2013 - Borla

» 2013
Throttle Body Induction Kits for Popular V8 Engines
Includes Available Options and Fuel Injection Accessories
www.BorlaInduction.com
V8 THROTTLE BODY KITS
» FORD 427 FE
Billet Machined
35mm Air Horns
with Integral
Screens
Four 58mm
Cast Aluminum
Throttle Bodies
High Volume -10
Fuel Rail Kit with AN Fittings
Adjustable
Fuel Pressure
Regulator
Cast Aluminum
Manifold with Integral
Vacuum Accumulator
Throttle Position Sensor
Billet Capstan Linkage Kit
(actual kit appearance may vary)
BORLA Induction’s Throttle Body Kit for the Ford 427 FE is fitted with -10 fuel
rails allowing for high-volume delivery. The throttles are angled inward at
10 degrees, increasing hood clearance. The standard 35mm tall, full-radius
air horns are machined from 6061-T6 billet as well as the center linkage
assembly, A -6 fitting suitable for a brake booster is also provided.
®
MODEL DESCRIPTION
PART #
V8 Kit, Ford 427 FE, 35mm Air Horn
200073
AVAILABLE OPTIONS FOR THIS KIT — SEE BACK FOR DETAILS
OPTION
PART #
OPTION
PART #
Fuel Injectors 500-670 hp
206054
High Pressure Fuel Pump
Fuel Pump Fitting Kit
206259
203057
Powder Coating of Throttle Bodies
Powder Coating of Manifold
206298
206299
ECU Kit w/sensors & wiring harness
On request
Polishing of Air Horns
Polishing of Throttle Bodies
Polishing of Manifold
206303
206300
206301
MADE IN THE USA in JOHNSON CITY, TN
1-877-GO BORLA www.borla.com
» KIT OPTIONS
for Ford 427 FE
The options shown below are available for the Throttle Body Kit featured on the front of this sheet. Call 1-877-GO BORLA for more
details, or visit www.borla.com. IMAGES SHOWN ARE REPRESENTATIVE AND MAY NOT MATCH KIT ON FRONT.
Fuel Injectors
Bosch race-proven fuel injectors give you
complete control over placement, flow rates
& much more.
Polished Finish
Enhance your engine bay even more with
mirror-polished induction jewelry. Available
for air horns, throttle bodies and the
manifold. Creates a truly custom look.
High-Pressure Fuel Pump
Powder-Coated Finish
The choice of BORLA engineers, Bosch
premium competition-grade pumps meet
the fuel delivery needs of high-performance
racing engines. Fittings Kit also available.
®
FAST ECU Kit
Featuring the latest in flash microprocessor
technology for faster processing speeds.
Engine-specific wiring harnesses simplify
installations!
Available for throttle bodies, the manifold,
or both. Provides striking contrast that
shows off the sophisticated components of
your BORLA Induction Throttle Body Kit.
®
» YOUR ONE-STOP INDUCTION SOURCE!
Throttle Body Kits for
Ford to Ferrari, Chevy to
VW, Honda to Porsche!
All featuring BORLA Induction’s
world-renowned technology, quality &
performance.
Fuel Rails
Throttle Linkage Parts
Fuel Pressure Regulators
Fittings
Precision billet construction. Several
models for a wide variety of applications.
Complete kits and parts including levers,
stops, interconnectors, cables & brackets.
®
Air Horns, Velocity Stacks
& Extensions
Huge selection for throttle bodies &
carburetors.
ECU Kits
Featuring world-renowned FAST technology.
Proven by winning racers around the world,
featuring delivery of 300-700 lbs./hr.
Bosch Competition Fuel
Injection Parts
Including fuel injectors, throttle position
sensors, high-pressure fuel pumps and fuel
pump fittings kits.
1-877-GO BORLA www.borla.com
Full selection of AN fuel system fittings.
Diagnostics
Featuring ultra-reliable single & dual
oxygen sensor air/fuel meters from FAST.
V8 THROTTLE BODY KITS
» FORD 351 Windsor
Adjustable
Fuel Pressure
Regulator
Air Horns Machined
from 6061 Billet
High Volume -10 Fuel Rail Kit
with AN Fittings
8 Individual Cast
Aluminum Runners
incorporating
50mm Throttles
Bosch Fuel
Injectors
Billet Capstan
Linkage Kit
(appearance
may vary)
MODEL DESCRIPTION
Throttle Position
Sensor
BORLA Induction presents a real cross-ram manifold for the Ford
351 Windsor small block engines fitted with 8 long runners for
stump-pulling torque. Our valley plate incorporates a vacuum
accumulator and its extended port wall construction enables
machining for several different port configurations from OEM to
225’s. Boasting looks to die for and ground-shaking power, our Ford
Cross-Ram kit was voted one of SEMA’s Best New Products for 2009.
