series to Weatherhead..............................................J-10
T Series to Weatherhead.................................................J-10
Grip-Crimp to Parker......................................................J-11
Grip-Crimp to Gates.......................................................J-12
4GC Series to Parker......................................................J-13
6GC Series to Parker......................................................J-13
XP Series to Parker........................................................J-13
Thermoplastic Swage to Synflex, Parker, and Gates.....J-14
Section M - Thread Guide and Techincal Information.
Thread Identification Guide................................K-1 to K-2
Torque Value Charts.......................................................K-2
Metric Conversions.........................................................K-2
Hose Standards and Specifications.................................K-3
Hose Working Pressures and Temperatures....................K-4
Coupling Codes and Configurations...............................K-5
Hose Assembly Guide.....................................................K-6
WARRANTY.
Couplamatic Systems Inc., warrants that products sold by it will be free from defect in material and workmanship. In the event that claims are made with regard to defective materials or
workmanship, Couplamatic Systems Inc. shall have the option to repair, replace, or grant a credit for product determined in it’s sole descretion to be defective at time of sale. The foregoing
states Couplamatic Systems Inc. sole responsibility for breach of this warranty. In no event shall Couplamatic Systems Inc. be liable for consequential damages.
All warranty claims shall be presented within thirty (30) days after the defect is discovered and in addition will be honored only if presented within one year of date of purchase.
No other warranty, whether expressed or implied by operation of law or otherwise (including any warranty of merchantability, fitness, or performance), shall exist in connection with the sale
or use of any product sold by Couplamatic Systems Inc.
A
Bulk Hose
Min. Bend
Radius (In.)
4
5
7
9.5
12
Weight Per
Hundred Feet
16 lbs.
23 lbs.
29 lbs.
41 lbs.
62 lbs.
Reel
Footage
250’
250’
250’
250’
250’
IMPORT THIN COVER
1-WIRE HYDRAULIC HOSE
SAE 100R1AT /1SN No. 56MB-1
Weight Per
Hundred Feet
16 lbs.
23 lbs.
29 lbs.
41 lbs.
62 lbs.
84 lbs.
104 lbs.
140 lbs.
Reel
Footage
500’
500’
350’
250’
200’
Bulk
Bulk
Bulk
Min. Bend
Radius (In.)
5
7
A-1
Weight Per
Hundred Feet
23 lbs.
29 lbs.
Reel
Footage
250’
250’
K
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Burst
Pressure
(Lbs.)
9,000
8,000
Thread Identification
Working
Pressure
(Lbs.)
2,250
2,000
J
Hose
O.D.
0.690
0.812
Cross Reference
Hose
I.D.
3/8”
1/2”
H
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant cover, MSHA approved.
Reinforcement: One Wire Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip-Crimp pg C1-C9
Reusable pg F1
Fabrication Equipment
DOMESTIC THIN COVER 1-WIRE COAST
GUARD APPROVED HYDRAULIC HOSE
SAE 100R1AT No. GRISN-CG
G
Min. Bend
Radius (In.)
4
5
7
9.5
12
16.5
20
25
Adapters
Min. Burst
Pressure
(Lbs.)
13,000
10,400
9,300
6,100
5,100
3,600
2,900
2,320
F
Working
Pressure
(Lbs.)
3,250
2,600
2,325
1,525
1,275
900
725
580
Reusables, Pushon, Acces.
Hose
O.D.
0.530
0.687
0.812
1.090
1.405
1.710
1.970
2.505
E
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
Refrigerant
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant cover MSHA approved.
Reinforcement: One Wire Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip-Crimp pg C1-C9
D
Min. Burst
Pressure
(Lbs.)
11,000
9,000
8,000
5,000
4,000
Thermoplastic
Working
Pressure
(Lbs.)
2,750
2,250
2,000
1,250
1,000
C
Hose
O.D.
0.530
0.690
0.812
1.100
1.410
Grip Crimp
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
1”
B
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant cover, MSHA approved.
Reinforcement: One Wire Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip-Crimp pg C1-C9
Reusable pg F1
Vari-Crimp
DOMESTIC THIN COVER
1-WIRE HYDRAULIC HOSE
SAE 100R1AT No. 57MB-1
Bulk Hose Cross Reference pages J1-J4.
DOMESTIC THIN COVER
2-WIRE HYDRAULIC HOSE
SAE 100R2AT No. 57MB-2
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA Approved
Reinforcement: Two Wire Braids
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip-Crimp pg C1-C9
GW Series (3/4”-1”) pg B10-B14, Reusable pg F1
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Hose
O.D.
0.593
0.750
0.875
1.010
1.158
1.500
Working
Pressure
(Lbs.)
5,000
4,000
3,500
2,750
2,250
2,000
Min. Burst
Pressure
(Lbs.)
20,000
16,000
14,000
11,000
9,000
8,000
Min. Bend
Radius (In.)
4
5
7
8
9.5
12
Weight Per
Hundred Feet
24 lbs.
34 lbs.
43 lbs.
51 lbs.
61 lbs.
88 lbs.
Reel
Footage
250’
250’
250’
250’
250’
250’
IMPORT THIN COVER
2-WIRE HYDRAULIC HOSE
SAE 100R2AT No. 56MB-2
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA approved
Reinforcement: Two Wire Braids
Temperature:-40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip-Crimp pg C1-C9
GW Series (3/4”-1-1/4”) pg B10-B14, Reusable pg F1
Hose
I.D.
3/4”
1”
1-1/4”
Hose
O.D.
1.158
1.500
1.862
Working
Pressure
(Lbs.)
2,250
2,000
1,625
Min. Burst
Pressure
(Lbs.)
9,000
8,000
6,500
Min. Bend
Radius (In.)
9.5
12
16.5
Weight Per
Hundred Feet
61 lbs.
88 lbs.
129 lbs.
Reel
Footage
250’
200’
Bulk
See 2SN (Page A-3) for sizes 1/4” thru 5/8” and 1-1/2” thru 2”.
IMPORT THIN COVER
2-WIRE HYDRAULIC HOSE
SAE 100R2AT/2SN No. 2SN
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA approved
Reinforcement: Two Wire Braids
Temperature:-40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp (1/4”-5/8”) pg B1-B9,
Grip-Crimp (1/4”-2”) pg C1-C9,
GW Series (3/4”-2”) pg B10-B14
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
1-1/2”
2”
Hose
O.D.
0.593
0.750
0.875
1.010
1.158
1.500
1.862
2.115
2.625
Working
Pressure
(Lbs.)
5,800
4,800
4,000
3,625
3,125
2,400
1,800
1,300
1,150
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Burst
Pressure
(Lbs.)
23,200
19,200
16,000
14,500
12,500
9,600
7,200
5,200
4,600
Min. Bend
Radius (In.)
4
5
7
8
9.5
12
16.5
20
25
A-2
Weight Per
Hundred Feet
24 lbs.
34 lbs.
43 lbs.
51 lbs.
61 lbs.
88 lbs.
129 lbs.
161 lbs.
198 lbs.
Reel
Footage
500’
400’
300’
250’
250’
200’
Bulk
Bulk
Bulk
Bulk Hose Cross Reference pages J1-J4.
A
Bulk Hose
Min. Bend
Radius (In.)
2.0
3.0
3.6
4.0
5.0
Weight Per
Hundred Feet
24 lbs.
34 lbs.
43 lbs.
51 lbs.
61 lbs.
Reel
Footage
500’
400’
300’
250’
250’
Min. Burst
Pressure
(Lbs.)
23,200
20,000
17,000
14,500
12,500
10,000
Min. Bend
Radius (In.)
2
2.5
3.5
4
4.8
6
Weight Per
Hundred Feet
18 lbs.
27 lbs.
35 lbs.
40 lbs.
54 lbs.
74 lbs.
Reel
Footage
500’
400’
300’
250’
250’
200’
G
Working
Pressure
(Lbs.)
5,800
5,000
4,250
3,625
3,125
2,500
Adapters
Hose
O.D.
0.530
0.687
0.812
0.937
1.090
1.405
F
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Reusables, Pushon, Acces.
**Crimps to 100R1AT One Wire Thin Cover Specifications - Tighter Bend Radius than R1 and R2**
E
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA approved
Reinforcement: Two Wire Braids
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip-Crimp pg C1-C9
Refrigerant
IMPORT TWO WIRE HI-PRESSURE
EXTREMELY FLEXIBLE HYDRAULIC HOSE
SAE 100R16 / DIN 2SC
No. R16
D
Min. Burst
Pressure
(Lbs.)
26,120
22,340
20,000
18,500
17,400
Thermoplastic
Working
Pressure
(Lbs.)
6,530
5,585
5,000
4,625
4,350
C
Hose
O.D.
0.520
0.687
0.810
0.980
1.155
Grip Crimp
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
B
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA approved
Reinforcement: Two Wire Braids
Temperature:-40F to +212F (-40C to +100C)
Coupling Series: Grip-Crimp pg C1-C9
Vari-Crimp
IMPORT THIN COVER 2-WIRE
EXTREME PRESSURE HYDRAULIC HOSE
EXCEEDS 2SN/2SC Two Wire Braid No. 2SK
H
Fabrication Equipment
J
Cross Reference
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
A-3
Bulk Hose Cross Reference pages J1-J4.
IMPORT ULTRA TWO WIRE HI-PRESSURE
HIGH/LOW TEMP HYDRAULIC HOSE
ULTRA 100R16 / DIN 2SC
No. ULTRA R16
Applications: High Pressure Hydraulics, High/Low Temp Applications
Cover: Blue Flame Resistant Cover, MSHA approved
Reinforcement: Two Wire Braids
Temperature: -58F to +275F (-50C to +135C) (+302F/150C Discontinuous)
Coupling Series: Grip-Crimp pg C1-C9
**Crimps to 100R1AT One Wire Thin Cover Specs - Tighter Bend Radius than R1 and R2 - High/Low Temp**
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Hose
O.D.
0.530
0.687
0.812
0.937
1.090
1.405
Working
Pressure
(Lbs.)
5,800
5,000
4,250
3,625
3,125
2,500
Min. Burst
Pressure
(Lbs.)
23,200
20,000
17,000
14,500
12,500
10,000
Min. Bend
Radius (In.)
2
2.5
3.5
4
4.8
6
Weight Per
Hundred Feet
18 lbs.
27 lbs.
35 lbs.
40 lbs.
54 lbs.
74 lbs.
Reel
Footage
500’
400’
300’
250’
250’
200’
IMPORT 3000 PSI ONE WIRE DIMENSION
CONSTANT WORKING PRESSURE HYDRAULIC HOSE
SAE 100R17
No. R17R
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA approved
Reinforcement: One (1/4”-3/8”) or Two (1/2”) Wire Braids
Temperature:-40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip-Crimp pg C1-C9
Hose
I.D.
1/4”
3/8”
1/2”
Hose
O.D.
0.530
0.687
0.812
Working
Pressure
(Lbs.)
3,000
3,000
3,000
Min. Burst
Pressure
(Lbs.)
12,000
12,000
12,000
Min. Bend
Radius (In.)
2
3
3.5
Weight Per
Hundred Feet
16 lbs.
23 lbs.
31 lbs.
Reel
Footage
500’
500’
350’
IMPORT 3000 PSI REDUCED OD CONSTANT
WORKING PRESSURE HYDRAULIC HOSE
SAE 100R17 No. R17
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA approved
Reinforcement: One (1/4”-1/2”) or Two (5/8”-1”) Wire Braids
Temperature:-40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip-Crimp pg C1-C9
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Hose
O.D.
0.492
0.649
0.776
0.937
1.090
1.405
Working
Pressure
(Lbs.)
3,000
3,000
3,000
3,000
3,000
3,000
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Burst
Pressure
(Lbs.)
12,000
12,000
12,000
12,000
12,000
12,000
Min. Bend
Radius (In.)
2
3
4
4
5
6
A-4
Weight Per
Hundred Feet
13 lbs.
19 lbs.
31 lbs.
41 lbs.
53 lbs.
82 lbs.
Reel
Footage
500’
500’
350’
250’
250’
200’
Bulk Hose Cross Reference pages J1-J4.
A
Bulk Hose
Min. Burst
Pressure
(Lbs.)
12,000
12,000
12,000
12,000
12,000
Min. Bend
Radius (In.)
2
2.5
3.5
5
6
Weight Per
Hundred Feet
16 lbs.
23 lbs.
29 lbs.
55 lbs.
82 lbs.
Reel
Footage
250’
250’
250’
250’
250’
Min. Bend
Radius (In.)
2
2.5
3.5
4
4.8
6
Weight Per
Hundred Feet
18 lbs.
24 lbs.
31 lbs.
36 lbs.
49 lbs.
67 lbs.
Reel
Footage
250’
250’
250’
250’
250’
250’
H
Fabrication Equipment
Min. Burst
Pressure
(Lbs.)
20,000
16,000
14,000
11,000
9,000
8,000
G
Working
Pressure
(Lbs.)
5,000
4,000
3,500
2,750
2,250
2,000
Adapters
Hose
O.D.
0.541
0.693
0.823
0.950
1.103
1.415
F
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Reusables, Pushon, Acces.
**Crimps to 100R1AT One Wire Thin Cover Specifications - Half of the Bend Radius of R1 and R2**
E
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA Approved
Reinforcement: Two Wire Braids
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip-Crimp pg C1-C9
Refrigerant
HY-PLUS III TWO WIRE DOMESTIC HI-PRESSURE
HYDRAULIC HOSE EXTREMELY FLEXIBLE
SAE 100R16 No. HPIII
D
Working
Pressure
(Lbs.)
3,000
3,000
3,000
3,000
3,000
Thermoplastic
Hose
O.D.
0.535
0.690
0.813
1.100
1.410
C
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
1”
Grip Crimp
*3000 PSI working pressure can eliminate stocking two hoses. Higher Pressure and More Flexible than 100R1*
B
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA Approved
Reinforcement: One or Two Wire Braids
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip-Crimp pg C1-C9
Vari-Crimp
HY-PLUS I ONE WIRE DIMENSION HI-PRESSURE
HYDRAULIC HOSE - EXTREMELY FLEXIBLE
DOMESTIC SAE 100R17 No. HPI
J
Cross Reference
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
A-5
Bulk Hose Cross Reference pages J1-J4.
DURA-HYD ABRASION RESISTANT 100R17
HI-PRESSURE HYDRAULIC HOSE
SAE 100R17
No. DH17
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant, Abrasion Resistant, Yellow layline, MSHA
Reinforcement: One or Two Wire Braids
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Grip-Crimp (1/4”-1”) pg C1-C9,
Vari-Crimp (1/4” to 3/4”) pgB1-B9, GW (1”) pg B10-B14
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Hose
O.D.
0.535
0.690
0.810
0.950
1.100
1.410
Working
Pressure
(Lbs.)
3,000
3,000
3,000
3,000
3,000
3,000
Min. Burst
Pressure
(Lbs.)
12,000
12,000
12,000
12,000
12,000
12,000
Min. Bend
Radius (In.)
2
2.5
3.5
5
5
6
Weight Per
Hundred Feet
16 lbs.
23 lbs.
29 lbs.
38 lbs.
55 lbs.
82 lbs.
Reel
Footage
250’
250’
250’
200’
250’
250’
DURA-HYD ABRASION RESISTANT 100R16/2SC
EXTRA HI-PRESSURE HYDRAULIC HOSE
SAE 100R16/2SC
No. DH16
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant, Abrasion Resistant, MSHA approved.
Reinforcement: Two Wire Braids
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Grip-Crimp pg C1-C9, Vari-Crimp pg B1-B9
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Hose
O.D.
0.530
0.687
0.812
0.937
1.090
1.405
Working
Pressure
(Lbs.)
5,800
5,000
4,250
3,625
3,125
2,500
Min. Burst
Pressure
(Lbs.)
23,200
20,000
17,000
14,500
12,500
10,000
Min. Bend
Radius (In.)
2
2.5
3.5
4
4.8
6
Weight Per
Hundred Feet
18 lbs.
27 lbs.
35 lbs.
40 lbs.
54 lbs.
74 lbs.
Reel
Footage
500’
400’
300’
250’
250’
200’
DURA-HYD EX SUPER ABRASION RESISTANT
R16/2SC EXTRA HI-PRESSURE HYDRAULIC HOSE
SAE 100R16/2SC
No. DHEX16
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Bi-Layer, SUPER Abrasion Resistant, MSHA
Reinforcement: Two Wire Braids
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Grip-Crimp pg C1-C9, Vari-Crimp pg B1-B9
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Hose
O.D.
0.530
0.687
0.812
0.937
1.090
1.405
Working
Pressure
(Lbs.)
5,800
5,000
4,250
3,625
3,125
2,500
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Burst
Pressure
(Lbs.)
23,200
20,000
17,000
14,500
12,500
10,000
Min. Bend
Radius (In.)
2
2.5
3.5
4
4.8
6
A-6
Weight Per
Hundred Feet
18 lbs.
27 lbs.
35 lbs.
40 lbs.
54 lbs.
74 lbs.
Reel
Footage
500’
400’
300’
250’
250’
200’
Bulk Hose Cross Reference pages J1-J4.
A
Bulk Hose
B
Vari-Crimp
Working
Pressure
(Lbs.)
10,000
10,000
Min. Burst
Pressure
(Lbs.)
20,000
20,000
Min. Bend
Radius (In.)
3.2
3.8
Weight Per
Hundred Feet
24 lbs.
34 lbs.
Reel
Footage
500’
400’
Min. Bend
Radius (In.)
3
4
5
6
8
Weight Per
Hundred Feet
12 lbs.
17 lbs.
25 lbs.
43 lbs.
51 lbs.
Reel
Footage
500’
500’
500’
500’
500’
Coupling Series: Vari-Crimp (3/4”-1-1/4”) pg B1-B9, GW Series (1-1/2”-2”)
pg B10-B14, Grip-Crimp (3/4”-2”) pg C1-C9,
Crimp/Band pg F3
Vacuum
Rating
(Inches of Hg)
25
25
25
25
25
Weight Per
Hundred Feet
49 lbs.
64 lbs.
86 lbs.
122 lbs.
139 lbs.
Bale
Footage
200’
200’
100’
100’
100’
Cut lengths available in multiples of 25’
Couplamatic Systems Inc. Hydraulic Catalog 4010.
A-7
Bulk Hose Cross Reference pages J1-J4.
K
Min. Burst
Pressure Min. Bend
(Lbs.)
Radius (In.)
1,200
5
1,000
6
800
8
600
10
400
12
Thread Identification
Working
Pressure
(Lbs.)
300
250
200
150
100
J
Hose
O.D.
1.160
1.480
1.770
2.050
2.500
Cross Reference
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
H
Applications: Hydraulic Suction or Return, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA approved
Reinforcement: One Fiber Braid, one helical wire
Temperature: -40F to +212F (-40C to +100C)
Fabrication Equipment
HYDRAULIC SUCTION HOSE
SAE 100R4
No. 104MB
G
Min. Burst
Pressure
(Lbs.)
5,000
4,500
4,000
3,000
2,260
Adapters
Working
Pressure
(Lbs.)
1,250
1,125
1,000
750
565
F
Hose
O.D.
0.560
0.750
0.940
1.250
1.500
Reusables, Pushon, Acces.
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
1”
E
Applications: Low Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Cover, MSHA Approved
Reinforcement: Two Rayon Braids
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: Vari-Crimp pg B1-B9, Grip Crimp pg C1-C9
*Cut lengths available*
Refrigerant
MEDIUM PRESSURE HYDRAULIC HOSE
SAE 100R3
No. 3319A
D
Hose
O.D.
0.582
0.750
Thermoplastic
Hose
I.D.
1/4”
3/8”
C
Applications: High Pressure Hydraulic Jacking Applications
Cover: Flame Resistant Cover
Reinforcement: Two Wire Braids - 2:1 Design Factor
Temperature:-40F to +212F (-40C to +100C)
Coupling Series: GC01 4x4, GC01 4x6, GC01 6x4,
GC01 6x6 Only. Pg C1
Spring Guards and Warning Labels pg F3
Grip Crimp
HYDRAULIC JACK HOSE
2-WIRE HYDRAULIC HOSE
Two Wire Braid No. JH2
TEXTILE COVERED HYDRAULIC HOSE
SAE 100R5 No. 58MBA
SAE J1402, DOT FMVSS 106 AII (3/16” thru 5/8”)
Applications: Medium Pressure Applications Hydraulics, Air, Water.
Cover: Black Textile Braid
Reinforcement: One Wire Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: R5 Series pg B19, Reusables pg F1
Hose
I.D.
3/16”(-4)
1/4”(-5)
5/16”(-6)
13/32”(-8)
1/2”(-10)
5/8”(-12)
7/8”(-16)
1-1/8”(-20)
1-3/8”(-24)
1-13/16”(-32)
Hose
O.D.
0.520
0.580
0.680
0.770
0.921
1.080
1.240
1.500
1.750
2.220
Working
Pressure
(Lbs.)
3,000
3,000
2,250
2,000
1,750
1,500
800
625
500
350
Min. Burst
Pressure
(Lbs.)
12,000
12,000
9,000
8,000
7,000
6,000
3,200
2,500
2,000
1,400
Min. Bend
Radius (In.)
3
3.4
4
4.6
5.5
6.5
7.4
9
10.5
13.25
Weight Per
Hundred Feet
15 lbs.
17 lbs.
22 lbs.
30 lbs.
37 lbs.
46 lbs.
48 lbs.
58 lbs.
62 lbs.
86 lbs.
Reel
Footage
250’
250’
250’
250’
250’
250’
250’
100’
Bulk
Bulk
TEXTILE COVERED HIGH
TEMPERATURE HYDRAULIC HOSE
SAE 100R5
No. HTR5
SAE J1402, DOT FMVSS 106 AII (3/16” thru 5/8”)
Applications: Medium Pressure High Temp Hydraulics, Air, Water.
Cover: Blue Textile Braid, High Temperature
Reinforcement: One Wire Braid
Temperature: -40F to +300F (-40C to +150C)
Coupling Series: R5 Series pg B19, Reusables pg F1
Hose
I.D.
3/16”(-4)
1/4”(-5)
5/16”(-6)
13/32”(-8)
1/2”(-10)
5/8”(-12)
7/8”(-16)
1-1/8”(-20)
1-3/8” (-24)
1-13/16” (-32)
Hose
O.D.
0.520
0.580
0.680
0.770
0.921
1.080
1.240
1.500
1.750
2.220
Working
Pressure
(Lbs.)
3,000
3,000
2,250
2,000
1,750
1,500
800
625
500
350
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Burst
Pressure
(Lbs.)
12,000
12,000
9,000
8,000
7,000
6,000
3,200
2,500
2,000
1,400
Min. Bend
Radius (In.)
3
3.4
4
4.6
5.5
6.5
7.4
9
10.5
13.2
A-8
Weight Per
Hundred Feet
15 lbs.
17 lbs.
22 lbs.
30 lbs.
37 lbs.
46 lbs.
48 lbs.
52 lbs.
81 lbs.
99 lbs.
Reel
Footage
250’
250’
250’
250’
250’
250’
250’
100’
Bulk
Bulk
Bulk Hose Cross Reference pages J1-J4.
A
Bulk Hose
Min. Bend
Radius (In.)
2.5
3
4
Weight Per
Hundred Feet
8 lbs.
12 lbs.
17 lbs.
Reel
Footage
500’
500’
500’
THERMOPLASTIC HYDRAULIC HOSE
SAE 100R7 (Reduced OD) No. RD7
Min. Burst
Pressure
(Lbs.)
11,000
10,000
9,000
Min. Bend
Radius (In.)
1.5
1.75
2.0
Weight Per
Hundred Feet
5 lbs.
8 lbs.
10 lbs.
Coil
Footage
250’
250’
250’
NON-CONDUCTIVE THERMOPLASTIC
HYDRAULIC HOSE
SAE 100R7 (Reduced OD) No. RD7NC
Min. Bend
Radius (In.)
1.5
1.75
2.0
Weight Per
Hundred Feet
5 lbs.
8 lbs.
10 lbs.
Coil
Footage
250’
250’
250’
J
RD7NC Meets ANSI spec 92.2.
Cross Reference
Min. Burst
Pressure
(Lbs.)
11,000
10,000
9,000
H
Working
Pressure
(Lbs.)
2,750
2,500
2,250
Fabrication Equipment
Hose
O.D.
0.455
0.562
0.618
G
Hose
I.D.
1/4”
5/16”
3/8”
Adapters
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Orange Non-Conductive Polyurethane, ANSI 92.2, Non-Perforated
Tube: Polyester Elastomer
Reinforcement: Polyester Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: T Series pg B20-B22
F
Working
Pressure
(Lbs.)
2,750
2,500
2,250
Reusables, Pushon, Acces.
Hose
O.D.
0.455
0.562
0.618
E
Hose
I.D.
1/4”
5/16”
3/8”
Refrigerant
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Black Polyurethane, Perforated
Tube: Polyester Elastomer
Reinforcement: Polyester Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: T Series pg B20-B22
D
Min. Burst
Pressure
(Lbs.)
1,600
1,600
1,600
Thermoplastic
Working
Pressure
(Lbs.)
400
400
400
C
Hose
O.D.
0.500
0.630
0.780
Grip Crimp
Hose
I.D.
1/4”
3/8”
1/2”
B
Applications: Low Pressure Hydraulics, Industrial or Agricultural
Cover: Neoprene
Reinforcement: One Textile Braid
Temperature: -40F to +212F (-40C to +100C)
*Cut lengths available*
Vari-Crimp
LOW PRESSURE HYDRAULIC HOSE
SAE 100R6 No. H6H
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
A-9
Bulk Hose Cross Reference pages J1-J4.
TWIN LINE THERMOPLASTIC HYDRAULIC
HOSE SAE 100R7 (Reduced OD) No. RD7TL
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Black Polyurethane, Perforated
Tube: Polyester Elastomer
Reinforcement: Polyester Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: T Series pg B20-B22
Hose
I.D.
1/4”
5/16”
3/8”
Hose
O.D.
0.455
0.562
0.618
Working
Pressure
(Lbs.)
2,750
2,500
2,250
Min. Burst
Pressure
(Lbs.)
11,000
10,000
9,000
Min. Bend
Radius (In.)
1.5
1.75
2
Weight Per
Hundred Feet
10 lbs.
16 lbs.
21 lbs.
Coil
Footage
250’
250’
250’
NON-CONDUCTIVE TWIN LINE
THERMOPLASTIC HYDRAULIC HOSE
SAE 100R7 (Reduced OD) No. RD7TLNC
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Orange Non-Conductive Polyurethane, ANSI 92.2, Non-Perforated
Tube: Polyester Elastomer
Reinforcement: Polyester Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: T Series pg B20-B22
Hose
I.D.
1/4”
5/16”
3/8”
Hose
O.D.
0.455
0.562
0.618
Working
Pressure
(Lbs.)
2,750
2,500
2,250
Min. Burst
Pressure
(Lbs.)
11,000
10,000
9,000
Min. Bend
Radius (In.)
1.5
1.75
2
Weight Per
Hundred Feet
10 lbs.
16 lbs.
21 lbs.
Coil
Footage
250’
250’
250’
RD7TLNC Meets ANSI spec 92.2.
THERMOPLASTIC HYDRAULIC HOSE
3000 PSI LOW TEMP SAE 100R18 No. R18
Applications: Medium Pressure Hydraulics, Industrial or Agricultural,
Cold Storage and Refrigerated Areas
Cover: Black Polyester Elastomer (Non-Stick), Perforated
Tube: Polyester Elastomer
Reinforcement: Polyester Braid
Temperature: -70F to +212F (-57C to +100C)
Coupling Series: 3 Series Thermoplastic pg D1-D2
Hose
I.D.
1/4”
3/8”
Hose
O.D.
0.470
0.650
Working
Pressure
(Lbs.)
3,000
3,000
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Burst
Pressure
(Lbs.)
12,000
12,000
Min. Bend
Radius (In.)
1.25
2.00
A-10
Weight Per
Hundred Feet
6 lbs.
10 lbs.
Coil
Footage
250’
250’
Bulk Hose Cross Reference pages J1-J4.
A
Bulk Hose
Coil
Footage
250’
250’
250’
250’
250’
250’
100’
100’
Min. Bend
Radius (In.)
1.5
1.75
2
3
6.5
8
Weight Per
Hundred Feet
6 lbs.
7.5 lbs.
10 lbs.
15.6 lbs.
19 lbs.
27 lbs.
Coil
Footage
250’
250’
250’
250’
100’
100’
H
Min. Burst
Pressure
(Lbs.)
11,000
10,000
9,000
8,000
5,000
4,000
Fabrication Equipment
Working
Pressure
(Lbs.)
2,750
2,500
2,250
2,000
1,250
1,000
G
Hose
O.D.
0.508
0.585
0.650
0.815
1.062
1.335
Adapters
Hose
I.D.
1/4”
5/16”
3/8”
1/2”
3/4”
1”
F
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Orange Non-Conductive Polyurethane, Non-Perforated
Tube: Polyester Elastomer
Reinforcement: Polyester Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: 3 Series Thermoplastic (1/4”-1”) pg D1-D2
T Series (1/2”-1”) pg B20-B22
Reusables, Pushon, Acces.
NON-CONDUCTIVE THERMOPLASTIC
HYDRAULIC HOSE SAE 100R7 No. H7NC
E
Weight Per
Hundred Feet
3 lbs.
4.9 lbs.
6 lbs.
7.5 lbs.
10 lbs.
15.6 lbs.
19 lbs.
27 lbs.
Refrigerant
Min. Bend
Radius (In.)
0.5
0.75
1.5
1.75
2
3
6.5
8
D
Min. Burst
Pressure
(Lbs.)
12,000
12,000
11,000
10,000
9,000
8,000
5,000
4,000
Thermoplastic
Working
Pressure
(Lbs.)
3,000
3,000
2,750
2,500
2,250
2,000
1,250
1,000
C
Hose
O.D.
0.325
0.433
0.508
0.585
0.650
0.815
1.062
1.335
Grip Crimp
Hose
I.D.
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
3/4”
1”
B
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Black Polyurethane, Perforated
Tube: Polyester Elastomer
Reinforcement: Polyester Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: 3 Series Thermoplastic (1/8”-1”) pg D1-D2
T Series (1/2”-1”) pg B20-B22
Vari-Crimp
THERMOPLASTIC HYDRAULIC HOSE
SAE 100R7 No. H7
J
Cross Reference
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
A-11
Bulk Hose Cross Reference pages J1-J4.
TWIN LINE THERMOPLASTIC HYDRAULIC
HOSE SAE 100R7 No. H7TL
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Black Polyurethane, Perforated
Tube: Polyester Elastomer
Reinforcement: Polyester Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: 3 Series Thermoplastic (1/4”-1/2”) pg D1-D2
T Series (1/2”) pg B20-B22
Hose
I.D.
1/4”
5/16”
3/8”
1/2”
Hose
O.D.
0.508
0.585
0.650
0.815
Working
Pressure
(Lbs.)
2,750
2,500
2,250
2,000
Min. Burst
Pressure
(Lbs.)
11,000
10,000
9,000
8,000
Min. Bend
Radius (In.)
1.5
1.75
2
3
Weight Per
Hundred Feet
12 lbs.
16.6 lbs.
21 Lbs.
34 lbs.
Coil
Footage
250’
250’
250’
250’
NON-CONDUCTIVE TWIN LINE
THERMOPLASTIC HYDRAULIC HOSE
SAE 100R7 No. H7TLNC
Applications: Medium Pressure Hydraulics, Industrial or Agricultural
Cover: Orange Non-Conductive Polyurethane, Non-Perforated
Tube: Polyester Elastomer
Reinforcement: Polyester Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: 3 Series Thermoplastic (1/4”-1/2”) pg D1-D2
T Series (1/2”) pg B20-B22
Hose
I.D.
1/4”
5/16”
3/8”
1/2”
Hose
O.D.
0.508
0.585
0.650
0.815
Working
Pressure
(Lbs.)
2,750
2,500
2,250
2,000
Min. Burst
Pressure
(Lbs.)
11,000
10,000
9,000
8,000
Min. Bend
Radius (In.)
1.5
1.75
2
3
Weight Per
Hundred Feet
12 lbs.
16.6 lbs.
21 Lbs.
34 lbs.
Coil
Footage
250’
250’
250’
250’
THERMOPLASTIC HYDRAULIC HOSE
SAE 100R8 No. HS8
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Black Polyurethane, Perforated
Tube: Nylon
Reinforcement: Aramid Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: 3 Series Thermoplastic pg D1-D2
Hose
I.D.
3/16”
1/4”
3/8”
1/2”
Hose
O.D.
0.433
0.508
0.650
0.815
Working
Pressure
(Lbs.)
5,000
5,000
4,000
3,500
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Burst
Pressure
(Lbs.)
20,000
20,000
16,000
14,000
Min. Bend
Radius (In.)
1.5
2
2.5
4
A-12
Weight Per
Hundred Feet
5 lbs.
6 lbs.
8 lbs.
13 lbs.
Coil
Footage
250’
250’
250’
250’
Bulk Hose Cross Reference pages J1-J4.
A
Bulk Hose
Min. Bend
Radius (In.)
2
2.5
4
Weight Per
Hundred Feet
6 lbs.
8 lbs.
13 lbs.
Coil
Footage
250’
250’
250’
Min. Bend
Radius (In.)
3.5
4.75
6
8.25
10
12.5
Weight Per
Hundred Feet
50 lbs.
81 lbs.
119 lbs.
155 lbs.
181 lbs.
256 lbs.
Coil
Footage
50' Lengths
50' Lengths
50' Lengths
50' Lengths
50' Lengths
50' Lengths
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Bend
Radius (In.)
7
9.5
12
16.5
20
25
A-13
Weight Per
Hundred Feet
56 lbs.
95 lbs.
131 lbs.
194 lbs.
229 lbs.
317 lbs.
Available
Footage
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk Hose Cross Reference pages J1-J4.
K
Min. Burst
Pressure
(Lbs.)
16,000
16,000
16,000
12,000
10,000
10,000
Thread Identification
Working
Pressure
(Lbs.)
4,000
4,000
4,000
3,000
2,500
2,500
J
Hose
O.D.
0.937
1.208
1.496
1.850
2.106
2.626
Cross Reference
Hose
I.D.
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
H
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Black Cover, MSHA Approved, Grey Layline
Reinforcement: 4 High Tensile Steel Spirals
Temperature: -40F to +250F (-40 to +121C)
Coupling Series: Skive: Vari-Crimp R12 Skive pg B15,
No Skive: GW Series pg B10-B14 , 4GC Series pg C11-C15
Fabrication Equipment
FOUR SPIRAL HIGH PRESSURE
IMPORT HYDRAULIC HOSE
SAE 100R12 No. RC12B
G
Min. Burst
Pressure
(Lbs.)
16,000
16,000
16,000
12,000
10,000
10,000
Adapters
Working
Pressure
(Lbs.)
4,000
4,000
4,000
3,000
2,500
2,500
F
Hose
O.D.
0.935
1.210
1.495
1.850
2.105
2.626
Reusables, Pushon, Acces.
Hose
I.D.
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
E
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Black Cover, MSHA approved
Reinforcement: 4 Spirals
Temperature: -40F to +250F (-40C to +121C)
Coupling Series: Skive: Vari-Crimp R12 Skive pg B15 ,
No Skive: GW Series pg B10-B14 , 4GC Series pg C11-C15
Refrigerant
FOUR SPIRAL HIGH PRESSURE
HYDRAULIC HOSE
SAE 100R12 (Caterpillar) No. SP580
D
Min. Burst
Pressure
(Lbs.)
20,000
16,000
14,000
Thermoplastic
Working
Pressure
(Lbs.)
5,000
4,000
3,500
C
Hose
O.D.
0.508
0.650
0.815
Grip Crimp
Hose
I.D.
1/4”
3/8”
1/2”
B
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Orange Non-Conductive Polyurethane, Non-Perforated
Tube: Nylon
Reinforcement: Aramid Braid
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: 3 Series Thermoplastic pg D1-D2
Vari-Crimp
NON-CONDUCTIVE THERMOPLASTIC
HYDRAULIC HOSE
SAE 100R8 No. HS8NC
DURA-HYD EX SUPER ABRASION RESISTANT
FOUR SPIRAL HIGH PRESSURE IMPORT
HYDRAULIC HOSE SAE 100R12 No. DHEXR12
Applications: High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Bi-Layer, SUPER Abrasion Resistant, MSHA
Reinforcement: 4 High Tensile Steel Spirals
Temperature: -40F to +250F (-40 to +121C)
Coupling Series: Skive: Vari-Crimp R12 Skive pg B15,
No Skive: GW Series pg B10-B14 , 4GC Series pg C11-C15
Hose
I.D.
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
Hose
O.D.
0.937
1.208
1.496
1.850
2.106
2.626
Working
Pressure
(Lbs.)
4,000
4,000
4,000
3,000
2,500
2,500
Min. Burst
Pressure
(Lbs.)
16,000
16,000
16,000
12,000
10,000
10,000
Min. Bend
Radius (In.)
7
9.5
12
16.5
20
25
Weight Per
Hundred Feet
56 lbs.
95 lbs.
131 lbs.
194 lbs.
229 lbs.
317 lbs.
Available
Footage
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
MULTISPIRAL EXTRA HIGH PRESSURE
IMPORT HYDRAULIC HOSE
SAE 100R13 No. RC13
Applications: Very High Pressure Hydraulics, Industrial or Agricultural
Cover: Black Cover, MSHA Approved, Red Layline
Reinforcement: 4 or 6 High Tensile Steel Spirals
Temperature: -40F to +250F (-40C to +121C)
Couplings: SX Series Skive pg B16-B18, 6GC Series No Skive C16-C18
Hose
I.D.
3/4”
1”
1-1/4"
1-1/2”
2”
Hose
O.D.
1.260
1.515
1.940
2.255
2.820
Working
Pressure
(Lbs.)
5,000
5,000
5,000
5,000
5,000
Min. Burst
Pressure
(Lbs.)
20,000
20,000
20,000
20,000
20,000
Min. Bend
Radius (In.)
9.5
12
16.5
20
25
Weight Per
Hundred Feet
121 lbs.
153 lbs.
288 lbs.
361 lbs.
471 lbs.
Available
Footage
Bulk
Bulk
Bulk
Bulk
Bulk
DURA-HYD EX SUPER ABRASION RESISTANT
MULTISPIRAL EXTRA HIGH PRESSURE IMPORT
HYDRAULIC HOSE SAE 100R13 No. DHEXR13
Applications: Very High Pressure Hydraulics, Industrial or Agricultural
Cover: Flame Resistant Bi-Layer, SUPER Abrasion Resistant, MSHA
Reinforcement: 4 or 6 High Tensile Steel Spirals
Temperature: -40F to +250F (-40C to +121C)
Couplings: SX Series Skive pg B16-B18, 6GC Series No Skive C16-C18
Hose
I.D.
3/4”
1”
1-1/4"
1-1/2”
2”
Hose
O.D.
1.260
1.515
1.940
2.255
2.820
Working
Pressure
(Lbs.)
5,000
5,000
5,000
5,000
5,000
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Burst
Pressure
(Lbs.)
20,000
20,000
20,000
20,000
20,000
Min. Bend
Radius (In.)
9.5
12
16.5
20
25
A-14
Weight Per
Hundred Feet
121 lbs.
153 lbs.
288 lbs.
361 lbs.
471 lbs.
Available
Footage
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk Hose Cross Reference pages J1-J4.
A
Bulk Hose
Min. Bend
Radius (In.)
10.5
13
17.5
21
Weight Per
Hundred Feet
114 lbs.
153 lbs.
288 lbs.
360 lbs.
Available
Footage
Bulk
Bulk
Bulk
Bulk
FOUR SPIRAL EXTRA HIGH PRESSURE
IMPORT HYDRAULIC HOSE
4SH (EN856) No. 4SH
Weight Per
Hundred Feet
97 lbs.
112 lbs.
155 lbs.
181 lbs
241 lbs.
333 lbs.
Available
Footage
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
G
Min. Bend
Radius (In.)
9.5
11
13.5
18
22
27.5
Adapters
Min. Burst
Pressure
(Lbs.)
24,360
24,360
22,040
20,300
16,820
14,500
F
Working
Pressure
(Lbs.)
6,090
6,090
5,510
5,075
4,205
3,625
Reusables, Pushon, Acces.
Hose
O.D.
1.130
1.268
1.523
1.791
2.085
2.660
E
Hose
I.D.
5/8”
3/4”
1”
1-1/4”
1-1/2”
2”
Refrigerant
Applications: Very High Pressure Hydraulics, Industrial or Agricultural
Cover: Black Cover, MSHA Approved, White Layline
Reinforcement: 4 High Tensile Steel Spirals
Temperature: -40F to +212F (-40C to +100C)
Coupling Series: No Skive 6GC Series (5/8”, 3/4”, & 1”) pg C16-C18
No Skive XP Series (1-1/4”, 1-1/2”, & 2”) pg C19-C21
D
Min. Burst
Pressure
(Lbs.)
24,360
24,360
24,360
24,360
Thermoplastic
Working
Pressure
(Lbs.)
6,090
6,090
6,090
6,090
C
Hose
O.D.
1.260
1.515
1.940
2.255
Grip Crimp
Hose
I.D.
3/4”
1”
1-1/4"
1-1/2”
B
Applications: Very High Pressure Hydraulics, Industrial or Agricultural
Cover: Black Cover, MSHA Approved, Yellow Layline
Reinforcement: 4 or 6 High Tensile Steel Spirals
Temperature: -40F to +250F (-40C to +121C)
Coupling Series: No Skive 6GC Series pg C16-C18
Vari-Crimp
MULTISPIRAL EXTREME PRESSURE
IMPORT HYDRAULIC HOSE
SAE 100R15 No. RC15
H
Fabrication Equipment
J
Cross Reference
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
A-15
Bulk Hose Cross Reference pages J1-J4.
PTFE HYDRAULIC HOSE
SAE 100R14 No. TR14
Applications: Fuel, Lubricant, Steam, Hydraulic, & Compressed Gas
Cover: 304 Stainless Braid
Reinforcement: One (3/16”-3/4”) or Two (1”) Stainless Braids
Temperature:-65F to +400F (-54C to +204C), -100F to +500F (-73C to +260 C) Intermittent
Coupling Series: T Series pg B20-B22
Working
Min. Burst
Hose
Hose
Pressure
Pressure
Min. Bend
I.D.
O.D.
(Lbs.)
(Lbs.)
Radius (In.)
3/16”
.312
3000
12000
2.0
1/4”
.375
3000
12000
3.0
5/16”
.445
2500
10000
4.0
3/8”
.503
2250
9000
4.5
1/2”
.648
1500
6000
6.5
3/4”
.886
1100
4400
8.2
1”
1.135
900
3600
10.0
Working pressure and Burst Pressure rated at room temperature.
Weight Per
Hundred Feet
5 lbs
7 lbs
11 lbs
12 lbs
15 lbs
20 lbs
30 lbs
Reel
Footage
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
HYDRAULIC RETURN LINE HOSE
No. 3284H
Applications: Hydraulic Return Line
Cover: Rubber (Red)
Reinforcement: Two Fiber Braid
Temperature: -40F to +200F (-40 to +96C)
Coupling Series: Band Stems pg F3
Hose
I.D.
1/2”
3/4”
1”
1-1/4”
1-1/2”
Hose
O.D.
0.875
1.156
1.437
1.781
2.031
Working
Pressure
(Lbs.)
300
300
300
250
250
Min. Burst
Pressure
(Lbs.)
-----------
Min. Bend
Radius (In.)
7.5
11.5
14
18.5
22
Weight Per
Hundred Feet
24 lbs.
41 lbs.
62 lbs.
84 lbs.
104 lbs.
Reel
Footage
500’
500’
450’
400’
300’
Cut lengths available in multiples of 25’.
REFRIGERANT HOSE
R12 & R134A COMPATIBLE No. F204
Applications: Air Conditioning, Refrigerant
Cover: Rubber
Reinforcement: Two Fiber Braid, Internal Nylon Barrier
Temperature: -22F to +257F (-30C to +125C)
Coupling Series: Refrigerant Couplings pg E1-E2
Hose
I.D.
5/16” (#6)
13/32” (#8)
1/2” (#10)
5/8” (#12)
Hose
O.D.
0.750
0.910
1.000
1.130
Working
Pressure
(Lbs.)
500
500
500
350
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Burst
Pressure
(Lbs.)
2,000
2,000
2,000
1,750
Min. Bend
Radius (In.)
4
5
5
6
A-16
Weight Per
Hundred Feet
20 lbs.
28 lbs.
33 lbs.
38 lbs.
Reel
Footage
825’
725’
700’
525’
Bulk Hose Cross Reference pages J1-J4.
A
Bulk Hose
Min. Burst
Pressure
(Lbs.)
1,200
1,200
1,200
1,200
1,200
Min. Bend
Radius (In.)
2.5
3
5
6
7
Weight Per
Hundred Feet
9 lbs.
11 lbs.
13 lbs.
19 lbs.
21 lbs.
Reel
Footage
500’
500’
500’
500’
500’
Min. Burst
Pressure
(Lbs.)
1200
1,200
1,200
1,200
1,200
Min. Bend
Radius (In.)
2.5
3
5
6
7
Weight Per
Hundred Feet
9 lbs.
11 lbs.
13 lbs.
19 lbs.
21 lbs.
Reel
Footage
500’
500’
500’
500’
500’
TEXTILE COVERED PUSH-ON
HOSE No. 026H
Min. Burst
Pressure
(Lbs.)
1,200
1,200
1,200
1,200
1,200
Min. Bend
Radius (In.)
2.5
3
5
6
7
Weight Per
Hundred Feet
7 lbs.
10 lbs.
12 lbs.
19 lbs.
21 lbs.
Reel
Footage
500’
500’
500’
500’
500’
Working
Pressure
(Lbs.)
225
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Min. Burst
Pressure
(Lbs.)
900
Min. Bend
Radius (In.)
3.5
A-17
Weight Per
Hundred Feet
20 lbs.
Reel
Footage
500’
Bulk Hose Cross Reference pages J1-J4.
K
Hose
O.D.
0.750
Thread Identification
Hose
I.D.
3/8”
J
Applications: Air Brake
Cover: Rubber
Reinforcement: 4 Spiral Polyester
Temperature: -40 to +200F (-40 to +96C)
Cross Reference
AIR BRAKE HOSE SAE J1402 TABLE A
DOT FMVSS 106 No. J1402A
H
Working
Pressure
(Lbs.)
300
300
300
300
300
Fabrication Equipment
Hose
O.D.
0.500
0.640
0.750
0.910
1.031
G
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
Adapters
Applications: Low Pressure
Cover: Oil and Mildew Resistant Textile
Reinforcement: One Fiber Braid
Temperature: -40 to +200F (-40 to +96C)
Coupling Series: Brass Push-On Couplings pg F2
F
Working
Pressure
(Lbs.)
300
300
300
300
300
Reusables, Pushon, Acces.
Hose
O.D.
0.500
0.640
0.750
0.910
1.031
E
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
Refrigerant
Applications: Low Pressure
Cover: Blue Oil Resistant Rubber
Reinforcement: One Fiber Braid
Temperature: -40 to +190F (-40 to +88C)
Coupling Series: Brass Push-On Couplings pg F2
D
BLUE RUBBER COVERED PUSH-ON
HOSE No. 024H
Thermoplastic
Working
Pressure
(Lbs.)
300
300
300
300
300
C
Hose
O.D.
0.500
0.640
0.750
0.910
1.031
Grip Crimp
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
B
Applications: Low Pressure
Cover: Black Oil Resistant Rubber
Reinforcement: One Fiber Braid
Temperature: -40 to +190F (-40 to +88C)
Coupling Series: Brass Push-On Couplings pg F2
Vari-Crimp
RUBBER COVERED PUSH-ON
HOSE No. 025H
IMPORT THIN COVER 1-WIRE PRESSURE
WASH HOSE One Wire Braid
Applications: Medium Pressure, Pressure Wash
Cover: Blue Smooth, Non-Marking, Weather Resistant (PW4000BLU)
Grey Smooth, Non-Marking, Weather Resistant (PW4000GRY)
Black Smooth, Weather Resistant (PW4000)
Reinforcement: One Wire Braid
Temperature: -40F to +300F (-40C to +150C)
Coupling Series: Grip Crimp Pressure Wash Bite to the Wire pg C10
Hose
I.D.
1/4”
3/8”
Hose
O.D.
0.480
0.610
Working
Pressure
(Lbs.)
4,000
4,000
Min. Burst
Pressure
(Lbs.)
14,500
14,500
Min. Bend
Radius (In.)
3
4
Weight Per
Hundred Feet
12 lbs.
18 lbs.
Reel
Footage
600’
600’
IMPORT THIN COVER
2-WIRE PRESSURE WASH HOSE
Two Wire Braid
Applications: High Pressure, Pressure Wash Hose
Cover: Blue Smooth, Non-Marking, Weather Resistant (PW6000BLU)
Black Smooth, Weather Resistant (PW6000)
Reinforcement: Two Wire Braids
Temperature: -40F to +300F (-40C to +150C)
Coupling Series: Grip Crimp Pressure Wash Bite to the Wire pg C10
Hose
I.D.
Hose
O.D.
Working
Pressure
(Lbs.)
Min. Burst
Pressure
(Lbs.)
Min. Bend
Radius (In.)
Weight Per
Hundred Feet
Reel
Footage
3/8”
0.675
6,000
23,200
4
29 lbs.
600’
IMPORT THIN COVER
PRESSURE WASH HOSE
ASSEMBLIES
Applications: Medium or High Pressure, Pressure Wash Hose
Cover: Blue Smooth, Non-Marking, Weather Resistant or
Black Smooth, Weather Resistant
Reinforcement: One or Two Wire Braids
Temperature: -40F to +300F (-40C to +150C)
Coupling Series: Grip Crimp Pressure Wash Bite to the Wire pg C10
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
Working
Pressure
4000 psi
4000 psi
4000 psi
4000 psi
6000 psi
6000 psi
Assembly
Length
50’
100’
50’
100’
50’
100’
Coupling
#1
1/4” NPTF
1/4” NPTF
3/8” NPTF
3/8” NPTF
3/8” NPTF
3/8” NPTF
Coupling
#2
1/4” NPTF Swivel
1/4” NPTF Swivel
3/8” NPTF Swivel
3/8” NPTF Swivel
3/8” NPTF Swivel
3/8” NPTF Swivel
Blue
Part #
PW4450BLU
PW44100BLU
PW6450BLU
PW64100BLU
PW6650BLU
PW66100BLU
Black
Part#
PW4450
PW44100
PW6450
PW64100
PW6650
PW66100
Custom assemblies available at quantity pricing.
Pressure wash grips on page F-3.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
A-18
Bulk Hose Cross Reference pages J1-J4.
Thread
Size
1/4-18
3/8-18
1/2-14
1/2-14
3/4-14
1-11 1/2
Nut
Hex
5/8”
3/4”
7/8”
7/8”
1-1/4”
1-3/8”
Part
No.
4206V
6209V
6251V
8209V
12209V
16209V
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
3/4”
Pipe
Size
1/8”
1/4”
1/4”
3/8”
1/2”
1/2”
3/4”
Thread
Size
1/8-27
1/4-18
1/4-18
3/8-18
1/2-14
1/2-14
3/4-14
Hex
Size
5/8”
3/4”
3/4”
7/8”
1”
1”
1-1/4”
Part
No.
436V
412V
663V
612V
688V
812V
1212V
Refrigerant
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
Pipe
Size
1/4”
3/8”
1/2”
3/4”
Thread
Size
1/4-18
3/8-18
1/2-14
3/4-14
Hex
Size
5/8”
11/16”
7/8”
1-1/8”
Part
No.
