Eminence catalog 2010

Transcription

Thank you for considering
Eminence products!
We are proud of our long history of manufacturing loudspeakers here in Eminence, Kentucky.
Each product is made by hand with quality, value and service in mind. We know that real
performance and tone only come from pride, passion and attention to detail. We all thank you
for helping to keep us doing what we love, and for keeping the American dream alive!
pro audio
PROFESSIONAL series. . . . . . . . . . . . . . .
NEODYMIUM series. . . . . . . . . . . . . . . . .
AMERICAN STANDARD. . . . . . . . . . . . . . .
HF DRIVERS. . . . . . . . . . . . . . . . . . . . . . . .
SUPERTWEETERs. . . . . . . . . . . . . . . . . . . .
HORN FLARES. . . . . . . . . . . . . . . . . . . . . .
CROSSOVERS . . . . . . . . . . . . . . . . . . . . . .
guitar
4
12
18
28
29
29
31
For a complete list of Eminence distributors
and to access our US dealer finder, please visit
http://www.eminence.com/wheretobuy.asp
FOOTNOTES
* Please consult www.eminence.com for specifications of models with alternative impedances.
** Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air,
nontemperature-controlled environment.
*** The average output across the usable frequency range when applying 1W/1m into the nominal impedance. Ie: 2.83 V/8 ohms,
4 V/16 ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m
using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated)
mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring
for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces
(three with custom-made wedges).
exclusive fdm technology . . . . . . . .
acoustic series. . . . . . . . . . . . . . . . . . .
legend series. . . . . . . . . . . . . . . . . . . . .
Patriot series. . . . . . . . . . . . . . . . . . . . .
redcoat series. . . . . . . . . . . . . . . . . . . .
BASS GUITAR. . . . . . . . . . . . . . . . . . . . . . .
32
34
35
37
42
46
REFERENCE
GUITAR SPEAKER tone guide. . . . . . . . . 50
LOUDSPEAKER DATA explained. . . . . . . 52
Designing enclosures. . . . . . . . . . . . . 54
**** BETA 8CX, 10CX, 12CX and ACOUSTINATOR™ CX2008 are coaxial speakers with tweeter sold separately. Published Usable
Frequency response contingent upon use of APT 50 HF Driver.
***** Multiple units exceeded published rating evaluated under AES500 and AES800 noise sources and test standards while
mounted on Eminence’s TI-2000 horn in a nontemperature-controlled environment.
****** The average on axis output across the entire usable frequency range when applying 1W/1m into the nominal impedance
while mounted on a Community SH494 horn measured with: LMS (software calibrated) using a 0.25" [6.4mm] supplied
microphone mounted 1m from horn mouth, Hafler P1500 Trans-Nova amplifier, 2700 cu. ft. chamber w/fiberglass on all six
surfaces (three with custom made wedges). Plane-wave tube response and impedance curves measured with LMS on a 0.75"
[19.1mm] diameter tube with adapter to allow for smooth transition to throat diameter and 1W/1m into nominal impedance.
Prices and Specifications Subject to Change Without Notice.
professional series
For over 40 years, Eminence
Professional series loudspeakers
have been the brand of choice
in audio systems throughout
the world.
the thickness of that coating to within 0.001”; critical when working with
close tolerance transducer motor designs. We then add front and rear sealing
gaskets on each model to accommodate front or rear loading.
There are 26 unique models available in our Professional series. Each was
designed with a specific application in mind. From heavy-duty subwoofers, low
distortion woofers, and super high-power woofers to lightweight neodymium
transducers in truncated frames for line arrays, there is an Eminence
Professional model for your application. Each product includes a lot of Made
From your local VFW Hall, Moose Lodge, and local church, to aircraft carriers, NFL
in the USA pride, along with a Seven Year Warranty against manufacturer’s
and soccer league stadiums, NBA and NCAA arenas, and on the road with today’s
defects*. With over 1,200 USA dealers and distributors worldwide you can
greatest artists, no other loudspeaker brand has been so widely depended upon
easily find them in a store near you.
for performance and reliability.
*Warranty policy may vary outside of the continental United States and Canada.
Each Eminence Professional model can be identified by its cast aluminum
Eminence chassis that is lightweight and strong. Aluminum does not conduct
the magnetic field out of the gap, thereby making the motor strength higher and
the stray magnetic field lower. We coat each chassis and all metal components
with an epoxy-acrylic finish using our in-house e-coat process. We can control
Check with your local distributor for warranty details.
lab 12
definimax 4015lf
delta pro 15a
kappa pro 15A
kappa pro 15lf
kilomax pro 15a
LAB 15
omega pro 15a
definimax 4018lf
delta pro18a
delta pro18C
kilomax pro 18a
omega pro 18a
omega pro 18c
sigma pro 18A
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
midrange usage
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
mid bass usage
Kappa Pro 12A
j
j
j
j
j
j
j
j
j
j
woofer usage
delta pro 12a
subwoofer usage
definimax 4012ho
horn loading
Kappa Pro 10A
scoop loading
delta pro 8b
reflex box
delta pro 8a
closed box
compatibility
j
j
j
j
j
j
j
5
professional series
DELTA PRO-8A
KAPPA PRO-10A
DEFINIMAX™ 4012HO
SPECIFICATION
DELTA PRO-8A
KAPPA PRO-10A
DEFINIMAX™ 4012HO
Nominal Basket Diameter
8’’, 203mm
10”, 254mm
12”, 304.8mm
Nominal Impedance*
8 or 16 ohms
8 ohms
8 ohms
Watts
225W
500W
600W
Music Program
450W
1000W
1200W
Resonance
69Hz
46Hz
46Hz
Usable Frequency Range
100Hz-3kHz
102Hz-2kHz
49Hz-2.5kHz
Sensitivity***
97.8
97
94
Magnet Weight
59 oz.
80 oz.
109 oz.
Gap Height
0.310’’, 7.95mm
0.375”, 9.53mm
0.375”, 9.53mm
Voice Coil Diameter
2’’, 50.8mm
3”, 76.2mm
4”, 101.6mm
Resonant Frequency (fs)
69Hz
46Hz
46Hz
DC Resistance (Re)
5.4
6.50
5.85
Coil Inductance (Le)
0.82mH
1.15mH
1.17mH
Mechanical Q (Qms)
6.43
10.10
5.74
Electromagnetic Q (Qes)
0.20
0.20
0.38
Total Q (Qts)
0.22
0.20
0.35
Compliance Equivalent Volume (Vas)
18.32 liters / .65 cu.ft.
52.2 liters / 1.8 cu.ft.
Peak Diaphragm Displacement Volume (Vd)
66cc
110cc
342cc
Mechanical Compliance of Suspension (Cms)
0.35mm/N
0.31mm/N
0.14mm/N
BL Product (BL)
14.1 T-M
18.8 T-M
19.6 T-M
Diaphragm Mass Inc. Airload (Mms)
19 grams
38 grams
86 grams
Efficiency Bandwidth Product (EBP)
307
230
121
Maximum Linear Excursion (Xmax)
3.0mm
3.2mm
6.2mm
Surface Area of Cone (Sd)
218.2 cm2
344.9 cm2
552.0 cm2
Maximum Mechanical Limit (Xlim)
8.0mm
10.9mm
11.2mm
Sealed
8-16 liters / .30-.60 cu.ft.
7-9.9 liters/0.25-0.35 cu.ft.
26-31 liters/ 0.9-1.1 cu.ft.
Vented
10-16 liters/.40-.60 cu.ft.
12-28 liters/0.43-1 cu.ft.
36-79 liters/ 1.3-2.8 cu.ft.
Driver Volume Displaced
63.7 cu.in / 1.04 liters
Overall Diameter
8.02’’, 203.71mm
10.25”, 260.4mm
12.38”, 314.3mm
Baffle Hole Diameter
7.36’’, 186.9mm
9.13”, 231.8mm
11.06”, 281mm
Front Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
Mounting Holes Diameter
0.28’’, 7.1mm
0.28”, 7.1mm
0.28”, 7.1mm
Mounting Holes B.C.D.
8.60’’, 218.4mm
9.63”, 244.5mm
11.59”, 294.3mm
Depth
3.75’’, 95mm
4.33”, 110mm
5.32”, 135mm
Net Weight
10.0 lbs, 4.5 kg
15.3 lbs., 6.9 kg
22.5 lbs., 10.2 kg
Shipping Weight
11 lbs, 4.9 kg
16.4 lbs., 7.4 kg
29 lbs., 13.1 kg
Coil Construction
Copper voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Polyimide former
Magnet Composition
Ferrite magnet
Ferrite magnet
Ferrite magnet
Core Details
Vented and extended core
Vented core
Undercut with copper shorting ring and
Basket Materials
Die-cast aluminum basket
Cone Composition
Paper cone
Paper Cone
Paper Cone
Cone Edge Composition
Cloth cone edge
Cloth cone edge
Cloth cone edge
Dust Cap Composition
Solid composition paper dust cap
Pop-on dust cap
Power Rating**
THIELE & SMALL PARAMETERS
MOUNTING INFORMATION
Recommended Enclosure Volume
MATERIALS OF CONSTRUCTION
Core Periphery Ventilation
6
* Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.
DELTA PRO-12A
KAPPA PRO-12A
LAB12
DELTA PRO-12A
KAPPA PRO-12A
LAB12
12”, 304.8mm
12”, 304.8mm
12”, 304.8mm
8 ohms
8 ohms
6 ohms
400W
500W
400W
800W
1000W
800W
51Hz
37Hz
22Hz
52Hz-4.5kHz
57Hz-2.8kHz
25Hz-125Hz
99.2
97.1
89.2
80 oz.
80 oz.
160 oz.
0.375”, 9.53mm
0.375”, 9.53mm
0.375”, 9.53mm
2.5”, 63.5mm
3”, 76.2mm
2.5”, 63.5mm
51Hz
37Hz
22Hz
5.71
5.46
4.29
0.84mH
1.22mH
1.48mH
7.56
6.93
13.32
0.37
0.25
0.39
0.35
0.24
0.38
242cc
249cc
659cc
0.21mm/N
0.32mm/N
0.35mm/N
15.3 T-M
17.3 T-M
15.0 T-M
48 grams
59 grams
146 grams
138
148
56
4.6mm
4.8mm
13.0mm
532.4 cm2
519.5 cm2
506.7 cm2
13.7mm
14.8mm
22mm
28-35 liters/1-1.25 cu.ft.
N/A
22.7-28.3 liters/ 0.8-1 cu.ft.
31-91 liters/1.1-3.2 cu.ft.
17-34 liters/0.6-1.2 cu.ft.
45.3-101.9 liters/1.6-3.6 cu.ft.
12.38”, 314.5mm
12.38”, 314.5mm
12.32”, 312.8mm
11.07”, 281mm
11.07”, 281.1mm
10.98”, 278.9mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
0.27”, 6.9mm
0.26”, 6.5mm
0.26”, 6.6mm
11.57”, 293.8mm
11.57”, 293.8mm
11.77”, 299mm
6.22”, 158mm
6.22”, 158mm
6.44”, 164mm
16.3 lbs., 7.4 kg
16.6 lbs., 7.5 kg
22 lbs., 10 kg
18 lbs., 8.2 kg
18.4 lbs., 8.4 kg
23.8 lbs., 10.8 kg
Aluminum voice coil
Copper voice coil
Copper voice coil
Polyimide former
Polyimide former
Polyimide former
Ferrite magnet
Ferrite magnet
Double stacked 80 oz. ferrite magnets
Vented core
12-spoke die-cast aluminum basket
Paper Cone
Paper Cone
Kevlar-reinforced paper cone
Cloth cone edge
Cloth cone edge
Foam cone edge
Dual inverted dust caps
WWW.EMINENCE.COM
7
professional series
DEFINIMAX™ 4015LF
DELTA PRO-15A
KAPPA PRO-15A
SPECIFICATION
DEFINIMAX™ 4015LF
DELTA PRO-15A
KAPPA PRO-15A
15”, 381mm
15”, 381mm
15”, 381mm
Nominal Impedance*
8 ohms
8 ohms
8 ohms
Watts
700W
400W
500W
Music Program
1400W
800W
1000W
Resonance
42Hz
42Hz
47Hz
35Hz-1.2kHz
54Hz-4.2kHz
46Hz-4kHz
Sensitivity***
96
101.6
101
Magnet Weight
109 oz.
80 oz.
80 oz.
Gap Height
0.375”, 9.53mm
0.375”, 9.53mm
0.375”, 9.53mm
Voice Coil Diameter
4”, 101.6mm
2.5”, 63.5mm
3”, 76.2mm
42Hz
42Hz
47Hz
DC Resistance (Re)
5.04
5.71
5.23
1.49mH
0.83mH
1.01mH
Mechanical Q (Qms)
6.73
4.73
8.01
0.54
0.44
0.40
Total Q (Qts)
0.5
0.40
0.38
786cc
368cc
274cc
0.11mm/N
0.24mm/N
0.16mm/N
BL Product (BL)
18.4 T-M
14.5 T-M
16.6 T-M
139 grams
61 grams
72 grams
77
95
118
9.0mm
4.3mm
3.2mm
872.9 cm2
856.3 cm2
856.3 cm2
15.5mm
13.7mm
13.2mm
Sealed
48-57 liters/ 1.7-2.0 cu.ft.
28-42.5 liters/1-1.5 cu.ft.
N/A
Vented
82-181 liters/ 2.9-6.4 cu.ft.
57-133 liters/2-4.7 cu.ft.
54-184 liters/1.9-6.5 cu.ft.
239 cu.in / 3.92 liters
Overall Diameter
15.21”, 386.3mm
15.32”, 389mm
15.32”, 389.1mm
14.0”, 355.6mm
14.0”, 356mm
14.0”, 355.6mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.28”, 7.1mm
0.28”, 7.1mm
0.28”, 7.1mm
14.56”, 369.8mm
14.56”, 369.9mm
14.56”, 369.9mm
Depth
6.56”, 166.7mm
6.06”, 154mm
6.06”, 154mm
Net Weight
23.7 lbs., 10.8 kg
16.6 lbs., 7.5 kg
16.9 lbs., 7.7 kg
Shipping Weight
26 lbs., 11.8 kg
19.1 lbs., 8.7 kg
19.5 lbs., 8.9 kg
Coil Construction
Copper voice coil
Aluminum voice coil
Aluminum voice coil
Coil Former
Polyimide former
Polyimide former
Polyimide former
Magnet Composition
Ferrite magnet
Ferrite magnet
Ferrite magnet
Core Details
Undercut with copper shorting ring and
Vented core
Power Rating**
Core Periphery Ventilation
8
Basket Materials
Cone Composition
Acrylic Wetlook Paper Cone
Paper Cone
Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Acrylic wetlook paper dust cap
KAPPA PRO-15LF-2
KILOMAX® PRO 15A
LAB15
KAPPA PRO-15LF-2
KILOMAX® PRO 15A
LAB15
15”, 381mm
15”, 381mm
15”, 381.0mm
8 ohms
8 ohms
6 ohms
600W
1250W
600W
1200W
2500W
1200W
35Hz
41Hz
28Hz
38Hz-1.8kHz
44Hz-800Hz
20Hz-125Hz
97.8
95.5
88.5
120 oz.
109 oz.
160 oz.
0.375”, 9.53mm
0.375”, 9.53mm
0.375”, 9.53mm
3”, 76.2mm
4”, 101.6mm
3.0”, 76.2mm
35Hz
41Hz
28Hz
6.5
4.97
4.9
1.40mH
1.78mH
3.23mH
7.3
8.80
5.36
0.32
0.40
.37
.30
0.39
.35
103.61 liters / 3.7 cu.ft.
507cc
677cc
968cc
0.20mm/N
0.15mm/N
0.11mm/N
21.6 T-M
17.7 T-M
26.7 T-M
102 grams
98 grams
308 grams
112
103
75
6.7mm
7.9mm
11.8mm
856.3cm2
856.3 cm2
823.7 cm2
18.0mm
13.5mm
22mm
N/A
N/A
35-108 liters/1.2-3.8 cu.ft.
76.5-164 liters/2.7-5.8 cu.ft.
82-176 liters/2.9-6.2 cu.ft.
71-290 liters/2.5-10.3 cu.ft.
15.21”, 386.4mm
15.21”, 386.3mm
15.34”, 389.6mm
14.0”, 355.5mm
14.0”, 355.6mm
14.00”, 355.5mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
N/A
0.28”, 7.1mm
0.28”, 7.1mm
0.26”, 6.6mm
14.56”, 369.9mm
14.56”, 369.8mm
14.70”, 373.5mm
6.57”, 167mm
6.42”, 163mm
7.75”, 197mm
22.3 lbs., 10.1 kg
24.7 lbs., 11.2 kg
23.8 lbs., 10.80 kg
24.8lbs., 11.3 kg
27.1 lbs., 12.3 kg
26 lbs, 11.8 kg
Copper voice coil
Copper voice coil
Copper voice coil
Polyimide former
Polyimide former
AL former
Ferrite magnet
Ferrite magnet
Double stacked 80 oz. ferrite magnets
Extended core with Core Periphery Ventilation
Paper Cone
Paper Cone
Kevlar-reinforced paper cone
Cloth cone edge
Cloth cone edge
Foam cone edge
Porous cloth top spider/ heatsink
Acrylic wetlook Solid composition paper dust cap
WWW.EMINENCE.COM
9
professional series
OMEGA PRO-15A
DEFINIMAX™ 4018LF
DELTA PRO-18A
SPECIFICATION
OMEGA PRO-15A
DEFINIMAX™ 4018LF
DELTA PRO-18A
15”, 381mm
18”, 457.2mm
18’’, 457mm
Nominal Impedance*
8 ohms
8 ohms
8 or 4 ohms
Watts
800W
800W
500W
Music Program
1600W
1600W
1000W
Resonance
33Hz
32Hz
28Hz
51Hz-1.7kHz
36Hz-200Hz
37Hz-250Hz
Sensitivity***
97.3
95
96
Magnet Weight
109 oz.