®
PART #
V8 Kit, Ford 351W Cross Ram, 60mm Air Horn
Integral Cast Aluminum
Valley Plate with Vacuum
Accumulator
200064
AVAILABLE OPTIONS FOR THIS KIT — SEE BACK FOR DETAILS
OPTION
PART #
OPTION
PART #
High Pressure Fuel Pump
Fuel Pump Fitting Kit
206259
203057
Powder Coating of Throttle Bodies
Powder Coating of Manifold
206298
206299
ECU Kit w/sensors & wiring harness
On request
Idle Air Control
205039
Polishing of Air Horns
Polishing of Throttle Bodies
Polishing of Manifold
206303
206300
206301
MADE IN THE USA in JOHNSON CITY, TN
1-877-GO BORLA www.borla.com
» KIT OPTIONS
for 351 Windsor Cross-Ram
The options shown below are available for the Throttle Body Kit featured on the front of this sheet. Call 1-877-GO BORLA for more
details, or visit www.borla.com. IMAGES SHOWN ARE REPRESENTATIVE AND MAY NOT MATCH KIT ON FRONT.
Idle Air Control
Provides the extra air needed to meet the
demands power steering & air conditioning
put on your engine. Also increases cold
start RPM.
Polished Finish
Enhance your engine bay even more with
mirror-polished induction jewelry. Available
for air horns, throttle bodies and the
manifold. Creates a truly custom look.
High-Pressure Fuel Pump
Powder-Coated Finish
The choice of BORLA engineers, Bosch
premium competition-grade pumps meet
the fuel delivery needs of high-performance
racing engines. Fittings Kit also available.
®
FAST ECU Kit
Featuring the latest in flash microprocessor
technology for faster processing speeds.
Engine-specific wiring harnesses simplify
installations!
Available for throttle bodies, the manifold,
or both. Provides striking contrast that
shows off the sophisticated components of
your BORLA Induction Throttle Body Kit.
®
» YOUR ONE-STOP INDUCTION SOURCE!
Throttle Body Kits for
Ford to Ferrari, Chevy to
VW, Honda to Porsche!
All featuring BORLA Induction’s
world-renowned technology, quality &
performance.
Fuel Rails
Throttle Linkage Parts
Fuel Pressure Regulators
Fittings
Precision billet construction. Several
models for a wide variety of applications.
Complete kits and parts including levers,
stops, interconnectors, cables & brackets.
®
Air Horns, Velocity Stacks
& Extensions
Huge selection for throttle bodies &
carburetors.
ECU Kits
Featuring world-renowned FAST technology.
Proven by winning racers around the world,
featuring delivery of 300-700 lbs./hr.
Bosch Competition Fuel
Injection Parts
Including fuel injectors, throttle position
sensors, high-pressure fuel pumps and fuel
pump fittings kits.
1-877-GO BORLA www.borla.com
Full selection of AN fuel system fittings.
Diagnostics
Featuring ultra-reliable single & dual
oxygen sensor air/fuel meters from FAST.
V8 THROTTLE BODY KITS
» FORD 351 Windsor
Adjustable
Fuel Pressure
Regulator
Air Horns Machined
from 6061 Billet
High Volume -6 Fuel
Rail Kit with AN Fittings
Four 50mm
Cast Aluminum
Throttle Bodies
Cast
Aluminum
Manifold
with Integral
Vacuum
Accumulator
Billet Capstan Linkage Kit
(actual kit appearance may vary)
MODEL DESCRIPTION
Throttle
Position
Sensor
PART #
V8 Kit, Ford 351W, 35mm Air Horn
200102
BORLA Induction’s Ford 351 Windsor kit features fuel rails mounted in the
center for efficient fuel distribution and superior driveability. Like all BORLA
Induction V8 kits, it comes equipped with our billet center linkage assembly
and a built-in vacuum acccumulator. Big power and red-carpet looks make
this kit one of our best-sellers.
