Driven Tools (Mazak Series)

Driven Tools (Mazak Series)
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06
Driven Tools (Mazak Series)
TABLE OF CONTENTS
PA GE( S)
D ESIG N A N D B EN EF IT S
M AZAK
M A C HI N E
3
M O D E L( S )
T O O L A X IS
SQT10 0 M SY ,10 0 M S,10 0 M Y ,10 0 M ,10 M S,10
SQT2 50 M SY (16 ),2 50 M S(16 ),2 50 M Y (16),2 50 M (16),2 0 0 M SY (16 ),2 0 0 M S(16 ),2 0 0 M Y (16 ),2 0 0 M (16 )
STRA IGHT OFFSET
6 - 9
STRA IGHT
32 - 35
RIGHT A NGLE
QUICK TURN
NEX US
&
SUPER
QUICK TURN
SERIES
M ULTIPLEX
SERIES
QTN2 0 0 M S,2 0 0 M ,2 50 M S,2 50 M
SQT2 50 M SY ,2 50 M S,2 50 M Y ,2 50 M ,2 0 0 M SY ,2 0 0 M S,2 00 M Y ,2 0 0 M
SQT18 M SY ,18 M S,18 M Y ,15M SY ,15M S,15M Y ,15
RIGHT A NGLE
10 - 11
STRA IGHT OFFSET
12 - 15
STRA IGHT
36 - 39
RIGHT A NGLE
16 - 17
QTN4 0 0 M ,4 50 M
QTN3 0 0 M ,3 50 M
SQT3 0 0 M Y ,3 0 0 M ,3 0M S,3 0 M ,2 8 M S,2 8 M
STRA IGHT OFFSET
18 - 19
STRA IGHT
40 - 43
RIGHT A NGLE
20 - 21
M PX 6 10 0 Y ,6 10 0 ,6 10
M PX 6 2 50 (16 ),6 2 5(16 ),6 2 0 0 Y (16 ),6 2 0Y (16 ),6 2 0 (16 )
STRA IGHT OFFSET
22 - 23
M PX 6 2 0 0 Y ,6 2 0 0 ,6 20 Y ,6 2 0 ,6 2 5,6 2 50
M PX 6 3 0 0 Y ,6 3 0 0 ,6 3 0 ,6 50 (10 )
Kennametal, Inc.
4 - 5
STRA IGHT
32 - 35
RIGHT A NGLE
24 - 25
STRA IGHT OFFSET
26 - 27
STRA IGHT
36 - 39
RIGHT A NGLE
28 - 29
STRA IGHT OFFSET
30 -31
STRA IGHT
40 - 43
PA R T S & A C C ESSOR IES
44
M OD EL C OD ES
45
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 2
Designed and manufactured in the U.S.A.
All tools are designed to each specific
machine as to not limit your equipment’s
capabilities.
Maximum use of each machine’s turret
cone for larger diameter duplex bearings
set around the clamping system. All tools
mount without interference with
neighboring tools.
Recessed spindle configurations reduces
the length of moment arm for longer
bearing life while maximizing tool lengths.
Quality high precision spindle
bearings (ABEC 7 / P4 minimum) are
used on all models for performance,
rigidity and durability for smooth
operation and long life. Sealed/Shielded
bearings used most tools.
Industry proven ER Tooling System for
reliable and controlled machining.
External only or Internal and External
combination coolant options. High
pressure internal coolant option (1,500
PSI [103 bar]).
Bodies are made of high quality steels
with a hardened one piece VDI base for
maximum rigidity and wear resistance.
Black oxide coated and/or melonited for a
professional finish.
Spindle and nut wrenches are included
with all ER Tooling Systems.
Hardened and honed right-angle spiral
bevel and spur cut gears provide for long
life, high strength and quiet operation.
Axial alignment adjustment pins for ±1°
manual adjustments on most models.
Long-life premium grease for optimum
lubrication environment.
Ratio’s available 1:1, 1:2 and 2:1 to
achieve maximum performance output.
Kennametal Modular Quick-Change
Tooling System for reliable and efficient
tool changes.
All tools are packaged with specification
sheets, operating instructions and audittest reports.
High quality seals and o-rings for
protection against external contamination.
See the following catalog pages for
complete dimensional, technical and
operational specifications.