109 oz.
67 oz.
Gap Height
0.375”, 9.53mm
0.375”, 9.53mm
0.380’’, 9.53mm
Voice Coil Diameter
4”, 101.6mm
4”, 101.6mm
2.5’’, 63.5mm
33Hz
32Hz
28Hz
DC Resistance (Re)
5.28
6.19
5.3
1.04mH
4.78mH
3.43mH
Mechanical Q (Qms)
5.69
10.38
10.38
0.33
0.36
0.33
Total Q (Qts)
0.32
0.35
0.32
493.2 liters / 17.41cu.ft.
411cc
939cc
796cc
0.25mm/N
0.12mm/N
0.25mm/N
BL Product (BL)
17.5 T-M
27.0 T-M
18.9 T-M
94 grams
211 grams
128 grams
99
89
84
4.8mm
7.9mm
6.7mm
856.3 cm2
1188.0 cm2
1188.0 cm2
12.2mm
15.9mm
15.0mm
Sealed
N/A
N/A
N/A
Vented
57-108 liters/ 2-3.8 cu.ft.
125-210 liters/ 4.4-7.4 cu.ft.
85-297 liters/3.0-10.5 cu.ft.
Overall Diameter
15.21”, 386.4mm
18”, 457.2mm
18.00’’, 457.2mm
14.0”, 355.6mm
16.57”, 420.9mm
16.57’’, 420.9mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.28”, 7.1mm
0.28”, 7.1mm
0.28’’, 7.1mm
14.56”, 369.9mm
17.25”, 438.2mm
17.25’’, 438.2mm
Depth
6.35”, 161mm
8.13”, 206.4mm
8.13’’, 207mm
Net Weight
22.7 lbs., 10.3 kg
24 lbs, 10.9 kg
17.0 lbs, 7.7 kg
Shipping Weight
25.2 lbs., 11.4 kg
26 lbs, 11.8 kg
20.5 lbs, 9.3 kg
Coil Construction
Copper voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Polyimide former
Magnet Composition
Ferrite magnet
Ferrite magnet
Ferrite magnet
Core Details
Undercut with copper shorting ring
Power Rating**
and Core Periphery Ventilation
Basket Materials
Cone Composition
Paper Cone
Acrylic Wetlook Paper Cone
Paper cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Acrylic wetlook paper dust cap
10
KILOMAX® PRO 18A
SIGMA PRO 18A-2
OMEGA PRO-18A
KILOMAX® PRO 18A
OMEGA PRO-18A
SIGMA PRO 18A-2
18”, 457.2mm
18”, 457.2mm
18”, 457.2mm
8 ohms
8 or 4 ohms
8 ohms
1250W
800W
650W
2500W
1600W
1300W
32Hz
25Hz
28Hz
33Hz-300Hz
40Hz-800Hz
41Hz-2.4kHz
95.8
97
99
109 oz.
109 oz.
120 oz.
0.375”, 9.53mm
0.375”, 9.53mm
0.375”, 9.53mm
4”, 101.6mm
4”, 101.6mm
3”, 76.2mm
32Hz
25Hz
28Hz
5.07
5.20
6.29
1.59mH
1.67mH
1.90mH
10.15
8.18
8.28
.49
0.32
0.30
0.47
0.31
0.29
331.5 liters / 11.7 cu.ft.
548.7 liters / 19.4 cu.ft.
441.2 liters / 15.6 cu.ft.
1159cc
556cc
695cc
0.18mm/N
0.29mm/N
0.24mm/N
17.2 T-M
18.8 T-M
22.1 T-M
143.17 grams
138 grams
130 grams
64.9
79
93
10.0mm
4.8mm
6.1mm
1159.0 cm2
1159.0 cm2
1140.0 cm2
19.2mm
16.0mm
18.0mm
104.8-172.7 liters/3.7-6.1cu.ft.
N/A
N/A
118.9-303 liters/4.2-10.7cu.ft.
96-198 liters/ 3.4-7 cu.ft.
93-212 liters/3.3-7.5 cu.ft.
18”, 457.2mm
18”, 457.2mm
18”, 457.2mm
16.56”, 420.6mm
16.56”, 420.5mm
16.56”, 420.5mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
0.28”, 7.1mm
0.28”, 7.1mm
0.28”, 7.1mm
17.25”, 438.2mm
17.25”, 438.2mm
17.25”, 438.2mm
8.15”, 207mm
8.15”, 207mm
8.15”, 207mm
27.4 lbs., 12.4 kg
25.2 lbs., 11.4 kg
24.5 lbs., 11.1 kg
30.9 lbs., 14 kg
28.9 lbs., 13.1 kg
28.1 lbs., 12.8 kg
Copper voice coil
Copper voice coil
Copper voice coil
Kapton
Polyimide former
Polyimide former
Ferrite magnet
Ferrite magnet
Ferrite magnet
Extended core with Core Periphery
Treated Paper-Kevlar
Paper Cone
Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Porous cloth top spider/ heatsink
Ventilation
WWW.EMINENCE.COM
11
neodymium series
The basic design of the loudspeaker
hasn’t changed much in the
past 50 years. On the contrary,
many materials incorporated in
loudspeaker design have
improved dramatically.
Back in the 50s and 60s, Alnico was the most common magnet used in loudspeakers.
However, a shortage in materials and increased costs for Alnico during that time
precipitated a shift to the widespread use of the ceramic magnets most of us are
familiar with today.
Just before the turn of this century, speaker manufacturers started seriously
evaluating the potential benefits of using neodymium magnets in loudspeakers.
Although neodymium magnets were expensive, they allowed loudspeaker motors
to be as little as half the weight of comparable ceramic magnet motors. Prices of
neodymium started coming down and interest in lighter weight speakers grew, as
did neodymium
speaker options.
Today, Eminence has become the industry leader in neodymium loudspeaker design.
The Eminence LA, Deltalite and Kappalite models represent very lightweight, high
performance loudspeakers without compromises in power handling, performance
or reliability.
There are 8 unique models available in our Neodymium Professional series. Each
was designed with a specific application in mind. From heavy-duty subwoofers,
midranges, and transducers in truncated frames for line arrays, there is an Eminence
Neodymium Professional model for your application. Each product includes Made
in the USA pride, along with a Seven Year Warranty against manufacturer’s defects*.
With over 1,200 USA dealers and distributors worldwide, you can easily find them in
a store near you.
*Warranty policy may vary outside of the continental United States and Canada.
Check with your local distributor for warranty details.
alphalite 6 CBMR
la8 cnmba
deltalite ii 2510
deltalite ii 2512
kappalite 3012ho
kappalite 3012lf
Deltalite ii 2515
kappalite 3015
kappalite 3015lf
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
midrange usage
j
j
j
j
j
j
j
j
j
mid bass usage
woofer usage
j
subwoofer usage
j
horn loading
reflex box
Alphalite 6a
closed box
compatibility
j
j
j
j
j
j
13
NEODYMIUM SERIES
ALPHALITE™ 6A
LA8-CNMBA
ALPHALITE™ 6 CBMR
DELTALITE® II 2510
SPECIFICATION
ALPHALITE™ 6A
ALPHALITE™ 6 CBMR
LA8-CNMBA
6.5”, 165.1mm
6.5”, 165mm
8’’, 203mm
Nominal Impedance*
8 ohms
8 ohms
8 ohms
Watts
100W
100W
225W
Music Program
200W
200W
450W
Resonance
125.55Hz
500.52Hz
82Hz
74Hz-5.5kHz
500Hz-4.3kHz
82Hz-3.2kHz
Sensitivity***
94
99.8
95.5
Magnet Weight
3.5 oz.
4 oz.
7 oz.
Gap Height
0.25”, 6.35mm
0.25”, 6.35mm
0.28’’, 6.99mm
Voice Coil Diameter
1.5”, 38.1mm
1.5”, 38.1mm
2.5’’, 63.5mm
126Hz
501Hz
81Hz
DC Resistance (Re)
7.3
7.4
5.6
.53mH
.49mH
0.62mH
Mechanical Q (Qms)
6.30
9.09
4.66
0.61
1.83
0.40
Total Q (Qts)
0.56
1.53
0.37
10.95 liters /0.39 cu.ft.
46 cc
1.40 cc
100cc
0.21mm/N
0.01mm/N
0.16mm/N
BL Product (BL)
8.5 T-M
9.8 T-M
13.0 T-M
7.7 grams
7.6 grams
24 grams
204.9
273.2
201
3.5mm
0.1mm
4.5mm
129.9 cm2
139.7 cm2
222.4 cm2
4.0mm
1.6mm
8mm
Sealed
2.83-8 liters/.1-8 cu.ft.
N/A
7-17 liters/ 0.2-.6 cu.ft.
Vented
3-16 liters/.1-.6 cu.ft.
N/A
10-17 liters/0.4-0.6 cu.ft.
Overall Diameter
6.59”, 167.39mm
6.59”, 167.39mm
8.02’’, 203.7mm
5.69”, 144.53mm
5.69”, 144.53mm
7.36’’, 186.9mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.23”, 5.8mm
0.23”, 5.8mm
.28’’, 7.11mm
6.06”, 153.9mm
6.06”, 153.9mm
8.60’’, 218mm
Depth
2.40”, 61mm
2.40”, 61mm
3.90’’, 99.06mm
Net Weight
2.2 lbs, 1.00 kg
2.3 lbs., 1.04 kg
4.77 lbs., 2.2 kg
Shipping Weight
2.9 lbs, 1.3 kg
3.0 lbs, 1.3 kg
5.47 lbs., 2.4 kg
Coil Construction
Round Copper voice coil
Copper voice coil
Edge Wound Copper voice coil
Coil Former
Kapton
Kapton
Polyimide former
Magnet Composition
Neodymium magnet
Neodymium magnet
Neo magnet
Core Details
Vented and Extended core
Non-vented core
Vented core
Basket Materials
Pressed steel basket
Cone Composition
Paper Cone
Paper Cone
Paper cone
Cloth cone edge
Full Paper Cone
Cloth cone edge
Treated paper dust cap
Power Rating**
14
DELTALITE®-II 2512
KAPPALITE™ 3012HO
KAPPALITE™ 3012LF
DELTALITE® II 2510
DELTALITE®-II 2512
KAPPALITE™ 3012HO
KAPPALITE™ 3012LF
10”, 254mm
12”, 304.8mm
12”, 305mm
12”, 305mm
8 ohms
8 ohms
8 ohms
8 ohms
250W
250W
400W
450W
500W
500W
800W
900W
53Hz
37Hz
52Hz
37Hz
60Hz-4kHz
48Hz-4kHz
51Hz-3.5kHz
46Hz-2.0kHz
97.3
99.9
100.5
95.5
7 oz.
7 oz.
11 oz.
11 oz.
0.275”, 7mm
0.275”, 7mm
0.365”, 9.27mm
0.365”, 9.27mm
2.5”, 63.5mm
2.5”, 63.5mm
3”, 76.2mm
3”, 76.2mm
53Hz
37Hz
51.5Hz
37.02Hz
5.06
5.04
5.5
5.6
0.40mH
0.46mH
0.57mH
0.98mH
5.76
3.13
8.39
6.94
0.45
0.44
0.33
0.34
0.42
0.39
0.32
0.32
147 liters / 5.2 cu.ft.
81.10 liters / 2.86 cu.ft.
106.65 liters / 3.77 cu.ft.
147cc
255cc
330cc
496cc
0.30mm/N
0.38mm/N
0.20mm/N
0.26mm/N
10.6 T-M
11.3 T-M
15.9 T-M
16.7 T-M
31 grams
49 grams
46.9 grams
72.4 grams
117
84
157.4
109.7
4.2mm
4.9mm
6.2mm
9.1mm
350.1 cm2
519.5 cm2
532.4 cm2
545.4 cm2
8.0mm
8.5mm
12.5mm
14.5mm
12.7-17 liters/0.45-0.6cu.ft.
23-28 liters/0.8-1cu.ft.
28-76 liters/1.0-2.7 cu.ft.
23-59 liters/1.3-3.0 cu.f.t
17-39.6 liters/0.6-1.4cu.ft.
33-85 liters/1.2-3cu.ft.
41-110 liters/1.5-3.9 cu.ft.
37-85 liters/1.3-3.0 cu.ft.
10.25”,260.4mm
12.38”, 314.5mm
12.38”, 314.45mm
12.38”, 314.45mm
9.15”, 232.4mm
11.06”, 280.9mm
11.06”, 280.9mm
11.06”, 280.9mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
0.28”, 7.1mm
0.28”, 7.1mm
0.28”, 7.1mm
0.28”, 7.1mm
9.73”, 247.1mm
11.62”, 295.1mm
11.62”, 295.2mm
11.62”, 295.2mm
4.9”, 123.8mm
6.06”, 154mm
5.63”, 143mm
6.00”, 152.4mm
4.6 lbs., 2.1 kg
5.1 lbs., 2.3 kg
7.1 lbs, 3.22 kg
7.6 lbs, 3.45 kg
5.7 lbs., 2.6 kg
6.8 lbs., 3.1 kg
8.7 lbs., 3.95 kg
9.2 lbs., 4.17 kg
Aluminum voice coil
Aluminum voice coil
Aluminum voice coil
Copper Voice coil
Polyimide former
Polyimide former
Kapton
Kapton
Neodymium magnet
Neodymium magnet
Neodymium magnet
Neodymium magnet
Vented core
Vented core
Vented core
Vented core
Die-cast aluminum basket/ heatsink
Paper Cone
Paper Cone
Treated Paper Cone
Treated Paper Cone
Cloth cone edge
Cloth cone edge
Sealed Cloth Surround
Sealed Cloth Edge
WWW.EMINENCE.COM
15
NEODYMIUM SERIES
KAPPALITE™ 3015
DELTALITE®-II 2515
KAPPALITE™ 3015LF
SPECIFICATION
DELTALITE®-II 2515
KAPPALITE™ 3015
KAPPALITE™ 3015LF
15”, 381mm
15”, 381mm
15”, 381mm
Nominal Impedance*
8 ohms
8 ohms
8 ohms
Watts
300W
450W
450W
Music Program
600W
900W
900W
Resonance
42Hz
45Hz
44Hz
54Hz-3.7kHz
40Hz-4kHz
40Hz-1.5kHz
Sensitivity***
99.2
100.8
98.4
Magnet Weight
7 oz.
11 oz.
11 oz.
Gap Height
0.275”, 7mm
0.365”, 9.27mm
0.365”, 9.27mm
Voice Coil Diameter
2.5”, 63.5mm
3”, 76.2mm
3”, 76.2mm
42Hz
45Hz
44Hz
DC Resistance (Re)
5.29
5.27
5.5
1.15mH
0.64mH
0.93mH
Mechanical Q (Qms)
4.56
6.70
8.97
0.41
0.36
.48
Total Q (Qts)
0.38
0.34
.46
411cc
505cc
846cc
0.20mm/N
0.15mm/N
0.14mm/N
BL Product (BL)
15.7 T-M
18.6 T-M
17.0 T-M
72 grams
84 grams
93.4 grams
103
125
90
4.8mm
5.9mm
9.6mm
856.3 cm2
856.0 cm2
881.1 cm2
9.0mm
11mm
17.0mm
Sealed
42.5-48 liters/1.5-1.7cu.ft.
N/A
N/A
Vented
51-119 liters/1.8-4.2cu.ft.
51-144 liters/1.8-5.1cu.ft.
99-195 liters/3.5-6.9 cu.ft.
Overall Diameter
15.32”, 389mm
15.32”, 389.1mm
15.32”, 389.1mm
14.0”, 355.6mm
14.0”, 356.4mm
14.03”, 356.4mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.28”, 7.1mm
0.28”, 7.1mm
0.28”, 7.1mm
14.56”, 369.9mm
14.56”, 369.8mm
14.56”, 369.8mm
Depth
6.81”, 173mm
6.8”, 173mm
7.25”, 184.2mm
Net Weight
5.7 lbs., 2.6 kg
7.9 lbs., 3.6 kg
8.6 lbs., 3.9 kg
Shipping Weight
7.9 lbs., 3.6 kg
10.1lbs., 4.6 kg
10.7 lbs., 4.9 kg
Coil Construction
Aluminum voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Kapton
Magnet Composition
Neodymium magnet
Neodymium magnet
Neodymium magnet
Core Details
Vented core
Vented core
Vented core
Basket Materials
Die-cast aluminum basket/heatsink
Cone Composition
Paper Cone
Paper Cone
Treated Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Power Rating**
16
®
sales • service • diagnostics • installation
THE
• With over 75 years of combined experience, our in-house
technical staff is available for application specific consulting
• Factory Authorized Genuine Eminence Warranty and Service
• Our 7500 sq. ft. warehouse is centrally located in North America
for fast and economical delivery
• Same Day Shipping and Express Shipping Services available
LoudspeakersPlus®
450 S. Spruce St. • Unit G • Manteno, IL 60950
1.866.963.0733
www.loudspeakersplus.com • www.speakerreconingservice.com • www.thetonechamber.com
C
HA
MBE
R
As a Charter Genuine Eminence
Distributor our huge inventory
is ready to ship today
TONE
®
Our new exclusive Tone
Chamber is the only place
where you can try EVERY
Eminence guitar speaker–
with YOUR guitar and
YOUR amp.