®
V8 Kit, Ford 351W, 50mm Air Horn
200074
V8 Kit, Ford 351W, 75mm Air Horn
200103
V8 Kit, Ford 351W, 100mm Air Horn
200104
®
AVAILABLE OPTIONS FOR THIS KIT — SEE BACK FOR DETAILS
OPTION
PART #
OPTION
PART #
Fuel Injectors
206343
High Pressure Fuel Pump
Fuel Pump Fitting Kit
206259
203057
Powder Coating of Throttle Bodies
Powder Coating of Manifold
206298
206299
ECU Kit w/sensors & wiring harness
On Request
Polishing of Air Horns
Polishing of Throttle Bodies
Polishing of Manifold
206303
206300
206301
Idle Air Control
205038
MADE IN THE USA in JOHNSON CITY, TN
1-877-GO BORLA www.borla.com
» KIT OPTIONS
for 351 Windsor
The options shown below are available for the Throttle Body Kit featured on the front of this sheet. Call 1-877-GO BORLA for more
details, or visit www.borla.com. IMAGES SHOWN ARE REPRESENTATIVE AND MAY NOT MATCH KIT ON FRONT.
Fuel Injectors
Bosch race-proven fuel injectors give you
complete control over placement, flow rates
& much more.
Polished Finish
Enhance your engine bay even more with
mirror-polished induction jewelry. Available
for air horns, throttle bodies and the
manifold. Creates a truly custom look.
High-Pressure Fuel Pump
The choice of BORLA engineers, Bosch
premium competition-grade pumps meet
the fuel delivery needs of high-performance
racing engines. Fittings Kit also available.
®
FAST ECU Kit
Featuring the latest in flash microprocessor
technology for faster processing speeds.
Engine-specific wiring harnesses simplify
installations!
Powder-Coated Finish
Available for throttle bodies, the manifold,
or both. Provides striking contrast that
shows off the sophisticated components of
your BORLA Induction Throttle Body Kit.
®
Idle Air Control
Provides the extra air needed to meet the
demands power steering & air conditioning
put on your engine. Also increases cold
start RPM.
» YOUR ONE-STOP INDUCTION SOURCE!
Throttle Body Kits for
Ford to Ferrari, Chevy to
VW, Honda to Porsche!
All featuring BORLA Induction’s
world-renowned technology, quality &
performance.
Fuel Rails
Throttle Linkage Parts
Fuel Pressure Regulators
Fittings
Precision billet construction. Several
models for a wide variety of applications.
Complete kits and parts including levers,
stops, interconnectors, cables & brackets.
®
Air Horns, Velocity Stacks
& Extensions
Huge selection for throttle bodies &
carburetors.
ECU Kits
Featuring world-renowned FAST technology.
Proven by winning racers around the world,
featuring delivery of 300-700 lbs./hr.
Bosch Competition Fuel
Injection Parts
Including fuel injectors, throttle position
sensors, high-pressure fuel pumps and fuel
pump fittings kits.
1-877-GO BORLA www.borla.com
Full selection of AN fuel system fittings.
Diagnostics
Featuring ultra-reliable single & dual
oxygen sensor air/fuel meters from FAST.
V8 THROTTLE BODY KITS
» FORD 302
Adjustable
Fuel Pressure
Regulator
Air Horns Machined
from 6061 Billet
High Volume Fuel Rail
Kit with AN Fittings
Four 50mm
Cast Aluminum
Throttle Bodies
Throttle
Position
Sensor
Cast
Aluminum
Manifold with
Integral Vacuum
Accumulator
Billet Capstan
Linkage Kit
MODEL DESCRIPTION
PART #
V8 Kit, Ford 302, 35mm Air Horn
200099
V8 Kit, Ford 302, 50mm Air Horn
200075
V8 Kit, Ford 302, 75mm Air Horn
200100
V8 Kit, Ford 302, 100mm Air Horn
200101
As with most BORLA Induction V8 Throttle Body Kits, the fuel rails and
injectors are positioned in the middle of the “V” in our Ford 302 Kit. We can
not stress enough how essential this is for good fuel distribution and superior
driveability. Our exclusive Fuel Rail Crossover Fittings easily transfer fuel from
one rail to the other despite the proximity of the two rails. BORLA Induction’s
billet center linkage assembly is also included, as is the vacuum accumulator
located on the base of the manifold.
