Breeze Catalog Driveline 092409

www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Driveline:
Note: Driveshafts come with pinion yoke with 2.5” square bolt
pattern. If using Mustang Cobra center section with 3.0” square
pattern, call us.
70032 Denny’s Driveshaft, MkI and MkII Roadster, All New, High
Speed Balanced, HD 1330 Series U-Joints w/o grease fitting, 28
Spline for T-5 and Tremec 3550. Includes Ford 8.8” Flange
Yoke. Made in USA.
$299.00
70040 Denny’s Driveshaft, MkI and MkII Roadster, All New, High
Speed Balanced, HD 1330 Series U-Joints w/o grease fitting, 31
Spline Yoke for Tremec TKO 500 & 600. Includes Ford 8.8”
Flange Yoke. Made in USA.
$299.00
70506 Denny’s Driveshaft, Coupe/Spyder GT, All New, High
Speed Balanced, HD 1330 Series U-Joints w/o grease fitting, 28
Spline for T-5 and Tremec 3550. Includes Ford 8.8” Flange
Yoke. Made in USA.
$299.00
70535 Denny’s Driveshaft, Coupe/Spyder GT, All New, High
Speed Balanced, HD 1330 Series U-Joints w/o grease fitting, 31
Spline Yoke for Tremec TKO 500 & 600. Includes Ford 8.8”
Flange Yoke. Made in USA.
$299.00
70533 Denny’s Driveshaft, MkIII Roadster, All New, High Speed
Balanced, HD 1330 Series U-Joints w/o grease fitting, 28 Spline
for T-5 and Tremec 3550. Includes Ford 8.8” Flange Yoke. Made
in USA.
$299.00
Note: In special case of using 1994-1995 bellhousing, order
70032.
70534 Denny’s Driveshaft, MkIII Roadster, All New, High Speed
Balanced, HD 1330 Series U-Joints w/o grease fitting, 31 Spline
Yoke for Tremec TKO 500 & 600. Includes Ford 8.8” Flange
Yoke. Made in USA.
Breeze Resource Guide and Price List rev. 57
printed 09/24/09, Page 1 of 10
$299.00
www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Driveline: (continued)
70607 Denny’s Driveshaft, MkIII Roadster, All New, High Speed
Balanced, HD Special 28 Spline Yoke for use with AOD
Automatic Transmission. Made in USA.
$339.00
70545 Denny’s Driveshaft, MkIII Roadster, All New, High Speed
Balanced, HD 31 Spline Yoke for 4.6 L Engine using T-45 or
3650 Transmission. Made in USA.
$299.00
30010 Bolt, 12mm Self Locking, High Torque, for Driveshaft to
Pinion Flange, OEM Ford
$2.25
70513 Micro-Click Clutch Cable Adjuster and Billet Aluminum
Quadrant Kit
$90.00
Spring-ball detents and a ball bearing race to prevent the clutch
cable action from rotating the adjuster. Clear anodized finish.
Made in USA.
70515 Micro-Click Clutch Cable Adjuster
$59.00
Our design is made specifically for the MkIII Roadster and retains
the Micro-Click detent and bearing feature while the threaded
boss seats directly on the FFR steel foot-box front wall. No drilling
or screws are required. Made in USA.
70530 Clutch Quadrant
$31.00
Replaces the factory Mustang self-adjusting unit. Can be
installed in two positions to take up more or less initial cable
slack. Constant stock radius. Made in USA.
35094 Flywheel, Billet Steel, 157-tooth, w balance weights for
zero, 28.2, and 50 oz.-in. applications.
Includes dowel pins. Requires pressure plate screws. SFI
approved. 24 lbs. Made in USA by Fidanza.
Breeze Resource Guide and Price List rev. 57
printed 09/24/09, Page 2 of 10
$275.00
www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Driveline: (continued)
35095 Flywheel, Aluminum, 157-tooth, w balance weights for
zero, 28.2, and 50 oz.-in. applications.