By using our custom designed
switching system, you can
instantly compare all
27 Eminence guitar speakers.
You can even demo two
different speakers at
once for a “blended” tone.
Pick Your Tone!
Call Today to reserve your
time in the Tone Chamber!
Conveniently located just south of
Chicago on I-57.
AMERICAN STANDARD
The Eminence mission
statement is “Quality, Value,
and Service to Meet Our
Customer’s Needs.”
There are 24 unique models available in our American Standard series. Each
Nowhere is that creed more evident than in the quality, value, and reliability
a lot of Made in the USA pride, along with a Seven Year Warranty against
inherent in the design and manufacturing of our American Standard
manufacturer’s defects*. With over 1,200 USA dealers and distributors
series products.
worldwide you can easily find them in a store near you.
Each Eminence American Standard model can be identified by its economical
*Warranty policy may vary outside of the continental United States and
Stamped Steel chassis. Although more affordable than cast aluminum, these
Canada. Check with your local distributor for warranty details.
frames provide an excellent and versatile chassis. We coat each basket and
all metal components with an epoxy-acrylic finish using our in-house e-coat
process. We can control the thickness of that coating to within 0.001”; critical
when working with close tolerance transducer motor designs. We then add
front and rear sealing gaskets on each model to accommodate front or
rear loading.
18
was designed for versatility in a range of applications. From 6.5-15” models
with applications ranging from standard sub-woofers, two-way enclosures,
and coaxials, to truncated line array models, monitor woofers, and high
performance midranges setting records for output in car audio, no other
loudspeaker line provides more choices, power handling, performance, and
reliability for the price. As with our Professional series, each product includes
beta 8a
beta 8cx
alpha 10a
beta 10a
beta 10cx
delta 10a
delta 10b
alpha 12a
beta 12a
beta 12cx
beta 12lta
delta 12a
delta 12b
delta 12lfa
DELTA 12LFC
kappa 12a
alpha 15a
beta 15a
delta 15a
delta 15b
delta 15lfa
gamma 15a
kappa 15a
kappa 15c
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
kappa 15lfa
midrange usage
mid bass usage
alpha 8mra
woofer usage
alpha 8a
subwoofer usage
la6 cbmr horn loading
alpha 6c
reflex box
alpha 6a
closed box
compatibility
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
j
19
AMERICAN STANDARD SERIES
ALPHA-6A
LA6-CBMR
ALPHA-8A
SPECIFICATION
ALPHA-6A
LA6-CBMR
ALPHA-8A
6.5”, 165mm
6.5”, 165mm
8”, 203.2mm
Nominal Impedance*
8 or 4 ohms
8 ohms
8 ohms
Watts
100W
150W
125W
Music Program
200W
300W
250W
Resonance
118Hz
460Hz
73Hz
85Hz-6kHz
500Hz-5.4kHz
58Hz-5kHz
Sensitivity***
93.6
97.8
94
Magnet Weight
20 oz.
38 oz.
20 oz.
Gap Height
0.25”, 6.35mm
0.31”, 7.92mm
0.25”, 6.35mm
Voice Coil Diameter
1.5”, 38.1mm
1.5”, 38.1mm
1.5”, 38.1mm
118Hz
460Hz
73Hz
DC Resistance (Re)
7.2
6.3
5.3
0.19mH
0.33mH
0.44mH
Mechanical Q (Qms)
5.68
3.13
4.6
0.60
1.24
0.68
Total Q (Qts)
0.54
0.89
0.59
44cc
2.7cc
67cc
0.26mm/N
0.01mm/N
0.28mm/N
BL Product (BL)
8.0 T-M
11.1 T-M
7.8 T-M
7 grams
9 grams
17 grams
197
371
107
3.5mm
0.2mm
3.2mm
126.7 cm2
133.1 cm2
210.0 cm2
4.0mm
0.8mm
7.1mm
Sealed
2.8-5.7 liters/0.1-0.2 cu.ft.
Acceptable
5-7 liters/0.18-0.25 cu.ft.
Vented
3.4-15.6 liters/0.12-0.55 cu.ft.
Acceptable
16.7-25.5 liters/0.59-0.90 cu.ft.
Overall Diameter
6.59”, 167.4mm
6.59”, 167mm/Width across flats: 6”, 152mm
8.24”, 209.2mm
5.69”, 144.5mm
5.65”, 143.5mm
7.13”, 181mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
N/A
Fitted as standard
0.23”, 5.7mm
0.23”, 5.7mm
0.22”, 5.5mm
6.06”, 154mm
6.06”, 154mm
7.75”, 196.9mm
Depth
2.8”, 71mm
2.77”, 70mm
3.25”, 83mm
Net Weight
4.1 lbs., 1.9 kg
6.7 lbs., 3 kg
4.3 lbs., 1.9 kg
Shipping Weight
4.8 lbs., 2.2 kg
7.2 lbs., 3.3 kg
5.1 lbs., 2.3 kg
Coil Construction
Copper voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Polyimide former
Magnet Composition
Ferrite magnet
Ferrite magnet
Ferrite magnet
Core Details
Vented core
Basket Materials
Pressed steel basket with truncated sides
Cone Composition
Paper Cone
Paper Cone
Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Power Rating**
20
BETA-8A
ALPHA-8MRA
ALPHA-10A
BETA-8CX
ALPHA-8MRA
BETA-8A
BETA-8CX
ALPHA-10A
8”, 203.2mm
8”, 203.2mm
8”, 203.2mm
10”, 254mm
8 ohms
8 ohms
8 ohms
8 ohms
125W
225W
250W
150W
250W
450W
500W
300W
514Hz
65Hz
63Hz
50Hz
400Hz-4.8kHz
78Hz-4.5kHz
74Hz-20kHz
57Hz-4.5kHz
100.9
95.1
93.3
95.6
20 oz.
34 oz.
38 oz.
20 oz.
0.25”, 6.35mm
0.312”, 7.92mm
0.313”, 7.94mm
0.25”, 6.35mm
1.5”, 38.1mm
2”, 50.8mm
2”, 50.8mm
1.5”, 38.1mm
514Hz
65Hz
63Hz
50Hz
7.32
5.99
5.6
5.31
0.34mH
0.49mH
0.85mH
0.66mH
4.48
4.95
8.82
5.21
2.08
0.42
0.34
0.66
1.42
0.38
0.33
0.59
0cc
63cc
67.20cc
114cc
0.01mm/N
0.37mm/N
0.32mm/N
0.46mm/N
8.9 T-M
9.6 T-M
11.1 T-M
7.5 T-M
6.9 grams
16 grams
18.3 grams
22 grams
247
156
193.1
76
1.6mm
3.0mm
3.2mm
3.2mm
205.9 cm2
210.0 cm2
210.0 cm2
355.4 cm2
3.0mm
7.4mm
6.9mm
9.1mm
N/A
5.7-9.9 liters/0.2-0.35 cu.ft.
3-10 liters/ 0.1-0.4 cu.ft.
8.5-11.3 liters/0.3-0.4 cu.ft.
N/A
8.5-19 liters/0.3-0.67 cu.ft.
8-21 liters/0.3-0.8 cu.ft.
28.3-53.8 liters/1.0-1.9 cu.ft.
8.22”, 208.8mm
8.24”, 209.2mm
8.24”, 209.3mm
10.11”, 256.8mm
7.19”, 182.5mm
7.13”, 181mm
7.13”, 181.1mm
9.13”, 231.8mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
0.22”, 5.5mm
0.22”, 5.5mm
0.22”, 5.6mm
0.23”, 5.7mm
7.75”, 196.9mm
7.75”, 196.9mm
7.75”, 196.9mm
9.6”, 243.8mm
3.25”, 83mm
3.5”, 89mm
3.5”, 88.9mm
3.90”, 99mm
4.4 lbs., 2 kg
6.6 lbs., 3 kg
6.8 lbs., 3.1 kg
4.5 lbs., 2 kg
5.1 lbs., 2.3 kg
7.4 lbs., 3.4 kg
7.5 lbs., 3.4 kg
5.6 lbs., 2.5 kg
Copper voice coil
Aluminum voice coil
Copper voice coil
Copper voice coil
Polyimide former
Polyimide former
Kapton former
Polyimide former
Ferrite magnet
Ferrite magnet
Ferrite magnet
Ferrite magnet
Vented core
Vented core
Tapered Coax
Pressed steel basket with closed back
Paper Cone
Paper Cone
Treated Paper Cone
Paper Cone
Paper cone edge
Cloth cone edge
Sealed Cloth cone edge
Cloth cone edge
Zurette dust cap
WWW.EMINENCE.COM
21
BETA-10A
BETA-10CX
DELTA-10A
SPECIFICATION
BETA-10A
BETA-10CX
DELTA-10A
10”, 254mm
10”, 254mm
10”, 254mm
Nominal Impedance*
8 ohms
8 ohms
8 or 16 ohms
Watts
250W
250W
350W
Music Program
500W
500W
700W
Resonance
53Hz
48Hz
66Hz
51Hz-3.8kHz
58Hz-20kHz*
63Hz-3.7kHz
Sensitivity***
97
95.1
98.8
Magnet Weight
34 oz.
38 oz.
56 oz.
Gap Height
0.312”, 7.92mm
0.312”, 7.92mm
0.375”, 9.53mm
Voice Coil Diameter
2”, 50.8mm
2”, 50.8mm
2.5”, 63.5mm
53Hz
48Hz
66Hz
DC Resistance (Re)
5.75
5.53
5.42
0.67mH
0.75mH
0.74mH
Mechanical Q (Qms)
8.14
5.21
6.53
0.52
0.43
0.35
Total Q (Qts)
0.49
0.39
0.33
102cc
173cc
121cc
0.36mm/N
0.39mm/N
0.18mm/N
BL Product (BL)
9.6 T-M
10.4 T-M
14.4 T-M
25 grams
27 grams
32 grams
103
114
189
3.0mm
5.0mm
3.5mm
344.9 cm2
344.9 cm2
344.9 cm2
8.6mm
7.6mm
9.4mm
Sealed
8.5-14.2 liters/0.3-0.5 cu.ft.
14.2-19.8 liters/0.5-0.7 cu.ft.
N/A
Vented
19.8-70.8 liters/0.7-2.5 cu.ft.
15.6-85 liters/0.55-3 cu.ft.
12.7-37.9 liters/0.45-1.34 cu.ft.
Overall Diameter
10.11”, 256.8mm
10.08”, 256.1mm
10.09”, 256.2mm
9.13”, 231.8mm
9.05”, 229.7mm
9.05”, 229.7mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.23”, 5.7mm
0.25”, 6.4mm
0.25”, 6.4mm
9.6”, 243.8mm
9.66”, 245.4mm
9.66”, 245.4mm
Depth
3.98”, 101mm
3.98”, 101mm
4.25”, 108mm
Net Weight
6.8 lbs., 3.1 kg
7.3 lbs., 3.3 kg
10.8 lbs., 4.9 kg
Shipping Weight
7.8 lbs., 3.6 kg
8.4 lbs., 3.8 kg
12 lbs., 5.4 kg
Coil Construction
Aluminum voice coil
Copper voice coil
Aluminum voice coil
Coil Former
Polyimide former
Polyimide former
Polyimide former
Magnet Composition
Ferrite magnet
Ferrite magnet
Ferrite magnet
Core Details
Vented core
Vented core
Basket Materials
Cone Composition
Paper Cone
Paper Cone
Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Screened cloth dust cap
Power Rating**
22
ALPHA-12A
BETA-12A-2
BETA-12CX
BETA-12LTA
ALPHA-12A
BETA-12A-2
BETA-12CX
BETA-12LTA
12”, 304.8mm
12”, 304.8mm
12”, 304.8mm
12”, 304.8mm
8 ohms
8 ohms
8 ohms
8 ohms
150W
250W
250W
225W
300W
500W
500W
450W
49Hz
47Hz
47Hz
45Hz
51Hz-4.3kHz
43Hz-3.8kHz
66Hz-20kHz*
48Hz-8kHz
95.6
98
96.4
97.7
20 oz.
38 oz.
38 oz.
38 oz.
0.25”, 6.35mm
0.312”, 7.92mm
0.312”, 7.92mm
0.312”, 7.92mm
1.5”, 38.1mm
2”, 50.8mm
2”, 50.8mm
2”, 50.8mm
49Hz
47Hz
47Hz
45Hz
6.3
5.0
5.57
7.37
0.79mH
0.64mH
1.01mH
0.83mH
6.53
6.00
6.69
6.44
0.88
0.50
0.51
0.55
0.77
0.46
0.48
0.51
125cc
237cc
186cc
170cc
0.32mm/N
0.29mm/N
0.40mm/N
0.34mm/N
8.5 T-M
10.8 T-M
10.0 T-M
11.7 T-M
33 grams
40 grams
34 grams
36 grams
56
94
84
82
2.4mm
4.4mm
3.5mm
3.2mm
519.5 cm2
538.9 cm2
532.4 cm2
532.4 cm2
6.6mm
11mm
10.4mm
8.0mm
17-22.7 liters/0.6-0.8 cu.ft.
25.5-35.4 liters, 0.9-1.25 cu.ft.
42.5-28 liters/1-1.5 cu.ft.
14-51 liters/0.5-1.8 cu.ft.
56.6-113.3 liters/2-4 cu.ft.
36.8-139 liters/1.3-4.9 cu.ft.
37-71 liters/1.3-2.5 cu.ft.
56.6-116 liters/2-4.1 cu.ft.
122 cu.in / 2 liters
12.26”, 311.4mm
12.03”, 305.5mm
12.03”, 305.5mm
12.03”, 305.5mm
11”, 279.5mm
10.95”, 278.1mm
10.95”, 278.1mm
10.95”, 278.1mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
0.25”, 6.4mm
0.25”, 6.4mm
0.25”, 6.4mm
0.25”, 6.4mm
11.71”, 297.5mm
11.59”, 294.3mm
11.59”, 294.3mm
11.59”, 294.3mm
4.73”, 120mm
4.57”, 116mm
4.47”, 114mm
4.47”, 114mm
5.3 lbs., 2.4 kg
7.5 lbs., 3.4 kg
7.8 lbs., 3.5 kg
8.1 lbs., 3.7 kg
7.4 lbs., 3.4 kg
9.7 lbs., 4.4 kg
10 lbs., 4.5 kg
10.2 lbs., 4.6 kg
Copper voice coil
Copper voice coil
Copper voice coil
Copper voice coil
Polyimide former
Polyimide former
Polyimide former
Polyimide former
Ferrite magnet
Ferrite magnet
Ferrite magnet
Ferrite magnet
Extended core
Vented core
Paper Cone
Paper Cone
Paper Cone
Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Cloth cone edge
Solid composition felt dust cap
Screened cloth dust cap
WWW.EMINENCE.COM
23
DELTA-12A
DELTA-12LFA
DELTA-12LFC
SPECIFICATION
DELTA-12A
DELTA-12LFA
DELTA-12LFC
12”, 304.8mm
12”, 304.8mm
12”, 304.8mm
Nominal Impedance*
8 or 16 ohms
8 ohms
4 ohms
Watts
400W
500W
500W
Music Program
800W
1000W
1000W
Resonance
55Hz
51Hz
52Hz
54Hz-5kHz
44Hz-3kHz
45Hz-2.3kHz
Sensitivity***
98.3
94.6
93.1
Magnet Weight
56 oz.
56 oz.
56 oz.
Gap Height
0.375”, 9.53mm
0.375”, 9.53mm
0.375”, 9.53mm
Voice Coil Diameter
2.5”, 63.5mm
2.5”, 63.5mm
2.5”, 63.5mm
55Hz
51Hz
52Hz
DC Resistance (Re)
6.3
6.06
3.2
0.74mH
1.45mH
.94mH
Mechanical Q (Qms)
5.27
7.28
8.21
0.46
0.51
.47
Total Q (Qts)
0.43
0.47
.44
125cc
243cc
249cc
0.21mm/N
0.19mm/N
0.17mm/N
BL Product (BL)
13.5 T-M
14.1 T-M
10.9 T-M
39 grams
51 grams
53 grams
120
100
111.4
2.4mm
4.8mm
4.8mm
519.5 cm2
506.7 cm2
519.5 cm2
9.9mm
13.5mm
13.5mm
Sealed
N/A
19.8-28 liters/0.7-1.0 cu.ft.
21-74 liters/0.7-2.6 cu.ft.
Vented
25.5-85 liters/0.9-3 cu.ft.
25.5-102 liters/0.9-3.6 cu.ft.
28-110 liters/1.0-3.9 cu.ft.