®
®
AVAILABLE OPTIONS FOR THIS KIT — SEE BACK FOR DETAILS
OPTION
PART #
OPTION
PART #
Fuel Injectors 400-500 hp
206343
High Pressure Fuel Pump
Fuel Pump Fitting Kit
206259
203057
Powder Coating of Throttle Bodies
Powder Coating of Manifold
206298
206299
ECU Kit w/sensors & wiring harness
On request
Polishing of Air Horns
Polishing of Throttle Bodies
Polishing of Manifold
206303
206300
206301
Idle Air Control
205023
MADE IN THE USA in JOHNSON CITY, TN
1-877-GO BORLA www.borla.com
» KIT OPTIONS
for Ford 302
The options shown below are available for the Throttle Body Kit featured on the front of this sheet. Call 1-877-GO BORLA for more
details, or visit www.borla.com. IMAGES SHOWN ARE REPRESENTATIVE AND MAY NOT MATCH KIT ON FRONT.
Fuel Injectors
Bosch race-proven fuel injectors give you
complete control over placement, flow rates
& much more.
Polished Finish
Enhance your engine bay even more with
mirror-polished induction jewelry. Available
for air horns, throttle bodies and the
manifold. Creates a truly custom look.
High-Pressure Fuel Pump
The choice of BORLA engineers, Bosch
premium competition-grade pumps meet
the fuel delivery needs of high-performance
racing engines. Fittings Kit also available.
®
FAST ECU Kit
Featuring the latest in flash microprocessor
technology for faster processing speeds.
Engine-specific wiring harnesses simplify
installations!
Powder-Coated Finish
Available for throttle bodies, the manifold,
or both. Provides striking contrast that
shows off the sophisticated components of
your BORLA Induction Throttle Body Kit.
®
Idle Air Control
Provides the extra air needed to meet the
demands power steering & air conditioning
put on your engine. Also increases cold
start RPM.
» YOUR ONE-STOP INDUCTION SOURCE!
Throttle Body Kits for
Ford to Ferrari, Chevy to
VW, Honda to Porsche!
All featuring BORLA Induction’s
world-renowned technology, quality &
performance.
Fuel Rails
Throttle Linkage Parts
Fuel Pressure Regulators
Fittings
Precision billet construction. Several
models for a wide variety of applications.
Complete kits and parts including levers,
stops, interconnectors, cables & brackets.
®
Air Horns, Velocity Stacks
& Extensions
Huge selection for throttle bodies &
carburetors.
ECU Kits
Featuring world-renowned FAST technology.
Proven by winning racers around the world,
featuring delivery of 300-700 lbs./hr.
Bosch Competition Fuel
Injection Parts
Including fuel injectors, throttle position
sensors, high-pressure fuel pumps and fuel
pump fittings kits.
1-877-GO BORLA www.borla.com
Full selection of AN fuel system fittings.
Diagnostics
Featuring ultra-reliable single & dual
oxygen sensor air/fuel meters from FAST.
V8 THROTTLE BODY KITS
» CHEVY 350
Adjustable
Fuel Pressure
Regulator
Air Horns Machined
from 6061 Billet
High Volume -6 Fuel
Rail Kit with AN Fittings
Four 50mm
Cast Aluminum
Throttle Bodies
Cast
Aluminum
Manifold
with Integral
Vacuum
Accumulator
Throttle
Position
Sensor
Billet Capstan
Linkage Kit
(appearance
may vary)
MODEL DESCRIPTION
PART #
V8 Kit, Chevy 350, 35mm Air Horn
200095
V8 Kit, Chevy 350, 50mm Air Horn
200081
V8 Kit, Chevy 350, 75mm Air Horn
200096
V8 Kit, Chevy 350, 100mm Air Horn
200097
As with most BORLA Induction V8 Throttle Body Kits, the fuel rails and injectors
are positioned in the middle of the “V” in our Chevy 350 Kit, an essential
design for superior fuel management and driveability. The kit includes our
exclusive Fuel Rail Crossover Fittings to ensure fuel is efficiently distributed,
and our billet center linkage assembly with vacuum acccumulator built into
the base of the manifold.
®
AVAILABLE OPTIONS FOR THIS KIT — SEE BACK FOR DETAILS
OPTION
PART #
OPTION
PART #
Fuel Injectors 400-500 hp
Fuel Injectors 500-600 hp
206343
206054
Idle Air Control
205040
High Pressure Fuel Pump
Fuel Pump Fitting Kit
206259
203057
Powder Coating of Throttle Bodies
Powder Coating of Manifold
206298
206299
ECU Kit w/sensors & wiring harness
On request
Polishing of Air Horns
Polishing of Throttle Bodies
Polishing of Manifold
206303
206300
206301
MADE IN THE USA in JOHNSON CITY, TN
1-877-GO BORLA www.borla.com
» KIT OPTIONS
for Chevy 350
The options shown below are available for the Throttle Body Kit featured on the front of this sheet. Call 1-877-GO BORLA for more
details, or visit www.borla.com. IMAGES SHOWN ARE REPRESENTATIVE AND MAY NOT MATCH KIT ON FRONT.