484V
684V
884V
1284V
Adapters
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
3/4”
1”
1-1/4”
Pipe
Size
1/4”
3/8”
1/2”
1/2”
3/4”
1”
1-1/4”
Thread
Size
1/4-18
3/8-18
1/2-14
1/2-14
3/4-14
1-11 1/2
1 1/4-11 1/2
Hex
Nut
Size
Hex
9/16” 11/16”
11/16” 7/8”
3/4”
1”
7/8”
1”
1-1/8” 1-1/4”
1-3/8” 1-1/2”
1-11/16”1-7/8” ”
E
F
Reusables, Pushon, Acces.
G
H
Fabrication Equipment
J
K
Thread Identification
Part
No.
409V
606V
648V
806V
1206V
1606V
2008V
Cross Reference
* Note: Swivel for installation purposes only.
Leakage may occur at low pressure.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Nut
Hex
3/4”
7/8”
1”
1-1/4”
D
Part
No.
462V
406V
466V
666V
609V
651V
857V
809V
1209V
1609V
Pipe
Size
1/4”
3/8”
1/2”
1/2”
3/4”
1”
Thermoplastic
Nut
Hex
5/8”
5/8”
3/4”
3/4”
3/4”
7/8”
3/4”
7/8”
1-1/4”
1-3/8”
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
3/4”
1”
C
Hex
Size
9/16”
9/16”
11/16”
11/16”
11/16”
3/4”
13/16”
13/16”
1-1/8”
1-3/8”
Part
No.
400V
403V
415V
439V
600V
603V
603VLN
615V
866V
800V
803V
854V
1000V
1003V
1200V
1203V
1254V
1603V
1600V
2000V
Grip Crimp
Thread
Size
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
1-11 1/2
Hex
Size
9/16”
9/16”
11/16”
7/8”
3/4”
3/4”
3/4”
7/8”
7/8”
7/8”
7/8”
1-1/8”
15/16”
1-1/8”
1-1/8”
1-1/8”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
B
Pipe
Size
1/8”
1/4”
3/8”
1/4”
3/8”
1/2”
3/8”
1/2”
3/4”
1”
Thread
Size
1/8-27
1/4-18
3/8-18
1/2-14
1/4-18
3/8-18
3/8-18 LN
1/2-14
1/4-18
3/8-18
1/2-14
3/4-14
1/2-14
3/4-14
1/2-14
3/4-14
1-11 1/2
3/4-14
1-11 1/2
1 1/4-11 1/2
Vari-Crimp
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Pipe
Size
1/8”
1/4”
3/8”
1/2”
1/4”
3/8”
3/8”
1/2”
1/4”
3/8”
1/2”
3/4”
1/2”
3/4”
1/2”
3/4”
1”
3/4”
1”
1-1/4”
A
Hose
I.D.
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/4”
1”
1”
1-1/4”
Bulk Hose
Hydraulic Hose ends for 100R1 thin cover (57 MB-1,56MB-1),
100R2 thin cover (57 MB-2, 56MB-2), 2SN (1/4”-5/8”),
HY-PLUS I (HPI), & III (HPIII), 100R16/2SC (R16), 100R17
(R17), Dura-Hyd R16, R17, & EX (DH16, DH17, DHEX16),
100R3 (3319A), and 100R4 (104MB) hose. For 1-1/2” and 2”
100R2 Thin Cover (56MB-2) see Bite to Wire GW Spiral Hose
Couplings on pages B10-B14. The Vari-Crimp coupling is
compatible with virtually all Crimp Machines.
Cross reference pages J5-J7.
Trivalent Zinc Plating
B-1
Hydraulic Hose ends for 100R1 thin cover (57 MB-1,56MB-1),
100R2 thin cover (57 MB-2, 56MB-2), 2SN (1/4”-5/8”),
HY-PLUS I (HPI), & III (HPIII), 100R16/2SC (R16), 100R17
(R17), Dura-Hyd R16, R17, & EX (DH16, DH17, DHEX16),
100R3 (3319A), and 100R4 (104MB) hose. For 1-1/2” and 2”
100R2 Thin Cover (56MB-2) see Bite to Wire GW Spiral Hose
Couplings on pages B10-B14. The Vari-Crimp coupling is
compatible with virtually all Crimp Machines.
Cross reference pages J5-J7.
Trivalent Zinc Plating
Hose
I.D.
1/4”
3/8”
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
3/4”
1”
1”
1-1/4”
Thread
Size
1/2-27
1/2-27
Thread
Size
7/16x20
1/2x20
9/16x18
9/16x18
3/4x16
7/8x14
3/4x16
7/8x14
1-1/16x12
3/4x16
7/8x14
1-1/16x12
7/8x14
1-1/16x12
1-3/16x12
1-5/16x12
1-3/16x12
1-5/16x12
1-5/8x12
Tube
O.D.
1/4”
5/16”
3/8”
3/8”
1/2”
5/8”
1/2”
5/8”
3/4”
1/2”
5/8”
3/4”
5/8”
3/4”
7/8”
1”
7/8”
1”
1-1/4”
Hex
Size
3/4”
3/4”
Hex
Size
9/16”
9/16”
5/8”
11/16”
3/4”
7/8”
7/8”
7/8”
1-1/8”
15/16”
15/16”
1-1/8”
1-1/8”
1-1/8”
1-3/8”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part
No.
445V
660V
Part
No.
418V
421V
430V
618V
621V
669V
815V
818V
848V
1012V
1018V
1015V
1218V
1215V
1260V
1233V
1615V
1612V
2015V
Hose
I.D.
3/16”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
3/4”
1”
1”
1”
1-1/4”
Thread
Size
7/16x20
7/16x20
1/2x20
9/16x18
7/16x20
9/16x18
3/4x16
7/8x14
1-1/16x12
9/16x18
3/4x16
7/8x14
1-1/16x12
1-5/16x12
3/4x16
7/8x14
1-1/16x12
7/8x14
1-1/16x12
1-3/16x12
1-5/16x12
1-1/16x12
1-5/16x12
1-5/8x12
1-5/8x12
Tube
O.D.
1/4”
1/4”
5/16”
3/8”
1/4”
3/8”
1/2”
5/8”
3/4”
3/8”
1/2”
5/8”
3/4”
1”
1/2”
5/8”
3/4”
5/8”
3/4”
7/8”
1”
3/4”
1”
1-1/4”
1-1/4”
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
1/2”
Thread
Size
7/16x20
9/16x18
3/4x16
3/4x16
7/8x14
Tube
O.D.
1/4”
3/8”
1/2”
1/2”
5/8”
B-2
Hex
Size
5/8”
9/16”
9/16”
9/16”
11/16”
11/16”
11/16”
7/8”
1”
13/16”
13/16”
7/8”
1-1/8”
1-1/4”
15/16”
15/16”
1-1/8”
1-1/8”
1-1/8”
1-1/4”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
1-11/16”
Nut
Hex
9/16”
9/16”
5/8”
11/16”
9/16”
11/16”
7/8”
1”
1-1/4”
11/16”
7/8”
1”
1-1/4”
1-1/2”
7/8”
1”
1-1/4”
1”
1-1/4”
1-1/2”
1-1/2”
1-1/4”
1-1/2”
2”
2”
Part
No.
324V
424V
427V
433V
675V
627V
630V
657V
691V
842V
824V
827V
845V
863V
1024V
1027V
1021V
1230V
1221V
1245V
1236V
1621V
1618V
1624V
2005V
Nut
Hex
5/8”
11/16”
7/8”
7/8”
1”
Part
No.
4224V
6227V
6230V
8224V
8227V
A
Bulk Hose
B
Vari-Crimp
Hydraulic Hose ends for 100R1 thin cover (57 MB-1,56MB-1),
100R2 thin cover (57 MB-2, 56MB-2), 2SN (1/4”-5/8”),
HY-PLUS I (HPI), & III (HPIII), 100R16/2SC (R16), 100R17
(R17), Dura-Hyd R16, R17, & EX (DH16, DH17, DHEX16),
100R3 (3319A), and 100R4 (104MB) hose. For 1-1/2” and 2”
100R2 Thin Cover (56MB-2) see Bite to Wire GW Spiral Hose
Couplings on pages B10-B14. The Vari-Crimp coupling is
compatible with virtually all Crimp Machines.
Cross reference pages J5-J7.
Trivalent Zinc Plating
Continued from bottom left column
Part
No.
4151V
6127V
8127V
8154V
A-Drop
Inches
1.80
1.80
2.18
1.80
2.18
2.50
2.50
2.75
2.75
3.73
4.50
Nut
Hex
9/16”
5/8”
11/16”
9/16”
11/16”
7/8”
7/8”
1”
1”
1-1/4”
1-1/2”
Part
No.
4163V
4166V
4178V*
6190V
6166V*
6124V
8163V
8166V
1069V
12657V*
16657V*
Hose
I.D.
3/8”
3/4”
Thread
Size
5/8x18
1-1/16x14
Tube
O.D.
3/8”
3/4”
Hex
Size
3/4”
1-1/8”
J
Tube
O.D.
1/4”
5/16”
3/8”
1/4”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
1”
K
B-3
Part
No.
624V
1242V
Thread Identification
* JIC Seat & Thread only
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Cross Reference
Thread
Size
7/16x20
1/2x20
9/16x18
7/16x20
9/16x18
3/4x16
3/4x16
7/8x14
7/8x14
1-1/16x12
1-5/16x12
H
Part
No.
4130V
4157V
4160V*
6187V
6133V
6160V*
6163V
8133V
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
5/8”
3/4”
1”
Fabrication Equipment
Nut
Hex
9/16”
5/8”
11/16”
9/16”
5/8”
11/16”
7/8”
7/8”
Part
No.
4132V
6162V*
8134V
12653V*
16653V*
G
A-Drop
Inches
0.81
0.83
0.91
0.81
0.83
0.91
1.15
1.15
Nut
Hex
9/16”
11/16”
7/8”
1-1/4”
1-1/2”
Adapters
Tube
O.D.
1/4”
5/16”
3/8”
1/4”
5/16”
3/8”
1/2”
1/2”
A-Drop
Inches
1.26
1.50
1.63
2.28
2.79
F
Part
No.
4127V
4154V
4181V*
6184V
6130V
6157V*
6169V
8130V
8157V
1057V
1063V*
12612V*
12663V*
16612V*
20697V
Tube
O.D.
1/4”
3/8”
1/2”
3/4”
1”
Reusables, Pushon, Acces.
Nut
Hex
9/16”
5/8”
11/16”
9/16”
5/8”
11/16”
7/8”
7/8”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
Thread
Size
7/16x20
9/16x18
3/4x16
1-1/16x12
1-5/16x12
E
A-Drop
Inches
0.47
0.53
0.59
0.47
0.53
0.59
0.71
0.71
0.84
0.68
0.78
1.12
1.15
1.15
1.69
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
1”
Refrigerant
Tube
O.D.
1/4”
5/16”
3/8”
1/4”
5/16”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
1”
1”
1-1/4”
Part
No.
8160V
1060V
1066V*
12660V
12651V*
12666V*
16651V*
20677V
D
Hose Thread
I.D.
Size
1/4”
7/16x20
1/4”
1/2x20
1/4”
9/16x18
3/8”
7/16x20
3/8”
1/2x20
3/8”
9/16x18
3/8”
3/4x16
1/2”
3/4x16
continued at top
Nut
Hex
5/8”
5/8”
7/8”
1”
Nut
Hex
1”
1”
1-1/4”
1”
1-1/4”
1-1/2”
1-1/2”
2”
Thermoplastic
Thread
Size
7/16x20
1/2x20
9/16x18
7/16x20
1/2x20
9/16x18
3/4x16
3/4x16
7/8x14
7/8x14
1-1/16x12
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
Tube
O.D.
5/16”
5/16”
1/2”
5/8”
Tube Drop
O.D. Inches
5/8”
1.23
5/8”
1.23
3/4”
1.88
5/8”
1.23
3/4”
1.88
1”
2.20
1”
2.20
1-1/4” 3.31
C
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
1”
1-1/4”
Thread
Size
1/2x20
1/2x20
3/4x16
7/8x14
Thread
Size
7/8x14
7/8x14
1-1/16x12
7/8x14
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
Grip Crimp
Hose
I.D.
1/4”
3/8”
1/2”
1/2”
Hose
I.D.
1/2”
5/8”
5/8”
3/4”
3/4”
3/4”
1”
1-1/4”
Hydraulic Hose ends for 100R1 thin cover (57 MB-1,56MB-1),
100R2 thin cover (57 MB-2, 56MB-2), 2SN (1/4”-5/8”),
HY-PLUS I (HPI), & III (HPIII), 100R16/2SC (R16), 100R17
(R17), Dura-Hyd R16, R17, & EX (DH16, DH17, DHEX16),
100R3 (3319A), and 100R4 (104MB) hose. For 1-1/2” and 2”
100R2 Thin Cover (56MB-2) see Bite to Wire GW Spiral Hose
Couplings on pages B10-B14. The Vari-Crimp coupling is
compatible with virtually all Crimp Machines.
Cross reference pages J5-J7.
Trivalent Zinc Plating
Hose
I.D.
1/4”
3/8”
3/4”
Thread
Size
5/8x18
5/8x18
1-1/16x14
Tube
O.D.
3/8”
3/8”
3/4”
Hex
Size
5/8”
11/16”
1-1/8”
Hose
I.D.
3/8”
Thread
Size
5/8x18
Tube
O.D.
3/8”
A-Drop Nut
Inches Hex
.59
3/4”
Part
No.
6148V
Hose
I.D.
3/8”
3/8”
Thread
Size
5/8x18
5/8x18
Tube
O.D.
3/8”
3/8”
A-Drop
Inches
0.91
2.18
Part
No.
6151V
6172V
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
1”
Thread
Size
7/16x20
1/2x20
9/16x18
9/16x18
3/4x16
7/8x14
3/4x16
7/8x14
1-1/16x12
3/4x16
7/8x14
1-1/16x12
7/8x14
1-1/16x12
1-5/16x12
Tube
O.D.
1/4”
5/16”
3/8”
3/8”
1/2”
5/8”
1/2”
5/8”
3/4”
1/2”
5/8”
3/4”
5/8”
3/4”
1”
Nut
Hex
13/16”
3/4”
1-1/4”
Nut
Hex
3/4”
3/4”
Hex
Size
9/16”
5/8”
11/16”
11/16”
7/8”
1”
7/8”
1”
1-1/4”
15/16”
1”
1-1/4”
1-1/8”
1-1/4”
1-1/2”
Part
No.
442V
633V
1224V
Part
No.
451V
454V
448V
636V
639V
642V
830V
833V
860V
1030V
1033V
1036V
1248V
1227V
1630V
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Thread
Size
7/16x20
9/16x18
3/4x16
3/4x16
7/8x14
1-1/16x12
1-5/16x12
Tube
O.D.
1/4”
3/8”
1/2”
1/2”
5/8”
3/4”
1”
Hose
I.D.
3/8”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Thread
Size
9/16x18
3/4x16
7/8x14
3/4x16
7/8x14
1-1/16x12
1-5/16x12
Tube
O.D.
3/8”
1/2”
5/8”
1/2”
5/8”
3/4”
1”
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Thread
Size
7/16x20
1/2x20
1/2x20
9/16x18
3/4x16
3/4x16
7/8x14
1-1/16x12
1-5/16x12
Tube
Size
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
1”
* Note: Swivel for installation purposes only. Leakage may occur at low pressure.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
B-4
Hex
Size
9/16”
11/16”
3/4”
13/16”
13/16”
1-1/8”
1-3/8”
Tube Hex
O.D.
Size
1/4”
9/16”
5/16” 5/8”
5/16” 11/16”
3/8”
11/16”
1/2”
3/4”
1/2”
7/8”
5/8”
15/16”
3/4”
1-1/8”
1”
1-3/8”
Nuts and Sleeves
Nut
Part No.
718x4
718x5
718x6
718x8
718x10
718x12
718x16
Nut
Hex
5/8”
3/4”
7/8”
7/8”
1”
1-1/4”
1-1/2”
Part
No.
457V
678V
645V
836V
839V
1239V
1639V
Nut
Hex
3/4”
7/8”
1”
7/8”
1”
1-1/4”
1-1/2”
Part
No.
6278V
6245V
6242V
8236V
8239V
12239V
16239V
Nut
Hex
9/16”
5/8”
5/8”
11/16”
7/8”
7/8”
1”
1-1/4”
1-1/2”
Part
No.
4100V
4103V
6103V
6106V
6800V
8103V
8106V
12100V
16100V
Sleeve
Part No.
719x4
719x5
719x6
719x8
719x10
719x12
719x16
Part
No.
4J34V
6J36V
6J38V
8J36V
8J38V
12J42V
16J46V
20J50V
B-5
K
Nut
Hex
11/16”
13/16”
15/16”
13/16”
15/16”
1-3/8”
1-5/8”
1-7/8”
Thread Identification
A-Drop
Inches
1.26
1.51
1.62
1.51
1.62
2.28
2.78
3.09
J
Tube
O.D.
1/4”
3/8”
1/2”
3/8”
1/2”
3/4”
1”
1-1/4”
Cross Reference
Thread
Size
9/16x18
11/16x16
13/16x16
11/16x16
13/16x16
1-3/16x12
1-7/16x12
1-11/16x12
H
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
1-1/4”
Fabrication Equipment
Part
No.
4A24V
4A26V
6A24V
6A26V
6A28V
8A26V
8A28V
8A30V
10A30V
10A32V
12A30V
12A32V
12A36V
16A36V
20A40V
G
Nut
Hex
11/16”
13/16”
11/16”
13/16”
15/16”
13/16”
15/16”
1-1/8”
1-1/8”
1-3/8”
1-1/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
Adapters
A-Drop
Inches
0.78
0.90
0.78
0.90
1.15
0.90
1.15
1.27
1.27
1.88
1.27
1.88
2.20
2.20
2.51
F
Tube
O.D.
1/4”
3/8”
1/4”
3/8”
1/2”
3/8”
1/2”
5/8”
5/8”
3/4”
5/8”
3/4”
1”
1”
1-1/4”
Reusables, Pushon, Acces.
Thread
Size
9/16x18
11/16x16
9/16x18
11/16x16
13/16x16
11/16x16
13/16x16
1x14
1x14
1-3/16x12
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
E
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/4”
1”
1-1/4”
Refrigerant
Nut
Hex
11/16”
13/16”
15/16”
11/16”
13/16”
15/16”
13/16”
15/16”
1-1/8”
1-3/8”
1-1/8”
1-3/8”
1-1/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
Part
No.
4L64V
4L66V
6L66V
6L68V
8L66V
8L68V
8L70V
10L70V
10L72V
12L70V
12L72V
12L76V
16L76V
20L80V
D
Tube
O.D.
1/4”
3/8”
1/2”
1/4”
3/8”
1/2”
3/8”
1/2”
5/8”
3/4”
5/8”
3/4”
5/8”
3/4”
1”
1”
1-1/4”
Nut
Hex
11/16”
13/16”
13/16”
15/16”
13/16”
15/16”
1-1/8”
1-1/8”
1-3/8”
1-1/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
Thermoplastic
Part
No.
4S64V
4S66V
4S68V
6S64V
6S66V
6S68V
8S66V
8S68V
8S70V
8S72V
10S70V
10S72V
12S70V
12S72V
12S76V
16S76V
20S80V
Thread
Size
9/16x18
11/16x16
13/16x16
9/16x18
11/16x16
13/16x16
11/16x16
13/16x16
1x14
1-3/16x12
1x14
1-3/16x12
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
A-Drop
Inches
0.41
0.43
0.43
0.60
0.43
0.59
0.68
0.68
0.83
0.68
0.83
1.15
1.15
1.07
C
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/4”
1”
1-1/4”
Tube
O.D.
1/4”
3/8”
3/8”
1/2”
3/8”
1/2”
5/8”
5/8”
3/4”
5/8”
3/4”
1”
1”
1-1/4”
Grip Crimp
Part
No.
4E64V
6E66V
6E68V
8E68V
8E70V
8E72V
10E70V
10E72V
12E72V
16E76V
Thread
Size
9/16x18
11/16x16
11/16x16
13/16x16
11/16x16
13/16x16
1x14
1x14
1-3/16x12
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
B
Hose Thread
Tube Hex
I.D.
Size
O.D.
Size
1/4”
9/16x18
1/4”
5/8”
3/8”
11/16x16
3/8”
3/4”
3/8”
13/16x16
1/2”
7/8”
1/2”
13/16x16
1/2”
7/8”
1/2”
1x14
5/8”
1-1/16”
1/2”
1-3/16x12
3/4”
1-1/4”
5/8”
1x14
5/8”
1-1/16”
5/8”
1-3/16x12
3/4”
1-1/4”
3/4”
1-3/16x12
3/4”
1-1/4”
1”
1-7/16x12
1”
1-1/2”
Couplings are capped with O-ring included.
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/4”
1”
1-1/4”
Vari-Crimp
Part
No.
44SV
66SV
88SV
1212SV
1616SV
A
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
1”
Bulk Hose
Hydraulic Hose ends for 100R1 thin cover (57 MB-1,56MB-1),
100R2 thin cover (57 MB-2, 56MB-2), 2SN (1/4”-5/8”),
HY-PLUS I (HPI), & III (HPIII), 100R16/2SC (R16), 100R17
(R17), Dura-Hyd R16, R17, & EX (DH16, DH17, DHEX16),
100R3 (3319A), and 100R4 (104MB) hose. For 1-1/2” and 2”
100R2 Thin Cover (56MB-2) see Bite to Wire GW Spiral Hose
Couplings on pages B10-B14. The Vari-Crimp coupling is
compatible with virtually all Crimp Machines.
Cross reference pages J5-J7.
Trivalent Zinc Plating
Hydraulic Hose ends for 100R1 thin cover (57 MB-1,56MB-1),
100R2 thin cover (57 MB-2, 56MB-2), 2SN (1/4”-5/8”),
HY-PLUS I (HPI), & III (HPIII), 100R16/2SC (R16), 100R17
(R17), Dura-Hyd R16, R17, & EX (DH16, DH17, DHEX16),
100R3 (3319A), and 100R4 (104MB) hose. For 1-1/2” and 2”
100R2 Thin Cover (56MB-2) see Bite to Wire GW Spiral Hose
Couplings on pages B10-B14. The Vari-Crimp coupling is
compatible with virtually all Crimp Machines.
Cross reference pages J5-J7.
Trivalent Zinc Plating
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
5/8”
3/4”
1”
Thread
Size
9/16x18
11/16x16
11/16x16
13/16x16
13/16x16
1x14
1x14
1-3/16x12
1-7/16x12
Tube
O.D.
1/4”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
1”
A-Drop
Inches
1.80
2.13
2.13
2.51
2.51
2.76
2.76
3.78
4.50
Nut
Hex
11/16”
13/16”
13/16”
15/16”
15/16”
1-1/8”
1-1/8”
1-3/8”
1-5/8”
Part
No.
4A64V
4A66V
6A66V
6A68V
8A68V
8A70V
10A70V
12A72V
16A76V
“O” Ring
For ORF Seal
Couplings
Thread
Size
9/16x18
11/16x16
13/16x16
1x14
1-3/16x12
1-7/16x12
1-11/16x12
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
Thread
Size
3/8x24
7/16x24
1/2x20
7/16x24
1/2x20
5/8x18
11/16x18
3/4x18
7/8x18
Tube
O.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
Tube
O.D.
3/16”
1/4”
5/16”
1/4”
5/16”
3/8”
7/16”
1/2”
5/8”
Part
No.
4629x4
4629x6
4629x8
4629x10
4629x12
4629x16
4629x20
Nut
Hex
3/8”
7/16”
1/2”
7/16”
1/2”
5/8”
11/16”
3/4”
7/8”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part
No.
4169V
4106V
4133V
6175V
6109V
6136V
6193V
8109V
8136V
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
Thread
Size
3/8x24
7/16x24
1/2x20
7/16x24
1/2x20
5/8x18
11/16x18
3/4x18
7/8x18
Tube
O.D.
3/16”
1/4”
5/16”
1/4”
5/16”
3/8”
7/16”
1/2”
5/8”
A-Drop
Inches
0.69
1.08
1.10
0.93
1.10
1.03
1.34
1.13
0.92
Nut
Hex
3/8”
7/16”
1/2”
7/16”
1/2”
5/8”
11/16”
3/4”
7/8”
Part
No.
4172V
4109V
4136V
6178V
6112V
6139V
6196V
8112V
8139V
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
Thread
Size
3/8x24
7/16x24
1/2x20
7/16x24
1/2x20
5/8x18
11/16x18
3/4x18
7/8x18
Tube
O.D.
3/16”
1/4”
5/16”
1/4”
5/16”
3/8”
7/16”
1/2”
5/8”
A-Drop
Inches
1.06
1.23
1.38
1.36
1.38
1.63
1.97
2.20
1.75
Nut
Hex
3/8”
7/16”
1/2”
7/16”
1/2”
5/8”
11/16”
3/4”
7/8”
Part
No.
4175V
4112V
4139V
6181V
6115V
6142V
6199V
8115V
8142V
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Tube
Size
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Tube
Rise
1.10
1.30
1.58
1.34
1.17
1.30
Hex
Size
5/8”
3/4”
7/8”
1”
1-1/8”
1-3/8”
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
B-6
Part
No.
4T04V
6T06V
8T08V
10T10V
12T12V
16T16V
Part
No.
8G08V
8G12V
12G12V
12G16V
16G16V
16G20V
20G20V
Complete
Kit No.
SFK-8
SFK-12
SFK-16
SFK-20
SFK-24
SFK-32
J
Cross Reference
K
Thread Identification
Hose BSPT Thread
Hex
Part
I.D.
Size
Size
Size
No.
1/4”
1/4”
R-1/4-19
5/8”
4T54V
3/8”
3/8”
R-3/8-19
3/4”
6T56V
1/2”
1/2”
R-1/2-14
7/8”
8T58V
3/4”
3/4”
R-3/4-14
1-1/8”
12T62V
R. as part of thread size is ISO designation for tapered thread
Hose BSPP Thread
A-Drop Nut
Part
I.D.
Size
Size
Inches Hex
No.
1/4”
1/4”
G-1/4-19
0.91
3/4”
4P44V
3/8”
3/8”
G-3/8-19
0.90
7/8”
6P46V
1/2”
1/2”
G-1/2-14
0.87
1”
8P48V
3/4”
3/4”
G-3/4-14
1.31
1-1/4” 12P52V
G. as part of thread size is ISO designation for parallel thread
H
C
11/32
13/32
13/32
15/32
17/32
17/32
Fabrication Equipment
B
.69
.88
1.03
1.19
1.41
1.69
G
A
1.50
1.88
2.06
2.31
2.75
3.06
Adapters
Flange
Size
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
F
Split Flange Kits
(Code 61)
Hose BSPP Thread
Hex
Nut
Part
I.D.
Size
Size
Size
Hex
No.
1/4”
1/4”
G-1/4-19
9/16” 3/4”
481V
1/4”
3/8”
G-3/8-19
3/4”
7/8”
486V
3/8”
3/8”
G-3/8-19
3/4”
7/8”
681V
3/8”
1/2”
G-1/2-14
3/4”
1”
694V
1/2”
1/2”
G-1/2-14
7/8”
1”
881V
5/8”
5/8”
G-5/8-14
15/16” 1-3/16” 1081V
O Ring Part 3/4”
3/4”
G-3/4-14
1-1/8” 1-1/4” 1281V
No.
1”
1”
G-1-11
1-3/8” 1-1/2” 1681V
8252
1-1/4” 1-1/4” G-1-1/4-11
1-11/16”1-7/8” 2081V
12252
G. as part of thread size is ISO designation for parallel thread
16252
20252
24252
32252
Reusables, Pushon, Acces.
Part
No.
8G71V
8G72V
12G72V
12G76V
16G76V
16G80V
20G80V
E
B
Drop
1.62
1.68
2.12
2.12
2.38
2.38
2.62
Refrigerant
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
D
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
Hose BSPP Thread
Hex
Part
I.D.
Size
Size
Size
No.
1/4”
1/4”
G-1/4-19
11/16”
4P54V
3/8”
3/8”
G-3/8-19
3/4”
6P56V
3/8”
1/2”
G-1/2-14
1”
6P58V
1/2”
3/8”
G-3/8-19
7/8”
8P56V
1/2”
1/2”
G-1/2-14
1”
8P58V
3/4”
3/4”
G-3/4-14
1-1/8”
12P62V
G. as part of thread size is ISO designation for parallel thread
Thermoplastic
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
C
Part
No.
8G41V
8G42V
12G42V
12G46V
16G46V
16G50V
20G50V
Grip Crimp
B
Drop
0.78
0.82
1.00
1.00
1.12
1.12
1.12
B
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
Vari-Crimp
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
A
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
Bulk Hose
Hydraulic Hose ends for 100R1 thin cover (57 MB-1,56MB-1),
100R2 thin cover (57 MB-2, 56MB-2), 2SN (1/4”-5/8”),
HY-PLUS I (HPI), & III (HPIII), 100R16/2SC (R16), 100R17
(R17), Dura-Hyd R16, R17, & EX (DH16, DH17, DHEX16),
100R3 (3319A), and 100R4 (104MB) hose. For 1-1/2” and 2”
100R2 Thin Cover (56MB-2) see Bite to Wire GW Spiral Hose
Couplings on pages B10-B14. The Vari-Crimp coupling is
compatible with virtually all Crimp Machines.
Cross reference pages J5-J7.
Trivalent Zinc Plating
Couplamatic Systems Inc. Hydraulic Catalog 4010.
B-7
Hydraulic Hose ends for 100R1 thin cover (57 MB-1,56MB-1),
100R2 thin cover (57 MB-2, 56MB-2), 2SN (1/4”-5/8”),
HY-PLUS I (HPI), & III (HPIII), 100R16/2SC (R16), 100R17
(R17), Dura-Hyd R16, R17, & EX (DH16, DH17, DHEX16),
100R3 (3319A), and 100R4 (104MB) hose. For 1-1/2” and 2”
100R2 Thin Cover (56MB-2) see Bite to Wire GW Spiral Hose
Couplings on pages B10-B14. The Vari-Crimp coupling is
compatible with virtually all Crimp Machines.
Cross reference pages J5-J7.
Trivalent Zinc Plating
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
5/8”
Thread
Size
M16x1.5
M18x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2.0
Hose Tube Thread
Hex
Nut
Part
I.D.
Size
Size
Size
Hex
No.
1/4”
1/4”
G-1/4-19
9/16” 3/4”
4L04V
1/4”
3/8”
G-3/8-19
11/16” 7/8”
4L06V
3/8”
3/8”
G-3/8-19
11/16” 7/8”
6L06V
1/2”
1/2”
G-1/2-14
7/8”
1-1/16” 8L08V
3/4”
3/4”
G-3/4-14
1-1/8” 1-1/4” 12L12V
1”
1”
G-1-11
1-3/8” 1-1/2” 16L16V
G. as part of thread size is ISO designation of parallel thread
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
1/2”
5/8”
3/4”
1”
Tube
Size
6mm
8mm
10mm
10mm
12mm
15mm
18mm
22mm
28mm
Thread
Size
M12x1.5
M14x1.5
M16x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2.0
M36x2.0
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
1/2”
5/8”
3/4”
Tube
Size
8mm
10mm
10mm
12mm
15mm
18mm
22mm
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
1/2”
5/8”
3/4”
Tube
Size
8mm
10mm
10mm
12mm
15mm
18mm
22mm
Hose BSPP Thread
A-Drop Nut
Part
I.D.
Size
Size
Inches Hex
No.
1/4”
1/4”
G-1/4-19
1.50
3/4”
4P74V
3/8”
3/8”
G-3/8-19
1.60
7/8”
6P76V
1/2”
1/2”
G-1/2-14
1.89
1”
8P78V
5/8”
5/8”
G-5/8-14
1.83
1-3/16” 10P80V
3/4”
3/4”
G-3/4-14
2.49
1-1/4” 12P82V
1”
1”
G-1-11
2.98
1-1/2” 16P86V
G. as part of thread size is ISO designation of parallel thread
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
5/8”
3/4”
Thread
Size
M14x1.5
M18x1.5
M22x1.5
M24x1.5
M30x1.5
M33x1.5
M36x1.5
Thread
Size
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2.0
Tube
O.D.
8mm
10mm
12mm
15mm
18mm
22mm
Hex
Size
9/16”
11/16”
7/8”
1”
1-1/8”
1-3/8”
1-11/16”
Nut
Hex
3/4”
7/8”
1”
1-1/4”
1-3/8”
1-5/8”
1-7/8”
Hex
Size
9/16”
3/4”
3/4”
7/8”
1-1/16”
1-1/4”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part
No.
4K14V
6K18V
8K22V
10K24V
12K30V
16K33V
20K36V
Part
No.
4M08V
6M10V
6M12V
8M15V
10M18V
12M22V
B-8
Tube
O.D.
8mm
10mm
10mm
12mm
14mm
16mm
20mm
Hex
Size
11/16”
3/4”
3/4”
13/16”
7/8”
7/8”
1-1/4”
Part
No.
4M58V
4M60V
6M60V
6M62V
6M64V
8M66V
10M70V
Hex
Size
9/16”
9/16”
9/16”
11/16”
11/16”
7/8”
15/16”
1-1/8”
1-3/8”
Nut
Hex
11/16”
11/16”
3/4”
3/4”
7/8”
1-1/16”
1-1/4”
1-1/2”
1-7/8”
Part
No.
4C06V
4C08V
4C10V
6C10V
6C12V
8C15V
10C18V
12C22V
16C28V
Thread
Size
M14x1.5
M16x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2.0
A-Drop
Inches
0.96
0.96
0.96
1.00
1.18
1.25
1.41
Nut
Hex
11/16”
3/4”
3/4”
7/8”
1-1/16”
1-1/4”
1-1/2”
Part
No.
4D08V
4D10V
6D10V
6D12V
8D15V
10D18V
12D22V
Thread
Size
M14x1.5
M16x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2.0
A-Drop
Inches
1.48
1.65
1.65
1.65
1.93
2.31
2.70
Nut
Hex
11/16”
3/4”
3/4”
7/8”
1-1/16”
1-1/4”
1-1/2”
Part
No.
4D58V
4D60V
6D60V
6D62V
8D65V
10D68V
12D72V
A
Bulk Hose
B
Vari-Crimp
Hydraulic Hose ends for 100R1 thin cover (57 MB-1,56MB-1),
100R2 thin cover (57 MB-2, 56MB-2), 2SN (1/4”-5/8”),
HY-PLUS I (HPI), & III (HPIII), 100R16/2SC (R16), 100R17
(R17), Dura-Hyd R16, R17, & EX (DH16, DH17, DHEX16),
100R3 (3319A), and 100R4 (104MB) hose. For 1-1/2” and 2”
100R2 Thin Cover (56MB-2) see Bite to Wire GW Spiral Hose
Couplings on pages B10-B14. The Vari-Crimp coupling is
compatible with virtually all Crimp Machines.
Cross reference pages J5-J7.
Trivalent Zinc Plating
Vari-Crimp Crimp Diameter Charts:
Clamp Sleeve
1/4”
3/8”
1/2”
5/8”
3/4”
1”
0.520
0.695
0.835
1.010
1.135
1.425
1/4”
3/8”
1/2”
3/4”
1”
0.615
0.790
0.950
1.240
1.520
3/4”
1”
1-1/4”
1.230
1.520
1.785
Reduced OD 100R17 (R17)
(1/4”-1”)
100R3 (3319A)
(1/4”-1”)
(for routing)
100R4 (104MB)
(3/4”-1-1/4”)
K
Thread Identification
Hose
Part
I.D.
No.
1/4”
19VN
3/8”
25VN
1/2”
29VN
5/8”
35VN
3/4”
39VN
For use with 100R1AT & 100R2AT to provide support for
routing clamps.
J
0.610
0.790
0.915
1.050
1.200
1.520
1.850
Cross Reference
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
H
Part
No.
4H60V
6H62V
6H64V
8H66V
10H70V
100R2AT (57MB-2)
(1/4”-1”)
100R2AT (56MB-2)
(1/4”-1-1/4”)
2SN (2SN)
(1/4”-5/8”)
Fabrication Equipment
Nut
Hex
7/8”
1”
1-1/16”
1-1/8”
1-1/2”
0.560
0.740
0.865
1.010
1.135
1.455
G
ADrop
1.50
1.95
2.07
2.05
2.38
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Adapters
Thread
Size
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2.0
Part
No.
4H10V
6H12V
8H16V
10H20V
100R16/2SC (R16)
(1/4”-1”)
Dura-Hyd R16/2SC (DH16)
(1/4”-1”)
Dura-Hyd EX R16/2SC (DHEX16)
(1/4”-1”)
F
Tube
Size
10mm
12mm
14mm
16mm
20mm
Nut
Hex
7/8”
1”
1-1/8”
1-1/2”
0.530
0.560
0.740
0.865
1.010
1.160
1.455
1.785
Reusables, Pushon, Acces.
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
5/8”
ADrop
0.96
1.13
1.25
1.50
3/16”
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
E
Thread
Size
M18x1.5
M20x1.5
M24x1.5
M30x2.0
Part
No.
4C58V
4C60V
6C60V
6C62V
6C64V
8C66V
10C70V
12C70V
12C75V
16C80V
Refrigerant
Tube
Size
10mm
12mm
16mm
20mm
Nut
Hex
3/4”
7/8”
7/8”
1”
1-1/16”
1-1/8”
1-1/2”
1-1/2”
1-5/8”
2”
D
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
Hex
Size
9/16”
5/8”
3/4”
3/4”
13/16”
7/8”
1-1/8”
1-1/8”
1-1/4”
1-11/16”
Thermoplastic
Thread
Size
M16x1.5
M18x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2.0
M30x2.0
M36x2.0
M42x2.0
Coupling
Crimp O.D.
C
Tube
Size
8mm
10mm
10mm
12mm
14mm
16mm
20mm
20mm
25mm
30mm
Hose
I.D.
Grip Crimp
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
5/8”
3/4”
3/4”
1”
Hose
Description
100R1AT (57MB-1)
(1/4”-1”)
100R1AT/1SN (56MB-1)
(1/4”-1-1/4”)
Hy-Plus I (HPI)
(1/4”-1”)
100R17 One Wire Dim. (R17R)
(1/4”-1/2”)
Dura-Hyd R17 (DH17)
(1/4”-3/4”)
Hy-Plus III (HPIII)
(1/4”-1”)
Couplamatic Systems Inc. Hydraulic Catalog 4010.
B-9
Bite to the Wire Hose Ends for 100R12 Four Spiral (SP580,
RC12, and DHEXR12), 100R2 Thin Cover (3/4” thru 2”),
2SN (3/4”-2”), and 100R4 (1-1/2” & 2”).
No skive required.
The GW Series Four Spiral Coupling is compatible with
some fixed and virtually all adjustable spiral crimp machines
on the market. Check crimp O.D. carefully.
Cross reference pages J8-J9.
Trivalent Zinc Plating
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
Pipe
Size
1/2”
3/4”
3/4”
1”
3/4”
1”
1-1/4”
1-1/2”
2”
Thread
Size
1/2-14
3/4-14
3/4-14
1-11 1/2
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
2-11 1/2
Hex
Size
7/8”
1-1/8”
1-1/8”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
2-1/8”
2-3/4”
Part
No.
GW01 8x8
GW01 8x12
GW01 12x12
GW01 12x16
GW01 16x12
GW01 16x16
GW01 20x20
GW01 24x24
GW01 32x32
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1-1/4”
1-1/2”
Tube
Size
1/2”
5/8”
3/4”
1”
1”
1-1/4”
1-1/2”
Thread
Size
3/4x16
7/8x14
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
1-7/8x12
A
Drop
0.71
0.84
1.12
1.15
1.15
1.69
1.70
Nut
Hex
7/8”
1”
1-1/4”
1-1/2”
1-1/2”
2”
2-1/4”
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1-1/4”
Tube
Size
1/2”
5/8”
3/4”
7/8”
1”
1”
1-1/4”
Thread
Size
3/4x16
7/8x14
1-1/16x12
1-3/16x12
1-5/16x12
1-5/16x12
1-5/8x12
Hex
Size
7/8”
7/8”
1-1/8”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
Part
No.
GW08 8x8
GW08 8x10
GW08 12x12
GW08 12x14
GW08 12x16
GW08 16x16
GW08 20x20
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1-1/4”
1-1/2”
2”
Tube
Size
1/2”
5/8”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
Thread
Size
3/4x16
7/8x14
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
1-7/8x12
2-1/2x12
A
Drop
1.15
1.23
1.88
2.20
2.66
3.31
3.95
4.64
Nut
Hex
7/8”
1”
1-1/4”
1-1/2”
1-1/2”
2”
2-1/4”
2-7/8”
Part
No.
GW26 8x8
GW26 8x10
GW26 12x12
GW26 12x16
GW26 16x16
GW26 20x20
GW26 24x24
GW26 32x32
Hose
I.D.
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
Tube
Size
3/8”
1/2”
5/8”
3/4”
3/4”
7/8”
1”
3/4”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
Hose
I.D.
3/4”
1”
Tube
Size
3/4”
1”
Thread
Size
1-1/16x12
1-5/16x12
A
Drop
3.73
4.50
Nut
Hex
1-1/4”
1-1/2”
Part
No.
GW27 12x12
GW27 16x16
Hose
I.D.
3/4”
1”
Tube
Size
3/4”
1”
Thread
Size
1-1/16x12
1-5/16x12
Hex
Size
1-1/8”
1-1/2”
Part
No.
GW11 12x12
GW11 16x16
Thread
Size
9/16x18
3/4x16
7/8x14
1-1/16x12
1-1/16x12
1-3/16x12
1-5/16x12
1-1/16x12
1-5/16x12
1-5/8x12
1-5/8x12
1-7/8x12
1-7/8x12
2-1/2x12
Hex
Size
7/8”
7/8”
7/8”
1-1/8”
1-1/8”
1-1/4”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
1-11/16”
1-7/8”
2-1/8”
2-3/4”
Nut
Hex
11/16”
7/8”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
1-1/4”
1-1/2”
2”
2”
2-1/4”
2-1/4”
2-7/8”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part
No.
GW09 8x6
GW09 8x8
GW09 8x10
GW09 8x12
GW09 12x12
GW09 12x14
GW09 12x16
GW09 16x12
GW09 16x16
GW09 16x20
GW09 20x20
GW09 20x24
GW09 24x24
GW09 32x32
B-10
Part
No.
GW25 8x8
GW25 8x10
GW25 12x12
GW25 12x16
GW25 16x16
GW25 20x20
GW25 24x24
Thread
Size
13/16x16
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
Nut
Hex
15/16”
1-1/8”
1-3/8”
1-5/8”
Part
No.
GW33 8x8
GW33 8x10
GW33 12x12
GW33 16x16
“O” Ring
For ORF Seal Couplings
Thread Size
13/16x16
1x14
1-3/16x12
1-7/16x12
1-11/16X12
Tube Size
1/2”
5/8”
3/4”
1”
1-1/4”
Hose
I.D.
3/4”
Thread
Size
G-3/4-14
“O” Ring
Part No.
4629x8
4629x10
4629x12
4629x16
4629x20
F
Tube
Size
1/2”
5/8”
3/4”
1”
1”
1-1/4”
Part
No.
GW30 8x8
GW30 8x10
GW30 8x12
GW30 12x10
GW30 12x12
GW30 12x16
GW30 16x16
GW30 20x20
GW30 24x24
A
Drop
2.51
2.76
3.78
4.50
Reusables, Pushon, Acces.
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1-1/4”
Nut
Hex
15/16”
1-1/8”
1-3/8”
1-1/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
2-1/4”
Thread
Size
13/16x16
1x14
1-3/16x12
1-7/16x12
E
Thread
Size
13/16x16
1x14
1-3/16x12
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
2x12
Tube
Size
1/2”
5/8”
3/4”
1”
Refrigerant
Tube
Size
1/2”
5/8”
3/4”
5/8”
3/4”
1”
1”
1-1/4”
1-1/2”
Hose
I.D.
1/2”
1/2”
3/4”
1”
D
Hose
I.D.
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1-1/4”
1-1/2”
Part
No.
GW29 8x8
GW29 12x12
GW29 16x16
Thermoplastic
Hex
Size
7/8”
1-1/4”
1-1/2”
C
Thread
Size
13/16x16
1-3/16x12
1-7/16x12
Grip Crimp
Tube
Size
1/2”
3/4”
1”
B
Hose
I.D.
1/2”
3/4”
1”
Vari-Crimp
The GW Series Four Spiral Coupling is compatible with
some fixed and virtually all adjustable spiral crimp machines
on the market. Check crimp O.D. carefully.
Cross reference pages J8-J9.
Trivalent Zinc Plating
A
No skive required.
Bulk Hose
Bite to the Wire Hose Ends for 100R12 Four Spiral (SP580,
RC12, and DHEXR12), 100R2 Thin Cover (3/4” thru 2”),
2SN (3/4”-2”), and 100R4 (1-1/2” & 2”).
BSPP
Size
3/4”
Hex
Size
1-1/8”
Part
No.
GW36 12x12
G. as part of thread size is ISO designation for parallel thread
H
Fabrication Equipment
Part
No.
GW31 8x8
GW31 8x10
GW31 12x12
GW31 12x16
GW31 16x16
GW31 20x20
G
Nut
Hex
15/16”
1-1/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
Adapters
A
Drop
0.59
0.68
0.84
1.14
1.14
1.07
A
Drop
1.15
1.27
1.27
1.88
2.20
2.20
2.51
Nut
Hex
15/16”
1-1/8”
1-1/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
Part
No.
GW32 8x8
GW32 8x10
GW32 12x10
GW32 12x12
GW32 12x16
GW32 16x16
GW32 20x20
Hex
Size
7/8”
1-1/8”
1-3/8”
Nut
Hex
1”
1-1/4”
1-1/2”
Part
No.
GW10 8x8
GW10 12x12
GW10 16x16
G. as part of thread size is ISO designation for parallel thread
K
Thread Identification
Thread
Size
13/16x16
1x14
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
Thread
Size
G-1/2-14
G-3/4-14
G-1-11
J
Tube
Size
1/2”
5/8”
5/8”
3/4”
1”
1”
1-1/4”
BSPP
Size
1/2”
3/4”
1”
Cross Reference
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1-1/4”
Hose
I.D.
1/2”
3/4”
1”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
B-11
Bite to the Wire Hose Ends for 100R12 Four Spiral (SP580,
RC12, and DHEXR12), 100R2 Thin Cover (3/4” thru 2”),
2SN (3/4”-2”), and 100R4 (1-1/2” & 2”).
No skive required.
The GW Series Four Spiral Coupling is compatible with
some fixed and virtually all adjustable spiral crimp machines
on the market. Check crimp O.D. carefully.
Cross reference pages J8-J9.
Trivalent Zinc Plating
Hose
I.D.
1/2”
Hose
BSPP
Thread
A
Nut
Part
1/2”
I.D.
Size
Size
Drop
Hex
No.
3/4”
3/4”
3/4”
G-3/4-14
1.31
1-1/4” GW43 12x12 3/4”
1”
G. as part of thread size is ISO designation for parallel thread
1”
1-1/4”
1-1/4”
1-1/2”
2”
Hose
I.D.
1/2”
3/4”
1”
Hose
I.D.
1/2”
3/4”
1”
Tube
Size
15mm
22mm
28mm
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
2.38
2.38
2.81
Part
No.
GW47 8x8
GW47 8x12
GW47 12x12
GW47 12x16
GW47 16x16
GW47 16x20
GW47 20x20
GW47 20x24
GW47 24x24
GW47 32x32
Thread
Size
M22x1.5
M30x1.5
M33x1.5
Hex
Size
7/8”
1-1/8”
1-3/8”
Nut
Hex
1”
1-3/8”
1-1/2”
Part
No.
GW39-8x22
GW39-12x30
GW39-16x33
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
A-Dia.
Inches
1.50
1.75
1.75
2.00
2.00
B
Drop
0.44
0.44
0.45
0.45
0.50
Part
No.
GW48 12x12
GW48 12x16
GW48 16x16
GW48 16x20
GW48 20x20
Thread
Size
M22x1.5
M30x2.0
M36x2.0
Hex
Size
7/8”
1-1/8”
1-3/8”
Nut
Hex
1-1/16”
1-1/2”
1-7/8”
Part
No.
GW37-8x15 Hose
GW37-12x22 I.D.
GW37-16x28 3/4”
1”
1-1/4”
Flange
Size
3/4”
1”
1-1/4”
A-Dia.
Inches
1.50
1.75
2.00
B
Drop
0.59
0.64
0.72
Part
No.
GW49 12x12
GW49 16x16
GW49 20x20
Hex
Size
7/8”
1-3/8”
1-11/16”
Nut
Hex
1-1/8”
1-7/8”
2”
Part
No.
GW38-8x16
GW38-12x25
GW38-16x30
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
2.38
2.38
2.81
B
Drop
0.78
0.82
1.00
1.00
1.12
1.12
1.15
1.50
1.41
2.08
Part
No.
GW50 8x8
GW50 8x12
GW50 12x12
GW50 12x16
GW50 16x16
GW50 16x20
GW50 20x20
GW50 20x24
GW50 24x24
GW50 32x32
(O-ring Included)
Hose
I.D.
1/2”
3/4”
1”
Tube
Size
16mm
25mm
30mm
Thread
Size
M24x1.5
M36x2.0
M42x2.0
Couplamatic Systems Inc. Hydraulic Catalog 4010.
B-12
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
A-Dia.
Inches
1.50
1.75
1.75
2.00
2.00
B
Drop
1.59
1.59
1.76
1.76
1.94
Part
No.
GW52 12x12
GW52 12x16
GW52 16x16
GW52 16x20
GW52 20x20
Hose
I.D.
3/4”
3/4”
Flange
Size
3/4”
1”
A-Dia.
Inches
1.50
1.75
B
Drop
2.33
2.33
Part
No.
GW55 12x12
GW55 12x16
Hose
I.D.
1”
1-1/4”
Flange
Size
1”
1-1/4”
A-Dia.
Inches
1.75
2.00
B
Drop
2.89
3.12
Part
No.
GW56 16x16
GW56 20x20
Hose
I.D.
3/4”
Flange
Size
3/4”
A-Dia.
Inches
1.50
B
Drop
3.00
Part
No.
GW57 12x12
D
Part
No.
GW51 12x12
GW51 12x16
GW51 16x16
GW51 16x20
GW51 20x20
Thermoplastic
B
Drop
1.38
1.38
1.51
1.51
1.69
C
A-Dia.
Inches
1.50
1.75
1.75
2.00
2.00
Grip Crimp
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
B
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
Vari-Crimp
The GW Series Four Spiral Coupling is compatible with
some fixed and virtually all adjustable spiral crimp machines
on the market. Check crimp O.D. carefully.
Cross reference pages J8-J9.
Trivalent Zinc Plating
A
No skive required.
Bulk Hose
Bite to the Wire Hose Ends for 100R12 Four Spiral (SP580,
RC12, and DHEXR12), 100R2 Thin Cover (3/4” thru 2”),
2SN (3/4”-2”), and 100R4 (1-1/2” & 2”).
E
Refrigerant
F
Reusables, Pushon, Acces.
B
Drop
3.75
3.12
4.62
4.00
Part
No.
GW54 12x12
GW54 12x16
GW54 16x16
GW54 20x20
Couplamatic Systems Inc. Hydraulic Catalog 4010.
B
.69
.88
1.03
1.19
1.41
1.69
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
A-Dia.
Inches
1.62
1.88
1.88
2.12
2.12
C
11/32
13/32
13/32
15/32
17/32
17/32
Complete
Kit No.
SFK-8
SFK-12
SFK-16
SFK-20
SFK-24
SFK-32
O-Ring
No.
8252
12252
16252
20252
24252
32252
Part
No.
GW60 12x12
GW60 12x16
GW60 16x16
GW60 16x20
GW60 20x20
K
A-Dia.