Overall Diameter
12.03”, 305.5mm
12.03”, 305.5mm
12.03”, 305.5mm
10.95”, 278.1mm
10.95”, 278.1mm
10.95”, 278.1mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.25”, 6.4mm
0.25”, 6.4mm
0.25”, 6.4mm
11.59”, 294.3mm
11.59”, 294.3mm
11.59”, 294.4mm
Depth
5.35”, 136mm
5.35”, 136mm
5.88”, 149.35mm
Net Weight
11.4 lbs., 5.2 kg
11.8 lbs., 5.4 kg
11.8 lbs., 5.4 kg
Shipping Weight
13.5 lbs., 6.1 kg
14 lbs., 6.4 kg
14 lbs., 6.4 kg
Coil Construction
Aluminum voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Kapton
Magnet Composition
Ferrite magnet
Ferrite magnet
Ferrite magnet
Core Details
Vented core
Basket Materials
Cone Composition
Paper Cone
Paper Cone
Treated Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Power Rating**
24
KAPPA-12A
ALPHA-15A
BETA-15A
DELTA-15A
KAPPA-12A
ALPHA-15A
BETA-15A
DELTA-15A
12”, 304.8mm
15”, 381mm
15”, 381mm
15”, 381mm
8 ohms
8 ohms
8 ohms
8 or 16 ohms
450W
200W
300W
400W
900W
400W
600W
800W
45Hz
41Hz
35Hz
40Hz
62Hz-4.2kHz
46Hz-3.5kHz
45Hz-3.7kHz
48Hz-4kHz
99.3
97
98.2
100
80 oz.
25 oz.
34 oz.
56 oz.
0.375”, 9.53mm
0.25”, 6.35mm
0.312”, 7.92mm
0.375”, 9.53mm
3”, 76.2mm
1.5”, 38.1mm
2”, 50.8mm
2.5”, 63.5mm
45Hz
41Hz
35Hz
40Hz
5.41
5.88
6.32
6.3
0.77mH
0.84mH
1.10mH
0.64mH
7.76
7.23
8.10
8.05
0.28
1.53
0.63
0.57
0.27
1.26
0.58
0.53
334.6 liters / 11.8 cu.ft.
270.7 liters / 9.56 cu.ft
166cc
325cc
330cc
233cc
0.30mm/N
0.25mm/N
0.35mm/N
0.26mm/N
15.2 T-M
7.7 T-M
11.5 T-M
13.2 T-M
42 grams
59 grams
60 grams
62 grams
161
27
56
70
3.2mm
3.8mm
4.0mm
2.7mm
519.5 cm2
856.3 cm2
823.7 cm2
864.6 cm2
11.5mm
8.4mm
11.6mm
11.1mm
N/A
71-85 liters/2.5-3 cu.ft.
45-62 liters/1.6-2.2 cu.ft.
37-42.5 liters/1.3-1.5 cu.ft.
34-62 liters/1.2-2.2 cu.ft.
106-177 liters/3.75-6.25 cu.ft.
99-175.6 liters/3.5-6.2 cu.ft.
82-161.4 liters/2.9-5.7cu.ft.
12.26”, 311.4mm
15.15”, 384.8mm
15.15”, 384.8mm
15.15”, 384.8mm
11.0”, 279.5mm
13.77”, 349.6mm
13.77”, 349.6mm
13.77”, 349.6mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
0.25”, 6.4mm
0.25”, 6.4mm
0.25”, 6.4mm
0.25”, 6.4mm
11.71”, 297.5mm
14.56”, 369.9mm
14.56”, 369.9mm
14.56”, 369.9mm
5.63”, 143mm
5.83”, 148mm
6.05”, 154mm
6.05”, 154mm
14.9 lbs., 6.8 kg
6.7 lbs., 3 kg
8.8 lbs., 4 kg
12.3 lbs., 5.6 kg
17.9 lbs., 8.2 kg
8.8 lbs., 4 kg
10.8 lbs., 4.9 kg
14.4 lbs., 6.5 kg
Aluminum voice coil
Copper voice coil
Copper voice coil
Aluminum voice coil
Polyimide former
Polyimide former
Polyimide former
Polyimide former
Ferrite magnet
Ferrite magnet
Ferrite magnet
Ferrite magnet
Vented core
Vented core
Paper Cone
Paper Cone
Paper Cone
Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Cloth cone edge
WWW.EMINENCE.COM
25
DELTA-15LFA
GAMMA 15A-2
KAPPA-15A
SPECIFICATION
DELTA-15LFA
GAMMA 15A-2
KAPPA-15A
15”, 381mm
15”, 381mm
15”, 381mm
Nominal Impedance*
8 ohms
8 ohms
8 or 4 ohms
Watts
500W
300W
450W
Music Program
1000W
600W
900W
Resonance
39Hz
33Hz
33Hz
42Hz-3.2kHz
48Hz-3.3kHz
52Hz-2.3kHz
Sensitivity***
96
98.6
100.5
Magnet Weight
56 oz.
59 oz.
80 oz.
Gap Height
0.375”, 9.53mm
0.312”, 7.92mm
0.375”, 9.53mm
Voice Coil Diameter
2.5”, 63.5mm
2”, 50.8mm
3”, 76.2mm
39Hz
33Hz
33Hz
DC Resistance (Re)
6.11
5.98
5.22
1.37mH
1.73mH
1.05mH
Mechanical Q (Qms)
6.3
5.13
8.90
0.52
0.32
0.33
Total Q (Qts)
0.48
0.30
0.32
241.0 liters / 8.51 cu.ft.
314.1 liters / 11.1 cu.ft.
321.3 liters / 11.35 cu.ft.
419cc
257cc
343cc
0.23mm/N
0.31mm/N
0.31mm/N
BL Product (BL)
14.6 T-M
17.2 T-M
15.7 T-M
75 grams
78 grams
76 grams
75
103
98
4.8mm
3.0mm
4.0mm
873.0 cm2
856.3 cm2
856.3 cm2
16.5mm
11.8mm
11.6mm
Sealed
36.8-42.5 liters/1.3-1.5 cu.ft.
N/A
N/A
Vented
85-167 liters/3-5.9 cu.ft.
40-136 liters/1.4-4.8 cu.ft.
45-113 liters/1.6-4 cu.ft.
Overall Diameter
15.15”, 384.8mm
15.15”, 384.8mm
15.16”, 384.9mm
13.77”, 349.6mm
13.77”, 349.6mm
13.77”, 349.6mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.25”, 6.4mm
0.25”, 6.4mm
0.25”, 6.4mm
14.56”, 369.9mm
14.56”, 369.9mm
14.56”, 369.9mm
Depth
6.3”, 160mm
5.94”, 151mm
6.13”, 156mm
Net Weight
12.8 lbs., 5.8 kg
11.8 lbs., 5.4 kg
17.6 lbs., 8 kg
Shipping Weight
14.8 lbs., 6.7 kg
14.1 lbs., 6.4 kg
19.8 lbs., 9 kg
Coil Construction
Copper voice coil
Aluminum voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Polyimide former
Magnet Composition
Ferrite magnet
Ferrite magnet
Ferrite magnet
Core Details
Vented core
Vented core
Basket Materials
Cone Composition
Paper Cone
Paper Cone
Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Power Rating**
26
HF PRODUCTS
& COMPONENTS
KAPPA-15LFA
No loudspeaker system or musical performance
is complete without high quality, durable
HF devices, well-designed horns, and highperformance crossovers.
KAPPA-15LFA
Developed for totally Eminence loaded cabinets, or as upgrades to an existing device, Eminence HF drivers achieve
15”, 381mm
extraordinary levels of audio performance with the same unrivaled durability you demand from Eminence bass and
8 ohms
midrange transducers. From our field-proven series of APT tweeters, through our 1” throat neodymium and ceramic
600W
based 1” throat compression drivers, to our workhorse 2” throat PSD 3006, you’ll find an HF device to meet your
1200W
specific power handling, frequency range, weight constraints, price and performance needs.
39Hz
38Hz-2.7kHz
99
The Eminence assortment of horns has been engineered to provide the perfect compliment to Eminence HF drivers.
95 oz.
Each horn is manufactured from the highest quality materials to obtain a balance of strength, durability, and weight
0.375”, 9.53mm
3”, 76.2mm
savings. We’ve recently added the H290S, providing our first option in a 1” throat screw-on horn. We’ve also added
the BH410, a very novel 1” throat screw-on horn designed specifically for close speaker placement and excellent HF
39Hz
5.4
dispersion in bass guitar enclosures.
1.27mH
6.08
Eminence Professional Series crossovers are technically superior passive filters available in board-only or cabinet ready
0.41
configurations. Our high-pass protection circuits center around custom manufactured aerospace lamps, working as
0.38
positive temperature coefficient series varistors to protect your HF device without introducing distortion. From low-
471cc
pass and high-pass filters, to two-way and three-way units with multiple
0.15mm/N
crossover point options, and L-PADs for more custom HF level control, there
18.6 T-M
105 grams
is an Eminence crossover solution to meet your needs.
95
5.5mm
856.3 cm2
10.4mm
Please also take a look at the adjustable Top Hat-CH pole mount cabinet
hardware. With the Top Hat, it’s never been easier to adjust the angle of your
pole mount enclosures.
N/A
62-193 liters/2.2-6.8 cu.ft.
We’re also proud to offer the Eminence B2S adaptor. The B2S allows you
to adapt your two or three bolt pattern 1” throat driver to accommodate
15.16”, 384.9mm
a 1 3/8” 18 NEF thread horn.
13.77”, 349.6mm
Fitted as standard
Fitted as standard
0.25”, 6.4mm
14.56”, 369.9mm
6.38”, 162mm
20 lbs., 9.1 kg
22.3 lbs., 10.1 kg
Copper voice coil
Polyimide former
Ferrite magnet
Vented core
Paper Cone
Cloth cone edge
BUYEMINENCE.COM
Your B2B Loudspeaker Super Store!
drivers
SPECIFICATION
ASD:1001
APT:50
Throat Size
1", 25.4mm
1", 25.4mm
Nominal Impedance*
8 ohms
8 ohms
Power Rating**
50W @ 2.5kHz
45W @ 3.5kHz, 85Wrms @5kHz
Resonance
1.23kHz
1.6kHz
2.5kHz-20kHz
3.5Hz-20kHz
Recommended Crossover
2.5kHz/18dB
3.5kHz
Sensitivity***
104.3dB
104dB
Magnet Weight
12 oz, .34 kg
7.75 oz, .22 kg
Voice Coil Diameter
1.3", 33mm
1.0"/25.4mm
Diaphragm Material
Diamond Titanium
Phenolic
Re
6.7
6.3
Overall Diameter
3.5", 88.9mm
2.75", 70mm
Depth
2.45", 62mm
2.5", 63.5mm
Weight
2 lbs / 0.9 kg
1.63 lbs /0.74 kg
Mounting Thread
1 3/8" 18 NEF ext.
1 3/8” 18 NEF ext. for mounting on
coaxial speakers or screw-on horns.
SPECIFICATION
NSD:2005
PSD:2002
PSD:3006
Throat Size
1", 25.4mm
1", 25.4mm
2", 50.8mm
Nominal Impedance*
8 or 16 ohms
Power Rating**
50W
Resonance
578Hz
1.5kHz-20kHz
Recommended Crossover
1.5kHz/12dB
Sensitivity***
108.4dB
Magnet Weight
4.16 oz
34 oz
80 oz
Voice Coil Diameter
2", 51mm
2", 51mm
3", 76.2mm
voice coil former
Polyimide
Polyimide
Polyimide
Diaphragm Material
Titanium
Titanium
Titanium W/Geodesic Design For Increased Strength and Stiffness
Re
6.8
6.1
4.8 ohms
Overall Diameter
3.87", 98.3mm
5.25", 133mm
7.9", 200.7mm
Depth
1.75", 44mm
2.2", 56mm
3.1", 78.7mm
Weight
2 lbs / 0.9 kg
5 lbs, Gross 5.76 lbs
13.5 lbs / 6.12 kg
2X 1/4-20
2X 1/4-20 or 3x M6
#4 (1/4-20)
3"
3" or 2.25"
4", 101.6mm
Mounting Thread
1 3/8" 18 NEF ext.
1 3/8" 18 NEF ext.
N/A
8 or 16 ohms
Multiple units exceeding published
rating evaluated under AES noise
source and tested standard
while mounted on the H290 horn
in a non-temperature controlled
environment.
80W
8 ohms
***** 80W or 115W
540Hz
470Hz
1.2kHz-20kHz
500Hz-20kHz
1.2kHz/18dB or 1.8kHz/12dB
106.1dB
80W (AES500 specification w/xover ≥ 500Hz, except 24dB/octave)
115W (AES800 specification w/xover ≥ 800Hz @ 12dB/octave)
See Power Rating
****** 109dB
@ 1W/1m across 500Hz-18kHz on axis on Community SH494 horn
The NSD:2005 and PSD:2002 drivers are available in either screw-on or bolt-on formats. Please specify your preferences when ordering. The PSD:3006 is bolt-on only.
28
SUPERTWEETER
options
APT:80
APT:150
APT:200
Dispersion
80° Conical
100 x 50
90 x 90
Dimensions
3.4"x3.4", 87mm x 87mm
7.5"x4.5", 191mm x 114mm
5.9"x5.9", 150mm x 150mm
Cut-out
3.15", 80mm
6.7" x 3.4", 170mm x 86mm
4.25"x4.5", 108mm x 114
Depth
2.9", 73.6mm
4.5", 114.3mm
5.1", 129.5mm
Weight
1.6 lbs, 727 grams
2 lbs, 909 grams
2.5 lbs, 1136 grams
APT:3 ADAPTOR
B2S ADAPTOR
TOP HAT-CH
Apt:3 Adaptor converts the APT:50
Converts bolt-on driver to
Adjustable-angle speaker stand
to 1 3/8" 18 NEF ext. for mounting on
accept a screw-on horn.
receptacle for loudspeaker boxes.
coaxial speakers or screw-on horns.
2x 1/4-20 or 3x M6 driver
Vertical angle can be adjusted in
to 1 3/8” 18NEF ext. horn.
4º increments to +/- 18º. Fits SPS56B
and most other standard speaker
stands. Internal Ø 36mm. Black
Polyamide. Patent pending.
HORN FLARES
SPECIFICATION
H290
H290S
H295
H395
Type
Radial
Radial
Constant Directivity
Throat Size
1", 25mm
1", 25mm
1", 25mm
1", 25mm
Dispersion
90 x 40
90 x 40
90 x 40
90 x 40
Lowest Rec. Crossover
1kHz
1kHz
1kHz
1kHz
Width/Height/Depth
11.4" x 6.5" x 5.9"
11.7" x 6.6" x 6.6"
12.1" x 6" x 4"
15.6" x 7.3" x 6.1"
Width/Height/Depth (mm)
290 x 165 x 150mm
297 x 168 x 168mm
307 x 152 x 102mm
396 x 185 x 155mm
Cut-out
10.3" x 4.9", 260 x 126mm
9.7" x 4.9", 246 x 124mm
10.5" x 4.3", 267 x 109mm
13.9" x 5.9", 355 x 150mm
Weight
1.8 lbs, 818 grams
1.1 lbs, 500 grams
1.3 lbs, 591 grams
1.8 lbs, 818 grams
SPECIFICATION
SST1
LT250
TI2000
BH410
Type
Constant Directivity, Radial
Exponential
Throat Size
1", 25mm
1", 25mm
2", 51mm
1", 25mm
Dispersion
90 x 40
60 x 40
60 x 40
60 x 60
Lowest Rec. Crossover
1kHz
1kHz
500Hz
1kHz
Width/Height/Depth
9.8" x 7.7" x 5.2"
6.7" x 6.4" x 4.2"
11.2" x 9.7" x 10.1"
5.59" x 5.59" x 4.38"
Width/Height/Depth (mm)
249 x 196 x 132mm
170 x 163 x 107mm
284 x 246 x 257mm
141.9 x 141.9 x 111.2mm
Cut-out
8.5" x 6.4", 216 x 163mm
5.4" x 5.2", 137 x 132mm
9.5" x 8.5", 241 x 216mm
3.56" x 3.56", 90.4 x 90.4mm
Weight
1.7 lbs, 773 grams
0.8 lbs, 364 grams
3.7 lbs, 1.7 kg
.35 lbs, 159 grams
WWW.EMINENCE.COM
29
The Tone is in the Details.
high-quality materials.
crafted to perform and endure.
www.eminence.com
MADE IN THE USA
crossovers
SPECIFICATION
PX:250
PXB:250
PXB:500
PXB:1k6
PXB:3k5
PXB:5k0
Type
Low-Pass
Low-Pass
Low-Pass
High-Pass
High-Pass
High-Pass
Cabinet Ready*
Yes
No
No
No
No
No
Crossover Frequency
250Hz
250Hz
500Hz
1.6kHz
3.5kHz
5kHz
Slope
12dB/octave
12dB/octave
12dB/octave
18dB/octave
18dB/octave
18dB/octave
Butterworth
Butterworth
Butterworth
Butterworth
Butterworth
Butterworth
Impedance
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
Power Handling
600W
600W
600W
400W
400W
400W
HF Level
Mounting Cut-out
3.875" x 6"
Mounting Cut-out (mm)
98.4 x 152.4mm
SPECIFICATION
PX2:1k6
PX2:3k5
PX2:5k0
PXB2:500
PXB2:800
PXB2:1k6
Type
2-way
2-way
2-way
2-way
2-way
2-way
Cabinet Ready*
Yes
Yes
Yes
No
No
No
Crossover Frequency
1.6kHz
3.5kHz
5kHz
500Hz
800Hz
1.6kHz
Slope
12dB/octave LP
12dB/octave LP
12dB/octave LP
12dB/octave LP
12dB/octave LP
12dB/octave LP
18dB/octave HP
18dB/octave HP
18dB/octave HP
18dB/octave HP
18dB/octave HP
18dB/octave HP
Butterworth
Butterworth
Butterworth
Butterworth
Butterworth
Butterworth
Impedance
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
Power Handling
400W
400W
400W
400W
400W
400W
HF Level
9dB
9dB
9dB
Mounting Cut-out
3.875" x 6"
3.875" x 6"
3.875" x 6"
Mounting Cut-out (mm)
98.4 x 152.4mm
98.4 x 152.4mm
98.4 x 152.4mm
SPECIFICATION
PXB2:2k5 CX
PXB2:3k5
PXB2:5k0
PXB3:1k6
PXB3:3k5
PXB3:5k0
Type
2-way
2-way
2-way
3-way
3-way
3-way
Cabinet Ready*
No
No
No
No
No
No
Crossover Frequency
2.5kHz
3.5kHz
5kHz
500Hz/1.6kHz
500Hz/3.5kHz
500Hz/5kHz
Slope
12dB/octave LP
12dB/octave LP
12dB/octave LP
12dB/octave LP
12dB/octave LP
12dB/octave LP
12dB/octave HP
18dB/octave HP
18dB/octave HP
6dB/octave MP
6dB/octave MP
6dB/octave MP
Custom
Butterworth
Butterworth
18dB/octave HP
18dB/octave HP
18dB/octave HP
Butterworth
Butterworth
Butterworth
Impedance
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
Power Handling
250W
400W
400W
400W
400W
400W
PX-LPAD
Type: L-Pad
Cabinet Ready: Yes
Impedance: 8 ohms
Power Handling: 100W
*Picture at top of page shows Cabinet-ready PX crossover (left) and Board-only PX crossover (right).