®
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 3
Driven Tools (Mazak Series)
DESIGN & BENEFITS
Driven Tools (Mazak Series)
SUPER QUICK TURN SERIES
SQT100MSY,100MS,100MY,100M,10MS,10
SQT250MSY(16),250MS(16),250MY(16),250M(16),200MSY(16),200MS(16),200MY(16),200M(16)
STANDARD TOOL OPTIONS
Par t No
DT10210600121
DT10410600121
Tool Axis
Right A ngle
Right A ngle Head Reverse
Ge ar Ratio Clam ping Sys te m Coolant Supply
Rotation
1:1
KM-40
Internal / External CW (in) CCW (out)
1:1
KM-40
Internal / External CW (in) CCW (out)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
24.0 lbs.
480 lbf . (2.1 kN)
(10.9 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED INTERNAL COOLANT SPINDLE RUNOUT (TIR)
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 4
STANDARD TOOL OPTIONS
Part No
DT10211400121
DT10411400121
Tool Axis
Right Angle
Right Angle Head Reverse
Gear Ratio
1:1
1:1
Clamping System
ER-32
ER-32
Coolant Supply
Internal / External
internal / external
Rotation
CW (in) CCW (out)
CW (in) CCW (out)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
24.6 lbs.
480 lbf . (2.1 kN)
(10.9 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED INTERNAL COOLANT SPINDLE RUNOUT (TIR)
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 5
Driven Tools (Mazak Series)
SUPER QUICK TURN SERIES
SQT100MSY,100MS,100MY,100M,10MS,10
SQT250MSY(16),250MS(16),250MY(16),250M(16),200MSY(16),200MS(16),200MY(16),200M(16)
Driven Tools (Mazak Series)
SUPER QUICK TURN SERIES
SQT100MSY,100MS,100MY,100M,10MS,10
SQT250MSY(16),250MS(16),250MY(16),250M(16),200MSY(16),200MS(16),200MY(16),200M(16)
STANDARD TOOL OPTIONS*
Part No
DT10110600121
Tool Axis
Straight Offset
Gear Ratio
1:1
Clamping System
KM-40
Coolant Supply
Internal / External
Rotation
CW (in) CW (out)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
16.3 lbs .
580 lbf . (2.6 kN)
(7.4 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
6,000 RPM
INTERNAL COOLANT SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS ADJUSTM ENT ±1º
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 6
STANDARD TOOL OPTIONS
P a r t No
T o o l A x is
G e a r Ra t io
DT 1 0 1 1 1 4 0 0 1 2 1 S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
ER- 3 2
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l C W ( in ) C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
16.2 lbs.
(7.3 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 7
Driven Tools (Mazak Series)
SUPER QUICK TURN SERIES
SQT100MSY,100MS,100MY,100M,10MS,10
SQT250MSY(16),250MS(16),250MY(16),250M(16),200MSY(16),200MS(16),200MY(16),200M(16)
Driven Tools (Mazak Series)
SUPER QUICK TURN SERIES
SQT100MSY,100MS,100MY,100M,10MS,10
SQT250MSY(16),250MS(16),250MY(16),250M(16),200MSY(16),200MS(16),200MY(16),200M(16)
STANDARD TOOL OPTIONS
Part No
DT10310600121
Tool Axis
Straight Offset Head Reverse
Gear Ratio
1:1
Clamping System
KM-40
Coolant Supply
Internal / External
Rotation
CW (in) CW (out)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
15.5 lbs.
(7.0 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 8
STANDARD TOOL OPTIONS
Part No
DT10311400121
Tool Axis
Straight Offset Head Reverse
Gear Ratio
1:1
Clamping System
ER-32
Coolant Supply
Internal / External
Rotation
CW (in) CW (out)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTMENT ±1º
16.0 lbs.
(7.2 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 9
Driven Tools (Mazak Series)
SUPER QUICK TURN SERIES
SQT100MSY,100MS,100MY,100M,10MS,10
SQT250MSY(16),250MS(16),250MY(16),250M(16),200MSY(16),200MS(16),200MY(16),200M(16)
Driven Tools (Mazak Series)
QUICK TURN NEXUS & SUPER QUICK TURN SERIES
QTN200MS,200M,250MS,250M
SQT250MSY,250MS,250MY,250M,200MSY,200MS,200MY,200M,18MSY,18MS,18MY,15MSY,15MS,15MY,15
STANDARD TOOL OPTIONS
Par t No
DT10210600221
DT10410600221
T oo l Axis
Ge ar Ratio Clam p ing Sys te m
Right A ngle
1:1
KM-40
Right A ngle Head Revers e
1:1
KM-40
Co olant Su pp ly
Rotatio n
Internal / Ex ternal CW (in) CCW (out)
Internal / Ex ternal CW (in) CCW (out)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
27.5 lbs.