Inches
1.50
1.75
1.75
2.00
A
1.50
1.88
2.06
2.31
2.75
3.06
Thread Identification
Flange
Size
3/4”
1”
1”
1-1/4”
Flange
Size
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
J
Hose
I.D.
3/4”
3/4”
1”
1-1/4”
Split Flange Kits
(Code 61)
Cross Reference
Part
No.
GW53 8x8
GW53 8x12
GW53 12x12
GW53 12x16
GW53 16x16
GW53 16x20
GW53 20x20
GW53 20x24
GW53 24x24
GW53 32x32
H
B
Drop
1.63
1.68
2.12
2.12
2.38
2.38
2.62
3.25
3.12
4.64
Fabrication Equipment
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
2.38
2.38
2.81
G
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
Adapters
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
B-13
Bite to the Wire Hose Ends for 100R12 Four Spiral (SP580,
RC12, and DHEXR12), 100R2 Thin Cover (3/4” thru 2”),
2SN (3/4”-2”), and 100R4 (1-1/2” & 2”).
No skive required.
The GW Series Four Spiral Coupling is compatible with
some fixed and virtually all adjustable spiral crimp machines
on the market. Check crimp O.D. carefully.
Cross reference pages J8-J9.
Trivalent Zinc Plating
Hose
I.D.
3/4”
3/4”
1”
1-1/4”
Flange
Size
3/4”
1”
1”
1-1/4”
A-Dia.
Inches
1.62
1.88
1.88
2.12
B
Drop
1.27
1.29
1.34
1.68
Part
No.
GW61 12x12
GW61 12x16
GW61 16x16
GW61 20x20
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
A-Dia.
Inches
1.62
1.88
1.88
2.12
2.12
B
Drop
2.41
2.70
2.75
2.90
3.24
Part
No.
GW62 12x12
GW62 12x16
GW62 16x16
GW62 16x20
GW62 20x20
Split Flange Kits
(Code 62)
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
A
2.00
2.25
2.63
3.12
3.81
Hose
I.D.
3/4”
1”
1-1/4”
Flange
Size
3/4”
1”
1-1/4”
B
.94
1.09
1.25
1.44
1.75
C
13/32
15/32
17/32
21/32
25/32
A-Dia.
Inches
1.62
1.88
2.12
Complete
Kit No.
SFK62-12
SFK62-16
SFK62-20
SFK62-24
SFK62-32
O-Ring
No.
12252
16252
20252
24252
32252
Part
No.
GW80 12x12
GW80 16x16
GW80 20x20
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Hose
I.D.
3/4”
1”
1-1/4”
Flange
Size
3/4”
1”
1-1/4”
A-Dia.
Inches
1.62
1.88
2.12
B
Drop
1.25
1.40
1.50
Part
No.
GW81 12x12
GW81 16x16
GW81 20x20
Hose
I.D.
3/4”
1”
1-1/4”
Flange
Size
3/4”
1”
1-1/4”
A-Dia.
Inches
1.62
1.88
2.12
B
Drop
2.50
3.00
3.38
Part
No.
GW82 12x12
GW82 16x16
GW82 20x20
Split Flange Kits
(Extra Heavy)
Flange
Size
3/4”
1”
1-1/4”
A
2.00
2.25
2.63
B
.94
1.09
1.25
C
13/32
15/32
17/32
Complete
Kit No.
SFKHD-12
SFKHD-16
SFKHD-20
GWSeries No Skive
100R12 Crimp Chart
Hose
Hose
Type
ID
1/2”
3/4”
100R12
1”
(SP580, RC12B, & DHEXR12)
1-1/4”
1-1/2”
2”
3/4”
1”
100R2AT (57MB-2 & 56MB-2)
1-1/4”
2SN (2SN)
1-1/2”
2”
Dura-Hyd R17 (DH17)
1”
100R4 (104MB)
1-1/2”
100R4 (104MB)
2”
B-14
D-Ring
No.
D12
D16
D20
Crimp
OD
1.150
1.406
1.705
2.035
2.285
2.895
1.406
1.705
2.035
2.270
2.890
1.655
2.285
2.895
Part
No.
4H08-EG41
4H12-EG42
4H12-EG46
4H16-EG46
4H16-EG50
4H20-EG50
4H24-EG54
4H32-EG62
Flange
Size
1/2”
3/4”
1”
1-1/4”
1-1/4”
1-1/2”
2”
A-Dia.
Inches
1.19
1.50
1.75
2.00
2.00
2.38
2.81
B
Drop
1.62
2.12
2.38
2.38
2.62
3.12
4.64
Part
No.
4H08-EG71
4H12-EG72
4H16-EG76
4H16-EG80
4H20-EG80
4H24-EG84
4H32-EG92
Thread Size
1-3/16x12
1-7/16x12
1-11/16x12
Tube
O.D.
1”
1-1/4”
Thread
Size
1-7/16x12
1-11/16x12
Nut
Hex
1-5/8”
1-7/8”
Part
No.
4H16-ES76
4H20-ES80
5.
6.
7.
8.
Tube O.D.
3/4”
1”
1-1/4”
SKIVING METHOD.
Set skive tool cutting heads for proper skive length
and thickness of hose cover (thickness may vary by
manufacturer).
Clamp hose in vise taking care not to damage hose.
Lubricate hose I.D. and skive tool mandrel.
Align mandrel with hose I.D. and apply pressure to
start mandrel into hose.
Rotate skiving tool clockwise as cutting head
contacts hose. The cutting head will remove the
hose cover and maintain proper skive length when
bottomed against hose.
Slowly pull tool from hose.
Carefully wire brush skived area to remove any
remaining cover.
Clean rubber remnants from hose I.D.
Hose Type Hose I.D.
100R12
100R12
100R12
100R12
100R12
100R12
100R2AT
100R2AT
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
1-1/2”
2”
Skive Length
1-3/8”
1-11/16”
1-15/16”
2-1/8”
2-1/4”
2-9/16”
2-1/4”
2-9/16”
B-15
Crimp O.D.
.950
1.255
1.550
1.860
2.120
2.690
2.120
2.690
K
Skive tools available on Page H2
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part No.
4629x12
4629x16
4629x20
Thread Identification
Hose
I.D.
1”
1-1/4”
O-Ring
No.
8252
12252
16252
20252
24252
32252
1-3/8” 4H12-EA32
1-5/8” 4H16-EA36
1-7/8” 4H20-EA40
J
Part
No.
4H08-EG08
4H12-EG16
4H16-EG16
4H20-EG20
4H24-EG24
4H32-EG32
Complete
Kit No.
SFK-8
SFK-12
SFK-16
SFK-20
SFK-24
SFK-32
Part
No.
Cross Reference
A-Dia.
Inches
1.19
1.75
1.75
2.00
2.38
2.81
C
11/32
13/32
13/32
15/32
17/32
17/32
A
Nut
Drop Hex
H
Flange
Size
1/2”
1”
1”
1-1/4”
1-1/2”
2”
B
.69
.88
1.03
1.19
1.41
1.69
Thread
Size
Fabrication Equipment
Hose
I.D.
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
A
1.50
1.88
2.06
2.31
2.75
3.06
1-3/8” 4H12-EL72
1-5/8” 4H16-EL76
1-7/8” 4H20-EL80
“O” Ring
For ORF Seal
Couplings
2.
3.
4.
Flange
Size
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
Tube
O.D.
3/4”
3/4”
1-3/16x12 1.88
1”
1”
1-7/16x12 2.33
1-1/4” 1-1/4” 1-11/16x12 2.51
1.
Part
No.
1”
1”
1-5/16x12 2.62 1-1/2” 4H16-E676
1-1/4” 1-1/4” 1-5/8x12 3.31 2”
4H20-E677
3/4”
1-3/16x12 .84
1”
1-7/16x12 .95
1-1/4” 1-11/16x12 1.07
G
A Nut
Drop Hex
3/4”
1”
1-1/4”
Part
No.
Adapters
Thread
Size
A
Nut
Drop Hex
F
Hose
I.D.
1/2”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
Thread
Size
Reusables, Pushon, Acces.
Tube
O.D.
Tube
O.D.
Hose
I.D.
Split Flange Kits
(Code 61)
Hose
I.D.
Hose
I.D.
E
Part
No.
4H12-E512
4H16-E516
4H20-E520
B
Drop
.78
1.00
1.00
1.12
1.12
1.15
1.41
2.08
Refrigerant
Hex
Size
1-1/8”
1-1/2”
1-11/16”
Part
No.
4H08-E608
4H08-E610
4H12-E612
4H12-E616
4H16-E616
4H20-E620
4H24-E624
4H32-E632
A-Dia.
Inches
1.19
1.50
1.75
1.75
2.00
2.00
2.38
2.81
D
Thread
Size
1-1/16x12
1-5/16x12
1-5/8x12
Nut
Hex
7/8”
1”
1-1/4”
1-1/2”
1-1/2”
2”
2-1/4”
2-7/8”
Flange
Size
1/2”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
Thermoplastic
Tube
O.D.
3/4”
1”
1-1/4”
Hex
Size
1”
1”
1-1/8”
1-1/4”
1-1/2”
1-11/16”
2-1/8”
2-3/4”
Hose
I.D.
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
C
Hose
I.D.
3/4”
1”
1-1/4”
Thread
Size
3/4x16
7/8x14
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
1-7/8x12
2-1/2x12
Part
No.
4H08-E108
4H12-E112
4H16-E116
4H20-E120
4H24-E124
4H32-E132
Grip Crimp
Tube
O.D.
1/2”
5/8”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
Hex
Size
1”
1-1/4”
1-1/2”
1-11/16”
2-1/8”
2-3/4”
B
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1-1/4”
1-1/2”
2”
Thread
Size
1/2-14
3/4-14
1-11-1/2
1-1/4-11 1/2
1 1/2-11 1/2
2-11 1/2
Vari-Crimp
Pipe
Size
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
A
Hose
I.D.
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
Bulk Hose
Hydraulic Hose ends for 100R12 Four Spiral
(SP580), 1-1/2” & 2” 100R2 thin cover (57MB-2).
Skive required. The Vari-Crimp 4 Spiral Coupling
is compatible with virtually all spiral crimp
machines on the market. Check crimp O.D.
carefully.
Yellow Dichromate finish.
Skive Required!
Skive Type Hose Ends for 100R13 Four and Six Spiral
Hose (RC13 & DHEXR13) 3/4” thru 2”.
The SX Series Spiral Coupling is compatible with some fixed
and virtually all adjustable spiral crimp machines on the
market. Check crimp O.D. carefully.
Cross reference page J8.
Trivalent Zinc Plating
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Pipe
Size
3/4”
1”
1-1/4”
1-1/2”
2”
Thread
Size
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
2-11 1/2
Hex
Size
1-1/8”
1-3/8”
1-11/16”
2-”
2-1/2”
Hose
I.D.
3/4”
3/4”
1”
1-1/4”
1-1/2”
2”
Tube
Size
3/4”
1”
1”
1-1/4”
1-1/2”
2”
Thread
Size
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
1-7/8x12
2-1/2x12
Hex
Size
1-1/8”
1-3/8”
1-3/8”
1-11/16”
2”
2-1/2”
Hose
I.D.
3/4”
1”
Tube
Size
3/4”
1”
Thread
Size
1-1/16x12
1-5/16x12
A
Drop
1.50
1.75
Hose
I.D.
3/4”
1”
1-1/4”
Tube
Size
3/4”
1”
1-1/4”
Thread
Size
1-1/16x12
1-5/16x12
1-5/8x12
A
Drop
2.38
2.75
3.40
Part
No.
SX01 12x12
SX01 16x16
SX01 20x20
SX01 24x24
SX01 32x32
Nut
Hex
1-1/4”
1-1/2”
1-1/2”
2”
2-1/4”
2-7/8”
Part
No.
SX09 12x12
SX09 12x16
SX09 16x16
SX09 20x20
SX09 24x24
SX09 32x32
Nut
Part
Hex
No.
1-1/4” SX25 12x12
1-1/2” SX25 16x16
Nut
Hex
1-1/4”
1-1/2”
2”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Hose
I.D.
3/4”
1”
1-1/4”
Tube
Size
3/4”
1”
1-1/4”
Thread
Size
1-3/16x12
1-7/16x12
1-11/16x12
Nut
Hex
1-3/8”
1-5/8”
1-7/8”
Part
No.
SX30 12x12
SX30 16x16
SX30 20x20
Hose
I.D.
3/4”
1”
1-1/4”
Tube
Size
3/4”
1”
1-1/4”
Thread
Size
1-3/16x12
1-7/16x12
1-11/16x12
A
Drop
1.90
2.50
2.80
Nut
Part
Hex
No.
1-3/8” SX32 12x12
1-5/8” SX32 16x16
1-7/8” SX32 20x20
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
A-Dia.
Inches
1.50
1.75
2.00
2.38
2.81
Part
No.
SX47 12x12
SX47 16x16
SX47 20x20
SX47 24x24
SX47 32x32
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
A-Dia.
Inches
1.50
1.75
2.00
2.38
2.81
B
Drop
1.25
1.30
1.50
1.75
2.25
Part
No.
SX26 12x12
SX26 16x16
SX26 20x20
B-16
Part
No.
SX50 12x12
SX50 16x16
SX50 20x20
SX50 24x24
SX50 32x32
A
B
Vari-Crimp
The SX Series Spiral Coupling is compatible with some fixed
and virtually all adjustable spiral crimp machines on the
market. Check crimp O.D. carefully.
Cross reference page J8.
Trivalent Zinc Plating
Bulk Hose
Skive Type Hose Ends for 100R13 Four and Six Spiral
Hose (RC13 & DHEXR13) 3/4” thru 2”.
C
Grip Crimp
A-Dia.
Inches
1.50
1.75
2.00
2.38
2.81
B
Drop
2.38
2.75
2.88
4.00
5.40
Part
No.
SX53 12x12
SX53 16x16
SX53 20x20
SX53 24x24
SX53 32x32
Split Flange Kits
(Code 61)
A-Dia.
Inches
1.62
1.88
1.88
2.12
2.12
2.50
3.12
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
A-Dia.
Inches
1.62
1.88
2.12
2.50
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
A-Dia.
Inches
1.62
1.88
2.12
2.50
B
.94
1.09
1.25
1.44
1.75
C
13/32
15/32
17/32
21/32
25/32
Complete
Kit No.
SFK62-12
SFK62-16
SFK62-20
SFK62-24
SFK62-32
O-Ring
No.
12252
16252
20252
24252
32252
Part
No.
SX80 12x12
SX80 16x16
SX80 20x20
SX80 24x24
H
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
A
2.00
2.25
2.63
3.12
3.81
Fabrication Equipment
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
Part
No.
SX60 12x12
SX60 12x16
SX60 16x16
SX60 16x20
SX60 20x20
SX60 24x24
SX60 32x32
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
G
A-Dia.
Inches
1.62
1.88
1.88
2.12
2.12
2.50
3.12
O-Ring
No.
12252
16252
20252
24252
32252
Split Flange Kits
(Code 62)
Adapters
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
Complete
Kit No.
SFK-12
SFK-16
SFK-20
SFK-24
SFK-32
Part
No.
SX62 12x12
SX62 12x16
SX62 16x16
SX62 16x20
SX62 20x20
SX62 24x24
SX62 32x32
F
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
C
13/32
13/32
15/32
17/32
17/32
B
Drop
2.50
2.50
2.75
2.88
3.25
3.75
5.38
Reusables, Pushon, Acces.
B
.88
1.03
1.19
1.41
1.69
A-Dia.
Inches
1.62
1.88
1.88
2.12
2.12
2.50
3.12
E
A
1.88
2.06
2.31
2.75
3.06
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
Refrigerant
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
D
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
Thermoplastic
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
B
Drop
1.25
1.40
1.50
1.75
Part
No.
SX81 12x12
SX81 16x16
SX81 20x20
SX81 24x24
J
K
Thread Identification
Part
No.
SX61 12x12
SX61 12x16
SX61 16x16
SX61 16x20
SX61 20x20
SX61 24x24
SX61 32x32
Cross Reference
B
Drop
1.25
1.38
1.38
1.38
1.50
1.70
2.25
Couplamatic Systems Inc. Hydraulic Catalog 4010.
B-17
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
A-Dia.
Inches
1.62
1.88
2.12
2.50
B
Drop
2.50
3.00
3.38
4.00
Part
No.
SX82 12x12
SX82 16x16
SX82 20x20
SX82 24x24
Split Flange Kits
(Extra Heavy)
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
Hose
I.D.
3/4”
1”
Hose
I.D.
3/4”
1”
Hose
Type
100R13
100R13
100R13
100R13
100R13
A
2.00
2.25
2.63
3.12
3.81
BSPP
Size
3/4”
1”
Tube
Size
25mm
30mm
B
.94
1.09
1.25
1.44
1.75
C
13/32
15/32
17/32
21/32
25/32
Thread
Size
G-3/4-14
G-1-11
Thread
Size
M36x2.0
M42x2.0
Complete
Kit No.
SFKHD-12
SFKHD-16
SFKHD-20
SFKHD-24
SFKHD-32
Hex
Size
1-1/8”
1-3/8”
Hex
Size
1-3/8”
1-11/16”
Nut
Hex
1-1/4”
1-1/2”
Nut
Hex
1-7/8”
2”
SX Series Skive
100R13 Crimp Chart
Hose
Crimp
ID
OD
3/4”
1.250
1”
1.560
1-1/4”
2.025
1-1/2”
2.365
2”
2.975
D-Ring
No.
D12
D16
D20
D24
D32
Part
No.
SX10 12x12
SX10 16x16
Part
No.
SX38-12x25
SX38-16x30
Skive
Length
1-13/16”
2-1/8”
2-7/8”
3-1/8”
3-3/8”
Hose
I.D.
3/16”
3/16”
1/4”
5/16”
5/16”
13/32”
13/32”
1/2”
5/8”
7/8”
1-1/8”
1-3/8”
1-13/16”
Hose
I.D.
3/16”
1/4”
5/16”
13/32”
1/2”
5/8”
7/8”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
B-18
Thread
Size
1/8-27
1/4-18
1/4-18
1/4-18
3/8-18
3/8-18
1/2-14
1/2-14
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
2 11-1/2
Thread
Size
7/16x20
1/2x20
9/16x18
3/4x16
7/8x14
1-1/16x12
1-5/16x12
Hose
I.D.
3/16”
1/4”
5/16”
5/16”
13/32”
1/2”
1/2”
5/8”
7/8”
1-1/8”
1-3/8”
1-13/16”
Skive tools available on Page H2
Pipe
Size
1/8”
1/4”
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
Tube
Size
1/4”
5/16”
3/8”
1/2”
1/2”
1/2”
5/8”
3/4”
1”
1-1/4”
1-1/2”
2”
Tube
O.D.
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
1”
Thread
Size
7/16x20
1/2x20
9/16x18
3/4x16
3/4x16
3/4x16
7/8x14
1-1/16x12
1-5/16x12
1-5/8x12
1-7/8x12
2-1/2x12
Hex
Size
9/16”
9/16”
9/16”
11/16”
11/16”
3/4”
7/8”
7/8”
1-1/16”
1-3/8”
1-11/16”
2”
2-1/2”
Hex
Size
9/16”
9/16”
5/8”
7/8”
15/16”
1-1/8”
1-3/8”
Hex
Size
9/16”
9/16”
11/16”
3/4”
3/4”
7/8”
7/8”
1”
1-1/4”
1-5/8”
2”
2-1/2”
Part
No.
R501 4X2
R501 4X4
R501 5X4
R501 6X4
R501 6X6
R501 8X6
R501 8X8
R501 10X8
R501 12X12
R501 16X16
R501 20X20
R501 24x24
R501 32x32
Part
No.
R508 4X4
R508 5X5
R508 6X6
R508 8X8
R508 10X10
R508 12X12
R508 16X16
Nut
Hex
9/16”
5/8”
11/16”
7/8”
7/8”
7/8”
1”
1-1/4”
1-1/2”
2”
2-1/4”
2-7/8”
Part
No.
R509 4X4
R509 5X5
R509 6X6
R509 6X8
R509 8X8
R509 10X8
R509 10X10
R509 12X12
R509 16X16
R509 20X20
R509 24x24
R509 32x32
B
Thread
Size
7/16x20
1/2x20
9/16x18
3/4x16
7/8x14
1-1/16x12
A-Drop
Inches
0.47
0.53
0.59
0.71
0.68
1.12
Hose
I.D.
3/16”
1/4”
5/16”
13/32”
Thread
Size
7/16x24
1/2x20
5/8x18
3/4x18
Tube
O.D.
1/4”
5/16”
3/8”
1/2”
A-Drop
Inches
1.23
1.38
1.63
2.20
Nut
Hex
7/16”
1/2”
5/8”
3/4”
Part
No.
R520 4x4
R520 5x5
R520 6x6
R520 8x8
Hose
I.D.
3/16”
5/16”
13/32”
5/8”
Thread
Size
9/16x18
11/16x16
13/16x16
1-3/16x12
Tube
O.D.
1/4”
3/8”
1/2”
3/4”
Nut
Hex
11/16”
13/16”
15/16”
1-3/8”
Hose
I.D.
3/16”
5/16”
13/32”
Thread
Size
9/16x18
11/16x16
13/16x16
Tube
O.D.
1/4”
3/8”
1/2”
A-Drop
Inches
.41
.43
.60
Nut
Hex
11/16”
13/16”
15/16”
Part
No.
R531 4X4
R531 6X6
R531 8X8
Hose
I.D.
3/16”
5/16”
13/32”
5/8”
Thread
Size
9/16x18
11/16x16
13/16x16
1-3/16x12
Tube
O.D.
1/4”
3/8”
1/2”
3/4”
A-Drop
Inches
0.78
0.90
1.15
1.88
Nut
Hex
11/16”
13/16”
15/16”
1-3/8”
Part
No.
R532 4X4
R532 6X6
R532 8X8
R532 12X12
D
Tube
Size
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
Part
No.
R507 6X6
R507 12X12
Thermoplastic
Hose
I.D.
3/16”
1/4”
5/16”
13/32”
1/2”
5/8”
Nut
Hex
3/4”
1-1/4”
C
Hex
Size
11/16”
1”
Grip Crimp
Thread
Size
5/8x18
1-1/16x14
Vari-Crimp
Tube
Size
3/8”
3/4”
A
Trivalent Zinc Plating
Hose
I.D.
5/16”
5/8”
Bulk Hose
Hydraulic Hose ends for 100R5 textile cover hose(58 MBA &
HTR5 Hi-Temp R5) The R5 Series Couplings are compatible
with virtually all Crimp Machines and can be crimped with a
standard straight crimp or bubble crimp.
Cross reference page J10.
Minimum Order Quantities:
10 pcs for 3/16”-5/8” and
5 pcs for 7/8” and 1-1/8”
Thread
Size
5/8x18
A-Drop
Inches
0.910
Nut
Hex
3/4”
Part
No.
R518 4x4
R518 5x5
R518 6x6
R518 8x8
*JIC Seat & Thread Only
Couplamatic Systems Inc. Hydraulic Catalog 4010.
B-19
Straight
Crimp O.D.
0.565
0.620
0.710
0.795
0.910
1.100
1.265
1.535
1.750
2.200
Bubble
Crimp O.D.
0.525
0.585
0.680
0.765
0.910
1.080
1.275
1.520
1.730
K
Nut
Hex
7/16”
1/2”
5/8”
3/4”
I.D.
3/16”
1/4”
5/16”
13/32”
1/2”
5/8”
7/8”
1-1/8”
1-3/8”
1-13/16”
Thread Identification
Tube
O.D.
1/4”
5/16”
3/8”
1/2”
Dash Size
-4
-5
-6
-8
-10
-12
-16
-20
-24
-32
J
Thread
Size
7/16x24
1/2x20
5/8x18
3/4x18
R5 SERIES CRIMP DIAMETER CHART
Cross Reference
Hose
I.D.
3/16”
1/4”
5/16”
13/32”
Part
No.
R523 6X6
H
Tube
Size
3/8”
Fabrication Equipment
Hose
I.D.
5/16”
Part
No.
R526 4X4
R526 5X5
R526 6X6*
R526 8X8
R526 10X10
R526 12X12*
G
Nut
Hex
9/16”
5/8”
11/16”
7/8”
1”
1-1/4”
Adapters
A-Drop
Inches
0.81
0.83
0.91
1.15
1.23
1.88
F
Thread
Size
7/16x20
1/2x20
9/16x18
3/4x16
7/8x14
1-1/16x12
Reusables, Pushon, Acces.
Tube
Size
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
Part
No.
R530 4X4
R530 6X6
R530 8X8
R530 12X12
E
Hose
I.D.
3/16”
1/4”
5/16”
13/32”
1/2”
5/8”
Part
No.
R525 4X4
R525 5X5
R525 6X6*
R525 8X8
R525 10X10
R525 12X12*
Refrigerant
Nut
Hex
9/16”
5/8”
11/16”
7/8”
1”
1-1/4”
Hydraulic Hose ends for 100R14 PTFE Hose (TR14), 100R7
Reduced OD Hose (1/4” - 3/8” RD7, RD7NC, RD7TL, &
RD7TLNC), and Standard 100R7 (1/2” - 1” H7, H7NC,H7TL, &
H7TLNC) The T Series Couplings are compatible with virtually all
Crimp Machines and can be crimped with a standard straight crimp
or bubble crimp. Cross reference page J10.
Minimum Order Quantities:
10 pcs for 3/16” - 1/2” and
5 pcs for 3/4” and 1”
Trivalent Zinc Plating
Hose
I.D.
3/16”
3/16”
1/4”
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Hose
I.D.
1/4”
5/16”
3/8”
1/2”
Hose
I.D.
1/4”
1/4”
5/16”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Pipe
Size
1/8”
1/4”
1/8”
1/4”
3/8”
1/4”
3/8”
1/4”
3/8”
1/2”
3/8”
1/2”
3/4”
1”
Pipe
Size
1/4”
1/4”
3/8”
1/2”
Thread
Size
1/8-27
1/4-18
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
1-11 1/2
Thread
Size
1/4-18
1/4-18
3/8-18
1/2-14
Thread
Size
7/16x20
9/16x18
1/2x20
9/16x18
3/4x16
3/4x16
7/8x14
1-1/16x12
1-5/16x12
Hex
Size
1/2”
9/16”
1/2”
9/16”
11/16”
9/16”
11/16”
9/16”
11/16”
7/8”
3/4”
7/8”
1-1/16”
1-3/8”
Hex
Size
9/16”
11/16”
11/16”
3/4”
Tube
O.D.
1/4”
3/8”
5/16”
3/8”
1/2”
1/2”
5/8”
3/4”
1”
Part
No.
T01 3X2
T01 3X4
T01 4X2
T01 4X4
T01 4X6
T01 5X4
T01 5X6
T01 6X4
T01 6X6
T01 6X8
T01 8X6
T01 8X8
T01 12X12
T01 16X16
Nut
Hex
5/8”
3/4”
3/4”
7/8”
Hex
Size
1/2”
5/8”
9/16”
5/8”
13/16”
13/16”
15/16”
1-1/8”
1-3/8”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part
No.
T04 4X4
T04 5X4
T04 6X6
T04 8X8
Part
No.
T08 4X4
T08 4X6
T08 5X5
T08 6X6
T08 6X8
T08 8X8
T08 8X10
T08 12X12
T08 16X16
Hose
I.D.
3/16”
1/4”
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Tube
Size
1/4”
1/4”
5/16”
3/8”
5/16”
3/8”
3/8”
1/2”
1/2”
5/8”
3/4”
1”
Thread
Size
7/16x20
7/16x20
1/2x20
9/16x18
1/2x20
9/16x18
9/16x18
3/4x16
3/4x16
7/8x14
1-1/16x12
1-5/16x12
Hex
Size
1/2”
1/2”
1/2”
9/16”
1/2”
9/16”
9/16”
3/4”
3/4”
7/8”
1”
1-1/4”
Nut
Hex
9/16”
9/16”
5/8”
11/16”
5/8”
11/16”
11/16”
7/8”
7/8”
1”
1-1/4”
1-1/2”
Part
No.
T09 3X4
T09 4X4
T09 4X5
T09 4X6
T09 5X5
T09 5X6
T09 6X6
T09 6X8
T09 8X8
T09 8X10
T09 12X12
T09 16X16
Hose
I.D.
5/16”
3/8”
Tube
Size
3/8”
3/8”
Thread
Size
5/8x18
5/8x18
Hex
Size
9/16”
9/16”
Nut
Hex
3/4”
3/4”
Part
No.
T07 5X6
T07 6X6
Hose
I.D.
1/4”
5/16”
3/8”
1/2”
1/2”
3/4”
1”
Tube
Size
1/4”
3/8”
3/8”
1/2”
5/8”
3/4”
1”
Thread
Size
7/16x20
9/16x18
9/16x18
3/4x16
7/8x14
1-1/16x12
1-5/16x12
A-Drop
Inches
0.47
0.59
0.59
0.71
0.84
1.12
1.15
Nut
Hex
9/16”
11/16”
11/16”
7/8”
1”
1-1/4”
1-1/2”
Part
No.
T25 4X4
T25 5X6*
T25 6X6*
T25 8X8
T25 8X10
T25 12X12*
T25 16X16*
B-20
*JIC Seat & Thread Only
Tube
O.D.
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
A-Drop
Inches
0.78
0.90
0.90
0.90
1.15
1.15
1.88
2.20
Nut
Hex
11/16”
13/16”
13/16”
13/16”
15/16”
15/16”
1-3/8”
1-5/8”
Part
No.
T32 4X4
T32 4X6
T32 5X6
T32 6X6
T32 6X8
T32 8X8
T32 12X12
T32 16X16
Tube
O.D.
1/4”
3/8”
1/2”
A-Drop
Inches
1.80
2.13
2.51
Nut
Hex
11/16”
13/16”
15/16”
Part
No.
T33 4X4
T33 6X6
T33 8X8
Hex
Size
9/16”
3/4”
13/16”
Nut
Hex
3/4”
7/8”
1”
Part
No.
T10 4X4
T10 6X6
T10 8X8
A-Drop
Inches
0.91
0.91
Nut
Hex
3/4”
3/4”
Hose
I.D.
1/4”
3/8”
1/2”
Thread
Size
9/16x18
11/16x16
13/16x16
Part
No.
T30 4X4
T30 4X6
T30 5X6
T30 6X6
T30 6X8
T30 8X8
T30 8X10
T30 12X12
T30 16X16
Hose
I.D.
1/4”
3/8”
1/2”
BSPP
Size
1/4”
3/8”
1/2”
H
Part
No.
T23 5X6
T23 6X6
Fabrication Equipment
Thread
Size
9/16x18
11/16x16
11/16x16
11/16x16
13/16x16
13/16x16
1-3/16x12
1-7/16x12
G
A-Drop
Inches
1.80
2.18
2.50
3.73
4.50
Hose
I.D.
1/4”
1/4”
Nut
Part
5/16”
Hex
No.
3/8”
9/16” T27 4X4
3/8”
11/16” T27 6X6* 1/2”
7/8”
T27 8X8
3/4”
1-1/4” T27 12X12* 1”
1-1/2” T27 16X16*
Adapters
Part
No.
T31 4X4
T31 5X6
T31 6X6
T31 8X8
T31 12X12
T31 16X16
F
Thread
Size
9/16x18
11/16x16
11/16x16
11/16x16
13/16x16
13/16x16
1x14
1-3/16x12
1-7/16x12
Nut
Hex
11/16”
13/16”
13/16”
15/16”
1-3/8”
1-5/8”
Reusables, Pushon, Acces.
Hose
I.D.
1/4”
1/4”
5/16”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
A-Drop
Inches
.41
.43
.43
.60
.83
1.15
E
Thread
Size
5/8x18
5/8x18
Tube
O.D.
1/4”
3/8”
3/8”
1/2”
3/4”
1”
Refrigerant
Tube
Size
3/8”
3/8”
Thread
Size
9/16x18
11/16x16
11/16x16
13/16x16
1-3/16x12
1-7/16x12
D
Hose
I.D.
5/16”
3/8”
Hose
I.D.
1/4”
5/16”
3/8”
1/2”
3/4”
1”
Thermoplastic
Thread
Size
7/16x20
9/16x18
3/4x16
1-1/16x12
1-5/16x12
Part
No.
T26 4X4
T26 4X5
T26 5X6*
T26 6X6*
T26 6X8
T26 8X8
T26 8X10
T26 12X12*
T26 16X16*
C
Tube
Size
1/4”
3/8”
1/2”
3/4”
1”
Nut
Hex
9/16”
5/8”
11/16”
11/16”
7/8”
7/8”
1”
1-1/4”
1-1/2”
Grip Crimp
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
1”
A-Drop
Inches
0.81
0.83
0.910
0.910
1.15
1.15
1.23
1.88
2.20
B
Thread
Size
7/16x20
1/2x20
9/16x18
9/16x18
3/4x16
3/4x16
7/8x14
1-1/16x12
1-5/16x12
Vari-Crimp
Tube
Size
1/4”
5/16”
3/8”
3/8”
1/2”
1/2”
5/8”
3/4”
1”
A
Hose
I.D.
1/4”
1/4”
5/16”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Bulk Hose
Hydraulic Hose ends for 100R14 PTFE Hose (TR14), 100R7
Reduced OD Hose (1/4” - 3/8” RD7, RD7NC, RD7TL, &
RD7TLNC), and Standard 100R7 (1/2” - 1” H7, H7NC,H7TL, &
H7TLNC) The T Series Couplings are compatible with virtually all
Crimp Machines and can be crimped with a standard straight crimp
or bubble crimp. Cross reference page J10.
Minimum Order Quantities:
10 pcs for 3/16” - 1/2” and
5 pcs for 3/4” and 1”
Trivalent Zinc Plating
*JIC Seat & Thread Only
K
B-21
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Thread
Size
G-1/4-19
G-3/8-19
G-1/2-14
J
Nut
Hex
11/16”
13/16”
13/16”
13/16”
15/16”
15/16”
1-1/8”
1-3/8”
1-5/8”
Cross Reference
Tube
O.D.
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
5/8”
3/4”
1”
Hydraulic Hose ends for 100R14 PTFE Hose (TR14), 100R7
Reduced OD Hose (1/4” - 3/8” RD7, RD7NC, RD7TL, &
RD7TLNC), and Standard 100R7 (1/2” - 1” H7, H7NC,H7TL, &
H7TLNC) The T Series Couplings are compatible with virtually all
Crimp Machines and can be crimped with a standard straight crimp
or bubble crimp. Cross reference page J10.
Minimum Order Quantities:
10 pcs for 3/16” - 1/2” and
5 pcs for 3/4” and 1”
Trivalent Zinc Plating
T SERIES CRIMP DIAMETER CHART
Hose
I.D.
1/4”
1/4”
5/16”
3/8”
Hose
I.D.
1/4”
3/8”
Thread
Size
7/16x24
1/2x20
1/2x20
5/8x18
Thread
Size
7/16x24
5/8x18
Tube
O.D.
1/4”
5/16”
5/16”
3/8”
Tube
O.D.
1/4”
3/8”
Nut
Hex
7/16”
1/2”
1/2”
5/8”
A-Drop
Inches
1.08
1.03
Nut
Hex
7/16”
5/8”
Part
No.
T18 4X4
T18 4X5
T18 5X5
T18 6X6
Part
No.
T19 4X4
T19 6X6
PTFE100R14 (TR14)
Dash Size
I.D.
-3
3/16”
-4
1/4”
-5
5/16”
-6
3/8”
-8
1/2”
-12
3/4”
-16
1”
Straight
Crimp O.D.
0.395
0.430
0.490
0.565
0.695
0.995
1.225
Bubble
Crimp O.D.
0.355
0.405
0.475
0.545
0.695
0.978
1.225
Reduced OD 100R7
(RD7, RD7NC, & TL)
Dash Size
I.D.
-4
1/4”
-5
5/16”
-6
3/8”
Straight
Crimp O.D.
0.485
0.585
0.645
Bubble
Crimp O.D.
0.455
0.555
0.615
Standard OD 100R7
(H7, H7NC, H7TL, & H7TLNC)
Straight
Dash Size
I.D.
Crimp O.D.
Bubble
Crimp O.D.
-8
-12
-16
Hose
I.D.
1/4”
3/8”
Thread
Size
7/16x24
5/8x18
Tube
O.D.
1/4”
3/8”
A-Drop
Inches
1.23
1.63
Nut
Hex
7/16”
5/8”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part
No.
T20 4X4
T20 6X6
B-22
1/2”
3/4”
1”
.840
1.125
1.385
.765
1.035
1.295
B
C
Grip Crimp
F
G
Adapters
Thread
Size
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
1-11 1/2
Reusables, Pushon, Acces.
Pipe
Size
1/8”
1/4”
3/8”
1/4”
3/8”
1/2”
3/8”
1/2”
3/4”
1”
Part
No.
GC01-4x2
GC01-4x4
GC01-4x6
GC01-4x8
GC01-6x4
GC01-6x6
GC01-6x8
GC01-8x4
GC01-8x6
GC01-8x8
GC01-8x12
GC01-10x8
GC01-10x12
GC01-12x8
GC01-12x12
GC01-12x16
GC01-16x12
GC01-16x16
GC01-20x20
GC01-24x24
GC01-32x32
E
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Hex
Size
9/16”
9/16”
11/16”
7/8”
3/4”
3/4”
7/8”
7/8”
7/8”
7/8”
1-1/8”
15/16”
1-1/8”
1-1/8”
1-1/8”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
2”
2-1/2”
Refrigerant
Thread
Size
1/8-27
1/4-18
3/8-18
1/2-14
1/4-18
3/8-18
1/2-14
1/4-18
3/8-18
1/2-14
3/4-14
1/2-14
3/4-14
1/2-14
3/4-14
1-11 1/2
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
2-11 1/2
D
Pipe
Size
1/8”
1/4”
3/8”
1/2”
1/4”
3/8”
1/2”
1/4”
3/8”
1/2”
3/4”
1/2”
3/4”
1/2”
3/4”
1”
3/4”
1”
1-1/4”
1-1/2”
2”
Thermoplastic
Hose
I.D.
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
H
J
Cross Reference
K
Thread Identification
C-1
Part
No.
GC04-4x2
GC04-4x4
GC04-4x6
GC04-6x4
GC04-6x6
GC04-6x8
GC04-8x6
GC04-8x8
GC04-12x12
GC04-16x16
Fabrication Equipment
Nut
Hex
5/8”
5/8”
3/4”
3/4”
3/4”
7/8”
3/4”
7/8”
1-1/4”
1-3/8”
* Note: Swivel for installation purposes only.
Leakage may occur at low pressure.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Vari-Crimp
Grip-Crimp Series Reference Chart
Coupling Description
Page No.
NPTF Solid Male
C-1
NPTF Solid Female
C-2
Solid Female Grease Tap
C-2
NPTF Swivel Male
C-1
NPSM Swivel Female
C-2
SAE 45° Solid Male
C-4
SAE 45° Swivel Female
C-4
JIC 37° Solid Male
C-2
JIC 37° Swivel Female
C-3
BSPP Swivel Female
C-7
ORB Solid Male
C-4
ORB Swivel Male
C-4
Hose Splicer
C-5
90° NPTF Swivel Male
C-2
ORB 90° Swivel Male
C-5
NPTF Swivel Female
C-2
JIC 37° 90° Swivel Female
C-3
Male Straight Inverted Flare
C-6
45° Bend Male Inverted Flare
C-6
90° Bend Male Inverted Flare
C-7
Standpipe Coupling
C-5
45° Bend SAE Swivel Female
C-4
90° Bend SAE Swivel Female
C-4
90° JIC/SAE Dual Seat Swivel Female (Med Drop)
C-4
45° JIC/SAE Dual Seat Swivel Female
C-3
90° JIC/SAE Dual Seat Swivel Female
C-3
90° JIC/SAE Dual Seat Swivel Female (Long Drop)
C-4
Tube Repair
C-5
ORF Solid Male
C-5
ORF Straight Tube Swivel Female
C-5
45° ORF Swivel Female
C-6
90° ORF Swivel Female (Short Drop)
C-6
90° ORF Swivel Female (Long Drop)
C-6
90° ORF Swivel Female (Med Drop)
C-6
BSPT Solid Male
C-7
BSPP Solid Male
C-7
DIN Universal Seat Female Swivel (Light)
C-8
DIN 24 degree Seat Female Swivel (Heavy) C-9
Female Swivel 30 degree flare (Komatsu)
C-8
JIS 30 degree flare Swivel Female
C-8
DIN Universal Seat Female 45 degree Swivel (Light)
C-8
DIN 24 degree seat Female 45 Degree Swivel (Heavy)
C-9
BSPP Swivel Female 45 degree tube
C-8
DIN Universal Seat Female 90 degree Swivel (Light)
C-8
DIN 24 degree Seat Female 90 degree Swivel (Heavy)
C-9
BSPP Swivel Female 90 degree tube
C-8
Split Flange Straight
C-7
Split Flange 45 degree tube
C-7
Split Flange 90 degree tube
C-7
Male DIN Solid 24° Seat (Light)
C-8
Male DIN Solid 24° Seat (Heavy)
C-9
A
Series
GC01
GC02
GC03
GC04
GC05
GC06
GC07
GC08
GC09
GC10
GC11
GC12
GC13
GC14
GC15
GC16
GC17
GC18
GC19
GC20
GC21
GC22
GC23
GC24
GC25
GC26
GC27
GC28
GC29
GC30
GC31
GC32
GC33
GC34
GC35
GC36
GC37
GC38
GC39
GC40
GC41
GC42
GC43
GC44
GC45
GC46
GC47
GC50
GC53
GC66
GC67
Bulk Hose
Bite to the Wire Hydraulic Hose ends for 100R1/1SN thin
cover (57MB-1, 56MB-1), 100R2 thin cover (57MB-2,
56MB-2), 2SN (2SN), HY-PLUS I (HPI), & III (HPIII),
100R16/2SC (R16), 100R17 (R17), Dura-Hyd R16, R17, EX
(DH16, DH17, DHEX16), Ultra R16, 100R3, and 100R4
hose. Grip-Crimp couplings can be crimped in virtually all
adjustable crimp machines. Some non-adjustable crimp
equipment can produce crimp dimensions within CSI’s
recommended crimp specification. (see pg C9)
Cross reference pages J11-J12
Trivalent Zinc Plating
Bite to the Wire Hydraulic Hose ends for 100R1/1SN thin
cover (57MB-1, 56MB-1), 100R2 thin cover (57MB-2,
56MB-2), 2SN (2SN), HY-PLUS I (HPI), & III (HPIII),
100R16/2SC (R16), 100R17 (R17), Dura-Hyd R16, R17, EX
(DH16, DH17, DHEX16), Ultra R16, 100R3, and 100R4
hose. Grip-Crimp couplings can be crimped in virtually all
adjustable crimp machines. Some non-adjustable crimp
equipment can produce crimp dimensions within CSI’s
recommended crimp specification. (see pg C9)
Cross reference pages J11-J12
Trivalent Zinc Plating
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
3/4”
1”
Pipe
Size
1/4”
3/8”
1/2”
1/2”
3/4”
1”
Thread
Size
1/4-18
3/8-18
1/2-14
1/2-14
3/4-14
1-11 1/2
Nut
Hex
5/8”
3/4”
7/8”
7/8”
1-1/4”
1-3/8”
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
3/4”
Pipe
Size
1/8”
1/4”
1/4”
3/8”
1/2”
1/2”
3/4”
Thread
Size
1/8-27
1/4-18
1/4-18
3/8-18
1/2-14
1/2-14
3/4-14
Hex
Size
5/8”
3/4”
3/4”
7/8”
1”
1”
1-1/4”
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
Pipe
Size
1/4”
3/8”
1/2”
3/4”
Thread
Size
1/4-18
3/8-18
1/2-14
3/4-14
Hex
Size
5/8”
11/16”
7/8”
1-1/8”
Part
No.
GC14 4x4
GC14-6x6
GC14-6x8
GC14-8x8
GC14 12x12
GC14 16x16
Nut
Hex
3/4”
7/8”
1”
1-1/4”
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
3/4”
1”
1-1/4”
Pipe
Size
1/4”
3/8”
1/2”
1/2”
3/4”
1”
1-1/4”
Hose
I.D.
1/4”
3/8”
Thread
Size
1/2-27
1/2-27
Part
No.
GC02-4x2
GC02-4x4
GC02-6x4
GC02-6x6
GC02-6x8
GC02-8x8
Hose
GC02-12x12 I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
Part
1/2”
No.
5/8”
GC16-4x4
5/8”
GC16-6x6
5/8”
GC16-8x8
GC16-12x12 3/4”
3/4”
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
* Note: Swivel for installation purposes only.
Leakage may occur at low pressure.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-2
Thread
Size
1/4-18
3/8-18
1/2-14
1/2-14
3/4-14
1-11 1/2
1 1/4-11 1/2
Thread
Size
7/16x20
1/2x20
9/16x18
9/16x18
3/4x16
7/8x14
3/4x16
7/8x14
1-1/16x12
3/4x16
7/8x14
1-1/16x12
7/8x14
1-1/16x12
1-3/16x12
1-5/16x12
1-3/16x12
1-5/16x12
1-5/8x12
1-7/8x12
Hex
Size
9/16”
11/16”
3/4”
7/8”
1-1/8”
1-3/8”
1-11/16”
Tube
O.D.
1/4”
5/16”
3/8”
3/8”
1/2”
5/8”
1/2”
5/8”
3/4”
1/2”
5/8”
3/4”
5/8”
3/4”
7/8”
1”
7/8”
1”
1-1/4”
1-1/2”
Nut
Hex
11/16”
7/8”
1”
1”
1-1/4”
1-1/2”
1-7/8”
Part
No.
GC05-4x4
GC05-6x6
GC05-6x8
GC05-8x8
GC05-12x12
GC05-16x16
GC05-20x20
Hex
Size
3/4”
3/4”
Part
No.
GC03-4x8
GC03-6x8
Hex
Size
9/16”
9/16”
5/8”
11/16”
3/4”
7/8”
7/8”
7/8”
1-1/8”
15/16”
15/16”
1-1/8”
1-1/8”
1-1/8”
1-3/8”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
2”
Part
No.
GC08-4x4
GC08-4x5
GC08-4x6
GC08-6x6
GC08-6x8
GC08-6x10
GC08-8x8
GC08-8x10
GC08-8x12
GC08-10x8
GC08-10x10
GC08-10x12
GC08-12x10
GC08-12x12
GC08-12x14
GC08-12x16
GC08-16x14
GC08-16x16
GC08-20x20
GC08-24x24
A
Bulk Hose
B
Vari-Crimp
Bite to the Wire Hydraulic Hose ends for 100R1/1SN thin
cover (57MB-1, 56MB-1), 100R2 thin cover (57MB-2,
56MB-2), 2SN (2SN), HY-PLUS I (HPI), & III (HPIII),
100R16/2SC (R16), 100R17 (R17), Dura-Hyd R16, R17, EX
(DH16, DH17, DHEX16), Ultra R16, 100R3, and 100R4
hose. Grip-Crimp couplings can be crimped in virtually all
adjustable crimp machines. Some non-adjustable crimp
equipment can produce crimp dimensions within CSI’s
recommended crimp specification. (see pg C9)
Cross reference pages J11-J12
Trivalent Zinc Plating
C
Grip Crimp
Tube
O.D.
1/4”
5/16”
3/8”
1/4”
5/16”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
1”
1”
1-1/4”
A-Drop
Inches
0.47
0.53
0.59
0.47
0.53
0.59
0.71
0.71
0.84
0.68
0.78
1.12
1.15
1.15
1.69
Nut
Hex
9/16”
5/8”
11/16”
9/16”
5/8”
11/16”
7/8”
7/8”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
Part
No.
GC25-4x4
GC25-4x5
GC25-4x6*
GC25-6x4
GC25-6x5
GC25-6x6*
GC25-6x8
GC25-8x8
GC25-8x10
GC25-10x10
GC25-10x12*
GC25-12x12*
GC25-12x16*
GC25-16x16*
GC25 20x20
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/4”
1”
1-1/4”
Thread
Size
7/16x20
1/2x20
9/16x18
7/16x20
1/2x20
9/16x18
3/4x16
3/4x16
7/8x14
7/8x14
1-1/16x12
7/8x14
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
Tube
O.D.
1/4”
5/16”
3/8”
1/4”
5/16”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
5/8”
3/4”
1”
1”
1-1/4”
A-Drop
Inches
0.81
0.83
0.91
0.81
0.83
0.91
1.15
1.15
1.23
1.23
1.88
1.23
1.88
2.20
2.20
3.31
Nut
Hex
9/16”
5/8”
11/16”
9/16”
5/8”
11/16”
7/8”
7/8”
1”
1”
1-1/4”
1”
1-1/4”
1-1/2”
1-1/2”
2”
Part
No.
GC26-4x4
GC26-4x5
GC26-4x6*
GC26-6x4
GC26-6x5
GC26-6x6*
GC26-6x8
GC26-8x8
GC26-8x10
GC26-10x10
GC26-10x12*
GC26-12x10
GC26-12x12*
GC26-12x16*
GC26-16x16*
GC26-20x20
H
Fabrication Equipment
J
Cross Reference
K
Thread Identification
* JIC Seat and thread only.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
G
Part
No.
GC17-6x6
GC17-6x8
GC17-8x8
GC17-8x10
Thread
Size
7/16x20
1/2x20
9/16x18
7/16X20
1/2x20
9/16x18
3/4x16
3/4x16
7/8x14
7/8x14
1-1/16x12
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
Adapters
Nut
Hex
11/16”
7/8”
7/8”
1”
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
1”
1-1/4”
F
Tube
O.D.
3/8”
1/2”
1/2”
5/8”
Part
No.
GC09-4x4
GC09-4x5
GC09-4x6
GC09-6x4
GC09-6x6
GC09-6x8
GC09-6x10
GC09-6x12
GC09-8x6
GC09-8x8
GC09-8x10
GC09-8x12
GC09-8x16
GC09-10x8
GC09-10x10
GC09-10x12
GC09-12x10
GC09-12x12
GC09-12x14
GC09-12x16
GC09-16x12
GC09-16x16
GC09-16x20
GC09-20x20
GC09-24x24
GC09-32x32
Reusables, Pushon, Acces.
Thread
Size
9/16x18
3/4x16
3/4x16
7/8x14
Nut
Hex
9/16”
5/8”
11/16”
9/16”
11/16”
7/8”
1”
1-1/4”
11/16”
7/8”
1”
1-1/4”
1-1/2”
7/8”
1”
1-1/4”
1”
1-1/4”
1-1/2”
1-1/2”
1-1/4”
1-1/2”
2”
2”
2-1/4”
2-7/8”
E
Hose
I.D.
3/8”
3/8”
1/2”
1/2”
Hex
Size
9/16”
9/16”
9/16”
11/16”
11/16”
11/16”
7/8”
1”
7/8”
7/8”
7/8”
1-1/8”
1-1/4”
15/16”
15/16”
1-1/8”
1-1/8”
1-1/8”
1-3/8”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
1-11/16”
2”
2-1/2”
Refrigerant
Tube
O.D.