$375.00
Lighter weight means lower moment of inertia which allows
your engine to accelerate faster!
Includes dowel pins. Requires pressure plate screws. SFI
approved. 11 lbs. Made in USA by Fidanza.
35286 Fidanza Aluminum Flywheel and Carbon/Kevlar 10Spline Clutch Combo (use with T-5 or TKO-500
transmissions)
$595.00
Fidanza offers a special combo price on their Aluminum
Flywheel and Carbob/Kevlar Clutch. The lightweight
aluminum flywheel (11 lbs) comes with balance weights for
zero, 28.2 and 50 oz-in balanced small block Ford engine
applications and includes dowel pins.
The Fidanza 2.1 Performance Clutch Kit includes a pressure plate with 2400lb clamping force (OEM units
are 1700lbs) without being hard on the leg, release and pilot bearings and an alignment tool. Torque
rating is up to 530 ft-lb. This package price represents a $75.00 - $100.00 savings over the flywheel
($375.00) and clutch kit ($295.00 for 10 spline, $320.00 for 26 spline) ordered separately! Requires 6
each 30015 Pressure Plate Screws for installation.
35324 Fidanza Aluminum Flywheel and Carbon/Kevlar 26Spline Clutch Combo (use with TKO-600 transmissions)
$620.00
Same description as 35286 above but with a 26 spline clutch
disc to fit the TKO-600 Transmission input shaft.
35084 Clutch Cable, Aftermarket, Non-adjustable $34.00
30112 Circlip, Clutch Cable
Retainer
$2.00
30107 Shield, Clutch Fork
Cover
$44.00
with stainless attaching screw
(Ford List $46.58)
Breeze Resource Guide and Price List rev. 57
printed 09/24/09, Page 3 of 10
www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Driveline: (continued)
30154 Fork, Clutch Release,
OEM Ford
$26.00
30135 Stud, Clutch Fork Pivot,
OEM Ford
$19.00
614014 Bearing, Clutch Release
FC-65174 Bearing,
Transmission Input Shaft Pilot
32008 Flywheel Bolt Kit, ARP
30015 Screw/Washer, Pressure
Plate to Flywheel
Made in USA.
$11.99
$12.50
30173 Dowel Pin, Flywheel (3
per car)
$2.25
$29.95
(6 per car) M8 x 1.25 x 20mm for
Ford 5.0 compatible pressure
plates
$1.50
35230 M-6397-A302 Pressure
Plate Screw and Dowel Pin Kit
For dowel pin only order 30173.
For screw only order 30015.
$13.50
Breeze Resource Guide and Price List rev. 57
printed 09/24/09, Page 4 of 10
www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Driveline: (continued)
35102 Bellhousing, M-6392-E, Aluminum 302/ 351 to T-5
Transmission
$189.00
This is the stock Mustang 5.0 replacement and can be used to
mate 302 or 351 blocks to the T-5 Transmission. Weighs 11lb.
Includes clutch fork pivot ball stud. Takes the 30107 Clutch Fork
Cover.
35121 M-6392-R58 Cobra R Bellhousing
$190.00
70595 Bellhousing Kit, QuickTime RM6060, Steel, 302/351 to T5/ Tremec TKO Transmission
$425.00
This new steel bellhousing by QuickTime Inc is precision
manufactured in USA to reduce weight and eliminate installation
complexities common to other steel bellhousings.
Does not require run-out checking and adjustment for street applications. Lowest point is equivalent to the
bottom of the OEM mid-plate, so no trimming is required. This feature-packed kit includes the clutch fork
pivot, block plate, centering rings for T-5 and TKO transmissions, and all fasteners for transmission, block
and starter. The starter nose area is open. See 35248 for starter nose cover. There is no clutch fork cover
available. Weight is 22.5 lb. Finish is semi-gloss black powder-coated.