480 lbf . (2.1 kN)
(12.5 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
6,000 RPM
INTERNAL COOLANT SPINDLE RUNOUT (TIR)
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 10
QTN200MS,200M,250MS,250M
SQT250MSY,250MS,250MY,250M,200MSY,200MS,200MY,200M,18MSY,18MS,18MY,15MSY,15MS,15MY,15
STANDARD TOOL OPTIONS
Par t No
T o o l Axis
Ge ar Ratio Clam p in g Sys te m
DT10211400221
Right A ngle
1:1
ER-32
DT10411400221 Right A ngle Head Rev ers e
1:1
ER-32
Co o lan t Su p p ly
Ro tatio n
Internal / Ex ternal CW (in) CCW (out)
Internal / Ex ternal CW (in) CCW (out)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
28.6 lbs.
480 lbf . (2.1 kN)
(13.0 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 11
Driven Tools (Mazak Series)
QUICK TURN NEXUS & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
QUICK TURN NEXUS & SUPER QUICK TURN SERIES
QTN200MS,200M,250MS,250M
SQT250MSY,250MS,250MY,250M,200MSY,200MS,200MY,200M,18MSY,18MS,18MY,15MSY,15MS,15MY,15
STANDARD TOOL OPTIONS
P a r t No
T o o l A x is
G e a r R a t io
DT 1 0 1 1 0 6 0 0 2 2 1 S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
K M- 40
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l CW ( in ) CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
16.6 lbs.
(7.5 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS ADJUSTMENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 12
QTN200MS,200M,250MS,250M
SQT250MSY,250MS,250MY,250M,200MSY,200MS,200MY,200M,18MSY,18MS,18MY,15MSY,15MS,15MY,15
STANDARD TOOL OPTIONS
P a r t No
T o o l A x is
G e a r Ra t io
DT 1 0 1 1 1 4 0 0 2 2 1 S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
ER- 3 2
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l CW ( in ) CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTMENT ±1º
16.4 lbs.
(7.4 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 13
Driven Tools (Mazak Series)
QUICK TURN NEXUS & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
QUICK TURN NEXUS & SUPER QUICK TURN SERIES
QTN200MS,200M,250MS,250M
SQT250MSY,250MS,250MY,250M,200MSY,200MS,200MY,200M,18MSY,18MS,18MY,15MSY,15MS,15MY,15
STANDARD TOOL OPTIONS
Par t No
DT10310600221
Tool Axis
Ge ar Ratio Clam p ing Sys te m
Straight Of f s et Head Rev ers e
1:1
KM-40
Coolan t Su p p ly
Ro tation
Internal / Ex ternal CW (in) CW (out)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
16.2 lbs.
(7.2 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 14
QTN200MS,200M,250MS,250M
SQT250MSY,250MS,250MY,250M,200MSY,200MS,200MY,200M,18MSY,18MS,18MY,15MSY,15MS,15MY,15
STANDARD TOOL OPTIONS
Par t No
DT10311400221
Tool Axis
Ge ar Ratio Clam p ing Sys te m
Straight Of f s et Head Rev ers e
1:1
ER-32
Coolan t Supply
Rotatio n
Internal / Ex ternal CW (in) CW (out)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
16.0 lbs.
(7.2 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 15
Driven Tools (Mazak Series)
QUICK TURN NEXUS & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
QUICK TURN NEXUS & SUPER QUICK TURN SERIES
QTN400,450M
QTN300M,350M
SQT300MY,300M,30MS,30M,28MS,28M
STANDARD TOOL OPTIONS
P a r t No
DT1 0 2 1 0 5 0 0 6 2 1
T o o l A x is G e a r R a t io
R ig h t A n g le
1 :1
C la m p in g S y s t e m
K M-50
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
48.0 lbs.
1,000 lbf . (4.5 kN)
(21.8 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
4,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 16
QTN400M,450M
QTN300M,350M
SQT300MY,300M,30MS,30M,28MS,28M
STANDARD TOOL OPTIONS
P a r t No
DT 1 0 2 1 1 5 0 0 6 2 1
T o o l A x is G e a r Ra t io
Rig h t A n g le
1 :1
C la m p in g S y s t e m
ER- 4 0
C o o la n t S u p p ly
Ro t a t io n
In te r n a l / Ex te r n a l CW ( in ) CCW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
49.0 lbs.