WWW.EMINENCE.COM
31
We’ve put a tone control knob in a most unexpected place.
Introducing the world’s
first speaker with built-in,
analog tone control.
Born from a heritage of quality, tone and innovation,
the new Flux Density Modulation (FDM) Technology
from Eminence is a tonal breakthrough for guitar
players everywhere.
This revolutionary, all-analog technology puts a new
twist on guitar tone. Just turn the modulator knob
to adjust speaker output and amplifier interaction,
helping you find that sweet spot of saturated tube
tone but at a significantly lower volume. Tweak the
knob for a wide range of tones: More attenuation
affords a warmer tone while less attenuation restores
volume and brightness. It’s like switching amps in the
middle of the set. You get real attenuation without losing
the “feel” of playing through a speaker. No pedals or
expensive electronics – just a speaker, from Eminence.
Available in both the Patriot® and Red Coat® lines
of Eminence guitar speakers, the Maverick™
and ReignMaker™ models each put tonal control
at your fingertips.
text ‘fdm’ to
28553 or visit
eminence.com/fdm
for updates.
available 2010
Flux Density Modulation (FDM) Technology
from Eminence offers control of output level,
associated distortion, and tonal balance via
a simple control knob on the back of
the speaker. Patent pending.
Turn to eminence
and dial in the tone
you’ve always wanted.
www.eminence.com
GUITAR speakers
It’s no secret; musicians are
a very unique group of people.
Guitarists specialize in a
life-long quest to master an
instrument and demonstrate
a unique individuality.
through any mix. The speaker can offer you a deep, rich mellow flavor, an
articulate, percussive and driving clean sound, or a growling, howling guitar on
fire. In conjunction with your rig and your style, it provides a tonal palette that
only you can imagine.
In the following pages, Eminence presents over 30 unique specifications for
Acoustic and Electric Guitar. We have a tone that’s right for you and your rig.
We know choosing just the right guitar speaker can be confusing, so we’re here
to help. Check out our Sound Clips and our Tone Guide at
www.eminence.com/soundclips.asp. You can also e-mail us at
Some guitarists are just naturally blessed with talent. They devote countless
[email protected] or call us at 502-845-5622 for assistance.
hours perfecting their craft, but they make it look easy. Many of them can take
a $50 guitar and a dime store amplifier and still sound awesome. Other artists
With a seven-year warranty inside the continental United States, Made in the
can play the same equipment and never be satisfied with the results. They
USA, and offered at prices for the working musician, it’s
remain on a lifetime quest for the ultimate tone; always searching for the ideal
easier to “Pick Your Sound”.
never been
guitar, amplifier, effects units, pick-ups, strings, speakers, and even cables.
The most overlooked tool in the tone toolbox is the loudspeaker. Nothing short
of changing amplifiers or guitars can make such a difference in your tone.
The guitar speaker is the last element in the tone chain delivering your sound
to the audience. It can have a detrimental impact on your overall coloration,
articulation, low-end, midrange, highs, shape and extension, and ability to cut
EMINENCE.COM
Proudly presenting the ultimate solution for comparative evaluation
of guitar speakers. Log on today to review our guitar speaker
TONE GUIDE & SOUND CLIPS.
Acoustic
ACOUSTINATOR™ CX2008
ACOUSTINATOR™ NH2008
ACOUSTINATOR™ N2012
SPECIFICATION
ACOUSTINATOR™ CX2008
ACOUSTINATOR™ NH2008
ACOUSTINATOR™ N2012
8”, 203.2mm
8”, 203.2mm
12”, 304.8mm
Nominal Impedance*
8 ohms
8 ohms
8 ohms
Watts
200W
150W
150W
Music Program
400W
300W
300W
Resonance
57Hz
47Hz
31Hz
60Hz-3.5kHz
60Hz-3.3kHz
40Hz-3.5kHz
Sensitivity***
90.8
94.5
94.7
Magnet Weight
38 oz.
4 oz.
4 oz.
Gap Height
0.312”, 7.92mm
0.28”, 7.2mm
0.28”, 7.2mm
Voice Coil Diameter
2”, 50.8mm
2”, 50.8mm
2”, 50.8mm
57Hz
47Hz
31Hz
DC Resistance (Re)
5.4
5.4
7.03
0.62mH
0.44mH
0.59mH
Mechanical Q (Qms)
9.8
6.5
12.92
0.40
0.29
0.54
Total Q (Qts)
0.39
0.28
0.52
64cc
76cc
203cc
0.33mm/N
0.50mm/N
0.46mm/N
BL Product (BL)
10.7 T-M
11.2 T-M
12.1 T-M
24 grams
23 grams
57 grams
143
162
57
3.0mm
3.5mm
3.9mm
214.1 cm2
218.2 cm2
519.5 cm2
6.0mm
8.0mm
8.0mm
Sealed
11-14 liters/ 0.38-0.48 cu.ft.
8-9.3 liters/ 0.28-0.33 cu.ft.
28-50 liters/ 1-1.75 cu.ft.
Vented
11-31 liters/ 0.4-1.1 cu.ft.
12-25.5 liters/ 0.41-0.9 cu.ft.
59.5-85 liters/ 2.1-3 cu.ft.
Overall Diameter
8.24”, 209.2mm
8.24”, 209.2mm
12.26”, 311.4mm
7.13”, 181mm
7.13”, 181mm
11”, 279.5mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
N/A
N/A
Fitted as standard
0.22”, 5.5mm
0.22”, 5.5mm
0.25”, 6.4mm
7.75”, 196.9mm
7.75”, 196.9mm
11.71”, 297.5mm
Depth
3.6”, 92mm
3.6”, 92mm
5.1”, 130mm
Net Weight
6.7 lbs., 3 kg
3.2 lbs., 1.5 kg
4.3 lbs., 2 kg
Shipping Weight
7.4 lbs., 3.4 kg
3.9 lbs., 1.8 kg
6 lbs., 2.7 kg
Coil Construction
Copper voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Polyimide former
Magnet Composition
Ferrite magnet
Neodymium magnet
Neodymium magnet
Core Details
Tapered coax core
Non-vented core
Non-vented core
Basket Materials
Cone Composition
Polypropylene Cone
Hemp Cone ô
Polypropylene Cone
Rubber cone edge
Santoprene cone edge
Santoprene cone edge
Zurette dust cap
Power Rating**
34
LEGEND 1028K
LEGEND 1218
LEGEND 1058
LEGEND GB128
LEGEND 1028K
LEGEND 1058
LEGEND 1218
LEGEND GB128
10”, 254mm
10”, 254mm
12”, 304.8mm
12”, 304.8mm
8 ohms
8 or 16 ohms
8 ohms
8 ohms
35W
75W
150W
50W
N/A
N/A
N/A
N/A
95Hz
97Hz
100Hz
86Hz
100Hz-5.5kHz
100Hz-6kHz
80Hz-4.2kHz
80Hz-5.1kHz
97.4
98.7
98.8
101.4
6 oz.
16 oz.
38 oz.
38 oz.
0.25”, 6.2mm
0.25”, 6.35mm
0.312”, 7.92mm
0.312”, 7.92mm
1”, 25.4mm
1.5”, 38.1mm
2”, 50.8mm
1.75”, 44.5mm
95Hz
97Hz
100Hz
86Hz
5.8
7.49
6.95
6.37
0.51mH
0.56mH
0.69mH
0.64mH
17.96
17.78
15.51
19.54
1.61
1.21
0.95
0.67
1.47
1.13
0.89
0.65
72cc
0cc
41cc
41cc
0.19mm/N
0.16mm/N
0.09mm/N
0.12mm/N
5.7 T-M
8.0 T-M
11.6 T-M
12.0 T-M
15 grams
17 grams
29 grams
28 grams
59
80
105
128
2.1mm
0.0mm
0.8mm
0.8mm
344.9 cm2
344.9 cm2
506.7 cm2
506.7 cm2
N/A
N/A
N/A
N/A
Acceptable
Acceptable
N/A
Acceptable
Acceptable
Acceptable
Acceptable
Acceptable
10.11”, 256.8mm
10.11”, 256.8mm
12.03”, 305.5mm
12.03”, 305.5mm
9.05”, 229.9mm
9.13”, 231.8mm
10.95”, 278.1mm
10.95”, 278.1mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
N/A
Fitted as standard
Fitted as standard
Fitted as standard
0.22”, 5.6mm
0.23”, 5.7mm
0.25”, 6.4mm
0.25”, 6.4mm
9.6”, 243.8mm
9.6”, 243.8mm
11.59”, 294.3mm
11.59”, 294.3mm
4.8”, 122mm
4.1”, 104mm
4.5”, 114mm
6.06”, 154mm
2.9 lbs., 1.3 kg
4.4 lbs., 2 kg
8.4 lbs., 3.8 kg
8.1 lbs., 3.7 kg
4 lbs., 1.8 kg
5.4 lbs., 2.5 kg
10.6 lbs., 4.8 kg
10.1 lbs., 4.6 kg
Copper voice coil
Copper voice coil
Copper voice coil
Copper voice coil
Polyimide former
Polyimide former
Polyimide former
Paper former
Alnico magnet
Ferrite magnet
Ferrite magnet
Ferrite magnet
Non-vented core
Non-vented core
Non-vented core
Non-vented core
Paper Cone
Paper Cone
Paper Cone
Paper Cone
Paper cone edge
Paper cone edge
Paper cone edge
Paper cone edge
Zurette dust cap
Zurette dust cap
WWW.EMINENCE.COM
35
LEGEND V128
LEGEND 1258
LEGEND 1518
SPECIFICATION
LEGEND V128
LEGEND 1258
LEGEND 1518
12”, 304.8mm
12”, 304.8mm
15”, 381mm
Nominal Impedance*
8 ohms
8 ohms
8 ohms
Watts
120W
75W
150W
Music Program
N/A
N/A
N/A
Resonance
89Hz
94Hz
82Hz
80Hz-5kHz
80Hz-4kHz
60Hz-4kHz
Sensitivity***
100.9
100.1
102.2
Magnet Weight
38 oz.
34 oz.
59 oz.
Gap Height
0.312”, 7.92mm
0.312”, 7.92mm
0.312”, 7.92mm
Voice Coil Diameter
1.75”, 44.5mm
1.5”, 38.1mm
2”, 50.8mm
89Hz
94Hz
82Hz
DC Resistance (Re)
6.37
7.44
7.16
0.64mH
0.70mH
0.86mH
Mechanical Q (Qms)
11.98
6.15
10.12
0.83
1.18
1.02
Total Q (Qts)
0.77
0.99
0.93
42cc
24cc
66cc
0.10mm/N
0.09mm/N
0.07mm/N
BL Product (BL)
11.5 T-M
10.9 T-M
14.1 T-M
30 grams
32 grams
55 grams
107
80
80
0.8mm
0.5mm
0.8mm
519.5 cm2
506.7 cm2
823.7 cm2
N/A
N/A
N/A
Sealed
Acceptable
N/A
N/A
Vented
Acceptable
Acceptable
Acceptable
Overall Diameter
12.03”, 305.5mm
12.03”, 305.5mm
15.15”, 384.8mm
10.95”, 278.1mm
10.95”, 278.1mm
13.77”, 349.6mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
N/A
Fitted as standard
N/A
0.25”, 6.4mm
0.25”, 6.4mm
0.25”, 6.4mm
11.59”, 294.3mm
11.59”, 294.3mm
14.56”, 369.9mm
Depth
6.06”, 154mm
4.9”, 125mm
6.1”, 155mm
Net Weight
8.1 lbs., 3.7 kg
7.8 lbs., 3.5 kg
12.1 lbs., 5.5 kg
Shipping Weight
10.1 lbs., 4.6 kg
9.9 lbs., 4.5 kg
14.1 lbs., 6.4 kg
Coil Construction
Copper voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Polyimide former
Magnet Composition
Ferrite magnet
Ferrite magnet
Ferrite magnet
Core Details
Non-vented core
Non-vented core
Non-vented core
Basket Materials
Cone Composition
Paper Cone
Paper Cone
Paper Cone
Paper cone edge
Paper cone edge
Paper cone edge
Zurette dust cap
Power Rating**
36
THE COPPERHEAD™
DELTA DEMON™
LIL’ BUDDY™
THE COPPERHEAD™
DELTA DEMON™
LIL’ BUDDY™
10”, 254mm
10”, 254mm
10”, 254mm
8 ohms
8 ohms
8 ohms
75W
100W
50W
N/A
N/A
N/A
105Hz
76Hz
149Hz
70Hz-5kHz
80Hz-3kHz
80Hz-5kHz
99
96.9
99.1
20 oz.
30 oz.
30 oz.
0.312”, 7.92mm
0.312”, 7.92mm
0.312”, 7.92mm
1.5”, 38.1mm
2”, 50.8mm
1.75”, 44.5mm
105Hz
76Hz
149Hz
7.59
6.9
6.31
0.37mH
0.66mH
0.46mH
13.27
15.06
9.06
1.05
0.53
0.93
0.98
0.51
0.84
0cc
88cc
29cc
0.14mm/N
0.22mm/N
0.05mm/N
8.8 T-M
11.3 T-M
11.7 T-M
16 grams
21 grams
22 grams
100
143
160
0.0mm
2.4mm
0.8mm
366.1 cm2
366.1 cm2
366.1 cm2
N/A
N/A
N/A
Acceptable
Acceptable
N/A
Acceptable
N/A
Acceptable
10.11”, 256.8mm
10.09”, 256.2mm
10.11”, 256.8mm
9.13”, 231.8mm
9.05”, 229.7mm
9.13”, 231.8mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
0.23”, 5.7mm
0.25”, 6.4mm
0.23”, 5.7mm
9.6”, 243.8mm
9.66”, 245.4mm
9.6”, 243.8mm
4.2”, 107mm
3.8”, 97mm
4.3”, 109mm
4.5 lbs., 2 kg
6.8 lbs., 3.1 kg
6.3 lbs., 2.9 kg
6.4 lbs., 2.9 kg
8.5 lbs., 3.9 kg
7.4 lbs., 3.4 kg
Copper voice coil
Copper voice coil
Copper voice coil
Polyimide former
Polyimide former
Paper former
Ferrite magnet
Ferrite magnet
Ferrite magnet
Non-vented core
Vented core
Non-vented core
Paper Cone
Paper Cone
Hemp Cone ™
Paper cone edge
Paper cone edge
Paper cone edge
Zurette dust cap
Zurette dust cap
WWW.EMINENCE.COM
37
RAGIN CAJUN™
BLACK MOUNTAIN™
BLACK POWDER™
SPECIFICATION
RAGIN CAJUN™
BLACK MOUNTAIN™
BLACK POWDER™
10”, 254mm
12”, 304.8mm
12”, 304.8mm
Nominal Impedance*
8 ohms
8 ohms
8 ohms
Watts
75W
30W
75W
Music Program
N/A
N/A
N/A
Resonance
84Hz
69Hz
72Hz
70Hz-5kHz
70Hz-5.5kHz
70Hz-5kHz
Sensitivity***
100
101.3
100
Magnet Weight
30 oz.
35 oz.
30 oz.
Gap Height
0.312”, 7.92mm
0.312”, 7.94mm
0.312”, 7.92mm
Voice Coil Diameter
1.5”, 38.1mm
1.75”, 44.45mm
1.5”, 38.1mm
84Hz
68.58Hz
72Hz
DC Resistance (Re)
7.3
6.44
7.1
0.39mH
.62 mH
0.37mH
Mechanical Q (Qms)
10.8
8.13
14.98
0.68
0.53
0.75
Total Q (Qts)
0.64
0.50
0.72
69.64 liters / 2.46 cu.ft.