Fuel Injectors
Bosch race-proven fuel injectors give you
complete control over placement, flow rates
& much more.
Polished Finish
Enhance your engine bay even more with
mirror-polished induction jewelry. Available
for air horns, throttle bodies and the
manifold. Creates a truly custom look.
High-Pressure Fuel Pump
The choice of BORLA engineers, Bosch
premium competition-grade pumps meet
the fuel delivery needs of high-performance
racing engines. Fittings Kit also available.
®
FAST ECU Kit
Featuring the latest in flash microprocessor
technology for faster processing speeds.
Engine-specific wiring harnesses simplify
installations!
Powder-Coated Finish
Available for throttle bodies, the manifold,
or both. Provides striking contrast that
shows off the sophisticated components of
your BORLA Induction Throttle Body Kit.
®
Idle Air Control
Provides the extra air needed to meet the
demands power steering & air conditioning
put on your engine. Also increases cold
start RPM.
» YOUR ONE-STOP INDUCTION SOURCE!
Throttle Body Kits for
Ford to Ferrari, Chevy to
VW, Honda to Porsche!
All featuring BORLA Induction’s
world-renowned technology, quality &
performance.
Fuel Rails
Throttle Linkage Parts
Fuel Pressure Regulators
Fittings
Precision billet construction. Several
models for a wide variety of applications.
Complete kits and parts including levers,
stops, interconnectors, cables & brackets.
®
Air Horns, Velocity Stacks
& Extensions
Huge selection for throttle bodies &
carburetors.
ECU Kits
Featuring world-renowned FAST technology.
Proven by winning racers around the world,
featuring delivery of 300-700 lbs./hr.
Bosch Competition Fuel
Injection Parts
Including fuel injectors, throttle position
sensors, high-pressure fuel pumps and fuel
pump fittings kits.
1-877-GO BORLA www.borla.com
Full selection of AN fuel system fittings.
Diagnostics
Featuring ultra-reliable single & dual
oxygen sensor air/fuel meters from FAST.
V8 THROTTLE BODY KITS
» 6.1L HEMI
Adjustable
Fuel Pressure
Regulator
Throttle
Position
Sensor
Air Horns with Integral
Screens Machined
from 6061 Billet
High Volume -10
Fuel Rail Kit with
AN Fittings
Four 58mm
Cast Aluminum
Throttle Bodies
Billet Capstan
Linkage Kit
(appearance
may vary)
Cast
Aluminum
Manifold
MODEL DESCRIPTION
Are you building a street rod with a 6.1 liter Hemi? Give it an extra 50
horsepower and all the glamour of BORLA Induction’s 58mm 8-stack throttles
kit. From its billet valley cover and vacuum accumulator to the tip of its billet
air horns, our 6.1 Hemi kit is built from the inside out for show n’ go.
®
PART #
V8 Kit, Hemi 6.1L, 35mm Air Horn
200071
AVAILABLE OPTIONS FOR THIS KIT — SEE BACK FOR DETAILS
OPTION
PART #
OPTION
PART #
Fuel Injectors 500-670 hp
206054
High Pressure Fuel Pump
Fuel Pump Fitting Kit
206259
203057
Powder Coating of Throttle Bodies
Powder Coating of Manifold
206298
206299
ECU Kit w/sensors & wiring harness
On request
Polishing of Air Horns
Polishing of Throttle Bodies
Polishing of Manifold
206303
206300
206301
MADE IN THE USA in JOHNSON CITY, TN
1-877-GO BORLA www.borla.com
» KIT OPTIONS
for 6.1L Hemi
The options shown below are available for the Throttle Body Kit featured on the front of this sheet. Call 1-877-GO BORLA for more
details, or visit www.borla.com. IMAGES SHOWN ARE REPRESENTATIVE AND MAY NOT MATCH KIT ON FRONT.
Fuel Injectors
Bosch race-proven fuel injectors give you
complete control over placement, flow rates
& much more.