70633 Bellhousing Kit, QuickTime RM6065, Steel, Small Block
Ford to T-5/TKO/T-5 Transmission, SFI Approved
$455.00
Includes block plate and all fasteners. See 35248 for starter nose
cover.
35248 Starter Cover, Spun Aluminum for QuickTime RM6060
and RM6065
35221 RM 8030 QuickTime Steel Bellhousing, Small Block Ford
to T-56 Trans. Includes Fasteners
This new steel bellhousing by Quick Time Inc is precision
manufactured in USA to reduce weight and eliminate installation
complexities common to other steel bellhousings.
Breeze Resource Guide and Price List rev. 57
printed 09/24/09, Page 5 of 10
$27.00
$369.00
www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Driveline: (continued)
71018 EzePak Fasten-Driveline™
$48.00
Talk about handy! Here are all the external fasteners for your
driveline that are common to solid axle and IRS, with aluminum
bellhousing. 44 pieces include:
• Engine mount nuts and bolts
• Starter to bellhousing bolts
• Mid-plate to bellhousing bolts
• Bellhousing to engine bolts
• Transmission to bellhousing bolts
• Transmission mount nuts and bolts
• Pinion flange bolts
71041 EzePak Fasten Driveline™ for FFR Complete Kits
$20.00
Same as 71018 above, but without the pinion flange bolts and
engine mount nuts and bolts, which are supplied by Factory Five.
Note: For TKO, mention in special instructions and add $6.00.
35103 Super-Duty T-5 Transmission
$1,319.00
SHD World Class T-5 Transmission (M-7003-Z). 330ft-lb
capacity, 2.95 1st, .63 5th. 10 spline input accepts M-7560C302N HD Low Effort King Cobra Clutch, 28 spline output
35131 Tremec TKO-500 Transmission
$2,099.00
Tremec TKO-500 Transmission (M-7003-R58W). 3.27 1st, .68
5th. 10 spline input accepts M-7560-C302N HD Low Effort King
Cobra Clutch, 31 spline output. Requires M-6392-R58 aluminum
bellhousing or Quick Time steel bellhousing.
35130 Tremec TKO-600 Transmission
$2,199.00
Tremec TKO-600 Transmission (M-7003-R58H). 2.87 1st, .68
5th. 26 spline input (accepts #35293 clutch kit), 31 spline output.
Requires M-6392-R58 aluminum bellhousing or Quick Time steel
bellhousing.
35149 Mount, Transmission, Energy Suspension, Polyurethane,
Black
Includes transmission mount to frame fasteners. Made in USA.
Breeze Resource Guide and Price List rev. 57
printed 09/24/09, Page 6 of 10
$30.00
www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Driveline: (continued)
35066 HD Clutch Kit, M-7560C302N, Low Effort (use with T-5
and TKO-500 transmissions)
Includes clutch disk, pressure
plate, and release bearing.
$295.00
30153 Boot, Shifter to
Transmission, T-5
30115 Friction Modifier
$23.00
$5.00
35292 Fidanza 2.1 Carbon
Kevlar Clutch Kit, 10-Spline
Disc (use with T-5 and TKO-500
transmissions)
$295.00
35293 Fidanza 2.1 Carbon
Kevlar Clutch Kit, 26-Spline
Disc (use with TKO-600
transmissions)
$320.00
Includes clutch disk, pressure
plate, release and pilot bearings,
and alignment tool.
Includes clutch disk, pressure
plate, release and pilot bearings,
and alignment tool.