18cc
40cc
25cc
0.18mm/N
0.19 mm/N
0.22mm/N
BL Product (BL)
11.5 T-M
12.07 T-M
9.9 T-M
20 grams
27.8 grams
23 grams
156
129.2
96
0.5mm
0.8mm
0.5mm
366.1 cm2
506.7 cm2
519.5 cm2
N/A
N/A
N/A
Sealed
Acceptable
Acceptable
N/A
Vented
Acceptable
N/A
Acceptable
Overall Diameter
10.11”, 256.8mm
12.26”, 311.4mm
12.23”, 310.5mm
9.13”, 231.8mm
11.06”, 280.9mm
11.02”, 279.8mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.23”, 5.7mm
0.25”, 6.4mm
0.25”, 6.4mm
9.6”, 243.8mm
11.71”, 297.4mm
11.67”, 296.4mm
Depth
4.3”, 109mm
5.95”, 151.1mm
4.6”, 117mm
Net Weight
6.4 lbs., 2.9 kg
8.9 lbs, 4.04 kg
7 lbs., 3.2 kg
Shipping Weight
8.2 lbs., 3.7 kg
11.1 lbs, 5 kg
9 lbs., 4.1 kg
Power Rating**
Coil Construction
Copper voice coil
Copper Voice Coil
Copper voice coil
Coil Former
Polyimide former
Paper former
Polyimide former
Magnet Composition
Ferrite magnet
Alnico magnet
Ferrite magnet
Core Details
Non-vented core
Non-vented core
Non-vented core
Basket Materials
Cone Composition
Paper Cone
Seamed Paper Cone
Paper Cone
Paper cone edge
Paper cone edge
Paper cone edge
Zurette dust cap
Zurette dust cap
38
CANIS MAJOR™
CANNABIS REX™
COMMONWEALTH™ 12
CANIS MAJOR™
CANNABIS REX™
COMMONWEALTH™ 12
12”, 305mm
12”, 304.8mm
12”, 304.8mm
8 ohms
8 or 16 ohms
8 ohms
50W
50W
225W
N/A
N/A
N/A
105Hz
96Hz
50Hz
70Hz-4kHz
70Hz-5kHz
50Hz-4kHz
102
102
100
35 oz.
38 oz.
109 oz.
0.312”, 7.92mm
0.312”, 7.92mm
0.29”, 7.2mm
1.75”, 44.5mm
1.75”, 44.5mm
4”, 101.6mm
104.86Hz
96Hz
50Hz
6.45
6.56
6.34
0.61mH
0.44mH
0.46mH
10.16
9.28
6.61
0.71
0.69
0.35
0.66
0.64
0.33
42cc
45cc
36cc
0.09mm/N
0.11mm/N
0.24mm/N
12.6 T-M
11.8 T-M
15.7 T-M
26.6 grams
24 grams
43 grams
147.6
139
143
0.8mm
0.8mm
0.7mm
532.4 cm2
558.6 cm2
519.5 cm2
N/A
N/A
N/A
Acceptable
Acceptable
Acceptable
Acceptable
Acceptable
Acceptable
12.02”, 305.3mm
12.02”, 305.3mm
12.28”, 312.0mm
10.97”, 278.6mm
10.97”, 278.6mm
11.08”, 281.3mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
N/A
0.25”, 6.4mm
0.25”, 6.4mm
0.27”, 6.8mm
11.63”, 295.4mm
11.63”, 295.4mm
11.69”, 297.0mm
6.2”. 157.5mm
5.1”, 130mm
5”, 127mm
9.3 lbs., 4.2 kg
8.2 lbs., 3.7 kg
21.5 lbs., 9.8 kg
10.2 lbs., 4.63 kg
9.8 lbs., 4.5 kg
23.2 lbs., 10.5 kg
Copper voice coil
Copper voice coil
Aluminum voice coil
Paper former
Paper former
Polyimide former
Alnico magnet
Ferrite magnet
Ferrite magnet
Non-vented core
Non-vented core
Vented core
Hemp Cone ™
Hemp Cone ™
Paper Cone
Paper cone edge
Paper cone edge
Cloth cone edge
Zurette dust cap
Zurette dust cap
Aluminum dust cap
WWW.EMINENCE.COM
39
RED WHITE AND BLUES™
LIL’ TEXAS™
SCREAMIN EAGLE™
SPECIFICATION
LIL’ TEXAS™
RED WHITE AND BLUES™
SCREAMIN EAGLE™
12”, 304.8mm
12”, 304.8mm
12”, 304.8mm
Nominal Impedance*
8 or 16 ohms
8 ohms
8 or 16 ohms
Watts
125W
120W
50W
Music Program
N/A
N/A
N/A
Resonance
90Hz
110Hz
79Hz
70Hz-5.5kHz
70Hz-4.5kHz
65Hz-5.5kHz
Sensitivity***
101
101
101
Magnet Weight
4 oz.
38 oz.
38 oz.
Gap Height
0.28”, 7.2mm
0.312”, 7.92mm
0.312”, 7.92mm
Voice Coil Diameter
2”, 50.8mm
1.75”, 44.5mm
1.75”, 44.5mm
90Hz
110Hz
79Hz
DC Resistance (Re)
7.2
6.42
6.84
0.42mH
0.43mH
0.48mH
Mechanical Q (Qms)
11.29
7.19
15.95
0.69
0.89
0.60
Total Q (Qts)
0.65
0.79
0.58
66cc
45cc
64cc
0.11mm/N
0.07mm/N
0.13mm/N
BL Product (BL)
12.8 T-M
12.3 T-M
13.1 T-M
28 grams
30 grams
30 grams
130
124
132
1.3mm
0.8mm
1.2mm
519.5 cm2
558.6 cm2
519.5 cm2
N/A
N/A
N/A
Sealed
Acceptable
Acceptable
Acceptable
Vented
Acceptable
Acceptable
Acceptable
Overall Diameter
12.03”, 305.5mm
12.02”, 305.3mm
12.02”, 305.3mm
10.95”, 278.1mm
10.97”, 278.6mm
10.97”, 278.6mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.25”, 6.4mm
0.25”, 6.4mm
0.25”, 6.4mm
11.59”, 294.3mm
11.63”, 295.4mm
11.63”, 295.4mm
Depth
5.07”, 129mm
5.1”, 130mm
5.1”, 130mm
Net Weight
4.1 lbs., 1.9 kg
8.2 lbs., 3.7 kg
8.3 lbs., 3.8 kg
Shipping Weight
5.8 lbs., 2.6 kg
10.1 lbs., 4.6 kg
10 lbs., 4.5 kg
Coil Construction
Copper voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Paper former
Magnet Composition
Neodymium magnet
Ferrite magnet
Ferrite magnet
Core Details
Non-vented core
Non-vented core
Non-vented core
Basket Materials
Cone Composition
Paper Cone
Paper Cone
Paper Cone
Paper cone edge
Paper cone edge
Paper cone edge
Zurette dust cap
Zurette dust cap
Zurette dust cap
Power Rating**
40
SWAMP THANG™
TEXAS HEAT™
COMMONWEALTH™ 15
SWAMP THANG™
TEXAS HEAT™
COMMONWEALTH™ 15
12”, 304.8mm
12”, 304.8mm
15”, 381mm
8 or 16 ohms
8, 4 or 16 ohms
4 ohms
150W
150W
225W
N/A
N/A
N/A
97Hz
79Hz
52Hz
70Hz-5kHz
70Hz-5kHz
50Hz-4kHz
102
99
100.8
59 oz.
38 oz.
109 oz.
0.312”, 7.92mm
0.312”, 7.92mm
0.29”, 7.2mm
2”, 50.8mm
2”, 50.8mm
4”, 101.6mm
97Hz
79Hz
52Hz
6.92
7.3
3.72
0.42mH
0.54mH
0.22mH
14.43
13.88
6.75
0.55
0.68
0.57
0.53
0.65
0.53
43cc
42cc
29cc
0.10mm/N
0.13mm/N
0.15mm/N
14.2 T-M
12.8 T-M
11.8 T-M
26 grams
31 grams
65 grams
177
116
91
0.8mm
0.8mm
0.3mm
532.4 cm2
519.5 cm2
889.6 cm2
N/A
N/A
N/A
Acceptable
Acceptable
Acceptable
Acceptable
Acceptable
Acceptable
12.01”, 305.1mm
12.02”, 305.3mm
15.28”, 388.0mm
10.95”, 278.1mm
10.97”, 278.6mm
14.06”, 357.0mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
N/A
0.25”, 6.4mm
0.25”, 6.4mm
0.26”, 6.5mm
11.63”, 295.4mm
11.63”, 295.4mm
14.57”, 370.0mm
5.2”, 132mm
5.1”, 130mm
6”, 152mm
11.1 lbs., 5 kg
8.3 lbs., 3.8 kg
22.6 lbs., 10.3 kg
12.8 lbs., 5.8 kg
10 lbs., 4.5 kg
24.8 lbs., 11.3 kg
Copper voice coil
Copper voice coil
Aluminum voice coil
Polyimide former
Polyimide former
Polyimide former
Ferrite magnet
Ferrite magnet
Ferrite magnet
Non-vented core
Non-vented core
Vented core
Paper Cone
Paper Cone
Paper Cone
Paper cone edge
Paper cone edge
Cloth cone edge
Zurette dust cap
Zurette dust cap
Aluminum dust cap
WWW.EMINENCE.COM
41
RAMROD™
RED FANG™ 10
THE GOVERNOR™
SPECIFICATION
RAMROD™
RED FANG™ 10
THE GOVERNOR™
10”, 254mm
10’’, 254mm
12”, 304.8mm
Nominal Impedance*
8 ohms
8 ohms
8 or 16 ohms
Watts
75W
50W
75W
Music Program
N/A
N/A
N/A
Resonance
101Hz
111Hz
101Hz
80Hz-5kHz
70Hz-4.5kHz
70Hz-5kHz
Sensitivity***
100
102
102
Magnet Weight
30 oz.
35 oz.
56 oz.
Gap Height
0.312”, 7.92mm
0.312’’, 7.92mm
0.312”, 7.92mm
Voice Coil Diameter
1.5”, 38.1mm
1.75’’, 44.5mm
1.75”, 44.5mm
101Hz
111Hz
101Hz
DC Resistance (Re)
7.3
5.8
6.81
0.39mH
0.55mH
0.41mH
Mechanical Q (Qms)
10.80
12.64
11.41
0.68
0.50
0.59
Total Q (Qts)
0.64
0.48
0.56
21.3 liters/.75 cu.ft.
18cc
17cc
64cc
0.13mm/N
0.11mm/N
0.08mm/N
BL Product (BL)
11.5 T-M
12.1 T-M
15.3 T-M
19 grams
18 grams
32 grams
149
223
171
0.5mm
0.47mm
1.2mm
366.1 cm2
366.1 cm2
519.5 cm2
N/A
N/A
N/A
Sealed
Acceptable
Acceptable
Acceptable
Vented
Acceptable
Acceptable
Acceptable
Overall Diameter
10.11”, 256.8mm
10.11’’, 256.8mm
12.02”, 305.3mm
9.13”, 231.8mm
9.13’’, 231.9mm
10.97”, 278.6mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.23”, 5.7mm
0.23’’, 5.8mm
0.25”, 6.4mm
9.6”, 243.8mm
9.6’’, 243.8mm
11.63”, 295.4mm
Depth
4.3”, 109mm
5.2’’, 132mm
5.2”, 132mm
Net Weight
5.4 lbs., 2.5 kg
7.7 lbs., 3.5 kg
10.8 lbs., 4.9 kg
Shipping Weight
8.3 lbs., 3.8 kg
8.5 lbs., 3.9 kg
12.6 lbs., 5.7 kg
Coil Construction
Copper voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Nomex former
Nomex former
Magnet Composition
Ferrite magnet
Alnico magnet
Ferrite magnet
Core Details
Non-vented core
Non-vented core
Non-vented core
Basket Materials
Cone Composition
Paper Cone
Paper cone
Paper Cone
Paper cone edge
Paper cone edge
Paper cone edge
Zurette dust cap
Zurette dust cap
Zurette dust cap
Power Rating**
42
LYNCH SUPER V12™
MAN O WAR™
PRIVATE JACK™
LYNCH SUPER V12™
MAN O WAR™
PRIVATE JACK™
12”, 304.8mm
12”, 304.8mm
12”, 304.8mm
8 ohms
8 or 16 ohms
8 or 16 ohms
150W
120W
50W
N/A
N/A
N/A
85Hz
91Hz
96Hz
70Hz-4.5kHz
70Hz-5.5kHz
70Hz-5kHz
99.2
102
101
38 oz.
38 oz.
38 oz.
0.313”, 7.95mm
0.312”, 7.92mm
0.312”, 7.92mm
2”, 50.8mm
1.75”, 44.5mm
1.75”, 44.5mm
85Hz
91Hz
96Hz
7.25
6.2
7.01
0.83mH
0.43mH
0.49mH
13.87
11.66
18.19
0.72
0.72
0.72
0.69
0.68
0.69
41cc
42cc
64cc
0.116mm/N
0.10mm/N
0.09mm/N
12.7 T-M
12.3 T-M
13.5 T-M
30 grams
31 grams
31 grams
117
127
134
0.79mm
0.8mm
1.2mm
519.5 cm2
519.5 cm2
519.5 cm2
N/A
N/A
N/A
Acceptable
Acceptable
Acceptable
Acceptable
Acceptable
Acceptable
12.38”, 314.5mm
12.02”, 305.3mm
12.02”, 305.3mm
11.07”, 281.0mm
10.97”, 278.6mm
10.97”, 278.6mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
0.27”, 6.9mm
0.25”, 6.4mm
0.25”, 6.4mm
11.57”, 293.8mm
11.63”, 295.4mm
11.63”, 295.4mm
5.46”, 138.7mm
5.2”, 132mm
5.1”, 130mm
9.7 lbs., 4.4 kg
8.1 lbs., 3.7 kg
8 lbs., 3.6 kg
11.5 lbs., 5.22 kg
9.9 lbs., 4.5 kg
9.8 lbs., 4.5 kg
Copper voice coil
Copper voice coil
Copper voice coil
Polyimide former
Polyimide former
Paper former
Ferrite magnet
Ferrite magnet
Ferrite magnet
Non-vented core
Non-vented core
Non-vented core
Paper Cone
Paper Cone
Paper Cone
Paper cone edge
Paper cone edge
Paper cone edge
Zurette dust cap
Zurette dust cap
Zurette dust cap
WWW.EMINENCE.COM
43
RED FANG™
THE TONESPOTTER™
THE TONKER™
SPECIFICATION
RED FANG™
THE TONESPOTTER™
THE TONKER™
12”, 304.8mm
12”, 304.8mm
12”, 304.8mm
Nominal Impedance*
8 or 16 ohms
8 ohms
8 or 16 ohms
Watts
50W
75W
150W
Music Program
N/A
N/A
N/A
Resonance
97Hz
88Hz
89Hz
70Hz-5.5kHz
70Hz-5.5kHz
70Hz-5.5kHz
Sensitivity***
103
100.7
102
Magnet Weight
35 oz.
38 oz.
59 oz.
Gap Height
0.312”, 7.92mm
0.312”, 7.92mm
0.312”, 7.92mm
Voice Coil Diameter
1.75”, 44.5mm
1.75”, 44.5mm
2”, 50.8mm
97Hz
88Hz
89Hz
DC Resistance (Re)
5.72
6.76
7.36
0.39mH
0.47mH
0.47mH
Mechanical Q (Qms)
13.39
10.04
10.02
0.74
0.73
0.49
Total Q (Qts)
0.70
0.68
0.47
25cc
64cc
42cc
0.10mm/N
0.10mm/N
0.09mm/N
BL Product (BL)
11.1 T-M
12.7 T-M
17.4 T-M
26 grams
32 grams
36 grams
131
120
181
0.5mm
1.2mm
0.8mm
519.5 cm2
519.5 cm2
519.5 cm2
N/A
N/A
N/A
Sealed
Acceptable
Acceptable
Acceptable
Vented
Acceptable
Acceptable
Acceptable
Overall Diameter
12.02”, 305.3mm
12.02”, 305.3mm
12.02”, 305.3mm
10.97”, 278.6mm
10.97”, 278.6mm
10.97”, 278.6mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
Fitted as standard
0.25”, 6.4mm
0.25”, 6.4mm
0.25”, 6.4mm
11.63”, 295.4mm
11.63”, 295.4mm
11.63”, 295.4mm
Depth
6.2”, 158mm
5.1”, 130mm
5.2”, 132mm
Net Weight
9.3 lbs., 4.2 kg
8 lbs., 3.6 kg
11.1 lbs., 5 kg
Shipping Weight
11.1 lbs., 5 kg
9.8 lbs., 4.5 kg
13.2 lbs., 6 kg
Coil Construction
Copper voice coil
Copper voice coil
Copper voice coil
Coil Former
Nomex former
Paper former
Polyimide former
Magnet Composition
Alnico magnet
Ferrite magnet
Ferrite magnet
Core Details
Non-vented core
Non-vented core
Non-vented core
Basket Materials
Cone Composition
Paper Cone
Paper Cone
Paper Cone
Paper cone edge
Paper cone edge
Paper cone edge
Zurette dust cap
Zurette dust cap
Zurette dust cap
Power Rating**
44
THE WIZARD™
TONKERLITE™
BIG BEN
THE WIZARD™
TONKERLITE™
BIG BEN
12”, 304.8mm
12”, 304.8mm
15”, 381mm
8 or 16 ohms
8 or 16 ohms
8 ohms
75W
125W
225W
N/A
N/A
N/A
89Hz
109Hz
85Hz
70Hz-5.5kHz
70Hz-5.5kHz
70Hz-3.5kHz
103
101
101.5
56 oz.