Polished Finish
Enhance your engine bay even more with
mirror-polished induction jewelry. Available
for air horns, throttle bodies and the
manifold. Creates a truly custom look.
High-Pressure Fuel Pump
Powder-Coated Finish
The choice of BORLA engineers, Bosch
premium competition-grade pumps meet
the fuel delivery needs of high-performance
racing engines. Fittings Kit also available.
®
FAST ECU Kit
Featuring the latest in flash microprocessor
technology for faster processing speeds.
Engine-specific wiring harnesses simplify
installations!
Available for throttle bodies, the manifold,
or both. Provides striking contrast that
shows off the sophisticated components of
your BORLA Induction Throttle Body Kit.
®
» YOUR ONE-STOP INDUCTION SOURCE!
Throttle Body Kits for
Ford to Ferrari, Chevy to
VW, Honda to Porsche!
All featuring BORLA Induction’s
world-renowned technology, quality &
performance.
Fuel Rails
Throttle Linkage Parts
Fuel Pressure Regulators
Fittings
Precision billet construction. Several
models for a wide variety of applications.
Complete kits and parts including levers,
stops, interconnectors, cables & brackets.
®
Air Horns, Velocity Stacks
& Extensions
Huge selection for throttle bodies &
carburetors.
ECU Kits
Featuring world-renowned FAST technology.
Proven by winning racers around the world,
featuring delivery of 300-700 lbs./hr.
Bosch Competition Fuel
Injection Parts
Including fuel injectors, throttle position
sensors, high-pressure fuel pumps and fuel
pump fittings kits.
1-877-GO BORLA www.borla.com
Full selection of AN fuel system fittings.
Diagnostics
Featuring ultra-reliable single & dual
oxygen sensor air/fuel meters from FAST.
V8 THROTTLE BODY KITS
» GM LS3
Air Horns Machined
from 6061 Billet
Throttle Position
Sensor
High Volume -10 Fuel Rail
Kit with AN Fittings
Cast
Aluminum
Manifold
Bosch Fuel
Injectors
Adjustable
Fuel Pressure
Regulator
Eight 55mm
Billet Machined
Throttle Bodies
Billet Capstan Linkage Kit
(appearance may vary)
This creation from BORLA Induction draws on the experience of providing fuel
systems for many Le Mans winners. Illustrated above is our billet manifold
version for those who want the ultimate piece of induction jewelry. 55mm
throttles provide ample air flow for the most ambitious engine specification.
BORLA Induction’s attention to detail shows through. This kit will also work for
LS1 and LS2 motors, if the cylinder heads are changed to LS3 specification.
®
MODEL DESCRIPTION
PART #
V8 Kit, GM LS3, 85mm Air Horn
®
200067
AVAILABLE OPTIONS FOR THIS KIT — SEE BACK FOR DETAILS
OPTION
PART #
OPTION
PART #
High Pressure Fuel Pump
Fuel Pump Fitting Kit
206259
203057
Powder Coating of Throttle Bodies
Powder Coating of Manifold
206298
206299
ECU Kit w/sensors & wiring harness
On request
Polishing of Air Horns
Polishing of Throttle Bodies
Polishing of Manifold
206303
206300
206301
MADE IN THE USA in JOHNSON CITY, TN
1-877-GO BORLA www.borla.com
» KIT OPTIONS
for GM LS3
The options shown below are available for the Throttle Body Kit featured on the front of this sheet. Call 1-877-GO BORLA for more
details, or visit www.borla.com. IMAGES SHOWN ARE REPRESENTATIVE AND MAY NOT MATCH KIT ON FRONT.
High-Pressure Fuel Pump
Powder-Coated Finish
FAST ECU Kit
The choice of BORLA engineers, Bosch
premium competition-grade pumps meet
the fuel delivery needs of high-performance
racing engines. Fittings Kit also available.
®
Polished Finish
Featuring the latest in flash microprocessor
technology for faster processing speeds.
Engine-specific wiring harnesses simplify
installations!
Enhance your engine bay even more with
mirror-polished induction jewelry. Available
for air horns, throttle bodies and the
manifold. Creates a truly custom look.
Available for throttle bodies, the manifold,
or both. Provides striking contrast that
shows off the sophisticated components of
your BORLA Induction Throttle Body Kit.
®
» YOUR ONE-STOP INDUCTION SOURCE!
Throttle Body Kits for
Ford to Ferrari, Chevy to
VW, Honda to Porsche!
All featuring BORLA Induction’s
world-renowned technology, quality &
performance.