1/4”
5/16”
3/8”
1/4”
3/8”
1/2”
5/8”
3/4”
3/8”
1/2”
5/8”
3/4”
1”
1/2”
5/8”
3/4”
5/8”
3/4”
7/8”
1”
3/4”
1”
1-1/4”
1-1/4”
1-1/2”
2”
D
Thread
Size
7/16x20
1/2x20
9/16x18
7/16x20
9/16x18
3/4x16
7/8x14
1-1/16x12
9/16x18
3/4x16
7/8x14
1-1/16x12
1-5/16x12
3/4x16
7/8x14
1-1/16x12
7/8x14
1-1/16x12
1-3/16x12
1-5/16x12
1-1/16x12
1-5/16x12
1-5/8x12
1-5/8x12
1-7/8x12
2-1/2x12
Thermoplastic
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
3/4”
1”
1”
1”
1-1/4”
1-1/2”
2”
C-3
Bite to the Wire Hydraulic Hose ends for 100R1/1SN thin
cover (57MB-1, 56MB-1), 100R2 thin cover (57MB-2,
56MB-2), 2SN (2SN), HY-PLUS I (HPI), & III (HPIII),
100R16/2SC (R16), 100R17 (R17), Dura-Hyd R16, R17, EX
(DH16, DH17, DHEX16), Ultra R16, 100R3, and 100R4
hose. Grip-Crimp couplings can be crimped in virtually all
adjustable crimp machines. Some non-adjustable crimp
equipment can produce crimp dimensions within CSI’s
recommended crimp specification. (see pg C9)
Cross reference pages J11-J12
Trivalent Zinc Plating
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
1”
Thread
Size
7/16x20
9/16x18
3/4x16
1-1/16x12
1-5/16x12
Tube
O.D.
1/4”
3/8”
1/2”
3/4”
1”
A-Drop
Inches
1.26
1.50
1.63
2.28
2.79
Nut
Hex
9/16”
11/16”
7/8”
1-1/4”
1-1/2”
Thread
Size
5/8x18
Tube
O.D.
3/8”
A-Drop Nut
Inches Hex
0.59
3/4”
Part
No.
GC22-6x6
Hose
I.D.
3/8”
3/8”
Thread
Size
5/8x18
5/8x18
Tube
O.D.
3/8”
3/8”
A-Drop
Inches
0.91
2.18
Nut
Hex
3/4”
3/4”
Part
No.
GC23-6x6
GC23-6x6L
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
1”
Thread
Size
7/16x20
1/2x20
9/16x18
9/16x18
3/4x16
7/8x14
3/4x16
7/8x14
1-1/16x12
3/4x16
7/8x14
1-1/16x12
7/8x14
1-1/16x12
1-5/16x12
Tube
O.D.
1/4”
5/16”
3/8”
3/8”
1/2”
5/8”
1/2”
5/8”
3/4”
1/2”
5/8”
3/4”
5/8”
3/4”
1”
Hex
Size
9/16”
5/8”
11/16”
11/16”
7/8”
1”
7/8”
1”
1-1/4”
15/16”
1”
1-1/4”
1-1/8”
1-1/4”
1-1/2”
Part
No.
GC11-4x4
GC11-4x5
GC11-4x6
GC11-6x6
GC11-6x8
GC11-6x10
GC11-8x8
GC11-8x10
GC11-8x12
GC11-10x8
GC11-10x10
GC11-10x12
GC11-12x10
GC11-12x12
GC11-16x16
Thread
Size
7/16x20
9/16x18
3/4x16
3/4x16
7/8x14
1-1/16x12
1-5/16x12
Tube
O.D.
1/4”
3/8”
1/2”
1/2”
5/8”
3/4”
1”
Nut
Hex
5/8”
7/8”
7/8”
7/8”
1”
1-1/4”
1-1/2”
Part
No.
GC12-4x4
GC12-6x6
GC12-6x8
GC12-8x8
GC12-8x10
GC12-12x12
GC12-16x16
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
5/8”
3/4”
1”
Thread
Size
7/16x20
1/2x20
9/16x18
7/16x20
9/16x18
3/4x16
3/4x16
7/8x14
7/8x14
1-1/16x12
1-5/16x12
Tube
O.D.
1/4”
5/16”
3/8”
1/4”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
1”
A-Drop
Inches
1.80
1.80
2.18
1.80
2.18
2.50
2.50
2.75
2.75
3.73
4.50
Hose
I.D.
3/8”
3/4”
Thread
Size
5/8x18
1-1/16x14
Tube
O.D.
3/8”
3/4”
Hex
Size
3/4”
1-1/8”
Tube
O.D.
3/8”
3/8”
3/4”
Hose
I.D.
1/4”
3/8”
Hex
Nut
Part
3/8”
Size
Hex
No.
1/2”
11/16” 3/4”
GC07-4x6
1/2”
3/4”
13/16” GC07-6x6
3/4”
1-1/8” 1-1/4” GC07-12x12 1”
Hose
I.D.
1/4”
3/8”
3/4”
Thread
Size
5/8x18
5/8x18
1-1/16x14
* Note: Swivel for installation purposes only.
+ JIC Seat and thread only
Nut
Hex
9/16”
5/8
11/16”
9/16”
11/16”
7/8”
7/8”
1”
1”
1-1/4”
1-1/2”
Hose
Part
I.D.
No.
3/8”
GC24-4x4
GC24-6x6+
GC24-8x8
GC24-12x12+
GC24-16x16+
Part
No.
GC27-4x4
GC27-4x5
GC27-4x6+
GC27-6x4
GC27-6x6+
GC27-6x8
GC27-8x8
GC27-8x10
GC27-10x10
GC27-12x12+
GC27-16x16+
Part
No.
GC06-6x6
GC06-12x12
Leakage may occur at low pressure.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-4
Hex
Size
5/8”
3/4”
7/8”
1”
1-1/8”
1-3/8”
Part
No.
GC21-4x4
GC21-6x6
GC21-8x8
GC21-10x10
GC21-12x12
GC21-16x16
E
Refrigerant
F
Reusables, Pushon, Acces.
Part
No.
GC29-4x4
GC29-6x6
GC29-6x8
GC29-8x8
GC29-8x10
GC29-8x12
GC29-10x10
GC29-10x12
GC29-12x12
GC29-16x16
D
G
Adapters
J
Cross Reference
K
Thread Identification
Tube Nut
Part
O.D.
Hex
No.
1/4”
11/16”
GC30-4x4
3/8”
13/16”
GC30-4x6
1/2”
15/16”
GC30-4x8
1/4”
11/16”
GC30-6x4
3/8”
13/16”
GC30-6x6
1/2”
15/16”
GC30-6x8
3/8”
13/16”
GC30-8x6
1/2”
15/16”
GC30-8x8
5/8”
1-1/8”
GC30-8x10
3/4”
1-3/8”
GC30-8x12
5/8”
1-1/8”
GC30-10x10
3/4”
1-3/8”
GC30-10x12
5/8”
1-1/8”
GC30-12x10
3/4”
1-3/8”
GC30-12x12
1”
1-5/8”
GC30-12x16
1”
1-5/8”
GC30-16x16
1-1/4” 1-7/8”
GC30-20x20
For ORF O-Rings see page 10B.
H
C-5
Thread
Size
9/16x18
11/16x16
13/16x16
9/16x18
11/16x16
13/16x16
11/16x16
13/16x16
1x14
1-3/16x12
1x14
1-3/16x12
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
Fabrication Equipment
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
Part
1/2”
No.
5/8”
GC13-4x4
5/8”
GC13-6x6
3/4”
GC13-8x8
3/4”
GC1312x12 3/4”
GC13-16x16 1”
1-1/4”
* Note: Swivel for installation purposes only.
Leakage may occur at low pressure.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Tube
Rise
1.10
1.30
1.58
1.34
1.17
1.30
Hose Thread
Tube Hex
I.D.
Size
O.D.
Size
1/4”
9/16x18
1/4”
5/8”
3/8”
11/16x16
3/8”
3/4”
3/8”
13/16x16
1/2”
7/8”
1/2”
13/16x16
1/2”
7/8”
1/2”
1x14
5/8”
1-1/16”
1/2”
1-3/16x12
3/4”
1-1/4”
5/8”
1x14
5/8”
1-1/16”
5/8”
1-3/16x12
3/4”
1-1/4”
3/4”
1-3/16x12
3/4”
1-1/4”
1”
1-7/16x12
1”
1-1/2”
Couplings are capped with O-ring included.
Sleeve
Part No.
719x4
719x5
719x6
719x8
719x10
719x12
719x16
Hose
I.D.
1/4”
3/8”
1/2”
3/4”
1”
Tube
Size
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Thermoplastic
Part
No.
GC28-4x4
GC28-4x5
GC28-6x5
GC28-6x6
GC28-6x8
GC28-8x8
GC28-8x10
GC28-12x12
GC28-16x16
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
C
Nut
Hex
9/16”
5/8”
5/8”
11/16”
7/8”
7/8”
15/16”
1-1/4”
1-1/2”
Part
No.
GC15-6x6
GC15-6x8
GC15-6x10
GC15-8x8
GC15-8x10
GC15-12x12
GC15-16x16
Grip Crimp
Thread
Tube Hex
Size
O.D.
Size
7/16x20
1/4”
9/16”
1/2x20
5/16” 9/16”
1/2x20
5/16” 11/16”
9/16x18
3/8”
11/16”
3/4x16
1/2”
3/4”
3/4x16
1/2”
7/8”
7/8x14
5/8”
7/8”
1-1/16x12
3/4”
1-1/8”
1-5/16x12
1”
1-3/8”
Nuts and Sleeves
Tube
Nut
Size
Part No.
1/4”
718x4
5/16”
718x5
3/8”
718x6
1/2”
718x8
5/8”
718x10
3/4”
718x12
1”
718x16
Nut
Hex
3/4”
7/8”
1”
7/8”
1”
1-1/4”
1-1/2”
B
Tube
O.D.
3/8”
1/2”
5/8”
1/2”
5/8”
3/4”
1”
Vari-Crimp
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Thread
Size
9/16x18
3/4x16
7/8x14
3/4x16
7/8x14
1-1/16x12
1-5/16x12
A
Hose
I.D.
3/8”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Bulk Hose
Bite to the Wire Hydraulic Hose ends for 100R1/1SN thin
cover (57MB-1, 56MB-1), 100R2 thin cover (57MB-2,
56MB-2), 2SN (2SN), HY-PLUS I (HPI), & III (HPIII),
100R16/2SC (R16), 100R17 (R17), Dura-Hyd R16, R17, EX
(DH16, DH17, DHEX16), Ultra R16, 100R3, and 100R4
hose. Grip-Crimp couplings can be crimped in virtually all
adjustable crimp machines. Some non-adjustable crimp
equipment can produce crimp dimensions within CSI’s
recommended crimp specification. (see pg C9)
Cross reference pages J11-J12
Trivalent Zinc Plating
Bite to the Wire Hydraulic Hose ends for 100R1/1SN thin
cover (57MB-1, 56MB-1), 100R2 thin cover (57MB-2,
56MB-2), 2SN (2SN), HY-PLUS I (HPI), & III (HPIII),
100R16/2SC (R16), 100R17 (R17), Dura-Hyd R16, R17, EX
(DH16, DH17, DHEX16), Ultra R16, 100R3, and 100R4
hose. Grip-Crimp couplings can be crimped in virtually all
adjustable crimp machines. Some non-adjustable crimp
equipment can produce crimp dimensions within CSI’s
recommended crimp specification. (see pg C9)
Cross reference pages J11-J12
Trivalent Zinc Plating
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
3/4”
5/8”
3/4”
3/4”
1”
1-1/4”
Thread
Size
9/16x18
11/16x16
11/16x16
13/16x16
11/16x16
13/16x16
1x14
1x14
1x14
1-3/16x12
1-3/16x12
1-7/16x20
1-7/16x12
1-11/16x12
Tube
O.D.
1/4”
3/8”
3/8”
1/2”
3/8”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
1”
1”
1-1/4”
A-Drop
Inches
0.41
0.48
0.43
0.60
0.43
0.59
0.68
0.68
0.68
0.83
0.83
1.15
1.15
1.07
Nut
Hex
11/16”
13/16”
13/16”
15/16”
13/16”
15/16”
1-1/8”
1-1/8”
1-1/8”
1-3/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
Part
No.
GC31-4x4
GC31-4x6
GC31-6x6
GC31-6x8
GC31-8x6
GC31-8x8
GC31-8x10
GC31-10x10
GC31-12x10
GC31-10x12
GC31-12x12
GC31-12x16
GC31-16x16
GC31-20x20
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/4”
1”
1-1/4”
Thread
Size
9/16x18
11/16x16
9/16x18
11/16x16
13/16x16
11/16x16
13/16x16
1x14
1x14
1-3/16x12
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
Tube
O.D.
1/4”
3/8”
1/4”
3/8”
1/2”
3/8”
1/2”
5/8”
5/8”
3/4”
5/8”
3/4”
1”
1”
1-1/4”
A-Drop
Inches
0.78
0.90
0.78
0.90
1.15
0.90
1.15
1.27
1.27
1.88
1.27
1.88
2.20
2.20
2.51
Nut
Hex
11/16”
13/16”
11/16”
13/16”
15/16”
13/16”
15/16”
1-1/8”
1-1/8”
1-3/8”
1-1/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
Part
No.
GC32-4x4
GC32-4x6
GC32-6x4
GC32-6x6
GC32-6x8
GC32-8x6
GC32-8x8
GC32-8x10
GC32-10x10
GC32-10x12
GC32-12x10
GC32-12x12
GC32-12x16
GC32-16x16
GC32-20x20
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
1-1/4”
Thread
Size
9/16x18
11/16x16
13/16x16
11/16x16
13/16x16
1-3/16x12
1-7/16x12
1-11/16x12
Tube
O.D.
1/4”
3/8”
1/2”
3/8”
1/2”
3/4”
1”
1-1/4”
A-Drop
Inches
1.26
1.51
1.62
1.51
1.62
2.28
2.78
3.09
Nut
Hex
11/16”
13/16”
15/16”
13/16”
15/16”
1-3/8”
1-5/8”
1-7/8”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part
No.
GC34-4x4
GC34-6x6
GC34-6x8
GC34-8x6
GC34-8x8
GC34-12x12
GC34-16x16
GC34-20x20
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
5/8”
3/4”
1”
Thread
Size
9/16x18
11/16x16
11/16x16
13/16x16
13/16x16
1x14
1x14
1-3/16x12
1-7/16x12
Tube
O.D.
1/4”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
1”
A-Drop
Inches
1.80
2.13
2.13
2.51
2.51
2.76
2.76
3.78
4.50
Nut
Hex
11/16”
13/16”
13/16”
15/16”
15/16”
1-1/8”
1-1/8”
1-3/8”
1-5/8”
Part
No.
GC33-4x4
GC33-4x6
GC33-6x6
GC33-6x8
GC33-8x8
GC33-8x10
GC33-10x10
GC33-12x12
GC33-16x16
Nut
Hex
3/8”
7/16”
1/2”
7/16”
1/2”
5/8”
11/16”
3/4”
Part
No.
GC18-4x3
GC18-4x4
GC18-4x5
GC18-6x4
GC18-6x5
GC18-6x6
GC18-6x7
GC18-8x8
Nut
Hex
3/8”
7/16”
1/2”
7/16”
1/2”
5/8”
11/16”
3/4”
Part
No.
GC19-4x3
GC19-4x4
GC19-4x5
GC19-6x4
GC19-6x5
GC19-6x6
GC19-6x7
GC19-8x8
For ORF O-Rings see page B-6.
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
Thread
Size
3/8x24
7/16x24
1/2x20
7/16x24
1/2x20
5/8x18
11/16x18
3/4x18
Tube
O.D.
3/16”
1/4”
5/16”
1/4”
5/16”
3/8”
7/16”
1/2”
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
Thread
Size
3/8x24
7/16x24
1/2x20
7/16x24
1/2x20
5/8x18
11/16x18
3/4x18
Tube
O.D.
3/16”
1/4”
5/16”
1/4”
5/16”
3/8”
7/16”
1/2”
C-6
A-Drop
Inches
0.69
1.08
1.10
0.93
1.10
1.03
1.34
1.13
A
Bulk Hose
B
Vari-Crimp
Bite to the Wire Hydraulic Hose ends for 100R1/1SN thin
cover (57MB-1, 56MB-1), 100R2 thin cover (57MB-2,
56MB-2), 2SN (2SN), HY-PLUS I (HPI), & III (HPIII),
100R16/2SC (R16), 100R17 (R17), Dura-Hyd R16, R17, EX
(DH16, DH17, DHEX16), Ultra R16, 100R3, and 100R4
hose. Grip-Crimp couplings can be crimped in virtually all
adjustable crimp machines. Some non-adjustable crimp
equipment can produce crimp dimensions within CSI’s
recommended crimp specification. (see pg C9)
Cross reference pages J11-J12
Trivalent Zinc Plating
Split Flange Kits
(Code 61)
Part
No.
GC20-4x3
GC20-4x4
GC20-4x5
GC20-6x4
GC20-6x5
GC20-6x6
GC20-6x7
GC20-8x8
O-Ring
Part No.
8252
12252
16252
20252
24252
32252
H
J
Cross Reference
K
Thread Identification
C-7
Fabrication Equipment
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part
No.
GC53-8x8
GC53-8x12
GC53-12x12
GC53-12x16
GC53-16x16
GC53-16x20
GC53-20x20
G
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
Adapters
B
Drop
1.62
1.68
2.12
2.12
2.38
2.38
2.62
Hose BSPP Thread
Hex
Nut
Part
I.D.
Size
Size
Size
Hex
No.
1/4”
1/4”
G-1/4-19
9/16” 3/4”
GC10-4x4
1/4”
3/8”
G-3/8-19
3/4”
7/8”
GC10-4x6
3/8”
3/8”
G-3/8-19
3/4”
7/8”
GC10-6x6
3/8”
1/2”
G-1/2-14
3/4”
1”
GC10-6x8
1/2”
1/2”
G-1/2-14
7/8”
1”
GC10-8x8
5/8”
5/8”
G-5/8-14
15/16” 1-3/16” GC10-10x10
3/4”
3/4”
G-3/4-14
1-1/8” 1-1/4” GC10-12x12
1”
1”
G-1-11
1-3/8” 1-1/2” GC10-16x16
1-1/4” 1-1/4” G-1-1/4-11
1-11/16”1-7/8” GC10-20x20
G. as part of thread size is ISO designation for parallel thread
F
B
Drop
0.78
0.82
1.00
1.00
1.12
1.12
1.12
Reusables, Pushon, Acces.
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
Hose BSPP
Thread
Hex
Part
I.D.
Size
Size
Size
No.
1/4”
1/4”
G-1/4-19
11/16” GC36-4x4
Part
3/8”
3/8”
G-3/8-19
3/4”
GC36-6x6
No.
3/8”
1/2”
G-1/2-14
1”
GC36-6x8
GC50-8x8
1/2”
3/8”
G-3/8-19
7/8”
GC36-8x6
GC50-8x12 1/2”
1/2”
G-1/2-14
1”
GC36-8x8
GC50-12x12 3/4”
3/4”
G-3/4-14
1-1/8” GC36-12x12
GC50-12x16 G. as part of thread size is ISO designation for parallel thread
GC50-16x16
GC50-16x20
GC50-20x20
E
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
Hose BSPT Thread
Hex
Part
I.D.
Size
Size
Size
No.
Part
1/4”
1/4”
R-1/4-19
5/8”
GC35-4x4
No.
3/8”
3/8”
R-3/8-19
3/4”
GC35-6x6
GC47-8x8
1/2”
1/2”
R-1/2-14
7/8”
GC35-8x8
GC47-8x12
3/4”
R-3/4-14
1-1/8”
GC35-12x12
GC47-12x12 3/4”
R.
as
part
of
thread
size
is
ISO
designation
for
tapered
thread
GC47-12x16
GC47-16x16
GC47-16x20
GC47-20x20
Refrigerant
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
Nut
Hex
3/8”
7/16”
1/2”
7/16”
1/2”
5/8”
11/16”
3/4”
Complete
Kit No.
SFK-8
SFK-12
SFK-16
SFK-20
SFK-24
SFK-32
D
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
A-Drop
Inches
1.06
1.23
1.38
1.36
1.38
1.63
1.97
2.20
C
11/32
13/32
13/32
15/32
17/32
17/32
Thermoplastic
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
Tube
O.D.
3/16”
1/4”
5/16”
1/4”
5/16”
3/8”
7/16”
1/2”
B
.69
.88
1.03
1.19
1.41
1.69
C
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
Thread
Size
3/8x24
7/16x24
1/2x20
7/16x24
1/2x20
5/8x18
11/16x18
3/4x18
A
1.50
1.88
2.06
2.31
2.75
3.06
Grip Crimp
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
Flange
Size
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
Bite to the Wire Hydraulic Hose ends for 100R1/1SN thin
cover (57MB-1, 56MB-1), 100R2 thin cover (57MB-2,
56MB-2), 2SN (2SN), HY-PLUS I (HPI), & III (HPIII),
100R16/2SC (R16), 100R17 (R17), Dura-Hyd R16, R17, EX
(DH16, DH17, DHEX16), Ultra R16, 100R3, and 100R4
hose. Grip-Crimp couplings can be crimped in virtually all
adjustable crimp machines. Some non-adjustable crimp
equipment can produce crimp dimensions within CSI’s
recommended crimp specification. (see pg C9)
Cross reference pages J11-J12
Trivalent Zinc Plating
Hose BSPP Thread
A-Drop Nut
Part
I.D.
Size
Size
Inches Hex
No.
1/4”
1/4”
G-1/4-19
0.91
3/4”
GC43-4x4
3/8”
3/8”
G-3/8-19
0.90
7/8”
GC43-6x6
1/2”
1/2”
G-1/2-14
0.87
1”
GC43-8x8
3/4”
3/4”
G-3/4-14
1.31
1-1/4” GC43-12x12
G. as part of thread size is ISO designation for parallel thread
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
5/8”
3/4”
Thread
Size
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2.0
Hose BSPP Thread
A-Drop Nut
Part
I.D.
Size
Size
Inches Hex
No.
1/4”
1/4”
G-1/4-19
1.50
3/4”
GC46-4x4
3/8”
3/8”
G-3/8-19
1.60
7/8”
GC46-6x6
1/2”
1/2”
G-1/2-14
1.89
1”
GC46-8x8
5/8”
5/8”
G-5/8-14
1.83
1-3/16” GC46-10x10
3/4”
3/4”
G-3/4-14
2.49
1-1/4” GC46-12x12
1”
1”
G-1-11
2.98
1-1/2” GC46-16x16
G. as part of thread size is ISO designation for parallel thread
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
1/2”
5/8”
3/4”
1”
Tube
Size
6mm
8mm
10mm
10mm
12mm
15mm
18mm
22mm
28mm
Thread
Size
M12x1.5
M14x1.5
M16x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2.0
M36x2.0
Hex
Size
5/8”
5/8”
5/8”
11/16”
11/16”
7/8”
15/16”
1-1/8”
1-3/8”
Nut
Hex
11/16”
11/16”
3/4”
3/4”
7/8”
1-1/16”
1-1/4”
1-1/2”
1-7/8”
Part
No.
GC37-4x6
GC37-4x8
GC37-4x10
GC37-6x10
GC37-6x12
GC37-8x15
GC37-10x18
GC37-12x22
GC37-16x28
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
1/2”
5/8”
3/4”
Tube
Size
8mm
10mm
10mm
12mm
15mm
18mm
22mm
Thread
Size
M14x1.5
M16x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2.0
A-Drop
Inches
0.97
0.96
0.96
1.00
1.18
1.25
1.41
Nut
Hex
11/16”
3/4”
3/4”
7/8”
1-1/16”
1-1/4”
1-1/2”
Part
No.
GC41-4x8
GC41-4x10
GC41-6x10
GC41-6x12
GC41-8x15
GC41-10x18
GC41-12x22
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
1/2”
5/8”
3/4”
Tube
Size
8mm
10mm
10mm
12mm
15mm
18mm
22mm
Thread
Size
M14x1.5
M16x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2.0
Nut
Hex
11/16”
3/4”
3/4”
7/8”
1-1/16”
1-1/4”
1-1/2”
Part
No.
GC44-4x8
GC44-4x10
GC44-6x10
GC44-6x12
GC44-8x15
GC44-10x18
GC44-12x22
Hose Tube Thread
Hex
Nut
Part
I.D.
Size
Size
Size
Hex
No.
1/4”
1/4”
G-1/4-19
5/8”
3/4”
GC40-4x4
3/8”
3/8”
G-3/8-19
11/16” 7/8”
GC40-6x6
1/2”
1/2”
G-1/2-14
7/8”
1-1/16” GC40-8x8
3/4”
3/4”
G-3/4-14
1-1/8” 1-1/4” GC40-12x12
1”
1”
G-1-11
1-3/8” 1-1/2” GC40-16x16
G. as part of thread size is ISO designation for parallel thread
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
Thread
Size
M14x1.5
M18x1.5
M22x1.5
M24x1.5
M30x1.5
M33x1.5
M36x1.5
Hex
Nut
Size
Hex
5/8”
3/4”
11/16” 7/8”
7/8”
1”
1”
1-1/4”
1-1/8” 1-3/8”
1-3/8” 1-1/2”
1-11/16”1-7/8”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part
No.
GC39-4x14
GC39-6x18
GC39-8x22
GC39-10x24
GC39-12x30
GC39-16x33
GC39-20x36
C-8
Tube
O.D.
8mm
10mm
12mm
15mm
18mm
22mm
Hex
Size
5/8”
3/4”
3/4”
7/8”
1-1/16”
1-1/4”
A-Drop
Inches
1.48
1.65
1.65
1.65
1.93
2.31
2.59
Part
No.
GC66-4x8
GC66-6x10
GC66-6x12
GC66-8x15
GC66-10x18
GC66-12x22
A
Bulk Hose
B
Vari-Crimp
Bite to the Wire Hydraulic Hose ends for 100R1/1SN thin
cover (57MB-1, 56MB-1), 100R2 thin cover (57MB-2,
56MB-2), 2SN (2SN), HY-PLUS I (HPI), & III (HPIII),
100R16/2SC (R16), 100R17 (R17), Dura-Hyd R16, R17, EX
(DH16, DH17, DHEX16), Ultra R16, 100R3, and 100R4
hose. Grip-Crimp couplings can be crimped in virtually all
adjustable crimp machines. Some non-adjustable crimp
equipment can produce crimp dimensions within CSI’s
recommended crimp specification. (see pg C9)
Cross reference pages J11-J12
Trivalent Zinc Plating
Grip-Crimp Crimp Diameter Charts:
Part
No.
GC38-4x8
GC38-4x10
GC38-6x10
GC38-6x12
GC38-6x14
GC38-8x16
GC38-10x20
GC38-12x20
GC38-12x25
GC38-16x30
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
5/8”
Tube
Size
10mm
12mm
14mm
16mm
20mm
Thread
Size
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2.0
A-Drop
Inches
1.50
1.95
2.07
2.05
2.38
Nut
Hex
7/8”
1”
1-1/16”
1-1/8”
1-1/2”
Part
No.
GC45-4x10
GC45-6x12
GC45-6x14
GC45-8x16
GC45-10x20
Reduced OD 100R17 (R17)
(1/4”-1”)
J
Part
No.
GC42-4x10
GC42-6x12
GC42-8x16
GC42-10x20
Cross Reference
Nut
Hex
7/8”
1”
1-1/8”
1-1/2”
0.630
0.800
0.925
1.070
1.255
1.600
H
A-Drop
Inches
0.96
1.13
1.25
1.50
1/4”
3/8”
1/2”
5/8”
3/4”
1”
Fabrication Equipment
Thread
Size
M18x1.5
M20x1.5
M24x1.5
M30x2.0
0.695
0.875
0.995
1.110
1.295
1.640
2.020
2.340
2.785
G
Tube
Size
10mm
12mm
16mm
20mm
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
1-1/2”
2”
Adapters
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
100R2AT (57MB-2)
(1/4”-1”)
100R2AT (56MB-2)
(1/4”-2”)
2SN (2SN)
(1/4”-2”)
Hy-Plus II (HPII)
(3/4”-1”)
Hydraulic Jack Hose (JH2)
(1/4”-3/8”)
100R3 (3319A)
(1/4”-1”)
100R4 (104MB)
(3/4”-2”)
0.655
0.835
0.955
1.070
1.255
1.600
1.980
2.300
2.745
F
Nut
Hex
3/4”
7/8”
7/8”
1”
1-1/16”
1-1/8”
1-1/2”
1-1/2”
1-7/8”
2”
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
1-1/2”
2”
Reusables, Pushon, Acces.
Hex
Size
5/8”
5/8”
3/4”
3/4”
3/4”
7/8”
1-1/8”
1-1/8”
1-3/8”
1-11/16”
100R1AT (57MB-1)
(1/4”-1”)
100R1AT/1SN (56MB-1)
(1/4”-2”)
Hy-Plus I (HPI)
(1/4”-1”)
100R17 One Wire Dim. (R17R)
(1/4”-1/2”)
Dura-Hyd R17 (DH17)
(1/4”-1”)
Hy-Plus III (HPIII)
(1/4”-1”)
100R16/2SC (R16)
(1/4”-1”)
Dura-Hyd R16/2SC (DH16)
(1/4”-1”)
Dura-Hyd EX R16/2SC (DHEX16)
(1/4”-1”)
Ultra R16/2SC
(1/4”-1”)
2SK High Pressure (1/4”-3/4”)
E
Thread
Size
M16x1.5
M18x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2.0
M30x2.0
M36x2.0
M42x2.0
Part
No.
GC67-4x8
GC67-4x10
GC67-6x10
GC67-6x12
GC67-6x14
GC67-8x16
GC67-10x20
Refrigerant
Tube
Size
8mm
10mm
10mm
12mm
14mm
16mm
20mm
20mm
25mm
30mm
Hex
Size
5/8”
11/16”
3/4”
13/16”
7/8”
7/8”
1-1/4”
D
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
5/8”
3/4”
3/4”
1”
Tube
O.D.
8mm
10mm
10mm
12mm
14mm
16mm
20mm
Thermoplastic
Thread
Size
M16x1.5
M18x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2.0
Coupling
Crimp O.D.
C
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
5/8”
Hose
I.D.
Grip Crimp
Hose
Description
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-9
Bite to the Wire Hose ends for 1/4” thru 1/2” pressure wash
hose. Grip-Crimp couplings can be crimped in virtually all
adjustable crimp machines. Some non-adjustable crimp
equipment can produce crimp dimensions within CSI’s recommended crimp specification.
50 piece minimum purchase.
Pressure wash grips on page F-3.
Pressure Wash Couplings
M22 x 1.5 Thread
Trivalent Zinc Plating
Hose
I.D.
1/4”
1/4”
3/8”
1/2”
Pipe
Size
1/4”
3/8”
3/8”
1/2”
Thread
Size
1/4-18
3/8-18
3/8-18
1/2-14
Hex
Size
5/8”
3/4”
11/16”
7/8”
Part
No.
GC01-4x4
GC01-4x6
PW01-6x6
GC01-8x8
Hose
I.D.
1/4”
1/4”
3/8”
1/2”
Pipe
Size
1/4”
3/8”
3/8”
1/2”
Thread
Size
1/4-18
3/8-18
3/8-18
1/2-14
Nut
Hex
5/8”
3/4”
3/4”
7/8”
Part
No.
GC04-4x4
GC04-4x6
PW04-6x6
GC04-8x8
Hose
I.D.
1/4”
3/8”
Hose
I.D.
1/4”
3/8”
1/2”
Thread
Size
M22x1.5
M22x1.5
Pipe
Size
1/4”
3/8”
1/2”
Thread
Size
1/4-18
3/8-18
1/2-14
Part
No.
PWM22-4x6
PWM22-6x6
Hex
Size
3/4”
7/8”
1”
Grip Crimp Pressure Wash Coupling Crimp Diameter Chart
Hose
1/4” PW4000 & PW4000BLU
3/8” PW4000 & PW4000BLU
3/8” PW6000 & PW6000BLU
Crimp Diameter
0.620
0.790
0.830
* Note: Swivel for installation purposes only.
Leakage may occur at low pressure.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-10
Part
No.
GC02-4x4
PW02-6x6
GC02-8x8
A
Bulk Hose
Bite to the Wire Hose Ends for 100R12 Four Spiral (SP580,
RC12B, and DHEXR12).
No skive required.
B
Vari-Crimp
The 4GC Series Four Spiral Coupling is compatible with
some fixed and virtually all adjustable spiral crimp machines
on the market. Check crimp O.D. carefully.
Cross reference page J13.
Trivalent Zinc Plating
C
Grip Crimp
Hex
Size
7/8”
1-1/8”
1-1/8”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
2-1/8”
2-3/4”
Part
No.
4GC01 8x8
4GC01 8x12
4GC01 12x12
4GC01 12x16
4GC01 16x12
4GC01 16x16
4GC01 20x20
4GC01 24x24
4GC01 32x32
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1-1/4”
Tube
Size
1/2”
5/8”
3/4”
7/8”
1”
1”
1-1/4”
Thread
Size
3/4x16
7/8x14
1-1/16x12
1-3/16x12
1-5/16x12
1-5/16x12
1-5/8x12
Hex
Size
7/8”
7/8”
1-1/8”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1-1/4”
1-1/2”
Tube
Size
1/2”
5/8”
3/4”
1”
1”
1-1/4”
1-1/2”
Thread
Size
3/4x16
7/8x14
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
1-7/8x12
A
Drop
.71
.84
1.12
1.15
1.15
1.69
1.70
Tube
Size
1/2”
5/8”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
Thread
Size
3/4x16
7/8x14
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
1-7/8x12
2-1/2x12
A
Drop
1.15
1.23
1.88
2.20
2.20
3.31
3.95
4.64
Part
No.
4GC08 8x8
4GC08 8x10
4GC08 12x12
4GC08 12x14
4GC08 12x16
4GC08 16x16
4GC08 20x20
E
Refrigerant
Thread
Size
1/2-14
3/4-14
3/4-14
1-11 1/2
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
2-11 1/2
D
Pipe
Size
1/2”
3/4”
3/4”
1”
3/4”
1”
1-1/4”
1-1/2”
2”
Thermoplastic
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
J
Part
No.
4GC26 8x8
4GC26 8x10
4GC26 12x12
4GC26 12x16
4GC26 16x16
4GC26 20x20
4GC26 24x24
4GC26 32x32
Cross Reference
K
Thread Identification
Hex
Size
7/8”
1-1/8”
1-3/8”
Nut
Hex
7/8”
1”
1-1/4”
1-1/2”
1-1/2”
2”
2-1/4”
2-7/8”
H
Thread
Size
G-1/2-14
G-3/4-14
G-1-11
Part
No.
4GC09 8x8
4GC09 8x10
4GC09 8x12
4GC09 12x12
4GC09 12x14
4GC09 12x16
4GC09 16x12
4GC09 16x16
4GC09 16x20
4GC09 20x20
4GC09 20x24
4GC09 24x24
4GC09 32x32 Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1-1/4”
1-1/2”
Nut
Part
2”
Hex
No.
1”
4GC10 8x8
1-1/4” 4GC10 12x12
1-1/2” 4GC10 16x16
Fabrication Equipment
BSPP
Size
1/2”
3/4”
1”
Nut
Hex
7/8”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
1-1/4”
1-1/2”
2”
2”
2-1/4”
2-1/4”
2-7/8”
G
Hose
I.D.
1/2”
3/4”
1”
Hex
Size
7/8”
7/8”
1-1/8”
1-1/8”
1-1/4”
1-3/8”
1-3/8”
1-3/8”
1-11/16”
1-11/16”
1-7/8”
2-1/8”
2-3/4”
Adapters
Thread
Size
3/4x16
7/8x14
1-1/16x12
1-1/16x12
1-3/16x12
1-5/16x12
1-1/16x12
1-5/16x12
1-5/8x12
1-5/8x12
1-7/8x12
1-7/8x12
2-1/2x12
F
Tube
Size
1/2”
5/8”
3/4”
3/4”
7/8”
1”
3/4”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
Part
No.
4GC25 8x8
4GC25 8x10
4GC25 12x12
4GC25 12x16
4GC25 16x16
4GC25 20x20
4GC25 24x24
Reusables, Pushon, Acces.
Hose
I.D.
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
Nut
Hex
7/8”
1”
1-1/4”
1-1/2”
1-1/2”
2”
2-1/4”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-11
Bite to the Wire Hose Ends for 100R12 Four Spiral (SP580,
RC12B, and DHEXR12).
No skive required.
The 4GC Series Four Spiral Coupling is compatible with
some fixed and virtually all adjustable spiral crimp machines
on the market. Check crimp O.D. carefully.
Cross reference page J13.
Trivalent Zinc Plating
Hose
I.D.
3/4”
1”
Tube
Size
3/4”
1”
Thread
Size
1-1/16x12
1-5/16x12
Hex
Size
1-1/8”
1-1/2”
Part
No.
4GC11 12x12
4GC11 16x16
Hose
I.D.
1/2”
3/4”
1”
Tube
Size
1/2”
3/4”
1”
Thread
Size
13/16x16
1-3/16x12
1-7/16x12
Hex
Size
7/8”
1-1/4”
1-1/2”
Part
No.
4GC29 8x8
4GC29 12x12
4GC29 16x16
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1-1/4”
Tube
Size
1/2”
5/8”
5/8”
3/4”
1”
1”
1-1/4”
Thread
Size
13/16x16
1x14
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
Nut
Hex
15/16”
1-1/8”
1-1/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1-1/4”
Tube
Size
1/2”
5/8”
3/4”
1”
1”
1-1/4”
Thread
Size
13/16x16
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
A
Drop
0.59
0.68
0.84
1.14
1.14
1.07
Part
No.
4GC30 8x8
4GC30 8x10
4GC30 12x10
4GC30 12x12
4GC30 12x16
4GC30 16x16
4GC30 20x20
Nut
Hex
15/16”
1-1/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1-1/4”
Tube
Size
1/2”
5/8”
5/8”
3/4”
1”
1”
1-1/4”
Thread
Size
13/16x16
1x14
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
A
Drop
1.15
1.27
1.27
1.88
2.20
2.20
2.51
Nut
Hex
15/16”
1-1/8”
1-1/8”
1-3/8”
1-5/8”
1-5/8”
1-7/8”
Hose
I.D.
1/2”
3/4”
1”
Tube
Size
1/2”
3/4”
1”
Thread
Size
13/16x16
1-3/16x12
1-7/16x12
A
Drop
2.51
3.78
4.50
Nut
Part
Hex
No.
15/16” 4GC33 8x8
1-3/8” 4GC33 12x12
1-5/8” 4GC33 16x16
“O” Ring
For ORF Seal
Couplings
Thread Size
13/16x16
1x14
1-3/16x12
1-7/16x12
1-11/16X12
Part
No.
4GC31 8x8
4GC31 8x10
4GC31 12x12
4GC31 12x16
4GC31 16x16
4GC31 20x20
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part
No.
4GC32 8x8
4GC32 8x10
4GC32 12x10
4GC32 12x12
4GC32 12x16
4GC32 16x16
4GC32 20x20
C-12
Tube Size
1/2”
5/8”
3/4”
1”
1-1/4”
“O” Ring
Part No.
4629x8
4629x10
4629x12
4629x16
4629x20
A
Bulk Hose
Bite to the Wire Hose Ends for 100R12 Four Spiral (SP580,
RC12B, and DHEXR12).
No skive required.
Part
No.
4GC49 12x12
4GC49 16x16
4GC49 20x20
Part
No.
4GC52 12x12
4GC52 12x16
4GC52 16x16
4GC52 20x20
K
Thread Identification
B
Drop
0.59
0.64
0.72
B
Drop
1.59
1.59
1.76
1.94
J
A-Dia.
Inches
1.50
1.75
2.00
A-Dia.
Inches
1.50
1.75
1.75
2.00
Cross Reference
Flange
Size
3/4”
1”
1-1/4”
Flange
Size
3/4”
1”
1”
1-1/4”
H
Hose
I.D.
3/4”
1”
1-1/4”
Hose
I.D.
3/4”
3/4”
1”
1-1/4”
Fabrication Equipment
Part
No.
4GC48 12x12
4GC48 12x16
4GC48 16x16
4GC48 16x20
4GC48 20x20
G
B
Drop
0.44
0.44
0.45
0.45
0.50
Part
No.
4GC51 12x12
4GC51 12x16
4GC51 16x16
4GC51 20x20
Adapters
A-Dia.
Inches
1.50
1.75
1.75
2.00
2.00
B
Drop
1.38
1.38
1.51
1.69
F
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
A-Dia.
Inches
1.50
1.75
1.75
2.00
Reusables, Pushon, Acces.
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
Flange
Size
3/4”
1”
1”
1-1/4”
E
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
2.38
2.38
2.81
Refrigerant
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
D
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
Part
No.
4GC50 8x8
4GC50 8x12
4GC50 12x12
4GC50 12x16
4GC50 16x16
4GC50 16x20
4GC50 20x20
4GC50 20x24
4GC50 24x24
4GC50 32x32
Thermoplastic
Thread
Size
M24x1.5
M36x2.0
M42x2.0
B
Drop
0.78
0.82
1.00
1.00
1.12
1.12
1.15
1.50
1.41
2.08
C
Tube
Size
16mm
25mm
30mm
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
2.38
2.38
2.81
Grip Crimp
Hose
I.D.
1/2”
3/4”
1”
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
B
Hose
I.D.
Hex
Nut
Part
1/2”
Size
Hex
No.
7/8”
1-1/8” 4GC38-8x16 1/2”
1-3/8” 1-7/8” 4GC38-12x25 3/4”
1-11/16” 2”
4GC38-16x30 3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
Part
2”
No.
4GC47 8x8
4GC47 8x12
4GC47 12x12
4GC47 12x16
4GC47 16x16
4GC47 16x20
Hose
4GC47 20x20
I.D.
4GC47 20x24
4GC47 24x24
3/4”
4GC47 32x32
3/4”
1”
1-1/4”
Vari-Crimp
The 4GC Series Four Spiral Coupling is compatible with
some fixed and virtually all adjustable spiral crimp machines
on the market. Check crimp O.D. carefully.
Cross reference page J13.
Trivalent Zinc Plating
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-13
Bite to the Wire Hose Ends for 100R12 Four Spiral (SP580,
RC12B, and DHEXR12).
No skive required.
The 4GC Series Four Spiral Coupling is compatible with
some fixed and virtually all adjustable spiral crimp machines
on the market. Check crimp O.D. carefully.
Cross reference page J13.
Trivalent Zinc Plating
Hose
I.D.
1/2”
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
Hose
I.D.
3/4”
1”
Hose
I.D.
3/4”
3/4”
Hose
I.D.
1”
Flange
Size
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
Flange
Size
3/4”
1”
Flange
Size
3/4”
1”
Flange
Size
1”
A-Dia.
Inches
1.19
1.50
1.50
1.75
1.75
2.00
2.00
2.38
2.38
2.81
A-Dia.
Inches
1.50
1.75
A-Dia.
Inches
1.50
1.75
A-Dia.
Inches
1.75
B
Drop
1.63
1.68
2.12
2.12
2.38
2.38
2.62
3.25
3.12
4.64
B
Drop
3.75
4.62
B
Drop
2.33
2.33
B
Drop
2.89
Part
No.
4GC53 8x8
4GC53 8x12
4GC53 12x12
4GC53 12x16
4GC53 16x16
4GC53 16x20
4GC53 20x20
4GC53 20x24
4GC53 24x24
4GC53 32x32
Hose
I.D.
3/4”
Flange
Size
3/4”
A-Dia.
Inches
1.50
B
Drop
3.00
Part
No.
4GC57 12x12
Split Flange Kits
(Code 61)
Flange
Size
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
A
1.50
1.88
2.06
2.31
2.75
3.06
B
.69
.88
1.03
1.19
1.41
1.69
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
A-Dia.
Inches
1.62
1.88
1.88
2.12
2.12
Hose
I.D.
3/4”
1”
1-1/4”
Flange
Size
3/4”
1”
1-1/4”
A-Dia.
Inches
1.62
1.88
2.12
C
11/32
13/32
13/32
15/32
17/32
17/32
Complete
Kit No.
SFK-8
SFK-12
SFK-16
SFK-20
SFK-24
SFK-32
O-Ring
No.
8252
12252
16252
20252
24252
32252
Part
No.
4GC54 12x12
4GC54 16x16
Part
No.
4GC55 12x12
4GC55 12x16
Part
No.
4GC56 16x16
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-14
Part
No.
4GC60 12x12
4GC60 12x16
4GC60 16x16
4GC60 16x20
4GC60 20x20
B
Drop
1.27
1.34
1.68
Part
No.
4GC61 12x12
4GC61 16x16
4GC61 20x20
A
Bulk Hose
Bite to the Wire Hose Ends for 100R12 Four Spiral (SP580,
RC12B, and DHEXR12).
No skive required.
Refrigerant
C
13/32
15/32
17/32
21/32
25/32
Complete
Kit No.
SFK62-12
SFK62-16
SFK62-20
SFK62-24
SFK62-32
O-Ring
No.
12252
16252
20252
24252
32252
F
B
.94
1.09
1.25
1.44
1.75
Reusables, Pushon, Acces.
A
2.00
2.25
2.63
3.12
3.81
E
Split Flange Kits
(Code 62)
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
D
Part
No.
4GC62 12x12
4GC62 12x16
4GC62 16x16
4GC62 16x20
4GC62 20x20
Thermoplastic
B
Drop
2.41
2.70
2.75
2.90
3.24
C
A-Dia.
Inches
1.62
1.88
1.88
2.12
2.12
Grip Crimp
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
B
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
Hose
Type
100R12
100R12
100R12
100R12
100R12
100R12
4GCSeries No Skive
100R12 Crimp Chart
(SP580, RC12B, & DHEXR12)
Hose
Crimp
ID
OD
1/2”
1.110
3/4”
1.365
1”
1.705
1-1/4”
2.035
1-1/2”
2.300
2”
2.785
Vari-Crimp
The 4GC Series Four Spiral Coupling is compatible with
some fixed and virtually all adjustable spiral crimp machines
on the market. Check crimp O.D. carefully.
Cross reference page J13.
Trivalent Zinc Plating
G
Adapters
H
Fabrication Equipment
J
Cross Reference
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-15
Bite to the Wire Hose Ends for 100R13 Spiral Hose (RC13 &
DHEXR13) 3/4” thru 2”, 100R15 Spiral Hose (RC15) 3/4”
thru 1-1/2”, & 4SH Spiral Hose 5/8”, 3/4”, and 1”.
No skive required.
The 6GC Series Six Spiral Coupling is compatible with some
fixed and virtually all adjustable spiral crimp machines on the
market. Check crimp O.D. carefully.
Cross reference page J13.
Trivalent Zinc Plating
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Hose
I.D.
1”
1-1/2”
2”
Pipe
Size
3/4”
1”
1-1/4”
1-1/2”
2”
Pipe
Size
1”
1-1/2”
2”
Thread
Size
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
2-11 1/2
Thread
Size
1-11 1/2
1-1/2-11 1/2
2-11 1/2
Hex
Size
1-1/8”
1-3/8”
1-11/16”
2”
2-1/2”
Hex
Size
1-3/8”
2”
2-1/2”
Hose
I.D.
5/8”
3/4”
3/4”
1”
1-1/4”
1-1/2”
2”
Tube
Size
5/8”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
Thread
Size
7/8x14
1-1/16x12
1-5/16x12
1-5/16x12
1-5/8x12
1-7/8x12
2-1/2x12
Hex
Size
15/16”
1-1/8”
1-3/8”
1-3/8”
1-11/16”
2”
2-1/2”
Hose
I.D.
3/4”
1”
Tube
Size
3/4”
1”
Thread
Size
1-1/16x12
1-5/16x12
A
Drop
1.50
1.75
Part
No.
6GC01 12x12
6GC01 16x16
6GC01 20x20
6GC01 24x24
6GC01 32x32
Part
No.
6GCAP 16x16
6GCAP 24x24
6GCAP 32x32
Nut
Hex
1”
1-1/4”
1-1/2”
1-1/2”
2”
2-1/4”
2-7/8”
Hose
I.D.
3/4”
1”
1-1/4”
Tube
Size
3/4”
1”
1-1/4”
Thread
Size
1-1/16x12
1-5/16x12
1-5/8x12
A
Drop
2.38
2.75
3.40
Nut
Hex
1-1/4”
1-1/2”
2”
Hose
I.D.
5/8”
3/4”
3/4”
1”
1-1/4”
1-1/2”
Tube
Size
5/8”
3/4”
1”
1”
1-1/4”
1-1/2”
Thread
Size
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
2x12
Nut
Hex
1-1/8”
1-3/8”
1-5/8
1-5/8”
1-7/8”
2-1/4”
Part
No.
6GC30 10x10
6GC30 12x12
6GC30 12x16
6GC30 16x16
6GC30 20x20
6GC30 24x24
Hose
I.D.
5/8”
3/4”
1”
1-1/4”
Tube
Size
5/8”
3/4”
1”
1-1/4”
Thread
Size
1x14
1-3/16x12
1-7/16x12
1-11/16x12
A
Drop
0.75
0.95
1.16
1.25
Nut
Hex
1-1/8”
1-3/8”
1-5/8”
1-7/8”
Part
No.
6GC31 10x10
6GC31 12x12
6GC31 16x16
6GC31 20x20
Tube
Size
5/8”
3/4”
1”
1”
1-1/4”
Thread
Size
1x14
1-3/16x12
1-7/16x12
1-7/16x12
1-11/16x12
A
Drop
1.50
2.00
2.50
2.50
2.80
Nut
Hex
1-1/8”
1-3/8”
1-5/8
1-5/8”
1-7/8”
Part
No.
6GC32 10x10
6GC32 12x12
6GC32 12x16
6GC32 16x16
6GC32 20x20
Part
No.
6GC09 10x10
6GC09 12x12
6GC09 12x16
6GC09 16x16
6GC09 20x20
6GC09 24x24 Hose
6GC09 32x32 I.D.
5/8”
3/4”
3/4”
1”
1-1/4”
Nut
Part
Hex
No.
1-1/4” 6GC25 12x12
1-1/2” 6GC25 16x16
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-16
Part
No.
6GC26 12x12
6GC26 16x16
6GC26 20x20
A
Bulk Hose
Bite to the Wire Hose Ends for 100R13 Spiral Hose (RC13 &
DHEXR13) 3/4” thru 2”, 100R15 Spiral Hose (RC15) 3/4”
thru 1-1/2”, & 4SH Spiral Hose 5/8”, 3/4”, and 1”.
No skive required.
A-Dia.
Inches
1.50
1.75
2.00
2.38
2.81
B
Drop
2.38
2.75
2.88
4.00
5.40
Part
No.
6GC53 12x12
6GC53 16x16
6GC53 20x20
6GC53 24x24
6GC53 32x32
C
13/32
13/32
15/32
17/32
17/32
Complete
Kit No.
SFK-12
SFK-16
SFK-20
SFK-24
SFK-32
O-Ring
No.
12252
16252
20252
24252
32252
B
Drop
2.50
2.50
2.75
2.88
3.25
3.75
5.38
Part
No.
6GC62 12x12
6GC62 12x16
6GC62 16x16
6GC62 16x20
6GC62 20x20
6GC62 24x24
6GC62 32x32
Split Flange Kits
(Code 62)
A
2.00
2.25
2.63
3.12
3.81
B
.94
1.09
1.25
1.44
1.75
C
13/32
15/32
17/32
21/32
25/32
Complete
Kit No.
SFK62-12
SFK62-16
SFK62-20
SFK62-24
SFK62-32
O-Ring
No.
12252
16252
20252
24252
32252
K
Thread Identification
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
J
B
.88
1.03
1.19
1.41
1.69
A-Dia.
Inches
1.62
1.88
1.88
2.12
2.12
2.50
3.12
Cross Reference
A
1.88
2.06
2.31
2.75
3.06
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
Part
No.
6GC61 12x12
6GC61 12x16
6GC61 16x16
6GC61 16x20
6GC61 20x20
6GC61 24x24
6GC61 32x32
H
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
B
Drop
1.25
1.38
1.38
1.38
1.50
1.70
2.25
Fabrication Equipment
Split Flange Kits
(Code 61)
A-Dia.
Inches
1.62
1.88
1.88
2.12
2.12
2.50
3.12
G
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
Adapters
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
F
Part
No.