1,000 lbf . (4.5 kN)
(22.2 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
4,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 17
Driven Tools (Mazak Series)
QUICK TURN NEXUS & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
QUICK TURN NEXUS & SUPER QUICK TURN SERIES
QTN400M,450M
QTN300M,350M
SQT300MY,300M,30MS,30M,28MS,28M
STANDARD TOOL OPTIONS
P ar t No
DT 1 0 1 1 0 5 0 0 6 2 1
T o o l A x is
G e a r Ra t io
S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
K M-50
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l CW ( in ) CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
30.0 lbs.
(13.6 kg)
1,000 lbf. (4.5 kN)
[6,000 Hours L10 @ 4,500 RPM]
4,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 18
QTN400M,450M
QTN300M,350M
SQT300MY,300M,30MS,30M,28MS,28M
STANDARD TOOL OPTIONS
P a r t No
T o o l A x is
G e a r R a t io
DT 1 0 1 1 1 5 0 0 6 2 1 S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
ER- 4 0
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l CW ( in ) CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTMENT ±1º
27.6 lbs.
(12.5 kg)
1,000 lbf. (4.5 kN)
[6,000 Hours L10 @ 4,500 RPM]
4,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 19
Driven Tools (Mazak Series)
QUICK TURN NEXUS & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
MULTIPLEX SERIES
MPX6100Y,6100,610
MPX6250(16),625(16),6200Y(16),620Y(16),620(16)
STANDARD TOOL OPTIONS
P a r t No
DT1 0 2 1 0 6 0 0 3 2 1
T o o l A x is G e a r R a t io
R ig h t A n g le
1 :1
C la m p in g S y s t e m
K M- 4 0
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
25.5 lbs.
480 lbf . (2.1 kN)
(11.6 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 20
MPX6100Y,6100,610
MPX6250(16),625(16),6200Y(16),620Y(16),620(16)
STANDARD TOOL OPTIONS
Par t No
DT10211400321
T o o l A xis
Right A ngle
Ge ar Ratio C lam p in g Sys te m
1:1
ER-32
C o o lan t Su p p ly
Internal / Ex ternal
Ro tatio n
CW (in) CCW (out)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
26.6 lbs .
480 lbf . (2.1 kN)
(12.1 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
6,000 RPM
INTERNAL COOLANT SPINDLE RUNOUT (TIR)
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 21
Driven Tools (Mazak Series)
MULTIPLEX SERIES
Driven Tools (Mazak Series)
MULTIPLEX SERIES
MPX6100Y,6100,610
MPX6250(16),625(16),6200Y(16),620Y(16),620(16)
STANDARD TOOL OPTIONS
P a r t No
T o o l A x is
G e a r Ra t io
DT 1 0 1 1 0 6 0 0 3 2 1 S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
K M-4 0
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l CW ( in ) CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
15.5 lbs.
(7.0 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 22
MPX6100Y,6100,610
MPX6250(16),625(16),6200Y(16),620Y(16),620(16)
STANDARD TOOL OPTIONS
P a r t No
DT1 0 1 1 1 4 0 0 3 2 1
T o o l A x is
G e a r Ra t io
S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
ER- 3 2
C o o la n t S u p p ly
Ro t a t io n
In te r n a l / Ex te r n a l CW ( in ) CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
16.0 lbs.
(7.2 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 23
Driven Tools (Mazak Series)
MULTIPLEX SERIES
Driven Tools (Mazak Series)
MULTIPLEX SERIES
MPX6200Y,6200,620Y,620,625,6250
STANDARD TOOL OPTIONS
P a r t No
DT 1 0 2 1 0 6 0 0 4 2 1
T o o l A x is G e a r R a t io
Rig h t A n g le
1 :1
C la m p in g S y s t e m
K M- 4 0
C o o la n t S u p p ly
Ro t a t io n
In te r n a l / Ex te r n a l CW ( in ) CC W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
[69.37]
2.73
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
27.8 lbs.
480 lbf . (2.1 kN)
(12.6 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 24
MPX6200Y,6200,620Y,620,625,6250
STANDARD TOOL OPTIONS
P a r t No
DT1 0 2 1 1 4 0 0 4 2 1
T o o l A x is G e a r R a t io
R ig h t A n g le
1 :1
C la m p in g S y s t e m
ER - 3 2
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
[69.37]
2.73
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
28.8 lbs.