Fuel Rails
Throttle Linkage Parts
Fuel Pressure Regulators
Fittings
Precision billet construction. Several
models for a wide variety of applications.
Complete kits and parts including levers,
stops, interconnectors, cables & brackets.
®
Air Horns, Velocity Stacks
& Extensions
Huge selection for throttle bodies &
carburetors.
ECU Kits
Featuring world-renowned FAST technology.
Proven by winning racers around the world,
featuring delivery of 300-700 lbs./hr.
Bosch Competition Fuel
Injection Parts
Including fuel injectors, throttle position
sensors, high-pressure fuel pumps and fuel
pump fittings kits.
1-877-GO BORLA www.borla.com
Full selection of AN fuel system fittings.
Diagnostics
Featuring ultra-reliable single & dual
oxygen sensor air/fuel meters from FAST.
V8 THROTTLE BODY KITS
» FORD 460
Billet
Air Horns
with Integral
Screens
Billet Machined One-Piece
Fuel Rail with AN Fittings
Throttle
Position Sensor
Adjustable
Fuel Pressure
Regulator
Cast
Aluminum
Manifold
Four 58mm
Cast Aluminum
Throttle Bodies
Billet Capstan Linkage Kit
(actual kit appearance may vary)
Available with 58mm throttles, angled toward the center line at 8 degrees
to improve hood clearance. Because of the limited space available this unit
incorporates a stunning one-piece billet fuel rail which feeds both banks.
Hidden under the rail is a BORLA billet linkage assembly and an adjustable
fuel pressure regulator. The linkage incorporates a vacuum accumulator that
accepts signals from each throttle bore and provides a connection for the MAP
sensor. A dash -6 fitting suitable for a brake booster is also provided.
®
MODEL DESCRIPTION
PART #
V8 Kit, Ford 460, 35mm Air Horn
200079
AVAILABLE OPTIONS FOR THIS KIT — SEE BACK FOR DETAILS
OPTION
PART #
OPTION
PART #
Fuel Injectors 500-670 hp
206054
High Pressure Fuel Pump
Fuel Pump Fitting Kit
206259
203057
Powder Coating of Throttle Bodies
Powder Coating of Manifold
206298
206299
ECU Kit w/sensors & wiring harness
On request
Polishing of Air Horns
Polishing of Throttle Bodies
Polishing of Manifold
206303
206300
206301
MADE IN THE USA in JOHNSON CITY, TN
1-877-GO BORLA www.borla.com
» KIT OPTIONS
for Ford 460
The options shown below are available for the Throttle Body Kit featured on the front of this sheet. Call 1-877-GO BORLA for more
details, or visit www.borla.com. IMAGES SHOWN ARE REPRESENTATIVE AND MAY NOT MATCH KIT ON FRONT.
Fuel Injectors
Bosch race-proven fuel injectors give you
complete control over placement, flow rates
& much more.
Polished Finish
Enhance your engine bay even more with
mirror-polished induction jewelry. Available
for air horns, throttle bodies and the
manifold. Creates a truly custom look.
High-Pressure Fuel Pump
Powder-Coated Finish
The choice of BORLA engineers, Bosch
premium competition-grade pumps meet
the fuel delivery needs of high-performance
racing engines. Fittings Kit also available.
®
FAST ECU Kit
Featuring the latest in flash microprocessor
technology for faster processing speeds.
Engine-specific wiring harnesses simplify
installations!
Available for throttle bodies, the manifold,
or both. Provides striking contrast that
shows off the sophisticated components of
your BORLA Induction Throttle Body Kit.
®
» YOUR ONE-STOP INDUCTION SOURCE!
Throttle Body Kits for
Ford to Ferrari, Chevy to
VW, Honda to Porsche!
All featuring BORLA Induction’s
world-renowned technology, quality &
performance.
Fuel Rails
Throttle Linkage Parts
Fuel Pressure Regulators
Fittings
Precision billet construction. Several
models for a wide variety of applications.
Complete kits and parts including levers,
stops, interconnectors, cables & brackets.
®
Air Horns, Velocity Stacks
& Extensions
Huge selection for throttle bodies &
carburetors.
ECU Kits
Featuring world-renowned FAST technology.
Proven by winning racers around the world,
featuring delivery of 300-700 lbs./hr.
Bosch Competition Fuel
Injection Parts
Including fuel injectors, throttle position
sensors, high-pressure fuel pumps and fuel
pump fittings kits.