6GC50 12x12
6GC50 16x16
6GC50 20x20
6GC50 24x24
6GC50 32x32
Reusables, Pushon, Acces.
B
Drop
1.25
1.30
1.50
1.75
2.25
Part
No.
6GC60 12x12
6GC60 12x16
6GC60 16x16
6GC60 16x20
6GC60 20x20
6GC60 24x24
6GC60 32x32
E
A-Dia.
Inches
1.50
1.75
2.00
2.38
2.81
A-Dia.
Inches
1.62
1.88
1.88
2.12
2.12
2.50
3.12
Refrigerant
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
Flange
Size
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
2”
D
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Hose
I.D.
3/4”
3/4”
1”
1”
1-1/4”
1-1/2”
2”
Thermoplastic
Part
No.
6GC47 12x12
6GC47 16x16
6GC47 20x20
6GC47 24x24
6GC47 32x32
C
A-Dia.
Inches
1.50
1.75
2.00
2.38
2.81
Grip Crimp
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
B
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Vari-Crimp
The 6GC Series Six Spiral Coupling is compatible with some
fixed and virtually all adjustable spiral crimp machines on the
market. Check crimp O.D. carefully.
Cross reference page J13.
Trivalent Zinc Plating
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-17
Bite to the Wire Hose Ends for 100R13 Spiral Hose (RC13 &
DHEXR13) 3/4” thru 2”, 100R15 Spiral Hose (RC15) 3/4”
thru 1-1/2”, & 4SH Spiral Hose 5/8”, 3/4”, and 1”.
No skive required.
The 6GC Series Six Spiral Coupling is compatible with some
fixed and virtually all adjustable spiral crimp machines on the
market. Check crimp O.D. carefully.
Cross reference page J13.
Trivalent Zinc Plating
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
A-Dia.
Inches
1.62
1.88
2.12
2.50
3.12
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
A-Dia.
Inches
1.62
1.88
2.12
2.50
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
A-Dia.
Inches
1.62
1.88
2.12
2.50
3.12
Part
No.
6GC80 12x12
6GC80 16x16
6GC80 20x20
6GC80 24x24
6GC80 32x32
B
Drop
1.25
1.40
1.50
1.75
B
Drop
2.50
3.00
3.38
4.00
5.50
Part
No.
6GC81 12x12
6GC81 16x16
6GC81 20x20
6GC81 24x24
Part
No.
6GC82 12x12
6GC82 16x16
6GC82 20x20
6GC82 24x24
6GC82 32x32
Split Flange Kits
(Extra Heavy)
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
A
2.00
2.25
2.63
3.12
3.81
B
.94
1.09
1.25
1.44
1.75
C
13/32
15/32
17/32
21/32
25/32
Complete
Kit No.
SFKHD-12
SFKHD-16
SFKHD-20
SFKHD-24
SFKHD-32
Couplamatic Systems Inc. Hydraulic Catalog 4010.
D-Ring
No.
D12
D16
D20
D24
D32
Hose
I.D.
3/4”
1”
BSPP
Size
3/4”
1”
Thread
Size
G-3/4-14
G-1-11
Hex
Size
1-1/8”
1-3/8”
Hose
I.D.
3/4”
1”
Tube
Size
25mm
30mm
Thread
Size
M36x2.0
M42x2.0
Hex
Size
1-3/8”
1-11/16”
Nut
Hex
1-1/4”
1-1/2”
Part
No.
6GC10 12x12
6GC10 16x16
Nut
Hex
1-7/8”
2”
Part
No.
6GC38 12x25
6GC38 16x30
Hose
Type
100R13
100R13
100R13
100R13
100R13
6GC Series No Skive
100R13 Crimp Chart
Hose
ID
3/4”
1”
1-1/4”
1-1/2”
2”
Crimp
OD
1.430
1.740
2.150
2.450
3.035
Hose
Type
100R15
100R15
100R15
100R15
6GC Series No Skive
100R15 Crimp Chart
Hose
ID
3/4”
1”
1-1/4”
1-1/2”
Crimp
OD
1.430
1.740
2.150
2.450
Hose
Type
4SH
4SH
4SH
6GC Series No Skive
4SH Crimp Chart
Hose
ID
5/8”
3/4”
1”
Crimp
OD
1.270
1.430
1.740
C-18
A
Bulk Hose
Bite to the Wire Hose Ends for 4SH Extreme Pressure Spiral
Hoses (1-1/4” thru 2” 4SH)
No skive required.
Tube
Size
1-1/4”
Thread
Size
1-11/16x12
A
Drop
1.25
Nut
Part
Hex
No.
1-7/8” XP31 20x20
Hose
I.D.
1-1/4”
Tube
Size
1-1/4”
Thread
Size
1-11/16x12
A
Drop
2.80
Nut
Part
Hex
No.
1-7/8” XP32 20x20
E
F
Reusables, Pushon, Acces.
Nut
Part
Hex
No.
2”
XP09 20x20
2-1/4” XP09 24x24
2-7/8” XP09 32x32
Hose
I.D.
1-1/4”
Refrigerant
Hex
Size
1-11/16”
2”
2-1/2”
Part
No.
XP01 20x20
XP01 24x24
XP01 32x32
Part
No.
XP30 20x20
D
Thread
Size
1-5/8x12
1-7/8x12
2-1/2x12
Hex
Size
1-11/16”
2”
2-1/2”
Nut
Hex
1-7/8”
Thermoplastic
Tube
Size
1-1/4”
1-1/2”
2”
Thread
Size
1 1/4-11 1/2
1 1/2-11 1/2
2-11 1/2
Thread
Size
1-11/16x12
C
Hose
I.D.
1-1/4”
1-1/2”
2”
Pipe
Size
1-1/4”
1-1/2”
2”
Tube
Size
1-1/4”
Grip Crimp
Hose
I.D.
1-1/4”
1-1/2”
2”
Hose
I.D.
1-1/4”
B
Trivalent Zinc Plating
Vari-Crimp
The XP Series Spiral Coupling is compatible with some fixed
and virtually all adjustable spiral crimp machines on the
market. Check crimp O.D. carefully.
Cross reference page J13.
Nut
Hex
2”
Part
No.
XP26 20x20
H
A
Drop
3.40
Fabrication Equipment
Thread
Size
1-5/8x12
G
Tube
Size
1-1/4”
Adapters
Hose
I.D.
1-1/4”
J
Cross Reference
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-19
Bite to the Wire Hose Ends for 4SH Extreme Pressure Spiral
Hoses (1-1/4” thru 2” 4SH)
No skive required.
The XP Series Spiral Coupling is compatible with some fixed
and virtually all adjustable spiral crimp machines on the
market. Check crimp O.D. carefully.
Cross reference page J13.
Trivalent Zinc Plating
Hose
I.D.
1-1/4”
1-1/2”
2”
Flange
Size
1-1/4”
1-1/2”
2”
A-Dia.
Inches
2.00
2.38
2.81
Part
No.
XP47 20x20
XP47 24x24
XP47 32x32
Hose
I.D.
1-1/4”
1-1/2”
2”
Flange
Size
1-1/4”
1-1/2”
2”
A-Dia.
Inches
2.00
2.38
2.81
B
Drop
1.50
1.75
2.25
Part
No.
XP50 20x20
XP50 24x24
XP50 32x32
Hose
I.D.
1-1/4”
1-1/2”
2”
Flange
Size
1-1/4”
1-1/2”
2”
A-Dia.
Inches
2.00
2.38
2.81
B
Drop
2.88
4.00
5.40
Part
No.
XP53 20x20
XP53 24x24
XP53 32x32
Split Flange Kits
(Code 61)
Flange
Size
1-1/4”
1-1/2”
2”
A
2.31
2.75
3.06
B
1.19
1.41
1.69
C
15/32
17/32
17/32
Complete O-Ring
Kit No.
No.
SFK-20
20252
SFK-24
24252
SFK-32
32252
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Hose
I.D.
1-1/4”
1-1/2”
2”
Flange
Size
1-1/4”
1-1/2”
2”
A-Dia.
Inches
2.12
2.50
3.12
Part
No.
XP60 20x20
XP60 24x24
XP60 32x32
Hose
I.D.
1-1/4”
1-1/2”
2”
Flange
Size
1-1/4”
1-1/2”
2”
A-Dia.
Inches
2.12
2.50
3.12
B
Drop
1.50
1.70
2.25
Part
No.
XP61 20x20
XP61 24x24
XP61 32x32
Hose
I.D.
1-1/4”
1-1/2”
2”
Flange
Size
1-1/4”
1-1/2”
2”
A-Dia.
Inches
2.12
2.50
3.12
B
Drop
3.25
3.75
5.38
Part
No.
XP62 20x20
XP62 24x24
XP62 32x32
Split Flange Kits
(Code 62)
Flange
Size
1-1/4”
1-1/2”
2”
C-20
A
2.63
3.12
3.81
B
1.25
1.44
1.75
C
17/32
21/32
25/32
Complete
Kit No.
SFK62-20
SFK62-24
SFK62-32
O-Ring
No.
20252
24252
32252
Part
No.
XP80 20x20
XP80 24x24
Hose
I.D.
1-1/4”
1-1/2”
Flange
Size
1-1/4”
1-1/2”
A-Dia.
Inches
2.12
2.50
B
Drop
1.50
1.75
Part
No.
XP81 20x20
XP81 24x24
Hose
I.D.
1-1/4”
1-1/2”
Flange
Size
1-1/4”
1-1/2”
A-Dia.
Inches
2.12
2.50
B
Drop
3.38
4.00
Part
No.
XP82 20x20
XP82 24x24
D
Thermoplastic
A-Dia.
Inches
2.12
2.50
C
Flange
Size
1-1/4”
1-1/2”
Crimp
OD
2.150
2.450
3.035
Grip Crimp
Hose
I.D.
1-1/4”
1-1/2”
Hose
Type
4SH
4SH
4SH
XP Series No Skive
4SH Crimp Chart
Hose
ID
1-1/4”
1-1/2”
2”
B
Trivalent Zinc Plating
Vari-Crimp
The XP Series Spiral Coupling is compatible with some fixed
and virtually all adjustable spiral crimp machines on the
market. Check crimp O.D. carefully.
Cross reference page J13.
A
No skive required.
Bulk Hose
Bite to the Wire Hose Ends for 4SH Extreme Pressure Spiral
Hoses (1-1/4” thru 2” 4SH)
E
Refrigerant
F
Reusables, Pushon, Acces.
G
Adapters
B
.94
1.09
1.25
1.44
1.75
C
13/32
15/32
17/32
21/32
25/32
Complete
Kit No.
SFKHD-12
SFKHD-16
SFKHD-20
SFKHD-24
SFKHD-32
D-Ring
No.
D12
D16
D20
D24
D32
J
Cross Reference
A
2.00
2.25
2.63
3.12
3.81
H
Flange
Size
3/4”
1”
1-1/4”
1-1/2”
2”
Fabrication Equipment
Split Flange Kits
(Extra Heavy)
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
C-21
Hydraulic hose ends for use with thermoplastic
hydraulic hose. 100R7 (H7, H7NC, H7TL, H7TLNC
and 100R8 (HS8, HS8NC). Coupling may be used in
Couplamatic Systems Inc., Synflex, and Parker Hannifin
Swage machines.
Thermoplastic Couplings may be swaged or crimped.
Cross reference page J14.
Not for use on reduced OD 100R7
Trivalent Zinc Plating
Hose
I.D.
1/8”
3/16”
3/16”
1/4”
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
3/4”
1”
Pipe
Part
Size
No.
1/8”
3-02102
1/8”
3-03102
1/4”
3-03104
1/8”
3-04102
1/4”
3-04104
3/8”
3-04106
1/4”
3-05104
3/8”
3-05106
1/4”
3-06104
3/8”
3-06106
1/2”
3-06108
3/8”
3-08106
1/2”
3-08108
3/4”
3-12112
1”
3-16116
Sewer Hose Coupling
3/4”
3H-12112
1”
3H-16116
Die
4540
302
303
303
304
304
304
305
305
306
306
306
308
308
312
316
Pusher
4599
MP023
MP001
MP004
MP002
MP004
MP005
MP004
MP005
MP005
MP005
MP009
MP008
MP009
MP011
MP013
Hose
I.D.
3/16”
1/4”
3/8”
1/2”
Pipe
Size
1/4”
1/4”
3/8”
1/2”
Part
No.
3-03144
3-04144
3-06146
3-08148
Die
4540
303
304
306
308
Pusher
4599
MP003
MP003
MP006
MP010
Hose
I.D.
3/16”
1/4”
3/8”
1/2”
Pipe
Size
1/4”
1/4”
3/8”
1/2”
Part
No.
3-03244
3-04244
3-06246
3-08248
Die
4540
303
304
306
308
Pusher
4599
FP002
FP002
FP004
FP018
MP011
MP013
Hose
I.D.
3/16”
1/4”
1/4”
1/4”
5/16”
3/8”
3/8”
1/2”
1/2”
Thread
Size
7/16-20
7/16-20
1/2-20
9/16-18
9/16-18
9/16-18
3/4-16
3/4-16
7/8-14
Tube
O.D.
1/4”
1/4”
5/16”
3/8”
3/8”
3/8”
1/2”
1/2”
5/8”
Part
No.
3-03504
3-04504
3-04505
3-04506
3-05506
3-06506
3-06508
3-08508
3-08510
Die
4540
303
304
304
304
305
306
306
308
308
Pusher
4599
MP001
MP002
MP002
MP005
MP004
MP005
MP007
MP008
MP009
Hose
I.D.
1/8”
3/16”
1/4”
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
1/2”
1/2”
3/4”
Thread
Size
7/16-20
7/16-20
7/16-20
1/2-20
9/16-18
1/2-20
9/16-18
9/16-18
3/4-16
3/4-16
7/8-14
1-1/16-12
Tube
O.D.
1/4”
1/4”
1/4”
5/16”
3/8”
5/16”
3/8”
3/8”
1/2”
1/2”
5/8”
3/4”
Part
No.
3-02544
3-03544
3-04544
3-04545
3-04546
3-05545
3-05546
3-06546
3-06548
3-08548
3-08550
3-12552
Die
4540
302
303
304
304
304
305
305
306
306
308
308
312
Pusher
4599
FP010
FP011
FP012
FP013
FP013
FP013
FP013
FP015
FP005
FP016
FP006
FP008
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
1/2”
Thread
Size
1/2-20
9/16-18
3/4-16
3/4-16
7/8-14
* Swivel for installation purposes only.
May leak at low pressure.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
D-1
Tube
O.D.
5/16”
3/8”
1/2”
1/2”
5/8”
Drop
Inches
0.53
0.59
0.71
0.71
0.84
Part
No.
3-04605
3-06606
3-06608
3-08608
3-08610
Die
4540
304
306
306
308
308
Pusher
4599
TP205
TP206
TP208
TP308
TP310
Bulk Hose
Cross reference page J14.
Vari-Crimp
B
Not for use on reduced OD 100R7
Trivalent Zinc Plating
A
Hydraulic hose ends for use with thermoplastic
hydraulic hose. 100R7 (H7, H7NC, H7TL, H7TLNC
and 100R8 (HS8, HS8NC). Coupling may be used in
Couplamatic Systems Inc., Synflex, and Parker Hannifin
Swage machines.
Thermoplastic Couplings may be swaged or crimped.
C
Grip Crimp
Pusher
4599
TP204
TP204
TP205
TP206
TP206
TP206
TP208
TP308
TP310
Hose
I.D.
1/4”
3/8”
3/8”
1/2”
Thread
Size
1/2-20
9/16-18
3/4-16
7/8-14
Tube
O.D.
5/16”
3/8”
1/2”
5/8”
Drop
Inches
1.77
2.18
2.50
2.75
Part
No.
3-04845
3-06846
3-06848
3-08850
Die
4540
304
306
306
308
Pusher
4599
TP205
TP206
TP208
TP310
Part
No.
3-04444
3-06446
Die
4540
304
306
Pusher
4599
TP204
TP206
Hose Thread
I.D. Size
1/4” 9/16-18
5/16” 11/16-16
3/8” 11/16-16
1/2” 13/16-16
Tube
O.D.
1/4”
3/8”
3/8”
1/2”
Drop
Inches
0.78
0.90
0.90
1.15
Part
No.
3-04474
3-05476
3-06476
3-08478
Die
4540
304
305
306
308
Pusher
4599
TP204
TP206
TP206
TP30
Hose Thread
I.D. Size
3/8” 5/8-18
Tube Drop Part
Die
O.D. Inches No.
4540
3/8” 0.97 3-06C46 306
Pusher
4599
TP206
Tube
O.D.
1/4”
3/8”
3/8”
1/2”
Part
No.
3-04404
3-05406
3-06406
3-08408
Die
4540
304
305
306
308
Pusher
4599
MP045
MP037
MP037
MP046
D-2
K
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Thread Identification
Thread
Size
9/16-18
11/16-16
11/16-16
13/16-16
Crimp O.D.
.365
.500
.555
.630
.675
.830
1.080
1.340
J
Hose
I.D.
1/4”
5/16”
3/8”
1/2”
I.D.
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
3/4”
1”
Cross Reference
100R7, REDUCED OD 100R8, & 100R18 (H7, H7NC, H7TL, H7TLNC, HS8, HS8NC, & R18)
Dash Size
-2
-3
-4
-5
-6
-8
-12
-16
H
Hose Thread
Tube Drop Part
Die
Pusher
I.D. Size
O.D. Inches No.
4540
4599
3/8” 5/8-18
3/8” 1.66 3-06C76 306
TP206
THERMOPLASTIC CRIMP DIAMETER CHART
Fabrication Equipment
Pusher
4599
FP014
Drop
Inches
.40
.44
G
Tube Part Die
O.D. No.
4540
3/8” 3-06A06 306
Tube
O.D.
1/4”
3/8”
Adapters
Hose Thread
I.D. Size
3/8” 5/8-18
Hose Thread
I.D. Size
1/4” 9/16-18
3/8” 11/16-16
F
Die
4540
303
304
304
304
305
306
306
308
308
Reusables, Pushon, Acces.
Part
No.
3-03644
3-04644
3-04645
3-04646
3-05646
3-06646
3-06648
3-08648
3-08650
E
Drop
Inches
0.81
0.81
0.83
0.91
0.91
0.91
1.15
1.15
1.23
Refrigerant
Tube
O.D.
1/4”
1/4”
5/16”
3/8”
3/8”
3/8”
1/2”
1/2”
5/8”
D
Thread
Size
7/16-20
7/16-20
1/2-20
9/16-18
9/16-18
9/16-18
3/4-16
3/4-16
7/8-14
Thermoplastic
Hose
I.D.
3/16”
1/4”
1/4”
1/4”
5/16”
3/8”
3/8”
1/2”
1/2”
Refrigerant Hose Ends are for use with Refrigerant hose (F204), and are compatible with both R-12 and R-134A refrigerants. Refrigerant fittings should be
applied with a “bubble crimp” to pass new coupling integrity performance
requirements. BL series has steel nut and ferrule, and an aluminum tube. SB
series has steel nut, tube, and ferrule.See page H2 for crimpers, dies, and die
carriers. See page A16 for Refrigerant Hose (No. F204).
**Minimum order of 5 pcs. per part # on all refrigerant fittings.**
Hose
I.D.
5/16” (#6)
13/32” (#8)
1/2” (#10)
5/8” (#12)
1/2” (#10)
Thread
Size
5/8-18
3/4-16
7/8-14
1-1/16-14
3/4-16
Tube
O.D.
3/8
1/2
5/8
3/4
1/2
Part
No.
BL1301
BL1302
BL1303
BL1304
BL1306
Hose
Thread
I.D.
Size
5/16”(#6) 5/8-18
13/32”(#8) 3/4-16
1/2” (#10) 7/8-14
Tube
O.D.
3/8
1/2
5/8
Drop
A (In.)
.56
.63
.88
Part
No.
BL1311-1
BL1312-1
BL1313-1
Hose
Thread
I.D.
Size
5/16”(#6) 5/8-18
13/32”(#8) 3/4-16
1/2”(#10) 7/8-14
5/8”(#12) 7/8-14
Female O-Ring
With R12 Service Port
Hose
I.D.
5/16”(#6)
13/32”(#8)
1/2” (#10)
Thread
Size
5/8-18
3/4-16
7/8-14
Tube
O.D.
3/8
1/2
5/8
Part
No.
BL1301-1
BL1302-1
BL1303-1
Hose
I.D.
5/16” (#6)
13/32” (#8)
1/2” (#10)
Thread
Size
5/8-18
3/4-16
7/8-14
Tube
O.D.
3/8
1/2
5/8
Part
No.
BL1301-3
BL1302-3
BL1303-3
Hose
Thread
I.D.
Size
5/16”(#6) 5/8-18
13/32”(#8) 3/4-16
1/2” (#10) 7/8-14
5/8” (#12) 1-1/16-14
Tube
O.D.
3/8
1/2
5/8
3/4
Drop
A (In.)
.56
.63
.88
.94
Part
No.
BL1311
BL1312
BL1313
BL1314
Tube
O.D.
3/8
1/2
5/8
5/8
Drop
A (In.)
1.12
1.31
1.50
1.75
Part
No.
BL1321-3
BL1322-3
BL1323-3
BL1327-3
Thread
Size
5/8-18
3/4-18
7/8-18
1-1/16-16
Tube
O.D.
3/8
1/2
5/8
3/4
Part
No.
BL1401
BL1402
BL1403
BL1404
Hose
Thread
I.D.
Size
5/16”(#6) 5/8-18
13/32”(#8) 3/4-16
1/2” (#10) 7/8-14
Tube
O.D.
3/8
1/2
5/8
Drop
A (In.)
.56
.63
.88
Part
No.
BL1311-3
BL1312-3
Hose
BL1313-3
I.D.
5/16” (#6)
13/32” (#8)
1/2” (#10)
5/8” (#12)
Hose
Thread
I.D.
Size
5/16”(#6) 5/8-18
13/32”(#8) 3/4-16
1/2”(#10) 7/8-14
5/8”(#12) 1-1/16-12
5/8”(#12) 7/8-14
Tube
O.D.
3/8
1/2
5/8
3/4
5/8
Drop
A (In.)
1.12
1.31
1.50
1.75
1.75
Part
No.
BL1321
BL1322
BL1323
BL1324
BL1327
Hose
Thread
I.D.
Size
5/16”(#6) 5/8-18
13/32”(#8) 3/4-18
1/2”(#10) 7/8-18
5/8”(#12) 1-1/16-16
Tube
O.D.
3/8
1/2
5/8
3/4
Drop
A (In.)
.88
1.00
1.06
1.19
Part
No.
BL1411
BL1412
BL1413
BL1414
Drop
A (In.)
1.12
1.31
1.50
1.75
Hose
Thread
I.D.
Size
5/16”(#6) 5/8-18
Part
13/32”(#8) 3/4-18
No.
1/2” (#10) 7/8-18
BL1321-1
5/8” (#12) 1-1/16-16
BL1322-1
BL1323-1
BL1327-1
Tube
O.D.
3/8
1/2
5/8
3/4
Drop
A (In.)
1.63
1.88
2.12
2.25
Part
No.
BL1421
BL1422
BL1423
BL1424
Hose
Thread
I.D.
Size
5/16”(#6) 5/8-18
13/32”(#8) 3/4-16
1/2”(#10) 7/8-14
5/8”(#12) 7/8-14
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Tube
O.D.
3/8
1/2
5/8
5/8
E-1
Hose
I.D.
5/16” (#6)
5/16” (#6)
1/2” (#10)
1/2” (#10)
5/8” (#12)
Thread
Size
9/16-18 (M14)
M16-1.5
M22-1.5
M24-2.0
M27-2.0
Tube
O.D.
3/8
M16
M22
M24
M27
Part
No.
BL9301
BL9302
BL9306
BL9307
BL9308
Hose
I.D.
5/16” (#6)
13/32” (#8)
1/2” (#10)
5/8” (#12)
Part
No.
BL6101-3
BL6102-3
BL6103-3
BL6104-3
D
Part
No.
BL6101
BL6102
BL6103
BL6104
Thermoplastic
Hose
I.D.
5/16” (#6)
13/32” (#8)
1/2” (#10)
5/8” (#12)
C
Part
No.
BL1101
BL1102
BL1103
BL1104
BL1106
BL1108
Grip Crimp
Tube
O.D.
3/8
1/2
5/8
3/4
1/2
1/2
B
Thread
Size
5/8-18
3/4-16
7/8-14
1-1/16-14
3/4-16
3/4-16
Vari-Crimp
Hose
I.D.
5/16”(#6)
13/32”(#8)
1/2” (#10)
5/8” (#12)
1/2” (#10)
5/16” (#6)
A
**Minimum order of 5 pcs. per part # on all refrigerant fittings.**
Bulk Hose
Refrigerant Hose Ends are for use with Refrigerant hose (F204), and are compatible with both R-12 and R-134A refrigerants. Refrigerant fittings should be
applied with a “bubble crimp” to pass new coupling integrity performance
requirements. BL series has steel nut and ferrule, and an aluminum tube. SB
series has steel nut, tube, and ferrule.See page H2 for crimpers, dies, and die
carriers. See page A16 for Refrigerant Hose (No. F204).
Part
No.
BL1121
BL1122
BL1123
BL1124
Hose
I.D.
5/16” (#6)
13/32”(#8)
1/2” (#10)
Thread
Size
5/8-18
3/4-16
7/8-14
Tube
Dia.
8.0
12.0
14.5
Part
No.
SB3001
SB3002
SB3003
Hose
I.D.
5/16” (#6)
13/32” (#8)
1/2” (#10)
5/8” (#12)
1/2” (#10)
5/8” (#12)
5/16” (#6)
Thread
Size
5/8-18
3/4-16
7/8-14
1-1/16-14
3/4-16
7/8-14
3/4-16
Tube
Dia.
3/8
1/2
5/8
3/4
1/2
5/8
1/2
Part
No.
SB2901
SB2902
SB2903
SB2904
SB2906
SB2907
SB2908
Hose
I.D.
5/16” (#6)
13/32” (#8)
1/2” (#10)
5/8” (#12)
5/8” (#12)
5/16” (#6)
13/32” (#8)
1/2” (#10)
5/8” (#12)
5/8” (#12)
Tube
Size
3/8”
1/2”
5/8”
3/4”
5/8”
3/8”
1/2”
5/8”
3/4”
5/8”
Tube
Style
Alum
Alum
Alum
Alum
Alum
Steel
Steel
Steel
Steel
Steel
Tube
Size
3/8”
1/2”
5/8”
3/4”
Compatible with R12 and R134a.
Part
No.
BL6601
BL6602
BL6603
BL6604
BL6605
SB6601
SB6602
SB6603
SB6604
SB6605
Part
No.
4041
4042
4043
4044
J
Cross Reference
Part
No.
BL1821
BL1822
BL1823
Part
No.
BL9321
BL9322
BL9326
BL9327
BL9328
H
Drop
A (In.)
1.50
1.75
2.00
Drop
A (In.)
1.12
1.12
1.50
1.50
1.75
Fabrication Equipment
Part
No.
BL1801
BL1802
BL1803
BL1804
Tube
O.D.
3/8
M16
M22
M24
M27
G
Tube
O.D.
3/8
1/2
5/8
3/4
Thread
Size
9/16-18
M16-1.5
M22-1.5
M24-2.0
M27-2.0
Adapters
Thread
Size
5/8-18
3/4-16
7/8-14
1-1/16-14
Drop
A (In.)
1.06
1.25
1.50
1.50
Hose
I.D.
5/16” (#6)
5/16” (#6)
1/2” (#10)
1/2” (#10)
5/8” (#12)
F
Hose
I.D.
5/16” (#6)
13/32” (#8)
1/2” (#10)
5/8” (#12)
Tube
O.D.
3/8
1/2
5/8
3/4
Part
No.
BL1111
BL1112
BL1113
BL1114
Reusables, Pushon, Acces.
Thread
Size
5/8-18
)3/4-16
7/8-14
1-1/16-14
Drop
A (In.)
.56
.63
.88
1.00
E
Hose
I.D.
5/16”(#6)
13/32”(#8
1/2”(#10)
5/8”(#12)
Tube
O.D.
3/8
1/2
5/8
3/4
Refrigerant
Hose
Thread
I.D.
Size
5/16”(#6) 5/8-18
13/32”(#8) 3/4-16
1/2”(#10) 7/8-14
5/8”(#12) 1-1/16-14
Tube
O.D.
3/8
1/2
5/8
See pg. A16 for
Refrigerant Hose
(No. F204)
Hose
Thread
I.D.
Size
13/32”(#8) 3/4-16
Tube
Dia.
1/2
Drop
A (in.)
1.06
Part
No.
SB2922
See pg H2 for crimper.
K
Thread Identification
Hose
Thread
I.D.
Size
5/16”(#6) 5/8-18
13/32”(#8) 3/4-16
1/2”(#10) 7/8-14
Couplamatic Systems Inc. Hydraulic Catalog 4010.
E-2
Two Bolt Reusable Couplings. Hose ends for Hose ends for 100R1 Thin Cover (57MB-1)
and 100R2 Thin Cover (57MB-2)
general purpose, hydraulic, air, and steam.
(No extreme pressures. 100R1 Pressure Max.) (Non-Mandrel and No Skive.)
Hose
I.D.
3/8”
5/8”
3/4”
1”
1-1/4”
2”
Pipe
Size
3/8”
3/4”
3/4”
1”
1-1/4”
2”
Hose
I.D.
3/8”
Thread
Size
3/4x16
Hose I.D.
5/8”
3/4”
Clamp Size
3/8”
5/8”
3/4”
1”
Thread
Size
3/8-18
3/4-14
3/4-14
1-11-1/2
1-1/4-11-1/2
2-11-1/2
Tube
O.D.
1/2”
Part
No.
604C
1004C
1204C
1601C
2001C
3201C
Part
No.
640C
Part No.
1004MC
1204MC
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Pipe
Size
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
1”
Thread Hose
Size
Type
1/4-18 100R1Thin
1/4-18 100R2Thin
3/8-18 100R1Thin
3/8-18 100R2Thin
1/2-14 100R1Thin
1/2-14 100R2Thin
3/4-14 100R2Thin
1-11-1/2 100R2Thin
Part
No.
403R-1
403R-2
603R-1
603R-2
803R-1
803R-2
1203R-2
1600R-2
Hose
I.D.
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
Thread
Size
9/16x18
9/16x18
3/4x16
3/4x16
7/8x14
7/8x14
Tube
O.D.
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
Part
No.
618R-1
618R-2
815R-1
815R-2
818R-1
818R-2
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
3/4”
1”
Part No.
3/8CH
5/8CH
3/4CH
1CH
Thread
Size
7/16x20
7/16x20
9/16x18
9/16x18
3/4x16
3/4x16
3/4x16
3/4x16
7/8x14
7/8x14
1-1/16x12
1-5/16x12
Tube
O.D.
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
3/4”
1”
Hose
Type
100R1Thin
100R2Thin
100R1Thin
100R2Thin
100R1Thin
100R2Thin
Hose
Type
100R1Thin
100R2Thin
100R1Thin
100R2Thin
100R1Thin
100R2Thin
100R1Thin
100R2Thin
100R1Thin
100R2Thin
100R2Thin
100R2Thin
Part
No.
424R-1
424R-2
627R-1
627R-2
630R-1
630R-2
824R-1
824R-2
827R-1
827R-2
1221R-2
1618R-2
Assembly Instructions.
Hose ends for 100R5 Cotton Cover (58MBA)
(Non-Mandrel)
Hose
I.D.
3/16” (#4)
3/16” (#4)
1/4” (#5)
5/16” (#6)
5/16” (#6)
13/32” (#8 )
13/32” (#8)
1/2” (#10)
5/8” (#12)
Pipe
Size
1/8”
1/4”
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
Hose
I.D.
Thread
Size
1/8-27
1/4-18
1/4-18
1/4-18
3/8-18
3/8-18
1/2-14
1/2-14
3/4-14
3/16” (#4)
1/4” (#5)
5/16” (#6)
13/32” (#8)
Thread Tube
Size
O.D.
JIC 37 FLARE
7/16-20 1/4”
1/2-20
5/16”
9/16-18 3/8”
3/4-16
1/2”
5/16” (#6)
SAE 45 FLARE
5/8-18
3/8”
Part
No.
4R5-2MP
4R5-4MP
5R5-4MP
6R5-4MP
6R5-6MP
8R5-6MP
8R5-8MP
10R5-8MP
12R5-12MP
Part
No.
4R5-4MJ
5R5-5MJ
6R5-6MJ
8R5-8MJ
6R5-6MS
Hose
I.D.
3/16” (#4)
1/4” (#5)
5/16” (#6)
13/32” (#8)
1/2” (#10)
5/8” (#12)
7/8” (#16)
1-1/8” (#20)
Thread
Size
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1-1/16-12
1-5/16-12
1-5/8-12
Tube
O.D.
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
Part
No.
4R5-4FJ
5R5-5FJ
6R5-6FJ
8R5-8FJ
10R5-10FJ
12R5-12FJ
16R5-16FJ
20R5-20FJ
Hose
I.D.
5/16” (#6)
Thread
Size
5/8-18
Tube
O.D.
3/8”
Part
No.
6R5-6FS
Reusable Hose Ends:
Hose
I.D.
Thread Part Hose Thread Part
Size-Type No. I.D. Size-Type No.
3/8”
5/8”
3/8”-IPT 604DC 3/4” 3/4”-IPT
3/4”-IPT 1004DC 1”
1”-IPT
1/2” Mender
5/8” Mender
3/4” Mender
1204DC
1601DC
800MT
1000MT
1200MT
1.
2.
Screw socket onto hose (left hand thread)
until hose bottoms. Back out 1/4 turn.
Lubricate insert threads and I.D. of hose.
Screw insert into socket until insert hex
touches socket.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Hose
I.D.
3/16” (#4)
5/16” (#6)
5/16” (#6)
13/32” (#8)
Thread Tube
Size
O.D.
7/16-20
1/4”
9/16-18
3/8”
5/8-18
3/8”
3/4-16
1/2”
* - JIC Thread Only
** - SAE Thread Only
F-1
Drop
Inches
.690
.840
.840
1.090
Part
No.
4R5-4FJ90*
6R5-6FJ90*
6R5-6FS90**
8R5-8FJ90*
A
Bulk Hose
Push on fittings for rubber cover push on hose (025H & 024H) and cotton cover push on hose (026H)
No clamps needed for installation. Minimum 10 piece order per part number.
B
Vari-Crimp
Hose
I.D.
1/4”
1/4”
3/8”
Thread
Size
7/16-20
1/2-20
5/8-18
Part
No.
PR407
PR408
PR610
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
1/2”
Thread
Size
3/8-24
7/16-24
1/2-20
1/2-20
5/8-18
3/4-18
7/8-18
Part
No.
P406
P407
P408
P608
P610
P812
P1014
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
1/2”
1/2”
5/8”
3/4”
Thread
Size
7/16-20
1/2-20
5/8-18
5/8-18
3/4-16
7/8-14
7/8-14
1-1/16-14
Part
No.
PS407
PS408
PS410
PS610
PS812
PS814
PS1014
PS1218
D
Hose
I.D.
1/4”
1/4”
1/4”
3/8”
3/8”
1/2”
5/8”
Thermoplastic
Part
No.
P402
P404
P602
P603
P604
P804
P1004
P1006
P1206
C
Pipe
Size
1/8”
1/4”
1/4”
3/8”
1/2”
1/2”
1/2”
3/4”
3/4”
Grip Crimp
Hose
I.D.
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
5/8”
5/8”
3/4”
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
Part
No.
PM404
PM606
PM808
PM1010
PM1212
E
Part
No.
PF406
PF407
PF408
PF610
PF812
Refrigerant
Thread
Size
3/8-24
7/16-24
1/2-20
5/8-18
3/4-18
F
Reusables, Pushon, Acces.
G
Adapters
H
Fabrication Equipment
Custom Hydrualic Hose Assemblies available. Call for Quote. Minimum Quantity will apply.
Single Wire Braid
3,000 Lbs. Working Pressure
Length
6”
8”
12”
15”
18”
Part No.
W24
W30
W36
W48
W60
Length
24”
30”
36”
48”
60”
Couplamatic Systems Inc. Hydraulic Catalog 4010.
F-2
K
Other Lengths Available Upon Request.
Thread Identification
1/8” Male NPTF
J
3/16” I.D.
Cross Reference
Grease Hose Assemblies.
Part No.
W06
W08
W12
W15
W18
Suction & Return
Line COUPLIN GS
Round Wire Spring Guards:
Hose ends for 100R4 Suction (104MB) and
Return (3284H) hose.
Protection for hose from abrasion, kinking, and extreme physical abuse.
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Pipe
Size
3/4”
1”
1-1/4”
1-1/2”
2”
Thread
Size
3/4-14
1-11-1/2
1-1/4-11-1/2
1-1/2-11-1/2
2-11-1/2
Part
No.
1204HS
1601HS
2001HS
2401HS
3201HS
Part No.
SG550
SG610
SG650
SG750
SG835
SG900
SG990
SG1055
SG1240
SG1300
SG1630
SG2125
Wire Size
.063
.063
.080
.080
.080
.080
.080
.080
.080
.080
.120
.120
Coil I.D.
.550”
.610”
.650”
.750”
.835”
.900”
.990”
1.055”
1.240”
1.300”
1.630”
2.125”
Pitch
.188
.188
.188
.188
.188
.188
.188
.188
.250
.375
.375
.375
Length
20 Feet
20 Feet
20 Feet
20 Feet
20 Feet
20 Feet
20 Feet
20 Feet
20 Feet
20 Feet
20 Feet
20 Feet
Sold only in 20 Ft. lengths.
Spring Guard Recommendation by Hose Type:
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Thread
Size
1-1/16x12
1-5/16x12
1-5/8x12
1-7/8x12
2-1/2x12
Tube
O.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Part
No.
1222HS
1619HS
2006HS
2407HS
3205HS
Hose
I.D.
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
100R1 Std.
54MB-1
SG650
SG835
SG990
---SG1240
SG1630
SG2125
100R2 Std.
54MB-2
SG750
SG900
SG990
---SG1300
SG1630
SG2125
100R1 Thin
57MB-1
SG550
SG750
SG835
SG990
SG1240
SG1630
SG2125
100R2 Thin Hy-Plus I Hy-Plus II
57MB-2
HPI
HPII
SG610
------SG750
SG750
---SG900
SG835
---SG1055
------SG1240
---SG1240
SG1630
---SG1630
SG2125
---SG2125
100R3
3319A
SG610
SG750
SG990
---SG1300
SG1630
SG2125
100R4 100R12
104MB SP580
---------------SG990
------SG1300 SG1240
SG1630 SG1630
SG2125 SG2125
Note: When cutting spring guard, remove all sharp edges before installing on hose!
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Ferrule
Length
1.01”
1.07”
1.52”
1.56”
2.00”
Ferrule
O.D.
1.50”
1.75”
2.00”
2.25”
2.75”
Part
No.
12FHS
16FHS
20FHS
24FHS
32FHS
Stems can be banded or clamped.
Recommended Crimp Diameters:
Hose
I.D.
3/4”
1”
1-1/4”
1-1/2”
2”
Hose
O.D.
1.25”
1.50”
1.77”
2.08”
2.50”
Crimp
O.D.
1.290”
1.530”
1.815”
2.050”
2.440”
Note: 3/4” thru 2” hydraulic suction hose
can also be crimped using standard
Grip-Crimp couplings. 3/4” thru 1-1/4” can
be crimped with standard Vari-Crimp
couplings.
Factory Formed Hose Guard: Jack Hose Spring
Part No.
Coil I.D. Length
Guards and Warning
SG21
.650
8 Inches
SG27
.810
7 Inches
Labels:
Maximum protection against kinking near the hose
fittings. Widely used in applications such as the car
wash industry. Fits most 1/4” and 3/8” I.D. hose.
Measure hose O.D. for proper fit. Close wound on one
end for extra protection and a non-slipping fit.
Bin Label s:
These labels are printed on self-adhesive stock for
quick application. Each label contains an illustration of
the part along with the part number and description.
Label sets are available for all coupling series.
Pressure Wash Grips:
Part No.
PW Grip-4
PW Grip-6
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Part No. Hose Coil I.D. Length
SGJH675 1/4” 0.675
6 Inches
SGJH870 3/8” 0.870
5.5 Inches
Jackhose High Pressure Warning
Label:
Part # JH Tag
Steel Storage Bin
HH15 bin has 72 openings for
storage of couplings and adapters.
Bins are 4” wide x 4-1/2” High
x 12” Deep with lip.
Hose ID
1/4”
3/8”
F-3
Counter Mats, Window Stickers, and Banners
are also available!!
A
Bulk Hose
B
Vari-Crimp
1503 6x8
1503 8x6
1503 8X8
3/8
3/8
1/2
1/2
3/8
1/2
3/8
1/2
1/2
1/2
3/4
3/4
3/4
1
1
1-1/4
1-1/2
2
1/2 1501 8x8-.062**
3/4
1501 8x12
1/2
1501 12x8
3/4
1501 12x12
1
1501 12x16
3/4
1501 16x12
1
1501 16x16
1-1/4
1501 20x20
1-1/2
1501 24x24
2
1501 32x32
Male
Pipe
1
1/4
3/8
1/2
1/2
3/4
Female
NPSM
2
1/4
3/8
3/8
1/2
3/4
Male
Pipe
1
3/8
1/2
1/2
1/2
3/4
3/4
1
1
1-1/4
1-1/2
Female
Pipe
2
1/4
1/8
1/4
3/8
3/8
1/2
1/2
3/4
1
1-1/4
1/2
3/4
1503 12x8
1503 12x12
1
1
1-1/4
1-1/2
2
3/4
1
1-1/4
1-1/2
2
1503 16x12
1503 16x16
1503 20x20
1503 24x24
1503 32x32
Male
Pipe
1
1/4
3/8
1/2
Female
Pipe
2
1/4
3/8
1/2
Male
Pipe
1
1/4
3/8
1/2
3/4
Female
NPSM
2-3
1/4
3/8
1/2
3/4
Female
NPSM
2
1/4
3/8
1/4
3/8
1405 4x4
1405 4x6
1405 6x4
1405 6x6
1/4
1/4
3/8
3/8
1/4
3/8
1/4
3/8
1502 4x4
1502 4x6
1502 6x4
1502 6x6
1501 6x6-.062**
1501 6x8
3/8
1501 8x6
1/2
1501 8x8
1/2
1/2
3/8
1/2
1405 6x8
1405 8x6
1405 8x8
3/8
1/2
1/2
1/2
3/8
1/2
1502 6x8
1502 8x6
1502 8x8
1/2
3/4
3/4
3/4
1/2
3/4
1405 8x12
1405 12x8
1405 12x12
1/2
3/4
3/4
3/4
1/2
3/4
1502 8x12
1502 12x8
1502 12x12
1
1
1-1/4
1-1/2
2
3/4
1
1-1/4
1-1/2
2
1405 16x12
1405 16x16
1405 20x20
1405 24x24
1405 32x32
1
1-1/4
1-1/2
2
1
1-1/4
1-1/2
2
1502 16x16
1502 20x20
1502 24x24
1502 32x32
Male
Pipe
1
1/8
1/4
3/8
1/2
1/2
1/2
3/4
1
1-1/4
Male
Pipe
2
1/8
1/4
3/8
1/4
3/8
1/2
3/4
1
1-1/4
CSI #
F
3/4
3/4
Female
Pipe
1
Reusables, Pushon, Acces.
1/2
3/8
1/2
1/4
1/4
3/8
3/8
CSI #
E
3/8
1/2
1/2
1405 2x2
1501 2x2
1501 2x4
1501 4x2
1501 4x4
1501 4x6
1501 6x4
1501 6x6
Female
Pipe
1
1/8
Refrigerant
1503 4x4
1503 4x6
1503 6x4
1503 6x6
Female
NPSM
2
1/8
CSI #
D
1/4
3/8
1/4
3/8
CSI #
Thermoplastic
1/4
1/4
3/8
3/8
Male
Pipe
1
1/8
C
1503 2x2
Male
Pipe
1
1/8
1/8
1/4
1/4
1/4
3/8
3/8
Female
NPSM
CSI #
2
1/8
1404 2x2
1/4
1404 2x4
1/8
1404 4x2
1/4
1404 4x4
3/8
1404 4x6
1/4
1404 6x4
3/8
1404 6x6
3/8 1404 6x6-.031*
3/8 1404 6x6-.062**
1/2
1404 6x8
3/8
1404 8x6
1/2
1404 8x8
1/2 1404 8x8-.031*
1/2 1404 8x8-.062**
3/4
1404 8x12
1/2
1404 12x8
3/4
1404 12x12
1
1404 12x16
3/4
1404 16x12
1
1404 16x16
1-1/4
1404 20x20
1-1/2
1404 24x24
2
1404 32x32
Grip Crimp
Female
NPSM
2
1/8
1/4
1/8
1/4
3/8
1/4
3/8
Female
NPSM
2
1/8
Male
Pipe
1
1/8
1/8
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
1
1
1-1/4
1-1/2
2
CSI #
CSI #
5502 4x4
5502 4x6
5502 6x4
5502 6x6
5502 6x8
5502 8x6
5502 8x8
CSI #
5404 2x2
5404 4x4
5404 6x6
5404 8x4
5404 8x6
5404 8x8
5404 12x12
5404 16x16
5404 20x20
Female
Pipe
1
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
Female
Pipe
2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
CSI #
5000 4x4
5000 6x4
5000 6x6
5000 8x6
5000 8x8
5000 12x8
5000 12x12
5000 16x16
H
Fabrication Equipment
Female
Pipe
2
1/4
3/8
1/4
3/8
1/2
3/8
1/2
G
5503 4x4
5503 6x6
5503 8x8
Male
Pipe
1
1/4
1/4
3/8
3/8
3/8
1/2
1/2
Adapters
1501-L 4x4
1501-L 6x6
1501-L 8x6
1501-L 8x8
1501-L 12x12
CSI #
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Female
NPSM
2-3
1/4
3/8
1/2
3/4
CSI #
1603 4x4x4
1603 6x6x6
1603 8x8x8
1603 12x12x12
Other orifice sizes available in minimum quantity of 200 pieces.
G-1
Male Pipe
1
CSI#
1/4
3/8
1/2
3/4
1
5406 P4
5406 P6
5406 P8
5406 P12
5406 P16
K
** Restricted to 1/16” orifice.
Female
NPSM
1
1/4
1602 4x4x4
1602 6x6x6
3/8
1/2
1602 8x8x8
1602 12x12x12 3/4
CSI #
Thread Identification
* Restricted to 1/32” orifice.
Female
NPSM
2-3
1/4
3/8
1/2
3/4
J
5406 6x4
5406 8x2
5406 8x4
5406 8x6
5406 12x6
5406 12x8
5406 16x8
5406 16x12
5406 20x16
5406 24x20
Female
Pipe
1
1/4
1601 4x4x4
3/8
1601 6x6x6
1/2
1601 8x8x8
1601 12x12x12 3/4
CSI #
Cross Reference
CSI #
Male
Thread
Pipe
Size
1
2
1/8
7/16-20
1/4
7/16-20
1/2-20
1/8
1/2-20
1/4
9/16-18
1/4
3/8
9/16-18
9/16-18
1/2
3/4-16
3/8
1/2
3/4-16
3/4
3/4-16
7/8-14
3/8
7/8-14
1/2
1-1/16-12 1/2
1-1/16-12 3/4
1-1/16-12 1
1-5/16-12 3/4
1-5/16-12 1
1-5/8-12
1-1/4
1-7/8-12
1-1/2
2-1/2-12
2
CSI #
2404 4x2
2404 4x4
2404 5x2
2404 5x4
2404 6x4
2404 6x6
2404 6x8
2404 8x6
2404 8x8
2404 8x12
2404 10x6
2404 10x8
2404 12x8
2404 12x12
2404 12x16
2404 16x12
2404 16x16
2404 20x20
2404 24x24
2404 32x32
Thread
Size
1
7/16-20
9/16-18
3/4-16
Thread
Size
2
7/16-20
9/16-18
3/4-16
Thread
Size
1
Thread
Size
2
9/16-18
3/4-16
7/8-14
1-1/16-12
Thread
Size
1
7/16-20
9/16-18
3/4-16
3/4-16
7/8-14
CSI #
2700 4x4
2700 6x6
2700 8x8
Thread
Size
1
3/8
2503 6x6
3/4-16
3/4-16
3/8
1/2
2503 8x6
2503 8x8
7/8-14
1/2
2503 10x8
Thread
Thread
Size
Size
1
2
7/16-20
7/16-20
9/16-18
9/16-18
3/4-16
3/4-16
7/8-14
7/8-14
1-1/16-12 1-1/16-12
CSI #
CSI #
6801 4x4-NWO
6801 6x6-NWO
6801 8x8-NWO
6801 8x10-NWO
6801 10x8-NWO
CSI #
9/16-18
Male
Pipe
1
3/8
9/16-18 6500 6x6
3/8
3/4-16
6500 8x8
1/2
7/8-14
6500 10x10 1/2
1-1/16-12 6500 12x12 3/4
1
Male
ORB
2
7/16-20
9/16-18
3/4-16
7/8-14
3/4-16
Male
Pipe
2
Male
ORB
1
7/16-20
9/16-18
9/16-18
3/4-16
1-1/16-12 1-1/16-12 6801 12x12-NWO 3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1-1/16-12
1-1/16-12
1-5/16-12
1-5/16-12
Thread
Size
2
9/16-18
3/4-16
3/4-16
7/8-14
1-1/16-12
1-5/16-12
Female
NPSM
2
1/4
1/4
3/8
1/4
3/8
1/2
3/4
1/2
3/4
1/2
3/4
3/4
1
CSI #
2701 4x4
2701 6x6
2701 8x8
2701 10x10
2701 12x12
Thread
Size
1
Male
Pipe
2
CSI #
7/16-20
1/4
2501 4x4
9/16-18
9/16-18
3/4-16
3/4-16
3/4-16
3/8
1/2
3/8
1/2
3/4
2501 6x6
2501 6x8
2501 8x6
2501 8x8
2501 8x12
7/8-14
1-1/16-12
1/2
3/4
2501 10x8
2501 12x12
Thread
Size
1
7/16-20
9/16-18
3/4-16
7/8-14
1-1/16-12
Female
Pipe
1
3/8
6505 6x6
1/2
6505 6x8
1/2
6505 8x8
6505 8x10 1/2
6505 12x12 3/4
6505 16x16 1
CSI #
CSI #
6900 4x4-O
6900 6x4-O
6900 6x6-O
6900 8x4-O
6900 8x6-O
6900 8x8-O
6900 8x12 -O
6900 10x8-O
6900 10x12-O
6900 12x8-O
6900 12x12-O
6900 16x12-O
6900 16x16-O
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Male
ORB
1
CSI #
306 4
306 6
306 8
306 10
306 12
Thread
Size
2
3/4-16
9/16-18
3/4-16
7/8-14
1-1/16-12
1-5/16-12
6506 6x8
6506 8x6
6506 8x8
6506 8x10
6506 12x12
6506 16x16
1/4
1/4
3/8
3/4-16
3/4-16
3/8
1/2
1/2
1-1/16-12 1/2
1-1/16-12 3/4
Thread
Size
2
7/16-20
1/2-20
9/16-18
2403 4x4
2403 5x5
2403 6x6
3/4-16
3/4-16
2403 8x8
7/8-14
1-1/16-12
1-5/16-12
7/8-14
2403 10x10
1-1/16-12 2403 12x12
1-5/16-12 2403 16x16
G-2
CSI #
Female
Pipe
2
3/8
3/8
1/2
1/2
Thread
Size
1
9/16-18
3/4-16
3/4-16
7/8-14
Thread
Size
1
9/16-18
3/4-16
7/8-14
1-1/16-12
1-5/16-12
Thread
Size
1
9/16-18
3/4-16
7/8-14
1-1/16-12
Male
ORB
1
9/16-18
3/4-16
3/4-16
7/8-14
Male
ORB
CSI #
1
7/16-20
6902 4x4-NWO 9/16-18
6902 6x4-NWO 9/16-18
6902 6x6-NWO 9/16-18
3/4-16
6902 8x6-NWO 3/4-16
6902 8x8-NWO 3/4-16
3/4-16
6902 10x8-NWO 7/8-14
7/8-14
6902 12x8-NWO 1-1/16-12
6902 12x12-NWO 1-1/16-12
1-5/16-12
1-5/16-12
Female
NPSM
2
7/16-20
9/16-18
9/16-18
7/8-14
CSI #
Thread
Size
1
7/16-20
1/2-20
9/16-18
Thread
Size
CSI #
2-3
9/16-18 2603 6x6x6
3/4-16
2603 8x8x8
7/8-14
2603 10x10x10
1-1/16-12 2603 12x12x12
Male
Pipe
2
3/8
3/8
1/2
1/2
CSI #
Thread
Size
1
2408 6
2408 8
2408 10
2408 12
2408 16
9/16-18
3/4-16
7/8-14
CSI #
2500 6x6
2500 8x8
2500 10x10
Male
ORB
2
CSI #
7/16-20
6400 4x4-O
9/16-18
6400 6x6-O
3/4-16
6400 6x8-O
3/4-16
9/16-18
6400 8x6-O
3/4-16
3/4-16
6400 8x8-O
3/4-16
7/8-14
6400 8x10-O
3/4-16
1-1/16-12
6400 8x12-O
7/8-14
3/4-16
6400 10x8-O
7/8-14
7/8-14
6400 10x10-O
7/8-14
1-1/16-12
6400 10x12-O
6401 6x6-O 7/16-20
6401 8x6-O
6401 8x8-O 9/16-18
6401 10x8-O 9/16-18
Female
NPSM
CSI #
2
1/4
6901 4x4-NWO
1/4
6901 6x4-NWO
3/8
6901 6x6-NWO
1/2
6901 6x8-NWO
1/4
6901 8x4-NWO
3/8
6901 8x6-NWO
1/2
6901 8x8-NWO
3/4
6901 8x12 -NWO
1/2
6901 10x8-NWO
3/4
6901 10x12-NWO
1/2
6901 12x8-NWO
3/4
6901 12x12-NWO
3/4
6901 16x12-NWO
1
6901 16x16-NWO
2405 6x6
2405 8x6
2405 8x8
2405 10x8
CSI #
Thread Thread
Size
Size
1
2
9/16-18
3/4-16
7/8-14
CSI #
1-1/16-12 7/8-14
6400 12x10-O
1-1/16-12 1-1/16-12
6400 12x12-O
1-1/16-12 1-5/16-12
6400 12x16-O
1-5/16-12 1-1/16-12
6400 16x12-O
1-5/16-12 1-5/16-12
6400 16x16-O
1-5/16-12 1-5/8-12
6400 16x20-O
1-5/8-12
1-5/16-12
6400 20x16-O
1-5/8-12
1-5/8-12
6400 20X20-O
A
Bulk Hose
B
Vari-Crimp
CSI #
CSI #
4MOS-4MP
4MOS-6MP
6MOS-4MP
6MOS-6MP
6MOS-8MP
8MOS-6MP
8MOS-8MP
12MOS-12MP
6404 8x6
6404 8x8
6404 10x8
6404 12x12
Male
ORB
1
9/16-18
3/4-16
3/4-16
7/8-14
7/8-14
Female
Pipe
2
3/8
3/8
1/2
3/8
1/2
Thread
Male
Size
ORB
1
2
9/16x18
7/16-20
11/16x16
9/16-18
13/16x16
3/4-16
1-3/16x12 1-1/16-12
CSI #
6405 6x6
6405 8x6
6405 8x8
6405 10x6
6405 10x8
CSI #
4MOS-4MO
6MOS-6MO
8MOS-8MO
12MOS-12MO
F
Thread
Male
Size
Pipe
1
2
9/16x18
1/4
9/16x18
3/8
11/16x16
1/4
11/16x16
3/8
11/16x16
1/2
13/16x16
3/8
13/16x16
1/2
1-3/16x12 3/4
CSI #
Reusables, Pushon, Acces.