480 lbf . (2.1 kN)
(13.1 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
6,000 RPM
INTERNAL COOLANT SPINDLE RUNOUT (TIR)
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 25
Driven Tools (Mazak Series)
MULTIPLEX SERIES
Driven Tools (Mazak Series)
MULTIPLEX SERIES
MPX6200Y,6200,620Y,620,625,6250
STANDARD TOOL OPTIONS
P a r t No
T o o l A x is
G e a r Ra t io
DT 1 0 1 1 0 6 0 0 4 2 1 S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
K M-4 0
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l CW ( in ) CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
16.0 lbs.
(7.2 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 26
MPX6200Y,6200,620Y,620,625,6250
STANDARD TOOL OPTIONS
P a r t No
DT1 0 1 1 1 4 0 0 4 2 1
T o o l A x is
G e a r Ra t io
S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
ER- 3 2
C o o la n t S u p p ly
Ro t a t io n
In te r n a l / Ex te r n a l CW ( in ) CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
16.0 lbs.
(7.2 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
±0.02"
(±0.5mm)
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 27
Driven Tools (Mazak Series)
MULTIPLEX SERIES
Driven Tools (Mazak Series)
MULTIPLEX SERIES
MPX6300Y,6300,630
MPX650(10)
STANDARD TOOL OPTIONS
P a r t No
DT1 0 2 1 0 5 0 0 5 2 1
T o o l A x is G e a r R a t io
R ig h t A n g le
1 :1
C la m p in g S y s t e m
K M- 5 0
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
53.5 lbs.
1,000 lbf . (4.5 kN)
(24.3 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
4,000 RPM
INTERNAL COOLANT SPINDLE RUNOUT (TIR)
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A .
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 28
MPX6300Y,6300,630
MPX650(10)
STANDARD TOOL OPTIONS
P a r t No
DT1 0 2 1 1 5 0 0 5 2 1
T o o l A x is G e a r R a t io
Rig h t A n g le
1 :1
C la m p in g S y s t e m
ER- 4 0
C o o la n t S u p p ly
Ro t a t io n
In te r n a l / Ex te r n a l CW ( in ) CCW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
55.0 lbs.
1,000 lbf . (4.5 kN)
(25.0 kg) [6,000 Hours L10 @ 4,500 RPM]
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTM ENT ±1º
4,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A .
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 29
Driven Tools (Mazak Series)
MULTIPLEX SERIES
Driven Tools (Mazak Series)
MULTIPLEX SERIES
MPX6300Y,6300,630
MPX650(10)
STANDARD TOOL OPTIONS
P a r t No
DT 1 0 1 1 0 5 0 0 5 2 1
T o o l A x is
G e a r Ra t io
S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
K M- 5 0
C o o la n t S u p p ly
Ro t a t io n
In te r n a l / Ex te r n a l CW ( in ) CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
27.5 lbs.
(12.5 kg)
1,000 lbf. (4.5 kN)
[6,000 Hours L10 @ 4,500 RPM]
4,000 RPM
INTERNAL COOLANT SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
N.A.
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 30
MPX6300Y,6300,630
MPX650(10)
STANDARD TOOL OPTIONS
P a r t No
DT 1 0 1 1 1 5 0 0 5 2 1
T o o l A x is
G e a r Ra t io
S tr a ig h t O f f s e t
1 :1
C la m p in g S y s t e m
ER- 4 0
C o o la n t S u p p ly
Ro t a t io n
In te r n a l / Ex te r n a l CW ( in ) CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTIONS: GEAR RATIO 1:2, GEAR RATIO 2:1, EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
25.4 lbs.
(11.5 kg)
1,000 lbf. (4.5 kN)
[6,000 Hours L10 @ 4,500 RPM]
4,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
N.A.
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 31
Driven Tools (Mazak Series)
MULTIPLEX SERIES
Driven Tools (Mazak Series)
MULTIPLEX & SUPER QUICK TURN SERIES
MPX6100Y,6100,610 MPX6250(16),625(16),6200Y(16),620Y(16),620(16)
SQT100MSY,100MS,100MY,100M,10MS,10 SQT250MSY(16),250MS(16),250MY(16),250M(16),200MSY(16),200MS(16),200MY(16),200M(16)
STANDARD TOOL OPTIONS
P a r t No
DT1 0 6 1 0 6 0 0 3 2 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
K M-4 0
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
7.4 lbs.
(3.4 kg)
580 lbf . (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS ADJUSTM ENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A .
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 32
MPX6100Y,6100,610 MPX6250(16),625(16),6200Y(16),620Y(16),620(16)
SQT100MSY,100MS,100MY,100M,10MS,10 SQT250MSY(16),250MS(16),250MY(16),250M(16),200MSY(16),200MS(16),200MY(16),200M(16)
STANDARD TOOL OPTIONS
P a r t No
DT1 0 6 1 1 4 0 0 3 2 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
ER - 3 2
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
8.3 lbs.