4 oz.
56 oz.
0.312”, 7.92mm
0.28”, 7.2mm
0.375”, 9.53mm
1.75”, 44.5mm
2”, 50.8mm
2.5”, 63.5mm
89Hz
109Hz
85Hz
6.13
7.2
6.06
0.38mH
0.42mH
0.51mH
11.48
12.58
10.63
0.49
0.85
1.04
0.47
0.8
0.94
42cc
61cc
0cc
0.11mm/N
0.07mm/N
0.08mm/N
14.4 T-M
13.1 T-M
12.1 T-M
30 grams
30 grams
47 grams
181
129
82
0.8mm
1.2mm
0.0mm
519.5 cm2
519.5 cm2
856.3 cm2
N/A
N/A
N/A
Acceptable
Acceptable
N/A
N/A
Acceptable
Acceptable
12.02”, 305.3mm
12.02”, 305.3mm
15.13”, 384.2mm
10.97”, 278.6mm
10.97”, 278.6mm
13.8”, 350.5mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
0.25”, 6.4mm
0.25”, 6.4mm
0.25”, 6.4mm
11.63”, 295.4mm
11.63”, 295.4mm
14.56”, 369.9mm
5.2”, 132mm
5.1”, 129mm
6.1”, 155mm
10.8 lbs., 4.9 kg
4.1 lbs., 1.9 kg
12.6 lbs., 5.7 kg
12.5 lbs., 5.7 kg
5.8 lbs., 2.6 kg
14.9 lbs., 6.8 kg
Copper voice coil
Copper voice coil
Copper voice coil
Nomex former
Polyimide former
Polyimide former
Ferrite magnet
Neodymium magnet
Ferrite magnet
Non-vented core
Non-vented core
Non-vented core
Paper Cone
Paper Cone
Paper Cone
Paper cone edge
Paper cone edge
Paper cone edge
Zurette dust cap
Zurette dust cap
Zurette dust cap
WWW.EMINENCE.COM
45
bass guitar
Look inside most any professional
or name brand bass amplifier or
enclosure and you’re going to find
custom designed, Eminence bass
guitar speakers.
via public transportation and can’t carry another pound. No matter your
circumstances, there’s no reason to compromise on your tone!
The world’s best bass gear manufacturers can’t be wrong, and neither should
you. Whether you need to replace a single speaker or want to completely revamp your entire rig, let the bass experts at Eminence give you a hand. We’re
here to help! 502-845-5622 or [email protected].
With a seven-year warranty inside the continental United States, Made in the
No other speaker manufacturer has a better understanding of bass guitar
USA, and offered at prices for the working musician, it’s never been easier to
enclosures and the physics of the woofers required to hold your back line together.
put your rig on the Richter scale.
Whether you’re packing a 20lb. practice amp or a 150lb. 8X10 seismic generator,
you’ve chosen your rig to cut through the mix with your signature sound.
Maybe you want fast, tight, and articulate, or perhaps you need a fat, round,
and warm tone. Maybe you need a speaker that gives you the best of both worlds.
You might be playing the CMA awards, have 4 roadies and care less how much
your gear weighs, or perhaps your humping yourself to a club in Manhattan
PA & Musician Speaker Components
A Premier Eminence Stocking Distributor
Tel: 1-877-732-5374 | www.usspeaker.com
BASSLITE® CH2010
BASSLITE® CA2010
BASSLITE® S2010
SPECIFICATION
BASSLITE® CA2010
BASSLITE® CH2010
BASSLITE® S2010
10”, 254mm
10”, 254mm
10”, 254mm
Nominal Impedance*
8 ohms
8 ohms
8 ohms
Watts
150W
150W
150W
Music Program
300W
300W
300W
Resonance
51Hz
58Hz
46Hz
48Hz-7kHz
54Hz-3kHz
54Hz-4kHz
Sensitivity***
93.5
96.7
96.2
Magnet Weight
4 oz.
4 oz.
4 oz.
Gap Height
0.28”, 7.2mm
0.28”, 7.2mm
0.28”, 7.2mm
Voice Coil Diameter
2”, 50.8mm
2”, 50.8mm
2”, 50.8mm
51Hz
58Hz
46Hz
DC Resistance (Re)
5.46
5.37
5.02
0.55mH
0.52mH
0.47mH
Mechanical Q (Qms)
17.5
6.5
4.16
0.52
0.47
0.34
Total Q (Qts)
0.51
0.44
0.31
126cc
120cc
140cc
0.27mm/N
0.26mm/N
0.36mm/N
BL Product (BL)
11.2 T-M
11.1 T-M
11.9 T-M
37 grams
30 grams
33 grams
98
123
135
3.5mm
3.5mm
4.0mm
360.7 cm2
344.9 cm2
350.1 cm2
7.0mm
7.5mm
8.0mm
Sealed
17-23 liters/ 0.6-0.8 cu.ft.
N/A
N/A
Vented
23-54 liters/ 0.8-1.9 cu.ft.
17-51 liters/ 0.6-1.8 cu.ft.
20-51 liters/ 0.7-1.8 cu.ft.
Overall Diameter
10.25”, 260.4mm
10.25”, 260.4mm
10.08”, 256mm
9.13”, 231.9mm
9.13”, 231.9mm
9.05”, 229.9mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
Fitted as standard
Fitted as standard
N/A
0.28”, 7.0mm
0.28”, 7.0mm
0.25”, 6.4mm
9.73”, 247.1mm
9.73”, 247.1mm
9.66”, 245.4mm
Depth
4.75”, 121mm
4.75”, 121mm
4.25”, 108mm
Net Weight
3.6 lbs.,1.6 kg
3.6 lbs.,1.6 kg
3.5 lbs., 1.6 kg
Shipping Weight
4.7 lbs., 2.1 kg
4.7 lbs., 2.1 kg
4.6 lbs., 2.1 kg
Coil Construction
Copper voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Polyimide former
Magnet Composition
Neodymium magnet
Neodymium magnet
Neodymium magnet
Core Details
Non-vented core
Non-vented core
Non-vented core
Basket Materials
Cone Composition
Aluminum Alloy Cone
Hemp Cone ô
Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Zurette dust cap
Power Rating**
WWW.EMINENCE.COM
47
bass guitar
LEGEND B102
LEGEND BP102
LEGEND B810
SPECIFICATION
LEGEND B102
LEGEND BP102
LEGEND B810
10”, 254mm
10”, 254mm
10”, 254mm
Nominal Impedance*
8 ohms
8 or 4 ohms
32 ohms
Watts
200W
200W
150W
Music Program
400W
400W
300W
Resonance
48Hz
35Hz
52Hz
44Hz-4kHz
40Hz-2kHz
49Hz-5.1kHz
Sensitivity***
93
92
92.7
Magnet Weight
45 oz.
38 oz.
30 oz.
Gap Height
0.312”, 7.92mm
0.312”, 7.92mm
0.312”, 7.94mm
Voice Coil Diameter
2”, 50.8mm
2”, 50.8mm
2”, 50.8mm
48Hz
35Hz
52.07Hz
DC Resistance (Re)
6.89
5.59
27.5
0.67mH
0.83mH
2.72mH
Mechanical Q (Qms)
5.31
5.36
13.91
0.42
0.47
0.68
Total Q (Qts)
0.39
0.43
0.65
104cc
207cc
165.2cc
0.40mm/N
0.54mm/N
0.39mm/N
BL Product (BL)
11.8 T-M
10.0 T-M
17.7 T-M
28 grams
38 grams
23.8 grams
113
75
76.8
3.0mm
6.2mm
4.7mm
344.9 cm2
334.5 cm2
350.1 cm2
8.0mm
10.0mm
9.5mm
Sealed
N/A
14-28 liters/ 0.5-1 cu.ft.
14-35 liters/0.5-1.3 cu.ft.
Vented
18-85 liters/0.63-3 cu.ft.
25.5-62 liters/ 0.9-2.2 cu.ft.
45-76 liters/1.6-2.7 cu.ft.
Overall Diameter
10.25”, 260.4mm
10.08”, 256.1mm
10.11”, 256.8mm
9.13”, 231.8mm
9.05”, 229.7mm
9.13”, 231.9mm
Fitted as standard
Fitted as standard
Fitted as standard
Rear Sealing Gasket
N/A
N/A
Fitted as standard
0.28”, 7.1mm
0.25”, 6.4mm
0.23”, 5.7mm
9.63”, 244.5mm
9.66”, 245.4mm
9.60”, 243.8mm
Depth
4.33”, 110mm
4.25”, 108mm
4.08”, 103.6mm
Net Weight
9.7 lbs., 4.4 kg
8.9 lbs., 4 kg
6.7 lbs, 3.04 kg
Shipping Weight
10.9 lbs., 4.9 kg
9.1 lbs., 4.1 kg
7.9 lbs, 3.6 kg
Coil Construction
Copper voice coil
Copper voice coil
Copper voice coil
Coil Former
Polyimide former
Polyimide former
Kapton
Magnet Composition
Ferrite magnet
Ferrite magnet
Ferrite magnet
Core Details
Non-vented core
Non-vented core
Basket Materials
Cone Composition
Paper Cone
Paper Cone
Paper Cone
Cloth cone edge
Cloth cone edge
Cloth cone edge
Zurette dust cap
Zurette dust cap
Power Rating**
48
BASSLITE® S2012
BASSLITE® S2012
BASSLITE® C2515
LEGEND CB158
LEGEND CA154
BASSLITE® C2515
LEGEND CA154
LEGEND CB158
12”, 304.8mm
15”, 381mm
15”, 381mm
15”, 381mm
8 ohms
4 ohms
4 ohms
8 ohms
150W
300W
300W
300W
300W
600W
600W
600W
48Hz
38Hz
51.Hz
34Hz
49Hz-4.5kHz
52Hz-2.5kHz
45Hz-3.0kHz
47Hz-3kHz
97
98
96.9
98
4 oz.
7 oz.
56 oz.
80 oz.
0.28”, 7.2mm
0.28”, 7mm
.38”, 9.53mm
0.375”, 9.53mm
2”, 50.8mm
2.5”, 63.5mm
2.5”, 63.5mm
2.5”, 63.5mm
48Hz
38Hz
51Hz
34Hz
5.1
3.72
2.9
6.15
0.43mH
0.39mH
0.80mH
0.33mH
5.5
4.7
4.94
5.9
0.53
0.50
0.54
0.36
0.48
0.45
0.49
0.34
108.2 liters / 3.82 cu.ft.
270cc
381cc
412cc
411cc
0.24mm/N
0.26mm/N
0.11mm/N
0.31mm/N
11.7 T-M
11.1 T-M
12.2 T-M
16.0 T-M
46 grams
70 grams
87 grams
70 grams
91
76
94
95
5.2mm
4.5mm
5.0mm
4.8mm
519.5 cm2
856 cm2
823.7 cm2
856.3 cm2
9.8mm
8.5mm
8.0mm
9.5mm
31-35 liters/ 1.1-1.3 cu.ft.
45-82 liters/ 1.6-2.9 cu.ft.
40-71 liters/1.4-2.5 cu.ft.
54-65 liters/ 1.9-2.3 cu.ft.
42.5-85 liters/ 1.5-3 cu.ft.
85-119 liters/ 3-4.2 cu.ft.
45-170 liters/1.6-6.0 cu.ft.
54-159 liters/ 1.9-5.6 cu.ft.
12.03”, 305.5mm
15.32”, 389.1mm
15.15”, 384.81mm
15.21”, 386.4mm
10.95”, 278.1mm
14.0”, 355.6mm
13.87”,352.3mm
14.0”, 355.3mm
Fitted as standard
Fitted as standard
Fitted as standard
Fitted as standard
N/A
Fitted as standard
N/A
Fitted as standard
0.25”, 6.4mm
0.28”, 7.0mm
0.25”, 6.4mm
0.28”, 7.1mm
11.59”, 294.3mm
14.56”, 369.9mm
14.56”, 369.8mm
14.56”, 369.9mm
5.1”, 130mm
6.9”, 175mm
6.25”, 159mm
6.5”, 165mm
4.1 lbs., 1.9 kg
5.7 lbs., 2.6 kg
11.9 lbs., 5.4 kg
17.3 lbs., 7.9 kg
5.8 lbs., 2.6 kg
7.9 lbs., 3.6 kg
14.1 lbs., 6.4 kg
19.4 lbs., 8.8 kg
Copper voice coil
Copper voice coil
Copper voice coil
Copper voice coil
Polyimide former
Polyimide former
Polyimide former
Polyimide former
Neodymium magnet
Neodymium magnet
Ferrite magnet
Ferrite magnet
Non-vented core
Vented core
Vented core
Pressed Steel basket
Paper Cone
Paper Cone
Treated Paper Cone
Paper Cone
Cloth cone edge
Cloth cone edge
Sealed Cloth Surround
Cloth cone edge
WWW.EMINENCE.COM
49
Configuration
Low End
Response
Low End
Shape
Mid-Range
Response
Mid-Range
Shape
High-End
Response
Volume/
Power
10" Open or Closed Back
10" Closed Back
12" Open Back
15" Open Back
Ragin Cajun
Delta Demon
Lil' Buddy
Black Powder
Swamp Thang
Commonwealth 12"
Commonwealth 15"
Red White and Blues
Screamin Eagle
Texas Heat
Lil' Texas
Cannabis Rex
Canis Major
Black Mountain
1 or 2 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, or 2 X 15"
1, or 2 X 12"
1, 2, or 4 X 12"
1, or 2 X 12"
1, 2, or 4 X 10"
1, 2, or 4 X 10"
1, 2, or 4 X 10"
1, 2, or 4 X 10"
Subdued
Aggressive
Aggressive
Aggressive
Aggressive
Aggressive
Moderate
Aggressive
Aggressive
Aggressive
Subdued
Aggressive
Moderate
Aggressive
Moderate
Tight
Fat/Round
Fat/Round
Tight
Fat/Chunky
Tight
Tight
Fat/Round
Fat/Round
Fat/Round
Tight
Fat/Round
Fat/Round
Chunky
Tight
Moderate
Moderate
Moderate
Aggressive
Aggressive
Moderate
Moderate
Moderate
Moderate
Aggressive
Moderate
Moderate
Subdued
Moderate
Aggressive
Warm
Warm
Warm
Crisp
Crisp
Crisp
Warm
Warm
Warm
Dark
Crisp
Warm
Dark
Crisp
Warm
Aggressive
Moderate
Moderate
Aggressive
Moderate
Aggressive
Aggressive
Moderate
Moderate
Moderate
Aggressive
Subdued
Subdued
Aggressive
Moderate
Louder
Loudest
Loudest
Louder
Louder
Louder
Louder
Louder
Louder
Loudest
Louder
Louder
Loud
Loudest
Louder
Medium
Slow
Slow
Fast
Very balanced with crisp mids and top end bite. Tight bottom end, very
American tonality.
Clean and full, with lots of body and sparkle. Smokey smooth with highend definition.
Clean, full vintage tone with fat, warm lows, woody mids and tame, smooth
highs
Vintage American voiced tone with tight lows and warm, smooth upper mid
emphasis and highs. Great single note lead tone
Medium
Nice tight low-end, smooth midrange and top end sparkle. American cousin
to The Governor.
Medium
Slow
Warm and rich, but also very clean and well defined. Great presence! Very
full and smooth. Very little cone break-up, but likes Overdrive.
Nice warm, fat tone with a little top end bite and clarity. Very touch sensitive with a hint of British flavor.
Slow
Warm and rich, but also very clean and well defined. Great presence! Very
full and smooth. Very little cone break-up, but likes Overdrive.
Medium
Slow
Very powerful, thick and chunky tone. Very touch sensitive with good
sustain. Awesome bottom end.
Bright and articulate tone with screamin top end and tight bass
Medium
Slow
A clean and full tone, slow to break-up, but crunchy when driven. Smoother and less defined than many 10 guitar speakers.
Raw and bright with tight bass and explosive mids and highs
Slow
Extremely balanced, dark, creamy smooth tone
Medium
Very loud, touch sensitive and responsive with nice bell sounding top end
and a little bite. Break-up Modes
Medium
Overall Coloration*
Extremely balanced vintage tone with a little country honk and a touch of
classic blues tone.
coming 2010. The maverick features flux density modulation (FDM) technology, exclusively from eminence. visit www.eminence.com for the latest updates to the tone guide.