6425 8x8
6425 10x10
6420 10x8
6420 8x8
876FPO
6410 8x10
6410 10x8
6410 12x8
Female
Male
Pipe
ORB
2
1
3/4-16
3/8
3/4-16
1/2
1/2
7/8-14
1-1/16-12 3/4
E
878FJ
878FJC
878CA
878CO
878FCO
Female
Female
Thread
Thread
1
2
3/4-16 ORB 3/4-16 ORB
7/8-14 ORB 7/8-14 ORB
7/8-14 ORB 1/2 PIPE
3/4-16 ORB 1/2 PIPE
3/4-16 ORB 3/8 PIPE
CSI #
Refrigerant
G
Adapters
CSI #
4MOS-4MO90
6MOS-6MO90
8MOS-8MO90
12MOS-12MO90
H
Fabrication Equipment
Thread
Male
Size
ORB
1
2
9/16x18
7/16-20
11/16x16
9/16-18
13/16x16
3/4-16
1-3/16x12 1-1/16-12
CSI #
6408 6
6408 8
6408 10
6408 12
6408 16
Female
Male
ORB
ORB
1
2
STRAIGHT
7/8-14
3/4-16
7/8-14
3/4-16
1-1/16-12 3/4-16
D
Female
Thread
2
1/2 PIPE
1/2 PIPE
1/2 PIPE
7/8-14 ORB
7/8-18 CASE
CSI #
Thermoplastic
Male
Thread
1
7/8-14
1-1/16-12
7/8-18 CASE
7/8-18 CASE
7/8-14 ORB
Male
ORB
1
8MO-6TFP 9/16-18
8MO-8TFP 3/4-16
10MO-8TFP 7/8-14
1-1/16-12
1-5/16-12
CSI #
C
Female
Npsm
2-3
3/8
1/2
1/2
Grip Crimp
Male
ORB
1
3/4-16
3/4-16
7/8-14
J
Cross Reference
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
G-3
Hydraulic Hose Assembly Equipment
CS160P - 1-1/4” Portable Crimper (No dies included)
CS160PD - 1-1/4” Portable Crimper (Die set included)
The CS160P is capable of crimping thru 1-1/4” Four Spiral Hose. It may be powered by a hand pump (HH11), an air/hydrualic
pump (HH13), or an electric pump (99150). Its portable design and flexibility make it ideal for a multitude of applications.
Standard Dies: None
Optional Dies: 0.350, 0.450, 0.520, 0.670, 0.830, 0.950, 1.100, 1.320, 1.500, 1.730, & 1.920 (Crimp charts are available for all
coupling series to assist in die selection.)
The CS160PD is capable of crimping thru 1-1/4” Four Spiral Hose. This crimper comes with a complete set of dies to crimp
thru 1” Four Spiral hose. Optional dies are available to crimp thru 1-1/4” Four Spiral hose.
Standard Dies: 0.520, 0.670, 0.830, 0.950, 1.100, 1.320, & 1.500
Crimps 1/4” thru 1” Vari-Crimp, Grip-Crimp, 4H Series, & GW Series
Optional Dies:
Die
Part Number
Coupling Series
0.580 Bubble EN92-163-1
5/16” & 13/32” Refrigerant
0.850 Bubble EN92-163-2
1/2” & 5/8” Refrigerant
0.350
EN98-020-09
3/16” & 1/4” T Series, 1/8” 3-Series Thermoplastic
0.450
EN98-020-0450
5/16” T Series, 3/16” 3-Series Thermoplastic
1.730
EN98-020-07
1-1/4” Vari-Crimp, 1-1/4” 4H Series
1.920
EN98-020-08
1-1/4” Grip Crimp, 1-1/4” GW
CS165 - 1-1/4” Benchtop Crimper
The CS165 is capable of crimping thru 1-1/4” Four Spiral Hose. It comes standard with a complete set
of dies and a die storage shelf. Standard dies will crimp thru 1-1/4” Vari-Crimp, Grip Crimp, 4H Series,
and GW Series. The CS165 is capable of crimping straight or tube style couplings. It is powered by a
60 ton cylinder and a 1.0 HP, 110 volt automatic pump.
Standard Dies: 0.520, 0.670, 0.830, 0.950, 1.100, 1.320, 1.500, 1.730, & 1.920
Crimps 1/4” thru 1-1/4” Vari-Crimp, Grip-Crimp, 4H Series, & GW Series
Optional Dies:
Die
Part Number
Coupling Series
0.580 Bubble EN92-163-1
5/16” & 13/32” Refrigerant
0.850 Bubble EN92-163-2
1/2” & 5/8” Refrigerant
0.350
EN98-020-09
3/16” & 1/4” T Series, 1/8” 3-Series Thermoplastic
0.450
EN98-020-0450
5/16” T Series, 3/16” 3-Series Thermoplastic
CS205 - 2” Benchtop Crimper
The CS205 is capable of crimping thru 2” Six Spiral Hose. It comes standard with a set of dies to crimp
thru 2” Four Spiral (GW Series) and a die storage shelf. It is powered by a 80 ton cylinder and a 2.0 HP,
220 Volt automatic pump.
Standard Dies: 0.520, 0.670, 0.830, 0.950, 1.100, 1.320, 1.500, 1.730, 1.920, 2.140, & 2.800
Crimps 1/4” thru 1-1/4” Vari-Crimp & Grip-Crimp, 1/2” thru 1-1/4” 4H Series, & 1/2” thru 2” GW Series.
Optional Dies:
Part Number
Coupling Series
Die
0.580 Bubble EN92-163-1
5/16” & 13/32” Refrigerant
0.850 Bubble EN92-163-2
1/2” & 5/8” Refrigerant
0.350
EN98-020-09
3/16” & 1/4” T Series, 1/8” 3-Series Thermoplastic
0.450
EN98-020-0450 5/16” T Series, 3/16” 3-Series Thermoplastic
1.181
CC-020-1181
5/8” 6GC Series
1.730 WB
EN98-032-08
1” 6GC, 1-3/8” R5 Series
1.920 WB
EN98-032-04
1-1/4” SX
2.050 WB
EN98-032-12
1-1/2” 4H Series
2.140 WB
EN98-032-05
1-1/4” 6GC Series
2.300 WB
EN98-032-01
1-1/2” Grip Crimp, 1-1/2” 4GC, 1-1/2” 6GC, 1-1/2” SX, 1-1/2” XP
2.620 WB
EN98-032-07
2” 4H Series, 2” Grip Crimp, 2” 4GC
3.000 WB
EN98-032-09
2” 6GC, 2” XP
Couplamatic Systems Inc. Hydraulic Catalog 4010.
H-1
A
Bulk Hose
B
Vari-Crimp
Hydraulic Hose Assembly Equipment
C
Grip Crimp
E
Refrigerant
HH01 Hand Swage Machine
Hand operated swage coupling
machine. Couples hose from
3/16” thru 1” I.D. Easily
portable. Uses five ton jack
for swaging.
(38 lbs.)
Hose Cutting & Ski ving Machinery
H
J
Cross Reference
SAE 100R13
Skive Handle SH107
Skive Head 13SH12
Skive Head 13SH16
Skive Head 13SH20
Skive Head 13SH24
Skive Head 13SH32
Cutting Blade HH31001
Fabrication Equipment
K
Thread Identification
Refrigerant Hose Crimper, Dies, and Die Carriers
The HH3710 is a lightweight crimper designed to crimp
automotive air conditioning fittings on two braid, barrier hose. It
produces a barrel crimp which is R134A & R12 compatible.
Makes quick and easy professional repairs. For use with an air
impact wrench. 100 PSIG Max. Comes with six complete die sets
and carriers, which covers reduced & regular O.D. hose.
-3/4”
1”
1-1/4”
1-1/2”
2”
--
G
Refrigerant Hose Crimper and Dies
Adapters
(50 amp service required for HH81)
HH83--3 HP 230/460 V Three Phase (65 lbs.)
HH85--10” Reinforced Abrasive Blade (1/2 lb.)
(5/8” Arbor)
F
speed steel. For SE140
Cut-off machine. 5/8”
Arbor
Hand Skiving Tool
Hand skiving tool for use with
Spiral hydraulic hose where
removal of cover is required.
Order tool components by numbers
listed below.
Hose I.D. Description Part No.
SAE 100R12
-Skive Handle SH107
1/2”
Skive Head SH08
3/4”
Skive Head SH12
1”
Skive Head SH16
1-1/4”
Skive Head SH20
1-1/2”
Skive Head SH24
2”
Skive Head SH32
-Cutting Blade HH31001
Reusables, Pushon, Acces.
CS20 Cut-Off Machine
Cuts hose up to 1 1/4” I.D. Four Spiral.
Spiral Cut-Off Machine
2 hp 110V single phase 60hz motor
Capable of cutting 3/16” thru 1-1/2” I.D. wire
(49lbs)
CS20-7 - 7” Blade for CS20. 3/4” Arbor. reinforced hose including four spiral. Shipped
with two 10” reinforced abrasive wheels.
Shipped less power cord & plug. An electri7” Cut-Off Blade
cian is recommended for direct hookup.
#SE175 Standard
beveled edge blade. High HH81--3 HP 110/220 V Single Phase (87 lbs.)
D
99150 Electric Pump
1/2 H.P. hydraulic pump
produces 10,000 PSI. 115
volt single phase 60 Hz.
Includes hand held on-off
switch.
(49 lbs.)
Drilled Swage Dies &
Pushers
These dies and pushers work
in swage machines.
Precision engineered and
manufactured to insure a
perfect assembly job every
time.
Thermoplastic
HH11 Hydraulic Hand Pump
High efficiency 10,000 PSI single
HH13 Air Hydraulic Pump
stage hand pump for portable opera- This 10,000 PSI pump operates
tion of the 99060 or CS160P
with 80 PSI to 120 PSI of air
Crimpers. (14 lbs.)
line pressure for use with 99060
or CS160P Crimpers, 3 way
valve allows retention of air
pressure. (12 lbs.)
An in line air filter-regulatorlubricator must be installed
ahead of this pump.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
H-2
Cross Reference Chart:
Note: Manufacturer tolerances vary.
Check hose OD and crimp diameters carefully!
Description:
One Wire Braid SAE
100R1AT
(Thin Cover)
Domestic
Two Wire Braid SAE
100R2AT
(Thin Cover)
Domestic
One Wire Braid SAE
100R1AT
(Thin Cover) Import
One Wire Braid
1SN/100R1AT
(Thin Cover) Import
Two Wire Braid SAE
100R2AT (Thin
Cover) Import
Two Wire Braid 2SN
(Thin Cover) Import
HY-PLUS I
1 Wire Hi-Pressure
Extremely Flexible
Domestic
HY-PLUS lll
2 Wire Hi-Pressure
Extremely Flexible
Domestic
100R17
1 Wire 3000 PSI
Extremely Flexible
Import
Couplamatic
1/4" 57MB1
3/8" 57MB1
1/2" 57MB1
3/4" 57MB1
1" 57MB1
1/4" 57MB2
3/8" 57MB2
1/2" 57MB2
5/8" 57MB2
3/4" 57MB2
1" 57MB2
1/4" 56MB1
3/8" 56MB1
1/2" 56MB1
3/4" 56MB1
1" 56MB1
1-1/4" 56MB1
1-1/2" 56MB1
2” 56MB1
1/4" 56MB1
3/8" 56MB1
1/2" 56MB1
3/4" 56MB1
1" 56MB1
1-1/4" 56MB1
1-1/2" 56MB1
2” 56MB1
1/4" 56MB2
3/8" 56MB2
1/2" 56MB2
5/8" 56MB2
3/4" 56MB2
1" 56MB2
1-1/4" 56MB2
1-1/2" 56MB2
2" 56MB2
1/4" 2SN
3/8" 2SN
1/2" 2SN
5/8" 2SN
3/4" 2SN
1" 2SN
1-1/4" 2SN
1-1/2" 2SN
2" 2SN
1/4" HPI
3/8" HPI
1/2" HPI
3/4" HPI
1" HPI
1/4" HPIII
3/8" HPIII
1/2" HPIII
5/8" HPIII
3/4" HPIII
1" HPIII
1/4" R17R
3/8" R17R
1/2" R17R
5/8" R17R
3/4" R17R
1" R17R
Weatherhead
H10404
H10406
H10408
H10412
H10416
H42504
H42506
H42508
H42510
H42512
H42516
H10404
H10406
H10408
H10412
H10416
H10420
Weatherhead
Parker
AX04
AX06
AX08
AX12
AX16
BXX04
BXX06
BXX08
BXX10
BXX12
BXX16
AX04
AX06
AX08
AX12
AX16
Parker
Aeroquip Aeroquip
FC211-04
FC211-06
FC211-08
FC211-12
FC211-16
FC212-4
FC212-6
FC212-8
FC212-10
FC212-12
FC212-16
FC211-04
FC211-06
FC211-08
FC211-12
FC211-16
Gates
4G1
6G1
8G1
12G1
16G1
4G2
6G2
8G2
10G2
12G2
16G2
4G1
6G1
8G1
12G1
16G1
H10404
H10406
H10408
H10412
H10416
H10420
H19004
H19006
H19008
H19012
H19016
H19020
H19024
H19032
AX04
AX06
AX08
AX12
AX16
422-4
422-6
422-8
422-12
422-16
422-20
422-24
422-32
FC211-04
FC211-06
FC211-08
FC211-12
FC211-16
4G1
6G1
8G1
12G1
16G1
H42504
H42506
H42508
H42510
H42512
H42516
H42520
H42524
H42532
H42504
H42506
H42508
H42510
H42512
H42516
H42520
H42524
H42532
H14504
H14506
H14508
H14512
H14516
H24504
H24506
H24508
H24510
H24512
H24516
H14504
H14506
H14508
H14510
H14512
H14516
Couplamatic Systems Inc. Hydraulic Catalog 4010.
BXX04
BXX06
BXX08
BXX10
BXX12
BXX16
H29004
H29006
H29008
H29010
H29012
H29016
H29020
H29024
H29032
BXX04
BXX06
BXX08
BXX10
BXX12
BXX16
302-4
302-6
302-8
302-10
302-12
302-16
302-20
302-24
302-32
FC212-4
FC212-6
FC212-8
FC212-10
FC212-12
FC212-16
FC212-20
FC212-24
FC212-32
FC212-4
FC212-6
FC212-8
FC212-8
FC212-12
FC212-16
FC212-20
FC212-24
FC212-32
FC639-04
FC639-06
FC639-08
FC639-12
FC639-16
431-4
431-6
431-8
431-10
431-12
431-16
FC639-04
FC639-06
FC639-08
FC639-10
FC639-12
FC639-16
J-1
GH663-4
GH663-6
GH663-8
GH663-12
GH663-16
GH663-20
GH663-24
GH663-32
4G2
6G2
8G2
10G2
12G2
16G2
GH793-4
GH793-6
GH793-8
GH793-10
GH793-12
GH793-16
GH793-20
GH793-24
GH793-32
4G2
6G2
8G2
10G2
12G2
16G2
4M3K
6M3K
8M3K
12M3K
16M3K
4M2T
6M2T
8M2T
10M2T
12M2T
16M2T
4M3K
6M3K
8M3K
10M3K
12M3K
16M3K
Bulk Hose
A
Cross Reference Chart:
Note: Manufacturer tolerances vary.
Check hose OD and crimp diameters carefully!
Description:
F
Reusables, Pushon, Acces.
G
Adapters
H
Fabrication Equipment
J
Cross Reference
100R6
Low Pressure
E
Textile Cover
Hydraulic Hose
Hi-Temp (Blue)
SAE 100R5
Refrigerant
Textile Cover
Hydraulic Hose
SAE 100R5
D
SAE 100R4
Hydraulic Suction
Hose
2583-4
2583-6
2583-8
2583-12
2583-16
FC318-12
FC318-16
FC318-20
FC318-24
FC318-32
1503-4
1503-5
1503-6
1503-8
1503-10
1503-12
1503-16
1503-20
1503-24
1503-32
FC300-04
FC300-05
FC300-06
FC300-08
FC300-10
FC300-12
FC300-16
FC300-20
FC300-24
FC300-32
FC466-04
FC466-06
FC466-08
Thermoplastic
SAE 100R3
Medium Pressure
Hydraulic Hose
4M2T-MTF
6M2T-MTF
8M2T-MTF
10M2T-MTF
12M2T-MTF
16M2T-MTF
4G3H
6G3H
8G3H
12G3H
16G3H
12GMV
16GMV
20GMV
24GMV
32GMV
4C5C
5C5C
6C5C
8C5C
10C5C
12C5C
16C5C
20C5C
24C5C
32C5C
C
Dura-Hyd EX
R16/2SC 2 Wire
Hi-Pressure Super
Abrasion Resistant
Import
Gates
4M2T
6M2T
8M2T
10M2T
12M2T
16M2T
4M3K-XTF
6M3K-XTF
8M3K-XTF
10M3K-XTF
12M3K-XTF
16M3K-XTF
Grip Crimp
Dura-Hyd R16/2SC
2 Wire Hi-Pressure
Abrasion Resistant
Import
Aeroquip
GH781-4
GH781-6
GH781-8
GH781-10
GH781-12
GH781-16
B
Dura-Hyd R17
1 Wire 3000 PSI
Extremely Flexible
Domestic
Weatherhead Weatherhead Parker
H24504
H28004
431-4
H24506
H28006
431-6
H24508
H28008
431-8
H24510
H28010
431-10
H24512
H28012
431-12
H24516
H28016
431-16
H145R04
451TC-4
H145R06
451TC-6
H145R08
451TC-8
H145R10
451TC-10
H145R12
451TC-12
H145R16
451TC-16
471TC-4
471TC-6
471TC-8
471TC-10
471TC-12
471TC-16
471ST-4
471ST-6
471ST-8
471ST-10
471ST-12
471ST-16
H01704
601-4
H01706
601-6
H01708
601-8
H01712
601-12
H01716
601-16
H03912
881-12
H03916
881-16
H03920
881-20
H03924
881-24
H03932
881-32
H06904
201-4
H06905
201-5
H06906
201-6
H06908
201-8
H06910
201-10
H06912
201-12
H06916
201-16
H06920
201-20
H06924
201-24
H06932
201-32
H56904
206-4
H56905
206-5
H56906
206-6
H56908
206-8
H56910
206-10
H56912
206-12
H56916
206-16
H56920
206-20
H56924
206-24
H56932
206-32
H00904
H00906
H00908
Vari-Crimp
100R16/2SC
2 Wire Hi-Pressure
Extremely Flexible
Import
Couplamatic
1/4" R16
3/8" R16
1/2" R16
5/8" R16
3/4" R16
1" R16
1/4" DH17
3/8" DH17
1/2" DH17
5/8" DH17
3/4" DH17
1" DH17
1/4" DH16
3/8" DH16
1/2" DH16
5/8" DH16
3/4" DH16
1" DH16
1/4" DHEX16
3/8" DHEX16
1/2" DHEX16
5/8" DHEX16
3/4" DHEX16
1" DHEX16
1/4" 3319A
3/8" 3319A
1/2" 3319A
3/4" 3319A
1" 3319A
3/4" 104MB
1" 104MB
1-1/4" 104MB
1-1/2" 104MB
2" 104MB
3/16" 58MBA ( # 4 )
1/4" 58MBA ( # 5 )
5/16" 58MBA ( # 6 )
13/32" 58MBA ( # 8 )
1/2" 58MBA ( # 10 )
5/8" 58MBA ( # 12 )
7/8" 58MBA ( # 16 )
1-1/8" 58MBA ( # 20 )
1-3/8" 58MBA ( # 24 )
1-13/16" 58MBA ( # 32 )
3/16" HTR5 ( # 4 )
1/4" HTR5 ( # 5 )
5/16" HTR5 ( # 6 )
13/32" HTR5 ( # 8 )
1/2" HTR5 ( # 10 )
5/8" HTR5 ( # 12 )
7/8" HTR5 ( # 16 )
1-1/8" HTR5 ( # 20 )
1-3/8" HTR5 ( # 24 )
1-13/16" HTR5 ( # 32 )
1/4" H6H
3/8" H6H
1/2" H6H
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
J-2
Cross Reference Chart:
Note: Manufacturer tolerances vary.
Check hose OD and crimp diameters carefully!
Couplamatic
1/8" H7
3/16" H7
100R7
1/4" H7
Thermoplastic
5/16" H7
3/8" H7
1/2" H7
3/4" H7
1" H7
1/4" H7NC
5/16" H7NC
100R7
3/8" H7NC
Non-Conductive
1/2" H7NC
Thermoplastic
3/4" H7NC
1" H7NC
1/4" H7TL
100R7
Twin Line
5/16" H7TL
Thermoplastic
3/8" H7TL
1/2" H7TL
100R7
1/4" H7TLNC
Twin Line
5/16" H7TLNC
Non-Conductive
3/8" H7TLNC
Thermoplastic
1/2" H7TLNC
3/16" HS8
100R8
1/4" HS8
Thermoplastic
3/8" HS8
1/2" HS8
100R8
1/4" HS8NC
Non-Conductive
3/8" HS8NC
Thermoplastic
1/2" HS8NC
100R7
1/4" RD7
Reduced OD
5/16" RD7
Thermoplastic
3/8" RD7
100R7
1/4" RD7NC
Reduced OD
5/16" RD7NC
Non Conductive
3/8" RD7NC
100R7
1/4" RD7TL
Reduced OD
5/16" RD7TL
Twin Line
3/8" RD7TL
100R7 Reduced OD 1/4" RD7TLNC
Twin Line
5/16" RD7TLNC
Non-Conductive
3/8" RD7TLNC
1/4" 025H
Rubber Covered
3/8" 025H
Push-on Hose
1/2" 025H
Oil Resistant
5/8" 025H
3/4" 025H
1/4" 024H
Blue
3/8" 024H
Rubber Covered
1/2" 024H
Push-on Hose Oil 5/8" 024H
Resistant
3/4" 024H
1/2" SP580
3/4" SP580
1" SP580
Four Spiral Hose
1-1/4" SP580
100R12 Domestic 1-1/2" SP580
2" SP580
Description:
Weatherhead Weatherhead Parker
H43608
H43612
H43616
Synflex Aeroquip
3130-02
3130-03
3130-04
3130-05
3130-06
3130-08
3130-12
3130-16
Aeroquip Gates
H43508
H43512
H43516
H43608
H43588
H43604
H43605
H43606
H43504
H43505
H43506
H43644
H43655
H43666
H43544
H43555
H43566
H20104
H20106
H20108
H20110
H20112
801-4
801-6
801-8
801-10
801-12
836-4
836-6
836-8
836-10
836-12
721-8
721-12
721-16
721-20
721-24
721-32
H43008
H43012
H43016
H43020
H43024
H43032
Couplamatic Systems Inc. Hydraulic Catalog 4010.
J-3
4LOLA
6LOLA
8LOLA
10LOLA
12LOLA
GH493-8
GH493-12
GH493-16
GH493-20
GH493-24
GH493-32
FC659-08
FC659-12
FC659-16
FC659-20
FC659-24
FC659-32
8EFG4K
12EFG4K
16EFG4K
20EFG4K
24C12M
32C12M
Bulk Hose
A
Cross Reference Chart:
Note: Manufacturer tolerances vary.
Check hose OD and crimp diameters carefully!
E
F
Reusables, Pushon, Acces.
4C14
5C14
6C14
Refrigerant
GH506-12
GH506-16
GH506-20
D
Gates
8EFG4K
12EFG4K
16EFG4K
20EFG4K
24C12M
32C12M
8EFG4K-MTF
12EFG4K-MTF
16EFG4K-MTF
20EFG4K-MTF
24C12M-MTF
32C12M-MTF
12EFG5K
16EFG5K
20EFG5K
24G5K
32G5K
12EFG5K-MTF
16EFG5K-MTF
20EFG5K-MTF
24G5K-MTF
32G5K-MTF
12EFG6K
16EFG6K
20EFG6K
24G6K
Thermoplastic
FC606-16
FC606-20
FC606-24
Aeroquip
FC250A08
FC250A12
FC250A16
FC250A20
FC250A24
FC250A32
C
10C14
G
H
Fabrication Equipment
285-6
285-8
285-10
285-12
271-6
Adapters
H33806
Aeroquip
GH493-8
GH493-12
GH493-16
GH493-20
GH493-24
GH493-32
FC736-08
FC736-12
FC736-16
FC736-20
FC736-24
FC736-32
FC273-12
FC273-16
FC273-20
FC273-24
FC273-32
FC273B-12
FC273B-16
FC273B-20
FC273B-24
FC273B-32
Grip Crimp
H48516
H48520
H48524
H46412
H46412
H46416
H46420
H46424
H46432
H24303
H24304
H24305
H24306
H24308
H24312
H24316
Parker
721-8
721-12
721-16
721-20
721-24
721-32
721ST-8
721ST-12
721ST-16
721ST-20
721ST-24
721ST-32
781-12
781-16
781-20
781-24
P35-32
781ST-12
781ST-16
781ST-20
781ST-24
P35ST-32
792-12
792-16
792-20
792-24
731-12
731-12
731-16
731-20
731-24
731-32
B
Weatherhead
H43008
H43012
H43016
H43020
H43024
H43032
H43008R
H43012R
H43016R
H43020R
H43024R
H43032R
H47012
H47016
H47020
H47024
H47032
Vari-Crimp
Couplamatic
1/2" RC12B
3/4" RC12B
Four Spiral Hose
1" RC12B
100R12 Import
1-1/4" RC12B
1-1/2" RC12B
2" RC12B
1/2" DHEXR12
3/4" DHEXR12
Four Spiral Hose
1" DHEXR12
100R12 Import
1-1/4" DHEXR12
Super Abrasion
1-1/2" DHEXR12
Resistant
2" DHEXR12
3/4" RC13
Four & Six Spiral 1" RC13
Hose 100R13
1-1/4" RC13
1-1/2" RC13
2" RC13
Four & Six Spiral 3/4" DHEXR13
Hose 100R13
1" DHEXR13
Super Abrasion
1-1/4" DHEXR13
Resistant
1-1/2" DHEXR13
2" DHEXR13
3/4" RC15
Four & Six Spiral 1" RC15
Hose 100R15
1-1/4" RC15
1-1/2" RC15
5/8" 4SH
3/4" 4SH
Four Spiral Hose 4SH 1" 4SH
1-1/4" 4SH
1-1/2" 4SH
2" 4SH
3/16" TR14
1/4" TR14
PTFE Hose
5/16" TR14
100R14
3/8" TR14
1/2" TR14
3/4" TR14
1" TR14
5/16" F204
R12 & R134A
13/32" F204
Refrigerant Hose
1/2" F204
5/8" F204
Air Brake Hose
3/8" J1402A
Description:
J
Cross Reference
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
J-4
Cross Reference Chart: Vari-Crimp & Weatherhead Couplings
Weatherhead
VariCrimp
Weatherhead
04U-04L
04U-054
04U-06C
04U-08C
04U-08D
04U-08A
04U-08F
04U-102
04U-104
04U-106
04U-108
04U-10C
04U-10D
04U-10F
04U-14K
04U-154
04U-202
04U-204
04U-254
04U-354
04U-356
04U-44P
04U-504
04U-505
04U-506
04U-554
04U-58C
04U-58D
04U-604
04U-605
04U-606
04U-60C
04U-60D
04U-644
04U-664
04U-665
04U-666
04U-684
04U-685
04U-74P
04U-754
04U-755
04U-A24
04U-A26
04U-A64
04U-A66
04U-B03
04U-B04
04U-B05
04U-B43
04U-B44
04U-B45
04U-B63
04U-B64
04U-B65
04U-C34
04U-E64
04U-J02
04U-J04
04U-J06
04U-J34
04U-L64
04U-L66
04U-MO4
04U-P04
04U-P05
04U-P06
04U-P54
04U-R04
04U-S64
04U-S66
04U-S68
04U-T04
06U-056
06U-058
06U-06L
06U-104
06U-106
4L04V
409V
4C06V
4C08V
4D08V
4M08V
4M58V
400V
403V
415V
439V
4C10V
4D10V
4M60V
4K14V
4T54V
436V
412V
484V
481V
486V
4P44V
418V
421V
430V
4224V
4C58V
4D58V
424V
427V
433V
4C60V
4D60V
4163V
4130V
4157V
4160V
4127V
4154V
4P74V
4100V
4103V
4A24V
4A26V
4A64V
4A66V
4169V
4106V
4133V
4172V
4109V
4136V
4175V
4112V
4139V
445V
4E64V
462V
406V
466V
4J34V
4L64V
4L66V
4206V
451V
454V
448V
4P54V
457V
4S64V
4S66V
4S68V
4T04V
606V
648V
6L06V
600V
603V
06U-108
06U-10A
06U-10C
06U-10D
06U-10F
06U-12A
06U-12C
06U-12D
06U-12F
06U-14F
06U-156
06U-18K
06U-204
06U-206
06U-256
06U-306
06U-356
06U-358
06U-406
06U-446
06U-46P
06U-486
06U-506
06U-508
06U-510
06U-556
06U-604
06U-606
06U-608
06U-60C
06U-60D
06U-610
06U-612
06U-62C
06U-62D
06U-62E
06U-644
06U-646
06U-64C
06U-64E
06U-648
06U-664
06U-666
06U-668
06U-684
06U-686
06U-688
06U-755
06U-756
06U-76P
06U-A24
06U-A26
06U-A28
06U-A66
06U-A68
06U-B04
06U-B05
06U-B06
06U-B07
06U-B44
06U-B45
06U-B46
06U-B47
06U-B64
06U-B65
06U-B66
06U-B67
06U-C36
06U-E66
06U-E68
06U-J04
06U-J06
06U-J08
06U-J36
06U-J38
06U-L66
06U-L68
06U-M06
VariCrimp
615V
6M10V
6C10V
6D10V
6M60V
6M12V
6C12V
6D12V
6M62V
6M64V
6T56V
6K18V
663V
612V
684V
624V
681V
694V
633V
6172V
6P46V
6148V
618V
621V
669V
6227V
675V
627V
630V
6C60V
6D60V
657V
691V
6C62V
6D62V
6H62V
6190V
6166V
6C64V
6H64V
6124V
6187V
6160V
6163V
6184V
6157V
6169V
6103V
6106V
6P76V
6A24V
6A26V
6A28V
6A66V
6A68V
6175V
6109V
6136V
6193V
6178V
6112V
6139V
6196V
6181V
6115V
6142V
6199V
660V
6E66V
6E68V
666V
609V
651V
6J36V
6J38V
6L66V
6L68V
6209V
VariCrimp
Weatherhead
06U-P06
06U-P08
06U-P10
06U-P56
06U-P58
06U-R06
06U-R08
06U-R66
06U-R68
06U-S64
06U-S66
06U-S68
06U-T06
08U-058
08U-08L
08U-104
08U-106
08U-108
08U-112
08U-158
08U-15A
08U-15C
08U-15D
08U-16F
08U-208
08U-22K
08U-258
08U-358
08U-48P
08U-508
08U-510
08U-512
08U-558
08U-560
08U-606
08U-608
08U-610
08U-612
08U-616
08U-648
08U-650
08U-65D
08U-668
08U-66C
08U-66E
08U-670
08U-688
08U-690
08U-758
08U-760
08U-78P
08U-A26
08U-A28
08U-A30
08U-A68
08U-A70
08U-B08
08U-B10
08U-B48
08U-B68
08U-E68
08U-E70
08U-E72
08U-G08
08U-G41
08U-G71
08U-J06
08U-J08
08U-J36
08U-J38
08U-L66
08U-L68
08U-L70
08U-M08
08U-P08
08U-P10
08U-P12
08U-P56
636V
639V
642V
6P56V
6P58V
678V
645V
6278V
6245V
6S64V
6S66V
6S68V
6T06V
806V
8L08V
866V
800V
803V
854V
8T58V
8M15V
8C15V
8D15V
8M66V
812V
8K22V
884V
881V
8P48V
815V
818V
848V
8224V
8227V
842V
824V
827V
845V
863V
8163V
8166V
8D65V
8133V
8C66V
8H66V
8160V
8130V
8157V
8103V
8106V
8P78V
8A26V
8A28V
8A30V
8A68V
8A70V
8109V
8136V
8112V
8115V
8E68V
8E70V
8E72V
8G08V
8G41V
8G71V
857V
809V
8J36V
8J38V
8L66V
8L68V
8L70V
8209V
830V
833V
860V
8P56V
Weatherhead
08U-P58
08U-R08
08U-R10
08U-R68
08U-R70
08U-S66
08U-S68
08U-S70
08U-S72
08U-T08
10U-108
10U-112
10U-18A
10U-18C
10U-18D
10U-20F
10U-24K
10U-360
10U-508
10U-510
10U-512
10U-608
10U-610
10U-612
10U-670
10U-672
10U-68D
10U-690
10U-692
10U-70C
10U-70E
10U-80P
10U-A30
10U-A32
10U-A70
10U-E70
10U-E72
10U-L70
10U-L72
10U-P08
10U-P10
10U-P12
10U-S70
10U-S72
10U-T10
12U-062
12U-108
12U-112
12U-116
12U-12L
12U-162
12U-212
12U-262
12U-22A
12U-22C
12U-22D
12U-30K
12U-312
12U-362
12U-412
12U-510
12U-512
12U-514
12U-516
12U-52P
12U-610
12U-612
12U-614
12U-616
12U-652
12U-670
12U-672
12U-692
12U-696
12U-70C
12U-72D
12U-75C
12U-762
VariCrimp
Weatherhead
8P58V
836V
839V
8236V
8239V
8S66V
8S68V
8S70V
8S72V
8T08V
1000V
1003V
10M18V
10C18V
10D18V
10M70V
10K24V
1081V
1012V
1018V
1015V
1024V
1027V
1021V
1060V
1066V
10D68V
1057V
1063V
10C70V
10H70V
10P80V
10A30V
10A32V
10A70V
10E70V
10E72V
10L70V
10L72V
1030V
1033V
1036V
10S70V
10S72V
10T10V
1206V
1200V
1203V
1254V
12L12V
12T62V
1212V
1284V
12M22V
12C22V
12D22V
12K30V
1242V
1281V
1224V
1218V
1215V
1260V
1233V
12P52V
1230V
1221V
1245V
1236V
12657V
12660V
12651V
12612V
12663V
12C70V
12D72V
12C75V
12100V
This cross reference is for thread identification and hose inside diameter only. Exact dimensions of the couplings may vary from manufacturer to manufacturer.
Please check hose cut off factor, tube length, and tube drop carefully!
Couplamatic Systems Inc. Hydraulic Catalog 4010.
J-5
12U-82P
12U-A30
12U-A32
12U-A36
12U-A72
12U-E72
12U-G12
12U-G16
12U-G42
12U-G46
12U-G72
12U-G76
12U-J12
12U-J42
12U-L70
12U-L72
12U-L76
12U-M12
12U-P10
12U-P12
12U-P62
12U-R72
12U-S70
12U-S72
12U-S76
12U-T12
16U-066
16U-112
16U-116
16U-16L
16U-28C
16U-33K
16U-366
16U-514
16U-516
16U-612
16U-616
16U-620
16U-656L33
16U-676
16U-696
16U-766
16U-80C
16U-86P
16U-A36
16U-A76
16U-E76
16U-G16
16U-G20
16U-G46
16U-G50
16U-G76
16U-G80
16U-J16
16U-J46
16U-L76
16U-M16
16U-P16
16U-S76
16U-T16
20U-070
20U-120
20U-36K
20U-370
20U-520
20U-620
20U-677
20U-A40
20U-G20
20U-G50
20U-G80
20U-J50
20U-L80
20U-S80
VariCrimp
12P82V
12A30V
12A32V
12A36V
12A72V
12E72V
12G12V
12G16V
12G42V
12G46V
12G72V
12G76V
1209V
12J42V
12L70V
12L72V
12L76V
12209V
1248V
1227V
12P62V
12239V
12S70V
12S72V
12S76V
12T12V
1606V
1603V
1600V
16L16V
16C28V
16K33V
1681V
1615V
1612V
1621V
1618V
1624V
16657V
16651V
16612V
16100V
16C80V
16P86V
16A36V
16A76V
16E76V
16G16V
16G20V
16G46V
16G50V
16G76V
16G80V
1609V
16J46V
16L76V
16209V
1630V
16S76V
16T16V
2008V
2000V
20K36V
2081V
2015V
2005V
20677V
20A40V
20G20V
20G50V
20G80V
20J50V
20L80V
20S80V
J
Cross Reference
K
Thread Identification
J-6
H
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Fabrication Equipment
This cross reference is for thread identification and hose inside diameter only. Exact dimensions of the couplings may vary from manufacturer to manufacturer.
Please check hose cut off factor, tube length, and tube drop carefully!
G
12T12V
1212SV
1209V
1245V
1260V
1236V
1233V
1254V
12S76V
12G16V
12M22V
12C22V
12D22V
12D72V
12K30V
1621V
1603V
1615V
1681V
16P86V
1618V
16612V
16651V
16657V
1606V
1612V
16L16V
1600V
16100V
16L76V
16A36V
16A76V
16S76V
16E76V
16G16V
16G46V
16G76V
1630V
16T16V
1616SV
1609V
1624V
16G20V
16C28V
16K33V
2005V
20677V
2008V
2015V
2000V
20L80V
20A40V
20S80V
Adapters
HY12-12RL
HY12-12RM
HY12-12SP
HY12-14FJ
HY12-14MJ
HY12-16FJ
HY12-16MJ
HY12-16MP
HY12-16OFT
HY12-16PA
HY12-22MZ30B
HY12-22RU30B
HY12-22RU30B45T
HY12-22RU30B90T
HY12-30KMF
HY16-12FJ
HY16-12MP
HY16-14MJ
HY16-16BPF
HY16-16BPF90T
HY16-16FJ
HY16-16FJ45T
HY16-16FJ90T
HY16-16FJ90TL
HY16-16FN
HY16-16MJ
HY16-16MJFP
HY16-16MP
HY16-16MV
HY16-16OF45T
HY16-16OF90T
HY16-16OF90TL
HY16-16OFT
HY16-16OM
HY16-16PA
HY16-16PA45
HY16-16PA90
HY16-16RA
HY16-16RL
HY16-16RM
HY16-16SP
HY16-20FJ
HY16-20PA
HY16-28RU36B
HY16-33KMF
HY20-20FJ
HY20-20FJ90T
HY20-20FN
HY20-20MJ
HY20-20MP
HY20-20OF45T
HY20-20OF90T
HY20-20OFT
F
8E72V
860V
8M15V
8C15V
8D15V
8D65V
863V
8M66V
8C66V
8H66V
8K22V
1024V
1012V
1000V
1030V
1081V
10P80V
1027V
1057V
1060V
1018V
10L70V
10A30V
10A70V
10S70V
1033V
10T10V
1021V
1063V
1066V
1015V
1003V
10L72V
10A32V
10S72V
10C18V
10K24V
1200V
1230V
12660V
1218V
12L70V
12A30V
12S70V
1248V
12P62V
1281V
12P52V
12P82V
12T62V
1224V
1212V
1221V
12612V
12651V
12657V
1206V
1242V
1215V
12L12V
1203V
12100V
12L72V
12A32V
12A72V
12S72V
12G12V
12G42V
12G72V
1227V
1239V
12239V
Reusables, Pushon, Acces.