(3.8 kg)
580 lbf . (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS ADJUSTM ENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A .
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 33
Driven Tools (Mazak Series)
MULTIPLEX & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
MULTIPLEX & SUPER QUICK TURN SERIES
MPX6100Y,6100,610 MPX6250(16),625(16),6200Y(16),620Y(16),620(16)
SQT100MSY,100MS,100MY,100M,10MS,10 SQT250MSY(16),250MS(16),250MY(16),250M(16),200MSY(16),200MS(16),200MY(16),200M(16)
STANDARD TOOL OPTIONS
P a r t No
DT1 0 6 1 0 6 0 0 3 1 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
K M-4 0
C o o la n t S u p p ly
Ex te r n a l
R o t a t io n
C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: INTERNAL / EXTERNAL COOLANT SUPPLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTMENT ±1º
7.4 lbs.
(3.4 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
N.A.
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A.
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 34
MPX6100Y,6100,610 MPX6250(16),625(16),6200Y(16),620Y(16),620(16)
SQT100MSY,100MS,100MY,100M,10MS,10 SQT250MSY(16),250MS(16),250MY(16),250M(16),200MSY(16),200MS(16),200MY(16),200M(16)
STANDARD TOOL OPTIONS
P a r t No
DT1 0 6 1 1 4 0 0 3 1 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
ER - 3 2
C o o la n t S u p p ly
Ro t a t io n
Ex te r n a l
CW ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: INTERNAL / EXTERNAL COOLANT SUPPLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTMENT ±1º
8.3 lbs.
(3.8 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
N.A.
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A.
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 35
Driven Tools (Mazak Series)
MULTIPLEX & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
MULTIPLEX, NEXUS & SUPER QUICK TURN SERIES
MPX6200Y,6200,620Y,620,625,6250
QTN200MS,200M,250MS,250M SQT250MSY,250MS,250MY,250M,200MSY,200MS,200MY,200M,18MSY,18MS,18MY,15MSY,15MS,15MY,15
STANDARD TOOL OPTIONS
P a r t No
DT1 0 6 1 0 6 0 0 4 2 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
K M- 4 0
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
7.4 lbs.
(3.4 kg)
580 lbf . (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS ADJUSTM ENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A .
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 36
MPX6200Y,6200,620Y,620,625,6250
QTN200MS,200M,250MS,250M SQT250MSY,250MS,250MY,250M,200MSY,200MS,200MY,200M,18MSY,18MS,18MY,15MSY,15MS,15MY,15
STANDARD TOOL OPTIONS
P a r t No
DT1 0 6 1 1 4 0 0 4 2 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
ER - 3 2
C o o la n t S u p p ly
R o t a t io n
In te r n a l / Ex te r n a l C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
8.3 lbs.
(3.8 kg)
580 lbf . (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
1,500 PSI
(103.4 bar)
0.0008" @ 2.0"
(0.02mm @ 50mm)
SPINDLE SQUARENESS ADJUSTM ENT ±1º
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A .
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 37
Driven Tools (Mazak Series)
MULTIPLEX, NEXUS & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
MULTIPLEX, NEXUS & SUPER QUICK TURN SERIES
MPX6200Y,6200,620Y,620,625,6250
QTN200MS,200M,250MS,250M SQT250MSY,250MS,250MY,250M,200MSY,200MS,200MY,200M,18MSY,18MS,18MY,15MSY,15MS,15MY,15
STANDARD TOOL OPTIONS
P a r t No
DT1 0 6 1 0 6 0 0 4 1 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
K M-40
C o o la n t S u p p ly
R o t a t io n
Ex te r n a l
C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: INTERNAL / EXTERNAL COOLANT SUPPLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTMENT ±1º
7.4 lbs.
(3.4 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
N.A.
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A.
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 38
MPX6200Y,6200,620Y,620,625,6250
QTN200MS,200M,250MS,250M SQT250MSY,250MS,250MY,250M,200MSY,200MS,200MY,200M,18MSY,18MS,18MY,15MSY,15MS,15MY,15
STANDARD TOOL OPTIONS
P a r t No
DT1 0 6 1 1 4 0 0 4 1 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
ER - 3 2
C o o la n t S u p p ly
R o t a t io n
Ex te r n a l
C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: INTERNAL / EXTERNAL COOLANT SUPPLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTMENT ±1º
8.3 lbs.