1-877-GO BORLA www.borla.com
Full selection of AN fuel system fittings.
Diagnostics
Featuring ultra-reliable single & dual
oxygen sensor air/fuel meters from FAST.
V8 THROTTLE BODY KITS
» BIG BLOCK CHEVY
Adjustable
Fuel Pressure
Regulator
Throttle Position
Sensor
Billet Air Horns
with Integral Screens
Bosch Injectors
Four 58mm Cast Aluminum
Throttle Bodies
Billet Machined One Piece Fuel
Rail with AN Fittings
Cast
Aluminum
Manifold
There has been no eight stack
manifold available for the Big
Block Chevrolet for many years.
A few old units have surfaced but
they require extensive re-work
to accommodate fuel injection.
BORLA brings you a brand new
BBC design specifically for our 58mm
throttles. Tucked underneath our stunning
one-piece billet fuel rail, which feeds both banks, is
an adjustable fuel pressure regulator and a BORLA billet
linkage assembly. The linkage assembly incorporates a vacuum
accumulator that accepts signals from each throttle bore and
provides a connection for the MAP sensor. A dash -6 fitting suitable
for a brake booster is also provided.
®
Billet Capstan Linkage Kit
(actual kit appearance may vary)
®
MODEL DESCRIPTION
PART #
V8 Kit, Chevy Big Block, 35mm Air Horn
200094
AVAILABLE OPTIONS FOR THIS KIT — SEE BACK FOR DETAILS
OPTION
PART #
OPTION
PART #
High Pressure Fuel Pump
Fuel Pump Fitting Kit
206259
203057
Powder Coating of Throttle Bodies
Powder Coating of Manifold
206298
206299
ECU Kit w/sensors & wiring harness
On request
Polishing of Air Horns
Polishing of Throttle Bodies
Polishing of Manifold
206303
206300
206301
MADE IN THE USA in JOHNSON CITY, TN
1-877-GO BORLA www.borla.com
» KIT OPTIONS
for Big Block Chevy
The options shown below are available for the Throttle Body Kit featured on the front of this sheet. Call 1-877-GO BORLA for more
details, or visit www.borla.com. IMAGES SHOWN ARE REPRESENTATIVE AND MAY NOT MATCH KIT ON FRONT.
FAST ECU Kit
Powder-Coated Finish
Featuring the latest in flash microprocessor technology for faster
processing speeds. Engine-specific wiring harnesses simplify
installations!
Polished Finish
Available for throttle bodies, the manifold, or both. Provides striking
contrast that shows off the sophisticated components of your
BORLA Induction Throttle Body Kit.
®
High-Pressure Fuel Pump
Enhance your engine bay even more with mirror-polished induction
jewelry. Available for air horns, throttle bodies and the manifold.
Creates a truly custom look.
The choice of BORLA engineers, Bosch premium competition-grade
pumps meet the fuel delivery needs of high-performance racing
engines. Fittings Kit also available.
®
» YOUR ONE-STOP INDUCTION SOURCE!
Throttle Body Kits for
Ford to Ferrari, Chevy to
VW, Honda to Porsche!
All featuring BORLA Induction’s
world-renowned technology, quality &
performance.
Fuel Rails
Throttle Linkage Parts
Fuel Pressure Regulators
Fittings
Precision billet construction. Several
models for a wide variety of applications.
Complete kits and parts including levers,
stops, interconnectors, cables & brackets.
®
Huge selection for throttle bodies &
carburetors.
ECU Kits
Featuring world-renowned FAST technology.
Proven by winning racers around the world,
featuring delivery of 300-700 lbs./hr.
Bosch Competition Fuel
Injection Parts
Including fuel injectors, throttle position
sensors, high-pressure fuel pumps and fuel
pump fittings kits.
1-877-GO BORLA www.borla.com
Full selection of AN fuel system fittings.
Featuring ultra-reliable single & dual
oxygen sensor air/fuel meters from FAST.
BORLA Tennessee
®
Corporate / Manufacturing
500 Borla Drive, Johnson City, TN 37604
Ph: 423.979.4000 Fax: 423.979.4099
BORLA California
®
Sales / Marketing / R&D / Engineering
701 Arcturus Avenue, Oxnard, CA 93033
Ph: 805.986.8600 Fax: 805.986.8940
TOLL FREE USA
877.462.6752
www.BorlaInduction.com
All contents © BORLA® Performance Industries Inc. All rights reserved. Printed in the U.S.A.