HY08-12OM
HY08-12RA
HY08-15MZ22A
HY08-15RU22A
HY08-15RU22A45T
HY08-15RU22A90T
HY08-16FJ
HY08-16MZ24A
HY08-16RO24A
HY08-16RO24A90T
HY08-22KMF
HY10-08FJ
HY10-08MJ
HY10-08MP
HY10-08RA
HY10-10BPF
HY10-10BPF90T
HY10-10FJ
HY10-10FJ45T
HY10-10FJ90T
HY10-10MJ
HY10-10OF45T
HY10-10OF90T
HY10-10OF90TL
HY10-10OFT
HY10-10RA
HY10-10RL
HY10-12FJ
HY10-12FJ45T
HY10-12FJ90T
HY10-12MJ
HY10-12MP
HY10-12OF45T
HY10-12OF90T
HY10-12OFT
HY10-18RU26A
HY10-24KMF
HY12-08MP
HY12-10FJ
HY12-10FJ90T
HY12-10MJ
HY12-10OF45T
HY12-10OF90T
HY12-10OFT
HY12-10RA
HY12-12BP
HY12-12BPF
HY12-12BPF45T
HY12-12BPF90T
HY12-12BT
HY12-12FA
HY12-12FF
HY12-12FJ
HY12-12FJ45T
HY12-12FJ90T
HY12-12FJ90TL
HY12-12FN
HY12-12MA
HY12-12MJ
HY12-12MJPF
HY12-12MP
HY12-12MV
HY12-12OF45T
HY12-12OF90T
HY12-12OF90TL
HY12-12OFT
HY12-12PA
HY12-12PA45
HY12-12PA90
HY12-12RA
HY12-12RC
HY12-12RC90
VariCrimp
E
642V
6C10V
6D10V
6D60V
694V
691V
6M12V
6M62V
6C12V
6D62V
6K18V
866V
8P56V
842V
800V
8L66V
8A26V
8S66V
857V
8P58V
881V
8P48V
8P78V
8T58V
812V
824V
8130V
8224V
8133V
8163V
806V
8109V
8112V
8115V
815V
8L08V
803V
8103V
8L68V
8A28V
8A68V
8S68V
8E68V
8G08V
8G41V
8G71V
830V
836V
8236V
8T08V
88SV
809V
8209V
827V
8157V
8227V
8160V
8166V
818V
8106V
8L70V
8A30V
8A70V
8S70V
8E70V
833V
839V
8239V
845V
848V
854V
8S72V
Parker
Dayco
HY Series
Refrigerant
HY06-10RA
HY06-10RU16A
HY06-10RU16A45T
HY06-10RU16A90T
HY06-12BPF
HY06-12FJ
HY06-12MZ18A
HY06-12MZ20A
HY06-12RU18A
HY06-12RU18A90T
HY06-18KMF
HY08-04MP
HY08-06BP
HY08-06FJ
HY08-06MP
HY08-06OF45T
HY08-06OF90T
HY08-06OFT
HY08-06SP
HY08-08BP
HY08-08BPF
HY08-08BPF45T
HY08-08BPF90T
HY08-08BT
HY08-08FF
HY08-08FJ
HY08-08FJ45T
HY08-08FJ90
HY08-08FJ90T
HY08-08FJ90TL
HY08-08FN
HY08-08MF
HY08-08MF45T
HY08-08MF90T
HY08-08MJ
HY08-08MJPF
HY08-08MP
HY08-08MV
HY08-08OF45T
HY08-08OF90T
HY08-08OF90TL
HY08-08OFT
HY08-08OM
HY08-08PA
HY08-08PA45
HY08-08PA90
HY08-08RA
HY08-08RC
HY08-08RC90
HY08-08RL
HY08-08RM
HY08-08SP
HY08-08SP90
HY08-10FJ
HY08-10FJ45T
HY08-10FJ90
HY08-10FJ90T
HY08-10FJ90TL
HY08-10MJ
HY08-10MV
HY08-10OF45T
HY08-10OF90T
HY08-10OF90TL
HY08-10OFT
HY08-10OM
HY08-10RA
HY08-10RC
HY08-10RC90
HY08-12FJ
HY08-12MJ
HY08-12MP
HY08-12OFT
VariCrimp
D
6181V
600V
6A24V
6S64V
666V
6109V
6112V
6115V
6103V
6P56V
681V
6P46V
6P76V
6T56V
633V
6148V
6151V
6172V
6145V
612V
627V
6157V
6227V
6160V
6166V
606V
624V
6136V
6139V
6142V
618V
6L06V
603V
6106V
6L66V
6A26V
6A66V
6S66V
6E66V
636V
678V
6278V
6T06V
66SV
609V
6209V
6193V
6196V
6199V
6P58V
688V
630V
6169V
6230V
6163V
621V
615V
6800V
660V
6L68V
6A28V
6A68V
6S68V
639V
645V
6245V
651V
6251V
657V
669V
6M10V
6M60V
Parker
Dayco
HY Series
Thermoplastic
HY06-04MF90T
HY06-04MP
HY06-04OF90T
HY06-04OFT
HY06-04SP
HY06-05MF
HY06-05MF45T
HY06-05MF90T
HY06-05MV
HY06-06BP
HY06-06BPF
HY06-06BPF45T
HY06-06BPF90T
HY06-06BT
HY06-06FA
HY06-06FA45T
HY06-06FA90T
HY06-06FA90TL
HY06-06FAT
HY06-06FF
HY06-06FJ
HY06-06FJ45T
HY06-06FJ90
HY06-06FJ90T
HY06-06FJ90TL
HY06-06FN
HY06-06MA
HY06-06MF
HY06-06MF45T
HY06-06MF90T
HY06-06MJ
HY06-06MJPF
HY06-06MP
HY06-06MV
HY06-06OF45T
HY06-06OF90T
HY06-06OF90TL
HY06-06OFT
HY06-06OM
HY06-06RA
HY06-06RC
HY06-06RC90
HY06-06RL
HY06-06RM
HY06-06SP
HY06-06SP90
HY06-07MF
HY06-07MF45T
HY06-07MF90T
HY06-08BP
HY06-08FF
HY06-08FJ
HY06-08FJ45T
HY06-08FJ90
HY06-08FJ90T
HY06-08MJ
HY06-08MP
HY06-08MV
HY06-08NV
HY06-08OF45T
HY06-08OF90T
HY06-08OF90TL
HY06-08OFT
HY06-08RA
HY06-08RC
HY06-08RC90
HY06-08SP
HY06-08SP90
HY06-10FJ
HY06-10MJ
HY06-10MZ16A
HY06-10MZ18A
VariCrimp
C
436V
400V
462V
4169V
4172V
4175V
4P54V
481V
4P44V
4P74V
4T54V
412V
424V
4127V
4130V
4163V
409V
4106V
4109V
4112V
418V
4L04V
403V
4100V
4L64V
4A24V
4A64V
4S64V
4E64V
451V
457V
4T04V
406V
4206V
427V
4154V
4157V
4133V
4136V
4139V
421V
4103V
454V
486V
442V
433V
4160V
4178V
430V
415V
4L66V
4A26V
4S66V
448V
4C06V
466V
439V
4M08V
4M58V
445V
4S68V
4C08V
4D08V
4D58V
4C10V
4M60V
4D60V
4K14V
663V
675V
6175V
6178V
Parker
Dayco
HY Series
Grip Crimp
HY04-02FF
HY04-02MP
HY04-02SP
HY04-03MF
HY04-03MF45T
HY04-03MF90T
HY04-04BP
HY04-04BPF
HY04-04BPF45T
HY04-04BPF90T
HY04-04BT
HY04-04FF
HY04-04FJ
HY04-04FJ45T
HY04-04FJ90T
HY04-04FJ90TL
HY04-04FN
HY04-04MF
HY04-04MF45T
HY04-04MF90T
HY04-04MJ
HY04-04MJPF
HY04-04MP
HY04-04MV
HY04-04OF45T
HY04-04OF90T
HY04-04OF90TL
HY04-04OFT
HY04-04OM
HY04-04RA
HY04-04RC
HY04-04RL
HY04-04SP
HY04-04SP90
HY04-05FJ
HY04-05FJ45T
HY04-05FJ90T
HY04-05MF
HY04-05MF45T
HY04-05MF90T
HY04-05MJ
HY04-05MV
HY04-05RA
HY04-06BPF
HY04-06FA
HY04-06FJ
HY04-06FJ90T
HY04-06FJ90TL
HY04-06MJ
HY04-06MP
HY04-06OF45T
HY04-06OF90T
HY04-06OFT
HY04-06RA
HY04-06RU12A
HY04-06SP
HY04-08MP
HY04-08MZ14A
HY04-08MZ16A
HY04-08NV
HY04-08OFT
HY04-08RU14A
HY04-08RU14A45T
HY04-08RU14A90T
HY04-08RU16A
HY04-10MZ18A
HY04-10RU16A90T
HY04-14KMF
HY06-04FF
HY06-04FJ
HY06-04MF
HY06-04MF45T
VariCrimp
B
Parker
Dayco
HY Series
Vari-Crimp
VariCrimp
A
Parker
Dayco
HY Series
Bulk Hose
Cross Reference Chart: Vari-Crimp & Parker-Dayco Couplings
Cross Reference Chart: Vari-Crimp & Parker Couplings
Parker
HY Series
101HY-12-10
101HY-12-12
101HY-12-16
101HY-12-8
101HY-16-12
101HY-16-16
101HY-20-20
101HY-2-4
101HY-4-4
101HY-4-6
101HY-4-8
101HY-6-4
101HY-6-6
101HY-6-8
101HY-8-10
101HY-8-12
101HY-8-4
101HY-8-6
101HY-8-8
102HY-12-12
102HY-2-4
102HY-4-4
102HY-4-6
102HY-6-6
102HY-8-6
102HY-8-8
103HY-10-10
103HY-10-12
103HY-10-6
103HY-10-8
103HY12-10
103HY-12-12
103HY-12-8
103HY-14-12
103HY-14-16
103HY-16-12
103HY-16-16
103HY-20-20
103HY-4-4
103HY-5-4
103HY-6-4
103HY-6-6
103HY-8-6
103HY-8-8
104HY-6-6
105HY-10-10
105HY-10-6
105HY-10-8
105HY-10-12
105HY-12-12
105HY-12-8
105HY-16-16
105HY-4-4
105HY-5-4
105HY-6-4
105HY-6-6
105HY-8-6
105HY-8-8
106HY-10-10
106HY-10-12
106HY-10-8
106HY-10-6
106HY-12-6
106HY-12-10
106HY-12-12
106HY-12-16
106HY-12-8
106HY-14-12
106HY-16-8
106HY-16-12
106HY-16-16
106HY-20-16
VariCrimp
1003V
1203V
1603V
854V
1254V
1600V
2000V
400V
403V
600V
866V
415V
603V
800V
1000V
1200V
439V
615V
803V
1212V
436V
412V
663V
612V
688V
812V
1018V
1218V
669V
818V
1015V
1215V
848V
1260V
1615V
1233V
1612V
2015V
418V
421V
430V
618V
621V
815V
624V
1033V
642V
833V
1248V
1227V
860V
1630V
451V
454V
448V
636V
639V
830V
1027V
1230V
827V
657V
691V
1021V
1221V
1621V
845V
1245V
863V
1236V
1618V
1624V
Parker
HY Series
106HY-20-20
106HY-4-4
106HY-4-6
106HY-5-4
106HY-6-4
106HY-6-6
106HY-6-8
106HY-8-10
106HY-8-6
106HY-8-8
107HY-12-12
107HY-16-16
107HY-4-4
107HY-6-6
107HY-8-8
108HY-12-12
108HY-6-4
108HY-6-6
10GHY-10-8
10GHY-12-12
10GHY-4-4
10GHY-6-6
10GHY-8-6
10GHY-8-8
10LHY-10-8
10LHY-12-12
10LHY-6-6
10LHY-8-6
10LHY-8-8
111HY-10-8
111HY-12-12
111HY-16-16
111HY-4-4
111HY-5-6
111HY-6-6
111HY-8-6
111HY-8-8
115HY-12-12
115HY-16-12
115HY-16-16
115HY-20-16
115HY-8-8
117HY-12-12
117HY-8-8
119HY-12-12
119HY-16-16
119HY-8-8
11LHY-4-4
11LHY-6-6
11LHY-8-6
128HY-3-4
128HY-4-4
128HY-5-4
128HY-5-6
128HY-6-6
128HY-7-6
128HY-8-8
134HY-12-12
134HY-6-6
137HY-10-10
137HY-10-8
137HY-12-12
137HY-16-16
137HY-4-4
137HY-5-4
137HY-6-6
137HY-8-6
137HY-8-8
139HY-10-10
139HY-10-12
139HY-10-8
139HY-12-10
VariCrimp
2005V
424V
675V
427V
433V
627V
842V
1024V
630V
824V
1206V
1606V
409V
606V
806V
1224V
442V
633V
839V
1239V
457V
678V
645V
836V
8239V
12239V
6278V
6245V
8236V
8106V
12100V
16100V
4100V
6103V
6106V
6800V
8103V
12G12V
12G16V
16G16V
16G20V
8G08V
12G42V
8G41V
12G72V
16G76V
8G71V
4206V
6209V
6251V
4169V
4106V
4133V
6109V
6136V
6193V
8109V
12T12V
6T06V
1057V
8157V
12612V
16612V
4127V
4154V
6157V
6169V
8130V
1060V
12660V
8160V
1066V
Parker
HY Series
139HY-12-12
139HY-16-16
139HY-4-4
139HY-5-4
139HY-6-4
139HY-6-6
139HY-8-6
139HY-8-8
141HY-10-8
141HY-12-12
141HY-16-16
141HY-4-4
141HY-6-4
141HY-6-6
141HY-8-8
167HY-4-4
167HY-5-4
167HY-5-6
167HY-6-6
167HY-8-8
169HY-3-4
169HY-4-4
169HY-4-6
169HY-5-4
169HY-5-6
169HY-6-6
169HY-7-6
169HY-8-8
177HY-6-6
179HY-6-6
181HY-6-6
192HY-8-6
193HY-6-6
193HY-8-6
193HY-8-8
1B1HY-12-12
1B1HY-4-4
1B1HY-6-6
1B1HY-8-8
1B2HY-10-10
1B2HY-12-12
1B2HY-16-16
1B2HY-4-4
1B2HY-6-6
1B2HY-8-8
1C3HY-10-6
1C3HY-12-6
1C3HY-15-8
1C3HY-18-10
1C3HY-22-12
1C3HY-28-16
1C3HY-6-4
1C3HY-8-4
1C4HY-10-6
1C4HY-15-8
1C4HY-22-12
1C4HY-8-4
1C5HY-10-6
1C5HY-10-4
1C5HY-12-6
1C5HY-15-8
1C5HY-22-12
1C5HY-8-4
1C5HY-10-4
1C6HY-8-4
1C8HY-16-8
1C9HY-16-8
1D0HY-10-4
1D0HY-10-6
1D0HY-12-6
1D0HY-15-8
1D0HY-8-4
VariCrimp
12651V
16651V
4130V
4157V
4160V
6160V
6163V
8133V
8166V
12657V
16657V
4163V
4178V
6166V
8163V
4109V
4136V
6112V
6139V
8112V
4175V
4112V
6181V
4139V
6115V
6142V
6199V
8115V
6148V
6151V
6172V
694V
6227V
6230V
8224V
12P52V
4P44V
6P46V
8P48V
10P80V
12P82V
16P86V
4P74V
6P76V
8P78V
6C10V
6C12V
8C15V
10C18V
12C22V
16C28V
4C06V
4C08V
6D10V
8D15V
12D22V
4D08V
6D60V
4D60V
6D62V
8D65V
12D72V
4D58V
4D60V
4C10V
8H66V
8C66V
4M60V
6M10V
6M12V
8M15V
4M08V
Parker
HY Series
VariCrimp
Parker
HY Series
VariCrimp
1D2HY-12-6
1D2HY-16-8
1D2HY-8-4
1D9HY-4-4
1D9HY-6-6
1D9HY-8-6
1D9HY-8-8
1FUHY-12-12-SM
1GJHY-8-4
1GUHY-10-10
1GUHY-12-12
1GUHY-16-16
1GUHY-4-4
1GUHY-6-4
1GUHY-6-6
1GUHY-8-6
1GUHY-8-8
1HUHY-12-12
1HUHY-16-16
1HUHY-6-6
1HUHY-8-8
1J0HY-10-8
1J0HY-12-8
1J0HY-4-4
1J0HY-6-6
1J0HY-8-8
1J1HY-10-10
1J1HY-10-8
1J1HY-12-12
1J1HY-16-16
1J1HY-4-4
1J1HY-6-6
1J1HY-8-6
1J1HY-8-8
1J7HY-10-10
1J7HY-10-12
1J7HY-10-8
1J7HY-12-10
1J7HY-12-12
1J7HY-16-16
1J7HY-4-4
1J7HY-6-4
1J7HY-6-6
1J7HY-6-8
1J7HY-8-6
1J7HY-8-8
1J9HY-10-10
1J9HY-10-12
1J9HY-10-8
1J9HY-12-10
1J9HY-12-12
1J9HY-16-16
1J9HY-4-4
1J9HY-4-6
1J9HY-6-4
1J9HY-6-6
1J9HY-6-8
1J9HY-8-6
1J9HY-8-8
1JSHY-10-10
1JSHY-10-12
1JSHY-10-8
1JSHY-12-8
1JSHY-12-10
1JSHY-12-12
1JSHY-16-12
1JSHY-16-16
1JSHY-20-20
1JSHY-4-4
1JSHY-6-4
1JSHY-6-6
1JSHY-6-8
6M62V
8M66V
4M58V
4P54V
6P56V
6P58V
8P58V
12L12V
445V
1081V
1281V
1681V
481V
486V
681V
694V
881V
1212SV
1616SV
66SV
88SV
8E70V
8E72V
4E64V
6E66V
8E68V
10A70V
8A70V
12A72V
16A76V
4A64V
6A66V
6A68V
8A68V
10L70V
12L70V
8L70V
10L72V
12L72V
16L76V
4L64V
4L66V
6L66V
8L66V
6L68V
8L68V
10A30V
12A30V
8A30V
10A32V
12A32V
16A36V
4A24V
6A24V
4A26V
6A26V
8A26V
6A28V
8A28V
10S70V
12S70V
8S70V
8S72V
10S72V
12S72V
12S76V
16S76V
20S80V
4S64V
4S66V
6S66V
8S66V
1JSHY-8-4
1JSHY-8-6
1JSHY-8-8
1MUHY-22-8
1MUHY-4-4
1MUHY-6-6
1S2HY-12-12
1SGHY-6-6
1UTHY-4-4
1UTHY-6-6
1UTHY-8-8
1XUHY-12-12
1XUHY-16-16
1XUHY-24-10
4S68V
6S68V
8S68V
8K22V
4K14V
6K18V
1284V
6145V
4T54V
6T56V
8T58V
12K30V
16K33V
10K24V
This cross reference is for thread identification and hose inside diameter only. Exact dimensions of the couplings may vary from manufacturer to manufacturer.
Please check hose cut off factor, tube length, and tube drop carefully!
Couplamatic Systems Inc. Hydraulic Catalog 4010.
J-7
GW SERIES and SX Series & Weatherhead
WH 570 E
SX60-12X12
SX60-12X16
SX60-16X16
SX60-16X20
SX60-20X20
SX60-24X24
SX60-32X32
SX61-12X12
SX61-12X16
SX61-16X16
SX61-16X20
SX61-20X20
SX61-24X24
SX61-32X32
SX62-12X12
SX62-12X16
SX62-16X16
SX62-16X20
SX62-20X20
SX62-24X24
SX62-32X32
SX80-12X12
SX80-16X16
SX80-20X20
SX80-24X24
SX80-32X32
SX81-12X12
SX81-16X16
SX81-20X20
SX81-24X24
SX81-32X32
SX82-12X12
SX82-16X16
SX82-20X20
SX82-24X24
SX82-32X32
F
Reusables, Pushon, Acces.
* SX Series couplings are made from
standard Carbon Steel, not Stainless Steel.
This cross reference is for thread
identification and hose ID only.
E
57012S-D12
57012S-D16
57016S-D16
57016S-D20
57020S-D20
57024S-D24
57032S-D32
57012S-D42
57012S-D46
57016S-D46
57016S-D50
57020S-D50
57024S-D54
57032S-D62
57012S-D72
57012S-D76
57016S-D76
57016S-D80
57020S-D80
57024S-D84
57032S-D92
57012S-K12
57016S-K16
57020S-K20
57024S-K24
57032S-K32
57012S-K42
57016S-K46
57020S-K50
57024S-K54
57032S-K62
57012S-K72
57016S-K76
57020S-K80
57024S-K84
57032S-K92
SX SERIES*
Refrigerant
G
Adapters
H
Fabrication Equipment
J
Cross Reference
K
Thread Identification
For thread identification and hose I.D. only. Dimensions of the couplings may vary from
manufacturer to manufacturer. Check hose cut off factor and tube drop carefully!
Couplamatic Systems Inc. Hydraulic Catalog 4010.
12x12
12x12
12x16
12x12
12x12
12x12
12x16
12x12
12x16
12x12
12x16
12x12
12x12
12x12
12x12
16x16
16x16
16x16
16x16
16x16
16x20
16x16
16x20
16x16
16x20
16x16
16x16
16x16
16x16
20x20
20x20
20x20
20x20
20x20
20x20
20x20
20x20
20x20
24x24
24x24
24x24
24x24
24x24
32x32
32x32
D
SX01
SX09
SX09
SX26
SX25
SX60
SX60
SX61
SX61
SX62
SX62
SX47
SX50
SX53
SX30
SX01
SX09
SX26
SX25
SX60
SX60
SX61
SX61
SX62
SX62
SX47
SX50
SX53
SX30
SX01
SX09
SX60
SX61
SX62
SX47
SX50
SX53
SX30
SX01
SX09
SX60
SX61
SX62
SX01
SX09
Thermoplastic
SX SERIES
47012E-112
47012E-612
47012E-616
47012E-672
47012E-692
47012E-D12
47012E-D16
47012E-D42
47012E-D46
47012E-D72
47012E-D76
47012E-G12
47012E-G42
47012E-G72
47012E-S72
47016E-116
47016E-616
47016E-676
47016E-696
47016E-D16
47016E-D20
47016E-D46
47016E-D50
47016E-D76
47016E-D80
47016E-G16
47016E-G46
47016E-G76
47016E-S76
47020E-120
47020E-620
47020E-D20
47020E-D50
47020E-D80
47020E-G20
47020E-G50
47020E-G80
47020E-S80
47024E-124
47024E-624
47024E-D24
47024E-D54
47024E-D84
47032E-132
47032E-632
C
WH 470 E
GW30 12x12
GW30-12x16
GW01 16x12
GW01 16x16
GW39-16x33
GW10 16x16
GW08 16x16
GW09 16x12
GW09 16x16
GW09 16x20
GW26 16x16
GW25 16x16
GW38-16x30
GW32 16x16
GW33 16x16
GW60 16x16
GW60 16x20
GW61 16x16
GW62 16x16
GW62 16x20
GW29 16x16
GW47 16x16
GW47 16x20
GW50 16x16
GW50 16x20
GW53 16x16
GW54 16x16
GW53 16x20
GW48 16x16
GW48 16x20
GW49 16x16
GW51 16x16
GW51 16x20
GW52 16x16
GW52 16x20
GW56 16x16
GW31 16x16
GW11 16x16
GW30 16x16
GW01 20x20
GW08 20x20
GW09 20x20
GW09 20x24
GW26 20x20
GW25 20x20
GW32 20x20
GW60 20x20
GW61 20x20
GW62 20x20
GW47 20x20
GW47 20x24
GW50 20x20
GW50 20x24
GW53 20x20
GW54 20x20
GW53 20x24
GW48 20x20
GW49 20x20
GW51 20x20
GW52 20x20
GW56 20x20
GW31 20x20
GW30 20x20
GW01 24x24
GW09 24x24
GW26 24x24
GW47 24x24
GW50 24x24
GW53 24x24
GW01 32x32
GW09 32x32
GW47 32x32
GW50 32x32
GW53 32x32
Grip Crimp
GW SERIES
43012U-S72
43012U-S76
43016U-112
43016U-116
43016U-33K
43016U-366
43016U-516
43016U-612
43016U-616
43016U-620
43016U-676
43016U-696
43016U-80C
43016U-A36
43016U-A76
43016U-D16
43016U-D20
43016U-D46
43016U-D76
43016U-D80
43016U-E76
43016U-G16
43016U-G20
43016U-G46
43016U-G50
43016U-G76
43016U-G76L46
43016U-G80
43016U-H03
43016U-H04
43016U-H23
43016U-H53
43016U-H54
43016U-H63
43016U-H64
43016U-H83
43016U-L76
43016U-P16
43016U-S76
43020U-120
43020U-520
43020U-620
43020U-624
43020U-677
43020U-697
43020U-A40
43020U-D20
43020U-D50
43020U-D80
43020U-G20
43020U-G24
43020U-G50
43020U-G54
43020U-G80
43020U-G80L40
43020U-G84
43020U-H04
43020U-H24
43020U-H54
43020U-H64
43020U-H84
43020U-L80
43020U-S80
43024U-124
43024U-624
43024U-678
43024U-G24
43024U-G54
43024U-G84
43032U-132
43032U-632
43032U-G32
43032U-G62
43032U-G92
B
Weatherhead 430 U
GW01 8x8
GW01 8x12
GW39-8x22
GW10 8x8
GW08 8x8
GW08 8x10
GW09 8x6
GW09 8x8
GW09 8x10
GW09 8x12
GW26 8x8
GW26 8x10
GW25 8x8
GW25 8x10
GW32 8x8
GW32 8x10
GW33 8x8
GW33 8x10
GW29 8x8
GW47 8x8
GW47 8x12
GW50 8x8
GW50 8x12
GW53 8x8
GW53 8x12
GW31 8x8
GW31 8x10
GW30 8x8
GW30 8x10
GW01 12x12
GW01 12x16
GW37-12x22
GW39-12x30
GW10 12x12
GW08 12x12
GW08 12x14
GW08 12x16
GW43 12x12
GW09 12x12
GW09 12x14
GW09 12x16
GW26 12x12
GW25 12x12
GW38-12x25
GW32 12x10
GW32 12x12
GW33 12x12
GW60 12x12
GW60 12x16
GW61 12x12
GW61 12x16
GW62 12x12
GW62 12x16
GW29 12x12
GW47 12x12
GW47 12x16
GW50 12x12
GW50 12x16
GW53 12x12
GW54 12x12
GW53 12x16
GW54 12x16
GW48 12x12
GW48 12x16
GW49 12x12
GW51 12x12
GW51 12x16
GW52 12x12
GW52 12x16
GW55 12x12
GW55 12x16
GW57 12x12
GW31 12x12
GW36 12x12
GW30 12x10
Vari-Crimp
GW SERIES
43008U-108
43008U-112
43008U-22K
43008U-358
43008U-508
43008U-510
43008U-606
43008U-608
43008U-610
43008U-612
43008U-668
43008U-670
43008U-688
43008U-690
43008U-A28
43008U-A30
43008U-A68
43008U-A70
43008U-E68
43008U-G08
43008U-G12
43008U-G41
43008U-G42
43008U-G71
43008U-G72
43008U-L68
43008U-L70
43008U-S68
43008U-S70
43012U-112
43012U-116
43012U-22C
43012U-30K
43012U-362
43012U-512
43012U-514
43012U-516
43012U-52P
43012U-612
43012U-614
43012U-616
43012U-672
43012U-692
43012U-75C
43012U-A30
43012U-A32
43012U-A72
43012U-D12
43012U-D16
43012U-D42
43012U-D46
43012U-D72
43012U-D76
43012U-E72
43012U-G12
43012U-G16
43012U-G42
43012U-G46
43012U-G72
43012U-G72L37
43012U-G76
43012U-G76L31
43012U-H02
43012U-H03
43012U-H22
43012U-H52
43012U-H53
43012U-H62
43012U-H63
43012U-H72
43012U-H73
43012U-H92
43012U-L72
43012U-P62
43012U-S70
A
WH 430 U
Bulk Hose
Cross Reference Chart:
J-8
Cross Reference Chart:
Parker BW
GW SERIES
Parker BW
139BW-20-20
139BW-24-24
139BW-8-8
16ABW-12-12
16ABW-16-12
16ABW-16-16
16ABW-20-16
16ABW-20-20
16FBW-12-12
16FBW-16-16
16FBW-20-20
16NBW-12-12
16NBW-16-12
16NBW-16-16
16NBW-20-16
16NBW-20-20
1J0BW-12-12
1J0BW-16-16
1J0BW-8-8
1J1BW-10-8
1J1BW-12-12
1J1BW-16-16
1J1BW-8-8
1J7BW-10-8
1J7BW-12-12
1J7BW-16-16
1J7BW-20-20
1J7BW-8-8
1J9BW-10-8
1J9BW-12-12
1J9BW-16-16
1J9BW-20-20
1J9BW-8-8
1JSBW-10-12
1JSBW-10-8
1JSBW-12-12
1JSBW-16-12
1JSBW-16-16
1JSBW-20-20
1JSBW-8-8
GW SERIES & Parker-Dayco
GW SERIES
GW26
GW26
GW26
GW60
GW60
GW60
GW60
GW60
GW61
GW61
GW61
GW62
GW62
GW62
GW62
GW62
GW29
GW29
GW29
GW33
GW33
GW33
GW33
GW31
GW31
GW31
GW31
GW31
GW32
GW32
GW32
GW32
GW32
GW30
GW30
GW30
GW30
GW30
GW30
GW30
Parker-Dayco BW
20x20
24x24
8x8
12x12
12x16
16x16
16x20
20x20
12x12
16x16
20x20
12x12
12x16
16x16
16x20
20x20
12x12
16x16
8x8
8x10
12x12
16x16
8x8
8x10
12x12
16x16
20x20
8x8
8x10
12x12
16x16
20x20
8x8
12x10
8x10
12x12
12x16
16x16
20x20
8x8
GW SERIES
Parker Dayco BW
GW SERIES
GW09 8x6
BW08-06FJ
GW32 16x16
BW16-16OF90T
BW08-08FJ
GW09 8x8
BW16-16OF90TL
GW33 16x16
BW08-08FJ45T
GW25 8x8
BW16-16OFT
GW30 16x16
GW26 8x8
BW08-08FJ90T
GW29 16x16
BW16-16OM
BW08-08MJ
GW08 8x8
BW16-16PA
GW47 16x16
BW08-08MP
GW01 8x8
BW16-16PA22
GW48 16x16
GW31 8x8
BW08-08OF45T
GW49 16x16
BW16-16PA30
GW32 8x8
BW08-08OF90T
GW50 16x16
BW16-16PA45
BW08-08OF90TL
GW33 8x8
BW16-16PA60
GW51 16x16
BW08-10OF90TL
GW33 8x10
BW16-16PA67
GW52 16x16
GW30 8x8
BW08-08OFT
GW53 16x16
BW16-16PA90
BW08-08OM
GW29 8x8
BW16-16PA110
GW56 16x16
BW08-08PA
GW47 8x8
BW16-16PH
GW60 16x16
BW08-08PA45
GW50 8x8
BW16-16PH45
GW61 16x16
GW53 8x8
BW08-08PA90
GW62 16x16
BW16-16PH90
BW08-10FJ
GW09 8x10
BW16-16RA
GW11 16x16
BW08-10FJ45T
GW25 8x10
BW16-20FJ
GW09 16x20
GW26 8x10
BW08-10FJ90T
GW47 16x20
BW16-20PA
BW08-10OF45T
GW31 8x10
BW16-20PA22
GW48 16x20
BW08-10OF90T
GW32 8x10
BW16-20PA45
GW50 16x20
BW08-10OFT
GW30 8x10
BW16-20PA60
GW51 16x20
GW09 8x12
BW08-12FJ
GW52 16x20
BW16-20PA67
BW08-12MP
GW01 8x12
BW16-20PA90
GW53 16x20
GW30 12x10
BW12-10OFT
GW60 16x20
BW16-20PH
BW12-10OF90T
GW32 12x10
BW16-20PH90
GW62 16x20
BW12-12FJ
GW09 12x12
BW20-20FJ
GW09 20x20
GW25 12x12
BW12-12FJ45T
GW26 20x20
BW20-20FJ90T
BW12-12FJ90T
GW26 12x12
BW20-20MJ
GW08 20x20
BW12-12MJ
GW08 12x12
BW20-20MP
GW01 20x20
BW12-12MP
GW01 12x12
BW20-20OF45T
GW31 20x20
BW12-12OF45T
GW31 12x12
BW20-20OF90T
GW32 20x20
BW12-12OF90T
GW32 12x12
BW20-20OFT
GW30 20x20
BW12-12OF90TL
GW33 12x12
BW20-20PA
GW47 20x20
BW12-12OFT
GW30 12x12
BW20-20PA22
GW48 20x20
BW12-12OM
GW29 12x12
BW20-20PA30
GW49 20x20
BW12-12PA
GW47 12x12
BW20-20PA45
GW50 20x20
BW12-12PA22
GW48 12x12
BW20-20PA60
GW51 20x20
BW12-12PA30
GW49 12x12
BW20-20PA67
GW52 20x20
BW12-12PA45
GW50 12x12
BW20-20PA90
GW53 20x20
Parker-Dayco Cross Reference for
BW12-12PA60
GW51 12x12
BW20-20PA110
GW56 20x20
thread identification and hose I.D. only. BW12-12PA67
GW52 12x12
BW20-20PH
GW60 20x20
Check crimp diameters on page B-14 to BW12-12PA90
GW53 12x12
BW20-20PH45
GW61 20x20
ensure proper assembly. GW Series
BW12-12PA100
GW55 12x12
BW20-20PH90
GW62 20x20
couplings are designed for 100R12
BW12-12PA135
GW57 12x12
BW20-24FJ
GW09 20x24
hose and 3/4” thru 2” 100R2AT hose.
BW12-12PH
GW60 12x12
BW24-24FJ
GW09 24x24
BW12-12PH45
GW61 12x12
BW24-24FJ90T
GW26 24x24
BW12-12PH90
GW62 12x12
BW24-24MP
GW01 24x24
BW12-14FJ
GW09 12x14
BW24-24PA
GW47 24x24
BW12-16FJ
GW09 12x16
BW24-24PA45
GW50 24x24
BW12-16MJ
GW08 12x16
BW24-24PA90
GW53 24x24
BW12-16MP
GW01 12x16
BW32-32FJ
GW09 32x32
BW12-16OFT
GW30 12x16
BW32-32MP
GW01 32x32
BW12-16PA
GW47 12x16
BW32-32PA
GW47 32x32
BW12-16PA22
GW48 12x16
BW32-32PA45
GW50 32x32
BW12-16PA45
GW50 12x16
BW32-32PA90
GW53 32x32
BW12-16PA60
GW51 12x16
BW12-16PA67
GW52 12x16
Parker-Dayco Cross Reference for thread
BW12-16PA90
GW53 12x16
identification and hose I.D. only. Check
BW12-16PA100
GW55 12x16
crimp diameters on page B-14 to ensure
BW12-16PH
GW60 12x16
proper assembly. GW Series couplings are
BW12-16PH45
GW61 12x16
designed for 100R12 hose and 3/4” thru 2”
BW12-16PH90
GW62 12x16
100R2AT hose.
BW16-12FJ
GW09 16x12
BW16-16FJ
GW09 16x16
BW16-16FJ45T
GW25 16x16
BW16-16FJ90T
GW26 16x16
BW16-16MJ
GW08 16x16
BW16-16MP
GW01 16x16
BW16-16OF45T
GW31 16x16
For thread identification and hose I.D. only. Dimensions of the couplings may vary from manufacturer to manufacturer. Check hose cut off factor and tube drop carefully!
101BW-12-12
101BW-12-8
101BW-16-12
101BW-16-16
101BW-20-20
101BW-24-24
101BW-32-32
101BW-8-8
103BW-12-12
103BW-16-12
103BW-16-16
103BW-20-20
103BW-8-8
105BW-16-16
106BW-10-8
106BW-12-12
106BW-12-16
106BW-12-8
106BW-14-12
106BW-16-12
106BW-16-16
106BW-20-16
106BW-20-20
106BW-24-20
106BW-24-24
106BW-32-32
106BW-6-8
106BW-8-8
115BW-12-12
115BW-16-12
115BW-16-16
115BW-20-16
115BW-20-20
115BW-24-24
115BW-32-32
115BW-8-8
116BW-12-12
116BW-16-12
116BW-16-16
116BW-20-20
117BW-12-12
117BW-16-12
117BW-16-16
117BW-20-16
117BW-20-20
117BW-24-24
117BW-32-32
118BW-12-12
118BW-16-16
118BW-20-20
119BW-12-12
119BW-16-12
119BW-16-16
119BW-20-16
119BW-20-20
119BW-24-24
119BW-32-32
119BW-8-8
126BW-12-12
126BW-16-16
126BW-20-20
127BW-12-12
127BW-16-16
127BW-20-16
127BW-20-20
137BW-10-8
137BW-12-12
137BW-16-16
137BW-8-8
139BW-10-8
139BW-12-12
139BW-16-16
GW01 12x12
GW01 8x12
GW01 12x16
GW01 16x16
GW01 20x20
GW01 24x24
GW01 32x32
GW01 8x8
GW08 12x12
GW08 12x16
GW08 16x16
GW08 20x20
GW08 8x8
GW11 16x16
GW09 8x10
GW09 12x12
GW09 16x12
GW09 8x12
GW09 12x14
GW09 12x16
GW09 16x16
GW09 16x20
GW09 20x20
GW09 20x24
GW09 24x24
GW09 32x32
GW09 8x6
GW09 8x8
GW47 12x12
GW47 12x16
GW47 16x16
GW47 16x20
GW47 20x20
GW47 24x24
GW47 32x32
GW47 8x8
GW48 12x12
GW48 12x16
GW48 16x16
GW48 20x20
GW50 12x12
GW50 12x16
GW50 16x16
GW50 16x20
GW50 20x20
GW50 24x24
GW50 32x32
GW52 12x12
GW52 16x16
GW52 20x20
GW53 12x12
GW53 12x16
GW53 16x16
GW53 16x20
GW53 20x20
GW53 24x24
GW53 32x32
GW53 8x8
GW49 12x12
GW49 16x16
GW49 20x20
GW51 12x12
GW51 16x16
GW51 16x20
GW51 20x20
GW25 8x10
GW25 12x12
GW25 16x16
GW25 8x8
GW26 8x10
GW26 12x12
GW26 16x16
Couplamatic Systems Inc. Hydraulic Catalog 4010.
J-9
Bulk Hose
R5 Series and T Series & Weatherhead
Cross Reference
Cross Reference
F
G
Adapters
H
Fabrication Equipment
T33 6X6
T18 6X6
T19 6X6
T20 6X6
T04 6X6
T31 6X6
T30 6X6
T30 6X8
T01 8X6
T01 8X8
T10 8X8
T08 8X8
T08 8X10
T09 8X8
T09 8X10
T27 8X8
T26 8X8
T26 8X10
T25 8X8
T25 8X10
T32 8X8
T33 8X8
T04 8X8
T31 8X8
T30 8X8
T30 8X10
T01 12X12
T08 12X12
T09 12X12
T27 12X12
T26 12X12
T25 12X12
T32 12X12
T31 12X12
T30 12X12
T01 16X16
T08 16X16
T09 16X16
T27 16X16
T26 16X16
T25 16X16
T32 16X16
T31 16X16
T30 16X16
Reusables, Pushon, Acces.
06E-A66
06E-B06
06E-B46
06E-B66
06E-J06
06E-L66
06E-S66
06E-S68
08E-106
08E-108
08E-358
08E-508
08E-510
08E-608
08E-610
08E-648
08E-668
08E-670
08E-688
08E-690
08E-A28
08E-A68
08E-J08
08E-L68
08E-S68
08E-S70
12E-112
12E-512
12E-612
12E-652
12E-672
12E-692
12E-A32
12E-L72
12E-S72
16E-116
16E-516
16E-616
16E-656
16E-676
16E-696
16E-A36
16E-L76
16E-S76
E
J
Cross Reference
T01 3X2
T01 3X4
T09 3X4
T01 4X2
T01 4X4
T01 4X6
T10 4X4
T08 4X4
T08 4X6
T09 4X4
T09 4X5
T09 4X6
T27 4X4
T26 4X4
T26 4X5
T25 4X4
T32 4X4
T32 4X6
T33 4X4
T18 4X4
T18 4X5
T19 4X4
T20 4X4
T04 4X4
T31 4X4
T30 4X4
T30 4X6
T01 5X4
T01 5X6
T07 5X6
T08 5X5
T09 5X5
T09 5X6
T26 5X6
T25 5X6
T32 5X6
T18 5X5
T04 5X4
T31 5X6
T30 5X6
T01 6X4
T01 6X6
T01 6X8
T10 6X6
T07 6X6
T23 6X6
T08 6X6
T08 6X8
T09 6X6
T09 6X8
T27 6X6
T26 6X6
T26 6X8
T25 6X6
T32 6X6
T32 6X8
Refrigerant
03E-102
03E-104
03E-604
04E-102
04E-104
04E-106
04E-354
04E-504
04E-506
04E-604
04E-605
04E-606
04E-644
04E-664
04E-665
04E-684
04E-A24
04E-A26
04E-A64
04E-B04
04E-B05
04E-B44
04E-B64
04E-J04
04E-L64
04E-S64
04E-S66
05E-104
05E-106
05E-406
05E-505
05E-605
05E-606
05E-666
05E-686
05E-A26
05E-B05
05E-J04
05E-L66
05E-S66
06E-104
06E-106
06E-108
06E-356
06E-406
06E-466
06E-506
06E-508
06E-606
06E-608
06E-646
06E-666
06E-668
06E-686
06E-A26
06E-A28
D
R501 4X2
R501 4X4
R508 4X4
R509 4X4
R526 4X4
R525 4X4
R518 4X4
R520 4X4
R501 5X4
R508 5X5
R509 5X5
R526 5X5
R525 5X5
R518 5X5
R520 5X5
R501 6X4
R501 6X6
R507 6X6
R523 6X6
R508 6X6
R509 6X6
R509 6X8
R526 6X6
R525 6X6
R18 6X6
R520 6X6
R501 8X6
R501 8X8
R508 8X8
R509 8X8
R526 8X8
R525 8X8
R518 8X8
R520 8X8
R501 10X8
R508 10X10
R509 10X8
R509 10X10
R526 10X10
R525 10X10
R501 12X12
R507 12X12
R508 12X12
R509 12X12
R526 12X12
R525 12X12
R501 16X16
R508 16X16
R509 16X16
R501 20X20
R509 20X20
R501 24X24
R509 24X24
R501 32X32
R509 32X32
CSI
T Series
Thermoplastic
06904E-102
06904E-104
06904E-504
06904E-604
06904E-664
06904E-684
06904E-B04
06904E-E04
06905E-104
06905E-505
06905E-605
06905E-665
06905E-685
06905E-B05
06905E-E05
06906E-104
06906E-106
06906E-406
06906E-466
06906E-506
06906E-606
06906E-608
06906E-666
06906E-686
06906E-B06
06906E-E06
06908E-106
06908E-108
06908E-508
06908E-608
06908E-668
06908E-688
06908E-B08
06908E-E08
06910E-108
06910E-510
06910E-608
06910E-610
06910E-670
06910E-690
06912E-112
06912E-412
06912E-512
06912E-612
06912E-672
06912E-692
06916E-116
06916E-516
06916E-616
06920E-120
06920E-620
06924E-124
06924E-624
06932E-132
06932E-632
Weatherhead
E Series
C
CSI
T Series
Grip Crimp
Weatherhead
E Series
B
CSI
R5 Series
Cross Reference
Vari-Crimp
Weatherhead
069 Series
A
Cross Reference Chart:
K
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
J-10
Cross Reference Chart: Grip-Crimp & Parker Couplings
Parker
10143-12-10
10143-12-12
10143-12-16
10143-12-8
10143-16-12
10143-16-16
10143-20-20
10143-24-24
10143-32-32
10143-2-4
10143-4-4
10143-4-6
10143-4-8
10143-6-4
10143-6-6
10143-6-8
10143-8-10
10143-8-12
10143-8-4
10143-8-6
10143-8-8
10243-8-6
10243-12-12
10243-2-4
10243-4-4
10243-4-6
10243-6-6
10243-8-8
10343-10-10
10343-10-12
10343-10-6
10343-10-8
10343-12-10
10343-12-12
10343-12-8
10343-14-12
10343-14-16
10343-16-12
10343-16-16
10343-20-20
10343-24-24
10343-4-4
10343-5-4
10343-6-4
10343-6-6
10343-8-10
10343-8-6
10343-8-8
10443-12-12
10443-6-6
10543-10-10
10543-10-6
10543-10-8
10543-10-12
10543-12-12
10543-12-8
10543-12-10
10543-16-16
10543-4-4
10543-5-4
10543-6-4
10543-6-6
10543-8-10
10543-8-6
10543-8-8
10643-10-10
10643-10-12
10643-10-6
10643-10-8
10643-12-10
10643-12-12
10643-12-16
10643-12-6
10643-12-8
10643-14-12
10643-16-8
10643-16-12
10643-16-16
Grip
Crimp
GC01-10X12
GC01-12X12
GC01-16X12
GC01-8X12
GC01-12X16
GC01-16X16
GC01-20X20
GC01-24X24
GC01-32X32
GC01-4X2
GC01-4X4
GC01-6X4
GC01-8x4
GC01-4X6
GC01-6X6
GC01-8X6
GC01-10X8
GC01-12X8
GC01-4X8
GC01-6X8
GC01-8X8
GC02-6X8
GC02-12X12
GC02-4X2
GC02-4X4
GC02-6X4
GC02-6X6
GC02-8X8
GC08-10X10
GC08-12X10
GC08-6X10
GC08-8X10
GC08-10X12
GC08-12X12
GC08-8X12
GC08-12X14
GC08-16x14
GC08-12X16
GC08-16X16
GC08-20X20
GC08-24X24
GC08-4X4
GC08-4X5
GC08-4X6
GC08-6X6
GC08-10X8
GC08-6X8
GC08-8X8
GC06-12x12
GC06-6X6
GC11-10x10
GC11-6x10
GC11-8X10
GC11-12x10
GC11-12X12
GC11-8x12
GC11-10X12
GC11-16X16
GC11-4X4
GC11-4X5
GC11-4X6
GC11-6X6
GC11-10x8
GC11-6X8
GC11-8X8
GC09-10X10
GC09-12X10
GC09-6X10
GC09-8X10
GC09-10X12
GC09-12X12
GC09-16X12
GC09-6x12
GC09-8X12
GC09-12X14
GC09-8x16
GC09-12X16
GC09-16X16
Parker
10643-20-16
10643-20-20
10643-24-24
10643-32-32
10643-4-4
10643-4-6
10643-5-4
10643-6-4
10643-6-6
10643-6-8
10643-8-10
10643-8-6
10643-8-8
10743-12-12
10743-16-16
10743-20-20
10743-4-4
10743-6-6
10743-8-6
10743-8-8
10843-12-12
10843-6-4
10843-6-6
10G43-10-8
10G43-12-12
10G43-6-6
10G43-8-6
10G43-8-8
10L43-10-8
10L43-12-12
10L43-6-6
10L43-8-6
10L43-8-8
11143-10-8
11143-12-12
11143-16-16
11143-4-4
11143-5-4
11143-5-6
11143-6-6
11143-8-8
11343-12-12
11343-16-16
11343-2-4
11343-4-4
11343-4-6
11343-6-4
11343-6-6
11343-6-8
11343-8-6
11343-8-8
11543-12-8
11543-12-12
11543-16-12
11543-16-16
11543-20-16
11543-20-20
11543-8-8
11743-12-8
11743-12-12
11743-16-12
11743-16-16
11743-20-16
11743-20-20
11743-8-8
11943-12-8
11943-12-12
11943-16-12
11943-16-16
11943-20-16
11943-20-20
11943-8-8
11C43-12-6
11C43-14-6
11C43-16-8
11L43-12-12
11L43-4-4
11L43-6-6
Grip
Crimp
GC09-16x20
GC09-20X20
GC09-24X24
GC09-32X32
GC09-4X4
GC09-6X4
GC09-4X5
GC09-4X6
GC09-6X6
GC09-8X6
GC09-10X8
GC09-6X8
GC09-8X8
GC05-12X12
GC05-16X16
GC05-20X20
GC05-4X4
GC05-6X6
GC05-6X8
GC05-8X8
GC07-12X12
GC07-4X6
GC07-6X6
GC12-8X10
GC12-12X12
GC12-6X6
GC12-6X8
GC12-8X8
GC15-8X10
GC15-12X12
GC15-6X6
GC15-6X8
GC15-8X8
GC28-8X10
GC28-12X12
GC28-16X16
GC28-4X4
GC28-4X5
GC28-6X5
GC28-6X6
GC28-8X8
GC04-12X12
GC04-16X16
GC04-4X2
GC04-4X4
GC04-6X4
GC04-4X6
GC04-6X6
GC04-8X6
GC04-6X8
GC04-8X8
GC47-8x12
GC47-12X12
GC47-12X16
GC47-16X16
GC47-16X20
GC47-20X20
GC47-8X8
GC50-8x12
GC50-12x12
GC50-12x16
GC50-16x16
GC50-16x20
GC50-20X20
GC50-8x8
GC53-8x12
GC53-12x12
GC53-12x16
GC53-16x16
GC53-16x20
GC53-20X20
GC53-8x8
GC45-6X12
GC45-6X14
GC45-8X16
GC14-12X12
GC14-4X4
GC14-6X6
Parker
11L43-8-6
11L43-8-8
12843-3-4
12843-4-4
12843-4-6
12843-5-4
12843-5-6
12843-6-6
12843-7-6
12843-8-8
13743-10-10
13743-10-8
13743-12-10
13743-12-12
13743-16-12
13743-16-16
13743-20-20
13743-4-4
13743-5-4
13743-5-6
13743-6-4
13743-6-6
13743-8-6
13743-8-8
13943-10-8
13943-10-10
13943-10-12
13943-12-10
13943-12-12
13943-16-12
13943-16-16
13943-20-20
13943-4-4
13943-4-6
13943-5-4
13943-5-6
13943-6-4
13943-6-6
13943-8-6
13943-8-8
14143-10-10
14143-10-8
14143-12-12
14143-16-16
14143-4-4
14143-5-4
14143-6-4
14143-6-6
14143-8-6
14143-8-8
16743-4-4
16743-4-6
16743-5-4
16743-5-6
16743-6-6
16743-7-6
16743-8-8
16943-3-4
16943-4-4
16943-4-6
16943-5-4
16943-5-6
16943-6-6
16943-7-6
16943-8-8
17943-6-6
19243-10-10
19243-12-12
19243-16-16
19243-20-20
19243-4-4
19243-6-6
19243-8-6
19243-8-8
1B143-12-12
1B143-4-4
1B143-6-6
1B143-8-8
Grip
Crimp
GC14-6X8
GC14-8X8
GC18-4x3
GC18-4X4
GC18-6x4
GC18-4X5
GC18-6X5
GC18-6X6
GC18-6x7
GC18-8X8
GC25-10X10
GC25-8X10
GC25-10X12
GC25-12X12
GC25-12X16
GC25-16X16
GC25-20X20
GC25-4X4
GC25-4X5
GC25-6X5
GC25-4X6
GC25-6X6
GC25-6X8
GC25-8X8
GC26-8X10
GC26-10X10
GC26-12x10
GC26-10X12
GC26-12X12
GC26-12X16
GC26-16X16
GC26-20x20
GC26-4X4
GC26-6x4
GC26-4X5
GC26-6X5
GC26-4X6
GC26-6X6
GC26-6X8
GC26-8X8
GC27-10X10
GC27-8X10
GC27-12X12
GC27-16X16
GC27-4X4
GC27-4X5
GC27-4x6
GC27-6X6
GC27-6X8
GC27-8X8
GC19-4X4
GC19-6x4
GC19-4X5
GC19-6X5
GC19-6X6
GC19-6x7
GC19-8X8
GC20-4x3
GC20-4X4
GC20-6x4
GC20-4X5
GC20-6X5
GC20-6X6
GC20-6x7
GC20-8X8
GC23-6X6
GC10-10X10
GC10-12X12
GC10-16X16
GC10-20X20
GC10-4X4
GC10-6X6
GC10-6x8
GC10-8X8
GC43-12X12
GC43-4X4
GC43-6X6
GC43-8X8
Parker
1B243-10-10
1B243-12-12
1B243-16-16
1B243-4-4
1B243-6-6
1B243-8-8
1C343-10-6
1C343-12-6
1C343-15-8
1C343-18-10
1C343-22-12
1C343-28-16
1C343-6-4
1C343-8-4
1C443-10-4
1C443-10-6
1C443-12-6
1C443-15-8
1C443-18-10
1C443-22-12
1C443-8-4
1C543-10-6
1C543-12-6
1C543-15-8
1C543-18-10
1C543-8-4
1C943-10-4
1C943-10-6
1C943-12-6
1C943-14-6
1C943-16-8
1C943-20-10
1C943-20-12
1C943-25-12
1C943-30-16
1C943-8-4
1D043-10-6
1D043-12-6
1D043-15-8
1D043-18-10
1D043-22-12
1D043-8-4
1D243-10-4
1D243-12-6
1D243-14-6
1D243-16-8
1D243-20-10
1D243-8-4
1D943-12-12
1D943-4-4
1D943-6-6
1D943-8-8
1FU43-12-12
1FU43-16-16
1FU43-4-4
1FU43-6-6
1FU43-8-8
1GJ43-4-4
1GJ43-4-6
1J043-10-10
1J043-10-8
1J043-12-8
1J043-12-12
1J043-16-16
1J043-4-4
1J043-6-6
1J043-8-6
1J043-8-8
1J143-10-10
1J143-10-8
1J143-12-12
1J143-16-16
1J143-4-4
1J143-6-4
1J143-6-6
1J143-8-6
1J143-8-8
1J543-12-12
Grip
Crimp
Parker
GC46-10X10
GC46-12X12
GC46-16X16
GC46-4X4
GC46-6X6
GC46-8X8
GC37-6X10
GC37-6X12
GC37-8X15
GC37-10X18
GC37-12X22
GC37-16X28
GC37-4X6
GC37-4X8
GC41-4X10
GC41-6X10
GC41-6X12
GC41-8X15
GC41-10X18
GC41-12X22
GC41-4X8
GC44-6X10
GC44-6X12
GC44-8X15
GC44-10X18
GC44-4X8
GC38-4X10
GC38-6X10
GC38-6X12
GC38-6X14
GC38-8X16
GC38-10X20
GC38-12X20
GC38-12X25
GC38-16X30
GC38-4X8
GC66-6x10
GC66-6x12
GC66-8x15
GC66-10X18
GC66-12x22
GC66-4x8
GC67-4x10
GC67-6x12
GC67-6X14
GC67-8x16
GC67-10X20
GC67-4x8
GC36-12X12
GC36-4X4
GC36-6X6
GC36-8X8
GC40-12X12
GC40-16x16
GC40-4X4
GC40-6X6
GC40-8X8
GC03-4X8
GC03-6X8
GC29-10X10
GC29-8X10
GC29-8x12
GC29-12X12
GC29-16x16
GC29-4X4
GC29-6X6
GC29-6X8
GC29-8X8
GC33-10X10
GC33-8X10
GC33-12X12
GC33-16X16
GC33-4X4
GC33-4X6
GC33-6X6
GC33-6X8
GC33-8X8
GC34-12x12
This cross reference is for thread identification and hose inside diameter only. Exact dimensions of the couplings may vary from manufacturer to manufacturer.
Please check hose cut off factor, tube length, and tube drop carefully!
Couplamatic Systems Inc. Hydraulic Catalog 4010.
J-11
1J543-16-16
1J543-20-20
1J543-4-4
1J543-6-6
1J543-8-6
1J543-8-8
1J743-10-10
1J743-10-12
1J743-10-8
1J743-12-10
1J743-12-12
1J743-16-12
1J743-16-16
1J743-20-20
1J743-4-4
1J743-6-4
1J743-6-6
1J743-6-8
1J743-8-6
1J743-8-8
1J943-10-10
1J943-10-12
1J943-10-8
1J943-12-10
1J943-12-12
1J943-16-12
1J943-16-16
1J943-20-20
1J943-4-4
1J943-4-6
1J943-6-4
1J943-6-6
1J943-6-8
1J943-8-6
1J943-8-8
1JS43-10-10
1JS43-10-12
1JS43-10-8
1JS43-12-8
1JS43-12-10
1JS43-12-12
1JS43-16-12
1JS43-16-16
1JS43-20-20
1JS43-4-4
1JS43-4-6
1JS43-6-4
1JS43-6-6
1JS43-6-8
1JS43-8-4
1JS43-8-6
1JS43-8-8
1L943-12-12
1L943-16-16
1L943-4-4
1L943-6-6
1L943-8-8
1MU43-4-4
1MU43-6-6
1MU43-8-8
1S243-4-4
1S243-12-12
1UT43-12-12
1UT43-4-4
1UT43-6-6
1UT43-8-8
1XU43-10-10
1XU43-12-12
1XU43-16-16
1XU43-20-20
Grip
Crimp
GC34-16x16
GC34-20x20
GC34-4x4
GC34-6x6
GC34-6x8
GC34-8x8
GC31-10X10
GC31-12x10
GC31-8X10
GC31-10X12
GC31-12X12
GC31-12X16
GC31-16X16
GC31-20x20
GC31-4X4
GC31-4X6
GC31-6X6
GC31-8x6
GC31-6X8
GC31-8X8
GC32-10X10
GC32-12x10
GC32-8X10
GC32-10X12
GC32-12X12
GC32-12X16
GC32-16X16
GC32-20x20
GC32-4X4
GC32-6x4
GC32-4X6
GC32-6X6
GC32-8x6
GC32-6X8
GC32-8X8
GC30-10X10
GC30-12X10
GC30-8X10
GC30-8x12
GC30-10X12
GC30-12X12
GC30-12x16
GC30-16X16
GC30-20x20
GC30-4X4
GC30-6x4
GC30-4X6
GC30-6X6
GC30-8x6
GC30-4x8
GC30-6X8
GC30-8X8
GC24-12X12
GC24-16X16
GC24-4X4
GC24-6X6
GC24-8X8
GC39-4X14
GC39-6X18
GC39-8X22
GC16-4x4
GC16-12x12
GC35-12X12
GC35-4X4
GC35-6X6
GC35-8X8
GC39-10X24
GC39-12X30
GC39-16X33
GC39-20X36
GripCrimp
Gates
GripCrimp
Gates
GripCrimp
Gates
Grip Crimp
G
Adapters
H
Fabrication Equipment
J
Cross Reference
K
Thread Identification
* Does not have groove for optional O-Ring
F
J-12
Reusables, Pushon, Acces.
Couplamatic Systems Inc. Hydraulic Catalog 4010.
E
For thread identification and hose I.D. only. Dimensions of the couplings may vary from manufacturer to manufacturer. Check hose cut off factor and tube drop carefully!