(3.8 kg)
580 lbf. (2.6 kN)
[6,000 Hours L10 @ 4,500 RPM]
6,000 RPM
N.A.
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A.
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 39
Driven Tools (Mazak Series)
MULTIPLEX, NEXUS & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
MULTIPLEX, NEXUS & SUPER QUICK TURN SERIES
MPX6300Y,6300,630 MPX650(10)
QTN400M,450M QTN300M,350M SQT300MY,300M,30MS,30M,28MS,28M
STANDARD TOOL OPTIONS
P a r t No
D T1 0 6 1 0 5 0 0 5 2 1
T o o l A x is
S tr a ig h t
G e a r Ra t io
1 :1
C la m p in g S y s t e m
K M- 50
C o o la n t S u p p ly
Ro t a t io n
In te r n a l / Ex te r n a l C W ( in ) C CW ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
16.0 lbs.
(7.3 kg)
1,000 lbf. (4.5 kN)
[6,000 Hours L10 @ 4,500 RPM]
4,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
N.A.
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 40
MPX6300Y,6300,630 MPX650(10)
QTN400M,450M QTN300M,350M SQT300MY,300M,30MS,30M,28MS,28M
STANDARD TOOL OPTIONS
P a r t No
DT 1 0 6 1 1 5 0 0 5 2 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
ER- 4 0
C o o la n t S u p p ly
Ro t a t io n
In te r n a l / Ex te r n a l CW ( in ) CC W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: EXTERNAL COOLANT SUPPLY ONLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
13.5 lbs.
(6.1 kg)
1,000 lbf. (4.5 kN)
[6,000 Hours L10 @ 4,500 RPM]
4,000 RPM
1,500 PSI
(103.4 bar)
SPINDLE RUNOUT (TIR) SPINDLE SQUARENESS
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
ADJUSTMENT ±1º
N.A.
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 41
Driven Tools (Mazak Series)
MULTIPLEX, NEXUS & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
MULTIPLEX, NEXUS & SUPER QUICK TURN SERIES
MPX6300Y,6300,630 MPX650(10)
QTN400M,450M QTN300M,350M SQT300MY,300M,30MS,30M,28MS,28M
STANDARD TOOL OPTIONS
P a r t No
DT1 0 6 1 0 5 0 0 5 1 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
K M-50
C o o la n t S u p p ly
R o t a t io n
Ex te r n a l
C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: INTERNAL / EXTERNAL COOLANT SUPPLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTMENT ±1º
16.0 lbs.
(7.3 kg)
1,000 lbf. (4.5 kN)
[6,000 Hours L10 @ 4,500 RPM]
4,000 RPM
N.A.
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A.
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 42
MPX6300Y,6300,630 MPX650(10)
QTN400M,450M QTN300M,350M SQT300MY,300M,30MS,30M,28MS,28M
STANDARD TOOL OPTIONS
P a r t No
DT1 0 6 1 1 5 0 0 5 1 1
T o o l A x is
S tr a ig h t
G e a r R a t io
1 :1
C la m p in g S y s t e m
ER - 4 0
C o o la n t S u p p ly
R o t a t io n
Ex te r n a l
C W ( in ) C C W ( o u t)
*TOOLS ALSO AVAILABLE WITH OPTION: INTERNAL / EXTERNAL COOLANT SUPPLY
GENERAL PERFORMANCE SPECIFICATIONS
WEIGHT
AXIAL LOAD
INPUT SPEED
INTERNAL COOLANT
SPINDLE RUNOUT (TIR)
SPINDLE SQUARENESS
ADJUSTMENT ±1º
13.5 lbs.
(6.1 kg)
1,000 lbf. (4.5 kN)
[6,000 Hours L10 @ 4,500 RPM]
4,000 RPM
N.A.
0.0008" @ 2.0"
(0.02mm @ 50mm)
0.0008" @ 2.0"
(0.02mm @ 50mm)
N.A.