7692S Seal, Transmission
Extension Housing
$8.95
5202 Seal and Bushing Kit,
Transmission Extension
Housing
$13.95
30152 Fitting, Vent, Solid Axle
5707 Bearing, Rear Axle $15.95
$11.00
Breeze Resource Guide and Price List rev. 57
printed 09/24/09, Page 7 of 10
www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Driveline: (continued)
8660S Seal, Rear Axle
$2.95
35106 Axle Set, Fox Length, 5
on 4.5” bolt circle, Center Hub
to Fit ’87-’88 Turbo-Coupe Rear
Rotors
35168 Axle Set, Fox Length, 5
on 4.5” bolt circle, Center Hub
to Fit ’94-’04 Rear Mustang
Rotors
28 spline with studs installed
28 spline with studs installed
$249.00
$249.00
RA311 Bearing Kit, 8.8” Differential
$100.00
Includes: Pinion and carrier bearings, pinion nut and seal,
crush sleeve, silicone sealer, and gear marking compound.
Note: IRS center section also requires 2 ea. FC66998 Axle
Bearings and 2 ea. 714569 seals purchased separately.
35235 M-4033-G1 Differential Girdle, Ford Racing
$189.00
Cast aluminum differential support cover with load bearing bolts
for 8.8” solid axle. The best feature is that it includes fill and
drain plugs. Made in USA.
35191 M-4006-B373 8.8" Trac
Lok Rear with 3.73:1 Gears
799.00
35152 IRS Differential Carrier
Bushing Set, Energy
Suspension, Polyurethane,
Black
$29.00
Breeze Resource Guide and Price List rev. 57
printed 09/24/09, Page 8 of 10
70517 IRS Differential Rear
Mount Fastener Kit
$11.00
Includes: Class10.9 12mm Bolts,
Washers, Self-Locking Flange
Nuts
www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Driveline: (continued)
FC66998 Bearing, Independent
Rear Axle to Differential
Housing
$8.75
30151 Fitting, Vent, IRS Center
Section
$6.00
714569 Seal, Independent Rear
Axle
$9.25
71014 EzePak IRS CV Joints and Axle Assembly™
$449.00
Skip the nasty part of an IRS build! Find a whole day of free
time! Know that you have all new CV joint assemblies. This
EzePak™ really does make your life a whole lot easier.
First, check to be sure you have the correct axles. Standard axles measure 18" while "Pin Drive" axles
are 15.5" long. Once you are sure you have the correct axles, ship the axles only (no need to send
grease or boot kits) to:
Breeze Automotive, LLC
2341 NW 71st Place
Gainesville, FL 32653
You will receive back a brand new pair of heavy duty CV Joint/Axle assemblies, made in USA.. Actual
UPS Ground return shipping will apply. This is a 45lb package. We recommend you paint the axles
between the inner boot grooves before shipping
35138 Differential Carrier Assembly, Cast Iron, with Trak-loc
Differential
$1,250.00
A remanufactured Traction-loc Center section, cast iron case,
modified with magnetic bottom drain plug, aluminum cover, all
new 3.55:1 gears, clutches, spider gear axle, bearings and
seals. 28 spline. Precision set-up. Recommended all HP
levels. Made in USA.
35206 Differential Carrier Assembly, Cast Iron, with Torsen
Differential
A remanufactured center section with Torsen differential, cast
iron case, modified with magnetic bottom drain plug, aluminum
cover, all new 3.55:1 gears, clutches, spider gear axle,
bearings and seals. 28 spline. Precision set-up.
Recommended 400 HP and below. Made in USA.
Breeze Resource Guide and Price List rev. 57
printed 09/24/09, Page 9 of 10
$1,575.00
www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Driveline: (continued)
35185 M-4204-T28 8.8" T-2 Torsen Differential, 28 Spline
$549.00
The ultimate autocross and roadrace differential. Allows
maximum corner exit speed – the secret to low lap times.
35243 8.8” IRS Differential Support Cover
This beefy cast aluminum cover is designed and made in USA by
Control Freak Suspensions. Includes differential bearing cap
supports, and fill and drain plugs. A nice way to add strength,
functionality, and style to your 8.8 IRS differential.
Breeze Resource Guide and Price List rev. 57
printed 09/24/09, Page 10 of 10
$299.99