Refrigerant
GC30-6X8
GC31-6X8
GC33-6X8
GC34-6x8
GC32-6X8
GC09-6X8
GC25-6X8
GC26-6X8
GC02-6X8
GC11-6X8
GC12-6X8
GC15-6X8
GC29-6X8
GC08-6X8
GC01-6X8
GC04-6X8
GC14-6X8
GC30-8X10
GC31-8X10
GC33-8X10
GC32-8X10
GC09-8X10
GC25-8X10
GC27-8X10
GC26-8X10
GC11-8X10
GC12-8X10
GC15-8X10
GC28-8X10
GC29-8X10
GC08-8X10
GC30-8X12
GC47-8x12
GC50-8x12
GC53-8x12
GC09-8X12
GC11-8x12
GC08-8X12
GC29-8X12
GC01-8X12
GC37-8X15
GC41-8X15*
GC44-8X15*
GC66-8x15
GC38-8X16
GC45-8X16
GC09-8X16
GC67-8x16
GC01-8X4
GC30-8x6
GC32-8x6
GC09-8X6
GC01-8X6
GC04-8X6
GC10-8X8*
GC43-8X8*
GC46-8X8*
GC30-8X8
GC31-8X8
GC33-8X8
GC34-8x8
GC32-8X8
GC40-8X8
GC09-8X8
GC25-8X8
GC27-8X8
GC26-8X8
GC39-8X22
GC47-8X8
GC53-8X8
GC02-8X8
GC05-8X8
GC11-8X8
GC36-8X8
GC35-8X8
GC12-8X8
GC15-8X8
GC28-8X8
GC29-8X8
GC18-8X8
GC20-8X8
GC08-8X8
GC01-8X8
GC04-8X8
GC14-8X8
D
6G-8FFORX
6G-8FFORX45
6G-8FFORX90L
6G-8FFORX90M
6G-8FFORX90S
6G-8FJX
6G-8FJX45
6G-8FJX90M
6G-8FP
6G-8MB
6G-8MBX
6G-8MBX90
6G-8MFFOR
6G-8MJ
6G-8MP
6G-8MPX
6G-8MPX90
8G-10FFORX
8G-10FFORX45
8G-10FFORX90L
8G-10FFORX90S
8G-10FJX
8G-10FJX45
8G-10FJX90L
8G-10FJX90M
8G-10MB
8G-10MBX
8G-10MBX90
8G-10MFA
8G-10MFFOR
8G-10MJ
8G-12FFORX
8G-12FL
8G-12FL45M
8G-12FL90M
8G-12FJX
8G-12MB
8G-12MJ
8G-12MFFOR
8G-12MP
8G-15FDLORX
8G-15FDLORX45
8G-15FDLORX90
8G-15MDL
8G-16FDHORX
8G-16FDHORX90
8G-16FJX
8G-16MDH
8G-4MP
8G-6FFORX
8G-6FFORX90S
8G-6FJX
8G-6MP
8G-6MPX
8G-8FBSPORX
8G-8FBSPORX45
8G-8FBSPORX90
8G-8FFORX
8G-8FFORX45
8G-8FFORX90L
8G-8FFORX90M
8G-8FFORX90S
8G-8FJISX
8G-8FJX
8G-8FJX45
8G-8FJX90L
8G-8FJX90M
8G-8FKX
8G-8FL
8G-8FL90
8G-8FP
8G-8FPX
8G-8MB
8G-8MBSPP
8G-8MBSPT
8G-8MBX
8G-8MBX90
8G-8MFA
8G-8MFFOR
8G-8MIX
8G-8MIX90
8G-8MJ
8G-8MP
8G-8MPX
8G-8MPX90
Thermoplastic
GC33-4X6
GC32-4X6
GC09-4X6
GC26-4X6
GC05-4X6
GC07-4X6
GC11-4X6
GC08-4X6
GC01-4X6
GC04-4X6
GC38-4X8
GC37-4X8*
GC41-4X8*
GC44-4X8*
GC67-4x8
GC66-4x8
GC01-4X8
GC37-6X10*
GC41-6X10*
GC44-6X10*
GC09-6X10
GC11-6x10
GC66-6x10
GC08-6X10
GC38-6X12
GC37-6X12*
GC44-6X12*
GC09-6X12
GC67-6x12
GC66-6x12
GC38-6X14
GC45-6X14
GC32-6x4
GC09-6X4
GC02-6X4
GC19-6x4
GC20-6x4
GC01-6X4
GC04-6X4
GC28-6X5
GC18-6X5
GC19-6X5
GC20-6X5
GC10-6X6*
GC43-6X6*
GC46-6X6*
GC30-6X6
GC31-6X6
GC33-6X6
GC34-6x6
GC32-6X6
GC40-6X6
GC09-6X6
GC25-6X6
GC27-6X6
GC26-6X6
GC39-6X18
GC02-6X6
GC05-6X6
GC07-6X6
GC22-6X6
GC23-6X6
GC11-6X6
GC36-6X6
GC35-6X6
GC12-6X6
GC15-6X6
GC28-6X6
GC29-6X6
GC18-6X6
GC19-6X6
GC20-6X6
GC08-6X6
GC01-6X6
GC04-6X6
GC14-6X6
GC06-6X6
GC18-6x7
GC19-6x7
GC20-6x7
GC10-6X8*
C
4G-6FFORX90L
4G-6FFORX90S
4G-6FJX
4G-6FJX90M
4G-6FPX
4G-6FSX
4G-6MB
4G-6MJ
4G-6MP
4G-6MPX
4G-8FDHORX
4G-8FDLORX
4G-8FDLORX45
4G-8FDLORX90
4G-8MDH
4G-8MDL
4G-8MP
6G-10FDLORX
6G-10FDLORX45
6G-10FDLORX90
6G-10FJX
6G-10MB
6G-10MDL
6G-10MJ
6G-12FDHORX
6G-12FDLORX
6G-12FDLORX90
6G-12FJX
6G-12MDH
6G-12MDL
6G-14FDHORX
6G-14FDHORX90
6G-4FFORX90S
6G-4FJX
6G-4FP
6G-4MIX45
6G-4MIX90
6G-4MP
6G-4MPX
6G-5MFA
6G-5MIX
6G-5MIX45
6G-5MIX90
6G-6FBSPORX
6G-6FBSPORX45
6G-6FBSPORX90
6G-6FFORX
6G-6FFORX45
6G-6FFORX90L
6G-6FFORX90M
6G-6FFORX90S
6G-6FJISX
6G-6FJX
6G-6FJX45
6G-6FJX90L
6G-6FJX90M
6G-6FKX
6G-6FP
6G-6FPX
6G-6FSX
6G-6FSX45
6G-6FSX90
6G-6MB
6G-6MBSPP
6G-6MBSPT
6G-6MBX
6G-6MBX90
6G-6MFA
6G-6MFFOR
6G-6MIX
6G-6MIX45
6G-6MIX90
6G-6MJ
6G-6MP
6G-6MPX
6G-6MPX90
6G-6MS
6G-7MIX
6G-7MIX45
6G-7MIX90
6G-8FBSPORX
Grip Crimp
GC33-16X16
GC34-16x16
GC32-16X16
GC40-16x16
GC09-16X16
GC25-16X16
GC27-16X16
GC26-16X16
GC39-16X33
GC47-16X16
GC50-16X16
GC53-16X16
GC05-16x16
GC11-16X16
GC35-16X16
GC28-16X16
GC29-16x16
GC08-16X16
GC01-16X16
GC04-16X16
GC09-16x20
GC47-16X20
GC50-16x20
GC53-16x20
GC37-16X28
GC38-16X30
GC10-20X20*
GC30-20x20
GC31-20x20
GC32-20x20
GC09-20X20
GC26-20x20
GC50-20X20
GC53-20X20
GC08-20X20
GC01-20X20
GC38-4X10
GC37-4X10*
GC44-4X10*
GC67-4x10
GC02-4X2
GC01-4X2
GC10-4X4*
GC43-4X4*
GC46-4X4*
GC30-4X4
GC31-4X4
GC33-4X4
GC34-4x4
GC32-4X4
GC40-4X4
GC09-4X4
GC25-4X4
GC27-4X4
GC26-4X4
GC39-4X14
GC02-4X4
GC05-4X4
GC11-4X4
GC36-4X4
GC35-4X4
GC28-4X4
GC29-4X4
GC18-4X4
GC20-4X4
GC08-4X4
GC01-4X4
GC04-4X4
GC09-4X5
GC25-4X5
GC26-4X5
GC11-4X5
GC28-4X5
GC18-4X5
GC20-4X5
GC08-4X5
GC10-4X6*
GC37-4X6*
GC30-4X6
GC31-4X6
B
16G-16FFORX90L
16G-16FFORX90M
16G-16FFORX90S
16G-16FJISX
16G-16FJX
16G-16FJX45
16G-16FJX90L
16G-16FJX90M
16G-16FKX
16G-16FL
16G-16FL45
16G-16FL90
16G-16FPX
16G-16MB
16G-16MBSPT
16G-16MFA
16G-16MFFOR
16G-16MJ
16G-16MP
16G-16MPX
16G-20FJX
16G-20FL
16G-20FL45
16G-20FL90
16G-28FDLORX
16G-30FDHORX
20G-20FBSPORX
20G-20FFORX
20G-20FFORX45
20G-20FFORX90S
20G-20FJX
20G-20FJX90M
20G-20FL45
20G-20FL90
20G-20MJ
20G-20MP
4G-10FDHORX
4G-10FDLORX
4G-10FDLORX90
4G-10MDH
4G-2FP
4G-2MP
4G-4FBSPORX
4G-4FBSPORX45
4G-4FBSPORX90
4G-4FFORX
4G-4FFORX45
4G-4FFORX90L
4G-4FFORX90M
4G-4FFORX90S
4G-4FJISX
4G-4FJX
4G-4FJX45
4G-4FJX90L
4G-4FJX90M
4G-4FKX
4G-4FP
4G-4FPX
4G-4MB
4G-4MBSPP
4G-4MBSPT
4G-4MFA
4G-4MFFOR
4G-4MIX
4G-4MIX90
4G-4MJ
4G-4MP
4G-4MPX
4G-5FJX
4G-5FJX45
4G-5FJX90M
4G-5MB
4G-5MFA
4G-5MIX
4G-5MIX90
4G-5MJ
4G-6FBSPORX
4G-6FDLORX
4G-6FFORX
4G-6FFORX45
Vari-Crimp
GC10-10X10*
GC46-10X10*
GC30-10X10
GC31-10X10
GC33-10X10
GC32-10X10
GC09-10X10
GC25-10X10
GC26-10X10
GC39-10X24
GC11-10x10
GC29-10X10
GC08-10X10
GC30-10X12
GC31-10X12
GC32-10X12
GC09-10X12
GC25-10X12
GC26-10X12
GC08-10X12
GC01-10X12
GC37-10X18
GC38-10X20
GC09-10X8
GC11-10x8
GC08-10X8
GC01-10X8
GC30-12X10
GC31-12x10
GC32-12x10
GC09-12X10
GC26-12x10
GC11-12X10
GC10-12X12*
GC43-12X12*
GC46-12X12*
GC30-12X12
GC31-12X12
GC33-12X12
GC34-12x12
GC32-12X12
GC40-12X12
GC09-12X12
GC25-12X12
GC27-12X12
GC26-12X12
GC39-12X30
GC47-12X12
GC50-12X12
GC53-12X12
GC02-12X12
GC05-12x12
GC07-12X12
GC11-12X12
GC36-12X12
GC35-12X12
GC28-12X12
GC29-12X12
GC08-12X12
GC01-12X12
GC04-12X12
GC06-12x12
GC09-12X14
GC08-12X14
GC30-12x16
GC09-12X16
GC47-12X16
GC50-12x16
GC53-12X16
GC08-12X16
GC01-12X16
GC37-12X22*
GC66-12x22
GC38-12X25
GC01-12X8
GC09-16X12
GC01-16X12
GC08-16X14
GC10-16X16*
GC46-16X16*
GC30-16X16
GC31-16X16
A
Gates
10G-10FBSPORX
10G-10FBSPORX90
10G-10FFORX
10G-10FFORX45
10G-10FFORX90L
10G-10FFORX90S
10G-10FJX
10G-10FJX45
10G-10FJX90S
10G-10FKX
10G-10MB
10G-10MFFOR
10G-10MJ
10G-12FFORX
10G-12FFORX45
10G-12FFORX90S
10G-12FJX
10G-12FJX45
10G-12FJX90S
10G-12MJ
10G-12MP
10G-18FDLORX
10G-20FDHORX
10G-8FJX
10G-8MB
10G-8MJ
10G-8MP
12G-10FFORX
12G-10FFORX45
12G-10FFORX90S
12G-10FJX
12G-10FJX90M
12G-10MB
12G-12FBSPORX
12G-12FBSPORX45
12G-12FBSPORX90
12G-12FFORX
12G-12FFORX45
12G-12FFORX90L
12G-12FFORX90M
12G-12FFORX90S
12G-12FJISX
12G-12FJX
12G-12FJX45
12G-12FJX90L
12G-12FJX90M
12G-12FKX
12G-12FL
12G-12FL45
12G-12FL90
12G-12FP
12G-12FPX
12G-12FSX
12G-12MB
12G-12MBSPP
12G-12MBSPT
12G-12MFA
12G-12MFFOR
12G-12MJ
12G-12MP
12G-12MPX
12G-12MS
12G-14FJX
12G-14MJ
12G-16FFORX
12G-16FJX
12G-16FL
12G-16FL45
12G-16FL90
12G-16MJ
12G-16MP
12G-22FDLORX
12G-22MDL
12G-25FDHORX
12G-8MP
16G-12FJX
16G-12MP
16G-14MJ
16G-16FBSPORX
16G-16FBSPORX90
16G-16FFORX
16G-16FFORX45
Bulk Hose
Cross Reference Chart: Grip-Crimp & Gates Couplings
Cross Reference Chart: 4GC, 6GC, and XP & Parker Couplings
Parker 71
4GC Series
Parker 71
4GC Series
Parker 78
10171-12-12
10171-12-16
10171-12-8
10171-16-12
10171-16-16
10171-20-20
10171-24-24
10171-32-32
10171-8-8
10371-10-8
10371-12-12
10371-14-12
10371-16-12
10371-16-16
10371-20-20
10371-8-8
10571-12-12
10571-16-16
10671-10-8
10671-12-12
10671-12-16
10671-12-8
10671-14-12
10671-16-12
10671-16-16
10671-20-16
10671-20-20
10671-24-20
10671-24-24
10671-32-32
10671-8-8
11571-12-8
11571-12-12
11571-16-12
11571-16-16
11571-20-16
11571-20-20
11571-24-20
11571-24-24
11571-32-32
11571-8-8
11671-12-12
11671-16-12
11671-16-16
11671-20-16
11671-20-20
11771-12-8
11771-12-12
11771-16-12
11771-16-16
11771-20-16
11771-20-20
11771-24-20
11771-24-24
11771-32-32
11771-8-8
11871-12-12
11871-16-12
11871-16-16
11871-20-20
11971-12-8
11971-12-12
11971-16-12
11971-16-16
11971-20-16
11971-20-20
11971-24-20
11971-24-24
11971-32-32
11971-8-8
12671-12-12
12671-16-16
4GC01-12X12
4GC01-16X12
4GC01-8X12
4GC01-12X16
4GC01-16X16
4GC01-20X20
4GC01-24X24
4GC01-32X32
4GC01-8X8
4GC08-8X10
4GC08-12X12
4GC08-12X14
4GC08-12X16
4GC08-16X16
4GC08-20X20
4GC08-8X8
4GC11-12X12
4GC11-16X16
4GC09-8X10
4GC09-12X12
4GC09-16X12
4GC09-8X12
4GC09-12X14
4GC09-12X16
4GC09-16X16
4GC09-16X20
4GC09-20X20
4GC09-20X24
4GC09-24X24
4GC09-32X32
4GC09-8X8
4GC47-8x12
4GC47-12X12
4GC47-12X16
4GC47-16X16
4GC47-16X20
4GC47-20X20
4GC47-20X24
4GC47-24X24
4GC47-32X32
4GC47-8X8
4GC48-12X12
4GC48-12X16
4GC48-16X16
4GC48-16X20
4GC48-20X20
4GC50-8x12
4GC50-12X12
4GC50-12X16
4GC50-16X16
4GC50-16X20
4GC50-20X20
4GC50-20X24
4GC50-24X24
4GC50-32X32
4GC50-8X8
4GC52-12X12
4GC52-12X16
4GC52-16X16
4GC52-20X20
4GC53-8x12
4GC53-12X12
4GC53-12X16
4GC53-16X16
4GC53-16X20
4GC53-20X20
4GC53-20X24
4GC53-24X24
4GC53-32X32
4GC53-8X8
4GC49-12X12
4GC49-16X16
12671-20-20
12771-12-12
12771-16-12
12771-16-16
12771-20-20
12U71-16-16
13771-10-8
13771-12-12
13771-16-12
13771-16-16
13771-20-20
13771-24-24
13771-8-8
13971-10-8
13971-12-12
13971-16-12
13971-16-16
13971-20-20
13971-24-24
13971-32-32
13971-8-8
16A71-12-12
16A71-16-12
16A71-16-16
16A71-20-16
16A71-20-20
16F71-12-12
16F71-16-16
16F71-20-20
16N71-12-12
16N71-16-12
16N71-16-16
16N71-20-16
16N71-20-20
18971-12-12
18971-16-16
1C971-16-8
1C971-25-12
1C971-30-16
1GU71-12-12
1GU71-16-16
1GU71-8-8
1J071-12-12
1J071-16-16
1J071-8-8
1J171-12-12
1J171-16-16
1J171-8-8
1J771-10-8
1J771-12-12
1J771-16-12
1J771-16-16
1J771-20-20
1J771-8-8
1J971-10-12
1J971-10-8
1J971-12-12
1J971-16-12
1J971-16-16
1J971-20-20
1J971-8-8
1JS71-10-12
1JS71-10-8
1JS71-12-12
1JS71-16-12
1JS71-16-16
1JS71-20-20
1JS71-8-8
4GC49-20X20
4GC51-12X12
4GC51-12X16
4GC51-16X16
4GC51-20X20
4GC56-16X16
4GC25-8X10
4GC25-12X12
4GC25-12X16
4GC25-16X16
4GC25-20X20
4GC25-24X24
4GC25-8X8
4GC26-8X10
4GC26-12X12
4GC26-12X16
4GC26-16X16
4GC26-20X20
4GC26-24X24
4GC26-32X32
4GC26-8X8
4GC60-12X12
4GC60-12X16
4GC60-16X16
4GC60-16X20
4GC60-20X20
4GC61-12X12
4GC61-16X16
4GC61-20X20
4GC62-12X12
4GC62-12X16
4GC62-16X16
4GC62-16X20
4GC62-20X20
4GC54-12X12
4GC54-16X16
4GC38-8X16
4GC38-12X25
4GC38-16X30
4GC10-12X12
4GC10-16X16
4GC10-8X8
4GC29-12X12
4GC29-16X16
4GC29-8X8
4GC33-12X12
4GC33-16X16
4GC33-8X8
4GC31-8X10
4GC31-12X12
4GC31-12X16
4GC31-16X16
4GC31-20X20
4GC31-8X8
4GC32-12X10
4GC32-8X10
4GC32-12X12
4GC32-12X16
4GC32-16X16
4GC32-20X20
4GC32-8X8
4GC30-12X10
4GC30-8X10
4GC30-12X12
4GC30-12X16
4GC30-16X16
4GC30-20X20
4GC30-8X8
10178-12-12
10178-16-16
10178-20-20
10178-24-24
101S6-32-32
10678-12-12
10678-16-12
10678-16-16
10678-20-20
10678-24-24
106S6-32-32
11578-12-12
11578-16-16
11778-12-12
11778-16-16
11978-12-12
11978-16-16
13978-12-12
13978-16-16
13978-20-20
14A78-20-20
14A78-24-24
14AS6-32-32
14F78-20-20
14F78-24-24
14FS6-32-32
14N78-20-20
14N78-24-24
14NS6-32-32
16A78-12-12
16A78-16-12
16A78-16-16
16A78-20-16
16A78-20-20
16A78-24-24
16AS6-32-32
16F78-12-12
16F78-16-12
16F78-16-16
16F78-20-16
16F78-20-20
16F78-24-24
16FS6-32-32
16N78-12-12
16N78-16-12
16N78-16-16
16N78-20-16
16N78-20-20
16N78-24-24
16NS6-32-32
1JS78-12-12
1JS78-16-16
1JS78-20-20
1J778-12-12
1J778-16-16
1J778-20-20
1J978-12-12
1J978-16-16
1J978-20-20
1XA78-12-12
1XA78-16-16
1XA78-20-20
1XA78-24-24
1XAS6-32-32
1XF78-12-12
1XF78-16-16
1XF78-20-20
1XF78-24-24
1XN78-12-12
1XN78-16-16
1XN78-20-20
1XN78-24-24
6GC Series
6GC01
6GC01
6GC01
6GC01
6GC01
6GC09
6GC09
6GC09
6GC09
6GC09
6GC09
6GC47
6GC47
6GC50
6GC50
6GC53
6GC53
6GC26
6GC26
6GC26
6GC47
6GC47
6GC47
6GC50
6GC50
6GC50
6GC53
6GC53
6GC53
6GC60
6GC60
6GC60
6GC60
6GC60
6GC60
6GC60
6GC61
6GC61
6GC61
6GC61
6GC61
6GC61
6GC61
6GC62
6GC62
6GC62
6GC62
6GC62
6GC62
6GC62
6GC30
6GC30
6GC30
6GC31
6GC31
6GC31
6GC32
6GC32
6GC32
6GC80
6GC80
6GC80
6GC80
6GC80
6GC81
6GC81
6GC81
6GC81
6GC82
6GC82
6GC82
6GC82
12x12
16x16
20x20
24x24
32x32
12x12
12x16
16x16
20x20
24x24
32x32
12x12
16x16
12x12
16x16
12x12
16x16
12x12
16x16
20x20
20x20
24x24
32x32
20x20
24x24
32x32
20x20
24x24
32x32
12x12
12x16
16x16
16x20
20x20
24x24
32x32
12x12
12x16
16x16
16x20
20x20
24x24
32x32
12x12
12x16
16x16
16x20
20x20
24x24
32x32
12x12
16x16
20x20
12X12
16X16
20X20
12X12
16X16
20X20
12x12
16x16
20x20
24x24
32x32
12x12
16x16
20x20
24x24
12x12
16x16
20x20
24x24
Parker 79
16A79-12-12
16A79-16-12
16A79-16-16
16A79-20-16
16A79-20-20
16A79-24-24
16F79-12-12
16F79-16-16
16F79-20-16
16F79-20-20
16F79-24-24
16N79-12-12
16N79-16-12
16N79-16-16
16N79-20-16
16N79-20-20
16N79-24-24
1JS79-12-12
1JS79-16-16
1JS79-20-20
1J779-12-12
1J779-16-16
1J779-20-20
1J979-12-12
1J979-16-16
1J979-20-20
1XA79-12-12
1XA79-16-16
1XA79-20-20
1XA79-24-24
1XF79-12-12
1XF79-16-16
1XF79-20-20
1XN79-12-12
1XN79-16-16
1XN79-20-20
1XN79-24-24
6GC Series
6GC60
6GC60
6GC60
6GC60
6GC60
6GC60
6GC61
6GC61
6GC61
6GC61
6GC61
6GC62
6GC62
6GC62
6GC62
6GC62
6GC62
6GC30
6GC30
6GC30
6GC31
6GC31
6GC31
6GC32
6GC32
6GC32
6GC80
6GC80
6GC80
6GC80
6GC81
6GC81
6GC81
6GC82
6GC82
6GC82
6GC82
12X12
12X16
16X16
16X20
20X20
24X24
12X12
16X16
16X20
20X20
24X24
12X12
12X16
16X16
16X20
20X20
24X24
12X12
16X16
20X20
12X12
16X16
20X20
12X12
16X16
20X20
12X12
16X16
20X20
24X24
12X12
16X16
20X20
12X12
16X16
20X20
24X24
Parker 73
10173-20-20
10173-24-24
10173-32-32
10673-20-20
10673-24-24
10673-32-32
13973-20-20
14A73-20-20
14F73-20-20
14N73-20-20
16A73-20-20
16A73-24-24
16A73-32-32
16F73-20-20
16F73-24-24
16F73-32-32
16N73-20-20
16N73-24-24
16N73-32-32
1JS73-20-20
1XA73-20-20
1XA73-24-24
1XF73-20-20
1XF73-24-24
1XN73-20-20
1XN73-24-24
This cross reference is for thread identification and hose inside diameter only. Exact dimensions of the couplings may vary from manufacturer to manufacturer.
Please check hose cut off factor, tube length, and tube drop carefully!
Couplamatic Systems Inc. Hydraulic Catalog 4010.
J-13
XP Series
XP01
XP01
XP01
XP09
XP09
XP09
XP26
XP47
XP50
XP53
XP60
XP60
XP60
XP61
XP61
XP61
XP62
XP62
XP62
XP30
XP80
XP80
XP81
XP81
XP82
XP82
20x20
24x24
32x32
20x20
24x24
32x32
20x20
20x20
20x20
20x20
20x20
24x24
32x32
20x20
24x24
32x32
20x20
24x24
32x32
20x20
20x20
24x24
20x20
24x24
20x20
24x24
5PCTS-4MP
5PCTS-6FJX
5PCTS-6MJ
K
Thread Identification
J-14
J
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Cross Reference
This cross reference is for thread identification and hose inside diameter only. Exact dimensions of the couplings may vary from manufacturer to
manufacturer. Please check hose cut off factor, tube length, and tube drop carefully!
H
3H-16116
Fabrication Equipment
12PCTS-12FJX
12PCTS-12MJ
12PCTS-12MP
12PCTS-12MPX
16PCTS-16FJX
16PCTS-16MP
SEWER HOSE
G
8PCTS-8MP
8PCTS-8MPX
Adapters
8PCTS-8MJ
F
6PCTS-6MJ
6PCTS-6MP
6PCTS-6MPX
6PCTS-8FJSX
6PCTS-8FJX45
6PCTS-8FJX90S
6PCTS-8MJ
6PCTS-8MP
8PCTS-10FJSX
8PCTS-8FFORX
8PCTS-8FFORX45
8PCTS-8FFORX90S
8PCTS-8FJSX
8PCTS-8FJX90S
Reusables, Pushon, Acces.
6PCTS-6FSX
E
6PCTS-6FFORX90S
6PCTS-6FFORX
6PCTS-6FFORX45
6PCTS-6FJX
6PCTS-6FJX45
6PCTS-6FJX90S
Refrigerant
6PCTS-4MP
D
3H-16116
4PCTS-4FJX90S
4PCTS-4MJ
4PCTS-4MP
4PCTS-4MPX
4PCTS-5FJSX
4PCTS-5FJX90S
4PCTS-6MJ
4PCTS-6FJX
4PCTS-6MP
4PCTS-4FFORX
4PCTS-4FFORX45
4PCTS-4FFORX90S
Thermoplastic
1JS55-6-6
1JS55-8-8
1L955-4-3
1L955-4-4
1L955-5-4
1L955-6-6
1L955-8-6
1L955-8-8
1L955-10-8
SEWER HOSE
10158-16-16
4PCTS-4FJSX
Couplamatic
Systems Inc.
3-02102
3-02544
3-03102
3-03544
3-03104
3-03144
3-04102
3-04244
3-04505
3-04544
3-04605
3-04644
3-04504
3-04104
3-04144
3-04545
3-04645
3-04506
3-04546
3-04106
3-04404
3-04444
3-04474
3-04845
3-05104
3-05106
3-05244
3-05406
3-05545
3-05546
3-05506
3-05476
3-06104
3-06246
3-06476
3-06406
3-06446
3-06546
3-06606
3-06646
3-06846
3-06848
3-06A06
3-06C46
3-06C76
3-06506
3-06106
3-06146
3-06548
3-06608
3-06648
3-06508
3-06108
3-08550
3-08408
3-08448
3-08478
3-08548
3-08648
3-08608
3-08610
3-08650
3-08508
3-08510
3-08106
3-08108
3-08148
3-08248
3-08850
3-12552
3-12512
3-12112
3-12152
3-16556
3-16116
C
1J955-6-6
1J955-8-8
1JS55-4-4
Gates
2PCTS-2MP
2PCTS-4FJSX
3PCTS-2MP
3PCTS-4FJSX
3PCTS-4MP
3PCTS-4MPX
4PCTS-2MP
4PCTS-4FPX
Grip Crimp
10655-4-2
10655-4-3
10655-4-4
10655-5-4
10655-5-5
10655-6-4
10655-6-5
10655-6-6
10655-8-6
10655-8-8
10655-10-8
10655-12-12
10655-16-16
10755-4-4
10755-4-5
10755-6-6
10755-8-8
10855-6-6
11355-4-3
11355-4-4
11355-6-6
11355-8-8
11355-12-12
13755-5-4
13755-6-6
13755-8-6
13755-8-8
13755-10-8
14155-5-4
14155-6-6
14155-8-6
14155-8-8
14155-10-8
1J755-4-4
1J755-6-6
1J755-8-8
1J955-4-4
Couplamatic
Systems Inc.
3-02102
3-03102
3-04102
3-03104
3-04104
3-05104
3-06104
3-04106
3-05106
3-06106
3-08106
3-06108
3-08108
3-12112
3-16116
3-03504
3-04504
3-04505
3-05506
3-06506
3-06508
3-08508
3-08510
3-12512
3-06C46
3-06C76
3-02544
3-03544
3-04544
3-04545
3-05545
3-04546
3-05546
3-06546
3-06548
3-08548
3-08550
3-12552
3-16556
3-04244
3-05244
3-06246
3-08248
3-06A06
3-03144
3-04144
3-06146
3-08148
3-12152
3-04605
3-06606
3-06608
3-08608
3-08610
3-04845
3-06846
3-06848
3-08848
3-08850
3-04444
3-06446
3-08448
3-04474
3-05476
3-06476
3-08478
3-04404
3-05406
3-06406
3-08408
3-03644
3-04644
3-04645
3-06646
3-06648
3-08648
3-08650
B
3H-12112
3H-16116
Parker
10155-2-2
10155-2-3
10155-2-4
10155-4-3
10155-4-4
10155-4-5
10155-4-6
10155-6-4
10155-6-5
10155-6-6
10155-6-8
10155-8-6
10155-8-8
10155-12-12
10155-16-16
10355-4-3
10355-4-4
10355-5-4
10355-6-5
10355-6-6
10355-8-6
10355-8-8
10355-10-8
10355-12-12
Vari-Crimp
3903-05506
3903-05545
3903-05546
3903-05646
3903-06104
3903-06106
3903-06108
3903-06146
3903-06246
3903-06406
3903-06446
3903-06476
3903-06506
3903-06508
3903-06546
3903-06548
3903-06606
3903-06608
3903-06646
3903-06648
3903-06846
3903-06848
3903-06A06
3903-06C46
3903-06C76
3903-08106
3903-08108
3903-08148
3903-08248
3903-08408
3903-08448
3903-08478
3903-08508
3903-08510
3903-08548
3903-08550
3903-08608
3903-08610
3903-08648
3903-08650
3903-08848
3903-08850
3903-12112
3903-12152
3903-12512
3903-12552
3903-16116
3903-16556
SEWER HOSE
390H-12112
390H-16116
Couplamatic
Systems Inc.
3-02102
3-02544
3-03144
3-03244
3-03102
3-03104
3-03504
3-03544
3-03644
3-04102
3-04104
3-04106
3-04144
3-04244
3-04404
3-04444
3-04474
3-04504
3-04506
3-04505
3-04544
3-04545
3-04546
3-04605
3-04644
3-04645
3-04845
3-05104
3-05106
3-05244
3-05406
3-05476
3-05506
3-05545
3-05546
3-05646
3-06104
3-06106
3-06108
3-06146
3-06246
3-06406
3-06446
3-06476
3-06506
3-06508
3-06546
3-06548
3-06606
3-06608
3-06646
3-06648
3-06846
3-06848
3-06A06
3-06C46
3-06C76
3-08106
3-08108
3-08148
3-08248
3-08408
3-08448
3-08478
3-08508
3-08510
3-08548
3-08550
3-08608
3-08610
3-08648
3-08650
3-08848
3-08850
3-12112
3-12152
3-12512
3-12552
3-16116
3-16556
A
Synflex
3903-02102
3903-02544
3903-03144
3903-03244
3903-03102
3903-03104
3903-03504
3903-03544
3903-03644
3903-04102
3903-04104
3903-04106
3903-04144
3903-04244
3903-04404
3903-04444
3903-04474
3903-04504
3903-04506
3903-04505
3903-04544
3903-04545
3903-04546
3903-04605
3903-04644
3903-04645
3903-04845
3903-05104
3903-05106
3903-05244
Thermoplastic Couplings & Synflex, Parker, Gates
Bulk Hose
Cross Reference Chart:
The NPTF (IPT) male will mate with the NPTF or NPSM female. The NPTF (IPT) male has
tapered threads and a 30 degree inverted seat. The NPTF female has tapered threads and no
seat. The seal takes place by deformation of the threads. The NPSM female has straight
threads and a 30 degree inverted seat. The seal takes place on the 30 degree seat.
Nominal
Size
(in.)
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
No.
Threads
Per Inch
27
18
18
14
14
11-1/2
11-1/2
11-1/2
11-1/2
Female
Thread
I.D. (in.)
23/64
15/32
19/32
3/4
61/64
1-13/64
1-17/32
1-25/32
2-1/4
Male
Thread
O.D. (in.)
13/32
35/64
43/64
27/32
1-1/16
1-5/16
1-43/64
1-29/32
2-3/8
The O-ring boss male will mate with an O-ring boss female only. The female is generally found on ports. The male has straight threads and an O-ring. The female has straight
threads and a sealing face. The seal is made at the O-ring on the male and the sealing
face on the female.
Nominal
No.
Female
Male
O-Ring
Size
Threads
Thread
Thread
I.D.
Torus
(in.)
Per Inch
I.D. (in.)
O.D. (in.)
20
25/64
7/16
.351
.072
1/4
3/8
18
1/2
9/16
.468
.078
1/2
16
11/16
3/4
.644
.087
5/8
14
13/16
7/8
.755
.097
12
31/32
1-1/16
.924
.116
3/4
ORF SEAL
The SAE 45 degree flare male will mate with an SAE 45 degree flare female only.
The SAE male has straight threads and a 45 degree flare seat. The SAE female has straight
threads and a 45 degree flare seat. The seal is made on the 45 degree flare seat.
Nominal
Size
(in.)
1/4
5/16
3/8
1/2
No.
Threads
Per Inch
20
20
18
16
Female
Thread
I.D. (in.)
25/64
29/64
9/16
11/16
Male
Thread
O.D. (in.)
7/16
1/2
5/8
3/4
The SAE 45 degree inverted flare male will mate with an 42 degree inverted flare female
only. The male has straight threads and a 45 degree inverted flare. The female has straight
threads and a 42 degree inverted flare. The seal is made on the 45 degree flare seat on the
male and the 42 degree flare seat on the female.
Nominal
No.
Female
Male
Size
Threads
Thread
Thread
(in.)
Per Inch
I.D. (in.)
O.D. (in.)
1/4
24
25/64
7/16
5/16
20
29/64
1/2
3/8
18
37/64
5/8
1/2
18
45/64
3/4
The ORF Seal system consists of a flat, finished surface on the female connector’s flange and
a recessed O-Ring held in a circular groove on the male. The seal is created as the flange and
O-Ring make contact as the female nut screws onto the male thread. A secondary seal is made
as the male connector is drawn into contact with the flange. The back-up seal also prevents
extrusion of the O-Ring under extreme pressure. ORF provides a better seal in high-vibrating,
high-impulse or high-torque applications.
Nominal
Size I.D.
1/4
3/8
1/2
3/4
1
1-1/4
Female
Thread I.D.
33/64
5/8
3/4
1-13/32
1-23/64
1-39/64
Male
Thread O.D.
9/16
11/16
13/16
1-3/16
1-7/16
1-11/16
Split Flange couplings work well in high pressure or high vibration applications. A split flange
clamp is bolted to a machined port sealing the split flange head and O-ring to the port. There
are two typical styles: Code 61 & Code 62, with Code 62 for higher pressure applications.
The JIS 30 Degree flare is similar to the JIC 37 Degree. The only differences are that the
threads are a British straight thread(BSPP) and the sealing seat is 30 degrees. The seal is
made on the 30 degree seat.
The JIC 37 degree flare male will mate with a JIC female only. The JIC male has straight
threads and a 37 degree flare seat. The JIC female has straight threads and a 37 degree flare
seat. The seal is made on the 37 degree flare seat. (Chart in next column)
Nominal
No.
Female
Male
Size
Threads
Thread
Thread
(in.)
Per Inch
I.D. (in.)
O.D. (in.)
1/4
20
25/64
7/16
5/16
20
29/64
1/2
3/8
18
1/2
9/16
1/2
16
11/16
3/4
5/8
14
13/16
7/8
3/4
12
31/32
1-1/16
7/8
12
1-7/64
1-3/16
1
12
1-15/64
1-5/16
1-1/4
12
1-35/64
1-5/8
1-1/2
12
1-51/64
1-7/8
2
12
2-27/64
2-1/2
Couplamatic Systems Inc. Hydraulic Catalog 4010.
No. Threads
Per Inch
18
16
16
12
12
12
Nominal
Size
(in.)
1/4
3/8
1/2
3/4
1
K-1
Thread
Size
1/4-19
3/8-19
1/2-14
3/4-14
1-11
Female Thread
Thread
I.D. (in.)
1/2
5/8
25/32
1
1-1/4
Male Thread
Thread
O.D. (in.)
17/32
11/16
27/32
1-1/16
1-11/32
A
Bulk Hose
Male Thread
Thread
O.D. (mm)
14
18
22
24
30
33
D
Thermoplastic
Female Thread
Thread
I.D. (mm)
12.5
16.5
20.5
22.5
28.5
31.5
C
Thread
Size
M14x1.5
M18x1.5
M22x1.5
M24x1.5
M30x1.5
M33x1.5
Newton Meters
Torque
15-17
19-22
27-30
59-65
68-79
107-119
158-170
215-237
254-288
339-384
Grip Crimp
Nominal
Size
(mm)
6
9
12
16
19
25
Pound Inches
Torque
130-150
165-195
235-265
525-575
600-700
950-1050
1400-1500
1900-2100
2250-2550
3000-3400
B
Nut Dash
Size
-4
-5
-6
-8
-10
-12
-16
-20
-24
-32
The Female 30 Degree flare is similar to the JIC 37 Degree. The only differences are that
the threads are a Metric straight thread and the sealing seat is 30 degrees. The seal is
made on the 30 degree seat. This particular style of couplings is frequently referred to as a
‘Komatsu’ style connection.
Vari-Crimp
JIC and SAE Connection Torque Values
O-Ring Face Seal (ORF) Connection Torque Values
K
K-2
Thread Identification
inches x 25.4 = millimeters (mm)
inches x 2.54 = centimeters (cm)
feet x .3048 = meters (m)
yard x .9144 = meters (m)
psi x .0689 = bar
psi x .0069 = Megapascals (MPa)
millimeter x .0394 = inch (in)
centimeter x .3937 = inch (in)
meters x 3.281 = feet (ft)
meters x 1.0936 = yards (yd)
bar x 14.5 = psi
Megapascals x 145.0 = psi
J
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Metric Conversions
Cross Reference
12
14
16
18
20
22
24
26
30
36
42
H
10.6
12.5
14.5
16.5
18.5
20.5
22.5
24.5
28
34
40
Fabrication Equipment
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M26x1.5
M30x2.0
M36x2.0
M42x2.0
G
20
25
30
Male
Thread OD
(mm)
Adapters
18
22
28
Female
Thread ID
(mm)
F
15
6
8
10
12
14
16
Thread
Size
(Metric)
Torque Conversions
Reusables, Pushon, Acces.
6
8
10
12
Nominal
Size Heavy
(mm)
Newton Meters
Torque
24-26
33-39
51-57
81-89
117-127
153-173
180-200
Pound Inch = Pound Foot x 12
Pound Foot = Pound Inch x 0.083
Pound Inch = Newton Meter x 8.85
Pound Foot = Newton Meter x 0.737
Newton Meter = Pound Inch x 0.113
Newton Meter = Pound Foot x 1.356
DIN style couplings seal in several different configurations. The common male has a 24
degree included angle seat. Two of the female styles are represented above. The Female
DIN Light seals on globeseal, and the Female DIN Heavy seals on a 24 degree seat with
an O-ring. As expected the Female DIN Heavy is for higher pressure applications.
Nominal
Size Light
(mm)
Pound Inches
Torque
210-230
295-345
555-505
715-785
1035-1125
1350-1530
1590-1770
E
The British Standard Parralel Pipe Thread is similar to the NPSM pipe thread in that they
both seal on the 30 degree seat of the corresponding female fitting. BSPP and NPSM are
NOT interchangeable due to the fact that the thread angle differs. The BSPP thread angle
is 55 degrees, and the NPSM thread angle is 60 degrees.
Nut Dash
Size
-4
-6
-8
-10
-12
-16
-20
Refrigerant
The British Standard Tapered Pipe Thread is similar to the NPTF pipe thread in that they
both seal on the deformation of the threads. BSPT and NPTF are NOT interchangeable
due to the fact that the thread angle differs. The BSPT thread angle is 55 degrees, and the
NPTF thread angle is 60 degrees.
Hose Standards and Specifications:
Hose Part
Number
Page
SAE
DOT/FMVSS
MSHA
57MB-1
A-1 100R1AT
*
56MB-1
A-1 100R1AT
*
57MB-2
A-2 100R2AT
*
56MB-2
A-2 100R2AT
*
2SN
A-3
R16
USCG
ISO
EN
OTHER
ISO 1436
EN 853 Type 1SN
*
ISO 1436
EN 853 Type 2SN
A-3 100R16
*
ISO 11237-1 EN 857 Type 2SC
Ultra R16
A-4 100R16
*
ISO 11237-1 EN 857 Type 2SC
R17R
A-4 100R17
*
ISO 11237-1
R17
A-4 100R17
*
ISO 11237-1
HPI
A-5 100R17
*
HPIII
A-5 100R16
*
DH17
A-6 100R17
*
DH16
A-6 100R16
*
ISO 11237-1 EN 857 Type 2SC
DHEX16
A-6 100R16
*
ISO 11237-1 EN 857 Type 2SC
JH2
A-7
3319A
A-7 1000R3
*
104MB
A-7 100R4
*
58MBA
A-8 100R5
106 Type AII
(3/16" - 5/8")
HTR5
A-8 100R5
106 Type AII
(3/16" - 5/8")
H6H
A-9 100R6
RD7
A-9 100R7
ANSI 92.2
RD7NC
A-9 100R7
ANSI 92.2
RD7TL
A-10 100R7
ANSI 92.2
RD7TLNC
A-10 100R7
ANSI 92.2
H7
A-11 100R7
H7NC
A-11 100R7
H7TL
A-12 100R7
H7TLNC
A-12 100R7
HS8
A-12 100R8
HS8NC
A-13 100R8
SP580
A-13 100R12
*
RC12B
A-13 100R12
*
ISO 1307
EN 856 R12
DHEXR12
A-14 100R12
*
ISO 1307
EN 856 R12
RC13
A-14 100R13
*
ISO 1307
EN 856 R13
DHEXR13
A-14 100R13
*
ISO 1307
EN 856 R13
RC15
A-15 100R15
*
ISO 1307
4SH
A-15
*
ISO 1307
TR14
A-16 100R14
3284H
A-16
F204
A-16
025H
A-17
024H
A-17
026H
A-17
J1402A
A-17 J1402A
ISO 1307
EN 853 1ST
EN 854 R6
EN 856 R12
EN 856 4SH
R12 & R134A
106 Type All
Couplamatic Systems Inc. Hydraulic Catalog 4010.
DIN 74310
K-3
SAE
-2
-3
-4
-5
-6
-8
-10
-12
-16
-20
-24
-32
Temperature
Range (F)
57MB-1
A-1 100R1AT
2750
2250
2000
1250 1000
56MB-1
A-1 100R1AT
3250
2600
2325
1525 1275
57MB-2
A-2 100R2AT
5000
4000
3500 2750 2250 2000
-40 to +212
56MB-2
A-2 100R2AT
5000
4000
3500 2750 2250 2000
-40 to +212
2SN
A-3
5800
4800
4000 3625 3125 2400 1800 1300 1150
-40 to +212
R16
A-3 100R16
5800
5000
4250 3625 3125 2500
-40 to +212
Ultra R16
A-4 100R16
5800
5000
4250 3625 3125 2500
-58 to +275
R17R
A-4 100R17
3000
3000
3000
-40 to +212
R17
A-4 100R17
3000
3000
3000 3000 3000 3000
-40 to +212
HPI
A-5 100R17
3000
3000
3000
3000 3000
-40 to +212
HPIII
A-5 100R16
5000
4000
3500 2750 2250 2000
-40 to +212
DH17
A-6 100R17
3000
3000
3000 3000 3000 3000
-40 to +212
DH16
A-6 100R16
5800
5000
4250 3625 3125 2500
-40 to +212
DHEX16
A-6 100R16
5800
5000
4250 3625 3125 2500
-40 to +212
JH2
A-7
10000
10000
3319A
A-7 1000R3
1250
1125
104MB
A-7 100R4
58MBA
A-8 100R5
3000
3000
HTR5
A-8 100R5
3000
3000
H6H
A-9 100R6
400
RD7
A-9 100R7
2750
2500
2250
-40 to +212
RD7NC
A-9 100R7
2750
2500
2250
-40 to +212
RD7TL
A-10 100R7
2750
2500
2250
-40 to +212
2750
2500
2250
2750
2500
2250
2000
1250 1000
-40 to +212
1250 1000
-40 to +212
725
580
-40 to +212
-40 to +212
2250
2000 1750 1500
800
625
500
350
-40 to +212
2250
2000 1750 1500
800
625
500
350
-40 to +300
400
400
-40 to +212
2750
2500
2250
2000
-40 to +212
H7TLNC
A-12 100R7
2750
2500
2250
2000
-40 to +212
HS8
A-12 100R8
5000
4000
3500
-40 to +212
HS8NC
A-13 100R8
5000
4000
3500
-40 to +212
SP580
A-13 100R12
4000
4000 4000 3000 2500 2500
-40 to +250
RC12B
A-13 100R12
4000
4000 4000 3000 2500 2500
-40 to +250
DHEXR12 A-14 100R12
4000
4000 4000 3000 2500 2500
-40 to +250
A-14 100R13
5000 5000 5000 5000 5000
-40 to +250
DHEXR13 A-14 100R13
5000 5000 5000 5000 5000
-40 to +250
RC15
A-15 100R15
6090 6090 6090 6090
-40 to +250
4SH
A-15
6090 6090 5510 5075 4205 3625
-40 to +212
TR14
A-16 100R14
3284H
A-16
F204
A-16
500
500
500
350
-22 to +257
025H
A-17
300
300
300
300
300
-40 to +190
024H
A-17
300
300
300
300
300
-40 to +190
026H
A-17
300
300
300
300
300
-40 to +200
5000
3000
3000
2500
2250
1500
1100
900
300
300
300
-65 to +400
250
250
-40 to +200
Couplamatic Systems Inc. Hydraulic Catalog 4010.
K-4
K
J1402A
A-17 J1402A
225
-40 to +200
Note: Maximum working pressure of a hose assembly is the lesser of the rated pressure of the hose or the end connection.
Thread Identification
A-12 100R7
J
H7TL
Cross Reference
2000
H
2250
Fabrication Equipment
2500
G
2750
Adapters
A-11 100R7
F
H7NC
Reusables, Pushon, Acces.
-40 to +212
A-11 100R7
E
-40 to +212
Refrigerant
100
D
150
Thermoplastic
200
C
250
Grip Crimp
565
B
750
300
H7
RC13
3000 3000
900
Vari-Crimp
RD7TLNC A-10 100R7
-40 to +212
-40 to +212
1000
A
Hose Part
Number Page
Bulk Hose
Recommended Working Pressures (PSI) and Temperatures by hose type:
Coupling Codes and Configurations:
Series
xx01
xx02
xx03
xx04
xx05
xx06
xx07
xx08
xx09
xx10
xx11
xx12
xx13
xx14
xx15
xx16
xx17
xx18
xx19
xx20
xx21
xx22
xx23
xx24
xx25
xx26
xx27
xx28
xx29
xx30
xx31
xx32
xx33
xx34
xx35
xx36
xx37
xx38
xx39
xx40
xx41
xx42
xx43
xx44
xx45
xx46
xx47
xx48
xx49
xx50
xx51
xx52
xx53
Coupling Description
NPTF Solid Male
NPTF Solid Female
Solid Female Grease Tap
NPTF Swivel Male
NPSM Swivel Female
SAE 45° Solid Male
SAE 45° Swivel Female
JIC 37° Solid Male
JIC 37° Swivel Female
BSPP Swivel Female
ORB Solid Male
ORB Swivel Male
Hose Splicer
90° NPTF Swivel Male
ORB 90° Swivel Male
NPTF Swivel Female
JIC 37° 90° Swivel Female
Male Straight Inverted Flare
45° Bend Male Inverted Flare
90° Bend Male Inverted Flare
Standpipe Coupling
45° Bend SAE Swivel Female
90° Bend SAE Swivel Female
90° JIC/SAE Dual Seat Swivel Female (Med Drop)
45° JIC/SAE Dual Seat Swivel Female
90° JIC/SAE Dual Seat Swivel Female
90° JIC/SAE Dual Seat Swivel Female (Long Drop)
Tube Repair
ORF Solid Male
ORF Straight Tube Swivel Female
45° ORF Swivel Female
90° ORF Swivel Female (Short Drop)
90° ORF Swivel Female (Long Drop)
90° ORF Swivel Female (Med Drop)
BSPT Solid Male
BSPP Solid Male
DIN Universal Seat Female Swivel (Light)
DIN 24 degree Seat Female Swivel (Heavy)
Female Swivel 30 degree flare (Komatsu)
JIS 30 degree flare Swivel Female
DIN Universal Seat Female 45 degree Swivel (Light)
DIN 24 degree seat Female 45 Degree Swivel (Heavy)
BSPP Swivel Female 45 degree tube
DIN Universal Seat Female 90 degree Swivel (Light)
DIN 24 degree Seat Female 90 degree Swivel (Heavy)
BSPP Swivel Female 90 degree tube
Code 61 Split Flange Straight
Code 61 Split Flange 22.5 degree tube
Code 61 Split Flange 30 degree tube
Code 61 Split Flange 45 degree tube
Code 61 Split Flange 60 degree tube
Code 61 Split Flange 67.5 degree tube
Code 61 Split Flange 90 degree tube
Couplamatic Systems Inc. Hydraulic Catalog 4010.
Series
xx54
xx55
xx56
xx57
xx60
xx61
xx62
xx80
xx81
xx82
xx66
xx67
K-5
Coupling Description
Code 61 Split Flange 90 degree tube Long Drop
Code 61 Split Flange 100 degree tube
Code 61 Split Flange 110 degree tube
Code 61 Split Flange 135 degree tube
Code 62 Split Flange Straight
Code 62 Split Flange 45 degree tube
Code 62 Split Flange 90 degree tube
Extra Heavy Duty Flange Straight
Extra Heavy Duty Flange 45 degree tube
Extra Heavy Duty Flange 90 degree tube
Male DIN Solid 24° Seat (Light)
Male DIN Solid 24° Seat (Heavy)
A
Bulk Hose
Hose Assembly Guide:
B
Vari-Crimp
Use elbows or adapters to to maintain
bend radius and neat installation.
Use elbows, adapters, and routing
clamps to maintain bend radius and
ease of installation.
Route hose properly to avoid twisting.
Use proper length hose to maintain
adequate bend radius.
Use routing clamps to allow for correct
movement and avoid twisting.
D
Thermoplastic
Use elbows or adapters to to maintain
bend radius and neat installation.
C
Allow adequate free length for flexing.
Grip Crimp
Don’t install hose in a twisted position,
this dramatically decreases hose life.
E
Refrigerant
F
Reusables, Pushon, Acces.
G
Adapters
H
Fabrication Equipment
J
Cross Reference
K
K-6
Thread Identification
Couplamatic Systems Inc. Hydraulic Catalog 4010.
www.couplamatic.com

Similar documents

Fittings - Hydraulic House

Fittings - Hydraulic House BS - Brass Nut, Brass Nipple, Steel Shell VS - Vibra Seal thread sealant B - Brass Hose

More information

GC Compact cat.

GC Compact cat. with the strength and sealing integrity of a welded joint, the GC Flange is lighter, smaller and easier to install than an ANSI raised face or ring joint flange. The main characteristic of the flan...

More information