timberjackha rv ester

T I M B E R J A C K H A RV E S T E R
1470D
T I M B E R J A C K H A RV E S T E R
1470D
“The tough guy
for rough terrain”
To provide maximum stability in really tough conditions,
the 1470D is longer, wider and has more weight for stability
than other Timberjack harvesters. It is the biggest member of
our harvester family and has been redesigned to provide the
same technological advances as its little brother, the 1270D.
New size for
productivity
Upgraded for serviceability
The 1470D is designed for demanding regeneration harvesting applications in tough conditions like deep snow, marshland, rough terrain and steep slopes. Using the same axles
as the Timberjack 1710D forwarder, the 1470D features larger wheels and more ground clearance than earlier models
- ensuring optimum performance even in the most difficult
conditions.
The engine hood is divided into two sections to facilitate maintenance work. The larger front engine hood can be
raised with an electrical spindle motor. The new component
layout on both the front and rear frames ensures convenient
access to all routine service points around the engine and
pumps. Fewer service points, e.g. for the bogie oscillation
bearing, and extended change intervals for engine oil and filter radically reduce the time needed for maintenance work,
thus enhancing overall profitability.
Fitted with a John Deere engine, and offering a choice of
4 robust harvester heads, the 1470D is poised to boost efficiency and meet today’s logging challenges better than ever
before.
The big friendly giant
The unique balanced bogie, only available on Timberjack
machines, combined with a low center of gravity, advanced
transmission control system and wide tires, provides excellent
levels of tractive force and reduces ground impact. This ensures effortless movement in all conditions. Superior stability
allows the use of a longer boom reach thus minimizing the
area touched by wheels. The low-emission Deere engine conforms with the latest emission regulations in both Europe and
North America. What’s more, each machine can be supplied
with a comprehensive environmental kit and vacuum pump
for its hydraulic system, if required.
2/3
TIMBERJACK
H A RV E S T E R
1470D
The new standard
for visibility!
As cozy as home
Not only big in size, the
Timberjack 1470D is also big
in visibility and operator comfort. With these vital features
in mind, we aim to see to it
that you reap the maximum
benefits from the 1470D’s
superior power.
The Timberjack 1470D furnishes an
operator environment which is both
functional and comfortable.
The 1470D ensures enhanced visibility
in all directions - including backwards.
The narrower rear end of the new model
improves both working and driving visibility, creating a new standard for harvester visibility.
The spacious cab has all the ergonomic innovations you have come to expect from Timberjack harvesters: an
ergonomic seat, plus easy-to-use joysticks and fingertip controls with the
Timbermatic™ 300 system. Additional
luxuries like a CD player and a removable lunch box integrated into the cabin
door bring the comforts of home to your
workplace in the forest.
Turning night into day
The 3 degrees of
freedom
Timberjack also sharpens your view
with enhanced on-site illumination.
The new optional Xenon lights produce
the same amount of light as conventional light bulbs, but last five times longer and consume only one-third of the
energy. Due to their daylight-like quality, the lights are also particularly gentle
on the human eye.
The leveling and turning mechanism
provides you with three new degrees of
operating freedom: leveling/tilting sideways, leveling/tilting lengthways, and
turning around the vertical axis. These
functions are entirely independent and
adjustable. As a result, the operator can
enjoy all the advantages of a turning
cabin without visibility disturbances or
knocks caused by boom movements.
The leveling and turning cabin enables
flexibility and ease of movement on difficult terrain, reduces contact damage
and improves operator ergonomy.
4/5
T I M B E R J A C K H A RV E S T E R
1470D
Your office in the
forest
Accuracy, speed and productivity are
essential competitive factors in today’s
logging business. The Timbermatic™
300 control and measuring system gives
you the tools to achieve your productivity goals, and much more. It also
provides you with all the facilities of a
modern office - right in the middle of
the forest.
Order-based harvesting requi-
Your decision-making tool
res a control system with accurate measurement, computer
connections and wireless data
transfer. Timbermatic™ 300
is a measuring and control
system which is standard for
the 1470D harvester. This
PC/Windows® based system
neatly integrates the harvesterhead measuring system with
the TMC™ (Total Machine
Control) functions.
The automatic measuring system
expertly selects the optimum sawing
point. This means operators don’t
have to waste valuable time deciding
where to cut the trunk, and can concentrate on monitoring the timber
quality instead. A new feed control also
optimizes the feeding power without
slipping and ensures precise cutting,
improving both length and diameter
accuracy. As a new Timberjack option,
the patented saw control system,
FlashCut™, automatically ensures that
the sawbar feeding keeps pace with the
rotation speed of the saw motor. It keeps
the chain speed at an optimal level
regardless of the tree species, whether
the timber is frozen or not, or sharpness/
bluntness of the saw chain. This results
in more efficient sawing, crack-free
crosscutting and a longer lifetime of the
sawbar and chain. FlashCut™ is the
trademark for the smartest saw control
on the market.