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 43
Driven Tools (Mazak Series)
MULTIPLEX, NEXUS & SUPER QUICK TURN SERIES
Driven Tools (Mazak Series)
PARTS & ACCESSORIES
TOOL
WRENCH WRENCH WRENCH
NUT
NUT
O-RING
O-RING PLUNGER ACCESS
SPINDLE
KM KIT
TYPE
(NUT) (SPINDLE) (SPINDLE) (ICL/ECL) (ECL)
(COOLANT) (VDI)
KIT
PLUG KIT
RA
ER-32
80433
80080
80685
80432 80431 ----80118
80055
--------SO
ER-32
80433
80080
80688
80432
80431
-----
80118
80055
-----
-----
SS
ER-32
80433
80080
80712
80432
80431
-----
80118
80055
-----
-----
RA
ER-40
80436
80191
80686
80435
80434
-----
80308
80309
-----
-----
SO
ER-40
80436
80191
80687
80435
80434
-----
80308
80309
-----
-----
SS
ER-40
80436
80191
80713
80435
80434
-----
80308
80309
-----
-----
RA
KM-40
-----
-----
-----
-----
-----
80502-1
80118
80055
80373-1
80781-1
SO
KM-40
-----
-----
-----
-----
-----
80502-1
80118
80055
80412-1
80781-1
SS
KM-40
-----
-----
-----
-----
-----
80502-1
80118
80055
80412-1
80781-1
RA
KM-50
-----
-----
-----
-----
-----
80503-1
80308
80309
80376-1
80780-1
SO
KM-50
-----
-----
-----
-----
-----
80503-1
80308
80309
80376-1
80780-1
SS
KM-50
-----
-----
-----
-----
-----
80503-1
80308
80309
80376-1
80780-1
RA = RIGHT ANGLE
SO = STRAIGHT OFFSET
SS = STRAIGHT
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 44
DT1
O1
1
O5
OO5
2
1
T OOL T Y PE
DT1 = D riven / Live / R o t ary
T OOL A X IS
0 1 = St raig ht Of f set
0 2 = Rig ht A ng le
0 3 = Reversed St raig ht Of f set [ M achines 0 0 1,0 0 2 ]
0 4 = Reversed R ig ht A ng le [ M achines 0 0 1,0 0 2 ]
0 6 = St raig ht
R A T IO
1= 1X 1
2 = 1 X 2 [ TOOL A X IS 0 1,0 2 ,0 3 ,0 4 ]
4 = 2 X 1 [ TOOL A X IS 0 1,0 2 ,0 3 ,0 4 ]
C LA M P I N G S Y S T E M
0 5 = KM -50 [ M achines 0 0 5,0 0 6 ]
0 6 = KM -4 0
0 7 = KM -3 2 [ To o l A xis 0 1&0 3 o n M achines 0 0 1,0 0 2 ,0 0 3 ,0 0 4 in 1:2 R at io ]
13 = ER-2 5 [ To o l A xis 0 1&0 3 o n M achines 0 0 1,0 0 2 ,0 0 3 ,0 0 4 in 1:2 R at io ]
14 = ER-3 2
15 = ER -4 0 [ M achines 0 0 5,0 0 6 ]
M A C HI N E M O D E L( S )
0 0 1 = M azak SQT 10 0 M S [ 10 M / M S, 10 0 M / M S/ M Y / M SY , 2 0 0 (16 )M / M S/ M Y / M SY , 2 50 (16 )M / M Y / M S/ M SY ]
0 0 2 = M azak NEX U S / SQT 2 0 0 M S [ 15M / M S/ M Y / M SY , 18 M / M S/ M Y / M SY , 2 0 0 M / M S/ M Y / M SY , 2 50 M / M S/ M Y / M SY ]
0 0 3 = M azak M ult ip lex 6 10 0 [ 6 10 0 Y ,6 10 0 ,6 10 ,6 2 50 (16 ),6 2 5(16 ),6 2 0 0 Y (16 ),6 2 0 0 (16 ),6 2 0 Y (16 ),6 2 0 (16 )]
0 0 4 = M azak M ult ip lex 6 2 0 0 [ 6 2 50 ,6 2 5,6 2 0 0 Y ,6 2 0 0 ,6 2 0 Y ,6 2 0 ]
0 0 5 = M azak M ult ip lex 6 3 0 0 [ 6 3 0 0 Y ,6 3 0 0 ,6 3 0 ,6 50 (10 )]
0 0 6 = M azak NEX U S / SQT 3 0 0 M [ 2 8 M / M S, 3 0 M / M S, 3 0 0 M / M S/ M Y , 3 0 0 M , 3 50 M , 4 0 0 M , 4 50 M ]
C O O LA N T S U P P LY
1 = Ext ernal Only
2 = Int ernal & Ext ernal
B EA R IN G
1 = St and ard / Shield ed / Sealed
SPECIALS AVAILABLE UPON REQUEST
Kennametal, Inc.
Phone: (800) 446-7738
Fax: (888) 505-5050
www.kennametal.com
Rev.: 02/06 Page: 45
Driven Tools (Mazak Series)
MODEL CODES