Application
The Copperhead
maverick
Name
Up to 30 watts
Up to 50 watts
Up to 50 watts
Up to 125 watts
Up to 150 watts
Up to 50 watts
Up to 120 watts
Up to 150 watts
Up to 125 watts
Up to 150 watts
Up to 75 watts
Up to 50 watts
Up to 100 watts
Up to 75 watts
Up to 75 watts
Power Range
Lead/Rhythm Guitar
Blues, Classic Rock, Country
Country, Blues, Jazz, Classical,
Rock
Country, Jazz, Classical
Lead/Rhythm Guitar,
Acoustic Guitar,
Keyboard
Lead/Rhythm Guitar
Classic Rock, Blues, Country
American Rock, Blues, and
Southern Rock
Good club speaker for American
Blues and Rock
Classic American Rock tone of
the 60's and 70's
All genres
All genres
Very American tone suitable for
Blues, Rock, and Jazz
Southern Rock, College Rock,
Heavy Metal, and Grunge
Jazz, Rock, and Blues
Jazz, Delta Blues, and Classical
American Rock, Blues, and
Country
Country, Blues, Bluegrass,
and Funk
Genre of Music*
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm/Steel
Guitar
Lead/Rhythm/Steel
Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar,
Harmonica
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar,
Harmonica
Instrument*
*Coloration, Tone, and the appropriateness of a speaker for a specific genre of music are very subjective subjects. Eminence has dedicated countless hours to the tonal evaluation of each speaker in these two series. Additional listening tests
were also conducted by Greg Martin, lead guitarist for the Kentucky Headhunters and Steve Wilson of Ambient Sound, both recognized in the music industry as experts on the subject of guitar tone. This data is provided to be used as a general
guideline to aid in guitar speaker selection, however the suitability of a specific speaker for a specific purpose is a matter of personal taste and can only be determined by you the user. Eminence makes no guarantees regarding the suitability of
any speaker in these series for any specific application.
Guitar Speaker Tonal Characteristics and Application Guide
15" Open Back
Red Fang 10
Lynch Super V12
Private Jack
The Governor
Red Fang
The Tonker
Tonkerlite
The Wizard
Man O War
The Tonespotter
Big Ben
Legend 1028K
Legend 1058
Legend 1258
Legend V128
Legend GB128
Legend 1218
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 10"
1, 2, or 4 X 10"
1, or 2 X 15"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 12"
1, 2, or 4 X 10"
1, 2, or 4 X 10"
Aggressive
Moderate
Moderate
Subdued
Moderate
Subdued
Aggressive
Aggressive
Moderate
Aggressive
Aggressive
Aggressive
Moderate
Moderate
Moderate
Aggressive
Aggressive
Aggressive
Fat/Round
Fat/Round
Tight
Tight
Chunky
Tight
Fat/Round
Fat/Round
Chunky
Fat/Chunky
Fat/Round
Fat/Round
Chunky
Tight
Tight
Fat/Round
Chunky
Chunky
Moderate
Moderate
Moderate
Moderate
Moderate
Moderate
Subdued
Aggressive
Aggressive
Aggressive
Moderate
Moderate
Moderate
Aggressive
Moderate
Moderate
Moderate
Moderate
Warm
Warm
Warm
Warm
Warm
Warm
Dark
Warm
Crisp
Warm
Warm
Warm
Warm
Warm
Warm
Warm
Warm
Warm
Moderate
Moderate
Moderate
Aggressive
Moderate
Aggressive
Moderate
Moderate
Aggressive
Aggressive
Aggressive
Moderate
Aggressive
Moderate
Aggressive
Moderate
Aggressive
Aggressive
Louder
Louder
Louder
Louder
Louder
Loud
Louder
Louder
Loudest
Loudest
Loudest
Loudest
Loudest
Loudest
Louder
Louder
Loudest
Louder
Medium
Slow
Medium
Medium
Very articulate, but with a hint of grit. Nice sustain and exceptionally good
tight bottom. Cross between Private Jack and The Governor
A proven and revered sound, very loud and responsive/articulate in every
register. Chunky and solid sound with a little top end sparkle
Very smooth and warm with a fat bottom end and highs that cut through the
mix. Warm and thick overtones
A very big, clean and warm British sound. A somewhat throaty tone with fat
bass and smooth highs.
Medium
Medium
Medium
Medium
Medium
Vintage American tone with punchy lows and warm, smooth, bluesy mids and
highs. Fatter Legend 1028K tone with more depth.
Vintage American tone with tight lows and warm, smooth mids and highs.
Strong upper mid emphasis and extended highs.
Balanced, more mellow British sound with warm, smooth mids and highs
and tight lows.
Cleaner British voiced tone with a full low end, warm, throaty mids and a
very open top end. A cleaner Private Jack tone with a fatter low end.
Very balanced, fat, round, punchy lows and warm, smooth mids and lows,
very clean and articulate.
Fast
Medium
A nice round, balanced tone like the Tonker, but with extended top end and
less lower-mid meat.
Vintage American tone with moderate, but tight, percussive lows and
extended highs.
Medium
Fast
A very fat, clean and warm tone through the mid-range, smooth top end
Vintage British sound with warm undertones and high-end sparkle
Fast
Medium
Thick and smooth, with lots of mids and extended highs. Very well balanced
speaker. Classic British flavor
Classic British tone. Thick and raunchy with lots of mids
Medium
Medium
Vintage British tone with loads of detail, chime and grit and a nicely defined
low end
Very full, clean and warm tone with nice presence and control
Medium
Very loud, gutsy, and meaty tone with singing highs and nice, clear
overtones
coming 2010. The reignmaker features flux density modulation (FDM) technology, exclusively from eminence. visit www.eminence.com for the latest updates to the tone guide.
Ramrod
reignmaker
Up to 150 watts
Up to 50 watts
Up to 120 watts
Up to 75 watts
Up to 75 watts
Up to 35 watts
Up to 225 watts
Up to 75 watts
Up to 120 watts
Up to 75 watts
Up to 125 watts
Up to 150 watts
Up to 50 watts
Up to 75 watts
Up to 50 watts
Up to 150 watts
Up to 50 watts
Up to 75 watts
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar,
Harmonica
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar,
Harmonica
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Lead/Rhythm Guitar
Country, Blues, Rock, Jazz
Country, Blues, Rock
Blues, Rock, Heavy Metal
Blues, Rock
Country, Blues, Rock, Jazz
Country, Blues, Rock
Delta Blues, Texas Blues, Jazz,
and Country
Authentic British flavor well
suited for Blues and Classic
Rock
Great for College Rock, Classic
Rock, Grunge, and Heavy Metal
Classic Rock tones of the 60's
and 70's
Blues, Southern Rock, Country
English Rock, Southern
Rock, Country (Great with a
Telecaster)
Vintage classic British tone for
Blues, Country, Indie and Jazz
Classic British Rock tone of the 60's and 70's
Classic British tone for Blues,
Indie, Jazz
Blues, Rock, Country, Jazz
Vintage classic British tone
for blues, country, rock, indie
and jazz
British Rock and Blues, Country
and Jazz
UNDERSTANDING LOUDSPEAKER DATA
The ability to choose the most appropriate loudspeaker for a particular enclosure is directly related to your understanding of the performance data that
manufacturers provide with their products. Prior to 1970, there were no easy or affordable methods accepted as standard in the industry for obtaining this data.
The recognized methods were expensive and often unrealistic for the thousands of individuals needing loudspeaker performance information.
Thiele-Small parameters
In the early seventies, several technical papers were
presented to the AES (Audio Engineering Society) that
resulted in the development of what we know today
as “Thiele-Small Parameters”. These papers were
authored by A.N. Thiele, and Richard H. Small.
The Thiele and Small papers concentrated on
showing how the following parameters define the
relationship between a speaker and a particular
enclosure. Eminence recommends that you develop
a basic understanding for the meaning of each
parameter so that you can make informed decisions
when choosing your loudspeakers.
Fs
This parameter is the free-air resonant
frequency of a speaker. Simply stated, it is the
point at which the weight of the moving parts of the
speaker becomes balanced with the force of the
speaker suspension when in motion. It is important
to know this information so that you can prevent your
enclosure from ringing like a bell when it reaches
its resonant frequency. As a general rule of thumb,
a lower Fs indicates a woofer that would be better
for low-frequency reproduction than a woofer with
a higher Fs. However, other parameters affect the
ultimate performance of a woofer as well and may
make a speaker with a higher Fs a better candidate
for your application.
Re
This parameter is very simply the DC resistance
of the driver in question. In other words, this
measurement is made with an ohm meter and is
often referred to as the “DCR”. This measurement
will almost always be less than the impedance
listed by the manufacturer. Many consumers get
concerned when they see that the Re is less than the
published impedance and fear that their amplifier
is getting a load that is too heavy. Due to the fact
that the inductance of a speaker rises with a rise in
frequency, it is not likely that the amplifier will often
see the DC resistance as its load.
Le
This parameter is the voice coil inductance
of the speaker measured in millihenries (mH). The
industry standard is to measure inductance at 1,000
Hz. This is a difficult parameter to explain, but
basically as frequencies get higher there will be a rise
in impedance above the DC resistance rating. This
can be attributed to the fact that the voice coil is
acting as an inductor. Consequently, the impedance
of a speaker is not a fixed resistance, but can be
represented as a curve that changes as the input
52
frequency changes. Maximum impedance or Zmax
occurs at Fs.
Qts, Qes, and Qtc are all
measurements related to the control of a speaker’s
suspension when it reaches the resonant frequency.
is a measurement of the control coming
from the speaker’s mechanical suspension system;
the surround and spider.
Qes
is a measurement of the control coming from
the speaker’s electrical suspension system; the voice
coil and magnet.
Qts
is called the “Total Q” of the driver and is
derived from an equation where Qes is multiplied by
Qms and the result is divided by the sum of the same.
The result is Qts. As a general guideline, woofers fall
into three categories relative to their Qts:
1. Qts of .4 or below indicates a woofer well suited
for a vented enclosure.
2. Qts between .4 and .7 indicates a woofer well
suited for a sealed enclosure.
3. Qts of .7 or above indicates a woofer well suited
for free-air or infinite baffle applications.
These suggestions are simply rules of thumb and do
not always apply. For instance, the Eminence Kilomax
18 has a Qts of .56 that would indicate a sealed
enclosure, but we know that the Kilomax is one of
the most highly regarded woofers in the Professional
Audio industry for a ported enclosure.
Vas/Cms
Vas (Not to be confused with
the recommended enclosure size.) represents
the equivalent stiffness in an air volume to the
force of the compliance (Cms) of the suspension
in a particular speaker. It is one of the trickiest
parameters to measure. Air changes relative to
humidity and temperature. Cms is measured in
meters per Newton. It is the force exerted by the
mechanical suspension of the speaker. It is simply
a measurement of its stiffness.
Vd
Expressed in Tesla meters is a measurement
of the motor strength of a speaker. This is created
Q Parameters
Qms
Bl
This parameter is the Peak Diaphragm
Displacement Volume. It is the Xmax (Voice Coil
Overhang) of the driver multiplied by the Sd (Surface
area of the cone). Simply stated it is a measurement
of how much air the cone will move at full excursion
and is usually noted in cc.
by the product of the magnetic field strength times
the length of wire in the field. If you were to take
a given mass, that when placed on the cone of a
speaker would move the cone downward from its
home position, then measure the current in amperes
required to move the cone back to home position,
you can calculate Bl. The formula is Ma in grams
divided the current in amperes.
Mms
This parameter is the combination of the
weight of the cone assembly plus the driver radiation
mass load. Confusing…but the weight of the cone
assembly is easy. Most manufacturers know that
weight when the speaker is designed. It is the sum
of the weight of the cone assembly components. The
driver radiation mass load is the confusing part. In
simple terminology, it is the weight of the air that the
cone will have to push. Air certainly has mass and
needs to be recognized in these calculations.
Rms
This parameter represents the mechanical
resistance of a driver’s suspension losses. It is a
measurement of the absorption qualities of the
speaker suspension and is stated in N*sec/m.
EBP
This measurement represents Fs / Qe. It is
used in many enclosure design formulas to determine
if a speaker is more suitable for a closed or vented
design. An EBP close to 100 usually indicates a
speaker that is best suited for a vented enclosure.
On the contrary, an EBP closer to 50 usually indicates
a speaker best suited for a closed box design.
Xmax
Short for Maximum Linear Excursion.
Speaker output becomes non-linear when the voice
coil begins to leave the magnetic gap. Although
suspensions can create non-linearity in output, the
point at which the number of turns in the gap (see
Bl) begins to decrease is when distortion starts to
increase. Some manufacturers have often used the
maximum excursion of the speaker which when
exceeded would result in mechanical damage. This
parameter is recognized as Xlim. The bottom line is;
be sure you are comparing apples to apples. Most
manufacturers will specify the way this measurement
is obtained. Distortion is typically very audible before
Xlim is reached due to the increase in non-linearity in
the motor and suspensions.
Continued on page 54.
Parts Express stocks more Eminence drivers than anyone — along with
more than 12,000 audio, video and speaker building components!
Visit parts-express.com or call
to order your FREE 2010 catalog!
725 Pleasant Valley Dr. Springboro, OH 45066
1-800-338-0531
53
UNDERSTANDING LOUDSPEAKER DATA, continued from page 52.
Sd
This is important because it requires 2 times the
Generally speaking, the number one contributor to
cone, normally given in square cm.
power to increase the volume of a speaker 3 dB.
a transducer’s ability to handle power is its ability
Zmax
To increase the volume of a 50-watt guitar amplifier 3
characteristics are affected by several design choices,
dB (an audible, but relatively small amount), it would
but most notably voice coil size, magnet size, venting,
the DCR of the driver.
require a total of 100 watts of power. The same
and the adhesives used in voice coil construction.
Additional Performance Data
with one that is 3 dB more sensitive (usually a more
Larger coil and magnet sizes provide more area for
economical alternative).
heat to dissipate, while venting allows thermal energy
This parameter is the actual surface area of the
to release thermal energy. Those loudspeaker
This parameter represents the speaker’s
impedance at resonance and it is usually many times
thing could be achieved by replacing the speaker
In addition to Thiele-Small Parameters, loudspeaker
manufacturers typically publish additional
measurements and performance information. Again,
it is wise to become familiar with this data and what
it actually means to you.
This data
is relatively self-explanatory. It is the frequency
to escape and cooler air to enter the motor structure.
Most manufacturers determine sensitivity by putting
Equally important is the ability of the voice coil to
the speaker in a baffle and measuring the sound
handle thermal energy. Eminence is well known
pressure level inside an anechoic chamber at a
for the use of proprietary adhesives and voice coil
distance of one meter, with 1 watt of input power
components that maximize the coil’s ability to handle
across the frequency response curve. A loudspeaker
extreme temperatures.
measurement software program then would
generally calculate the average sound pressure level
Mechanical factors must also be considered when
over the response curve. This is a good method
determining power handling. A transducer might
and usually very accurate. The problem is that one
be able to handle 1,000 watts from a thermal
manufacturer may place the microphone one meter
perspective, but would fail long before that level
industry, but can lend different results.
from the dust cap of the speaker and gain a distinct
was reached from a mechanical issue such as the
advantage over the manufacturer who placed the
coil hitting the back plate, the coil coming out of
Eminence response curves are measured as follows:
microphone one meter from the baffle board. Again,
the gap, the cone buckling from too much outward
be sure you understand how this specification was
movement, or the spider bottoming on the top plate.
derived.
Be sure to consider the suggested usable frequency
range for which Eminence feels the device will prove
useful. Each manufacturer uses different techniques
for determining “Usable Frequency Range”. Most
methods are recognized as acceptable in the
All speakers are tested at 1W/1m using a variety of
test set-ups for the appropriate impedance. [LMS
using 0.25” supplied microphone (software calibrated)
mounted 1m from wall/baffle.] [2 ft. X 2 ft. baffle is
built into the wall with the speaker mounted flush
against a steel ring for minimum diffraction.] [Hafler
P1500 Trans-Nova amplifier] [2,700 cu. ft. anechoic
chamber with fiberglass on all six surfaces (three
with custom-made wedges).]
Spl
(Average Sensitivity) This data represents one
of the most useful specifications published for any
transducer. It is a representation of the output you
can expect from a device relative to the input power.
range and the Xlim parameter in conjunction with
The Eminence method represents the average output
the power rating and enclosure design to avoid such
across the usable frequency range when applying
failures.
1W/1m into the nominal impedance. Ie 2.83V/8ohms,
The Eminence power rating is derived using an EIA
4V/16ohms.
Power Rating
426A noise source and test standard. All tests are
This specification is very
conducted for 8 hours in a free-air, non-temperature
important to transducer selection. Obviously, you
controlled environment. The Eminence Music
need to choose a loudspeaker that is capable of
Program rating is double that of our standard Watts
handling the input power you are going to provide.
rating.
By the same token, you can destroy a loudspeaker by
using too little power.
designing enclosures
Eminence Designer is a state-of-the-art loudspeaker enclosure design program
for PCs. It can calculate a box design that will bring out the best response from a loudspeaker
in seconds - it can even suggest a box for your loudspeaker! Eminence Designer models
closed, vented, bandpass and passive radiator boxes. It will print box drawings and graphs for
a professional presentation. Eminence designer is quick to learn and easy to use.
1. Enter the loudspeaker parameters (for Eminence loudspeakers, simply select the model;
other loudspeaker parameters can be entered manually).
2. Calculate the box volume and tuning. This is very easy with the help of the
“Suggest” button.
3. Evaluate the performance from the nine graphs.
When the program is first run, a “Welcome” window will appear to help you configure the
program and to guide you through its illustrated online manual. The online manual contains
a “Box Designers Guide” to help beginners learn about sound, speakers and box design.
A “Reference” section describe every feature of the program.
To learn more visit www.eminence.com/resources/designer.asp.
54
THE ART AND SCIENCE OF SOUND

Eminence catalog 2010

Transcription

Similar documents

ragin cajun

PDF 1 - Eminence

loudspeaker selection guide