A friendly PC world
An information
solution for the future
Timbermatic™ 300 presents the entire
measuring system on one user-friendly
color screen. The graphical interface
with a two-level menu system is both
logical and quick and easy to use. As a
PC-based system, the Timbermatic™
300 allows users to work in a Windows®
environment with familiar software
tools, e-mail, maps and GPS programs.
The display is user configurable: you
select only those parameters and programs you need.
With wireless data transfer via the
Internet or other modern modes of
communication, your Timbermatic™
300 forms a ready-made platform on
which to develop an extensive information system for your machinery. In addition, it converts your forest environment into a fully equipped office, complete with CD-ROM drive, printer etc.
Timbermatic™ 300 is available in 12
language versions. A TimberOffice software package maximizes the utilization
of the Timbermatic™ 300 information
and enables you to manage business at
home.
6/7
T I M B E R J A C K H A RV E S T E R
1470D
The 1470D can also afford to
be big-headed when it comes
to innovation power. Together
with its proven technology and
the world’s most competitive
harvester heads, this machine is geared up to make your
production figures bigger than
ever.
Enlarging your
production figures
1250 Nm for
superior power
A new electrically-controlled, common-rail fuel-injected John Deere diesel engine supplies the 1470D with the
same superior power output, but with
a torque increase of 25% compared to
previous models. The high torque output enables simultaneous use of the feed
motors and the boom, maximizing your
harvesting efficiency. The 1250 Nm tor-
que also allows the harvester to operate
at lower rpm, which results in improved
fuel economy, increased component life
and reduced noise levels. Just as importantly, service intervals for essentials
like engine oil and filter change have
been extended from 250 hours to 500
hours.
24/28 MPa for peak
performance at brief
intervals
The 1470D’s hydraulic system with a
unique 24/28 MPa dual working pressure system generates higher hydraulic
oil pressure for brief intervals in situations where greater power is needed,
for instance at the start of feeding and
in sawing. The higher pressure delivers
more power to sawing thus eliminating
cutting cracks and to the start of feeding
ensuring efficient operation.
3.0 m of stability
The 1470D has a 50 cm longer wheelbase than the 1270D series machines and a broader width of 3.0 m.
Furthermore, the 1470D features a larger balanced bogie unit and a strong
boom achieving a full 10 m reach even
when felling heavier timber. These features, combined with the machine’s low
center of gravity, provide a highly stable
platform during both harvesting work
and locomotion - particularly on steep
slopes. The stability is exceptionally
high even when the boom is fully extended. To further improve its performance
on steep slopes, the 1470D exerts a tractive force of 190 kN, the highest on the
market.
8/9
T I M B E R J A C K
1470D
Technical
Data
H A R V E S T E R
Technology
that beats
the rest
Dimensions
Brakes
Length ............................ 7700 mm
Nominal Width ................ 3000 mm (650 tires)
3040 mm (750 tires)
Height............................. 3830 mm (3980 mm with leveling cabin)
Transportation height ...... 3830 mm (3850 with leveling cabin, tilted)
Ground clearance............ 710 mm
Note! Measurements are nominal and may vary due to tire
manufacturing tolerances.
Service and working brakes are hydraulically actuated, oilimmersed, multiple-disc brakes. Spring-actuated parking
and emergency brakes
Weight
Depending on
equipment, min............... 18800 kg
Engine
John Deere JD6081 HTJ 04 diesel engine
Cylinder volume .............. 8.1 liters
Power output .................. 180 kW / 1200-2000 rpm
Torque ...............................1250 Nm / 1400 rpm
Fuel tank ........................ 480 l
Viscous fan drive
Transmission
Hydrostatic-mechanical
Two-speed gearbox
Speed ............................. 0-24 km/h
Tractive force.................. 190 kN
Axles
Front: Bogie axle with electro-hydraulic differential lock
Rear: Single rigid axle with electro-hydraulic differential lock
Hydraulic system
Load-sensing system
Pump displacement .....................190 cm3/r
Flow ............................................304 l / 1600 rpm
Working pressure.........................24 / 28 MPa
Control system.................................Timbermatic™ 300
Hydraulic oil system capacity.......~ 300 l
Electrical system
Voltage ........................................24 V
Batteries ......................................2 x 140 Ah
Alternator.....................................140 A
Working lights: 14 twin power and 4 single lamps on the
boom, 30 lux in the working area of the boom
Tires
Front:...........................................650x26,5 or 750x26,5
Rear:............................................700x34
Steering
Boom
Articulated frame steering
Steering angle ................ ±42°
Electrical proportional off-road steering
Parallel motion knuckle boom TJ 210 H 90, 97 or 115
Reach with head..........................9.3, 10 or 11.8 m
Gross lifting torque ......................178 kNm
Gross slewing torque ...................43.6 kNm
Tilt angle......................................-13°– +25°
Slewing angle ..............................220°
MAKE
DECISIONS
BOOST
PROFITS
THINK
GREEN
3980 leveling cab
TAKE
CONTROL
Cab
Spacious, well-lit and comfortable cab with an
ergonomic seat and low-effort mini-grip controls.
Efficient heating and air conditioning. Excellent
visibility on all sides and up to the tree tops. Noise
level meets ISO standards.
Radio/cassette/CD-player. Light green polycarbonate windows. Safety tested according to ISO
standards.
Timberjack cab-leveling option
The tilting cab is mounted on a leveling platform
on the front frame that provides for three degrees
of freedom. Tilting sideways 15°, forward and
backward 11°. Turning +/- 50°. Tilting functions
are independent, and can be controlled individually
or in combination. The leveling and turning can be
actuated automatically or manually.
Measuring system
• Timbermatic™ 300, PC/Windows®-based
measuring and control system integrates the
harvester head measuring and control system
with the TMC base machine control system
• Modular based CAN-bus reduces the amount of
cabling needed, ensuring accuracy and reliability
• Easy to use, information is displayed on large
color display with clear and userfriendly icons
and two-level menus, keyboard with integrated
mouse
• Highly automated harvester head control
software, including e.g. automatic controls for
sawing, harvester head tilt-up, pressure adjustments of the delimbing knives and feed rollers,
stem feed, color marking and stump treatment
• Compact and efficient design of the push
buttons, joysticks and keyboard for excellent
ergonomics
• Easy calibration of length and diameter measuring system
• Full tree prediction, price and/or distribution
and/or limitations –based optimization, unlimited number of sites
• A4 color printer for printing maps, production
reports, work and repair statistics, production
instructions, calibration history, stem data, log
table, machine parameters
• User friendly interface, help and troubleshooting
• CD-ROM, floppy disc and USB port for data
transfer
• E-mail software installed
• SilviA program
• Software for optional electronic caliper
• Easy to install and update software
Head descriptions
Model
Max opening upper knives, mm
Max opening feed rollers, mm
Delimbing diameter, tip to tip, mm
Max cutting diameter, mm
Weight, incl. rotator and link, kg
Feed force at 24 MPa gross, kN*)
Feed rollers, pcs
Feed speed, m/s
Chain speed, m/s
Operating pressure max, MPa
Saw bar, cm
Max reach with the TJ 210 H
boom, m
762C
550
606
430
650
1270-1350
23.4-28.0
2
0-4.5
40
24 / 28
75 / 80
9.3
H762
770
620
480
650
1215-1275
25.1-33.8
2
0-5.0
40
24 / 28
82.5
10
H754
560
560
400
550 / 620
880-930
16.0-25.2
4
0-5.0
40
24 / 28
64 / 75
11.8
*) Depends on feed motor size
The information in this brochure was correct at the time of publication and is provided as a guide only. Not all
options may be available worldwide.
Please contact your Timberjack dealer to determine the options available in your country.
758
680
700
480
650
1080-1150
22.0-27.0
4
0-4.7
40
24 / 28
75
10
Optional equipment
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Leveling and turning cabin
CD-changer
Xenon working lights
Thinning lights
Sun blinds
Preheater for cabin, engine and hydraulic oil tank
Refill pump for fuel
Refill pump for hydraulic oil
Vacuum pump for hydraulics
Hydraulic oil off-line filter
Chains, tracks
Spare wheel
Electronic calipers
Colour marking system
Stump treatment device
Automatic boom leveling
Flashcut saw control
Boom damping
Environmental kit
Note! Standard and optional equipment may vary. For
details contact your local dealer.
A head for work
Timberjack is also the world-class name
for high-quality and heavy-duty harvester heads. Their superb performance and durability has been demonstrated in all kinds of work applications
all over the world for years. The new
1470D comes equipped with 4 alternatives according to your specific requirements.
The new 1470D can be equipped with
the extremely robust H762 or 758 harvester heads designed for regeneration harvesting. Thanks to the 4-wheel
drive and short frame construction,
the 758 is well suited for bent timber
and strong branches. The H762 has
the Supercut™ saw unit with integrated chain lubrication and tensioning as
standard. On the 4-wheel drive heads
the Supercut is an optional feature.
10/11
TAKE CONTROL
Timberjack is no ordinary forest machine. It is the right and
“bright” partner that makes you - the operator - a better professional in forest operations. When you invest in Timberjack, you
are not only getting a robust high-production machine but also
a complete package of forest management capabilities.
MAKE DECISIONS
The state-of-the-art control system automatically performs all
instructed travel and work functions with incredible speed and
precision.
BOOST PROFITS
Ensuring high output in various harvesting applications,
Timberjack delivers optimum results whatever the task. It gives
you the freedom to move from one job to the next without missing a beat. Geared up for outstanding performance, Timberjack
is your razor-sharp business partner.
THINK GREEN
You can always depend on Timberjack for an environmentally
sound solution. It’s your strongest ally when it comes to
sustaining both a healthy residual forest and a reputation for
responsible forest stewardship.
This brochure may include features or options not available in all markets.
® Timberjack, Timbermatic, TMC, TimberOffice, FlashCut and the donkey symbol are
registered trademarks of Timberjack Inc. Supercut™ is a trademark of Hultdins System Ab.
Imageneering/Printed in Finland by Offset Ulonen. EN/05/03
www.timberjack.com